The value of vRtrInetStaticRoutePreference specifies the priority
of this static route versus the routes from different sources
such as BGP or OSPF etc.

Different protocols should not be configured with the same
preference, if this occurs the tiebreaker is determined per the
default preference value as defined in the table below.

If multiple routes are learned with an identical preference
using the same protocol, the lowest cost is used. If multiple
routes are learned with an identical preference using the same
protocol and the costs (metrics) are equal, then the decision
as to what route to use is determined by the configuration of
the ecmp command.

Default preferences.


Route Type             Preference      Configurable
----------             ----------      ------------
Direct attached                 0                no
Static-route                    5               yes
MPLS (post FCS)                 7
OSPF Internal routes           10                no
OSPF External                 150               yes
BGP                           170               yes