All MIBs › H3C-NQA-MIB
Organization: Huawei 3Com Technologies Co., Ltd.
Last Updated: 2006-08-14
Category: Technology: OAM, Vendor: H3C/HH3C
Description: H3C MIB for Network Quality Analyzer (NQA) managing test instances measuring network performance and SLA metrics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is H3C-NQA-MIB?
H3C-NQA-MIB is an H3C (Huawei-3Com) proprietary MIB implementing NQA (Network Quality Analyzer, H3C's analog to Cisco IP SLA), supplementing RFC 2925's ping/traceroute MIB with richer test types. Its control table, keyed by test, records target/source port, TTL, jitter-test admin interval and packet count, HTTP operation type/string, FTP operation type/username/password/operation string, VPN instance, history retention time/enable, an ICPIF (voice-quality impairment factor) advance factor, and codec type, while a results table reports jitter/RTT statistics including disconnect, timeout, busy, and no-connection counts. As a diagnostic/performance MIB it lets an administrator run HTTP/FTP/jitter test operations and assess voice-quality impact via ICPIF. It is deployed on H3C (Huawei-3Com) routers/switches running NQA tests. Engineers can download the H3C-NQA-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-NQA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C (Huawei-3Com) routers/switches (NQA active testing)
Monitoring Examples
An administrator configures an H3C NQA jitter test with h3cNqaCtlCodecType set to match the deployed codec, then reviews h3cNqaResultsRttNumDisconnects to assess voice-call quality across a WAN link.
What Can Be Monitored
- NQA HTTP/FTP/jitter test results and voice-quality impairment factor
This MIB depends on
Related MIBs
Imported Objects
From DISMAN-PING-MIB
| pingCtlDescr | OBJECT-TYPE |
| pingCtlEntry | OBJECT-TYPE |
| pingCtlOwnerIndex | OBJECT-TYPE |
| pingCtlTargetAddress | OBJECT-TYPE |
| pingCtlTargetAddressType | OBJECT-TYPE |
| pingCtlTestName | OBJECT-TYPE |
| pingCtlType | OBJECT-TYPE |
From HUAWEI-3COM-OID-MIB
| h3cRhw | OBJECT-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus |
How to Use in IPNetwork Monitor
Example using h3cNqaJitterStatsNumOfRTT OID:
Select an H3C router/switch (NQA active network quality testing) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cNqaJitterStatsNumOfRTT into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of received destination device responses with which jitter test can reach round-trip time. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| h3cNqa | 1.3.6.1.4.1.2011.10.8.3 | The private mib file includes the test information of the device. It is supplementary for rfc2925.txt. | ||
| h3cNqaObjects | 1.3.6.1.4.1.2011.10.8.3.1 | |||
| STR h3cNqaMIBVersion | 1.3.6.1.4.1.2011.10.8.3.1.1 | DisplayString | read-only | Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB' |
| h3cNqaCtlTable | 1.3.6.1.4.1.2011.10.8.3.1.2 | not-accessible | Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. | |
| h3cNqaCtlEntry | 1.3.6.1.4.1.2011.10.8.3.1.2.1 | not-accessible | Defines an entry in the h3cNqaCtlTable. The operation of this table is same as that of pingResultsTable. | |
| I32 h3cNqaCtlTargetPort | 1.3.6.1.4.1.2011.10.8.3.1.2.1.1 | Integer32 | read-create | The destination port that may be used by udpEcho, tcpConnect and jitter probes. |
| I32 h3cNqaCtlSourcePort | 1.3.6.1.4.1.2011.10.8.3.1.2.1.2 | Integer32 | read-create | The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port. |
| I32 h3cNqaCtlTTL | 1.3.6.1.4.1.2011.10.8.3.1.2.1.3 | Integer32 | read-create | Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe. |
| I32 h3cNqaCtlJitterAdminInterval | 1.3.6.1.4.1.2011.10.8.3.1.2.1.4 | Integer32 | read-create | Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test. |
| I32 h3cNqaCtlJitterAdminNumPackets | 1.3.6.1.4.1.2011.10.8.3.1.2.1.5 | Integer32 | read-create | Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test. |
| INT h3cNqaCtlHttpOperationType | 1.3.6.1.4.1.2011.10.8.3.1.2.1.6 | INTEGER | read-create | Http operation type: get or post. |
| STR h3cNqaCtlHttpOperationString | 1.3.6.1.4.1.2011.10.8.3.1.2.1.7 | DisplayString | read-create | Http operation string. For example, if the http operation type is get, the string will be url, home page and http version. |
| INT h3cNqaCtlFtpOperationType | 1.3.6.1.4.1.2011.10.8.3.1.2.1.8 | INTEGER | read-create | Ftp operation type. |
| STR h3cNqaCtlFtpUsername | 1.3.6.1.4.1.2011.10.8.3.1.2.1.9 | DisplayString | read-create | Ftp username. |
| STR h3cNqaCtlFtpPassword | 1.3.6.1.4.1.2011.10.8.3.1.2.1.10 | DisplayString | read-create | Ftp password. |
| STR h3cNqaCtlFtpOperationString | 1.3.6.1.4.1.2011.10.8.3.1.2.1.11 | DisplayString | read-create | Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server. |
| STR h3cNqaCtlVPNInstance | 1.3.6.1.4.1.2011.10.8.3.1.2.1.12 | DisplayString | read-create | VPN name by which system finds route in the specified VPN to send NQA probe packets. |
| I32 h3cNqaCtlHistoryKeptTime | 1.3.6.1.4.1.2011.10.8.3.1.2.1.13 | Integer32 | read-create | To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped. |
| INT h3cNqaCtlHistoryEnable | 1.3.6.1.4.1.2011.10.8.3.1.2.1.14 | INTEGER | read-create | To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded. |
| I32 h3cNqaCtlICPIFAdvFactor | 1.3.6.1.4.1.2011.10.8.3.1.2.1.15 | Integer32 | read-create | The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------| |
| INT h3cNqaCtlCodecType | 1.3.6.1.4.1.2011.10.8.3.1.2.1.16 | INTEGER | read-create | To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. |
| h3cNqaResultsTable | 1.3.6.1.4.1.2011.10.8.3.1.3 | not-accessible | Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the h3cNqaResultsTable. The operation of this table is same as that of pingResultsTable. | |
| h3cNqaResultsEntry | 1.3.6.1.4.1.2011.10.8.3.1.3.1 | not-accessible | The operation of this table is same as that of pingResultsTable. | |
| U32 h3cNqaResultsRttNumDisconnects | 1.3.6.1.4.1.2011.10.8.3.1.3.1.1 | Unsigned32 | read-only | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| U32 h3cNqaResultsRttTimeouts | 1.3.6.1.4.1.2011.10.8.3.1.3.1.2 | Unsigned32 | read-only | The number of times that a NQA probe failed because the probe timed out. |
| U32 h3cNqaResultsRttBusies | 1.3.6.1.4.1.2011.10.8.3.1.3.1.3 | Unsigned32 | read-only | The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency. |
| U32 h3cNqaResultsRttNoConnections | 1.3.6.1.4.1.2011.10.8.3.1.3.1.4 | Unsigned32 | read-only | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| U32 h3cNqaResultsRttDrops | 1.3.6.1.4.1.2011.10.8.3.1.3.1.5 | Unsigned32 | read-only | The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources. |
| U32 h3cNqaResultsRttSequenceErrors | 1.3.6.1.4.1.2011.10.8.3.1.3.1.6 | Unsigned32 | read-only | The number of packets arrived out of sequence. |
| U32 h3cNqaResultsRttStatsErrors | 1.3.6.1.4.1.2011.10.8.3.1.3.1.7 | Unsigned32 | read-only | The number of some other errors. |
| U32 h3cNqaResultsMaxDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.3.1.8 | Unsigned32 | read-only | The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0. |
| U32 h3cNqaResultsMaxDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.3.1.9 | Unsigned32 | read-only | The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0. |
| U32 h3cNqaResultsLostPacketRatio | 1.3.6.1.4.1.2011.10.8.3.1.3.1.10 | Unsigned32 | read-only | The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets. |
| U32 h3cNqaResultsPacketLateArrival | 1.3.6.1.4.1.2011.10.8.3.1.3.1.11 | Unsigned32 | read-only | The value of this object indicates the number of the packets that arrived after the timeout. |
| U32 h3cNqaResultsRttSum | 1.3.6.1.4.1.2011.10.8.3.1.3.1.12 | Unsigned32 | read-only | The sum of round trip time. |
| U32 h3cNqaResultsNumOfDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.3.1.13 | Unsigned32 | read-only | The number of delay from source to destination that are successfully measured. |
| U32 h3cNqaResultsMinDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.3.1.14 | Unsigned32 | read-only | The minimum of all one way times from source to destination. |
| U32 h3cNqaResultsSumDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.3.1.15 | Unsigned32 | read-only | The sum of one way times from source to destination. |
| U32 h3cNqaResultsSum2DelaySD | 1.3.6.1.4.1.2011.10.8.3.1.3.1.16 | Unsigned32 | read-only | The sum of squares of one way times from source to destination. |
| U32 h3cNqaResultsNumOfDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.3.1.17 | Unsigned32 | read-only | The number of delay from destination to source that are successfully measured. |
| U32 h3cNqaResultsMinDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.3.1.18 | Unsigned32 | read-only | The minimum of all one way times from destination to source. |
| U32 h3cNqaResultsSumDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.3.1.19 | Unsigned32 | read-only | The sum of one way times from destination to source. |
| U32 h3cNqaResultsSum2DelayDS | 1.3.6.1.4.1.2011.10.8.3.1.3.1.20 | Unsigned32 | read-only | The sum of squares of one way times from destination to source. |
| h3cNqaJitterStatsTable | 1.3.6.1.4.1.2011.10.8.3.1.4 | not-accessible | Statistics table for latest jitter activity. | |
| h3cNqaJitterStatsEntry | 1.3.6.1.4.1.2011.10.8.3.1.4.1 | not-accessible | An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is h3cNqajitter. | |
| C32 h3cNqaJitterStatsNumOfRTTEx | 1.3.6.1.4.1.2011.10.8.3.1.4.1.1 | Counter32 | read-only | The number of received destination device responses with which jitter test can reach round-trip time. |
| G32 h3cNqaJitterStatsMinOfPositivesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.2 | Gauge32 | read-only | The value of time that records the minimal positive jitter value from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsMaxOfPositivesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.3 | Gauge32 | read-only | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsNumOfPositivesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.4 | Gauge32 | read-only | The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination. |
| G32 h3cNqaJitterStatsSumOfPositivesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.5 | Gauge32 | read-only | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsSum2PositivesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.6 | Gauge32 | read-only | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsMinOfNegativesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.7 | Gauge32 | read-only | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsMaxOfNegativesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.8 | Gauge32 | read-only | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsNumOfNegativesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.9 | Gauge32 | read-only | The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination. |
| G32 h3cNqaJitterStatsSumOfNegativesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.10 | Gauge32 | read-only | The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination. |
| G32 h3cNqaJitterStatsSum2NegativesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.11 | Gauge32 | read-only | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| G32 h3cNqaJitterStatsMinOfPositivesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.12 | Gauge32 | read-only | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsMaxOfPositivesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.13 | Gauge32 | read-only | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsNumOfPositivesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.14 | Gauge32 | read-only | The number that records positive jitter times from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsSumOfPositivesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.15 | Gauge32 | read-only | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsSum2PositivesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.16 | Gauge32 | read-only | The value of time that records the sum of square of positive jitter values from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsMinOfNegativesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.17 | Gauge32 | read-only | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsMaxOfNegativesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.18 | Gauge32 | read-only | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsNumOfNegativesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.19 | Gauge32 | read-only | The number that records negative jitter times from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsSumOfNegativesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.20 | Gauge32 | read-only | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsSum2NegativesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.21 | Gauge32 | read-only | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| G32 h3cNqaJitterStatsPacketLossSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.22 | Gauge32 | read-only | The lost packets number sent from source to destination. |
| G32 h3cNqaJitterStatsPacketLossDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.23 | Gauge32 | read-only | The lost packets number sent from destination to source. |
| G32 h3cNqaJitterStatsAvePositivesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.24 | Gauge32 | read-only | The value of time that records the average positive jitter value from source to destination. |
| G32 h3cNqaJitterStatsAveNegativesSD | 1.3.6.1.4.1.2011.10.8.3.1.4.1.25 | Gauge32 | read-only | The value of time that records the average negative jitter value from source to destination. |
| G32 h3cNqaJitterStatsAvePositivesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.26 | Gauge32 | read-only | The value of time that records the average positive jitter value from destination to source. |
| G32 h3cNqaJitterStatsAveNegativesDS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.27 | Gauge32 | read-only | The value of time that records the average negative jitter value from destination to source. |
| G32 h3cNqaJitterStatsPktLossUnknown | 1.3.6.1.4.1.2011.10.8.3.1.4.1.28 | Gauge32 | read-only | The number of packets which is lost with unknown reason. |
| G32 h3cNqaJitterStatsOperOfICPIF | 1.3.6.1.4.1.2011.10.8.3.1.4.1.29 | Gauge32 | read-only | The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. |
| G32 h3cNqaJitterStatsOperOfMOS | 1.3.6.1.4.1.2011.10.8.3.1.4.1.30 | Gauge32 | read-only | The MOS (Mean Opinion Score) value for the latest jitter test. |
| INT h3cNqaAgentEnable | 1.3.6.1.4.1.2011.10.8.3.1.5 | INTEGER | read-write | Enable NQA agent function. |
| h3cNqaTcpServerTable | 1.3.6.1.4.1.2011.10.8.3.1.6 | not-accessible | A table which contains the status of NQA tcp server configuration information. | |
| h3cNqaTcpServerEntry | 1.3.6.1.4.1.2011.10.8.3.1.6.1 | not-accessible | A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port. | |
| IP h3cNqaTcpServerIpAddress | 1.3.6.1.4.1.2011.10.8.3.1.6.1.1 | InetAddress | not-accessible | Tcp server's ip address. |
| I32 h3cNqaTcpServerPort | 1.3.6.1.4.1.2011.10.8.3.1.6.1.2 | Integer32 | not-accessible | Tcp server's port number. |
| ROW h3cNqaTcpServerRowStatus | 1.3.6.1.4.1.2011.10.8.3.1.6.1.3 | RowStatus | read-create | h3cNqaTcpServerIpAddress and h3cNqaTcpServerPort must be set during a creation operation. |
| h3cNqaUdpServerTable | 1.3.6.1.4.1.2011.10.8.3.1.7 | not-accessible | Status of NQA udp server configuration information. | |
| h3cNqaUdpServerEntry | 1.3.6.1.4.1.2011.10.8.3.1.7.1 | not-accessible | This entry includes not only the udp server ip address but also the udp server udp port. | |
| IP h3cNqaUdpServerIpAddress | 1.3.6.1.4.1.2011.10.8.3.1.7.1.1 | InetAddress | not-accessible | Udp server's ip address. |
| I32 h3cNqaUdpServerPort | 1.3.6.1.4.1.2011.10.8.3.1.7.1.2 | Integer32 | not-accessible | Udp server's port number. |
| ROW h3cNqaUdpServerRowStatus | 1.3.6.1.4.1.2011.10.8.3.1.7.1.3 | RowStatus | read-create | h3cNqaUdpServerIpAddress and h3cNqaUdpServerPort must be set during a creation operation. |
| INT h3cNqaServerEnable | 1.3.6.1.4.1.2011.10.8.3.1.8 | INTEGER | read-write | Enable NQA server function. |
| I32 h3cNqaStatsMaxGroupNumber | 1.3.6.1.4.1.2011.10.8.3.1.9 | Integer32 | read-only | The maximum number saved per group. The maximum value of h3cNqaCtlStatisticsGroupNumber can not exceed the value of this object. |
| h3cNqaStatisticsCtlTable | 1.3.6.1.4.1.2011.10.8.3.1.10 | not-accessible | Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the h3cNqaStatisticsResultsTable and the h3cNqaGroupStatsJitterTable. | |
| h3cNqaStatisticsCtlEntry | 1.3.6.1.4.1.2011.10.8.3.1.10.1 | not-accessible | Defines an entry in the h3cNqaStatisticsCtlTable. The h3cNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a h3cNqaStatisticsCtlTable to correspond to the pingCtlEntry. | |
| U32 h3cNqaCtlStatisticsInterval | 1.3.6.1.4.1.2011.10.8.3.1.10.1.1 | Unsigned32 | read-create | Statistic information will be calculated after the time that is the value of h3cNqaCtlStatisticsInterval. |
| U32 h3cNqaCtlStatisticsGroupNumber | 1.3.6.1.4.1.2011.10.8.3.1.10.1.2 | Unsigned32 | read-create | The value of this object indicates the number of group saved. The length of this object is from 1 to h3cNqaStatsMaxGroupNumber. |
| U32 h3cNqaCtlStatisticsKeptTime | 1.3.6.1.4.1.2011.10.8.3.1.10.1.3 | Unsigned32 | read-create | To indicate how long the statistic information will be saved after the test stops. |
| DAT h3cNqaCtlBeginTime | 1.3.6.1.4.1.2011.10.8.3.1.10.1.4 | DateAndTime | read-create | Time at which the type-specified test will start. |
| U32 h3cNqaCtlLifeTime | 1.3.6.1.4.1.2011.10.8.3.1.10.1.5 | Unsigned32 | read-create | To indicate how long the type-specified test will last. |
| h3cNqaStatisticsResultsTable | 1.3.6.1.4.1.2011.10.8.3.1.11 | not-accessible | Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the h3cNqaStatisticsResultsTable. The statistic cycle is the value of h3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (H3cNqaStatisticsResultsEntry) belongs to. | |
| h3cNqaStatisticsResultsEntry | 1.3.6.1.4.1.2011.10.8.3.1.11.1 | not-accessible | Defines an entry in the h3cNqaStatisticsResultsTable. The h3cNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a h3cNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created. | |
| U32 h3cNqaStatResIndex | 1.3.6.1.4.1.2011.10.8.3.1.11.1.1 | Unsigned32 | not-accessible | An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). |
| IPt h3cNqaStatResIpTargetAddressType | 1.3.6.1.4.1.2011.10.8.3.1.11.1.2 | InetAddressType | read-only | This object indicates the type of address stored in the corresponding h3cNqaStatResIpTargetAddress object. |
| IP h3cNqaStatResIpTargetAddress | 1.3.6.1.4.1.2011.10.8.3.1.11.1.3 | InetAddress | read-only | This object represent the host address to be used at a remote host for performing a network analysis operation. |
| G32 h3cNqaStatResMinRtt | 1.3.6.1.4.1.2011.10.8.3.1.11.1.4 | Gauge32 | read-only | The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| G32 h3cNqaStatResMaxRtt | 1.3.6.1.4.1.2011.10.8.3.1.11.1.5 | Gauge32 | read-only | The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| G32 h3cNqaStatResAverageRtt | 1.3.6.1.4.1.2011.10.8.3.1.11.1.6 | Gauge32 | read-only | The average NQA probe round-trip-time (RTT). |
| C32 h3cNqaStatResProbeResponses | 1.3.6.1.4.1.2011.10.8.3.1.11.1.7 | Counter32 | read-only | The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received. |
| C32 h3cNqaStatResSentProbes | 1.3.6.1.4.1.2011.10.8.3.1.11.1.8 | Counter32 | read-only | The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent. |
| C32 h3cNqaStatResRttSumOfSquares | 1.3.6.1.4.1.2011.10.8.3.1.11.1.9 | Counter32 | read-only | This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received. |
| DAT h3cNqaStatResStartTime | 1.3.6.1.4.1.2011.10.8.3.1.11.1.10 | DateAndTime | read-only | This object contains the start time of the statistic. |
| G32 h3cNqaStatResInterval | 1.3.6.1.4.1.2011.10.8.3.1.11.1.11 | Gauge32 | read-only | This object contains the interval between two times of statistic. |
| C32 h3cNqaStatResRttNumDisconnects | 1.3.6.1.4.1.2011.10.8.3.1.11.1.12 | Counter32 | read-only | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| C32 h3cNqaStatResRttTimeouts | 1.3.6.1.4.1.2011.10.8.3.1.11.1.13 | Counter32 | read-only | The number of times that a probe failed because the probe timed out. |
| C32 h3cNqaStatResRttBusies | 1.3.6.1.4.1.2011.10.8.3.1.11.1.14 | Counter32 | read-only | The number of times that a NQA probe failed because errors related to sockets. |
| C32 h3cNqaStatResRttNoConnections | 1.3.6.1.4.1.2011.10.8.3.1.11.1.15 | Counter32 | read-only | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| C32 h3cNqaStatResRttDrops | 1.3.6.1.4.1.2011.10.8.3.1.11.1.16 | Counter32 | read-only | The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources. |
| C32 h3cNqaStatResRttSequenceErrors | 1.3.6.1.4.1.2011.10.8.3.1.11.1.17 | Counter32 | read-only | The number of packets arrived out of sequence. |
| C32 h3cNqaStatResRttErrors | 1.3.6.1.4.1.2011.10.8.3.1.11.1.18 | Counter32 | read-only | The number of other errors. |
| G32 h3cNqaStatResLostPacketRatio | 1.3.6.1.4.1.2011.10.8.3.1.11.1.19 | Gauge32 | read-only | The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets. |
| C32 h3cNqaStatResPacketLateArrival | 1.3.6.1.4.1.2011.10.8.3.1.11.1.20 | Counter32 | read-only | The value of this object reflects the number of the packets that arrived after the timeout. |
| C32 h3cNqaStatResRttSum | 1.3.6.1.4.1.2011.10.8.3.1.11.1.21 | Counter32 | read-only | This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received. |
| C32 h3cNqaStatResNumOfDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.11.1.22 | Counter32 | read-only | The number of one way times from source to destination that are successfully measured. |
| G32 h3cNqaStatResMinDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.11.1.23 | Gauge32 | read-only | The minimum one way times from source to destination. |
| G32 h3cNqaStatResMaxDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.11.1.24 | Gauge32 | read-only | The maximum one way times from source to destination. |
| C32 h3cNqaStatResSumDelaySD | 1.3.6.1.4.1.2011.10.8.3.1.11.1.25 | Counter32 | read-only | The sum of one way times from source to destination. |
| C32 h3cNqaStatResSum2DelaySD | 1.3.6.1.4.1.2011.10.8.3.1.11.1.26 | Counter32 | read-only | The sum of squares of one way times from source to destination. |
| C32 h3cNqaStatResNumOfDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.11.1.27 | Counter32 | read-only | The number of one way times from destination to source that are successfully measured. |
| G32 h3cNqaStatResMinDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.11.1.28 | Gauge32 | read-only | The minimum one way times from destination to source. |
| G32 h3cNqaStatResMaxDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.11.1.29 | Gauge32 | read-only | The maximum one way times from destination to source. |
| C32 h3cNqaStatResSumDelayDS | 1.3.6.1.4.1.2011.10.8.3.1.11.1.30 | Counter32 | read-only | The sum of one way times from destination to source. |
| C32 h3cNqaStatResSum2DelayDS | 1.3.6.1.4.1.2011.10.8.3.1.11.1.31 | Counter32 | read-only | The sum of squares of one way times from destination to source. |
| h3cNqaGroupStatsJitterTable | 1.3.6.1.4.1.2011.10.8.3.1.12 | not-accessible | Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of h3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (H3cNqaStatisticsResultsEntry) belongs to. | |
| h3cNqaGroupStatsJitterEntry | 1.3.6.1.4.1.2011.10.8.3.1.12.1 | not-accessible | An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is h3cNqajitter. | |
| U32 h3cNqaStatJitterIndex | 1.3.6.1.4.1.2011.10.8.3.1.12.1.1 | Unsigned32 | not-accessible | An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning h3cNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). |
| G32 h3cNqaStatJitterMinOfPosSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.2 | Gauge32 | read-only | The value of time that records the minimal positive jitter value from source to destination in jitter test. |
| G32 h3cNqaStatJitterMaxOfPosSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.3 | Gauge32 | read-only | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| C32 h3cNqaStatJitterNumOfPosSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.4 | Counter32 | read-only | The number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent from source to destination. |
| C32 h3cNqaStatJitterSumOfPosSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.5 | Counter32 | read-only | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| C32 h3cNqaStatJitterSumOfSquarePosSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.6 | Counter32 | read-only | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| G32 h3cNqaStatJitterMinOfNegSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.7 | Gauge32 | read-only | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| G32 h3cNqaStatJitterMaxOfNegSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.8 | Gauge32 | read-only | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| C32 h3cNqaStatJitterNumOfNegSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.9 | Counter32 | read-only | The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to destination. |
| C32 h3cNqaStatJitterSumOfNegSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.10 | Counter32 | read-only | The value of time that records the sum of negative jitter values from source to destination in the jitter test. |
| C32 h3cNqaStatJitterSumOfSquareNegSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.11 | Counter32 | read-only | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| G32 h3cNqaStatJitterMinOfPosDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.12 | Gauge32 | read-only | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| G32 h3cNqaStatJitterMaxOfPosDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.13 | Gauge32 | read-only | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| C32 h3cNqaStatJitterNumOfPosDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.14 | Counter32 | read-only | The number that records positive jitter times from destination to source in the jitter test. |
| C32 h3cNqaStatJitterSumOfPosDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.15 | Counter32 | read-only | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| C32 h3cNqaStatJitterSumOfSquarePosDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.16 | Counter32 | read-only | The value of time that records the sum of square of positive jitter values destination to source in the jitter test. |
| G32 h3cNqaStatJitterMinOfNegDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.17 | Gauge32 | read-only | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| G32 h3cNqaStatJitterMaxOfNegDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.18 | Gauge32 | read-only | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| C32 h3cNqaStatJitterNumOfNegDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.19 | Counter32 | read-only | The number that records negative jitter times from destination to source in the jitter test. |
| C32 h3cNqaStatJitterSumOfNegDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.20 | Counter32 | read-only | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| C32 h3cNqaStatJitterSumOfSquareNegDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.21 | Counter32 | read-only | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| C32 h3cNqaStatJitterPacketLossSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.22 | Counter32 | read-only | The lost packets number sent from source to destination. |
| C32 h3cNqaStatJitterPacketLossDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.23 | Counter32 | read-only | The lost packets number sent from destination to source. |
| G32 h3cNqaStatJitterAvePosSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.24 | Gauge32 | read-only | The value of time that records the average positive jitter value from source to destination. |
| G32 h3cNqaStatJitterAveNegSD | 1.3.6.1.4.1.2011.10.8.3.1.12.1.25 | Gauge32 | read-only | The value of time that records the average negative jitter value from source to destination. |
| G32 h3cNqaStatJitterAvePosDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.26 | Gauge32 | read-only | The value of time that records the average positive jitter value from destination to source. |
| G32 h3cNqaStatJitterAveNegDS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.27 | Gauge32 | read-only | The value of time that records the average negative jitter value from destination to source. |
| C32 h3cNqaStatJitterPktLossUnknown | 1.3.6.1.4.1.2011.10.8.3.1.12.1.28 | Counter32 | read-only | The number of packets which is lost with unknown reason. |
| G32 h3cNqaStatJitterMaxOfICPIF | 1.3.6.1.4.1.2011.10.8.3.1.12.1.29 | Gauge32 | read-only | The maximum of all ICPIF values in a statistic cycle for jitter test. |
| G32 h3cNqaStatJitterMinOfICPIF | 1.3.6.1.4.1.2011.10.8.3.1.12.1.30 | Gauge32 | read-only | The minimum of all ICPIF values in a statistic cycle for jitter test. |
| G32 h3cNqaStatJitterMaxOfMOS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.31 | Gauge32 | read-only | The maximum of all MOS values in a statistic cycle for jitter test. |
| G32 h3cNqaStatJitterMinOfMOS | 1.3.6.1.4.1.2011.10.8.3.1.12.1.32 | Gauge32 | read-only | The minimum of all MOS values in a statistic cycle for jitter test. |
| h3cNqaReactionTable | 1.3.6.1.4.1.2011.10.8.3.1.13 | not-accessible | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. | |
| h3cNqaReactionEntry | 1.3.6.1.4.1.2011.10.8.3.1.13.1 | not-accessible | Defines an entry in the h3cNqaReactionTable. The first two index elements identify the pingCtlEntry that a h3cNqaReactItemIndex belongs to. The third index element selects a single reaction. | |
| STR h3cNqaReactOwnerIndex | 1.3.6.1.4.1.2011.10.8.3.1.13.1.1 | SnmpAdminString | accessible-for-notify | The first index of h3cNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. h3cNqaReactOwnerIndex and h3cNqaReactTestName identify an existed test. |
| STR h3cNqaReactTestName | 1.3.6.1.4.1.2011.10.8.3.1.13.1.2 | SnmpAdminString | accessible-for-notify | The second index of h3cNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. h3cNqaReactOwnerIndex and h3cNqaReactTestName identify an existed test. |
| U32 h3cNqaReactItemIndex | 1.3.6.1.4.1.2011.10.8.3.1.13.1.3 | Unsigned32 | accessible-for-notify | The third index of h3cNqaReactionTable, it definitely identifies one of the reaction configurations for a test. |
| INT h3cNqaReactCheckedElement | 1.3.6.1.4.1.2011.10.8.3.1.13.1.4 | INTEGER | read-create | A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not h3cNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is h3cNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. |
| U32 h3cNqaReactThresholdUpperLimit | 1.3.6.1.4.1.2011.10.8.3.1.13.1.5 | Unsigned32 | read-create | This object defines an administrative upper-threshold value for h3cNqaReactCheckedElement. The value of this object is zero if h3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'. |
| U32 h3cNqaReactThresholdLowerLimit | 1.3.6.1.4.1.2011.10.8.3.1.13.1.6 | Unsigned32 | read-create | This object defines an administrative lower-threshold value for h3cNqaReactCheckedElement. The value of h3cNqaReactThresholdLowerLimit should be equal or less than the value of h3cNqaReactThresholdUpperLimit. The value of this object is zero if h3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'. |
| INT h3cNqaReactThresholdType | 1.3.6.1.4.1.2011.10.8.3.1.13.1.7 | INTEGER | read-create | This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by h3cNqaReactThresholdConsecNum, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by h3cNqaReactThresholdAccumNum, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'. |
| U32 h3cNqaReactThresholdConsecNum | 1.3.6.1.4.1.2011.10.8.3.1.13.1.8 | Unsigned32 | read-create | This object defines a consecutive threshold limit. The value is zero when h3cNqaReactThresholdType is not 'consecutive'. |
| U32 h3cNqaReactThresholdAccumNum | 1.3.6.1.4.1.2011.10.8.3.1.13.1.9 | Unsigned32 | read-create | This object defines an accumulative threshold limit. The value is zero when the h3cNqaReactThresholdType is not 'accumulative'. |
| INT h3cNqaReactActionType | 1.3.6.1.4.1.2011.10.8.3.1.13.1.10 | INTEGER | read-create | Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated |
| INT h3cNqaReactCurrentStatus | 1.3.6.1.4.1.2011.10.8.3.1.13.1.11 | INTEGER | read-only | Specifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry has met the h3cNqaReactThresholdType and the threshold value. belowThreshold - Specifies the reaction entry has disobeyed the h3cNqaReactThresholdType and the threshold value. |
| ROW h3cNqaReactRowStatus | 1.3.6.1.4.1.2011.10.8.3.1.13.1.12 | RowStatus | read-create | This object allows entries to be created and deleted in the h3cNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect. |
| U32 h3cNqaReactCheckedNum | 1.3.6.1.4.1.2011.10.8.3.1.13.1.13 | Unsigned32 | read-only | The number of checked element samples that are monitored. |
| U32 h3cNqaReactThresholdNum | 1.3.6.1.4.1.2011.10.8.3.1.13.1.14 | Unsigned32 | read-only | The number of checked element samples that are over threshold. |
| h3cNqaStatisticsReactionTable | 1.3.6.1.4.1.2011.10.8.3.1.14 | not-accessible | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. | |
| h3cNqaStatisticsReactionEntry | 1.3.6.1.4.1.2011.10.8.3.1.14.1 | not-accessible | Defines an entry in the h3cNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a h3cNqaReactItemIndex belongs to. The third index element identifies an entry in the h3cNqaStatisticsResultsTable. The forth index element selects a single reaction. | |
| STR h3cNqaStatReactOwnerIndex | 1.3.6.1.4.1.2011.10.8.3.1.14.1.1 | SnmpAdminString | not-accessible | The first index of h3cNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. |
| STR h3cNqaStatReactTestName | 1.3.6.1.4.1.2011.10.8.3.1.14.1.2 | SnmpAdminString | not-accessible | The second index of h3cNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. |
| U32 h3cNqaStatReactIndex | 1.3.6.1.4.1.2011.10.8.3.1.14.1.3 | Unsigned32 | not-accessible | The third index of h3cNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). |
| U32 h3cNqaStatReactItemIndex | 1.3.6.1.4.1.2011.10.8.3.1.14.1.4 | Unsigned32 | not-accessible | The forth index of h3cNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test |
| C32 h3cNqaStatReactCheckedNum | 1.3.6.1.4.1.2011.10.8.3.1.14.1.5 | Counter32 | read-only | The number of checked element samples that are monitored. |
| C32 h3cNqaStatReactThresholdNum | 1.3.6.1.4.1.2011.10.8.3.1.14.1.6 | Counter32 | read-only | The number of checked element samples that are over threshold. |
| h3cNqaImplementationTypeDomains | 1.3.6.1.4.1.2011.10.8.3.2 | |||
| h3cNqaUdpEcho | 1.3.6.1.4.1.2011.10.8.3.2.1 | Indicates that an implementation is using the UDP based echo server. Notes: The h3cNqaCtlTargetPort and h3cNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, h3cNqaCtlTargetPort must be set to the default value. | ||
| h3cNqaTcpconnect | 1.3.6.1.4.1.2011.10.8.3.2.2 | Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The h3cNqaCtlTargetPort and h3cNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, h3cNqaCtlTargetPort must be set to the default value. | ||
| h3cNqajitter | 1.3.6.1.4.1.2011.10.8.3.2.3 | Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis. | ||
| h3cNqaHttp | 1.3.6.1.4.1.2011.10.8.3.2.4 | Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL. | ||
| h3cNqadlsw | 1.3.6.1.4.1.2011.10.8.3.2.5 | Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer. | ||
| h3cNqadhcp | 1.3.6.1.4.1.2011.10.8.3.2.6 | Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation. | ||
| h3cNqaftp | 1.3.6.1.4.1.2011.10.8.3.2.7 | Indicates that an implementation is using tcp packet for ftp connect and data transfer. | ||
| h3cNqaNotifications | 1.3.6.1.4.1.2011.10.8.3.3 | |||
| NTF h3cNqaProbeTimeOverThreshold | 1.3.6.1.4.1.2011.10.8.3.3.1 | It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdConsecNum. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter. | ||
| NTF h3cNqaJitterRTTOverThreshold | 1.3.6.1.4.1.2011.10.8.3.3.2 | It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum in one test. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter. | ||
| NTF h3cNqaProbeFailure | 1.3.6.1.4.1.2011.10.8.3.3.3 | It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in h3cNqaReactThresholdAccumNum in one test while the value of h3cNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in h3cNqaReactThresholdConsecNum in one test while the value of h3cNqaReactThresholdType is 'consecutive'. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter. | ||
| NTF h3cNqaJitterPacketLoss | 1.3.6.1.4.1.2011.10.8.3.3.4 | It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in h3cNqaReactThresholdAccumNum in one test while the value of h3cNqaReactThresholdType is 'accumulative'. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter. | ||
| NTF h3cNqaJitterSDOverThreshold | 1.3.6.1.4.1.2011.10.8.3.3.5 | The SD means the jitter values from source to destination. It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter. | ||
| NTF h3cNqaJitterDSOverThreshold | 1.3.6.1.4.1.2011.10.8.3.3.6 | The DS means the jitter values from destination to source. It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter. | ||
| NTF h3cNqaICPIFOverThreshold | 1.3.6.1.4.1.2011.10.8.3.3.7 | It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. | ||
| NTF h3cNqaMOSOverThreshold | 1.3.6.1.4.1.2011.10.8.3.3.8 | It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. |
RFC description
Network Quality Assessment (NQA) MIB for Huawei-3COM devices with ICMP ping, jitter, and packet loss monitoring capabilities.
Start monitoring H3C router/switch (NQA active network quality testing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.