All MIBs › CPI-UNITY-MIB › subnetMaskv6
subnetMaskv6
Module: CPI-UNITY-MIB
OID (symbolic): CPI-UNITY-MIB::subnetMaskv6
OID (numeric): 1.3.6.1.4.1.30932.1.10.1.1.1.2.7
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The subnet mask associated with the IPv6 address of this entry. The value of the mask is an IPv6 address with all the network bits set to 1 and all the hosts bits set to 0.
What is subnetMaskv6?
This read-write DisplayString holds the IPv6 subnet mask for the PDU's address, expressed as an IPv6-formatted value with the network bits set to 1 and the host bits set to 0, exactly as the object's description defines it. An admin configures this alongside ipv6PduIPv6 so the PDU correctly determines which addresses are on its local IPv6 segment versus which require routing through gatewayv6. For example, an admin setting up a /64 IPv6 segment enters the corresponding mask value into subnetMaskv6 so the PDU's IPv6 stack matches the site's addressing plan.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.30932.1.10.1.1.1.2.7 snmpwalk -v2c -c public <target> CPI-UNITY-MIB::subnetMaskv6
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.30932.1.10.1.1.1.2.7.1 snmpget -v2c -c public <target> CPI-UNITY-MIB::subnetMaskv6.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.30932.1.10.1.1.1.2.7.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> subnetMaskv6.1
Start monitoring Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPI-UNITY-MIB::subnetMaskv6 OID value, configure state conditions and alerts, and monitor any Chatsworth Products (CPI) eConnect rack PDU/cabinet management unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.30932 | cpi | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1 | products | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.10 | unity | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.10.1 | econnect | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.10.1.1 | econnectConfiguration | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.10.1.1.1 | network | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.10.1.1.1.2 | ipv6 | CPI-UNITY-MIB |
| 1.3.6.1.4.1.30932.1.10.1.1.1.2.7 | subnetMaskv6 | CPI-UNITY-MIB |