All MIBs › CPI-UNITY-MIB › maxHumidProbe2
maxHumidProbe2
Module: CPI-UNITY-MIB
OID (symbolic): CPI-UNITY-MIB::maxHumidProbe2
OID (numeric): 1.3.6.1.4.1.30932.1.1.2.36.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Maximum humidity for Probe 2 in 1/100 of %, 0=ignore.
What is maxHumidProbe2?
This read-write integer, in hundredths of a percent (0-10000, i.e. up to 100.00%) with 0 meaning the limit is disabled, sets the highest relative humidity reading allowed from humidity Probe 2 attached to this PDU. Excess humidity near Probe 2 raises the risk of condensation and corrosion on the equipment the PDU powers, so this ceiling lets an administrator catch that condition early. For example, setting maxHumidProbe2 to 8000 (80.00%) flags an alarm as soon as Probe 2 reads above 80 percent relative humidity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.30932.1.1.2.36.2 snmpwalk -v2c -c public <target> CPI-UNITY-MIB::maxHumidProbe2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.30932.1.1.2.36.2.1 snmpget -v2c -c public <target> CPI-UNITY-MIB::maxHumidProbe2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.30932.1.1.2.36.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> maxHumidProbe2.1
Start monitoring Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPI-UNITY-MIB::maxHumidProbe2 OID value, configure state conditions and alerts, and monitor any Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.30932 | cpi | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1 | products | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.1 | cpiPDU | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.1.2 | configuration | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.1.2.36 | maxHumidityLimits | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.1.2.36.2 | maxHumidProbe2 | CPI-UNITY-MIB |