All MIBs › ALCATEL-IND1-TIMETRA-FILTER-MIB
Organization: Alcatel
Last Updated: 2008-01-01
Category: Vendor: Alcatel-Lucent
Description: Alcatel 7750 SR service router MIB covering filters, used to manage ACL-based IPv4/IPv6 traffic filter policies and their entries.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ALCATEL-IND1-TIMETRA-FILTER-MIB?
ALCATEL-IND1-TIMETRA-FILTER-MIB is a proprietary MIB from Alcatel-Lucent (Timetra) for the 7x50 SR family of service routers, covering configuration and provisioning of IPv4/IPv6 access control list (ACL)-style traffic filters. It exposes tables for defining filter policies and their match/action parameters, such as default actions and per-entry logging references, that determine how traffic is permitted, denied, or logged as it traverses the router. Its monitoring value is primarily configuration-state oriented rather than sensor-based: tIPFilterRowStatus and tIPFilterParamsRowStatus let an operator confirm a filter or filter entry is active as intended, and mismatches here can reveal unintended security exposure or accidental traffic drops rather than hardware faults; engineers looking up a specific ALCATEL-IND1-TIMETRA-FILTER-MIB OID typically do so to confirm exactly this kind of tIPFilterRowStatus value in Alcatel-Lucent's SR OS MIB reference. It works in conjunction with other Timetra MIBs (service, interface, QoS) since filters are typically applied to specific services or interfaces defined elsewhere. It is deployed by service providers on Alcatel-Lucent 7750/7710/7450 SR platforms to enforce security and traffic-engineering policies.
IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-TIMETRA-FILTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia 7750 SR-s Service Router (2020s) — current-generation FP5/FP4-based chassis in the Nokia (formerly Alcatel-Lucent) 7750 SR portfolio
Monitoring Examples
An operator would walk tIPFilterTable to enumerate every tIPFilterEntry by tIPFilterId, checking tIPFilterRowStatus and tIPFilterDefaultAction to confirm a filter policy is active and behaving as configured (permit vs. deny by default). Drilling into tIPFilterParamsTable by tIPFilterParamsIndex reveals individual match/action entries and their tIPFilterParamsLogId, useful for auditing which traffic is being logged. An unexpectedly inactive tIPFilterRowStatus on a security-critical filter would indicate a misconfiguration exposing the network to unwanted traffic.
What Can Be Monitored
- filter policy definitions and status
- filter default action (permit/deny)
- filter entry parameters and logging references
- filter/filter-entry row status
This MIB depends on
Related MIBs
Imported Objects
From ALCATEL-IND1-TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From ALCATEL-IND1-TIMETRA-TC-MIB
| Dot1PPriority | |
| IpAddressPrefixLength | |
| SdpBindId | |
| ServiceAccessPoint | |
| TDSCPFilterActionValue | |
| TDSCPNameOrEmpty | |
| TFrameType | |
| TIpOption | |
| TIpProtocol | |
| TItemDescription | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TTcpUdpPort | |
| TTcpUdpPortOperator | |
| TmnxAdminState | |
| TmnxEncapVal | |
| TmnxOperState | |
| TmnxPortID | |
| TmnxServId |
From INET-ADDRESS-MIB
| InetAddressIPv6 | |
| InetAddressPrefixLength |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Opaque | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowPointer | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tAutoIPFilterEntry | 1.3.6.1.4.1.6527.3.1.2.21.17.1 | not-accessible | Defines an entry in the tAutoIPFilterEntryTable. Entries are created and deleted in this table by the system. Each entry provides information about a single active automatic filter entry. This entry is obsoleted in release 3.0. | |
| IP tAutoIPFilterEntrySourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.21.17.1.2 | IpAddress | not-accessible | tAutoIPFilterEntrySourceIpAddr specifies the source ip-address and also serves as the secondary index to this table. This object is obsoleted in release 3.0. |
| ADR tAutoIPFilterEntrySourceIpMask | 1.3.6.1.4.1.6527.3.1.2.21.17.1.3 | IpAddressPrefixLength | read-only | The value of tAutoIPFilterEntrySourceIpMask indicates the number of bits to be matched in the source ip-address. This object is obsoleted in release 3.0. |
| tAutoIPFilterEntryTable | 1.3.6.1.4.1.6527.3.1.2.21.17 | not-accessible | Defines the Alcatel 7x50 SR series automatic IP filters for providing, via SNMP, the capability of gathering information regarding the same. tAutoIPFilterEntryTable holds a list of all automatic filter entries being used for filtering. This table is obsoleted in release 3.0. | |
| TFI tAutoIPFilterId | 1.3.6.1.4.1.6527.3.1.2.21.17.1.1 | TFilterID | not-accessible | tAutoIPFilterId serves as a primary index and uniquely identifies an application point such as a routed interface or a SAP. This object is obsoleted in release 3.0. |
| tFilter7450V4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.21.1.4 | The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R4.0. | ||
| tFilter7450V5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.21.1.6 | The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0. | ||
| tFilter7450V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.21.1.8 | The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0. | ||
| tFilter7750V4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.21.1.5 | The compliance statement for management of Filter features on Alcatel 7750 SR series systems release R4.0. | ||
| tFilter77x0V5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.21.1.7 | The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0. | ||
| tFilter77x0V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.21.1.9 | The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0. | ||
| STR tFilterAlarmDescription | 1.3.6.1.4.1.6527.3.1.2.21.8.3 | DisplayString | accessible-for-notify | The value of the object tFilterAlarmDescription is a printable character string which contains information about the cause of the problem. |
| TIM tFilterDomainLastChanged | 1.3.6.1.4.1.6527.3.1.2.21.9.1 | TimeStamp | read-only | timestamp of last change to tFilterObjects. |
| NTF tFilterEntryActivationFailed | 1.3.6.1.4.1.6527.3.1.3.21.0.2 | The tFilterEntryActivationFailed event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event is generated when this installation failed because of resource problems. | ||
| NTF tFilterEntryActivationRestored | 1.3.6.1.4.1.6527.3.1.3.21.0.3 | The tFilterEntryActivationRestored event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event tFilterEntryActivationFailed is generated when this installation originally failed because of resources problems, The notification tFilterEntryActivationRestored is sent when either the time range associated with the filter is no longer active, or when the filter entry was installed due to the availability of new resources. | ||
| G32 tFilterLogBindings | 1.3.6.1.4.1.6527.3.1.2.21.6.3 | Gauge32 | read-only | tFilterLogBindings maintains the count of the configured filter log bindings presently existing on the system. The bindings get instantiated when the filter is instantiated |
| TIT tFilterLogDescription | 1.3.6.1.4.1.6527.3.1.2.21.5.1.4 | TItemDescription | read-create | User-provided description for this filter log entry. |
| TFI tFilterLogDestination | 1.3.6.1.4.1.6527.3.1.2.21.5.1.3 | TFilterLogDestination | read-create | This object specifies the destination of the log. |
| T/F tFilterLogEnabled | 1.3.6.1.4.1.6527.3.1.2.21.5.1.9 | TruthValue | read-create | |
| tFilterLogEntry | 1.3.6.1.4.1.6527.3.1.2.21.5.1 | not-accessible | Information about a particular Filter Log entry. | |
| U32 tFilterLogFileId | 1.3.6.1.4.1.6527.3.1.2.21.5.1.7 | Unsigned32 | read-create | |
| tFilterLogGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.3 | The group of objects supporting management of filter log objects on Alcatel 7x50 SR series systems. | ||
| TFI tFilterLogId | 1.3.6.1.4.1.6527.3.1.2.21.5.1.1 | TFilterLogId | not-accessible | This is the index for the entry. An entry cannot be created with an id of 0. |
| G32 tFilterLogInstances | 1.3.6.1.4.1.6527.3.1.2.21.6.2 | Gauge32 | read-only | tFilterLogInstances maintains the instances of filter logs presently existing on the system |
| G32 tFilterLogMaxInstances | 1.3.6.1.4.1.6527.3.1.2.21.6.1 | Gauge32 | read-only | tFilterLogMaxInstances maintains the maximum allowed instances of filter logs allowed on the system |
| U32 tFilterLogMaxNumEntries | 1.3.6.1.4.1.6527.3.1.2.21.5.1.5 | Unsigned32 | read-create | This object specifies the maximum number of entries that the log (memory or file) can store. If tFilterLogDestination is not 'memory' then tFilterLogMaxNumEntries maintains a value of '0' |
| ROW tFilterLogRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.5.1.2 | RowStatus | read-create | This object allows entries to be created and deleted in the tFilterLogTable. |
| tFilterLogScalars | 1.3.6.1.4.1.6527.3.1.2.21.6 | |||
| T/F tFilterLogStopOnFull | 1.3.6.1.4.1.6527.3.1.2.21.5.1.8 | TruthValue | read-create | |
| TFI tFilterLogSummaryCrit1 | 1.3.6.1.4.1.6527.3.1.2.21.5.1.11 | TFilterLogSummaryCriterium | read-create | The value of tFilterLogSummaryCrit1 specifies how filter log entries will be summarized. This field is only meaningful if the object tFilterLogSummaryEnabled is set to true. |
| T/F tFilterLogSummaryEnabled | 1.3.6.1.4.1.6527.3.1.2.21.5.1.10 | TruthValue | read-create | The value of tFilterLogSummaryEnabled specifies whether or not summarization of filter log entries is performed. Summarization is only allowed in case tFilterLogDestination is set to syslog. |
| U32 tFilterLogSysLogId | 1.3.6.1.4.1.6527.3.1.2.21.5.1.6 | Unsigned32 | read-create | |
| tFilterLogTable | 1.3.6.1.4.1.6527.3.1.2.21.5 | not-accessible | A table of all filter logs. | |
| tFilterLogV5v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.18 | The group of objects supporting Filter Log Summarization on Alcatel 7x50 ESS/SR series systems 5.0 release. | ||
| tFilterMIBCompliances | 1.3.6.1.4.1.6527.3.1.1.21.1 | |||
| tFilterMIBConformance | 1.3.6.1.4.1.6527.3.1.1.21 | |||
| tFilterMIBGroups | 1.3.6.1.4.1.6527.3.1.1.21.2 | |||
| tFilterNotificationObjects | 1.3.6.1.4.1.6527.3.1.2.21.8 | |||
| tFilterNotificationObjGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.8 | The group of objects supporting management of filter notification objects on Alcatel 7x50 SR series systems. | ||
| tFilterNotificationObjV5v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.21 | The group of objects supporting management of filter notification objects on Alcatel 7x50 SR series systems. | ||
| tFilterNotifications | 1.3.6.1.4.1.6527.3.1.3.21.0 | |||
| tFilterNotificationsGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.9 | The group of notifications supporting management of filter notifications on Alcatel 7x50 SR series systems. | ||
| tFilterNotificationsPrefix | 1.3.6.1.4.1.6527.3.1.3.21 | |||
| tFilterObjects | 1.3.6.1.4.1.6527.3.1.2.21 | |||
| NUM tFilterParmRow | 1.3.6.1.4.1.6527.3.1.2.21.8.2 | RowPointer | accessible-for-notify | The value of the object tFilterParmRow indicates the OID of the row status of the applicable filter parameter table. This can be a row from either one of the following tables: - tIPFilterParamsTable; - tMacFilterParamsTable; or - tIPv6FilterParamsTable |
| INT tFilterPBRDropReason | 1.3.6.1.4.1.6527.3.1.2.21.8.1 | INTEGER | accessible-for-notify | Used by tIPFilterPBRPacketsDrop to report the failure reason code. |
| U32 tFilterRDAdminPriority | 1.3.6.1.4.1.6527.3.1.2.21.11.1.4 | Unsigned32 | read-create | tFilterRDAdminPriority holds the configured base priority for the destination. |
| TMN tFilterRDAdminState | 1.3.6.1.4.1.6527.3.1.2.21.11.1.6 | TmnxAdminState | read-create | tFilterRDAdminState maintains the configured state of the destination. If the admin state is 'outOfService', the tests for this destination will not be conducted. |
| TIT tFilterRDDescription | 1.3.6.1.4.1.6527.3.1.2.21.11.1.3 | TItemDescription | read-create | User-provided description for this destination is maintained in the object tFilterRDDescription. |
| U32 tFilterRDOperPriority | 1.3.6.1.4.1.6527.3.1.2.21.11.1.5 | Unsigned32 | read-only | tFilterRDAdminPriority maintains the operational value of the priority for this destination. The highest operational priority across multiple destinations is used as the preferred destination. A value of '0' is maintained if the destination if tFilterRDOperState is 'outOfService'. |
| TMN tFilterRDOperState | 1.3.6.1.4.1.6527.3.1.2.21.11.1.7 | TmnxOperState | read-only | The value of tFilterRDOperState indicates the operational state of the destination. |
| ROW tFilterRDRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.11.1.2 | RowStatus | read-create | tFilterRDRowStatus allows entries to be created and deleted in the tFilterRedirectDestTable. |
| IP tFilterRedirectDest | 1.3.6.1.4.1.6527.3.1.2.21.11.1.1 | IpAddress | not-accessible | tFilterRedirectDest holds the IP address of the destination entry. |
| tFilterRedirectDestEntry | 1.3.6.1.4.1.6527.3.1.2.21.11.1 | not-accessible | Information about a particular Redirect destination. Entries are created/deleted by user. | |
| tFilterRedirectDestTable | 1.3.6.1.4.1.6527.3.1.2.21.11 | not-accessible | Contains a List of all redirect destinations configured on this system. | |
| tFilterRedirectPingTestEntry | 1.3.6.1.4.1.6527.3.1.2.21.16.1 | not-accessible | Information about a specific Ping test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile. | |
| tFilterRedirectPingTestTable | 1.3.6.1.4.1.6527.3.1.2.21.16 | not-accessible | Contains a List of all redirect Ping tests configured on this system. | |
| TNA tFilterRedirectPolicy | 1.3.6.1.4.1.6527.3.1.2.21.10.1.1 | TNamedItem | not-accessible | tFilterRedirectPolicy uniquely identifies each redirect policy configured on this system. |
| tFilterRedirectPolicyEntry | 1.3.6.1.4.1.6527.3.1.2.21.10.1 | not-accessible | Information about a particular redirect policy. Entries are created/deleted by user. | |
| tFilterRedirectPolicyGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.4 | The group of objects supporting management of filter redirect policy objects on Alcatel 7x50 SR series systems. | ||
| tFilterRedirectPolicyTable | 1.3.6.1.4.1.6527.3.1.2.21.10 | not-accessible | Contains a List of all redirect policies configured on this system. | |
| tFilterRedirectSNMPRespEntry | 1.3.6.1.4.1.6527.3.1.2.21.13.1 | not-accessible | Information about action to be taken for a specific destination when a specific response is received. | |
| tFilterRedirectSNMPRespTable | 1.3.6.1.4.1.6527.3.1.2.21.13 | not-accessible | Each row in this table holds the effect of the test on the destination for a specific return value. | |
| TNA tFilterRedirectSNMPTest | 1.3.6.1.4.1.6527.3.1.2.21.12.1.1 | TNamedItem | not-accessible | tFilterRedirectSNMPTest specifies the name of the SNMP test. |
| tFilterRedirectSNMPTestEntry | 1.3.6.1.4.1.6527.3.1.2.21.12.1 | not-accessible | Information about a specific SNMP test configured for a destination. Entries are created/deleted by user. | |
| tFilterRedirectSNMPTestTable | 1.3.6.1.4.1.6527.3.1.2.21.12 | not-accessible | Contains a List of all redirect SNMP tests configured on this system. | |
| U32 tFilterRedirectURLHighRespCode | 1.3.6.1.4.1.6527.3.1.2.21.15.1.2 | Unsigned32 | not-accessible | tFilterRedirectURLHighRespCode specifies the higher return code of the range specified by this entry. |
| U32 tFilterRedirectURLLowRespCode | 1.3.6.1.4.1.6527.3.1.2.21.15.1.1 | Unsigned32 | not-accessible | tFilterRedirectURLLowRespCode specifies the lower return code of the range specified by this entry. |
| tFilterRedirectURLRespEntry | 1.3.6.1.4.1.6527.3.1.2.21.15.1 | not-accessible | Information about action to be taken for a specific destination when a return value within the range specified between tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode is received. | |
| tFilterRedirectURLRespTable | 1.3.6.1.4.1.6527.3.1.2.21.15 | not-accessible | Each row in this table holds the effect of the test on the destination for a range of return values. | |
| TNA tFilterRedirectURLTest | 1.3.6.1.4.1.6527.3.1.2.21.14.1.1 | TNamedItem | not-accessible | tFilterRedirectURLTest holds the name of the URL test. |
| tFilterRedirectURLTestEntry | 1.3.6.1.4.1.6527.3.1.2.21.14.1 | not-accessible | Information about a specific URL test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile. | |
| tFilterRedirectURLTestTable | 1.3.6.1.4.1.6527.3.1.2.21.14 | not-accessible | Contains a List of all redirect snmp tests configured on this system. | |
| IP tFilterRPActiveDest | 1.3.6.1.4.1.6527.3.1.2.21.10.1.5 | IpAddress | read-only | tFilterRPActiveDest indicates the IP address of the active destination. A value of 0 indicates that there is currently no active destination. |
| TMN tFilterRPAdminState | 1.3.6.1.4.1.6527.3.1.2.21.10.1.4 | TmnxAdminState | read-create | tFilterRPAdminState holds the admin state of the policy. If the admin state is 'outOfService', the tests will not be conducted. |
| TIT tFilterRPDescription | 1.3.6.1.4.1.6527.3.1.2.21.10.1.3 | TItemDescription | read-create | User-provided description for this redirect policy is maintained in the object tFilterRPDescription. |
| ROW tFilterRPRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.10.1.2 | RowStatus | read-create | tFilterRPRowStatus allows entries to be created and deleted in the tFilterRedirectPolicyTable. |
| U32 tFilterRPTDropCount | 1.3.6.1.4.1.6527.3.1.2.21.16.1.4 | Unsigned32 | read-create | The value of tFilterRPTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable. |
| U32 tFilterRPTHoldDown | 1.3.6.1.4.1.6527.3.1.2.21.16.1.5 | Unsigned32 | read-create | The value of tFilterRPTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable. |
| U32 tFilterRPTHoldDownRemain | 1.3.6.1.4.1.6527.3.1.2.21.16.1.6 | Unsigned32 | read-only | The value of tFilterRPTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again. |
| U32 tFilterRPTInterval | 1.3.6.1.4.1.6527.3.1.2.21.16.1.2 | Unsigned32 | read-create | The value of tFilterRPTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host. |
| INT tFilterRPTLastAction | 1.3.6.1.4.1.6527.3.1.2.21.16.1.8 | INTEGER | read-only | tFilterRPTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRPTHoldDown seconds. |
| TIM tFilterRPTLastActionTime | 1.3.6.1.4.1.6527.3.1.2.21.16.1.7 | TimeStamp | read-only | tFilterRPTLastActionTime maintains the time stamp when this test received a response for a probe sent out. |
| ROW tFilterRPTRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.16.1.1 | RowStatus | read-create | This object allows tests to be created and deleted in the tFilterRedirectPingTestTable. |
| U32 tFilterRPTTimeout | 1.3.6.1.4.1.6527.3.1.2.21.16.1.3 | Unsigned32 | read-create | The value of tFilterRPTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive. |
| STR tFilterRSTCommunity | 1.3.6.1.4.1.6527.3.1.2.21.12.1.4 | DisplayString | read-create | The value of tFilterRSTCommunity is the SNMPv1 or SNMPv2c Community String or the SNMPv3 Context Name used to conduct this SNMP test as described in RFC2571 and RFC2737. When the value of tFilterRSTSNMPVersion is 'snmpv1' or 'snmpv2c' this object represents a community string. When the value of tFilterRSTSNMPVersion is 'snmpv3' this object represents a SNMPv3 context name. |
| C32 tFilterRSTCounter32Val | 1.3.6.1.4.1.6527.3.1.2.21.13.1.7 | Counter32 | read-only | The value tFilterRSTRespType is 'counter32'. |
| C64 tFilterRSTCounter64Val | 1.3.6.1.4.1.6527.3.1.2.21.13.1.14 | Counter64 | read-only | The value tFilterRSTRespType is 'counter64'. |
| U32 tFilterRSTDropCount | 1.3.6.1.4.1.6527.3.1.2.21.12.1.8 | Unsigned32 | read-create | The value of tFilterRSTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable. |
| U32 tFilterRSTHoldDown | 1.3.6.1.4.1.6527.3.1.2.21.12.1.9 | Unsigned32 | read-create | The value of tFilterRSTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable. |
| U32 tFilterRSTHoldDownRemain | 1.3.6.1.4.1.6527.3.1.2.21.12.1.10 | Unsigned32 | read-only | The value of tFilterRSTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again. |
| I32 tFilterRSTInt32Val | 1.3.6.1.4.1.6527.3.1.2.21.13.1.10 | Integer32 | read-create | The value tFilterRSTRespType is 'integer32'. |
| U32 tFilterRSTInterval | 1.3.6.1.4.1.6527.3.1.2.21.12.1.6 | Unsigned32 | read-create | The value of tFilterRSTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host. |
| IP tFilterRSTIpAddressVal | 1.3.6.1.4.1.6527.3.1.2.21.13.1.12 | IpAddress | read-create | The value tFilterRSTRespType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTOctetStringVal column. |
| INT tFilterRSTLastAction | 1.3.6.1.4.1.6527.3.1.2.21.12.1.23 | INTEGER | read-only | tFilterRSTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRSTHoldDown seconds. |
| TIM tFilterRSTLastActionTime | 1.3.6.1.4.1.6527.3.1.2.21.12.1.11 | TimeStamp | read-only | tFilterRSTLastActionTime maintains the time stamp when this test received a response for a probe sent out. |
| C32 tFilterRSTLastCounter32Val | 1.3.6.1.4.1.6527.3.1.2.21.12.1.14 | Counter32 | read-only | The value tFilterRSTLastType is 'counter32'. |
| C64 tFilterRSTLastCounter64Val | 1.3.6.1.4.1.6527.3.1.2.21.12.1.21 | Counter64 | read-only | The value tFilterRSTLastType is 'counter64'. |
| I32 tFilterRSTLastInt32Val | 1.3.6.1.4.1.6527.3.1.2.21.12.1.17 | Integer32 | read-only | The value tFilterRSTLastType is 'integer32'. |
| IP tFilterRSTLastIpAddressVal | 1.3.6.1.4.1.6527.3.1.2.21.12.1.19 | IpAddress | read-only | The value tFilterRSTLastType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTLastOctetStringVal column. |
| OCT tFilterRSTLastOctetStringVal | 1.3.6.1.4.1.6527.3.1.2.21.12.1.18 | OCTET STRING | read-only | The value tFilterRSTLastType is 'octetString'. |
| OID tFilterRSTLastOID | 1.3.6.1.4.1.6527.3.1.2.21.12.1.12 | OBJECT IDENTIFIER | read-only | The object tFilterRSTLastOID holds the OID received in the response. |
| OID tFilterRSTLastOidVal | 1.3.6.1.4.1.6527.3.1.2.21.12.1.20 | OBJECT IDENTIFIER | read-only | The value tFilterRSTLastType is 'objectId'. |
| OPA tFilterRSTLastOpaqueVal | 1.3.6.1.4.1.6527.3.1.2.21.12.1.22 | Opaque | read-only | The value tFilterRSTLastType is 'opaque'. |
| I32 tFilterRSTLastPrioChange | 1.3.6.1.4.1.6527.3.1.2.21.12.1.24 | Integer32 | read-only | If the last action on the operational state of the destination i.e. tFilterRSTLastAction is 'enable', tFilterRSTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'. |
| TIK tFilterRSTLastTimeTicksVal | 1.3.6.1.4.1.6527.3.1.2.21.12.1.16 | TimeTicks | read-only | The value tFilterRSTLastType is 'timeTicks'. |
| INT tFilterRSTLastType | 1.3.6.1.4.1.6527.3.1.2.21.12.1.13 | INTEGER | read-only | tFilterRSTLastType maintains the type of the value received. A value of none(0) indicated that no value has been received |
| U32 tFilterRSTLastUnsigned32Val | 1.3.6.1.4.1.6527.3.1.2.21.12.1.15 | Unsigned32 | read-only | The value tFilterRSTLastType is 'unsigned32'. |
| I32 tFilterRSTNextRespIndex | 1.3.6.1.4.1.6527.3.1.2.21.12.1.25 | Integer32 | read-only | The value of tFilterRSTNextRespIndex indicates the next response index to be used while creating a row in the tFilterRedirectSNMPRespTable. The value of '-1' means that the maximum number of return values for this OID are already configured. |
| OCT tFilterRSTOctetStringVal | 1.3.6.1.4.1.6527.3.1.2.21.13.1.11 | OCTET STRING | read-create | The value tFilterRSTRespType is 'octetString'. |
| OID tFilterRSTOID | 1.3.6.1.4.1.6527.3.1.2.21.12.1.3 | OBJECT IDENTIFIER | read-create | tFilterRSTOID stores the OID of the object to be fetched from the destination. |
| OID tFilterRSTOidVal | 1.3.6.1.4.1.6527.3.1.2.21.13.1.13 | OBJECT IDENTIFIER | read-create | The value tFilterRSTRespType is 'objectId'. |
| OPA tFilterRSTOpaqueVal | 1.3.6.1.4.1.6527.3.1.2.21.13.1.15 | Opaque | read-create | The value tFilterRSTRespType is 'opaque'. |
| INT tFilterRSTRespAction | 1.3.6.1.4.1.6527.3.1.2.21.13.1.3 | INTEGER | read-create | tFilterRSTRespAction specifies the type of change that should be made to the destination priority tFilterRDOperPriority, if the return value is same as tFilterRSTRespId. |
| I32 tFilterRSTRespId | 1.3.6.1.4.1.6527.3.1.2.21.13.1.1 | Integer32 | not-accessible | tFilterRSTRespId holds the response value received from the destination. |
| OID tFilterRSTRespOID | 1.3.6.1.4.1.6527.3.1.2.21.13.1.5 | OBJECT IDENTIFIER | read-create | The object tFilterRSTRespOID holds the OID to be received in the response. |
| U32 tFilterRSTRespPrioChange | 1.3.6.1.4.1.6527.3.1.2.21.13.1.4 | Unsigned32 | read-create | tFilterRSTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRSTRespAction is either 'increase' or 'decrease'. |
| ROW tFilterRSTRespRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.13.1.2 | RowStatus | read-create | This object allows response strings to be specified for a specific test and the change it will cause to the priority of the destination. |
| INT tFilterRSTRespType | 1.3.6.1.4.1.6527.3.1.2.21.13.1.6 | INTEGER | read-create | tFilterRSTRespType maintains the type of the value to be received. |
| ROW tFilterRSTRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.12.1.2 | RowStatus | read-create | tFilterRSTRowStatus allows tests to be created and deleted in the tFilterRedirectSNMPTestTable. |
| INT tFilterRSTSNMPVersion | 1.3.6.1.4.1.6527.3.1.2.21.12.1.5 | INTEGER | read-create | tFilterRSTSNMPVersion specifies the SNMP PDU format to be used while conducting the test. |
| U32 tFilterRSTTimeout | 1.3.6.1.4.1.6527.3.1.2.21.12.1.7 | Unsigned32 | read-create | The value of tFilterRSTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive. |
| TIK tFilterRSTTimeTicksVal | 1.3.6.1.4.1.6527.3.1.2.21.13.1.9 | TimeTicks | read-create | The value tFilterRSTRespType is 'timeTicks'. |
| U32 tFilterRSTUnsigned32Val | 1.3.6.1.4.1.6527.3.1.2.21.13.1.8 | Unsigned32 | read-create | The value tFilterRSTRespType is 'unsigned32'. |
| U32 tFilterRUTDropCount | 1.3.6.1.4.1.6527.3.1.2.21.14.1.7 | Unsigned32 | read-create | The value of tFilterRUTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable. |
| U32 tFilterRUTHoldDown | 1.3.6.1.4.1.6527.3.1.2.21.14.1.8 | Unsigned32 | read-create | The value of tFilterRUTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable. |
| U32 tFilterRUTHoldDownRemain | 1.3.6.1.4.1.6527.3.1.2.21.14.1.9 | Unsigned32 | read-only | The value of tFilterRUTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again. |
| STR tFilterRUTHTTPVersion | 1.3.6.1.4.1.6527.3.1.2.21.14.1.4 | DisplayString | read-create | The HTTP Version to be used while performing the URL test. The system by default uses HTTP Version 1.1 until explicitly specified. |
| U32 tFilterRUTInterval | 1.3.6.1.4.1.6527.3.1.2.21.14.1.5 | Unsigned32 | read-create | The value of tFilterRUTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host. |
| INT tFilterRUTLastAction | 1.3.6.1.4.1.6527.3.1.2.21.14.1.12 | INTEGER | read-only | tFilterRUTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRUTHoldDown seconds. |
| TIM tFilterRUTLastActionTime | 1.3.6.1.4.1.6527.3.1.2.21.14.1.10 | TimeStamp | read-only | tFilterRUTLastActionTime maintains the time stamp when this test received a response for a probe sent out. |
| I32 tFilterRUTLastPrioChange | 1.3.6.1.4.1.6527.3.1.2.21.14.1.13 | Integer32 | read-only | If the last action on the operational state of the destination i.e. tFilterRUTLastAction is 'enable', tFilterRUTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'. |
| U32 tFilterRUTLastRetCode | 1.3.6.1.4.1.6527.3.1.2.21.14.1.11 | Unsigned32 | read-only | tFilterRUTLastRetCode holds the return code received in the last response. |
| INT tFilterRUTRespAction | 1.3.6.1.4.1.6527.3.1.2.21.15.1.4 | INTEGER | read-create | If the tFilterRUTRespAction is either 'increase' or 'decrease', tFilterRUTRespPrioChange specifies the offset to applied to the destination base priority tFilterRDAdminPriority to compute the tFilterRDOperPriority as a result of this test. If the tFilterRUTRespAction is set to 'disable', on the reception of the specified response, the destination will be deemed unusable and the tFilterRDOperPriority will be reset to '0'. |
| U32 tFilterRUTRespPrioChange | 1.3.6.1.4.1.6527.3.1.2.21.15.1.5 | Unsigned32 | read-create | tFilterRUTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRUTRespAction is either 'increase' or 'decrease'. |
| ROW tFilterRUTRespRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.15.1.3 | RowStatus | read-create | tFilterRUTRespRowStatus allows the mapping of a range of return codes returned from a specific test to the change it will cause to the priority of the destination. |
| ROW tFilterRUTRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.14.1.2 | RowStatus | read-create | tFilterRUTRowStatus allows tests to be created and deleted in the tFilterRedirectURLTestTable. |
| U32 tFilterRUTTimeout | 1.3.6.1.4.1.6527.3.1.2.21.14.1.6 | Unsigned32 | read-create | The value of tFilterRUTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive. |
| STR tFilterRUTURL | 1.3.6.1.4.1.6527.3.1.2.21.14.1.3 | DisplayString | read-create | This object holds the URL to be probed. |
| tFilterScalarGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.7 | The group of objects supporting management of filter scalar objects on Alcatel 7x50 SR series systems. | ||
| tFilterTimeStampObjects | 1.3.6.1.4.1.6527.3.1.2.21.9 | |||
| timetraFilterMIBModule | 1.3.6.1.4.1.6527.1.1.3.21 | This document is the SNMP MIB module to manage and provision Filter features on Alcatel 7x50 systems. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| TFI tIPFilterDefaultAction | 1.3.6.1.4.1.6527.3.1.2.21.1.1.5 | TFilterAction | read-create | The action to take for packets that do not match any filter entries. |
| TIT tIPFilterDescription | 1.3.6.1.4.1.6527.3.1.2.21.1.1.4 | TItemDescription | read-create | User-provided description for this filter. |
| tIPFilterEntry | 1.3.6.1.4.1.6527.3.1.2.21.1.1 | not-accessible | Information about a particular IP Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile. | |
| TIP tIPFilterId | 1.3.6.1.4.1.6527.3.1.2.21.1.1.1 | TIPFilterID | not-accessible | Uniquely identifies an ip filter as configures on this system. |
| TFI tIPFilterParamsAction | 1.3.6.1.4.1.6527.3.1.2.21.2.1.5 | TFilterActionOrDefault | read-create | The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. |
| IP tIPFilterParamsActiveDest | 1.3.6.1.4.1.6527.3.1.2.21.2.1.40 | IpAddress | read-only | tIPFilterParamsActiveDest indicates the IP address of the active destination for this IP filter. A value of 0 indicates that there is currently no active destination. |
| T/F tIPFilterParamsCflowdIfSample | 1.3.6.1.4.1.6527.3.1.2.21.2.1.34 | TruthValue | read-create | When tIPFilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router. |
| T/F tIPFilterParamsCflowdSample | 1.3.6.1.4.1.6527.3.1.2.21.2.1.33 | TruthValue | read-create | When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router. |
| TIT tIPFilterParamsDescription | 1.3.6.1.4.1.6527.3.1.2.21.2.1.4 | TItemDescription | read-create | User-provided description for this filter entry. |
| IP tIPFilterParamsDestinationIpAddr | 1.3.6.1.4.1.6527.3.1.2.21.2.1.13 | IpAddress | read-create | IP address to match the destination-ip of the packet. |
| ADR tIPFilterParamsDestinationIpMask | 1.3.6.1.4.1.6527.3.1.2.21.2.1.14 | IpAddressPrefixLength | read-create | If different from 0, the object tIPFilterParamsDestinationIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is 0, and the value of tIPFilterParamsDestIpFullMask is non zero then the value of tIPFilterParamsDestIpFullMask is used as mask. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, not matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsDestIpFullMask will be set to reflect this same mask. |
| IP tIPFilterParamsDestIpFullMask | 1.3.6.1.4.1.6527.3.1.2.21.2.1.49 | IpAddress | read-create | If different from 0, the object tIPFilterParamsDestIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, no matching is done on the Destination Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsDestIpFullMask then the value of tIPFilterParamsDestinationIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsDestinationIpMask will be set to 0. |
| TTC tIPFilterParamsDestPortOperator | 1.3.6.1.4.1.6527.3.1.2.21.2.1.21 | TTcpUdpPortOperator | read-create | The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsDestPortOperator is used as described in TTcpUdpPortOperator. |
| TTC tIPFilterParamsDestPortValue1 | 1.3.6.1.4.1.6527.3.1.2.21.2.1.19 | TTcpUdpPort | read-create | TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsDestPortOperator. |
| TTC tIPFilterParamsDestPortValue2 | 1.3.6.1.4.1.6527.3.1.2.21.2.1.20 | TTcpUdpPort | read-create | TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsDestPortOperator. |
| TDS tIPFilterParamsDSCP | 1.3.6.1.4.1.6527.3.1.2.21.2.1.22 | TDSCPNameOrEmpty | read-create | DSCP to be matched on the packet. |
| C64 tIPFilterParamsEgressHitCount | 1.3.6.1.4.1.6527.3.1.2.21.2.1.37 | Counter64 | read-only | This object indicates the number of times an egress packet matched this entry. |
| C64 tIPFilterParamsEgrHitByteCount | 1.3.6.1.4.1.6527.3.1.2.21.2.1.51 | Counter64 | read-only | The value of tIPFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry. |
| tIPFilterParamsEntry | 1.3.6.1.4.1.6527.3.1.2.21.2.1 | not-accessible | Information about a particular IP Filter entry. Every IP Filter can have zero or more IP Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. | |
| IP tIPFilterParamsForwardNH | 1.3.6.1.4.1.6527.3.1.2.21.2.1.6 | IpAddress | read-create | The ip-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
| T/F tIPFilterParamsForwardNHIndirect | 1.3.6.1.4.1.6527.3.1.2.21.2.1.7 | TruthValue | read-create | tIPFilterParamsForwardNHIndirect specifies if the nexthop is directly/ indirectly reachable. |
| STR tIPFilterParamsForwardNHInterface | 1.3.6.1.4.1.6527.3.1.2.21.2.1.35 | DisplayString | read-create | The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
| TNA tIPFilterParamsForwardRedPlcy | 1.3.6.1.4.1.6527.3.1.2.21.2.1.39 | TNamedItemOrEmpty | read-create | tIPFilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop. |
| TIT tIPFilterParamsFragment | 1.3.6.1.4.1.6527.3.1.2.21.2.1.24 | TItemMatch | read-create | If enabled, this object matches fragmented/unfragmented packets as per the value of the object. |
| TMN tIPFilterParamsFwdSapEncapVal | 1.3.6.1.4.1.6527.3.1.2.21.2.1.43 | TmnxEncapVal | read-create | tIPFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this IP filter entry. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination. |
| TMN tIPFilterParamsFwdSapPortId | 1.3.6.1.4.1.6527.3.1.2.21.2.1.42 | TmnxPortID | read-create | tIPFilterParamsFwdSapPortId specifies the sap port identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value. |
| SDP tIPFilterParamsFwdSdpBind | 1.3.6.1.4.1.6527.3.1.2.21.2.1.44 | SdpBindId | read-create | tIPFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSapEncapVal have a zero value. |
| TMN tIPFilterParamsFwdSvcId | 1.3.6.1.4.1.6527.3.1.2.21.2.1.41 | TmnxServId | read-only | tIPFilterParamsFwdSvcId indicates the service id of the destination for this IP filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination. |
| INT tIPFilterParamsIcmpCode | 1.3.6.1.4.1.6527.3.1.2.21.2.1.31 | INTEGER | read-create | Icmp code to be matched. tIPFilterParamsIcmpCode complements the object tIPFilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled. |
| INT tIPFilterParamsIcmpType | 1.3.6.1.4.1.6527.3.1.2.21.2.1.32 | INTEGER | read-create | Icmp type to be matched. tIPFilterParamsIcmpType complements the object tIPFilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled. |
| TEN tIPFilterParamsIndex | 1.3.6.1.4.1.6527.3.1.2.21.2.1.1 | TEntryId | not-accessible | This is the secondary index for the entry. Every ip filter can have multiple entries, therefore every ip filter entry is identified by the tIPFilterId and tIPFilterParamsIndex. |
| C64 tIPFilterParamsIngressHitCount | 1.3.6.1.4.1.6527.3.1.2.21.2.1.36 | Counter64 | read-only | This object indicates the number of times an ingress packet matched this entry. |
| C64 tIPFilterParamsIngrHitByteCount | 1.3.6.1.4.1.6527.3.1.2.21.2.1.50 | Counter64 | read-only | The value of tIPFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry. |
| TIP tIPFilterParamsIpOptionMask | 1.3.6.1.4.1.6527.3.1.2.21.2.1.27 | TIpOption | read-create | Mask is ANDed with the ip-option before being compared to tIPFilterParamsIpOptionValue. |
| TIP tIPFilterParamsIpOptionValue | 1.3.6.1.4.1.6527.3.1.2.21.2.1.26 | TIpOption | read-create | The value of the specific ip-option to match. |
| TFI tIPFilterParamsLogId | 1.3.6.1.4.1.6527.3.1.2.21.2.1.3 | TFilterLogId | read-create | This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled. |
| T/F tIPFilterParamsLogInstantiated | 1.3.6.1.4.1.6527.3.1.2.21.2.1.38 | TruthValue | read-only | tIPFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not. |
| TIT tIPFilterParamsMultipleOption | 1.3.6.1.4.1.6527.3.1.2.21.2.1.28 | TItemMatch | read-create | If enabled, matches multiple options as per the value of the object. |
| TIT tIPFilterParamsOptionPresent | 1.3.6.1.4.1.6527.3.1.2.21.2.1.25 | TItemMatch | read-create | If enabled, this object matches packets if they have options present or not as per the value of the object. |
| TIP tIPFilterParamsProtocol | 1.3.6.1.4.1.6527.3.1.2.21.2.1.15 | TIpProtocol | read-create | IP protocol to match. set to -1 to disable matching IP protocol. If the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tIPFilterParamsTcpSyn and tIPFilterParamsTcpAck will be turned off. |
| STR tIPFilterParamsRedirectURL | 1.3.6.1.4.1.6527.3.1.2.21.2.1.47 | DisplayString | read-create | The value of tIPFilterParamsRedirectURL specifies the URL to redirect to, when the value of tIPFilterParamsAction is 'httpRedirect'. |
| DOT tIPFilterParamsRemarkDot1p | 1.3.6.1.4.1.6527.3.1.2.21.2.1.10 | Dot1PPriority | read-create | tIPFilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry. |
| TDS tIPFilterParamsRemarkDSCP | 1.3.6.1.4.1.6527.3.1.2.21.2.1.8 | TDSCPFilterActionValue | read-create | The DSCP value that should be remarked in case a packet hits this filter entry. |
| TDS tIPFilterParamsRemarkDSCPMask | 1.3.6.1.4.1.6527.3.1.2.21.2.1.9 | TDSCPFilterActionValue | read-create | tIPFilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value. |
| ROW tIPFilterParamsRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.2.1.2 | RowStatus | read-create | This object allows entries to be created and deleted in the tIPFilterParamsTable. |
| IP tIPFilterParamsSourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.21.2.1.11 | IpAddress | read-create | IP address to match the source-ip of the packet. |
| ADR tIPFilterParamsSourceIpMask | 1.3.6.1.4.1.6527.3.1.2.21.2.1.12 | IpAddressPrefixLength | read-create | If different from 0, the object tIPFilterParamsSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is 0, and the value of tIPFilterParamsSrcIpFullMask is non zero then the value of tIPFilterParamsSrcIpFullMask is used as mask. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, not matching is done on the source Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsSrcIpFullMask will be set to reflect this same mask. |
| TTC tIPFilterParamsSourcePortOperator | 1.3.6.1.4.1.6527.3.1.2.21.2.1.18 | TTcpUdpPortOperator | read-create | The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TTcpUdpPortOperator. |
| TTC tIPFilterParamsSourcePortValue1 | 1.3.6.1.4.1.6527.3.1.2.21.2.1.16 | TTcpUdpPort | read-create | TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator. |
| TTC tIPFilterParamsSourcePortValue2 | 1.3.6.1.4.1.6527.3.1.2.21.2.1.17 | TTcpUdpPort | read-create | TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator. |
| IP tIPFilterParamsSrcIpFullMask | 1.3.6.1.4.1.6527.3.1.2.21.2.1.48 | IpAddress | read-create | If different from 0, the object tIPFilterParamsSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, no matching is done on the Source Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsSrcIpFullMask then the value of tIPFilterParamsSourceIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsSourceIpMask will be set to 0. |
| tIPFilterParamsTable | 1.3.6.1.4.1.6527.3.1.2.21.2 | not-accessible | A table of all IP filter match entries for all IP filters. | |
| TIT tIPFilterParamsTcpAck | 1.3.6.1.4.1.6527.3.1.2.21.2.1.30 | TItemMatch | read-create | If Enabled, matches a TCP Ack as per value of the object. |
| TIT tIPFilterParamsTcpSyn | 1.3.6.1.4.1.6527.3.1.2.21.2.1.29 | TItemMatch | read-create | If Enabled, matches a TCP Syn as per value of the object. |
| TNA tIPFilterParamsTimeRangeName | 1.3.6.1.4.1.6527.3.1.2.21.2.1.45 | TNamedItemOrEmpty | read-create | tIPFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName. |
| TTI tIPFilterParamsTimeRangeState | 1.3.6.1.4.1.6527.3.1.2.21.2.1.46 | TTimeRangeState | read-only | tIPFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems. |
| NTF tIPFilterPBRPacketsDrop | 1.3.6.1.4.1.6527.3.1.3.21.0.1 | The tIPFilterPBRPacketsDrop event is generated either when the configuration of a forwarding action refers to an invalid/unconfigured next-hop or if the active interface goes down operationally in the process of active filtering. | ||
| ROW tIPFilterRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.1.1.2 | RowStatus | read-create | This object allows entries to be created and deleted in the tIPFilterTable. |
| TIT tIPFilterScope | 1.3.6.1.4.1.6527.3.1.2.21.1.1.3 | TItemScope | read-create | This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2). |
| tIPFilterTable | 1.3.6.1.4.1.6527.3.1.2.21.1 | not-accessible | Contains a List of all ip filters configured on this system. | |
| tIPFilterV4v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.12 | The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 4.0 release. | ||
| tIPFilterV5v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.17 | The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 5.0 release. | ||
| tIPFilterV6v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.22 | The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 6.0 release. | ||
| TFI tIPv6FilterDefaultAction | 1.3.6.1.4.1.6527.3.1.2.21.18.1.5 | TFilterAction | read-create | The value of the object tIPv6FilterDefaultAction specifies the action to be taken for packets that do not match any of the filter entries. |
| TIT tIPv6FilterDescription | 1.3.6.1.4.1.6527.3.1.2.21.18.1.4 | TItemDescription | read-create | The value of the object tIPv6FilterDescription specifies a user-provided description for this filter. |
| tIPv6FilterEntry | 1.3.6.1.4.1.6527.3.1.2.21.18.1 | not-accessible | Information about a particular IPv6 Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile. | |
| TIP tIPv6FilterId | 1.3.6.1.4.1.6527.3.1.2.21.18.1.1 | TIPFilterID | not-accessible | The value of the object tIPv6FilterId uniquely identifies a IPv6 filter on this system. |
| TFI tIPv6FilterParamsAction | 1.3.6.1.4.1.6527.3.1.2.21.19.1.5 | TFilterActionOrDefault | read-create | The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. |
| ADR tIPv6FilterParamsActiveDest | 1.3.6.1.4.1.6527.3.1.2.21.19.1.34 | InetAddressIPv6 | read-only | tIPv6FilterParamsActiveDest indicates the IPv6 address of the active destination for this IPv6 filter. A value of 0 indicates that there is currently no active destination. |
| T/F tIPv6FilterParamsCflowdIfSample | 1.3.6.1.4.1.6527.3.1.2.21.19.1.28 | TruthValue | read-create | When tIPv6FilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router. |
| T/F tIPv6FilterParamsCflowdSample | 1.3.6.1.4.1.6527.3.1.2.21.19.1.27 | TruthValue | read-create | When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router. |
| TIT tIPv6FilterParamsDescription | 1.3.6.1.4.1.6527.3.1.2.21.19.1.4 | TItemDescription | read-create | User-provided description for this filter entry. |
| ADR tIPv6FilterParamsDestinationIpAddr | 1.3.6.1.4.1.6527.3.1.2.21.19.1.13 | InetAddressIPv6 | read-create | IPv6 address to match the destination-ip of the packet. |
| ADR tIPv6FilterParamsDestinationIpMask | 1.3.6.1.4.1.6527.3.1.2.21.19.1.14 | InetAddressPrefixLength | read-create | The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsDestinationIpAddr. |
| TTC tIPv6FilterParamsDestPortOperator | 1.3.6.1.4.1.6527.3.1.2.21.19.1.21 | TTcpUdpPortOperator | read-create | The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used. |
| TTC tIPv6FilterParamsDestPortValue1 | 1.3.6.1.4.1.6527.3.1.2.21.19.1.19 | TTcpUdpPort | read-create | TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator. |
| TTC tIPv6FilterParamsDestPortValue2 | 1.3.6.1.4.1.6527.3.1.2.21.19.1.20 | TTcpUdpPort | read-create | TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator. |
| TDS tIPv6FilterParamsDSCP | 1.3.6.1.4.1.6527.3.1.2.21.19.1.22 | TDSCPNameOrEmpty | read-create | DSCP to be matched on the packet. |
| C64 tIPv6FilterParamsEgressHitCount | 1.3.6.1.4.1.6527.3.1.2.21.19.1.31 | Counter64 | read-only | This object indicates the number of times an egress packet matched this entry. |
| C64 tIPv6FilterParamsEgrHitByteCount | 1.3.6.1.4.1.6527.3.1.2.21.19.1.38 | Counter64 | read-only | This tIPv6FilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry. |
| tIPv6FilterParamsEntry | 1.3.6.1.4.1.6527.3.1.2.21.19.1 | not-accessible | Information about a particular IPv6 Filter entry. Every IPv6 Filter can have zero or more IPv6 Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. | |
| ADR tIPv6FilterParamsForwardNH | 1.3.6.1.4.1.6527.3.1.2.21.19.1.6 | InetAddressIPv6 | read-create | The ipv6-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
| T/F tIPv6FilterParamsForwardNHIndirect | 1.3.6.1.4.1.6527.3.1.2.21.19.1.7 | TruthValue | read-create | tIPv6FilterParamsForwardNHIndirect specifies if the nexthop is directly or indirectly reachable. |
| STR tIPv6FilterParamsForwardNHInterface | 1.3.6.1.4.1.6527.3.1.2.21.19.1.29 | DisplayString | read-create | The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
| TNA tIPv6FilterParamsForwardRedPlcy | 1.3.6.1.4.1.6527.3.1.2.21.19.1.33 | TNamedItemOrEmpty | read-create | tIPv6FilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop. |
| INT tIPv6FilterParamsIcmpCode | 1.3.6.1.4.1.6527.3.1.2.21.19.1.25 | INTEGER | read-create | Icmp code to be matched. tIPv6FilterParamsIcmpCode complements the object tIPv6FilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled. |
| INT tIPv6FilterParamsIcmpType | 1.3.6.1.4.1.6527.3.1.2.21.19.1.26 | INTEGER | read-create | Icmp type to be matched. tIPv6FilterParamsIcmpType complements the object tIPv6FilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled. |
| TEN tIPv6FilterParamsIndex | 1.3.6.1.4.1.6527.3.1.2.21.19.1.1 | TEntryId | not-accessible | This is the secondary index for the entry. Every IPv6 filter can have multiple entries, therefore every IPv6 filter entry is identified by the tIPv6FilterId and tIPv6FilterParamsIndex. |
| C64 tIPv6FilterParamsIngressHitCount | 1.3.6.1.4.1.6527.3.1.2.21.19.1.30 | Counter64 | read-only | This object indicates the number of times an ingress packet matched this entry. |
| C64 tIPv6FilterParamsIngrHitByteCount | 1.3.6.1.4.1.6527.3.1.2.21.19.1.37 | Counter64 | read-only | The value of tIPv6FilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry. |
| TFI tIPv6FilterParamsLogId | 1.3.6.1.4.1.6527.3.1.2.21.19.1.3 | TFilterLogId | read-create | This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled. |
| T/F tIPv6FilterParamsLogInstantiated | 1.3.6.1.4.1.6527.3.1.2.21.19.1.32 | TruthValue | read-only | tIPv6FilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not. |
| TIP tIPv6FilterParamsNextHeader | 1.3.6.1.4.1.6527.3.1.2.21.19.1.15 | TIpProtocol | read-create | IPv6 next header to match. set to -1 to disable matching IPv6 next header. If the next header is changed the next header specific parameters are reset. For instance if next header is changed from TCP to UDP, then the objects tIPv6FilterParamsTcpSyn and tIPv6FilterParamsTcpAck will be turned off. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60. |
| DOT tIPv6FilterParamsRemarkDot1p | 1.3.6.1.4.1.6527.3.1.2.21.19.1.10 | Dot1PPriority | read-create | tIPv6FilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry. |
| TDS tIPv6FilterParamsRemarkDSCP | 1.3.6.1.4.1.6527.3.1.2.21.19.1.8 | TDSCPFilterActionValue | read-create | The DSCP value that should be remarked in case a packet hits this filter entry. |
| TDS tIPv6FilterParamsRemarkDSCPMask | 1.3.6.1.4.1.6527.3.1.2.21.19.1.9 | TDSCPFilterActionValue | read-create | tIPv6FilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value. |
| ROW tIPv6FilterParamsRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.19.1.2 | RowStatus | read-create | This object allows entries to be created and deleted in the tIPv6FilterParamsTable. |
| ADR tIPv6FilterParamsSourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.21.19.1.11 | InetAddressIPv6 | read-create | IPv6 address to match the source-ip of the packet. |
| ADR tIPv6FilterParamsSourceIpMask | 1.3.6.1.4.1.6527.3.1.2.21.19.1.12 | InetAddressPrefixLength | read-create | The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsSourceIpAddr. |
| TTC tIPv6FilterParamsSourcePortOperator | 1.3.6.1.4.1.6527.3.1.2.21.19.1.18 | TTcpUdpPortOperator | read-create | The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. |
| TTC tIPv6FilterParamsSourcePortValue1 | 1.3.6.1.4.1.6527.3.1.2.21.19.1.16 | TTcpUdpPort | read-create | TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator. |
| TTC tIPv6FilterParamsSourcePortValue2 | 1.3.6.1.4.1.6527.3.1.2.21.19.1.17 | TTcpUdpPort | read-create | TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator. |
| tIPv6FilterParamsTable | 1.3.6.1.4.1.6527.3.1.2.21.19 | not-accessible | A table of all IPv6 filter match entries for all IPv6 filters. | |
| TIT tIPv6FilterParamsTcpAck | 1.3.6.1.4.1.6527.3.1.2.21.19.1.24 | TItemMatch | read-create | If Enabled, matches a TCP Ack as per value of the object. |
| TIT tIPv6FilterParamsTcpSyn | 1.3.6.1.4.1.6527.3.1.2.21.19.1.23 | TItemMatch | read-create | If Enabled, matches a TCP Syn as per value of the object. |
| TNA tIPv6FilterParamsTimeRangeName | 1.3.6.1.4.1.6527.3.1.2.21.19.1.35 | TNamedItemOrEmpty | read-create | tIPv6FilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName. |
| TTI tIPv6FilterParamsTimeRangeState | 1.3.6.1.4.1.6527.3.1.2.21.19.1.36 | TTimeRangeState | read-only | tIPv6FilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPv6FilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems. |
| ROW tIPv6FilterRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.18.1.2 | RowStatus | read-create | The value of the object tIPv6FilterRowStatus specifies the status of the IPv6 filter. The object allows entries to be created and deleted in the tIPv6FilterTable. |
| TIT tIPv6FilterScope | 1.3.6.1.4.1.6527.3.1.2.21.18.1.3 | TItemScope | read-create | The value of the object tIPv6FilterScope specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2). |
| tIPv6FilterTable | 1.3.6.1.4.1.6527.3.1.2.21.18 | not-accessible | Contains a List of all IPv6 filters configured on this system. | |
| tIPv6FilterV4v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.11 | The group of objects supporting management of IPv6 filter objects on Alcatel 7x50 SR series systems. | ||
| tIPv6FilterV6v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.24 | The group of objects supporting management of IPv6 filter objects on Alcatel 7x50 SR series systems. | ||
| TFI tMacFilterDefaultAction | 1.3.6.1.4.1.6527.3.1.2.21.3.1.5 | TFilterAction | read-create | The action to take for packets that do not match any filter entries. |
| TIT tMacFilterDescription | 1.3.6.1.4.1.6527.3.1.2.21.3.1.4 | TItemDescription | read-create | User-provided description for this filter. |
| tMacFilterEntry | 1.3.6.1.4.1.6527.3.1.2.21.3.1 | not-accessible | Information about a particular MAC Filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile. | |
| TMA tMacFilterId | 1.3.6.1.4.1.6527.3.1.2.21.3.1.1 | TMACFilterID | not-accessible | Uniquely identifies a mac filter as configures on this system. |
| TFI tMacFilterParamsAction | 1.3.6.1.4.1.6527.3.1.2.21.4.1.5 | TFilterActionOrDefault | read-create | The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. |
| TIT tMacFilterParamsDescription | 1.3.6.1.4.1.6527.3.1.2.21.4.1.4 | TItemDescription | read-create | User-provided description for this filter entry. |
| DOT tMacFilterParamsDot1pMask | 1.3.6.1.4.1.6527.3.1.2.21.4.1.13 | Dot1PPriority | read-create | IEEE 802.1p priority mask value for this policy MAC filter entry. Use zero to disable matching, use 7 to match everything. |
| DOT tMacFilterParamsDot1pValue | 1.3.6.1.4.1.6527.3.1.2.21.4.1.12 | Dot1PPriority | read-create | IEEE 802.1p priority value for this policy MAC filter entry. Use -1 to disable matching this filter criteria. |
| NUM tMacFilterParamsDsap | 1.3.6.1.4.1.6527.3.1.2.21.4.1.15 | ServiceAccessPoint | read-create | MAC DSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
| NUM tMacFilterParamsDsapMask | 1.3.6.1.4.1.6527.3.1.2.21.4.1.16 | ServiceAccessPoint | read-create | MAC DSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
| MAC tMacFilterParamsDstMAC | 1.3.6.1.4.1.6527.3.1.2.21.4.1.10 | MacAddress | read-create | Destination MAC mask value for this policy MAC filter entry. |
| MAC tMacFilterParamsDstMACMask | 1.3.6.1.4.1.6527.3.1.2.21.4.1.11 | MacAddress | read-create | Destination MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria. |
| C64 tMacFilterParamsEgressHitCount | 1.3.6.1.4.1.6527.3.1.2.21.4.1.22 | Counter64 | read-only | This object indicates the number of times an egress packet matched this entry. |
| C64 tMacFilterParamsEgrHitByteCount | 1.3.6.1.4.1.6527.3.1.2.21.4.1.32 | Counter64 | read-only | The value of tMacFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry. |
| tMacFilterParamsEntry | 1.3.6.1.4.1.6527.3.1.2.21.4.1 | not-accessible | Information about a particular MAC Filter entry. Every MAC Filter can have zero or more MAC Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. | |
| INT tMacFilterParamsEtherType | 1.3.6.1.4.1.6527.3.1.2.21.4.1.14 | INTEGER | read-create | Ethertype for this policy MAC filter entry. Use -1 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to Ethernet_II. |
| TFR tMacFilterParamsFrameType | 1.3.6.1.4.1.6527.3.1.2.21.4.1.6 | TFrameType | read-create | The type of mac frame for which we are defining this match criteria. |
| TMN tMacFilterParamsFwdSapEncapVal | 1.3.6.1.4.1.6527.3.1.2.21.4.1.26 | TmnxEncapVal | read-create | tMacFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this Mac filter entry. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, the tMacFilterParamsFwdSapPortId object has a non zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination. |
| TMN tMacFilterParamsFwdSapPortId | 1.3.6.1.4.1.6527.3.1.2.21.4.1.25 | TmnxPortID | read-create | tMacFilterParamsFwdSapPortId specifies the sap port identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value. |
| SDP tMacFilterParamsFwdSdpBind | 1.3.6.1.4.1.6527.3.1.2.21.4.1.27 | SdpBindId | read-create | tMacFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSapEncapVal have a zero value. |
| TMN tMacFilterParamsFwdSvcId | 1.3.6.1.4.1.6527.3.1.2.21.4.1.24 | TmnxServId | read-only | tMacFilterParamsFwdSvcId indicates the service id of the destination for this Mac filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination. |
| TEN tMacFilterParamsIndex | 1.3.6.1.4.1.6527.3.1.2.21.4.1.1 | TEntryId | not-accessible | This is the secondary index for the entry. Every mac filter can have multiple entries, therefore every mac filter entry is identified by the tMacFilterId and tMacFilterParamsIndex. |
| C64 tMacFilterParamsIngressHitCount | 1.3.6.1.4.1.6527.3.1.2.21.4.1.21 | Counter64 | read-only | This object indicates the number of times an ingress packet matched this entry. |
| C64 tMacFilterParamsIngrHitByteCount | 1.3.6.1.4.1.6527.3.1.2.21.4.1.31 | Counter64 | read-only | The value of tMacFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry. |
| TFI tMacFilterParamsLogId | 1.3.6.1.4.1.6527.3.1.2.21.4.1.3 | TFilterLogId | read-create | This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled. |
| T/F tMacFilterParamsLogInstantiated | 1.3.6.1.4.1.6527.3.1.2.21.4.1.23 | TruthValue | read-only | tMacFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not. |
| STR tMacFilterParamsRedirectURL | 1.3.6.1.4.1.6527.3.1.2.21.4.1.30 | DisplayString | read-create | The value of tMacFilterParamsRedirectURL specifies the URL to redirect to, when the value of tMacFilterParamsAction is 'httpRedirect'. |
| ROW tMacFilterParamsRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.4.1.2 | RowStatus | read-create | This object allows entries to be created and deleted in the tMacFilterParamsTable. |
| INT tMacFilterParamsSnapOui | 1.3.6.1.4.1.6527.3.1.2.21.4.1.20 | INTEGER | read-create | MAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what to match. Matching can be disabled by the use of the value off(1). This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2SNAP. |
| INT tMacFilterParamsSnapPid | 1.3.6.1.4.1.6527.3.1.2.21.4.1.19 | INTEGER | read-create | MAC SNAP PID to match for this policy MAC filter entry. use -1 to disable matching by this criteria. This object has no significance if object tMacFilterParamsFrameType is not set to 802dot2SNAP. |
| MAC tMacFilterParamsSrcMAC | 1.3.6.1.4.1.6527.3.1.2.21.4.1.8 | MacAddress | read-create | Source MAC to match for this policy MAC filter entry. |
| MAC tMacFilterParamsSrcMACMask | 1.3.6.1.4.1.6527.3.1.2.21.4.1.9 | MacAddress | read-create | Source MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria. |
| NUM tMacFilterParamsSsap | 1.3.6.1.4.1.6527.3.1.2.21.4.1.17 | ServiceAccessPoint | read-create | MAC SSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
| NUM tMacFilterParamsSsapMask | 1.3.6.1.4.1.6527.3.1.2.21.4.1.18 | ServiceAccessPoint | read-create | MAC SSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
| tMacFilterParamsTable | 1.3.6.1.4.1.6527.3.1.2.21.4 | not-accessible | A table of all MAC filter match entries for all MAC filters. | |
| TNA tMacFilterParamsTimeRangeName | 1.3.6.1.4.1.6527.3.1.2.21.4.1.28 | TNamedItemOrEmpty | read-create | tMacFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName. |
| TTI tMacFilterParamsTimeRangeState | 1.3.6.1.4.1.6527.3.1.2.21.4.1.29 | TTimeRangeState | read-only | tMacFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tMacFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tMacFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tMacFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems. |
| ROW tMacFilterRowStatus | 1.3.6.1.4.1.6527.3.1.2.21.3.1.2 | RowStatus | read-create | This object allows entries to be created and deleted in the tMacFilterTable. |
| TIT tMacFilterScope | 1.3.6.1.4.1.6527.3.1.2.21.3.1.3 | TItemScope | read-create | This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2). |
| tMacFilterTable | 1.3.6.1.4.1.6527.3.1.2.21.3 | not-accessible | Contains a List of all mac filters configured on this system. | |
| tMacFilterV4v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.13 | The group of objects supporting management of mac filter objects on Alcatel 7x50 SR series systems 4.0 release. | ||
| tMacFilterV6v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.23 | The group of objects supporting management of mac filter objects on Alcatel 7x50 SR series systems 6.0 release. | ||
| tmnxFilterObsoleteGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.15 | The group of objects in ALCATEL-IND1-TIMETRA-FILTER-MIB which are obsoleted. | ||
| tTodPolicies77450V5v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.19 | The group of objects supporting management of time of day policy related objects on Alcatel 7450 ESS series systems 5.0 release. | ||
| tTodPolicies77x0V5v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.20 | The group of objects supporting management of time of day policy related objects on Alcatel 77x0 series systems 5.0 release. | ||
| tTodPoliciesV4v0Group | 1.3.6.1.4.1.6527.3.1.1.21.2.14 | The group of objects supporting management of time of day policy related objects on Alcatel 7x50 SR series systems 4.0 release. | ||
| tToDPoliciesV5v0NotifyGroup | 1.3.6.1.4.1.6527.3.1.1.21.2.16 | The group of notifications generated by the time of time of day policy feature on Alcatel 7x50 SR series systems 5.0 release. |
RFC description
Alcatel 7750 SR service router filter MIB for managing ACL-based IPv4/IPv6 traffic filter policies and entries.
Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.