47 modules in Technology: OAM
| Module | Description |
|---|---|
| ELTEX-CFM-MIB | Eltex Connectivity Fault Management MIB for managing IEEE 802.1ag CFM domains, MEPs, and OAM operations on Eltex devices. |
| ELTEX-DOT3-OAM-MIB | Eltex 802.3ah OAM MIB for managing Ethernet Operations, Administration, and Maintenance on Eltex device link segments. |
| ELTEX-MES-CFM-MIB | Eltex MES CFM MIB for managing 802.1ag Connectivity Fault Management domains, MEPs, and OAM test operations. |
| ELTEX-MES-DOT3-OAM-MIB | Eltex MES 802.3ah OAM MIB for configuring Ethernet link OAM, remote failure indication, and loopback testing. |
| ENTERASYS-ETH-OAM-EXT-MIB | Enterasys Networks proprietary extension to the IEEE 802.3ah Ethernet OAM MIB providing additional OAM configuration objects. |
| ENTERASYS-IEEE8021-CFM-EXT-MIB | Enterasys Networks proprietary extension to the IEEE 802.1ag CFM MIB for Ethernet connectivity fault management. |
| F3-CFM-MIB | ADVA Optical Networking F3 platform MIB for IEEE 802.1ag Connectivity Fault Management OAM operations on FSP 150 devices. |
| F3-ELMI-MIB | ADVA Optical Networking F3 platform MIB for Ethernet Local Management Interface (E-LMI) protocol status and UNI management. |
| H3C-BFD-STD-MIB | H3C MIB for Bidirectional Forwarding Detection (BFD) sessions monitoring link failure detection state and statistics. |
| H3C-MPLSOAM-MIB | H3C MIB for MPLS OAM (Operations, Administration, and Maintenance) managing LSP connectivity verification and fault isolation. |
| H3C-MPLSOAM-PS-MIB | H3C MIB for MPLS OAM protection switching managing path protection and failover for MPLS LSPs. |
| H3C-NQA-MIB | H3C MIB for Network Quality Analyzer (NQA) managing test instances measuring network performance and SLA metrics. |
| HH3C-DOT3-EFM-EPON-MIB | Covers OLT and ONU port management for IEEE 802.3ah EFM EPON (Ethernet Passive Optical Network) on H3C access platforms. |
| HH3C-EFM-COMMON-MIB | Provides common EFM (Ethernet in the First Mile) management objects shared across H3C EFM interface types. |
| HH3C-MINM-MIB | Manages H3C Multicast IN Multicast (MINM) tunneling for delivering multicast over unicast network paths. |
| HH3C-MPLSOAM-MIB | Manages MPLS OAM functions including LSP ping and BFD-based continuity checks on H3C MPLS networks. |
| HH3C-MPLSOAM-PS-MIB | Manages MPLS OAM protection switching (PS) for fast LSP failover and redundancy on H3C transport networks. |
| HP-ICF-BFD-MIB | HP ICF SNMP MIB for Bidirectional Forwarding Detection (BFD) session configuration and status on HP ProCurve routing switches. |
| HP-ICF-DLDP-MIB | HP ICF SNMP MIB for Device Link Detection Protocol (DLDP) to detect unidirectional links on HP ProCurve switch ports. |
| HP-ICF-FAULT-FINDER-MIB | HP ICF SNMP MIB for the Fault Finder feature detecting common cabling and configuration faults on HP ProCurve switch ports. |
| HP-ICF-LINKTEST | HP ICF SNMP MIB for link test diagnostics triggering cable and connectivity tests on HP ProCurve switch ports. |
| HP-ICF-UDLD-MIB | HP ICF SNMP MIB for Unidirectional Link Detection (UDLD) configuration and port state on HP ProCurve switches. |
| HPICF-IPSLA-MIB | HP ICF SNMP MIB for IP SLA probe configuration and performance measurement results on HP ProCurve network devices. |
| HPN-ICF-BFD-STD-MIB | HP Networking ICF SNMP MIB implementing RFC-standard Bidirectional Forwarding Detection (BFD) session management on HP networking devices. |
| HPN-ICF-DLDP-MIB | HP Networking ICF SNMP MIB for Device Link Detection Protocol (DLDP) detecting one-way link failures on HP networking devices. |
| HPN-ICF-DLDP2-MIB | HP Networking ICF SNMP MIB version 2 for Device Link Detection Protocol (DLDP) with enhanced port state on HP networking devices. |
| HPN-ICF-EFM-COMMON-MIB | Defines common management objects for Ethernet in the First Mile (EFM/IEEE 802.3ah) OAM on HP/Comware devices. |
| HPN-ICF-MPLSOAM-MIB | Manages MPLS OAM BFD/LSP-ping detection and continuity-check sessions on HP/Comware MPLS networks. |
| HPN-ICF-MPLSOAM-PS-MIB | Manages MPLS OAM protection switching (PS) groups and failover policies for LSP redundancy on HP/Comware devices. |
| HUAWEI-ATM-OAM-MIB | Huawei ATM OAM (Operations, Administration, and Maintenance) MIB for configuring and monitoring ATM F4/F5 OAM cell flows and loopback tests. |
| HUAWEI-CE-PING-MIB | Huawei CE-ping (customer edge ping) MIB for initiating and monitoring end-to-end connectivity tests across Layer 2 VPN circuits. |
| HUAWEI-ETHOAM-MIB | Huawei Ethernet OAM MIB for managing IEEE 802.3ah and IEEE 802.1ag OAM functions including link monitoring, remote loopback, and fault notification. |
| HUAWEI-IPFPM-MIB | Huawei IPFPM (IP Flow Performance Measurement) MIB for measuring packet loss, delay, and jitter on IP flows per Y.1731 and RFC 6374. |
| HUAWEI-IPLPM-MIB | Huawei IPLPM (IP Loss and Performance Measurement) MIB providing objects to configure and retrieve IP packet loss ratio measurement sessions. |
| HUAWEI-L2VPN-OAM-MIB | Huawei L2VPN OAM MIB providing operations, administration, and maintenance objects for fault detection and performance monitoring on L2VPN services. |
| HUAWEI-MPLSOAM-MIB | Huawei MPLS OAM (Operations, Administration, and Maintenance) MIB for LSP connectivity verification and fault detection. |
| HUAWEI-MPLSOAM-PS-MIB | Huawei MPLS OAM protection switching MIB for managing LSP protection groups and switchover events. |
| HUAWEI-TWAMP-MIB | Huawei TWAMP (Two-Way Active Measurement Protocol) MIB for managing TWAMP test sessions and round-trip delay measurements. |
| IEEE8021-CFM-MIB | IEEE 802.1 MIB for Connectivity Fault Management (CFM/802.1ag) providing OAM maintenance domain and MEP management. |
| IEEE8021-CFM-V2-MIB | IEEE 802.1 MIB version 2 for Connectivity Fault Management (802.1ag) providing updated OAM domain and MEP management objects. |
| IEEE8021-CFMD8-MIB | IEEE 802.1 MIB for CFM draft 8 providing Connectivity Fault Management objects for maintenance domains and endpoints. |
| IEEE8021-DDCFM-MIB | IEEE 802.1 MIB for draft D Connectivity Fault Management providing OAM management objects for an earlier CFM specification. |
| IEEE8021-TEIPS-MIB | IEEE 802.1 MIB for Traffic Engineering Instance Protection Switching (TEIPS) managing protection paths in PBB-TE networks. |
| IEEE8021-TEIPS-V2-MIB | IEEE 802.1 MIB version 2 for Traffic Engineering Instance Protection Switching providing updated PBB-TE protection management. |
| IEEE802171-CFM-MIB | IEEE 802.1 MIB for Connectivity Fault Management based on IEEE 802.17.1 providing OAM objects for an early CFM specification. |
| ME1200-EPS-MIB | Cisco ME1200 Metro Ethernet switch MIB for Ethernet Protection Switching (EPS) configuration and monitoring per ITU-T G.8031. |
| ME1200-PERF-MONITOR-MIB | Cisco ME1200 Metro Ethernet switch MIB for performance monitoring of Ethernet service statistics including throughput and error counters. |