ALCATEL-IND1-TIMETRA-VRTR-MIB

All MIBs › ALCATEL-IND1-TIMETRA-VRTR-MIB

Organization: Alcatel

Last Updated: 2008-01-01

Category: IP and Core Protocols, Vendor: Alcatel-Lucent

Description:

Alcatel 7750 SR service router virtual router MIB for managing VRF instances, interfaces, and routing contexts.

Imported Objects

TmnxSlotNum

From ALCATEL-IND1-TIMETRA-FILTER-MIB

TFilterID
TIPFilterID

From ALCATEL-IND1-TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From ALCATEL-IND1-TIMETRA-PORT-MIB

tmnxPortNotifyPortId	OBJECT-TYPE
tmnxPortType	OBJECT-TYPE

From ALCATEL-IND1-TIMETRA-QOS-MIB

TNetworkPolicyID

From ALCATEL-IND1-TIMETRA-SAP-MIB

sapEncapValue	OBJECT-TYPE
sapPortId	OBJECT-TYPE

From ALCATEL-IND1-TIMETRA-SERV-MIB

svcDhcpClientLease	OBJECT-TYPE
svcDhcpLseStateNewChAddr	OBJECT-TYPE
svcDhcpLseStateNewCiAddr	OBJECT-TYPE

From ALCATEL-IND1-TIMETRA-TC-MIB

Dot1PPriority
IpAddressPrefixLength
TCpmProtPolicyID
TDSCPValue
TDSCPValueOrNone
TFCType
TItemDescription
TItemLongDescription
TNamedItem
TNamedItemOrEmpty
TPolicyStatementNameOrEmpty
TmnxAdminState
TmnxBgpAutonomousSystem
TmnxCustId
TmnxDHCP6MsgType
TmnxEncapVal
TmnxOperState
TmnxPortID
TmnxServId
TmnxStatus
TmnxTunnelID
TmnxTunnelType
TmnxVPNRouteDistinguisher
TmnxVRtrID
TmnxVRtrIDOrZero

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressIPv6z
InetAddressPrefixLength
InetAddressType

From IP-FORWARD-MIB

ipCidrRouteEntry

OBJECT-TYPE

From IP-MIB

ipNetToMediaEntry

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeStamp
TruthValue

What Is ALCATEL-IND1-TIMETRA-VRTR-MIB?

ALCATEL-IND1-TIMETRA-VRTR-MIB is part of Alcatel-Lucent's (now Nokia) TiMOS management MIB family for the 7x50 series of service routers (7750 SR and related platforms), specifically covering virtual router (VRF) instances, their interfaces, and routing contexts. It exposes configuration and operational-state data such as the count of configured and active virtual routers, per-VRF administrative and row status, VRF naming, and routing-resource limits like maximum ARP entries and IPv4/IPv6 route-threshold soak timers. Its monitoring value centers on device configuration and service-health status rather than raw hardware sensors: operators track how many virtual routers are provisioned versus active, whether a given VRF's admin/oper state is up, and whether routing-table or ARP-table thresholds are being approached, all of which signal capacity or configuration problems in a multi-tenant routing deployment. Network engineers who search for an ALCATEL-IND1-TIMETRA-VRTR-MIB download are typically looking to compile it alongside the broader TIMETRA MIB family so their NMS can resolve VRF-related OIDs correctly, since VRFs reference shared chassis and interface objects from those other TIMETRA MIBs and standard IETF routing MIB conventions. It is deployed exclusively on Alcatel-Lucent/Nokia 7x50 service router platforms used by service providers for MPLS/VPN and multi-VRF routing.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-TIMETRA-VRTR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

configured vs active virtual router counts
per-VRF admin and row status
VRF naming and identification
maximum ARP entries per VRF
IPv4/IPv6 route threshold soak time

Supported Devices

Nokia 7750 SR-1s / SR-s (2024) — FP5-based service router, current flagship of the 7750 SR family, still runs SR OS with VRF/VPRN support

Monitoring Examples

An operator would poll vRtrConfiguredVRtrs and vRtrActiveVRtrs to confirm the expected number of virtual routers is actually up, and walk vRtrConfTable/vRtrConfEntry indexed by vRtrID to check each VRF's vRtrName, vRtrAdminState, and vRtrRowStatus. A VRF whose vRtrAdminState shows down while vRtrRowStatus is active indicates a misconfigured or failed virtual router that needs investigation. Monitoring vRtrMaxARPEntries against actual ARP table usage also flags VRFs approaching their configured capacity limits before they start dropping new ARP resolutions.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraVRtrMIBModule	1.3.6.1.4.1.6527.1.1.3.3			This document is the SNMP MIB module to manage and provision the Alcatel 7x50 device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxDot1pAppEntry	1.3.6.1.4.1.6527.3.1.2.3.50.1		not-accessible	Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization.
TDO tmnxDot1pAppId	1.3.6.1.4.1.6527.3.1.2.3.50.1.1	TDot1pAppId	not-accessible	The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel 7x50 SR router.
TIM tmnxDot1pAppLastChanged	1.3.6.1.4.1.6527.3.1.2.3.50.1.2	TimeStamp	read-only	The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDot1pAppTable	1.3.6.1.4.1.6527.3.1.2.3.50		not-accessible	The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system.
TIM tmnxDot1pAppTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.49	TimeStamp	read-only	The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
DOT tmnxDot1pAppValue	1.3.6.1.4.1.6527.3.1.2.3.50.1.3	Dot1PPriority	read-write	The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific.
TDS tmnxDscpAppDscpValue	1.3.6.1.4.1.6527.3.1.2.3.46.1.3	TDSCPValueOrNone	read-write	The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific.
tmnxDscpAppEntry	1.3.6.1.4.1.6527.3.1.2.3.46.1		not-accessible	Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization.
TDS tmnxDscpAppId	1.3.6.1.4.1.6527.3.1.2.3.46.1.1	TDSCPAppId	not-accessible	The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel 7x50 SR router which generates control traffic over IP.
TIM tmnxDscpAppLastChanged	1.3.6.1.4.1.6527.3.1.2.3.46.1.2	TimeStamp	read-only	The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDscpAppTable	1.3.6.1.4.1.6527.3.1.2.3.46		not-accessible	The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system.
TIM tmnxDscpAppTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.45	TimeStamp	read-only	The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDscpAppV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.36			The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel 7x50 SR series systems release 6.0.
TDS tmnxDscpFCDscpValue	1.3.6.1.4.1.6527.3.1.2.3.48.1.1	TDSCPValue	not-accessible	The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue.
tmnxDscpFCEntry	1.3.6.1.4.1.6527.3.1.2.3.48.1		not-accessible	Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization.
TIM tmnxDscpFCLastChanged	1.3.6.1.4.1.6527.3.1.2.3.48.1.3	TimeStamp	read-only	The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDscpFCTable	1.3.6.1.4.1.6527.3.1.2.3.48		not-accessible	The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system.
TIM tmnxDscpFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.47	TimeStamp	read-only	The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFC tmnxDscpFCValue	1.3.6.1.4.1.6527.3.1.2.3.48.1.4	TFCType	read-write	The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0.
tmnxVRtr7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.4			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R4.0.
tmnxVRtr7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.6			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R5.0.
tmnxVRtr7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.8			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R6.0.
tmnxVRtr7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.5			The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R4.0.
tmnxVRtr7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.7			The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R5.0.
tmnxVRtr77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.9			The compliance statement for management of VRTR instances on Alcatel 7x50 SR series systems release R6.0.
NTF tmnxVRtrBfdMaxSessionOnSlot	1.3.6.1.4.1.6527.3.1.3.3.0.18			The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'.
NTF tmnxVRtrBfdPortTypeNotSupported	1.3.6.1.4.1.6527.3.1.3.3.0.19			The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'.
NTF tmnxVRtrBfdSessionDeleted	1.3.6.1.4.1.6527.3.1.3.3.0.33			The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted.
NTF tmnxVRtrBfdSessionDown	1.3.6.1.4.1.6527.3.1.3.3.0.17			The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down.
NTF tmnxVRtrBfdSessionProtChange	1.3.6.1.4.1.6527.3.1.3.3.0.34			The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session.
NTF tmnxVRtrBfdSessionUp	1.3.6.1.4.1.6527.3.1.3.3.0.28			The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up.
tmnxVRtrBfdV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.18			The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems.
tmnxVRtrBfdV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.41			The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel 7xxx series systems.
tmnxVRtrCompliances	1.3.6.1.4.1.6527.3.1.1.3.1
tmnxVRtrConformance	1.3.6.1.4.1.6527.3.1.1.3
NTF tmnxVRtrDHCP6AssignedIllegSubnet	1.3.6.1.4.1.6527.3.1.3.3.0.26			The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface.
NTF tmnxVRtrDHCP6ClientMacUnresolved	1.3.6.1.4.1.6527.3.1.3.3.0.27			The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet.
NTF tmnxVRtrDHCP6IllegalClientAddr	1.3.6.1.4.1.6527.3.1.3.3.0.25			The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface.
NTF tmnxVRtrDHCP6LseStateOverride	1.3.6.1.4.1.6527.3.1.3.3.0.23			The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length.
NTF tmnxVRtrDHCP6RelayLseStExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.21			The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate.
NTF tmnxVRtrDHCP6RelayReplyStripUni	1.3.6.1.4.1.6527.3.1.3.3.0.24			The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message.
NTF tmnxVRtrDHCP6ServerLseStExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.22			The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates.
NTF tmnxVRtrDHCPAFEntriesExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.10			The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter.
NTF tmnxVRtrDHCPIfLseStatesExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.20			The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate.
NTF tmnxVRtrDHCPLeaseStateOverride	1.3.6.1.4.1.6527.3.1.3.3.0.13			The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
NTF tmnxVRtrDHCPLseStatePopulateErr	1.3.6.1.4.1.6527.3.1.3.3.0.16			The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
NTF tmnxVRtrDHCPLseStRestoreProblem	1.3.6.1.4.1.6527.3.1.3.3.0.15			The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record.
NTF tmnxVRtrDHCPLseStsExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.12			The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit.
NTF tmnxVRtrDHCPSuspiciousPcktRcvd	1.3.6.1.4.1.6527.3.1.3.3.0.14			The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
tmnxVRtrGlobalObjs	1.3.6.1.4.1.6527.3.1.2.3.15
tmnxVRtrGlobalR2r1Group	1.3.6.1.4.1.6527.3.1.1.3.2.10			The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel 7x50 SR series systems.
tmnxVRtrGlobalV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.38			The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrGroups	1.3.6.1.4.1.6527.3.1.1.3.2
NTF tmnxVRtrHighRouteCleared	1.3.6.1.4.1.6527.3.1.3.3.0.3			The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification.
NTF tmnxVRtrHighRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.2			The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
tmnxVRtrIfCpmProtectGroup	1.3.6.1.4.1.6527.3.1.1.3.2.35			The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel 7xxx series systems.
tmnxVRtrIfDHCPRelayGroup	1.3.6.1.4.1.6527.3.1.1.3.2.37			The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
tmnxVRtrIfDhcpServerGroup	1.3.6.1.4.1.6527.3.1.1.3.2.31			The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfIpcpV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.34			The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
tmnxVRtrIfSubscrAuthV3v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.11			The group of objects supporting management of DHCP authentication on version 3.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.15			The group of objects supporting management of virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.25			The group of objects supporting management of virtual interfaces on version 5.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrIllegalLabelTCA	1.3.6.1.4.1.6527.3.1.3.3.0.4			The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold.
tmnxVRtrIpV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.16			The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIpV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.26			The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrIPv6HighRouteCleared	1.3.6.1.4.1.6527.3.1.3.3.0.31			The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification.
NTF tmnxVRtrIPv6HighRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.30			The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
tmnxVRtrIPv6IfV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.20			The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IpV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.22			The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IpV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.24			The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrIPv6MidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.29			The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
tmnxVRtrIPv6V4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.21			The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrManagedRouteAddFailed	1.3.6.1.4.1.6527.3.1.3.3.0.35			The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed.
NTF tmnxVRtrMaxArpEntriesCleared	1.3.6.1.4.1.6527.3.1.3.3.0.9			The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification.
NTF tmnxVRtrMaxArpEntriesTCA	1.3.6.1.4.1.6527.3.1.3.3.0.8			The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported.
NTF tmnxVRtrMaxRoutes	1.3.6.1.4.1.6527.3.1.3.3.0.11			The tmnxVRtrMaxRoutes notification is generated when the number of routes contained in a VPRN reaches the value specified by vRtrMaxNumRoutes.
NTF tmnxVRtrMcastMaxRoutesCleared	1.3.6.1.4.1.6527.3.1.3.3.0.7			The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification.
NTF tmnxVRtrMcastMaxRoutesTCA	1.3.6.1.4.1.6527.3.1.3.3.0.6			The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrMcastMidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.5			The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrMidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.1			The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
tmnxVRtrNotificationObjects	1.3.6.1.4.1.6527.3.1.2.3.21
tmnxVRtrNotificationObjV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.30			The group of objects supporting management of notification objects on Alcatel 7x50 SR 5.0 series systems.
tmnxVRtrNotificationObjV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.39			The group of objects supporting management of notification objects on Alcatel 7x50 SR 6.0 series systems.
tmnxVRtrNotifications	1.3.6.1.4.1.6527.3.1.3.3.0
tmnxVRtrNotificationV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.19			The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrNotificationV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.28			The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems.
tmnxVRtrNotificationV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.40			The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel 7xx0 SR series systems.
tmnxVRtrNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.3
tmnxVRtrObjs	1.3.6.1.4.1.6527.3.1.2.3
tmnxVRtrObsoletedObjectsV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.17			The group of objects no longer supported in version 4.0 of Alcatel 7x50 SR series systems.
tmnxVRtrObsoleteNotificationGroup	1.3.6.1.4.1.6527.3.1.1.3.2.23			The group of obsolete notifications for the transport and virtual router capabilities on Alcatel 7x50 SR series systems.
tmnxVRtrObsoleteV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.29			The group of objects in ALCATEL-IND1-TIMETRA-VRTR-MIB which are obsoleted in Alcatel 7x50 SR 5.0 series systems.
NTF tmnxVRtrStaticRouteCPEStatus	1.3.6.1.4.1.6527.3.1.3.3.0.32			The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable.
tmnxVRtrStaticRteCPEChkV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.33			The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.14			The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.27			The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
tmnxVRtrV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.32			The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
INT vRiaBcastAddrFormat	1.3.6.1.4.1.6527.3.1.2.3.6.1.5	INTEGER	read-create	When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255.
T/F vRiaIgpInhibit	1.3.6.1.4.1.6527.3.1.2.3.6.1.7	TruthValue	read-create	This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.
INT vRiaIndex	1.3.6.1.4.1.6527.3.1.2.3.6.1.1	INTEGER	not-accessible	The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted.
IP vRiaInetAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.9	InetAddress	read-create	The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.
IPt vRiaInetAddressType	1.3.6.1.4.1.6527.3.1.2.3.6.1.8	InetAddressType	read-create	vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.
TMN vRiaInetAddrState	1.3.6.1.4.1.6527.3.1.2.3.6.1.11	TmnxInetAddrState	read-only	The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.
T/F vRiaInetEui64	1.3.6.1.4.1.6527.3.1.2.3.6.1.12	TruthValue	read-create	The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.
IP vRiaInetGwAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.15	InetAddress	read-create	The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.
IPt vRiaInetGwAddressType	1.3.6.1.4.1.6527.3.1.2.3.6.1.14	InetAddressType	read-create	The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.
IP vRiaInetOperAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.13	InetAddress	read-only	The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.
ADR vRiaInetPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.6.1.10	InetAddressPrefixLength	read-create	The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.
IP vRiaInetRemoteIp	1.3.6.1.4.1.6527.3.1.2.3.6.1.17	InetAddress	read-create	The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.
IPt vRiaInetRemoteIpType	1.3.6.1.4.1.6527.3.1.2.3.6.1.16	InetAddressType	read-create	The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.
IP vRiaIpAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.3	IpAddress	read-create	The IP address assigned to a router's interface.
IP vRiaNetMask	1.3.6.1.4.1.6527.3.1.2.3.6.1.4	IpAddress	read-create	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
INT vRiaReasmMaxSize	1.3.6.1.4.1.6527.3.1.2.3.6.1.6	INTEGER	read-create	The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.
ROW vRiaRowStatus	1.3.6.1.4.1.6527.3.1.2.3.6.1.2	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.
G32 vRtrActiveVRtrs	1.3.6.1.4.1.6527.3.1.2.3.15.3	Gauge32	read-only	The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminStatus equal 'inService'.
TMN vRtrAdminState	1.3.6.1.4.1.6527.3.1.2.3.1.1.3	TmnxAdminState	read-create	The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.
T/F vRtrAdvPrefixAutonomousFlag	1.3.6.1.4.1.6527.3.1.2.3.23.1.6	TruthValue	read-create	Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address.
vRtrAdvPrefixEntry	1.3.6.1.4.1.6527.3.1.2.3.23.1		not-accessible	An entry in the vRtrAdvPrefixTable.
NUM vRtrAdvPrefixIfIndex	1.3.6.1.4.1.6527.3.1.2.3.23.1.1	InterfaceIndex	not-accessible	The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
ADR vRtrAdvPrefixLength	1.3.6.1.4.1.6527.3.1.2.3.23.1.3	InetAddressPrefixLength	not-accessible	The prefix length associated with this prefix. The value 0 has no special meaning for this object.
T/F vRtrAdvPrefixOnLinkFlag	1.3.6.1.4.1.6527.3.1.2.3.23.1.5	TruthValue	read-create	This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
U32 vRtrAdvPrefixPreferredLifetime	1.3.6.1.4.1.6527.3.1.2.3.23.1.7	Unsigned32	read-create	The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
IP vRtrAdvPrefixPrefix	1.3.6.1.4.1.6527.3.1.2.3.23.1.2	InetAddress	not-accessible	The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes.
ROW vRtrAdvPrefixRowStatus	1.3.6.1.4.1.6527.3.1.2.3.23.1.4	RowStatus	read-create	The row status used for creation and deletion of router advertisement prefix entries.
vRtrAdvPrefixTable	1.3.6.1.4.1.6527.3.1.2.3.23		not-accessible	This table allows the user to configure IPv6 prefixes for router advertisements on an interface
U32 vRtrAdvPrefixValidLifetime	1.3.6.1.4.1.6527.3.1.2.3.23.1.8	Unsigned32	read-create	The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
G32 vRtrAggregateActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.15	Gauge32	read-only	vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.
G32 vRtrAggregateRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.14	Gauge32	read-only	vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.
TMN vRtrAggregationAggregatorAS	1.3.6.1.4.1.6527.3.1.2.3.13.1.7	TmnxBgpAutonomousSystem	read-create	When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
IP vRtrAggregationAggregatorIPAddr	1.3.6.1.4.1.6527.3.1.2.3.13.1.8	IpAddress	read-create	When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
T/F vRtrAggregationASSet	1.3.6.1.4.1.6527.3.1.2.3.13.1.6	TruthValue	read-create	When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR.
IP vRtrAggregationIpPrefix	1.3.6.1.4.1.6527.3.1.2.3.13.1.1	IpAddress	not-accessible	IP address prefix to match for the aggregation.
ADR vRtrAggregationIpPrefixMask	1.3.6.1.4.1.6527.3.1.2.3.13.1.2	IpAddressPrefixLength	not-accessible	Mask length for vRtrAggregationIpPrefix, to match for the aggregation.
TIM vRtrAggregationLastChanged	1.3.6.1.4.1.6527.3.1.2.3.13.1.4	TimeStamp	read-create	Time stamp of last change of any object for this entry.
TMN vRtrAggregationOperState	1.3.6.1.4.1.6527.3.1.2.3.13.1.9	TmnxOperState	read-only	vRtrAggregationOperState specifies the current operational status of the aggregation entry.
ROW vRtrAggregationRowStatus	1.3.6.1.4.1.6527.3.1.2.3.13.1.3	RowStatus	read-create	Row status for this entry.
T/F vRtrAggregationSummaryOnly	1.3.6.1.4.1.6527.3.1.2.3.13.1.5	TruthValue	read-create	When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised.
TMN vRtrAS	1.3.6.1.4.1.6527.3.1.2.3.1.1.12	TmnxBgpAutonomousSystem	read-create	The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated.
IP vRtrAutoFilterDHCPClientAddress	1.3.6.1.4.1.6527.3.1.2.3.21.1	IpAddress	accessible-for-notify	The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address.
U32 vRtrAutoFilterDHCPClientLease	1.3.6.1.4.1.6527.3.1.2.3.21.2	Unsigned32	accessible-for-notify	The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time.
BIT vRtrBfdMaxSessionReason	1.3.6.1.4.1.6527.3.1.2.3.21.16	Bits	accessible-for-notify	The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
TMN vRtrBfdSlotNumber	1.3.6.1.4.1.6527.3.1.2.3.21.14	TmnxSlotNum	accessible-for-notify	The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
G32 vRtrBGPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.9	Gauge32	read-only	vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.
G32 vRtrBGPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.8	Gauge32	read-only	vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.
TMN vRtrBgpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.6	TmnxStatus	read-create	The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.
TMN vRtrConfederationAS	1.3.6.1.4.1.6527.3.1.2.3.1.1.18	TmnxBgpAutonomousSystem	read-create	The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.
vRtrConfEntry	1.3.6.1.4.1.6527.3.1.2.3.1.1		not-accessible	Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the ALCATEL-IND1-TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.
G32 vRtrConfiguredVRtrs	1.3.6.1.4.1.6527.3.1.2.3.15.2	Gauge32	read-only	The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.
vRtrConfTable	1.3.6.1.4.1.6527.3.1.2.3.1		not-accessible	The vRtrConfTable has an entry for each virtual router configured in the system.
TMN vRtrCustId	1.3.6.1.4.1.6527.3.1.2.3.1.1.30	TmnxCustId	read-only	When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.
TIT vRtrDescription	1.3.6.1.4.1.6527.3.1.2.3.1.1.25	TItemDescription	read-create	The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
IP vRtrDHCP6AssignedNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.22	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client.
IPt vRtrDHCP6AssignedNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.21	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr.
ADR vRtrDHCP6AssignedPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.23	InetAddressPrefixLength	accessible-for-notify	The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr.
IP vRtrDHCP6ClientNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.20	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client.
IPt vRtrDHCP6ClientNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.19	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr.
vRtrDHCP6DropStatEntry	1.3.6.1.4.1.6527.3.1.2.3.41.1		not-accessible	Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
TIM vRtrDHCP6DropStatLastCleared	1.3.6.1.4.1.6527.3.1.2.3.41.1.2	TimeStamp	read-only	The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
G32 vRtrDHCP6DropStatPktsDropped	1.3.6.1.4.1.6527.3.1.2.3.41.1.3	Gauge32	read-only	The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason.
INT vRtrDHCP6DropStatReason	1.3.6.1.4.1.6527.3.1.2.3.41.1.1	INTEGER	not-accessible	The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option
vRtrDHCP6DropStatTable	1.3.6.1.4.1.6527.3.1.2.3.41		not-accessible	The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system.
STR vRtrDHCP6LeaseOverrideResult	1.3.6.1.4.1.6527.3.1.2.3.21.29	DisplayString	accessible-for-notify	The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden.
vRtrDHCP6MsgStatEntry	1.3.6.1.4.1.6527.3.1.2.3.42.1		not-accessible	Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
G32 vRtrDHCP6MsgStatsDropped	1.3.6.1.4.1.6527.3.1.2.3.42.1.5	Gauge32	read-only	The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
TIM vRtrDHCP6MsgStatsLstClrd	1.3.6.1.4.1.6527.3.1.2.3.42.1.2	TimeStamp	read-only	The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
TMN vRtrDHCP6MsgStatsMsgType	1.3.6.1.4.1.6527.3.1.2.3.42.1.1	TmnxDHCP6MsgType	not-accessible	The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis.
G32 vRtrDHCP6MsgStatsRcvd	1.3.6.1.4.1.6527.3.1.2.3.42.1.3	Gauge32	read-only	The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
G32 vRtrDHCP6MsgStatsSent	1.3.6.1.4.1.6527.3.1.2.3.42.1.4	Gauge32	read-only	The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
vRtrDHCP6MsgStatTable	1.3.6.1.4.1.6527.3.1.2.3.42		not-accessible	The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system.
OCT vRtrDHCP6NewClientId	1.3.6.1.4.1.6527.3.1.2.3.21.27	OCTET STRING	accessible-for-notify	The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID).
IP vRtrDHCP6OldAssignedNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.25	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client.
IPt vRtrDHCP6OldAssignedNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.24	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr.
ADR vRtrDHCP6OldAssignedPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.26	InetAddressPrefixLength	accessible-for-notify	The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr.
OCT vRtrDHCP6OldClientId	1.3.6.1.4.1.6527.3.1.2.3.21.28	OCTET STRING	accessible-for-notify	The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID).
IP vRtrDHCP6ServerNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.18	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server.
IPt vRtrDHCP6ServerNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.17	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr.
I32 vRtrDHCPClientLease	1.3.6.1.4.1.6527.3.1.2.3.21.3	Integer32	accessible-for-notify	The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap.
MAC vRtrDhcpLseStateNewChAddr	1.3.6.1.4.1.6527.3.1.2.3.21.7	MacAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap.
IP vRtrDhcpLseStateNewCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.6	IpAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap.
MAC vRtrDhcpLseStateOldChAddr	1.3.6.1.4.1.6527.3.1.2.3.21.5	MacAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state.
IP vRtrDhcpLseStateOldCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.4	IpAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state.
STR vRtrDhcpLseStatePopulateError	1.3.6.1.4.1.6527.3.1.2.3.21.13	DisplayString	accessible-for-notify	The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message.
STR vRtrDhcpPacketProblem	1.3.6.1.4.1.6527.3.1.2.3.21.12	DisplayString	accessible-for-notify	The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system.
IP vRtrDhcpRestoreLseStateCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.8	IpAddress	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap.
NUM vRtrDhcpRestoreLseStateIfIndex	1.3.6.1.4.1.6527.3.1.2.3.21.10	InterfaceIndex	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap.
STR vRtrDhcpRestoreLseStateProblem	1.3.6.1.4.1.6527.3.1.2.3.21.11	DisplayString	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored.
TMN vRtrDhcpRestoreLseStateVRtrId	1.3.6.1.4.1.6527.3.1.2.3.21.9	TmnxVRtrID	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap.
G32 vRtrDirectActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.3	Gauge32	read-only	vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.
G32 vRtrDirectRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.2	Gauge32	read-only	vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.
U32 vRtrEcmpMaxRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.11	Unsigned32	read-create	The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.
TPO vRtrExportPolicy1	1.3.6.1.4.1.6527.3.1.2.3.16.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy2	1.3.6.1.4.1.6527.3.1.2.3.16.1.7	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy3	1.3.6.1.4.1.6527.3.1.2.3.16.1.8	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy4	1.3.6.1.4.1.6527.3.1.2.3.16.1.9	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy5	1.3.6.1.4.1.6527.3.1.2.3.16.1.10	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
STR vRtrFailureDescription	1.3.6.1.4.1.6527.3.1.2.3.21.36	DisplayString	accessible-for-notify	The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent.
T/F vRtrGracefulRestart	1.3.6.1.4.1.6527.3.1.2.3.1.1.26	TruthValue	read-create	The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.
INT vRtrGracefulRestartType	1.3.6.1.4.1.6527.3.1.2.3.1.1.27	INTEGER	read-create	The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover
U32 vRtrHighRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.21	Unsigned32	read-only	The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
G32 vRtrHostActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.63	Gauge32	read-only	The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.
G32 vRtrHostRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.62	Gauge32	read-only	The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.
vRtrIcmp6Entry	1.3.6.1.4.1.6527.3.1.2.3.31.1		not-accessible	Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted.
C32 vRtrIcmp6InAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.31.1.4	Counter32	read-only	The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance.
C32 vRtrIcmp6InDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.31.1.3	Counter32	read-only	The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance.
C32 vRtrIcmp6InEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.31.1.9	Counter32	read-only	The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance.
C32 vRtrIcmp6InEchos	1.3.6.1.4.1.6527.3.1.2.3.31.1.8	Counter32	read-only	The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance.
C32 vRtrIcmp6InErrors	1.3.6.1.4.1.6527.3.1.2.3.31.1.2	Counter32	read-only	The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
C32 vRtrIcmp6InGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.31.1.15	Counter32	read-only	The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance.
C32 vRtrIcmp6InGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.31.1.17	Counter32	read-only	The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance.
C32 vRtrIcmp6InGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.31.1.16	Counter32	read-only	The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance.
C32 vRtrIcmp6InMsgs	1.3.6.1.4.1.6527.3.1.2.3.31.1.1	Counter32	read-only	The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors.
C32 vRtrIcmp6InNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.13	Counter32	read-only	The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance.
C32 vRtrIcmp6InNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.12	Counter32	read-only	The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance.
C32 vRtrIcmp6InParmProblems	1.3.6.1.4.1.6527.3.1.2.3.31.1.6	Counter32	read-only	The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance.
C32 vRtrIcmp6InPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.31.1.7	Counter32	read-only	The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance.
C32 vRtrIcmp6InRedirects	1.3.6.1.4.1.6527.3.1.2.3.31.1.14	Counter32	read-only	The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance.
C32 vRtrIcmp6InRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.11	Counter32	read-only	The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance.
C32 vRtrIcmp6InRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.10	Counter32	read-only	The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance.
C32 vRtrIcmp6InTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.31.1.5	Counter32	read-only	The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance.
C32 vRtrIcmp6OutAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.31.1.21	Counter32	read-only	The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance.
C32 vRtrIcmp6OutDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.31.1.20	Counter32	read-only	The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance.
C32 vRtrIcmp6OutEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.31.1.26	Counter32	read-only	The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance.
C32 vRtrIcmp6OutEchos	1.3.6.1.4.1.6527.3.1.2.3.31.1.25	Counter32	read-only	The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance.
C32 vRtrIcmp6OutErrors	1.3.6.1.4.1.6527.3.1.2.3.31.1.19	Counter32	read-only	The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C32 vRtrIcmp6OutGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.31.1.32	Counter32	read-only	The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.31.1.34	Counter32	read-only	The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.31.1.33	Counter32	read-only	The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance.
C32 vRtrIcmp6OutMsgs	1.3.6.1.4.1.6527.3.1.2.3.31.1.18	Counter32	read-only	The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors.
C32 vRtrIcmp6OutNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.30	Counter32	read-only	The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance.
C32 vRtrIcmp6OutNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.29	Counter32	read-only	The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance.
C32 vRtrIcmp6OutParmProblems	1.3.6.1.4.1.6527.3.1.2.3.31.1.23	Counter32	read-only	The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance.
C32 vRtrIcmp6OutPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.31.1.24	Counter32	read-only	The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance.
C32 vRtrIcmp6OutRedirects	1.3.6.1.4.1.6527.3.1.2.3.31.1.31	Counter32	read-only	The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance.
C32 vRtrIcmp6OutRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.28	Counter32	read-only	The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance.
C32 vRtrIcmp6OutRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.27	Counter32	read-only	The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance.
C32 vRtrIcmp6OutTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.31.1.22	Counter32	read-only	The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance.
vRtrIcmp6Table	1.3.6.1.4.1.6527.3.1.2.3.31		not-accessible	The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance.
TMN vRtrID	1.3.6.1.4.1.6527.3.1.2.3.1.1.1	TmnxVRtrID	accessible-for-notify	The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.
TMN vRtrIfAdminState	1.3.6.1.4.1.6527.3.1.2.3.4.1.8	TmnxAdminState	read-create	The desired administrative state for this router interface.
STR vRtrIfAlias	1.3.6.1.4.1.6527.3.1.2.3.4.1.10	DisplayString	read-create	An alternative administrative name assigned this router interface.
INT vRtrIfArpPopulate	1.3.6.1.4.1.6527.3.1.2.3.4.1.38	INTEGER	read-create	The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.
U32 vRtrIfArpTimeout	1.3.6.1.4.1.6527.3.1.2.3.4.1.12	Unsigned32	read-create	The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.
TMN vRtrIfBfdAdminState	1.3.6.1.4.1.6527.3.1.2.3.33.1.1	TmnxAdminState	read-write	The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot.
U32 vRtrIfBfdEchoInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.5	Unsigned32	read-write	The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface.
vRtrIfBfdEntry	1.3.6.1.4.1.6527.3.1.2.3.33.1		not-accessible	Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
U32 vRtrIfBfdMultiplier	1.3.6.1.4.1.6527.3.1.2.3.33.1.4	Unsigned32	read-write	The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault.
U32 vRtrIfBfdReceiveInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.3	Unsigned32	read-write	The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface.
C32 vRtrIfBfdSessionDownCount	1.3.6.1.4.1.6527.3.1.2.3.34.1.13	Counter32	read-only	The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'.
vRtrIfBfdSessionEntry	1.3.6.1.4.1.6527.3.1.2.3.34.1		not-accessible	Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
TIM vRtrIfBfdSessionLastDownTime	1.3.6.1.4.1.6527.3.1.2.3.34.1.10	TimeStamp	read-only	The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down.
TIM vRtrIfBfdSessionLastUpTime	1.3.6.1.4.1.6527.3.1.2.3.34.1.11	TimeStamp	read-only	The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up.
IP vRtrIfBfdSessionLclAddr	1.3.6.1.4.1.6527.3.1.2.3.34.1.2	InetAddress	not-accessible	The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType.
IPt vRtrIfBfdSessionLclAddrType	1.3.6.1.4.1.6527.3.1.2.3.34.1.1	InetAddressType	not-accessible	The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr.
U32 vRtrIfBfdSessionLclDisc	1.3.6.1.4.1.6527.3.1.2.3.34.1.14	Unsigned32	read-only	The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session.
C32 vRtrIfBfdSessionMesgRecv	1.3.6.1.4.1.6527.3.1.2.3.34.1.8	Counter32	read-only	The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session.
C32 vRtrIfBfdSessionMesgSent	1.3.6.1.4.1.6527.3.1.2.3.34.1.9	Counter32	read-only	The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session.
BIT vRtrIfBfdSessionOperFlags	1.3.6.1.4.1.6527.3.1.2.3.34.1.7	Bits	read-only	The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up.
TMN vRtrIfBfdSessionOperState	1.3.6.1.4.1.6527.3.1.2.3.34.1.5	TmnxOperState	read-only	The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface.
BIT vRtrIfBfdSessionProtocols	1.3.6.1.4.1.6527.3.1.2.3.34.1.16	Bits	read-only	The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session.
IP vRtrIfBfdSessionRemAddr	1.3.6.1.4.1.6527.3.1.2.3.34.1.4	InetAddress	not-accessible	The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType.
IPt vRtrIfBfdSessionRemAddrType	1.3.6.1.4.1.6527.3.1.2.3.34.1.3	InetAddressType	not-accessible	The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr.
U32 vRtrIfBfdSessionRemDisc	1.3.6.1.4.1.6527.3.1.2.3.34.1.15	Unsigned32	read-only	The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session.
U32 vRtrIfBfdSessionRxInterval	1.3.6.1.4.1.6527.3.1.2.3.34.1.18	Unsigned32	read-only	The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdReceiveInterval' and the remote node's transmit interval.
INT vRtrIfBfdSessionState	1.3.6.1.4.1.6527.3.1.2.3.34.1.6	INTEGER	read-only	The value of vRtrIfBfdSessionState indicates the state of the BFD protocl on this interface.
vRtrIfBfdSessionTable	1.3.6.1.4.1.6527.3.1.2.3.34		not-accessible	The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings.
U32 vRtrIfBfdSessionTxInterval	1.3.6.1.4.1.6527.3.1.2.3.34.1.17	Unsigned32	read-only	The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdTransmitInterval' and the remote node's receive interval.
INT vRtrIfBfdSessionType	1.3.6.1.4.1.6527.3.1.2.3.34.1.19	INTEGER	read-only	The value of vRtrIfBfdSessionType indicates if the bfd session is running on IOM or CPM.
C32 vRtrIfBfdSessionUpCount	1.3.6.1.4.1.6527.3.1.2.3.34.1.12	Counter32	read-only	The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'.
vRtrIfBfdTable	1.3.6.1.4.1.6527.3.1.2.3.33		not-accessible	The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices.
U32 vRtrIfBfdTransmitInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.2	Unsigned32	read-write	The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface.
INT vRtrIfCflowd	1.3.6.1.4.1.6527.3.1.2.3.4.1.32	INTEGER	read-create	The value of vRtrIfCflowd specifies the type of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of none (1) indicates that there is no Cflowd analysis associated with this interface.
U32 vRtrIfChannelID	1.3.6.1.4.1.6527.3.1.2.3.4.1.6	Unsigned32	read-create	When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.
TCP vRtrIfCpmProtPolicyId	1.3.6.1.4.1.6527.3.1.2.3.4.1.68	TCpmProtPolicyID	read-create	The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
G32 vRtrIfCpmProtUncfgdProtoDropCnt	1.3.6.1.4.1.6527.3.1.2.3.4.1.69	Gauge32	read-only	The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
U32 vRtrIfDelaySeconds	1.3.6.1.4.1.6527.3.1.2.3.4.1.64	Unsigned32	read-create	The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. The default value of vRtrIfDelaySeconds is 0. It indicates that the interface will become operational as soon as it is enabled.
I32 vRtrIfDelayUpTimer	1.3.6.1.4.1.6527.3.1.2.3.4.1.65	Integer32	read-only	The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.
TIT vRtrIfDescription	1.3.6.1.4.1.6527.3.1.2.3.4.1.34	TItemLongDescription	read-create	The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TMN vRtrIfDHCP6AdminState	1.3.6.1.4.1.6527.3.1.2.3.36.1.2	TmnxAdminState	read-create	The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed.
U32 vRtrIfDHCP6CurrLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.36.1.15	Unsigned32	read-only	The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function.
U32 vRtrIfDHCP6CurrServerLeaseStates	1.3.6.1.4.1.6527.3.1.2.3.36.1.21	Unsigned32	read-only	The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function.
TIT vRtrIfDHCP6Description	1.3.6.1.4.1.6527.3.1.2.3.36.1.4	TItemDescription	read-create	The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
T/F vRtrIfDHCP6EnableNgbrResolution	1.3.6.1.4.1.6527.3.1.2.3.36.1.17	TruthValue	read-create	The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4.
vRtrIfDHCP6Entry	1.3.6.1.4.1.6527.3.1.2.3.36.1		not-accessible	Each row entry represents information related to DHCP6 Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
STR vRtrIfDHCP6ItfIdString	1.3.6.1.4.1.6527.3.1.2.3.36.1.22	DisplayString	read-create	The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4).
TIM vRtrIfDHCP6LastChanged	1.3.6.1.4.1.6527.3.1.2.3.36.1.1	TimeStamp	read-only	The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry.
U32 vRtrIfDHCP6LeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.36.1.14	Unsigned32	read-create	The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface.
INT vRtrIfDHCP6OperState	1.3.6.1.4.1.6527.3.1.2.3.36.1.3	INTEGER	read-only	The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node.
INT vRtrIfDHCP6PfxdAdminState	1.3.6.1.4.1.6527.3.1.2.3.36.1.19	INTEGER	read-create	The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system.
OCT vRtrIfDHCP6PfxdDUID	1.3.6.1.4.1.6527.3.1.2.3.40.1.6	OCTET STRING	read-create	The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router.
vRtrIfDHCP6PfxDelegationEntry	1.3.6.1.4.1.6527.3.1.2.3.40.1		not-accessible	Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus.
TIM vRtrIfDHCP6PfxDelegationLstChgd	1.3.6.1.4.1.6527.3.1.2.3.39	TimeStamp	read-only	The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable
vRtrIfDHCP6PfxDelegationTable	1.3.6.1.4.1.6527.3.1.2.3.40		not-accessible	The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned.
U32 vRtrIfDHCP6PfxdIAID	1.3.6.1.4.1.6527.3.1.2.3.40.1.7	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done.
TIM vRtrIfDHCP6PfxdLastChanged	1.3.6.1.4.1.6527.3.1.2.3.40.1.4	TimeStamp	read-only	The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed.
ADR vRtrIfDHCP6PfxdPrefix	1.3.6.1.4.1.6527.3.1.2.3.40.1.1	InetAddressIPv6	not-accessible	The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated.
ADR vRtrIfDHCP6PfxdPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.40.1.2	InetAddressPrefixLength	not-accessible	The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system.
U32 vRtrIfDHCP6PfxdPrefLifetime	1.3.6.1.4.1.6527.3.1.2.3.40.1.8	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity.
ROW vRtrIfDHCP6PfxdRowStatus	1.3.6.1.4.1.6527.3.1.2.3.40.1.3	RowStatus	read-create	The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6).
U32 vRtrIfDHCP6PfxdValidLifetime	1.3.6.1.4.1.6527.3.1.2.3.40.1.9	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity.
INT vRtrIfDHCP6RelayItfIdOption	1.3.6.1.4.1.6527.3.1.2.3.36.1.13	INTEGER	read-create	The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used.
ADR vRtrIfDHCP6RelayServer1	1.3.6.1.4.1.6527.3.1.2.3.36.1.5	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer2	1.3.6.1.4.1.6527.3.1.2.3.36.1.6	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer3	1.3.6.1.4.1.6527.3.1.2.3.36.1.7	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer4	1.3.6.1.4.1.6527.3.1.2.3.36.1.8	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer5	1.3.6.1.4.1.6527.3.1.2.3.36.1.9	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer6	1.3.6.1.4.1.6527.3.1.2.3.36.1.10	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer7	1.3.6.1.4.1.6527.3.1.2.3.36.1.11	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer8	1.3.6.1.4.1.6527.3.1.2.3.36.1.12	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to.
T/F vRtrIfDHCP6RemoteIdOption	1.3.6.1.4.1.6527.3.1.2.3.36.1.18	TruthValue	read-create	The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId.
U32 vRtrIfDHCP6ServerMaxLeaseStates	1.3.6.1.4.1.6527.3.1.2.3.36.1.20	Unsigned32	read-create	The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface.
ADR vRtrIfDHCP6SourceAddress	1.3.6.1.4.1.6527.3.1.2.3.36.1.16	InetAddressIPv6	read-create	The value of the object vRtrIfDHCP6SourceAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system Ipv6 address is taken.
vRtrIfDHCP6Table	1.3.6.1.4.1.6527.3.1.2.3.36		not-accessible	The vRtrIfDHCP6Table is used to configure the interface parameters for the DHCP6 Relay agent.
TIM vRtrIfDHCP6TableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.35	TimeStamp	read-only	The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table
TMN vRtrIfDHCPAdminState	1.3.6.1.4.1.6527.3.1.2.3.19.1.15	TmnxAdminState	read-create	vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'.
MAC vRtrIfDHCPAntiSpoofMacAddr	1.3.6.1.4.1.6527.3.1.2.3.19.1.35	MacAddress	read-create	The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'.
TPO vRtrIfDHCPAuthPolicy	1.3.6.1.4.1.6527.3.1.2.3.19.1.20	TPolicyStatementNameOrEmpty	read-create	Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable.
U32 vRtrIfDHCPAutoFilter	1.3.6.1.4.1.6527.3.1.2.3.19.1.5	Unsigned32	read-create	vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address.
TFI vRtrIfDHCPAutoFilterId	1.3.6.1.4.1.6527.3.1.2.3.19.1.18	TFilterID	read-only	vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface.
BIT vRtrIfDHCPClientApplications	1.3.6.1.4.1.6527.3.1.2.3.19.1.36	Bits	read-create	The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface.
TIT vRtrIfDHCPDescription	1.3.6.1.4.1.6527.3.1.2.3.19.1.17	TItemDescription	read-create	The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
vRtrIfDHCPEntry	1.3.6.1.4.1.6527.3.1.2.3.19.1		not-accessible	Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
IP vRtrIfDHCPGiAddress	1.3.6.1.4.1.6527.3.1.2.3.19.1.24	InetAddress	read-create	The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType.
T/F vRtrIfDHCPGiAddressAsSrc	1.3.6.1.4.1.6527.3.1.2.3.19.1.25	TruthValue	read-create	The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on.
IPt vRtrIfDHCPGiAddressType	1.3.6.1.4.1.6527.3.1.2.3.19.1.23	InetAddressType	read-create	The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address.
T/F vRtrIfDHCPLayer2Header	1.3.6.1.4.1.6527.3.1.2.3.19.1.34	TruthValue	read-create	The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used.
U32 vRtrIfDHCPLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.19.1.21	Unsigned32	read-create	The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface.
vRtrIfDHCPLeaseStateEntry	1.3.6.1.4.1.6527.3.1.2.3.22.1		not-accessible	DHCP lease state information for a virtual router interface.
vRtrIfDHCPLeaseStateTable	1.3.6.1.4.1.6527.3.1.2.3.22		not-accessible	vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLeaseStateTable.
MAC vRtrIfDHCPLseStateChAddr	1.3.6.1.4.1.6527.3.1.2.3.22.1.2	MacAddress	read-only	The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state.
IP vRtrIfDHCPLseStateCiAddr	1.3.6.1.4.1.6527.3.1.2.3.22.1.1	IpAddress	not-accessible	The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state.
OCT vRtrIfDHCPLseStateOption82	1.3.6.1.4.1.6527.3.1.2.3.22.1.4	OCTET STRING	read-only	vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state.
U32 vRtrIfDHCPLseStatePersistKey	1.3.6.1.4.1.6527.3.1.2.3.22.1.5	Unsigned32	read-only	The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file.
U32 vRtrIfDHCPLseStateRemainLseTime	1.3.6.1.4.1.6527.3.1.2.3.22.1.3	Unsigned32	read-only	The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state.
T/F vRtrIfDHCPMatchOption82	1.3.6.1.4.1.6527.3.1.2.3.19.1.26	TruthValue	read-create	The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used.
U32 vRtrIfDHCPOperAutoFilter	1.3.6.1.4.1.6527.3.1.2.3.19.1.19	Unsigned32	read-only	The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages.
U32 vRtrIfDHCPOperLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.19.1.22	Unsigned32	read-only	The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface.
TMN vRtrIfDHCPProxyAdminState	1.3.6.1.4.1.6527.3.1.2.3.19.1.28	TmnxAdminState	read-create	The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'.
U32 vRtrIfDHCPProxyLeaseTime	1.3.6.1.4.1.6527.3.1.2.3.19.1.30	Unsigned32	read-create	The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
T/F vRtrIfDHCPProxyLTRadiusOverride	1.3.6.1.4.1.6527.3.1.2.3.19.1.31	TruthValue	read-create	The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
IP vRtrIfDHCPProxyServerAddr	1.3.6.1.4.1.6527.3.1.2.3.19.1.29	IpAddress	read-create	The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server.
C32 vRtrIfDHCPRelayAuthPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.9	Counter32	read-only	vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful.
C32 vRtrIfDHCPRelayAuthPktsSuccess	1.3.6.1.4.1.6527.3.1.2.3.20.1.10	Counter32	read-only	vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful.
INT vRtrIfDHCPRelayCircuitId	1.3.6.1.4.1.6527.3.1.2.3.19.1.3	INTEGER	read-create	The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
C32 vRtrIfDHCPRelayClientPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.5	Counter32	read-only	vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsProxLS	1.3.6.1.4.1.6527.3.1.2.3.20.1.14	Counter32	read-only	vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
C32 vRtrIfDHCPRelayClientPktsProxRad	1.3.6.1.4.1.6527.3.1.2.3.20.1.13	Counter32	read-only	vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server.
C32 vRtrIfDHCPRelayClientPktsRelayed	1.3.6.1.4.1.6527.3.1.2.3.20.1.6	Counter32	read-only	vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsSnooped	1.3.6.1.4.1.6527.3.1.2.3.20.1.11	Counter32	read-only	vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent.
INT vRtrIfDHCPRelayInfoAction	1.3.6.1.4.1.6527.3.1.2.3.19.1.2	INTEGER	read-create	vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information.
T/F vRtrIfDHCPRelayInfoOption	1.3.6.1.4.1.6527.3.1.2.3.19.1.1	TruthValue	read-create	vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled.
C32 vRtrIfDHCPRelayPktsGenForceRenew	1.3.6.1.4.1.6527.3.1.2.3.20.1.16	Counter32	read-only	vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients.
C32 vRtrIfDHCPRelayPktsGenRelease	1.3.6.1.4.1.6527.3.1.2.3.20.1.15	Counter32	read-only	vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server.
INT vRtrIfDHCPRelayRemoteId	1.3.6.1.4.1.6527.3.1.2.3.19.1.4	INTEGER	read-create	The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id.
STR vRtrIfDHCPRelayRemoteIdStr	1.3.6.1.4.1.6527.3.1.2.3.19.1.27	DisplayString	read-create	The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'.
C32 vRtrIfDHCPRelayRxMalformedPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.3	Counter32	read-only	vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayRxPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.1	Counter32	read-only	vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayRxUntrustedPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.4	Counter32	read-only	vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent.
IP vRtrIfDHCPRelayServer1	1.3.6.1.4.1.6527.3.1.2.3.19.1.6	IpAddress	read-create	vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer2	1.3.6.1.4.1.6527.3.1.2.3.19.1.7	IpAddress	read-create	vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer3	1.3.6.1.4.1.6527.3.1.2.3.19.1.8	IpAddress	read-create	vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer4	1.3.6.1.4.1.6527.3.1.2.3.19.1.9	IpAddress	read-create	vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer5	1.3.6.1.4.1.6527.3.1.2.3.19.1.10	IpAddress	read-create	vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer6	1.3.6.1.4.1.6527.3.1.2.3.19.1.11	IpAddress	read-create	vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer7	1.3.6.1.4.1.6527.3.1.2.3.19.1.12	IpAddress	read-create	vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer8	1.3.6.1.4.1.6527.3.1.2.3.19.1.13	IpAddress	read-create	vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded.
C32 vRtrIfDHCPRelayServerPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.7	Counter32	read-only	vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsRelayed	1.3.6.1.4.1.6527.3.1.2.3.20.1.8	Counter32	read-only	vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsSnooped	1.3.6.1.4.1.6527.3.1.2.3.20.1.12	Counter32	read-only	vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent.
vRtrIfDHCPRelayStatsEntry	1.3.6.1.4.1.6527.3.1.2.3.20.1		not-accessible	Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfDHCPRelayStatsTable	1.3.6.1.4.1.6527.3.1.2.3.20		not-accessible	The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent.
T/F vRtrIfDHCPRelayTrusted	1.3.6.1.4.1.6527.3.1.2.3.19.1.14	TruthValue	read-create	When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero.
C32 vRtrIfDHCPRelayTxPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.2	Counter32	read-only	vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent.
INT vRtrIfDHCPSnooping	1.3.6.1.4.1.6527.3.1.2.3.19.1.16	INTEGER	read-create	vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface.
vRtrIfDHCPTable	1.3.6.1.4.1.6527.3.1.2.3.19		not-accessible	The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent.
BIT vRtrIfDHCPVendorIncludeOptions	1.3.6.1.4.1.6527.3.1.2.3.19.1.32	Bits	read-create	The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'.
STR vRtrIfDHCPVendorOptionString	1.3.6.1.4.1.6527.3.1.2.3.19.1.33	DisplayString	read-create	The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'.
T/F vRtrIfDirectedBroadcast	1.3.6.1.4.1.6527.3.1.2.3.4.1.29	TruthValue	read-create	When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.
TIP vRtrIfEgressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.28	TIPFilterID	read-create	The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TMN vRtrIfEncapValue	1.3.6.1.4.1.6527.3.1.2.3.4.1.7	TmnxEncapVal	read-create	The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.
vRtrIfEntry	1.3.6.1.4.1.6527.3.1.2.3.4.1		not-accessible	Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
U32 vRtrIfGlobalIndex	1.3.6.1.4.1.6527.3.1.2.3.4.1.63	Unsigned32	read-only	The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
vRtrIfGlobalIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.37.1		not-accessible	Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
vRtrIfGlobalIndexTable	1.3.6.1.4.1.6527.3.1.2.3.37		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).
TMN vRtrIfGlobalIndexvRtrID	1.3.6.1.4.1.6527.3.1.2.3.37.1.1	TmnxVRtrID	read-only	The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.
NUM vRtrIfGlobalIndexvRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.37.1.2	InterfaceIndex	read-only	The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
vRtrIfIcmp6Entry	1.3.6.1.4.1.6527.3.1.2.3.32.1		not-accessible	Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
C32 vRtrIfIcmp6InAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.32.1.4	Counter32	read-only	The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface.
C32 vRtrIfIcmp6InDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.32.1.3	Counter32	read-only	The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface.
C32 vRtrIfIcmp6InEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.32.1.9	Counter32	read-only	The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface.
C32 vRtrIfIcmp6InEchos	1.3.6.1.4.1.6527.3.1.2.3.32.1.8	Counter32	read-only	The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface.
C32 vRtrIfIcmp6InErrors	1.3.6.1.4.1.6527.3.1.2.3.32.1.2	Counter32	read-only	The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
C32 vRtrIfIcmp6InGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.32.1.15	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface.
C32 vRtrIfIcmp6InGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.32.1.17	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface.
C32 vRtrIfIcmp6InGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.32.1.16	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface.
C32 vRtrIfIcmp6InMsgs	1.3.6.1.4.1.6527.3.1.2.3.32.1.1	Counter32	read-only	The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages.
C32 vRtrIfIcmp6InNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.13	Counter32	read-only	The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface.
C32 vRtrIfIcmp6InNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.12	Counter32	read-only	The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface.
C32 vRtrIfIcmp6InParmProblems	1.3.6.1.4.1.6527.3.1.2.3.32.1.6	Counter32	read-only	The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface.
C32 vRtrIfIcmp6InPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.32.1.7	Counter32	read-only	The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface.
C32 vRtrIfIcmp6InRedirects	1.3.6.1.4.1.6527.3.1.2.3.32.1.14	Counter32	read-only	The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface.
C32 vRtrIfIcmp6InRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.11	Counter32	read-only	The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface.
C32 vRtrIfIcmp6InRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.10	Counter32	read-only	The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface.
C32 vRtrIfIcmp6InTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.32.1.5	Counter32	read-only	The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface.
C32 vRtrIfIcmp6OutAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.32.1.21	Counter32	read-only	The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface.
C32 vRtrIfIcmp6OutDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.32.1.20	Counter32	read-only	The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface.
C32 vRtrIfIcmp6OutEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.32.1.26	Counter32	read-only	The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface.
C32 vRtrIfIcmp6OutEchos	1.3.6.1.4.1.6527.3.1.2.3.32.1.25	Counter32	read-only	The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface.
C32 vRtrIfIcmp6OutErrors	1.3.6.1.4.1.6527.3.1.2.3.32.1.19	Counter32	read-only	The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C32 vRtrIfIcmp6OutGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.32.1.36	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.32.1.38	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.32.1.37	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface.
C32 vRtrIfIcmp6OutMsgs	1.3.6.1.4.1.6527.3.1.2.3.32.1.18	Counter32	read-only	The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors.
C32 vRtrIfIcmp6OutNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.33	Counter32	read-only	The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface.
TIM vRtrIfIcmp6OutNbrAdvTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.34	TimeStamp	read-only	The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface.
C32 vRtrIfIcmp6OutNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.31	Counter32	read-only	The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface.
TIM vRtrIfIcmp6OutNbrSolicitsTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.32	TimeStamp	read-only	The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface.
C32 vRtrIfIcmp6OutParmProblems	1.3.6.1.4.1.6527.3.1.2.3.32.1.23	Counter32	read-only	The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface.
C32 vRtrIfIcmp6OutPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.32.1.24	Counter32	read-only	The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface.
C32 vRtrIfIcmp6OutRedirects	1.3.6.1.4.1.6527.3.1.2.3.32.1.35	Counter32	read-only	The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface.
C32 vRtrIfIcmp6OutRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.29	Counter32	read-only	The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface.
TIM vRtrIfIcmp6OutRtrAdvTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.30	TimeStamp	read-only	The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface.
C32 vRtrIfIcmp6OutRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.27	Counter32	read-only	The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface.
TIM vRtrIfIcmp6OutRtrSolicitsTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.28	TimeStamp	read-only	The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface.
C32 vRtrIfIcmp6OutTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.32.1.22	Counter32	read-only	The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface.
vRtrIfIcmp6Table	1.3.6.1.4.1.6527.3.1.2.3.32		not-accessible	The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface.
T/F vRtrIfIcmpMaskReply	1.3.6.1.4.1.6527.3.1.2.3.4.1.13	TruthValue	read-create	When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.
U32 vRtrIfIcmpNumRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.15	Unsigned32	read-create	The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.
U32 vRtrIfIcmpNumTtlExpired	1.3.6.1.4.1.6527.3.1.2.3.4.1.21	Unsigned32	read-create	The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.
U32 vRtrIfIcmpNumUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.18	Unsigned32	read-create	The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.
T/F vRtrIfIcmpRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.14	TruthValue	read-create	When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.
U32 vRtrIfIcmpRedirectsTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.16	Unsigned32	read-create	The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.
T/F vRtrIfIcmpTtlExpired	1.3.6.1.4.1.6527.3.1.2.3.4.1.20	TruthValue	read-create	When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.
U32 vRtrIfIcmpTtlExpiredTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.22	Unsigned32	read-create	The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.
T/F vRtrIfIcmpUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.17	TruthValue	read-create	When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.
U32 vRtrIfIcmpUnreachablesTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.19	Unsigned32	read-create	The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.
U32 vRtrIfIcmpV6NumParamProblem	1.3.6.1.4.1.6527.3.1.2.3.4.1.56	Unsigned32	read-create	The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.
U32 vRtrIfIcmpV6NumPktTooBig	1.3.6.1.4.1.6527.3.1.2.3.4.1.53	Unsigned32	read-create	The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.
U32 vRtrIfIcmpV6NumRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.44	Unsigned32	read-create	The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.
U32 vRtrIfIcmpV6NumTimeExceeded	1.3.6.1.4.1.6527.3.1.2.3.4.1.50	Unsigned32	read-create	The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.
U32 vRtrIfIcmpV6NumUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.47	Unsigned32	read-create	The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.
T/F vRtrIfIcmpV6ParamProblem	1.3.6.1.4.1.6527.3.1.2.3.4.1.55	TruthValue	read-create	The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.
U32 vRtrIfIcmpV6ParamProblemTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.57	Unsigned32	read-create	The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6PktTooBig	1.3.6.1.4.1.6527.3.1.2.3.4.1.52	TruthValue	read-create	The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.
U32 vRtrIfIcmpV6PktTooBigTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.54	Unsigned32	read-create	The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6Redirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.43	TruthValue	read-create	When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.
U32 vRtrIfIcmpV6RedirectsTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.45	Unsigned32	read-create	The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.
T/F vRtrIfIcmpV6TimeExceeded	1.3.6.1.4.1.6527.3.1.2.3.4.1.49	TruthValue	read-create	The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.
U32 vRtrIfIcmpV6TimeExceededTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.51	Unsigned32	read-create	The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6Unreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.46	TruthValue	read-create	When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.
U32 vRtrIfIcmpV6UnreachablesTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.48	Unsigned32	read-create	The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.
NUM vRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.4.1.1	InterfaceIndex	accessible-for-notify	The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
TIP vRtrIfIngressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.27	TIPFilterID	read-create	The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
T/F vRtrIfInitDelayEnable	1.3.6.1.4.1.6527.3.1.2.3.4.1.67	TruthValue	read-create	The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.
vRtrIfIpcpEntry	1.3.6.1.4.1.6527.3.1.2.3.43.1		not-accessible	Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
IP vRtrIfIpcpPeerAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.2	InetAddress	read-create	The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IPt vRtrIfIpcpPeerAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.1	InetAddressType	read-create	The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0.
IP vRtrIfIpcpPriDnsAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.4	InetAddress	read-create	The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IPt vRtrIfIpcpPriDnsAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.3	InetAddressType	read-create	The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0.
IP vRtrIfIpcpSecDnsAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.6	InetAddress	read-create	The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IPt vRtrIfIpcpSecDnsAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.5	InetAddressType	read-create	The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0.
vRtrIfIpcpTable	1.3.6.1.4.1.6527.3.1.2.3.43		not-accessible	The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices.
T/F vRtrIfIPv6ConfigAllowed	1.3.6.1.4.1.6527.3.1.2.3.4.1.39	TruthValue	read-create	The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured.
TIP vRtrIfIPv6EgressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.42	TIPFilterID	read-create	The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIPv6IngressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.41	TIPFilterID	read-create	The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TMN vRtrIfIPv6OperState	1.3.6.1.4.1.6527.3.1.2.3.4.1.40	TmnxOperState	read-only	The current operational status for IPv6 on this router interface.
TIM vRtrIfLastOperStateChange	1.3.6.1.4.1.6527.3.1.2.3.4.1.61	TimeStamp	read-only	The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.
U32 vRtrIfLdpSyncTimer	1.3.6.1.4.1.6527.3.1.2.3.4.1.70	Unsigned32	read-create	The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.
IP vRtrIfLinkLocalAddress	1.3.6.1.4.1.6527.3.1.2.3.4.1.59	InetAddress	read-only	The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.
TMN vRtrIfLinkLocalAddressState	1.3.6.1.4.1.6527.3.1.2.3.4.1.60	TmnxInetAddrState	read-only	The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.
IPt vRtrIfLinkLocalAddressType	1.3.6.1.4.1.6527.3.1.2.3.4.1.58	InetAddressType	read-only	The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.
TNA vRtrIfLocalDhcpServerName	1.3.6.1.4.1.6527.3.1.2.3.4.1.66	TNamedItemOrEmpty	read-create	The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
TMN vRtrIfMplsStatus	1.3.6.1.4.1.6527.3.1.2.3.4.1.30	TmnxStatus	read-create	Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.
U32 vRtrIfMtu	1.3.6.1.4.1.6527.3.1.2.3.4.1.25	Unsigned32	read-create	The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.
TNA vRtrIfName	1.3.6.1.4.1.6527.3.1.2.3.4.1.4	TNamedItem	read-create	The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.
vRtrIfNameEntry	1.3.6.1.4.1.6527.3.1.2.3.5.1		not-accessible	Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
NUM vRtrIfNameIndex	1.3.6.1.4.1.6527.3.1.2.3.5.1.1	InterfaceIndex	read-only	The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.
vRtrIfNameTable	1.3.6.1.4.1.6527.3.1.2.3.5		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).
T/F vRtrIfNtpBroadcast	1.3.6.1.4.1.6527.3.1.2.3.4.1.23	TruthValue	read-create	When vRtrIfNtpBroadcast is set to 'true', the NTP broadcasts will be transmitted on this interface.
U32 vRtrIfOperMtu	1.3.6.1.4.1.6527.3.1.2.3.4.1.62	Unsigned32	read-only	The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.
TMN vRtrIfOperState	1.3.6.1.4.1.6527.3.1.2.3.4.1.9	TmnxOperState	read-only	The current operational status of this router interface.
MAC vRtrIfPhysicalAddress	1.3.6.1.4.1.6527.3.1.2.3.4.1.11	MacAddress	read-create	The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
TMN vRtrIfPortID	1.3.6.1.4.1.6527.3.1.2.3.4.1.5	TmnxPortID	read-create	The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.
BIT vRtrIfProtocol	1.3.6.1.4.1.6527.3.1.2.3.4.1.35	Bits	read-only	The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.
T/F vRtrIfProxyArp	1.3.6.1.4.1.6527.3.1.2.3.18.1.1	TruthValue	read-create	If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface.
vRtrIfProxyArpEntry	1.3.6.1.4.1.6527.3.1.2.3.18.1		not-accessible	Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
T/F vRtrIfProxyArpLocal	1.3.6.1.4.1.6527.3.1.2.3.18.1.2	TruthValue	read-create	If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet.
TPO vRtrIfProxyArpPolicy1	1.3.6.1.4.1.6527.3.1.2.3.18.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy2	1.3.6.1.4.1.6527.3.1.2.3.18.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy3	1.3.6.1.4.1.6527.3.1.2.3.18.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy4	1.3.6.1.4.1.6527.3.1.2.3.18.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy5	1.3.6.1.4.1.6527.3.1.2.3.18.1.7	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'.
vRtrIfProxyArpTable	1.3.6.1.4.1.6527.3.1.2.3.18		not-accessible	The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
vRtrIfProxyNDEntry	1.3.6.1.4.1.6527.3.1.2.3.38.1		not-accessible	Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
T/F vRtrIfProxyNDLocal	1.3.6.1.4.1.6527.3.1.2.3.38.1.1	TruthValue	read-create	If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet.
TPO vRtrIfProxyNDPolicy1	1.3.6.1.4.1.6527.3.1.2.3.38.1.2	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy2	1.3.6.1.4.1.6527.3.1.2.3.38.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy3	1.3.6.1.4.1.6527.3.1.2.3.38.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy4	1.3.6.1.4.1.6527.3.1.2.3.38.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy5	1.3.6.1.4.1.6527.3.1.2.3.38.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
vRtrIfProxyNDTable	1.3.6.1.4.1.6527.3.1.2.3.38		not-accessible	The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
TNE vRtrIfQosPolicyId	1.3.6.1.4.1.6527.3.1.2.3.4.1.26	TNetworkPolicyID	read-create	The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
ROW vRtrIfRowStatus	1.3.6.1.4.1.6527.3.1.2.3.4.1.2	RowStatus	read-create	The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.
TMN vRtrIfServiceId	1.3.6.1.4.1.6527.3.1.2.3.4.1.37	TmnxServId	read-create	The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.
vRtrIfTable	1.3.6.1.4.1.6527.3.1.2.3.4		not-accessible	The vRtrIfTable has an entry for each router interface configured in the system.
T/F vRtrIfTosMarkingTrusted	1.3.6.1.4.1.6527.3.1.2.3.4.1.36	TruthValue	read-create	The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, ALCATEL-IND1-TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.
INT vRtrIfTotalNumber	1.3.6.1.4.1.6527.3.1.2.3.3	INTEGER	read-only	The number of router interfaces configured in this system.
INT vRtrIfType	1.3.6.1.4.1.6527.3.1.2.3.4.1.3	INTEGER	read-create	The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror.
IP vRtrIfUnnumbered	1.3.6.1.4.1.6527.3.1.2.3.4.1.24	IpAddress	read-create	The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.
STR vRtrIfUnnumberedIf	1.3.6.1.4.1.6527.3.1.2.3.4.1.31	DisplayString	read-create	The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.
INT vRtrIfVPNClass	1.3.6.1.4.1.6527.3.1.2.3.4.1.33	INTEGER	read-only	The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface.
TMN vRtrIgmpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.31	TmnxStatus	read-create	The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.
T/F vRtrIgnoreIcmpRedirect	1.3.6.1.4.1.6527.3.1.2.3.1.1.40	TruthValue	read-create	If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
U32 vRtrIllegalLabelThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.22	Unsigned32	read-create	The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
TPO vRtrImportPolicy1	1.3.6.1.4.1.6527.3.1.2.3.16.1.1	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy2	1.3.6.1.4.1.6527.3.1.2.3.16.1.2	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy3	1.3.6.1.4.1.6527.3.1.2.3.16.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy4	1.3.6.1.4.1.6527.3.1.2.3.16.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy5	1.3.6.1.4.1.6527.3.1.2.3.16.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TMN vRtrInetAggrAggregatorAS	1.3.6.1.4.1.6527.3.1.2.3.27.1.8	TmnxBgpAutonomousSystem	read-create	The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
IP vRtrInetAggrAggregatorIPAddr	1.3.6.1.4.1.6527.3.1.2.3.27.1.9	IpAddress	read-create	The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
T/F vRtrInetAggrASSet	1.3.6.1.4.1.6527.3.1.2.3.27.1.7	TruthValue	read-create	The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR.
IP vRtrInetAggrIpPrefix	1.3.6.1.4.1.6527.3.1.2.3.27.1.2	InetAddress	not-accessible	The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation.
ADR vRtrInetAggrIpPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.27.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation.
IPt vRtrInetAggrIpPrefixType	1.3.6.1.4.1.6527.3.1.2.3.27.1.1	InetAddressType	not-accessible	The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix.
TIM vRtrInetAggrLastChanged	1.3.6.1.4.1.6527.3.1.2.3.27.1.5	TimeStamp	read-create	The value of vRtrInetAggrLastChanged specifies the time stamp of the last change to this row of vRtrInetInstAggrTable .
TMN vRtrInetAggrOperState	1.3.6.1.4.1.6527.3.1.2.3.27.1.10	TmnxOperState	read-only	The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry.
ROW vRtrInetAggrRowStatus	1.3.6.1.4.1.6527.3.1.2.3.27.1.4	RowStatus	read-create	vRtrInetAggrRowStatus controls the creation and deletion of rows in the table.
T/F vRtrInetAggrSummaryOnly	1.3.6.1.4.1.6527.3.1.2.3.27.1.6	TruthValue	read-create	The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised.
vRtrInetInstAggrEntry	1.3.6.1.4.1.6527.3.1.2.3.27.1		not-accessible	vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user.
vRtrInetInstAggrTable	1.3.6.1.4.1.6527.3.1.2.3.27		not-accessible	The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
TIM vRtrInetInstAggrTblLastChged	1.3.6.1.4.1.6527.3.1.2.3.26	TimeStamp	read-only	Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row.
TMN vRtrInetStaticRouteAdminState	1.3.6.1.4.1.6527.3.1.2.3.24.1.15	TmnxAdminState	read-create	The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route
TES vRtrInetStaticRouteAvailIndex	1.3.6.1.4.1.6527.3.1.2.3.25.1.1	TestAndIncr	read-only	The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
IP vRtrInetStaticRouteCpeAddr	1.3.6.1.4.1.6527.3.1.2.3.24.1.21	InetAddress	read-create	The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
IPt vRtrInetStaticRouteCpeAddrType	1.3.6.1.4.1.6527.3.1.2.3.24.1.20	InetAddressType	read-create	The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
U32 vRtrInetStaticRouteCpeDropCnt	1.3.6.1.4.1.6527.3.1.2.3.24.1.23	Unsigned32	read-create	The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated.
T/F vRtrInetStaticRouteCpeEnableLog	1.3.6.1.4.1.6527.3.1.2.3.24.1.24	TruthValue	read-create	The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled.
U32 vRtrInetStaticRouteCpeInterval	1.3.6.1.4.1.6527.3.1.2.3.24.1.22	Unsigned32	read-create	The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr.
INT vRtrInetStaticRouteCpeStatus	1.3.6.1.4.1.6527.3.1.2.3.21.32	INTEGER	accessible-for-notify	The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'.
IP vRtrInetStaticRouteDest	1.3.6.1.4.1.6527.3.1.2.3.24.1.2	InetAddress	not-accessible	The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route.
ADR vRtrInetStaticRouteDestPfxLen	1.3.6.1.4.1.6527.3.1.2.3.24.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address.
IPt vRtrInetStaticRouteDestType	1.3.6.1.4.1.6527.3.1.2.3.24.1.1	InetAddressType	not-accessible	The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address.
T/F vRtrInetStaticRouteDisallowIgp	1.3.6.1.4.1.6527.3.1.2.3.24.1.17	TruthValue	read-create	The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
NUM vRtrInetStaticRouteEgressIfIndex	1.3.6.1.4.1.6527.3.1.2.3.24.1.11	InterfaceIndexOrZero	read-only	The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
T/F vRtrInetStaticRouteEnableBfd	1.3.6.1.4.1.6527.3.1.2.3.24.1.19	TruthValue	read-create	The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD.
vRtrInetStaticRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.24.1		not-accessible	A particular route to a particular destination, through a particular next hop.
BIT vRtrInetStaticRouteIgpShortcut	1.3.6.1.4.1.6527.3.1.2.3.24.1.16	Bits	read-create	The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
INT vRtrInetStaticRouteIndex	1.3.6.1.4.1.6527.3.1.2.3.24.1.4	INTEGER	not-accessible	The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
vRtrInetStaticRouteIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.25.1		not-accessible	The available index for the vRtrInetStaticRouteTable for every destination per virtual router.
vRtrInetStaticRouteIndexTable	1.3.6.1.4.1.6527.3.1.2.3.25		not-accessible	This entity's Static Route Index Table.
TIM vRtrInetStaticRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.24.1.6	TimeStamp	read-only	The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
U32 vRtrInetStaticRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.24.1.10	Unsigned32	read-create	The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
IP vRtrInetStaticRouteNextHop	1.3.6.1.4.1.6527.3.1.2.3.24.1.13	InetAddress	read-create	The value of vRtrInetStaticRouteNextHop specifies the address of the next hop for the static route. In case of remote routes, the address of the next system en route. This member is complemented by vRtrInetStaticRouteNextHopIf. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
STR vRtrInetStaticRouteNextHopIf	1.3.6.1.4.1.6527.3.1.2.3.24.1.14	DisplayString	read-create	The value of vRtrInetStaticRouteNextHopIf specifies the interface of the next hop for the static route. The name of the Interface which will be the nexthop for this route. This member is complemented by vRtrInetStaticRouteNextHop. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
IPt vRtrInetStaticRouteNextHopType	1.3.6.1.4.1.6527.3.1.2.3.24.1.12	InetAddressType	read-create	The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address.
U32 vRtrInetStaticRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.24.1.9	Unsigned32	read-create	The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
ROW vRtrInetStaticRouteRowStatus	1.3.6.1.4.1.6527.3.1.2.3.24.1.5	RowStatus	read-create	vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table.
INT vRtrInetStaticRouteStaticType	1.3.6.1.4.1.6527.3.1.2.3.24.1.8	INTEGER	read-create	The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry.
INT vRtrInetStaticRouteStatus	1.3.6.1.4.1.6527.3.1.2.3.24.1.7	INTEGER	read-only	The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
vRtrInetStaticRouteTable	1.3.6.1.4.1.6527.3.1.2.3.24		not-accessible	The table of addressing information relevant to this entity's Static Routing table.
U32 vRtrInetStaticRouteTag	1.3.6.1.4.1.6527.3.1.2.3.24.1.18	Unsigned32	read-create	The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
G32 vRtrInetStatRteCpeChkDownTrans	1.3.6.1.4.1.6527.3.1.2.3.44.1.4	Gauge32	read-only	The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state.
C32 vRtrInetStatRteCpeChkInPktCnt	1.3.6.1.4.1.6527.3.1.2.3.44.1.2	Counter32	read-only	The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received.
C32 vRtrInetStatRteCpeChkOutPktCnt	1.3.6.1.4.1.6527.3.1.2.3.44.1.3	Counter32	read-only	The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent.
vRtrInetStatRteCpeChkStatsEntry	1.3.6.1.4.1.6527.3.1.2.3.44.1		not-accessible	Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations.
vRtrInetStatRteCpeChkStatsTable	1.3.6.1.4.1.6527.3.1.2.3.44		not-accessible	The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects.
U32 vRtrInetStatRteCpeChkTTL	1.3.6.1.4.1.6527.3.1.2.3.44.1.6	Unsigned32	read-only	The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second.
TIK vRtrInetStatRteCpeChkUpTime	1.3.6.1.4.1.6527.3.1.2.3.44.1.1	TimeTicks	read-only	The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available.
G32 vRtrInetStatRteCpeChkUpTrans	1.3.6.1.4.1.6527.3.1.2.3.44.1.5	Gauge32	read-only	The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state.
IP vRtrInetStatRteCpeNotifyAddr	1.3.6.1.4.1.6527.3.1.2.3.21.31	InetAddress	accessible-for-notify	The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE.
IPt vRtrInetStatRteCpeNotifyAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.30	InetAddressType	accessible-for-notify	The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr.
IP vRtrInetSvcIpRangeAddr	1.3.6.1.4.1.6527.3.1.2.3.28.1.2	InetAddress	not-accessible	The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType.
IPt vRtrInetSvcIpRangeAddrType	1.3.6.1.4.1.6527.3.1.2.3.28.1.1	InetAddressType	not-accessible	The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr.
vRtrInetSvcIpRangeEntry	1.3.6.1.4.1.6527.3.1.2.3.28.1		not-accessible	Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
T/F vRtrInetSvcIpRangeExclusive	1.3.6.1.4.1.6527.3.1.2.3.28.1.5	TruthValue	read-create	The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports.
ADR vRtrInetSvcIpRangePfxLen	1.3.6.1.4.1.6527.3.1.2.3.28.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range.
ROW vRtrInetSvcIpRangeRowStatus	1.3.6.1.4.1.6527.3.1.2.3.28.1.4	RowStatus	read-create	The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges.
vRtrInetSvcIpRangeTable	1.3.6.1.4.1.6527.3.1.2.3.28		not-accessible	The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it.
vRtrInstanceAggregationEntry	1.3.6.1.4.1.6527.3.1.2.3.13.1		not-accessible	An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user.
vRtrInstanceAggregationTable	1.3.6.1.4.1.6527.3.1.2.3.13		not-accessible	The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
TIM vRtrInstanceAggregationTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.12	TimeStamp	read-only	Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row.
vRtrIpAddrEntry	1.3.6.1.4.1.6527.3.1.2.3.6.1		not-accessible	Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.
vRtrIpAddrTable	1.3.6.1.4.1.6527.3.1.2.3.6		not-accessible	The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.
vRtrIpCidrRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.7.1		not-accessible	Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the IP route table.
TIM vRtrIpCidrRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.7.1.1	TimeStamp	read-only	The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.
U32 vRtrIpCidrRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.7.1.3	Unsigned32	read-only	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
U32 vRtrIpCidrRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.7.1.2	Unsigned32	read-create	When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
vRtrIpCidrRouteTable	1.3.6.1.4.1.6527.3.1.2.3.7		not-accessible	The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB.
vRtrIpNetToMediaEntry	1.3.6.1.4.1.6527.3.1.2.3.11.1		not-accessible	Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the vRtrIpNetToMediaTable.
TMN vRtrIpNetToMediaOperState	1.3.6.1.4.1.6527.3.1.2.3.11.1.2	TmnxOperState	read-only	The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'.
vRtrIpNetToMediaTable	1.3.6.1.4.1.6527.3.1.2.3.11		not-accessible	The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB.
U32 vRtrIpNetToMediaTimer	1.3.6.1.4.1.6527.3.1.2.3.11.1.1	Unsigned32	read-only	The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache.
U32 vRtrIPv6HighRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.48	Unsigned32	read-only	The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
T/F vRtrIPv6IgnoreIcmpRedirect	1.3.6.1.4.1.6527.3.1.2.3.1.1.50	TruthValue	read-create	If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
I32 vRtrIPv6MaxNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.46	Integer32	read-create	The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
T/F vRtrIPv6MaxNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.49	TruthValue	read-create	The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
U32 vRtrIPv6MidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.47	Unsigned32	read-create	The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIPv6RouteThresholdSoakTime	1.3.6.1.4.1.6527.3.1.2.3.15.6	Unsigned32	read-write	The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.
G32 vRtrISISActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.11	Gauge32	read-only	vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.
G32 vRtrISISRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.10	Gauge32	read-only	vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.
TMN vRtrIsIsStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.15	TmnxStatus	read-create	The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.
TMN vRtrLdpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.14	TmnxStatus	read-create	The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.
G32 vRtrManagedActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.72	Gauge32	read-only	The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.
IP vRtrManagedRouteInetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.34	InetAddress	accessible-for-notify	The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route.
IPt vRtrManagedRouteInetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.33	InetAddressType	accessible-for-notify	The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr.
ADR vRtrManagedRoutePrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.35	InetAddressPrefixLength	accessible-for-notify	The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr.
G32 vRtrManagedRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.71	Gauge32	read-only	The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.
U32 vRtrMaxARPEntries	1.3.6.1.4.1.6527.3.1.2.3.15.5	Unsigned32	read-only	vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.
I32 vRtrMaxMcastNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.37	Integer32	read-create	The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.
T/F vRtrMaxMcastNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.38	TruthValue	read-create	The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
I32 vRtrMaxNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.5	Integer32	read-create	The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.
T/F vRtrMaxNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.32	TruthValue	read-create	The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
U32 vRtrMcastMidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.39	Unsigned32	read-create	The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
TNA vRtrMcPathMgmtPlcyName	1.3.6.1.4.1.6527.3.1.2.3.1.1.51	TNamedItem	read-create	The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.
U32 vRtrMidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.20	Unsigned32	read-create	The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
TMN vRtrMldStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.45	TmnxStatus	read-create	The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.
TMN vRtrMplsStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.7	TmnxStatus	read-create	The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.
TMN vRtrMsdpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.42	TmnxStatus	read-create	The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.
G32 vRtrMulticastRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.26	Gauge32	read-only	vRtrMulticastRoutes indicates the current number of rows in the vRtrPimGrpSrcTable.
TNA vRtrName	1.3.6.1.4.1.6527.3.1.2.3.1.1.4	TNamedItemOrEmpty	read-create	The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. When a row is created in the vRtrConfTable for a service vprn, the agent assigns the name 'VR-'. Note that for row creation to succeed, a value must be specified for vRtrName.
TES vRtrNewIfIndex	1.3.6.1.4.1.6527.3.1.2.3.1.1.13	TestAndIncr	read-create	This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
TES vRtrNextVRtrID	1.3.6.1.4.1.6527.3.1.2.3.15.1	TestAndIncr	read-create	The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
U32 vRtrNumberOfBfdSessionsOnSlot	1.3.6.1.4.1.6527.3.1.2.3.21.15	Unsigned32	accessible-for-notify	The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
TMN vRtrOperState	1.3.6.1.4.1.6527.3.1.2.3.2.1.1	TmnxOperState	read-only	vRtrOperState indicates current operational status of this virtual router.
G32 vRtrOSPFActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.7	Gauge32	read-only	vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.
G32 vRtrOSPFRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.6	Gauge32	read-only	vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.
TMN vRtrOspfStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.8	TmnxStatus	read-create	The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrOspfv3Status	1.3.6.1.4.1.6527.3.1.2.3.1.1.41	TmnxStatus	read-create	The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrPimStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.36	TmnxStatus	read-create	The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.
vRtrPolicyEntry	1.3.6.1.4.1.6527.3.1.2.3.16.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrPolicyTable	1.3.6.1.4.1.6527.3.1.2.3.16		not-accessible	The vRtrPolicyTable has an entry for each virtual router configured in the system.
G32 vRtrRIPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.13	Gauge32	read-only	vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.
G32 vRtrRIPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.12	Gauge32	read-only	vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.
TMN vRtrRipStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.9	TmnxStatus	read-create	The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.
TMN vRtrRouteDistinguisher	1.3.6.1.4.1.6527.3.1.2.3.1.1.19	TmnxVPNRouteDistinguisher	read-create	The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned.
IP vRtrRouterId	1.3.6.1.4.1.6527.3.1.2.3.1.1.16	IpAddress	read-create	A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
U32 vRtrRouteThresholdSoakTime	1.3.6.1.4.1.6527.3.1.2.3.15.4	Unsigned32	read-write	Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.
ROW vRtrRowStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.2	RowStatus	read-create	The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.
TMN vRtrRsvpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.10	TmnxStatus	read-create	The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.
TMN vRtrSecondaryVrfId	1.3.6.1.4.1.6527.3.1.2.3.1.1.44	TmnxVRtrIDOrZero	read-only	The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system.
TMN vRtrServiceId	1.3.6.1.4.1.6527.3.1.2.3.1.1.29	TmnxServId	read-only	When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.
G32 vRtrStatActiveARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.27	Gauge32	read-only	vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.
G32 vRtrStatActiveIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.17	Gauge32	read-only	vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
G32 vRtrStatActiveLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.24	Gauge32	read-only	vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrStatActiveRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.59	Gauge32	read-only	The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrStatActiveSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.25	Gauge32	read-only	vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrStatBGPVpnActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.21	Gauge32	read-only	vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatBGPVpnRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.20	Gauge32	read-only	vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatConfiguredIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.16	Gauge32	read-only	vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.
G32 vRtrStatCurrNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.19	Gauge32	read-only	vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.
G32 vRtrStatDynamicARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.68	Gauge32	read-only	The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.
vRtrStatEntry	1.3.6.1.4.1.6527.3.1.2.3.2.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
G32 vRtrStaticActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.5	Gauge32	read-only	vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.
TMN vRtrStaticRouteAdminState	1.3.6.1.4.1.6527.3.1.2.3.9.1.14	TmnxAdminState	read-create	The desired administrative state for this virtual router static route
TES vRtrStaticRouteAvailableIndex	1.3.6.1.4.1.6527.3.1.2.3.14.1.3	TestAndIncr	read-only	The available quaternary index for the vRtrStaticRouteTable.
IP vRtrStaticRouteDest	1.3.6.1.4.1.6527.3.1.2.3.9.1.1	IpAddress	read-only	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
T/F vRtrStaticRouteDisallowIgp	1.3.6.1.4.1.6527.3.1.2.3.9.1.16	TruthValue	read-create	The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
NUM vRtrStaticRouteEgressIfIndex	1.3.6.1.4.1.6527.3.1.2.3.9.1.11	InterfaceIndexOrZero	read-only	The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
vRtrStaticRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.9.1		not-accessible	A particular route to a particular destination, through a particular next hop.
BIT vRtrStaticRouteIgpShortcut	1.3.6.1.4.1.6527.3.1.2.3.9.1.15	Bits	read-create	The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
INT vRtrStaticRouteIndex	1.3.6.1.4.1.6527.3.1.2.3.9.1.3	INTEGER	read-only	The quaternary index for the vRtrStaticRouteTable.
IP vRtrStaticRouteIndexDest	1.3.6.1.4.1.6527.3.1.2.3.14.1.1	IpAddress	read-only	The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
vRtrStaticRouteIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.14.1		not-accessible	The available index for the vRtrStaticRouteTable for every destination per virtual router.
IP vRtrStaticRouteIndexMask	1.3.6.1.4.1.6527.3.1.2.3.14.1.2	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
vRtrStaticRouteIndexTable	1.3.6.1.4.1.6527.3.1.2.3.14		not-accessible	This entity's Static Route Index Table.
TIM vRtrStaticRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.9.1.5	TimeStamp	read-only	The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
IP vRtrStaticRouteMask	1.3.6.1.4.1.6527.3.1.2.3.9.1.2	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
U32 vRtrStaticRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.9.1.9	Unsigned32	read-create	When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
IP vRtrStaticRouteNextHop	1.3.6.1.4.1.6527.3.1.2.3.9.1.12	IpAddress	read-create	In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
STR vRtrStaticRouteNextHopUnnumberedIf	1.3.6.1.4.1.6527.3.1.2.3.9.1.13	DisplayString	read-create	The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
U32 vRtrStaticRouteNumber	1.3.6.1.4.1.6527.3.1.2.3.8	Unsigned32	read-only	The number of current vRtrStaticRouteTable entries that are 'active'.
U32 vRtrStaticRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.9.1.8	Unsigned32	read-create	The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
ROW vRtrStaticRouteRowStatus	1.3.6.1.4.1.6527.3.1.2.3.9.1.4	RowStatus	read-create	The row status variable, used according to row installation and removal conventions.
G32 vRtrStaticRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.4	Gauge32	read-only	vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.
INT vRtrStaticRouteStaticType	1.3.6.1.4.1.6527.3.1.2.3.9.1.7	INTEGER	read-create	The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry.
INT vRtrStaticRouteStatus	1.3.6.1.4.1.6527.3.1.2.3.9.1.6	INTEGER	read-only	The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
vRtrStaticRouteTable	1.3.6.1.4.1.6527.3.1.2.3.9		not-accessible	This entity's Static Routing table.
U32 vRtrStaticRouteTag	1.3.6.1.4.1.6527.3.1.2.3.9.1.17	Unsigned32	read-create	The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
C32 vRtrStatIllegalLabels	1.3.6.1.4.1.6527.3.1.2.3.2.1.18	Counter32	read-only	vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.
G32 vRtrStatInternalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.70	Gauge32	read-only	The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.
G32 vRtrStatLocalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.66	Gauge32	read-only	The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.
G32 vRtrStatManagedARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.69	Gauge32	read-only	The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.
G32 vRtrStatStaticARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.67	Gauge32	read-only	The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.
vRtrStatTable	1.3.6.1.4.1.6527.3.1.2.3.2		not-accessible	The vRtrStatTable has an entry for each virtual router configured in the system.
G32 vRtrStatTotalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.28	Gauge32	read-only	vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.
G32 vRtrStatTotalLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.22	Gauge32	read-only	vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.
G32 vRtrStatTotalRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.58	Gauge32	read-only	The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.
G32 vRtrStatTotalSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.23	Gauge32	read-only	vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.
G32 vRtrSubMgmtActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.57	Gauge32	read-only	The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.
G32 vRtrSubMgmtRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.56	Gauge32	read-only	The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.
IP vRtrSvcIpRangeAddress	1.3.6.1.4.1.6527.3.1.2.3.10.1.1	IpAddress	not-accessible	The IP address prefix range assigned to a router's service interface.
vRtrSvcIpRangeEntry	1.3.6.1.4.1.6527.3.1.2.3.10.1		not-accessible	Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
T/F vRtrSvcIpRangeExclusive	1.3.6.1.4.1.6527.3.1.2.3.10.1.4	TruthValue	read-create	When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports.
U32 vRtrSvcIpRangeMask	1.3.6.1.4.1.6527.3.1.2.3.10.1.2	Unsigned32	not-accessible	The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0.
ROW vRtrSvcIpRangeRowStatus	1.3.6.1.4.1.6527.3.1.2.3.10.1.3	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries.
vRtrSvcIpRangeTable	1.3.6.1.4.1.6527.3.1.2.3.10		not-accessible	The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it.
T/F vRtrTriggeredPolicy	1.3.6.1.4.1.6527.3.1.2.3.1.1.17	TruthValue	read-create	If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.
I32 vRtrTunnelAge	1.3.6.1.4.1.6527.3.1.2.3.17.1.8	Integer32	read-only	The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel.
IP vRtrTunnelDest	1.3.6.1.4.1.6527.3.1.2.3.17.1.1	IpAddress	not-accessible	vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x.
vRtrTunnelEntry	1.3.6.1.4.1.6527.3.1.2.3.17.1		not-accessible	vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP.
TMN vRtrTunnelID	1.3.6.1.4.1.6527.3.1.2.3.17.1.5	TmnxTunnelID	not-accessible	Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types.
IP vRtrTunnelMask	1.3.6.1.4.1.6527.3.1.2.3.17.1.2	IpAddress	not-accessible	vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
U32 vRtrTunnelMetric	1.3.6.1.4.1.6527.3.1.2.3.17.1.7	Unsigned32	read-only	vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel.
IP vRtrTunnelNexthop	1.3.6.1.4.1.6527.3.1.2.3.17.1.6	IpAddress	not-accessible	The address of the next system en route; Otherwise, 0.0.0.0.
U32 vRtrTunnelPreference	1.3.6.1.4.1.6527.3.1.2.3.17.1.3	Unsigned32	not-accessible	The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table.
vRtrTunnelTable	1.3.6.1.4.1.6527.3.1.2.3.17		not-accessible	vRtrTunnelTable maintains a list of tunnels for the specific router instance.
TMN vRtrTunnelType	1.3.6.1.4.1.6527.3.1.2.3.17.1.4	TmnxTunnelType	not-accessible	The type of this tunnel entity.
INT vRtrType	1.3.6.1.4.1.6527.3.1.2.3.1.1.28	INTEGER	read-create	The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.
G32 vRtrV6AggregateActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.42	Gauge32	read-only	vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.
G32 vRtrV6AggregateRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.41	Gauge32	read-only	vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.
G32 vRtrV6BGPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.36	Gauge32	read-only	vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.
G32 vRtrV6BGPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.35	Gauge32	read-only	vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.
G32 vRtrV6DirectActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.30	Gauge32	read-only	vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.
G32 vRtrV6DirectRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.29	Gauge32	read-only	vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.
G32 vRtrV6HostActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.65	Gauge32	read-only	The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6HostRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.64	Gauge32	read-only	The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6ISISActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.38	Gauge32	read-only	vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.
G32 vRtrV6ISISRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.37	Gauge32	read-only	vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.
G32 vRtrV6MulticastRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.53	Gauge32	read-only	vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimGrpSrcTable.
G32 vRtrV6OSPFActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.34	Gauge32	read-only	vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.
G32 vRtrV6OSPFRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.33	Gauge32	read-only	vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.
G32 vRtrV6RIPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.40	Gauge32	read-only	vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.
G32 vRtrV6RIPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.39	Gauge32	read-only	vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.
G32 vRtrV6StatActiveIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.44	Gauge32	read-only	vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
G32 vRtrV6StatActiveLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.51	Gauge32	read-only	vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrV6StatActiveNbrEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.54	Gauge32	read-only	vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatActiveRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.61	Gauge32	read-only	The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrV6StatActiveSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.52	Gauge32	read-only	vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrV6StatBGPVpnActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.48	Gauge32	read-only	vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatBGPVpnRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.47	Gauge32	read-only	vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatConfiguredIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.43	Gauge32	read-only	vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.
G32 vRtrV6StatCurrNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.46	Gauge32	read-only	vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.
G32 vRtrV6StaticActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.32	Gauge32	read-only	vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.
G32 vRtrV6StaticRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.31	Gauge32	read-only	vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.
C32 vRtrV6StatIllegalLabels	1.3.6.1.4.1.6527.3.1.2.3.2.1.45	Counter32	read-only	vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.
G32 vRtrV6StatTotalLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.49	Gauge32	read-only	vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.
G32 vRtrV6StatTotalNbrEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.55	Gauge32	read-only	vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatTotalRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.60	Gauge32	read-only	The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.
G32 vRtrV6StatTotalSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.50	Gauge32	read-only	vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.
TMN vRtrVpnId	1.3.6.1.4.1.6527.3.1.2.3.1.1.23	TmnxVPNId	read-create	The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.
INT vRtrVprnType	1.3.6.1.4.1.6527.3.1.2.3.1.1.43	INTEGER	read-create	The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.
TNA vRtrVrfExportTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.34	TNamedItemOrEmpty	read-create	The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfImportTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.35	TNamedItemOrEmpty	read-create	The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.33	TNamedItemOrEmpty	read-create	The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.

OID symbolic	OID numeric	Type	Access	Description
timetraVRtrMIBModule	1.3.6.1.4.1.6527.1.1.3.3			This document is the SNMP MIB module to manage and provision the Alcatel 7x50 device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxVRtrConformance	1.3.6.1.4.1.6527.3.1.1.3
tmnxVRtrCompliances	1.3.6.1.4.1.6527.3.1.1.3.1
tmnxVRtr7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.4			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R4.0.
tmnxVRtr7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.5			The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R4.0.
tmnxVRtr7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.6			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R5.0.
tmnxVRtr7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.7			The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R5.0.
tmnxVRtr7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.8			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R6.0.
tmnxVRtr77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.9			The compliance statement for management of VRTR instances on Alcatel 7x50 SR series systems release R6.0.
tmnxVRtrGroups	1.3.6.1.4.1.6527.3.1.1.3.2
tmnxVRtrGlobalR2r1Group	1.3.6.1.4.1.6527.3.1.1.3.2.10			The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel 7x50 SR series systems.
tmnxVRtrIfSubscrAuthV3v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.11			The group of objects supporting management of DHCP authentication on version 3.0 Alcatel 7x50 SR series systems.
tmnxVRtrV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.14			The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.15			The group of objects supporting management of virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIpV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.16			The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrObsoletedObjectsV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.17			The group of objects no longer supported in version 4.0 of Alcatel 7x50 SR series systems.
tmnxVRtrBfdV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.18			The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems.
tmnxVRtrNotificationV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.19			The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IfV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.20			The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6V4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.21			The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IpV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.22			The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrObsoleteNotificationGroup	1.3.6.1.4.1.6527.3.1.1.3.2.23			The group of obsolete notifications for the transport and virtual router capabilities on Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IpV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.24			The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.25			The group of objects supporting management of virtual interfaces on version 5.0 Alcatel 7x50 SR series systems.
tmnxVRtrIpV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.26			The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.27			The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
tmnxVRtrNotificationV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.28			The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems.
tmnxVRtrObsoleteV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.29			The group of objects in ALCATEL-IND1-TIMETRA-VRTR-MIB which are obsoleted in Alcatel 7x50 SR 5.0 series systems.
tmnxVRtrNotificationObjV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.30			The group of objects supporting management of notification objects on Alcatel 7x50 SR 5.0 series systems.
tmnxVRtrIfDhcpServerGroup	1.3.6.1.4.1.6527.3.1.1.3.2.31			The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.32			The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrStaticRteCPEChkV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.33			The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfIpcpV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.34			The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
tmnxVRtrIfCpmProtectGroup	1.3.6.1.4.1.6527.3.1.1.3.2.35			The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel 7xxx series systems.
tmnxDscpAppV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.36			The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel 7x50 SR series systems release 6.0.
tmnxVRtrIfDHCPRelayGroup	1.3.6.1.4.1.6527.3.1.1.3.2.37			The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
tmnxVRtrGlobalV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.38			The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrNotificationObjV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.39			The group of objects supporting management of notification objects on Alcatel 7x50 SR 6.0 series systems.
tmnxVRtrNotificationV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.40			The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel 7xx0 SR series systems.
tmnxVRtrBfdV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.41			The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel 7xxx series systems.
tmnxVRtrObjs	1.3.6.1.4.1.6527.3.1.2.3
vRtrConfTable	1.3.6.1.4.1.6527.3.1.2.3.1		not-accessible	The vRtrConfTable has an entry for each virtual router configured in the system.
vRtrConfEntry	1.3.6.1.4.1.6527.3.1.2.3.1.1		not-accessible	Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the ALCATEL-IND1-TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.
TMN vRtrID	1.3.6.1.4.1.6527.3.1.2.3.1.1.1	TmnxVRtrID	accessible-for-notify	The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.
ROW vRtrRowStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.2	RowStatus	read-create	The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.
TMN vRtrAdminState	1.3.6.1.4.1.6527.3.1.2.3.1.1.3	TmnxAdminState	read-create	The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.
TNA vRtrName	1.3.6.1.4.1.6527.3.1.2.3.1.1.4	TNamedItemOrEmpty	read-create	The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. When a row is created in the vRtrConfTable for a service vprn, the agent assigns the name 'VR-'. Note that for row creation to succeed, a value must be specified for vRtrName.
I32 vRtrMaxNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.5	Integer32	read-create	The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.
TMN vRtrBgpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.6	TmnxStatus	read-create	The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.
TMN vRtrMplsStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.7	TmnxStatus	read-create	The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.
TMN vRtrOspfStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.8	TmnxStatus	read-create	The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrRipStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.9	TmnxStatus	read-create	The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.
TMN vRtrRsvpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.10	TmnxStatus	read-create	The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.
U32 vRtrEcmpMaxRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.11	Unsigned32	read-create	The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.
TMN vRtrAS	1.3.6.1.4.1.6527.3.1.2.3.1.1.12	TmnxBgpAutonomousSystem	read-create	The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated.
TES vRtrNewIfIndex	1.3.6.1.4.1.6527.3.1.2.3.1.1.13	TestAndIncr	read-create	This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
TMN vRtrLdpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.14	TmnxStatus	read-create	The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.
TMN vRtrIsIsStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.15	TmnxStatus	read-create	The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.
IP vRtrRouterId	1.3.6.1.4.1.6527.3.1.2.3.1.1.16	IpAddress	read-create	A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
T/F vRtrTriggeredPolicy	1.3.6.1.4.1.6527.3.1.2.3.1.1.17	TruthValue	read-create	If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.
TMN vRtrConfederationAS	1.3.6.1.4.1.6527.3.1.2.3.1.1.18	TmnxBgpAutonomousSystem	read-create	The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.
TMN vRtrRouteDistinguisher	1.3.6.1.4.1.6527.3.1.2.3.1.1.19	TmnxVPNRouteDistinguisher	read-create	The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned.
U32 vRtrMidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.20	Unsigned32	read-create	The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrHighRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.21	Unsigned32	read-only	The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIllegalLabelThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.22	Unsigned32	read-create	The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
TMN vRtrVpnId	1.3.6.1.4.1.6527.3.1.2.3.1.1.23	TmnxVPNId	read-create	The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.
TIT vRtrDescription	1.3.6.1.4.1.6527.3.1.2.3.1.1.25	TItemDescription	read-create	The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
T/F vRtrGracefulRestart	1.3.6.1.4.1.6527.3.1.2.3.1.1.26	TruthValue	read-create	The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.
INT vRtrGracefulRestartType	1.3.6.1.4.1.6527.3.1.2.3.1.1.27	INTEGER	read-create	The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover
INT vRtrType	1.3.6.1.4.1.6527.3.1.2.3.1.1.28	INTEGER	read-create	The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.
TMN vRtrServiceId	1.3.6.1.4.1.6527.3.1.2.3.1.1.29	TmnxServId	read-only	When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.
TMN vRtrCustId	1.3.6.1.4.1.6527.3.1.2.3.1.1.30	TmnxCustId	read-only	When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.
TMN vRtrIgmpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.31	TmnxStatus	read-create	The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.
T/F vRtrMaxNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.32	TruthValue	read-create	The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
TNA vRtrVrfTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.33	TNamedItemOrEmpty	read-create	The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.
TNA vRtrVrfExportTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.34	TNamedItemOrEmpty	read-create	The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfImportTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.35	TNamedItemOrEmpty	read-create	The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TMN vRtrPimStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.36	TmnxStatus	read-create	The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.
I32 vRtrMaxMcastNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.37	Integer32	read-create	The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.
T/F vRtrMaxMcastNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.38	TruthValue	read-create	The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
U32 vRtrMcastMidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.39	Unsigned32	read-create	The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
T/F vRtrIgnoreIcmpRedirect	1.3.6.1.4.1.6527.3.1.2.3.1.1.40	TruthValue	read-create	If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
TMN vRtrOspfv3Status	1.3.6.1.4.1.6527.3.1.2.3.1.1.41	TmnxStatus	read-create	The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrMsdpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.42	TmnxStatus	read-create	The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.
INT vRtrVprnType	1.3.6.1.4.1.6527.3.1.2.3.1.1.43	INTEGER	read-create	The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.
TMN vRtrSecondaryVrfId	1.3.6.1.4.1.6527.3.1.2.3.1.1.44	TmnxVRtrIDOrZero	read-only	The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system.
TMN vRtrMldStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.45	TmnxStatus	read-create	The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.
I32 vRtrIPv6MaxNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.46	Integer32	read-create	The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
U32 vRtrIPv6MidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.47	Unsigned32	read-create	The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIPv6HighRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.48	Unsigned32	read-only	The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
T/F vRtrIPv6MaxNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.49	TruthValue	read-create	The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
T/F vRtrIPv6IgnoreIcmpRedirect	1.3.6.1.4.1.6527.3.1.2.3.1.1.50	TruthValue	read-create	If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
TNA vRtrMcPathMgmtPlcyName	1.3.6.1.4.1.6527.3.1.2.3.1.1.51	TNamedItem	read-create	The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.
vRtrStatTable	1.3.6.1.4.1.6527.3.1.2.3.2		not-accessible	The vRtrStatTable has an entry for each virtual router configured in the system.
vRtrStatEntry	1.3.6.1.4.1.6527.3.1.2.3.2.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
TMN vRtrOperState	1.3.6.1.4.1.6527.3.1.2.3.2.1.1	TmnxOperState	read-only	vRtrOperState indicates current operational status of this virtual router.
G32 vRtrDirectRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.2	Gauge32	read-only	vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.
G32 vRtrDirectActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.3	Gauge32	read-only	vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.
G32 vRtrStaticRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.4	Gauge32	read-only	vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.
G32 vRtrStaticActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.5	Gauge32	read-only	vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.
G32 vRtrOSPFRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.6	Gauge32	read-only	vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.
G32 vRtrOSPFActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.7	Gauge32	read-only	vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.
G32 vRtrBGPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.8	Gauge32	read-only	vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.
G32 vRtrBGPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.9	Gauge32	read-only	vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.
G32 vRtrISISRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.10	Gauge32	read-only	vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.
G32 vRtrISISActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.11	Gauge32	read-only	vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.
G32 vRtrRIPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.12	Gauge32	read-only	vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.
G32 vRtrRIPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.13	Gauge32	read-only	vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.
G32 vRtrAggregateRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.14	Gauge32	read-only	vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.
G32 vRtrAggregateActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.15	Gauge32	read-only	vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.
G32 vRtrStatConfiguredIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.16	Gauge32	read-only	vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.
G32 vRtrStatActiveIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.17	Gauge32	read-only	vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
C32 vRtrStatIllegalLabels	1.3.6.1.4.1.6527.3.1.2.3.2.1.18	Counter32	read-only	vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.
G32 vRtrStatCurrNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.19	Gauge32	read-only	vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.
G32 vRtrStatBGPVpnRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.20	Gauge32	read-only	vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatBGPVpnActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.21	Gauge32	read-only	vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatTotalLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.22	Gauge32	read-only	vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.
G32 vRtrStatTotalSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.23	Gauge32	read-only	vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.
G32 vRtrStatActiveLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.24	Gauge32	read-only	vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrStatActiveSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.25	Gauge32	read-only	vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrMulticastRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.26	Gauge32	read-only	vRtrMulticastRoutes indicates the current number of rows in the vRtrPimGrpSrcTable.
G32 vRtrStatActiveARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.27	Gauge32	read-only	vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.
G32 vRtrStatTotalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.28	Gauge32	read-only	vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.
G32 vRtrV6DirectRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.29	Gauge32	read-only	vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.
G32 vRtrV6DirectActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.30	Gauge32	read-only	vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.
G32 vRtrV6StaticRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.31	Gauge32	read-only	vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.
G32 vRtrV6StaticActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.32	Gauge32	read-only	vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.
G32 vRtrV6OSPFRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.33	Gauge32	read-only	vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.
G32 vRtrV6OSPFActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.34	Gauge32	read-only	vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.
G32 vRtrV6BGPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.35	Gauge32	read-only	vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.
G32 vRtrV6BGPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.36	Gauge32	read-only	vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.
G32 vRtrV6ISISRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.37	Gauge32	read-only	vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.
G32 vRtrV6ISISActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.38	Gauge32	read-only	vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.
G32 vRtrV6RIPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.39	Gauge32	read-only	vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.
G32 vRtrV6RIPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.40	Gauge32	read-only	vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.
G32 vRtrV6AggregateRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.41	Gauge32	read-only	vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.
G32 vRtrV6AggregateActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.42	Gauge32	read-only	vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.
G32 vRtrV6StatConfiguredIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.43	Gauge32	read-only	vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.
G32 vRtrV6StatActiveIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.44	Gauge32	read-only	vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
C32 vRtrV6StatIllegalLabels	1.3.6.1.4.1.6527.3.1.2.3.2.1.45	Counter32	read-only	vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.
G32 vRtrV6StatCurrNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.46	Gauge32	read-only	vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.
G32 vRtrV6StatBGPVpnRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.47	Gauge32	read-only	vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatBGPVpnActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.48	Gauge32	read-only	vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatTotalLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.49	Gauge32	read-only	vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.
G32 vRtrV6StatTotalSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.50	Gauge32	read-only	vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.
G32 vRtrV6StatActiveLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.51	Gauge32	read-only	vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrV6StatActiveSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.52	Gauge32	read-only	vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrV6MulticastRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.53	Gauge32	read-only	vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimGrpSrcTable.
G32 vRtrV6StatActiveNbrEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.54	Gauge32	read-only	vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatTotalNbrEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.55	Gauge32	read-only	vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrSubMgmtRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.56	Gauge32	read-only	The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.
G32 vRtrSubMgmtActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.57	Gauge32	read-only	The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.
G32 vRtrStatTotalRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.58	Gauge32	read-only	The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.
G32 vRtrStatActiveRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.59	Gauge32	read-only	The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrV6StatTotalRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.60	Gauge32	read-only	The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.
G32 vRtrV6StatActiveRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.61	Gauge32	read-only	The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrHostRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.62	Gauge32	read-only	The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.
G32 vRtrHostActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.63	Gauge32	read-only	The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.
G32 vRtrV6HostRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.64	Gauge32	read-only	The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6HostActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.65	Gauge32	read-only	The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.
G32 vRtrStatLocalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.66	Gauge32	read-only	The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.
G32 vRtrStatStaticARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.67	Gauge32	read-only	The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.
G32 vRtrStatDynamicARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.68	Gauge32	read-only	The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.
G32 vRtrStatManagedARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.69	Gauge32	read-only	The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.
G32 vRtrStatInternalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.70	Gauge32	read-only	The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.
G32 vRtrManagedRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.71	Gauge32	read-only	The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.
G32 vRtrManagedActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.72	Gauge32	read-only	The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.
INT vRtrIfTotalNumber	1.3.6.1.4.1.6527.3.1.2.3.3	INTEGER	read-only	The number of router interfaces configured in this system.
vRtrIfTable	1.3.6.1.4.1.6527.3.1.2.3.4		not-accessible	The vRtrIfTable has an entry for each router interface configured in the system.
vRtrIfEntry	1.3.6.1.4.1.6527.3.1.2.3.4.1		not-accessible	Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
NUM vRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.4.1.1	InterfaceIndex	accessible-for-notify	The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
ROW vRtrIfRowStatus	1.3.6.1.4.1.6527.3.1.2.3.4.1.2	RowStatus	read-create	The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.
INT vRtrIfType	1.3.6.1.4.1.6527.3.1.2.3.4.1.3	INTEGER	read-create	The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror.
TNA vRtrIfName	1.3.6.1.4.1.6527.3.1.2.3.4.1.4	TNamedItem	read-create	The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.
TMN vRtrIfPortID	1.3.6.1.4.1.6527.3.1.2.3.4.1.5	TmnxPortID	read-create	The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.
U32 vRtrIfChannelID	1.3.6.1.4.1.6527.3.1.2.3.4.1.6	Unsigned32	read-create	When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.
TMN vRtrIfEncapValue	1.3.6.1.4.1.6527.3.1.2.3.4.1.7	TmnxEncapVal	read-create	The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.
TMN vRtrIfAdminState	1.3.6.1.4.1.6527.3.1.2.3.4.1.8	TmnxAdminState	read-create	The desired administrative state for this router interface.
TMN vRtrIfOperState	1.3.6.1.4.1.6527.3.1.2.3.4.1.9	TmnxOperState	read-only	The current operational status of this router interface.
STR vRtrIfAlias	1.3.6.1.4.1.6527.3.1.2.3.4.1.10	DisplayString	read-create	An alternative administrative name assigned this router interface.
MAC vRtrIfPhysicalAddress	1.3.6.1.4.1.6527.3.1.2.3.4.1.11	MacAddress	read-create	The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
U32 vRtrIfArpTimeout	1.3.6.1.4.1.6527.3.1.2.3.4.1.12	Unsigned32	read-create	The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.
T/F vRtrIfIcmpMaskReply	1.3.6.1.4.1.6527.3.1.2.3.4.1.13	TruthValue	read-create	When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.
T/F vRtrIfIcmpRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.14	TruthValue	read-create	When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.
U32 vRtrIfIcmpNumRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.15	Unsigned32	read-create	The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.
U32 vRtrIfIcmpRedirectsTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.16	Unsigned32	read-create	The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.
T/F vRtrIfIcmpUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.17	TruthValue	read-create	When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.
U32 vRtrIfIcmpNumUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.18	Unsigned32	read-create	The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.
U32 vRtrIfIcmpUnreachablesTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.19	Unsigned32	read-create	The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.
T/F vRtrIfIcmpTtlExpired	1.3.6.1.4.1.6527.3.1.2.3.4.1.20	TruthValue	read-create	When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.
U32 vRtrIfIcmpNumTtlExpired	1.3.6.1.4.1.6527.3.1.2.3.4.1.21	Unsigned32	read-create	The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.
U32 vRtrIfIcmpTtlExpiredTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.22	Unsigned32	read-create	The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.
T/F vRtrIfNtpBroadcast	1.3.6.1.4.1.6527.3.1.2.3.4.1.23	TruthValue	read-create	When vRtrIfNtpBroadcast is set to 'true', the NTP broadcasts will be transmitted on this interface.
IP vRtrIfUnnumbered	1.3.6.1.4.1.6527.3.1.2.3.4.1.24	IpAddress	read-create	The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.
U32 vRtrIfMtu	1.3.6.1.4.1.6527.3.1.2.3.4.1.25	Unsigned32	read-create	The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.
TNE vRtrIfQosPolicyId	1.3.6.1.4.1.6527.3.1.2.3.4.1.26	TNetworkPolicyID	read-create	The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIngressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.27	TIPFilterID	read-create	The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfEgressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.28	TIPFilterID	read-create	The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
T/F vRtrIfDirectedBroadcast	1.3.6.1.4.1.6527.3.1.2.3.4.1.29	TruthValue	read-create	When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.
TMN vRtrIfMplsStatus	1.3.6.1.4.1.6527.3.1.2.3.4.1.30	TmnxStatus	read-create	Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.
STR vRtrIfUnnumberedIf	1.3.6.1.4.1.6527.3.1.2.3.4.1.31	DisplayString	read-create	The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.
INT vRtrIfCflowd	1.3.6.1.4.1.6527.3.1.2.3.4.1.32	INTEGER	read-create	The value of vRtrIfCflowd specifies the type of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of none (1) indicates that there is no Cflowd analysis associated with this interface.
INT vRtrIfVPNClass	1.3.6.1.4.1.6527.3.1.2.3.4.1.33	INTEGER	read-only	The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface.
TIT vRtrIfDescription	1.3.6.1.4.1.6527.3.1.2.3.4.1.34	TItemLongDescription	read-create	The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
BIT vRtrIfProtocol	1.3.6.1.4.1.6527.3.1.2.3.4.1.35	Bits	read-only	The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.
T/F vRtrIfTosMarkingTrusted	1.3.6.1.4.1.6527.3.1.2.3.4.1.36	TruthValue	read-create	The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, ALCATEL-IND1-TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.
TMN vRtrIfServiceId	1.3.6.1.4.1.6527.3.1.2.3.4.1.37	TmnxServId	read-create	The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.
INT vRtrIfArpPopulate	1.3.6.1.4.1.6527.3.1.2.3.4.1.38	INTEGER	read-create	The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.
T/F vRtrIfIPv6ConfigAllowed	1.3.6.1.4.1.6527.3.1.2.3.4.1.39	TruthValue	read-create	The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured.
TMN vRtrIfIPv6OperState	1.3.6.1.4.1.6527.3.1.2.3.4.1.40	TmnxOperState	read-only	The current operational status for IPv6 on this router interface.
TIP vRtrIfIPv6IngressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.41	TIPFilterID	read-create	The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIPv6EgressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.42	TIPFilterID	read-create	The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
T/F vRtrIfIcmpV6Redirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.43	TruthValue	read-create	When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.
U32 vRtrIfIcmpV6NumRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.44	Unsigned32	read-create	The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.
U32 vRtrIfIcmpV6RedirectsTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.45	Unsigned32	read-create	The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.
T/F vRtrIfIcmpV6Unreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.46	TruthValue	read-create	When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.
U32 vRtrIfIcmpV6NumUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.47	Unsigned32	read-create	The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.
U32 vRtrIfIcmpV6UnreachablesTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.48	Unsigned32	read-create	The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6TimeExceeded	1.3.6.1.4.1.6527.3.1.2.3.4.1.49	TruthValue	read-create	The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.
U32 vRtrIfIcmpV6NumTimeExceeded	1.3.6.1.4.1.6527.3.1.2.3.4.1.50	Unsigned32	read-create	The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.
U32 vRtrIfIcmpV6TimeExceededTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.51	Unsigned32	read-create	The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6PktTooBig	1.3.6.1.4.1.6527.3.1.2.3.4.1.52	TruthValue	read-create	The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.
U32 vRtrIfIcmpV6NumPktTooBig	1.3.6.1.4.1.6527.3.1.2.3.4.1.53	Unsigned32	read-create	The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.
U32 vRtrIfIcmpV6PktTooBigTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.54	Unsigned32	read-create	The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6ParamProblem	1.3.6.1.4.1.6527.3.1.2.3.4.1.55	TruthValue	read-create	The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.
U32 vRtrIfIcmpV6NumParamProblem	1.3.6.1.4.1.6527.3.1.2.3.4.1.56	Unsigned32	read-create	The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.
U32 vRtrIfIcmpV6ParamProblemTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.57	Unsigned32	read-create	The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.
IPt vRtrIfLinkLocalAddressType	1.3.6.1.4.1.6527.3.1.2.3.4.1.58	InetAddressType	read-only	The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.
IP vRtrIfLinkLocalAddress	1.3.6.1.4.1.6527.3.1.2.3.4.1.59	InetAddress	read-only	The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.
TMN vRtrIfLinkLocalAddressState	1.3.6.1.4.1.6527.3.1.2.3.4.1.60	TmnxInetAddrState	read-only	The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.
TIM vRtrIfLastOperStateChange	1.3.6.1.4.1.6527.3.1.2.3.4.1.61	TimeStamp	read-only	The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.
U32 vRtrIfOperMtu	1.3.6.1.4.1.6527.3.1.2.3.4.1.62	Unsigned32	read-only	The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.
U32 vRtrIfGlobalIndex	1.3.6.1.4.1.6527.3.1.2.3.4.1.63	Unsigned32	read-only	The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
U32 vRtrIfDelaySeconds	1.3.6.1.4.1.6527.3.1.2.3.4.1.64	Unsigned32	read-create	The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. The default value of vRtrIfDelaySeconds is 0. It indicates that the interface will become operational as soon as it is enabled.
I32 vRtrIfDelayUpTimer	1.3.6.1.4.1.6527.3.1.2.3.4.1.65	Integer32	read-only	The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.
TNA vRtrIfLocalDhcpServerName	1.3.6.1.4.1.6527.3.1.2.3.4.1.66	TNamedItemOrEmpty	read-create	The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
T/F vRtrIfInitDelayEnable	1.3.6.1.4.1.6527.3.1.2.3.4.1.67	TruthValue	read-create	The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.
TCP vRtrIfCpmProtPolicyId	1.3.6.1.4.1.6527.3.1.2.3.4.1.68	TCpmProtPolicyID	read-create	The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
G32 vRtrIfCpmProtUncfgdProtoDropCnt	1.3.6.1.4.1.6527.3.1.2.3.4.1.69	Gauge32	read-only	The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
U32 vRtrIfLdpSyncTimer	1.3.6.1.4.1.6527.3.1.2.3.4.1.70	Unsigned32	read-create	The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.
vRtrIfNameTable	1.3.6.1.4.1.6527.3.1.2.3.5		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).
vRtrIfNameEntry	1.3.6.1.4.1.6527.3.1.2.3.5.1		not-accessible	Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
NUM vRtrIfNameIndex	1.3.6.1.4.1.6527.3.1.2.3.5.1.1	InterfaceIndex	read-only	The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.
vRtrIpAddrTable	1.3.6.1.4.1.6527.3.1.2.3.6		not-accessible	The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.
vRtrIpAddrEntry	1.3.6.1.4.1.6527.3.1.2.3.6.1		not-accessible	Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.
INT vRiaIndex	1.3.6.1.4.1.6527.3.1.2.3.6.1.1	INTEGER	not-accessible	The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted.
ROW vRiaRowStatus	1.3.6.1.4.1.6527.3.1.2.3.6.1.2	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.
IP vRiaIpAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.3	IpAddress	read-create	The IP address assigned to a router's interface.
IP vRiaNetMask	1.3.6.1.4.1.6527.3.1.2.3.6.1.4	IpAddress	read-create	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
INT vRiaBcastAddrFormat	1.3.6.1.4.1.6527.3.1.2.3.6.1.5	INTEGER	read-create	When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255.
INT vRiaReasmMaxSize	1.3.6.1.4.1.6527.3.1.2.3.6.1.6	INTEGER	read-create	The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.
T/F vRiaIgpInhibit	1.3.6.1.4.1.6527.3.1.2.3.6.1.7	TruthValue	read-create	This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.
IPt vRiaInetAddressType	1.3.6.1.4.1.6527.3.1.2.3.6.1.8	InetAddressType	read-create	vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.
IP vRiaInetAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.9	InetAddress	read-create	The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.
ADR vRiaInetPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.6.1.10	InetAddressPrefixLength	read-create	The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.
TMN vRiaInetAddrState	1.3.6.1.4.1.6527.3.1.2.3.6.1.11	TmnxInetAddrState	read-only	The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.
T/F vRiaInetEui64	1.3.6.1.4.1.6527.3.1.2.3.6.1.12	TruthValue	read-create	The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.
IP vRiaInetOperAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.13	InetAddress	read-only	The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.
IPt vRiaInetGwAddressType	1.3.6.1.4.1.6527.3.1.2.3.6.1.14	InetAddressType	read-create	The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.
IP vRiaInetGwAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.15	InetAddress	read-create	The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.
IPt vRiaInetRemoteIpType	1.3.6.1.4.1.6527.3.1.2.3.6.1.16	InetAddressType	read-create	The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.
IP vRiaInetRemoteIp	1.3.6.1.4.1.6527.3.1.2.3.6.1.17	InetAddress	read-create	The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.
vRtrIpCidrRouteTable	1.3.6.1.4.1.6527.3.1.2.3.7		not-accessible	The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB.
vRtrIpCidrRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.7.1		not-accessible	Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the IP route table.
TIM vRtrIpCidrRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.7.1.1	TimeStamp	read-only	The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.
U32 vRtrIpCidrRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.7.1.2	Unsigned32	read-create	When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
U32 vRtrIpCidrRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.7.1.3	Unsigned32	read-only	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
U32 vRtrStaticRouteNumber	1.3.6.1.4.1.6527.3.1.2.3.8	Unsigned32	read-only	The number of current vRtrStaticRouteTable entries that are 'active'.
vRtrStaticRouteTable	1.3.6.1.4.1.6527.3.1.2.3.9		not-accessible	This entity's Static Routing table.
vRtrStaticRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.9.1		not-accessible	A particular route to a particular destination, through a particular next hop.
IP vRtrStaticRouteDest	1.3.6.1.4.1.6527.3.1.2.3.9.1.1	IpAddress	read-only	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
IP vRtrStaticRouteMask	1.3.6.1.4.1.6527.3.1.2.3.9.1.2	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
INT vRtrStaticRouteIndex	1.3.6.1.4.1.6527.3.1.2.3.9.1.3	INTEGER	read-only	The quaternary index for the vRtrStaticRouteTable.
ROW vRtrStaticRouteRowStatus	1.3.6.1.4.1.6527.3.1.2.3.9.1.4	RowStatus	read-create	The row status variable, used according to row installation and removal conventions.
TIM vRtrStaticRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.9.1.5	TimeStamp	read-only	The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
INT vRtrStaticRouteStatus	1.3.6.1.4.1.6527.3.1.2.3.9.1.6	INTEGER	read-only	The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
INT vRtrStaticRouteStaticType	1.3.6.1.4.1.6527.3.1.2.3.9.1.7	INTEGER	read-create	The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry.
U32 vRtrStaticRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.9.1.8	Unsigned32	read-create	The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
U32 vRtrStaticRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.9.1.9	Unsigned32	read-create	When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
NUM vRtrStaticRouteEgressIfIndex	1.3.6.1.4.1.6527.3.1.2.3.9.1.11	InterfaceIndexOrZero	read-only	The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
IP vRtrStaticRouteNextHop	1.3.6.1.4.1.6527.3.1.2.3.9.1.12	IpAddress	read-create	In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
STR vRtrStaticRouteNextHopUnnumberedIf	1.3.6.1.4.1.6527.3.1.2.3.9.1.13	DisplayString	read-create	The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
TMN vRtrStaticRouteAdminState	1.3.6.1.4.1.6527.3.1.2.3.9.1.14	TmnxAdminState	read-create	The desired administrative state for this virtual router static route
BIT vRtrStaticRouteIgpShortcut	1.3.6.1.4.1.6527.3.1.2.3.9.1.15	Bits	read-create	The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
T/F vRtrStaticRouteDisallowIgp	1.3.6.1.4.1.6527.3.1.2.3.9.1.16	TruthValue	read-create	The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
U32 vRtrStaticRouteTag	1.3.6.1.4.1.6527.3.1.2.3.9.1.17	Unsigned32	read-create	The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
vRtrSvcIpRangeTable	1.3.6.1.4.1.6527.3.1.2.3.10		not-accessible	The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it.
vRtrSvcIpRangeEntry	1.3.6.1.4.1.6527.3.1.2.3.10.1		not-accessible	Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
IP vRtrSvcIpRangeAddress	1.3.6.1.4.1.6527.3.1.2.3.10.1.1	IpAddress	not-accessible	The IP address prefix range assigned to a router's service interface.
U32 vRtrSvcIpRangeMask	1.3.6.1.4.1.6527.3.1.2.3.10.1.2	Unsigned32	not-accessible	The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0.
ROW vRtrSvcIpRangeRowStatus	1.3.6.1.4.1.6527.3.1.2.3.10.1.3	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries.
T/F vRtrSvcIpRangeExclusive	1.3.6.1.4.1.6527.3.1.2.3.10.1.4	TruthValue	read-create	When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports.
vRtrIpNetToMediaTable	1.3.6.1.4.1.6527.3.1.2.3.11		not-accessible	The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB.
vRtrIpNetToMediaEntry	1.3.6.1.4.1.6527.3.1.2.3.11.1		not-accessible	Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the vRtrIpNetToMediaTable.
U32 vRtrIpNetToMediaTimer	1.3.6.1.4.1.6527.3.1.2.3.11.1.1	Unsigned32	read-only	The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache.
TMN vRtrIpNetToMediaOperState	1.3.6.1.4.1.6527.3.1.2.3.11.1.2	TmnxOperState	read-only	The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'.
TIM vRtrInstanceAggregationTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.12	TimeStamp	read-only	Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row.
vRtrInstanceAggregationTable	1.3.6.1.4.1.6527.3.1.2.3.13		not-accessible	The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
vRtrInstanceAggregationEntry	1.3.6.1.4.1.6527.3.1.2.3.13.1		not-accessible	An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user.
IP vRtrAggregationIpPrefix	1.3.6.1.4.1.6527.3.1.2.3.13.1.1	IpAddress	not-accessible	IP address prefix to match for the aggregation.
ADR vRtrAggregationIpPrefixMask	1.3.6.1.4.1.6527.3.1.2.3.13.1.2	IpAddressPrefixLength	not-accessible	Mask length for vRtrAggregationIpPrefix, to match for the aggregation.
ROW vRtrAggregationRowStatus	1.3.6.1.4.1.6527.3.1.2.3.13.1.3	RowStatus	read-create	Row status for this entry.
TIM vRtrAggregationLastChanged	1.3.6.1.4.1.6527.3.1.2.3.13.1.4	TimeStamp	read-create	Time stamp of last change of any object for this entry.
T/F vRtrAggregationSummaryOnly	1.3.6.1.4.1.6527.3.1.2.3.13.1.5	TruthValue	read-create	When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised.
T/F vRtrAggregationASSet	1.3.6.1.4.1.6527.3.1.2.3.13.1.6	TruthValue	read-create	When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR.
TMN vRtrAggregationAggregatorAS	1.3.6.1.4.1.6527.3.1.2.3.13.1.7	TmnxBgpAutonomousSystem	read-create	When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
IP vRtrAggregationAggregatorIPAddr	1.3.6.1.4.1.6527.3.1.2.3.13.1.8	IpAddress	read-create	When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
TMN vRtrAggregationOperState	1.3.6.1.4.1.6527.3.1.2.3.13.1.9	TmnxOperState	read-only	vRtrAggregationOperState specifies the current operational status of the aggregation entry.
vRtrStaticRouteIndexTable	1.3.6.1.4.1.6527.3.1.2.3.14		not-accessible	This entity's Static Route Index Table.
vRtrStaticRouteIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.14.1		not-accessible	The available index for the vRtrStaticRouteTable for every destination per virtual router.
IP vRtrStaticRouteIndexDest	1.3.6.1.4.1.6527.3.1.2.3.14.1.1	IpAddress	read-only	The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
IP vRtrStaticRouteIndexMask	1.3.6.1.4.1.6527.3.1.2.3.14.1.2	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
TES vRtrStaticRouteAvailableIndex	1.3.6.1.4.1.6527.3.1.2.3.14.1.3	TestAndIncr	read-only	The available quaternary index for the vRtrStaticRouteTable.
tmnxVRtrGlobalObjs	1.3.6.1.4.1.6527.3.1.2.3.15
TES vRtrNextVRtrID	1.3.6.1.4.1.6527.3.1.2.3.15.1	TestAndIncr	read-create	The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
G32 vRtrConfiguredVRtrs	1.3.6.1.4.1.6527.3.1.2.3.15.2	Gauge32	read-only	The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.
G32 vRtrActiveVRtrs	1.3.6.1.4.1.6527.3.1.2.3.15.3	Gauge32	read-only	The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminStatus equal 'inService'.
U32 vRtrRouteThresholdSoakTime	1.3.6.1.4.1.6527.3.1.2.3.15.4	Unsigned32	read-write	Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.
U32 vRtrMaxARPEntries	1.3.6.1.4.1.6527.3.1.2.3.15.5	Unsigned32	read-only	vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.
U32 vRtrIPv6RouteThresholdSoakTime	1.3.6.1.4.1.6527.3.1.2.3.15.6	Unsigned32	read-write	The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.
vRtrPolicyTable	1.3.6.1.4.1.6527.3.1.2.3.16		not-accessible	The vRtrPolicyTable has an entry for each virtual router configured in the system.
vRtrPolicyEntry	1.3.6.1.4.1.6527.3.1.2.3.16.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
TPO vRtrImportPolicy1	1.3.6.1.4.1.6527.3.1.2.3.16.1.1	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy2	1.3.6.1.4.1.6527.3.1.2.3.16.1.2	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy3	1.3.6.1.4.1.6527.3.1.2.3.16.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy4	1.3.6.1.4.1.6527.3.1.2.3.16.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy5	1.3.6.1.4.1.6527.3.1.2.3.16.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy1	1.3.6.1.4.1.6527.3.1.2.3.16.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy2	1.3.6.1.4.1.6527.3.1.2.3.16.1.7	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy3	1.3.6.1.4.1.6527.3.1.2.3.16.1.8	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy4	1.3.6.1.4.1.6527.3.1.2.3.16.1.9	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy5	1.3.6.1.4.1.6527.3.1.2.3.16.1.10	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
vRtrTunnelTable	1.3.6.1.4.1.6527.3.1.2.3.17		not-accessible	vRtrTunnelTable maintains a list of tunnels for the specific router instance.
vRtrTunnelEntry	1.3.6.1.4.1.6527.3.1.2.3.17.1		not-accessible	vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP.
IP vRtrTunnelDest	1.3.6.1.4.1.6527.3.1.2.3.17.1.1	IpAddress	not-accessible	vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x.
IP vRtrTunnelMask	1.3.6.1.4.1.6527.3.1.2.3.17.1.2	IpAddress	not-accessible	vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
U32 vRtrTunnelPreference	1.3.6.1.4.1.6527.3.1.2.3.17.1.3	Unsigned32	not-accessible	The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table.
TMN vRtrTunnelType	1.3.6.1.4.1.6527.3.1.2.3.17.1.4	TmnxTunnelType	not-accessible	The type of this tunnel entity.
TMN vRtrTunnelID	1.3.6.1.4.1.6527.3.1.2.3.17.1.5	TmnxTunnelID	not-accessible	Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types.
IP vRtrTunnelNexthop	1.3.6.1.4.1.6527.3.1.2.3.17.1.6	IpAddress	not-accessible	The address of the next system en route; Otherwise, 0.0.0.0.
U32 vRtrTunnelMetric	1.3.6.1.4.1.6527.3.1.2.3.17.1.7	Unsigned32	read-only	vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel.
I32 vRtrTunnelAge	1.3.6.1.4.1.6527.3.1.2.3.17.1.8	Integer32	read-only	The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel.
vRtrIfProxyArpTable	1.3.6.1.4.1.6527.3.1.2.3.18		not-accessible	The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
vRtrIfProxyArpEntry	1.3.6.1.4.1.6527.3.1.2.3.18.1		not-accessible	Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
T/F vRtrIfProxyArp	1.3.6.1.4.1.6527.3.1.2.3.18.1.1	TruthValue	read-create	If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface.
T/F vRtrIfProxyArpLocal	1.3.6.1.4.1.6527.3.1.2.3.18.1.2	TruthValue	read-create	If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet.
TPO vRtrIfProxyArpPolicy1	1.3.6.1.4.1.6527.3.1.2.3.18.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy2	1.3.6.1.4.1.6527.3.1.2.3.18.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy3	1.3.6.1.4.1.6527.3.1.2.3.18.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy4	1.3.6.1.4.1.6527.3.1.2.3.18.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy5	1.3.6.1.4.1.6527.3.1.2.3.18.1.7	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'.
vRtrIfDHCPTable	1.3.6.1.4.1.6527.3.1.2.3.19		not-accessible	The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent.
vRtrIfDHCPEntry	1.3.6.1.4.1.6527.3.1.2.3.19.1		not-accessible	Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
T/F vRtrIfDHCPRelayInfoOption	1.3.6.1.4.1.6527.3.1.2.3.19.1.1	TruthValue	read-create	vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled.
INT vRtrIfDHCPRelayInfoAction	1.3.6.1.4.1.6527.3.1.2.3.19.1.2	INTEGER	read-create	vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information.
INT vRtrIfDHCPRelayCircuitId	1.3.6.1.4.1.6527.3.1.2.3.19.1.3	INTEGER	read-create	The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
INT vRtrIfDHCPRelayRemoteId	1.3.6.1.4.1.6527.3.1.2.3.19.1.4	INTEGER	read-create	The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id.
U32 vRtrIfDHCPAutoFilter	1.3.6.1.4.1.6527.3.1.2.3.19.1.5	Unsigned32	read-create	vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address.
IP vRtrIfDHCPRelayServer1	1.3.6.1.4.1.6527.3.1.2.3.19.1.6	IpAddress	read-create	vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer2	1.3.6.1.4.1.6527.3.1.2.3.19.1.7	IpAddress	read-create	vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer3	1.3.6.1.4.1.6527.3.1.2.3.19.1.8	IpAddress	read-create	vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer4	1.3.6.1.4.1.6527.3.1.2.3.19.1.9	IpAddress	read-create	vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer5	1.3.6.1.4.1.6527.3.1.2.3.19.1.10	IpAddress	read-create	vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer6	1.3.6.1.4.1.6527.3.1.2.3.19.1.11	IpAddress	read-create	vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer7	1.3.6.1.4.1.6527.3.1.2.3.19.1.12	IpAddress	read-create	vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer8	1.3.6.1.4.1.6527.3.1.2.3.19.1.13	IpAddress	read-create	vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded.
T/F vRtrIfDHCPRelayTrusted	1.3.6.1.4.1.6527.3.1.2.3.19.1.14	TruthValue	read-create	When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero.
TMN vRtrIfDHCPAdminState	1.3.6.1.4.1.6527.3.1.2.3.19.1.15	TmnxAdminState	read-create	vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'.
INT vRtrIfDHCPSnooping	1.3.6.1.4.1.6527.3.1.2.3.19.1.16	INTEGER	read-create	vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface.
TIT vRtrIfDHCPDescription	1.3.6.1.4.1.6527.3.1.2.3.19.1.17	TItemDescription	read-create	The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TFI vRtrIfDHCPAutoFilterId	1.3.6.1.4.1.6527.3.1.2.3.19.1.18	TFilterID	read-only	vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface.
U32 vRtrIfDHCPOperAutoFilter	1.3.6.1.4.1.6527.3.1.2.3.19.1.19	Unsigned32	read-only	The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages.
TPO vRtrIfDHCPAuthPolicy	1.3.6.1.4.1.6527.3.1.2.3.19.1.20	TPolicyStatementNameOrEmpty	read-create	Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable.
U32 vRtrIfDHCPLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.19.1.21	Unsigned32	read-create	The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface.
U32 vRtrIfDHCPOperLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.19.1.22	Unsigned32	read-only	The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface.
IPt vRtrIfDHCPGiAddressType	1.3.6.1.4.1.6527.3.1.2.3.19.1.23	InetAddressType	read-create	The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address.
IP vRtrIfDHCPGiAddress	1.3.6.1.4.1.6527.3.1.2.3.19.1.24	InetAddress	read-create	The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType.
T/F vRtrIfDHCPGiAddressAsSrc	1.3.6.1.4.1.6527.3.1.2.3.19.1.25	TruthValue	read-create	The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on.
T/F vRtrIfDHCPMatchOption82	1.3.6.1.4.1.6527.3.1.2.3.19.1.26	TruthValue	read-create	The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used.
STR vRtrIfDHCPRelayRemoteIdStr	1.3.6.1.4.1.6527.3.1.2.3.19.1.27	DisplayString	read-create	The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'.
TMN vRtrIfDHCPProxyAdminState	1.3.6.1.4.1.6527.3.1.2.3.19.1.28	TmnxAdminState	read-create	The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'.
IP vRtrIfDHCPProxyServerAddr	1.3.6.1.4.1.6527.3.1.2.3.19.1.29	IpAddress	read-create	The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server.
U32 vRtrIfDHCPProxyLeaseTime	1.3.6.1.4.1.6527.3.1.2.3.19.1.30	Unsigned32	read-create	The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
T/F vRtrIfDHCPProxyLTRadiusOverride	1.3.6.1.4.1.6527.3.1.2.3.19.1.31	TruthValue	read-create	The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
BIT vRtrIfDHCPVendorIncludeOptions	1.3.6.1.4.1.6527.3.1.2.3.19.1.32	Bits	read-create	The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'.
STR vRtrIfDHCPVendorOptionString	1.3.6.1.4.1.6527.3.1.2.3.19.1.33	DisplayString	read-create	The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'.
T/F vRtrIfDHCPLayer2Header	1.3.6.1.4.1.6527.3.1.2.3.19.1.34	TruthValue	read-create	The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used.
MAC vRtrIfDHCPAntiSpoofMacAddr	1.3.6.1.4.1.6527.3.1.2.3.19.1.35	MacAddress	read-create	The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'.
BIT vRtrIfDHCPClientApplications	1.3.6.1.4.1.6527.3.1.2.3.19.1.36	Bits	read-create	The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface.
vRtrIfDHCPRelayStatsTable	1.3.6.1.4.1.6527.3.1.2.3.20		not-accessible	The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent.
vRtrIfDHCPRelayStatsEntry	1.3.6.1.4.1.6527.3.1.2.3.20.1		not-accessible	Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
C32 vRtrIfDHCPRelayRxPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.1	Counter32	read-only	vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayTxPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.2	Counter32	read-only	vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent.
C32 vRtrIfDHCPRelayRxMalformedPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.3	Counter32	read-only	vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayRxUntrustedPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.4	Counter32	read-only	vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.5	Counter32	read-only	vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsRelayed	1.3.6.1.4.1.6527.3.1.2.3.20.1.6	Counter32	read-only	vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.7	Counter32	read-only	vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsRelayed	1.3.6.1.4.1.6527.3.1.2.3.20.1.8	Counter32	read-only	vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent.
C32 vRtrIfDHCPRelayAuthPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.9	Counter32	read-only	vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful.
C32 vRtrIfDHCPRelayAuthPktsSuccess	1.3.6.1.4.1.6527.3.1.2.3.20.1.10	Counter32	read-only	vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful.
C32 vRtrIfDHCPRelayClientPktsSnooped	1.3.6.1.4.1.6527.3.1.2.3.20.1.11	Counter32	read-only	vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsSnooped	1.3.6.1.4.1.6527.3.1.2.3.20.1.12	Counter32	read-only	vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsProxRad	1.3.6.1.4.1.6527.3.1.2.3.20.1.13	Counter32	read-only	vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server.
C32 vRtrIfDHCPRelayClientPktsProxLS	1.3.6.1.4.1.6527.3.1.2.3.20.1.14	Counter32	read-only	vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
C32 vRtrIfDHCPRelayPktsGenRelease	1.3.6.1.4.1.6527.3.1.2.3.20.1.15	Counter32	read-only	vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server.
C32 vRtrIfDHCPRelayPktsGenForceRenew	1.3.6.1.4.1.6527.3.1.2.3.20.1.16	Counter32	read-only	vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients.
tmnxVRtrNotificationObjects	1.3.6.1.4.1.6527.3.1.2.3.21
IP vRtrAutoFilterDHCPClientAddress	1.3.6.1.4.1.6527.3.1.2.3.21.1	IpAddress	accessible-for-notify	The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address.
U32 vRtrAutoFilterDHCPClientLease	1.3.6.1.4.1.6527.3.1.2.3.21.2	Unsigned32	accessible-for-notify	The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time.
I32 vRtrDHCPClientLease	1.3.6.1.4.1.6527.3.1.2.3.21.3	Integer32	accessible-for-notify	The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap.
IP vRtrDhcpLseStateOldCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.4	IpAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state.
MAC vRtrDhcpLseStateOldChAddr	1.3.6.1.4.1.6527.3.1.2.3.21.5	MacAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state.
IP vRtrDhcpLseStateNewCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.6	IpAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap.
MAC vRtrDhcpLseStateNewChAddr	1.3.6.1.4.1.6527.3.1.2.3.21.7	MacAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap.
IP vRtrDhcpRestoreLseStateCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.8	IpAddress	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap.
TMN vRtrDhcpRestoreLseStateVRtrId	1.3.6.1.4.1.6527.3.1.2.3.21.9	TmnxVRtrID	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap.
NUM vRtrDhcpRestoreLseStateIfIndex	1.3.6.1.4.1.6527.3.1.2.3.21.10	InterfaceIndex	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap.
STR vRtrDhcpRestoreLseStateProblem	1.3.6.1.4.1.6527.3.1.2.3.21.11	DisplayString	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored.
STR vRtrDhcpPacketProblem	1.3.6.1.4.1.6527.3.1.2.3.21.12	DisplayString	accessible-for-notify	The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system.
STR vRtrDhcpLseStatePopulateError	1.3.6.1.4.1.6527.3.1.2.3.21.13	DisplayString	accessible-for-notify	The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message.
TMN vRtrBfdSlotNumber	1.3.6.1.4.1.6527.3.1.2.3.21.14	TmnxSlotNum	accessible-for-notify	The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
U32 vRtrNumberOfBfdSessionsOnSlot	1.3.6.1.4.1.6527.3.1.2.3.21.15	Unsigned32	accessible-for-notify	The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
BIT vRtrBfdMaxSessionReason	1.3.6.1.4.1.6527.3.1.2.3.21.16	Bits	accessible-for-notify	The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
IPt vRtrDHCP6ServerNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.17	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr.
IP vRtrDHCP6ServerNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.18	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server.
IPt vRtrDHCP6ClientNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.19	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr.
IP vRtrDHCP6ClientNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.20	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client.
IPt vRtrDHCP6AssignedNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.21	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr.
IP vRtrDHCP6AssignedNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.22	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client.
ADR vRtrDHCP6AssignedPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.23	InetAddressPrefixLength	accessible-for-notify	The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr.
IPt vRtrDHCP6OldAssignedNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.24	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr.
IP vRtrDHCP6OldAssignedNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.25	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client.
ADR vRtrDHCP6OldAssignedPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.26	InetAddressPrefixLength	accessible-for-notify	The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr.
OCT vRtrDHCP6NewClientId	1.3.6.1.4.1.6527.3.1.2.3.21.27	OCTET STRING	accessible-for-notify	The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID).
OCT vRtrDHCP6OldClientId	1.3.6.1.4.1.6527.3.1.2.3.21.28	OCTET STRING	accessible-for-notify	The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID).
STR vRtrDHCP6LeaseOverrideResult	1.3.6.1.4.1.6527.3.1.2.3.21.29	DisplayString	accessible-for-notify	The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden.
IPt vRtrInetStatRteCpeNotifyAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.30	InetAddressType	accessible-for-notify	The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr.
IP vRtrInetStatRteCpeNotifyAddr	1.3.6.1.4.1.6527.3.1.2.3.21.31	InetAddress	accessible-for-notify	The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE.
INT vRtrInetStaticRouteCpeStatus	1.3.6.1.4.1.6527.3.1.2.3.21.32	INTEGER	accessible-for-notify	The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'.
IPt vRtrManagedRouteInetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.33	InetAddressType	accessible-for-notify	The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr.
IP vRtrManagedRouteInetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.34	InetAddress	accessible-for-notify	The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route.
ADR vRtrManagedRoutePrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.35	InetAddressPrefixLength	accessible-for-notify	The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr.
STR vRtrFailureDescription	1.3.6.1.4.1.6527.3.1.2.3.21.36	DisplayString	accessible-for-notify	The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent.
vRtrIfDHCPLeaseStateTable	1.3.6.1.4.1.6527.3.1.2.3.22		not-accessible	vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLeaseStateTable.
vRtrIfDHCPLeaseStateEntry	1.3.6.1.4.1.6527.3.1.2.3.22.1		not-accessible	DHCP lease state information for a virtual router interface.
IP vRtrIfDHCPLseStateCiAddr	1.3.6.1.4.1.6527.3.1.2.3.22.1.1	IpAddress	not-accessible	The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state.
MAC vRtrIfDHCPLseStateChAddr	1.3.6.1.4.1.6527.3.1.2.3.22.1.2	MacAddress	read-only	The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state.
U32 vRtrIfDHCPLseStateRemainLseTime	1.3.6.1.4.1.6527.3.1.2.3.22.1.3	Unsigned32	read-only	The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state.
OCT vRtrIfDHCPLseStateOption82	1.3.6.1.4.1.6527.3.1.2.3.22.1.4	OCTET STRING	read-only	vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state.
U32 vRtrIfDHCPLseStatePersistKey	1.3.6.1.4.1.6527.3.1.2.3.22.1.5	Unsigned32	read-only	The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file.
vRtrAdvPrefixTable	1.3.6.1.4.1.6527.3.1.2.3.23		not-accessible	This table allows the user to configure IPv6 prefixes for router advertisements on an interface
vRtrAdvPrefixEntry	1.3.6.1.4.1.6527.3.1.2.3.23.1		not-accessible	An entry in the vRtrAdvPrefixTable.
NUM vRtrAdvPrefixIfIndex	1.3.6.1.4.1.6527.3.1.2.3.23.1.1	InterfaceIndex	not-accessible	The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
IP vRtrAdvPrefixPrefix	1.3.6.1.4.1.6527.3.1.2.3.23.1.2	InetAddress	not-accessible	The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes.
ADR vRtrAdvPrefixLength	1.3.6.1.4.1.6527.3.1.2.3.23.1.3	InetAddressPrefixLength	not-accessible	The prefix length associated with this prefix. The value 0 has no special meaning for this object.
ROW vRtrAdvPrefixRowStatus	1.3.6.1.4.1.6527.3.1.2.3.23.1.4	RowStatus	read-create	The row status used for creation and deletion of router advertisement prefix entries.
T/F vRtrAdvPrefixOnLinkFlag	1.3.6.1.4.1.6527.3.1.2.3.23.1.5	TruthValue	read-create	This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
T/F vRtrAdvPrefixAutonomousFlag	1.3.6.1.4.1.6527.3.1.2.3.23.1.6	TruthValue	read-create	Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address.
U32 vRtrAdvPrefixPreferredLifetime	1.3.6.1.4.1.6527.3.1.2.3.23.1.7	Unsigned32	read-create	The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
U32 vRtrAdvPrefixValidLifetime	1.3.6.1.4.1.6527.3.1.2.3.23.1.8	Unsigned32	read-create	The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
vRtrInetStaticRouteTable	1.3.6.1.4.1.6527.3.1.2.3.24		not-accessible	The table of addressing information relevant to this entity's Static Routing table.
vRtrInetStaticRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.24.1		not-accessible	A particular route to a particular destination, through a particular next hop.
IPt vRtrInetStaticRouteDestType	1.3.6.1.4.1.6527.3.1.2.3.24.1.1	InetAddressType	not-accessible	The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address.
IP vRtrInetStaticRouteDest	1.3.6.1.4.1.6527.3.1.2.3.24.1.2	InetAddress	not-accessible	The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route.
ADR vRtrInetStaticRouteDestPfxLen	1.3.6.1.4.1.6527.3.1.2.3.24.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address.
INT vRtrInetStaticRouteIndex	1.3.6.1.4.1.6527.3.1.2.3.24.1.4	INTEGER	not-accessible	The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
ROW vRtrInetStaticRouteRowStatus	1.3.6.1.4.1.6527.3.1.2.3.24.1.5	RowStatus	read-create	vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table.
TIM vRtrInetStaticRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.24.1.6	TimeStamp	read-only	The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
INT vRtrInetStaticRouteStatus	1.3.6.1.4.1.6527.3.1.2.3.24.1.7	INTEGER	read-only	The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
INT vRtrInetStaticRouteStaticType	1.3.6.1.4.1.6527.3.1.2.3.24.1.8	INTEGER	read-create	The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry.
U32 vRtrInetStaticRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.24.1.9	Unsigned32	read-create	The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
U32 vRtrInetStaticRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.24.1.10	Unsigned32	read-create	The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
NUM vRtrInetStaticRouteEgressIfIndex	1.3.6.1.4.1.6527.3.1.2.3.24.1.11	InterfaceIndexOrZero	read-only	The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
IPt vRtrInetStaticRouteNextHopType	1.3.6.1.4.1.6527.3.1.2.3.24.1.12	InetAddressType	read-create	The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address.
IP vRtrInetStaticRouteNextHop	1.3.6.1.4.1.6527.3.1.2.3.24.1.13	InetAddress	read-create	The value of vRtrInetStaticRouteNextHop specifies the address of the next hop for the static route. In case of remote routes, the address of the next system en route. This member is complemented by vRtrInetStaticRouteNextHopIf. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
STR vRtrInetStaticRouteNextHopIf	1.3.6.1.4.1.6527.3.1.2.3.24.1.14	DisplayString	read-create	The value of vRtrInetStaticRouteNextHopIf specifies the interface of the next hop for the static route. The name of the Interface which will be the nexthop for this route. This member is complemented by vRtrInetStaticRouteNextHop. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
TMN vRtrInetStaticRouteAdminState	1.3.6.1.4.1.6527.3.1.2.3.24.1.15	TmnxAdminState	read-create	The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route
BIT vRtrInetStaticRouteIgpShortcut	1.3.6.1.4.1.6527.3.1.2.3.24.1.16	Bits	read-create	The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
T/F vRtrInetStaticRouteDisallowIgp	1.3.6.1.4.1.6527.3.1.2.3.24.1.17	TruthValue	read-create	The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
U32 vRtrInetStaticRouteTag	1.3.6.1.4.1.6527.3.1.2.3.24.1.18	Unsigned32	read-create	The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
T/F vRtrInetStaticRouteEnableBfd	1.3.6.1.4.1.6527.3.1.2.3.24.1.19	TruthValue	read-create	The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD.
IPt vRtrInetStaticRouteCpeAddrType	1.3.6.1.4.1.6527.3.1.2.3.24.1.20	InetAddressType	read-create	The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
IP vRtrInetStaticRouteCpeAddr	1.3.6.1.4.1.6527.3.1.2.3.24.1.21	InetAddress	read-create	The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
U32 vRtrInetStaticRouteCpeInterval	1.3.6.1.4.1.6527.3.1.2.3.24.1.22	Unsigned32	read-create	The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr.
U32 vRtrInetStaticRouteCpeDropCnt	1.3.6.1.4.1.6527.3.1.2.3.24.1.23	Unsigned32	read-create	The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated.
T/F vRtrInetStaticRouteCpeEnableLog	1.3.6.1.4.1.6527.3.1.2.3.24.1.24	TruthValue	read-create	The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled.
vRtrInetStaticRouteIndexTable	1.3.6.1.4.1.6527.3.1.2.3.25		not-accessible	This entity's Static Route Index Table.
vRtrInetStaticRouteIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.25.1		not-accessible	The available index for the vRtrInetStaticRouteTable for every destination per virtual router.
TES vRtrInetStaticRouteAvailIndex	1.3.6.1.4.1.6527.3.1.2.3.25.1.1	TestAndIncr	read-only	The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
TIM vRtrInetInstAggrTblLastChged	1.3.6.1.4.1.6527.3.1.2.3.26	TimeStamp	read-only	Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row.
vRtrInetInstAggrTable	1.3.6.1.4.1.6527.3.1.2.3.27		not-accessible	The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
vRtrInetInstAggrEntry	1.3.6.1.4.1.6527.3.1.2.3.27.1		not-accessible	vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user.
IPt vRtrInetAggrIpPrefixType	1.3.6.1.4.1.6527.3.1.2.3.27.1.1	InetAddressType	not-accessible	The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix.
IP vRtrInetAggrIpPrefix	1.3.6.1.4.1.6527.3.1.2.3.27.1.2	InetAddress	not-accessible	The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation.
ADR vRtrInetAggrIpPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.27.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation.
ROW vRtrInetAggrRowStatus	1.3.6.1.4.1.6527.3.1.2.3.27.1.4	RowStatus	read-create	vRtrInetAggrRowStatus controls the creation and deletion of rows in the table.
TIM vRtrInetAggrLastChanged	1.3.6.1.4.1.6527.3.1.2.3.27.1.5	TimeStamp	read-create	The value of vRtrInetAggrLastChanged specifies the time stamp of the last change to this row of vRtrInetInstAggrTable .
T/F vRtrInetAggrSummaryOnly	1.3.6.1.4.1.6527.3.1.2.3.27.1.6	TruthValue	read-create	The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised.
T/F vRtrInetAggrASSet	1.3.6.1.4.1.6527.3.1.2.3.27.1.7	TruthValue	read-create	The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR.
TMN vRtrInetAggrAggregatorAS	1.3.6.1.4.1.6527.3.1.2.3.27.1.8	TmnxBgpAutonomousSystem	read-create	The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
IP vRtrInetAggrAggregatorIPAddr	1.3.6.1.4.1.6527.3.1.2.3.27.1.9	IpAddress	read-create	The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
TMN vRtrInetAggrOperState	1.3.6.1.4.1.6527.3.1.2.3.27.1.10	TmnxOperState	read-only	The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry.
vRtrInetSvcIpRangeTable	1.3.6.1.4.1.6527.3.1.2.3.28		not-accessible	The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it.
vRtrInetSvcIpRangeEntry	1.3.6.1.4.1.6527.3.1.2.3.28.1		not-accessible	Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
IPt vRtrInetSvcIpRangeAddrType	1.3.6.1.4.1.6527.3.1.2.3.28.1.1	InetAddressType	not-accessible	The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr.
IP vRtrInetSvcIpRangeAddr	1.3.6.1.4.1.6527.3.1.2.3.28.1.2	InetAddress	not-accessible	The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType.
ADR vRtrInetSvcIpRangePfxLen	1.3.6.1.4.1.6527.3.1.2.3.28.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range.
ROW vRtrInetSvcIpRangeRowStatus	1.3.6.1.4.1.6527.3.1.2.3.28.1.4	RowStatus	read-create	The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges.
T/F vRtrInetSvcIpRangeExclusive	1.3.6.1.4.1.6527.3.1.2.3.28.1.5	TruthValue	read-create	The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports.
vRtrIcmp6Table	1.3.6.1.4.1.6527.3.1.2.3.31		not-accessible	The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance.
vRtrIcmp6Entry	1.3.6.1.4.1.6527.3.1.2.3.31.1		not-accessible	Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted.
C32 vRtrIcmp6InMsgs	1.3.6.1.4.1.6527.3.1.2.3.31.1.1	Counter32	read-only	The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors.
C32 vRtrIcmp6InErrors	1.3.6.1.4.1.6527.3.1.2.3.31.1.2	Counter32	read-only	The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
C32 vRtrIcmp6InDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.31.1.3	Counter32	read-only	The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance.
C32 vRtrIcmp6InAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.31.1.4	Counter32	read-only	The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance.
C32 vRtrIcmp6InTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.31.1.5	Counter32	read-only	The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance.
C32 vRtrIcmp6InParmProblems	1.3.6.1.4.1.6527.3.1.2.3.31.1.6	Counter32	read-only	The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance.
C32 vRtrIcmp6InPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.31.1.7	Counter32	read-only	The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance.
C32 vRtrIcmp6InEchos	1.3.6.1.4.1.6527.3.1.2.3.31.1.8	Counter32	read-only	The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance.
C32 vRtrIcmp6InEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.31.1.9	Counter32	read-only	The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance.
C32 vRtrIcmp6InRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.10	Counter32	read-only	The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance.
C32 vRtrIcmp6InRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.11	Counter32	read-only	The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance.
C32 vRtrIcmp6InNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.12	Counter32	read-only	The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance.
C32 vRtrIcmp6InNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.13	Counter32	read-only	The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance.
C32 vRtrIcmp6InRedirects	1.3.6.1.4.1.6527.3.1.2.3.31.1.14	Counter32	read-only	The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance.
C32 vRtrIcmp6InGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.31.1.15	Counter32	read-only	The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance.
C32 vRtrIcmp6InGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.31.1.16	Counter32	read-only	The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance.
C32 vRtrIcmp6InGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.31.1.17	Counter32	read-only	The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance.
C32 vRtrIcmp6OutMsgs	1.3.6.1.4.1.6527.3.1.2.3.31.1.18	Counter32	read-only	The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors.
C32 vRtrIcmp6OutErrors	1.3.6.1.4.1.6527.3.1.2.3.31.1.19	Counter32	read-only	The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C32 vRtrIcmp6OutDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.31.1.20	Counter32	read-only	The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance.
C32 vRtrIcmp6OutAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.31.1.21	Counter32	read-only	The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance.
C32 vRtrIcmp6OutTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.31.1.22	Counter32	read-only	The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance.
C32 vRtrIcmp6OutParmProblems	1.3.6.1.4.1.6527.3.1.2.3.31.1.23	Counter32	read-only	The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance.
C32 vRtrIcmp6OutPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.31.1.24	Counter32	read-only	The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance.
C32 vRtrIcmp6OutEchos	1.3.6.1.4.1.6527.3.1.2.3.31.1.25	Counter32	read-only	The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance.
C32 vRtrIcmp6OutEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.31.1.26	Counter32	read-only	The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance.
C32 vRtrIcmp6OutRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.27	Counter32	read-only	The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance.
C32 vRtrIcmp6OutRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.28	Counter32	read-only	The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance.
C32 vRtrIcmp6OutNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.29	Counter32	read-only	The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance.
C32 vRtrIcmp6OutNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.30	Counter32	read-only	The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance.
C32 vRtrIcmp6OutRedirects	1.3.6.1.4.1.6527.3.1.2.3.31.1.31	Counter32	read-only	The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.31.1.32	Counter32	read-only	The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.31.1.33	Counter32	read-only	The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.31.1.34	Counter32	read-only	The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance.
vRtrIfIcmp6Table	1.3.6.1.4.1.6527.3.1.2.3.32		not-accessible	The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface.
vRtrIfIcmp6Entry	1.3.6.1.4.1.6527.3.1.2.3.32.1		not-accessible	Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
C32 vRtrIfIcmp6InMsgs	1.3.6.1.4.1.6527.3.1.2.3.32.1.1	Counter32	read-only	The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages.
C32 vRtrIfIcmp6InErrors	1.3.6.1.4.1.6527.3.1.2.3.32.1.2	Counter32	read-only	The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
C32 vRtrIfIcmp6InDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.32.1.3	Counter32	read-only	The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface.
C32 vRtrIfIcmp6InAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.32.1.4	Counter32	read-only	The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface.
C32 vRtrIfIcmp6InTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.32.1.5	Counter32	read-only	The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface.
C32 vRtrIfIcmp6InParmProblems	1.3.6.1.4.1.6527.3.1.2.3.32.1.6	Counter32	read-only	The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface.
C32 vRtrIfIcmp6InPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.32.1.7	Counter32	read-only	The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface.
C32 vRtrIfIcmp6InEchos	1.3.6.1.4.1.6527.3.1.2.3.32.1.8	Counter32	read-only	The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface.
C32 vRtrIfIcmp6InEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.32.1.9	Counter32	read-only	The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface.
C32 vRtrIfIcmp6InRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.10	Counter32	read-only	The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface.
C32 vRtrIfIcmp6InRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.11	Counter32	read-only	The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface.
C32 vRtrIfIcmp6InNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.12	Counter32	read-only	The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface.
C32 vRtrIfIcmp6InNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.13	Counter32	read-only	The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface.
C32 vRtrIfIcmp6InRedirects	1.3.6.1.4.1.6527.3.1.2.3.32.1.14	Counter32	read-only	The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface.
C32 vRtrIfIcmp6InGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.32.1.15	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface.
C32 vRtrIfIcmp6InGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.32.1.16	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface.
C32 vRtrIfIcmp6InGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.32.1.17	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface.
C32 vRtrIfIcmp6OutMsgs	1.3.6.1.4.1.6527.3.1.2.3.32.1.18	Counter32	read-only	The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors.
C32 vRtrIfIcmp6OutErrors	1.3.6.1.4.1.6527.3.1.2.3.32.1.19	Counter32	read-only	The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C32 vRtrIfIcmp6OutDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.32.1.20	Counter32	read-only	The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface.
C32 vRtrIfIcmp6OutAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.32.1.21	Counter32	read-only	The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface.
C32 vRtrIfIcmp6OutTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.32.1.22	Counter32	read-only	The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface.
C32 vRtrIfIcmp6OutParmProblems	1.3.6.1.4.1.6527.3.1.2.3.32.1.23	Counter32	read-only	The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface.
C32 vRtrIfIcmp6OutPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.32.1.24	Counter32	read-only	The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface.
C32 vRtrIfIcmp6OutEchos	1.3.6.1.4.1.6527.3.1.2.3.32.1.25	Counter32	read-only	The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface.
C32 vRtrIfIcmp6OutEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.32.1.26	Counter32	read-only	The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface.
C32 vRtrIfIcmp6OutRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.27	Counter32	read-only	The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface.
TIM vRtrIfIcmp6OutRtrSolicitsTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.28	TimeStamp	read-only	The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface.
C32 vRtrIfIcmp6OutRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.29	Counter32	read-only	The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface.
TIM vRtrIfIcmp6OutRtrAdvTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.30	TimeStamp	read-only	The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface.
C32 vRtrIfIcmp6OutNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.31	Counter32	read-only	The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface.
TIM vRtrIfIcmp6OutNbrSolicitsTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.32	TimeStamp	read-only	The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface.
C32 vRtrIfIcmp6OutNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.33	Counter32	read-only	The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface.
TIM vRtrIfIcmp6OutNbrAdvTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.34	TimeStamp	read-only	The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface.
C32 vRtrIfIcmp6OutRedirects	1.3.6.1.4.1.6527.3.1.2.3.32.1.35	Counter32	read-only	The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.32.1.36	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.32.1.37	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.32.1.38	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface.
vRtrIfBfdTable	1.3.6.1.4.1.6527.3.1.2.3.33		not-accessible	The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices.
vRtrIfBfdEntry	1.3.6.1.4.1.6527.3.1.2.3.33.1		not-accessible	Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
TMN vRtrIfBfdAdminState	1.3.6.1.4.1.6527.3.1.2.3.33.1.1	TmnxAdminState	read-write	The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot.
U32 vRtrIfBfdTransmitInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.2	Unsigned32	read-write	The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface.
U32 vRtrIfBfdReceiveInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.3	Unsigned32	read-write	The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface.
U32 vRtrIfBfdMultiplier	1.3.6.1.4.1.6527.3.1.2.3.33.1.4	Unsigned32	read-write	The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault.
U32 vRtrIfBfdEchoInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.5	Unsigned32	read-write	The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface.
vRtrIfBfdSessionTable	1.3.6.1.4.1.6527.3.1.2.3.34		not-accessible	The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings.
vRtrIfBfdSessionEntry	1.3.6.1.4.1.6527.3.1.2.3.34.1		not-accessible	Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
IPt vRtrIfBfdSessionLclAddrType	1.3.6.1.4.1.6527.3.1.2.3.34.1.1	InetAddressType	not-accessible	The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr.
IP vRtrIfBfdSessionLclAddr	1.3.6.1.4.1.6527.3.1.2.3.34.1.2	InetAddress	not-accessible	The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType.
IPt vRtrIfBfdSessionRemAddrType	1.3.6.1.4.1.6527.3.1.2.3.34.1.3	InetAddressType	not-accessible	The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr.
IP vRtrIfBfdSessionRemAddr	1.3.6.1.4.1.6527.3.1.2.3.34.1.4	InetAddress	not-accessible	The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType.
TMN vRtrIfBfdSessionOperState	1.3.6.1.4.1.6527.3.1.2.3.34.1.5	TmnxOperState	read-only	The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface.
INT vRtrIfBfdSessionState	1.3.6.1.4.1.6527.3.1.2.3.34.1.6	INTEGER	read-only	The value of vRtrIfBfdSessionState indicates the state of the BFD protocl on this interface.
BIT vRtrIfBfdSessionOperFlags	1.3.6.1.4.1.6527.3.1.2.3.34.1.7	Bits	read-only	The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up.
C32 vRtrIfBfdSessionMesgRecv	1.3.6.1.4.1.6527.3.1.2.3.34.1.8	Counter32	read-only	The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session.
C32 vRtrIfBfdSessionMesgSent	1.3.6.1.4.1.6527.3.1.2.3.34.1.9	Counter32	read-only	The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session.
TIM vRtrIfBfdSessionLastDownTime	1.3.6.1.4.1.6527.3.1.2.3.34.1.10	TimeStamp	read-only	The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down.
TIM vRtrIfBfdSessionLastUpTime	1.3.6.1.4.1.6527.3.1.2.3.34.1.11	TimeStamp	read-only	The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up.
C32 vRtrIfBfdSessionUpCount	1.3.6.1.4.1.6527.3.1.2.3.34.1.12	Counter32	read-only	The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'.
C32 vRtrIfBfdSessionDownCount	1.3.6.1.4.1.6527.3.1.2.3.34.1.13	Counter32	read-only	The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'.
U32 vRtrIfBfdSessionLclDisc	1.3.6.1.4.1.6527.3.1.2.3.34.1.14	Unsigned32	read-only	The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session.
U32 vRtrIfBfdSessionRemDisc	1.3.6.1.4.1.6527.3.1.2.3.34.1.15	Unsigned32	read-only	The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session.
BIT vRtrIfBfdSessionProtocols	1.3.6.1.4.1.6527.3.1.2.3.34.1.16	Bits	read-only	The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session.
U32 vRtrIfBfdSessionTxInterval	1.3.6.1.4.1.6527.3.1.2.3.34.1.17	Unsigned32	read-only	The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdTransmitInterval' and the remote node's receive interval.
U32 vRtrIfBfdSessionRxInterval	1.3.6.1.4.1.6527.3.1.2.3.34.1.18	Unsigned32	read-only	The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdReceiveInterval' and the remote node's transmit interval.
INT vRtrIfBfdSessionType	1.3.6.1.4.1.6527.3.1.2.3.34.1.19	INTEGER	read-only	The value of vRtrIfBfdSessionType indicates if the bfd session is running on IOM or CPM.
TIM vRtrIfDHCP6TableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.35	TimeStamp	read-only	The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table
vRtrIfDHCP6Table	1.3.6.1.4.1.6527.3.1.2.3.36		not-accessible	The vRtrIfDHCP6Table is used to configure the interface parameters for the DHCP6 Relay agent.
vRtrIfDHCP6Entry	1.3.6.1.4.1.6527.3.1.2.3.36.1		not-accessible	Each row entry represents information related to DHCP6 Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
TIM vRtrIfDHCP6LastChanged	1.3.6.1.4.1.6527.3.1.2.3.36.1.1	TimeStamp	read-only	The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry.
TMN vRtrIfDHCP6AdminState	1.3.6.1.4.1.6527.3.1.2.3.36.1.2	TmnxAdminState	read-create	The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed.
INT vRtrIfDHCP6OperState	1.3.6.1.4.1.6527.3.1.2.3.36.1.3	INTEGER	read-only	The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node.
TIT vRtrIfDHCP6Description	1.3.6.1.4.1.6527.3.1.2.3.36.1.4	TItemDescription	read-create	The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
ADR vRtrIfDHCP6RelayServer1	1.3.6.1.4.1.6527.3.1.2.3.36.1.5	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer2	1.3.6.1.4.1.6527.3.1.2.3.36.1.6	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer3	1.3.6.1.4.1.6527.3.1.2.3.36.1.7	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer4	1.3.6.1.4.1.6527.3.1.2.3.36.1.8	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer5	1.3.6.1.4.1.6527.3.1.2.3.36.1.9	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer6	1.3.6.1.4.1.6527.3.1.2.3.36.1.10	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer7	1.3.6.1.4.1.6527.3.1.2.3.36.1.11	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer8	1.3.6.1.4.1.6527.3.1.2.3.36.1.12	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to.
INT vRtrIfDHCP6RelayItfIdOption	1.3.6.1.4.1.6527.3.1.2.3.36.1.13	INTEGER	read-create	The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used.
U32 vRtrIfDHCP6LeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.36.1.14	Unsigned32	read-create	The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface.
U32 vRtrIfDHCP6CurrLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.36.1.15	Unsigned32	read-only	The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function.
ADR vRtrIfDHCP6SourceAddress	1.3.6.1.4.1.6527.3.1.2.3.36.1.16	InetAddressIPv6	read-create	The value of the object vRtrIfDHCP6SourceAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system Ipv6 address is taken.
T/F vRtrIfDHCP6EnableNgbrResolution	1.3.6.1.4.1.6527.3.1.2.3.36.1.17	TruthValue	read-create	The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4.
T/F vRtrIfDHCP6RemoteIdOption	1.3.6.1.4.1.6527.3.1.2.3.36.1.18	TruthValue	read-create	The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId.
INT vRtrIfDHCP6PfxdAdminState	1.3.6.1.4.1.6527.3.1.2.3.36.1.19	INTEGER	read-create	The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system.
U32 vRtrIfDHCP6ServerMaxLeaseStates	1.3.6.1.4.1.6527.3.1.2.3.36.1.20	Unsigned32	read-create	The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface.
U32 vRtrIfDHCP6CurrServerLeaseStates	1.3.6.1.4.1.6527.3.1.2.3.36.1.21	Unsigned32	read-only	The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function.
STR vRtrIfDHCP6ItfIdString	1.3.6.1.4.1.6527.3.1.2.3.36.1.22	DisplayString	read-create	The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4).
vRtrIfGlobalIndexTable	1.3.6.1.4.1.6527.3.1.2.3.37		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).
vRtrIfGlobalIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.37.1		not-accessible	Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
TMN vRtrIfGlobalIndexvRtrID	1.3.6.1.4.1.6527.3.1.2.3.37.1.1	TmnxVRtrID	read-only	The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.
NUM vRtrIfGlobalIndexvRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.37.1.2	InterfaceIndex	read-only	The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
vRtrIfProxyNDTable	1.3.6.1.4.1.6527.3.1.2.3.38		not-accessible	The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
vRtrIfProxyNDEntry	1.3.6.1.4.1.6527.3.1.2.3.38.1		not-accessible	Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
T/F vRtrIfProxyNDLocal	1.3.6.1.4.1.6527.3.1.2.3.38.1.1	TruthValue	read-create	If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet.
TPO vRtrIfProxyNDPolicy1	1.3.6.1.4.1.6527.3.1.2.3.38.1.2	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy2	1.3.6.1.4.1.6527.3.1.2.3.38.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy3	1.3.6.1.4.1.6527.3.1.2.3.38.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy4	1.3.6.1.4.1.6527.3.1.2.3.38.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy5	1.3.6.1.4.1.6527.3.1.2.3.38.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TIM vRtrIfDHCP6PfxDelegationLstChgd	1.3.6.1.4.1.6527.3.1.2.3.39	TimeStamp	read-only	The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable
vRtrIfDHCP6PfxDelegationTable	1.3.6.1.4.1.6527.3.1.2.3.40		not-accessible	The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned.
vRtrIfDHCP6PfxDelegationEntry	1.3.6.1.4.1.6527.3.1.2.3.40.1		not-accessible	Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus.
ADR vRtrIfDHCP6PfxdPrefix	1.3.6.1.4.1.6527.3.1.2.3.40.1.1	InetAddressIPv6	not-accessible	The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated.
ADR vRtrIfDHCP6PfxdPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.40.1.2	InetAddressPrefixLength	not-accessible	The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system.
ROW vRtrIfDHCP6PfxdRowStatus	1.3.6.1.4.1.6527.3.1.2.3.40.1.3	RowStatus	read-create	The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6).
TIM vRtrIfDHCP6PfxdLastChanged	1.3.6.1.4.1.6527.3.1.2.3.40.1.4	TimeStamp	read-only	The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed.
OCT vRtrIfDHCP6PfxdDUID	1.3.6.1.4.1.6527.3.1.2.3.40.1.6	OCTET STRING	read-create	The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router.
U32 vRtrIfDHCP6PfxdIAID	1.3.6.1.4.1.6527.3.1.2.3.40.1.7	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done.
U32 vRtrIfDHCP6PfxdPrefLifetime	1.3.6.1.4.1.6527.3.1.2.3.40.1.8	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity.
U32 vRtrIfDHCP6PfxdValidLifetime	1.3.6.1.4.1.6527.3.1.2.3.40.1.9	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity.
vRtrDHCP6DropStatTable	1.3.6.1.4.1.6527.3.1.2.3.41		not-accessible	The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system.
vRtrDHCP6DropStatEntry	1.3.6.1.4.1.6527.3.1.2.3.41.1		not-accessible	Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
INT vRtrDHCP6DropStatReason	1.3.6.1.4.1.6527.3.1.2.3.41.1.1	INTEGER	not-accessible	The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option
TIM vRtrDHCP6DropStatLastCleared	1.3.6.1.4.1.6527.3.1.2.3.41.1.2	TimeStamp	read-only	The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
G32 vRtrDHCP6DropStatPktsDropped	1.3.6.1.4.1.6527.3.1.2.3.41.1.3	Gauge32	read-only	The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason.
vRtrDHCP6MsgStatTable	1.3.6.1.4.1.6527.3.1.2.3.42		not-accessible	The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system.
vRtrDHCP6MsgStatEntry	1.3.6.1.4.1.6527.3.1.2.3.42.1		not-accessible	Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
TMN vRtrDHCP6MsgStatsMsgType	1.3.6.1.4.1.6527.3.1.2.3.42.1.1	TmnxDHCP6MsgType	not-accessible	The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis.
TIM vRtrDHCP6MsgStatsLstClrd	1.3.6.1.4.1.6527.3.1.2.3.42.1.2	TimeStamp	read-only	The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
G32 vRtrDHCP6MsgStatsRcvd	1.3.6.1.4.1.6527.3.1.2.3.42.1.3	Gauge32	read-only	The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
G32 vRtrDHCP6MsgStatsSent	1.3.6.1.4.1.6527.3.1.2.3.42.1.4	Gauge32	read-only	The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
G32 vRtrDHCP6MsgStatsDropped	1.3.6.1.4.1.6527.3.1.2.3.42.1.5	Gauge32	read-only	The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
vRtrIfIpcpTable	1.3.6.1.4.1.6527.3.1.2.3.43		not-accessible	The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices.
vRtrIfIpcpEntry	1.3.6.1.4.1.6527.3.1.2.3.43.1		not-accessible	Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
IPt vRtrIfIpcpPeerAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.1	InetAddressType	read-create	The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0.
IP vRtrIfIpcpPeerAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.2	InetAddress	read-create	The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IPt vRtrIfIpcpPriDnsAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.3	InetAddressType	read-create	The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0.
IP vRtrIfIpcpPriDnsAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.4	InetAddress	read-create	The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IPt vRtrIfIpcpSecDnsAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.5	InetAddressType	read-create	The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0.
IP vRtrIfIpcpSecDnsAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.6	InetAddress	read-create	The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
vRtrInetStatRteCpeChkStatsTable	1.3.6.1.4.1.6527.3.1.2.3.44		not-accessible	The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects.
vRtrInetStatRteCpeChkStatsEntry	1.3.6.1.4.1.6527.3.1.2.3.44.1		not-accessible	Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations.
TIK vRtrInetStatRteCpeChkUpTime	1.3.6.1.4.1.6527.3.1.2.3.44.1.1	TimeTicks	read-only	The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available.
C32 vRtrInetStatRteCpeChkInPktCnt	1.3.6.1.4.1.6527.3.1.2.3.44.1.2	Counter32	read-only	The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received.
C32 vRtrInetStatRteCpeChkOutPktCnt	1.3.6.1.4.1.6527.3.1.2.3.44.1.3	Counter32	read-only	The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent.
G32 vRtrInetStatRteCpeChkDownTrans	1.3.6.1.4.1.6527.3.1.2.3.44.1.4	Gauge32	read-only	The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state.
G32 vRtrInetStatRteCpeChkUpTrans	1.3.6.1.4.1.6527.3.1.2.3.44.1.5	Gauge32	read-only	The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state.
U32 vRtrInetStatRteCpeChkTTL	1.3.6.1.4.1.6527.3.1.2.3.44.1.6	Unsigned32	read-only	The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second.
TIM tmnxDscpAppTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.45	TimeStamp	read-only	The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDscpAppTable	1.3.6.1.4.1.6527.3.1.2.3.46		not-accessible	The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system.
tmnxDscpAppEntry	1.3.6.1.4.1.6527.3.1.2.3.46.1		not-accessible	Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization.
TDS tmnxDscpAppId	1.3.6.1.4.1.6527.3.1.2.3.46.1.1	TDSCPAppId	not-accessible	The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel 7x50 SR router which generates control traffic over IP.
TIM tmnxDscpAppLastChanged	1.3.6.1.4.1.6527.3.1.2.3.46.1.2	TimeStamp	read-only	The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TDS tmnxDscpAppDscpValue	1.3.6.1.4.1.6527.3.1.2.3.46.1.3	TDSCPValueOrNone	read-write	The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific.
TIM tmnxDscpFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.47	TimeStamp	read-only	The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDscpFCTable	1.3.6.1.4.1.6527.3.1.2.3.48		not-accessible	The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system.
tmnxDscpFCEntry	1.3.6.1.4.1.6527.3.1.2.3.48.1		not-accessible	Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization.
TDS tmnxDscpFCDscpValue	1.3.6.1.4.1.6527.3.1.2.3.48.1.1	TDSCPValue	not-accessible	The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue.
TIM tmnxDscpFCLastChanged	1.3.6.1.4.1.6527.3.1.2.3.48.1.3	TimeStamp	read-only	The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFC tmnxDscpFCValue	1.3.6.1.4.1.6527.3.1.2.3.48.1.4	TFCType	read-write	The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0.
TIM tmnxDot1pAppTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.49	TimeStamp	read-only	The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxDot1pAppTable	1.3.6.1.4.1.6527.3.1.2.3.50		not-accessible	The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system.
tmnxDot1pAppEntry	1.3.6.1.4.1.6527.3.1.2.3.50.1		not-accessible	Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization.
TDO tmnxDot1pAppId	1.3.6.1.4.1.6527.3.1.2.3.50.1.1	TDot1pAppId	not-accessible	The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel 7x50 SR router.
TIM tmnxDot1pAppLastChanged	1.3.6.1.4.1.6527.3.1.2.3.50.1.2	TimeStamp	read-only	The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
DOT tmnxDot1pAppValue	1.3.6.1.4.1.6527.3.1.2.3.50.1.3	Dot1PPriority	read-write	The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific.
tmnxVRtrNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.3
tmnxVRtrNotifications	1.3.6.1.4.1.6527.3.1.3.3.0
NTF tmnxVRtrMidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.1			The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrHighRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.2			The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrHighRouteCleared	1.3.6.1.4.1.6527.3.1.3.3.0.3			The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification.
NTF tmnxVRtrIllegalLabelTCA	1.3.6.1.4.1.6527.3.1.3.3.0.4			The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold.
NTF tmnxVRtrMcastMidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.5			The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrMcastMaxRoutesTCA	1.3.6.1.4.1.6527.3.1.3.3.0.6			The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrMcastMaxRoutesCleared	1.3.6.1.4.1.6527.3.1.3.3.0.7			The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification.
NTF tmnxVRtrMaxArpEntriesTCA	1.3.6.1.4.1.6527.3.1.3.3.0.8			The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported.
NTF tmnxVRtrMaxArpEntriesCleared	1.3.6.1.4.1.6527.3.1.3.3.0.9			The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification.
NTF tmnxVRtrDHCPAFEntriesExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.10			The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter.
NTF tmnxVRtrMaxRoutes	1.3.6.1.4.1.6527.3.1.3.3.0.11			The tmnxVRtrMaxRoutes notification is generated when the number of routes contained in a VPRN reaches the value specified by vRtrMaxNumRoutes.
NTF tmnxVRtrDHCPLseStsExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.12			The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit.
NTF tmnxVRtrDHCPLeaseStateOverride	1.3.6.1.4.1.6527.3.1.3.3.0.13			The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
NTF tmnxVRtrDHCPSuspiciousPcktRcvd	1.3.6.1.4.1.6527.3.1.3.3.0.14			The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
NTF tmnxVRtrDHCPLseStRestoreProblem	1.3.6.1.4.1.6527.3.1.3.3.0.15			The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record.
NTF tmnxVRtrDHCPLseStatePopulateErr	1.3.6.1.4.1.6527.3.1.3.3.0.16			The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
NTF tmnxVRtrBfdSessionDown	1.3.6.1.4.1.6527.3.1.3.3.0.17			The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down.
NTF tmnxVRtrBfdMaxSessionOnSlot	1.3.6.1.4.1.6527.3.1.3.3.0.18			The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'.
NTF tmnxVRtrBfdPortTypeNotSupported	1.3.6.1.4.1.6527.3.1.3.3.0.19			The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'.
NTF tmnxVRtrDHCPIfLseStatesExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.20			The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate.
NTF tmnxVRtrDHCP6RelayLseStExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.21			The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate.
NTF tmnxVRtrDHCP6ServerLseStExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.22			The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates.
NTF tmnxVRtrDHCP6LseStateOverride	1.3.6.1.4.1.6527.3.1.3.3.0.23			The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length.
NTF tmnxVRtrDHCP6RelayReplyStripUni	1.3.6.1.4.1.6527.3.1.3.3.0.24			The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message.
NTF tmnxVRtrDHCP6IllegalClientAddr	1.3.6.1.4.1.6527.3.1.3.3.0.25			The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface.
NTF tmnxVRtrDHCP6AssignedIllegSubnet	1.3.6.1.4.1.6527.3.1.3.3.0.26			The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface.
NTF tmnxVRtrDHCP6ClientMacUnresolved	1.3.6.1.4.1.6527.3.1.3.3.0.27			The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet.
NTF tmnxVRtrBfdSessionUp	1.3.6.1.4.1.6527.3.1.3.3.0.28			The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up.
NTF tmnxVRtrIPv6MidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.29			The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
NTF tmnxVRtrIPv6HighRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.30			The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
NTF tmnxVRtrIPv6HighRouteCleared	1.3.6.1.4.1.6527.3.1.3.3.0.31			The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification.
NTF tmnxVRtrStaticRouteCPEStatus	1.3.6.1.4.1.6527.3.1.3.3.0.32			The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable.
NTF tmnxVRtrBfdSessionDeleted	1.3.6.1.4.1.6527.3.1.3.3.0.33			The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted.
NTF tmnxVRtrBfdSessionProtChange	1.3.6.1.4.1.6527.3.1.3.3.0.34			The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session.
NTF tmnxVRtrManagedRouteAddFailed	1.3.6.1.4.1.6527.3.1.3.3.0.35			The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed.

Bits (8)
BIT vRtrBfdMaxSessionReason	1.3.6.1.4.1.6527.3.1.2.3.21.16	Bits	accessible-for-notify	The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
BIT vRtrIfBfdSessionOperFlags	1.3.6.1.4.1.6527.3.1.2.3.34.1.7	Bits	read-only	The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up.
BIT vRtrIfBfdSessionProtocols	1.3.6.1.4.1.6527.3.1.2.3.34.1.16	Bits	read-only	The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session.
BIT vRtrIfDHCPClientApplications	1.3.6.1.4.1.6527.3.1.2.3.19.1.36	Bits	read-create	The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface.
BIT vRtrIfDHCPVendorIncludeOptions	1.3.6.1.4.1.6527.3.1.2.3.19.1.32	Bits	read-create	The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'.
BIT vRtrIfProtocol	1.3.6.1.4.1.6527.3.1.2.3.4.1.35	Bits	read-only	The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.
BIT vRtrInetStaticRouteIgpShortcut	1.3.6.1.4.1.6527.3.1.2.3.24.1.16	Bits	read-create	The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
BIT vRtrStaticRouteIgpShortcut	1.3.6.1.4.1.6527.3.1.2.3.9.1.15	Bits	read-create	The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
Counter32 (92)
C32 vRtrIcmp6InAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.31.1.4	Counter32	read-only	The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance.
C32 vRtrIcmp6InDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.31.1.3	Counter32	read-only	The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance.
C32 vRtrIcmp6InEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.31.1.9	Counter32	read-only	The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance.
C32 vRtrIcmp6InEchos	1.3.6.1.4.1.6527.3.1.2.3.31.1.8	Counter32	read-only	The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance.
C32 vRtrIcmp6InErrors	1.3.6.1.4.1.6527.3.1.2.3.31.1.2	Counter32	read-only	The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
C32 vRtrIcmp6InGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.31.1.15	Counter32	read-only	The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance.
C32 vRtrIcmp6InGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.31.1.17	Counter32	read-only	The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance.
C32 vRtrIcmp6InGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.31.1.16	Counter32	read-only	The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance.
C32 vRtrIcmp6InMsgs	1.3.6.1.4.1.6527.3.1.2.3.31.1.1	Counter32	read-only	The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors.
C32 vRtrIcmp6InNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.13	Counter32	read-only	The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance.
C32 vRtrIcmp6InNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.12	Counter32	read-only	The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance.
C32 vRtrIcmp6InParmProblems	1.3.6.1.4.1.6527.3.1.2.3.31.1.6	Counter32	read-only	The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance.
C32 vRtrIcmp6InPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.31.1.7	Counter32	read-only	The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance.
C32 vRtrIcmp6InRedirects	1.3.6.1.4.1.6527.3.1.2.3.31.1.14	Counter32	read-only	The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance.
C32 vRtrIcmp6InRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.11	Counter32	read-only	The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance.
C32 vRtrIcmp6InRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.10	Counter32	read-only	The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance.
C32 vRtrIcmp6InTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.31.1.5	Counter32	read-only	The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance.
C32 vRtrIcmp6OutAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.31.1.21	Counter32	read-only	The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance.
C32 vRtrIcmp6OutDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.31.1.20	Counter32	read-only	The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance.
C32 vRtrIcmp6OutEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.31.1.26	Counter32	read-only	The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance.
C32 vRtrIcmp6OutEchos	1.3.6.1.4.1.6527.3.1.2.3.31.1.25	Counter32	read-only	The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance.
C32 vRtrIcmp6OutErrors	1.3.6.1.4.1.6527.3.1.2.3.31.1.19	Counter32	read-only	The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C32 vRtrIcmp6OutGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.31.1.32	Counter32	read-only	The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.31.1.34	Counter32	read-only	The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance.
C32 vRtrIcmp6OutGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.31.1.33	Counter32	read-only	The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance.
C32 vRtrIcmp6OutMsgs	1.3.6.1.4.1.6527.3.1.2.3.31.1.18	Counter32	read-only	The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors.
C32 vRtrIcmp6OutNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.30	Counter32	read-only	The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance.
C32 vRtrIcmp6OutNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.29	Counter32	read-only	The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance.
C32 vRtrIcmp6OutParmProblems	1.3.6.1.4.1.6527.3.1.2.3.31.1.23	Counter32	read-only	The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance.
C32 vRtrIcmp6OutPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.31.1.24	Counter32	read-only	The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance.
C32 vRtrIcmp6OutRedirects	1.3.6.1.4.1.6527.3.1.2.3.31.1.31	Counter32	read-only	The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance.
C32 vRtrIcmp6OutRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.31.1.28	Counter32	read-only	The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance.
C32 vRtrIcmp6OutRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.31.1.27	Counter32	read-only	The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance.
C32 vRtrIcmp6OutTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.31.1.22	Counter32	read-only	The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance.
C32 vRtrIfBfdSessionDownCount	1.3.6.1.4.1.6527.3.1.2.3.34.1.13	Counter32	read-only	The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'.
C32 vRtrIfBfdSessionMesgRecv	1.3.6.1.4.1.6527.3.1.2.3.34.1.8	Counter32	read-only	The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session.
C32 vRtrIfBfdSessionMesgSent	1.3.6.1.4.1.6527.3.1.2.3.34.1.9	Counter32	read-only	The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session.
C32 vRtrIfBfdSessionUpCount	1.3.6.1.4.1.6527.3.1.2.3.34.1.12	Counter32	read-only	The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'.
C32 vRtrIfDHCPRelayAuthPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.9	Counter32	read-only	vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful.
C32 vRtrIfDHCPRelayAuthPktsSuccess	1.3.6.1.4.1.6527.3.1.2.3.20.1.10	Counter32	read-only	vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful.
C32 vRtrIfDHCPRelayClientPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.5	Counter32	read-only	vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsProxLS	1.3.6.1.4.1.6527.3.1.2.3.20.1.14	Counter32	read-only	vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
C32 vRtrIfDHCPRelayClientPktsProxRad	1.3.6.1.4.1.6527.3.1.2.3.20.1.13	Counter32	read-only	vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server.
C32 vRtrIfDHCPRelayClientPktsRelayed	1.3.6.1.4.1.6527.3.1.2.3.20.1.6	Counter32	read-only	vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent.
C32 vRtrIfDHCPRelayClientPktsSnooped	1.3.6.1.4.1.6527.3.1.2.3.20.1.11	Counter32	read-only	vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent.
C32 vRtrIfDHCPRelayPktsGenForceRenew	1.3.6.1.4.1.6527.3.1.2.3.20.1.16	Counter32	read-only	vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients.
C32 vRtrIfDHCPRelayPktsGenRelease	1.3.6.1.4.1.6527.3.1.2.3.20.1.15	Counter32	read-only	vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server.
C32 vRtrIfDHCPRelayRxMalformedPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.3	Counter32	read-only	vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayRxPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.1	Counter32	read-only	vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayRxUntrustedPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.4	Counter32	read-only	vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsDiscarded	1.3.6.1.4.1.6527.3.1.2.3.20.1.7	Counter32	read-only	vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsRelayed	1.3.6.1.4.1.6527.3.1.2.3.20.1.8	Counter32	read-only	vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent.
C32 vRtrIfDHCPRelayServerPktsSnooped	1.3.6.1.4.1.6527.3.1.2.3.20.1.12	Counter32	read-only	vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent.
C32 vRtrIfDHCPRelayTxPkts	1.3.6.1.4.1.6527.3.1.2.3.20.1.2	Counter32	read-only	vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent.
C32 vRtrIfIcmp6InAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.32.1.4	Counter32	read-only	The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface.
C32 vRtrIfIcmp6InDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.32.1.3	Counter32	read-only	The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface.
C32 vRtrIfIcmp6InEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.32.1.9	Counter32	read-only	The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface.
C32 vRtrIfIcmp6InEchos	1.3.6.1.4.1.6527.3.1.2.3.32.1.8	Counter32	read-only	The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface.
C32 vRtrIfIcmp6InErrors	1.3.6.1.4.1.6527.3.1.2.3.32.1.2	Counter32	read-only	The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
C32 vRtrIfIcmp6InGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.32.1.15	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface.
C32 vRtrIfIcmp6InGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.32.1.17	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface.
C32 vRtrIfIcmp6InGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.32.1.16	Counter32	read-only	The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface.
C32 vRtrIfIcmp6InMsgs	1.3.6.1.4.1.6527.3.1.2.3.32.1.1	Counter32	read-only	The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages.
C32 vRtrIfIcmp6InNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.13	Counter32	read-only	The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface.
C32 vRtrIfIcmp6InNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.12	Counter32	read-only	The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface.
C32 vRtrIfIcmp6InParmProblems	1.3.6.1.4.1.6527.3.1.2.3.32.1.6	Counter32	read-only	The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface.
C32 vRtrIfIcmp6InPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.32.1.7	Counter32	read-only	The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface.
C32 vRtrIfIcmp6InRedirects	1.3.6.1.4.1.6527.3.1.2.3.32.1.14	Counter32	read-only	The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface.
C32 vRtrIfIcmp6InRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.11	Counter32	read-only	The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface.
C32 vRtrIfIcmp6InRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.10	Counter32	read-only	The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface.
C32 vRtrIfIcmp6InTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.32.1.5	Counter32	read-only	The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface.
C32 vRtrIfIcmp6OutAdminProhibs	1.3.6.1.4.1.6527.3.1.2.3.32.1.21	Counter32	read-only	The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface.
C32 vRtrIfIcmp6OutDestUnreachs	1.3.6.1.4.1.6527.3.1.2.3.32.1.20	Counter32	read-only	The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface.
C32 vRtrIfIcmp6OutEchoReplies	1.3.6.1.4.1.6527.3.1.2.3.32.1.26	Counter32	read-only	The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface.
C32 vRtrIfIcmp6OutEchos	1.3.6.1.4.1.6527.3.1.2.3.32.1.25	Counter32	read-only	The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface.
C32 vRtrIfIcmp6OutErrors	1.3.6.1.4.1.6527.3.1.2.3.32.1.19	Counter32	read-only	The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C32 vRtrIfIcmp6OutGrpMembQueries	1.3.6.1.4.1.6527.3.1.2.3.32.1.36	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembReductions	1.3.6.1.4.1.6527.3.1.2.3.32.1.38	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface.
C32 vRtrIfIcmp6OutGrpMembResponses	1.3.6.1.4.1.6527.3.1.2.3.32.1.37	Counter32	read-only	The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface.
C32 vRtrIfIcmp6OutMsgs	1.3.6.1.4.1.6527.3.1.2.3.32.1.18	Counter32	read-only	The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors.
C32 vRtrIfIcmp6OutNbrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.33	Counter32	read-only	The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface.
C32 vRtrIfIcmp6OutNbrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.31	Counter32	read-only	The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface.
C32 vRtrIfIcmp6OutParmProblems	1.3.6.1.4.1.6527.3.1.2.3.32.1.23	Counter32	read-only	The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface.
C32 vRtrIfIcmp6OutPktTooBigs	1.3.6.1.4.1.6527.3.1.2.3.32.1.24	Counter32	read-only	The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface.
C32 vRtrIfIcmp6OutRedirects	1.3.6.1.4.1.6527.3.1.2.3.32.1.35	Counter32	read-only	The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface.
C32 vRtrIfIcmp6OutRtrAdvertisements	1.3.6.1.4.1.6527.3.1.2.3.32.1.29	Counter32	read-only	The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface.
C32 vRtrIfIcmp6OutRtrSolicits	1.3.6.1.4.1.6527.3.1.2.3.32.1.27	Counter32	read-only	The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface.
C32 vRtrIfIcmp6OutTimeExcds	1.3.6.1.4.1.6527.3.1.2.3.32.1.22	Counter32	read-only	The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface.
C32 vRtrInetStatRteCpeChkInPktCnt	1.3.6.1.4.1.6527.3.1.2.3.44.1.2	Counter32	read-only	The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received.
C32 vRtrInetStatRteCpeChkOutPktCnt	1.3.6.1.4.1.6527.3.1.2.3.44.1.3	Counter32	read-only	The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent.
C32 vRtrStatIllegalLabels	1.3.6.1.4.1.6527.3.1.2.3.2.1.18	Counter32	read-only	vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.
C32 vRtrV6StatIllegalLabels	1.3.6.1.4.1.6527.3.1.2.3.2.1.45	Counter32	read-only	vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.
DisplayString (12)
STR vRtrDHCP6LeaseOverrideResult	1.3.6.1.4.1.6527.3.1.2.3.21.29	DisplayString	accessible-for-notify	The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden.
STR vRtrDhcpLseStatePopulateError	1.3.6.1.4.1.6527.3.1.2.3.21.13	DisplayString	accessible-for-notify	The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message.
STR vRtrDhcpPacketProblem	1.3.6.1.4.1.6527.3.1.2.3.21.12	DisplayString	accessible-for-notify	The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system.
STR vRtrDhcpRestoreLseStateProblem	1.3.6.1.4.1.6527.3.1.2.3.21.11	DisplayString	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored.
STR vRtrFailureDescription	1.3.6.1.4.1.6527.3.1.2.3.21.36	DisplayString	accessible-for-notify	The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent.
STR vRtrIfAlias	1.3.6.1.4.1.6527.3.1.2.3.4.1.10	DisplayString	read-create	An alternative administrative name assigned this router interface.
STR vRtrIfDHCP6ItfIdString	1.3.6.1.4.1.6527.3.1.2.3.36.1.22	DisplayString	read-create	The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4).
STR vRtrIfDHCPRelayRemoteIdStr	1.3.6.1.4.1.6527.3.1.2.3.19.1.27	DisplayString	read-create	The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'.
STR vRtrIfDHCPVendorOptionString	1.3.6.1.4.1.6527.3.1.2.3.19.1.33	DisplayString	read-create	The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'.
STR vRtrIfUnnumberedIf	1.3.6.1.4.1.6527.3.1.2.3.4.1.31	DisplayString	read-create	The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.
STR vRtrInetStaticRouteNextHopIf	1.3.6.1.4.1.6527.3.1.2.3.24.1.14	DisplayString	read-create	The value of vRtrInetStaticRouteNextHopIf specifies the interface of the next hop for the static route. The name of the Interface which will be the nexthop for this route. This member is complemented by vRtrInetStaticRouteNextHop. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
STR vRtrStaticRouteNextHopUnnumberedIf	1.3.6.1.4.1.6527.3.1.2.3.9.1.13	DisplayString	read-create	The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
Dot1PPriority (1)
DOT tmnxDot1pAppValue	1.3.6.1.4.1.6527.3.1.2.3.50.1.3	Dot1PPriority	read-write	The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific.
Gauge32 (78)
G32 vRtrActiveVRtrs	1.3.6.1.4.1.6527.3.1.2.3.15.3	Gauge32	read-only	The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminStatus equal 'inService'.
G32 vRtrAggregateActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.15	Gauge32	read-only	vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.
G32 vRtrAggregateRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.14	Gauge32	read-only	vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.
G32 vRtrBGPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.9	Gauge32	read-only	vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.
G32 vRtrBGPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.8	Gauge32	read-only	vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.
G32 vRtrConfiguredVRtrs	1.3.6.1.4.1.6527.3.1.2.3.15.2	Gauge32	read-only	The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.
G32 vRtrDHCP6DropStatPktsDropped	1.3.6.1.4.1.6527.3.1.2.3.41.1.3	Gauge32	read-only	The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason.
G32 vRtrDHCP6MsgStatsDropped	1.3.6.1.4.1.6527.3.1.2.3.42.1.5	Gauge32	read-only	The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
G32 vRtrDHCP6MsgStatsRcvd	1.3.6.1.4.1.6527.3.1.2.3.42.1.3	Gauge32	read-only	The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
G32 vRtrDHCP6MsgStatsSent	1.3.6.1.4.1.6527.3.1.2.3.42.1.4	Gauge32	read-only	The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
G32 vRtrDirectActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.3	Gauge32	read-only	vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.
G32 vRtrDirectRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.2	Gauge32	read-only	vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.
G32 vRtrHostActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.63	Gauge32	read-only	The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.
G32 vRtrHostRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.62	Gauge32	read-only	The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.
G32 vRtrIfCpmProtUncfgdProtoDropCnt	1.3.6.1.4.1.6527.3.1.2.3.4.1.69	Gauge32	read-only	The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
G32 vRtrInetStatRteCpeChkDownTrans	1.3.6.1.4.1.6527.3.1.2.3.44.1.4	Gauge32	read-only	The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state.
G32 vRtrInetStatRteCpeChkUpTrans	1.3.6.1.4.1.6527.3.1.2.3.44.1.5	Gauge32	read-only	The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state.
G32 vRtrISISActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.11	Gauge32	read-only	vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.
G32 vRtrISISRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.10	Gauge32	read-only	vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.
G32 vRtrManagedActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.72	Gauge32	read-only	The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.
G32 vRtrManagedRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.71	Gauge32	read-only	The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.
G32 vRtrMulticastRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.26	Gauge32	read-only	vRtrMulticastRoutes indicates the current number of rows in the vRtrPimGrpSrcTable.
G32 vRtrOSPFActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.7	Gauge32	read-only	vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.
G32 vRtrOSPFRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.6	Gauge32	read-only	vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.
G32 vRtrRIPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.13	Gauge32	read-only	vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.
G32 vRtrRIPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.12	Gauge32	read-only	vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.
G32 vRtrStatActiveARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.27	Gauge32	read-only	vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.
G32 vRtrStatActiveIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.17	Gauge32	read-only	vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
G32 vRtrStatActiveLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.24	Gauge32	read-only	vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrStatActiveRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.59	Gauge32	read-only	The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrStatActiveSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.25	Gauge32	read-only	vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrStatBGPVpnActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.21	Gauge32	read-only	vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatBGPVpnRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.20	Gauge32	read-only	vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatConfiguredIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.16	Gauge32	read-only	vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.
G32 vRtrStatCurrNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.19	Gauge32	read-only	vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.
G32 vRtrStatDynamicARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.68	Gauge32	read-only	The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.
G32 vRtrStaticActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.5	Gauge32	read-only	vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.
G32 vRtrStaticRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.4	Gauge32	read-only	vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.
G32 vRtrStatInternalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.70	Gauge32	read-only	The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.
G32 vRtrStatLocalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.66	Gauge32	read-only	The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.
G32 vRtrStatManagedARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.69	Gauge32	read-only	The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.
G32 vRtrStatStaticARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.67	Gauge32	read-only	The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.
G32 vRtrStatTotalARPEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.28	Gauge32	read-only	vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.
G32 vRtrStatTotalLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.22	Gauge32	read-only	vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.
G32 vRtrStatTotalRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.58	Gauge32	read-only	The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.
G32 vRtrStatTotalSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.23	Gauge32	read-only	vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.
G32 vRtrSubMgmtActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.57	Gauge32	read-only	The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.
G32 vRtrSubMgmtRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.56	Gauge32	read-only	The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.
G32 vRtrV6AggregateActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.42	Gauge32	read-only	vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.
G32 vRtrV6AggregateRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.41	Gauge32	read-only	vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.
G32 vRtrV6BGPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.36	Gauge32	read-only	vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.
G32 vRtrV6BGPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.35	Gauge32	read-only	vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.
G32 vRtrV6DirectActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.30	Gauge32	read-only	vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.
G32 vRtrV6DirectRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.29	Gauge32	read-only	vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.
G32 vRtrV6HostActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.65	Gauge32	read-only	The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6HostRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.64	Gauge32	read-only	The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6ISISActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.38	Gauge32	read-only	vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.
G32 vRtrV6ISISRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.37	Gauge32	read-only	vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.
G32 vRtrV6MulticastRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.53	Gauge32	read-only	vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimGrpSrcTable.
G32 vRtrV6OSPFActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.34	Gauge32	read-only	vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.
G32 vRtrV6OSPFRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.33	Gauge32	read-only	vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.
G32 vRtrV6RIPActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.40	Gauge32	read-only	vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.
G32 vRtrV6RIPRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.39	Gauge32	read-only	vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.
G32 vRtrV6StatActiveIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.44	Gauge32	read-only	vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
G32 vRtrV6StatActiveLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.51	Gauge32	read-only	vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrV6StatActiveNbrEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.54	Gauge32	read-only	vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatActiveRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.61	Gauge32	read-only	The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrV6StatActiveSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.52	Gauge32	read-only	vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrV6StatBGPVpnActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.48	Gauge32	read-only	vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatBGPVpnRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.47	Gauge32	read-only	vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatConfiguredIfs	1.3.6.1.4.1.6527.3.1.2.3.2.1.43	Gauge32	read-only	vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.
G32 vRtrV6StatCurrNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.46	Gauge32	read-only	vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.
G32 vRtrV6StaticActiveRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.32	Gauge32	read-only	vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.
G32 vRtrV6StaticRoutes	1.3.6.1.4.1.6527.3.1.2.3.2.1.31	Gauge32	read-only	vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.
G32 vRtrV6StatTotalLdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.49	Gauge32	read-only	vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.
G32 vRtrV6StatTotalNbrEntries	1.3.6.1.4.1.6527.3.1.2.3.2.1.55	Gauge32	read-only	vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatTotalRsvpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.60	Gauge32	read-only	The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.
G32 vRtrV6StatTotalSdpTunnels	1.3.6.1.4.1.6527.3.1.2.3.2.1.50	Gauge32	read-only	vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.
InetAddress (23)
IP vRiaInetAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.9	InetAddress	read-create	The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.
IP vRiaInetGwAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.15	InetAddress	read-create	The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.
IP vRiaInetOperAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.13	InetAddress	read-only	The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.
IP vRiaInetRemoteIp	1.3.6.1.4.1.6527.3.1.2.3.6.1.17	InetAddress	read-create	The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.
IP vRtrAdvPrefixPrefix	1.3.6.1.4.1.6527.3.1.2.3.23.1.2	InetAddress	not-accessible	The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes.
IP vRtrDHCP6AssignedNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.22	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client.
IP vRtrDHCP6ClientNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.20	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client.
IP vRtrDHCP6OldAssignedNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.25	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client.
IP vRtrDHCP6ServerNetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.18	InetAddress	accessible-for-notify	The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server.
IP vRtrIfBfdSessionLclAddr	1.3.6.1.4.1.6527.3.1.2.3.34.1.2	InetAddress	not-accessible	The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType.
IP vRtrIfBfdSessionRemAddr	1.3.6.1.4.1.6527.3.1.2.3.34.1.4	InetAddress	not-accessible	The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType.
IP vRtrIfDHCPGiAddress	1.3.6.1.4.1.6527.3.1.2.3.19.1.24	InetAddress	read-create	The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType.
IP vRtrIfIpcpPeerAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.2	InetAddress	read-create	The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IP vRtrIfIpcpPriDnsAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.4	InetAddress	read-create	The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IP vRtrIfIpcpSecDnsAddr	1.3.6.1.4.1.6527.3.1.2.3.43.1.6	InetAddress	read-create	The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
IP vRtrIfLinkLocalAddress	1.3.6.1.4.1.6527.3.1.2.3.4.1.59	InetAddress	read-only	The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.
IP vRtrInetAggrIpPrefix	1.3.6.1.4.1.6527.3.1.2.3.27.1.2	InetAddress	not-accessible	The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation.
IP vRtrInetStaticRouteCpeAddr	1.3.6.1.4.1.6527.3.1.2.3.24.1.21	InetAddress	read-create	The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
IP vRtrInetStaticRouteDest	1.3.6.1.4.1.6527.3.1.2.3.24.1.2	InetAddress	not-accessible	The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route.
IP vRtrInetStaticRouteNextHop	1.3.6.1.4.1.6527.3.1.2.3.24.1.13	InetAddress	read-create	The value of vRtrInetStaticRouteNextHop specifies the address of the next hop for the static route. In case of remote routes, the address of the next system en route. This member is complemented by vRtrInetStaticRouteNextHopIf. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
IP vRtrInetStatRteCpeNotifyAddr	1.3.6.1.4.1.6527.3.1.2.3.21.31	InetAddress	accessible-for-notify	The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE.
IP vRtrInetSvcIpRangeAddr	1.3.6.1.4.1.6527.3.1.2.3.28.1.2	InetAddress	not-accessible	The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType.
IP vRtrManagedRouteInetAddr	1.3.6.1.4.1.6527.3.1.2.3.21.34	InetAddress	accessible-for-notify	The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route.
InetAddressIPv6 (2)
ADR vRtrIfDHCP6PfxdPrefix	1.3.6.1.4.1.6527.3.1.2.3.40.1.1	InetAddressIPv6	not-accessible	The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated.
ADR vRtrIfDHCP6SourceAddress	1.3.6.1.4.1.6527.3.1.2.3.36.1.16	InetAddressIPv6	read-create	The value of the object vRtrIfDHCP6SourceAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system Ipv6 address is taken.
InetAddressIPv6z (8)
ADR vRtrIfDHCP6RelayServer1	1.3.6.1.4.1.6527.3.1.2.3.36.1.5	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer2	1.3.6.1.4.1.6527.3.1.2.3.36.1.6	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer3	1.3.6.1.4.1.6527.3.1.2.3.36.1.7	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer4	1.3.6.1.4.1.6527.3.1.2.3.36.1.8	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer5	1.3.6.1.4.1.6527.3.1.2.3.36.1.9	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer6	1.3.6.1.4.1.6527.3.1.2.3.36.1.10	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer7	1.3.6.1.4.1.6527.3.1.2.3.36.1.11	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to.
ADR vRtrIfDHCP6RelayServer8	1.3.6.1.4.1.6527.3.1.2.3.36.1.12	InetAddressIPv6z	read-create	The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to.
InetAddressPrefixLength (9)
ADR vRiaInetPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.6.1.10	InetAddressPrefixLength	read-create	The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.
ADR vRtrAdvPrefixLength	1.3.6.1.4.1.6527.3.1.2.3.23.1.3	InetAddressPrefixLength	not-accessible	The prefix length associated with this prefix. The value 0 has no special meaning for this object.
ADR vRtrDHCP6AssignedPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.23	InetAddressPrefixLength	accessible-for-notify	The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr.
ADR vRtrDHCP6OldAssignedPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.26	InetAddressPrefixLength	accessible-for-notify	The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr.
ADR vRtrIfDHCP6PfxdPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.40.1.2	InetAddressPrefixLength	not-accessible	The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system.
ADR vRtrInetAggrIpPrefixLen	1.3.6.1.4.1.6527.3.1.2.3.27.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation.
ADR vRtrInetStaticRouteDestPfxLen	1.3.6.1.4.1.6527.3.1.2.3.24.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address.
ADR vRtrInetSvcIpRangePfxLen	1.3.6.1.4.1.6527.3.1.2.3.28.1.3	InetAddressPrefixLength	not-accessible	The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range.
ADR vRtrManagedRoutePrefixLen	1.3.6.1.4.1.6527.3.1.2.3.21.35	InetAddressPrefixLength	accessible-for-notify	The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr.
InetAddressType (21)
IPt vRiaInetAddressType	1.3.6.1.4.1.6527.3.1.2.3.6.1.8	InetAddressType	read-create	vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.
IPt vRiaInetGwAddressType	1.3.6.1.4.1.6527.3.1.2.3.6.1.14	InetAddressType	read-create	The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.
IPt vRiaInetRemoteIpType	1.3.6.1.4.1.6527.3.1.2.3.6.1.16	InetAddressType	read-create	The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.
IPt vRtrDHCP6AssignedNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.21	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr.
IPt vRtrDHCP6ClientNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.19	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr.
IPt vRtrDHCP6OldAssignedNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.24	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr.
IPt vRtrDHCP6ServerNetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.17	InetAddressType	accessible-for-notify	The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr.
IPt vRtrIfBfdSessionLclAddrType	1.3.6.1.4.1.6527.3.1.2.3.34.1.1	InetAddressType	not-accessible	The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr.
IPt vRtrIfBfdSessionRemAddrType	1.3.6.1.4.1.6527.3.1.2.3.34.1.3	InetAddressType	not-accessible	The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr.
IPt vRtrIfDHCPGiAddressType	1.3.6.1.4.1.6527.3.1.2.3.19.1.23	InetAddressType	read-create	The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address.
IPt vRtrIfIpcpPeerAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.1	InetAddressType	read-create	The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0.
IPt vRtrIfIpcpPriDnsAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.3	InetAddressType	read-create	The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0.
IPt vRtrIfIpcpSecDnsAddrType	1.3.6.1.4.1.6527.3.1.2.3.43.1.5	InetAddressType	read-create	The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0.
IPt vRtrIfLinkLocalAddressType	1.3.6.1.4.1.6527.3.1.2.3.4.1.58	InetAddressType	read-only	The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.
IPt vRtrInetAggrIpPrefixType	1.3.6.1.4.1.6527.3.1.2.3.27.1.1	InetAddressType	not-accessible	The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix.
IPt vRtrInetStaticRouteCpeAddrType	1.3.6.1.4.1.6527.3.1.2.3.24.1.20	InetAddressType	read-create	The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
IPt vRtrInetStaticRouteDestType	1.3.6.1.4.1.6527.3.1.2.3.24.1.1	InetAddressType	not-accessible	The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address.
IPt vRtrInetStaticRouteNextHopType	1.3.6.1.4.1.6527.3.1.2.3.24.1.12	InetAddressType	read-create	The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address.
IPt vRtrInetStatRteCpeNotifyAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.30	InetAddressType	accessible-for-notify	The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr.
IPt vRtrInetSvcIpRangeAddrType	1.3.6.1.4.1.6527.3.1.2.3.28.1.1	InetAddressType	not-accessible	The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr.
IPt vRtrManagedRouteInetAddrType	1.3.6.1.4.1.6527.3.1.2.3.21.33	InetAddressType	accessible-for-notify	The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr.
INTEGER (28)
INT vRiaBcastAddrFormat	1.3.6.1.4.1.6527.3.1.2.3.6.1.5	INTEGER	read-create	When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255.
INT vRiaIndex	1.3.6.1.4.1.6527.3.1.2.3.6.1.1	INTEGER	not-accessible	The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted.
INT vRiaReasmMaxSize	1.3.6.1.4.1.6527.3.1.2.3.6.1.6	INTEGER	read-create	The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.
INT vRtrDHCP6DropStatReason	1.3.6.1.4.1.6527.3.1.2.3.41.1.1	INTEGER	not-accessible	The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option
INT vRtrGracefulRestartType	1.3.6.1.4.1.6527.3.1.2.3.1.1.27	INTEGER	read-create	The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover
INT vRtrIfArpPopulate	1.3.6.1.4.1.6527.3.1.2.3.4.1.38	INTEGER	read-create	The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.
INT vRtrIfBfdSessionState	1.3.6.1.4.1.6527.3.1.2.3.34.1.6	INTEGER	read-only	The value of vRtrIfBfdSessionState indicates the state of the BFD protocl on this interface.
INT vRtrIfBfdSessionType	1.3.6.1.4.1.6527.3.1.2.3.34.1.19	INTEGER	read-only	The value of vRtrIfBfdSessionType indicates if the bfd session is running on IOM or CPM.
INT vRtrIfCflowd	1.3.6.1.4.1.6527.3.1.2.3.4.1.32	INTEGER	read-create	The value of vRtrIfCflowd specifies the type of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of none (1) indicates that there is no Cflowd analysis associated with this interface.
INT vRtrIfDHCP6OperState	1.3.6.1.4.1.6527.3.1.2.3.36.1.3	INTEGER	read-only	The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node.
INT vRtrIfDHCP6PfxdAdminState	1.3.6.1.4.1.6527.3.1.2.3.36.1.19	INTEGER	read-create	The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system.
INT vRtrIfDHCP6RelayItfIdOption	1.3.6.1.4.1.6527.3.1.2.3.36.1.13	INTEGER	read-create	The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used.
INT vRtrIfDHCPRelayCircuitId	1.3.6.1.4.1.6527.3.1.2.3.19.1.3	INTEGER	read-create	The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
INT vRtrIfDHCPRelayInfoAction	1.3.6.1.4.1.6527.3.1.2.3.19.1.2	INTEGER	read-create	vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information.
INT vRtrIfDHCPRelayRemoteId	1.3.6.1.4.1.6527.3.1.2.3.19.1.4	INTEGER	read-create	The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id.
INT vRtrIfDHCPSnooping	1.3.6.1.4.1.6527.3.1.2.3.19.1.16	INTEGER	read-create	vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface.
INT vRtrIfTotalNumber	1.3.6.1.4.1.6527.3.1.2.3.3	INTEGER	read-only	The number of router interfaces configured in this system.
INT vRtrIfType	1.3.6.1.4.1.6527.3.1.2.3.4.1.3	INTEGER	read-create	The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror.
INT vRtrIfVPNClass	1.3.6.1.4.1.6527.3.1.2.3.4.1.33	INTEGER	read-only	The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface.
INT vRtrInetStaticRouteCpeStatus	1.3.6.1.4.1.6527.3.1.2.3.21.32	INTEGER	accessible-for-notify	The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'.
INT vRtrInetStaticRouteIndex	1.3.6.1.4.1.6527.3.1.2.3.24.1.4	INTEGER	not-accessible	The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
INT vRtrInetStaticRouteStaticType	1.3.6.1.4.1.6527.3.1.2.3.24.1.8	INTEGER	read-create	The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry.
INT vRtrInetStaticRouteStatus	1.3.6.1.4.1.6527.3.1.2.3.24.1.7	INTEGER	read-only	The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
INT vRtrStaticRouteIndex	1.3.6.1.4.1.6527.3.1.2.3.9.1.3	INTEGER	read-only	The quaternary index for the vRtrStaticRouteTable.
INT vRtrStaticRouteStaticType	1.3.6.1.4.1.6527.3.1.2.3.9.1.7	INTEGER	read-create	The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry.
INT vRtrStaticRouteStatus	1.3.6.1.4.1.6527.3.1.2.3.9.1.6	INTEGER	read-only	The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
INT vRtrType	1.3.6.1.4.1.6527.3.1.2.3.1.1.28	INTEGER	read-create	The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.
INT vRtrVprnType	1.3.6.1.4.1.6527.3.1.2.3.1.1.43	INTEGER	read-create	The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.
Integer32 (6)
I32 vRtrDHCPClientLease	1.3.6.1.4.1.6527.3.1.2.3.21.3	Integer32	accessible-for-notify	The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap.
I32 vRtrIfDelayUpTimer	1.3.6.1.4.1.6527.3.1.2.3.4.1.65	Integer32	read-only	The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.
I32 vRtrIPv6MaxNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.46	Integer32	read-create	The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
I32 vRtrMaxMcastNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.37	Integer32	read-create	The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.
I32 vRtrMaxNumRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.5	Integer32	read-create	The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.
I32 vRtrTunnelAge	1.3.6.1.4.1.6527.3.1.2.3.17.1.8	Integer32	read-only	The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel.
InterfaceIndex (5)
NUM vRtrAdvPrefixIfIndex	1.3.6.1.4.1.6527.3.1.2.3.23.1.1	InterfaceIndex	not-accessible	The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
NUM vRtrDhcpRestoreLseStateIfIndex	1.3.6.1.4.1.6527.3.1.2.3.21.10	InterfaceIndex	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap.
NUM vRtrIfGlobalIndexvRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.37.1.2	InterfaceIndex	read-only	The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
NUM vRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.4.1.1	InterfaceIndex	accessible-for-notify	The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
NUM vRtrIfNameIndex	1.3.6.1.4.1.6527.3.1.2.3.5.1.1	InterfaceIndex	read-only	The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.
InterfaceIndexOrZero (2)
NUM vRtrInetStaticRouteEgressIfIndex	1.3.6.1.4.1.6527.3.1.2.3.24.1.11	InterfaceIndexOrZero	read-only	The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
NUM vRtrStaticRouteEgressIfIndex	1.3.6.1.4.1.6527.3.1.2.3.9.1.11	InterfaceIndexOrZero	read-only	The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
IpAddress (30)
IP vRiaIpAddress	1.3.6.1.4.1.6527.3.1.2.3.6.1.3	IpAddress	read-create	The IP address assigned to a router's interface.
IP vRiaNetMask	1.3.6.1.4.1.6527.3.1.2.3.6.1.4	IpAddress	read-create	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
IP vRtrAggregationAggregatorIPAddr	1.3.6.1.4.1.6527.3.1.2.3.13.1.8	IpAddress	read-create	When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
IP vRtrAggregationIpPrefix	1.3.6.1.4.1.6527.3.1.2.3.13.1.1	IpAddress	not-accessible	IP address prefix to match for the aggregation.
IP vRtrAutoFilterDHCPClientAddress	1.3.6.1.4.1.6527.3.1.2.3.21.1	IpAddress	accessible-for-notify	The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address.
IP vRtrDhcpLseStateNewCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.6	IpAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap.
IP vRtrDhcpLseStateOldCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.4	IpAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state.
IP vRtrDhcpRestoreLseStateCiAddr	1.3.6.1.4.1.6527.3.1.2.3.21.8	IpAddress	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap.
IP vRtrIfDHCPLseStateCiAddr	1.3.6.1.4.1.6527.3.1.2.3.22.1.1	IpAddress	not-accessible	The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state.
IP vRtrIfDHCPProxyServerAddr	1.3.6.1.4.1.6527.3.1.2.3.19.1.29	IpAddress	read-create	The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server.
IP vRtrIfDHCPRelayServer1	1.3.6.1.4.1.6527.3.1.2.3.19.1.6	IpAddress	read-create	vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer2	1.3.6.1.4.1.6527.3.1.2.3.19.1.7	IpAddress	read-create	vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer3	1.3.6.1.4.1.6527.3.1.2.3.19.1.8	IpAddress	read-create	vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer4	1.3.6.1.4.1.6527.3.1.2.3.19.1.9	IpAddress	read-create	vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer5	1.3.6.1.4.1.6527.3.1.2.3.19.1.10	IpAddress	read-create	vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer6	1.3.6.1.4.1.6527.3.1.2.3.19.1.11	IpAddress	read-create	vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer7	1.3.6.1.4.1.6527.3.1.2.3.19.1.12	IpAddress	read-create	vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded.
IP vRtrIfDHCPRelayServer8	1.3.6.1.4.1.6527.3.1.2.3.19.1.13	IpAddress	read-create	vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded.
IP vRtrIfUnnumbered	1.3.6.1.4.1.6527.3.1.2.3.4.1.24	IpAddress	read-create	The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.
IP vRtrInetAggrAggregatorIPAddr	1.3.6.1.4.1.6527.3.1.2.3.27.1.9	IpAddress	read-create	The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
IP vRtrRouterId	1.3.6.1.4.1.6527.3.1.2.3.1.1.16	IpAddress	read-create	A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
IP vRtrStaticRouteDest	1.3.6.1.4.1.6527.3.1.2.3.9.1.1	IpAddress	read-only	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
IP vRtrStaticRouteIndexDest	1.3.6.1.4.1.6527.3.1.2.3.14.1.1	IpAddress	read-only	The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
IP vRtrStaticRouteIndexMask	1.3.6.1.4.1.6527.3.1.2.3.14.1.2	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
IP vRtrStaticRouteMask	1.3.6.1.4.1.6527.3.1.2.3.9.1.2	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
IP vRtrStaticRouteNextHop	1.3.6.1.4.1.6527.3.1.2.3.9.1.12	IpAddress	read-create	In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
IP vRtrSvcIpRangeAddress	1.3.6.1.4.1.6527.3.1.2.3.10.1.1	IpAddress	not-accessible	The IP address prefix range assigned to a router's service interface.
IP vRtrTunnelDest	1.3.6.1.4.1.6527.3.1.2.3.17.1.1	IpAddress	not-accessible	vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x.
IP vRtrTunnelMask	1.3.6.1.4.1.6527.3.1.2.3.17.1.2	IpAddress	not-accessible	vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
IP vRtrTunnelNexthop	1.3.6.1.4.1.6527.3.1.2.3.17.1.6	IpAddress	not-accessible	The address of the next system en route; Otherwise, 0.0.0.0.
IpAddressPrefixLength (1)
ADR vRtrAggregationIpPrefixMask	1.3.6.1.4.1.6527.3.1.2.3.13.1.2	IpAddressPrefixLength	not-accessible	Mask length for vRtrAggregationIpPrefix, to match for the aggregation.
MacAddress (5)
MAC vRtrDhcpLseStateNewChAddr	1.3.6.1.4.1.6527.3.1.2.3.21.7	MacAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap.
MAC vRtrDhcpLseStateOldChAddr	1.3.6.1.4.1.6527.3.1.2.3.21.5	MacAddress	accessible-for-notify	The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state.
MAC vRtrIfDHCPAntiSpoofMacAddr	1.3.6.1.4.1.6527.3.1.2.3.19.1.35	MacAddress	read-create	The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'.
MAC vRtrIfDHCPLseStateChAddr	1.3.6.1.4.1.6527.3.1.2.3.22.1.2	MacAddress	read-only	The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state.
MAC vRtrIfPhysicalAddress	1.3.6.1.4.1.6527.3.1.2.3.4.1.11	MacAddress	read-create	The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
OCTET STRING (4)
OCT vRtrDHCP6NewClientId	1.3.6.1.4.1.6527.3.1.2.3.21.27	OCTET STRING	accessible-for-notify	The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID).
OCT vRtrDHCP6OldClientId	1.3.6.1.4.1.6527.3.1.2.3.21.28	OCTET STRING	accessible-for-notify	The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID).
OCT vRtrIfDHCP6PfxdDUID	1.3.6.1.4.1.6527.3.1.2.3.40.1.6	OCTET STRING	read-create	The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router.
OCT vRtrIfDHCPLseStateOption82	1.3.6.1.4.1.6527.3.1.2.3.22.1.4	OCTET STRING	read-only	vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state.
RowStatus (11)
ROW vRiaRowStatus	1.3.6.1.4.1.6527.3.1.2.3.6.1.2	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.
ROW vRtrAdvPrefixRowStatus	1.3.6.1.4.1.6527.3.1.2.3.23.1.4	RowStatus	read-create	The row status used for creation and deletion of router advertisement prefix entries.
ROW vRtrAggregationRowStatus	1.3.6.1.4.1.6527.3.1.2.3.13.1.3	RowStatus	read-create	Row status for this entry.
ROW vRtrIfDHCP6PfxdRowStatus	1.3.6.1.4.1.6527.3.1.2.3.40.1.3	RowStatus	read-create	The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6).
ROW vRtrIfRowStatus	1.3.6.1.4.1.6527.3.1.2.3.4.1.2	RowStatus	read-create	The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.
ROW vRtrInetAggrRowStatus	1.3.6.1.4.1.6527.3.1.2.3.27.1.4	RowStatus	read-create	vRtrInetAggrRowStatus controls the creation and deletion of rows in the table.
ROW vRtrInetStaticRouteRowStatus	1.3.6.1.4.1.6527.3.1.2.3.24.1.5	RowStatus	read-create	vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table.
ROW vRtrInetSvcIpRangeRowStatus	1.3.6.1.4.1.6527.3.1.2.3.28.1.4	RowStatus	read-create	The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges.
ROW vRtrRowStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.2	RowStatus	read-create	The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.
ROW vRtrStaticRouteRowStatus	1.3.6.1.4.1.6527.3.1.2.3.9.1.4	RowStatus	read-create	The row status variable, used according to row installation and removal conventions.
ROW vRtrSvcIpRangeRowStatus	1.3.6.1.4.1.6527.3.1.2.3.10.1.3	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries.
TCpmProtPolicyID (1)
TCP vRtrIfCpmProtPolicyId	1.3.6.1.4.1.6527.3.1.2.3.4.1.68	TCpmProtPolicyID	read-create	The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
TDot1pAppId (1)
TDO tmnxDot1pAppId	1.3.6.1.4.1.6527.3.1.2.3.50.1.1	TDot1pAppId	not-accessible	The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel 7x50 SR router.
TDSCPAppId (1)
TDS tmnxDscpAppId	1.3.6.1.4.1.6527.3.1.2.3.46.1.1	TDSCPAppId	not-accessible	The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel 7x50 SR router which generates control traffic over IP.
TDSCPValue (1)
TDS tmnxDscpFCDscpValue	1.3.6.1.4.1.6527.3.1.2.3.48.1.1	TDSCPValue	not-accessible	The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue.
TDSCPValueOrNone (1)
TDS tmnxDscpAppDscpValue	1.3.6.1.4.1.6527.3.1.2.3.46.1.3	TDSCPValueOrNone	read-write	The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific.
TestAndIncr (4)
TES vRtrInetStaticRouteAvailIndex	1.3.6.1.4.1.6527.3.1.2.3.25.1.1	TestAndIncr	read-only	The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
TES vRtrNewIfIndex	1.3.6.1.4.1.6527.3.1.2.3.1.1.13	TestAndIncr	read-create	This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
TES vRtrNextVRtrID	1.3.6.1.4.1.6527.3.1.2.3.15.1	TestAndIncr	read-create	The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
TES vRtrStaticRouteAvailableIndex	1.3.6.1.4.1.6527.3.1.2.3.14.1.3	TestAndIncr	read-only	The available quaternary index for the vRtrStaticRouteTable.
TFCType (1)
TFC tmnxDscpFCValue	1.3.6.1.4.1.6527.3.1.2.3.48.1.4	TFCType	read-write	The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0.
TFilterID (1)
TFI vRtrIfDHCPAutoFilterId	1.3.6.1.4.1.6527.3.1.2.3.19.1.18	TFilterID	read-only	vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface.
TimeStamp (26)
TIM tmnxDot1pAppLastChanged	1.3.6.1.4.1.6527.3.1.2.3.50.1.2	TimeStamp	read-only	The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxDot1pAppTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.49	TimeStamp	read-only	The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxDscpAppLastChanged	1.3.6.1.4.1.6527.3.1.2.3.46.1.2	TimeStamp	read-only	The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxDscpAppTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.45	TimeStamp	read-only	The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxDscpFCLastChanged	1.3.6.1.4.1.6527.3.1.2.3.48.1.3	TimeStamp	read-only	The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxDscpFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.47	TimeStamp	read-only	The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM vRtrAggregationLastChanged	1.3.6.1.4.1.6527.3.1.2.3.13.1.4	TimeStamp	read-create	Time stamp of last change of any object for this entry.
TIM vRtrDHCP6DropStatLastCleared	1.3.6.1.4.1.6527.3.1.2.3.41.1.2	TimeStamp	read-only	The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
TIM vRtrDHCP6MsgStatsLstClrd	1.3.6.1.4.1.6527.3.1.2.3.42.1.2	TimeStamp	read-only	The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
TIM vRtrIfBfdSessionLastDownTime	1.3.6.1.4.1.6527.3.1.2.3.34.1.10	TimeStamp	read-only	The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down.
TIM vRtrIfBfdSessionLastUpTime	1.3.6.1.4.1.6527.3.1.2.3.34.1.11	TimeStamp	read-only	The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up.
TIM vRtrIfDHCP6LastChanged	1.3.6.1.4.1.6527.3.1.2.3.36.1.1	TimeStamp	read-only	The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry.
TIM vRtrIfDHCP6PfxDelegationLstChgd	1.3.6.1.4.1.6527.3.1.2.3.39	TimeStamp	read-only	The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable
TIM vRtrIfDHCP6PfxdLastChanged	1.3.6.1.4.1.6527.3.1.2.3.40.1.4	TimeStamp	read-only	The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed.
TIM vRtrIfDHCP6TableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.35	TimeStamp	read-only	The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table
TIM vRtrIfIcmp6OutNbrAdvTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.34	TimeStamp	read-only	The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface.
TIM vRtrIfIcmp6OutNbrSolicitsTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.32	TimeStamp	read-only	The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface.
TIM vRtrIfIcmp6OutRtrAdvTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.30	TimeStamp	read-only	The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface.
TIM vRtrIfIcmp6OutRtrSolicitsTime	1.3.6.1.4.1.6527.3.1.2.3.32.1.28	TimeStamp	read-only	The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface.
TIM vRtrIfLastOperStateChange	1.3.6.1.4.1.6527.3.1.2.3.4.1.61	TimeStamp	read-only	The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.
TIM vRtrInetAggrLastChanged	1.3.6.1.4.1.6527.3.1.2.3.27.1.5	TimeStamp	read-create	The value of vRtrInetAggrLastChanged specifies the time stamp of the last change to this row of vRtrInetInstAggrTable .
TIM vRtrInetInstAggrTblLastChged	1.3.6.1.4.1.6527.3.1.2.3.26	TimeStamp	read-only	Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row.
TIM vRtrInetStaticRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.24.1.6	TimeStamp	read-only	The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
TIM vRtrInstanceAggregationTableLastChanged	1.3.6.1.4.1.6527.3.1.2.3.12	TimeStamp	read-only	Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row.
TIM vRtrIpCidrRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.7.1.1	TimeStamp	read-only	The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.
TIM vRtrStaticRouteLastEnabledTime	1.3.6.1.4.1.6527.3.1.2.3.9.1.5	TimeStamp	read-only	The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
TimeTicks (1)
TIK vRtrInetStatRteCpeChkUpTime	1.3.6.1.4.1.6527.3.1.2.3.44.1.1	TimeTicks	read-only	The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available.
TIPFilterID (4)
TIP vRtrIfEgressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.28	TIPFilterID	read-create	The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIngressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.27	TIPFilterID	read-create	The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIPv6EgressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.42	TIPFilterID	read-create	The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIPv6IngressFilterId	1.3.6.1.4.1.6527.3.1.2.3.4.1.41	TIPFilterID	read-create	The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TItemDescription (3)
TIT vRtrDescription	1.3.6.1.4.1.6527.3.1.2.3.1.1.25	TItemDescription	read-create	The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TIT vRtrIfDHCP6Description	1.3.6.1.4.1.6527.3.1.2.3.36.1.4	TItemDescription	read-create	The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TIT vRtrIfDHCPDescription	1.3.6.1.4.1.6527.3.1.2.3.19.1.17	TItemDescription	read-create	The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TItemLongDescription (1)
TIT vRtrIfDescription	1.3.6.1.4.1.6527.3.1.2.3.4.1.34	TItemLongDescription	read-create	The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TmnxAdminState (8)
TMN vRtrAdminState	1.3.6.1.4.1.6527.3.1.2.3.1.1.3	TmnxAdminState	read-create	The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.
TMN vRtrIfAdminState	1.3.6.1.4.1.6527.3.1.2.3.4.1.8	TmnxAdminState	read-create	The desired administrative state for this router interface.
TMN vRtrIfBfdAdminState	1.3.6.1.4.1.6527.3.1.2.3.33.1.1	TmnxAdminState	read-write	The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot.
TMN vRtrIfDHCP6AdminState	1.3.6.1.4.1.6527.3.1.2.3.36.1.2	TmnxAdminState	read-create	The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed.
TMN vRtrIfDHCPAdminState	1.3.6.1.4.1.6527.3.1.2.3.19.1.15	TmnxAdminState	read-create	vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'.
TMN vRtrIfDHCPProxyAdminState	1.3.6.1.4.1.6527.3.1.2.3.19.1.28	TmnxAdminState	read-create	The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'.
TMN vRtrInetStaticRouteAdminState	1.3.6.1.4.1.6527.3.1.2.3.24.1.15	TmnxAdminState	read-create	The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route
TMN vRtrStaticRouteAdminState	1.3.6.1.4.1.6527.3.1.2.3.9.1.14	TmnxAdminState	read-create	The desired administrative state for this virtual router static route
TmnxBgpAutonomousSystem (4)
TMN vRtrAggregationAggregatorAS	1.3.6.1.4.1.6527.3.1.2.3.13.1.7	TmnxBgpAutonomousSystem	read-create	When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
TMN vRtrAS	1.3.6.1.4.1.6527.3.1.2.3.1.1.12	TmnxBgpAutonomousSystem	read-create	The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated.
TMN vRtrConfederationAS	1.3.6.1.4.1.6527.3.1.2.3.1.1.18	TmnxBgpAutonomousSystem	read-create	The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.
TMN vRtrInetAggrAggregatorAS	1.3.6.1.4.1.6527.3.1.2.3.27.1.8	TmnxBgpAutonomousSystem	read-create	The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
TmnxCustId (1)
TMN vRtrCustId	1.3.6.1.4.1.6527.3.1.2.3.1.1.30	TmnxCustId	read-only	When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.
TmnxDHCP6MsgType (1)
TMN vRtrDHCP6MsgStatsMsgType	1.3.6.1.4.1.6527.3.1.2.3.42.1.1	TmnxDHCP6MsgType	not-accessible	The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis.
TmnxEncapVal (1)
TMN vRtrIfEncapValue	1.3.6.1.4.1.6527.3.1.2.3.4.1.7	TmnxEncapVal	read-create	The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.
TmnxInetAddrState (2)
TMN vRiaInetAddrState	1.3.6.1.4.1.6527.3.1.2.3.6.1.11	TmnxInetAddrState	read-only	The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.
TMN vRtrIfLinkLocalAddressState	1.3.6.1.4.1.6527.3.1.2.3.4.1.60	TmnxInetAddrState	read-only	The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.
TmnxOperState (7)
TMN vRtrAggregationOperState	1.3.6.1.4.1.6527.3.1.2.3.13.1.9	TmnxOperState	read-only	vRtrAggregationOperState specifies the current operational status of the aggregation entry.
TMN vRtrIfBfdSessionOperState	1.3.6.1.4.1.6527.3.1.2.3.34.1.5	TmnxOperState	read-only	The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface.
TMN vRtrIfIPv6OperState	1.3.6.1.4.1.6527.3.1.2.3.4.1.40	TmnxOperState	read-only	The current operational status for IPv6 on this router interface.
TMN vRtrIfOperState	1.3.6.1.4.1.6527.3.1.2.3.4.1.9	TmnxOperState	read-only	The current operational status of this router interface.
TMN vRtrInetAggrOperState	1.3.6.1.4.1.6527.3.1.2.3.27.1.10	TmnxOperState	read-only	The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry.
TMN vRtrIpNetToMediaOperState	1.3.6.1.4.1.6527.3.1.2.3.11.1.2	TmnxOperState	read-only	The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'.
TMN vRtrOperState	1.3.6.1.4.1.6527.3.1.2.3.2.1.1	TmnxOperState	read-only	vRtrOperState indicates current operational status of this virtual router.
TmnxPortID (1)
TMN vRtrIfPortID	1.3.6.1.4.1.6527.3.1.2.3.4.1.5	TmnxPortID	read-create	The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.
TmnxServId (2)
TMN vRtrIfServiceId	1.3.6.1.4.1.6527.3.1.2.3.4.1.37	TmnxServId	read-create	The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.
TMN vRtrServiceId	1.3.6.1.4.1.6527.3.1.2.3.1.1.29	TmnxServId	read-only	When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.
TmnxSlotNum (1)
TMN vRtrBfdSlotNumber	1.3.6.1.4.1.6527.3.1.2.3.21.14	TmnxSlotNum	accessible-for-notify	The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
TmnxStatus (13)
TMN vRtrBgpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.6	TmnxStatus	read-create	The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.
TMN vRtrIfMplsStatus	1.3.6.1.4.1.6527.3.1.2.3.4.1.30	TmnxStatus	read-create	Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.
TMN vRtrIgmpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.31	TmnxStatus	read-create	The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.
TMN vRtrIsIsStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.15	TmnxStatus	read-create	The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.
TMN vRtrLdpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.14	TmnxStatus	read-create	The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.
TMN vRtrMldStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.45	TmnxStatus	read-create	The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.
TMN vRtrMplsStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.7	TmnxStatus	read-create	The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.
TMN vRtrMsdpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.42	TmnxStatus	read-create	The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.
TMN vRtrOspfStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.8	TmnxStatus	read-create	The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrOspfv3Status	1.3.6.1.4.1.6527.3.1.2.3.1.1.41	TmnxStatus	read-create	The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrPimStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.36	TmnxStatus	read-create	The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.
TMN vRtrRipStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.9	TmnxStatus	read-create	The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.
TMN vRtrRsvpStatus	1.3.6.1.4.1.6527.3.1.2.3.1.1.10	TmnxStatus	read-create	The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.
TmnxTunnelID (1)
TMN vRtrTunnelID	1.3.6.1.4.1.6527.3.1.2.3.17.1.5	TmnxTunnelID	not-accessible	Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types.
TmnxTunnelType (1)
TMN vRtrTunnelType	1.3.6.1.4.1.6527.3.1.2.3.17.1.4	TmnxTunnelType	not-accessible	The type of this tunnel entity.
TmnxVPNId (1)
TMN vRtrVpnId	1.3.6.1.4.1.6527.3.1.2.3.1.1.23	TmnxVPNId	read-create	The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.
TmnxVPNRouteDistinguisher (1)
TMN vRtrRouteDistinguisher	1.3.6.1.4.1.6527.3.1.2.3.1.1.19	TmnxVPNRouteDistinguisher	read-create	The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned.
TmnxVRtrID (3)
TMN vRtrDhcpRestoreLseStateVRtrId	1.3.6.1.4.1.6527.3.1.2.3.21.9	TmnxVRtrID	accessible-for-notify	The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap.
TMN vRtrID	1.3.6.1.4.1.6527.3.1.2.3.1.1.1	TmnxVRtrID	accessible-for-notify	The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.
TMN vRtrIfGlobalIndexvRtrID	1.3.6.1.4.1.6527.3.1.2.3.37.1.1	TmnxVRtrID	read-only	The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.
TmnxVRtrIDOrZero (1)
TMN vRtrSecondaryVrfId	1.3.6.1.4.1.6527.3.1.2.3.1.1.44	TmnxVRtrIDOrZero	read-only	The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system.
TNamedItem (2)
TNA vRtrIfName	1.3.6.1.4.1.6527.3.1.2.3.4.1.4	TNamedItem	read-create	The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.
TNA vRtrMcPathMgmtPlcyName	1.3.6.1.4.1.6527.3.1.2.3.1.1.51	TNamedItem	read-create	The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.
TNamedItemOrEmpty (5)
TNA vRtrIfLocalDhcpServerName	1.3.6.1.4.1.6527.3.1.2.3.4.1.66	TNamedItemOrEmpty	read-create	The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
TNA vRtrName	1.3.6.1.4.1.6527.3.1.2.3.1.1.4	TNamedItemOrEmpty	read-create	The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. When a row is created in the vRtrConfTable for a service vprn, the agent assigns the name 'VR-'. Note that for row creation to succeed, a value must be specified for vRtrName.
TNA vRtrVrfExportTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.34	TNamedItemOrEmpty	read-create	The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfImportTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.35	TNamedItemOrEmpty	read-create	The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfTarget	1.3.6.1.4.1.6527.3.1.2.3.1.1.33	TNamedItemOrEmpty	read-create	The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.
TNetworkPolicyID (1)
TNE vRtrIfQosPolicyId	1.3.6.1.4.1.6527.3.1.2.3.4.1.26	TNetworkPolicyID	read-create	The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TPolicyStatementNameOrEmpty (21)
TPO vRtrExportPolicy1	1.3.6.1.4.1.6527.3.1.2.3.16.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy2	1.3.6.1.4.1.6527.3.1.2.3.16.1.7	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy3	1.3.6.1.4.1.6527.3.1.2.3.16.1.8	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy4	1.3.6.1.4.1.6527.3.1.2.3.16.1.9	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrExportPolicy5	1.3.6.1.4.1.6527.3.1.2.3.16.1.10	TPolicyStatementNameOrEmpty	read-create	The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrIfDHCPAuthPolicy	1.3.6.1.4.1.6527.3.1.2.3.19.1.20	TPolicyStatementNameOrEmpty	read-create	Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable.
TPO vRtrIfProxyArpPolicy1	1.3.6.1.4.1.6527.3.1.2.3.18.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy2	1.3.6.1.4.1.6527.3.1.2.3.18.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy3	1.3.6.1.4.1.6527.3.1.2.3.18.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy4	1.3.6.1.4.1.6527.3.1.2.3.18.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyArpPolicy5	1.3.6.1.4.1.6527.3.1.2.3.18.1.7	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'.
TPO vRtrIfProxyNDPolicy1	1.3.6.1.4.1.6527.3.1.2.3.38.1.2	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy2	1.3.6.1.4.1.6527.3.1.2.3.38.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy3	1.3.6.1.4.1.6527.3.1.2.3.38.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy4	1.3.6.1.4.1.6527.3.1.2.3.38.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrIfProxyNDPolicy5	1.3.6.1.4.1.6527.3.1.2.3.38.1.6	TPolicyStatementNameOrEmpty	read-create	The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
TPO vRtrImportPolicy1	1.3.6.1.4.1.6527.3.1.2.3.16.1.1	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy2	1.3.6.1.4.1.6527.3.1.2.3.16.1.2	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy3	1.3.6.1.4.1.6527.3.1.2.3.16.1.3	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy4	1.3.6.1.4.1.6527.3.1.2.3.16.1.4	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TPO vRtrImportPolicy5	1.3.6.1.4.1.6527.3.1.2.3.16.1.5	TPolicyStatementNameOrEmpty	read-create	The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
TruthValue (46)
T/F vRiaIgpInhibit	1.3.6.1.4.1.6527.3.1.2.3.6.1.7	TruthValue	read-create	This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.
T/F vRiaInetEui64	1.3.6.1.4.1.6527.3.1.2.3.6.1.12	TruthValue	read-create	The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.
T/F vRtrAdvPrefixAutonomousFlag	1.3.6.1.4.1.6527.3.1.2.3.23.1.6	TruthValue	read-create	Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address.
T/F vRtrAdvPrefixOnLinkFlag	1.3.6.1.4.1.6527.3.1.2.3.23.1.5	TruthValue	read-create	This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
T/F vRtrAggregationASSet	1.3.6.1.4.1.6527.3.1.2.3.13.1.6	TruthValue	read-create	When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR.
T/F vRtrAggregationSummaryOnly	1.3.6.1.4.1.6527.3.1.2.3.13.1.5	TruthValue	read-create	When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised.
T/F vRtrGracefulRestart	1.3.6.1.4.1.6527.3.1.2.3.1.1.26	TruthValue	read-create	The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.
T/F vRtrIfDHCP6EnableNgbrResolution	1.3.6.1.4.1.6527.3.1.2.3.36.1.17	TruthValue	read-create	The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4.
T/F vRtrIfDHCP6RemoteIdOption	1.3.6.1.4.1.6527.3.1.2.3.36.1.18	TruthValue	read-create	The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId.
T/F vRtrIfDHCPGiAddressAsSrc	1.3.6.1.4.1.6527.3.1.2.3.19.1.25	TruthValue	read-create	The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on.
T/F vRtrIfDHCPLayer2Header	1.3.6.1.4.1.6527.3.1.2.3.19.1.34	TruthValue	read-create	The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used.
T/F vRtrIfDHCPMatchOption82	1.3.6.1.4.1.6527.3.1.2.3.19.1.26	TruthValue	read-create	The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used.
T/F vRtrIfDHCPProxyLTRadiusOverride	1.3.6.1.4.1.6527.3.1.2.3.19.1.31	TruthValue	read-create	The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
T/F vRtrIfDHCPRelayInfoOption	1.3.6.1.4.1.6527.3.1.2.3.19.1.1	TruthValue	read-create	vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled.
T/F vRtrIfDHCPRelayTrusted	1.3.6.1.4.1.6527.3.1.2.3.19.1.14	TruthValue	read-create	When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero.
T/F vRtrIfDirectedBroadcast	1.3.6.1.4.1.6527.3.1.2.3.4.1.29	TruthValue	read-create	When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.
T/F vRtrIfIcmpMaskReply	1.3.6.1.4.1.6527.3.1.2.3.4.1.13	TruthValue	read-create	When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.
T/F vRtrIfIcmpRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.14	TruthValue	read-create	When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.
T/F vRtrIfIcmpTtlExpired	1.3.6.1.4.1.6527.3.1.2.3.4.1.20	TruthValue	read-create	When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.
T/F vRtrIfIcmpUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.17	TruthValue	read-create	When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.
T/F vRtrIfIcmpV6ParamProblem	1.3.6.1.4.1.6527.3.1.2.3.4.1.55	TruthValue	read-create	The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.
T/F vRtrIfIcmpV6PktTooBig	1.3.6.1.4.1.6527.3.1.2.3.4.1.52	TruthValue	read-create	The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.
T/F vRtrIfIcmpV6Redirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.43	TruthValue	read-create	When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.
T/F vRtrIfIcmpV6TimeExceeded	1.3.6.1.4.1.6527.3.1.2.3.4.1.49	TruthValue	read-create	The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.
T/F vRtrIfIcmpV6Unreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.46	TruthValue	read-create	When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.
T/F vRtrIfInitDelayEnable	1.3.6.1.4.1.6527.3.1.2.3.4.1.67	TruthValue	read-create	The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.
T/F vRtrIfIPv6ConfigAllowed	1.3.6.1.4.1.6527.3.1.2.3.4.1.39	TruthValue	read-create	The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured.
T/F vRtrIfNtpBroadcast	1.3.6.1.4.1.6527.3.1.2.3.4.1.23	TruthValue	read-create	When vRtrIfNtpBroadcast is set to 'true', the NTP broadcasts will be transmitted on this interface.
T/F vRtrIfProxyArp	1.3.6.1.4.1.6527.3.1.2.3.18.1.1	TruthValue	read-create	If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface.
T/F vRtrIfProxyArpLocal	1.3.6.1.4.1.6527.3.1.2.3.18.1.2	TruthValue	read-create	If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet.
T/F vRtrIfProxyNDLocal	1.3.6.1.4.1.6527.3.1.2.3.38.1.1	TruthValue	read-create	If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet.
T/F vRtrIfTosMarkingTrusted	1.3.6.1.4.1.6527.3.1.2.3.4.1.36	TruthValue	read-create	The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, ALCATEL-IND1-TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.
T/F vRtrIgnoreIcmpRedirect	1.3.6.1.4.1.6527.3.1.2.3.1.1.40	TruthValue	read-create	If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
T/F vRtrInetAggrASSet	1.3.6.1.4.1.6527.3.1.2.3.27.1.7	TruthValue	read-create	The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR.
T/F vRtrInetAggrSummaryOnly	1.3.6.1.4.1.6527.3.1.2.3.27.1.6	TruthValue	read-create	The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised.
T/F vRtrInetStaticRouteCpeEnableLog	1.3.6.1.4.1.6527.3.1.2.3.24.1.24	TruthValue	read-create	The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled.
T/F vRtrInetStaticRouteDisallowIgp	1.3.6.1.4.1.6527.3.1.2.3.24.1.17	TruthValue	read-create	The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
T/F vRtrInetStaticRouteEnableBfd	1.3.6.1.4.1.6527.3.1.2.3.24.1.19	TruthValue	read-create	The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD.
T/F vRtrInetSvcIpRangeExclusive	1.3.6.1.4.1.6527.3.1.2.3.28.1.5	TruthValue	read-create	The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports.
T/F vRtrIPv6IgnoreIcmpRedirect	1.3.6.1.4.1.6527.3.1.2.3.1.1.50	TruthValue	read-create	If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
T/F vRtrIPv6MaxNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.49	TruthValue	read-create	The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
T/F vRtrMaxMcastNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.38	TruthValue	read-create	The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
T/F vRtrMaxNumRoutesLogOnly	1.3.6.1.4.1.6527.3.1.2.3.1.1.32	TruthValue	read-create	The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
T/F vRtrStaticRouteDisallowIgp	1.3.6.1.4.1.6527.3.1.2.3.9.1.16	TruthValue	read-create	The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
T/F vRtrSvcIpRangeExclusive	1.3.6.1.4.1.6527.3.1.2.3.10.1.4	TruthValue	read-create	When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports.
T/F vRtrTriggeredPolicy	1.3.6.1.4.1.6527.3.1.2.3.1.1.17	TruthValue	read-create	If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.
Unsigned32 (75)
U32 vRtrAdvPrefixPreferredLifetime	1.3.6.1.4.1.6527.3.1.2.3.23.1.7	Unsigned32	read-create	The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
U32 vRtrAdvPrefixValidLifetime	1.3.6.1.4.1.6527.3.1.2.3.23.1.8	Unsigned32	read-create	The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
U32 vRtrAutoFilterDHCPClientLease	1.3.6.1.4.1.6527.3.1.2.3.21.2	Unsigned32	accessible-for-notify	The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time.
U32 vRtrEcmpMaxRoutes	1.3.6.1.4.1.6527.3.1.2.3.1.1.11	Unsigned32	read-create	The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.
U32 vRtrHighRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.21	Unsigned32	read-only	The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIfArpTimeout	1.3.6.1.4.1.6527.3.1.2.3.4.1.12	Unsigned32	read-create	The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.
U32 vRtrIfBfdEchoInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.5	Unsigned32	read-write	The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface.
U32 vRtrIfBfdMultiplier	1.3.6.1.4.1.6527.3.1.2.3.33.1.4	Unsigned32	read-write	The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault.
U32 vRtrIfBfdReceiveInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.3	Unsigned32	read-write	The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface.
U32 vRtrIfBfdSessionLclDisc	1.3.6.1.4.1.6527.3.1.2.3.34.1.14	Unsigned32	read-only	The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session.
U32 vRtrIfBfdSessionRemDisc	1.3.6.1.4.1.6527.3.1.2.3.34.1.15	Unsigned32	read-only	The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session.
U32 vRtrIfBfdSessionRxInterval	1.3.6.1.4.1.6527.3.1.2.3.34.1.18	Unsigned32	read-only	The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdReceiveInterval' and the remote node's transmit interval.
U32 vRtrIfBfdSessionTxInterval	1.3.6.1.4.1.6527.3.1.2.3.34.1.17	Unsigned32	read-only	The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdTransmitInterval' and the remote node's receive interval.
U32 vRtrIfBfdTransmitInterval	1.3.6.1.4.1.6527.3.1.2.3.33.1.2	Unsigned32	read-write	The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface.
U32 vRtrIfChannelID	1.3.6.1.4.1.6527.3.1.2.3.4.1.6	Unsigned32	read-create	When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.
U32 vRtrIfDelaySeconds	1.3.6.1.4.1.6527.3.1.2.3.4.1.64	Unsigned32	read-create	The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. The default value of vRtrIfDelaySeconds is 0. It indicates that the interface will become operational as soon as it is enabled.
U32 vRtrIfDHCP6CurrLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.36.1.15	Unsigned32	read-only	The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function.
U32 vRtrIfDHCP6CurrServerLeaseStates	1.3.6.1.4.1.6527.3.1.2.3.36.1.21	Unsigned32	read-only	The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function.
U32 vRtrIfDHCP6LeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.36.1.14	Unsigned32	read-create	The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface.
U32 vRtrIfDHCP6PfxdIAID	1.3.6.1.4.1.6527.3.1.2.3.40.1.7	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done.
U32 vRtrIfDHCP6PfxdPrefLifetime	1.3.6.1.4.1.6527.3.1.2.3.40.1.8	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity.
U32 vRtrIfDHCP6PfxdValidLifetime	1.3.6.1.4.1.6527.3.1.2.3.40.1.9	Unsigned32	read-create	The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity.
U32 vRtrIfDHCP6ServerMaxLeaseStates	1.3.6.1.4.1.6527.3.1.2.3.36.1.20	Unsigned32	read-create	The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface.
U32 vRtrIfDHCPAutoFilter	1.3.6.1.4.1.6527.3.1.2.3.19.1.5	Unsigned32	read-create	vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address.
U32 vRtrIfDHCPLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.19.1.21	Unsigned32	read-create	The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface.
U32 vRtrIfDHCPLseStatePersistKey	1.3.6.1.4.1.6527.3.1.2.3.22.1.5	Unsigned32	read-only	The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file.
U32 vRtrIfDHCPLseStateRemainLseTime	1.3.6.1.4.1.6527.3.1.2.3.22.1.3	Unsigned32	read-only	The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state.
U32 vRtrIfDHCPOperAutoFilter	1.3.6.1.4.1.6527.3.1.2.3.19.1.19	Unsigned32	read-only	The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages.
U32 vRtrIfDHCPOperLeasePopulate	1.3.6.1.4.1.6527.3.1.2.3.19.1.22	Unsigned32	read-only	The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface.
U32 vRtrIfDHCPProxyLeaseTime	1.3.6.1.4.1.6527.3.1.2.3.19.1.30	Unsigned32	read-create	The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
U32 vRtrIfGlobalIndex	1.3.6.1.4.1.6527.3.1.2.3.4.1.63	Unsigned32	read-only	The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
U32 vRtrIfIcmpNumRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.15	Unsigned32	read-create	The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.
U32 vRtrIfIcmpNumTtlExpired	1.3.6.1.4.1.6527.3.1.2.3.4.1.21	Unsigned32	read-create	The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.
U32 vRtrIfIcmpNumUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.18	Unsigned32	read-create	The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.
U32 vRtrIfIcmpRedirectsTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.16	Unsigned32	read-create	The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.
U32 vRtrIfIcmpTtlExpiredTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.22	Unsigned32	read-create	The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.
U32 vRtrIfIcmpUnreachablesTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.19	Unsigned32	read-create	The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.
U32 vRtrIfIcmpV6NumParamProblem	1.3.6.1.4.1.6527.3.1.2.3.4.1.56	Unsigned32	read-create	The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.
U32 vRtrIfIcmpV6NumPktTooBig	1.3.6.1.4.1.6527.3.1.2.3.4.1.53	Unsigned32	read-create	The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.
U32 vRtrIfIcmpV6NumRedirects	1.3.6.1.4.1.6527.3.1.2.3.4.1.44	Unsigned32	read-create	The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.
U32 vRtrIfIcmpV6NumTimeExceeded	1.3.6.1.4.1.6527.3.1.2.3.4.1.50	Unsigned32	read-create	The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.
U32 vRtrIfIcmpV6NumUnreachables	1.3.6.1.4.1.6527.3.1.2.3.4.1.47	Unsigned32	read-create	The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.
U32 vRtrIfIcmpV6ParamProblemTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.57	Unsigned32	read-create	The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.
U32 vRtrIfIcmpV6PktTooBigTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.54	Unsigned32	read-create	The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.
U32 vRtrIfIcmpV6RedirectsTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.45	Unsigned32	read-create	The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.
U32 vRtrIfIcmpV6TimeExceededTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.51	Unsigned32	read-create	The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.
U32 vRtrIfIcmpV6UnreachablesTime	1.3.6.1.4.1.6527.3.1.2.3.4.1.48	Unsigned32	read-create	The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.
U32 vRtrIfLdpSyncTimer	1.3.6.1.4.1.6527.3.1.2.3.4.1.70	Unsigned32	read-create	The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.
U32 vRtrIfMtu	1.3.6.1.4.1.6527.3.1.2.3.4.1.25	Unsigned32	read-create	The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.
U32 vRtrIfOperMtu	1.3.6.1.4.1.6527.3.1.2.3.4.1.62	Unsigned32	read-only	The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.
U32 vRtrIllegalLabelThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.22	Unsigned32	read-create	The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrInetStaticRouteCpeDropCnt	1.3.6.1.4.1.6527.3.1.2.3.24.1.23	Unsigned32	read-create	The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated.
U32 vRtrInetStaticRouteCpeInterval	1.3.6.1.4.1.6527.3.1.2.3.24.1.22	Unsigned32	read-create	The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr.
U32 vRtrInetStaticRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.24.1.10	Unsigned32	read-create	The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
U32 vRtrInetStaticRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.24.1.9	Unsigned32	read-create	The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
U32 vRtrInetStaticRouteTag	1.3.6.1.4.1.6527.3.1.2.3.24.1.18	Unsigned32	read-create	The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
U32 vRtrInetStatRteCpeChkTTL	1.3.6.1.4.1.6527.3.1.2.3.44.1.6	Unsigned32	read-only	The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second.
U32 vRtrIpCidrRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.7.1.3	Unsigned32	read-only	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
U32 vRtrIpCidrRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.7.1.2	Unsigned32	read-create	When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
U32 vRtrIpNetToMediaTimer	1.3.6.1.4.1.6527.3.1.2.3.11.1.1	Unsigned32	read-only	The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache.
U32 vRtrIPv6HighRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.48	Unsigned32	read-only	The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIPv6MidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.47	Unsigned32	read-create	The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIPv6RouteThresholdSoakTime	1.3.6.1.4.1.6527.3.1.2.3.15.6	Unsigned32	read-write	The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.
U32 vRtrMaxARPEntries	1.3.6.1.4.1.6527.3.1.2.3.15.5	Unsigned32	read-only	vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.
U32 vRtrMcastMidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.39	Unsigned32	read-create	The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrMidRouteThreshold	1.3.6.1.4.1.6527.3.1.2.3.1.1.20	Unsigned32	read-create	The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrNumberOfBfdSessionsOnSlot	1.3.6.1.4.1.6527.3.1.2.3.21.15	Unsigned32	accessible-for-notify	The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
U32 vRtrRouteThresholdSoakTime	1.3.6.1.4.1.6527.3.1.2.3.15.4	Unsigned32	read-write	Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.
U32 vRtrStaticRouteMetric	1.3.6.1.4.1.6527.3.1.2.3.9.1.9	Unsigned32	read-create	When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
U32 vRtrStaticRouteNumber	1.3.6.1.4.1.6527.3.1.2.3.8	Unsigned32	read-only	The number of current vRtrStaticRouteTable entries that are 'active'.
U32 vRtrStaticRoutePreference	1.3.6.1.4.1.6527.3.1.2.3.9.1.8	Unsigned32	read-create	The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
U32 vRtrStaticRouteTag	1.3.6.1.4.1.6527.3.1.2.3.9.1.17	Unsigned32	read-create	The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
U32 vRtrSvcIpRangeMask	1.3.6.1.4.1.6527.3.1.2.3.10.1.2	Unsigned32	not-accessible	The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0.
U32 vRtrTunnelMetric	1.3.6.1.4.1.6527.3.1.2.3.17.1.7	Unsigned32	read-only	vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel.
U32 vRtrTunnelPreference	1.3.6.1.4.1.6527.3.1.2.3.17.1.3	Unsigned32	not-accessible	The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table.
No type (154)
timetraVRtrMIBModule	1.3.6.1.4.1.6527.1.1.3.3			This document is the SNMP MIB module to manage and provision the Alcatel 7x50 device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxDot1pAppEntry	1.3.6.1.4.1.6527.3.1.2.3.50.1		not-accessible	Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization.
tmnxDot1pAppTable	1.3.6.1.4.1.6527.3.1.2.3.50		not-accessible	The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system.
tmnxDscpAppEntry	1.3.6.1.4.1.6527.3.1.2.3.46.1		not-accessible	Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization.
tmnxDscpAppTable	1.3.6.1.4.1.6527.3.1.2.3.46		not-accessible	The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system.
tmnxDscpAppV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.36			The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel 7x50 SR series systems release 6.0.
tmnxDscpFCEntry	1.3.6.1.4.1.6527.3.1.2.3.48.1		not-accessible	Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization.
tmnxDscpFCTable	1.3.6.1.4.1.6527.3.1.2.3.48		not-accessible	The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system.
tmnxVRtr7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.4			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R4.0.
tmnxVRtr7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.6			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R5.0.
tmnxVRtr7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.8			The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R6.0.
tmnxVRtr7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.5			The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R4.0.
tmnxVRtr7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.7			The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R5.0.
tmnxVRtr77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.3.1.9			The compliance statement for management of VRTR instances on Alcatel 7x50 SR series systems release R6.0.
NTF tmnxVRtrBfdMaxSessionOnSlot	1.3.6.1.4.1.6527.3.1.3.3.0.18			The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'.
NTF tmnxVRtrBfdPortTypeNotSupported	1.3.6.1.4.1.6527.3.1.3.3.0.19			The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'.
NTF tmnxVRtrBfdSessionDeleted	1.3.6.1.4.1.6527.3.1.3.3.0.33			The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted.
NTF tmnxVRtrBfdSessionDown	1.3.6.1.4.1.6527.3.1.3.3.0.17			The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down.
NTF tmnxVRtrBfdSessionProtChange	1.3.6.1.4.1.6527.3.1.3.3.0.34			The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session.
NTF tmnxVRtrBfdSessionUp	1.3.6.1.4.1.6527.3.1.3.3.0.28			The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up.
tmnxVRtrBfdV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.18			The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems.
tmnxVRtrBfdV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.41			The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel 7xxx series systems.
tmnxVRtrCompliances	1.3.6.1.4.1.6527.3.1.1.3.1
tmnxVRtrConformance	1.3.6.1.4.1.6527.3.1.1.3
NTF tmnxVRtrDHCP6AssignedIllegSubnet	1.3.6.1.4.1.6527.3.1.3.3.0.26			The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface.
NTF tmnxVRtrDHCP6ClientMacUnresolved	1.3.6.1.4.1.6527.3.1.3.3.0.27			The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet.
NTF tmnxVRtrDHCP6IllegalClientAddr	1.3.6.1.4.1.6527.3.1.3.3.0.25			The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface.
NTF tmnxVRtrDHCP6LseStateOverride	1.3.6.1.4.1.6527.3.1.3.3.0.23			The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length.
NTF tmnxVRtrDHCP6RelayLseStExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.21			The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate.
NTF tmnxVRtrDHCP6RelayReplyStripUni	1.3.6.1.4.1.6527.3.1.3.3.0.24			The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message.
NTF tmnxVRtrDHCP6ServerLseStExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.22			The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates.
NTF tmnxVRtrDHCPAFEntriesExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.10			The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter.
NTF tmnxVRtrDHCPIfLseStatesExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.20			The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate.
NTF tmnxVRtrDHCPLeaseStateOverride	1.3.6.1.4.1.6527.3.1.3.3.0.13			The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
NTF tmnxVRtrDHCPLseStatePopulateErr	1.3.6.1.4.1.6527.3.1.3.3.0.16			The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
NTF tmnxVRtrDHCPLseStRestoreProblem	1.3.6.1.4.1.6527.3.1.3.3.0.15			The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record.
NTF tmnxVRtrDHCPLseStsExceeded	1.3.6.1.4.1.6527.3.1.3.3.0.12			The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit.
NTF tmnxVRtrDHCPSuspiciousPcktRcvd	1.3.6.1.4.1.6527.3.1.3.3.0.14			The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
tmnxVRtrGlobalObjs	1.3.6.1.4.1.6527.3.1.2.3.15
tmnxVRtrGlobalR2r1Group	1.3.6.1.4.1.6527.3.1.1.3.2.10			The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel 7x50 SR series systems.
tmnxVRtrGlobalV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.38			The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrGroups	1.3.6.1.4.1.6527.3.1.1.3.2
NTF tmnxVRtrHighRouteCleared	1.3.6.1.4.1.6527.3.1.3.3.0.3			The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification.
NTF tmnxVRtrHighRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.2			The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
tmnxVRtrIfCpmProtectGroup	1.3.6.1.4.1.6527.3.1.1.3.2.35			The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel 7xxx series systems.
tmnxVRtrIfDHCPRelayGroup	1.3.6.1.4.1.6527.3.1.1.3.2.37			The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
tmnxVRtrIfDhcpServerGroup	1.3.6.1.4.1.6527.3.1.1.3.2.31			The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfIpcpV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.34			The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
tmnxVRtrIfSubscrAuthV3v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.11			The group of objects supporting management of DHCP authentication on version 3.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.15			The group of objects supporting management of virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIfV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.25			The group of objects supporting management of virtual interfaces on version 5.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrIllegalLabelTCA	1.3.6.1.4.1.6527.3.1.3.3.0.4			The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold.
tmnxVRtrIpV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.16			The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIpV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.26			The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrIPv6HighRouteCleared	1.3.6.1.4.1.6527.3.1.3.3.0.31			The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification.
NTF tmnxVRtrIPv6HighRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.30			The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
tmnxVRtrIPv6IfV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.20			The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IpV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.22			The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrIPv6IpV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.24			The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrIPv6MidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.29			The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
tmnxVRtrIPv6V4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.21			The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
NTF tmnxVRtrManagedRouteAddFailed	1.3.6.1.4.1.6527.3.1.3.3.0.35			The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed.
NTF tmnxVRtrMaxArpEntriesCleared	1.3.6.1.4.1.6527.3.1.3.3.0.9			The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification.
NTF tmnxVRtrMaxArpEntriesTCA	1.3.6.1.4.1.6527.3.1.3.3.0.8			The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported.
NTF tmnxVRtrMaxRoutes	1.3.6.1.4.1.6527.3.1.3.3.0.11			The tmnxVRtrMaxRoutes notification is generated when the number of routes contained in a VPRN reaches the value specified by vRtrMaxNumRoutes.
NTF tmnxVRtrMcastMaxRoutesCleared	1.3.6.1.4.1.6527.3.1.3.3.0.7			The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification.
NTF tmnxVRtrMcastMaxRoutesTCA	1.3.6.1.4.1.6527.3.1.3.3.0.6			The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrMcastMidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.5			The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
NTF tmnxVRtrMidRouteTCA	1.3.6.1.4.1.6527.3.1.3.3.0.1			The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
tmnxVRtrNotificationObjects	1.3.6.1.4.1.6527.3.1.2.3.21
tmnxVRtrNotificationObjV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.30			The group of objects supporting management of notification objects on Alcatel 7x50 SR 5.0 series systems.
tmnxVRtrNotificationObjV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.39			The group of objects supporting management of notification objects on Alcatel 7x50 SR 6.0 series systems.
tmnxVRtrNotifications	1.3.6.1.4.1.6527.3.1.3.3.0
tmnxVRtrNotificationV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.19			The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrNotificationV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.28			The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems.
tmnxVRtrNotificationV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.40			The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel 7xx0 SR series systems.
tmnxVRtrNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.3
tmnxVRtrObjs	1.3.6.1.4.1.6527.3.1.2.3
tmnxVRtrObsoletedObjectsV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.17			The group of objects no longer supported in version 4.0 of Alcatel 7x50 SR series systems.
tmnxVRtrObsoleteNotificationGroup	1.3.6.1.4.1.6527.3.1.1.3.2.23			The group of obsolete notifications for the transport and virtual router capabilities on Alcatel 7x50 SR series systems.
tmnxVRtrObsoleteV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.29			The group of objects in ALCATEL-IND1-TIMETRA-VRTR-MIB which are obsoleted in Alcatel 7x50 SR 5.0 series systems.
NTF tmnxVRtrStaticRouteCPEStatus	1.3.6.1.4.1.6527.3.1.3.3.0.32			The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable.
tmnxVRtrStaticRteCPEChkV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.33			The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel 7x50 SR series systems.
tmnxVRtrV4v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.14			The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
tmnxVRtrV5v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.27			The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
tmnxVRtrV6v0Group	1.3.6.1.4.1.6527.3.1.1.3.2.32			The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
vRtrAdvPrefixEntry	1.3.6.1.4.1.6527.3.1.2.3.23.1		not-accessible	An entry in the vRtrAdvPrefixTable.
vRtrAdvPrefixTable	1.3.6.1.4.1.6527.3.1.2.3.23		not-accessible	This table allows the user to configure IPv6 prefixes for router advertisements on an interface
vRtrConfEntry	1.3.6.1.4.1.6527.3.1.2.3.1.1		not-accessible	Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the ALCATEL-IND1-TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.
vRtrConfTable	1.3.6.1.4.1.6527.3.1.2.3.1		not-accessible	The vRtrConfTable has an entry for each virtual router configured in the system.
vRtrDHCP6DropStatEntry	1.3.6.1.4.1.6527.3.1.2.3.41.1		not-accessible	Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrDHCP6DropStatTable	1.3.6.1.4.1.6527.3.1.2.3.41		not-accessible	The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system.
vRtrDHCP6MsgStatEntry	1.3.6.1.4.1.6527.3.1.2.3.42.1		not-accessible	Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrDHCP6MsgStatTable	1.3.6.1.4.1.6527.3.1.2.3.42		not-accessible	The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system.
vRtrIcmp6Entry	1.3.6.1.4.1.6527.3.1.2.3.31.1		not-accessible	Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted.
vRtrIcmp6Table	1.3.6.1.4.1.6527.3.1.2.3.31		not-accessible	The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance.
vRtrIfBfdEntry	1.3.6.1.4.1.6527.3.1.2.3.33.1		not-accessible	Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
vRtrIfBfdSessionEntry	1.3.6.1.4.1.6527.3.1.2.3.34.1		not-accessible	Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
vRtrIfBfdSessionTable	1.3.6.1.4.1.6527.3.1.2.3.34		not-accessible	The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings.
vRtrIfBfdTable	1.3.6.1.4.1.6527.3.1.2.3.33		not-accessible	The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices.
vRtrIfDHCP6Entry	1.3.6.1.4.1.6527.3.1.2.3.36.1		not-accessible	Each row entry represents information related to DHCP6 Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfDHCP6PfxDelegationEntry	1.3.6.1.4.1.6527.3.1.2.3.40.1		not-accessible	Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus.
vRtrIfDHCP6PfxDelegationTable	1.3.6.1.4.1.6527.3.1.2.3.40		not-accessible	The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned.
vRtrIfDHCP6Table	1.3.6.1.4.1.6527.3.1.2.3.36		not-accessible	The vRtrIfDHCP6Table is used to configure the interface parameters for the DHCP6 Relay agent.
vRtrIfDHCPEntry	1.3.6.1.4.1.6527.3.1.2.3.19.1		not-accessible	Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfDHCPLeaseStateEntry	1.3.6.1.4.1.6527.3.1.2.3.22.1		not-accessible	DHCP lease state information for a virtual router interface.
vRtrIfDHCPLeaseStateTable	1.3.6.1.4.1.6527.3.1.2.3.22		not-accessible	vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLeaseStateTable.
vRtrIfDHCPRelayStatsEntry	1.3.6.1.4.1.6527.3.1.2.3.20.1		not-accessible	Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfDHCPRelayStatsTable	1.3.6.1.4.1.6527.3.1.2.3.20		not-accessible	The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent.
vRtrIfDHCPTable	1.3.6.1.4.1.6527.3.1.2.3.19		not-accessible	The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent.
vRtrIfEntry	1.3.6.1.4.1.6527.3.1.2.3.4.1		not-accessible	Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
vRtrIfGlobalIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.37.1		not-accessible	Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
vRtrIfGlobalIndexTable	1.3.6.1.4.1.6527.3.1.2.3.37		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).
vRtrIfIcmp6Entry	1.3.6.1.4.1.6527.3.1.2.3.32.1		not-accessible	Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
vRtrIfIcmp6Table	1.3.6.1.4.1.6527.3.1.2.3.32		not-accessible	The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface.
vRtrIfIpcpEntry	1.3.6.1.4.1.6527.3.1.2.3.43.1		not-accessible	Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
vRtrIfIpcpTable	1.3.6.1.4.1.6527.3.1.2.3.43		not-accessible	The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices.
vRtrIfNameEntry	1.3.6.1.4.1.6527.3.1.2.3.5.1		not-accessible	Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
vRtrIfNameTable	1.3.6.1.4.1.6527.3.1.2.3.5		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).
vRtrIfProxyArpEntry	1.3.6.1.4.1.6527.3.1.2.3.18.1		not-accessible	Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfProxyArpTable	1.3.6.1.4.1.6527.3.1.2.3.18		not-accessible	The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
vRtrIfProxyNDEntry	1.3.6.1.4.1.6527.3.1.2.3.38.1		not-accessible	Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfProxyNDTable	1.3.6.1.4.1.6527.3.1.2.3.38		not-accessible	The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
vRtrIfTable	1.3.6.1.4.1.6527.3.1.2.3.4		not-accessible	The vRtrIfTable has an entry for each router interface configured in the system.
vRtrInetInstAggrEntry	1.3.6.1.4.1.6527.3.1.2.3.27.1		not-accessible	vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user.
vRtrInetInstAggrTable	1.3.6.1.4.1.6527.3.1.2.3.27		not-accessible	The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
vRtrInetStaticRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.24.1		not-accessible	A particular route to a particular destination, through a particular next hop.
vRtrInetStaticRouteIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.25.1		not-accessible	The available index for the vRtrInetStaticRouteTable for every destination per virtual router.
vRtrInetStaticRouteIndexTable	1.3.6.1.4.1.6527.3.1.2.3.25		not-accessible	This entity's Static Route Index Table.
vRtrInetStaticRouteTable	1.3.6.1.4.1.6527.3.1.2.3.24		not-accessible	The table of addressing information relevant to this entity's Static Routing table.
vRtrInetStatRteCpeChkStatsEntry	1.3.6.1.4.1.6527.3.1.2.3.44.1		not-accessible	Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations.
vRtrInetStatRteCpeChkStatsTable	1.3.6.1.4.1.6527.3.1.2.3.44		not-accessible	The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects.
vRtrInetSvcIpRangeEntry	1.3.6.1.4.1.6527.3.1.2.3.28.1		not-accessible	Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
vRtrInetSvcIpRangeTable	1.3.6.1.4.1.6527.3.1.2.3.28		not-accessible	The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it.
vRtrInstanceAggregationEntry	1.3.6.1.4.1.6527.3.1.2.3.13.1		not-accessible	An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user.
vRtrInstanceAggregationTable	1.3.6.1.4.1.6527.3.1.2.3.13		not-accessible	The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
vRtrIpAddrEntry	1.3.6.1.4.1.6527.3.1.2.3.6.1		not-accessible	Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.
vRtrIpAddrTable	1.3.6.1.4.1.6527.3.1.2.3.6		not-accessible	The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.
vRtrIpCidrRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.7.1		not-accessible	Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the IP route table.
vRtrIpCidrRouteTable	1.3.6.1.4.1.6527.3.1.2.3.7		not-accessible	The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB.
vRtrIpNetToMediaEntry	1.3.6.1.4.1.6527.3.1.2.3.11.1		not-accessible	Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the vRtrIpNetToMediaTable.
vRtrIpNetToMediaTable	1.3.6.1.4.1.6527.3.1.2.3.11		not-accessible	The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB.
vRtrPolicyEntry	1.3.6.1.4.1.6527.3.1.2.3.16.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrPolicyTable	1.3.6.1.4.1.6527.3.1.2.3.16		not-accessible	The vRtrPolicyTable has an entry for each virtual router configured in the system.
vRtrStatEntry	1.3.6.1.4.1.6527.3.1.2.3.2.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
vRtrStaticRouteEntry	1.3.6.1.4.1.6527.3.1.2.3.9.1		not-accessible	A particular route to a particular destination, through a particular next hop.
vRtrStaticRouteIndexEntry	1.3.6.1.4.1.6527.3.1.2.3.14.1		not-accessible	The available index for the vRtrStaticRouteTable for every destination per virtual router.
vRtrStaticRouteIndexTable	1.3.6.1.4.1.6527.3.1.2.3.14		not-accessible	This entity's Static Route Index Table.
vRtrStaticRouteTable	1.3.6.1.4.1.6527.3.1.2.3.9		not-accessible	This entity's Static Routing table.
vRtrStatTable	1.3.6.1.4.1.6527.3.1.2.3.2		not-accessible	The vRtrStatTable has an entry for each virtual router configured in the system.
vRtrSvcIpRangeEntry	1.3.6.1.4.1.6527.3.1.2.3.10.1		not-accessible	Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
vRtrSvcIpRangeTable	1.3.6.1.4.1.6527.3.1.2.3.10		not-accessible	The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it.
vRtrTunnelEntry	1.3.6.1.4.1.6527.3.1.2.3.17.1		not-accessible	vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP.
vRtrTunnelTable	1.3.6.1.4.1.6527.3.1.2.3.17		not-accessible	vRtrTunnelTable maintains a list of tunnels for the specific router instance.

RFC description

Alcatel-Lucent TIMETRA vendor-private MIB for managing virtual router configuration and statistics.

Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-TIMETRA-VRTR-MIB

This MIB depends on

Related MIBs

What Is ALCATEL-IND1-TIMETRA-VRTR-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description