NETGEAR-RADIUS-AUTH-CLIENT-MIB

All MIBs › NETGEAR-RADIUS-AUTH-CLIENT-MIB

Organization: Netgear

Last Updated: 2008-03-17

Description: MIB for RADIUS authentication client settings, server tables, and retry parameters on Netgear NG700 smart switches

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-RADIUS-AUTH-CLIENT-MIB?

NETGEAR-RADIUS-AUTH-CLIENT-MIB is a private Netgear MIB for the RADIUS authentication client on NG700-series smart switches, covering configured RADIUS server settings and retry/timeout parameters used for authenticating management or network access. No sample objects were available in the provided source, so specific table/field names cannot be enumerated, but a RADIUS client MIB of this kind would typically expose server address, shared-secret reference, port, timeout, and retry-count objects, along with a server table for multiple configured RADIUS servers. Its monitoring relevance is in confirming authentication infrastructure configuration is correct and reachable, since RADIUS failures would affect the ability of users or devices to authenticate against the switch. It builds on the standard RADIUS protocol (RFC 2865) client model. It is deployed on Netgear NG700 smart switches using centralized RADIUS authentication for administrative or 802.1X network access, and a NETGEAR-RADIUS-AUTH-CLIENT-MIB download is available for import into standard SNMP management tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-RADIUS-AUTH-CLIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear NG700-series smart switch

Monitoring Examples

No sample objects were provided for this MIB, so a concrete object-level polling scenario cannot be constructed from the available material. In general, a RADIUS client MIB of this kind would be polled to verify configured server addresses and retry/timeout settings are correct, but specific object names are not confirmed here.

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From Netgear-MIB

ng700smartswitch

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
agentRadius	1.3.6.1.4.1.4526.11.8			The Netgear Private MIB for Radius Authentication Client
agentRadiusConfigGroup	1.3.6.1.4.1.4526.11.8.1
U32 agentRadiusMaxTransmit	1.3.6.1.4.1.4526.11.8.1.1	Unsigned32	read-write	Maximum number of retransmissions of a RADIUS request packet
U32 agentRadiusTimeout	1.3.6.1.4.1.4526.11.8.1.2	Unsigned32	read-write	Time out duration (in seconds) before packets are retransmitted
INT agentRadiusAccountingMode	1.3.6.1.4.1.4526.11.8.1.3	INTEGER	read-write	Identifies if RADIUS Accounting has been enabled or not
INT agentRadiusStatsClear	1.3.6.1.4.1.4526.11.8.1.4	INTEGER	read-write	When set to enable(1), all Radius statistics will be reset.
I32 agentRadiusAccountingIndexNextValid	1.3.6.1.4.1.4526.11.8.1.5	Integer32	read-only	Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusAccountingConfigTable	1.3.6.1.4.1.4526.11.8.1.6		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
agentRadiusAccountingConfigEntry	1.3.6.1.4.1.4526.11.8.1.6.1		not-accessible	Entry consisting of configuration data for a Radius Accounting Server.
I32 agentRadiusAccountingServerIndex	1.3.6.1.4.1.4526.11.8.1.6.1.1	Integer32	not-accessible	Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by agentRadiusAccountingIndexNextValid.
IP agentRadiusAccountingServerAddress	1.3.6.1.4.1.4526.11.8.1.6.1.2	InetAddress	read-create	IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
IPt agentRadiusAccountingServerAddressType	1.3.6.1.4.1.4526.11.8.1.6.1.3	InetAddressType	read-create	IP Address Type of the configured RADIUS accounting server. This object cannot be changed after creation.
U32 agentRadiusAccountingPort	1.3.6.1.4.1.4526.11.8.1.6.1.4	Unsigned32	read-write	Port number for the RADIUS accounting server.
STR agentRadiusAccountingSecret	1.3.6.1.4.1.4526.11.8.1.6.1.5	DisplayString	read-write	Configured shared sercret for the RADIUS accounting server.
ROW agentRadiusAccountingStatus	1.3.6.1.4.1.4526.11.8.1.6.1.6	RowStatus	read-create	Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the agentRadiusAccountingIndexNextValid object. Rows creation using a different value for agentRadiusAccountingServerIndex will fail. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry.
I32 agentRadiusServerIndexNextValid	1.3.6.1.4.1.4526.11.8.1.7	Integer32	read-only	Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusServerConfigTable	1.3.6.1.4.1.4526.11.8.1.8		not-accessible	Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret
agentRadiusServerConfigEntry	1.3.6.1.4.1.4526.11.8.1.8.1		not-accessible	Entry consisting of configuration data for a Radius Authentication Server.
I32 agentRadiusServerIndex	1.3.6.1.4.1.4526.11.8.1.8.1.1	Integer32	not-accessible	Unique index of the configured RADIUS server
IP agentRadiusServerAddress	1.3.6.1.4.1.4526.11.8.1.8.1.2	InetAddress	read-create	IP Address of the configured RADIUS server. This object cannot be changed after creation.
IPt agentRadiusServerAddressType	1.3.6.1.4.1.4526.11.8.1.8.1.3	InetAddressType	read-create	IP Address Type of the configured RADIUS server. This object cannot be changed after creation.
U32 agentRadiusServerPort	1.3.6.1.4.1.4526.11.8.1.8.1.4	Unsigned32	read-write	Port number for the RADIUS server.
STR agentRadiusServerSecret	1.3.6.1.4.1.4526.11.8.1.8.1.5	DisplayString	read-write	Configured shared sercret for the RADIUS server.
INT agentRadiusServerPrimaryMode	1.3.6.1.4.1.4526.11.8.1.8.1.6	INTEGER	read-write	Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary.
INT agentRadiusServerCurrentMode	1.3.6.1.4.1.4526.11.8.1.8.1.7	INTEGER	read-only	Indicate if the RADIUS server is the current server in user for authentication.
INT agentRadiusServerMsgAuth	1.3.6.1.4.1.4526.11.8.1.8.1.8	INTEGER	read-write	Enable or disable the message authenticator attribute for this RADIUS server.
ROW agentRadiusServerStatus	1.3.6.1.4.1.4526.11.8.1.8.1.9	RowStatus	read-create	Creates or destroys a RADIUS Authentication server entry. During creation, the next available index is specified by the agentRadiusServerIndexNextValid object. Rows creation using a different value for agentRadiusServerIndex will fail. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry.

RFC description

Configures RADIUS authentication client for Netgear smart switches.

Start monitoring Netgear NG700-series smart switch (RADIUS authentication client) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-RADIUS-AUTH-CLIENT-MIB

What Is NETGEAR-RADIUS-AUTH-CLIENT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description