CPI-UNITY-MIB

All MIBs › CPI-UNITY-MIB

Organization: Chatsworth Products Inc.

Last Updated: 2019-03-01

Description: Chatsworth Products Inc. eConnect Unity MIB consolidating SNMP OIDs for all CPI rack PDU and intelligent cabinet management models

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CPI-UNITY-MIB?

CPI-UNITY-MIB is Chatsworth Products Inc.'s consolidated "eConnect Unity" MIB, unifying SNMP object definitions across CPI's rack power distribution unit (PDU) and intelligent cabinet management product line. It exposes device identification and configuration data (version, modelCode, hwAddress), network settings (pduIP, autoIP, autoDNS, ipV4Enable, snmpEnable, telnetEnable), and polling/alarm timing parameters (logInterval, alarmInterval, logDifference) for each managed PDU/cabinet unit. This makes it useful for monitoring the configuration and management-interface status of rack PDU hardware - confirming firmware version, network reachability settings, and alarm-reporting cadence - as a foundation for the broader environmental/power data the eConnect line also collects. It is a consolidating module spanning "all CPI models," implying it depends on and unifies several previously separate CPI product-specific MIBs into one OID tree. It is typically deployed in data center racks where CPI eConnect intelligent PDUs are managed and monitored over SNMP alongside power and environmental sensors, and administrators can explore its full object tree using the CPI-UNITY-MIB MIB Browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CPI-UNITY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Chatsworth Products (CPI) eConnect rack PDU
intelligent cabinet/rack management unit

Monitoring Examples

An administrator would poll version and modelCode to inventory which eConnect PDU firmware/model is installed in a rack, and check pduIP, autoIP, and snmpEnable to confirm the unit's management network configuration is correct and reachable. alarmInterval and logInterval reveal how frequently the PDU reports alarms and logs data, so an unexpectedly long interval could delay detection of a power event. Disabling telnetEnable while snmpEnable remains on would indicate the unit has been hardened to use only SNMP for remote access.

What Can Be Monitored

firmware/model version
hardware (MAC) address
PDU IP/network configuration
SNMP/Telnet management access status
log and alarm reporting interval

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using energyxy1s OID:

Select a Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type energyxy1s into the Find box to locate it in the OID tree, then select it and click OK. It reports xY1 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cpi	1.3.6.1.4.1.30932
products	1.3.6.1.4.1.30932.1			The MIB module is used to register Chatsworth eConnect related SNMP OIDs for all models. Copyright 2014-2019 Chatsworth Products, Inc. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Chatsworth Products, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
cpiPDU	1.3.6.1.4.1.30932.1.1
STR version	1.3.6.1.4.1.30932.1.1.1.1	DisplayString	read-only	Software Version.
STR modelCode	1.3.6.1.4.1.30932.1.1.1.2	DisplayString	read-only	Model code for the PDU.
STR hwAddress	1.3.6.1.4.1.30932.1.1.1.3	DisplayString	read-only	PDU hardware MAC address.
configuration	1.3.6.1.4.1.30932.1.1.2
I32 logInterval	1.3.6.1.4.1.30932.1.1.2.1	Integer32	read-write	The time interval in seconds for logging metrics (disabled if < 10).
I32 alarmInterval	1.3.6.1.4.1.30932.1.1.2.2	Integer32	read-write	The time interval in seconds for alarm cycle (disabled if < 10).
I32 logDifference	1.3.6.1.4.1.30932.1.1.2.3	Integer32	read-write	The current difference in 1/100 Amps that triggers logging metrics.
IP pduIP	1.3.6.1.4.1.30932.1.1.2.4	IpAddress	read-write	PDU IP address.
netOptions	1.3.6.1.4.1.30932.1.1.2.5
I32 autoIP	1.3.6.1.4.1.30932.1.1.2.5.1	Integer32	read-write	Select dynamic (Auto) or static IP, 0=static and 1=dynamic.
I32 autoDNS	1.3.6.1.4.1.30932.1.1.2.5.2	Integer32	read-write	Select dynamic (Auto) or static DNS, 0=static and 1=dynamic.
I32 ipV4Enable	1.3.6.1.4.1.30932.1.1.2.5.3	Integer32	read-write	Enable IPV4 Network, 0=disable and 1=enable.
I32 snmpEnable	1.3.6.1.4.1.30932.1.1.2.5.4	Integer32	read-write	Enable SNMP network service, 0=disable and 1=enable.
I32 telnetEnable	1.3.6.1.4.1.30932.1.1.2.5.5	Integer32	read-write	Enable Telnet service, 0=disable and 1=enable.
I32 sshEnable	1.3.6.1.4.1.30932.1.1.2.5.6	Integer32	read-write	Enable SSH Service, 0=disable and 1=enable.
I32 httpEnable	1.3.6.1.4.1.30932.1.1.2.5.7	Integer32	read-write	Enable HTTP Service, 0=disable and 1=enable.
I32 httpsEnable	1.3.6.1.4.1.30932.1.1.2.5.8	Integer32	read-write	Enable HTTPS Service, 0=disable and 1=enable.
IP subnetMask	1.3.6.1.4.1.30932.1.1.2.6	IpAddress	read-write	PDU Subnet Mask.
IP gateway	1.3.6.1.4.1.30932.1.1.2.7	IpAddress	read-write	PDU Gateway Address.
dnsHosts	1.3.6.1.4.1.30932.1.1.2.8
IP dns1	1.3.6.1.4.1.30932.1.1.2.8.1	IpAddress	read-write	PDU DNS 1 IP.
IP dns2	1.3.6.1.4.1.30932.1.1.2.8.2	IpAddress	read-write	PDU DNS 2 IP.
IP dns3	1.3.6.1.4.1.30932.1.1.2.8.3	IpAddress	read-write	PDU DNS 3 IP.
snmpHosts	1.3.6.1.4.1.30932.1.1.2.9
IP snmpHost1	1.3.6.1.4.1.30932.1.1.2.9.1	IpAddress	read-write	SNMP Host 1 IP address.
IP snmpHost2	1.3.6.1.4.1.30932.1.1.2.9.2	IpAddress	read-write	SNMP Host 2 IP address.
IP snmpHost3	1.3.6.1.4.1.30932.1.1.2.9.3	IpAddress	read-write	SNMP Host 3 IP address.
STR pduIPv6	1.3.6.1.4.1.30932.1.1.2.10	DisplayString	read-write	PDU IPV6 address.
netOptionsIPv6	1.3.6.1.4.1.30932.1.1.2.11
I32 autoIPv6	1.3.6.1.4.1.30932.1.1.2.11.1	Integer32	read-write	Select IPV6 dynamic (Auto) or static IP, 0=static and 1=dynamic.
I32 autoDNSIPv6	1.3.6.1.4.1.30932.1.1.2.11.2	Integer32	read-write	Select IPV6 dynamic (Auto) or static DNS, 0=static and 1=dynamic.
I32 ipV6Enable	1.3.6.1.4.1.30932.1.1.2.11.3	Integer32	read-write	Enable IPV6 Network, 0=disable and 1=enable.
I32 linkLocalEnable	1.3.6.1.4.1.30932.1.1.2.11.4	Integer32	read-write	Enable IPV6 Link-Local, 0=disable and 1=enable.
I32 globalAddrEnable	1.3.6.1.4.1.30932.1.1.2.11.5	Integer32	read-write	Enable IPV6 Global Address, 0=disable and 1=enable.
I32 subnetMaskIPv6	1.3.6.1.4.1.30932.1.1.2.12	Integer32	read-write	PDU IPV6 Subnet Mask.
STR gatewayIPv6	1.3.6.1.4.1.30932.1.1.2.13	DisplayString	read-write	PDU IPV6 Gateway Address.
dnsHostIPv6	1.3.6.1.4.1.30932.1.1.2.14
STR dns1IPv6	1.3.6.1.4.1.30932.1.1.2.14.1	DisplayString	read-write	PDU DNS 2 for IPV6.
STR dns2IPv6	1.3.6.1.4.1.30932.1.1.2.14.2	DisplayString	read-write	PDU DNS 3 for IPV6.
STR dns3IPv6	1.3.6.1.4.1.30932.1.1.2.14.3	DisplayString	read-write	PDU DNS 4 for IPV6.
snmpHostsIPv6	1.3.6.1.4.1.30932.1.1.2.15
STR snmpHost1IPv6	1.3.6.1.4.1.30932.1.1.2.15.1	DisplayString	read-write	SNMP Host 1 IPV6.
STR snmpHost2IPv6	1.3.6.1.4.1.30932.1.1.2.15.2	DisplayString	read-write	SNMP Host 2 IPV6.
STR snmpHost3IPv6	1.3.6.1.4.1.30932.1.1.2.15.3	DisplayString	read-write	SNMP Host 3 IPV6.
receptacleControl	1.3.6.1.4.1.30932.1.1.2.16
I32 outlet1Ctrl	1.3.6.1.4.1.30932.1.1.2.16.1	Integer32	read-write	Outlet1 power state, 0=OFF, 1=ON.
I32 outlet2Ctrl	1.3.6.1.4.1.30932.1.1.2.16.2	Integer32	read-write	Outlet2 power state, 0=OFF, 1=ON.
I32 outlet3Ctrl	1.3.6.1.4.1.30932.1.1.2.16.3	Integer32	read-write	Outlet3 power state, 0=OFF, 1=ON.
I32 outlet4Ctrl	1.3.6.1.4.1.30932.1.1.2.16.4	Integer32	read-write	Outlet4 power state, 0=OFF, 1=ON.
I32 outlet5Ctrl	1.3.6.1.4.1.30932.1.1.2.16.5	Integer32	read-write	Outlet5 power state, 0=OFF, 1=ON.
I32 outlet6Ctrl	1.3.6.1.4.1.30932.1.1.2.16.6	Integer32	read-write	Outlet6 power state, 0=OFF, 1=ON.
I32 outlet7Ctrl	1.3.6.1.4.1.30932.1.1.2.16.7	Integer32	read-write	Outlet7 power state, 0=OFF, 1=ON.
I32 outlet8Ctrl	1.3.6.1.4.1.30932.1.1.2.16.8	Integer32	read-write	Outlet8 power state, 0=OFF, 1=ON.
I32 outlet9Ctrl	1.3.6.1.4.1.30932.1.1.2.16.9	Integer32	read-write	Outlet9 power state, 0=OFF, 1=ON.
I32 outlet10Ctrl	1.3.6.1.4.1.30932.1.1.2.16.10	Integer32	read-write	Outlet10 power state, 0=OFF, 1=ON.
I32 outlet11Ctrl	1.3.6.1.4.1.30932.1.1.2.16.11	Integer32	read-write	Outlet11 power state, 0=OFF, 1=ON.
I32 outlet12Ctrl	1.3.6.1.4.1.30932.1.1.2.16.12	Integer32	read-write	Outlet12 power state, 0=OFF, 1=ON.
I32 outlet13Ctrl	1.3.6.1.4.1.30932.1.1.2.16.13	Integer32	read-write	Outlet13 power state, 0=OFF, 1=ON.
I32 outlet14Ctrl	1.3.6.1.4.1.30932.1.1.2.16.14	Integer32	read-write	Outlet14 power state, 0=OFF, 1=ON.
I32 outlet15Ctrl	1.3.6.1.4.1.30932.1.1.2.16.15	Integer32	read-write	Outlet15 power state, 0=OFF, 1=ON.
I32 outlet16Ctrl	1.3.6.1.4.1.30932.1.1.2.16.16	Integer32	read-write	Outlet16 power state, 0=OFF, 1=ON.
I32 outlet17Ctrl	1.3.6.1.4.1.30932.1.1.2.16.17	Integer32	read-write	Outlet17 power state, 0=OFF, 1=ON.
I32 outlet18Ctrl	1.3.6.1.4.1.30932.1.1.2.16.18	Integer32	read-write	Outlet18 power state, 0=OFF, 1=ON.
I32 outlet19Ctrl	1.3.6.1.4.1.30932.1.1.2.16.19	Integer32	read-write	Outlet19 power state, 0=OFF, 1=ON.
I32 outlet20Ctrl	1.3.6.1.4.1.30932.1.1.2.16.20	Integer32	read-write	Outlet20 power state, 0=OFF, 1=ON.
I32 outlet21Ctrl	1.3.6.1.4.1.30932.1.1.2.16.21	Integer32	read-write	Outlet21 power state, 0=OFF, 1=ON.
I32 outlet22Ctrl	1.3.6.1.4.1.30932.1.1.2.16.22	Integer32	read-write	Outlet22 power state, 0=OFF, 1=ON.
I32 outlet23Ctrl	1.3.6.1.4.1.30932.1.1.2.16.23	Integer32	read-write	Outlet23 power state, 0=OFF, 1=ON.
I32 outlet24Ctrl	1.3.6.1.4.1.30932.1.1.2.16.24	Integer32	read-write	Outlet24 power state, 0=OFF, 1=ON.
receptacleONdelay	1.3.6.1.4.1.30932.1.1.2.17
I32 outlet1ONdly	1.3.6.1.4.1.30932.1.1.2.17.1	Integer32	read-write	Outlet1 power-on delay in seconds.
I32 outlet2ONdly	1.3.6.1.4.1.30932.1.1.2.17.2	Integer32	read-write	Outlet2 power-on delay in seconds.
I32 outlet3ONdly	1.3.6.1.4.1.30932.1.1.2.17.3	Integer32	read-write	Outlet3 power-on delay in seconds.
I32 outlet4ONdly	1.3.6.1.4.1.30932.1.1.2.17.4	Integer32	read-write	Outlet4 power-on delay in seconds.
I32 outlet5ONdly	1.3.6.1.4.1.30932.1.1.2.17.5	Integer32	read-write	Outlet5 power-on delay in seconds.
I32 outlet6ONdly	1.3.6.1.4.1.30932.1.1.2.17.6	Integer32	read-write	Outlet6 power-on delay in seconds.
I32 outlet7ONdly	1.3.6.1.4.1.30932.1.1.2.17.7	Integer32	read-write	Outlet7 power-on delay in seconds.
I32 outlet8ONdly	1.3.6.1.4.1.30932.1.1.2.17.8	Integer32	read-write	Outlet8 power-on delay in seconds.
I32 outlet9ONdly	1.3.6.1.4.1.30932.1.1.2.17.9	Integer32	read-write	Outlet9 power-on delay in seconds.
I32 outlet10ONdly	1.3.6.1.4.1.30932.1.1.2.17.10	Integer32	read-write	Outlet10 power-on delay in seconds.
I32 outlet11ONdly	1.3.6.1.4.1.30932.1.1.2.17.11	Integer32	read-write	Outlet11 power-on delay in seconds.
I32 outlet12ONdly	1.3.6.1.4.1.30932.1.1.2.17.12	Integer32	read-write	Outlet12 power-on delay in seconds.
I32 outlet13ONdly	1.3.6.1.4.1.30932.1.1.2.17.13	Integer32	read-write	Outlet13 power-on delay in seconds.
I32 outlet14ONdly	1.3.6.1.4.1.30932.1.1.2.17.14	Integer32	read-write	Outlet14 power-on delay in seconds.
I32 outlet15ONdly	1.3.6.1.4.1.30932.1.1.2.17.15	Integer32	read-write	Outlet15 power-on delay in seconds.
I32 outlet16ONdly	1.3.6.1.4.1.30932.1.1.2.17.16	Integer32	read-write	Outlet16 power-on delay in seconds.
I32 outlet17ONdly	1.3.6.1.4.1.30932.1.1.2.17.17	Integer32	read-write	Outlet17 power-on delay in seconds.
I32 outlet18ONdly	1.3.6.1.4.1.30932.1.1.2.17.18	Integer32	read-write	Outlet18 power-on delay in seconds.
I32 outlet19ONdly	1.3.6.1.4.1.30932.1.1.2.17.19	Integer32	read-write	Outlet19 power-on delay in seconds.
I32 outlet20ONdly	1.3.6.1.4.1.30932.1.1.2.17.20	Integer32	read-write	Outlet20 power-on delay in seconds.
I32 outlet21ONdly	1.3.6.1.4.1.30932.1.1.2.17.21	Integer32	read-write	Outlet21 power-on delay in seconds.
I32 outlet22ONdly	1.3.6.1.4.1.30932.1.1.2.17.22	Integer32	read-write	Outlet22 power-on delay in seconds.
I32 outlet23ONdly	1.3.6.1.4.1.30932.1.1.2.17.23	Integer32	read-write	Outlet23 power-on delay in seconds.
I32 outlet24ONdly	1.3.6.1.4.1.30932.1.1.2.17.24	Integer32	read-write	Outlet24 power-on delay in seconds.
receptacleResetDelay	1.3.6.1.4.1.30932.1.1.2.18
I32 outlet1RESdly	1.3.6.1.4.1.30932.1.1.2.18.1	Integer32	read-write	Outlet1 reset delay in seconds.
I32 outlet2RESdly	1.3.6.1.4.1.30932.1.1.2.18.2	Integer32	read-write	Outlet2 reset delay in seconds.
I32 outlet3RESdly	1.3.6.1.4.1.30932.1.1.2.18.3	Integer32	read-write	Outlet3 reset delay in seconds.
I32 outlet4RESdly	1.3.6.1.4.1.30932.1.1.2.18.4	Integer32	read-write	Outlet4 reset delay in seconds.
I32 outlet5RESdly	1.3.6.1.4.1.30932.1.1.2.18.5	Integer32	read-write	Outlet5 reset delay in seconds.
I32 outlet6RESdly	1.3.6.1.4.1.30932.1.1.2.18.6	Integer32	read-write	Outlet6 reset delay in seconds.
I32 outlet7RESdly	1.3.6.1.4.1.30932.1.1.2.18.7	Integer32	read-write	Outlet7 reset delay in seconds.
I32 outlet8RESdly	1.3.6.1.4.1.30932.1.1.2.18.8	Integer32	read-write	Outlet8 reset delay in seconds.
I32 outlet9RESdly	1.3.6.1.4.1.30932.1.1.2.18.9	Integer32	read-write	Outlet9 reset delay in seconds.
I32 outlet10RESdly	1.3.6.1.4.1.30932.1.1.2.18.10	Integer32	read-write	Outlet10 reset delay in seconds.
I32 outlet11RESdly	1.3.6.1.4.1.30932.1.1.2.18.11	Integer32	read-write	Outlet11 reset delay in seconds.
I32 outlet12RESdly	1.3.6.1.4.1.30932.1.1.2.18.12	Integer32	read-write	Outlet12 reset delay in seconds.
I32 outlet13RESdly	1.3.6.1.4.1.30932.1.1.2.18.13	Integer32	read-write	Outlet13 reset delay in seconds.
I32 outlet14RESdly	1.3.6.1.4.1.30932.1.1.2.18.14	Integer32	read-write	Outlet14 reset delay in seconds.
I32 outlet15RESdly	1.3.6.1.4.1.30932.1.1.2.18.15	Integer32	read-write	Outlet15 reset delay in seconds.
I32 outlet16RESdly	1.3.6.1.4.1.30932.1.1.2.18.16	Integer32	read-write	Outlet16 reset delay in seconds.
I32 outlet17RESdly	1.3.6.1.4.1.30932.1.1.2.18.17	Integer32	read-write	Outlet17 reset delay in seconds.
I32 outlet18RESdly	1.3.6.1.4.1.30932.1.1.2.18.18	Integer32	read-write	Outlet18 reset delay in seconds.
I32 outlet19RESdly	1.3.6.1.4.1.30932.1.1.2.18.19	Integer32	read-write	Outlet19 reset delay in seconds.
I32 outlet20RESdly	1.3.6.1.4.1.30932.1.1.2.18.20	Integer32	read-write	Outlet20 reset delay in seconds.
I32 outlet21RESdly	1.3.6.1.4.1.30932.1.1.2.18.21	Integer32	read-write	Outlet21 reset delay in seconds.
I32 outlet22RESdly	1.3.6.1.4.1.30932.1.1.2.18.22	Integer32	read-write	Outlet22 reset delay in seconds.
I32 outlet23RESdly	1.3.6.1.4.1.30932.1.1.2.18.23	Integer32	read-write	Outlet23 reset delay in seconds.
I32 outlet24RESdly	1.3.6.1.4.1.30932.1.1.2.18.24	Integer32	read-write	Outlet24 reset delay in seconds.
maxCurrentLimits	1.3.6.1.4.1.30932.1.1.2.19
I32 xy1MaxCurr	1.3.6.1.4.1.30932.1.1.2.19.1	Integer32	read-write	Maximum current that XY1 can draw in 1/100 Amps, 0=ignore.
I32 yz1MaxCurr	1.3.6.1.4.1.30932.1.1.2.19.2	Integer32	read-write	Maximum current that YZ1 can draw in 1/100 Amps, 0=ignore.
I32 zx1MaxCurr	1.3.6.1.4.1.30932.1.1.2.19.3	Integer32	read-write	Maximum current that ZX1 can draw in 1/100 Amps, 0=ignore.
I32 xy2MaxCurr	1.3.6.1.4.1.30932.1.1.2.19.4	Integer32	read-write	Maximum current that XY2 can draw in 1/100 Amps, 0=ignore.
I32 yz2MaxCurr	1.3.6.1.4.1.30932.1.1.2.19.5	Integer32	read-write	Maximum current that YZ2 can draw in 1/100 Amps, 0=ignore.
I32 zx2MaxCurr	1.3.6.1.4.1.30932.1.1.2.19.6	Integer32	read-write	Maximum current that ZX2 can draw in 1/100 Amps, 0=ignore.
minCurrentLimits	1.3.6.1.4.1.30932.1.1.2.20
I32 xy1MinCurr	1.3.6.1.4.1.30932.1.1.2.20.1	Integer32	read-write	Minimum current that XY1 should draw in 1/100 Amps, 0=ignore.
I32 yz1MinCurr	1.3.6.1.4.1.30932.1.1.2.20.2	Integer32	read-write	Minimum current that YZ1 should draw in 1/100 Amps, 0=ignore.
I32 zx1MinCurr	1.3.6.1.4.1.30932.1.1.2.20.3	Integer32	read-write	Minimum current that ZX1 should draw in 1/100 Amps, 0=ignore.
I32 xy2MinCurr	1.3.6.1.4.1.30932.1.1.2.20.4	Integer32	read-write	Minimum current that XY2 should draw in 1/100 Amps, 0=ignore.
I32 yz2MinCurr	1.3.6.1.4.1.30932.1.1.2.20.5	Integer32	read-write	Minimum current that YZ2 should draw in 1/100 Amps, 0=ignore.
I32 zx2MinCurr	1.3.6.1.4.1.30932.1.1.2.20.6	Integer32	read-write	Minimum current that ZX2 should draw in 1/100 Amps, 0=ignore.
warnHiCurrentLimits	1.3.6.1.4.1.30932.1.1.2.21
I32 xy1WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.21.1	Integer32	read-write	Warning upper current limit that XY1 can draw in 1/100 Amps, 0=ignore.
I32 yz1WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.21.2	Integer32	read-write	Warning upper current limit that YZ1 can draw in 1/100 Amps, 0=ignore.
I32 zx1WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.21.3	Integer32	read-write	Warning upper current limit that ZX1 can draw in 1/100 Amps, 0=ignore.
I32 xy2WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.21.4	Integer32	read-write	Warning upper current limit that XY2 can draw in 1/100 Amps, 0=ignore.
I32 yz2WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.21.5	Integer32	read-write	Warning upper current limit that YZ2 can draw in 1/100 Amps, 0=ignore.
I32 zx2WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.21.6	Integer32	read-write	Warning upper current limit that ZX2 can draw in 1/100 Amps, 0=ignore.
warnLoCurrentLimits	1.3.6.1.4.1.30932.1.1.2.22
I32 xy1WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.22.1	Integer32	read-write	Warning lower current limit that XY1 can draw in 1/100 Amps, 0=ignore.
I32 yz1WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.22.2	Integer32	read-write	Warning lower current limit that YZ1 can draw in 1/100 Amps, 0=ignore.
I32 zx1WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.22.3	Integer32	read-write	Warning lower current limit that ZX1 can draw in 1/100 Amps, 0=ignore.
I32 xy2WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.22.4	Integer32	read-write	Warning lower current limit that XY2 can draw in 1/100 Amps, 0=ignore.
I32 yz2WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.22.5	Integer32	read-write	Warning lower current limit that YZ2 can draw in 1/100 Amps, 0=ignore.
I32 zx2WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.22.6	Integer32	read-write	Warning lower current limit that ZX2 can draw in 1/100 Amps, 0=ignore.
maxVoltageLimits	1.3.6.1.4.1.30932.1.1.2.24
I32 xy1MaxVolt	1.3.6.1.4.1.30932.1.1.2.24.1	Integer32	read-write	Maximum voltage that XY1 can reach up to in volts, 0=ignore.
I32 yz1MaxVolt	1.3.6.1.4.1.30932.1.1.2.24.2	Integer32	read-write	Maximum voltage that YZ1 can reach up to in volts, 0=ignore.
I32 zx1MaxVolt	1.3.6.1.4.1.30932.1.1.2.24.3	Integer32	read-write	Maximum voltage that ZX1 can reach up to in volts, 0=ignore.
I32 xy2MaxVolt	1.3.6.1.4.1.30932.1.1.2.24.4	Integer32	read-write	Maximum voltage that XY2 can reach up to in volts, 0=ignore.
I32 yz2MaxVolt	1.3.6.1.4.1.30932.1.1.2.24.5	Integer32	read-write	Maximum voltage that YZ2 can reach up to in volts, 0=ignore.
I32 zx2MaxVolt	1.3.6.1.4.1.30932.1.1.2.24.6	Integer32	read-write	Maximum voltage that ZX2 can reach up to in volts, 0=ignore.
minVoltageLimits	1.3.6.1.4.1.30932.1.1.2.25
I32 xy1MinVolt	1.3.6.1.4.1.30932.1.1.2.25.1	Integer32	read-write	Minimum voltage that XY1 can sag in volts, 0=ignore.
I32 yz1MinVolt	1.3.6.1.4.1.30932.1.1.2.25.2	Integer32	read-write	Minimum voltage that YZ1 can sag in volts, 0=ignore.
I32 zx1MinVolt	1.3.6.1.4.1.30932.1.1.2.25.3	Integer32	read-write	Minimum voltage that ZX1 can sag in volts, 0=ignore.
I32 xy2MinVolt	1.3.6.1.4.1.30932.1.1.2.25.4	Integer32	read-write	Minimum voltage that XY2 can sag in volts, 0=ignore.
I32 yz2MinVolt	1.3.6.1.4.1.30932.1.1.2.25.5	Integer32	read-write	Minimum voltage that YZ2 can sag in volts, 0=ignore.
I32 zx2MinVolt	1.3.6.1.4.1.30932.1.1.2.25.6	Integer32	read-write	Minimum voltage that ZX2 can sag in volts, 0=ignore.
warnHiVoltageLimits	1.3.6.1.4.1.30932.1.1.2.26
I32 xy1WarnHiVolt	1.3.6.1.4.1.30932.1.1.2.26.1	Integer32	read-write	Warning High voltage in volts that XY1 can reach before triggering warning notifications, 0=ignore.
I32 yz1WarnHiVolt	1.3.6.1.4.1.30932.1.1.2.26.2	Integer32	read-write	Warning High voltage in volts that YZ1 can reach before triggering warning notifications, 0=ignore.
I32 zx1WarnHiVolt	1.3.6.1.4.1.30932.1.1.2.26.3	Integer32	read-write	Warning High voltage in volts that ZX1 can reach before triggering warning notifications, 0=ignore.
I32 xy2WarnHiVolt	1.3.6.1.4.1.30932.1.1.2.26.4	Integer32	read-write	Warning High voltage in volts that XY2 can reach before triggering warning notifications, 0=ignore.
I32 yz2WarnHiVolt	1.3.6.1.4.1.30932.1.1.2.26.5	Integer32	read-write	Warning High voltage in volts that YZ2 can reach before triggering warning notifications, 0=ignore.
I32 zx2WarnHiVolt	1.3.6.1.4.1.30932.1.1.2.26.6	Integer32	read-write	Warning High voltage in volts that ZX2 can reach before triggering warning notifications, 0=ignore.
warnLoVoltageLimits	1.3.6.1.4.1.30932.1.1.2.27
I32 xy1WarnLoVolt	1.3.6.1.4.1.30932.1.1.2.27.1	Integer32	read-write	Warning Low voltage in volts that XY1 can sag before triggering notifications, 0=ignore.
I32 yz1WarnLoVolt	1.3.6.1.4.1.30932.1.1.2.27.2	Integer32	read-write	Warning Low voltage in volts that YZ1 can sag before triggering notifications, 0=ignore.
I32 zx1WarnLoVolt	1.3.6.1.4.1.30932.1.1.2.27.3	Integer32	read-write	Warning Low voltage in volts that ZX1 can sag before triggering notifications, 0=ignore.
I32 xy2WarnLoVolt	1.3.6.1.4.1.30932.1.1.2.27.4	Integer32	read-write	Warning Low voltage in volts that XY2 can sag before triggering notifications, 0=ignore.
I32 yz2WarnLoVolt	1.3.6.1.4.1.30932.1.1.2.27.5	Integer32	read-write	Warning Low voltage in volts that YZ2 can sag before triggering notifications, 0=ignore.
I32 zx2WarnLoVolt	1.3.6.1.4.1.30932.1.1.2.27.6	Integer32	read-write	Warning Low voltage in volts that ZX2 can sag before triggering notifications, 0=ignore.
receptacleMaxCurrent	1.3.6.1.4.1.30932.1.1.2.28
I32 outlet1MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.1	Integer32	read-write	Outlet1 maximum current in 1/100 Amps.
I32 outlet2MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.2	Integer32	read-write	Outlet2 maximum current in 1/100 Amps.
I32 outlet3MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.3	Integer32	read-write	Outlet3 maximum current in 1/100 Amps.
I32 outlet4MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.4	Integer32	read-write	Outlet4 maximum current in 1/100 Amps.
I32 outlet5MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.5	Integer32	read-write	Outlet5 maximum current in 1/100 Amps.
I32 outlet6MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.6	Integer32	read-write	Outlet6 maximum current in 1/100 Amps.
I32 outlet7MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.7	Integer32	read-write	Outlet7 maximum current in 1/100 Amps.
I32 outlet8MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.8	Integer32	read-write	Outlet8 maximum current in 1/100 Amps.
I32 outlet9MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.9	Integer32	read-write	Outlet9 maximum current in 1/100 Amps.
I32 outlet10MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.10	Integer32	read-write	Outlet10 maximum current in 1/100 Amps.
I32 outlet11MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.11	Integer32	read-write	Outlet11 maximum current in 1/100 Amps.
I32 outlet12MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.12	Integer32	read-write	Outlet12 maximum current in 1/100 Amps.
I32 outlet13MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.13	Integer32	read-write	Outlet13 maximum current in 1/100 Amps.
I32 outlet14MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.14	Integer32	read-write	Outlet14 maximum current in 1/100 Amps.
I32 outlet15MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.15	Integer32	read-write	Outlet15 maximum current in 1/100 Amps.
I32 outlet16MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.16	Integer32	read-write	Outlet16 maximum current in 1/100 Amps.
I32 outlet17MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.17	Integer32	read-write	Outlet17 maximum current in 1/100 Amps.
I32 outlet18MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.18	Integer32	read-write	Outlet18 maximum current in 1/100 Amps.
I32 outlet19MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.19	Integer32	read-write	Outlet19 maximum current in 1/100 Amps.
I32 outlet20MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.20	Integer32	read-write	Outlet20 maximum current in 1/100 Amps.
I32 outlet21MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.21	Integer32	read-write	Outlet21 maximum current in 1/100 Amps.
I32 outlet22MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.22	Integer32	read-write	Outlet22 maximum current in 1/100 Amps.
I32 outlet23MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.23	Integer32	read-write	Outlet23 maximum current in 1/100 Amps.
I32 outlet24MaxCurr	1.3.6.1.4.1.30932.1.1.2.28.24	Integer32	read-write	Outlet24 maximum current in 1/100 Amps.
receptacleMinCurrent	1.3.6.1.4.1.30932.1.1.2.29
I32 outlet1MinCurr	1.3.6.1.4.1.30932.1.1.2.29.1	Integer32	read-write	Outlet1 minimum current in 1/100 Amps.
I32 outlet2MinCurr	1.3.6.1.4.1.30932.1.1.2.29.2	Integer32	read-write	Outlet2 minimum current in 1/100 Amps.
I32 outlet3MinCurr	1.3.6.1.4.1.30932.1.1.2.29.3	Integer32	read-write	Outlet3 minimum current in 1/100 Amps.
I32 outlet4MinCurr	1.3.6.1.4.1.30932.1.1.2.29.4	Integer32	read-write	Outlet4 minimum current in 1/100 Amps.
I32 outlet5MinCurr	1.3.6.1.4.1.30932.1.1.2.29.5	Integer32	read-write	Outlet5 minimum current in 1/100 Amps.
I32 outlet6MinCurr	1.3.6.1.4.1.30932.1.1.2.29.6	Integer32	read-write	Outlet6 minimum current in 1/100 Amps.
I32 outlet7MinCurr	1.3.6.1.4.1.30932.1.1.2.29.7	Integer32	read-write	Outlet7 minimum current in 1/100 Amps.
I32 outlet8MinCurr	1.3.6.1.4.1.30932.1.1.2.29.8	Integer32	read-write	Outlet8 minimum current in 1/100 Amps.
I32 outlet9MinCurr	1.3.6.1.4.1.30932.1.1.2.29.9	Integer32	read-write	Outlet9 minimum current in 1/100 Amps.
I32 outlet10MinCurr	1.3.6.1.4.1.30932.1.1.2.29.10	Integer32	read-write	Outlet10 minimum current in 1/100 Amps.
I32 outlet11MinCurr	1.3.6.1.4.1.30932.1.1.2.29.11	Integer32	read-write	Outlet11 minimum current in 1/100 Amps.
I32 outlet12MinCurr	1.3.6.1.4.1.30932.1.1.2.29.12	Integer32	read-write	Outlet12 minimum current in 1/100 Amps.
I32 outlet13MinCurr	1.3.6.1.4.1.30932.1.1.2.29.13	Integer32	read-write	Outlet13 minimum current in 1/100 Amps.
I32 outlet14MinCurr	1.3.6.1.4.1.30932.1.1.2.29.14	Integer32	read-write	Outlet14 minimum current in 1/100 Amps.
I32 outlet15MinCurr	1.3.6.1.4.1.30932.1.1.2.29.15	Integer32	read-write	Outlet15 minimum current in 1/100 Amps.
I32 outlet16MinCurr	1.3.6.1.4.1.30932.1.1.2.29.16	Integer32	read-write	Outlet16 minimum current in 1/100 Amps.
I32 outlet17MinCurr	1.3.6.1.4.1.30932.1.1.2.29.17	Integer32	read-write	Outlet17 minimum current in 1/100 Amps.
I32 outlet18MinCurr	1.3.6.1.4.1.30932.1.1.2.29.18	Integer32	read-write	Outlet18 minimum current in 1/100 Amps.
I32 outlet19MinCurr	1.3.6.1.4.1.30932.1.1.2.29.19	Integer32	read-write	Outlet19 minimum current in 1/100 Amps.
I32 outlet20MinCurr	1.3.6.1.4.1.30932.1.1.2.29.20	Integer32	read-write	Outlet20 minimum current in 1/100 Amps.
I32 outlet21MinCurr	1.3.6.1.4.1.30932.1.1.2.29.21	Integer32	read-write	Outlet21 minimum current in 1/100 Amps.
I32 outlet22MinCurr	1.3.6.1.4.1.30932.1.1.2.29.22	Integer32	read-write	Outlet22 minimum current in 1/100 Amps.
I32 outlet23MinCurr	1.3.6.1.4.1.30932.1.1.2.29.23	Integer32	read-write	Outlet23 minimum current in 1/100 Amps.
I32 outlet24MinCurr	1.3.6.1.4.1.30932.1.1.2.29.24	Integer32	read-write	Outlet24 minimum current in 1/100 Amps.
receptacleWarnHiCurrent	1.3.6.1.4.1.30932.1.1.2.30
I32 outlet1WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.1	Integer32	read-write	Outlet1 warning high current in 1/100 Amps.
I32 outlet2WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.2	Integer32	read-write	Outlet2 warning high current in 1/100 Amps.
I32 outlet3WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.3	Integer32	read-write	Outlet3 warning high current in 1/100 Amps.
I32 outlet4WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.4	Integer32	read-write	Outlet4 warning high current in 1/100 Amps.
I32 outlet5WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.5	Integer32	read-write	Outlet5 warning high current in 1/100 Amps.
I32 outlet6WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.6	Integer32	read-write	Outlet6 warning high current in 1/100 Amps.
I32 outlet7WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.7	Integer32	read-write	Outlet7 warning high current in 1/100 Amps.
I32 outlet8WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.8	Integer32	read-write	Outlet8 warning high current in 1/100 Amps.
I32 outlet9WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.9	Integer32	read-write	Outlet9 warning high current in 1/100 Amps.
I32 outlet10WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.10	Integer32	read-write	Outlet10 warning high current in 1/100 Amps.
I32 outlet11WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.11	Integer32	read-write	Outlet11 warning high current in 1/100 Amps.
I32 outlet12WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.12	Integer32	read-write	Outlet12 warning high current in 1/100 Amps.
I32 outlet13WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.13	Integer32	read-write	Outlet13 warning high current in 1/100 Amps.
I32 outlet14WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.14	Integer32	read-write	Outlet14 warning high current in 1/100 Amps.
I32 outlet15WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.15	Integer32	read-write	Outlet15 warning high current in 1/100 Amps.
I32 outlet16WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.16	Integer32	read-write	Outlet16 warning high current in 1/100 Amps.
I32 outlet17WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.17	Integer32	read-write	Outlet17 warning high current in 1/100 Amps.
I32 outlet18WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.18	Integer32	read-write	Outlet18 warning high current in 1/100 Amps.
I32 outlet19WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.19	Integer32	read-write	Outlet19 warning high current in 1/100 Amps.
I32 outlet20WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.20	Integer32	read-write	Outlet20 warning high current in 1/100 Amps.
I32 outlet21WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.21	Integer32	read-write	Outlet21 warning high current in 1/100 Amps.
I32 outlet22WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.22	Integer32	read-write	Outlet22 warning high current in 1/100 Amps.
I32 outlet23WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.23	Integer32	read-write	Outlet23 warning high current in 1/100 Amps.
I32 outlet24WarnHiCurr	1.3.6.1.4.1.30932.1.1.2.30.24	Integer32	read-write	Outlet24 warning high current in 1/100 Amps.
receptacleWarnLoCurrent	1.3.6.1.4.1.30932.1.1.2.31
I32 outlet1WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.1	Integer32	read-write	Outlet1 warning low current in 1/100 Amps.
I32 outlet2WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.2	Integer32	read-write	Outlet2 warning low current in 1/100 Amps.
I32 outlet3WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.3	Integer32	read-write	Outlet3 warning low current in 1/100 Amps.
I32 outlet4WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.4	Integer32	read-write	Outlet4 warning low current in 1/100 Amps.
I32 outlet5WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.5	Integer32	read-write	Outlet5 warning low current in 1/100 Amps.
I32 outlet6WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.6	Integer32	read-write	Outlet6 warning low current in 1/100 Amps.
I32 outlet7WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.7	Integer32	read-write	Outlet7 warning low current in 1/100 Amps.
I32 outlet8WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.8	Integer32	read-write	Outlet8 warning low current in 1/100 Amps.
I32 outlet9WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.9	Integer32	read-write	Outlet9 warning low current in 1/100 Amps.
I32 outlet10WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.10	Integer32	read-write	Outlet10 warning low current in 1/100 Amps.
I32 outlet11WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.11	Integer32	read-write	Outlet11 warning low current in 1/100 Amps.
I32 outlet12WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.12	Integer32	read-write	Outlet12 warning low current in 1/100 Amps.
I32 outlet13WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.13	Integer32	read-write	Outlet13 warning low current in 1/100 Amps.
I32 outlet14WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.14	Integer32	read-write	Outlet14 warning low current in 1/100 Amps.
I32 outlet15WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.15	Integer32	read-write	Outlet15 warning low current in 1/100 Amps.
I32 outlet16WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.16	Integer32	read-write	Outlet16 warning low current in 1/100 Amps.
I32 outlet17WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.17	Integer32	read-write	Outlet17 warning low current in 1/100 Amps.
I32 outlet18WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.18	Integer32	read-write	Outlet18 warning low current in 1/100 Amps.
I32 outlet19WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.19	Integer32	read-write	Outlet19 warning low current in 1/100 Amps.
I32 outlet20WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.20	Integer32	read-write	Outlet20 warning low current in 1/100 Amps.
I32 outlet21WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.21	Integer32	read-write	Outlet21 warning low current in 1/100 Amps.
I32 outlet22WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.22	Integer32	read-write	Outlet22 warning low current in 1/100 Amps.
I32 outlet23WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.23	Integer32	read-write	Outlet23 warning low current in 1/100 Amps.
I32 outlet24WarnLoCurr	1.3.6.1.4.1.30932.1.1.2.31.24	Integer32	read-write	Outlet24 warning low current in 1/100 Amps.
maxTempLimits	1.3.6.1.4.1.30932.1.1.2.32
I32 maxTempProbe1	1.3.6.1.4.1.30932.1.1.2.32.1	Integer32	read-write	Maximum temperature for Probe 1 in 1/100 of degrees Fahrenheit, 0=ignore.
I32 maxTempProbe2	1.3.6.1.4.1.30932.1.1.2.32.2	Integer32	read-write	Maximum temperature for Probe 2 in 1/100 of degrees Fahrenheit, 0=ignore.
minTempLimits	1.3.6.1.4.1.30932.1.1.2.33
I32 minTempProbe1	1.3.6.1.4.1.30932.1.1.2.33.1	Integer32	read-write	Minimum temperature for Probe 1 in 1/100 of degrees Fahrenheit, 0=ignore.
I32 minTempProbe2	1.3.6.1.4.1.30932.1.1.2.33.2	Integer32	read-write	Minimum temperature for Probe 2 in 1/100 of degrees Fahrenheit, 0=ignore.
warnHiTempLimits	1.3.6.1.4.1.30932.1.1.2.34
I32 warnHiTempProbe1	1.3.6.1.4.1.30932.1.1.2.34.1	Integer32	read-write	Warning High temperature for Probe 1 in 1/100 of degrees Fahrenheit, 0=ignore.
I32 warnHiTempProbe2	1.3.6.1.4.1.30932.1.1.2.34.2	Integer32	read-write	Warning High temperature for Probe 2 in 1/100 of degrees Fahrenheit, 0=ignore.
warnLoTempLimits	1.3.6.1.4.1.30932.1.1.2.35
I32 warnLoTempProbe1	1.3.6.1.4.1.30932.1.1.2.35.1	Integer32	read-write	Warning Low temperature for Probe 1 in 1/100 of degrees Fahrenheit, 0=ignore.
I32 warnLoTempProbe2	1.3.6.1.4.1.30932.1.1.2.35.2	Integer32	read-write	Warning Low temperature for Probe 2 in 1/100 of degrees Fahrenheit, 0=ignore.
maxHumidityLimits	1.3.6.1.4.1.30932.1.1.2.36
I32 maxHumidProbe1	1.3.6.1.4.1.30932.1.1.2.36.1	Integer32	read-write	Maximum humidity for Probe 1 in 1/100 of %, 0=ignore.
I32 maxHumidProbe2	1.3.6.1.4.1.30932.1.1.2.36.2	Integer32	read-write	Maximum humidity for Probe 2 in 1/100 of %, 0=ignore.
minHumidityLimits	1.3.6.1.4.1.30932.1.1.2.37
I32 minHumidProbe1	1.3.6.1.4.1.30932.1.1.2.37.1	Integer32	read-write	Minimum humidity for Probe 1 in 1/100 of %, 0=ignore.
I32 minHumidProbe2	1.3.6.1.4.1.30932.1.1.2.37.2	Integer32	read-write	Minimum humidity for Probe 2 in 1/100 of %, 0=ignore.
warnHiHumidityLimits	1.3.6.1.4.1.30932.1.1.2.38
I32 warnHiHumidProbe1	1.3.6.1.4.1.30932.1.1.2.38.1	Integer32	read-write	Warning High humidity for Probe 1 in 1/100 of %, 0=ignore.
I32 warnHiHumidProbe2	1.3.6.1.4.1.30932.1.1.2.38.2	Integer32	read-write	Warning High humidity for Probe 2 in 1/100 of %, 0=ignore.
warnLoHumidityLimits	1.3.6.1.4.1.30932.1.1.2.39
I32 warnLoHumidProbe1	1.3.6.1.4.1.30932.1.1.2.39.1	Integer32	read-write	Warning Low humidity for Probe 1 in 1/100 of %, 0=ignore.
I32 warnLoHumidProbe2	1.3.6.1.4.1.30932.1.1.2.39.2	Integer32	read-write	Warning Low humidity for Probe 2 in 1/100 of %, 0=ignore.
STR pduName	1.3.6.1.4.1.30932.1.1.2.40	DisplayString	read-write	PDU Name.
STR pduDescrip	1.3.6.1.4.1.30932.1.1.2.41	DisplayString	read-write	PDU Description.
receptacleNames	1.3.6.1.4.1.30932.1.1.2.42
STR outlet1Name	1.3.6.1.4.1.30932.1.1.2.42.1	DisplayString	read-write	Outlet1 Name.
STR outlet2Name	1.3.6.1.4.1.30932.1.1.2.42.2	DisplayString	read-write	Outlet2 Name.
STR outlet3Name	1.3.6.1.4.1.30932.1.1.2.42.3	DisplayString	read-write	Outlet3 Name.
STR outlet4Name	1.3.6.1.4.1.30932.1.1.2.42.4	DisplayString	read-write	Outlet4 Name.
STR outlet5Name	1.3.6.1.4.1.30932.1.1.2.42.5	DisplayString	read-write	Outlet5 Name.
STR outlet6Name	1.3.6.1.4.1.30932.1.1.2.42.6	DisplayString	read-write	Outlet6 Name.
STR outlet7Name	1.3.6.1.4.1.30932.1.1.2.42.7	DisplayString	read-write	Outlet7 Name.
STR outlet8Name	1.3.6.1.4.1.30932.1.1.2.42.8	DisplayString	read-write	Outlet8 Name.
STR outlet9Name	1.3.6.1.4.1.30932.1.1.2.42.9	DisplayString	read-write	Outlet9 Name.
STR outlet10Name	1.3.6.1.4.1.30932.1.1.2.42.10	DisplayString	read-write	Outlet10 Name.
STR outlet11Name	1.3.6.1.4.1.30932.1.1.2.42.11	DisplayString	read-write	Outlet11 Name.
STR outlet12Name	1.3.6.1.4.1.30932.1.1.2.42.12	DisplayString	read-write	Outlet12 Name.
STR outlet13Name	1.3.6.1.4.1.30932.1.1.2.42.13	DisplayString	read-write	Outlet13 Name.
STR outlet14Name	1.3.6.1.4.1.30932.1.1.2.42.14	DisplayString	read-write	Outlet14 Name.
STR outlet15Name	1.3.6.1.4.1.30932.1.1.2.42.15	DisplayString	read-write	Outlet15 Name.
STR outlet16Name	1.3.6.1.4.1.30932.1.1.2.42.16	DisplayString	read-write	Outlet16 Name.
STR outlet17Name	1.3.6.1.4.1.30932.1.1.2.42.17	DisplayString	read-write	Outlet17 Name.
STR outlet18Name	1.3.6.1.4.1.30932.1.1.2.42.18	DisplayString	read-write	Outlet18 Name.
STR outlet19Name	1.3.6.1.4.1.30932.1.1.2.42.19	DisplayString	read-write	Outlet19 Name.
STR outlet20Name	1.3.6.1.4.1.30932.1.1.2.42.20	DisplayString	read-write	Outlet20 Name.
STR outlet21Name	1.3.6.1.4.1.30932.1.1.2.42.21	DisplayString	read-write	Outlet21 Name.
STR outlet22Name	1.3.6.1.4.1.30932.1.1.2.42.22	DisplayString	read-write	Outlet22 Name.
STR outlet23Name	1.3.6.1.4.1.30932.1.1.2.42.23	DisplayString	read-write	Outlet23 Name.
STR outlet24Name	1.3.6.1.4.1.30932.1.1.2.42.24	DisplayString	read-write	Outlet24 Name.
receptacleDescrips	1.3.6.1.4.1.30932.1.1.2.43
STR outlet1Descrip	1.3.6.1.4.1.30932.1.1.2.43.1	DisplayString	read-write	Outlet1 Description.
STR outlet2Descrip	1.3.6.1.4.1.30932.1.1.2.43.2	DisplayString	read-write	Outlet2 Description.
STR outlet3Descrip	1.3.6.1.4.1.30932.1.1.2.43.3	DisplayString	read-write	Outlet3 Description.
STR outlet4Descrip	1.3.6.1.4.1.30932.1.1.2.43.4	DisplayString	read-write	Outlet4 Description.
STR outlet5Descrip	1.3.6.1.4.1.30932.1.1.2.43.5	DisplayString	read-write	Outlet5 Description.
STR outlet6Descrip	1.3.6.1.4.1.30932.1.1.2.43.6	DisplayString	read-write	Outlet6 Description.
STR outlet7Descrip	1.3.6.1.4.1.30932.1.1.2.43.7	DisplayString	read-write	Outlet7 Description.
STR outlet8Descrip	1.3.6.1.4.1.30932.1.1.2.43.8	DisplayString	read-write	Outlet8 Description.
STR outlet9Descrip	1.3.6.1.4.1.30932.1.1.2.43.9	DisplayString	read-write	Outlet9 Description.
STR outlet10Descrip	1.3.6.1.4.1.30932.1.1.2.43.10	DisplayString	read-write	Outlet10 Description.
STR outlet11Descrip	1.3.6.1.4.1.30932.1.1.2.43.11	DisplayString	read-write	Outlet11 Description.
STR outlet12Descrip	1.3.6.1.4.1.30932.1.1.2.43.12	DisplayString	read-write	Outlet12 Description.
STR outlet13Descrip	1.3.6.1.4.1.30932.1.1.2.43.13	DisplayString	read-write	Outlet13 Description.
STR outlet14Descrip	1.3.6.1.4.1.30932.1.1.2.43.14	DisplayString	read-write	Outlet14 Description.
STR outlet15Descrip	1.3.6.1.4.1.30932.1.1.2.43.15	DisplayString	read-write	Outlet15 Description.
STR outlet16Descrip	1.3.6.1.4.1.30932.1.1.2.43.16	DisplayString	read-write	Outlet16 Description.
STR outlet17Descrip	1.3.6.1.4.1.30932.1.1.2.43.17	DisplayString	read-write	Outlet17 Description.
STR outlet18Descrip	1.3.6.1.4.1.30932.1.1.2.43.18	DisplayString	read-write	Outlet18 Description.
STR outlet19Descrip	1.3.6.1.4.1.30932.1.1.2.43.19	DisplayString	read-write	Outlet19 Description.
STR outlet20Descrip	1.3.6.1.4.1.30932.1.1.2.43.20	DisplayString	read-write	Outlet20 Description.
STR outlet21Descrip	1.3.6.1.4.1.30932.1.1.2.43.21	DisplayString	read-write	Outlet21 Description.
STR outlet22Descrip	1.3.6.1.4.1.30932.1.1.2.43.22	DisplayString	read-write	Outlet22 Description.
STR outlet23Descrip	1.3.6.1.4.1.30932.1.1.2.43.23	DisplayString	read-write	Outlet23 Description.
STR outlet24Descrip	1.3.6.1.4.1.30932.1.1.2.43.24	DisplayString	read-write	Outlet24 Description.
groupNames	1.3.6.1.4.1.30932.1.1.2.50
STR group1Name	1.3.6.1.4.1.30932.1.1.2.50.1	DisplayString	read-write	Name for GROUP 1 of receptacles.
STR group2Name	1.3.6.1.4.1.30932.1.1.2.50.2	DisplayString	read-write	Name for GROUP 2 of receptacles.
STR group3Name	1.3.6.1.4.1.30932.1.1.2.50.3	DisplayString	read-write	Name for GROUP 3 of receptacles.
STR group4Name	1.3.6.1.4.1.30932.1.1.2.50.4	DisplayString	read-write	Name for GROUP 4 of receptacles.
STR group5Name	1.3.6.1.4.1.30932.1.1.2.50.5	DisplayString	read-write	Name for GROUP 5 of receptacles.
STR group6Name	1.3.6.1.4.1.30932.1.1.2.50.6	DisplayString	read-write	Name for GROUP 6 of receptacles.
STR group7Name	1.3.6.1.4.1.30932.1.1.2.50.7	DisplayString	read-write	Name for GROUP 7 of receptacles.
STR group8Name	1.3.6.1.4.1.30932.1.1.2.50.8	DisplayString	read-write	Name for GROUP 8 of receptacles.
STR group9Name	1.3.6.1.4.1.30932.1.1.2.50.9	DisplayString	read-write	Name for GROUP 9 of receptacles.
STR group10Name	1.3.6.1.4.1.30932.1.1.2.50.10	DisplayString	read-write	Name for GROUP 10 of receptacles.
STR group11Name	1.3.6.1.4.1.30932.1.1.2.50.11	DisplayString	read-write	Name for GROUP 11 of receptacles.
STR group12Name	1.3.6.1.4.1.30932.1.1.2.50.12	DisplayString	read-write	Name for GROUP 12 of receptacles.
STR group13Name	1.3.6.1.4.1.30932.1.1.2.50.13	DisplayString	read-write	Name for GROUP 13 of receptacles.
STR group14Name	1.3.6.1.4.1.30932.1.1.2.50.14	DisplayString	read-write	Name for GROUP 14 of receptacles.
STR group15Name	1.3.6.1.4.1.30932.1.1.2.50.15	DisplayString	read-write	Name for GROUP 15 of receptacles.
STR group16Name	1.3.6.1.4.1.30932.1.1.2.50.16	DisplayString	read-write	Name for GROUP 16 of receptacles.
groupMaps	1.3.6.1.4.1.30932.1.1.2.51
OCT group1Map	1.3.6.1.4.1.30932.1.1.2.51.1	OCTET STRING	read-write	Map for Group 1 of receptacels.
OCT group2Map	1.3.6.1.4.1.30932.1.1.2.51.2	OCTET STRING	read-write	Map for Group 2 of receptacels.
OCT group3Map	1.3.6.1.4.1.30932.1.1.2.51.3	OCTET STRING	read-write	Map for Group 3 of receptacels.
OCT group4Map	1.3.6.1.4.1.30932.1.1.2.51.4	OCTET STRING	read-write	Map for Group 4 of receptacels.
OCT group5Map	1.3.6.1.4.1.30932.1.1.2.51.5	OCTET STRING	read-write	Map for Group 5 of receptacels.
OCT group6Map	1.3.6.1.4.1.30932.1.1.2.51.6	OCTET STRING	read-write	Map for Group 6 of receptacels.
OCT group7Map	1.3.6.1.4.1.30932.1.1.2.51.7	OCTET STRING	read-write	Map for Group 7 of receptacels.
OCT group8Map	1.3.6.1.4.1.30932.1.1.2.51.8	OCTET STRING	read-write	Map for Group 8 of receptacels.
OCT group9Map	1.3.6.1.4.1.30932.1.1.2.51.9	OCTET STRING	read-write	Map for Group 9 of receptacels.
OCT group10Map	1.3.6.1.4.1.30932.1.1.2.51.10	OCTET STRING	read-write	Map for Group 10 of receptacels.
OCT group11Map	1.3.6.1.4.1.30932.1.1.2.51.11	OCTET STRING	read-write	Map for Group 11 of receptacels.
OCT group12Map	1.3.6.1.4.1.30932.1.1.2.51.12	OCTET STRING	read-write	Map for Group 12 of receptacels.
OCT group13Map	1.3.6.1.4.1.30932.1.1.2.51.13	OCTET STRING	read-write	Map for Group 13 of receptacels.
OCT group14Map	1.3.6.1.4.1.30932.1.1.2.51.14	OCTET STRING	read-write	Map for Group 14 of receptacels.
OCT group15Map	1.3.6.1.4.1.30932.1.1.2.51.15	OCTET STRING	read-write	Map for Group 15 of receptacels.
OCT group16Map	1.3.6.1.4.1.30932.1.1.2.51.16	OCTET STRING	read-write	Map for Group 16 of receptacels.
I32 dispTimeout	1.3.6.1.4.1.30932.1.1.2.55	Integer32	read-write	Inactivity timeout in minutes to blank the local display (minimum is 1 minute).
I32 loginTimeout	1.3.6.1.4.1.30932.1.1.2.56	Integer32	read-write	Inactivity timeout in minutes to terminate a logged in session (minimum is 1 minute).
I32 dispBrightness	1.3.6.1.4.1.30932.1.1.2.57	Integer32	read-write	The relative brightness of the local display (0 in min, 9 is max).
pduOptions	1.3.6.1.4.1.30932.1.1.2.58
I32 inputTop	1.3.6.1.4.1.30932.1.1.2.58.1	Integer32	read-write	Input cord entry orientation, 1 = top, 0 = bottom.
I32 pduRole	1.3.6.1.4.1.30932.1.1.2.58.2	Integer32	read-write	PDU Role, 1 = primary, 0 = secondary.
I32 celsiusTemp	1.3.6.1.4.1.30932.1.1.2.58.3	Integer32	read-write	Temperature units, 1=Celsius, 0=Fahrenheit.
I32 enableWeb	1.3.6.1.4.1.30932.1.1.2.58.4	Integer32	read-write	Enable Web Access, 1 = enable, 0 = disable.
I32 snmpHostOnly	1.3.6.1.4.1.30932.1.1.2.58.5	Integer32	read-write	Restrict access to SNMP via listed Hosts only, 1 = listed SNMP hosts only, 0 = any host.
I32 disLocalAuth	1.3.6.1.4.1.30932.1.1.2.58.6	Integer32	read-write	Disable local authentication, 1 = disable, 0 = enable.
I32 enaRadiusAuth	1.3.6.1.4.1.30932.1.1.2.58.7	Integer32	read-write	Enable Radius authentication, 1 = disable, 0 = enable.
I32 enaADAuth	1.3.6.1.4.1.30932.1.1.2.58.8	Integer32	read-write	Enable Active Directory authentication, 1 = disable, 0 = enable.
I32 enaSMTP	1.3.6.1.4.1.30932.1.1.2.58.9	Integer32	read-write	Enable Mail Notification, 1 = disable, 0 = enable.
I32 pduAltRole	1.3.6.1.4.1.30932.1.1.2.58.10	Integer32	read-write	PDU Alternate Role, 1 = alternate, 0 = secondary.
I32 shareRole	1.3.6.1.4.1.30932.1.1.2.58.11	Integer32	read-write	Allow sharing of PDU Primary and Alternate Roles, 1 = shared, 0 = backup only.
I32 outOfService	1.3.6.1.4.1.30932.1.1.2.58.12	Integer32	read-write	Remove a PDU from normal operation, 1 = out of service, 0 = normal operation.
I32 missingPDUNotify	1.3.6.1.4.1.30932.1.1.2.58.13	Integer32	read-write	Notify when a PDU is missing from the link, 1 = enable, 0 = disable.
I32 roleChangeNotify	1.3.6.1.4.1.30932.1.1.2.58.14	Integer32	read-write	Notify when a PDU changes role in the link, 1 = enable, 0 = disable.
I32 sumAmp	1.3.6.1.4.1.30932.1.1.2.58.15	Integer32	read-write	Display the sum of the current across branches, 1 = enable, 0 = disable.
httpPorts	1.3.6.1.4.1.30932.1.1.2.59
I32 httpPort	1.3.6.1.4.1.30932.1.1.2.59.1	Integer32	read-write	Port for unsecure HTTP access.
I32 httpsPort	1.3.6.1.4.1.30932.1.1.2.59.2	Integer32	read-write	Port for secure HTTPS access.
sshPorts	1.3.6.1.4.1.30932.1.1.2.60
I32 sshPort	1.3.6.1.4.1.30932.1.1.2.60.1	Integer32	read-write	Port for secure SSH access.
I32 telnetPort	1.3.6.1.4.1.30932.1.1.2.60.2	Integer32	read-write	Port for non secure Telnet access.
snmpPorts	1.3.6.1.4.1.30932.1.1.2.61
I32 snmpQueryPort	1.3.6.1.4.1.30932.1.1.2.61.1	Integer32	read-write	Port for SNMP query access.
I32 snmpTrapPort	1.3.6.1.4.1.30932.1.1.2.61.2	Integer32	read-write	Port for SNMP trap.
smtpPorts	1.3.6.1.4.1.30932.1.1.2.62
I32 smtpSendPort	1.3.6.1.4.1.30932.1.1.2.62.1	Integer32	read-write	Port for SMTP send.
I32 smtpReceivePort	1.3.6.1.4.1.30932.1.1.2.62.2	Integer32	read-write	Port for SMTP Receive.
STR rfcTimeServer	1.3.6.1.4.1.30932.1.1.2.63	DisplayString	read-write	RFC Time Server Address.
STR ntpTimeServer	1.3.6.1.4.1.30932.1.1.2.64	DisplayString	read-write	NTP Time Server Address.
STR smtpServer	1.3.6.1.4.1.30932.1.1.2.65	DisplayString	read-write	Email Server Address.
STR snmpReadComm	1.3.6.1.4.1.30932.1.1.2.66	DisplayString	read-write	SNMP Read Community.
STR snmpWriteComm	1.3.6.1.4.1.30932.1.1.2.67	DisplayString	read-write	SNMP Write Community.
STR snmpUSMuserName	1.3.6.1.4.1.30932.1.1.2.68	DisplayString	read-write	SNMP USM User Name.
snmpSecurityLevelAlgorithm	1.3.6.1.4.1.30932.1.1.2.69
I32 snmpSecurityLevel	1.3.6.1.4.1.30932.1.1.2.69.1	Integer32	read-write	Security Level for SNMP: 0 = v1, 1 = v2c, 2 = v3 no authentication, 3 = v3 with authentication only, 4 = v3 with authentication and privacy
I32 snmpAuthAlgo	1.3.6.1.4.1.30932.1.1.2.69.2	Integer32	read-write	Authentication Algorithm for SNMP: 0 = SHA, 1 = MD5.
I32 snmpPrivAlgo	1.3.6.1.4.1.30932.1.1.2.69.3	Integer32	read-write	Privacy Algorithm for SNMP: 0 = DES, 1 = AES.
STR snmpAuthPasswd	1.3.6.1.4.1.30932.1.1.2.70	DisplayString	read-write	SNMP Authentication Password.
STR snmpPrivPasswd	1.3.6.1.4.1.30932.1.1.2.71	DisplayString	read-write	SNMP Privacy Password.
STR snmpContextName	1.3.6.1.4.1.30932.1.1.2.72	DisplayString	read-write	SNMP Context Name.
STR snmpEngineID	1.3.6.1.4.1.30932.1.1.2.73	DisplayString	read-write	SNMP Engine ID.
STR snmpLocAuthKey	1.3.6.1.4.1.30932.1.1.2.74	DisplayString	read-write	SNMP Local Authentication Key.
STR snmpLocPrivKey	1.3.6.1.4.1.30932.1.1.2.75	DisplayString	read-write	SNMP Local Privacy Key.
STR smtpUserName	1.3.6.1.4.1.30932.1.1.2.76	DisplayString	read-write	PDU Email User Login Name.
STR smtpUserPasswd	1.3.6.1.4.1.30932.1.1.2.77	DisplayString	read-write	PDU Email User Login Password.
STR smtpEmailAddr	1.3.6.1.4.1.30932.1.1.2.78	DisplayString	read-write	PDU Email address.
smtpEmailDestinations	1.3.6.1.4.1.30932.1.1.2.79
STR smtpEmailDestination1	1.3.6.1.4.1.30932.1.1.2.79.1	DisplayString	read-write	Email destination for recipient 0.
STR smtpEmailDestination2	1.3.6.1.4.1.30932.1.1.2.79.2	DisplayString	read-write	Email destination for recipient 1.
STR smtpEmailDestination3	1.3.6.1.4.1.30932.1.1.2.79.3	DisplayString	read-write	Email destination for recipient 2.
I32 smtpServOptions	1.3.6.1.4.1.30932.1.1.2.80	Integer32	read-write	SMTP Server Options.
STR radiusServer	1.3.6.1.4.1.30932.1.1.2.81	DisplayString	read-write	Radius Authentication Server.
STR radiusSHSecret	1.3.6.1.4.1.30932.1.1.2.82	DisplayString	read-write	Radius Shared Secret.
STR radiusNASServer	1.3.6.1.4.1.30932.1.1.2.83	DisplayString	read-write	Radius Network Access Service.
radiusNASPorts	1.3.6.1.4.1.30932.1.1.2.84
I32 radiusPort	1.3.6.1.4.1.30932.1.1.2.84.1	Integer32	read-write	Port for radius authentication.
I32 nasPort	1.3.6.1.4.1.30932.1.1.2.84.2	Integer32	read-write	Port for Radius Network Access Service.
STR adServer	1.3.6.1.4.1.30932.1.1.2.85	DisplayString	read-write	Active Directory Server.
STR adDomain	1.3.6.1.4.1.30932.1.1.2.86	DisplayString	read-write	Active Directory Domain.
adAllPorts	1.3.6.1.4.1.30932.1.1.2.87
I32 adPort	1.3.6.1.4.1.30932.1.1.2.87.1	Integer32	read-write	Port for Active Directory authentication.
I32 adResvPort	1.3.6.1.4.1.30932.1.1.2.87.2	Integer32	read-write	Alternate or reserved port for Active Directory Authentication.
envProbeNames	1.3.6.1.4.1.30932.1.1.2.88
STR probe1Name	1.3.6.1.4.1.30932.1.1.2.88.1	DisplayString	read-write	Name for Environmental Probe 1.
STR probe2Name	1.3.6.1.4.1.30932.1.1.2.88.2	DisplayString	read-write	Name for Environmental Probe 2.
dLogOptions	1.3.6.1.4.1.30932.1.1.2.89
I32 dLogEnable	1.3.6.1.4.1.30932.1.1.2.89.1	Integer32	read-write	Enable data logging feature, 0=disable and 1=enable.
I32 stdmeterdLog	1.3.6.1.4.1.30932.1.1.2.89.2	Integer32	read-write	Enable logging of branch, receptacle and environmental metrics, 0=disable and 1=enable.
I32 groupmeterdLog	1.3.6.1.4.1.30932.1.1.2.89.3	Integer32	read-write	Enable logging of grouped receptacle metrics, 0=disable and 1=enable.
I32 alarmdLog	1.3.6.1.4.1.30932.1.1.2.89.4	Integer32	read-write	Enable logging of alarm events, 0=disable and 1=enable.
I32 userlogindLog	1.3.6.1.4.1.30932.1.1.2.89.5	Integer32	read-write	Enable logging of user login events, 0=disable and 1=enable.
I32 usersetupdLog	1.3.6.1.4.1.30932.1.1.2.89.6	Integer32	read-write	Enable logging of user setup change events, 0=disable and 1=enable.
I32 fwupdatedLog	1.3.6.1.4.1.30932.1.1.2.89.7	Integer32	read-write	Enable data logging feature, 0=disable and 1=enable.
I32 setupchangedLog	1.3.6.1.4.1.30932.1.1.2.89.8	Integer32	read-write	Enable logging of setup change events, 0=disable and 1=enable.
I32 recepchangedLog	1.3.6.1.4.1.30932.1.1.2.89.9	Integer32	read-write	Enable logging of receptacle state changes, 0=disable and 1=enable.
I32 pduopchangedLog	1.3.6.1.4.1.30932.1.1.2.89.10	Integer32	read-write	Enable logging of PDU operation and state changes, 0=disable and 1=enable.
I32 netservdLog	1.3.6.1.4.1.30932.1.1.2.89.11	Integer32	read-write	Enable data logging to log server over network, 0=disable and 1=enable.
I32 autonetLog	1.3.6.1.4.1.30932.1.1.2.89.12	Integer32	read-write	Enable automatic transfer to log server every 6 hours, 0=disable and 1=enable.
I32 dLogCycle	1.3.6.1.4.1.30932.1.1.2.90	Integer32	read-write	The time interval in minutes for internal data logging to occur.
I32 dLogFullWarnLevel	1.3.6.1.4.1.30932.1.1.2.91	Integer32	read-write	The warning threshold for percentage of storage full (min=50, max=100).
STR netdLogServer	1.3.6.1.4.1.30932.1.1.2.92	DisplayString	read-write	The network address for the data log server.
I32 netdLogPort	1.3.6.1.4.1.30932.1.1.2.93	Integer32	read-write	The port used by the data log server.
STR netdLogUser	1.3.6.1.4.1.30932.1.1.2.94	DisplayString	read-write	The user name to access the data log server.
STR netdLogPasswd	1.3.6.1.4.1.30932.1.1.2.95	DisplayString	read-write	The user password to access the data log server.
STR netdLogDestdir	1.3.6.1.4.1.30932.1.1.2.96	DisplayString	read-write	The destination directory in the data log server.
STR netdLogOptions	1.3.6.1.4.1.30932.1.1.2.97	DisplayString	read-write	The options string when accessing the data log server.
snmpTrapHosts	1.3.6.1.4.1.30932.1.1.2.98
IP snmpTrapHost1	1.3.6.1.4.1.30932.1.1.2.98.1	IpAddress	read-write	SNMP Trap Host 1 IP address.
IP snmpTrapHost2	1.3.6.1.4.1.30932.1.1.2.98.2	IpAddress	read-write	SNMP Trap Host 2 IP address.
IP snmpTrapHost3	1.3.6.1.4.1.30932.1.1.2.98.3	IpAddress	read-write	SNMP Trap Host 3 IP address.
snmpTrapHostsIPv6	1.3.6.1.4.1.30932.1.1.2.99
STR snmpTrapHost1IPv6	1.3.6.1.4.1.30932.1.1.2.99.1	DisplayString	read-write	SNMP Trap Host 1 IPV6.
STR snmpTrapHost2IPv6	1.3.6.1.4.1.30932.1.1.2.99.2	DisplayString	read-write	SNMP Trap Host 2 IPV6.
STR snmpTrapHost3IPv6	1.3.6.1.4.1.30932.1.1.2.99.3	DisplayString	read-write	SNMP Trap Host 3 IPV6.
I32 lnkAttachCount	1.3.6.1.4.1.30932.1.1.2.100	Integer32	read-write	Count of secondary PDUs that are attached to the link.
metrics	1.3.6.1.4.1.30932.1.1.3
mcurrent	1.3.6.1.4.1.30932.1.1.3.1
I32 currentxy1	1.3.6.1.4.1.30932.1.1.3.1.1	Integer32	read-only	XY1 current draw in 1/100 Amps.
I32 currentyz1	1.3.6.1.4.1.30932.1.1.3.1.2	Integer32	read-only	YZ1 current draw in 1/100 Amps.
I32 currentzx1	1.3.6.1.4.1.30932.1.1.3.1.3	Integer32	read-only	ZX1 current draw in 1/100 Amps.
I32 currentxy2	1.3.6.1.4.1.30932.1.1.3.1.4	Integer32	read-only	XY2 current draw in 1/100 Amps.
I32 currentyz2	1.3.6.1.4.1.30932.1.1.3.1.5	Integer32	read-only	YZ2 current draw in 1/100 Amps.
I32 currentzx2	1.3.6.1.4.1.30932.1.1.3.1.6	Integer32	read-only	ZX2 current draw in 1/100 Amps.
mvoltage	1.3.6.1.4.1.30932.1.1.3.2
I32 voltagexy1	1.3.6.1.4.1.30932.1.1.3.2.1	Integer32	read-only	XY1 voltage in 1/10 volts.
I32 voltageyz1	1.3.6.1.4.1.30932.1.1.3.2.2	Integer32	read-only	YZ1 voltage in 1/10 volts.
I32 voltagezx1	1.3.6.1.4.1.30932.1.1.3.2.3	Integer32	read-only	ZX1 voltage in 1/10 volts.
I32 voltagexy2	1.3.6.1.4.1.30932.1.1.3.2.4	Integer32	read-only	XY2 voltage in 1/10 volts.
I32 voltageyz2	1.3.6.1.4.1.30932.1.1.3.2.5	Integer32	read-only	YZ2 voltage in 1/10 volts.
I32 voltagezx2	1.3.6.1.4.1.30932.1.1.3.2.6	Integer32	read-only	ZX2 voltage in 1/10 volts.
mpower	1.3.6.1.4.1.30932.1.1.3.3
I32 powerxy1	1.3.6.1.4.1.30932.1.1.3.3.1	Integer32	read-only	XY1 power consumption in Watts.
I32 poweryz1	1.3.6.1.4.1.30932.1.1.3.3.2	Integer32	read-only	YZ1 power consumption in Watts.
I32 powerzx1	1.3.6.1.4.1.30932.1.1.3.3.3	Integer32	read-only	ZX1 power consumption in Watts.
I32 powerxy2	1.3.6.1.4.1.30932.1.1.3.3.4	Integer32	read-only	XY2 power consumption in Watts.
I32 poweryz2	1.3.6.1.4.1.30932.1.1.3.3.5	Integer32	read-only	YZ2 power consumption in Watts.
I32 powerzx2	1.3.6.1.4.1.30932.1.1.3.3.6	Integer32	read-only	ZX2 power consumption in Watts.
mpowerFactor	1.3.6.1.4.1.30932.1.1.3.4
I32 powerFactxy1	1.3.6.1.4.1.30932.1.1.3.4.1	Integer32	read-only	XY1 power factor x 100.
I32 powerFactyz1	1.3.6.1.4.1.30932.1.1.3.4.2	Integer32	read-only	YZ1 power factor x 100.
I32 powerFactzx1	1.3.6.1.4.1.30932.1.1.3.4.3	Integer32	read-only	ZX1 power factor x 100.
I32 powerFactxy2	1.3.6.1.4.1.30932.1.1.3.4.4	Integer32	read-only	XY2 power factor x 100.
I32 powerFactyz2	1.3.6.1.4.1.30932.1.1.3.4.5	Integer32	read-only	YZ2 power factor x 100.
I32 powerFactzx2	1.3.6.1.4.1.30932.1.1.3.4.6	Integer32	read-only	ZX2 power factor x 100.
receptacleCurrent	1.3.6.1.4.1.30932.1.1.3.5
I32 outlet1Current	1.3.6.1.4.1.30932.1.1.3.5.1	Integer32	read-only	Outlet1 current draw in 1/100 Amps.
I32 outlet2Current	1.3.6.1.4.1.30932.1.1.3.5.2	Integer32	read-only	Outlet2 current draw in 1/100 Amps.
I32 outlet3Current	1.3.6.1.4.1.30932.1.1.3.5.3	Integer32	read-only	Outlet3 current draw in 1/100 Amps.
I32 outlet4Current	1.3.6.1.4.1.30932.1.1.3.5.4	Integer32	read-only	Outlet4 current draw in 1/100 Amps.
I32 outlet5Current	1.3.6.1.4.1.30932.1.1.3.5.5	Integer32	read-only	Outlet5 current draw in 1/100 Amps.
I32 outlet6Current	1.3.6.1.4.1.30932.1.1.3.5.6	Integer32	read-only	Outlet6 current draw in 1/100 Amps.
I32 outlet7Current	1.3.6.1.4.1.30932.1.1.3.5.7	Integer32	read-only	Outlet7 current draw in 1/100 Amps.
I32 outlet8Current	1.3.6.1.4.1.30932.1.1.3.5.8	Integer32	read-only	Outlet8 current draw in 1/100 Amps.
I32 outlet9Current	1.3.6.1.4.1.30932.1.1.3.5.9	Integer32	read-only	Outlet9 current draw in 1/100 Amps.
I32 outlet10Current	1.3.6.1.4.1.30932.1.1.3.5.10	Integer32	read-only	Outlet10 current draw in 1/100 Amps.
I32 outlet11Current	1.3.6.1.4.1.30932.1.1.3.5.11	Integer32	read-only	Outlet11 current draw in 1/100 Amps.
I32 outlet12Current	1.3.6.1.4.1.30932.1.1.3.5.12	Integer32	read-only	Outlet12 current draw in 1/100 Amps.
I32 outlet13Current	1.3.6.1.4.1.30932.1.1.3.5.13	Integer32	read-only	Outlet13 current draw in 1/100 Amps.
I32 outlet14Current	1.3.6.1.4.1.30932.1.1.3.5.14	Integer32	read-only	Outlet14 current draw in 1/100 Amps.
I32 outlet15Current	1.3.6.1.4.1.30932.1.1.3.5.15	Integer32	read-only	Outlet15 current draw in 1/100 Amps.
I32 outlet16Current	1.3.6.1.4.1.30932.1.1.3.5.16	Integer32	read-only	Outlet16 current draw in 1/100 Amps.
I32 outlet17Current	1.3.6.1.4.1.30932.1.1.3.5.17	Integer32	read-only	Outlet17 current draw in 1/100 Amps.
I32 outlet18Current	1.3.6.1.4.1.30932.1.1.3.5.18	Integer32	read-only	Outlet18 current draw in 1/100 Amps.
I32 outlet19Current	1.3.6.1.4.1.30932.1.1.3.5.19	Integer32	read-only	Outlet19 current draw in 1/100 Amps.
I32 outlet20Current	1.3.6.1.4.1.30932.1.1.3.5.20	Integer32	read-only	Outlet20 current draw in 1/100 Amps.
I32 outlet21Current	1.3.6.1.4.1.30932.1.1.3.5.21	Integer32	read-only	Outlet21 current draw in 1/100 Amps.
I32 outlet22Current	1.3.6.1.4.1.30932.1.1.3.5.22	Integer32	read-only	Outlet22 current draw in 1/100 Amps.
I32 outlet23Current	1.3.6.1.4.1.30932.1.1.3.5.23	Integer32	read-only	Outlet23 current draw in 1/100 Amps.
I32 outlet24Current	1.3.6.1.4.1.30932.1.1.3.5.24	Integer32	read-only	Outlet24 current draw in 1/100 Amps.
STR receptacleCurrentMap	1.3.6.1.4.1.30932.1.1.3.6	DisplayString	read-only	Map of receptacle currents in ascending order and delimited by space.
receptacleStatus	1.3.6.1.4.1.30932.1.1.3.7
I32 outlet1State	1.3.6.1.4.1.30932.1.1.3.7.1	Integer32	read-only	Outlet1 power state, 0=OFF, 1=ON.
I32 outlet2State	1.3.6.1.4.1.30932.1.1.3.7.2	Integer32	read-only	Outlet2 power state, 0=OFF, 1=ON.
I32 outlet3State	1.3.6.1.4.1.30932.1.1.3.7.3	Integer32	read-only	Outlet3 power state, 0=OFF, 1=ON.
I32 outlet4State	1.3.6.1.4.1.30932.1.1.3.7.4	Integer32	read-only	Outlet4 power state, 0=OFF, 1=ON.
I32 outlet5State	1.3.6.1.4.1.30932.1.1.3.7.5	Integer32	read-only	Outlet5 power state, 0=OFF, 1=ON.
I32 outlet6State	1.3.6.1.4.1.30932.1.1.3.7.6	Integer32	read-only	Outlet6 power state, 0=OFF, 1=ON.
I32 outlet7State	1.3.6.1.4.1.30932.1.1.3.7.7	Integer32	read-only	Outlet7 power state, 0=OFF, 1=ON.
I32 outlet8State	1.3.6.1.4.1.30932.1.1.3.7.8	Integer32	read-only	Outlet8 power state, 0=OFF, 1=ON.
I32 outlet9State	1.3.6.1.4.1.30932.1.1.3.7.9	Integer32	read-only	Outlet9 power state, 0=OFF, 1=ON.
I32 outlet10State	1.3.6.1.4.1.30932.1.1.3.7.10	Integer32	read-only	Outlet10 power state, 0=OFF, 1=ON.
I32 outlet11State	1.3.6.1.4.1.30932.1.1.3.7.11	Integer32	read-only	Outlet11 power state, 0=OFF, 1=ON.
I32 outlet12State	1.3.6.1.4.1.30932.1.1.3.7.12	Integer32	read-only	Outlet12 power state, 0=OFF, 1=ON.
I32 outlet13State	1.3.6.1.4.1.30932.1.1.3.7.13	Integer32	read-only	Outlet13 power state, 0=OFF, 1=ON.
I32 outlet14State	1.3.6.1.4.1.30932.1.1.3.7.14	Integer32	read-only	Outlet14 power state, 0=OFF, 1=ON.
I32 outlet15State	1.3.6.1.4.1.30932.1.1.3.7.15	Integer32	read-only	Outlet15 power state, 0=OFF, 1=ON.
I32 outlet16State	1.3.6.1.4.1.30932.1.1.3.7.16	Integer32	read-only	Outlet16 power state, 0=OFF, 1=ON.
I32 outlet17State	1.3.6.1.4.1.30932.1.1.3.7.17	Integer32	read-only	Outlet17 power state, 0=OFF, 1=ON.
I32 outlet18State	1.3.6.1.4.1.30932.1.1.3.7.18	Integer32	read-only	Outlet18 power state, 0=OFF, 1=ON.
I32 outlet19State	1.3.6.1.4.1.30932.1.1.3.7.19	Integer32	read-only	Outlet19 power state, 0=OFF, 1=ON.
I32 outlet20State	1.3.6.1.4.1.30932.1.1.3.7.20	Integer32	read-only	Outlet20 power state, 0=OFF, 1=ON.
I32 outlet21State	1.3.6.1.4.1.30932.1.1.3.7.21	Integer32	read-only	Outlet21 power state, 0=OFF, 1=ON.
I32 outlet22State	1.3.6.1.4.1.30932.1.1.3.7.22	Integer32	read-only	Outlet22 power state, 0=OFF, 1=ON.
I32 outlet23State	1.3.6.1.4.1.30932.1.1.3.7.23	Integer32	read-only	Outlet23 power state, 0=OFF, 1=ON.
I32 outlet24State	1.3.6.1.4.1.30932.1.1.3.7.24	Integer32	read-only	Outlet24 power state, 0=OFF, 1=ON.
temperature	1.3.6.1.4.1.30932.1.1.3.8
I32 temperatureProbe1	1.3.6.1.4.1.30932.1.1.3.8.1	Integer32	read-only	Probe 1 temperature in 1/100 degree Fahrenheit.
I32 temperatureProbe2	1.3.6.1.4.1.30932.1.1.3.8.2	Integer32	read-only	Probe 2 temperature in 1/100 degree Fahrenheit.
humidity	1.3.6.1.4.1.30932.1.1.3.9
I32 humidityProbe1	1.3.6.1.4.1.30932.1.1.3.9.1	Integer32	read-only	Probe 1 humidity in 1/100 %.
I32 humidityProbe2	1.3.6.1.4.1.30932.1.1.3.9.2	Integer32	read-only	Probe 2 humidity in 1/100 %.
alarms	1.3.6.1.4.1.30932.1.1.3.10
I32 alarmsMaxMap	1.3.6.1.4.1.30932.1.1.3.10.1	Integer32	read-only	Max threshold alarmed state bitmap: bit0=currA, bit1=currB, bit2=currC ... bit6=voltA, bit7=voltB, bit8=voltC ... bit12=temperature1, bit13=temperature2, bit14=humidity1, bit15=humidity2
I32 alarmsMinMap	1.3.6.1.4.1.30932.1.1.3.10.2	Integer32	read-only	Min threshold alarmed state bitmap: bit0=currA, bit1=currB, bit2=currC ... bit6=voltA, bit7=voltB, bit8=voltC ... bit12=temperature1, bit13=temperature2, bit14=humidity1, bit15=humidity2
I32 alarmsWarnHiMap	1.3.6.1.4.1.30932.1.1.3.10.3	Integer32	read-only	High threshold warning state bitmap: bit0=currA, bit1=currB, bit2=currC ... bit6=voltA, bit7=voltB, bit8=voltC ... bit12=temperature1, bit13=temperature2, bit14=humidity1, bit15=humidity2
I32 alarmsWarnLoMap	1.3.6.1.4.1.30932.1.1.3.10.4	Integer32	read-only	Low threshold warning state bitmap: bit0=currA, bit1=currB, bit2=currC ... bit6=voltA, bit7=voltB, bit8=voltC ... bit12=temperature1, bit13=temperature2, bit14=humidity1, bit15=humidity2
I32 recep1To32AlarmsMaxMap	1.3.6.1.4.1.30932.1.1.3.10.5	Integer32	read-only	Max threshold alarmed receptacle state bitmap: bit0=recep1, bit1=recep2, ... bit31=recep32
I32 recep1To32AlarmsMinMap	1.3.6.1.4.1.30932.1.1.3.10.7	Integer32	read-only	Min threshold alarmed receptacle state bitmap: bit0=recep1, bit1=recep2, ... bit31=recep32
I32 recep1To32WarnHiMap	1.3.6.1.4.1.30932.1.1.3.10.9	Integer32	read-only	High threshold warning receptacle state bitmap: bit0=recep1, bit1=recep2, ... bit31=recep32
I32 recep1To32WarnLoMap	1.3.6.1.4.1.30932.1.1.3.10.11	Integer32	read-only	Low threshold warning receptacle state bitmap: bit0=recep1, bit1=recep2, ... bit31=recep32
menergy	1.3.6.1.4.1.30932.1.1.3.11
C64 energyxy1sEx	1.3.6.1.4.1.30932.1.1.3.11.1	Counter64	read-only	XY1 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 energyyz1s	1.3.6.1.4.1.30932.1.1.3.11.2	Counter64	read-only	YZ1 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 energyzx1s	1.3.6.1.4.1.30932.1.1.3.11.3	Counter64	read-only	ZX1 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 energyxy2s	1.3.6.1.4.1.30932.1.1.3.11.4	Counter64	read-only	XY2 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 energyyz2s	1.3.6.1.4.1.30932.1.1.3.11.5	Counter64	read-only	YZ2 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 energyzx2s	1.3.6.1.4.1.30932.1.1.3.11.6	Counter64	read-only	ZX2 branch energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
receptacleEnergy	1.3.6.1.4.1.30932.1.1.3.12
C64 receptacleEnergyoutlet1s	1.3.6.1.4.1.30932.1.1.3.12.1	Counter64	read-only	Outlet1 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet2s	1.3.6.1.4.1.30932.1.1.3.12.2	Counter64	read-only	Outlet2 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet3s	1.3.6.1.4.1.30932.1.1.3.12.3	Counter64	read-only	Outlet3 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet4s	1.3.6.1.4.1.30932.1.1.3.12.4	Counter64	read-only	Outlet4 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet5s	1.3.6.1.4.1.30932.1.1.3.12.5	Counter64	read-only	Outlet5 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet6s	1.3.6.1.4.1.30932.1.1.3.12.6	Counter64	read-only	Outlet6 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet7s	1.3.6.1.4.1.30932.1.1.3.12.7	Counter64	read-only	Outlet7 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet8s	1.3.6.1.4.1.30932.1.1.3.12.8	Counter64	read-only	Outlet8 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet9s	1.3.6.1.4.1.30932.1.1.3.12.9	Counter64	read-only	Outlet9 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet10s	1.3.6.1.4.1.30932.1.1.3.12.10	Counter64	read-only	Outlet10 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet11s	1.3.6.1.4.1.30932.1.1.3.12.11	Counter64	read-only	Outlet11 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet12s	1.3.6.1.4.1.30932.1.1.3.12.12	Counter64	read-only	Outlet12 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet13s	1.3.6.1.4.1.30932.1.1.3.12.13	Counter64	read-only	Outlet13 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet14s	1.3.6.1.4.1.30932.1.1.3.12.14	Counter64	read-only	Outlet14 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet15s	1.3.6.1.4.1.30932.1.1.3.12.15	Counter64	read-only	Outlet15 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet16s	1.3.6.1.4.1.30932.1.1.3.12.16	Counter64	read-only	Outlet16 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet17s	1.3.6.1.4.1.30932.1.1.3.12.17	Counter64	read-only	Outlet17 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet18s	1.3.6.1.4.1.30932.1.1.3.12.18	Counter64	read-only	Outlet18 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet19s	1.3.6.1.4.1.30932.1.1.3.12.19	Counter64	read-only	Outlet19 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet20s	1.3.6.1.4.1.30932.1.1.3.12.20	Counter64	read-only	Outlet20 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet21s	1.3.6.1.4.1.30932.1.1.3.12.21	Counter64	read-only	Outlet21 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet22s	1.3.6.1.4.1.30932.1.1.3.12.22	Counter64	read-only	Outlet22 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet23s	1.3.6.1.4.1.30932.1.1.3.12.23	Counter64	read-only	Outlet23 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
C64 receptacleEnergyoutlet24s	1.3.6.1.4.1.30932.1.1.3.12.24	Counter64	read-only	Outlet24 receptacle energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
mline	1.3.6.1.4.1.30932.1.1.3.13
I32 line1curr	1.3.6.1.4.1.30932.1.1.3.13.1	Integer32	read-only	Line 1 current draw in 1/100 Amps.
I32 line2curr	1.3.6.1.4.1.30932.1.1.3.13.2	Integer32	read-only	Line 2 current draw in 1/100 Amps.
I32 line3curr	1.3.6.1.4.1.30932.1.1.3.13.3	Integer32	read-only	Line 3 current draw in 1/100 Amps.
control	1.3.6.1.4.1.30932.1.1.4
creceptacleControl	1.3.6.1.4.1.30932.1.1.4.1
I32 outlet1ONOFF	1.3.6.1.4.1.30932.1.1.4.1.1	Integer32	read-write	Turn ON or OFF power to Outlet1, 1=ON, 0=OFF.
I32 outlet2ONOFF	1.3.6.1.4.1.30932.1.1.4.1.2	Integer32	read-write	Turn ON or OFF power to Outlet2, 1=ON, 0=OFF.
I32 outlet3ONOFF	1.3.6.1.4.1.30932.1.1.4.1.3	Integer32	read-write	Turn ON or OFF power to Outlet3, 1=ON, 0=OFF.
I32 outlet4ONOFF	1.3.6.1.4.1.30932.1.1.4.1.4	Integer32	read-write	Turn ON or OFF power to Outlet4, 1=ON, 0=OFF.
I32 outlet5ONOFF	1.3.6.1.4.1.30932.1.1.4.1.5	Integer32	read-write	Turn ON or OFF power to Outlet5, 1=ON, 0=OFF.
I32 outlet6ONOFF	1.3.6.1.4.1.30932.1.1.4.1.6	Integer32	read-write	Turn ON or OFF power to Outlet6, 1=ON, 0=OFF.
I32 outlet7ONOFF	1.3.6.1.4.1.30932.1.1.4.1.7	Integer32	read-write	Turn ON or OFF power to Outlet7, 1=ON, 0=OFF.
I32 outlet8ONOFF	1.3.6.1.4.1.30932.1.1.4.1.8	Integer32	read-write	Turn ON or OFF power to Outlet8, 1=ON, 0=OFF.
I32 outlet9ONOFF	1.3.6.1.4.1.30932.1.1.4.1.9	Integer32	read-write	Turn ON or OFF power to Outlet9, 1=ON, 0=OFF.
I32 outlet10ONOFF	1.3.6.1.4.1.30932.1.1.4.1.10	Integer32	read-write	Turn ON or OFF power to Outlet10, 1=ON, 0=OFF.
I32 outlet11ONOFF	1.3.6.1.4.1.30932.1.1.4.1.11	Integer32	read-write	Turn ON or OFF power to Outlet11, 1=ON, 0=OFF.
I32 outlet12ONOFF	1.3.6.1.4.1.30932.1.1.4.1.12	Integer32	read-write	Turn ON or OFF power to Outlet12, 1=ON, 0=OFF.
I32 outlet13ONOFF	1.3.6.1.4.1.30932.1.1.4.1.13	Integer32	read-write	Turn ON or OFF power to Outlet13, 1=ON, 0=OFF.
I32 outlet14ONOFF	1.3.6.1.4.1.30932.1.1.4.1.14	Integer32	read-write	Turn ON or OFF power to Outlet14, 1=ON, 0=OFF.
I32 outlet15ONOFF	1.3.6.1.4.1.30932.1.1.4.1.15	Integer32	read-write	Turn ON or OFF power to Outlet15, 1=ON, 0=OFF.
I32 outlet16ONOFF	1.3.6.1.4.1.30932.1.1.4.1.16	Integer32	read-write	Turn ON or OFF power to Outlet16, 1=ON, 0=OFF.
I32 outlet17ONOFF	1.3.6.1.4.1.30932.1.1.4.1.17	Integer32	read-write	Turn ON or OFF power to Outlet17, 1=ON, 0=OFF.
I32 outlet18ONOFF	1.3.6.1.4.1.30932.1.1.4.1.18	Integer32	read-write	Turn ON or OFF power to Outlet18, 1=ON, 0=OFF.
I32 outlet19ONOFF	1.3.6.1.4.1.30932.1.1.4.1.19	Integer32	read-write	Turn ON or OFF power to Outlet19, 1=ON, 0=OFF.
I32 outlet20ONOFF	1.3.6.1.4.1.30932.1.1.4.1.20	Integer32	read-write	Turn ON or OFF power to Outlet20, 1=ON, 0=OFF.
I32 outlet21ONOFF	1.3.6.1.4.1.30932.1.1.4.1.21	Integer32	read-write	Turn ON or OFF power to Outlet21, 1=ON, 0=OFF.
I32 outlet22ONOFF	1.3.6.1.4.1.30932.1.1.4.1.22	Integer32	read-write	Turn ON or OFF power to Outlet22, 1=ON, 0=OFF.
I32 outlet23ONOFF	1.3.6.1.4.1.30932.1.1.4.1.23	Integer32	read-write	Turn ON or OFF power to Outlet23, 1=ON, 0=OFF.
I32 outlet24ONOFF	1.3.6.1.4.1.30932.1.1.4.1.24	Integer32	read-write	Turn ON or OFF power to Outlet24, 1=ON, 0=OFF.
receptacleReset	1.3.6.1.4.1.30932.1.1.4.2
I32 outlet1Reset	1.3.6.1.4.1.30932.1.1.4.2.1	Integer32	read-write	Reset power to Outlet1, 1=reset.
I32 outlet2Reset	1.3.6.1.4.1.30932.1.1.4.2.2	Integer32	read-write	Reset power to Outlet2, 1=reset.
I32 outlet3Reset	1.3.6.1.4.1.30932.1.1.4.2.3	Integer32	read-write	Reset power to Outlet3, 1=reset.
I32 outlet4Reset	1.3.6.1.4.1.30932.1.1.4.2.4	Integer32	read-write	Reset power to Outlet4, 1=reset.
I32 outlet5Reset	1.3.6.1.4.1.30932.1.1.4.2.5	Integer32	read-write	Reset power to Outlet5, 1=reset.
I32 outlet6Reset	1.3.6.1.4.1.30932.1.1.4.2.6	Integer32	read-write	Reset power to Outlet6, 1=reset.
I32 outlet7Reset	1.3.6.1.4.1.30932.1.1.4.2.7	Integer32	read-write	Reset power to Outlet7, 1=reset.
I32 outlet8Reset	1.3.6.1.4.1.30932.1.1.4.2.8	Integer32	read-write	Reset power to Outlet8, 1=reset.
I32 outlet9Reset	1.3.6.1.4.1.30932.1.1.4.2.9	Integer32	read-write	Reset power to Outlet9, 1=reset.
I32 outlet10Reset	1.3.6.1.4.1.30932.1.1.4.2.10	Integer32	read-write	Reset power to Outlet10, 1=reset.
I32 outlet11Reset	1.3.6.1.4.1.30932.1.1.4.2.11	Integer32	read-write	Reset power to Outlet11, 1=reset.
I32 outlet12Reset	1.3.6.1.4.1.30932.1.1.4.2.12	Integer32	read-write	Reset power to Outlet12, 1=reset.
I32 outlet13Reset	1.3.6.1.4.1.30932.1.1.4.2.13	Integer32	read-write	Reset power to Outlet13, 1=reset.
I32 outlet14Reset	1.3.6.1.4.1.30932.1.1.4.2.14	Integer32	read-write	Reset power to Outlet14, 1=reset.
I32 outlet15Reset	1.3.6.1.4.1.30932.1.1.4.2.15	Integer32	read-write	Reset power to Outlet15, 1=reset.
I32 outlet16Reset	1.3.6.1.4.1.30932.1.1.4.2.16	Integer32	read-write	Reset power to Outlet16, 1=reset.
I32 outlet17Reset	1.3.6.1.4.1.30932.1.1.4.2.17	Integer32	read-write	Reset power to Outlet17, 1=reset.
I32 outlet18Reset	1.3.6.1.4.1.30932.1.1.4.2.18	Integer32	read-write	Reset power to Outlet18, 1=reset.
I32 outlet19Reset	1.3.6.1.4.1.30932.1.1.4.2.19	Integer32	read-write	Reset power to Outlet19, 1=reset.
I32 outlet20Reset	1.3.6.1.4.1.30932.1.1.4.2.20	Integer32	read-write	Reset power to Outlet20, 1=reset.
I32 outlet21Reset	1.3.6.1.4.1.30932.1.1.4.2.21	Integer32	read-write	Reset power to Outlet21, 1=reset.
I32 outlet22Reset	1.3.6.1.4.1.30932.1.1.4.2.22	Integer32	read-write	Reset power to Outlet22, 1=reset.
I32 outlet23Reset	1.3.6.1.4.1.30932.1.1.4.2.23	Integer32	read-write	Reset power to Outlet23, 1=reset.
I32 outlet24Reset	1.3.6.1.4.1.30932.1.1.4.2.24	Integer32	read-write	Reset power to Outlet24, 1=reset.
STR receptacleCtrlMap	1.3.6.1.4.1.30932.1.1.4.3	DisplayString	read-only	Map of receptacle status in ascending order, 1=ON, 0=OFF.
chained	1.3.6.1.4.1.30932.1.1.5
I32 pduCount	1.3.6.1.4.1.30932.1.1.5.1	Integer32	read-only	Count of number of PDUs in the chain.
OCT pduMap	1.3.6.1.4.1.30932.1.1.5.2	OCTET STRING	read-only	Table map of PDU IDs in the chain, each ID consists of 4 bytes.
I32 pduSelect	1.3.6.1.4.1.30932.1.1.5.3	Integer32	read-write	Selects the PDUs in the chain for access.
OCT pduNamelist	1.3.6.1.4.1.30932.1.1.5.4	OCTET STRING	read-only	List of PDU Names in the chain link, delimited by '\|' and in matching order with pduMap.
cpiTraps	1.3.6.1.4.1.30932.1.1.6
cpiSpecific	1.3.6.1.4.1.30932.1.1.6.0
NTF maxCurrentxy1	1.3.6.1.4.1.30932.1.1.6.0.1			Trap is sent when current in XY1 exceeds set limit.
NTF maxCurrentyz1	1.3.6.1.4.1.30932.1.1.6.0.2			Trap is sent when current in YZ1 exceeds set limit.
NTF maxCurrentzx1	1.3.6.1.4.1.30932.1.1.6.0.3			Trap is sent when current in ZX1 exceeds set limit.
NTF maxCurrentxy2	1.3.6.1.4.1.30932.1.1.6.0.4			Trap is sent when current in XY2 exceeds set limit.
NTF maxCurrentyz2	1.3.6.1.4.1.30932.1.1.6.0.5			Trap is sent when current in YZ2 exceeds set limit.
NTF maxCurrentzx2	1.3.6.1.4.1.30932.1.1.6.0.6			Trap is sent when current in ZX2 exceeds set limit.
NTF minCurrentxy1	1.3.6.1.4.1.30932.1.1.6.0.7			Trap is sent when current in XY1 drops below set limit.
NTF minCurrentyz1	1.3.6.1.4.1.30932.1.1.6.0.8			Trap is sent when current in YZ1 drops below set limit.
NTF minCurrentzx1	1.3.6.1.4.1.30932.1.1.6.0.9			Trap is sent when current in ZX1 drops below set limit.
NTF minCurrentxy2	1.3.6.1.4.1.30932.1.1.6.0.10			Trap is sent when current in XY2 drops below set limit.
NTF minCurrentyz2	1.3.6.1.4.1.30932.1.1.6.0.11			Trap is sent when current in YZ2 drops below set limit.
NTF minCurrentzx2	1.3.6.1.4.1.30932.1.1.6.0.12			Trap is sent when current in ZX2 drops below set limit.
NTF maxVoltxy1	1.3.6.1.4.1.30932.1.1.6.0.13			Trap is sent when voltage in XY1 exceeds high limit.
NTF maxVoltyz1	1.3.6.1.4.1.30932.1.1.6.0.14			Trap is sent when voltage in YZ1 exceeds high limit.
NTF maxVoltzx1	1.3.6.1.4.1.30932.1.1.6.0.15			Trap is sent when voltage in ZX1 exceeds high limit.
NTF maxVoltxy2	1.3.6.1.4.1.30932.1.1.6.0.16			Trap is sent when voltage in XY2 exceeds high limit.
NTF maxVoltyz2	1.3.6.1.4.1.30932.1.1.6.0.17			Trap is sent when voltage in YZ2 exceeds high limit.
NTF maxVoltzx2	1.3.6.1.4.1.30932.1.1.6.0.18			Trap is sent when voltage in ZX2 exceeds high limit.
NTF minVoltxy1	1.3.6.1.4.1.30932.1.1.6.0.19			Trap is sent when voltage in XY1 drops below low limit.
NTF minVoltyz1	1.3.6.1.4.1.30932.1.1.6.0.20			Trap is sent when voltage in YZ1 drops below low limit.
NTF minVoltzx1	1.3.6.1.4.1.30932.1.1.6.0.21			Trap is sent when voltage in ZX1 drops below low limit.
NTF minVoltxy2	1.3.6.1.4.1.30932.1.1.6.0.22			Trap is sent when voltage in XY2 drops below low limit.
NTF minVoltyz2	1.3.6.1.4.1.30932.1.1.6.0.23			Trap is sent when voltage in YZ2 drops below low limit.
NTF minVoltzx2	1.3.6.1.4.1.30932.1.1.6.0.24			Trap is sent when voltage in ZX2 drops below low limit.
NTF maxTemperature1	1.3.6.1.4.1.30932.1.1.6.0.25			Trap is sent when temperature exceeds high limit.
NTF maxTemperature2	1.3.6.1.4.1.30932.1.1.6.0.26			Trap is sent when temperature exceeds high limit.
NTF minTemperature1	1.3.6.1.4.1.30932.1.1.6.0.27			Trap is sent when temperature drops below low limit.
NTF minTemperature2	1.3.6.1.4.1.30932.1.1.6.0.28			Trap is sent when temperature drops below low limit.
NTF maxHumidity1	1.3.6.1.4.1.30932.1.1.6.0.29			Trap is sent when humidity exceeds high limit.
NTF maxHumidity2	1.3.6.1.4.1.30932.1.1.6.0.30			Trap is sent when humidity exceeds high limit.
NTF minHumidity1	1.3.6.1.4.1.30932.1.1.6.0.31			Trap is sent when humidity drops below low limit.
NTF minHumidity2	1.3.6.1.4.1.30932.1.1.6.0.32			Trap is sent when humidity drops below low limit.
NTF changeLog	1.3.6.1.4.1.30932.1.1.6.0.33			Trap is sent when changes in current exceed the amount set in LOGDIFFERENCE.
NTF dataLog	1.3.6.1.4.1.30932.1.1.6.0.34			Trap is sent when the data logging interval time is reached
NTF alarmChange	1.3.6.1.4.1.30932.1.1.6.0.35			Trap is sent when all alarms have been resolved/cleared
cpiMIBConformance	1.3.6.1.4.1.30932.1.2
cpiMIBCompliances	1.3.6.1.4.1.30932.1.2.1
cpiMIBComplianceRev1	1.3.6.1.4.1.30932.1.2.1.1			The compliance statement for this MIB.
cpiMIBGroups	1.3.6.1.4.1.30932.1.2.2
cpiMIBGroupsObjects	1.3.6.1.4.1.30932.1.2.2.1			A collection of objects for managing the PDU.
cpiMIBGroupNotifications	1.3.6.1.4.1.30932.1.2.2.2			A collection of notifications supported by PDU.
unity	1.3.6.1.4.1.30932.1.10
econnect	1.3.6.1.4.1.30932.1.10.1
econnectConfiguration	1.3.6.1.4.1.30932.1.10.1.1
network	1.3.6.1.4.1.30932.1.10.1.1.1
ipv4	1.3.6.1.4.1.30932.1.10.1.1.1.1
INT ipv4IpV4Enable	1.3.6.1.4.1.30932.1.10.1.1.1.1.1	INTEGER	read-write	Controls whether the IPv4 network interface is enabled.
IP ipv4PduIP	1.3.6.1.4.1.30932.1.10.1.1.1.1.2	IpAddress	read-write	Set or get the IPv4 address of the PDU.
INT ipv4AutoIP	1.3.6.1.4.1.30932.1.10.1.1.1.1.3	INTEGER	read-write	Controls whether the IPv4 address is retrieved from a DHCP server or is set statically.
INT ipv4AutoDNS	1.3.6.1.4.1.30932.1.10.1.1.1.1.4	INTEGER	read-write	Controls whether the DNS addresses are retrieved from a DHCP server or are set statically.
IP ipv4SubnetMask	1.3.6.1.4.1.30932.1.10.1.1.1.1.5	IpAddress	read-write	The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.
IP ipv4Gateway	1.3.6.1.4.1.30932.1.10.1.1.1.1.6	IpAddress	read-write	Set or get the IPv4 address of the gateway router for the PDU.
IP ipv4Dns1	1.3.6.1.4.1.30932.1.10.1.1.1.1.7	IpAddress	read-write	Set or get the IPv4 address of the first DNS entry for the PDU.
IP ipv4Dns2	1.3.6.1.4.1.30932.1.10.1.1.1.1.8	IpAddress	read-write	Set or get the IPv4 address of the second DNS entry for the PDU.
IP ipv4Dns3	1.3.6.1.4.1.30932.1.10.1.1.1.1.9	IpAddress	read-write	Set or get the IPv4 address of the third DNS entry for the PDU.
ipv6	1.3.6.1.4.1.30932.1.10.1.1.1.2
INT ipv6LinkLocalEnable	1.3.6.1.4.1.30932.1.10.1.1.1.2.2	INTEGER	read-write	Controls whether the IPv6 link-local address is enabled.
INT ipv6GlobalAddrEnable	1.3.6.1.4.1.30932.1.10.1.1.1.2.3	INTEGER	read-write	Controls whether the IPv6 global address is enabled.
STR ipv6PduIPv6	1.3.6.1.4.1.30932.1.10.1.1.1.2.4	DisplayString	read-write	Set or get the IPv6 address of the PDU.
INT ipv6AutoIPv6	1.3.6.1.4.1.30932.1.10.1.1.1.2.5	INTEGER	read-write	Controls whether the IPv6 address is retrieved from a DHCP server or is set statically.
I32 autoDNSv6	1.3.6.1.4.1.30932.1.10.1.1.1.2.6	Integer32	read-write	Controls whether the DNS IPv6 address is retrieved from a DHCP server or is set statically.
STR subnetMaskv6	1.3.6.1.4.1.30932.1.10.1.1.1.2.7	DisplayString	read-write	The subnet mask associated with the IPv6 address of this entry. The value of the mask is an IPv6 address with all the network bits set to 1 and all the hosts bits set to 0.
STR gatewayv6	1.3.6.1.4.1.30932.1.10.1.1.1.2.8	DisplayString	read-write	Set or get the IPv6 address of the gateway router for the PDU.
STR dns1v6	1.3.6.1.4.1.30932.1.10.1.1.1.2.9	DisplayString	read-write	Set or get the IPv6 address of the first DNS entry for the PDU.
STR dns2v6	1.3.6.1.4.1.30932.1.10.1.1.1.2.10	DisplayString	read-write	Set or get the IPv6 address of the second DNS entry for the PDU.
STR dns3v6	1.3.6.1.4.1.30932.1.10.1.1.1.2.11	DisplayString	read-write	Set or get the IPv6 address of the third DNS entry for the PDU.
time	1.3.6.1.4.1.30932.1.10.1.1.1.3
STR timeRfcTimeServer	1.3.6.1.4.1.30932.1.10.1.1.1.3.1	DisplayString	read-write	Set or get the IP address of the RFC Time Server.
STR timeNtpTimeServer	1.3.6.1.4.1.30932.1.10.1.1.1.3.2	DisplayString	read-write	Set or get the IP address of the NTP Time Server.
interfaces	1.3.6.1.4.1.30932.1.10.1.1.2
snmp	1.3.6.1.4.1.30932.1.10.1.1.2.1
INT snmpSnmpEnable	1.3.6.1.4.1.30932.1.10.1.1.2.1.1	INTEGER	read-write	Controls whether the SNMP network service is enabled.
econnectSnmpHosts	1.3.6.1.4.1.30932.1.10.1.1.2.1.2
INT snmpHostsSnmpHostOnly	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.1	INTEGER	read-write	Controls whether access to the SNMP service responsed to the listed hosts (snmpHost1, snmpHost2, snmpHost3) or to any host requesting data.
STR snmpHostsSnmpHost1	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.2	DisplayString	read-write	Set or get the IPv4 address of the first host the SNMP service will reply to.
STR snmpHostsSnmpHost2	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.3	DisplayString	read-write	Set or get the IPv4 address of the second host the SNMP service will reply to.
STR snmpHostsSnmpHost3	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.4	DisplayString	read-write	Set or get the IPv4 address of the third host the SNMP service will reply to.
STR snmpHostIPv61	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.5	DisplayString	read-write	Set or get the IPv6 address of the first host the SNMP service will reply to.
STR snmpHostIPv62	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.6	DisplayString	read-write	Set or get the IPv6 address of the first host the SNMP service will reply to.
STR snmpHostIPV63	1.3.6.1.4.1.30932.1.10.1.1.2.1.2.7	DisplayString	read-write	Set or get the IPv6 address of the first host the SNMP service will reply to.
I32 snmpSnmpQueryPort	1.3.6.1.4.1.30932.1.10.1.1.2.1.3	Integer32	read-write	Set or get the port for SNMP query access.
I32 snmpSnmpTrapPort	1.3.6.1.4.1.30932.1.10.1.1.2.1.4	Integer32	read-write	Set or get the port for SNMP traps.
STR snmpSnmpReadComm	1.3.6.1.4.1.30932.1.10.1.1.2.1.5	DisplayString	read-write	Set or get the SNMP Read Community.
STR snmpSnmpWriteComm	1.3.6.1.4.1.30932.1.10.1.1.2.1.6	DisplayString	read-write	Set or get the SNMP Write Community.
STR snmpSnmpUSMuserName	1.3.6.1.4.1.30932.1.10.1.1.2.1.7	DisplayString	read-write	Set or get the SNMP USM User Name.
INT snmpSnmpSecurityLevel	1.3.6.1.4.1.30932.1.10.1.1.2.1.8	INTEGER	read-write	Set or get the security Level for SNMP: 0 = v1, 1 = v2c, 2 = v3 no authentication, 3 = v3 with authentication only, 4 = v3 with authentication and privacy
INT snmpSnmpAuthAlgo	1.3.6.1.4.1.30932.1.10.1.1.2.1.9	INTEGER	read-write	Set or get the Authentication Algorithm for SNMP.
INT snmpSnmpPrivAlgo	1.3.6.1.4.1.30932.1.10.1.1.2.1.10	INTEGER	read-write	Get or get the Privacy Algorithm for SNMP.
STR snmpSnmpAuthPasswd	1.3.6.1.4.1.30932.1.10.1.1.2.1.11	DisplayString	read-write	Set or Get the SNMP Authentication Password.
STR snmpSnmpPrivPasswd	1.3.6.1.4.1.30932.1.10.1.1.2.1.12	DisplayString	read-write	Set or get the SNMP Privacy Password.
STR snmpSnmpContextName	1.3.6.1.4.1.30932.1.10.1.1.2.1.13	DisplayString	read-write	Set or get the SNMP Context Name.
STR snmpSnmpEngineID	1.3.6.1.4.1.30932.1.10.1.1.2.1.14	DisplayString	read-write	Set or get the SNMP Engine ID.
STR snmpSnmpLocAuthKey	1.3.6.1.4.1.30932.1.10.1.1.2.1.15	DisplayString	read-write	Set or get the SNMP Local Authentication Key.
STR snmpSnmpLocPrivKey	1.3.6.1.4.1.30932.1.10.1.1.2.1.16	DisplayString	read-write	Set or get the SNMP Local Privacy Key.
econnectSnmpTrapHosts	1.3.6.1.4.1.30932.1.10.1.1.2.1.17
STR snmpTrapHostsSnmpTrapHost1	1.3.6.1.4.1.30932.1.10.1.1.2.1.17.1	DisplayString	read-write	Set or get the IPv4 address of the first SNMP Trap Host.
STR snmpTrapHostsSnmpTrapHost2	1.3.6.1.4.1.30932.1.10.1.1.2.1.17.2	DisplayString	read-write	Set or get the IPv4 address of the second SNMP Trap Host.
STR snmpTrapHostsSnmpTrapHost3	1.3.6.1.4.1.30932.1.10.1.1.2.1.17.3	DisplayString	read-write	Set or get the IPv4 address of the third SNMP Trap Host.
STR snmpTrapHostIPv61	1.3.6.1.4.1.30932.1.10.1.1.2.1.17.4	DisplayString	read-write	Set or get the IPv6 address of the first SNMP Trap Host.
STR snmpTrapHostIPv62	1.3.6.1.4.1.30932.1.10.1.1.2.1.17.5	DisplayString	read-write	Set or get the IPv6 address of the second SNMP Trap Host.
STR snmpTrapHostIPv63	1.3.6.1.4.1.30932.1.10.1.1.2.1.17.6	DisplayString	read-write	Set or get the IPv6 address of the third SNMP Trap Host.
snmpControl	1.3.6.1.4.1.30932.1.10.1.1.2.1.18
INT enableEASSNMPControl	1.3.6.1.4.1.30932.1.10.1.1.2.1.18.5	INTEGER	read-write	Allows the use of SNMP to open/close the door locks. It is recommended that this only be enabled with SNMP v3 configurations.
http	1.3.6.1.4.1.30932.1.10.1.1.2.2
INT httpEnableWeb	1.3.6.1.4.1.30932.1.10.1.1.2.2.1	INTEGER	read-write	Controls whether the web interface is enabled.
INT httpHttpEnable	1.3.6.1.4.1.30932.1.10.1.1.2.2.2	INTEGER	read-write	Controls whether the HTTP service is enabled.
INT httpHttpsEnable	1.3.6.1.4.1.30932.1.10.1.1.2.2.3	INTEGER	read-write	Controls whether the HTTPS service is enabled.
I32 httpHttpPort	1.3.6.1.4.1.30932.1.10.1.1.2.2.4	Integer32	read-write	Set or get the port for unsecure HTTP access.
I32 httpHttpsPort	1.3.6.1.4.1.30932.1.10.1.1.2.2.5	Integer32	read-write	Set or get the port for secure HTTPS access.
smtp	1.3.6.1.4.1.30932.1.10.1.1.2.3
INT enableSMTP	1.3.6.1.4.1.30932.1.10.1.1.2.3.1	INTEGER	read-write	Controls whether the mail notification service is enabled..
I32 smtpSmtpSendPort	1.3.6.1.4.1.30932.1.10.1.1.2.3.2	Integer32	read-write	Set or get the port for SMTP send.
I32 smtpSmtpReceivePort	1.3.6.1.4.1.30932.1.10.1.1.2.3.3	Integer32	read-write	Set or get the port for SMTP Receive.
STR smtpSmtpServer	1.3.6.1.4.1.30932.1.10.1.1.2.3.4	DisplayString	read-write	Set or get the IP address of the e-mail server.
STR smtpSmtpUserName	1.3.6.1.4.1.30932.1.10.1.1.2.3.5	DisplayString	read-write	Set or get the PDU e-mail user login name.
STR smtpSmtpUserPasswd	1.3.6.1.4.1.30932.1.10.1.1.2.3.6	DisplayString	read-write	Set or get the PDU e-mail user login password.
STR smtpSmtpEmailAddr	1.3.6.1.4.1.30932.1.10.1.1.2.3.7	DisplayString	read-write	Set or get the PDU e-mail address.
STR smtpSmtpEmailDestination1	1.3.6.1.4.1.30932.1.10.1.1.2.3.8	DisplayString	read-write	Set or get the e-mail address of the first recipient.
STR smtpSmtpEmailDestination2	1.3.6.1.4.1.30932.1.10.1.1.2.3.9	DisplayString	read-write	Set or get the e-mail address of the second recipient.
STR smtpSmtpEmailDestination3	1.3.6.1.4.1.30932.1.10.1.1.2.3.10	DisplayString	read-write	Set or get the e-mail address of the third recipient.
I32 smtpSmtpServOptions	1.3.6.1.4.1.30932.1.10.1.1.2.3.11	Integer32	read-write	Set or get the SMTP server options.
logging	1.3.6.1.4.1.30932.1.10.1.1.3
INT logEnable	1.3.6.1.4.1.30932.1.10.1.1.3.1	INTEGER	read-write	Controls whether the data logging feature is enabled.
I32 loggingLogInterval	1.3.6.1.4.1.30932.1.10.1.1.3.2	Integer32	read-write	Set or get the time interval in seconds for logging metrics (disabled if < 10).
I32 loggingLogDifference	1.3.6.1.4.1.30932.1.10.1.1.3.3	Integer32	read-write	Set or get the current difference in 1/100 Amps that triggers logging metrics.
INT loggingNetservdLog	1.3.6.1.4.1.30932.1.10.1.1.3.4	INTEGER	read-write	Controls sending the data logs to log server over network.
INT loggingAutonetLog	1.3.6.1.4.1.30932.1.10.1.1.3.5	INTEGER	read-write	Controls whether automatic transfer to log server every 6 hours is enabled.
INT loggingStdmeterdLog	1.3.6.1.4.1.30932.1.10.1.1.3.6	INTEGER	read-write	Controls whether logging of branch, receptacle and environmental metrics is enabled.
INT loggingGroupmeterdLog	1.3.6.1.4.1.30932.1.10.1.1.3.7	INTEGER	read-write	Controls whether logging of grouped receptacle metrics is enabled.
INT loggingAlarmdLog	1.3.6.1.4.1.30932.1.10.1.1.3.8	INTEGER	read-write	Controls whether logging of alarm events is enabled.
INT loggingUserlogindLog	1.3.6.1.4.1.30932.1.10.1.1.3.9	INTEGER	read-write	Control whether logging of user login events is enabled.
INT loggingUsersetupdLog	1.3.6.1.4.1.30932.1.10.1.1.3.10	INTEGER	read-write	Control whether logging of user setup change events is enabled.
INT loggingFwupdatedLog	1.3.6.1.4.1.30932.1.10.1.1.3.11	INTEGER	read-write	Control whether the logging of firmware updates is enabled.
INT loggingSetupchangedLog	1.3.6.1.4.1.30932.1.10.1.1.3.12	INTEGER	read-write	Control whether the logging of setup change events is enabled.
INT loggingRecepchangedLog	1.3.6.1.4.1.30932.1.10.1.1.3.13	INTEGER	read-write	Control whether logging of receptacle state changes is enabled.
INT loggingPduopchangedLog	1.3.6.1.4.1.30932.1.10.1.1.3.14	INTEGER	read-write	Control whether logging of PDU operation and state changes is enabled.
I32 loggingDLogCycle	1.3.6.1.4.1.30932.1.10.1.1.3.15	Integer32	read-write	Set or get the time interval in minutes for internal data logging to occur.
I32 loggingDLogFullWarnLevel	1.3.6.1.4.1.30932.1.10.1.1.3.16	Integer32	read-write	Set or get the warning threshold for percentage of storage full (min=50, max=100).
STR loggingNetdLogServer	1.3.6.1.4.1.30932.1.10.1.1.3.17	DisplayString	read-write	Set or get the network address for the data server.
I32 loggingNetdLogPort	1.3.6.1.4.1.30932.1.10.1.1.3.18	Integer32	read-write	Set or get the port used by the data server.
STR loggingNetdLogUser	1.3.6.1.4.1.30932.1.10.1.1.3.19	DisplayString	read-write	Set or get the user name to access the data server.
STR loggingNetdLogPasswd	1.3.6.1.4.1.30932.1.10.1.1.3.20	DisplayString	read-write	Set or get the user password to access the data server.
STR loggingNetdLogDestdir	1.3.6.1.4.1.30932.1.10.1.1.3.21	DisplayString	read-write	Get or get the destination directory in the data server.
STR loggingNetdLogOptions	1.3.6.1.4.1.30932.1.10.1.1.3.22	DisplayString	read-write	Get or set the options string when accessing the data server.
STR sysLogIdentity	1.3.6.1.4.1.30932.1.10.1.1.3.23	DisplayString	read-write	Get or set the identity to use with the syslog. The identity is an arbitrary identification string which syslog will prefix to each message. This is intended to identify the source of the message.
INT sysLogFacility	1.3.6.1.4.1.30932.1.10.1.1.3.24	INTEGER	read-write	Get or set the facility to use with the syslog. The facility argument is used to specify what type of program is logging the message.
STR sysLogCentralServerAddr	1.3.6.1.4.1.30932.1.10.1.1.3.25	DisplayString	read-write	Get or set the IP address for the central syslog server.
INT sysLogCentralServerPort	1.3.6.1.4.1.30932.1.10.1.1.3.26	INTEGER	read-write	Get or set the port for the central syslog server.
accesscontrol	1.3.6.1.4.1.30932.1.10.1.1.4
ldap	1.3.6.1.4.1.30932.1.10.1.1.4.1
INT enableADAuth	1.3.6.1.4.1.30932.1.10.1.1.4.1.1	INTEGER	read-write	Controls whether the Active Directory authentication is enabled.
STR ldapAdServer	1.3.6.1.4.1.30932.1.10.1.1.4.1.2	DisplayString	read-write	Set or get the IP address of the Active Directory Server.
STR ldapAdDomain	1.3.6.1.4.1.30932.1.10.1.1.4.1.3	DisplayString	read-write	Set or get the Active Directory Domain.
I32 ldapAdPort	1.3.6.1.4.1.30932.1.10.1.1.4.1.4	Integer32	read-write	Set or get the port for Active Directory authentication.
I32 ldapAdResvPort	1.3.6.1.4.1.30932.1.10.1.1.4.1.5	Integer32	read-write	Set or get the alternate or reserved port for Active Directory Authentication.
radius	1.3.6.1.4.1.30932.1.10.1.1.4.2
INT enableRadiusAuth	1.3.6.1.4.1.30932.1.10.1.1.4.2.1	INTEGER	read-write	Controls whether radius authentication is enabled.
STR radiusRadiusServer	1.3.6.1.4.1.30932.1.10.1.1.4.2.2	DisplayString	read-write	Set or get the IP address of the Radius Authentication Server.
STR radiusRadiusSHSecret	1.3.6.1.4.1.30932.1.10.1.1.4.2.3	DisplayString	read-write	Set or get the Radius Shared Secret.
STR radiusRadiusNASServer	1.3.6.1.4.1.30932.1.10.1.1.4.2.4	DisplayString	read-write	Set or get the Radius Network Access Service.
I32 radiusRadiusPort	1.3.6.1.4.1.30932.1.10.1.1.4.2.5	Integer32	read-write	Set or get the port for radius authentication.
I32 radiusNasPort	1.3.6.1.4.1.30932.1.10.1.1.4.2.6	Integer32	read-write	Set or get the port for Radius Network Access Service.
INT radiusip6	1.3.6.1.4.1.30932.1.10.1.1.4.2.7	INTEGER	read-write	Enable/Disable IPv6 for radius authentication.
INT radiuscardenable	1.3.6.1.4.1.30932.1.10.1.1.4.2.8	INTEGER	read-write	Enable/Disable Radius for card authentication.
STR cardradiusserver	1.3.6.1.4.1.30932.1.10.1.1.4.2.9	DisplayString	read-write	Set or get the IP address of the Primary Radius Card Authentication Server.
STR cardradiusshsecret	1.3.6.1.4.1.30932.1.10.1.1.4.2.10	DisplayString	read-write	Set or get the Radius Card Shared Secret.
I32 cardradiusPort	1.3.6.1.4.1.30932.1.10.1.1.4.2.11	Integer32	read-write	Set or get the port for Radius Card Authentication.
INT cardradiusip6	1.3.6.1.4.1.30932.1.10.1.1.4.2.12	INTEGER	read-write	Enable/Disable IPv6 for Radius Card Authentication.
STR radiusServer2	1.3.6.1.4.1.30932.1.10.1.1.4.2.13	DisplayString	read-write	Set or get the IP address of the Secondary Radius Authentication Server.
I32 radiusPort2	1.3.6.1.4.1.30932.1.10.1.1.4.2.14	Integer32	read-write	Set or get the port for Secondary Radius Authentication.
STR radiusServer3	1.3.6.1.4.1.30932.1.10.1.1.4.2.15	DisplayString	read-write	Set or get the IP address of the Tertiary Radius Authentication Server.
I32 radiusPort3	1.3.6.1.4.1.30932.1.10.1.1.4.2.16	Integer32	read-write	Set or get the port for Tertiary Radius Authentication.
STR cardradiusServer2	1.3.6.1.4.1.30932.1.10.1.1.4.2.17	DisplayString	read-write	Set or get the IP address of the Secondary Radius Card Authentication Server.
I32 cardradiusPort2	1.3.6.1.4.1.30932.1.10.1.1.4.2.18	Integer32	read-write	Set or get the port for Secondary Radius Card Authentication.
STR cardradiusServer3	1.3.6.1.4.1.30932.1.10.1.1.4.2.19	DisplayString	read-write	Set or get the IP address of the Tertiary Radius Card Authentication Server.
I32 cardradiusPort3	1.3.6.1.4.1.30932.1.10.1.1.4.2.20	Integer32	read-write	Set or get the port for Tertiary Radius Card Authentication.
pdu	1.3.6.1.4.1.30932.1.10.1.1.6
INT pduInputTop	1.3.6.1.4.1.30932.1.10.1.1.6.1	INTEGER	read-write	Set or get the input cord entry orientation.
INT pduCelsiusTemp	1.3.6.1.4.1.30932.1.10.1.1.6.2	INTEGER	read-write	Set or get the temperature units.
INT pduShareRole	1.3.6.1.4.1.30932.1.10.1.1.6.3	INTEGER	read-write	Controls whether to allow sharing of PDU Primary and Alternate Roles.
INT pduMissingPDUNotify	1.3.6.1.4.1.30932.1.10.1.1.6.4	INTEGER	read-write	Controls whether to notify when a PDU is missing from the link.
INT pduRoleChangeNotify	1.3.6.1.4.1.30932.1.10.1.1.6.5	INTEGER	read-write	Control whether to notify when a PDU changes role in the link.
I32 pduDispTimeout	1.3.6.1.4.1.30932.1.10.1.1.6.6	Integer32	read-write	Set or get the inactivity timeout in minutes to blank the local display (minimum is 1 minute).
I32 pduLoginTimeout	1.3.6.1.4.1.30932.1.10.1.1.6.7	Integer32	read-write	Set or get the inactivity timeout in minutes to terminate a logged in session (minimum is 1 minute).
I32 pduDispBrightness	1.3.6.1.4.1.30932.1.10.1.1.6.8	Integer32	read-write	Set or get the relative brightness of the local display (0 in min, 9 is max).
INT sumAmps	1.3.6.1.4.1.30932.1.10.1.1.6.9	INTEGER	read-write	Control whether the PDU displays the amperage sum of all branchs.
alerts	1.3.6.1.4.1.30932.1.10.1.1.7
I32 alertsAlarmInterval	1.3.6.1.4.1.30932.1.10.1.1.7.1	Integer32	read-write	Set or get the time interval in seconds for alarm cycle (disabled if < 10).
routing	1.3.6.1.4.1.30932.1.10.1.1.8
eventLogRouting	1.3.6.1.4.1.30932.1.10.1.1.8.1
INT logBranchCritLowVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.1.1	INTEGER	read-write	Enable/Disable logging of Critical Low Voltage on the Branch to the event log.
INT logBranchWarnLowVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.1.2	INTEGER	read-write	Enable/Disable logging of Warning Low Voltage on the Branch to the event log.
INT logBranchWarnHighVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.1.3	INTEGER	read-write	Enable/Disable logging of Warning High Voltage on the Branch to the event log.
INT logBranchCritHighVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.1.4	INTEGER	read-write	Enable/Disable logging of Critical High Voltage on the Branch to the event log.
INT logBranchCritLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.5	INTEGER	read-write	Enable/Disable logging of Critical Low Current on the Branch to the event log.
INT logBranchWarnLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.6	INTEGER	read-write	Enable/Disable logging of Warning Low Current on the Branch to the event log.
INT logBranchWarnHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.7	INTEGER	read-write	Enable/Disable logging of Warning High Current on the Branch to the event log.
INT logBranchCritHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.8	INTEGER	read-write	Enable/Disable logging of Critical High Current on the Branch to the event log.
INT logOutletCritLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.9	INTEGER	read-write	Enable/Disable logging of Critical Low Current on the Outlet to the event log.
INT logOutletWarnLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.10	INTEGER	read-write	Enable/Disable logging of Warning Low Current on the Outlet to the event log.
INT logOutletWarnHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.11	INTEGER	read-write	Enable/Disable logging of Warning High Current on the Outlet to the event log.
INT logOutletCritHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.1.12	INTEGER	read-write	Enable/Disable logging of Critical High Current to the event log.
INT logTempCritLow	1.3.6.1.4.1.30932.1.10.1.1.8.1.13	INTEGER	read-write	Enable/Disable logging of Critical Low Temperature to the event log.
INT logTempWarnLow	1.3.6.1.4.1.30932.1.10.1.1.8.1.14	INTEGER	read-write	Enable/Disable logging of Warning Low Temperature to the event log.
INT logTempWarnHigh	1.3.6.1.4.1.30932.1.10.1.1.8.1.15	INTEGER	read-write	Enable/Disable logging of Warning High Temperature to the event log.
INT logTempCritHigh	1.3.6.1.4.1.30932.1.10.1.1.8.1.16	INTEGER	read-write	Enable/Disable logging of Critical High Temperature to the event log.
INT logHumidCritLow	1.3.6.1.4.1.30932.1.10.1.1.8.1.17	INTEGER	read-write	Enable/Disable logging of Critical Low Humidity to the event log.
INT logHumidWarnLow	1.3.6.1.4.1.30932.1.10.1.1.8.1.18	INTEGER	read-write	Enable/Disable logging of Warning Low Humidity to the event log.
INT logHumidWarnHigh	1.3.6.1.4.1.30932.1.10.1.1.8.1.19	INTEGER	read-write	Enable/Disable logging of Warning High Humidity to the event log.
INT logHumidCritHigh	1.3.6.1.4.1.30932.1.10.1.1.8.1.20	INTEGER	read-write	Enable/Disable logging of Critical High Humidity to the event log.
INT logScanPass	1.3.6.1.4.1.30932.1.10.1.1.8.1.21	INTEGER	read-write	Enable/Disable logging of successful card scan events to the event log.
INT logScanFail	1.3.6.1.4.1.30932.1.10.1.1.8.1.22	INTEGER	read-write	Enable/Disable logging of failed card scan events to the event log.
INT logDoorState	1.3.6.1.4.1.30932.1.10.1.1.8.1.23	INTEGER	read-write	Enable/Disable logging of Door Open/Close events to the event log.
INT logLockState	1.3.6.1.4.1.30932.1.10.1.1.8.1.24	INTEGER	read-write	Enable/Disable logging of Lock Open/Close events to the event log.
INT logExtendedOpen	1.3.6.1.4.1.30932.1.10.1.1.8.1.25	INTEGER	read-write	Enable/Disable logging of extended door open events to the event log.
INT logFirmareUpdate	1.3.6.1.4.1.30932.1.10.1.1.8.1.26	INTEGER	read-write	Enable/Disable logging of Firmare Update events to the event log.
INT logConfigUpdate	1.3.6.1.4.1.30932.1.10.1.1.8.1.27	INTEGER	read-write	Enable/Disable logging of configuration change events to the event log.
INT logRecepChange	1.3.6.1.4.1.30932.1.10.1.1.8.1.28	INTEGER	read-write	Enable/Disable logging of receptacle change events to the event log.
INT logSystem	1.3.6.1.4.1.30932.1.10.1.1.8.1.29	INTEGER	read-write	Enable/Disable logging of system events to the event log.
INT logPduAccess	1.3.6.1.4.1.30932.1.10.1.1.8.1.30	INTEGER	read-write	Enable/Disable logging of access to PDU events to the event log.
INT logSecureArray	1.3.6.1.4.1.30932.1.10.1.1.8.1.31	INTEGER	read-write	Enable/Disable logging of SecureArray events to the event log.
emailRouting	1.3.6.1.4.1.30932.1.10.1.1.8.2
INT emailBranchCritLowVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.2.1	INTEGER	read-write	Enable/Disable notification of Critical Low Voltage on the Branch in an email.
INT emailBranchWarnLowVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.2.2	INTEGER	read-write	Enable/Disable notification of Warning Low Voltage on the Branch in an email.
INT emailBranchWarnHighVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.2.3	INTEGER	read-write	Enable/Disable notification of Warning High Voltage on the Branch in an email.
INT emailBranchCritHighVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.2.4	INTEGER	read-write	Enable/Disable notification of Critical High Voltage on the Branch in an email.
INT emailBranchCritLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.5	INTEGER	read-write	Enable/Disable notification of Critical Low Current on the Branch in an email.
INT emailBranchWarnLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.6	INTEGER	read-write	Enable/Disable notification of Warning Low Current on the Branch in an email.
INT emailBranchWarnHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.7	INTEGER	read-write	Enable/Disable notification of Warning High Current on the Branch in an email.
INT emailBranchCritHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.8	INTEGER	read-write	Enable/Disable notification of Critical High Current on the Branch in an email.
INT emailOutletCritLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.9	INTEGER	read-write	Enable/Disable notification of Critical Low Current on the Outlet in an email.
INT emailOutletWarnLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.10	INTEGER	read-write	Enable/Disable notification of Warning Low Current on the Outlet in an email.
INT emailOutletWarnHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.11	INTEGER	read-write	Enable/Disable notification of Warning High Current on the Outlet in an email.
INT emailOutletCritHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.2.12	INTEGER	read-write	Enable/Disable notification of Critical High Current in an email.
INT emailTempCritLow	1.3.6.1.4.1.30932.1.10.1.1.8.2.13	INTEGER	read-write	Enable/Disable notification of Critical Low Temperature in an email.
INT emailTempWarnLow	1.3.6.1.4.1.30932.1.10.1.1.8.2.14	INTEGER	read-write	Enable/Disable notification of Warning Low Temperature in an email.
INT emailTempWarnHigh	1.3.6.1.4.1.30932.1.10.1.1.8.2.15	INTEGER	read-write	Enable/Disable notification of Warning High Temperature in an email.
INT emailTempCritHigh	1.3.6.1.4.1.30932.1.10.1.1.8.2.16	INTEGER	read-write	Enable/Disable notification of Critical High Temperature in an email.
INT emailHumidCritLow	1.3.6.1.4.1.30932.1.10.1.1.8.2.17	INTEGER	read-write	Enable/Disable notification of Critical Low Humidity in an email.
INT emailHumidWarnLow	1.3.6.1.4.1.30932.1.10.1.1.8.2.18	INTEGER	read-write	Enable/Disable notification of Warning Low Humidity in an email.
INT emailHumidWarnHigh	1.3.6.1.4.1.30932.1.10.1.1.8.2.19	INTEGER	read-write	Enable/Disable notification of Warning High Humidity in an email.
INT emailHumidCritHigh	1.3.6.1.4.1.30932.1.10.1.1.8.2.20	INTEGER	read-write	Enable/Disable notification of Critical High Humidity in an email.
INT emailScanPass	1.3.6.1.4.1.30932.1.10.1.1.8.2.21	INTEGER	read-write	Enable/Disable notification of successful card scan events in an email.
INT emailScanFail	1.3.6.1.4.1.30932.1.10.1.1.8.2.22	INTEGER	read-write	Enable/Disable notification of failed card scan events in an email.
INT emailDoorState	1.3.6.1.4.1.30932.1.10.1.1.8.2.23	INTEGER	read-write	Enable/Disable notification of Door Open/Close events in an email.
INT emailLockState	1.3.6.1.4.1.30932.1.10.1.1.8.2.24	INTEGER	read-write	Enable/Disable notification of Lock Open/Close events in an email.
INT emailExtendedOpen	1.3.6.1.4.1.30932.1.10.1.1.8.2.25	INTEGER	read-write	Enable/Disable notification of extended door open events in an email.
INT emailFirmareUpdate	1.3.6.1.4.1.30932.1.10.1.1.8.2.26	INTEGER	read-write	Enable/Disable notification of Firmare Update events in an email.
INT emailConfigUpdate	1.3.6.1.4.1.30932.1.10.1.1.8.2.27	INTEGER	read-write	Enable/Disable notification of configuration change events in an email.
INT emailRecepChange	1.3.6.1.4.1.30932.1.10.1.1.8.2.28	INTEGER	read-write	Enable/Disable notification of receptacle change events in an email.
INT emailSystem	1.3.6.1.4.1.30932.1.10.1.1.8.2.29	INTEGER	read-write	Enable/Disable notification of system events in an email.
INT emailPduAccess	1.3.6.1.4.1.30932.1.10.1.1.8.2.30	INTEGER	read-write	Enable/Disable notification of access to PDU events in an email.
INT emailSecureArray	1.3.6.1.4.1.30932.1.10.1.1.8.2.31	INTEGER	read-write	Enable/Disable notification of SecureArray events in an email.
trapRouting	1.3.6.1.4.1.30932.1.10.1.1.8.3
INT trapBranchCritLowVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.3.1	INTEGER	read-write	Enable/Disable notification of Critical Low Voltage on the Branch in a trap.
INT trapBranchWarnLowVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.3.2	INTEGER	read-write	Enable/Disable notification of Warning Low Voltage on the Branch in a trap.
INT trapBranchWarnHighVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.3.3	INTEGER	read-write	Enable/Disable notification of Warning High Voltage on the Branch in a trap.
INT trapBranchCritHighVoltage	1.3.6.1.4.1.30932.1.10.1.1.8.3.4	INTEGER	read-write	Enable/Disable notification of Critical High Voltage on the Branch in a trap.
INT trapBranchCritLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.5	INTEGER	read-write	Enable/Disable notification of Critical Low Current on the Branch in a trap.
INT trapBranchWarnLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.6	INTEGER	read-write	Enable/Disable notification of Warning Low Current on the Branch in a trap.
INT trapBranchWarnHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.7	INTEGER	read-write	Enable/Disable notification of Warning High Current on the Branch in a trap.
INT trapBranchCritHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.8	INTEGER	read-write	Enable/Disable notification of Critical High Current on the Branch in a trap.
INT trapOutletCritLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.9	INTEGER	read-write	Enable/Disable notification of Critical Low Current on the Outlet in a trap.
INT trapOutletWarnLowCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.10	INTEGER	read-write	Enable/Disable notification of Warning Low Current on the Outlet in a trap.
INT trapOutletWarnHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.11	INTEGER	read-write	Enable/Disable notification of Warning High Current on the Outlet in a trap.
INT trapOutletCritHighCurrent	1.3.6.1.4.1.30932.1.10.1.1.8.3.12	INTEGER	read-write	Enable/Disable notification of Critical High Current in a trap.
INT trapTempCritLow	1.3.6.1.4.1.30932.1.10.1.1.8.3.13	INTEGER	read-write	Enable/Disable notification of Critical Low Temperature in a trap.
INT trapTempWarnLow	1.3.6.1.4.1.30932.1.10.1.1.8.3.14	INTEGER	read-write	Enable/Disable notification of Warning Low Temperature in a trap.
INT trapTempWarnHigh	1.3.6.1.4.1.30932.1.10.1.1.8.3.15	INTEGER	read-write	Enable/Disable notification of Warning High Temperature in a trap.
INT trapTempCritHigh	1.3.6.1.4.1.30932.1.10.1.1.8.3.16	INTEGER	read-write	Enable/Disable notification of Critical High Temperature in a trap.
INT trapHumidCritLow	1.3.6.1.4.1.30932.1.10.1.1.8.3.17	INTEGER	read-write	Enable/Disable notification of Critical Low Humidity in a trap.
INT trapHumidWarnLow	1.3.6.1.4.1.30932.1.10.1.1.8.3.18	INTEGER	read-write	Enable/Disable notification of Warning Low Humidity in a trap.
INT trapHumidWarnHigh	1.3.6.1.4.1.30932.1.10.1.1.8.3.19	INTEGER	read-write	Enable/Disable notification of Warning High Humidity in a trap.
INT trapHumidCritHigh	1.3.6.1.4.1.30932.1.10.1.1.8.3.20	INTEGER	read-write	Enable/Disable notification of Critical High Humidity in a trap.
INT trapScanPass	1.3.6.1.4.1.30932.1.10.1.1.8.3.21	INTEGER	read-write	Enable/Disable notification of successful card ID scans in a trap.
INT trapScanFail	1.3.6.1.4.1.30932.1.10.1.1.8.3.22	INTEGER	read-write	Enable/Disable notification of failed card ID scans in a trap.
INT trapDoorState	1.3.6.1.4.1.30932.1.10.1.1.8.3.23	INTEGER	read-write	Enable/Disable notification of Door Open/Closed events in a trap.
INT trapLockState	1.3.6.1.4.1.30932.1.10.1.1.8.3.24	INTEGER	read-write	Enable/Disable notification of Lock Open/Closed events in a trap.
INT trapExtendedOpen	1.3.6.1.4.1.30932.1.10.1.1.8.3.25	INTEGER	read-write	Enable/Disable notification of extended door open events in an trap.
INT trapFirmareUpdate	1.3.6.1.4.1.30932.1.10.1.1.8.3.26	INTEGER	read-write	Enable/Disable notification of Firmare Update events in a trap.
INT trapConfigUpdate	1.3.6.1.4.1.30932.1.10.1.1.8.3.27	INTEGER	read-write	Enable/Disable notification of configuration change events in a trap.
INT trapRecepChange	1.3.6.1.4.1.30932.1.10.1.1.8.3.28	INTEGER	read-write	Enable/Disable notification of receptacle change events in a trap.
INT trapSystem	1.3.6.1.4.1.30932.1.10.1.1.8.3.29	INTEGER	read-write	Enable/Disable notification of system events in a trap.
INT trapPduAccess	1.3.6.1.4.1.30932.1.10.1.1.8.3.30	INTEGER	read-write	Enable/Disable notification of access to PDU events in a trap.
INT trapSecureArray	1.3.6.1.4.1.30932.1.10.1.1.8.3.31	INTEGER	read-write	Enable/Disable notification of SecureArray events in a trap.
systemInfo	1.3.6.1.4.1.30932.1.10.1.2
U32 cpiPduTableCount	1.3.6.1.4.1.30932.1.10.1.2.1	Unsigned32	read-only	Get the number of PDUs being monitored by this PDU. This is the number of entries in the cpiPduTable.
cpiPduTable	1.3.6.1.4.1.30932.1.10.1.2.10		not-accessible	This table contains a list of PDU entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored. Each row in the table represents a PDU in the daisy chain. This table always contains at least one entry and a maximum of 32 entries. The MAC address is used as an index on the table to allow data collectors to ensure that information can be retrieved for a specific PDU.
cpiPduEntry	1.3.6.1.4.1.30932.1.10.1.2.10.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduTable'. Each column represents an attribute of a PDU. This table is indexed by the PDU MAC that is globally unique.
MAC cpiPduMac	1.3.6.1.4.1.30932.1.10.1.2.10.1.1	MacAddress	read-only	Get the MAC address of the PDU.
STR cpiPduModel	1.3.6.1.4.1.30932.1.10.1.2.10.1.2	DisplayString	read-only	Get the model number of the PDU.
STR cpiPduName	1.3.6.1.4.1.30932.1.10.1.2.10.1.3	DisplayString	read-write	Set or get the user assigned name of the PDU.
STR cpiPduDescription	1.3.6.1.4.1.30932.1.10.1.2.10.1.4	DisplayString	read-write	Set or get the user assigned description of the PDU.
INT cpiPduHasBranchMonitor	1.3.6.1.4.1.30932.1.10.1.2.10.1.5	INTEGER	read-only	An indicator if the PDU supports monitoring voltage, and current on branches in the PDU.
INT cpiPduHasOutletMonitor	1.3.6.1.4.1.30932.1.10.1.2.10.1.6	INTEGER	read-only	An indicator if the PDU supports monitoring current on the individual outlets in the PDU.
INT cpiPduHasOutletControl	1.3.6.1.4.1.30932.1.10.1.2.10.1.7	INTEGER	read-only	An indicator if the PDU supports control (turn on/off) individual outlets in the PDU.
I32 cpiPduNumberBranches	1.3.6.1.4.1.30932.1.10.1.2.10.1.8	Integer32	read-only	Get the number of branches (breakers) in the PDU.
I32 cpiPduNumberOutlets	1.3.6.1.4.1.30932.1.10.1.2.10.1.9	Integer32	read-only	Get the number of outlets in the PDU.
INT cpiPduOutOfService	1.3.6.1.4.1.30932.1.10.1.2.10.1.10	INTEGER	read-write	Set or get whether the PDU is in-service.
STR cpiPduVersion	1.3.6.1.4.1.30932.1.10.1.2.10.1.11	DisplayString	read-only	Get the firmware version number of the PDU.
INT cpiPduUpgrade	1.3.6.1.4.1.30932.1.10.1.2.10.1.12	INTEGER	read-only	An indicator if the PDU firmware is being upgraded.
INT cpiPduChainRole	1.3.6.1.4.1.30932.1.10.1.2.10.1.13	INTEGER	read-write	Get the role of the PDU in a daisy chain.
IP cpiPduIp	1.3.6.1.4.1.30932.1.10.1.2.10.1.14	IpAddress	read-only	Get IP address of the PDU.
STR cpiPduIpv6	1.3.6.1.4.1.30932.1.10.1.2.10.1.15	DisplayString	read-only	Get the IPv6 address of the PDU.
I32 cpiPduTotalPower	1.3.6.1.4.1.30932.1.10.1.2.10.1.16	Integer32	read-only	Get the power in volt-amps for the entire PDU.
STR cpiPduCabinetId	1.3.6.1.4.1.30932.1.10.1.2.10.1.17	DisplayString	read-only	Get/set the name of the cabinet the PDU is in.
STR cpiPduSerialNum	1.3.6.1.4.1.30932.1.10.1.2.10.1.18	DisplayString	read-only	Get the serial number of the PDU.
branch	1.3.6.1.4.1.30932.1.10.1.3
U32 cpiLineTableCount	1.3.6.1.4.1.30932.1.10.1.3.1	Unsigned32	read-only	Get the number of PDU input lines being monitored by this PDU. This is the number of entries in the cpiLineTable and accounts for all input lines in a daisy chain.
cpiPduLineTable	1.3.6.1.4.1.30932.1.10.1.3.10		not-accessible	This table contains a list of PDU line entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored and the number of input lines. Each row in the table represents a PDU line in the daisy chain. The table is indexed based on the corresponding Line Input ID and the source PDU MAC.
cpiPduLineEntry	1.3.6.1.4.1.30932.1.10.1.3.10.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduLineTable'. Each column represents an attribute of a PDU. This table is indexed by the PDU Line identifier that is unique within the PDU.
MAC cpiPduLineMac	1.3.6.1.4.1.30932.1.10.1.3.10.1.1	MacAddress	read-only	Get the MAC address of the PDU that owns the input line.
I32 cpiPduLineId	1.3.6.1.4.1.30932.1.10.1.3.10.1.2	Integer32	read-only	Get the ID of the input line on the PDU.
I32 cpiPduLineCurrent	1.3.6.1.4.1.30932.1.10.1.3.10.1.3	Integer32	read-only	Get current draw in 1/100 amp of the line on the PDU. Convert the value by dividing by 100.
U32 cpiBranchTableCount	1.3.6.1.4.1.30932.1.10.1.3.100	Unsigned32	read-only	Get the number of PDU branches being monitored by this PDU. This is the number of entries in the cpiPduBranchTable.
cpiPduBranchTable	1.3.6.1.4.1.30932.1.10.1.3.110		not-accessible	This table contains a list of PDU branch entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored and the number of branches per PDU. Each row in the table represents a PDU branch in the daisy chain. The table is indexed based on the corresponding Branch ID and the source PDU MAC.
cpiPduBranchEntry	1.3.6.1.4.1.30932.1.10.1.3.110.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduBranchTable'. Each column represents an attribute of a PDU. This table is indexed by the PDU Line identifier that is unique within the PDU.
MAC cpiPduBranchMac	1.3.6.1.4.1.30932.1.10.1.3.110.1.1	MacAddress	read-only	Get the MAC address of the PDU that owns the branch.
I32 cpiPduBranchId	1.3.6.1.4.1.30932.1.10.1.3.110.1.2	Integer32	read-only	Get the ID of the branch on the owning PDU.
I32 cpiPduBranchCurrent	1.3.6.1.4.1.30932.1.10.1.3.110.1.3	Integer32	read-only	Get the current draw in 1/100 amp of the branch on the PDU. Convert the value by dividing by 100.
I32 cpiPduBranchMaxCurrent	1.3.6.1.4.1.30932.1.10.1.3.110.1.4	Integer32	read-only	Get the maximum current draw in 1/100 amp of the branch on the PDU. Convert the value by dividing by 100.
I32 cpiPduBranchVoltage	1.3.6.1.4.1.30932.1.10.1.3.110.1.5	Integer32	read-only	Get the voltage in 1/10 volts of the branch on the PDU. Convert the value by dividing by 10.
I32 cpiPduBranchPower	1.3.6.1.4.1.30932.1.10.1.3.110.1.6	Integer32	read-only	Get the power in volt-amps for the branch.
I32 cpiPduBranchPowerFactor	1.3.6.1.4.1.30932.1.10.1.3.110.1.7	Integer32	read-only	Get the power factor for the branch.
INT cpiPduBranchStatus	1.3.6.1.4.1.30932.1.10.1.3.110.1.8	INTEGER	read-only	Get the alarm status of the branch.
C64 cpiPduBranchEnergy	1.3.6.1.4.1.30932.1.10.1.3.110.1.9	Counter64	read-only	Get the branch energy accumulated in decaVA-secs, divide by 360 to obtain VA-hr.
cpiPduBranchAlertTable	1.3.6.1.4.1.30932.1.10.1.3.210		not-accessible	This table contains a list of PDU branch alert entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored and the number of branches per PDU. Each row in the table represents a PDU branch in the daisy chain. The table is indexed based on the corresponding Branch ID and the source PDU MAC.
cpiPduBranchAlertEntry	1.3.6.1.4.1.30932.1.10.1.3.210.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduBranchAlertTable'. Each column represents an alert attribute of a PDU. This table is indexed by the PDU Line identifier that is unique within the PDU.
MAC cpiPduBranchAlertMac	1.3.6.1.4.1.30932.1.10.1.3.210.1.1	MacAddress	read-only	Get the MAC address of the PDU.
I32 cpiPduBranchAlertBranchId	1.3.6.1.4.1.30932.1.10.1.3.210.1.2	Integer32	read-only	Get the branch ID on the PDU.
I32 cpiPduBranchAlertWarnLoCurrent	1.3.6.1.4.1.30932.1.10.1.3.210.1.3	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU that triggers a warning condition. Convert the value by dividing by 100.
I32 cpiPduBranchAlertWarnHiCurrent	1.3.6.1.4.1.30932.1.10.1.3.210.1.4	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU that triggers a warning condition. Convert the value by dividing by 100.
I32 cpiPduBranchAlertLoCurrent	1.3.6.1.4.1.30932.1.10.1.3.210.1.5	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU that triggers an alarm condition. Convert the value by dividing by 100.
I32 cpiPduBranchAlertHiCurrent	1.3.6.1.4.1.30932.1.10.1.3.210.1.6	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU, that triggers an alarm condition. Convert the value by dividing by 100.
I32 cpiPduBranchAlertCriticalCurrent	1.3.6.1.4.1.30932.1.10.1.3.210.1.7	Integer32	read-write	Set or get the critical current draw in 1/100 amp of the branch on the PDU. Convert the value by dividing by 100.
I32 cpiPduBranchAlertWarnLoVolt	1.3.6.1.4.1.30932.1.10.1.3.210.1.8	Integer32	read-write	Set or get the minimum voltage that the branch can reach up to in 1/10th volts, 0=ignore. Convert the value by dividing by 10.
I32 cpiPduBranchAlertWarnHiVolt	1.3.6.1.4.1.30932.1.10.1.3.210.1.9	Integer32	read-write	Set or get the maximum voltage that the branch can reach up to in 1/10th volts, 0=ignore. Convert the value by dividing by 10.
I32 cpiPduBranchAlertLoVolt	1.3.6.1.4.1.30932.1.10.1.3.210.1.10	Integer32	read-write	Set or get the minimum voltage that the branch can reach up to in 1/10th volts, 0=ignore. Convert the value by dividing by 10.
I32 cpiPduBranchAlertHiVolt	1.3.6.1.4.1.30932.1.10.1.3.210.1.11	Integer32	read-write	Set or get the maximum voltage that the branch can reach up to in 1/10th volts, 0=ignore. Convert the value by dividing by 10.
U32 cpiPduBranchAlertIndex	1.3.6.1.4.1.30932.1.10.1.3.210.1.12	Unsigned32	read-only	Index for branch aler
U32 cpiPduBranchAlertEntryCpiPduBranchAlertIndex	1.3.6.1.4.1.30932.1.10.1.3.210.1.13	Unsigned32	read-only	Index for branch alert.
outlet	1.3.6.1.4.1.30932.1.10.1.4
U32 cpiOutletTableCount	1.3.6.1.4.1.30932.1.10.1.4.1	Unsigned32	read-only	Get the number of PDU outlets being monitored by this PDU. This is the number of entries in the cpiPduOutletTable.
cpiPduOutletTable	1.3.6.1.4.1.30932.1.10.1.4.10		not-accessible	This table contains a list of PDU outlet entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored and the number of outlets on each PDU. Each row in the table represents a PDU outlet in the daisy chain. The table is indexed based on the corresponding Outlet ID and the source PDU MAC.
cpiPduOutletEntry	1.3.6.1.4.1.30932.1.10.1.4.10.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduOutletTable'. Each column represents an outlet of a PDU. This table is indexed by the PDU Outlet identifier that is unique within the PDU.
MAC cpiPduOutletMac	1.3.6.1.4.1.30932.1.10.1.4.10.1.1	MacAddress	read-only	Get the MAC address of the source PDU.
I32 cpiPduOutletId	1.3.6.1.4.1.30932.1.10.1.4.10.1.2	Integer32	read-only	Get the ID of the outlet on the PDU.
I32 cpiPduOutletBranchId	1.3.6.1.4.1.30932.1.10.1.4.10.1.3	Integer32	read-only	Get the ID of the branch the outlet is associated with on the PDU.
STR cpiPduOutletName	1.3.6.1.4.1.30932.1.10.1.4.10.1.4	DisplayString	read-write	Set or get the user supplied name of the outlet on the PDU.
STR cpiPduOutletDescription	1.3.6.1.4.1.30932.1.10.1.4.10.1.5	DisplayString	read-write	Set or get the user supplied description of the outlet on the PDU.
I32 cpiPduOutletCurrent	1.3.6.1.4.1.30932.1.10.1.4.10.1.6	Integer32	read-only	Get the current draw in 1/100 amp of the outlet on the PDU. Convert the value by dividing by 100.
I32 cpiPduOutletVoltage	1.3.6.1.4.1.30932.1.10.1.4.10.1.7	Integer32	read-only	Get the voltage in 1/10 volts of the outlet on the PDU. Convert the value by dividing by 10.
I32 cpiPduOutletPower	1.3.6.1.4.1.30932.1.10.1.4.10.1.8	Integer32	read-only	The power in Volt-Amps of the outlet on the PDU.
INT cpiPduOutletStatus	1.3.6.1.4.1.30932.1.10.1.4.10.1.9	INTEGER	read-only	Get the alarm status of the outlet.
C64 cpiPduOutletEnergy	1.3.6.1.4.1.30932.1.10.1.4.10.1.10	Counter64	read-only	Get the outlet energy accumulated in decaWatt-secs, divide by 360 to obtain Watt-hr.
INT cpiPduOutletControl	1.3.6.1.4.1.30932.1.10.1.4.10.1.11	INTEGER	read-write	Set or get power control to the outlet.
INT cpiPduOutletReset	1.3.6.1.4.1.30932.1.10.1.4.10.1.12	INTEGER	read-write	Set or get reset power to the outlet.
cpiPduOutletConfigTable	1.3.6.1.4.1.30932.1.10.1.4.210		not-accessible	This table contains a list of PDU outlet configuration entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored and the number of outlets per PDU. Each row in the table represents a PDU outlet in the daisy chain. The table is indexed based on the corresponding Outlet ID and the source PDU MAC.
cpiPduOutletConfigEntry	1.3.6.1.4.1.30932.1.10.1.4.210.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduOutletConfigTable'. Each column represents an configurable attribute of an outlet in the PDU. This table is indexed by the PDU Line identifier that is unique within the PDU.
MAC cpiPduOutletConfigMac	1.3.6.1.4.1.30932.1.10.1.4.210.1.1	MacAddress	read-only	Get the MAC address of the PDU.
I32 cpiPduOutletConfigOutletId	1.3.6.1.4.1.30932.1.10.1.4.210.1.2	Integer32	read-only	Get the ID of the outlet on the PDU.
I32 cpiPduOutletConfigOnDelay	1.3.6.1.4.1.30932.1.10.1.4.210.1.3	Integer32	read-write	Set or get the outlet power-on delay in seconds.
I32 cpiPduOutletConfigResetDelay	1.3.6.1.4.1.30932.1.10.1.4.210.1.4	Integer32	read-write	Set or get the outlet reset delay in seconds.
cpiPduOutletAlertTable	1.3.6.1.4.1.30932.1.10.1.4.310		not-accessible	This table contains a list of PDU outlet alert entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of PDUs being monitored and the number of outlets per PDU. Each row in the table represents a PDU outlet in the daisy chain. The table is indexed based on the corresponding Outlet ID and the source PDU MAC.
cpiPduOutletAlertEntry	1.3.6.1.4.1.30932.1.10.1.4.310.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduOutletAlertTable'. Each column represents an alert attribute of a PDU. This table is indexed by the PDU Line identifier that is unique within the PDU.
MAC cpiPduOutletAlertMac	1.3.6.1.4.1.30932.1.10.1.4.310.1.1	MacAddress	read-only	Get the MAC address of the PDU.
STR cpiPduOutletAlertOutletId	1.3.6.1.4.1.30932.1.10.1.4.310.1.2	DisplayString	read-only	Get the outlet ID on the PDU.
I32 cpiPduOutletAlertWarnLoCurrent	1.3.6.1.4.1.30932.1.10.1.4.310.1.3	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU that triggers a warning condition. Convert the value by dividing by 100.
I32 cpiPduOutletAlertWarnHiCurrent	1.3.6.1.4.1.30932.1.10.1.4.310.1.4	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU that triggers a warning condition. Convert the value by dividing by 100.
I32 cpiPduOutletAlertLoCurrent	1.3.6.1.4.1.30932.1.10.1.4.310.1.5	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU that triggers an alarm condition. Convert the value by dividing by 100.
I32 cpiPduOutletAlertHiCurrent	1.3.6.1.4.1.30932.1.10.1.4.310.1.6	Integer32	read-write	Set or get the current draw in 1/100 amp of the branch on the PDU, that triggers an alarm condition. Convert the value by dividing by 100.
I32 cpiPduOutletAlertCriticalCurrent	1.3.6.1.4.1.30932.1.10.1.4.310.1.7	Integer32	read-write	Set or get the critical current draw in 1/100 amp of the outlet on the PDU. Convert the value by dividing by 100.
sensors	1.3.6.1.4.1.30932.1.10.1.5
U32 cpiPduSensorCount	1.3.6.1.4.1.30932.1.10.1.5.1	Unsigned32	read-only	Get the number of PDU sensors being monitored by this PDU. This is the number of entries in the cpiPduSensorTable.
cpiPduProbeTable	1.3.6.1.4.1.30932.1.10.1.5.5		not-accessible	This table contains a list of PDU probes that are being monitored by the PDU. The table contains zero, one, or many rows, depending upon the number of PDUs being monitored and the number of probes attached to the PDUs in the daisy chain. Each row in the table represents a probe in the daisy chain. The table is index based on the corresponding Probe ID and the source PDU MAC.
cpiPduProbeEntry	1.3.6.1.4.1.30932.1.10.1.5.5.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduProbeTable'. Each column represents an attribute of a PDU probe. This table is indexed by the PDU identifier that is unique within the PDU and the probe ID.
MAC cpiPduProbeMac	1.3.6.1.4.1.30932.1.10.1.5.5.1.1	MacAddress	read-only	Get the MAC address of the PDU.
I32 cpiPduProbeId	1.3.6.1.4.1.30932.1.10.1.5.5.1.2	Integer32	read-only	Get the probe ID on the PDU.
STR cpiPduProbeName	1.3.6.1.4.1.30932.1.10.1.5.5.1.3	DisplayString	read-write	Set or get the user defined name of the probe.
cpiPduSensorTable	1.3.6.1.4.1.30932.1.10.1.5.10		not-accessible	This table contains a list of PDU sensor entries that are being monitored by the PDU. The table contains zero, one, or many rows, depending upon the number of PDUs being monitored and the number of sensors attached to the PDUs in the daisy chain. Each row in the table represents a sensor in the daisy chain. The table is index based on the corresponding Sensor ID and the source PDU MAC.
cpiPduSensorEntry	1.3.6.1.4.1.30932.1.10.1.5.10.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduSensorTable'. Each column represents an attribute of a PDU sensor. This table is indexed by the PDU identifier that is unique within the PDU and the sensor ID.
MAC cpiPduSensorMac	1.3.6.1.4.1.30932.1.10.1.5.10.1.1	MacAddress	read-only	Get the MAC address of the PDU.
I32 cpiPduSensorId	1.3.6.1.4.1.30932.1.10.1.5.10.1.2	Integer32	read-only	Get the sensor ID on the PDU.
STR cpiPduSensorName	1.3.6.1.4.1.30932.1.10.1.5.10.1.3	DisplayString	read-only	Set or get the user defined name of the sensor.
INT cpiPduSensorType	1.3.6.1.4.1.30932.1.10.1.5.10.1.4	INTEGER	read-only	Get the type of sensor for the entry.
I32 cpiPduSensorValue	1.3.6.1.4.1.30932.1.10.1.5.10.1.5	Integer32	read-only	Get the value of the sensor. For temperature the value is in degrees Fahrenheit and for humidity the value is percent humidity.
cpiPduSensorAlertTable	1.3.6.1.4.1.30932.1.10.1.5.110		not-accessible	This table contains a list of PDU sensor alert entries that are being monitored by the PDU. The table contains zero, one, or many rows, depending upon the number of PDUs being monitored and the number of sensors attached to the PDUs in the daisy chain. Each row in the table represents a sensor in the daisy chain. The table is index based on the corresponding Sonsor ID and the source PDU MAC.
cpiPduSensorAlertEntry	1.3.6.1.4.1.30932.1.10.1.5.110.1		not-accessible	This entry defines the columns to be populated in the 'cpiPduSensorAlertTable'. Each column represents an attribute of a PDU sensor alert. This table is indexed by the PDU identifier that is unique within the PDU.
MAC cpiPduSensorAlertMac	1.3.6.1.4.1.30932.1.10.1.5.110.1.1	MacAddress	read-only	Get the MAC address of the PDU.
I32 cpiPduSensorAlertSensorId	1.3.6.1.4.1.30932.1.10.1.5.110.1.2	Integer32	read-only	Get the id of the sensor.
I32 cpiPduSensorAlertWarnMin	1.3.6.1.4.1.30932.1.10.1.5.110.1.3	Integer32	read-write	Set or get the minimum warning value of the sensor.
I32 cpiPduSensorAlertWarnMax	1.3.6.1.4.1.30932.1.10.1.5.110.1.4	Integer32	read-write	Set or get the maximum warning value of the sensor.
I32 cpiPduSensorAlertMin	1.3.6.1.4.1.30932.1.10.1.5.110.1.5	Integer32	read-write	Set or get the minimum alarm value of the sensor.
I32 cpiPduSensorAlertMax	1.3.6.1.4.1.30932.1.10.1.5.110.1.6	Integer32	read-write	Set or get the maximum alarm value of the sensor.
group	1.3.6.1.4.1.30932.1.10.1.6
U32 cpiPduGroupCount	1.3.6.1.4.1.30932.1.10.1.6.1	Unsigned32	read-only	Get the number of supported groups by the PDU. Value from 0 to 16.
U32 cpiPduGroupOutletCount	1.3.6.1.4.1.30932.1.10.1.6.2	Unsigned32	read-only	Get the number of outlets in the Group Outlet Table.
cpiGroupTable	1.3.6.1.4.1.30932.1.10.1.6.10		not-accessible	This table contains a list of PDU group entries that are being monitored by the PDU. The table contains one, or many rows, depending upon the number of groups that have been configured. Each row in the table represents a group.
cpiGroupEntry	1.3.6.1.4.1.30932.1.10.1.6.10.1		not-accessible	This entry defines the columns to be populated in the 'cpiGroupTable'. This table is indexed by the group identifier that is unique within the PDU.
U32 cpiGroupEntryIndex	1.3.6.1.4.1.30932.1.10.1.6.10.1.1	Unsigned32	read-only	This is the index that indicates the row of the 'cpiPduTable'.
STR cpiGroupName	1.3.6.1.4.1.30932.1.10.1.6.10.1.2	DisplayString	read-write	Name for GROUP 1 of receptacles.
cpiGroupOutletTable	1.3.6.1.4.1.30932.1.10.1.6.20		not-accessible	This table contains a list of PDU group entries. The table contains zero, one, or many rows, depending upon the number of groups that have been configured. Each row in the table represents a group.
cpiGroupOutletEntry	1.3.6.1.4.1.30932.1.10.1.6.20.1		not-accessible	This entry defines the columns to be populated in the 'cpiGroupTable'. This table is indexed by the group identifier that is unique within the PDU.
U32 cpiGroupOutletEntryIndex	1.3.6.1.4.1.30932.1.10.1.6.20.1.1	Unsigned32	read-only	This is the index that indicates the row of the 'cpiGroupOutletTable'.
U32 cpiGroupOutletGroupID	1.3.6.1.4.1.30932.1.10.1.6.20.1.2	Unsigned32	read-only	Name for GROUP 1 of receptacles.
MAC cpiGroupOutletPDUMac	1.3.6.1.4.1.30932.1.10.1.6.20.1.3	MacAddress	read-write	MAC of PDU the outlet is on.
I32 cpiGroupOutletOutletId	1.3.6.1.4.1.30932.1.10.1.6.20.1.4	Integer32	read-write	The ID of the outlet on the PDU.
easData	1.3.6.1.4.1.30932.1.10.1.7
U32 cpiEasCount	1.3.6.1.4.1.30932.1.10.1.7.1	Unsigned32	read-only	Get the number of locks connected to the PDU. This includes the PDUs on the daisy chain.
cpiEasConfigTable	1.3.6.1.4.1.30932.1.10.1.7.90		not-accessible	This table contains a list of electronic locks that are connected to the PDU and allows for the configuration of the various settings associated with the EAS (electronic access system). The table contains zero, one, or many rows, depending upon the number of PDUs being monitored and the number of locks attached to the PDUs in the daisy chain. Each row in the table represents a lock in the daisy chain. The table is index based on the corresponding lock ID and the source PDU MAC.
cpiEasConfigEntry	1.3.6.1.4.1.30932.1.10.1.7.90.1		not-accessible	This entry defines the columns to be populated in the 'cpiEasTable'. Each column represents an attribute of a PDU lock. This table is indexed by the PDU identifier that is unique within the PDU and the lock ID.
MAC cpiEasConfigLockMac	1.3.6.1.4.1.30932.1.10.1.7.90.1.1	MacAddress	read-only	Get the MAC address of the PDU.
INT cpiEasConfigEnabled	1.3.6.1.4.1.30932.1.10.1.7.90.1.2	INTEGER	read-only	Indicates whether the Electronic Access System (EAS) is available on the PDU.
INT cpiEasFrontLockEnabled	1.3.6.1.4.1.30932.1.10.1.7.90.1.3	INTEGER	read-write	Enables the front lock on the EAS.
INT cpiEasRearLockEnabled	1.3.6.1.4.1.30932.1.10.1.7.90.1.4	INTEGER	read-write	Enables the rear lock on the EAS.
INT cpiEasLockHoldOpenTime	1.3.6.1.4.1.30932.1.10.1.7.90.1.5	INTEGER	read-write	The length of time in seconds to hold open the lock after a successful card scan.
INT cpiEasDoorOpenAlarmTime	1.3.6.1.4.1.30932.1.10.1.7.90.1.6	INTEGER	read-write	The length of time in minutes before alerting that the door is open.
cpiEasTable	1.3.6.1.4.1.30932.1.10.1.7.100		not-accessible	This table contains a list of electronic locks that are connected to the PDU The table contains zero, one, or many rows, depending upon the number of PDUs being monitored and the number of locks attached to the PDUs in the daisy chain. Each row in the table represents a lock in the daisy chain. The table is index based on the corresponding lock ID and the source PDU MAC.
cpiEasEntry	1.3.6.1.4.1.30932.1.10.1.7.100.1		not-accessible	This entry defines the columns to be populated in the 'cpiEasTable'. Each column represents an attribute of a PDU lock. This table is indexed by the PDU identifier that is unique within the PDU and the lock ID.
MAC cpiPduLockMac	1.3.6.1.4.1.30932.1.10.1.7.100.1.1	MacAddress	read-only	Get the MAC address of the PDU.
INT cpiPduLockId	1.3.6.1.4.1.30932.1.10.1.7.100.1.2	INTEGER	read-only	Get the lock ID on the PDU.
INT cpiPduEasStatus	1.3.6.1.4.1.30932.1.10.1.7.100.1.3	INTEGER	read-only	Indicates if the Electronic Access Control system is ready, inactive, or in an error state. If the status is Inactive, then the lock is not enabled on the PDU. If the status is Error, then the cpiEasError field will have an error code to help diagnose the issue. If the status is Ready, then the lock at the door is enabled and ready.
INT cpiPduDoorStatus	1.3.6.1.4.1.30932.1.10.1.7.100.1.4	INTEGER	read-only	Indicates if the door sensor is closed or open.
INT cpiPduLockStatus	1.3.6.1.4.1.30932.1.10.1.7.100.1.5	INTEGER	read-only	Indicates if the lock is closed or open.
INT cpiPduForceStatus	1.3.6.1.4.1.30932.1.10.1.7.100.1.6	INTEGER	read-only	Indicates if the cabinet was forced open by a command from the webUI or SNMP interfaces.
INT cpiPduTamperStatus	1.3.6.1.4.1.30932.1.10.1.7.100.1.7	INTEGER	read-only	Indicates if the cabinet is currently unlocked/opened without an authorization scan.
U32 cpiEasError	1.3.6.1.4.1.30932.1.10.1.7.100.1.8	Unsigned32	read-only	Gets the error code associated for the electronic lock system. The possible error codes are: 196608 (0x00030000 ) - No error, the lock is working and ready. 167968771 (0x0a030003 ) - The lock is not enabled. Enable the lock through the cpiEasConfigTable. 167837698 (0x0a010002 ) - The lock is not responding. Ensure that the lock is connected to the PDU, and is recieving power. Try to disable and re-enable the lock in the cpiEasConfigTable.
STR cpiEasLockVer	1.3.6.1.4.1.30932.1.10.1.7.100.1.9	DisplayString	read-only	Gets the version of the electronic lock control.
STR cpiEasLockSerialNumber	1.3.6.1.4.1.30932.1.10.1.7.100.1.10	DisplayString	read-only	Get the serial number of the electronic lock control.
INT cpiPduLockCtrl	1.3.6.1.4.1.30932.1.10.1.7.100.1.11	INTEGER	read-write	Tells the system to open the locks on the cabinet.
traps	1.3.6.1.4.1.30932.1.10.1.500
trapInformation	1.3.6.1.4.1.30932.1.10.1.500.0
STR trapInfoUserName	1.3.6.1.4.1.30932.1.10.1.500.0.1	DisplayString	not-accessible	The user Id associated with the action.
STR trapInfoCardId	1.3.6.1.4.1.30932.1.10.1.500.0.2	DisplayString	not-accessible	The card Id associated with the action.
STR trapInfoConfigName	1.3.6.1.4.1.30932.1.10.1.500.0.3	DisplayString	not-accessible	The configuration value that was changed.
INT trapInfoInterface	1.3.6.1.4.1.30932.1.10.1.500.0.4	INTEGER	not-accessible	An identifier for the affected interface.
OID trapInfoVarId	1.3.6.1.4.1.30932.1.10.1.500.0.5	OBJECT IDENTIFIER	not-accessible	An identifier for the value that was changed.
INT trapInfoBootType	1.3.6.1.4.1.30932.1.10.1.500.0.6	INTEGER	not-accessible	Indicates that type of boot up occurring. A Cold boot is done from a complete power off. A Warm boot was not a loss in power, but just a reboot of the control module.
I32 trapInfoProgress	1.3.6.1.4.1.30932.1.10.1.500.0.7	Integer32	not-accessible	Indicates the percent complete of an operation.
INT trapInfoResult	1.3.6.1.4.1.30932.1.10.1.500.0.8	INTEGER	not-accessible	Indicates the result of an operation.
INT trapInfoErrorCode	1.3.6.1.4.1.30932.1.10.1.500.0.9	INTEGER	not-accessible	Indicates the error code of an operation. See the operation for details. Firmware Update Operation Error Codes: 151060481 - Error: Insufficient space available on the PDU to complete the operation. 151060482 - Error: Too many packets were lost in the transfer process. Please try the operation again. 151060483 - Error: The firmware file is corrupted and can not be used. 151060484 - Error: There was a failure in writing the firmware data out to internal memory. 151060485 - Error: The firmware file could not be opened and processed correctly. 151060489 - Error: A unknown failure occured while performing a firmware upgrade. 151060490 - Info: A firmware update is in progress. No issue currently. 151191558 - Info: A firmware upgrade has completed and does not need to reboot. 151191559 - Info: A firmware upgrade has compelted and will reboot. 151191560 - Info: A firmware upgrade has compelted and it was not needed. PDU will not reboot.
STR trapInfoGroupName	1.3.6.1.4.1.30932.1.10.1.500.0.10	DisplayString	not-accessible	The user group Id associated with the action.
systemNotifications	1.3.6.1.4.1.30932.1.10.1.500.1
NTF systemConfigChangeAlert	1.3.6.1.4.1.30932.1.10.1.500.1.1			Notification that a configuration value was changed on the PDU.
NTF systemBootAlert	1.3.6.1.4.1.30932.1.10.1.500.1.2			Notification that a PDU is booting up.
NTF systemFWUpdateStartAlert	1.3.6.1.4.1.30932.1.10.1.500.1.3			Notification that a firmware update has been initiated.
NTF systemFWUpdateStatusAlert	1.3.6.1.4.1.30932.1.10.1.500.1.4			Notification that about the progress of the firmware update.
NTF systemFWUpdateCompleteAlert	1.3.6.1.4.1.30932.1.10.1.500.1.5			Notification that about the progress of the firmware update.
NTF systemSecureArrayFailoverAlert	1.3.6.1.4.1.30932.1.10.1.500.1.6			Notification that the SecureArray is being managed by the identified PDU.
NTF systemSecureArrayDisconnectAlert	1.3.6.1.4.1.30932.1.10.1.500.1.7			Notification that the specified PDU disconnected from the SecureArray.
NTF systemSecureArrayConnectAlert	1.3.6.1.4.1.30932.1.10.1.500.1.8			Notification that the specified PDU connected to the SecureArray.
NTF systemConfigCertAlert	1.3.6.1.4.1.30932.1.10.1.500.1.9			Notification that the HTTPS certificate was changed on the PDU.
userNotifications	1.3.6.1.4.1.30932.1.10.1.500.2
NTF userLoginAlert	1.3.6.1.4.1.30932.1.10.1.500.2.1			Notification that a user logged onto the PDU.
NTF userLoginFailAlert	1.3.6.1.4.1.30932.1.10.1.500.2.2			Notification that a user failed to log onto the PDU.
NTF userAddAlert	1.3.6.1.4.1.30932.1.10.1.500.2.3			Notification that a user was added to the PDU.
NTF userDeleteAlert	1.3.6.1.4.1.30932.1.10.1.500.2.4			Notification that a user was deleted from the PDU.
NTF userModifiedAlert	1.3.6.1.4.1.30932.1.10.1.500.2.5			Notification that a user was modified on the PDU.
NTF userGroupAddAlert	1.3.6.1.4.1.30932.1.10.1.500.2.6			Notification that a user group was added to the PDU.
NTF userGroupDeleteAlert	1.3.6.1.4.1.30932.1.10.1.500.2.7			Notification that a user group was deleted from the PDU.
NTF userGroupModifyAlert	1.3.6.1.4.1.30932.1.10.1.500.2.8			Notification that a user group was modified on the PDU.
inletNotifications	1.3.6.1.4.1.30932.1.10.1.500.3
branchNotifications	1.3.6.1.4.1.30932.1.10.1.500.4
outletNotifications	1.3.6.1.4.1.30932.1.10.1.500.5
NTF outletStateChangeAlert	1.3.6.1.4.1.30932.1.10.1.500.5.1			The outlet state has changed.
environNotification	1.3.6.1.4.1.30932.1.10.1.500.6
NTF environMaxTempAlert	1.3.6.1.4.1.30932.1.10.1.500.6.1			The temperature sensor reached the Maximum limit.
NTF environMinTempAlert	1.3.6.1.4.1.30932.1.10.1.500.6.2			The temperature sensor reached the minimum limit.
NTF environMaxHumidAlert	1.3.6.1.4.1.30932.1.10.1.500.6.3			The humidity sensor reached the maximum limit.
NTF environMinHumidAlert	1.3.6.1.4.1.30932.1.10.1.500.6.4			The humidity sensor reached the maximum limit.
NTF environMaxWarnTempAlert	1.3.6.1.4.1.30932.1.10.1.500.6.5			The temperature sensor reached the Maximum limit.
NTF environMinWarnTempAlert	1.3.6.1.4.1.30932.1.10.1.500.6.6			The temperature sensor reached the minimum limit.
NTF environMaxWarnHumidAlert	1.3.6.1.4.1.30932.1.10.1.500.6.7			The humidity sensor reached the maximum limit.
NTF environMinWarnHumidAlert	1.3.6.1.4.1.30932.1.10.1.500.6.8			The humidity sensor reached the maximum limit.
easNotification	1.3.6.1.4.1.30932.1.10.1.500.7
NTF easScanPassAlert	1.3.6.1.4.1.30932.1.10.1.500.7.1			A card was scanned and the associated user was authenticated and authorized to access the cabinet.
NTF easScanFailAlert	1.3.6.1.4.1.30932.1.10.1.500.7.2			A card was scanned but was not authenticated or authorized to access the cabinet.
NTF easDoorOpenAlert	1.3.6.1.4.1.30932.1.10.1.500.7.3			Notification that a door was opened.
NTF easDoorCloseAlert	1.3.6.1.4.1.30932.1.10.1.500.7.4			Notification that a door was closed.
NTF easLockOpenAlert	1.3.6.1.4.1.30932.1.10.1.500.7.5			Notification that a lock was opened.
NTF easLockCloseAlert	1.3.6.1.4.1.30932.1.10.1.500.7.6			Notification that a lock was closed.
NTF easDoorExtOpenAlert	1.3.6.1.4.1.30932.1.10.1.500.7.7			Notification that a door was open for longer that the time set in cpiEasDoorOpenAlarmTime setting.
NTF easDoorExtOpenClearAlert	1.3.6.1.4.1.30932.1.10.1.500.7.8			Notification that a door was open for longer that the time set in cpiEasDoorOpenAlarmTime setting.
NTF easForceUnlockAlert	1.3.6.1.4.1.30932.1.10.1.500.7.9			Notification that a door was open for longer that the time set in cpiEasDoorOpenAlarmTime setting.
mibconformance	1.3.6.1.4.1.30932.1.10.1.600

RFC description

Chatsworth eConnect unified MIB for power distribution units providing system information and monitoring.

Start monitoring Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CPI-UNITY-MIB