CPI-UNITY-MIB :: cpiEasError

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › CPI-UNITY-MIB › cpiEasError

cpiEasError

Module: CPI-UNITY-MIB

OID (symbolic): CPI-UNITY-MIB::cpiEasError

OID (numeric): 1.3.6.1.4.1.30932.1.10.1.7.100.1.8

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Gets the error code associated for the electronic lock system. The possible error codes are:

196608 (0x00030000 ) - No error, the lock is working and ready. 167968771 (0x0a030003 ) - The lock is not enabled. Enable the lock through the cpiEasConfigTable. 167837698 (0x0a010002 ) - The lock is not responding. Ensure that the lock is connected to the PDU, and is recieving power. Try to disable and re-enable the lock in the cpiEasConfigTable.

What is cpiEasError?

This read-only Unsigned32 returns a specific numeric error code describing a fault in the electronic lock system, with documented codes such as 196608 meaning no error and the lock working, 167968771 meaning the lock is not enabled, and 167837698 meaning the lock is not responding. It gives an admin a precise diagnostic code to look up rather than a vague error flag, speeding up troubleshooting. If this returns 167837698, the admin knows to check that the lock hardware is physically connected to the PDU and receiving power, per the documented meaning of that code.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.30932.1.10.1.7.100.1.8
snmpwalk -v2c -c public <target> CPI-UNITY-MIB::cpiEasError

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.30932.1.10.1.7.100.1.8.1
snmpget -v2c -c public <target> CPI-UNITY-MIB::cpiEasError.1

Start monitoring Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPI-UNITY-MIB::cpiEasError OID value, configure state conditions and alerts, and monitor any Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.30932cpiCPI-UNITY-MIB
1.3.6.1.4.1.30932.1productsCPI-UNITY-MIB
1.3.6.1.4.1.30932.1.10unityCPI-UNITY-MIB
1.3.6.1.4.1.30932.1.10.1econnectCPI-UNITY-MIB
1.3.6.1.4.1.30932.1.10.1.7easDataCPI-UNITY-MIB
1.3.6.1.4.1.30932.1.10.1.7.100cpiEasTableCPI-UNITY-MIB
1.3.6.1.4.1.30932.1.10.1.7.100.1cpiEasEntryCPI-UNITY-MIB
1.3.6.1.4.1.30932.1.10.1.7.100.1.8cpiEasErrorCPI-UNITY-MIB