| OID symbolic | OID numeric | Type | Access | Description |
|---|
| h3cMplsOam | 1.3.6.1.4.1.2011.10.2.79 | | | This MIB contains objects to configure OAM module.
The Operation, Administration and Maintenance (OAM)
is an effective means for decreasing the cost of network maintenance.
The MPLS OAM is used to administrate and maintain MPLS. |
| h3cMplsOamScalarGroup | 1.3.6.1.4.1.2011.10.2.79.1 | | | |
| T/F h3cMplsOamCapability | 1.3.6.1.4.1.2011.10.2.79.1.1 | TruthValue | read-write | Whether OAM is globally capable.
false: incapable;
true: capable;
The default value is incapable. |
| T/F h3cMplsOamTrapOpen | 1.3.6.1.4.1.2011.10.2.79.1.2 | TruthValue | read-write | Whether OAM trap is globally enabled.
false: disable;
true: enable;
The default value is disable. |
| h3cMplsOamTable | 1.3.6.1.4.1.2011.10.2.79.2 | | | |
| h3cMplsOamIgrTable | 1.3.6.1.4.1.2011.10.2.79.2.1 | | not-accessible | This table specifies per-LSP MPLS OAM ingress capability and
associated information, such as IgrLspName and IgrDetType. |
| h3cMplsOamIgrEntry | 1.3.6.1.4.1.2011.10.2.79.2.1.1 | | not-accessible | An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at ingress. |
| U32 h3cMplsOamIgrIndex | 1.3.6.1.4.1.2011.10.2.79.2.1.1.1 | Unsigned32 | not-accessible | This is an unique index for an OAM ingress entry in the OAM table. |
| OCT h3cMplsOamIgrLspName | 1.3.6.1.4.1.2011.10.2.79.2.1.1.2 | OCTET STRING | read-create | The name of an LSP.
It means the LSP name of the detected LSP. |
| INT h3cMplsOamIgrDetectType | 1.3.6.1.4.1.2011.10.2.79.2.1.1.3 | INTEGER | read-create | There are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FFD provides failure detection option for an LSP independent
of the CV based availability model and is not tied to the
CV insertion rate. Insertion rates at 1/s or faster may
also be used.
The CV/FFD packet contains a network-unique identifier (TTSI)
so that all types of defects can be detected.
1: CV;
2: FFD. |
| H3C h3cMplsOamIgrDetectFreq | 1.3.6.1.4.1.2011.10.2.79.2.1.1.4 | H3cMplsOAMDetectFreq | read-create | Indication of the OAM's frequent type. |
| INT h3cMplsOamIgrRevType | 1.3.6.1.4.1.2011.10.2.79.2.1.1.5 | INTEGER | read-create | When an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If private, then the reverse LSP can be used only by the oam ingress;
If shared, the reverse LSP which is shared between many forward
LSPs, whose source LSRs are the same and sink LSRs are the same.
1: private;
2: share. |
| OCT h3cMplsOamIgrRevLspName | 1.3.6.1.4.1.2011.10.2.79.2.1.1.6 | OCTET STRING | read-create | The object indicates the name of the reverse LSP. |
| I32 h3cMplsOamIgrLspId | 1.3.6.1.4.1.2011.10.2.79.2.1.1.7 | Integer32 | read-create | For ingress, the object indicates the lsp ID of
the detected LSP. |
| T/F h3cMplsOamIgrEnable | 1.3.6.1.4.1.2011.10.2.79.2.1.1.8 | TruthValue | read-create | Whether one LSP is OAM enable.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and user can set
other configuration.
false: The OAM function is disabled on the ingress;
true: The OAM function is enabled on the ingress. |
| H3C h3cMplsOamIgrDefectType | 1.3.6.1.4.1.2011.10.2.79.2.1.1.9 | H3cMplsOAMDefectType | read-only | Indication of the OAM's defect type. |
| ROW h3cMplsOamIgrRowStatus | 1.3.6.1.4.1.2011.10.2.79.2.1.1.10 | RowStatus | read-create | This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, h3cMplsOamIgrLspName, h3cMplsOamIgrDetectType,
h3cMplsOamIgrDetectFreq, h3cMplsOamIgrRevType, h3cMplsOamIgrRevLspName,
and h3cMplsOamIgrLspId must be specified. |
| h3cMplsOamEgrTable | 1.3.6.1.4.1.2011.10.2.79.2.2 | | not-accessible | This table specifies per-LSP MPLS OAM capability and
associated information, such as DetectType, DetectFrequency. |
| h3cMplsOamEgrEntry | 1.3.6.1.4.1.2011.10.2.79.2.2.1 | | not-accessible | An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at egress. |
| U32 h3cMplsOamEgrIndex | 1.3.6.1.4.1.2011.10.2.79.2.2.1.1 | Unsigned32 | not-accessible | This is a unique index for an OAM egress entry in the OAM table. |
| OCT h3cMplsOamEgrLspName | 1.3.6.1.4.1.2011.10.2.79.2.2.1.2 | OCTET STRING | read-create | The object indicates the name of static LSP at egress. |
| INT h3cMplsOamEgrDetectType | 1.3.6.1.4.1.2011.10.2.79.2.2.1.3 | INTEGER | read-create | There are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FFD provides failure detection option for an LSP independent
of the CV based availability model and is not tied to the
CV insertion rate. Insertion rates at 1/s or faster may
also be used.
The CV/FFD packet contains a network-unique identifier (TTSI)
so that all types of defects can be detected.
1: CV;
2: FFD. |
| H3C h3cMplsOamEgrDetectFreq | 1.3.6.1.4.1.2011.10.2.79.2.2.1.4 | H3cMplsOAMDetectFreq | read-create | Indication of the OAM's frequent type. |
| INT h3cMplsOamEgrRevType | 1.3.6.1.4.1.2011.10.2.79.2.2.1.5 | INTEGER | read-create | When an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If private, then the reverse LSP can be used only when the only
LSP in defect;
If shared, the reverse LSP, which is shared between many forward
LSPs that have the same source LSRs and sink LSRs.
1: private;
2: share. |
| OCT h3cMplsOamEgrRevLspName | 1.3.6.1.4.1.2011.10.2.79.2.2.1.6 | OCTET STRING | read-create | The object indicates the name of a reverse static-lsp. |
| IP h3cMplsOamEgrLsrId | 1.3.6.1.4.1.2011.10.2.79.2.2.1.7 | IpAddress | read-create | The object indicates the Ingress LSR ID of the LSP. |
| I32 h3cMplsOamEgrLspId | 1.3.6.1.4.1.2011.10.2.79.2.2.1.8 | Integer32 | read-create | The object indicates the the Ingress session lsp ID of the
detected static-LSP. |
| T/F h3cMplsOamEgrEnable | 1.3.6.1.4.1.2011.10.2.79.2.2.1.9 | TruthValue | read-create | Whether one LSP is enabled with OAM.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and user can set
other configuration.
false: The OAM function is disabled on the egress;
true: The OAM function is enabled on the egress. |
| H3C h3cMplsOamEgrDefectType | 1.3.6.1.4.1.2011.10.2.79.2.2.1.10 | H3cMplsOAMDefectType | read-only | Indication of the OAM's defect type. |
| ROW h3cMplsOamEgrRowStatus | 1.3.6.1.4.1.2011.10.2.79.2.2.1.11 | RowStatus | read-create | This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, h3cMplsOamEgrLspName, h3cMplsOamEgrDetectType,
h3cMplsOamEgrDetectFreq, h3cMplsOamEgrRevType, h3cMplsOamEgrRevLspName,
h3cMplsOamEgrLsrId and h3cMplsOamEgrLspId must be specified. |
| h3cMplsOamNotifications | 1.3.6.1.4.1.2011.10.2.79.3 | | | |
| NTF h3cMplsOamIgrLSPOutDefect | 1.3.6.1.4.1.2011.10.2.79.3.1 | | | This notification is generated when the LSP is found
out of the defect state at the LSP ingress. |
| NTF h3cMplsOamIgrLSPInDefect | 1.3.6.1.4.1.2011.10.2.79.3.2 | | | This notification is generated when the LSP is found
in the defect state at the LSP ingress. |
| NTF h3cMplsOamEgrLSPOutDefect | 1.3.6.1.4.1.2011.10.2.79.3.3 | | | This notification is generated when the LSP is found
out of the defect state at the LSP egress. |
| NTF h3cMplsOamEgrLSPInDefect | 1.3.6.1.4.1.2011.10.2.79.3.4 | | | This notification is generated when the LSP is found
in the defect state at the LSP egress. |
