ME1200-PERF-MONITOR-MIB

All MIBs › ME1200-PERF-MONITOR-MIB

Organization: Cisco Systems, Inc

Last Updated: 2016-08-25

Category: Quality of Service, Technology: OAM, Technology: Traffic Monitoring, Vendor: Cisco

Description: Cisco ME1200 Metro Ethernet switch MIB for performance monitoring of Ethernet service statistics including throughput and error counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-PERF-MONITOR-MIB?

ME1200-PERF-MONITOR-MIB is a Cisco vendor-specific MIB for the ME 1200 Metro Ethernet Access Device family that models the switch's built-in Performance Monitoring (PM) subsystem, covering Ethernet Loss Measurement (LM), Delay Measurement (DM), and EVC (Ethernet Virtual Connection) statistics as defined by ITU-T Y.1731/MEF service OAM. It exposes configuration objects for enabling and tuning PM collection (me1200PerfMonitorConfigGlobalsMgmtLmAdminState, DmAdminState, EvcAdminState and their associated interval and storage-state controls), scheduled-transfer settings (me1200PerfMonitorConfigGlobalsXferSchedHourTable/QuarterTable), and status tables reporting actual measurements — me1200PerfMonitorStatusStatisticsLmTable and DmTable (per-MEP frame-loss and delay counts, near/far-end loss rates), the DmBinTable (delay histogram buckets), and the EvcTable (per-EVC, per-port traffic counters). It depends on the underlying CFM/MEP (Maintenance Entity Point) configuration on the switch to identify which service endpoints are being measured. Deployed on Cisco ME1200 metro Ethernet switches, it lets service providers verify SLA compliance for Carrier Ethernet services, and network engineers can download the ME1200-PERF-MONITOR-MIB file to load its PM tables into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-PERF-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME 1200 Metro Ethernet Access Device

Monitoring Examples

An operator polls me1200PerfMonitorStatusStatisticsDmTable for a given MEP instance to check me1200PerfMonitorStatusStatisticsDmMepFar/NearEndLoss-equivalent delay figures against the SLA target; a sustained rise in near-end or far-end loss rate in the paired LmTable, combined with an EvcTable counter showing dropped frames on that EVC, would indicate a degrading Carrier Ethernet service between the two MEPs.

What Can Be Monitored

loss measurement (LM) per-MEP frame counters
delay measurement (DM) per-MEP latency stats
DM delay histogram buckets
per-EVC traffic statistics
PM collection admin/storage state
scheduled statistics-transfer configuration

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString
ME1200InterfaceIndex
ME1200MepDmTimeUnit
ME1200MepInstanceDirection
ME1200MepTxRate
ME1200Unsigned16
ME1200Unsigned8

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using me1200PerfMonitorStatusStatisticsEvcGreenRxFrames OID:

Select a Cisco ME1200 Metro Ethernet Access Device (Y.1731 performance monitoring) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type me1200PerfMonitorStatusStatisticsEvcGreenRxFrames into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of green frames received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200PerfMonitorMib	1.3.6.1.4.1.9.9.815.1.117			This is a private version of the Performance Monitor MIB.
me1200PerfMonitorMibObjects	1.3.6.1.4.1.9.9.815.1.117.1
me1200PerfMonitorConfig	1.3.6.1.4.1.9.9.815.1.117.1.2
me1200PerfMonitorConfigGlobals	1.3.6.1.4.1.9.9.815.1.117.1.2.1
me1200PerfMonitorConfigGlobalsMgmt	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1
T/F me1200PerfMonitorConfigGlobalsMgmtLmAdminState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.1	TruthValue	read-write	Administrative control for PM's LM function, TRUE is to enable monitoring LM and FALSE is to disable it.
T/F me1200PerfMonitorConfigGlobalsMgmtLmStorageState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.2	TruthValue	read-write	Administrative control for storing PM's LM result, TRUE is to enable storing LM statistics and FALSE is to disable it.
ME1 me1200PerfMonitorConfigGlobalsMgmtLmInterval	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.3	ME1200Unsigned8	read-write	Interval for tracking LM, in minute. The configurable value ranges from 1 to 60.
T/F me1200PerfMonitorConfigGlobalsMgmtDmAdminState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.4	TruthValue	read-write	Administrative control for PM's DM function, TRUE is to enable monitoring DM and FALSE is to disable it.
T/F me1200PerfMonitorConfigGlobalsMgmtDmStorageState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.5	TruthValue	read-write	Administrative control for storing PM's DM result, TRUE is to enable storing DM statistics and FALSE is to disable it.
ME1 me1200PerfMonitorConfigGlobalsMgmtDmInterval	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.6	ME1200Unsigned8	read-write	Interval for tracking DM, in minute. The configurable value ranges from 1 to 60.
T/F me1200PerfMonitorConfigGlobalsMgmtDmBinStorageState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.7	TruthValue	read-write	Administrative control for storing PM's DM bucket result, TRUE is to enable storing DM bucket statistics and FALSE is to disable it.
T/F me1200PerfMonitorConfigGlobalsMgmtEvcAdminState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.8	TruthValue	read-write	Administrative control for PM's EVC monitoring function, TRUE is to enable monitoring EVC and FALSE is to disable it.
T/F me1200PerfMonitorConfigGlobalsMgmtEvcStorageState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.9	TruthValue	read-write	Administrative control for storing PM's EVC monitoring result, TRUE is to enable storing EVC statistics and FALSE is to disable it.
ME1 me1200PerfMonitorConfigGlobalsMgmtEvcMeasureInterval	1.3.6.1.4.1.9.9.815.1.117.1.2.1.1.10	ME1200Unsigned8	read-write	Interval for tracking EVC, in minute. The configurable value ranges from 1 to 60.
me1200PerfMonitorConfigGlobalsTransfer	1.3.6.1.4.1.9.9.815.1.117.1.2.1.2
T/F me1200PerfMonitorConfigGlobalsTransferAdminState	1.3.6.1.4.1.9.9.815.1.117.1.2.1.2.1	TruthValue	read-write	Administrative control for PM's transfer function, TRUE is to enable sending PM's monitoring result and FALSE is to disable it.
STR me1200PerfMonitorConfigGlobalsTransferServerUrl	1.3.6.1.4.1.9.9.815.1.117.1.2.1.2.2	ME1200DisplayString	read-write	The URL for the server directory that keeps PM's monitoring result.
ME1 me1200PerfMonitorConfigGlobalsTransferIntervalMode	1.3.6.1.4.1.9.9.815.1.117.1.2.1.2.3	ME1200PerfMonitorTransferMode	read-write	Transfer mode, based on selected interval type, for sending PM results. When 'all' is set, PM result from all available intervals will be sent. When 'new' is set, PM result from new intervals since last transfer will be sent. When 'fixAmount' is set, PM result from a fixed number of intervals will be sent.
ME1 me1200PerfMonitorConfigGlobalsTransferFixedNumberOfInterval	1.3.6.1.4.1.9.9.815.1.117.1.2.1.2.4	ME1200Unsigned8	read-write	PM result from this fixed number of intervals will be sent. It is working only when 'IntervalMode' is 'fixAmount'. The configurable value ranges from 1 to 96.
T/F me1200PerfMonitorConfigGlobalsTransferRetryIncompletedTransfer	1.3.6.1.4.1.9.9.815.1.117.1.2.1.2.5	TruthValue	read-write	Administrative control to retry sending PM result from last incompleted transmission, TRUE is to enable retrying the incompleted PM result transfer and FALSE is to disable it.
me1200PerfMonitorConfigGlobalsXferSched	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3
me1200PerfMonitorConfigGlobalsXferSchedHourTable	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.1		not-accessible	This is a table for managing PM hourly scheduled transfer configuration.
me1200PerfMonitorConfigGlobalsXferSchedHourEntry	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.1.1		not-accessible	Each entry has a set of parameters.
U32 me1200PerfMonitorConfigGlobalsXferSchedHourIndex	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.1.1.1	Unsigned32	not-accessible	Hour value in 24 hour time.
T/F me1200PerfMonitorConfigGlobalsXferSchedHourEnabled	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.1.1.2	TruthValue	read-write	Administrative control for managing the transfer schedule, TRUE is to enable specific time for transfer schedule and FALSE is to disable it.
me1200PerfMonitorConfigGlobalsXferSchedQuarterTable	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.2		not-accessible	This is a table for managing PM quarterly scheduled transfer configuration.
me1200PerfMonitorConfigGlobalsXferSchedQuarterEntry	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.2.1		not-accessible	Each entry has a set of parameters.
U32 me1200PerfMonitorConfigGlobalsXferSchedQuarterIndex	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.2.1.1	Unsigned32	not-accessible	Quarter value in a hour.
T/F me1200PerfMonitorConfigGlobalsXferSchedQuarterEnabled	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.2.1.2	TruthValue	read-write	Administrative control for managing the transfer schedule, TRUE is to enable specific time for transfer schedule and FALSE is to disable it.
me1200PerfMonitorConfigGlobalsXferSchedOffset	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.3
ME1 me1200PerfMonitorConfigGlobalsXferSchedOffsetMinute	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.3.1	ME1200Unsigned8	read-write	The scheduled transfer time offset by minutes. The configurable value ranges from 0 to 15.
ME1 me1200PerfMonitorConfigGlobalsXferSchedOffsetRandomSecond	1.3.6.1.4.1.9.9.815.1.117.1.2.1.3.3.2	ME1200Unsigned16	read-write	The scheduled transfer time random offset by seconds. It provides a range for choosing a random second offset. The configurable value ranges from 0 to 900.
me1200PerfMonitorStatus	1.3.6.1.4.1.9.9.815.1.117.1.3
me1200PerfMonitorStatusStatistics	1.3.6.1.4.1.9.9.815.1.117.1.3.1
me1200PerfMonitorStatusStatisticsLmTable	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1		not-accessible	This is a table for displaying PM loss measurement statistics.
me1200PerfMonitorStatusStatisticsLmEntry	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1		not-accessible	Each entry has a set of LM statistics.
U32 me1200PerfMonitorStatusStatisticsLmIntervalId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.1	Unsigned32	not-accessible	The measurement interval identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsLmEntryId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.2	Unsigned32	not-accessible	The entry identifier for the performance monitor data sets.
ME1 me1200PerfMonitorStatusStatisticsLmMepInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.3	ME1200Unsigned16	read-only	The MEP instance for the performance monitor data sets.
NUM me1200PerfMonitorStatusStatisticsLmResidencePort	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.4	ME1200InterfaceIndex	read-only	The residence port for the MEP.
ME1 me1200PerfMonitorStatusStatisticsLmMepId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.5	ME1200Unsigned16	read-only	Two bytes CCM MEP ID in the transmitted CCM.
MAC me1200PerfMonitorStatusStatisticsLmMepMacAddress	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.6	MacAddress	read-only	MAC address of this MEP which can be used by other MEP when unicast is selected.
ME1 me1200PerfMonitorStatusStatisticsLmMepPeerMepId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.7	ME1200Unsigned16	read-only	An expected MEP identifier in the received CCM.
MAC me1200PerfMonitorStatusStatisticsLmMepPeerMacAddress	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.8	MacAddress	read-only	MAC address to be used when unicast is selected with the peer MEP. Also, this MAC is used to create HW checking of receiving CCM PDU from this MEP.
ME1 me1200PerfMonitorStatusStatisticsLmMepDirection	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.10	ME1200MepInstanceDirection	read-only	Upstream or downstream that needs to be monitored.
ME1 me1200PerfMonitorStatusStatisticsLmMepLevel	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.11	ME1200Unsigned8	read-only	The MEG level of this MEP.
U32 me1200PerfMonitorStatusStatisticsLmMepFlowInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.12	Unsigned32	read-only	The MEP is related to this flow depends on 'MepDomain'.
ME1 me1200PerfMonitorStatusStatisticsLmMepTaggedVid	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.13	ME1200Unsigned16	read-only	An outer C/S-tag or the subscriber VID that identifies the subscriber flow in EVC where the MIP is active.
U32 me1200PerfMonitorStatusStatisticsLmPriority	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.14	Unsigned32	read-only	The priority to be inserted as PCP bits in TAG (if any).
ME1 me1200PerfMonitorStatusStatisticsLmRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.15	ME1200MepTxRate	read-only	Frame rate of CCM/LMM PDU which is the inverse of transmission period as described in Y.1731.
U32 me1200PerfMonitorStatusStatisticsLmTx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.16	Unsigned32	read-only	The number of frame transmitted.
U32 me1200PerfMonitorStatusStatisticsLmRx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.17	Unsigned32	read-only	The number of frame received.
U32 me1200PerfMonitorStatusStatisticsLmNearEndLossCount	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.18	Unsigned32	read-only	The near end loss count.
U32 me1200PerfMonitorStatusStatisticsLmNearEndLossRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.19	Unsigned32	read-only	The near end loss ratio.
U32 me1200PerfMonitorStatusStatisticsLmFarEndLossCount	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.20	Unsigned32	read-only	The far end loss count.
U32 me1200PerfMonitorStatusStatisticsLmFarEndLossRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.21	Unsigned32	read-only	The far end loss ratio.
STR me1200PerfMonitorStatusStatisticsLmMepFlowName	1.3.6.1.4.1.9.9.815.1.117.1.3.1.1.1.22	ME1200DisplayString	read-only	The name of the MEP flow instance.
me1200PerfMonitorStatusStatisticsDmTable	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2		not-accessible	This is a table for displaying PM delay measurement statistics.
me1200PerfMonitorStatusStatisticsDmEntry	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1		not-accessible	Each entry has a set of DM statistics.
U32 me1200PerfMonitorStatusStatisticsDmIntervalId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.1	Unsigned32	not-accessible	The measurement interval identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsDmEntryId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.2	Unsigned32	not-accessible	The entry identifier for the performance monitor data sets.
ME1 me1200PerfMonitorStatusStatisticsDmMepInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.3	ME1200Unsigned16	read-only	The MEP instance for the performance monitor data sets.
NUM me1200PerfMonitorStatusStatisticsDmResidencePort	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.4	ME1200InterfaceIndex	read-only	The residence port for the MEP.
ME1 me1200PerfMonitorStatusStatisticsDmMepId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.5	ME1200Unsigned16	read-only	Two bytes CCM MEP ID in the transmitted CCM.
MAC me1200PerfMonitorStatusStatisticsDmMepMacAddress	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.6	MacAddress	read-only	MAC address of this MEP which can be used by other MEP when unicast is selected.
ME1 me1200PerfMonitorStatusStatisticsDmMepPeerMepId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.7	ME1200Unsigned16	read-only	An expected MEP identifier in the received CCM.
MAC me1200PerfMonitorStatusStatisticsDmMepPeerMacAddress	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.8	MacAddress	read-only	MAC address to be used when unicast is selected with the peer MEP. Also, this MAC is used to create HW checking of receiving CCM PDU from this MEP.
ME1 me1200PerfMonitorStatusStatisticsDmMepDirection	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.10	ME1200MepInstanceDirection	read-only	Upstream or downstream that needs to be monitored.
ME1 me1200PerfMonitorStatusStatisticsDmMepLevel	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.11	ME1200Unsigned8	read-only	The MEG level of this MEP.
U32 me1200PerfMonitorStatusStatisticsDmMepFlowInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.12	Unsigned32	read-only	The MEP is related to this flow depends on 'MepDomain'.
ME1 me1200PerfMonitorStatusStatisticsDmMepTaggedVid	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.13	ME1200Unsigned16	read-only	An outer C/S-tag or the subscriber VID that identifies the subscriber flow in EVC where the MIP is active.
U32 me1200PerfMonitorStatusStatisticsDmPriority	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.14	Unsigned32	read-only	The priority to be inserted as PCP bits in TAG (if any).
ME1 me1200PerfMonitorStatusStatisticsDmRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.15	ME1200Unsigned8	read-only	The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535.
ME1 me1200PerfMonitorStatusStatisticsDmUnit	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.16	ME1200MepDmTimeUnit	read-only	The time resolution.
U32 me1200PerfMonitorStatusStatisticsDmTx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.17	Unsigned32	read-only	The number of frame transmitted.
U32 me1200PerfMonitorStatusStatisticsDmRx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.18	Unsigned32	read-only	The number of frame received.
U32 me1200PerfMonitorStatusStatisticsDmFarNearDelayAverage	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.19	Unsigned32	read-only	The far to near average delay.
U32 me1200PerfMonitorStatusStatisticsDmFarNearDelayAverageVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.20	Unsigned32	read-only	The far to near average delay variation.
U32 me1200PerfMonitorStatusStatisticsDmFarNearDelayMin	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.21	Unsigned32	read-only	The minimum far to near delay.
U32 me1200PerfMonitorStatusStatisticsDmFarNearDelayMax	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.22	Unsigned32	read-only	The maximum far to near delay.
U32 me1200PerfMonitorStatusStatisticsDmFarNearDelayMinVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.23	Unsigned32	read-only	The far to near minimum delay variation measured.
U32 me1200PerfMonitorStatusStatisticsDmFarNearDelayMaxVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.24	Unsigned32	read-only	The far to near maximum delay variation measured.
U32 me1200PerfMonitorStatusStatisticsDmNearFarDelayAverage	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.25	Unsigned32	read-only	The near to far average delay.
U32 me1200PerfMonitorStatusStatisticsDmNearFarDelayAverageVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.26	Unsigned32	read-only	The near to far average delay variation.
U32 me1200PerfMonitorStatusStatisticsDmNearFarDelayMin	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.27	Unsigned32	read-only	The minimum near to far delay.
U32 me1200PerfMonitorStatusStatisticsDmNearFarDelayMax	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.28	Unsigned32	read-only	The maximum near to far delay.
U32 me1200PerfMonitorStatusStatisticsDmNearFarDelayMinVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.29	Unsigned32	read-only	The near to far minimum delay variation measured.
U32 me1200PerfMonitorStatusStatisticsDmNearFarDelayMaxVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.30	Unsigned32	read-only	The near to far maximum delay variation measured.
U32 me1200PerfMonitorStatusStatisticsDm2WayDelayAverage	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.31	Unsigned32	read-only	The two-way average delay.
U32 me1200PerfMonitorStatusStatisticsDm2WayDelayAverageVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.32	Unsigned32	read-only	The two-way average delay variation.
U32 me1200PerfMonitorStatusStatisticsDm2WayDelayMin	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.33	Unsigned32	read-only	The minimum two-way delay.
U32 me1200PerfMonitorStatusStatisticsDm2WayDelayMinVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.34	Unsigned32	read-only	The 2-Way minimum delay variation measured.
U32 me1200PerfMonitorStatusStatisticsDm2WayDelayMax	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.35	Unsigned32	read-only	The maximum two-way delay.
U32 me1200PerfMonitorStatusStatisticsDm2WayDelayMaxVariation	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.36	Unsigned32	read-only	The 2-Way maximum delay variation measured.
STR me1200PerfMonitorStatusStatisticsDmMepFlowName	1.3.6.1.4.1.9.9.815.1.117.1.3.1.2.1.37	ME1200DisplayString	read-only	The name of the MEP flow instance.
me1200PerfMonitorStatusStatisticsDmBinTable	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3		not-accessible	This is a table for displaying PM bin delay measurement statistics.
me1200PerfMonitorStatusStatisticsDmBinEntry	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1		not-accessible	Each entry has a set of DM bin statistics.
U32 me1200PerfMonitorStatusStatisticsDmBinIntervalId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1.1	Unsigned32	not-accessible	The measurement interval identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsDmBinEntryId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1.2	Unsigned32	not-accessible	The entry identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsDmBinType	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1.3	Unsigned32	not-accessible	The type for DM bin statistics. It's used for indicating what kinds of delay frame are counted in the bin.'1' presents the frame delay. '2' presents the inter frame delay variation.
U32 me1200PerfMonitorStatusStatisticsDmBinDirection	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1.4	Unsigned32	not-accessible	The direction for DM bin statistics. It's used for indicating the measuring method of the delay frame. '1' presents one-way delay from remote devices to the local devices. '2' presents one-way delay from local devices to the remote devices. '3' presents 2-way delay from near to far then far to near.
U32 me1200PerfMonitorStatusStatisticsDmBinBucketId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1.5	Unsigned32	not-accessible	The bin ID.
U32 me1200PerfMonitorStatusStatisticsDmBinHitCount	1.3.6.1.4.1.9.9.815.1.117.1.3.1.3.1.6	Unsigned32	read-only	The hit count for the DM bin
me1200PerfMonitorStatusStatisticsEvcTable	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4		not-accessible	This is a table for displaying PM EVC statistics.
me1200PerfMonitorStatusStatisticsEvcEntry	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1		not-accessible	Each entry has a set of EVC statistics.
U32 me1200PerfMonitorStatusStatisticsEvcIntervalId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.1	Unsigned32	not-accessible	The measurement interval identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsEvcEntryId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.2	Unsigned32	not-accessible	The entry identifier for the performance monitor data sets.
ME1 me1200PerfMonitorStatusStatisticsEvcEvcInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.3	ME1200Unsigned16	read-only	The EVC instance for the performance monitor data sets.
ME1 me1200PerfMonitorStatusStatisticsEvcPortType	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.4	ME1200PerfMonitorEvcPortType	read-only	The port type for the EVC.
NUM me1200PerfMonitorStatusStatisticsEvcPort	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.5	ME1200InterfaceIndex	read-only	The interface ID for the EVC.
U32 me1200PerfMonitorStatusStatisticsEvcCos	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.6	Unsigned32	read-only	The COS queue ID on the interface, '4294967295' indicates the port is NNI port.
C64 me1200PerfMonitorStatusStatisticsEvcGreenRxFramesEx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.7	Counter64	read-only	The number of green frames received.
C64 me1200PerfMonitorStatusStatisticsEvcGreenTxFrames	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.8	Counter64	read-only	The number of green frames transmitted.
C64 me1200PerfMonitorStatusStatisticsEvcGreenRxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.9	Counter64	read-only	The number of green bytes received.
C64 me1200PerfMonitorStatusStatisticsEvcGreenTxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.10	Counter64	read-only	The number of green bytes transmitted.
C64 me1200PerfMonitorStatusStatisticsEvcYellowRxFrames	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.11	Counter64	read-only	The number of yellow frames received.
C64 me1200PerfMonitorStatusStatisticsEvcYellowTxFrames	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.12	Counter64	read-only	The number of yellow frames transmitted.
C64 me1200PerfMonitorStatusStatisticsEvcYellowRxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.13	Counter64	read-only	The number of yellow bytes received.
C64 me1200PerfMonitorStatusStatisticsEvcYellowTxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.14	Counter64	read-only	The number of yellow bytes transmitted.
C64 me1200PerfMonitorStatusStatisticsEvcRedRxFrames	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.15	Counter64	read-only	The number of red frames received.
C64 me1200PerfMonitorStatusStatisticsEvcRedRxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.16	Counter64	read-only	The number of red bytes received.
C64 me1200PerfMonitorStatusStatisticsEvcDiscardedRxFrames	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.17	Counter64	read-only	The number of frames discarded in the ingress queue system.
C64 me1200PerfMonitorStatusStatisticsEvcDiscardedTxFrames	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.18	Counter64	read-only	The number of frames discarded in the egress queue system.
C64 me1200PerfMonitorStatusStatisticsEvcDiscardedRxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.19	Counter64	read-only	The number of bytes discarded in the ingress queue system.
C64 me1200PerfMonitorStatusStatisticsEvcDiscardedTxBytes	1.3.6.1.4.1.9.9.815.1.117.1.3.1.4.1.20	Counter64	read-only	The number of bytes discarded in the egress queue system.
me1200PerfMonitorStatusStatisticsLmPeerTable	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5		not-accessible	This is a table for displaying PM loss measurement peer statistics.
me1200PerfMonitorStatusStatisticsLmPeerEntry	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1		not-accessible	Each entry has a set of LM statistics for a peer MEP.
U32 me1200PerfMonitorStatusStatisticsLmPeerIntervalId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.1	Unsigned32	not-accessible	The measurement interval identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsLmPeerEntryId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.2	Unsigned32	not-accessible	The entry identifier for the performance monitor data sets.
U32 me1200PerfMonitorStatusStatisticsLmPeerPeerId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.3	Unsigned32	not-accessible	The entry identifier for the peer MEP.
ME1 me1200PerfMonitorStatusStatisticsLmPeerMepInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.4	ME1200Unsigned16	read-only	The MEP instance for the performance monitor data sets.
NUM me1200PerfMonitorStatusStatisticsLmPeerResidencePort	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.5	ME1200InterfaceIndex	read-only	The residence port for the MEP.
ME1 me1200PerfMonitorStatusStatisticsLmPeerMepId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.6	ME1200Unsigned16	read-only	Two bytes CCM MEP ID in the transmitted CCM.
MAC me1200PerfMonitorStatusStatisticsLmPeerMepMacAddress	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.7	MacAddress	read-only	MAC address of this MEP which can be used by other MEP when unicast is selected.
ME1 me1200PerfMonitorStatusStatisticsLmPeerMepPeerMepId	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.8	ME1200Unsigned16	read-only	An expected MEP identifier in the received CCM.
MAC me1200PerfMonitorStatusStatisticsLmPeerMepPeerMacAddress	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.9	MacAddress	read-only	MAC address to be used when unicast is selected with the peer MEP. Also, this MAC is used to create HW checking of receiving CCM PDU from this MEP.
ME1 me1200PerfMonitorStatusStatisticsLmPeerMepDirection	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.11	ME1200MepInstanceDirection	read-only	Upstream or downstream that needs to be monitored.
ME1 me1200PerfMonitorStatusStatisticsLmPeerMepLevel	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.12	ME1200Unsigned8	read-only	The MEG level of this MEP.
U32 me1200PerfMonitorStatusStatisticsLmPeerMepFlowInstance	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.13	Unsigned32	read-only	The MEP is related to this flow depends on 'MepDomain'.
ME1 me1200PerfMonitorStatusStatisticsLmPeerMepTaggedVid	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.14	ME1200Unsigned16	read-only	An outer C/S-tag or the subscriber VID that identifies the subscriber flow in EVC where the MIP is active.
U32 me1200PerfMonitorStatusStatisticsLmPeerPriority	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.15	Unsigned32	read-only	The priority to be inserted as PCP bits in TAG (if any).
ME1 me1200PerfMonitorStatusStatisticsLmPeerRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.16	ME1200MepTxRate	read-only	Frame rate of CCM/LMM PDU which is the inverse of transmission period as described in Y.1731.
U32 me1200PerfMonitorStatusStatisticsLmPeerTx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.17	Unsigned32	read-only	The number of frame transmitted.
U32 me1200PerfMonitorStatusStatisticsLmPeerRx	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.18	Unsigned32	read-only	The number of frame received.
U32 me1200PerfMonitorStatusStatisticsLmPeerNearEndLossCount	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.19	Unsigned32	read-only	The near end loss count.
U32 me1200PerfMonitorStatusStatisticsLmPeerNearEndLossRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.20	Unsigned32	read-only	The near end loss ratio.
U32 me1200PerfMonitorStatusStatisticsLmPeerFarEndLossCount	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.21	Unsigned32	read-only	The far end loss count.
U32 me1200PerfMonitorStatusStatisticsLmPeerFarEndLossRate	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.22	Unsigned32	read-only	The far end loss ratio.
STR me1200PerfMonitorStatusStatisticsLmPeerMepFlowName	1.3.6.1.4.1.9.9.815.1.117.1.3.1.5.1.23	ME1200DisplayString	read-only	The name of the MEP flow instance.
me1200PerfMonitorStatusInterval	1.3.6.1.4.1.9.9.815.1.117.1.3.2
me1200PerfMonitorStatusIntervalInfoTable	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1		not-accessible	This is a table for displaying per type and interval PM time information.
me1200PerfMonitorStatusIntervalInfoEntry	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1.1		not-accessible	Each entry has a set of time information.
U32 me1200PerfMonitorStatusIntervalInfoType	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1.1.1	Unsigned32	not-accessible	The type for the performance monitor interval information. '1' presents LM; '2' presents DM; '3' presents EVC.
U32 me1200PerfMonitorStatusIntervalInfoIntervalId	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1.1.2	Unsigned32	not-accessible	The measurement interval identifier for the performance monitor data sets.
STR me1200PerfMonitorStatusIntervalInfoStartTime	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1.1.3	ME1200DisplayString	read-only	The date and time when PM starts.
STR me1200PerfMonitorStatusIntervalInfoEndTime	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1.1.4	ME1200DisplayString	read-only	The date and time when PM stops.
C64 me1200PerfMonitorStatusIntervalInfoElapsedTime	1.3.6.1.4.1.9.9.815.1.117.1.3.2.1.1.5	Counter64	read-only	The elapsed time ticks for the specific monitoring type and the corresponding interval identifier.
me1200PerfMonitorControl	1.3.6.1.4.1.9.9.815.1.117.1.4
me1200PerfMonitorControlGlobals	1.3.6.1.4.1.9.9.815.1.117.1.4.1
me1200PerfMonitorControlGlobalsAction	1.3.6.1.4.1.9.9.815.1.117.1.4.1.1
T/F me1200PerfMonitorControlGlobalsActionDeleteLmStatisticsAll	1.3.6.1.4.1.9.9.815.1.117.1.4.1.1.1	TruthValue	read-write	Clear all the LM statistics.
T/F me1200PerfMonitorControlGlobalsActionDeleteDmStatisticsAll	1.3.6.1.4.1.9.9.815.1.117.1.4.1.1.2	TruthValue	read-write	Clear all the DM statistics.
T/F me1200PerfMonitorControlGlobalsActionDeleteEvcStatisticsAll	1.3.6.1.4.1.9.9.815.1.117.1.4.1.1.3	TruthValue	read-write	Clear all the EVC statistics.
me1200PerfMonitorMibConformance	1.3.6.1.4.1.9.9.815.1.117.2
me1200PerfMonitorMibCompliances	1.3.6.1.4.1.9.9.815.1.117.2.1
me1200PerfMonitorMibCompliance	1.3.6.1.4.1.9.9.815.1.117.2.1.1			The compliance statement for the implementation.
me1200PerfMonitorMibGroups	1.3.6.1.4.1.9.9.815.1.117.2.2
me1200PerfMonitorConfigGlobalsMgmtInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.1			A collection of objects suitable for bulk operations.
me1200PerfMonitorConfigGlobalsTransferInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.2			A collection of objects suitable for bulk operations.
me1200PerfMonitorConfigGlobalsXferSchedHourTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.3			A collection of objects suitable for bulk operations.
me1200PerfMonitorConfigGlobalsXferSchedQuarterTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.4			A collection of objects suitable for bulk operations.
me1200PerfMonitorConfigGlobalsXferSchedOffsetInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.5			A collection of objects suitable for bulk operations.
me1200PerfMonitorStatusStatisticsLmTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.6			A collection of objects suitable for bulk operations.
me1200PerfMonitorStatusStatisticsDmTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.7			A collection of objects suitable for bulk operations.
me1200PerfMonitorStatusStatisticsDmBinTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.8			A collection of objects suitable for bulk operations.
me1200PerfMonitorStatusStatisticsEvcTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.9			A collection of objects suitable for bulk operations.
me1200PerfMonitorStatusStatisticsLmPeerTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.10			A collection of objects suitable for bulk operations.
me1200PerfMonitorStatusIntervalInfoTableInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.11			A collection of objects suitable for bulk operations.
me1200PerfMonitorControlGlobalsActionInfoGroup	1.3.6.1.4.1.9.9.815.1.117.2.2.12			A collection of objects suitable for bulk operations.

RFC description

Vendor-specific MIB for Microsens ME1200 industrial Ethernet switch platform, defines performance monitoring and statistics objects for network analysis.

Start monitoring Cisco ME1200 Metro Ethernet Access Device (Y.1731 performance monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-PERF-MONITOR-MIB