ALCATEL-IND1-UDP-RELAY-MIB

All MIBs › ALCATEL-IND1-UDP-RELAY-MIB

Organization: Alcatel -Architects Of An Internet World

Last Updated: 2007-04-03

Category: IP and Core Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch UDP relay (IP helper) MIB for managing broadcast-to-unicast forwarding for DHCP and other protocols.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-UDP-RELAY-MIB?

ALCATEL-IND1-UDP-RELAY-MIB is an Alcatel-Lucent OmniSwitch proprietary MIB for the UDP Relay (IP helper) feature, which forwards broadcast UDP requests such as BOOTP/DHCP across VLAN boundaries to a configured server. It exposes a per-next-hop statistics table tracking packets transmitted and received, along with counters for specific error/violation conditions: invalid agent information option from the server, maximum-hops violations, forward-delay violations, agent-information violations, and invalid gateway IP. Its monitoring focus is software/protocol-relay health: a rising error counter directly indicates DHCP relay requests are being dropped rather than forwarded, which would manifest as clients failing to obtain IP addresses. It builds on the standard BOOTP/DHCP relay-agent concept (including DHCP option 82) rather than introducing a new relay protocol. It is deployed on OmniSwitch access/aggregation switches acting as DHCP relay agents between end-user VLANs and a central DHCP server. Engineers can download the ALCATEL-IND1-UDP-RELAY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-UDP-RELAY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch access/aggregation switches

Monitoring Examples

An operator would poll iphelperStatTable/iphelperStatEntry for a given iphelperStatsNextHopIpAddr, comparing iphelperTxToNextHop against iphelperRxFromClient to confirm relay traffic volume is as expected. A climbing iphelperMaxHopsViolation or iphelperForwDelayViolation counter would indicate DHCP requests are being discarded because they exceeded the configured iphelperMaxHops or iphelperForwDelay threshold, explaining reports of clients failing to lease an address. A rise in iphelperInvalidGatewayIP or iphelperAgentInfoViolation would point to a misconfigured relay gateway or Option 82 mismatch between the switch and DHCP server.

What Can Be Monitored

DHCP/BOOTP relay packet counters (tx/rx)
max-hops violation count
forward-delay violation count
agent-information (Option 82) violation count
invalid gateway IP count

Imported Objects

From ALCATEL-IND1-BASE

routingIND1UdpRelay

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using iphelperRxFromClient OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type iphelperRxFromClient into the Find box to locate it in the OID tree, then select it and click OK. This keeps track of the number of packets recieved from the client. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1UDPRelayMIB	1.3.6.1.4.1.6486.801.1.2.1.10.9.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line UDP Relay to forward BOOTP/DHCP requests across VLANs The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1UDPRelayNotificationObjects	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.0			Branch For UDP Relay Notification Objects.
NTF alaDhcpClientAddressAddTrap	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.0.1			When new IP address is assigned to DHCP Client interface.
NTF alaDhcpClientAddressExpiryTrap	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.0.2			When the lease time expires or when DHCP client not able to renew/rebind an IP address.
NTF alaDhcpClientAddressModifyTrap	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.0.3			When the dhcp client not able to obtain the existing IP address and new IP address is assigned to the DHCP client.
alcatelIND1UDPRelayMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1			Branch For UDP Relay Subsystem Managed Objects.
iphelperMIB	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1
iphelperTable	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1		not-accessible	A list of next hop IP Address for the DHCP Relay Agent.
iphelperEntry	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1		not-accessible	An entry in the ip helper table
U32 iphelperVlan	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.1	Unsigned32	not-accessible	This object is applicable when iphelperForwardOption is equal to perVlan (2). On Per VLAN mod the next hop IP Address corresponds to specific source VLAN. Based on the VLAN that the DHCP packet comes to the DHCP Relay Agent the packet is forwarded to the next hop defined for that VLAN. When iphelperForwardOption is standard (1), this field will be zero (0).
IP iphelperNextHopIpAddress	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.2	IpAddress	not-accessible	This specifies the next hop IP Address of the DHCP Relay Agent is to forward the DHCP packet.
U32 iphelperResetSrvStats	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.3	Unsigned32	read-create	When set to 1, will reset all the statistic for this server. On standard mode vlan will be zero. After the reset operation, system will change this back to a zero (0). Subsystem will always return zero (0).
ROW iphelperRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.4	RowStatus	read-create	Row Status for creating/deleting
iphelperStatTable	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2		not-accessible	This keeps statistics for each next hop IP Address.
iphelperStatEntry	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1		not-accessible	An entry in the stat table.
U32 iphelperStatsVlan	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.1	Unsigned32	not-accessible	This object is zero (0) when iphelperForwardOption is equal to standard (1). On Per VLAN mod the next hop IP Address corresponds to specific source VLAN. Based on the VLAN that the DHCP packet comes to the DHCP Relay Agent the packet is forwarded to the next hop defined for that VLAN. When iphelperForwardOption is standard (1), this field will be zero (0).
IP iphelperStatsNextHopIpAddr	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.2	IpAddress	not-accessible	This specifies the unique server address.
C32 iphelperTxToNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.3	Counter32	read-only	This keeps track of the number of packets transmitted to the server.
C32 iphelperInvalidAgentInfoOptFrmSrver	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.4	Counter32	read-only	This keeps track of the number of packets dropped due to invalid from DHCP server with Relay Agent Information option in the DHCP packet.
C32 iphelperRxFromClientEx	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.3	Counter32	read-only	This keeps track of the number of packets recieved from the client.
C32 iphelperMaxHopsViolation	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.4	Counter32	read-only	This keeps track of the number of packets dropped due to max hops violation.
C32 iphelperForwDelayViolation	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.5	Counter32	read-only	This keeps track of the number of packets dropped due to forward delay violation.
C32 iphelperAgentInfoViolation	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.6	Counter32	read-only	This keeps track of the number of packets dropped due to DHCP packet with giaddr field not equal to zero and Relay Agent Information option is present and also the Relay Agent Information Policy is set to DROP.
C32 iphelperInvalidGatewayIP	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.7	Counter32	read-only	This keeps track of the number of packets dropped due to giaddr matching a local subnet and Relay Agent Information option is present in the DHCP packet.
U32 iphelperForwDelay	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8	Unsigned32	read-write	This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. It is typically set as seconds, but the value is totally client dependent. This relay will not forward frames until client frames have 'secs' field set to atleast the value iphelperForwDelay.
I32 iphelperMaxHops	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9	Integer32	read-write	This sets the BOOTP/DHCP relay's maximum hops forwarding limit and is only used by the BOOTP/DHCP service. If a frame arrives with hopcount greater than or equal to iphelperMaxHops, it will be dropped.
INT iphelperForwardOption	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10	INTEGER	read-write	This is the forwarding option for the BOOTP/DHCP Relay Agent. Default value is standard (1).
INT iphelperResetAllStats	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11	INTEGER	read-write	This parameter resets all the ip helper statistics. 1 - reset all stats. Both Global and server stats. 2 - reset all global statistics. 3 - reset all server statistics. When the reset operation is done, subsystem will change the value to zero (0). Subsystem will always return zero (0).
INT iphelperBootupOption	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.12	INTEGER	read-write	This object allows the user to enable or disable the functionality of the relay to get an IP address at the time of system boot-up and assign that IP address for the ip interface of the default VLAN. When this is diabled and then enable, the object iphelperBootupPacketOption is reset to its default value. Default of this option is Disable (2).
INT iphelperBootupPacketOption	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.13	INTEGER	read-write	This object is used in conjunction with iphelperBootupOption. This specify the packet format with the choices of BOOTP or DHCP to be used to get an IP address at the time of system boot-up. Default option is DHCP
INT iphelperAgentInformation	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14	INTEGER	read-write	This object allows user to enable or disable the functionality of inserting the relay agent information option to the DHCP option field according to RFC 3046. When is is disbled and then enabled, the iphelperAgentInformationPolicy will be reset to its default value.
INT iphelperAgentInformationPolicy	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15	INTEGER	read-write	This object allows the user to select the policy of either drop, keep or replace the relay agent information option if this option is already present in the DHCP packet.
INT iphelperPXESupport	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16	INTEGER	read-write	When enabled the relay agent will replace the source IP address of the packet with the gateway IP address from the DHCP packet. The default value is disabled.
INT iphelperDhcpOption82FormatType	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.17	INTEGER	read-write	DHCP option-82 defines the type of information carried in circuit id and remote id sub option fields. If the type selected is string the actual value of the string can be found in iphelperDhcpOption82StringValue. Format type ASCII will insert the configured fields in ASCII format.
STR iphelperDhcpOption82StringValue	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.18	SnmpAdminString	read-write	The value of the string that will be used in the circuit id and remote id sub options.
IPH iphelperDhcpOption82FormatASCIIField1	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.19	IphelpereOption82ASCIIFieldType	read-write	The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
STR iphelperDhcpOption82FormatASCIIField1StringValue	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.20	SnmpAdminString	read-write	The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. If the option 82 format type is not ASCII or if this field is not used or if the string value is port specific, this field returns an ASCII string -.
IPH iphelperDhcpOption82FormatASCIIField2	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.21	IphelpereOption82ASCIIFieldType	read-write	The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
STR iphelperDhcpOption82FormatASCIIField2StringValue	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.22	SnmpAdminString	read-write	The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. If the option 82 format type is not ASCII or if this field is not used or if the string value is port specific, this field returns an ASCII string -.
IPH iphelperDhcpOption82FormatASCIIField3	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.23	IphelpereOption82ASCIIFieldType	read-write	The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
STR iphelperDhcpOption82FormatASCIIField3StringValue	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.24	SnmpAdminString	read-write	The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. If the option 82 format type is not ASCII or if this field is not used or if the string value is port specific, this field returns an ASCII string -.
IPH iphelperDhcpOption82FormatASCIIField4	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.25	IphelpereOption82ASCIIFieldType	read-write	The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
STR iphelperDhcpOption82FormatASCIIField4StringValue	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.26	SnmpAdminString	read-write	The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. If the option 82 format type is not ASCII or if this field is not used or if the string value is port specific, this field returns an ASCII string -.
IPH iphelperDhcpOption82FormatASCIIField5	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.27	IphelpereOption82ASCIIFieldType	read-write	The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
STR iphelperDhcpOption82FormatASCIIField5StringValue	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.28	SnmpAdminString	read-write	The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. If the option 82 format type is not ASCII or if this field is not used or if the string value is port specific, this field returns an ASCII string -.
STR iphelperDhcpOption82FormatASCIIDelimiter	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.29	SnmpAdminString	read-write	The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This value is applicable only, if the option 82 format type is ASCII
INT iphelperResetAllOpt82ErrStats	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.30	INTEGER	read-write	This parameter resets all the ip helper Option 82 error statistics. When the reset operation is done, subsystem will change the value to zero (0). Subsystem will always return zero (0).
iphelperOption82ErrStatsTable	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31		not-accessible	A list of Option 82 related error statistic count per port and per vlan.
iphelperOption82ErrStatsEntry	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1		not-accessible	An entry in the ip helper Option 82 error statistics table
NUM iphelperOpt82ifIndex	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.1	InterfaceIndex	not-accessible	The interface where the DHCP packet ingress the switch that caused the Agent Info Violation or the Invalid Gateway IP Address error.
U32 iphelperOpt82vlan	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.2	Unsigned32	not-accessible	The vlan where the DHCP packet ingress the switch that caused the Agent Info Violation or the Invalid Gateway IP Address error.
C32 iphelperOpt82agentInfoViolationCnt	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.3	Counter32	read-only	The number of Agent Info Violation seen on this interface and vlan.
C32 iphelperOpt82invalidGatewayIPAddrCnt	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.4	Counter32	read-only	The number of Invalid Gateway IP Address seen on this interface and vlan.
INT iphelperOpt82resetErrStats	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.5	INTEGER	read-write	This parameter resets the ip helper Option 82 error statistics on this interface and vlan. When the reset operation is done, subsystem will change the value to zero (0). Subsystem will always return zero (0).
genericUdpServiceMIB	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2
genericUdpServiceTable	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1		not-accessible	This table defines the Generic UDP Relay Service.
genericUdpServiceEntry	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1		not-accessible	An entry in Generic UDP Relay table
U32 genericUdpServiceUdpPort	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.1	Unsigned32	not-accessible	UDP port for the service.
STR genericUdpServiceDescription	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.2	SnmpAdminString	read-create	The name and/or description of the service. If null string is passed the default name will be used.
C32 genericUdpServiceStatRxFromClient	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.3	Counter32	read-only	This keeps track of the number of packets received from the client with UDP destination port matching genericUdpServiceUdpPort.
ROW genericUdpServiceRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.4	RowStatus	read-create	Row Status for creating/deleting
genericUdpServiceDstTable	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2		not-accessible	This table defines the destination VLAN for the Generic UDP Relay Service. UDP packet with destination port genericUdpServiceUdpPort are forwarded to VLAN defined in genericUdpServiceDstVlan.
genericUdpServiceDstEntry	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1		not-accessible	An entry in Generic UDP Relay table
U32 genericUdpServicePort	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.1	Unsigned32	not-accessible	UDP port for the service.
U32 genericUdpServiceDstVlan	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.2	Unsigned32	not-accessible	Destination VLAN that the UPD port is to be forwarded to.
C32 genericUdpServiceStatTxToVlan	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.3	Counter32	read-only	This keeps track of the number of packets transmitted to the destination VLAN with UDP destination port matching genericUdpServicePort.
ROW genericUdpServiceDstTblRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.4	RowStatus	read-create	Row Status for creating/deleting the Generic Service Destination Table
INT genericUdpServiceStatReset	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.3	INTEGER	read-write	This parameter resets all the Generic UDP Relay related statistics. Subsystem always returns zero (0).
alaDhcpClientTrapsObj	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.3
IP alaDhcpClientAddress	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.3.1	IpAddress	accessible-for-notify	This object specifies the current IP address of the DHCP client.
IP alaDhcpClientNewAddress	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.3.2	IpAddress	accessible-for-notify	This object specifies the new IP address assigned for the DHCP client.
alcatelIND1UDPRelayMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2			Branch For UDP Relay Subsystem Conformance Information.
alcatelIND1UDPRelayMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1			Branch For UDP Relay Subsystem Units Of Conformance.
iphelperGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.1			Collection of objects for the management of parameters of UDP Relay.
iphelperStatGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.2			Collection of objects for management of statistics for DHCP Relay Agent.
iphelperMiscGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.3			Other independent objects of UDP Relay.
genericUdpServiceGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.4			Objects for Generic UDP Service table
genericUdpServiceDstGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.5			Objects for Generic UDP Service Destination table
genericUdpServiceMiscGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.6			Objects for Generic UDP Service Misc Group.
alaDhcpClientTrapsGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.7			Collection of traps for management of DHCP Client
alaDhcpClientTrapsObjectGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.8			Collection of trap objects for management of DHCP Client
iphelperOpt82ErrorStatGroup	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.9			Collection of objects for Option 82 error statistics.
alcatelIND1UDPRelayMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.2			Branch For UDP Relay Subsystem Compliance Statements.
alcatelIND1UDPRelayMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.2.1			Compliance statement for UDP Relay

RFC description

UDP relay forwarding of BOOTP/DHCP requests across VLANs on Alcatel Birds of Prey platforms.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-UDP-RELAY-MIB