All MIBs › ALCATEL-IND1-TIMETRA-SERV-MIB
Organization: Alcatel
Last Updated: 2008-01-01
Category: MPLS and Traffic Engineering, Pseudowire, Vendor: Alcatel-Lucent
Description: Alcatel 7750 SR service router MIB covering services, used to configure VPLS, VPWS, and IES service instances.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ALCATEL-IND1-TIMETRA-SERV-MIB?
ALCATEL-IND1-TIMETRA-SERV-MIB is a proprietary MIB from Alcatel-Lucent (Timetra) for the 7x50 SR family of service routers, covering the provisioning and status of customer-facing services such as VPLS, VPWS, and IES. It exposes customer/service configuration data including a customer information table and multi-service site table used to define which services a given customer subscribes to and where those services terminate. Rather than hardware sensors, its monitoring focus is on service and software configuration state: custRowStatus and custLastMgmtChange track whether a service definition is active and when it was last modified, letting operators audit configuration drift or unexpected service changes rather than physical health. It depends on other Alcatel-Lucent Timetra MIBs for the lower-layer service objects (SDP/SAP bindings) that this services model references. It is deployed by service providers running Alcatel-Lucent 7750/7710/7450 SR platforms to manage carrier Ethernet and IP/MPLS VPN services, and network engineers typically retrieve the ALCATEL-IND1-TIMETRA-SERV-MIB MIB file directly from Alcatel-Lucent's SR OS MIB reference bundle when provisioning these services.
IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-TIMETRA-SERV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia 7750 SR-1x (2020) — FP5-silicon edge service router, current generation of the former Alcatel-Lucent 7750 SR line
- Nokia 7750 SR-s (2019) — modular chassis service router, up to 230 Tb/s FD with intelligent aggregation
Monitoring Examples
An operator would walk custInfoTable to enumerate every custInfoEntry by custId, checking custDescription, custContact, and custRowStatus to confirm a customer's service records are active and correctly documented. Cross-referencing custMultiServiceSiteTable shows which physical sites are associated with a given customer's services, useful for validating a multi-site VPN topology. An unexpected change to custLastMgmtChange without a corresponding change ticket would flag unauthorized configuration modification.
What Can Be Monitored
- customer service records
- service row/administrative status
- customer contact and description metadata
- multi-service site associations
- last management change timestamp
This MIB depends on
Related MIBs
Imported Objects
From ALCATEL-IND1-TIMETRA-FILTER-MIB
| TFilterID |
From ALCATEL-IND1-TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From ALCATEL-IND1-TIMETRA-QOS-MIB
| tSchedulerPolicyName | OBJECT-TYPE |
| tVirtualSchedulerName | OBJECT-TYPE |
From ALCATEL-IND1-TIMETRA-TC-MIB
| QTag | |
| SdpBindId | |
| ServiceAdminStatus | |
| ServiceOperStatus | |
| TCIRRate | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TPIRRate | |
| TPolicyStatementNameOrEmpty | |
| TPortSchedulerPIR | |
| TmnxActionType | |
| TmnxAncpStringOrZero | |
| TmnxCustId | |
| TmnxEnabledDisabled | |
| TmnxEncapVal | |
| TmnxManagedRouteStatus | |
| TmnxPortID | |
| TmnxServId | |
| TmnxVPNRouteDistinguisher | |
| TmnxVRtrIDOrZero |
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressPrefixLength | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowPointer | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using custNumEntries OID:
Select a Nokia (Alcatel-Lucent) 7750 SR-series service router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type custNumEntries into the Find box to locate it in the OID tree, then select it and click OK. It reports the current number of customer records configured on this device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate a customer record was added or removed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| SER custContact | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.4 | ServObjDesc | read-create | The value of the object custContact specifies the name of the primary contact person for this customer. |
| NTF custCreated | 1.3.6.1.4.1.6527.3.1.3.4.1.0.1 | The trap custCreated is sent when a new row is created in the custInfoTable. | ||
| NTF custDeleted | 1.3.6.1.4.1.6527.3.1.3.4.1.0.2 | The trap custDeleted is sent when an existing row is deleted from the custInfoTable. | ||
| SER custDescription | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.3 | ServObjDesc | read-create | The value of the object custDescription specifies optional, generic information about this customer in a displayable format. |
| TMN custEgrQosAssignmentPortId | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.2 | TmnxPortID | not-accessible | The value of custEgrQosAssignmentPortId is used as an index of the egress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler. This object refers to the TmnxPortID of these member-ports. |
| TNA custEgrQosPortIdSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.1 | TNamedItem | not-accessible | The value of custEgrQosPortIdSchedName is used as an index of the egress QoS scheduler of this customer multi service site. |
| custEgrQosPortIdSchedStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1 | not-accessible | Each row entry represents the egress statistics for a customer multi-service-site egress scheduler. Entries are created when a scheduler policy is applied to an MSS. | |
| custEgrQosPortIdSchedStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.8 | not-accessible | The custEgrQosPortIdSchedStatsTable contains egress QoS scheduler statistics for the customer multi service site. | |
| C64 custEgrQosPortSchedFwdOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.4 | Counter64 | read-only | The value of custEgrQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrQosPortSchedFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.3 | Counter64 | read-only | The value of custEgrQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| TNA custEgrQosSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1.1 | TNamedItem | not-accessible | The index of the egress QoS scheduler of this customer multi service site. |
| C64 custEgrQosSchedStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1.3 | Counter64 | read-only | The value of the object custEgrQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrQosSchedStatsForwardedPackets | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1.2 | Counter64 | read-only | The value of the object custEgrQosSchedStatsForwardedPackets indicates number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrSchedPlcyPortStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1.3 | Counter64 | read-only | The value of custEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrSchedPlcyPortStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1.2 | Counter64 | read-only | The value of custEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| TMN custEgrSchedPlcyPortStatsPort | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1.1 | TmnxPortID | not-accessible | The value of custEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler. This object refers to the TmnxPortID of these member-ports. |
| C64 custEgrSchedPlcyStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.12.1.2 | Counter64 | read-only | The value of the object custEgrSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrSchedPlcyStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.12.1.1 | Counter64 | read-only | The value of the object custEgrSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| TMN custId | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.1 | TmnxCustId | read-only | Customer identifier. This ID must be unique within a service domain. |
| custInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1 | not-accessible | Information about a specific customer. | |
| custInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.1.3 | not-accessible | A table that contains customer information. There is an entry in this table corresponding to the default customer. This entry cannot be edited or deleted, and it is used as the default customer for newly created services. | |
| TMN custIngQosAssignmentPortId | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.2 | TmnxPortID | not-accessible | The value of custIngQosAssignmentPortId is used as an index of the ingress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler. This object refers to the TmnxPortID of these member-ports. |
| TNA custIngQosPortIdSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.1 | TNamedItem | not-accessible | The value of custIngQosPortIdSchedName is used as an index of the ingress QoS scheduler of this customer multi service site. |
| custIngQosPortIdSchedStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1 | not-accessible | Each entry represents the ingress statistics about a specific customer multi service site ingress scheduler. Entries are created when a scheduler policy is applied to an MSS. | |
| custIngQosPortIdSchedStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.7 | not-accessible | The custIngQosPortIdSchedStatsTable contains ingress QoS scheduler statistics for the customer multi service site. | |
| C64 custIngQosPortSchedFwdOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.4 | Counter64 | read-only | The value of custIngQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngQosPortSchedFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.3 | Counter64 | read-only | The value of custIngQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| TNA custIngQosSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1.1 | TNamedItem | not-accessible | The index of the ingress QoS scheduler of this customer multi service site. |
| C64 custIngQosSchedStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1.3 | Counter64 | read-only | The value of the object custIngQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngQosSchedStatsForwardedPackets | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1.2 | Counter64 | read-only | The value of the object custIngQosSchedStatsForwardedPackets indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngSchedPlcyPortStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1.3 | Counter64 | read-only | The value of custIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngSchedPlcyPortStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1.2 | Counter64 | read-only | The value of custIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| TMN custIngSchedPlcyPortStatsPort | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1.1 | TmnxPortID | not-accessible | The value of custIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler. This object refers to the TmnxPortID of these member-ports. |
| C64 custIngSchedPlcyStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.11.1.2 | Counter64 | read-only | The value of the object custIngSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngSchedPlcyStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.11.1.1 | Counter64 | read-only | The value of the object custIngSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| TIM custLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.6 | TimeStamp | read-only | The value of the object custLastMgmtChange indicates the value of the object sysUpTime at the time of the most recent management-initiated change to this customer. |
| custMssEgrQosSchedInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1 | not-accessible | Egrress statistics about a specific customer multi service site egress scheduler. | |
| custMssEgrQosSchedInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.1.10 | not-accessible | A table that contains egress QoS scheduler statistics for the customer multi service site. | |
| TCI custMssEgrQosSCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.6 | TCIRRate | read-create | The value of custMssEgrQosSCIR specifies the desired CIR value for this virtual scheduler. |
| TIM custMssEgrQosSLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.3 | TimeStamp | read-only | The value of custMssEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| TNA custMssEgrQosSName | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.1 | TNamedItem | not-accessible | The value of custMssEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden. |
| TVI custMssEgrQosSOverrideFlags | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.4 | TVirtSchedAttribute | read-create | The value of custMssEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy. |
| TPI custMssEgrQosSPIR | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.5 | TPIRRate | read-create | The value of custMssEgrQosSPIR specifies the desired PIR value for this virtual scheduler. |
| ROW custMssEgrQosSRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.2 | RowStatus | read-create | The value of custMssEgrQosSRowStatus controls the creation and deletion of rows in this table. |
| T/F custMssEgrQosSSummedCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.7 | TruthValue | read-create | The value of custMssEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssEgrQosSCIR) loses its meaning. |
| custMssIngQosSchedInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1 | not-accessible | Ingress statistics about a specific customer multi service site ingress scheduler. | |
| custMssIngQosSchedInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.1.9 | not-accessible | A table that contains ingress QoS scheduler statistics for the customer multi service site. | |
| TCI custMssIngQosSCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.6 | TCIRRate | read-create | The value of custMssIngQosSCIR specifies the desired CIR value for this virtual scheduler. |
| TIM custMssIngQosSLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.3 | TimeStamp | read-only | The value of custMssIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| TNA custMssIngQosSName | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.1 | TNamedItem | not-accessible | The value of custMssIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden. |
| TVI custMssIngQosSOverrideFlags | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.4 | TVirtSchedAttribute | read-create | The value of custMssIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy. |
| TPI custMssIngQosSPIR | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.5 | TPIRRate | read-create | The value of custMssIngQosSPIR specifies the desired PIR value for this virtual scheduler. |
| ROW custMssIngQosSRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.2 | RowStatus | read-create | The value of custMssIngQosSRowStatus controls the creation and deletion of rows in this table. |
| T/F custMssIngQosSSummedCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.7 | TruthValue | read-create | The value of custMssIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssIngQosSCIR) loses its meaning. |
| custMultiServiceSiteEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1 | not-accessible | Information about a specific customer's multi-service site. | |
| custMultiServiceSiteTable | 1.3.6.1.4.1.6527.3.1.2.4.1.4 | not-accessible | ||
| custMultiSvcSiteEgrSchedPlcyPortStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1 | not-accessible | Each entry represents the egress statistics about a specific customer multi service site egress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteEgrSchedPlcyPortStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.14 | not-accessible | The custMultiSvcSiteEgrSchedPlcyPortStatsTable contains egress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteEgrSchedPlcyStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.12.1 | not-accessible | Egress statistics about a specific customer multi service site egress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteEgrSchedPlcyStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.12 | not-accessible | A table that contains egress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteEgrStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1 | not-accessible | Egress statistics about a specific customer multi service site egress scheduler. | |
| custMultiSvcSiteEgrStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.6 | not-accessible | A table that contains egress QoS scheduler statistics for the customer multi service site. | |
| custMultiSvcSiteIngSchedPlcyPortStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1 | not-accessible | Each entry represents the ingress statistics about a specific customer multi service site ingress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteIngSchedPlcyPortStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.13 | not-accessible | The custMultiSvcSiteIngSchedPlcyPortStatsTable contains ingress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteIngSchedPlcyStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.11.1 | not-accessible | Ingress statistics about a specific customer multi service site egress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteIngSchedPlcyStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.11 | not-accessible | A table that contains ingress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteIngStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1 | not-accessible | Ingress statistics about a specific customer multi service site ingress scheduler. | |
| custMultiSvcSiteIngStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.5 | not-accessible | A table that contains ingress QoS scheduler statistics for the customer multi service site. | |
| U32 custMultSvcSiteAssignment | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.5 | Unsigned32 | read-create | The value of the object custMultSvcSiteAssignment specifies the port ID, MDA, or card number, where the SAPs that are members of this Multi- Service Site are defined. |
| NTF custMultSvcSiteCreated | 1.3.6.1.4.1.6527.3.1.3.4.1.0.3 | The trap custMultSvcSiteCreated is sent when a new row is created in the custMultiServiceSiteTable. | ||
| SER custMultSvcSiteCurrentEgrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.11 | ServObjName | read-only | The value of the object custMultSvcSiteCurrentEgrSchedPlcy indicates the Egress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from the sapEgressQosSchedulerPolicy in case it is overruled by a ToD-suite policy defined on this multi-service site. |
| SER custMultSvcSiteCurrentIngrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.10 | ServObjName | read-only | The value of the object custMultSvcSiteCurrentIngrSchedPlcy indicates the Ingress QoS scheduler on this multi-service Site, or zero if none is currently active. The active policy may deviate from custMultSvcSiteIngressSchedulerPolicy in case it is overruled by a ToD-suite policy defined on this multi-service site. |
| NTF custMultSvcSiteDeleted | 1.3.6.1.4.1.6527.3.1.3.4.1.0.4 | The trap custMultSvcSiteDeleted is sent when an existing row is deleted from the custMultiServiceSiteTable. | ||
| SER custMultSvcSiteDescription | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.3 | ServObjDesc | read-create | The value of the object custMultSvcSiteDescription specifies option, generic information about this customer's Multi-Service Site. |
| TPO custMultSvcSiteEgressAggRateLimit | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.12 | TPortSchedulerPIR | read-create | The value of the object custMultSvcSiteEgressAggRateLimit specifies the maximum total rate of all egress queues for this multi-service site. The value '-1' means that there is no limit. |
| SER custMultSvcSiteEgressSchedulerPolicy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.7 | ServObjName | read-create | The value of the object custMultSvcSiteEgressSchedulerPolicy specifies the egress QoS scheduler policy assigned to this Multi-Service Site. |
| T/F custMultSvcSiteFrameBasedAccnt | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.15 | TruthValue | read-create | The value of custMultSvcSiteFrameBasedAccnt specifies whether to use frame-based accounting when evaluating custMultSvcSiteEgressAggRateLimit for the egress queues for this multi-service site. If the value is 'false', the default packet-based accounting method will be used. |
| SER custMultSvcSiteIngressSchedulerPolicy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.6 | ServObjName | read-create | The value of the object custMultSvcSiteIngressSchedulerPolicy specifies the ingress QoS scheduler policy assigned to this Multi-Service Site. |
| SER custMultSvcSiteIntendedEgrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.14 | ServObjName | read-only | The value of the object custMultSvcSiteIntendedEgrSchedPlcy indicates indicates the Egress QoS scheduler on this multi-service Site that should be applied. If it deviates from custMultSvcSiteCurrentEgrSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using tod-suites for the SAP. When the tod-suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal. |
| SER custMultSvcSiteIntendedIngrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.13 | ServObjName | read-only | The value of the object custMultSvcSiteIntendedIngrSchedPlcy indicates indicates the Ingress QoS scheduler on this multi-service Site that should be applied. If it deviates from custMultSvcSiteCurrentIngrSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using tod-suites for the SAP. When the tod-suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal. |
| TIM custMultSvcSiteLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.8 | TimeStamp | read-only | The value of the object custMultSvcSiteLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this multi-service site. |
| TNA custMultSvcSiteName | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.1 | TNamedItem | read-only | |
| ROW custMultSvcSiteRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.2 | RowStatus | read-create | The value of the object custMultSvcSiteRowStatus specifies the status of this row. |
| INT custMultSvcSiteScope | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.4 | INTEGER | read-create | The value of the object custMultSvcSiteScope specifies the scope of the ingress and egress QoS scheduler policies assigned to this Multi-Service Site. When the value is 'port' all the SAPs that are members of this Multi-Service Site must be defined on the same port. Similarly for the case of'card'. |
| TNA custMultSvcSiteTodSuite | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.9 | TNamedItemOrEmpty | read-create | The value of the object custMultSvcSiteTodSuite specifies the Time of Day (ToD) suite to be applied on this multi-service site. An empty string indicates that no ToD suite is applied on this multi-service Site. A set request will only be allowed, if the indicated suite is defined is TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable. Using a suite the values of custMultSvcSiteIngressSchedulerPolicy and custMultSvcSiteEgressSchedulerPolicy can be time based manipulated. |
| TMN custNextFreeId | 1.3.6.1.4.1.6527.3.1.2.4.1.2 | TmnxCustId | read-only | The value of the object custNextFreeId indicates the next available value for custId, the index for the custInfoTable. |
| I32 custNumEntriesEx | 1.3.6.1.4.1.6527.3.1.2.4.1.1 | Integer32 | read-only | The value of the object custNumEntries indicates the current number of customer records configured in this device. |
| SER custPhone | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.5 | ServObjDesc | read-create | The value of the object custPhone specifies the phone/pager number used to reach the primary contact person. |
| ROW custRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.2 | RowStatus | read-create | The value of the object custRowStatus specifies the status of this row. |
| custTraps | 1.3.6.1.4.1.6527.3.1.3.4.1.0 | |||
| custTrapsPrefix | 1.3.6.1.4.1.6527.3.1.3.4.1 | |||
| MAC hostConnectivityChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.29 | MacAddress | accessible-for-notify | The value of the object hostConnectivityChAddr indicates the client MAC address causing the trap. |
| IP hostConnectivityCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.28 | InetAddress | accessible-for-notify | The value of the object hostConnectivityCiAddr indicates the client INET address causing the trap. |
| IPt hostConnectivityCiAddrType | 1.3.6.1.4.1.6527.3.1.2.4.6.27 | InetAddressType | accessible-for-notify | The value of the object hostConnectivityCiAddrType indicates the client address type causing the trap. |
| iesGrpIfEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1 | not-accessible | Each row entry represents the attributes of a group interface. Entries are create/destroyed when entries in iesIfEntry with iesIfType 'group' are created/destroyed. | |
| T/F iesGrpIfOperUpWhileEmpty | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1.2 | TruthValue | read-write | The value of iesGrpIfOperUpWhileEmpty specifies the whether that operational status of the the IES group interface, as indicated by iesIfOperStatus, should have a value of 'up' even when there are no SAPs on the group interface. If the value of iesGrpIfOperUpWhileEmpty is 'true', the value of iesIfOperStatus for the IES group interface will be 'up' when there are no SAPs on the group interface. When the value of iesGrpIfOperUpWhileEmpty is 'false', the value of iesIfOperStatus will depend on the operational state of the SAPs on the group interface. The value of iesGrpIfOperUpWhileEmpty will be ignored when there are SAPs on the IES group interface. |
| NUM iesGrpIfRedInterface | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1.1 | InterfaceIndexOrZero | read-write | The value of iesGrpIfRedInterface specifies the ifIndex of the redundant interface this group interface is tied to. The interface pointed to by this object must be of type 'redundant'. |
| iesGrpIfTable | 1.3.6.1.4.1.6527.3.1.2.4.2.21 | not-accessible | The iesGrpIfTable has entry for each group interface configured on this system. | |
| SER iesIfAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.5 | ServiceAdminStatus | read-create | The value of the object iesIfAdminStatus specifies the desired state of this IES interface. |
| NTF iesIfCreated | 1.3.6.1.4.1.6527.3.1.3.4.2.0.6 | The iesIfCreated notification is generated when a new row is created in the iesIfTable. | ||
| TMN iesIfCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.9 | TmnxCustId | read-only | The value of the object iesIfCustId indicates the Customer ID of the associated IES service. |
| NTF iesIfDeleted | 1.3.6.1.4.1.6527.3.1.3.4.2.0.7 | The iesIfDeleted notification is sent when an existing row is deleted from the iesIfTable. | ||
| SER iesIfDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.4 | ServObjLongDesc | read-create | The value of the object iesIfDescription specifies generic information about this IES interface. |
| iesIfEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1 | not-accessible | Information about a specific IES interface. | |
| TMN iesIfFwdServId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.17 | TmnxServId | read-create | The value of iesIfFwdServId specifies the forwarding service ID for a subscriber interface in a retailer context. This value can only be set at row creation time along with iesIfFwdSubIf, and it is only valid when iesIfType is 'subscriber'. The iesIfFwdServId MUST correspond to a service of type 'vprn'. |
| NUM iesIfFwdSubIf | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.18 | InterfaceIndexOrZero | read-create | The value of iesIfFwdSubIf specifies the forwarding subscriber interface for a subscriber interface in a retailer context. This value can only be set at row creation time along with iesIfFwdServId, and it is only valid when iesIfType is 'subscriber'. The interface pointed to by iesIfFwdSubIf MUST be of type 'subscriber' in the the service context defined by iesIfFwdServId. |
| NUM iesIfIndex | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.1 | InterfaceIndex | read-only | The secondary index of the row in the vRtrIfTable corresponding to this IES interface. The primary index is 1; i.e. all IES interfaces are defined in the Base virtual router context. |
| TIM iesIfLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.7 | TimeStamp | read-only | The value of the object iesIfLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this IES interface. |
| TIM iesIfLastStatusChange | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.11 | TimeStamp | read-only | The value of the object iesIfLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his interface. |
| T/F iesIfLoopback | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.10 | TruthValue | read-create | When the value of iesIfLoopback is set to 'true', loopback is enabled on the IES interface represented by this row entry. When the value is 'false', loopback is disabled. |
| TNA iesIfName | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.3 | TNamedItem | read-create | The value of the object iesIfName specifies the name used to refer to this IES interface. This name must be unique within the Base virtual router context. This object must be specified when the row is created, and cannot be changed while the rowstatus is 'active'. |
| SER iesIfOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.6 | ServiceOperStatus | read-only | The value of the object iesIfOperStatus indicates the operating state of this IES interface. |
| NUM iesIfParentIf | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.13 | InterfaceIndexOrZero | read-create | The value of iesIfParentIf specifies the ifIndex of this interface's parent. This value can only be set at row creation time, and is only valid when iesIfType is 'group'. The interface pointed to by iesIfParentIf must be of type 'subscriber'. |
| ROW iesIfRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.2 | RowStatus | read-create | The value of the object iesIfRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. |
| INT iesIfShcvAction | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.15 | INTEGER | read-create | The value of iesIfShcvAction specifies the action to be taken for hosts on this interface whose host connectivity checking fails |
| U32 iesIfShcvInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.16 | Unsigned32 | read-create | The value of the object iesIfShcvInterval specifies the interval in minutes between connectivity checks. Zero means no in host-connection-verify |
| INT iesIfShcvSource | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.14 | INTEGER | read-create | The value of iesIfShcvSource specifies the source used for subscriber host connectivity checking |
| NTF iesIfStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.8 | The iesIfStatusChanged notification is generated when there is a change in the administrative or operating status of an IES interface. | ||
| iesIfTable | 1.3.6.1.4.1.6527.3.1.2.4.2.5 | not-accessible | A table that contains IES interface information. | |
| INT iesIfType | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.12 | INTEGER | read-create | The value of iesIfType specifies the type of this IES interface. This object can only be set at row creation time. 'service' - This is a normal IES interface. 'subscriber' - This is a subscriber interface, under which multiple group interfaces can be configured. 'group' - This is a group interface, belonging to a parent subscriber interface. 'redundant' - This is a redundant interface, used for dual homing. 'cem' - This is a CEM interface, used for IP/UDP encapsulated CEM IES interface. 'ipsec' - This is an IPsec interface, used for IPsec tunneling. 'ipMirror' - This is an IP interface, used for IP Mirroring. |
| VPN iesIfVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.8 | VpnId | read-only | The value of the object iesIfVpnId indicates the VPN ID of the associated IES service. |
| MAC macPinningMacAddress | 1.3.6.1.4.1.6527.3.1.2.4.6.1 | MacAddress | accessible-for-notify | The value of the object macPinningMacAddress indicates the pinned MAC address. |
| NUM macPinningPinnedRow | 1.3.6.1.4.1.6527.3.1.2.4.6.2 | RowPointer | accessible-for-notify | The value of the object macPinningPinnedRow indicates where the MAC address is currently pinned on. Its value will be the OID of the first accessible object in the row of the sapTlsInfoTable or in the sdpBindTable, depending on whether the MAC address is pinned on a SAP or a SDP Bind. |
| STR macPinningPinnedRowDescr | 1.3.6.1.4.1.6527.3.1.2.4.6.3 | DisplayString | accessible-for-notify | The value of the object macPinningPinnedRowDescr indicates where the MAC address is currently pinned on. The value will either be a SAP-id or a SDP id, presented in readable format, depending on whether the MAC is pinned to a SAP or a SDP. |
| NUM macPinningViolatingRow | 1.3.6.1.4.1.6527.3.1.2.4.6.4 | RowPointer | accessible-for-notify | The value of the object macPinningViolatingRow indicates where the MAC address relearn attempt was detected. Its value will be the OID of the first accessible object in the row of the sapTlsInfoTable or in the sdpBindTable, depending on whether the MAC address is pinned on a SAP or a SDP Bind. |
| STR macPinningViolatingRowDescr | 1.3.6.1.4.1.6527.3.1.2.4.6.5 | DisplayString | accessible-for-notify | The value of the object macPinningViolatingRowDescr indicates where the MAC address relearn attempt was detected. The value will either be a SAP-id or a SDP id, presented in readable format, depending on whether the MAC address relearn attempt was detected on a SAP or a SDP. |
| NTF newRootBridge | 1.3.6.1.4.1.6527.3.1.3.4.5.0.7 | The newRootBridge notification is generated when this bridge has been elected as the new root bridge. A new root bridge creates a new spanning tree topology and may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF newRootVcpState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.4 | The newRootVcpState notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. The new root bridge creates a new spanning tree topology and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF pipActiveProtocolChange | 1.3.6.1.4.1.6527.3.1.3.4.5.0.42 | The pipActiveProtocolChange notification is generated when the spanning tree protocol on this PIP Uplink changes from rstp to stp or vice-versa. No recovery is needed. | ||
| MAC protectedMacForNotify | 1.3.6.1.4.1.6527.3.1.2.4.6.30 | MacAddress | accessible-for-notify | The value of the object protectedMacForNotify indicates the protected MAC address that was received, causing the sapReceivedProtSrcMac notification. |
| STR staticHostDynamicMacConflict | 1.3.6.1.4.1.6527.3.1.2.4.6.32 | DisplayString | accessible-for-notify | The value of the object staticHostDynamicMacConflict indicates the reason causing the sapStaticHostDynMacConflict notification. |
| IP staticHostDynamicMacIpAddress | 1.3.6.1.4.1.6527.3.1.2.4.6.31 | IpAddress | accessible-for-notify | The value of the object staticHostDynamicMacIpAddress indicates the IP address of the static host for which the sapStaticHostDynMacConflict notification is generated. |
| SER svcAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.8 | ServiceAdminStatus | read-create | The value of the object svcAdminStatus specifies the desired state of this service. |
| svcApipeInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.7.1 | not-accessible | APIPE specific information about a service. | |
| svcApipeInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.7 | not-accessible | A table that contains APIPE service information. | |
| INT svcApipeInterworking | 1.3.6.1.4.1.6527.3.1.2.4.2.7.1.1 | INTEGER | read-write | The value of the object svcApipeInterworking specifies the interworking function that should be applied for packets that ingress/egress SAPs that are part of a APIPE service. |
| INT svcAutoBind | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.16 | INTEGER | read-create | The value of the object svcAutoBind specifies, for a VPRN service, the type of lookup to be used by the routing instance if no SDP to the destination exists. |
| svcBaseInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1 | not-accessible | Basic information about a specific service. | |
| svcBaseInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.2 | not-accessible | A table that contains basic service information. | |
| NTF svcCreated | 1.3.6.1.4.1.6527.3.1.3.4.2.0.1 | This trap is sent when a new row is created in the svcBaseInfoTable. | ||
| TMN svcCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.4 | TmnxCustId | read-create | The value of the object svcCustId specifies the ID of the customer who owns this service. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| U32 svcDefMeshVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.13 | Unsigned32 | read-create | The value of the object svcDefMeshVcId specifies, only in services that accept mesh SDP bindings, the VC ID portion of the sdpBindId index of each mesh SDP binding defined in the service. The default value of this object is equal to the service ID. |
| NTF svcDeleted | 1.3.6.1.4.1.6527.3.1.3.4.2.0.2 | This trap is sent when an existing row is deleted from the svcBaseInfoTable. | ||
| SER svcDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.6 | ServObjDesc | read-create | The value of the object svcDescription specifiers an optional, generic information about this service. |
| I32 svcDhcpClientLease | 1.3.6.1.4.1.6527.3.1.2.4.6.24 | Integer32 | accessible-for-notify | The value of the object svcDhcpClientLease indicates the lease time specified in the DHCP PDU causing the trap. |
| STR svcDhcpCoAError | 1.3.6.1.4.1.6527.3.1.2.4.6.38 | DisplayString | accessible-for-notify | The value of the object svcDhcpCoAError indicates the reason why the node failed to process a Change of Authorization (CoA) request from a Radius server. |
| svcDhcpLeaseStateActionEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.25.1 | not-accessible | Each row entry contains parameters that allow to perform an action on the corresponding lease-state. | |
| svcDhcpLeaseStateActionTable | 1.3.6.1.4.1.6527.3.1.2.4.2.25 | not-accessible | The svcDhcpLeaseStateActionTable augments the svcDhcpLeaseStateTable. The table allows the operator to perform actions on the lease state. | |
| svcDhcpLeaseStateEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1 | not-accessible | Information about a specific DHCP lease state. | |
| svcDhcpLeaseStateModifyEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1 | not-accessible | Each row entry contains parameters that allow to modify a lease-state's attributes. | |
| svcDhcpLeaseStateModifyTable | 1.3.6.1.4.1.6527.3.1.2.4.2.18 | not-accessible | The svcDhcpLeaseStateModifyTable augments the svcDhcpLeaseStateTable. The table allows the operator to modify attributes of the lease state. | |
| svcDhcpLeaseStateTable | 1.3.6.1.4.1.6527.3.1.2.4.2.16 | not-accessible | A table that contains DHCP lease states. | |
| STR svcDhcpLseStateAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.25 | DisplayString | read-only | The object svcDhcpLseStateAncpString indicates the value of the ancp-string received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginStrings. |
| STR svcDhcpLseStateAppProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.53 | DisplayString | read-only | The value of svcDhcpLseStateAppProfString indicates the application profile string applicable for this DHCP lease state. The value of svcDhcpLseStateOriginStrings indicates whether this application profile string was received from DHCP or from the Radius server. |
| IP svcDhcpLseStateBCastIpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.29 | InetAddress | read-only | The value of svcDhcpLseStateBCastIpAddr indicates the broadcast IP address received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateBCastIpAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.28 | InetAddressType | read-only | The value of svcDhcpLseStateBCastIpAddrType indicates the address type of svcDhcpLseStateBCastIpAddr. |
| MAC svcDhcpLseStateChAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.8 | MacAddress | read-only | The value of svcDhcpLseStateChAddr indicates the MAC address of the DHCP lease state. |
| IP svcDhcpLseStateCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.2 | InetAddress | not-accessible | The value of svcDhcpLseStateCiAddr indicates the IP address of the DHCP lease state. |
| U32 svcDhcpLseStateCiAddrMaskLen | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.22 | Unsigned32 | read-only | The value of svcDhcpLseStateCiAddrMaskLen indicates the prefix length of the svcDhcpLseStateCiAddr for a DHCPv6 lease. |
| IPt svcDhcpLseStateCiAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.1 | InetAddressType | not-accessible | The value of svcDhcpLseStateCiAddrType indicates the address type of svcDhcpLseStateCiAddr. |
| OCT svcDhcpLseStateClientId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.19 | OCTET STRING | read-only | The value of svcDhcpLseStateClientId indicates the DHCPv6 clients unique identifier (DUID) as generated by the client. |
| IP svcDhcpLseStateDefaultRouter | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.31 | InetAddress | read-only | The value of svcDhcpLseStateDefaultRouter indicates the default router received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateDefaultRouterTp | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.30 | InetAddressType | read-only | The value of svcDhcpLseStateDefaultRouterTp indicates the address type of svcDhcpLseStateDefaultRouter. |
| IP svcDhcpLseStateDhcpClientAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.46 | InetAddress | read-only | The value of svcDhcpLseStateDhcpClientAddr indicates the IP address of the DHCP Client that owns the lease info. In some cases this address can be different from the address specified in svcDhcpLseStateCiAddr, e.g. in case of DHCPv6 prefix delegation. |
| IPt svcDhcpLseStateDhcpClientAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.45 | InetAddressType | read-only | The value of svcDhcpLseStateDhcpClientAddrType indicates the address type of svcDhcpLseStateDhcpClientAddr. |
| IP svcDhcpLseStateDhcpServerAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.41 | InetAddress | read-only | The value of svcDhcpLseStateDhcpServerAddr indicates the IP address of the DHCP server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateDhcpServerAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.40 | InetAddressType | read-only | The value of svcDhcpLseStateDhcpServerAddrType indicates the address type of svcDhcpLseStateDhcpServerAddr. |
| TMN svcDhcpLseStateEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.5 | TmnxEncapVal | read-only | When the value of svcDhcpLseStateLocale is 'sap', the object svcDhcpLseStatePortId along with the object svcDhcpLseStateEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| T/F svcDhcpLseStateEvaluateState | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.4 | TruthValue | read-write | The value of svcDhcpLseStateEvaluateState allows to cause a re-evaluation of the specified lease state. When this object is set to 'true', the system will perform a re-evaluation of the lease state. GETs and GETNEXTs on this variable return false. It is not possible to simultaneously request for a lease-state re-evaluation, and modify any of the svcDhcpLseStateModifySubIndent, svcDhcpLseStateModifySubProfile or svcDhcpLseStateModifySlaProfile values. |
| T/F svcDhcpLseStateForceRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.25.1.1 | TruthValue | read-write | The value of svcDhcpLseStateForceRenew allows to force the DHCP client to renew its lease. When the value of this object is set to 'true', the system will send a forcerenew DHCP message to the client. GETs and GETNEXTs on this variable return false. |
| IP svcDhcpLseStateFramedIpNetMask | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.27 | InetAddress | read-only | The value of svcDhcpLseStateFramedIpNetMask indicates the framed IP netmask received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateFramedIpNetMaskTp | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.26 | InetAddressType | read-only | The value of svcDhcpLseStateFramedIpNetMaskTp indicates the address type of svcDhcpLseStateFramedIpNetMask. |
| U32 svcDhcpLseStateIAID | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.20 | Unsigned32 | read-only | The value of svcDhcpLseStateIAID indicates the Identity Association ID (IAID) the address or prefix defined by svcDhcpLseStateCiAddr/svcDhcpLseStateCiAddrMaskLen has been assigned to. This object is only meaningful for DHCPv6 leases. |
| IAI svcDhcpLseStateIAIDType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.21 | IAIDType | read-only | The value of svcDhcpLseStateIAIDType indicates the type of svcDhcpLseStateIAID. This object is only meaningful for DHCPv6 leases. |
| STR svcDhcpLseStateInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.48 | DisplayString | read-only | The object svcDhcpLseStateInterDestId indicates the intermediate destination identifier received from either the DHCP or the Radius server or the local user database as indicated by the value of svcDhcpLseStateOriginStrings. |
| T/F svcDhcpLseStateLeaseSplitActive | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.47 | TruthValue | read-only | The value of svcDhcpLseStateLeaseSplitActive indicates whether or not the current lease time resulted from a lease split. If svcDhcpLseStateLeaseSplitActive is 'true', the lease time passed to the client is determined by the value of the object sapTlsDhcpProxyLeaseTime for VPLS SAPs, or by the value of the object vRtrIfDHCPProxyLeaseTime for Layer 3 interfaces. |
| INT svcDhcpLseStateLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.3 | INTEGER | read-only | The value of svcDhcpLseStateLocale specifies if the DHCP lease state is learned via a SAP or SDP. |
| STR svcDhcpLseStateModifyAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.6 | TmnxAncpStringOrZero | read-write | The value of svcDhcpLseStateModifyAncpString allows to specify a new ANCP-string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new ANCP-string. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifyAppProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.7 | DisplayString | read-write | The value of svcDhcpLseStateModifyAppProfile specifies a new application profile string for this lease state. When a SET of this object is done with a non empty string, the system assigns a new application profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifySlaProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.3 | DisplayString | read-write | The value of svcDhcpLseStateModifySlaProfile allows to specify a new SLA profile string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new SLA profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifySubIndent | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.1 | DisplayString | read-write | The value of svcDhcpLseStateModifySubIndent allows to specify a new subscriber name for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new subscriber name. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifySubProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.2 | DisplayString | read-write | The value of svcDhcpLseStateModifySubProfile allows to specify a new subscriber profile string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new subscriber profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.5 | DisplayString | read-write | The value of svcDhcpLseStateModInterDestId allows to specify a new intermediate destination id for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new intermediate destination id. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| MAC svcDhcpLseStateNewChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.23 | MacAddress | accessible-for-notify | The value of the object svcDhcpLseStateNewChAddr indicates the client MAC address specified in the DHCP PDU causing the trap. |
| IP svcDhcpLseStateNewCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.22 | IpAddress | accessible-for-notify | The value of the object svcDhcpLseStateNewCiAddr indicates the client IP address specified in the DHCP PDU causing the trap. |
| MAC svcDhcpLseStateNextHopMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.54 | MacAddress | read-only | The value of svcDhcpLseStateNextHopMacAddr indicates the MAC address of the next hop of this DHCP lease state. Normally, the next hop MAC address equals the value of svcDhcpLseStateChAddr. If the value of the object ALCATEL-IND1-TIMETRA-VRTR-MIB::vRtrIfDHCPLayer2Header is set to 'true', a routing device can be present between this node and the DHCP client. In that case, the value of the next hop MAC address contains the MAC address of this routing device. |
| MAC svcDhcpLseStateOldChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.21 | MacAddress | accessible-for-notify | The value of the object svcDhcpLseStateOldChAddr indicates the client MAC address that was formerly assigned to the specified DHCP lease state. |
| IP svcDhcpLseStateOldCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.20 | IpAddress | accessible-for-notify | The value of the object svcDhcpLseStateOldCiAddr indicates the client IP address that was formerly assigned to the specified DHCP lease state. |
| OCT svcDhcpLseStateOption82 | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.10 | OCTET STRING | read-only | The value of svcDhcpLseStateOption82 indicates the content of option 82 for this DHCP lease state. |
| DHC svcDhcpLseStateOriginLeaseInfo | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.44 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLseStateOriginLeaseInfo indicates which server provided the lease state information. |
| DHC svcDhcpLseStateOriginStrings | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.43 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLseStateOriginStrings indicates which server provided the Sub-profile, SLA profile, Ancp string and Intermediate Destination Id. |
| DHC svcDhcpLseStateOriginSubscrId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.42 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLseStateOriginSubscrId indicates which source provided the subscriber-id. |
| U32 svcDhcpLseStatePersistKey | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.11 | Unsigned32 | read-only | The value of svcDhcpLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file. |
| STR svcDhcpLseStatePopulateError | 1.3.6.1.4.1.6527.3.1.2.4.6.26 | DisplayString | accessible-for-notify | The value of the object svcDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease State table upon reception of a DHCP ACK message. |
| TMN svcDhcpLseStatePortId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.4 | TmnxPortID | read-only | When the value of svcDhcpLseStateLocale is 'sap', the object svcDhcpLseStatePortId along with the object svcDhcpLseStateEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP svcDhcpLseStatePrimaryDns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.33 | InetAddress | read-only | The value of svcDhcpLseStatePrimaryDns indicates the primary DNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStatePrimaryDnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.32 | InetAddressType | read-only | The value of svcDhcpLseStatePrimaryDnsType indicates the address type of svcDhcpLseStatePrimaryDns. |
| IP svcDhcpLseStatePrimaryNbns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.50 | InetAddress | read-only | The value of svcDhcpLseStatePrimaryNbns indicates the primary NBNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStatePrimaryNbnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.49 | InetAddressType | read-only | The value of svcDhcpLseStatePrimaryNbnsType indicates the address type of svcDhcpLseStatePrimaryNbns. |
| U32 svcDhcpLseStateRemainLseTime | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.9 | Unsigned32 | read-only | The value of svcDhcpLseStateRemainLseTime indicates the remaining lease time of the DHCP lease state. |
| NTF svcDHCPLseStateRestoreProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.14 | The svcDHCPLseStateRestoreProblem notification is generated when an an error is detected while processing a persistency record. | ||
| NUM svcDhcpLseStateRetailerIf | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.24 | InterfaceIndexOrZero | read-only | The value of svcDhcpLseStateRetailerIf indicates the interface index of the retailer VPRN interface to which this DHCP lease belongs. When this object is non zero, the DHCP lease belongs to a retailer VPRN. |
| TMN svcDhcpLseStateRetailerSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.23 | TmnxServId | read-only | The value of svcDhcpLseStateRetailerSvcId indicates the service ID of the retailer VPRN service to which this DHCP lease belongs. When this object is non zero, the DHCP lease belongs to a retailer VPRN. |
| SDP svcDhcpLseStateSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.6 | SdpId | read-only | When the value of svcDhcpLseStateLocale is 'sdp', the object svcDhcpLseStateSdpId, along with the object svcDhcpLseStateVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP svcDhcpLseStateSecondaryDns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.35 | InetAddress | read-only | The value of svcDhcpLseStateSecondaryDns indicates the secondary DNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateSecondaryDnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.34 | InetAddressType | read-only | The value of svcDhcpLseStateSecondaryDnsType indicates the address type of svcDhcpLseStateSecondaryDns. |
| IP svcDhcpLseStateSecondaryNbns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.52 | InetAddress | read-only | The value of svcDhcpLseStateSecondaryNbns indicates the secondary NBNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateSecondaryNbnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.51 | InetAddressType | read-only | The value of svcDhcpLseStateSecondaryNbnsType indicates the address type of svcDhcpLseStateSecondaryNbns. |
| DAT svcDhcpLseStateServerLastRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.38 | DateAndTime | read-only | The value of svcDhcpLseStateServerLastRenew indicates when we last received a renewal from either the DHCP or the Radius server. |
| DAT svcDhcpLseStateServerLeaseEnd | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.39 | DateAndTime | read-only | The value of svcDhcpLseStateServerLeaseEnd indicates when the server will consider the lease as being expired. |
| DAT svcDhcpLseStateServerLeaseStart | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.37 | DateAndTime | read-only | The value of svcDhcpLseStateServerLeaseStart indicates when this lease was created. |
| U32 svcDhcpLseStateSessionTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.36 | Unsigned32 | read-only | The value of svcDhcpLseStateSessionTimeout indicates the session timeout received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. |
| U32 svcDhcpLseStateShcvChecks | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.16 | Unsigned32 | read-only | The value of svcDhcpLseStateShcvChecks indicates the number of host connectivity check requests for this DHCP lease state. |
| INT svcDhcpLseStateShcvOperState | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.15 | INTEGER | read-only | The value of svcDhcpLseStateShcvOperState indicates the state of the subscriber host connectivity check for this DHCP lease state. |
| U32 svcDhcpLseStateShcvReplies | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.17 | Unsigned32 | read-only | The value of svcDhcpLseStateShcvReplies indicates the number of host connectivity replies for this DHCP lease state. |
| TIM svcDhcpLseStateShcvReplyTime | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.18 | TimeStamp | read-only | The value of svcDhcpLseStateShcvReplyTime indicates the time of the last successful host connectivity check for this DHCP lease state. |
| STR svcDhcpLseStateSlaProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.14 | DisplayString | read-only | The value of svcDhcpLseStateSlaProfString indicates the SLA profile string applicable for this DHCP lease state. The value of svcDhcpLseStateOriginStrings indicates whether this SLA profile string was received from the DHCP or from the Radius server. |
| STR svcDhcpLseStateSubProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.13 | DisplayString | read-only | The value of svcDhcpLseStateSubProfString indicates the subscriber profile string applicable for this DHCP lease state. The value of svcDhcpLseStateOriginStrings indicates whether this subscriber profile string was received from the DHCP or from the Radius server. |
| STR svcDhcpLseStateSubscrIdent | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.12 | DisplayString | read-only | The value of svcDhcpLseStateSubscrIdent indicates the id of the parent subscriber of this DHCP lease state. The value of svcDhcpLseStateOriginSubscrId indicates whether this subscriber identification was received from the DHCP or from the Radius server. |
| U32 svcDhcpLseStateVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.7 | Unsigned32 | read-only | When the value of svcDhcpLseStateLocale is 'sdp', the object svcDhcpLseStateSdpId, along with the object svcDhcpLseStateVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| svcDhcpManagedRouteEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1 | not-accessible | A specific DHCP managed route. | |
| IP svcDhcpManagedRouteInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.2 | InetAddress | not-accessible | The value of svcDhcpManagedRouteInetAddr indicates the IP address of the managed route. |
| IPt svcDhcpManagedRouteInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.1 | InetAddressType | not-accessible | The value of svcDhcpManagedRouteInetAddrType indicates the address type of svcDhcpManagedRouteInetAddr. |
| ADR svcDhcpManagedRoutePrefixLen | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.3 | InetAddressPrefixLength | not-accessible | The value of svcDhcpManagedRoutePrefixLen indicates the prefix length of the subnet associated with svcDhcpManagedRouteInetAddr. |
| TMN svcDhcpManagedRouteStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.4 | TmnxManagedRouteStatus | read-only | The value of svcDhcpManagedRouteStatus indicates the state of this managed route. |
| svcDhcpManagedRouteTable | 1.3.6.1.4.1.6527.3.1.2.4.2.43 | not-accessible | A table that contains DHCP managed routes. | |
| NTF svcDHCPMiscellaneousProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.23 | The svcDHCPMiscellaneousProblem notification is generated on miscellaneous DHCP problems. | ||
| STR svcDhcpPacketProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.25 | DisplayString | accessible-for-notify | The value of the object svcDhcpPacketProblem indicates information on a received DHCP packet that is considered suspicious by the system. |
| STR svcDhcpProxyError | 1.3.6.1.4.1.6527.3.1.2.4.6.37 | DisplayString | accessible-for-notify | The value of the object svcDhcpProxyError indicates the reason why the proxy server failed to operate. |
| IP svcDhcpRestoreLseStateCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.18 | IpAddress | accessible-for-notify | The value of the object svcDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap. |
| STR svcDhcpRestoreLseStateProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.19 | DisplayString | accessible-for-notify | The value of the object svcDhcpRestoreLseStateProblem indicates why the persistency record cannot be restored. |
| STR svcDhcpSubAuthError | 1.3.6.1.4.1.6527.3.1.2.4.6.39 | DisplayString | accessible-for-notify | The value of the object svcDhcpSubAuthError is a printable character string which contains information about the problem that occurred while trying to authenticate the subscriber. |
| U32 svcEndPointActiveHoldDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.11 | Unsigned32 | read-create | The value of svcEndPointActiveHoldDelay specifies the amount of time in deci-seconds to hold the active state before going into the standby state when a local MC-LAG SAP goes down. |
| SER svcEndPointDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.3 | ServObjDesc | read-create | The value of svcEndPointDescription specifies the textual description of this service endpoint. |
| svcEndPointEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1 | not-accessible | Each row entry represents a particular service endpoint. Entries are created/deleted by the user. | |
| TMN svcEndPointForceSwitchOver | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.9 | TmnxActionType | read-create | The value of svcEndPointForceSwitchOver specifies whether to force a switchover of the active SDP bind. When it is set to 'doAction', the SDP bind specified by svcEndPointForceSwitchOverSdpId will become active. |
| SDP svcEndPointForceSwitchOverSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10 | SdpBindId | read-create | The value of svcEndPointForceSwitchOverSdpId specifies the SDP bind to switch over to when svcEndPointForceSwitchOver is set to 'doAction'. If the value of this object is non default, it indicates that a forced switchover has taken place. Setting this object to the default value clears any previous forced switchover. |
| T/F svcEndPointIgnoreStandbySig | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.12 | TruthValue | read-create | The value of svcEndPointIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored. When set to 'true', this bit is not considered in the internal tasks. A similar object sdpBindTlsIgnoreStandbySig is present at the SDP level. The value of sdpBindTlsIgnoreStandbySig is set to the value of svcEndPointIgnoreStandbySig for the spoke-SDP associated with this endpoint. |
| I32 svcEndPointMacLimit | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.14 | Integer32 | read-create | The value of the object svcEndPointMacLimit specifies the maximum number of learned and static entries allowed for this end-point. The value 0 means: no limit for this end-point. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of svcEndPointMacLimit is '131071'. |
| NTF svcEndPointMacLimitAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.19 | The svcEndPointMacLimitAlarmCleared notification is sent whenever the number of MAC addresses stored in the FDB for this endpoint drops below the watermark specified by the object svcTlsFdbTableFullLowWatermark. This alarm also takes into consideration static MAC addresses configured on the endpoint and learned MAC addresses in all spokes associated with this endpoint. | ||
| NTF svcEndPointMacLimitAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.18 | The svcEndPointMacLimitAlarmRaised notification is sent whenever the number of MAC addresses stored in the FDB for this endpoint exceeds the watermark specified by the object svcTlsFdbTableFullHighWatermark. This alarm also takes into consideration static MAC addresses configured on the endpoint and learned MAC addresses in all spokes associated with this endpoint. | ||
| TMN svcEndPointMacPinning | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.13 | TmnxEnabledDisabled | read-create | The value of svcEndPointMacPinning specifies whether or not MAC address pinning is active on this end-point. |
| TNA svcEndPointName | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.1 | TNamedItem | not-accessible | The value of svcEndPointName specifies the name of the service endpoint. |
| I32 svcEndPointRevertTime | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.4 | Integer32 | read-create | The value of svcEndPointRevertTime specifies the time to wait before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a backup spoke-sdp. When the value is '-1', the spoke-sdp will never revert back. |
| I32 svcEndPointRevertTimeCountDn | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.16 | Integer32 | read-only | The value of svcEndPointRevertTimeCountDn indicates the timer count down before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a backup spoke-sdp. This timer count down begins after primary Spoke SDP becomes operational. The value of -1 indicates when revert is not-applicable. |
| ROW svcEndPointRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.2 | RowStatus | read-create | The value of svcEndPointRowStatus is used for the creation and deletion of service endpoints. |
| T/F svcEndPointSuppressStandbySig | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.15 | TruthValue | read-create | The value of the object svcEndPointSuppressStandbySig specifies whether the 'pseudo wire forwarding standby' bit will be sent to the LDP peer whenever the spoke SDP 'svcEndPointTxActiveSdpId' is selected as standby. When set to 'true', this bit will not be sent. |
| svcEndPointTable | 1.3.6.1.4.1.6527.3.1.2.4.2.19 | not-accessible | The svcEndPointTable has an entry for each service endpoint configured on this system. | |
| C32 svcEndPointTxActiveChangeCount | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.17 | Counter32 | read-only | The value of svcEndPointTxActiveChangeCount indicates the number of times active transmit change has taken place in this endpoint. |
| TMN svcEndPointTxActiveEncap | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.7 | TmnxEncapVal | read-only | The value of svcEndPointTxActiveEncap indicates the encapsulation value of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'. |
| TIM svcEndPointTxActiveLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.18 | TimeStamp | read-only | The value of svcEndPointTxActiveLastChange indicates the value of sysUpTime at the time of the last active transmit change in this endpoint. |
| TMN svcEndPointTxActivePortId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.6 | TmnxPortID | read-only | The value of svcEndPointTxActivePortId indicates the Port ID of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'. |
| SDP svcEndPointTxActiveSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.8 | SdpBindId | read-only | The value of svcEndPointTxActiveSdpId indicates the SDP bind ID of the SDP bind that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sdpBind'. |
| INT svcEndPointTxActiveType | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.5 | INTEGER | read-only | The value of svcEndPointTxActiveType indicates the type of end-point object that is current transmit active. |
| TIK svcEndPointTxActiveUpTime | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.19 | TimeTicks | read-only | The value of svcEndPointTxActiveUpTime indicates the active 'up' time (in hundredths of a second) of the end-point object that is current transmit active. |
| MAC svcEpipePbbBvplsDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.4 | MacAddress | read-create | The value of svcEpipePbbBvplsDstMac specifies the Backbone Destination MAC-Address for Provider Backbone Bridging packets. This object must be set along with svcEpipePbbBvplsSvcId. |
| TMN svcEpipePbbBvplsSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.3 | TmnxServId | read-create | The value of svcEpipePbbBvplsSvcId specifies the Backbone-VPLS service for the PBB tunnel associated with this service. This object must be set at the creation time and can not be modified later. |
| svcEpipePbbEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1 | not-accessible | Each row entry contains objects that allows the modification of the PBB objects for an 'epipe' service. | |
| TIM svcEpipePbbLastChngd | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.2 | TimeStamp | read-only | The value of svcEpipePbbLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcEpipePbbRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.1 | RowStatus | read-create | The value of svcEpipePbbRowStatus is used for the creation and deletion of Provider Backbone Bridging information in a EPIPE service. To create an entry in the table, svcEpipePbbBvplsSvcId, svcEpipePbbBvplsDstMac, svcEpipePbbSvcISID objects must be set. |
| SVC svcEpipePbbSvcISID | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.5 | SvcISID | read-create | The value of the object svcEpipePbbSvcISID specifies a 24 bit (0..16777215) service instance identifier for the PBB tunnel associated with this service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. This object must be set along with svcEpipePbbBvplsSvcId. |
| svcEpipePbbTable | 1.3.6.1.4.1.6527.3.1.2.4.2.37 | not-accessible | The svcEpipePbbTable contains objects related to Provider Backbone Bridging (PBB) feature as relates to 'epipe' services. Entries are created and destroyed using svcEpipePbbRowStatus object. | |
| TIM svcEpipePbbTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.36 | TimeStamp | read-only | The value of svcEpipePbbTableLastChanged indicates the sysUpTime at the time of the last modification of svcEpipePbbTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| NTF svcFdbMimDestTblFullAlrm | 1.3.6.1.4.1.6527.3.1.3.4.2.0.21 | The svcFdbMimDestTblFullAlrm notification is raised when system limit of Backbone MAC address indices limit is reached. Further traps are not generated as long as the value of svcTotalFdbMimDestIdxEntries object remains under 5 percent of the limit. | ||
| NTF svcFdbMimDestTblFullAlrmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.22 | The svcFdbMimDestTblFullAlrmCleared notification is raised when number of Backbone MAC address indices used reaches under 95 percent of the system limit after svcFdbMimDestTblFullAlrm notification had been raised. | ||
| TMN svcId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.1 | TmnxServId | read-only | The value of the object svcId specifies the Service identifier. This value should be unique within the service domain. |
| svcIfDHCP6MsgStatEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1 | not-accessible | Each row entry represents a collection of counters for each DHCP6 message type for an interface in a service. Entries cannot be created and deleted via SNMP SET operations. | |
| G32 svcIfDHCP6MsgStatsDropped | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.4 | Gauge32 | read-only | The value of svcIfDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped on this service interface. |
| TIM svcIfDHCP6MsgStatsLstClrd | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.1 | TimeStamp | read-only | The value of svcIfDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized. |
| G32 svcIfDHCP6MsgStatsRcvd | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.2 | Gauge32 | read-only | The value of svcIfDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received on this service interface. |
| G32 svcIfDHCP6MsgStatsSent | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.3 | Gauge32 | read-only | The value of svcIfDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent on this service interface. |
| svcIfDHCP6MsgStatTable | 1.3.6.1.4.1.6527.3.1.2.4.2.26 | not-accessible | The vRtrDHCP6MsgStatTable has an entry for each interface defined in a service for which DHCP6 can be enabled. | |
| TMN svcIpRouting | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.5 | TmnxEnabledDisabled | read-create | The value of the object svcIpRouting specifies, for a 'tls' service, whether IP routing is enabled. For 'epipe', 'p3pipe', 'apipe', 'fpipe', 'ipipe' and 'cpipe' services, this object cannot be set and has the value 'disabled', whereas for 'vprn' and 'ies' services the value is 'enabled' and cannot be set either. For 'tls' services the value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| TIM svcLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.12 | TimeStamp | read-only | The value of of the object svcLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this service. |
| TIM svcLastStatusChange | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.17 | TimeStamp | read-only | The value of the object svcLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his service. |
| T/F svcMgmtVpls | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.19 | TruthValue | read-create | The value of the object svcMgmtVpls specifies, only if svcType = 'tls' whether or not the service is a management vpls. If set to false the service is acting as a regular VPLS service. If set to true, the service is acting as a management VPLS service. This implies that RSTP will always be enabled, and that the conclusions of this RSTP can be associated to different (regular) VPLSs. The value of this object cannot be changed after creation. |
| MST svcMstiInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.6.43 | MstiInstanceId | accessible-for-notify | The value of the object svcMstiInstanceId indicates the Multiple Spanning Tree Instance. |
| INT svcMtu | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.7 | INTEGER | read-create | The value of the object svcMtu specifies the largest frame size (in octets) that this service can handle. The default value of this object depends on the service type: 1514 octets for epipe, p3pipe and tls, 1508 for apipe and fpipe, and 1500 octets for vprn, ipipe and ies, 1514 octets for cpipe. |
| I32 svcNumEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.1 | Integer32 | read-only | The current number of services configured on this node. |
| I32 svcNumSaps | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.10 | Integer32 | read-only | The value of the object svcNumSaps indicates the number of SAPs defined on this service. |
| I32 svcNumSdps | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.11 | Integer32 | read-only | The value of the object svcNumSdps indicates the number of SDPs bound to this service. |
| SER svcOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.9 | ServiceOperStatus | read-only | The value of the object svcOperStatus indicates the operating state of this service. The requirements for a service to be operationally up depend on the service type: epipe, p3pipe, apipe, fpipe, ipipe and cpipe services are 'up' when the service is administratively up and either both SAP's or a SAP and a spoke SDP Bind are operationally up. tls services are 'up' when the service is administratively up and either at least two SAP's or spoke SDP Bind's, or one SAP or spoke SDP Bind and at least one mesh SDP Bind are operationally up. vprn and ies services are 'up' when the service is administratively up and at least one interface is operationally up. |
| svcPEDiscoveryPolicyEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1 | not-accessible | svcPEDiscoveryPolicyEntry is an entry (conceptual row) in the svcPEDiscoveryPolicyTable. Each entry represents the configuration of a PE Discovery Policy. Entries in this table can be created and deleted via SNMP SET operations to svcPEDiscoveryPolicyRowStatus. | |
| U32 svcPEDiscoveryPolicyInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.4 | Unsigned32 | read-create | The value of svcPEDiscoveryPolicyInterval specifies the polling interval for Radius PE discovery in minutes. |
| TNA svcPEDiscoveryPolicyName | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.1 | TNamedItem | not-accessible | The value of the object svcPEDiscoveryPolicyName specifies the RADIUS PE Discovery Policy name. |
| OCT svcPEDiscoveryPolicyPassword | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.3 | OCTET STRING | read-create | The value of svcPEDiscoveryPolicyPassword specifies the password that is used when contacting the RADIUS server for VPLS auto-discovery. The value of svcPEDiscPolServerSecret cannot be set to an empty string. GETs and GETNEXTs on this variable return an empty string. |
| ROW svcPEDiscoveryPolicyRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.2 | RowStatus | read-create | svcPEDiscoveryPolicyRowStatus controls the creation and deletion of rows in the table. To create a row in the svcPEDiscoveryPolicyTable, set svcPEDiscoveryPolicyRowStatus to 'createAndGo'. All objects will take on default values and the agent will change svcPEDiscoveryPolicyRowStatus to 'active'. To delete a row in the svcPEDiscoveryPolicyTable, set svcPEDiscoveryPolicyRowStatus to 'delete'. |
| svcPEDiscoveryPolicyTable | 1.3.6.1.4.1.6527.3.1.2.4.2.22 | not-accessible | The svcPEDiscoveryPolicyTable has an entry for each PE policy. | |
| U32 svcPEDiscoveryPolicyTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.5 | Unsigned32 | read-create | The value of svcPEDiscoveryPolicyTimeout specifies the number of seconds to wait before timing out a RADIUS server. |
| IP svcPEDiscPolServerAddress | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.4 | InetAddress | read-create | The value of svcPEDiscPolServerAddress is used to configure the IP address of the RADIUS server. |
| IPt svcPEDiscPolServerAddressType | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.3 | InetAddressType | read-create | The value of svcPEDiscPolServerAddressType is used to configure the address type of svcPEDiscPolServerAddress address. |
| svcPEDiscPolServerEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1 | not-accessible | svcPEDiscPolServerEntry is an entry (conceptual row) in the svcPEDiscPolServerTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to svcPEDiscPolServerRowStatus. | |
| U32 svcPEDiscPolServerIndex | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.1 | Unsigned32 | not-accessible | The svcPEDiscPolServerIndex indicates the unique value which identifies a specific radius server. |
| SER svcPEDiscPolServerOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.6 | ServiceOperStatus | read-only | The svcPEDiscPolServerOperStatus indicates the current status of the RADIUS server. |
| U32 svcPEDiscPolServerPort | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.7 | Unsigned32 | read-create | The svcPEDiscPolServerPort is used to configure the UDP port number on which to contact the RADIUS server. |
| ROW svcPEDiscPolServerRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.2 | RowStatus | read-create | svcPEDiscPolServerRowStatus controls the creation and deletion of rows in the table. To create a row in the svcPEDiscPolServerTable, set svcPEDiscPolServerRowStatus to 'createAndGo'. All objects except svcPEDiscPolServerSecret will take on default values and the agent will change svcPEDiscPolServerRowStatus to 'active'. A value for svcPEDiscPolServerSecret must be always specified or else the row creation will fail. To delete a row in the svcPEDiscPolServerTable, set tmnxRadiusServerRowStatus to 'delete'. |
| OCT svcPEDiscPolServerSecret | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.5 | OCTET STRING | read-create | The svcPEDiscPolServerSecret is used to configure the secret key associated with the RADIUS server. The value of svcPEDiscPolServerSecret cannot be set to an empty string. GETs and GETNEXTs on this variable return an empty string. |
| svcPEDiscPolServerTable | 1.3.6.1.4.1.6527.3.1.2.4.2.23 | not-accessible | The svcPEDiscPolServerTable has an entry for each RADIUS server. The table can have up to a maximum of 5 entries. | |
| NTF svcPersistencyProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.24 | The svcPersistencyProblem notification is generated on persistency problems. | ||
| T/F svcRadiusDiscovery | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.20 | TruthValue | read-create | The value of the object svcRadiusDiscovery specifies whether RADIUS auto-discovery is enabled on this service. |
| SER svcRadiusDiscoveryShutdown | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.25 | ServiceAdminStatus | read-create | The value of svcRadiusDiscoveryShutdown specifies the desired administrative state for the RADIUS auto-discovery server. When the server is 'down' the operational state of the server is disabled. By default, state of the RADIUS auto-discovery server is 'down'. |
| TNA svcRadiusPEDiscPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.24 | TNamedItemOrEmpty | read-create | The value of the object svcRadiusPEDiscPolicy specifies the RADIUS PE Discovery Policy name. |
| STR svcRadiusUserName | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.22 | DisplayString | read-create | The value of the object svcRadiusUserName specifies the RADIUS user name. svcRadiusUserNameType specifies the type of the username and has to be set along with svcRadiusUserName when svcRadiusUserName can either be a vpn-id or a router-distinguisher. |
| INT svcRadiusUserNameType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.21 | INTEGER | read-create | The value of the object svcRadiusUserNameType specifies whether RADIUS user name is vpn-id or router-distinguisher. By default, the value of this object is 'none'. svcRadiusUserNameType and svcRadiusUserName, which indicates the RADIUS username, must be set together in the same SNMP request PDU if svcRadiusUserNameType is vpn-id or router-distinguisher or else the set request will fail with an inconsistentValue error. |
| ROW svcRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.2 | RowStatus | read-create | This value of the object svcRowStatus specifies the status of this row. To delete an entry from this table, the corresponding service must be administratively down, have no SAP's defined on it, and have no SDP bindings. For svcType 'vprn', the service can be associated with a routing instance by specifying svcVRouterId during the creation of the service. The value of the object svcVplsType specifies the VPLS service type. The value of this object must be specified when the row is created and cannot be changed while the svcRowStatus is 'active'. |
| NTF svcStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.3 | The svcStatusChanged notification is generated when there is a change in the administrative or operating status of a service. | ||
| svcTlsBackboneInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1 | not-accessible | Each row entry contains objects that allows the modification of the Provider Backbone Bridging feature for a specific TLS service | |
| svcTlsBackboneInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.27 | not-accessible | The svcTlsBackboneInfoTable augments the svcTlsInfoTable. The table allows the operator to modify attributes of the Provider Backbone Bridging feature. | |
| T/F svcTlsBackboneLDPMacFlush | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.6 | TruthValue | read-write | The value of svcTlsBackboneLDPMacFlush specifies whether 'LDP MAC withdraw all from me' message received in the 'iVpls' domain should attempt to generate a new 'LDP MAC withdraw all from me' message in the 'bVpls' domain. Generation of the 'LDP MAC withdraw all from me' message is still constrained by the svcTlsMacFlushOnFail value in the 'bVpls'. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. |
| MAC svcTlsBackboneOperSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.4 | MacAddress | read-only | The value of svcTlsBackboneOperSrcMac indicates the operational Backbone Source MAC-Address for Provider Backbone Bridging packets. |
| SVC svcTlsBackboneOperVplsSvcISID | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.5 | SvcISID | read-only | The value of svcTlsBackboneOperVplsSvcISID indicates operational value of service instance identifier used for this service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. |
| MAC svcTlsBackboneSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.1 | MacAddress | read-write | The value of svcTlsBackboneSrcMac specifies the Backbone Source MAC-Address for Provider Backbone Bridging packets. If not provisioned, it defaults to the loopback chassis MAC-Address. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'bVpls'. |
| TMN svcTlsBackboneVplsStp | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.7 | TmnxEnabledDisabled | read-write | The value of svcTlsBackboneVplsStp specifies whether STP is enabled on the Backbone VPLS specified by svcTlsBackboneVplsSvcId. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls' or if an attempt is made to set this object to enable when the value of svcTlsBackboneVplsSvcId is set to the default. The value of this object is set to disable when the value of svcTlsBackboneVplsSvcId is set to default. |
| TMN svcTlsBackboneVplsSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.2 | TmnxServId | read-write | The value of svcTlsBackboneVplsSvcId specifies the Backbone-VPLS service associated with this service. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. Setting the value of this object to its default value will also set the value of svcTlsBackboneVplsStp to its default value. |
| SVC svcTlsBackboneVplsSvcISID | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.3 | SvcISID | read-write | The value of the object svcTlsBackboneVplsSvcISID specifies a 24 bit (0..16777215) service instance identifier for this service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. The default value of -1 is used to indicate the value of this object is un-specified. This object must be set along with svcTlsBackboneVplsSvcId. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. |
| TMN svcTlsBgpADAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.18 | TmnxEnabledDisabled | read-create | The value of svcTlsBgpADAdminStatus specifies the desired administrative state for BGP Auto-Discovery in this VPLS service. |
| svcTlsBgpADEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1 | not-accessible | A BGP Auto-Discovery entry in the svcTlsBgpADTable. | |
| TNA svcTlsBgpADExportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.6 | TNamedItemOrEmpty | read-create | The value of svcTlsBgpADExportRteTarget specifies the extended community name for the default export policy to use for BGP Auto-Discovery in this VPLS service. This object cannot be set to a non-empty if svcTlsBgpADExportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. |
| TNA svcTlsBgpADImportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.12 | TNamedItemOrEmpty | read-create | The value of svcTlsBgpADImportRteTarget specifies the extended community name for the default import policy to use for BGP Auto-Discovery in this VPLS service. This object cannot be set to a non-empty if svcTlsBgpADImportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. |
| TIM svcTlsBgpADLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.2 | TimeStamp | read-only | The value of svcTlsBgpADLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcTlsBgpADRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.1 | RowStatus | read-create | The value of svcTlsBgpADRowStatus is used for the creation and deletion of BGP Auto-Discovery context in a VPLS service. |
| svcTlsBgpADTable | 1.3.6.1.4.1.6527.3.1.2.4.2.31 | not-accessible | svcTlsBgpADTable contains entries for BGP Auto-Discovery in a VPLS service context. | |
| TIM svcTlsBgpADTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.30 | TimeStamp | read-only | The value of svcTlsBgpADTableLastChanged indicates the sysUpTime at the time of the last modification of svcTlsBgpADTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcTlsBgpADVplsId | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.3 | TmnxVPNRouteDistinguisher | read-create | The value of svcTlsBgpADVplsId specifies the globally unique VPLS-id for BGP Auto-Discovery in this VPLS service. The value of svcTlsBgpADAdminStatus cannot be 'enabled' until a VPLS-id has been assigned which is not all zeros. |
| TPO svcTlsBgpADVsiExportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.7 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy1 specifies the name of the first VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiExportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.8 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy2 specifies the name of the second VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiExportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.9 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy3 specifies the name of the third VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiExportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.10 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy4 specifies the name of the forth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiExportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.11 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy5 specifies the name of the fifth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiImportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.13 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy1 specifies the name of the first VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiImportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.14 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy2 specifies the name of the second VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiImportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.15 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy3 specifies the name of the third VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiImportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.16 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy4 specifies the name of the forth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpADVsiImportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.17 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy5 specifies the name of the fifth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| U32 svcTlsBgpADVsiPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.4 | Unsigned32 | read-create | The value of svcTlsBgpADVsiPrefix specifies the low-order 4 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP Auto-Discovery in this VPLS service. If the value of svcTlsBgpADVsiPrefix is 0, the system IP address will be used. |
| TMN svcTlsBgpADVsiRD | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.5 | TmnxVPNRouteDistinguisher | read-create | The value of svcTlsBgpADVsiRD specifies the high-order 6 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP Auto-Discovery in this VPLS service. If the value of svcTlsBgpADVsiRD is 0x0000000000000000, the lower 6 bytes of the VPLS-id, as specified by svcTlsBgpADVplsId, will be used. |
| TMN svcTlsCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.37 | TmnxCustId | read-only | The vakue of the object svcTlsCustId indicates the Customer ID of the associated TLS service. |
| NTF svcTlsDHCPLseStatePopulateErr | 1.3.6.1.4.1.6527.3.1.3.4.2.0.13 | The svcTlsDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded. | ||
| NTF svcTlsDHCPLseStRestoreProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.12 | The svcTlsDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record. | ||
| TMN svcTlsDiscardUnknownDest | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.2 | TmnxEnabledDisabled | read-write | The value of the object svcTlsDiscardUnknownDest specifies whether frames received with an unknown destination MAC are discarded in this TLS. |
| I32 svcTlsFdbLocalAgeTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.6 | Integer32 | read-write | The value of the object svcTlsFdbLocalAgeTime specifies the number of seconds used to age out TLS FDB entries learned on local SAPs. |
| I32 svcTlsFdbNumDhcpEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.60 | Integer32 | read-only | The value of the object svcTlsFdbNumDhcpEntries indicates the current number of dhcp-learned entries in the FDB of this service. |
| I32 svcTlsFdbNumEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.4 | Integer32 | read-only | The value of the object svcTlsFdbNumEntries indicates the current number of entries in the FDB of this service. |
| I32 svcTlsFdbNumHostEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.61 | Integer32 | read-only | The value of the object svcTlsFdbNumHostEntries indicates the current number of host-learned entries in the FDB of this service. |
| I32 svcTlsFdbNumLearnedEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.58 | Integer32 | read-only | The value of the object svcTlsFdbNumLearnedEntries indicates the current number of learned entries in the FDB of this service. |
| I32 svcTlsFdbNumOamEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.59 | Integer32 | read-only | The value of the object svcTlsFdbNumOamEntries indicates the current number of OAM entries in the FDB of this service. |
| I32 svcTlsFdbNumStaticEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.5 | Integer32 | read-only | The value of the object svcTlsFdbNumStaticEntries indicates the current number of static entries in the FDB of this service. |
| I32 svcTlsFdbRemoteAgeTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.7 | Integer32 | read-write | The value of the object svcTlsFdbRemoteAgeTime specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs. |
| NTF svcTlsFdbTableFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.5 | The svcTlsFdbTableFullAlarmCleared notification is generated when the utilization of the FDB table is below the value specified by svcTlsFdbTableFullLowWatermark. | ||
| NTF svcTlsFdbTableFullAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.4 | The svcTlsFdbTableFullAlarmRaised notification is generated when the utilization of the FDB table is above the value specified by svcTlsFdbTableFullHighWatermark. | ||
| I32 svcTlsFdbTableFullHighWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.34 | Integer32 | read-write | The value of the object svcTlsFdbTableFullHighWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsFdbTableFullLowWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.35 | Integer32 | read-write | The value of the object svcTlsFdbTableFullLowWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsFdbTableSize | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.3 | Integer32 | read-write | The value of the object svcTlsFdbTableSize specifies the maximum number of learned and static entries allowed in the FDB of this service. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of svcTlsFdbTableSize is '131071'. |
| svcTlsInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1 | not-accessible | TLS specific information about a service. | |
| svcTlsInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.3 | not-accessible | A table that contains TLS service information. | |
| T/F svcTlsL2ptTermEnabled | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.68 | TruthValue | read-only | The value of the object svcTlsL2ptTermEnabled indicates if L2PT-termination and/or Bpdu-translation is in use in this service by at least one SAP or spoke SDP Bind. If the value is 'true', it means that at least one of L2PT-termination or Bpdu-translation is enabled. When enabled it is not possible to enable stp on this service. |
| TMN svcTlsMacAgeing | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.32 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacAgeing specifies whether the MAC aging process is enabled in this TLS. |
| TMN svcTlsMacFlushOnFail | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.50 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacFlushOnFail specifies whether a special mac-flush is sent when a port or sap becomes operational down. |
| TMN svcTlsMacLearning | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.1 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacLearning specifies whether the MAC learning process is enabled in this TLS. |
| TMN svcTlsMacMoveAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.45 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacMoveAdminStatus specifies the administrative state of the MAC movement feature associated with this service. |
| U32 svcTlsMacMoveMaxRate | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.43 | Unsigned32 | read-write | The value of the object svcTlsMacMoveMaxRate specifies the maximum rate at which MAC's can be re-learned in this TLS service, before the SAP where the moving MAC was last seen is automatically disabled in order to protect the system against undetected loops or duplicate MAC's. The rate is computed as the maximum number of re-learns allowed in a 5 second interval: e.g. the default rate of 2 re-learns per second corresponds to 10 re-learns in a 5 second period. |
| U32 svcTlsMacMoveRetryTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.44 | Unsigned32 | read-write | The value of the object svcTlsMacMoveRetryTimeout specifies the time in seconds to wait before a SAP that has been disabled after exceeding the maximum re-learn rate is re-enabled. A value of zero indicates that the SAP will not be automatically re-enabled after being disabled. If after the SAP is re-enabled it is disabled again, the effective retry timeout is doubled in order to avoid thrashing. An inconsistentValue error is returned if the value of this object is set to less than fie times the value of svcTlsSecPortsCumulativeFactor. |
| NTF svcTlsMacPinningViolation | 1.3.6.1.4.1.6527.3.1.3.4.2.0.11 | The svcTlsMacPinningViolation notification is generated when an attempt is made to assign a MAC address to another interface while this MAC address is pinned (i.e. assigned fixed to an interface). | ||
| T/F svcTlsMacRelearnOnly | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.46 | TruthValue | read-only | The value of the object svcTlsMacRelearnOnly indicates when set to 'true' that either the FDB table of this TLS service is full, or that the maximum system-wide number of MAC's supported by the agent has been reached, and thus MAC learning is temporary disabled, and only MAC re-learns can take place. |
| TNA svcTlsMcPathMgmtPlcyName | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.74 | TNamedItem | read-write | The value of svcTlsMcPathMgmtPlcyName specifies the multicast policy name configured on this service. |
| NTF svcTlsMfibTableFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.10 | The svcTlsMfibTableFullAlarmCleared notification is generated when the utilization of the MFIB table is below the value specified by svcTlsMfibTableFullLowWatermark. | ||
| NTF svcTlsMfibTableFullAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.9 | The svcTlsMfibTableFullAlarmRaised notification is generated when the utilization of the MFIB table is above the value specified by svcTlsMfibTableFullHighWatermark. | ||
| I32 svcTlsMfibTableFullHighWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.48 | Integer32 | read-write | The value of the object svcTlsMfibTableFullHighWatermark specifies the utilization of the MFIB table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsMfibTableFullLowWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.49 | Integer32 | read-write | The value of the object svcTlsMfibTableFullLowWatermark specifies utilization of the MFIB table of this TLS service at which a table full alarm will be cleared by the agent. |
| I32 svcTlsMfibTableSize | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.47 | Integer32 | read-write | The value of the object svcTlsMfibTableSize specifies the maximum number of entries allowed in the MFIB table of this service. If the value is 0, then there is no limit. |
| TMN svcTlsMrpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.70 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMrpAdminStatus specifies whether the Multiple Registration Protocol (MRP) is enabled in this TLS. |
| U32 svcTlsMrpAttributeCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.72 | Unsigned32 | read-only | The value of the object svcTlsMrpAttributeCount indicates number of MRP attributes currently registered in this TLS. |
| INT svcTlsMrpAttrRegFailedReason | 1.3.6.1.4.1.6527.3.1.2.4.6.40 | INTEGER | accessible-for-notify | The value of the object svcTlsMrpAttrRegFailedReason indicates the reason for MRP attribute registration failure. |
| NTF svcTlsMrpAttrRegistrationFailed | 1.3.6.1.4.1.6527.3.1.3.4.2.0.20 | The svcTlsMrpAttrRegistrationFailed notification is generated when registration fails for an MRP attribute. | ||
| NTF svcTlsMrpAttrTblFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.26 | The svcTlsMrpAttrTblFullAlarmCleared notification is generated when the utilization of the MRP attribute table is below the value specified by svcTlsMrpAttrTblLowWatermark. | ||
| NTF svcTlsMrpAttrTblFullAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.25 | The svcTlsMrpAttrTblFullAlarmRaised notification is generated when the utilization of the MRP attribute table is above the value specified by svcTlsMrpAttrTblHighWatermark. | ||
| I32 svcTlsMrpAttrTblHighWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.76 | Integer32 | read-write | The value of the object svcTlsMrpAttrTblHighWatermark specifies the utilization of the MRP attribute table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsMrpAttrTblLowWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.77 | Integer32 | read-write | The value of the object svcTlsMrpAttrTblLowWatermark specifies utilization of the MRP attribute table of this TLS service at which a table full alarm will be cleared by the agent. |
| U32 svcTlsMrpAttrType | 1.3.6.1.4.1.6527.3.1.2.4.6.41 | Unsigned32 | accessible-for-notify | The value of the object svcTlsMrpAttrType indicates the type of MRP attribute. |
| OCT svcTlsMrpAttrValue | 1.3.6.1.4.1.6527.3.1.2.4.6.42 | OCTET STRING | accessible-for-notify | The value of the object svcTlsMrpAttrValue indicates the value of MRP attribute. |
| U32 svcTlsMrpFailedRegisterCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.73 | Unsigned32 | read-only | The value of the object svcTlsMrpFailedRegisterCount indicates number of failed MRP attribute registrations in this TLS. |
| U32 svcTlsMrpFloodTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.75 | Unsigned32 | read-write | The value of the object svcTlsMrpFloodTime specifies the amount of time in seconds after a status change in the TLS during which traffic is flooded. Once that time expires, traffic will be delivered according to the MRP registrations which exist in the TLS. The value of 0 indicates that no flooding will occur on state changes in the TLS. |
| U32 svcTlsMrpMaxAttributes | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.71 | Unsigned32 | read-write | The value of the object svcTlsMrpMaxAttributes indicates maximum number of MRP attributes supported in this TLS. In most cases the default value is 2048 MRP attributes. For some platform and chassis types, especially single slot chassises, the default value will be lower due to resource constraints. An inconsistentValue error is returned if an attempt is made to set this object to a value the platform cannot support. |
| U32 svcTlsPriPortsCumulativeFactor | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66 | Unsigned32 | read-write | The value of the object svcTlsPriPortsCumulativeFactor specifies a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature. An inconsistentValue error is returned if an attempt is made to set the value of svcTlsPriPortsCumulativeFactor to a value lower than or equal to svcTlsSecPortsCumulativeFactor. |
| T/F svcTlsPropagateMacFlush | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.69 | TruthValue | read-write | The value of svcTlsPropagateMacFlush specifies whether 'MAC flush' messages received from the given LDP are propagated to all spoke-SDPs and mesh-SDPs within the context of this VPLS service. The propagation will follow the 'split-horizon' principle and any data-path blocking in order to avoid the looping of these messages. The value of 'true' enables the propagation. |
| U32 svcTlsSecPortsCumulativeFactor | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.67 | Unsigned32 | read-write | The value of the object svcTlsSecPortsCumulativeFactor specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature. An inconsistentValue error is returned if an attempt is made to set the value of svcTlsSecPortsCumulativeFactor to a value greater than or equal to svcTlsPriPortsCumulativeFactor. |
| INT svcTlsShcvAction | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.62 | INTEGER | read-write | The value of the object svcTlsShcvAction indicates whether any action should be triggered when the connectivity check fails. |
| U32 svcTlsShcvInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.65 | Unsigned32 | read-write | The value of the object svcTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking. |
| IP svcTlsShcvSrcIp | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.63 | IpAddress | read-write | The value of the object svcTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified. |
| MAC svcTlsShcvSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.64 | MacAddress | read-write | The value of the object svcTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified. |
| TMN svcTlsStpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.8 | TmnxEnabledDisabled | read-write | The value of the object svcTlsStpAdminStatus specifies the administrative state of the Spanning Tree Protocol instance associated with this service. |
| MAC svcTlsStpBridgeAddress | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.10 | MacAddress | read-only | The value of the object svcTlsStpBridgeAddress indicates the MAC address used to identify this bridge in the network. It is used as the last six octets of the Bridge ID included in the Configuration BPDU's generated by this bridge. The most significant 38 bits of the bridge address are taken from the base MAC address of the device, while the least significant 10 bits are based on the corresponding TLS instance ID. |
| I32 svcTlsStpBridgeForwardDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.22 | Integer32 | read-write | The value of the object svcTlsStpBridgeForwardDelay specifies the value that all bridges should use for 'ForwardDelay' when this bridge is acting as the root bridge. |
| I32 svcTlsStpBridgeHelloTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.21 | Integer32 | read-write | The value of the object svcTlsStpBridgeHelloTime specifies the value that all bridges should use for 'HelloTime' when this bridge is acting as the root bridge. |
| I32 svcTlsStpBridgeInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.41 | Integer32 | read-only | The value of the object svcTlsStpBridgeInstanceId indicates a 12 bit value chosen by the the system. It is part of the STP bridge Id, which consists of 8 octets: - 4 highest bits of octet 1: the bridge priority (ref svcTlsStpPriority) - 12 bits (4 lowest bits of octet 1 + 8 bits of octet 2): bridge instance Id (this object!). - 6 octets: bridge MAC addess ref svcTlsStpBridgeAddress The value is set to 0 if svcTlsStpOperStatus is not 'up'. |
| I32 svcTlsStpBridgeMaxAge | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.20 | Integer32 | read-write | The value of the object svcTlsStpBridgeMaxAge specifies the value that all bridges should use for 'MaxAge' when this bridge is acting as the root bridge. |
| I32 svcTlsStpBridgeMaxHops | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.53 | Integer32 | read-write | The value of the object svcTlsStpBridgeMaxHops specifies the maximum number of hops (known as 'MaxHops' in 802.1Q). |
| I32 svcTlsStpCistIntRootCost | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.55 | Integer32 | read-only | The value of the object svcTlsStpCistIntRootCost indicates the cost of the path to the CIST regional root bridge as seen from this bridge. |
| BRI svcTlsStpCistRegionalRoot | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.54 | BridgeId | read-only | The value of the object svcTlsStpCistRegionalRoot indicates the bridge identifier of the regional root of the CIST spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as the CIST Regional Root Identifier parameter in all MSTP BPDUs originated by this node. |
| I32 svcTlsStpCistRegionalRootPort | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.57 | Integer32 | read-only | The value of the object svcTlsStpCistRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge. |
| I32 svcTlsStpCistRemainingHopCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.56 | Integer32 | read-only | The value of the object svcTlsStpCistRemainingHopCount specifies the remaining number of hops. |
| BRI svcTlsStpDesignatedRoot | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.13 | BridgeId | read-only | The value of the object svcTlsStpDesignatedRoot indicates the bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as the Root Identifier parameter in all Configuration BPDUs originated by this node. |
| I32 svcTlsStpForwardDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.19 | Integer32 | read-only | The value of the object svcTlsStpForwardDelay indicates how fast a port changes its state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used to age all dynamic entries in the Forwarding Database when a topology change has been detected and is underway. This is the actual value that this bridge is currently using. |
| I32 svcTlsStpHelloTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.17 | Integer32 | read-only | The value of the object svcTlsStpHelloTime indicates the amount of time between the transmission of Configuration BPDUs. This is the actual value that this bridge is currently using. |
| I32 svcTlsStpHoldCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.39 | Integer32 | read-write | The value of the object svcTlsStpHoldCount specifies the maximum number of BPDUs that are transmitted in any 'HelloTime' interval. The value used by the bridge to limit the maximum transmission rate of BPDUs. |
| I32 svcTlsStpHoldTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.18 | Integer32 | read-only | The value of the object svcTlsStpHoldTime indicates the interval length during which no more than two Configuration BPDUs shall be transmitted by this bridge. This object is no longer used. It is replaced by the object svcTlsStpHoldCount. This object was made obsolete in the 3.0 release. |
| I32 svcTlsStpMaxAge | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.16 | Integer32 | read-only | The value of the object svcTlsStpMaxAge indicates the maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded. This is the actual value that this bridge is currently using. |
| INT svcTlsStpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.30 | INTEGER | read-only | The value of the object svcTlsStpOperStatus indicates the operating status of the Spanning Tree Protocol instance associated with this service. |
| BRI svcTlsStpPrimaryBridge | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.40 | BridgeId | read-only | The value of the object svcTlsStpPrimaryBridge indicates the BridgeId of the bridge that acts as the primary bridge, being the gateway from the core mesh towards the root bridge. |
| I32 svcTlsStpPriority | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.9 | Integer32 | read-write | The value of the object svcTlsStpPriority specifies the priority of the Spanning Tree Protocol instance associated with this service. It is used as the highest 4 bits of the Bridge ID included in the Configuration BPDU's generated by this bridge. The svcTlsStpPriority can only take-on values which multiples of 4096 (4k). If a value is specified which is not a multiple of 4K, then this value will be replaced by the closest multiple of 4K which is lower then the value entered. |
| STR svcTlsStpRegionName | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.51 | DisplayString | read-write | The value of the object svcTlsStpRegionName specifies the MSTP region name. Together with region revision and VLAN-to-instance assignment it defines the MSTP region. |
| I32 svcTlsStpRegionRevision | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.52 | Integer32 | read-write | The value of the object svcTlsStpRegionRevision specifies the MSTP region revision number. Together with region name and VLAN-to-instance assignment it defines the MSTP region. |
| I32 svcTlsStpRootCost | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.14 | Integer32 | read-only | The value of the object svcTlsStpRootCost indicates the cost of the path to the root bridge as seen from this bridge. |
| I32 svcTlsStpRootPort | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.15 | Integer32 | read-only | The value of the object svcTlsStpRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| TIK svcTlsStpTimeSinceTopologyChange | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.11 | TimeTicks | read-only | The value of the object svcTlsStpTimeSinceTopologyChange indicates the time (in hundredths of a second) since the last time a topology change was detected by the Spanning Tree Protocol instance associated with this service. |
| T/F svcTlsStpTopologyChangeActive | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.33 | TruthValue | read-only | The value of the object svcTlsStpTopologyChangeActive indicates, when set to 'true', that a topology change is currently in progress. |
| I32 svcTlsStpTopologyChanges | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.12 | Integer32 | read-only | The value of the object svcTlsStpTopologyChanges indicates the total number of topology changes detected by the Spanning Tree Protocol instance associated with this service since the management entity was last reset or initialized. |
| STP svcTlsStpVcpOperProtocol | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.42 | StpProtocol | read-only | The value of the object svcTlsStpVcpOperProtocol indicates whether stp, rstp or mstp is running on this VCP. If the protocol is not enabled on this VCP, the value notApplicable is returned. |
| INT svcTlsStpVersion | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.38 | INTEGER | read-write | The value of the object svcTlsStpVersion specifies the version of Spanning Tree Protocol the bridge is currently running. The value 'rstp' corresponds to the Rapid Spanning Tree Protocol specified in IEEE 802.1D/D4-2003. The value 'compDot1w' corresponds to the mode where the Rapid Spanning Tree is backward compatible with IEEE 802.1w. The value 'dot1w' corresponds to the Rapid Spanning Tree Protocol fully conformant to IEEE 802.1w. The value 'mstp' corresponds to the Multiple Spanning Tree Protocol specified in IEEE 802.1Q-REV/D3.0-04/2005. The value 'pmstp' corresponds to Provider MSTP protocol compliant with IEEE-802.1ad-2005. New values may be defined as future versions of the protocol become available. |
| INT svcTlsStpVirtualRootBridgeStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.31 | INTEGER | read-only | The value of the object svcTlsStpVirtualRootBridgeStatus indicates the operating status of the Virtual Root Bridge of the Spanning Tree Protocol instance associated with this service. The status of the Virtual Root Bridge is 'up' when there is connectivity to the core: i.e. one or more SDP's in this service are operationally up. |
| VPN svcTlsVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.36 | VpnId | read-only | The value of the object svcTlsVpnId indicates the VPN ID of the associated TLS service. |
| U32 svcTotalFdbMimDestIdxEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.42 | Unsigned32 | read-only | The value of the object svcTotalFdbMimDestIdxEntries indicates the number of system wide Backbone MAC address indices in use. |
| svcTraps | 1.3.6.1.4.1.6527.3.1.3.4.2.0 | |||
| svcTrapsPrefix | 1.3.6.1.4.1.6527.3.1.3.4.2 | |||
| SER svcType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.3 | ServType | read-create | The value of the object svcType specifies the service type: e.g. epipe, tls, etc. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| T/F svcVcSwitching | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.23 | TruthValue | read-create | The value of the object svcVcSwitching specifies if the PW switching signalling is used for the Spokes configured under the service. This object can only be specified when the row is created. |
| INT svcVllType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.18 | INTEGER | read-create | The value of the object svcVllType specifies, for a apipe, fpipe or cpipe service, the type of pseudo-wire to be signalled for the service. The default for this object depends on the service type: 'atmSdu' for apipes, 'frDlci' for fpipes, satopE1 for cpipes, and 'undef' for all other service types. |
| INT svcVplsType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.26 | INTEGER | read-create | Backbone VPLS ('bVpls') refers to the B-Component instance of the Provider Backbone Bridging (PBB/IEEE 802.1ah) feature. It represents the Multi-point tunneling component that multiplexes multiple Customer VPNs (ISIDs) together. It is similar to a regular VPLS instance that operates on the Backbone MAC addresses. ISID VPLS ('iVpls') or I-VPLS refers to the I-Component instance of the Provider Backbone Bridging (PBB/IEEE 802.1ah) feature. It identifies the specific VPN entity associated to a customer Multipoint (ELAN) service. It is similar to a regular VPLS instance that operates on the Customer MAC addresses. The value of the object svcVplsType specifies the VPLS service type. The value of this object must be specified when the row is created and cannot be changed while the svcRowStatus is 'active'. |
| VPN svcVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.14 | VpnId | read-create | The value of the object svcVpnId specifies the VPN ID assigned to this service. The value of this object can be specified only when the row is created. If the value is not specified, it defaults to the service ID. |
| TMN svcVRouterId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.15 | TmnxVRtrIDOrZero | read-create | The value of the object svcVRouterId specifies, for a IES or VPRN service the associated virtual router instance where its interfaces are defined. This object has a special significance for the VPRN service as it can be used to associate the service to a specific virtual router instance. If no routing instance is specified or a value of zero (0) is specified, the agent will assign the vRtrID index value that would have been returned by the vRtrNextVRtrID object in the ALCATEL-IND1-TIMETRA-VRTR-MIB. The agent supports an SNMP SET operation to the svcVRouterId object only during row creation. |
| TMN svcWholesalerID | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.1 | TmnxServId | not-accessible | The value of svcWholesalerID is used to specify the service ID of the wholesaler. |
| svcWholesalerInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1 | not-accessible | Each row entry represents the attributes of a wholesaler-retailer pairing. Entries are created/destroyed when forwarding interfaces are defined. | |
| svcWholesalerInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.24 | not-accessible | The svcWholesalerInfoTable has an entry for each wholesaler service associated with a retailer service on this system. | |
| U32 svcWholesalerNumDynamicHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.3 | Unsigned32 | read-only | The value of svcWholesalerNumDynamicHosts indicates the number of dynamic hosts in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| U32 svcWholesalerNumStaticHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.2 | Unsigned32 | read-only | The value of svcWholesalerNumStaticHosts indicates the number of static hosts in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| timetraServicesMIBModule | 1.3.6.1.4.1.6527.1.1.3.4 | This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| I32 tlsDHCPClientLease | 1.3.6.1.4.1.6527.3.1.2.4.6.6 | Integer32 | accessible-for-notify | The value of the object tlsDHCPClientLease indicates the lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time. This object was made obsolete in the 4.0 release. |
| MAC tlsDhcpLseStateNewChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.10 | MacAddress | accessible-for-notify | The value of the object tlsDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap. This object was made obsolete in the 4.0 release. |
| IP tlsDhcpLseStateNewCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.9 | IpAddress | accessible-for-notify | The value of the object tlsDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap. This object was made obsolete in the 4.0 release. |
| MAC tlsDhcpLseStateOldChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.8 | MacAddress | accessible-for-notify | The value of the object tlsDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state. Used in sapTlsDHCPLeaseStateOverride trap. This object was made obsolete in the 4.0 release. |
| IP tlsDhcpLseStateOldCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.7 | IpAddress | accessible-for-notify | The value of the object tlsDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state. Used in sapTlsDHCPLeaseStateOverride trap. This object was made obsolete in the 4.0 release. |
| STR tlsDhcpLseStatePopulateError | 1.3.6.1.4.1.6527.3.1.2.4.6.17 | DisplayString | accessible-for-notify | The value of the object tlsDhcpLseStatePopulateError indicates why the system was unable to update the Lease State Table upon reception of a DHCP ACK message. This object was made obsolete in the 4.0 release. |
| STR tlsDhcpPacketProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.16 | DisplayString | accessible-for-notify | The value of the object tlsDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system. This object was made obsolete in the 4.0 release. |
| IP tlsDhcpRestoreLseStateCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.11 | IpAddress | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| TMN tlsDhcpRestoreLseStateEncapVal | 1.3.6.1.4.1.6527.3.1.2.4.6.14 | TmnxEncapVal | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateEncapVal indicates the SAP encap value specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| TMN tlsDhcpRestoreLseStatePortId | 1.3.6.1.4.1.6527.3.1.2.4.6.13 | TmnxPortID | accessible-for-notify | The value of the object tlsDhcpRestoreLseStatePortId indicates the Port ID specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| STR tlsDhcpRestoreLseStateProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.15 | DisplayString | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateProblem indicates why the persistency record cannot be restored. This object was made obsolete in the 4.0 release. |
| TMN tlsDhcpRestoreLseStateSvcId | 1.3.6.1.4.1.6527.3.1.2.4.6.12 | TmnxServId | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateSvcId indicates the serviceId specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| tlsEgressMulticastGroupEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1 | not-accessible | An entry containing management information applicable to a particular VPLS Egress Multicast Group. | |
| tlsEgressMulticastGroupTable | 1.3.6.1.4.1.6527.3.1.2.4.2.14 | not-accessible | This table is used to manage VPLS Egress Multicast Groups. These groups are used to group together VPLS SAP's in order to improve the efficiency of the egress multicast replication process. | |
| U32 tlsEgrMcGrpAdminQinqFixedTagVal | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.13 | Unsigned32 | read-create | The value of tlsEgrMcGrpAdminQinqFixedTagVal specifies the provisioned common value of the fixed 802.1Q tag of all the 'QinQ' SAP's in this Egress Multicast Group. The value 0 is used to indicate that the actual value of the fixed tag will be defined implicitly by the corresponding tag of the first SAP added to this Egress Multicast Group. |
| U32 tlsEgrMcGrpChainLimit | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.5 | Unsigned32 | read-create | The value of tlsEgrMcGrpChainLimit specifies the maximum number of SAP's that can be placed together in a single chain on this Egress Multicast Group. |
| SER tlsEgrMcGrpDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.4 | ServObjDesc | read-create | Generic information about this Egress Multicast Group. |
| U32 tlsEgrMcGrpDot1qEtherType | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.7 | Unsigned32 | read-create | The value of tlsEgrMcGrpDot1qEtherType specifies the common ethertype value used by all the 802.1Q SAP's on this Egress Multicast Group. |
| INT tlsEgrMcGrpEncapType | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.6 | INTEGER | read-create | The value of tlsEgrMcGrpEncapType specifies the common service encapsulation type used by all the SAP's on this Egress Multicast Group. |
| TFI tlsEgrMcGrpIpFilterId | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.9 | TFilterID | read-create | The value of tlsEgrMcGrpIpFilterId specifies the common egress IP filter ID used by all the SAP's on this Egress Multicast Group. |
| TFI tlsEgrMcGrpIpv6FilterId | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.10 | TFilterID | read-create | The value of tlsEgrMcGrpIpv6FilterId specifies the common egress IPv6 filter ID used by all the SAP's on this Egress Multicast Group. |
| TIM tlsEgrMcGrpLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.3 | TimeStamp | read-only | The value of tlsEgrMcGrpLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| TFI tlsEgrMcGrpMacFilterId | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.8 | TFilterID | read-create | The value of tlsEgrMcGrpMacFilterId specifies the common egress MAC filter ID used by all the SAP's on this Egress Multicast Group. |
| TNA tlsEgrMcGrpName | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.1 | TNamedItem | not-accessible | The value of tlsEgrMcGrpName indicates the name of the Egress Multicast Group. |
| U32 tlsEgrMcGrpOperQinqFixedTagVal | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.14 | Unsigned32 | read-only | The value of tlsEgrMcGrpOperQinqFixedTagVal specifies the operating common value of the fixed 802.1Q tag of all the 'QinQ' SAP's in this Egress Multicast Group. |
| U32 tlsEgrMcGrpQinqEtherType | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.11 | Unsigned32 | read-create | The value of tlsEgrMcGrpQinqEtherType specifies the common ethertype value used by all the 'QinQ' SAP's in this Egress Multicast Group. |
| INT tlsEgrMcGrpQinqFixedTagPosition | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.12 | INTEGER | read-create | The value of tlsEgrMcGrpQinqFixedTagPosition specifies the common position of the fixed 802.1Q tag of all the 'QinQ' SAP's in this Egress Multicast Group. This object has no meaning when the value of tlsEgrMcGrpEncapType is not 'qinqEncap'. |
| ROW tlsEgrMcGrpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.2 | RowStatus | read-create | The value of tlsEgrMcGrpRowStatus controls the creation and deletion of rows in this table. |
| MAC tlsFdbBackboneDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.13 | MacAddress | read-only | The value of the object tlsFdbBackboneDstMac indicates the Backbone VPLS service MAC address used as destination MAC address in the Provider Backbone Bridging frames for this tlsFdbMacAddr. This object is insignificant for services with svcVplsType not set to 'iVpls' and should contain a value of 0:0:0:0:0:0. |
| TMN tlsFdbCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.10 | TmnxCustId | read-only | The value of the object tlsFdbCustId indicates the Customer ID of the associated TLS. |
| TMN tlsFdbEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.6 | TmnxEncapVal | read-create | The value of the object tlsFdbEncapValue specifies, when the value of tlsFdbLocale is 'sap', along with tlsFdbPortId, SAP associated with the MAC address defined by tlsFdbMacAddr. This object is otherwise insignificant and should contain a value of 0. |
| TNA tlsFdbEndPointName | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.15 | TNamedItemOrEmpty | read-create | The value of tlsFdbEndPointName specifies the name of the service endpoint associated with the MAC Address. |
| SDP tlsFdbEPMacOperSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.16 | SdpId | read-only | The value of the object tlsFdbEPMacOperSdpId along with tlsFdbEPMacOperVcId indicates the SDP binding associated with this static MAC address for this endpoint. This object is valid when tlsFdbLocale is 'endpoint', otherwise it should contain a value of 0. |
| U32 tlsFdbEPMacOperVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.17 | Unsigned32 | read-only | The value of the object tlsFdbEPMacOperVcId along with tlsFdbEPMacOperSdpId indicates the SDP binding associated with this static MAC address for this endpoint. This object is valid when tlsFdbLocale is 'endpoint', otherwise it should contain a value of 0. |
| tlsFdbInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1 | not-accessible | Information about a specific TLS FDB. | |
| tlsFdbInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.4 | not-accessible | A table that contains TLS FDB information. | |
| TIM tlsFdbLastStateChange | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.11 | TimeStamp | read-only | The value of the object tlsFdbLastStateChange indicates the value of sysUpTime at the time of the most recent state change of this entry. A state change is defined as a change in the value of: tlsFdbRowStatus, tlsFdbType, tlsFdbLocale, tlsFdbPortId, tlsFdbEncapValue, tlsFdbSdpId or tlsFdbVcId. |
| INT tlsFdbLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.4 | INTEGER | read-create | The value of the object tlsFdbLocale specifies for TLS FDB entries defined on a local SAP the value 'sap', remote entries defined on an SDP have the value 'sdp', entries associated with the Control Processor have the value 'cpm' and entries associated with the explicit endpoint have the value 'endpoint'. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| MAC tlsFdbMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.1 | MacAddress | read-only | The value of the object tlsFdbMacAddr specifies the 48-bit IEEE 802.3 MAC address. |
| U32 tlsFdbNumIVplsMac | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.14 | Unsigned32 | read-only | The value of the object tlsFdbNumIVplsMac indicates the number of ISID VPLS service MAC addressess which are using this Backbone MAC address defined by tlsFdbMacAddr. This object is insignificant for services with svcVplsType not set to 'bVpls' and should contain a value of 0. |
| U32 tlsFdbPbbNumEpipes | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.18 | Unsigned32 | read-only | The value of the object tlsFdbPbbNumEpipes indicates number of E-Pipes that resolve to this MAC Address. This object is valid for service with svcVplsType set to 'bVpls', otherwise it should contain a value of 0. |
| TMN tlsFdbPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.5 | TmnxPortID | read-create | When the value of tlsFdbLocale is 'sap', this object, along with tlsFdbEncapValue, specifies the SAP associated with the MAC address defined by tlsFdbMacAddr. This object is otherwise insignificant and should contain a value of 0. |
| T/F tlsFdbProtected | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.12 | TruthValue | read-only | The value of the object tlsFdbProtected indicates whether or not this MAC is protected. When the value of this object is 'true' the agent will protect the MAC from being learned or re-learned on a SAP that has restricted learning enabled. |
| ROW tlsFdbRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.2 | RowStatus | read-create | The value of the object tlsFdbRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. |
| SDP tlsFdbSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.7 | SdpId | read-create | The value of the object tlsFdbSdpId specifies, when the value of tlsFdbLocale is 'sdp', along with tlsFdbVcId,the SDP Binding associated with the MAC address defined by tlsFdbMacAddr. This object is other- wise insignificant and should contain a value of 0. |
| INT tlsFdbType | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.3 | INTEGER | read-create | The value of the object tlsFdbType specifies: - 'static': Static TLS FDB entries created via management - 'learned': dynamic entries created via the learning process - 'oam': entries created via the OAM process - 'dhcp': learned addresses can be temporarily frozen by the DHCP snooping application for the duration of a DHCP lease - 'host': entry added by the system for a static configured subscriber host. |
| U32 tlsFdbVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.8 | Unsigned32 | read-create | The value of the object tlsFdbVcId specifies, when the value of tlsFdbLocale is 'sdp', along with tlsFdbSdpId, the SDP Binding associated with the MAC address defined by tlsFdbMacAddr. This object is other-wise insignificant and should contain a value of 0. |
| VPN tlsFdbVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.9 | VpnId | read-only | The value of the object tlsFdbVpnId indicates the VPN ID of the associated TLS. |
| TMN tlsMFibEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.9 | TmnxEncapVal | not-accessible | The value of tlsMFibEncapValue indicates, together with the object tlsMFibPortId, the SAP for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sap'. Otherwise it contains the value 0. |
| tlsMFibEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1 | not-accessible | An entry in the tlsMFibTable. Each entry indicates whether traffic from a certain source to a certain multicast destination (group) needs to be forwarded or blocked on the indicated SAP/SDP. | |
| INT tlsMFibEntryType | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.1 | INTEGER | not-accessible | The value of the object tlsMFibEntryType indicates the type of this tlsMFibEntry. - macBased: entry used for macBased multicast, as for MLD-snooping and 802.1ak MMRP. - ipBased: entry used for ip_based multicast, as for IGMP-snooping and PIM-snooping. |
| MFI tlsMFibFwdOrBlk | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.12 | MfibGrpSrcFwdOrBlk | read-only | The value of tlsMFibFwdOrBlk indicates if traffic for the indicated (S,G) pair will be blocked or forwarded on the indicated SAP or SDP. |
| IP tlsMFibGrpInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.4 | InetAddress | not-accessible | The value of the object tlsMFibGrpInetAddr indicates the multicast destination IP address for which this table entry contains information. |
| IPt tlsMFibGrpInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.3 | InetAddressType | not-accessible | The value of the object tlsMFibGrpInetAddrType indicates the type of tlsMFibGrpInetAddr. |
| MAC tlsMFibGrpMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.2 | MacAddress | not-accessible | The value of the object tlsMFibGrpMacAddr indicates the MAC address for which this table entry contains information. This value is only meaningful if the value of tlsMFibEntryType is 'macBased (2)'. |
| tlsMFibGrpSrcStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1 | not-accessible | An entry in the tlsMFibGrpSrcStatsTable. | |
| C64 tlsMFibGrpSrcStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.4 | Counter64 | read-only | tlsMFibGrpSrcStatsForwardedOctets indicates the number of octets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| C64 tlsMFibGrpSrcStatsForwardedPkts | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.3 | Counter64 | read-only | tlsMFibGrpSrcStatsForwardedPkts indicates the number of IPv4 multicast packets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| IP tlsMFibGrpSrcStatsGrpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.1 | IpAddress | not-accessible | tlsMFibGrpSrcStatsGrpAddr indicates the IPv4 multicast destination address for which this table entry contains information. |
| IP tlsMFibGrpSrcStatsSrcAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.2 | IpAddress | not-accessible | tlsMFibGrpSrcStatsSrcAddr indicates the IPv4 unicast source address for which this table entry contains information. |
| tlsMFibGrpSrcStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.9 | not-accessible | tlsMFibGrpSrcStatsTable contains statistics for the entries in the IPv4 Multicast FIB for this Tls. These statistics are collected by the forwarding engine. This table was made obsolete in the 6.0 release. It is replaced by tlsMFibStatsTable. | |
| TMN tlsMFibInfoEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.5 | TmnxEncapVal | not-accessible | When the value of tlsMFibInfoLocale is 'sap', the object tlsMFibInfoEncapValue, along with the object tlsMFibInfoPortId, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| tlsMFibInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1 | not-accessible | An entry in the tlsMFibInfoTable. Each entry indicates whether traffic from a certain source to a certain multicast destination (group) needs to be forwarded or blocked on the indicated SAP/SDP. | |
| MFI tlsMFibInfoFwdOrBlk | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.8 | MfibGrpSrcFwdOrBlk | read-only | tlsMFibInfoFwdOrBlk indicates if traffic for the indicated (S,G) pair will be blocked or forwarded on the indicated SAP or SDP. |
| IP tlsMFibInfoGrpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.1 | IpAddress | not-accessible | The value of the object tlsMFibInfoGrpAddr indicates the IPv4 multicast destination address for which this table entry contains information. |
| MFI tlsMFibInfoLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.3 | MfibLocation | not-accessible | tlsMFibInfoLocale indicates if the information in this entry pertains to a 'sap' or to an 'sdp'. |
| TMN tlsMFibInfoPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.4 | TmnxPortID | not-accessible | When the value of tlsMFibInfoLocale is 'sap', the object tlsMFibInfoPortId along with the object tlsMFibInfoEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| SDP tlsMFibInfoSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.6 | SdpId | not-accessible | When the value of tlsMFibInfoLocale is 'sdp', the object tlsMFibInfoSdpId, along with tlsMFibInfoVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP tlsMFibInfoSrcAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.2 | IpAddress | not-accessible | tlsMFibInfoSrcAddr indicates the IPv4 unicast source address for which this table entry contains information. |
| TMN tlsMFibInfoSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.9 | TmnxServId | read-only | tlsMFibInfoSvcId indicates the TLS service to which the indicated SAP or SDP belongs. |
| tlsMFibInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.8 | not-accessible | tlsMFibInfoTable contains the IPv4 Multicast FIB for this Tls. This table was made obsolete in the 6.0 release. It is replaced by tlsMFibTable. | |
| U32 tlsMFibInfoVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.7 | Unsigned32 | not-accessible | When the value of tlsMFibInfoLocale is 'sdp', the object tlsMFibInfoVcId, along with tlsMFibInfoSdpId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| MFI tlsMFibLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.7 | MfibLocation | not-accessible | The value of tlsMFibLocale indicates if the information in this entry pertains to a 'sap' or to an 'sdp'. |
| TMN tlsMFibPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.8 | TmnxPortID | not-accessible | The value of tlsMFibPortId indicates, together with the object tlsMFibEncapValue, the SAP for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sap'. Otherwise it contains the value 0. |
| SDP tlsMFibSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.10 | SdpId | not-accessible | The value of tlsMFibSdpId indicates, together with the object tlsMFibVcId, the SDP Binding for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sdp'. Otherwise it contains the value 0. |
| IP tlsMFibSrcInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.6 | InetAddress | not-accessible | The value of tlsMFibSrcInetAddr indicates the unicast source IP address for which this table entry contains information. |
| IPt tlsMFibSrcInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.5 | InetAddressType | not-accessible | The value of tlsMFibSrcInetAddrType indicates the type of tlsMFibSrcInetAddr. |
| tlsMFibStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1 | not-accessible | An entry in the tlsMFibStatsTable. | |
| INT tlsMFibStatsEntryType | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.1 | INTEGER | not-accessible | The value of the object tlsMFibStatsEntryType indicates the type of this tlsMFibStatsEntry. - macBased: entry used for macBased multicast, as for MLD-snooping and 802.1ak MMRP. - ipBased: entry used for ip_based multicast, as for IGMP-snooping and PIM-snooping. |
| C64 tlsMFibStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.8 | Counter64 | read-only | The value of tlsMFibStatsForwardedOctets indicates the number of octets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| C64 tlsMFibStatsForwardedPkts | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.7 | Counter64 | read-only | The value of tlsMFibStatsForwardedPkts indicates the number of multicast packets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| IP tlsMFibStatsGrpInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.4 | InetAddress | not-accessible | The value of tlsMFibStatsGrpInetAddr indicates the multicast destination IP address for which this table entry contains information. |
| IPt tlsMFibStatsGrpInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.3 | InetAddressType | not-accessible | The value of tlsMFibStatsGrpInetAddrType indicates the type of tlsMFibStatsGrpInetAddr. |
| MAC tlsMFibStatsGrpMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.2 | MacAddress | not-accessible | The value of tlsMFibStatsGrpMacAddr indicates the MAC address for which this table entry contains information. This value is only meaningful if the value of tlsMFibStatsEntryType is 'macBased (2)'. |
| IP tlsMFibStatsSrcInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.6 | InetAddress | not-accessible | The value of tlsMFibStatsSrcInetAddr indicates the unicast source IP address for which this table entry contains information. |
| IPt tlsMFibStatsSrcInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.5 | InetAddressType | not-accessible | The value of tlsMFibStatsSrcInetAddrType indicates the type of tlsMFibStatsSrcInetAddr. |
| tlsMFibStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.29 | not-accessible | tlsMFibStatsTable contains statistics for the entries in the IPv4 Multicast FIB for this Tls. These statistics are collected by the forwarding engine. | |
| TMN tlsMFibSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.13 | TmnxServId | read-only | The value of tlsMFibSvcId indicates the TLS service to which the indicated SAP or SDP belongs. |
| tlsMFibTable | 1.3.6.1.4.1.6527.3.1.2.4.2.28 | not-accessible | tlsMFibTable contains the Multicast FIB for this Tls. | |
| U32 tlsMFibVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.11 | Unsigned32 | not-accessible | The value of tlsMFibVcId indicates, together with the object tlsMFibSdpId, the SDP Binding for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sdp'. Otherwise it contains the value 0. |
| tlsMstiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1 | not-accessible | Information about a specific MSTI. | |
| MST tlsMstiInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.1 | MstiInstanceId | not-accessible | The value of the object tlsMstiInstanceId specifies the Multiple Spanning Tree Instance. |
| I32 tlsMstiIntRootCost | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.6 | Integer32 | read-only | The value of the object tlsMstiIntRootCost indicates the cost of the path to the regional root bridge as seen from this bridge. |
| TIM tlsMstiLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.4 | TimeStamp | read-only | The value of the object tlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this MSTI. |
| tlsMstiManagedVlanListEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1 | not-accessible | Each row specifies a range of VLANS associated with a SAP of a MVPLS. Ranges may contains overlapping sections only for Mvpls SAPs that belong to the same service. | |
| tlsMstiManagedVlanListTable | 1.3.6.1.4.1.6527.3.1.2.4.2.13 | not-accessible | This table is used only for a management VPLS when MSTP is running. It indicates for each multiple spanning tree instance the ranges of associated VLANs that will be affected when a certain SAP changes state. | |
| QTA tlsMstiMvplsMaxVlanTag | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1.2 | QTag | not-accessible | The value of tlsMstiMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP. |
| QTA tlsMstiMvplsMinVlanTag | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1.1 | QTag | not-accessible | The value of tlsMstiMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. tlsMstiMvplsMinVlanTag must be smaller than (or equal to) tlsMstiMvplsMaxVlanTag. |
| ROW tlsMstiMvplsRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1.3 | RowStatus | read-create | The value of tlsMstiMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'active', 'createAndGo' and 'destroy'. |
| I32 tlsMstiPriority | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.3 | Integer32 | read-create | The value of the object tlsMstiPriority specifies the priority of this spcecific Multiple Spanning Tree Instance for this service. It is used as the highest 4 bits of the Bridge ID included in the MSTP BPDU's generated by this bridge. The tlsMstiPriority can only take-on values which multiples of 4096 (4k). If a value is specified which is not a multiple of 4K, then this value will be replaced by the closest multiple of 4K which is lower then the value entered. |
| BRI tlsMstiRegionalRoot | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.5 | BridgeId | read-only | The value of the object tlsMstiRegionalRoot indicates the bridge identifier of the regional root of the MSTI spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as the CIST Regional Root Identifier parameter in all MSTP BPDUs originated by this node. |
| I32 tlsMstiRegionalRootPort | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.8 | Integer32 | read-only | The value of the object tlsMstiRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge. |
| I32 tlsMstiRemainingHopCount | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.7 | Integer32 | read-only | The value of the object tlsMstiRemainingHopCount specifies the remaining number of hops. |
| ROW tlsMstiRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.2 | RowStatus | read-create | The value of the object tlsMstiRowStatus specifies the status of this row. The only values supported during a set operation are 'active', 'createAndGo' and 'destroy'. |
| tlsMstiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.12 | not-accessible | A table that contains Multiple Spanning Tree Instance (MSTI) information. Each management VPLS running MSTP can have upto 15 MSTI, not including the CIST. | |
| tlsPipInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1 | not-accessible | TLS specific information about PIP uplink. | |
| tlsPipInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.40 | not-accessible | A table that contains TLS PIP (Provider Internal Port) uplink information. PIP is the virtual link between I and B components of PBB (Provider Backbone Bridging) model. I component refers to a service with svcVplsType set to 'iVpls (3)' and B component refers to a service with svcVplsType set to 'bVpls (2)'. When any form of STP is enabled in the iVpls domain, the PIP uplink is modeled as a regular STP port. | |
| BRI tlsPipMstiDesignatedBridge | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.3 | BridgeId | read-only | The value of the object tlsPipMstiDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment for this MSTI. |
| I32 tlsPipMstiDesignatedPort | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.4 | Integer32 | read-only | The value of the object tlsPipMstiDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment for this MSTI. |
| tlsPipMstiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1 | not-accessible | Information about a specific MSTI for a PIP uplink. | |
| STP tlsPipMstiPortRole | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.1 | StpPortRole | read-only | tlsPipMstiPortRole indicates the current role of the PIP uplink in the MSTI as defined by the Spanning Tree Protocol. |
| TST tlsPipMstiPortState | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.2 | TStpPortState | read-only | The value of the object tlsPipMstiPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. |
| tlsPipMstiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.41 | not-accessible | This table contains Multiple Spanning Tree Instance information for the PIP uplink. Each management VPLS running MSTP can have upto 15 MSTI. An entry in this table is automatically created when a tlsMstiEntry is created. | |
| BRI tlsPipStpDesignatedBridge | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.3 | BridgeId | read-only | The value of tlsPipStpDesignatedBridge indicates the Bridge Identifier of the bridge which this PIP uplink considers to be the Designated Bridge for this port's segment. |
| I32 tlsPipStpDesignatedPort | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.4 | Integer32 | read-only | The value of tlsPipStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment. |
| STP tlsPipStpException | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.5 | StpExceptionCondition | read-only | The value of the object tlsPipStpException indicates whether an STP exception condition is present on this Pip. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link. |
| C32 tlsPipStpForwardTransitions | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.6 | Counter32 | read-only | The value of the object tlsPipStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state. |
| C32 tlsPipStpInBadBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.11 | Counter32 | read-only | This object specifies the number of bad BPDUs received on this PIP uplink. |
| C32 tlsPipStpInConfigBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.7 | Counter32 | read-only | The value of the object tlsPipStpInConfigBpdus indicates the number of Configuration BPDUs received on this PIP uplink. |
| C32 tlsPipStpInMstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.10 | Counter32 | read-only | The value of the object tlsPipStpInMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs received on this PIP uplink. |
| C32 tlsPipStpInRstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.9 | Counter32 | read-only | The value of the object tlsPipStpInRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs received on this PIP uplink. |
| C32 tlsPipStpInTcnBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.8 | Counter32 | read-only | The value of the object tlsPipStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this PIP uplink. |
| MVP tlsPipStpMvplsPruneState | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.17 | MvplsPruneState | read-only | The value of tlsPipStpMvplsPruneState indicates the mVPLS prune state of this PIP uplink. The state reflects whether or not this uplink is pruned by the STP instance running in the mVPLS instance. |
| STP tlsPipStpOperProtocol | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.18 | StpProtocol | read-only | The value of tlsPipStpOperProtocol indicates whether 'stp', 'rstp' or 'mstp' is running on this PIP uplink. If the protocol is not enabled on this PIP uplink, the value 'notApplicable' is returned. |
| SER tlsPipStpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.16 | ServiceOperStatus | read-only | The value of the object tlsPipStpOperStatus indicates the operational status of this PIP uplink. |
| C32 tlsPipStpOutConfigBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.12 | Counter32 | read-only | The value of the object tlsPipStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this PIP uplink. |
| C32 tlsPipStpOutMstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.15 | Counter32 | read-only | The value of the object tlsPipStpOutMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs sent out on this PIP uplink. |
| C32 tlsPipStpOutRstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.14 | Counter32 | read-only | The value of the object tlsPipStpOutRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs sent out on this PIP uplink. |
| C32 tlsPipStpOutTcnBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.13 | Counter32 | read-only | This object specifies the number of Topology Change Notification BPDUs sent out this PIP uplink. |
| U32 tlsPipStpPortNum | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.19 | Unsigned32 | read-only | The value of the object tlsPipStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this PIP uplink. |
| STP tlsPipStpPortRole | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.2 | StpPortRole | read-only | The value of tlsPipStpPortRole indicates the current role of the PIP uplink as defined by the Rapid Spanning Tree Protocol. |
| TST tlsPipStpPortState | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.1 | TStpPortState | read-only | The value of tlsPipStpPortState indicates the PIP uplink's current state as defined by application of the Spanning Tree Protocol. This state controls what action PIP uplink takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken (6)' state. |
| tlsProtectedMacEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1 | not-accessible | An entry containing management information applicable to a particular protected MAC address. | |
| tlsProtectedMacTable | 1.3.6.1.4.1.6527.3.1.2.4.2.17 | not-accessible | This table is used to manage protected MAC addresses within a VPLS's FDB. | |
| MAC tlsProtMacAddress | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1.1 | MacAddress | not-accessible | The value of tlsProtMacAddress indicates the address of the protected MAC. |
| TIM tlsProtMacLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1.3 | TimeStamp | read-only | The value of tlsProtMacLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| ROW tlsProtMacRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1.2 | RowStatus | read-create | The value of tlsProtMacRowStatus controls the creation and deletion of rows in this table. |
| SER tlsRdntGrpDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.3 | ServObjDesc | read-create | The value of the object tlsRdntGrpDescription specifies generic information about this redundant group. |
| tlsRdntGrpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1 | not-accessible | Redundant Group information | |
| TIM tlsRdntGrpLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.4 | TimeStamp | read-only | The value of the object tlsRdntGrpLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this redundant group. |
| TMN tlsRdntGrpMemberEncap | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.5 | TmnxEncapVal | not-accessible | When the value of tlsRdntGrpMemberIsSap is 'sap', the value of the object tlsRdntGrpMemberEncap, along with tlsRdntGrpMemberPort, specifies a SAP. This object is otherwise insignificant and should contain a value of 0. |
| tlsRdntGrpMemberEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1 | not-accessible | Redundant Group Member information. | |
| T/F tlsRdntGrpMemberIsSap | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.3 | TruthValue | not-accessible | The value of the object tlsRdntGrpMemberIsSap specifies whether the Port ID and Encap describe a sap or a port (in which case Encap has no meaning). |
| TIM tlsRdntGrpMemberLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.7 | TimeStamp | read-only | The value of the object tlsRdntGrpMemberLastMgmtChange indicates the time of the most recent management-initiated change to this redundant group member. |
| TMN tlsRdntGrpMemberPort | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.4 | TmnxPortID | not-accessible | When the value of tlsRdntGrpMemberIsSap is 'sap', the value of the object tlsRdntGrpMemberPort, along with tlsRdntGrpMemberEncap, specifies a SAP, otherwise a port (in which case tlsRdntGrpMemberEncap is insignificant). |
| IP tlsRdntGrpMemberRemoteNodeAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.2 | InetAddress | not-accessible | The value of the object tlsRdntGrpMemberRemoteNodeAddr specifies the ip address of the remote ldp peer. |
| IPt tlsRdntGrpMemberRemoteNodeAddrTp | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.1 | InetAddressType | not-accessible | The value of the object tlsRdntGrpMemberRemoteNodeAddrTp specifies the addresstype of the remote ldp peer. |
| ROW tlsRdntGrpMemberRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.6 | RowStatus | read-create | The value of the object tlsRdntGrpMemberRowStatus specifies the status of this row. The only values supported are 'active', 'createAndGo' and 'destroy'. |
| tlsRdntGrpMemberTable | 1.3.6.1.4.1.6527.3.1.2.4.2.11 | not-accessible | A table that holds information about the members of TLS redundant groups. | |
| TNA tlsRdntGrpName | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.1 | TNamedItem | not-accessible | The value of the object tlsRdntGrpName specifies the name of the redundant group. The name must be unique within a TLS, however the same name can appear in different TLS services, in which case they denote different redundant groups. |
| ROW tlsRdntGrpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.2 | RowStatus | read-create | The value of the object tlsRdntGrpRowStatus specifies the status of this row. The only values supported are 'active', 'createAndGo' and 'destroy'. |
| tlsRdntGrpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.10 | not-accessible | A table that contains TLS service Redundant Group information. There is no limit on the number of Redundant Groups that can be created globally or within a service. | |
| L2R tlsShgCreationOrigin | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.11 | L2RouteOrigin | read-only | The value of tlsShgCreationOrigin indicates the protocol or mechanism which created this SHG. |
| TMN tlsShgCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.3 | TmnxCustId | read-only | The value of the object tlsShgCustId indicates the Customer ID of the associated TLS service. |
| SER tlsShgDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.5 | ServObjDesc | read-create | The value of the object tlsShgDescription specifies generic information about this split-horizon group. |
| tlsShgInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1 | not-accessible | Split-horizon group information about a TLS service. | |
| tlsShgInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.6 | not-accessible | A table that contains TLS service split-horizon group information. A maximum of 30 split-horizon groups can be created in a given TLS service. Maximum is set to 15 for a TLS service with svcVplsType set to 'bVpls', or 'iVpls'. | |
| U32 tlsShgInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.4 | Unsigned32 | read-only | The value of the object tlsShgInstanceId indicates the instance identifier for the split horizon group. |
| TIM tlsShgLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.6 | TimeStamp | read-only | The value of the object tlsShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group. |
| TNA tlsShgName | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.1 | TNamedItem | not-accessible | The value of the object tlsShgName specifies the name of the split-horizon group. The name must be unique within a TLS, however the same name can appear in different TLS services, in which case they denote different split-horizon groups. |
| T/F tlsShgResidential | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.7 | TruthValue | read-create | The value of the object tlsShgResidential specifies whether or not the split-horizon-group is residential.In a Residential Split Horizon Group (RSHG) there is no downstream broadcast, and all saps in the group will share the default ingress queue. The value can be specified during row-creation, cannot be changed later on. |
| T/F tlsShgRestProtSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.8 | TruthValue | read-create | The value of the object tlsShgRestProtSrcMac indicates how the agent will handle relearn requests for protected MAC addresses received on SAP's belonging to this SHG. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of tlsShgRestProtSrcMacAction is 'disable', then the SAP where the protected source MAC was seen will be brought operationally down. |
| INT tlsShgRestProtSrcMacAction | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.10 | INTEGER | read-create | The value of the object tlsShgRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP belonging to this SHG. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SAP will be left up and only a notification, sapReceivedProtSrcMac, will be generated. |
| T/F tlsShgRestUnprotDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.9 | TruthValue | read-create | The value of the object tlsShgRestUnprotDstMac indicates how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped. |
| ROW tlsShgRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.2 | RowStatus | read-create | The value of the object tlsShgRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, there should be no TLS SAP's or TLS spoke SDP Bindings refering to it. |
| tmnxApipeV3v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.119 | The group of objects supporting management of APIPE services on Alcatel 7x50 SR series systems release 3.0. | ||
| tmnxCustCompliance | 1.3.6.1.4.1.6527.3.1.1.4.1.1.100 | The compliance statement for management of services customers on Alcatel 7x50 SR series systems. | ||
| tmnxCustCompliances | 1.3.6.1.4.1.6527.3.1.1.4.1.1 | |||
| tmnxCustConformance | 1.3.6.1.4.1.6527.3.1.1.4.1 | |||
| tmnxCustGroups | 1.3.6.1.4.1.6527.3.1.1.4.1.2 | |||
| tmnxCustObjs | 1.3.6.1.4.1.6527.3.1.2.4.1 | |||
| BRI tmnxCustomerBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.5.1 | BridgeId | accessible-for-notify | tmnxCustomerBridgeId specifies the bridge identifier of the customer's device |
| BRI tmnxCustomerRootBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.5.2 | BridgeId | accessible-for-notify | tmnxCustomerRootBridgeId specifies the bridge identifier of the customer's designated root. |
| tmnxCustV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.1.2.100 | The group of objects supporting management of Services customers general capabilities on Alcatel 7x50 SR series systems. | ||
| NTF tmnxEndPointTxActiveChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.16 | The tmnxEndPointTxActiveChanged notification is generated when the transmit active object on an endpoint changes. | ||
| STR tmnxFailureDescription | 1.3.6.1.4.1.6527.3.1.2.4.6.36 | DisplayString | accessible-for-notify | The value of the object tmnxFailureDescription is a printable character string which contains information about the reason why the notification is sent. |
| NTF tmnxNewCistRegionalRootBridge | 1.3.6.1.4.1.6527.3.1.3.4.5.0.33 | The tmnxNewCistRegionalRootBridge notification is generated when a new regional root bridge has been elected for the Common and Internal Spanning Tree. A new regional root bridge creates a new spanning tree topology and may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF tmnxNewMstiRegionalRootBridge | 1.3.6.1.4.1.6527.3.1.3.4.5.0.34 | The tmnxNewMstiRegionalRootBridge notification is generated when a new regional root bridge has been elected for the Multiple Spanning Tree Instance. A new regional root bridge creates a new spanning tree topology and may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| TST tmnxOldSdpBindTlsStpPortState | 1.3.6.1.4.1.6527.3.1.2.4.5.4 | TStpPortState | accessible-for-notify | tmnxOldSdpBindTlsStpPortState specifies the previous state of an SDP binding. |
| BRI tmnxOtherBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.5.3 | BridgeId | accessible-for-notify | tmnxOtherBridgeId specifies the bridge identifier of the device from which a BPDU was received. |
| NTF tmnxPipStpExcepCondStateChng | 1.3.6.1.4.1.6527.3.1.3.4.5.0.41 | The tmnxPipStpExcepCondStateChng notification is generated when the value of the object tlsPipStpException has changed, i.e. when the exception condition changes on the indicated PIP Uplink. | ||
| tmnxServConformance | 1.3.6.1.4.1.6527.3.1.1.4 | |||
| tmnxServNotifications | 1.3.6.1.4.1.6527.3.1.3.4 | |||
| tmnxServObjs | 1.3.6.1.4.1.6527.3.1.2.4 | |||
| tmnxSvc7450V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.100 | The compliance statement for management of services on Alcatel 7450 ESS series systems release R6.0. | ||
| tmnxSvc7710V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.102 | The compliance statement for management of services on Alcatel 7710 SR series systems release R6.0. | ||
| tmnxSvc7750V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.101 | The compliance statement for management of services on Alcatel 7750 SR series systems release R6.0. | ||
| tmnxSvcBsxV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.121 | The group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcCompliances | 1.3.6.1.4.1.6527.3.1.1.4.2.1 | |||
| tmnxSvcConformance | 1.3.6.1.4.1.6527.3.1.1.4.2 | |||
| tmnxSvcDhcpV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.110 | The group of objects supporting management of Services DHCP Lease capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcEndPointV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.111 | The group of objects supporting management of Services endpoint capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcEpipeV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.117 | The group of objects supporting management of Services PBB Epipe capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcGroups | 1.3.6.1.4.1.6527.3.1.1.4.2.2 | |||
| tmnxSvcIesIfV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.104 | The group of objects supporting management of Services IES interface capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcIfDHCP6V6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.114 | The group of objects supporting management of Services interface DHCP capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcNotifyObjs | 1.3.6.1.4.1.6527.3.1.2.4.6 | |||
| tmnxSvcNotifyObjsV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.200 | The group of objects supporting management of Services notification objects on Alcatel 7x50 SR series systems. | ||
| tmnxSvcNotifyObsoletedGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.402 | The group of notifications for the services feature on Alcatel 7x50 SR series systems. | ||
| tmnxSvcNotifyV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.401 | The group of notifications for the services feature on Alcatel 7x50 SR series systems. | ||
| NUM tmnxSvcObjRow | 1.3.6.1.4.1.6527.3.1.2.4.6.33 | RowPointer | accessible-for-notify | The value of the object tmnxSvcObjRow indicates the object that has failed to perform the set action requested by the Time-Of-Day Suite. Its value will be the OID of the first accessible object in the row of the sapBaseInfoTable or in the custMultiServiceSiteTable, depending on whether the object is a SAP or a Customer Multi-Service Site. |
| STR tmnxSvcObjRowDescr | 1.3.6.1.4.1.6527.3.1.2.4.6.34 | DisplayString | accessible-for-notify | The value of the object tmnxSvcObjRowDescr indicates the object that has failed to perform the set action requested by the Time-Of-Day Suite. The value will either be a SAP-id or a Customer Multi-Service Site id, presented in readable format, depending on whether the object is a SAP or a Customer Multi-Service Site. |
| tmnxSvcObjs | 1.3.6.1.4.1.6527.3.1.2.4.2 | |||
| STR tmnxSvcObjTodSuite | 1.3.6.1.4.1.6527.3.1.2.4.6.35 | DisplayString | accessible-for-notify | The value of the object tmnxSvcObjTodSuite indicates the name of the involved ToD Suite. |
| NTF tmnxSvcObjTodSuiteApplicFailed | 1.3.6.1.4.1.6527.3.1.3.4.2.0.15 | The tmnxSvcObjTodSuiteApplicFailed notification is generated when the object has failed to perform the set action requested by the Time-Of-Day Suite. The object can be either a SAP or a Customer Multi-Service Site. | ||
| tmnxSvcObsoletedV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.300 | The group of obsolete objects for the services feature on Alcatel 7x50 SR series systems. | ||
| NTF tmnxSvcPEDiscPolServOperStatChg | 1.3.6.1.4.1.6527.3.1.3.4.2.0.17 | The tmnxSvcPEDiscPolServOperStatChg notification is generated when the operational status of a Radius server, configured for use as PE Discovery Policy Server, has transitioned either from 'up' to 'down' or from 'down' to 'up'. | ||
| tmnxSvcPEV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.112 | The group of objects supporting management of Services PE Discovery capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcRdntV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.107 | The group of objects supporting management of Services Redundancy group capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcRoutedCOV5v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.120 | The group of objects supporting routed CO Alcatel 7x50 SR systems. | ||
| tmnxSvcTlsBackbone6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.115 | The group of objects supporting management of Services PBB capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsBgpV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.116 | The group of objects supporting management of Services BGP AD capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsEgrV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.109 | The group of objects supporting management of Services TLS Egress capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsFdbV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.103 | The group of objects supporting management of Services TLS FDB capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsMFibV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.106 | The group of objects supporting management of Services TLS MFib capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsMstiV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.108 | The group of objects supporting management of Services TLS MSTI capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsPipV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.118 | The group of objects supporting management of Services TLS PIP capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsShgV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.105 | The group of objects supporting management of Services TLS Split Hoirizon Group capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcTlsV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.102 | The group of objects supporting management of Services TLS general capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxSvcV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.101 | The group of objects supporting management of Services general capabilities on Alcatel 7x50 SR series systems. | ||
| tmnxTstpCompliances | 1.3.6.1.4.1.6527.3.1.1.4.5.1 | |||
| tmnxTstpConformance | 1.3.6.1.4.1.6527.3.1.1.4.5 | |||
| tmnxTstpGroups | 1.3.6.1.4.1.6527.3.1.1.4.5.2 | |||
| tmnxTstpNotifyObjs | 1.3.6.1.4.1.6527.3.1.2.4.5 | |||
| TST tmnxVcpState | 1.3.6.1.4.1.6527.3.1.2.4.5.5 | TStpPortState | accessible-for-notify | tmnxVcpState specifies the current state of a Virtual Core Port (VCP). |
| NTF topologyChangePipMajorState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.39 | The topologyChangePipMajorState notification is generated when a PIP Uplink has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss. | ||
| NTF topologyChangePipState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.40 | The topologyChangePipState notification is generated when a PIP Uplink has transitioned state to blocking or broken from a state other than forwarding. This event complements what is not covered by topologyChangePipMajorState. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF topologyChangeVcpState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.3 | The topologyChangeVcpState notification is generated when a VCP has transitioned its state from disabled to forwarding or from forwarding to disabled. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| tstpTraps | 1.3.6.1.4.1.6527.3.1.3.4.5.0 | |||
| tstpTrapsPrefix | 1.3.6.1.4.1.6527.3.1.3.4.5 | |||
| NTF vcpActiveProtocolChange | 1.3.6.1.4.1.6527.3.1.3.4.5.0.32 | The vcpActiveProtocolChange notification is generated when the spanning tree protocol on this VCP changes from rstp to stp or vise versa. No recovery is needed. |
RFC description
Alcatel 7750 SR service router services MIB for managing VPLS, VPWS, and IES service instance configuration.
Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.