ME1200-EPS-MIB

All MIBs › ME1200-EPS-MIB

Organization: Cisco Systems, Inc

Last Updated: 2014-03-11

Category: Technology: OAM, Vendor: Cisco

Description: Cisco ME1200 Metro Ethernet switch MIB for Ethernet Protection Switching (EPS) configuration and monitoring per ITU-T G.8031.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-EPS-MIB?

ME1200-EPS-MIB is a Cisco private MIB for the ME1200 Metro Ethernet switch that implements Ethernet Protection Switching per ITU-T G.8031 linear APS. It exposes capability limits (maximum protection instances, MEPs, WTR and hold-off timer ranges) and per-instance configuration data such as protection domain, architecture (1+1 or 1:1), and which flow currently carries traffic. Its main monitoring value is fault and resiliency status: tracking whether a protection instance is running on its working or protection path reveals whether an underlying link has failed and switched over. It is built on the ITU-T G.8031 standard and works together with the related ME1200-MEP-MIB, which supplies the fault-detection triggers that drive protection switching. It is deployed in metro Ethernet ring or linear-protection topologies requiring fast, sub-50ms failover for carrier services. Network engineers evaluating or troubleshooting this functionality can download the ME1200-EPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-EPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet switch

Monitoring Examples

Querying me1200InstanceTable entries by me1200InstanceId reveals each EPS protection instance's me1200InstanceDomain and me1200InstanceArchitecture. Cross-referencing me1200InstanceWorkingFlow shows which flow, working or protection, currently carries traffic; an unexpected switch to the protection flow indicates a working-path fault. me1200EpsCapabilitiesWtrMax and HoldOffMax bound the configurable timer ranges an operator can set.

What Can Be Monitored

active working/protection flow per instance
EPS instance domain and architecture
protection switching capability limits
hold-off and WTR timer settings

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200InterfaceIndex
ME1200RowEditorState

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200EpsMib	1.3.6.1.4.1.9.9.815.1.45			This is a private Linear EPS (G.8031) MIB
me1200EpsMibObjects	1.3.6.1.4.1.9.9.815.1.45.1
me1200EpsCapabilities	1.3.6.1.4.1.9.9.815.1.45.1.1
U32 me1200EpsCapabilitiesInstanceMax	1.3.6.1.4.1.9.9.815.1.45.1.1.1	Unsigned32	read-only	Maximum number of created EPS instances
U32 me1200EpsCapabilitiesWtrMax	1.3.6.1.4.1.9.9.815.1.45.1.1.2	Unsigned32	read-only	Maximum WTR timer value
U32 me1200EpsCapabilitiesHoldOffOff	1.3.6.1.4.1.9.9.815.1.45.1.1.3	Unsigned32	read-only	Hold Off timer OFF value
U32 me1200EpsCapabilitiesHoldOffMax	1.3.6.1.4.1.9.9.815.1.45.1.1.4	Unsigned32	read-only	Maximum Hold Off timer value
U32 me1200EpsCapabilitiesMepMax	1.3.6.1.4.1.9.9.815.1.45.1.1.5	Unsigned32	read-only	Maximum MEP relation instance value
U32 me1200EpsCapabilitiesMepInvalid	1.3.6.1.4.1.9.9.815.1.45.1.1.6	Unsigned32	read-only	Invalid MEP indication. This is returned when EPS has no MEP relations
me1200EpsConfig	1.3.6.1.4.1.9.9.815.1.45.1.2
me1200InstanceTable	1.3.6.1.4.1.9.9.815.1.45.1.2.1		not-accessible	This is a table of created EPS instance parameters.
me1200InstanceEntry	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1		not-accessible	This is a created EPS instance parameters. No parameters can be changed after create.
I32 me1200InstanceId	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1.1	Integer32	not-accessible	The EPS instance ID
ME1 me1200InstanceDomain	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1.2	ME1200EpsDomain	read-write	The protection domain. Cannot be changed after creation.
ME1 me1200InstanceArchitecture	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1.3	ME1200EpsArchitecture	read-write	The protection architecture. Cannot be changed after creation.
NUM me1200InstanceWorkingFlow	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1.4	ME1200InterfaceIndex	read-write	The working flow. Cannot be changed after creation.
NUM me1200InstanceProtectingFlow	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1.5	ME1200InterfaceIndex	read-write	The protecting flow. Cannot be changed after creation.
ME1 me1200InstanceAction	1.3.6.1.4.1.9.9.815.1.45.1.2.1.1.100	ME1200RowEditorState	read-write	Action
me1200InstanceRowEditor	1.3.6.1.4.1.9.9.815.1.45.1.2.2
I32 me1200InstanceRowEditorId	1.3.6.1.4.1.9.9.815.1.45.1.2.2.1	Integer32	read-write	The EPS instance ID
ME1 me1200InstanceRowEditorDomain	1.3.6.1.4.1.9.9.815.1.45.1.2.2.2	ME1200EpsDomain	read-write	The protection domain. Cannot be changed after creation.
ME1 me1200InstanceRowEditorArchitecture	1.3.6.1.4.1.9.9.815.1.45.1.2.2.3	ME1200EpsArchitecture	read-write	The protection architecture. Cannot be changed after creation.
NUM me1200InstanceRowEditorWorkingFlow	1.3.6.1.4.1.9.9.815.1.45.1.2.2.4	ME1200InterfaceIndex	read-write	The working flow. Cannot be changed after creation.
NUM me1200InstanceRowEditorProtectingFlow	1.3.6.1.4.1.9.9.815.1.45.1.2.2.5	ME1200InterfaceIndex	read-write	The protecting flow. Cannot be changed after creation.
ME1 me1200InstanceRowEditorAction	1.3.6.1.4.1.9.9.815.1.45.1.2.2.100	ME1200RowEditorState	read-write	Action
me1200ConfigTable	1.3.6.1.4.1.9.9.815.1.45.1.2.3		not-accessible	This is a table of created EPS instance configuration parameters. When an EPS instance is created in the 'InstanceTable', an entry is automatically created here with default value.
me1200ConfigEntry	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1		not-accessible	This is a created EPS instance configuration parameters
I32 me1200ConfigId	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1.1	Integer32	not-accessible	The EPS instance ID
ME1 me1200ConfigDirectional	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1.2	ME1200EpsDirectional	read-write	Protection is uni or bi directional. Only for 1+1.
T/F me1200ConfigApsEnable	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1.3	TruthValue	read-write	APS can be enabled or disabled. Only for 1+1.
T/F me1200ConfigRevertive	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1.4	TruthValue	read-write	Revertive operation can enabled or disabled.
U32 me1200ConfigRestoreTimer	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1.5	Unsigned32	read-write	Wait to restore timer in seconds - max. 720 - min. 1.
U32 me1200ConfigHoldOffTimer	1.3.6.1.4.1.9.9.815.1.45.1.2.3.1.6	Unsigned32	read-write	Hold off timer in 100 ms - max. 100 - 0 means no hold off
me1200MepTable	1.3.6.1.4.1.9.9.815.1.45.1.2.4		not-accessible	This is a table of created EPS instance MEP configuration parameters. When an EPS instance is created in the 'InstanceTable', an entry is automatically created here with default value 100 - meaning no MEP instance related.
me1200MepEntry	1.3.6.1.4.1.9.9.815.1.45.1.2.4.1		not-accessible	This is a created EPS instance MEP configuration parameters.
I32 me1200MepId	1.3.6.1.4.1.9.9.815.1.45.1.2.4.1.1	Integer32	not-accessible	The EPS instance ID
U32 me1200MepWorkingMep	1.3.6.1.4.1.9.9.815.1.45.1.2.4.1.2	Unsigned32	read-write	Working SF MEP reference - max. 100-1 - min. 0. During get 100 indicate no reference
U32 me1200MepProtectingMep	1.3.6.1.4.1.9.9.815.1.45.1.2.4.1.3	Unsigned32	read-write	Protecting SF MEP reference - max. 100-1 - min. 0. During get 100 indicate no reference
U32 me1200MepApsMep	1.3.6.1.4.1.9.9.815.1.45.1.2.4.1.4	Unsigned32	read-write	APS MEP reference - max. 100-1 - min. 0. During get 100 indicate no reference
me1200CommandTable	1.3.6.1.4.1.9.9.815.1.45.1.2.5		not-accessible	This is a table of created EPS instance command. When an EPS instance is created in the 'InstanceTable', an entry is automatically created here with 'no command'.
me1200CommandEntry	1.3.6.1.4.1.9.9.815.1.45.1.2.5.1		not-accessible	This is a created EPS instance command
I32 me1200CommandId	1.3.6.1.4.1.9.9.815.1.45.1.2.5.1.1	Integer32	not-accessible	The EPS instance ID
ME1 me1200CommandCommand	1.3.6.1.4.1.9.9.815.1.45.1.2.5.1.2	ME1200EpsCommand	read-write	protection group command
me1200EpsStatus	1.3.6.1.4.1.9.9.815.1.45.1.3
me1200StatusTable	1.3.6.1.4.1.9.9.815.1.45.1.3.1		not-accessible	This is a table of created EPS instance status.
me1200StatusEntry	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1		not-accessible	This is a created EPS instance status.
I32 me1200StatusId	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.1	Integer32	not-accessible	The EPS instance ID
ME1 me1200StatusProtectionState	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.2	ME1200EpsProtectionState	read-only	Protection state according to to G.8031 Annex A
ME1 me1200StatusWorkingState	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.3	ME1200EpsDefectState	read-only	Working flow defect state
ME1 me1200StatusProtectingState	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.4	ME1200EpsDefectState	read-only	Protecting flow defect state
ME1 me1200StatusTransmittedApsRequest	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.5	ME1200EpsRequest	read-only	Transmitted APS request
U32 me1200StatusTransmittedApsReSignal	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.6	Unsigned32	read-only	Transmitted APS requested signal
U32 me1200StatusTransmittedApsBrSignal	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.7	Unsigned32	read-only	Transmitted APS bridged signal
ME1 me1200StatusReceivedApsRequest	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.8	ME1200EpsRequest	read-only	Received APS request
U32 me1200StatusReceivedApsReSignal	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.9	Unsigned32	read-only	Received APS requested signal
U32 me1200StatusReceivedApsBrSignal	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.10	Unsigned32	read-only	Received APS bridged signal
T/F me1200StatusDfopPm	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.11	TruthValue	read-only	FOP Protection type Mismatch - unexpected B bit
T/F me1200StatusDfopCm	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.12	TruthValue	read-only	FOP Configuration Mismatch - APS received on working
T/F me1200StatusDfopNr	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.13	TruthValue	read-only	FOP Not expected Request - receiving request is not the expected (transmitted)
T/F me1200StatusDfopNoAps	1.3.6.1.4.1.9.9.815.1.45.1.3.1.1.14	TruthValue	read-only	FOP No APS received
me1200EpsControl	1.3.6.1.4.1.9.9.815.1.45.1.4
me1200EpsMibConformance	1.3.6.1.4.1.9.9.815.1.45.3
me1200EpsMibCompliances	1.3.6.1.4.1.9.9.815.1.45.3.1
me1200EpsMibCompliance	1.3.6.1.4.1.9.9.815.1.45.3.1.1			The compliance statement for the implementation.
me1200EpsMibGroups	1.3.6.1.4.1.9.9.815.1.45.3.2
me1200EpsCapabilitiesInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.1			A collection of objects suitable for bulk operations.
me1200InstanceTableInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.2			A collection of objects suitable for bulk operations.
me1200InstanceRowEditorInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.3			A collection of objects suitable for bulk operations.
me1200ConfigTableInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.4			A collection of objects suitable for bulk operations.
me1200MepTableInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.5			A collection of objects suitable for bulk operations.
me1200CommandTableInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.6			A collection of objects suitable for bulk operations.
me1200StatusTableInfoGroup	1.3.6.1.4.1.9.9.815.1.45.3.2.7			A collection of objects suitable for bulk operations.

RFC description

Cisco ME1200 linear EPS protection switching MIB for G.8031 equipment protection architecture and defect management.

Start monitoring Cisco ME1200 Metro Ethernet switch (G.8031 linear protection switching) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-EPS-MIB

What Is ME1200-EPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description