ALCATEL-IND1-TIMETRA-QOS-MIB

All MIBs › ALCATEL-IND1-TIMETRA-QOS-MIB

Organization: Alcatel

Last Updated: 2008-01-01

Category: Quality of Service, Vendor: Alcatel-Lucent

Description: Alcatel 7750 SR service router QoS MIB for managing ingress/egress QoS policies, queues, and schedulers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-TIMETRA-QOS-MIB?

ALCATEL-IND1-TIMETRA-QOS-MIB is Alcatel-Lucent's proprietary QoS MIB for the Timetra-derived 7x50 SR (7750 Service Router) family, used to provision Quality of Service policies such as DSCP name mappings and forwarding-class definitions. It exposes configuration-style data rather than live traffic counters: named policy tables, row status, and storage type for each QoS object. Its monitoring value is largely about software/configuration state - confirming whether QoS policy entries are active, whether they persist across a reboot (storage type), and when they were last changed - which helps an operator audit and troubleshoot QoS policy drift rather than hardware faults. ALCATEL-IND1-TIMETRA-QOS-MIB SNMP monitoring is therefore oriented toward configuration auditing rather than real-time traffic statistics. It belongs to the larger Timetra/TIMETRA-* proprietary MIB family and follows standard SNMPv2-SMI conventions but is not derived from any IETF QoS MIB. It is deployed on carrier and service-provider edge routers doing DiffServ-style QoS marking and queuing for IP/MPLS services.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-TIMETRA-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia 7750 SR-1x-48D (2024) — FP5-silicon service router, direct successor to the Alcatel-Lucent 7750 SR
Nokia 7750 SR-a — compact service router variant of the same portfolio

Monitoring Examples

tDSCPNameTable/tDSCPNameEntry maps a DSCP codepoint (tDSCPNameDscpValue) to a named policy object, and tDSCPNameLastChanged lets an admin see when that mapping was last edited, useful for auditing unexpected QoS marking changes. tFCNameTable/tFCNameEntry defines forwarding-class names referenced by queuing policies, with tFCRowStatus and tFCStorageType showing whether each forwarding class is active and whether it will survive a reboot.

What Can Be Monitored

DSCP-to-policy-name mappings
forwarding class definitions
QoS policy entry row status
QoS entry storage type (volatile vs. persistent)
last-changed timestamp for QoS config

Imported Objects

From ALCATEL-IND1-TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From ALCATEL-IND1-TIMETRA-TC-MIB

Dot1PPriority
IpAddressPrefixLength
ServiceAccessPoint
TCIRRate
TDSCPName
TDSCPNameOrEmpty
TDSCPValue
TEgressQueueId
TFCName
TFCNameOrEmpty
TFrameType
TIngressQueueId
TIpProtocol
TItemDescription
TLspExpValue
TNamedItem
TNamedItemOrEmpty
TPIRRate
TPIRRateOrZero
TPolicyID
TPortSchedulerCIR
TPortSchedulerPIR
TQueueId
TSapEgressPolicyID
TSapIngressPolicyID
TTcpUdpPort
TTcpUdpPortOperator
TWeight
TmnxEnabledDisabled

From ATM-TC-MIB

AtmServiceCategory
AtmTrafficDescrParamIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using tAtmTdpsCurrentlyConfigured OID:

Select a Nokia (Alcatel-Lucent) 7750 SR-series service router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tAtmTdpsCurrentlyConfigured into the Find box to locate it in the OID tree, then select it and click OK. It reports the current number of ATM Traffic Descriptor Profiles configured on this system. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate a profile was added or removed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 tAtmTdpCdvt	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12	Unsigned32	read-create	tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250
INT tAtmTdpCLPTagging	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14	INTEGER	read-create	tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one.
TIT tAtmTdpDescription	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8	TItemDescription	read-create	The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor.
TAT tAtmTdpDescrType	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11	TAtmTdpDescrType	read-create	tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr
tAtmTdpEntry	1.3.6.1.4.1.6527.3.1.2.16.21.1.1		not-accessible	This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero.
ATM tAtmTdpIndex	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1	AtmTrafficDescrParamIndex	not-accessible	This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext.
I32 tAtmTdpIndexNext	1.3.6.1.4.1.6527.3.1.2.16.21.2	Integer32	read-only	This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
TIM tAtmTdpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9	TimeStamp	read-only	tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table.
U32 tAtmTdpMbs	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4	Unsigned32	read-create	tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32
U32 tAtmTdpMir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5	Unsigned32	read-create	tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir.
tAtmTdpObjects	1.3.6.1.4.1.6527.3.1.2.16.21
U32 tAtmTdpPir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3	Unsigned32	read-create	tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0
INT tAtmTdpPolicing	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13	INTEGER	read-create	tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR
ROW tAtmTdpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10	RowStatus	read-create	tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported
I32 tAtmTdpsCurrentlyConfiguredEx	1.3.6.1.4.1.6527.3.1.2.16.21.4	Integer32	read-only	This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system.
ATM tAtmTdpServCat	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7	AtmServiceCategory	read-create	tAtmTdpServCat determines the ATM service category.
INT tAtmTdpShaping	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6	INTEGER	read-create	tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.
U32 tAtmTdpSir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2	Unsigned32	read-create	tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir.
I32 tAtmTdpsMaxSupported	1.3.6.1.4.1.6527.3.1.2.16.21.3	Integer32	read-only	This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system.
tAtmTdpTable	1.3.6.1.4.1.6527.3.1.2.16.21.1		not-accessible	This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
TIM tAtmTdpTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.62	TimeStamp	read-only	tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table.
TDS tDSCPName	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1	TDSCPName	not-accessible	The name assigned to the DSCP Value.
TDS tDSCPNameDscpValue	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4	TDSCPValue	read-create	The DSCP Value.
tDSCPNameEntry	1.3.6.1.4.1.6527.3.1.2.16.1.1.1		not-accessible	Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.
TIM tDSCPNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tDSCPNameTable.
ROW tDSCPNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2	RowStatus	read-create	Row Status of the entry.
STO tDSCPNameStorageType	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3	StorageType	read-create	The storage type of this row in the table.
tDSCPNameTable	1.3.6.1.4.1.6527.3.1.2.16.1.1		not-accessible	A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
TIM tDSCPNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.5	TimeStamp	read-only	The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table.
tDSCPObjects	1.3.6.1.4.1.6527.3.1.2.16.1
TFC tFCName	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1	TFCName	not-accessible	Forwarding class name.
tFCNameEntry	1.3.6.1.4.1.6527.3.1.2.16.2.1.1		not-accessible	Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.
TIM tFCNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tFCNameTable.
tFCNameTable	1.3.6.1.4.1.6527.3.1.2.16.2.1		not-accessible	A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
TIM tFCNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.10	TimeStamp	read-only	The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table.
tFCObjects	1.3.6.1.4.1.6527.3.1.2.16.2
ROW tFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2	RowStatus	read-create	Row Status of the entry.
STO tFCStorageType	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3	StorageType	read-create	The storage type of this row in the table.
I32 tFCValue	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4	Integer32	read-create	FC Value.
timetraQosMIBModule	1.3.6.1.4.1.6527.1.1.3.16			This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel 7x50 systems. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxQos7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.4			The compliance statement for management of QOS features on Alcatel 7450 ESS series systems release R4.0.
tmnxQos7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.6			The compliance statement for management of QOS features on Alcatel 7450 ESS series systems release R5.0.
tmnxQos7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.8			The compliance statement for management of QOS features on Alcatel 7450 ESS series systems release R6.0.
tmnxQos7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.5			The compliance statement for management of QOS features on Alcatel 7750 SR series systems release R4.0.
tmnxQos7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.7			The compliance statement for management of QOS features on Alcatel 7750 SR series systems release R5.0.
tmnxQos7750V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.9			The compliance statement for management of QOS features on Alcatel 7750 SR series systems release R6.0.
tmnxQosAtmTdpV3v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.15			The group of objects for ATM Traffic Descriptor Profiles on Alcatel 7x50 SR series systems release 3.0.
tmnxQosAtmTdpV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.24			The group of objects for ATM Traffic Descriptor Profiles on Alcatel 7x50 SR series systems release 5.0.
tmnxQosCompliances	1.3.6.1.4.1.6527.3.1.1.16.1
tmnxQosConformance	1.3.6.1.4.1.6527.3.1.1.16
tmnxQosDSCPGroup	1.3.6.1.4.1.6527.3.1.1.16.2.2			The group of objects supporting management of Differential Services Code Points on Alcatel 7x50 SR series systems.
tmnxQosFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.3			The group of objects supporting management of Forwarding Classes on Alcatel 7x50 SR series systems.
tmnxQosFrameBasedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.28			The group of objects supporting management of frame-based queue accounting on Alcatel 7x50 SR series systems release 6.0.
tmnxQosGlobalGroup	1.3.6.1.4.1.6527.3.1.1.16.2.1			The group of objects supporting general management of QOS features on Alcatel 7x50 SR series systems.
tmnxQosGroups	1.3.6.1.4.1.6527.3.1.1.16.2
tmnxQosNamedPoolPolicyV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.30			The group of objects for the named pool policy on Alcatel 7x50 SR series systems.
tmnxQosNetworkR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.13			The group of objects supporting management of Network QoS policies on Alcatel 7x50 SR series systems.
tmnxQosNetworkV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.22			The group of objects supporting management of Network QoS policies on Alcatel 7x50 SR series systems.
tmnxQosNetworkV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.27			The group of objects supporting management of Network QoS policies on Alcatel 7x50 SR series systems.
tmnxQosObsoletedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.29			The group of obsolete objects for the QoS on Alcatel 7x50 SR series systems.
tmnxQosQueueV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.18			The group of objects supporting management of QoS queue policies on Alcatel 7x50 SR series systems release 4.0.
tmnxQosSapEgressR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.12			The group of objects supporting management of SAP egress QoS policies on Alcatel 7x50 SR series systems.
tmnxQosSapEgressV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.21			The group of objects supporting management of SAP egress QoS policies on Alcatel 7x50 SR series systems.
tmnxQosSapEgressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.26			The group of objects supporting management of SAP egress QoS policies on Alcatel 7x50 SR series systems.
tmnxQosSapIngressV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.19			The group of objects supporting management of SAP ingress QoS policies on Alcatel 7x50 SR series systems release 4.0.
tmnxQosSapIngressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.25			The group of objects supporting management of SAP ingress QoS policies on Alcatel 7x50 SR series systems release 6.0.
tmnxQosSapIpv6FilterR4r0Group	1.3.6.1.4.1.6527.3.1.1.16.2.16			The group of objects for Qos Policies related to IPv6 on Alcatel 7x50 SR series systems release 4.0.
tmnxQosSchedulerGroup	1.3.6.1.4.1.6527.3.1.1.16.2.8			The group of objects supporting management of Scheduler policies on Alcatel 7x50 SR series systems.
tmnxQosSchedulerV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.20			The group of objects supporting management of Scheduler policies on Alcatel 7x50 SR series systems.
tmnxQosSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.7			The group of objects supporting management of Slope policies on Alcatel 7x50 SR series systems.
TIT tNamedPoolPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4	TItemDescription	read-create	The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy.
tNamedPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.1.1		not-accessible	This list contains Named buffer pools policy related information.
TIM tNamedPoolPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3	TimeStamp	read-only	The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified.
TNA tNamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1	TNamedItem	not-accessible	The value of tNamedPoolPolicyName indicates the name of Named pool policy.
U32 tNamedPoolPolicyQ1DefaultWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5	Unsigned32	read-create	The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools.
U32 tNamedPoolPolicyQ1MdaWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6	Unsigned32	read-create	The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools.
U32 tNamedPoolPolicyQ1PortWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7	Unsigned32	read-create	The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools.
ROW tNamedPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2	RowStatus	read-create	The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies.
tNamedPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.1		not-accessible	This table contains information on Named buffer pools policy.
TIM tNamedPoolPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.73	TimeStamp	read-only	The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
T/F tNetworkEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10	TruthValue	read-write	The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.
DOT tNetworkEgressFCDot1pInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6	Dot1PPriority	read-write	the Dot1p to use for in-profile traffic.
DOT tNetworkEgressFCDot1pOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7	Dot1PPriority	read-write	the Dot1p to use for out-of-profile traffic.
TDS tNetworkEgressFCDSCPInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2	TDSCPNameOrEmpty	read-write	the DSCP to use for in-profile traffic.
TDS tNetworkEgressFCDSCPOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3	TDSCPNameOrEmpty	read-write	the DSCP to use for out-of-profile traffic.
tNetworkEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.7.1		not-accessible	Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TDE tNetworkEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9	TDEValue	read-write	The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.
TIM tNetworkEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8	TimeStamp	read-only	timestamp of last change to this row in tNetworkEgressFCTable.
TLS tNetworkEgressFCLspExpInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4	TLspExpValue	read-write	the lsp-exp value to use for in-profile traffic.
TLS tNetworkEgressFCLspExpOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5	TLspExpValue	read-write	the lsp-exp value to use for out-of-profile traffic.
TFC tNetworkEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1	TFCName	not-accessible	the name of the forwarding class (FC).
tNetworkEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.7		not-accessible	Information about all network policies' egress FC traffic disposition.
TIM tNetworkEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.43	TimeStamp	read-only	tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table.
tNetworkIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.5.3.1		not-accessible	Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3	TFCNameOrEmpty	read-create
TIM tNetworkIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDot1pTable.
TDE tNetworkIngressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4	TDEProfile	read-create	there is no DEFVAL for this object. It must be deliberately set before activating the row.
ROW tNetworkIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2	RowStatus	read-create
tNetworkIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.5.3		not-accessible
TIM tNetworkIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.44	TimeStamp	read-only	tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table.
DOT tNetworkIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1	Dot1PPriority	not-accessible
TDS tNetworkIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1	TDSCPName	not-accessible
tNetworkIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.2.1		not-accessible	Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3	TFCNameOrEmpty	read-create
TIM tNetworkIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDSCPTable.
TPR tNetworkIngressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
ROW tNetworkIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2	RowStatus	read-create
tNetworkIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.2		not-accessible
TIM tNetworkIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.41	TimeStamp	read-only	tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table.
TLS tNetworkIngressLSPEXP	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1	TLspExpValue	not-accessible
tNetworkIngressLSPEXPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.4.1		not-accessible	Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressLSPEXPFC	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3	TFCNameOrEmpty	read-create
TIM tNetworkIngressLSPEXPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressLSPEXPTable.
TPR tNetworkIngressLSPEXPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
ROW tNetworkIngressLSPEXPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2	RowStatus	read-create
tNetworkIngressLSPEXPTable	1.3.6.1.4.1.6527.3.1.2.16.5.4		not-accessible
TIM tNetworkIngressLSPEXPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.42	TimeStamp	read-only	tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table.
tNetworkObjects	1.3.6.1.4.1.6527.3.1.2.16.5
TIT tNetworkPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6	TItemDescription	read-create	tNetworkPolicyDescription holds the description for this policy.
T/F tNetworkPolicyEgressRemark	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9	TruthValue	read-create	The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.
tNetworkPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.5.1.1		not-accessible	Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.
TNE tNetworkPolicyIndex	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1	TNetworkPolicyID	not-accessible
TFC tNetworkPolicyIngressDefaultActionFC	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7	TFCName	read-create	tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.
TPR tNetworkPolicyIngressDefaultActionProfile	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8	TProfile	read-create	tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.
T/F tNetworkPolicyIngressLerUseDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11	TruthValue	read-create	The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.
TIM tNetworkPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10	TimeStamp	read-only	Timestamp of last change to this row in tNetworkPolicyTable.
ROW tNetworkPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2	RowStatus	read-create
TIT tNetworkPolicyScope	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5	TItemScope	read-create
tNetworkPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.5.1		not-accessible
TIM tNetworkPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.40	TimeStamp	read-only	tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table.
TQU tNetworkQueue	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1	TQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
TBU tNetworkQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
TRA tNetworkQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11	TRatePercent	read-create	The percentage of max rate allowed.
TAD tNetworkQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23	TAdaptationRule	read-create	The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TLE tNetworkQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tNetworkQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
tNetworkQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.2.1		not-accessible
INT tNetworkQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10	INTEGER	read-create	tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TQU tNetworkQueueFC	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3	TQueueId	read-create	The specific queue to be used for packets in this forwarding class.
tNetworkQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.6.3.1		not-accessible
TIM tNetworkQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7	TimeStamp	read-only	timestamp of last change to this row in tNetworkQueueFCTable.
TQU tNetworkQueueFCMCast	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4	TQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.
TFC tNetworkQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1	TFCName	not-accessible	Forwarding class name.
ROW tNetworkQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2	RowStatus	read-create	Row Status for this queue.
tNetworkQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.6.3		not-accessible
TIM tNetworkQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.52	TimeStamp	read-only	tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table.
TBU tNetworkQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tNetworkQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16	TimeStamp	read-only	The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.
TLE tNetworkQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TBU tNetworkQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
T/F tNetworkQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9	TruthValue	read-create	This object specifies if this is a multicast queue or not.
tNetworkQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.6
TNA tNetworkQueueParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TPI tNetworkQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12	TPIRRatePercent	read-create	The percentage of max rate allowed.
TAD tNetworkQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24	TAdaptationRule	read-create	The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TNA tNetworkQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1	TNamedItem	not-accessible
TIT tNetworkQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3	TItemDescription	read-create
tNetworkQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.6.1.1		not-accessible
TIM tNetworkQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8	TimeStamp	read-only
ROW tNetworkQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2	RowStatus	read-create
tNetworkQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.6.1		not-accessible
TIM tNetworkQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.50	TimeStamp	read-only	tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table.
TNA tNetworkQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3	TNamedItemOrEmpty	read-create	The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.
U32 tNetworkQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22	Unsigned32	read-create	The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
TLE tNetworkQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20	TLevelOrDefault	read-create	The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tNetworkQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21	TWeight	read-create	The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tNetworkQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18	TLevel	read-create	The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tNetworkQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19	TWeight	read-create	The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
ROW tNetworkQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
tNetworkQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.2		not-accessible
TIM tNetworkQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.51	TimeStamp	read-only	tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table.
T/F tNetworkQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17	TruthValue	read-create	The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.
TWE tNetworkQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
tPoolObjects	1.3.6.1.4.1.6527.3.1.2.16.22
TIT tPortSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3	TItemDescription	read-create	The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler.
tPortSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.3.1		not-accessible	Each row represents a particular port scheduler. Entries are created and deleted by the user.
TIM tPortSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4	TimeStamp	read-only	The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TPO tPortSchedulerPlcyLvl1CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1.
TPO tPortSchedulerPlcyLvl1PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1.
TPO tPortSchedulerPlcyLvl2CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2.
TPO tPortSchedulerPlcyLvl2PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2.
TPO tPortSchedulerPlcyLvl3CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3.
TPO tPortSchedulerPlcyLvl3PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3.
TPO tPortSchedulerPlcyLvl4CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4.
TPO tPortSchedulerPlcyLvl4PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4.
TPO tPortSchedulerPlcyLvl5CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5.
TPO tPortSchedulerPlcyLvl5PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5.
TPO tPortSchedulerPlcyLvl6CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6.
TPO tPortSchedulerPlcyLvl6PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6.
TPO tPortSchedulerPlcyLvl7CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7.
TPO tPortSchedulerPlcyLvl7PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7.
TPO tPortSchedulerPlcyLvl8CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8.
TPO tPortSchedulerPlcyLvl8PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8.
TPO tPortSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5	TPortSchedulerPIR	read-create	The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler.
TNA tPortSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1	TNamedItem	not-accessible	The value of tPortSchedulerPlcyName specifies the name of the port scheduler.
TLE tPortSchedulerPlcyOrphanCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24	TLevelOrDefault	read-create	The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir.
TWE tPortSchedulerPlcyOrphanCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25	TWeight	read-create	The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir.
TLE tPortSchedulerPlcyOrphanLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22	TLevel	read-create	The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir.
TWE tPortSchedulerPlcyOrphanWeight	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23	TWeight	read-create	The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir.
ROW tPortSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2	RowStatus	read-create	The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies.
tPortSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.3		not-accessible	The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
U32 tQ1NamedPoolAccessAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7	Unsigned32	read-create	The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools.
TIT tQ1NamedPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5	TItemDescription	read-create	The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool.
tQ1NamedPoolEntry	1.3.6.1.4.1.6527.3.1.2.16.22.2.1		not-accessible	This list contains Q1 pools policy related information.
TIM tQ1NamedPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4	TimeStamp	read-only	The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified.
TNA tQ1NamedPoolName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2	TNamedItem	not-accessible	The value of tQ1NamedPoolName indicates the name of the existing pool within the policy.
U32 tQ1NamedPoolNetworkAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6	Unsigned32	read-create	The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools.
TNA tQ1NamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1	TNamedItem	not-accessible	The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy.
I32 tQ1NamedPoolReservedCbs	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9	Integer32	read-create	The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
ROW tQ1NamedPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3	RowStatus	read-create	The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools.
TNA tQ1NamedPoolSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8	TNamedItemOrEmpty	read-create	The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool.
tQ1NamedPoolTable	1.3.6.1.4.1.6527.3.1.2.16.22.2		not-accessible	This table contains information on Q1 pools policy.
TIM tQ1NamedPoolTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.74	TimeStamp	read-only	The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQosDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.1	TimeStamp	read-only	The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain.
tQosNotifications	1.3.6.1.4.1.6527.3.1.3.16.0
tQosNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.16
tQosObjects	1.3.6.1.4.1.6527.3.1.2.16
tQosObsoleteObjectsGroup	1.3.6.1.4.1.6527.3.1.1.16.2.10			The group of obsolete objects in the ALCATEL-IND1-TIMETRA-QOS-MIB.
tQosTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.16.20
TIT tSapEgressDescription	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4	TItemDescription	read-create	user-supplied description of this sap-egress policy.
tSapEgressEntry	1.3.6.1.4.1.6527.3.1.2.16.4.1.1		not-accessible	Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.
T/F tSapEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11	TruthValue	read-create	The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.
DOT tSapEgressFCDot1PInProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8	Dot1PPriority	read-create	The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.
DOT tSapEgressFCDot1POutProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9	Dot1PPriority	read-create	The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.
DOT tSapEgressFCDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4	Dot1PPriority	read-create	The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.
tSapEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.4.3.1		not-accessible	Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TDE tSapEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10	TDEValue	read-create	The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.
TNA tSapEgressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12	TNamedItemOrEmpty	read-create	The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TPR tSapEgressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14	TPrecValueOrNone	read-create	The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TIM tSapEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressFCTable.
TFC tSapEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1	TFCName	not-accessible	forwarding class name.
TNA tSapEgressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13	TNamedItemOrEmpty	read-create	The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TPR tSapEgressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15	TPrecValueOrNone	read-create	The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TEG tSapEgressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3	TEgressQueueId	read-create	The queue to use for packets in this forwarding class. No FC can map to the same queue being used by 'premium' class. You must specify a valid queue-id before setting the row status to active.
ROW tSapEgressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2	RowStatus	read-create	Row Status for this queue.
tSapEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.4.3		not-accessible
TIM tSapEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.32	TimeStamp	read-only	tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table.
TSA tSapEgressIndex	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1	TSapEgressPolicyID	not-accessible	the sap-egress policy ID is used as index for the table.
TIM tSapEgressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressTable.
tSapEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.4
TCI tSapEgressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15	TCIRRate	read-create	The administrative CIR specified by the user.
TPI tSapEgressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14	TPIRRate	read-create	The administrative PIR specified by the user.
TBU tSapEgressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TAD tSapEgressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TLE tSapEgressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tSapEgressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
tSapEgressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.2.1		not-accessible	Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
INT tSapEgressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8	INTEGER	read-create	tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tSapEgressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TEG tSapEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1	TEgressQueueId	not-accessible	the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.
TIM tSapEgressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18	TimeStamp	read-only	timestamp of last change to this row in tSapEgressQueueTable.
TLE tSapEgressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TBU tSapEgressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue.
TCI tSapEgressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TPI tSapEgressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16	TPIRRate	read-only	The administrative PIR specified by the user.
TNA tSapEgressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TAD tSapEgressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TNA tSapEgressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25	TNamedItemOrEmpty	read-create	The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
U32 tSapEgressQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24	Unsigned32	read-create	The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
TLE tSapEgressQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22	TLevelOrDefault	read-create	The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tSapEgressQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23	TWeight	read-create	The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tSapEgressQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20	TLevel	read-create	The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tSapEgressQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21	TWeight	read-create	The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
ROW tSapEgressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2	RowStatus	read-create	Row Status of the entry.
tSapEgressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.2		not-accessible	information about all sap-egress policies' queues.
TIM tSapEgressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.31	TimeStamp	read-only	tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table.
T/F tSapEgressQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19	TruthValue	read-create	The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.
TWE tSapEgressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
ROW tSapEgressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2	RowStatus	read-create	Row Status of this policy's entry.
TIT tSapEgressScope	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3	TItemScope	read-create	scope of the sap-egress policy.
tSapEgressTable	1.3.6.1.4.1.6527.3.1.2.16.4.1		not-accessible	information about all sap-egress policies.
TIM tSapEgressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.30	TimeStamp	read-only	tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table.
TNA tSapIngressDefaultFC	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5	TNamedItem	read-create	tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.
TPR tSapIngressDefaultFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6	TPriority	read-create	the priority to assign to traffic ingressing as the default action queue.
TIT tSapIngressDescription	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4	TItemDescription	read-create	user-provided description of the policy.
tSapIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.3.4.1		not-accessible	Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TNA tSapIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3	TNamedItemOrEmpty	read-create	tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
TIM tSapIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDot1pTable.
TPR tSapIngressDot1pPriority	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4	TPriorityOrDefault	read-create	priority to use for packets that match the dot1p value tSapIngressDot1pValue.
ROW tSapIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2	RowStatus	read-create	Row Status for this sap-ingress policy's dot1p entry.
tSapIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.3.4		not-accessible	a list of all dot1p entries for all sap-ingress policies.
TIM tSapIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.23	TimeStamp	read-only	tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table.
DOT tSapIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1	Dot1PPriority	not-accessible	dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
TDS tSapIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1	TDSCPName	not-accessible
tSapIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.3.3.1		not-accessible	Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).
TNA tSapIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3	TNamedItemOrEmpty	read-create	tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.
TIM tSapIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDSCPTable.
TPR tSapIngressDSCPPriority	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4	TPriorityOrDefault	read-create
ROW tSapIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2	RowStatus	read-create	This object allows creation/deletion of rows in this table.
tSapIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.3.3		not-accessible	a list of all DSCP entries for all sap-ingress policies.
TIM tSapIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.22	TimeStamp	read-only	tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table.
tSapIngressEntry	1.3.6.1.4.1.6527.3.1.2.16.3.1.1		not-accessible	Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TIN tSapIngressFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5	TIngressQueueId	read-create	The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues should be used.
T/F tSapIngressFCDE1OutOfProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18	TruthValue	read-create	The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.
tSapIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.3.7.1		not-accessible	Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TNA tSapIngressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9	TNamedItemOrEmpty	read-create	tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.
TPR tSapIngressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10	TPrecValueOrNone	read-create	tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.
TRE tSapIngressFCInProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8	TRemarkType	read-create	tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TIM tSapIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7	TimeStamp	read-only	tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.
TIN tSapIngressFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4	TIngressQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues should be used.
TNA tSapIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1	TNamedItem	not-accessible	tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.
TNA tSapIngressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12	TNamedItemOrEmpty	read-create	tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.
TPR tSapIngressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13	TPrecValueOrNone	read-create	tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.
TRE tSapIngressFCOutProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11	TRemarkType	read-create	tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TPR tSapIngressFCProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14	TProfileOrNone	read-create	tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.
TIN tSapIngressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3	TIngressQueueId	read-create	The specific queue to be used for packets in this forwarding class. A value of zero implies that the default queues should be used.
ROW tSapIngressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2	RowStatus	read-create	Row Status for this queue.
tSapIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.3.7		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
TIM tSapIngressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.26	TimeStamp	read-only	tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table.
TIN tSapIngressFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6	TIngressQueueId	read-create	The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues should be used.
TSA tSapIngressIndex	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1	TSapIngressPolicyID	not-accessible	the policy ID is the index to this table.
TNA tSapIngressIPCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4	TNamedItemOrEmpty	read-create	tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressIPCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5	TPriorityOrDefault	read-create	priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
TIT tSapIngressIPCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3	TItemDescription	read-create	description of this IP criteria entry.
IP tSapIngressIPCriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8	IpAddress	read-create	IP address to match with destination-IP of the packet.
ADR tSapIngressIPCriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9	IpAddressPrefixLength	read-create	the prefix is the number of bits of the destination IP address to match.
TTC tSapIngressIPCriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPCriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TTC tSapIngressIPCriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TDS tSapIngressIPCriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17	TDSCPNameOrEmpty	read-create	DSCP value to match in the packet
tSapIngressIPCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.5.1		not-accessible	Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TIT tSapIngressIPCriteriaFragment	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19	TItemMatch	read-create	matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).
TEN tSapIngressIPCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1	TEntryId	not-accessible	unique identifier separates this entry from others in this policy.
TIM tSapIngressIPCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20	TimeStamp	read-only	timestamp of last change to this row in tSapIngressIPCriteriaTable.
TIP tSapIngressIPCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10	TIpProtocol	read-create	IP protocol to match. use -1 to disable matching by IP protocol.
ROW tSapIngressIPCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2	RowStatus	read-create	Row Status for the IP Criteria entry.
IP tSapIngressIPCriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6	IpAddress	read-create	IP address to match with source-IP of the packet.
ADR tSapIngressIPCriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7	IpAddressPrefixLength	read-create	the prefix is the number of bits of the source IP address to match.
TTC tSapIngressIPCriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPCriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
TTC tSapIngressIPCriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
tSapIngressIPCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.5		not-accessible	information about all sap-ingress policies' ip-criteria entries.
TIM tSapIngressIPCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.24	TimeStamp	read-only	tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table.
TNA tSapIngressIPv6CriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressIPv6CriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
TIT tSapIngressIPv6CriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3	TItemDescription	read-create	The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.
ADR tSapIngressIPv6CriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match.
TTC tSapIngressIPv6CriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used.
TTC tSapIngressIPv6CriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TTC tSapIngressIPv6CriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TDS tSapIngressIPv6CriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17	TDSCPNameOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet
tSapIngressIPv6CriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.9.1		not-accessible	Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tSapIngressIPv6CriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1	TEntryId	not-accessible	The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.
TIM tSapIngressIPv6CriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20	TimeStamp	read-only	The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.
TIP tSapIngressIPv6CriteriaNextHeader	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10	TIpProtocol	read-create	The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
ROW tSapIngressIPv6CriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2	RowStatus	read-create	The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.
ADR tSapIngressIPv6CriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match.
TTC tSapIngressIPv6CriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used.
TTC tSapIngressIPv6CriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
TTC tSapIngressIPv6CriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
tSapIngressIPv6CriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.9		not-accessible	Information about all sap-ingress policies' ipv6-criteria entries.
TIM tSapIngressIPv6CriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.66	TimeStamp	read-only	The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table.
TIM tSapIngressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8	TimeStamp	read-only	timestamp of last change to this row in tSapIngressTable.
TNA tSapIngressMacCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4	TNamedItemOrEmpty	read-create	tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressMacCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5	TPriorityOrDefault	read-create
TIT tSapIngressMacCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3	TItemDescription	read-create
DOT tSapIngressMacCriteriaDot1PMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13	Dot1PPriority	read-create
DOT tSapIngressMacCriteriaDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12	Dot1PPriority	read-create
NUM tSapIngressMacCriteriaDSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaDSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
MAC tSapIngressMacCriteriaDstMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10	MacAddress	read-create
MAC tSapIngressMacCriteriaDstMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11	MacAddress	read-create
tSapIngressMacCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.6.1		not-accessible	Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
I32 tSapIngressMacCriteriaEthernetType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
TFR tSapIngressMacCriteriaFrameType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria.
TEN tSapIngressMacCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1	TEntryId	not-accessible
TIM tSapIngressMacCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21	TimeStamp	read-only	timestamp of last change to this row in tSapIngressMacCriteriaTable.
ROW tSapIngressMacCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2	RowStatus	read-create
INT tSapIngressMacCriteriaSnapOui	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20	INTEGER	read-create	whether to match snap-oui, and what to match.
I32 tSapIngressMacCriteriaSnapPid	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
MAC tSapIngressMacCriteriaSrcMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8	MacAddress	read-create
MAC tSapIngressMacCriteriaSrcMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9	MacAddress	read-create
NUM tSapIngressMacCriteriaSSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaSSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
tSapIngressMacCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.6		not-accessible	information about all sap-ingress policies' mac-criteria entries.
TIM tSapIngressMacCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.25	TimeStamp	read-only	tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table.
TMA tSapIngressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7	TMatchCriteria	read-only	indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.
tSapIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.3
tSapIngressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.3.8.1		not-accessible	Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TNA tSapIngressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3	TNamedItemOrEmpty	read-create	tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressPrecFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4	TPriorityOrDefault	read-create	The priority to be assigned to the matching traffic.
TIM tSapIngressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressPrecTable.
ROW tSapIngressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2	RowStatus	read-create	Row Status for this mapping.
tSapIngressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.3.8		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
TIM tSapIngressPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.27	TimeStamp	read-only	tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table.
TPR tSapIngressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1	TPrecValue	not-accessible	Precedence value for which the mapping is done.
TIN tSapIngressQueue	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1	TIngressQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
TCI tSapIngressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16	TCIRRate	read-create	The administrative CIR specified by the user.
TPI tSapIngressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15	TPIRRate	read-create	The administrative PIR specified by the user.
TBU tSapIngressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TAD tSapIngressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TLE tSapIngressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tSapIngressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
tSapIngressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.2.1		not-accessible	Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.
INT tSapIngressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9	INTEGER	read-create	tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tSapIngressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tSapIngressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19	TimeStamp	read-only	timestamp of last change to this row in tSapIngressQueueTable.
TLE tSapIngressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TBU tSapIngressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue.
T/F tSapIngressQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8	TruthValue	read-create	This object specifies if this is a multicast queue or not.
TQU tSapIngressQueueMode	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21	TQueueMode	read-create	tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TCI tSapIngressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TPI tSapIngressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17	TPIRRate	read-only	The operating PIR.
TNA tSapIngressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TAD tSapIngressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
T/F tSapIngressQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20	TruthValue	read-create	tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.
TNA tSapIngressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22	TNamedItemOrEmpty	read-create	The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.
ROW tSapIngressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
tSapIngressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.2		not-accessible	information about all sap-ingress policies' queues.
TIM tSapIngressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.21	TimeStamp	read-only	tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table.
TWE tSapIngressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
ROW tSapIngressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2	RowStatus	read-create	Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable
TIT tSapIngressScope	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3	TItemScope	read-create	Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.
tSapIngressTable	1.3.6.1.4.1.6527.3.1.2.16.3.1		not-accessible
TIM tSapIngressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.20	TimeStamp	read-only	The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table.
tSchedulerObjects	1.3.6.1.4.1.6527.3.1.2.16.12
TIT tSchedulerPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3	TItemDescription	read-create	Description for the scheduler policy
tSchedulerPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.1.1		not-accessible	Information about a particular Scheduler Policy.
T/F tSchedulerPolicyFrameBasedAccnt	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5	TruthValue	read-create	The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.
TIM tSchedulerPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4	TimeStamp	read-only	timestamp of last change to this row in tSchedulerPolicyTable.
TNA tSchedulerPolicyName	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1	TNamedItem	not-accessible	Name of the scheduler policy.
ROW tSchedulerPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2	RowStatus	read-create	Row Status of the entry.
tSchedulerPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.12.1		not-accessible
TIM tSchedulerPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.60	TimeStamp	read-only	tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table.
TBU tSharedQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.13	TBurstPercent	read-create	tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.
TRA tSharedQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.11	TRatePercent	read-create	tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.
TLE tSharedQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.8	TLevelOrDefault	read-create	tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate.
TWE tSharedQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.9	TWeight	read-create	tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate.
tSharedQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.2.1		not-accessible	Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.
INT tSharedQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.10	INTEGER	read-create	tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.
TQU tSharedQueueFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.6	TQueueId	read-create	The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use.
tSharedQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.3.1		not-accessible	Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.
TIM tSharedQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.3	TimeStamp	read-only	tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.
TQU tSharedQueueFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.5	TQueueId	read-create	The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.
TFC tSharedQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.1	TFCName	not-accessible	tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.
TQU tSharedQueueFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.4	TQueueId	read-create	tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.
ROW tSharedQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.2	RowStatus	read-create	tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.
tSharedQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.3		not-accessible	Defines the Alcatel 7x50 SR series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.
TIM tSharedQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.65	TimeStamp	read-only	tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table.
TQU tSharedQueueFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.7	TQueueId	read-create	The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.
TBU tSharedQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.15	TBurstPercentOrDefault	read-create	tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue.
TQU tSharedQueueId	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.1	TQueueId	not-accessible	tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.
T/F tSharedQueueIsMultipoint	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.16	TruthValue	read-create	The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be set at row creation time.
TIM tSharedQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.3	TimeStamp	read-only	tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TLE tSharedQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.6	TLevel	read-create	tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate.
TBU tSharedQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.14	TBurstPercent	read-create	tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.
tSharedQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.7
TNA tSharedQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.5	TNamedItemOrEmpty	read-create	tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated.
TRA tSharedQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.12	TRatePercent	read-create	tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.
TNA tSharedQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.1	TNamedItem	not-accessible	tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.
TIT tSharedQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.4	TItemDescription	read-create	tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.
tSharedQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.7.1.1		not-accessible	Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.
TIM tSharedQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.3	TimeStamp	read-only	tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.
ROW tSharedQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.2	RowStatus	read-create	tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.
tSharedQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.7.1		not-accessible	Defines the Alcatel 7x50 SR series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.
TIM tSharedQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.63	TimeStamp	read-only	tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table.
TNA tSharedQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.4	TNamedItemOrEmpty	read-create	tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.
ROW tSharedQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.2	RowStatus	read-create	tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.
tSharedQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.2		not-accessible	Defines the Alcatel 7x50 SR series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.
TIM tSharedQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.64	TimeStamp	read-only	tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table.
TWE tSharedQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.7	TWeight	read-create	tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate.
TIT tSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3	TItemDescription	read-create	User-provided description of the policy.
INT tSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4	INTEGER	read-create	tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.
U32 tSlopeHiMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.
U32 tSlopeHiStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
TIM tSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13	TimeStamp	read-only	Timestamp of when this entry was last changed.
INT tSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8	INTEGER	read-create	tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.
U32 tSlopeLoMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.
U32 tSlopeLoStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
tSlopeObjects	1.3.6.1.4.1.6527.3.1.2.16.10
TNA tSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1	TNamedItem	not-accessible	tSlopePolicy maintains the name of the slope policy identifying the policy.
tSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.1.1		not-accessible	Slope Policy Entry.
tSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.1		not-accessible	Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
TIM tSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.55	TimeStamp	read-only	tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table.
ROW tSlopeRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
U32 tSlopeTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12	Unsigned32	read-create	The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.
TCI tVirtualSchedulerCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11	TCIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
TLE tVirtualSchedulerCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tVirtualSchedulerCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
TIT tVirtualSchedulerDescription	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4	TItemDescription	read-create	Description for the scheduler policy
tVirtualSchedulerEntry	1.3.6.1.4.1.6527.3.1.2.16.12.2.1		not-accessible	Information about a particular Scheduler belonging to a Scheduler Policy.
TIM tVirtualSchedulerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13	TimeStamp	read-only	The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable.
TLE tVirtualSchedulerLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TNA tVirtualSchedulerName	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2	TNamedItem	not-accessible	Name of the scheduler policy.
TNA tVirtualSchedulerParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5	TNamedItemOrEmpty	read-create	The scheduler to which this scheduler would be feeding to.
TPI tVirtualSchedulerPIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10	TPIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
TLE tVirtualSchedulerPortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17	TLevelOrDefault	read-create	The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tVirtualSchedulerPortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18	TWeight	read-create	The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tVirtualSchedulerPortLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15	TLevel	read-create	The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tVirtualSchedulerPortWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16	TWeight	read-create	The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
ROW tVirtualSchedulerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3	RowStatus	read-create	Row Status of the entry.
T/F tVirtualSchedulerSummedCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12	TruthValue	read-create	tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning.
tVirtualSchedulerTable	1.3.6.1.4.1.6527.3.1.2.16.12.2		not-accessible
TIM tVirtualSchedulerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.61	TimeStamp	read-only	tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table.
INT tVirtualSchedulerTier	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1	INTEGER	not-accessible	Tier to which this scheduler belongs to.
T/F tVirtualSchedulerUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14	TruthValue	read-create	The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed.
TWE tVirtualSchedulerWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.

RFC description

Nokia (formerly Alcatel-Lucent) TimeT MIB defining managed objects for Quality-of-Service (QoS) policy configuration, monitoring, and statistics on carrier-class routing platforms.

Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-TIMETRA-QOS-MIB