All MIBs › HUAWEI-TWAMP-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2016-11-24
Category: Technology: Network Monitoring, Technology: OAM, Technology: SLA/OAM, Vendor: Huawei
Description: Huawei TWAMP (Two-Way Active Measurement Protocol) MIB for managing TWAMP test sessions and round-trip delay measurements.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-TWAMP-MIB?
HUAWEI-TWAMP-MIB is a Huawei Technologies Co.,Ltd. proprietary MIB implementing TWAMP (Two-Way Active Measurement Protocol). Its objects cover controller-client/sender enable flags and a sender table (ID, local/remote IP address type/address, local/remote UDP port, VRF name, DSCP, padding, description, row status, padding type, multi-flow-enable flag), plus a sender-admin table (continual flag, duration, packet count, period, timeout). As a configuration/performance MIB it lets an administrator confirm TWAMP test-session parameters used for round-trip latency/jitter measurement on a Huawei device. It is deployed on Huawei Technologies networking equipment (TWAMP). Engineers can download the HUAWEI-TWAMP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-TWAMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei Technologies networking equipment (TWAMP)
Monitoring Examples
An administrator checks hwTwampSenderAdminPacketCount and hwTwampSenderRemoteIpAddress to confirm a TWAMP test-session's target and packet volume on a Huawei device.
What Can Be Monitored
- TWAMP test-session configuration for latency/jitter measurement
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero | |
| ifDescr | OBJECT-TYPE |
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From Q-BRIDGE-MIB
| VlanIdOrNone |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| mib-2 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwTwamp | 1.3.6.1.4.1.2011.5.25.333 | |||
| hwTwampCompliance | 1.3.6.1.4.1.2011.5.25.333.1.3.1.1 | The compliance statement for systems supporting the HUAWEI-TWAMP-MIB. | ||
| hwTwampCompliances | 1.3.6.1.4.1.2011.5.25.333.1.3.1 | |||
| hwTwampConformance | 1.3.6.1.4.1.2011.5.25.333.1.3 | |||
| hwTwampController | 1.3.6.1.4.1.2011.5.25.333.1.1 | |||
| INT hwTwampControllerClientEnable | 1.3.6.1.4.1.2011.5.25.333.1.1.1 | INTEGER | read-write | This object indicates to enable or disable the TWAMP-light client. |
| hwTwampControllerObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.1 | The hwTwampControllerObjectGroup group.. | ||
| INT hwTwampControllerSenderEnable | 1.3.6.1.4.1.2011.5.25.333.1.1.2 | INTEGER | read-write | This object indicates to enable or disable the TWAMP-light sender. |
| hwTwampGroups | 1.3.6.1.4.1.2011.5.25.333.1.3.2 | |||
| hwTwampMib | 1.3.6.1.4.1.2011.5.25.333.1 | HUAWEI TWAMP funcion. | ||
| hwTwampNoMondatoryGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.99 | No Mandatory Group. | ||
| hwTwampResponder | 1.3.6.1.4.1.2011.5.25.333.1.2 | |||
| VLA hwTwampResponderCEVlan | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.9 | VlanIdOrNone | read-create | This object indicates the CE vlan in a TWAMP-light test instance. |
| STR hwTwampResponderDescription | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.12 | DisplayString | read-create | This object indicates the description of a TWAMP Light test instance. |
| IP hwTwampResponderDestIpAddress | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.5 | InetAddress | read-create | This object indicates the reflector's IP address in a TWAMP-light test instance. |
| IPt hwTwampResponderDestIpAddressType | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.4 | InetAddressType | read-create | This object indicates the reflector's IP address type in a TWAMP-light test instance. |
| I32 hwTwampResponderDestUDPPort | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.7 | Integer32 | read-create | This object indicates the reflector's UDP port in a TWAMP-light test instance. |
| INT hwTwampResponderEnable | 1.3.6.1.4.1.2011.5.25.333.1.2.2 | INTEGER | read-write | This object indicates whether the TWAMP Light responder is enabled. |
| hwTwampResponderEntry | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1 | not-accessible | This object indicates the configuration entry of a TWAMP-light test instance on a reflector. | |
| I32 hwTwampResponderId | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.1 | Integer32 | not-accessible | This object indicates the index of a TWAMP-light test instance on the reflector. |
| NUM hwTwampResponderIfIndex | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.11 | InterfaceIndexOrZero | read-create | This object indicates the interface to which the TWAMP Light test instance is bound. The interface can be a bridge port, but not an aggregated IEEE 802.1 link within a bridge port. By default, the value of IfIndex is 0. |
| hwTwampResponderObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.6 | The hwTwampResponderObjectGroup group. | ||
| VLA hwTwampResponderPEVlan | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.8 | VlanIdOrNone | read-create | This object indicates the PE vlan in a TWAMP-light test instance. |
| ROW hwTwampResponderRowStatus | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.99 | RowStatus | read-create | This object indicates the row status of this entry. |
| IP hwTwampResponderSourceIpAddress | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.3 | InetAddress | read-create | This object indicates the sender's IP address in a TWAMP-light test instance. |
| IPt hwTwampResponderSourceIpAddressType | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.2 | InetAddressType | read-create | This object indicates the sender's IP address type in a TWAMP-light test instance. |
| I32 hwTwampResponderSourceUDPPort | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.6 | Integer32 | read-create | This object indicates the sender's UDP port in a TWAMP-light test instance. |
| hwTwampResponderTable | 1.3.6.1.4.1.2011.5.25.333.1.2.1 | not-accessible | This object indicates the configuration table of TWAMP-light test instances on a reflector. | |
| STR hwTwampResponderVrfName | 1.3.6.1.4.1.2011.5.25.333.1.2.1.1.10 | DisplayString | read-create | This object indicates the VPN name of a TWAMP Light test instance. |
| INT hwTwampSenderAdminContinual | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1.1 | INTEGER | read-create | This object indicates a proactive or on-demand TWAMP-light test instance. If proactive measurement mode is configured, hwTwampSenderAdminDuration and hwTwampSenderAdminPacketCount cannot be configured. If on-demand measurement mode is configured, hwTwampSenderAdminDuration or hwTwampSenderAdminPacketCount must be configured. |
| I32 hwTwampSenderAdminDuration | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1.2 | Integer32 | read-create | This object indicates to start the on-demand TWAMP-light test instance with a duration specified. (0 indicates that the object is not configured. If on-demand measurement mode is configured, hwTwampSenderAdminDuration or hwTwampSenderAdminPacketCount must be set. If hwTwampSenderAdminDuration and hwTwampSenderAdminPacketCount are both set, their values cannot all be 0.) |
| hwTwampSenderAdminEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1 | not-accessible | This object indicates to start a TWAMP-light test instance entry. | |
| hwTwampSenderAdminObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.3 | The HwTwampSenderTestAdminStateEntry group. | ||
| I32 hwTwampSenderAdminPacketCount | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1.3 | Integer32 | read-create | This object indicates to start the on-demand TWAMP-light test instance with the number of sent packets specified. (0 indicates that the object is not configured. If on-demand measurement mode is configured, hwTwampSenderAdminDuration or hwTwampSenderAdminPacketCount must be set. If hwTwampSenderAdminDuration and hwTwampSenderAdminPacketCount are both set, their values cannot all be 0.) |
| INT hwTwampSenderAdminPeriod | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1.4 | INTEGER | read-create | This object indicates a TWAMP-light test instance with a measurement interval specified. |
| ROW hwTwampSenderAdminRowStatus | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1.99 | RowStatus | read-create | This object indicates the row status of this entry. |
| hwTwampSenderAdminTable | 1.3.6.1.4.1.2011.5.25.333.1.1.4 | not-accessible | This object indicates to start a TWAMP-light test instance table. | |
| I32 hwTwampSenderAdminTimeOut | 1.3.6.1.4.1.2011.5.25.333.1.1.4.1.5 | Integer32 | read-create | This object indicates a TWAMP-light test instance with a timeout period specified. |
| hwTwampSenderDelaySeqNumberEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.9.1 | not-accessible | This object indicates the entry for storing the sequence number of the latest delay sampling interval. | |
| hwTwampSenderDelaySeqNumberGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.5 | The hwTwampSenderDelaySeqNumberGroup group. | ||
| hwTwampSenderDelaySeqNumberTable | 1.3.6.1.4.1.2011.5.25.333.1.1.9 | not-accessible | This object indicates the table for storing the sequence numbers of the latest delay sampling intervals. | |
| G32 hwTwampSenderDelaySeqNumberValue | 1.3.6.1.4.1.2011.5.25.333.1.1.9.1.1 | Gauge32 | read-only | This object indicates the sequence number of the latest delay sampling interval. |
| STR hwTwampSenderDescription | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.11 | DisplayString | read-create | This object indicates the description of a TWAMP-light test instance. |
| I32 hwTwampSenderDSCP | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.9 | Integer32 | read-create | This object indicates the DSCP value of a TWAMP-light test instance. |
| hwTwampSenderEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1 | not-accessible | This object indicates to create a TWAMP-light test instance entry. | |
| I32 hwTwampSenderId | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.1 | Integer32 | not-accessible | This object indicates the index of a TWAMP-light test instance. |
| IP hwTwampSenderLocalIpAddress | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.3 | InetAddress | read-create | This object indicates the sender's IP address in a TWAMP-light test instance. |
| IPt hwTwampSenderLocalIpAddressType | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.2 | InetAddressType | read-create | This object indicates the sender's IP address type in a TWAMP-light test instance. |
| I32 hwTwampSenderLocalUDPPort | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.6 | Integer32 | read-create | This object indicates the sender's UDP port of a TWAMP-light test instance. |
| hwTwampSenderLossSeqNumberEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.8.1 | not-accessible | This object indicates the entry for storing the sequence number of the latest packet loss sampling interval. | |
| hwTwampSenderLossSeqNumberGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.4 | The hwTwampSenderLossSeqNumberGroup group. | ||
| hwTwampSenderLossSeqNumberTable | 1.3.6.1.4.1.2011.5.25.333.1.1.8 | not-accessible | This object indicates the table for storing the sequence numbers of the latest packet loss sampling intervals. | |
| G32 hwTwampSenderLossSeqNumberValue | 1.3.6.1.4.1.2011.5.25.333.1.1.8.1.1 | Gauge32 | read-only | This object indicates the sequence number of the latest packet loss sampling interval. |
| INT hwTwampSenderMultiFlowEn | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.101 | INTEGER | read-create | This object indicates the multi-flow enable flag of a TWAMP-light test instance. |
| hwTwampSenderObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.2 | The hwTwampSenderTestEntry group. | ||
| C64 hwTwampSenderOperDiscardCount | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.8 | Counter64 | read-only | This object indicates the number of packets that a TWAMP-light test instance drops. |
| hwTwampSenderOperEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1 | not-accessible | This object indicates the running status entry of a TWAMP-light test instance. | |
| INT hwTwampSenderOperInactiveReason | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.3 | INTEGER | read-only | This object indicates the reason why a TWAMP-light test instance is not started. |
| DAT hwTwampSenderOperLastStartTime | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.4 | DateAndTime | read-only | This object indicates the latest time a TWAMP-light test instance started. |
| DAT hwTwampSenderOperLastStopTime | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.5 | DateAndTime | read-only | This object indicates the latest time a TWAMP-light test instance stopped. |
| C64 hwTwampSenderOperRxCount | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.7 | Counter64 | read-only | This object indicates the number of packets that a TWAMP-light test instance receives. |
| G32 hwTwampSenderOperSequence | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.9 | Gauge32 | read-only | This object indicates the sequence number of a TWAMP-light test instance. |
| INT hwTwampSenderOperState | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.1 | INTEGER | read-only | This object indicates the running status of a TWAMP-light test instance. |
| hwTwampSenderOperTable | 1.3.6.1.4.1.2011.5.25.333.1.1.5 | not-accessible | This object indicates the running status table of a TWAMP-light test instance. | |
| C64 hwTwampSenderOperTxCount | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.6 | Counter64 | read-only | This object indicates the number of packets that a TWAMP-light test instance sends. |
| INT hwTwampSenderOperType | 1.3.6.1.4.1.2011.5.25.333.1.1.5.1.2 | INTEGER | read-only | This object indicates the operating type of a TWAMP-light test instance. |
| I32 hwTwampSenderPadding | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.10 | Integer32 | read-create | This object indicates the padding value of a TWAMP-light test instance. |
| U32 hwTwampSenderPaddingType | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.100 | Unsigned32 | read-create | This object indicates the padding-type value of a TWAMP-light test instance. |
| IP hwTwampSenderRemoteIpAddress | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.5 | InetAddress | read-create | This object indicates the reflector's IP address in a TWAMP-light test instance. |
| IPt hwTwampSenderRemoteIpAddressType | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.4 | InetAddressType | read-create | This object indicates the reflector's IP address type in a TWAMP-light test instance. |
| I32 hwTwampSenderRemoteUDPPort | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.7 | Integer32 | read-create | This object indicates the reflector's UDP port of a TWAMP-light test instance. |
| ROW hwTwampSenderRowStatus | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.99 | RowStatus | read-create | This object indicates the row status of this entry. |
| NTF hwTwampSenderSessionNumExceed | 1.3.6.1.4.1.2011.5.25.333.1.4.9 | A hwTwampSenderSessionNumExceed trap is sent when the number of TWAMP sender session is out of device capability. | ||
| NTF hwTwampSenderSessionNumRecovery | 1.3.6.1.4.1.2011.5.25.333.1.4.10 | A hwTwampSenderSessionNumRecovery trap is sent when the number of TWAMP sender session is under device capability.. | ||
| hwTwampSenderTable | 1.3.6.1.4.1.2011.5.25.333.1.1.3 | not-accessible | This object indicates to create a TWAMP-light test instance table. | |
| I32 hwTwampSenderTwoWayDelayAvgValue | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.2 | Integer32 | read-only | This object indicates the average two-way delay time of a TWAMP-light test instance.(-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayAvgVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.5 | Integer32 | read-only | This object indicates the average two-way jitter time of a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| hwTwampSenderTwoWayDelayEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1 | not-accessible | This object indicates a two-way delay measurement entry. | |
| I32 hwTwampSenderTwoWayDelayMaxValue | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.3 | Integer32 | read-only | This object indicates the maximum two -way delay time of a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayMaxVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.6 | Integer32 | read-only | This object indicates the maximum two-way jitter time of a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayMinValue | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.4 | Integer32 | read-only | This object indicates the minimum two-way delay time of a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayMinVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.7 | Integer32 | read-only | This object indicates the minimum two-way jitter time of a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayRxAvgVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.11 | Integer32 | read-only | This object indicates the average two-way jitter time of a receiver in a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayRxMaxVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.12 | Integer32 | read-only | This object indicates the maximum two-way jitter time of a receiver in a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayRxMinVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.13 | Integer32 | read-only | This object indicates the minimum two-way jitter time of a receiver in a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| G32 hwTwampSenderTwoWayDelaySeq | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.1 | Gauge32 | not-accessible | This object indicates the sequence number of a two-way delay TWAMP-light test instance. |
| hwTwampSenderTwoWayDelayTable | 1.3.6.1.4.1.2011.5.25.333.1.1.6 | not-accessible | This object indicates a two-way delay measurement table. | |
| I32 hwTwampSenderTwoWayDelayTxAvgVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.8 | Integer32 | read-only | This object indicates the average two-way jitter time of a sender in a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayTxMaxVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.9 | Integer32 | read-only | This object indicates the maximum two-way jitter time of a sender in a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| I32 hwTwampSenderTwoWayDelayTxMinVariation | 1.3.6.1.4.1.2011.5.25.333.1.1.6.1.10 | Integer32 | read-only | This object indicates the minimum two-way jitter time of a sender in a TWAMP-light test instance. (-1 means that no packet is sent or received.) |
| U32 hwTwampSenderTwoWayErrorCount | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.6 | Unsigned32 | read-only | This object indicates the number of sent packets in a dual-ended packet error measurement. |
| hwTwampSenderTwoWayLossEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1 | not-accessible | This object indicates a dual-ended packet loss measurement entry. | |
| G32 hwTwampSenderTwoWayLossSeq | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.1 | Gauge32 | not-accessible | This object indicates the sequence number of a dual-ended packet loss measurement. |
| hwTwampSenderTwoWayLossTable | 1.3.6.1.4.1.2011.5.25.333.1.1.7 | not-accessible | This object indicates a dual-ended packet loss measurement table. | |
| I32 hwTwampSenderTwoWayLossValue | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.2 | Integer32 | read-only | This object indicates the number of lost packets in a dual-ended packet loss measurement. |
| I32 hwTwampSenderTwoWaySentCount | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.3 | Integer32 | read-only | This object indicates the number of sent packets in a dual-ended packet loss measurement. |
| U32 hwTwampSenderTwoWayTotalErrorCount | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.7 | Unsigned32 | read-only | This object indicates the total number of sent packets in a dual-ended packet error measurement. |
| U32 hwTwampSenderTwoWayTotalLossValue | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.5 | Unsigned32 | read-only | This object indicates the total number of sent packets in a dual-ended packet loss measurement. |
| U32 hwTwampSenderTwoWayTotalSentCount | 1.3.6.1.4.1.2011.5.25.333.1.1.7.1.4 | Unsigned32 | read-only | This object indicates the total number of sent packets in a dual-ended packet loss measurement. |
| STR hwTwampSenderVrfName | 1.3.6.1.4.1.2011.5.25.333.1.1.3.1.8 | DisplayString | read-create | This object indicates the VPN name of a TWAMP-light test instance. |
| hwTwampTrapGroups | 1.3.6.1.4.1.2011.5.25.333.1.3.3 | |||
| hwTwampTraps | 1.3.6.1.4.1.2011.5.25.333.1.4 | |||
| hwTwampTrapsGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.3.1 | The Group of Twamp twoway performance statistics Trap. | ||
| hwTwampTwoWayDelayAlarmEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.11.1 | not-accessible | An entry in the table, containing information on the TWAMP two-way delay alarm entity. | |
| ROW hwTwampTwoWayDelayAlarmRowStatus | 1.3.6.1.4.1.2011.5.25.333.1.1.11.1.99 | RowStatus | read-create | This object indicates the row status of this entry. |
| hwTwampTwoWayDelayAlarmTable | 1.3.6.1.4.1.2011.5.25.333.1.1.11 | not-accessible | This table is used to query whether the TWAMP two-way delay value triggers alarms. | |
| NTF hwTwampTwoWayDelayExceed | 1.3.6.1.4.1.2011.5.25.333.1.4.3 | A hwTwampTwoWayDelayExceed trap is sent when the two-way delay of TWAMP test instance exceeds the uppper threshold in 3 consecutive test periods. | ||
| hwTwampTwoWayDelayObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.8 | The hwTwampTwoWayDelayObjectGroup group. | ||
| NTF hwTwampTwoWayDelayRecovery | 1.3.6.1.4.1.2011.5.25.333.1.4.4 | A hwTwampTwoWayDelayRecovery trap is sent when the two-way delay of TWAMP test instance is lower than the lower threshold in 3 consecutive test periods. | ||
| I32 hwTwampTwoWayDelayValue | 1.3.6.1.4.1.2011.5.25.333.1.1.11.1.1 | Integer32 | accessible-for-notify | This object indicates the delay value(ms) when the delay of the two-way ETH-DM is higher/lower than the configured alarm threshold. |
| I32 hwTwampTwoWayDelayValueLowerLimitThreshold | 1.3.6.1.4.1.2011.5.25.333.1.1.11.1.3 | Integer32 | read-create | This object indicates the lower limit(ms) of the two-way ETH-DM. |
| I32 hwTwampTwoWayDelayValueUpperLimitThreshold | 1.3.6.1.4.1.2011.5.25.333.1.1.11.1.2 | Integer32 | read-create | This object indicates the upper limit(ms) of the two-way ETH-DM. |
| hwTwampTwoWayJitterAlarmEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.12.1 | not-accessible | An entry in the table, containing information on the TWAMP two-way jitter alarm entity. | |
| ROW hwTwampTwoWayJitterAlarmRowStatus | 1.3.6.1.4.1.2011.5.25.333.1.1.12.1.99 | RowStatus | read-create | This object indicates the row status of this entry. |
| hwTwampTwoWayJitterAlarmTable | 1.3.6.1.4.1.2011.5.25.333.1.1.12 | not-accessible | This table is used to query whether the TWAMP two-way jitter value triggers alarms. | |
| NTF hwTwampTwoWayJitterExceed | 1.3.6.1.4.1.2011.5.25.333.1.4.5 | A hwTwampTwoWayJitterExceed trap is sent when the two-way jitter of TWAMP test instance exceeds the uppper threshold in 3 consecutive test periods. | ||
| hwTwampTwoWayJitterObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.9 | The hwTwampTwoWayJitterObjectGroup group. | ||
| NTF hwTwampTwoWayJitterRecovery | 1.3.6.1.4.1.2011.5.25.333.1.4.6 | A hwTwampTwoWayJitterRecovery trap is sent when the two-way jitter of TWAMP test instance is lower than the lower threshold in 3 consecutive test periods. | ||
| I32 hwTwampTwoWayJitterValue | 1.3.6.1.4.1.2011.5.25.333.1.1.12.1.1 | Integer32 | accessible-for-notify | This object indicates the jitter value(ms) when the jitter of the two-way ETH-DM is higher/lower than the configured alarm threshold. |
| I32 hwTwampTwoWayJitterValueLowerLimitThreshold | 1.3.6.1.4.1.2011.5.25.333.1.1.12.1.3 | Integer32 | read-create | This object indicates lower limit(ms) of the two-way ETH-DM. |
| I32 hwTwampTwoWayJitterValueUpperLimitThreshold | 1.3.6.1.4.1.2011.5.25.333.1.1.12.1.2 | Integer32 | read-create | This object indicates the upper limit(ms) of the two-way ETH-DM. |
| NTF hwTwampTwoWayLocExceed | 1.3.6.1.4.1.2011.5.25.333.1.4.7 | A hwTwampTwoWayLocExceed trap is sent when the two-way loss ratio of the detected network reaches the LOC threshold(100%) in 3 consecutive test periods. | ||
| NTF hwTwampTwoWayLocRecovery | 1.3.6.1.4.1.2011.5.25.333.1.4.8 | A hwTwampTwoWayLocRecovery trap is sent when the two-way loss ratio is lower than the LOC threshold(100%) in 3 consecutive test periods. | ||
| hwTwampTwoWayLossAlarmEntry | 1.3.6.1.4.1.2011.5.25.333.1.1.10.1 | not-accessible | An entry in the table, containing information on the TWAMP two-way loss alarm entity. | |
| ROW hwTwampTwoWayLossAlarmRowStatus | 1.3.6.1.4.1.2011.5.25.333.1.1.10.1.99 | RowStatus | read-create | This object indicates the row status of this entry. |
| hwTwampTwoWayLossAlarmTable | 1.3.6.1.4.1.2011.5.25.333.1.1.10 | not-accessible | This table is used to query whether the TWAMP two-way loss ratio value triggers alarms. | |
| hwTwampTwoWayLossObjectGroup | 1.3.6.1.4.1.2011.5.25.333.1.3.2.7 | The hwTwampTwoWayLossObjectGroup group. | ||
| I32 hwTwampTwoWayLossRatio | 1.3.6.1.4.1.2011.5.25.333.1.1.10.1.1 | Integer32 | accessible-for-notify | This object indicates the loss ratio value when the loss of the two-way ETH-LM is higher/lower than the configured alarm threshold, and the value divided by 1000000 is the loss ratio(%). |
| NTF hwTwampTwoWayLossRatioExceed | 1.3.6.1.4.1.2011.5.25.333.1.4.1 | A hwTwampTwoWayLossRatioExceed trap is sent when the two-way loss ratio of TWAMP test instance exceeds the uppper threshold in 1-minute statistics period. | ||
| I32 hwTwampTwoWayLossRatioLowerLimitThreshold | 1.3.6.1.4.1.2011.5.25.333.1.1.10.1.3 | Integer32 | read-create | This object indicates the lower limit of the two-way ETH-LM, and the value divided by 1000000 is the loss ratio(%). |
| NTF hwTwampTwoWayLossRatioRecovery | 1.3.6.1.4.1.2011.5.25.333.1.4.2 | A hwTwampTwoWayLossRatioRecovery trap is sent when the two-way loss ratio of TWAMP test instance is lower than the lower threshold in 1-minute statistics period. | ||
| I32 hwTwampTwoWayLossRatioUpperLimitThreshold | 1.3.6.1.4.1.2011.5.25.333.1.1.10.1.2 | Integer32 | read-create | This object indicates the upper limit of the two-way ETH-LM, and the value divided by 1000000 is the loss ratio(%). |
RFC description
Vendor-private MIB for Huawei equipment managing Two-Way Active Measurement Protocol (TWAMP) for network performance measurement.
Start monitoring Huawei networking equipment (TWAMP round-trip latency/jitter measurement) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.