HH3C-DOT3-EFM-EPON-MIB

All MIBs › HH3C-DOT3-EFM-EPON-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2004-09-21

Category: Technology: EPON/PON, Technology: OAM, Vendor: H3C/HH3C

Description: Covers OLT and ONU port management for IEEE 802.3ah EFM EPON (Ethernet Passive Optical Network) on H3C access platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-DOT3-EFM-EPON-MIB?

HH3C-DOT3-EFM-EPON-MIB is an H3C enterprise MIB implementing the IEEE 802.3ah Ethernet in the First Mile (EFM) Multi-Point Control Protocol (MPCP) interfaces, the foundation of EPON (Ethernet Passive Optical Network) access technology used to deliver fiber-to-the-home/business services. Although drawn from the IEEE draft standard with H3C-prefixed object names, it is expected to expose per-ONU/OLT MPCP interface configuration and status objects such as registration state, discovery windows, and interface counters. Its intended monitoring role is hardware/link-status oriented: tracking whether ONUs are registered and active on the PON, and surfacing MPCP-layer errors, which are key indicators of optical access-network health. It explicitly derives from and maps to the IEEE 802.3ah standard (clauses 64/65), noted in the module description as its normative reference. Typical deployment is on H3C EPON OLT (optical line terminal) equipment in fiber access networks serving multiple ONUs. Engineers can download the HH3C-DOT3-EFM-EPON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-DOT3-EFM-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C EPON OLT (optical line terminal)
EPON ONU (optical network unit)

Monitoring Examples

No specific object names were provided for this MIB, so exact identifiers can't be cited here, but based on its IEEE 802.3ah EFM/MPCP scope, an operator would typically monitor per-ONU MPCP registration/discovery status and related interface error counters to detect an ONU that has dropped off the PON or is failing to register.

What Can Be Monitored

MPCP interface registration state
ONU discovery status
MPCP interface error counters

Imported Objects

From HH3C-OID-MIB

hh3cEpon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
mib-2

From SNMPv2-TC

MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cDot3MpcpMACCtrlFramesTransmitted OID:

Select an H3C EPON OLT/ONU (802.3ah EFM MPCP interface) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cDot3MpcpMACCtrlFramesTransmitted into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of MPCP frames passed to the MAC sublayer for transmission. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in frames), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cDot3EfmeponMIB	1.3.6.1.4.1.25506.2.42.2			The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Multi Point Control Protocol (MPCP) Interfaces as defined in IEEE Draft P802.3ah/D3.0 clause 64,65. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2MP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
hh3cDot3MpcpMIB	1.3.6.1.4.1.25506.2.42.2.1
hh3cDot3MpcpObjects	1.3.6.1.4.1.25506.2.42.2.1.1
hh3cDot3MpcpTable	1.3.6.1.4.1.25506.2.42.2.1.1.1		not-accessible	Table for dot3 Multi-Point Control Protocol (MPCP) MIB modules.
hh3cDot3MpcpEntry	1.3.6.1.4.1.25506.2.42.2.1.1.1.1		not-accessible	An entry in the dot3 MPCP MIB modules table.
I32 hh3cDot3MpcpID	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.1	Integer32	read-only	This variable is assigned so as to uniquely identify the Multi-Point MAC Control (MPCP) entity, as defined in [802.3ah] clause 64, among the subordinate managed objects of the containing object. This attribute is relevant for an OLT and an ONU.
T/F hh3cDot3MpcpOperStatus	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.2	TruthValue	read-only	This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When the attribute is True the the interface will act as if Multi-point control protocol is enabled. When the attribute is False the interface will act as if it does not have the Multi-point control protocol. The operational state can be changed using the hh3cDot3MpcpAdminState attribute. This attribute is relevant for an OLT and an ONU.
INT hh3cDot3MpcpMode	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.3	INTEGER	read-write	This variable can be used to identify the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting olt(1) for an OLT (server) mode and onu(2) for an ONU (client) mode. Writing can be done during only during initialization, when hh3cDot3MpcpOperStatus indicates Flase. This attribute is relevant for an OLT and an ONU.
I32 hh3cDot3MpcpLinkID	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.4	Integer32	read-only	A read-only value that identifies the Logical Link identity (LLID) associated with the MAC port as specified in [802.3ah] clause 65.1.3.2.2. This attribute is relevant for an OLT and an ONU.
MAC hh3cDot3MpcpRemoteMACAddress	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.5	MacAddress	read-only	A read-only value that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3) an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A. This attribute is relevant for an OLT and an ONU.
INT hh3cDot3MpcpRegistrationState	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.6	INTEGER	read-only	A read-only value that identifies the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. When this attribute has the enumeration unregistered(1) the interface may be used for registering a link partner. When this attribute has the enumeration registering(2) the interface is in the process of registering a link-partner. When this attribute has the enumeration registered(3) the interface has an established link-partner. This attribute is relevant for an OLT and an ONU. For the OLT it provides an indication per LLID.
I32 hh3cDot3MpcpTransmitElapsed	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.7	Integer32	read-only	A read-only value that reports the interval from last MPCP frame transmission in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP frame transmission in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
I32 hh3cDot3MpcpReceiveElapsed	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.8	Integer32	read-only	A read-only value that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP last MPCP frame reception in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
I32 hh3cDot3MpcpRoundTripTime	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.9	Integer32	read-only	A read-only value that reports the MPCP round trip time in increments of Time Quanta (TQ) 16ns. The value returned shall be (round trip time in ns)/16. If this value exceeds (2^16-1) the value (2^16-1) shall be returned. This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID
I32 hh3cDot3MpcpMaximumPendingGrants	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.10	Integer32	read-only	A read-only value that indicates the maximum number of grants an ONU can store. The maximum number of grants an ONU can store has a range of 0 to 255. This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID
T/F hh3cDot3MpcpAdminState	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.11	TruthValue	read-write	This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
I32 hh3cDot3MpcpOnTime	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.12	Integer32	read-only	A read-only value that reports the -on time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64. The value returned shall be (on time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
I32 hh3cDot3MpcpOffTime	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.13	Integer32	read-only	A read-only value that reports the -off time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64. The value returned shall be (off time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
I32 hh3cDot3MpcpSyncTime	1.3.6.1.4.1.25506.2.42.2.1.1.1.1.14	Integer32	read-only	A read-only value that reports the -sync lock time- for an OLT receiver in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64,65. The value returned shall be (sync lock time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
hh3cDot3MpcpStatTable	1.3.6.1.4.1.25506.2.42.2.1.1.2		not-accessible	This table defines the list of statistics counters of [802.3ah] clause 64 MPCP interface.
hh3cDot3MpcpStatEntry	1.3.6.1.4.1.25506.2.42.2.1.1.2.1		not-accessible	Table entries for table of statistics counters of [802.3ah] clause 64 MPCP interface.
C32 hh3cDot3MpcpMACCtrlFramesTransmittedEx	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.1	Counter32	read-only	A count of MPCP frames passed to the MAC sublayer for transmission. This counter is incremented when a MA_CONTROL.request service primitive is generated within the MAC control sublayer with an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU.
C32 hh3cDot3MpcpMACCtrlFramesReceived	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.2	Counter32	read-only	A count of MPCP frames passed by the MAC sublayer to the MAC Control sublayer. This counter is incremented when a ReceiveFrame function call returns a valid frame with: (1) a lengthOrType field value equal to the reserved Type for 802.3_MAC_Control as specified in 31.4.1.3, and (2) an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU.
C32 hh3cDot3MpcpDiscoveryWindowsSent	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.3	Counter32	read-only	A count of discovery windows generated. The counter is incremented by one for each generated discovery window. This attribute is relevant for an OLT and an ONU. At the ONU value should be zero.
C32 hh3cDot3MpcpDiscoveryTimeout	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.4	Counter32	read-only	A count of the number of times a discovery timeout occurs. Increment the counter by one for each discovery processing state-machine reset resulting from timeout waiting for message arrival. This attribute is relevant for an OLT and an ONU.
C32 hh3cDot3MpcpTxRegRequest	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.5	Counter32	read-only	A count of the number of times a REGISTER_REQ MPCP frames transmission occurs. Increment the counter by one for each REGISTER_REQ MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero.
C32 hh3cDot3MpcpRxRegRequest	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.6	Counter32	read-only	A count of the number of times a REGISTER_REQ MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_REQ MPCP frame received for each LLID as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero.
C32 hh3cDot3MpcpTxRegAck	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.7	Counter32	read-only	A count of the number of times a REGISTER_ACK MPCP frames transmission occurs. Increment the counter by one for each REGISTER_ACK MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT the value should be zero.
C32 hh3cDot3MpcpRxRegAck	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.8	Counter32	read-only	A count of the number of times a REGISTER_ACK MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_ACK MPCP frame received for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU the value should be zero.
C32 hh3cDot3MpcpTxReport	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.9	Counter32	read-only	A count of the number of times a REPORT MPCP frames transmission occurs. Increment the counter by one for each REPORT MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero.
C32 hh3cDot3MpcpRxReport	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.10	Counter32	read-only	A count of the number of times a REPORT MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REPORT MPCP frame received for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero.
C32 hh3cDot3MpcpTxGate	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.11	Counter32	read-only	A count of the number of times a GATE MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each GATE MPCP frame transmitted, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero.
C32 hh3cDot3MpcpRxGate	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.12	Counter32	read-only	A count of the number of times a GATE MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID ,at the OLT. Increment the counter by one for each GATE MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the OLT the value should be zero.
C32 hh3cDot3MpcpTxRegister	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.13	Counter32	read-only	A count of the number of times a REGISTER MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame transmitted, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero.
C32 hh3cDot3MpcpRxRegister	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.14	Counter32	read-only	A count of the number of times a REGISTER MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. at the OLT the value should be zero.
C32 hh3cDot3MpcpRxNotSupportedMPCP	1.3.6.1.4.1.25506.2.42.2.1.1.2.1.15	Counter32	read-only	A count of the number of times a non-supported MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each non-supported MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT.
hh3cDot3MpcpConformance	1.3.6.1.4.1.25506.2.42.2.1.2
hh3cDot3MpcpGroups	1.3.6.1.4.1.25506.2.42.2.1.2.1
hh3cDot3MpcpGroupBase	1.3.6.1.4.1.25506.2.42.2.1.2.1.1			A collection of objects of dot3 Mpcp Basic entity state definition.
hh3cDot3MpcpGroupParam	1.3.6.1.4.1.25506.2.42.2.1.2.1.2			A collection of objects of dot3 Mpcp for P2MP parameters.
hh3cDot3MpcpGroupStat	1.3.6.1.4.1.25506.2.42.2.1.2.1.3			A collection of objects of dot3 Mpcp Statistics
hh3cDot3MpcpCompliances	1.3.6.1.4.1.25506.2.42.2.1.2.2
hh3cDot3MpcpCompliance	1.3.6.1.4.1.25506.2.42.2.1.2.2.1			The compliance statement for Multi-point control protocol interfaces.
hh3cDot3OmpEmulationMIB	1.3.6.1.4.1.25506.2.42.2.2
hh3cDot3OmpEmulationObjects	1.3.6.1.4.1.25506.2.42.2.2.1
hh3cDot3OmpEmulationTable	1.3.6.1.4.1.25506.2.42.2.2.1.1		not-accessible	Table for dot3 OmpEmulation MIB modules.
hh3cDot3OmpEmulationEntry	1.3.6.1.4.1.25506.2.42.2.2.1.1.1		not-accessible	An entry in the dot3 OmpEmulation MIB modules table.
I32 hh3cDot3OmpEmulationID	1.3.6.1.4.1.25506.2.42.2.2.1.1.1.1	Integer32	read-only	The value of hh3cDot3OmpEmulationID is assigned so as to uniquely identify a OMPEmulation entity among the subordinate managed objects of the containing object. The value is mandated for an ONU.
INT hh3cDot3OmpEmulationType	1.3.6.1.4.1.25506.2.42.2.2.1.1.1.2	INTEGER	read-only	A read-only value that indicates that mode of operation of the Reconciliation Sublayer for Point to Point Emulation (see [802.3ah] clause 65.1). unknown(1) value is assigned in initializing, true state or type not yet known. olt(2) value is assigned when Sublayer operating in OLT mode. onu(3) value is assigned when Sublayer operating in ONU mode.
hh3cDot3OmpEmulationStatTable	1.3.6.1.4.1.25506.2.42.2.2.1.2		not-accessible	This table defines the list of statistics counters of [802.3ah] clause 65 OMP interface.
hh3cDot3OmpEmulationStatEntry	1.3.6.1.4.1.25506.2.42.2.2.1.2.1		not-accessible	Table entries for Table of statistics counters of [802.3ah] clause 65 OMP interface.
C32 hh3cDot3OmpEmulationSLDErrors	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.1	Counter32	read-only	A count of frames received that do not contain a valid SLD field as defined in [802.3ah] clause 65.1.3.3.1. This attribute is mandatory for an OLT and optional for an ONU.
C32 hh3cDot3OmpEmulationCRC8Errors	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.2	Counter32	read-only	A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, but do not pass the CRC-8 check as defined in [802.3ah] clause 65.1.3.3.3. This attribute is mandatory for an OLT and for an ONU.
C32 hh3cDot3OmpEmulationBadLLID	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.3	Counter32	read-only	A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, but are discarded due to the LLID check as defined in [802.3ah] clause 65.1.3.3.2. This attribute is relevant for an OLT and an ONU.
C32 hh3cDot3OmpEmulationGoodLLID	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.4	Counter32	read-only	A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3. This attribute is relevant for an OLT and an ONU.
C32 hh3cDot3OmpEmulationOnuPonCastLLID	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.5	Counter32	read-only	A count of frames received that contain a valid SLD field in an ONU, as defined in [802.3ah] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3ah] 65.1.3.3.2.
C32 hh3cDot3OmpEmulationOltPonCastLLID	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.6	Counter32	read-only	A count of frames received that contain a valid SLD field in an OLT, as defined in [802.3ah] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3ah] 65.1.3.3.2.
C32 hh3cDot3OmpEmulationBroadcastLLIDNotOnuID	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.7	Counter32	read-only	A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain broadcast LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an OLT and for an ONU.
C32 hh3cDot3OmpEmulationOnuLLIDNotBroadcast	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.8	Counter32	read-only	A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID).
C32 hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.9	Counter32	read-only	A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain the broadcast LLID plus ONU's LLID (frame reflected) as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID).
C32 hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId	1.3.6.1.4.1.25506.2.42.2.2.1.2.1.10	Counter32	read-only	A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and does not contain the ONU's LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU
hh3cDot3OmpeConformance	1.3.6.1.4.1.25506.2.42.2.2.2
hh3cDot3OmpeGroups	1.3.6.1.4.1.25506.2.42.2.2.2.1
hh3cDot3OmpeGroupID	1.3.6.1.4.1.25506.2.42.2.2.2.1.1			A collection of objects of dot3 OMP emulation ID entity state definition.
hh3cDot3OmpeGroupStat	1.3.6.1.4.1.25506.2.42.2.2.2.1.2			A collection of objects of dot3 OMP emulation Statistics
hh3cDot3OmpeCompliances	1.3.6.1.4.1.25506.2.42.2.2.2.2
hh3cDot3OmpeCompliance	1.3.6.1.4.1.25506.2.42.2.2.2.2.1			The compliance statement for OMPEmulation interfaces.
hh3cDot3EponMauMIB	1.3.6.1.4.1.25506.2.42.2.3
hh3cDot3EponMauObjects	1.3.6.1.4.1.25506.2.42.2.3.1
hh3cDot3EponMauTable	1.3.6.1.4.1.25506.2.42.2.3.1.1		not-accessible	Table for dot3 MAU EPON MIB modules.
hh3cDot3EponMauEntry	1.3.6.1.4.1.25506.2.42.2.3.1.1.1		not-accessible	An entry in the dot3 MAU EPON MIB modules table.
C32 hh3cDot3EponMauPCSCodingViolation	1.3.6.1.4.1.25506.2.42.2.3.1.1.1.1	Counter32	read-only	For 100 Mb/ s operation it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For 1000 Mb/ s operation it is a count of the number of times an invalid codegroup is received, other than the /V/ code-group.
INT hh3cDot3EponMauFecAbility	1.3.6.1.4.1.25506.2.42.2.3.1.1.1.2	INTEGER	read-only	A read-only value that indicates the support of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. nonsupported(2) value is assigned when Sublayer is not support. supported(3) value is assigned when Sublayer is supported.
INT hh3cDot3EponMauFecMode	1.3.6.1.4.1.25506.2.42.2.3.1.1.1.3	INTEGER	read-write	A read-write value that indicates the mode of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). A GET operation returns the current mode of operation the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. disabled(2) value is assigned when Sublayer operating in disabled mode. enabled(3) value is assigned when Sublayer operating in FEC mode. writing can be done all the time.
C32 hh3cDot3EponMauFECCorrectedBlocks	1.3.6.1.4.1.25506.2.42.2.3.1.1.1.4	Counter32	read-only	For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each received block that is corrected by the FEC function in the PHY.
C32 hh3cDot3EponMauFECUncorrectableBlocks	1.3.6.1.4.1.25506.2.42.2.3.1.1.1.5	Counter32	read-only	For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each FEC block that is determined to be uncorrectable by the FEC function in the PHY.
C32 hh3cDot3EponMauBufferHeadCodingViolation	1.3.6.1.4.1.25506.2.42.2.3.1.1.1.6	Counter32	read-only	For 1000 Mbps operation it is a counts of the number of invalid code-group received directly from the link.
hh3cDot3EponMauConformance	1.3.6.1.4.1.25506.2.42.2.3.2
hh3cDot3EponMauGroups	1.3.6.1.4.1.25506.2.42.2.3.2.1
hh3cDot3EponMauGroupAll	1.3.6.1.4.1.25506.2.42.2.3.2.1.1			A collection of objects of dot3 MAU definition.
hh3cDot3EponMauGroupFEC	1.3.6.1.4.1.25506.2.42.2.3.2.1.2			A collection of objects of FEC group definition.
hh3cDot3EponMauCompliances	1.3.6.1.4.1.25506.2.42.2.3.2.2
hh3cDot3EponMauCompliance	1.3.6.1.4.1.25506.2.42.2.3.2.2.1			The compliance statement for MAU EPON interfaces.
hh3cDot3EponMauType	1.3.6.1.4.1.25506.2.42.2.3.3
hh3cEponMauType1000BasePXOLT	1.3.6.1.4.1.25506.2.42.2.3.3.1			Multipoint MAC Control (per 802.3 section 64,65) OLT (master), unknown PMD
hh3cEponMauType1000BasePXONU	1.3.6.1.4.1.25506.2.42.2.3.3.2			Multipoint MAC Control (per 802.3 section 64,65),ONU (slave), unknown PMD
hh3cEponMauType1000BasePX10DOLT	1.3.6.1.4.1.25506.2.42.2.3.3.3			EPON over 10K link, downlink (per 802.3 section 60), OLT side
hh3cEponMauType1000BasePX10DONU	1.3.6.1.4.1.25506.2.42.2.3.3.4			EPON over 10K link, downlink (per 802.3 section 60), ONU side
hh3cEponMauType1000BasePX10UOLT	1.3.6.1.4.1.25506.2.42.2.3.3.5			EPON over 10K link, uplink (per 802.3 section 60), OLT side
hh3cEponMauType1000BasePX10UONU	1.3.6.1.4.1.25506.2.42.2.3.3.6			EPON over 10K link, uplink (per 802.3 section 60), ONU side
hh3cEponMauType1000BasePX20DOLT	1.3.6.1.4.1.25506.2.42.2.3.3.7			EPON over 20K link, downlink (per 802.3 section 60), OLT side
hh3cEponMauType1000BasePX20DONU	1.3.6.1.4.1.25506.2.42.2.3.3.8			EPON over 20K link, downlink (per 802.3 section 60), ONU side
hh3cEponMauType1000BasePX20UOLT	1.3.6.1.4.1.25506.2.42.2.3.3.9			EPON over 20K link, uplink (per 802.3 section 60), OLT side
hh3cEponMauType1000BasePX20UONU	1.3.6.1.4.1.25506.2.42.2.3.3.10			EPON over 20K link, uplink (per 802.3 section 60), ONU side

RFC description

Manages IEEE 802.3ah EFM EPON (Ethernet Passive Optical Network) OLT and ONU ports on H3C access platforms.

Start monitoring H3C EPON OLT/ONU (802.3ah EFM MPCP interface) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-DOT3-EFM-EPON-MIB