HUAWEI-IPLPM-MIB

All MIBs › HUAWEI-IPLPM-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2014-04-25

Category: Technology: OAM, Vendor: Huawei

Description: Huawei IPLPM (IP Loss and Performance Measurement) MIB providing objects to configure and retrieve IP packet loss ratio measurement sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-IPLPM-MIB?

HUAWEI-IPLPM-MIB is a Huawei-proprietary SNMP module supporting IP Local Performance Monitoring (IPLPM), a feature used on Huawei carrier and enterprise routers/switches to actively measure IP packet loss and latency between network endpoints. It exposes configuration objects for defining measurement sessions (source/destination, test packet parameters, scheduling) alongside the resulting performance metrics such as packet loss ratio and delay statistics. Its primary monitoring value is performance/software status rather than hardware health: administrators use it to verify that a device's forwarding path is meeting service-level objectives, detecting silent packet loss that basic interface counters would miss. It builds on general IP performance measurement concepts and is typically used alongside standard interface and IP MIBs for correlating loss events with specific links. It is deployed in Huawei-based WAN and metro networks where SLA verification between PE/CE or core nodes is required, and operators can download the HUAWEI-IPLPM-MIB file to load it into their SNMP management tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-IPLPM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers
Huawei carrier-grade switches

Monitoring Examples

An administrator would configure an IPLPM test session specifying source and destination addresses and poll the resulting packet-loss-ratio and delay objects on a schedule to catch transient congestion. A sudden spike in the measured loss ratio for a session between two data-center routers would indicate a degrading link or overloaded queue on the path, prompting a look at the associated interface counters. Because sample_objects were not available for this module, exact table/object names cannot be cited, but the measurement-session and loss-ratio semantics come directly from the module description.

What Can Be Monitored

IP packet loss ratio
round-trip/one-way delay
measurement session status
test scheduling configuration

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwIplpmBoardEntityEntry	1.3.6.1.4.1.2011.5.25.328.1.2.2.1		not-accessible	This table contains board entity number.
hwIplpmBoardEntityTable	1.3.6.1.4.1.2011.5.25.328.1.2.2		not-accessible	This table contains board entity number.
I32 hwIplpmBoardNumber	1.3.6.1.4.1.2011.5.25.328.1.2.2.1.1	Integer32	not-accessible	This object indicates board entity number.
I32 hwIplpmBoardPhysicalIndex	1.3.6.1.4.1.2011.5.25.328.1.2.2.1.2	Integer32	read-only	This object indicates board physical index.
hwIplpmCompliance	1.3.6.1.4.1.2011.5.25.328.3.1.1			The compliance statement for entities which implement the IPLPM MIB.
hwIplpmCompliances	1.3.6.1.4.1.2011.5.25.328.3.1
hwIplpmConfiguration	1.3.6.1.4.1.2011.5.25.328.1.1
hwIplpmConformance	1.3.6.1.4.1.2011.5.25.328.3
IP hwIplpmDestIpAddress	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.1	IpAddress	not-accessible	The destination IP address which used to search IP routing table.
IP hwIplpmDestMask	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.2	IpAddress	not-accessible	The destination mask which used to search IP routing table.
I32 hwIplpmDestVrf	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.3	Integer32	not-accessible	The vpn instance ID which used to search IP routing table.
hwIplpmFwdPathSearch	1.3.6.1.4.1.2011.5.25.328.1.4
hwIplpmFwdPathSearchGroup	1.3.6.1.4.1.2011.5.25.328.3.3.5			Description.
hwIplpmGateWaySearchEntry	1.3.6.1.4.1.2011.5.25.328.1.4.1.1		not-accessible	This entry contains gateway information which found by IP address and mask.
hwIplpmGateWaySearchTable	1.3.6.1.4.1.2011.5.25.328.1.4.1		not-accessible	This table contains gateway information which found by IP address and mask.
hwIplpmGlobalConfigGroup	1.3.6.1.4.1.2011.5.25.328.3.3.1			The collection of objects which are used to configure the IPLPM global behavior.
hwIplpmGlobalConfiguration	1.3.6.1.4.1.2011.5.25.328.1.1.1
OCT hwIplpmGlobalHisRecEndTime	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.7	OCTET STRING	read-only	The end time of a global loss history record.
hwIplpmGlobalHisRecordEntry	1.3.6.1.4.1.2011.5.25.328.1.3.1.1		not-accessible	IPLPM global loss measure history record.
I32 hwIplpmGlobalHisRecordNo	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.1	Integer32	not-accessible	The history record number of global loss measure.
hwIplpmGlobalHisRecordTable	1.3.6.1.4.1.2011.5.25.328.1.3.1		not-accessible	The table contains global loss measure history record.
OCT hwIplpmGlobalHisRecStartTime	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.6	OCTET STRING	read-only	The start time of a global loss history record.
I32 hwIplpmGlobalLatestHisRecordNo	1.3.6.1.4.1.2011.5.25.328.1.2.1.2	Integer32	read-only	The object identifies the latest history record number of global loss. The value of -1 means it has not created history record.
C64 hwIplpmGlobalLatestPeriodNo	1.3.6.1.4.1.2011.5.25.328.1.2.1.1	Counter64	read-only	The object identifies the latest period number of global loss.
C64 hwIplpmGlobalLossPkts	1.3.6.1.4.1.2011.5.25.328.1.2.3.1.5	Counter64	read-only	The object indicates the number of loss packets for global loss measure.
I32 hwIplpmGlobalLossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.3.1.6	Integer32	read-only	The object indicates the ratio of loss packets for global loss measure.
NTF hwIplpmGlobalLossRatioExceed	1.3.6.1.4.1.2011.5.25.328.2.1			A hwIplpmGlobalLossRatioExceed trap is sent when the global loss ratio exceeds the uppper threshold in continuous five test intervals.
I32 hwIplpmGlobalLossRatioMax	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.2	Integer32	read-only	The maximum loss ratio of global loss measure during a time.
I32 hwIplpmGlobalLossRatioMin	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.3	Integer32	read-only	The minimum loss ratio of global loss measure during a time.
NTF hwIplpmGlobalLossRatioRecovery	1.3.6.1.4.1.2011.5.25.328.2.2			A hwIplpmGlobalLossRatioRecovery trap is sent when the global loss ratio is under the lower threshold in continuous five test intervals.
HWI hwIplpmGlobalLossStatsErrInfo	1.3.6.1.4.1.2011.5.25.328.1.2.3.1.3	HWIplpmLossStatsErrorInfo	read-only	Error information of global loss statistics.
OCT hwIplpmGlobalPeriodClock	1.3.6.1.4.1.2011.5.25.328.1.2.3.1.4	OCTET STRING	read-only	The string object indicates the time and data.
U32 hwIplpmGlobalPeriodHigh	1.3.6.1.4.1.2011.5.25.328.1.2.3.1.1	Unsigned32	not-accessible	The high period number of global loss statistics.
U32 hwIplpmGlobalPeriodLow	1.3.6.1.4.1.2011.5.25.328.1.2.3.1.2	Unsigned32	not-accessible	The low period number of global loss statistics.
hwIplpmGlobalStatsEntry	1.3.6.1.4.1.2011.5.25.328.1.2.3.1		not-accessible	IPLPM global loss measure configuration information.
hwIplpmGlobalStatsInfo	1.3.6.1.4.1.2011.5.25.328.1.2.1
hwIplpmGlobalStatsTable	1.3.6.1.4.1.2011.5.25.328.1.2.3		not-accessible	The table contains global loss measure information.
hwIplpmGlobalTable	1.3.6.1.4.1.2011.5.25.328.1.1.1.1
C64 hwIplpmGlobalTotalLossPkts	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.4	Counter64	read-only	The loss packets number of global loss measure during a time.
C64 hwIplpmGlobalTotalRecvPkts	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.5	Counter64	read-only	The receive packets number of global loss measure during a time.
I32 hwIplpmGlobalValidStatDataNum	1.3.6.1.4.1.2011.5.25.328.1.3.1.1.8	Integer32	read-only	The valid statistics number of a global loss history record.
hwIplpmGroups	1.3.6.1.4.1.2011.5.25.328.3.3
hwIplpmHistoryRecord	1.3.6.1.4.1.2011.5.25.328.1.3
hwIplpmHistoryRecordGroup	1.3.6.1.4.1.2011.5.25.328.3.3.4			The collection of objects which are used to represent the IPLPM test instance history records.
I32 hwIplpmHostCeVlan	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.7	Integer32	read-only	The interface ce-vlan to which this entry pertains.
I32 hwIplpmHostIfIndex	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.3	Integer32	read-only	The interface index to which this entry pertains.
OCT hwIplpmHostIfName	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.4	OCTET STRING	read-only	The interface name to which this entry pertains.
hwIplpmHostInfoSearchEntry	1.3.6.1.4.1.2011.5.25.328.1.4.2.1		not-accessible	This entry contains host information which found by nexthop IP address and vpn instance ID.
hwIplpmHostInfoSearchTable	1.3.6.1.4.1.2011.5.25.328.1.4.2		not-accessible	This table contains host information which found by nexthop IP address and vpn instance ID.
IP hwIplpmHostIpAddress	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.1	IpAddress	not-accessible	The IP address to which this entry pertains.
OCT hwIplpmHostMacAddress	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.5	OCTET STRING	read-only	The mac address to which this entry pertains.
I32 hwIplpmHostVlan	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.6	Integer32	read-only	The interface vlan to which this entry pertains.
I32 hwIplpmHostVrf	1.3.6.1.4.1.2011.5.25.328.1.4.2.1.2	Integer32	not-accessible	The vpn instance ID to which this entry pertains.
hwIplpmInterfaceConguration	1.3.6.1.4.1.2011.5.25.328.1.1.2
hwIplpmInterfacelConfigGroup	1.3.6.1.4.1.2011.5.25.328.3.3.2			The collection of objects which are used to configure the IPLPM link behavior.
OCT hwIplpmIntfAuthKey	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.5	OCTET STRING	read-write	The password used as authentication key for link loss measure.
I32 hwIplpmIntfAuthKeyId	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.3	Integer32	read-write	Authentication identification of the link loss measure.
INT hwIplpmIntfAuthType	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.4	INTEGER	read-write	Authentication type of the link loss measure. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.
hwIplpmIntfConfigEntry	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1		not-accessible	IPLPM configuration information for a link loss measure instance.
ROW hwIplpmIntfConfigRowStatus	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.8	RowStatus	read-create	Used for controlling the creation and deletion of this row.
hwIplpmIntfConfigTable	1.3.6.1.4.1.2011.5.25.328.1.1.2.1		not-accessible	IPLPM configuration information for a link loss measure instance.
I32 hwIplpmIntfIfIndex	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.1	Integer32	not-accessible	The port index of the link loss measure.
INT hwIplpmIntfInterval	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.2	INTEGER	read-write	This object indicates that interval of link loss measure is 'interval1s(1)' or 'interval10s(10)' or 'interval60s(60)' or 'interval600s(600)'.
INT hwIplpmIntfLossMeasureAlarmEnable	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.7	INTEGER	read-write	This object indicates that the link loss measure alarm function is 'enabled(1)' or 'disabled(2)'.
INT hwIplpmIntfLossMeasureEnable	1.3.6.1.4.1.2011.5.25.328.1.1.2.1.1.6	INTEGER	read-write	This object indicates that the link loss measure function is 'enabled(1)' or 'disabled(2)'.
hwIplpmIpRouteSearchEntry	1.3.6.1.4.1.2011.5.25.328.1.4.4.1		not-accessible	IP routing entry which found by destination IP address and vpn instance ID.
hwIplpmIpRouteSearchTable	1.3.6.1.4.1.2011.5.25.328.1.4.4		not-accessible	This table contains IP routing information which found by destination IP address and vpn instance ID.
C64 hwIplpmLinkBackwardLossPkts	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.7	Counter64	read-only	The object indicates the number of backward loss packets for link loss measure.
I32 hwIplpmLinkBackwardLossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.8	Integer32	read-only	The object indicates the ratio of backward loss packets for link loss measure.
I32 hwIplpmLinkBackwardLossRatioMax	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.6	Integer32	read-only	The maximum loss ratio of link backward measure during a time.
I32 hwIplpmLinkBackwardLossRatioMin	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.7	Integer32	read-only	The minimum loss ratio of link backward measure during a time.
C64 hwIplpmLinkBackwardTotalLossPkts	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.8	Counter64	read-only	The loss packets number of link backward measure during a time.
C64 hwIplpmLinkBackwardTotalRecvPkts	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.9	Counter64	read-only	The received packets number of link backward measure during a time.
C64 hwIplpmLinkForwardLossPkts	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.5	Counter64	read-only	The object indicates the number of forward loss packets for link loss measure.
I32 hwIplpmLinkForwardLossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.6	Integer32	read-only	The object indicates the ratio of forward loss packets for link loss measure.
NTF hwIplpmLinkForwardLossRatioExceed	1.3.6.1.4.1.2011.5.25.328.2.3			A hwIplpmLinkForwardLossRatioExceed trap is sent when the link forward loss ratio exceeds the uppper threshold in continuous five test intervals.
I32 hwIplpmLinkForwardLossRatioMax	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.2	Integer32	read-only	The maximum loss ratio of link forward measure during a time.
I32 hwIplpmLinkForwardLossRatioMin	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.3	Integer32	read-only	The minimum loss ratio of link forward measure during a time.
NTF hwIplpmLinkForwardLossRatioRecovery	1.3.6.1.4.1.2011.5.25.328.2.4			A hwIplpmLinkForwardLossRatioRecovery trap is sent when the link forward loss ratio is under the lower threshold in continuous five test intervals.
C64 hwIplpmLinkForwardTotalLossPkts	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.4	Counter64	read-only	The loss packets number of link forward measure during a time.
C64 hwIplpmLinkForwardTotalRecvPkts	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.5	Counter64	read-only	The received packets number of link forward measure during a time.
OCT hwIplpmLinkHisRecordEndTime	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.11	OCTET STRING	read-only	The end time of a link loss history record.
hwIplpmLinkHisRecordEntryEntry	1.3.6.1.4.1.2011.5.25.328.1.3.2.1		not-accessible	IPLPM link loss measure history record.
hwIplpmLinkHisRecordEntryTable	1.3.6.1.4.1.2011.5.25.328.1.3.2		not-accessible	The table contains link loss measure history record.
I32 hwIplpmLinkHisRecordNo	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.1	Integer32	not-accessible	The history record number of link loss measure.
OCT hwIplpmLinkHisRecordStartTime	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.10	OCTET STRING	read-only	The start time of a link loss history record.
I32 hwIplpmLinkLatestHisRecordNo	1.3.6.1.4.1.2011.5.25.328.1.2.4.1.2	Integer32	read-only	The object identifies the latest history record number of a link loss measure instance. The value of -1 means it has not created history record.
C64 hwIplpmLinkLatestPeriodNo	1.3.6.1.4.1.2011.5.25.328.1.2.4.1.1	Counter64	read-only	The object identifies the latest period number of a link loss measure instance.
hwIplpmLinkLossStatsEntry	1.3.6.1.4.1.2011.5.25.328.1.2.5.1		not-accessible	IPLPM link loss measure statistics.
HWI hwIplpmLinkLossStatsErrInfo	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.3	HWIplpmLossStatsErrorInfo	read-only	Error information of a link loss statistics.
hwIplpmLinkLossStatsTable	1.3.6.1.4.1.2011.5.25.328.1.2.5		not-accessible	The table contains link loss measure information.
OCT hwIplpmLinkPeriodClock	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.4	OCTET STRING	read-only	The string object indicates the time and data for a link loss measure.
U32 hwIplpmLinkPeriodHigh	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.1	Unsigned32	not-accessible	The high period number of a link loss statistics.
U32 hwIplpmLinkPeriodLow	1.3.6.1.4.1.2011.5.25.328.1.2.5.1.2	Unsigned32	not-accessible	The low period number of a link loss statistics.
hwIplpmLinkPeriodNoEntry	1.3.6.1.4.1.2011.5.25.328.1.2.4.1		not-accessible	The table contains link loss period number information.
hwIplpmLinkPeriodNoTable	1.3.6.1.4.1.2011.5.25.328.1.2.4		not-accessible	The table contains link loss period number information.
I32 hwIplpmLinkValidStatDataNum	1.3.6.1.4.1.2011.5.25.328.1.3.2.1.12	Integer32	read-only	The valid statistics number of a link loss history record.
I32 hwIplpmLocalIfIndex	1.3.6.1.4.1.2011.5.25.328.1.4.3.1.2	Integer32	read-only	The interface index to which this entity's local IP address pertains.
INT hwIplpmLocalIfType	1.3.6.1.4.1.2011.5.25.328.1.4.3.1.3	INTEGER	read-only	The interface type to which this entity's local IP address pertains.
I32 hwIplpmLocalIfVrf	1.3.6.1.4.1.2011.5.25.328.1.4.3.1.4	Integer32	read-only	The vpn instance ID to which this entry's IP address binds.
IP hwIplpmLocalIpAddress	1.3.6.1.4.1.2011.5.25.328.1.4.3.1.1	IpAddress	not-accessible	The IP address to which this entry's addressing information pertains.
hwIplpmLocalIpSearchEntry	1.3.6.1.4.1.2011.5.25.328.1.4.3.1		not-accessible	This entry contains local IP address information of this entity.
hwIplpmLocalIpSearchTable	1.3.6.1.4.1.2011.5.25.328.1.4.3		not-accessible	This table contains local IP address information of this entity.
OCT hwIplpmLocalPortList	1.3.6.1.4.1.2011.5.25.328.1.4.3.1.5	OCTET STRING	read-only	The interface index list to which this entity's local IP address pertains.
INT hwIplpmLossMeasureAlarmEnable	1.3.6.1.4.1.2011.5.25.328.1.1.1.1.4	INTEGER	read-write	This object indicates that the global loss measure alarm function is 'enabled(1)' or 'disabled(2)'.
INT hwIplpmLossMeasureColorFlag	1.3.6.1.4.1.2011.5.25.328.1.1.1.1.2	INTEGER	read-write	This value indicates the bits of an IP packet used for color measurement. The character '1' represents the bit0 of the FLAGS byte. The character '2' represents the bit6 of the TOS byte. The character '3' represents the bit7 of the TOS byte.
INT hwIplpmLossMeasureEnable	1.3.6.1.4.1.2011.5.25.328.1.1.1.1.1	INTEGER	read-write	This object indicates that the global loss measure function is 'enabled(1)' or 'disabled(2)'.
INT hwIplpmLossMeasureInterval	1.3.6.1.4.1.2011.5.25.328.1.1.1.1.3	INTEGER	read-write	This object indicates that interval of global loss measure is 'interval1s(1)' or 'interval10s(10)' or 'interval60s(60)' or 'interval600s(600)'.
hwIplpmMib	1.3.6.1.4.1.2011.5.25.328			This MIB describes objects to manage IPLPM (IP Local Performance Monitoring).
IP hwIplpmNetAddress	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.1	IpAddress	not-accessible	The IP address which used to find gateway information.
IP hwIplpmNetIfAddress	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.6	IpAddress	read-only	The IP address of interface to which this entry pertains.
IP hwIplpmNetIfHostAddress	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.15	IpAddress	read-only	The next host IP address to which this entry pertains.
I32 hwIplpmNetIfIndex	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.3	Integer32	read-only	The interface index to which this entry pertains.
OCT hwIplpmNetIfMacAddress	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.5	OCTET STRING	read-only	The mac address of interface to which this entry pertains.
IP hwIplpmNetIfMask	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.7	IpAddress	read-only	The mask of interface to which this entry pertains.
OCT hwIplpmNetIfName	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.4	OCTET STRING	read-only	The interface name to which this entry pertains.
I32 hwIplpmNetIfVlan	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.10	Integer32	read-only	The vlan of interface to which this entry pertains.
OCT hwIplpmNetIfVpnName	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.8	OCTET STRING	read-only	The vpn name of interface to which this entry pertains.
I32 hwIplpmNetIfVrf	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.9	Integer32	read-only	The vpn instance ID of interface to which this entry pertains.
OCT hwIplpmNetIfVrrpMac	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.13	OCTET STRING	read-only	The vrrp virtual mac address to which this entry pertains.
INT hwIplpmNetIfVrrpState	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.14	INTEGER	read-only	The vrrp state to which this entry pertains.
IP hwIplpmNetIfVrrpVip	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.12	IpAddress	read-only	The vrrp virtual IP address to which this entry pertains.
IP hwIplpmNetMask	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.2	IpAddress	not-accessible	The mask which used to find gateway information.
OCT hwIplpmNetSystemMac	1.3.6.1.4.1.2011.5.25.328.1.4.1.1.11	OCTET STRING	read-only	The system mac address of the device.
hwIplpmObjects	1.3.6.1.4.1.2011.5.25.328.1
I32 hwIplpmOutPortIfIndex	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.7	Integer32	read-only	The physical interface ifindex to which this entry's information pertains.
hwIplpmPortFlowStatsEntry	1.3.6.1.4.1.2011.5.25.328.1.2.7.1		not-accessible	The table contains loss measure information of port.
hwIplpmPortFlowStatsTable	1.3.6.1.4.1.2011.5.25.328.1.2.7		not-accessible	The table contains loss measure information of port.
I32 hwIplpmPortInputLossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.7.1.1	Integer32	read-only	The object indicates the input loss ratio of port.
I32 hwIplpmPortOutputLossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.7.1.2	Integer32	read-only	The object indicates the output loss ratio of port.
I32 hwIplpmPortQosQ0LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.1	Integer32	read-only	The object indicates the loss ratio of qos queue 0.
I32 hwIplpmPortQosQ1LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.2	Integer32	read-only	The object indicates the loss ratio of qos queue 1.
I32 hwIplpmPortQosQ2LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.3	Integer32	read-only	The object indicates the loss ratio of qos queue 2.
I32 hwIplpmPortQosQ3LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.4	Integer32	read-only	The object indicates the loss ratio of qos queue 3.
I32 hwIplpmPortQosQ4LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.5	Integer32	read-only	The object indicates the loss ratio of qos queue 4.
I32 hwIplpmPortQosQ5LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.6	Integer32	read-only	The object indicates the loss ratio of qos queue 5.
I32 hwIplpmPortQosQ6LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.7	Integer32	read-only	The object indicates the loss ratio of qos queue 6.
I32 hwIplpmPortQosQ7LossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.8	Integer32	read-only	The object indicates the loss ratio of qos queue 7.
hwIplpmPortQosQueStatsEntry	1.3.6.1.4.1.2011.5.25.328.1.2.6.1		not-accessible	The table contains loss measure information of qos queue.
hwIplpmPortQosQueStatsTable	1.3.6.1.4.1.2011.5.25.328.1.2.6		not-accessible	The table contains loss measure information of qos queue.
I32 hwIplpmPortUserQueLossRatio	1.3.6.1.4.1.2011.5.25.328.1.2.6.1.9	Integer32	read-only	The object indicates the loss ratio of user queue.
IP hwIplpmRouteDstAddr	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.4	IpAddress	read-only	The destination IP address to which this entry's information pertains.
IP hwIplpmRouteDstMask	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.5	IpAddress	read-only	The mask to which this entry's information pertains.
I32 hwIplpmRouteIfIndex	1.3.6.1.4.1.2011.5.25.328.1.4.4.1.6	Integer32	read-only	The logic interface ifindex to which this entry's information pertains.
hwIplpmStatistics	1.3.6.1.4.1.2011.5.25.328.1.2
hwIplpmStatisticsGroup	1.3.6.1.4.1.2011.5.25.328.3.3.3			The collection of objects which are used to represent the IPLPM test instance statistics.
hwIplpmTraps	1.3.6.1.4.1.2011.5.25.328.2
hwIplpmTrapsGroup	1.3.6.1.4.1.2011.5.25.328.3.3.6			The collection of objects which are used to represent the IPLPM traps.

RFC description

Huawei MIB for IP Loss and Packet Loss Measurement, providing performance metrics and statistical data collection for network quality assessment.

Start monitoring Huawei router or carrier-grade switch (IP Local Performance Monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-IPLPM-MIB

What Is HUAWEI-IPLPM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description