All MIBs › CISCOSB-IPV6FHS-MIB
Organization: Cisco Small Business
Last Updated: 2012-12-12
Category: IP and Core Protocols, Vendor: RADLAN/Cisco SB
Description: Manages Cisco Small Business IPv6 First Hop Security (FHS) features including RA Guard and DHCPv6 Guard.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCOSB-IPV6FHS-MIB?
CISCOSB-IPV6FHS-MIB manages IPv6 First Hop Security features, including RA Guard and ND (Neighbor Discovery) Inspection, on Cisco Small Business switches, protecting against rogue router advertisements and IPv6 neighbor-discovery-based attacks on a per-VLAN basis. It exposes per-VLAN enable/disable bitmaps for these security features, spread across multiple objects covering different VLAN ID sub-ranges to cover the full VLAN ID space. As a security-configuration MIB its monitoring value is confirming which VLANs currently have RA Guard and ND Inspection actively enabled; a gap here represents an exposure to IPv6-based first-hop attacks rather than a hardware fault, but is nonetheless a critical device-security-posture status to track. It is a vendor-private MIB with no formal dependency on other MIBs, implementing Cisco's IPv6 First Hop Security feature set independent of any IETF security MIB. It is deployed on Cisco Small Business switches in networks running IPv6 where L2 security against rogue RA/ND traffic is required. Engineers can download the CISCOSB-IPV6FHS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-IPV6FHS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Small Business switch
Monitoring Examples
An administrator would check rlFirstHopSecEnableVlanTable/rlFirstHopSecEnableVlanEntry and its per-range bitmaps (rlFirstHopSecEnableVlan1to1024, rlFirstHopSecEnableVlan1025to2048, etc.) to confirm First Hop Security is enabled on a specific VLAN, and similarly inspect rlNdInspectionEnableVlanTable/rlNdInspectionEnableVlanEntry to verify ND Inspection status for that same VLAN range. Finding a VLAN unexpectedly absent from the enabled bitmap would explain why rogue IPv6 router advertisements are getting through on that segment. These tables are polled for security-posture auditing rather than traffic/performance monitoring.
What Can Be Monitored
- RA Guard/First Hop Security enabled VLANs
- ND Inspection enabled VLANs
- per-VLAN security feature status
This MIB depends on
Related MIBs
Imported Objects
From CISCOSB-BRIDGEMIBOBJECTS-MIB
| VlanList1 | |
| VlanList2 | |
| VlanList3 | |
| VlanList4 |
| rndErrorDesc | OBJECT-TYPE |
| rndErrorSeverity | OBJECT-TYPE |
From CISCOSB-MIB
| rlMacMulticast | OBJECT-IDENTITY |
| rndNotifications | OBJECT-IDENTITY |
| switch001 | MODULE-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From Q-BRIDGE-MIB
| PortList | |
| VlanId | |
| VlanIndex |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using rlFirstHopSecCountersRxNdpRA OID:
Select a Cisco Small Business switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rlFirstHopSecCountersRxNdpRA into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of NDP Router Advertisement messages received on the interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rlDhcpGuard | 1.3.6.1.4.1.9.6.1.101.215.5 | |||
| INT rlDhcpGuardActivePolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.5 | INTEGER | read-only | Specify the role of the device attached. |
| RLI rlDhcpGuardActivePolicyDeviceRoleType | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.6 | RlIpv6FhsSettingType | read-only | rlDhcpGuardActivePolicyDeviceRole setting type. |
| rlDhcpGuardActivePolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.5.7.1 | not-accessible | The row definition for this table. | |
| NUM rlDhcpGuardActivePolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlDhcpGuardActivePolicyMatchReplyAddr | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.9 | DisplayString | read-only | The IPv6 prefix list to be matched for assigned IPv6 addressed by DHCPv6 servers. The empty string means this validation is disabled. |
| RLI rlDhcpGuardActivePolicyMatchReplyAddrType | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.10 | RlIpv6FhsSettingType | read-only | rlDhcpGuardActivePolicyMatchReplyAddr setting type. |
| STR rlDhcpGuardActivePolicyMatchServerAddr | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.7 | DisplayString | read-only | The IPv6 prefix list to be matched for IPv6 address in messages sent by DHCPv6 servers. The empty string means this validation is disabled. |
| RLI rlDhcpGuardActivePolicyMatchServerAddrType | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.8 | RlIpv6FhsSettingType | read-only | rlDhcpGuardActivePolicyMatchServerAddr setting type. |
| STR rlDhcpGuardActivePolicyNamePort | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.3 | DisplayString | read-only | The DHCPv6 guard policy name attached to given interface. |
| STR rlDhcpGuardActivePolicyNameVlan | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.4 | DisplayString | read-only | The DHCPv6 guard policy name attached to given vlan. |
| I32 rlDhcpGuardActivePolicyPrefMax | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.13 | Integer32 | read-only | Maximum preference value limit. A value of -2 indicates validation is disabled. |
| RLI rlDhcpGuardActivePolicyPrefMaxType | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.14 | RlIpv6FhsSettingType | read-only | rlDhcpGuardActivePolicyPrefMax setting type. |
| I32 rlDhcpGuardActivePolicyPrefMin | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.11 | Integer32 | read-only | Minimum preference value limit. A value of -2 indicates validation is disabled. |
| RLI rlDhcpGuardActivePolicyPrefMinType | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.12 | RlIpv6FhsSettingType | read-only | rlDhcpGuardActivePolicyPrefMin setting type. |
| rlDhcpGuardActivePolicyTable | 1.3.6.1.4.1.9.6.1.101.215.5.7 | not-accessible | The table specifies DHCPv6 guard per policy configurations. | |
| VLA rlDhcpGuardActivePolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.5.7.1.2 | VlanId | not-accessible | The VLAN identifier. |
| OCT rlDhcpGuardEnableVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlDhcpGuardEnableVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlDhcpGuardEnableVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlDhcpGuardEnableVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlDhcpGuardEnableVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.5.6.1 | not-accessible | Statically created by local or network management vlan list | |
| INT rlDhcpGuardEnableVlanIndex | 1.3.6.1.4.1.9.6.1.101.215.5.6.1.1 | INTEGER | not-accessible | The table contains only one static entry. |
| rlDhcpGuardEnableVlanTable | 1.3.6.1.4.1.9.6.1.101.215.5.6 | not-accessible | A table contains only one entry of a static vlan list. | |
| NTF rlDhcpGuardMessageDropTrap | 1.3.6.1.4.1.9.6.1.101.0.236 | Warning trap indicating that IPv6 DHCP Guard has dropped a message. | ||
| INT rlDhcpGuardPolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.2 | INTEGER | read-write | Specify the role of the device attached. |
| rlDhcpGuardPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.5.1.1 | not-accessible | The row definition for this table. | |
| STR rlDhcpGuardPolicyMatchReplyAddr | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.6 | DisplayString | read-write | The IPv6 prefix list to be matched for assigned IPv6 addressed by DHCPv6 servers. Relevant only when rlDhcpGuardPolicyMatchReplyAddrSpecified is true. The empty string means this validation is disabled. |
| T/F rlDhcpGuardPolicyMatchReplyAddrSpecified | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.5 | TruthValue | read-write | Indicates whether the rlDhcpGuardPolicyMatchReplyAddr is specified. |
| STR rlDhcpGuardPolicyMatchServerAddr | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.4 | DisplayString | read-write | The IPv6 prefix list to be matched for IPv6 address in messages sent by DHCPv6 servers. Relevant only when rlDhcpGuardPolicyMatchServerAddrSpecified is true. The empty string means this validation is disabled. |
| T/F rlDhcpGuardPolicyMatchServerAddrSpecified | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.3 | TruthValue | read-write | Indicates whether the rlDhcpGuardPolicyMatchServerAddr is specified. |
| STR rlDhcpGuardPolicyName | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.1 | DisplayString | not-accessible | The DHCPv6 guard policy name |
| rlDhcpGuardPolicyPortEntry | 1.3.6.1.4.1.9.6.1.101.215.5.3.1 | not-accessible | The row definition for this table. | |
| NUM rlDhcpGuardPolicyPortIfIndex | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.2 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlDhcpGuardPolicyPortName | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.1 | DisplayString | not-accessible | The DHCPv6 guard policy name |
| rlDhcpGuardPolicyPortTable | 1.3.6.1.4.1.9.6.1.101.215.5.3 | not-accessible | The table specifies DHCPv6 guard policy attachment for ports. | |
| OCT rlDhcpGuardPolicyPortVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.4 | OCTET STRING | read-only | A list of vlans from 1025 to 2048. |
| OCT rlDhcpGuardPolicyPortVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.3 | OCTET STRING | read-only | A list of vlans from 1 to 1024. |
| OCT rlDhcpGuardPolicyPortVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.5 | OCTET STRING | read-only | A list of vlans from 2049 to 3072. |
| OCT rlDhcpGuardPolicyPortVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.5.3.1.6 | OCTET STRING | read-only | A list of vlans from 3073 to 4094. |
| I32 rlDhcpGuardPolicyPrefMax | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.8 | Integer32 | read-write | Maximum preference value limit. A value of -1 indicates unspecified value. A value of -2 indicates validation is disabled. |
| I32 rlDhcpGuardPolicyPrefMin | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.7 | Integer32 | read-write | Minimum preference value limit. A value of -1 indicates unspecified value. A value of -2 indicates validation is disabled. |
| ROW rlDhcpGuardPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.5.1.1.9 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlDhcpGuardPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.5.1 | not-accessible | The table specifies DHCPv6 guard per policy configurations. | |
| OCT rlDhcpGuardPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlDhcpGuardPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlDhcpGuardPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlDhcpGuardPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlDhcpGuardPolicyVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.5.5.1 | not-accessible | The row definition for this table. | |
| STR rlDhcpGuardPolicyVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.5.5.1.1 | DisplayString | not-accessible | The DHCPv6 guard policy name |
| rlDhcpGuardPolicyVlanTable | 1.3.6.1.4.1.9.6.1.101.215.5.5 | not-accessible | The table specifies DHCPv6 guard policy attachment for vlans. | |
| rlDhcpGuardPortPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.5.2.1 | not-accessible | The row definition for this table. | |
| NUM rlDhcpGuardPortPolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlDhcpGuardPortPolicyName | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.2 | DisplayString | not-accessible | The DHCPv6 guard policy name |
| ROW rlDhcpGuardPortPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlDhcpGuardPortPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.5.2 | not-accessible | The table specifies DHCPv6 guard policy attachment for ports. | |
| OCT rlDhcpGuardPortPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.4 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlDhcpGuardPortPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.3 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlDhcpGuardPortPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.5 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlDhcpGuardPortPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.5.2.1.6 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| I32 rlDhcpGuardPrefMax | 1.3.6.1.4.1.9.6.1.101.215.5.9 | Integer32 | read-write | Maximum preference value limit. A value of -2 indicates validation is disabled. |
| I32 rlDhcpGuardPrefMin | 1.3.6.1.4.1.9.6.1.101.215.5.8 | Integer32 | read-write | Minimum preference value limit. A value of -2 indicates validation is disabled. |
| rlDhcpGuardVlanPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.5.4.1 | not-accessible | The row definition for this table. | |
| STR rlDhcpGuardVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.5.4.1.2 | DisplayString | read-write | The DHCPv6 guard policy name |
| ROW rlDhcpGuardVlanPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.5.4.1.3 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlDhcpGuardVlanPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.5.4 | not-accessible | The table specifies DHCPv6 guard policy attachment for vlans. | |
| VLA rlDhcpGuardVlanPolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.5.4.1.1 | VlanId | not-accessible | The port's interface index. |
| rlFirstHopSec | 1.3.6.1.4.1.9.6.1.101.215.1 | |||
| rlFirstHopSecActivePolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.1.7.1 | not-accessible | The row definition for this table. | |
| NUM rlFirstHopSecActivePolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| RLI rlFirstHopSecActivePolicyLogDrop | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.5 | RlIpv6FhsSettingStatusType | read-only | Enable/disable of the logging of dropped packets. |
| RLI rlFirstHopSecActivePolicyLogDropType | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.6 | RlIpv6FhsSettingType | read-only | rlFirstHopSecActivePolicyLogDrop setting type. |
| STR rlFirstHopSecActivePolicyNamePort | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.3 | DisplayString | read-only | The first hop security policy name attached to given interface. |
| STR rlFirstHopSecActivePolicyNameVlan | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.4 | DisplayString | read-only | The first hop security policy name attached to given vlan. |
| rlFirstHopSecActivePolicyTable | 1.3.6.1.4.1.9.6.1.101.215.1.7 | not-accessible | The table specifies first hop security per policy configurations. | |
| VLA rlFirstHopSecActivePolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.1.7.1.2 | VlanId | not-accessible | The VLAN identifier. |
| NUM rlFirstHopSecClearCounters | 1.3.6.1.4.1.9.6.1.101.215.1.10 | InterfaceIndexOrZero | read-write | When this object is set to zero IPv6 First Hop Security Counters are cleared on all interfaces. When this object is set to a valid interface index then IPv6 First Hop Security counters are cleared on this interface. Reading this object has no effect. |
| C32 rlFirstHopSecCountersDropDhcpAdverise | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.13 | Counter32 | read-only | Number of DHCPv6 ADVERTISE messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropDhcpGuardUnauthorizedAssignedAddress | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.35 | Counter32 | read-only | Number of dropped DHCPv6 server messages due to unauthorized address in IA_ADDR. |
| C32 rlFirstHopSecCountersDropDhcpGuardUnauthorizedMessage | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.32 | Counter32 | read-only | Number of dropped DHCPv6 server messages on client interface. |
| C32 rlFirstHopSecCountersDropDhcpGuardUnauthorizedServerPreference | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.34 | Counter32 | read-only | Number of dropped DHCPv6 server messages due to unauthorized server preference. |
| C32 rlFirstHopSecCountersDropDhcpGuardUnauthorizedSourceAddress | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.33 | Counter32 | read-only | Number of dropped DHCPv6 server messages due to unauthorized source address. |
| C32 rlFirstHopSecCountersDropDhcpLeasequeryReply | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.21 | Counter32 | read-only | Number of DHCPv6 LEASEQUERY-REPLY messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropDhcpReconfigure | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.17 | Counter32 | read-only | Number of DHCPv6 RECONFIGURE messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropDhcpRelayReply | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.19 | Counter32 | read-only | Number of DHCPv6 RELAY-REPLY messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropDhcpReply | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.15 | Counter32 | read-only | Number of DHCPv6 REPLY messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropNbrBindingIntegrityIllegalDhcpv6 | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.38 | Counter32 | read-only | Number of dropped DHCPv6 messages due to one of the following reasons: invalid source address, invalid destination address, invalid Hop-Limit, invalid ICMP code, invalid ICMP length, invalid ICMP checksum, invalid target address, invalid flag, invalid option. |
| C32 rlFirstHopSecCountersDropNbrBindingIntegrityIllegalIcmpv6 | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.37 | Counter32 | read-only | Number of dropped ICMPv6 messages due to one of the following reasons: invalid source address, invalid destination address, invalid Hop-Limit, invalid ICMP code, invalid ICMP length, invalid ICMP checksum, invalid target address, invalid flag, invalid option. |
| C32 rlFirstHopSecCountersDropNdInspectionInvalidSourceMac | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.29 | Counter32 | read-only | Number of dropped NDP messages due to invalid source MAC address. |
| C32 rlFirstHopSecCountersDropNdInspectionUnauthorizedSecLevel | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.31 | Counter32 | read-only | Number of dropped NDP messages due to unauthorized CGA sec-level. |
| C32 rlFirstHopSecCountersDropNdInspectionUnsecureMessage | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.30 | Counter32 | read-only | Number of dropped NDP messages due to being unsecure. |
| C32 rlFirstHopSecCountersDropNdpNA | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.7 | Counter32 | read-only | Number of NDP Neighbor Advertisement messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropNdpNS | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.9 | Counter32 | read-only | Number of NDP Neighbor Solicitation messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropNdpRA | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.3 | Counter32 | read-only | Number of NDP Router Advertisement messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropNdpRedirect | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.11 | Counter32 | read-only | Number of NDP Redirect messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropNdpRS | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.5 | Counter32 | read-only | Number of NDP Router Solicitation messages dropped on the interface. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedAdvertisedPrefix | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.27 | Counter32 | read-only | Number of dropped RA messages due to unauthorized advertised prefix. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedHopLimit | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.23 | Counter32 | read-only | Number of dropped RA messages due to unauthorized Cur-Hop-Limit. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedManagedConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.24 | Counter32 | read-only | Number of dropped RA messages due to unauthorized Managed config flag. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedMessage | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.22 | Counter32 | read-only | Number of dropped router messages received on host interface. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedOtherConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.25 | Counter32 | read-only | Number of dropped RA messages due to unauthorized Other config flag. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedRouterPreference | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.26 | Counter32 | read-only | Number of dropped RA messages due to unauthorized router preference. |
| C32 rlFirstHopSecCountersDropRaGuardUnauthorizedSourceAddress | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.28 | Counter32 | read-only | Number of dropped RA messages due to unauthorized source address. |
| C32 rlFirstHopSecCountersDropSourceGuardNoBinding | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.36 | Counter32 | read-only | Number of frame dropped by IPv6 Source Guard due to lack of binding in Neighbor Binding Table. |
| rlFirstHopSecCountersEntry | 1.3.6.1.4.1.9.6.1.101.215.1.8.1 | not-accessible | The row definition for this table. | |
| NUM rlFirstHopSecCountersIfIndex | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.1 | InterfaceIndex | not-accessible | Interface index |
| C32 rlFirstHopSecCountersRxDhcpAdverise | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.12 | Counter32 | read-only | Number of DHCPv6 ADVERTISE messages received on the interface. |
| C32 rlFirstHopSecCountersRxDhcpLeasequeryReply | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.20 | Counter32 | read-only | Number of DHCPv6 LEASEQUERY-REPLY messages received on the interface. |
| C32 rlFirstHopSecCountersRxDhcpReconfigure | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.16 | Counter32 | read-only | Number of DHCPv6 RECONFIGURE messages received on the interface. |
| C32 rlFirstHopSecCountersRxDhcpRelayReply | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.18 | Counter32 | read-only | Number of DHCPv6 RELAY-REPLY messages received on the interface. |
| C32 rlFirstHopSecCountersRxDhcpReply | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.14 | Counter32 | read-only | Number of DHCPv6 REPLY messages received on the interface. |
| C32 rlFirstHopSecCountersRxNdpNA | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.6 | Counter32 | read-only | Number of NDP Neighbor Advertisement messages received on the interface. |
| C32 rlFirstHopSecCountersRxNdpNS | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.8 | Counter32 | read-only | Number of NDP Neighbor Solicitation messages received on the interface. |
| C32 rlFirstHopSecCountersRxNdpRAEx | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.2 | Counter32 | read-only | Number of NDP Router Advertisement messages received on the interface. |
| C32 rlFirstHopSecCountersRxNdpRedirect | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.10 | Counter32 | read-only | Number of NDP Redirect messages received on the interface. |
| C32 rlFirstHopSecCountersRxNdpRS | 1.3.6.1.4.1.9.6.1.101.215.1.8.1.4 | Counter32 | read-only | Number of NDP Router Solicitation messages received on the interface. |
| rlFirstHopSecCountersTable | 1.3.6.1.4.1.9.6.1.101.215.1.8 | not-accessible | The table displays first hop security counters | |
| OCT rlFirstHopSecEnableVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlFirstHopSecEnableVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlFirstHopSecEnableVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlFirstHopSecEnableVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlFirstHopSecEnableVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.1.6.1 | not-accessible | Statically created by local or network management vlan list | |
| INT rlFirstHopSecEnableVlanIndex | 1.3.6.1.4.1.9.6.1.101.215.1.6.1.1 | INTEGER | not-accessible | The table contains only one static entry. |
| rlFirstHopSecEnableVlanTable | 1.3.6.1.4.1.9.6.1.101.215.1.6 | not-accessible | A table contains only one entry of a static vlan list. | |
| INT rlFirstHopSecLogDrop | 1.3.6.1.4.1.9.6.1.101.215.1.9 | INTEGER | read-write | Enable/disable of the logging of dropped packets. |
| rlFirstHopSecPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.1.1.1 | not-accessible | The row definition for this table. | |
| RLI rlFirstHopSecPolicyLogDrop | 1.3.6.1.4.1.9.6.1.101.215.1.1.1.2 | RlIpv6FhsSettingStatusType | read-write | Enable/disable of the logging of dropped packets. |
| STR rlFirstHopSecPolicyName | 1.3.6.1.4.1.9.6.1.101.215.1.1.1.1 | DisplayString | not-accessible | The first hop security policy name |
| rlFirstHopSecPolicyPortEntry | 1.3.6.1.4.1.9.6.1.101.215.1.3.1 | not-accessible | The row definition for this table. | |
| NUM rlFirstHopSecPolicyPortIfIndex | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.2 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlFirstHopSecPolicyPortName | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.1 | DisplayString | not-accessible | The first hop security policy name |
| rlFirstHopSecPolicyPortTable | 1.3.6.1.4.1.9.6.1.101.215.1.3 | not-accessible | The table specifies first hop security policy attachment for ports. | |
| OCT rlFirstHopSecPolicyPortVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.4 | OCTET STRING | read-only | A list of vlans from 1025 to 2048. |
| OCT rlFirstHopSecPolicyPortVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.3 | OCTET STRING | read-only | A list of vlans from 1 to 1024. |
| OCT rlFirstHopSecPolicyPortVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.5 | OCTET STRING | read-only | A list of vlans from 2049 to 3072. |
| OCT rlFirstHopSecPolicyPortVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.1.3.1.6 | OCTET STRING | read-only | A list of vlans from 3073 to 4094. |
| ROW rlFirstHopSecPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.1.1.1.3 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlFirstHopSecPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.1.1 | not-accessible | The table specifies first hop security per policy configurations. | |
| OCT rlFirstHopSecPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlFirstHopSecPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlFirstHopSecPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlFirstHopSecPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlFirstHopSecPolicyVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.1.5.1 | not-accessible | The row definition for this table. | |
| STR rlFirstHopSecPolicyVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.1.5.1.1 | DisplayString | not-accessible | The first hop security policy name |
| rlFirstHopSecPolicyVlanTable | 1.3.6.1.4.1.9.6.1.101.215.1.5 | not-accessible | The table specifies first hop security policy attachment for vlans. | |
| rlFirstHopSecPortPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.1.2.1 | not-accessible | The row definition for this table. | |
| NUM rlFirstHopSecPortPolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlFirstHopSecPortPolicyName | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.2 | DisplayString | not-accessible | The first hop security policy name |
| ROW rlFirstHopSecPortPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlFirstHopSecPortPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.1.2 | not-accessible | The table specifies first hop security policy attachment for ports. | |
| OCT rlFirstHopSecPortPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.4 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlFirstHopSecPortPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.3 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlFirstHopSecPortPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlFirstHopSecPortPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.1.2.1.6 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlFirstHopSecVlanPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.1.4.1 | not-accessible | The row definition for this table. | |
| STR rlFirstHopSecVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.1.4.1.2 | DisplayString | read-write | The first hop security policy name |
| ROW rlFirstHopSecVlanPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.1.4.1.3 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlFirstHopSecVlanPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.1.4 | not-accessible | The table specifies first hop security policy attachment for vlans. | |
| VLA rlFirstHopSecVlanPolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.1.4.1.1 | VlanId | not-accessible | The VLAN identifier. |
| rlIpv6Fhs | 1.3.6.1.4.1.9.6.1.101.215 | The private MIB module definition for IPv6 First Hop Security. | ||
| rlNbrBindingIntegrity | 1.3.6.1.4.1.9.6.1.101.215.4 | |||
| I32 rlNbrBindingIntegrityActivePolicyBindingLifetime | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.15 | Integer32 | read-only | Neighbor Binding entry's default lifetime in seconds. |
| RLI rlNbrBindingIntegrityActivePolicyBindingLifetimeType | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.16 | RlIpv6FhsSettingType | read-only | rlNbrBindingIntegrityActivePolicyBindingLifetime setting type. |
| INT rlNbrBindingIntegrityActivePolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.5 | INTEGER | read-only | Specify the role of the device attached. |
| RLI rlNbrBindingIntegrityActivePolicyDeviceRoleType | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.6 | RlIpv6FhsSettingType | read-only | rlNbrBindingIntegrityActivePolicyDeviceRole setting type. |
| rlNbrBindingIntegrityActivePolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.4.9.1 | not-accessible | The row definition for this table. | |
| NUM rlNbrBindingIntegrityActivePolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| RLI rlNbrBindingIntegrityActivePolicyLogBinding | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.7 | RlIpv6FhsSettingStatusType | read-only | Enable/disable logging of Neighbor Binding Table events. |
| RLI rlNbrBindingIntegrityActivePolicyLogBindingType | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.8 | RlIpv6FhsSettingType | read-only | rlNbrBindingIntegrityActivePolicyLogBinding setting type. |
| I32 rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimit | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.11 | Integer32 | read-only | Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -2 indicates there is no limit. |
| RLI rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimitType | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.12 | RlIpv6FhsSettingType | read-only | rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimit setting type. |
| I32 rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimit | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.13 | Integer32 | read-only | Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -2 indicates there is no limit. |
| RLI rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimitType | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.14 | RlIpv6FhsSettingType | read-only | rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimit setting type. |
| I32 rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimit | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.9 | Integer32 | read-only | Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -2 indicates there is no limit. |
| RLI rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimitType | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.10 | RlIpv6FhsSettingType | read-only | rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimit setting type. |
| STR rlNbrBindingIntegrityActivePolicyNamePort | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.3 | DisplayString | read-only | The Neighbor Binding Integrity policy name attached to given interface. |
| STR rlNbrBindingIntegrityActivePolicyNameVlan | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.4 | DisplayString | read-only | The Neighbor Binding Integrity policy name attached to given vlan. |
| rlNbrBindingIntegrityActivePolicyTable | 1.3.6.1.4.1.9.6.1.101.215.4.9 | not-accessible | The table specifies Neighbor Binding Integrity per policy configurations. | |
| VLA rlNbrBindingIntegrityActivePolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.4.9.1.2 | VlanId | not-accessible | The VLAN identifier. |
| rlNbrBindingIntegrityBindingEntry | 1.3.6.1.4.1.9.6.1.101.215.4.7.1 | not-accessible | The row definition for this table. | |
| INT rlNbrBindingIntegrityBindingExpiryTime | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.8 | INTEGER | read-only | The time in seconds until the entry is expired. |
| NUM rlNbrBindingIntegrityBindingIfIndex | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.4 | InterfaceIndex | read-write | The binding entry's anchor interface. |
| I32 rlNbrBindingIntegrityBindingLifetime | 1.3.6.1.4.1.9.6.1.101.215.4.10 | Integer32 | read-write | Neighbor Binding entry's default lifetime in seconds. |
| MAC rlNbrBindingIntegrityBindingMacAddress | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.5 | MacAddress | read-write | The binding entry's anchor MAC Address. |
| INT rlNbrBindingIntegrityBindingOrigin | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.6 | INTEGER | read-only | The binding entry's origin: local, static, ndp, dhcp. |
| ROW rlNbrBindingIntegrityBindingRowStatus | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.9 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| IP rlNbrBindingIntegrityBindingSourceAddress | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.3 | InetAddress | not-accessible | The binding entry's INET address of the source. |
| IPt rlNbrBindingIntegrityBindingSourceAddressType | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.2 | InetAddressType | not-accessible | The binding entry's INET address type of the source. The only inet type that is supported is ipv6. |
| INT rlNbrBindingIntegrityBindingState | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.7 | INTEGER | read-only | The binding entry's state: valid, tentative. |
| rlNbrBindingIntegrityBindingTable | 1.3.6.1.4.1.9.6.1.101.215.4.7 | not-accessible | The table specifies Neighbor Binding Integrity binding table. | |
| VLA rlNbrBindingIntegrityBindingVlanTag | 1.3.6.1.4.1.9.6.1.101.215.4.7.1.1 | VlanId | not-accessible | The binding entry's VLAN tag. |
| rlNbrBindingIntegrityClearEntry | 1.3.6.1.4.1.9.6.1.101.215.4.8.1 | not-accessible | The row definition for this table. | |
| NUM rlNbrBindingIntegrityClearIfIndex | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.5 | InterfaceIndex | read-write | cClear binding entries with this anchor interface. |
| INT rlNbrBindingIntegrityClearIndex | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.1 | INTEGER | not-accessible | The row index in the table. |
| MAC rlNbrBindingIntegrityClearMacAddress | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.6 | MacAddress | read-write | clear binding entries with this anchor MAC Address. |
| ROW rlNbrBindingIntegrityClearRowStatus | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| IP rlNbrBindingIntegrityClearSourceAddress | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.4 | InetAddress | read-write | Clear binding entries with this source address. |
| IPt rlNbrBindingIntegrityClearSourceAddressType | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.3 | InetAddressType | read-write | Clear binding entries with this source address type. The only inet type that is supported is ipv6. |
| rlNbrBindingIntegrityClearTable | 1.3.6.1.4.1.9.6.1.101.215.4.8 | not-accessible | The table clears Neighbor Binding Integrity binding table according to configured filters. | |
| VLA rlNbrBindingIntegrityClearVlanTag | 1.3.6.1.4.1.9.6.1.101.215.4.8.1.2 | VlanId | read-write | Clear binding entries with this VLAN tag. |
| OCT rlNbrBindingIntegrityEnableVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlNbrBindingIntegrityEnableVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlNbrBindingIntegrityEnableVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlNbrBindingIntegrityEnableVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlNbrBindingIntegrityEnableVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.4.6.1 | not-accessible | Statically created by local or network management vlan list | |
| INT rlNbrBindingIntegrityEnableVlanIndex | 1.3.6.1.4.1.9.6.1.101.215.4.6.1.1 | INTEGER | not-accessible | The table contains only one static entry. |
| rlNbrBindingIntegrityEnableVlanTable | 1.3.6.1.4.1.9.6.1.101.215.4.6 | not-accessible | A table contains only one entry of a static vlan list. | |
| I32 rlNbrBindingIntegrityEntriesNum | 1.3.6.1.4.1.9.6.1.101.215.4.15 | Integer32 | read-only | Number of entries in Neighbor Binding Table. |
| NTF rlNbrBindingIntegrityEntryAddedTrap | 1.3.6.1.4.1.9.6.1.101.0.230 | Information trap indicating that new binding entry was added to Neighbor Binding Table. | ||
| NTF rlNbrBindingIntegrityEntryAnchorChangeTrap | 1.3.6.1.4.1.9.6.1.101.0.232 | Information trap indicating that binding entry anchor was changed. | ||
| NTF rlNbrBindingIntegrityEntryDeletedTrap | 1.3.6.1.4.1.9.6.1.101.0.233 | Information trap indicating that binding entry was deleted. | ||
| NTF rlNbrBindingIntegrityEntryLimitReachTrap | 1.3.6.1.4.1.9.6.1.101.0.234 | Warning trap indicating that a new entry was not inserted into Neighbor Binding table because of maximum limit has been reached. | ||
| NTF rlNbrBindingIntegrityEntryStateChangeTrap | 1.3.6.1.4.1.9.6.1.101.0.231 | Information trap indicating that binding entry state was changed. | ||
| T/F rlNbrBindingIntegrityLogBinding | 1.3.6.1.4.1.9.6.1.101.215.4.11 | TruthValue | read-write | Enable/disable logging of Neighbor Binding Table events |
| I32 rlNbrBindingIntegrityMaxEntriesInterfaceLimit | 1.3.6.1.4.1.9.6.1.101.215.4.13 | Integer32 | read-write | Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -2 indicates there is no limit. |
| I32 rlNbrBindingIntegrityMaxEntriesMacLimit | 1.3.6.1.4.1.9.6.1.101.215.4.14 | Integer32 | read-write | Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -2 indicates there is no limit. |
| I32 rlNbrBindingIntegrityMaxEntriesVlanLimit | 1.3.6.1.4.1.9.6.1.101.215.4.12 | Integer32 | read-write | Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -2 indicates there is no limit. |
| NTF rlNbrBindingIntegrityOverflowTrap | 1.3.6.1.4.1.9.6.1.101.0.235 | Warning trap indicating that a new entry was not inserted into Neighbor Binding table because of the Neighbor Binding table overflow. | ||
| INT rlNbrBindingIntegrityPolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.2 | INTEGER | read-write | Specify the role of the device attached. |
| rlNbrBindingIntegrityPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.4.1.1 | not-accessible | The row definition for this table. | |
| RLI rlNbrBindingIntegrityPolicyLogBinding | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.3 | RlIpv6FhsSettingStatusType | read-write | Enable/disable logging of Neighbor Binding Table events |
| I32 rlNbrBindingIntegrityPolicyMaxEntriesInterfaceLimit | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.5 | Integer32 | read-write | Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit. |
| I32 rlNbrBindingIntegrityPolicyMaxEntriesMacLimit | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.6 | Integer32 | read-write | Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit. |
| I32 rlNbrBindingIntegrityPolicyMaxEntriesVlanLimit | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.4 | Integer32 | read-write | Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit. |
| STR rlNbrBindingIntegrityPolicyName | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.1 | DisplayString | not-accessible | Neighbor Binding Integrity policy name. |
| rlNbrBindingIntegrityPolicyPortEntry | 1.3.6.1.4.1.9.6.1.101.215.4.3.1 | not-accessible | The row definition for this table. | |
| NUM rlNbrBindingIntegrityPolicyPortIfIndex | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.2 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlNbrBindingIntegrityPolicyPortName | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.1 | DisplayString | not-accessible | The Neighbor Binding Integrity policy name |
| rlNbrBindingIntegrityPolicyPortTable | 1.3.6.1.4.1.9.6.1.101.215.4.3 | not-accessible | The table specifies Neighbor Binding Integrity policy attachment for ports. | |
| OCT rlNbrBindingIntegrityPolicyPortVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.4 | OCTET STRING | read-only | A list of vlans from 1025 to 2048. |
| OCT rlNbrBindingIntegrityPolicyPortVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.3 | OCTET STRING | read-only | A list of vlans from 1 to 1024. |
| OCT rlNbrBindingIntegrityPolicyPortVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.5 | OCTET STRING | read-only | A list of vlans from 2049 to 3072. |
| OCT rlNbrBindingIntegrityPolicyPortVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.4.3.1.6 | OCTET STRING | read-only | A list of vlans from 3073 to 4094. |
| ROW rlNbrBindingIntegrityPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.4.1.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlNbrBindingIntegrityPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.4.1 | not-accessible | The table specifies Neighbor Binding Integrity per policy configurations. | |
| OCT rlNbrBindingIntegrityPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlNbrBindingIntegrityPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlNbrBindingIntegrityPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlNbrBindingIntegrityPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlNbrBindingIntegrityPolicyVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.4.5.1 | not-accessible | The row definition for this table. | |
| STR rlNbrBindingIntegrityPolicyVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.4.5.1.1 | DisplayString | not-accessible | The Neighbor Binding Integrity policy name |
| rlNbrBindingIntegrityPolicyVlanTable | 1.3.6.1.4.1.9.6.1.101.215.4.5 | not-accessible | The table specifies Neighbor Binding Integrity policy attachment for vlans. | |
| rlNbrBindingIntegrityPortPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.4.2.1 | not-accessible | The row definition for this table. | |
| NUM rlNbrBindingIntegrityPortPolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlNbrBindingIntegrityPortPolicyName | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.2 | DisplayString | not-accessible | The Neighbor Binding Integrity policy name. |
| ROW rlNbrBindingIntegrityPortPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlNbrBindingIntegrityPortPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.4.2 | not-accessible | The table specifies Neighbor Binding Integrity policy attachment for ports. | |
| OCT rlNbrBindingIntegrityPortPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.4 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlNbrBindingIntegrityPortPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.3 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlNbrBindingIntegrityPortPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.5 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlNbrBindingIntegrityPortPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.4.2.1.6 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlNbrBindingIntegrityVlanPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.4.4.1 | not-accessible | The row definition for this table. | |
| STR rlNbrBindingIntegrityVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.4.4.1.2 | DisplayString | read-write | The Neighbor Binding Integrity policy name. |
| ROW rlNbrBindingIntegrityVlanPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.4.4.1.3 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlNbrBindingIntegrityVlanPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.4.4 | not-accessible | The table specifies Neighbor Binding Integrity policy attachment for vlans. | |
| VLA rlNbrBindingIntegrityVlanPolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.4.4.1.1 | VlanId | not-accessible | The VLAN identifier. |
| rlNdInspection | 1.3.6.1.4.1.9.6.1.101.215.2 | |||
| INT rlNdInspectionActivePolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.5 | INTEGER | read-only | Specify the role of the device attached. |
| RLI rlNdInspectionActivePolicyDeviceRoleType | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.6 | RlIpv6FhsSettingType | read-only | rlNdInspectionActivePolicyDeviceRole setting type. |
| RLI rlNdInspectionActivePolicyDropUnsecured | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.7 | RlIpv6FhsSettingStatusType | read-only | Enable/disable of dropping unsecured messages. |
| RLI rlNdInspectionActivePolicyDropUnsecuredType | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.8 | RlIpv6FhsSettingType | read-only | rlNdInspectionActivePolicyDropUnsecured setting type. |
| rlNdInspectionActivePolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.2.7.1 | not-accessible | The row definition for this table. | |
| NUM rlNdInspectionActivePolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlNdInspectionActivePolicyNamePort | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.3 | DisplayString | read-only | The ND inspection policy name attached to given interface. |
| STR rlNdInspectionActivePolicyNameVlan | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.4 | DisplayString | read-only | The ND inspection policy name attached to given vlan. |
| I32 rlNdInspectionActivePolicySecLevelMin | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.9 | Integer32 | read-only | The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value of -2 indicates verification of security level is disabled. |
| RLI rlNdInspectionActivePolicySecLevelMinType | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.10 | RlIpv6FhsSettingType | read-only | rlNdInspectionActivePolicySecLevelMin setting type. |
| rlNdInspectionActivePolicyTable | 1.3.6.1.4.1.9.6.1.101.215.2.7 | not-accessible | The table specifies ND inspection per policy configurations. | |
| RLI rlNdInspectionActivePolicyValidateSrcMac | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.11 | RlIpv6FhsSettingStatusType | read-only | Enable/disable validating of the source media access control (MAC) address against the link-layer address. |
| RLI rlNdInspectionActivePolicyValidateSrcMacType | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.12 | RlIpv6FhsSettingType | read-only | rlNdInspectionActivePolicyValidateSrcMac setting type. |
| VLA rlNdInspectionActivePolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.2.7.1.2 | VlanId | not-accessible | The VLAN identifier. |
| T/F rlNdInspectionDropUnsecured | 1.3.6.1.4.1.9.6.1.101.215.2.9 | TruthValue | read-write | Global configuration of dropping unsecured messages. Unsecure messages are neighbor discovery messages with no or invalid CGA and RSA Signature options. The value true(1) means that unsecured messages are dropped; the value false(2) means that they are not. |
| OCT rlNdInspectionEnableVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlNdInspectionEnableVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlNdInspectionEnableVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlNdInspectionEnableVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlNdInspectionEnableVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.2.6.1 | not-accessible | Statically created by local or network management vlan list | |
| INT rlNdInspectionEnableVlanIndex | 1.3.6.1.4.1.9.6.1.101.215.2.6.1.1 | INTEGER | not-accessible | The table contains only one static entry. |
| rlNdInspectionEnableVlanTable | 1.3.6.1.4.1.9.6.1.101.215.2.6 | not-accessible | A table contains only one entry of a static vlan list. | |
| NTF rlNdInspectionMessageDropTrap | 1.3.6.1.4.1.9.6.1.101.0.228 | Warning trap indicating that IPv6 ND Inspection has dropped a message. | ||
| INT rlNdInspectionPolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.2 | INTEGER | read-write | Specify the role of the device attached. |
| RLI rlNdInspectionPolicyDropUnsecured | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.3 | RlIpv6FhsSettingStatusType | read-write | Enable/disable of dropping unsecured messages. |
| rlNdInspectionPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.2.1.1 | not-accessible | The row definition for this table. | |
| STR rlNdInspectionPolicyName | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.1 | DisplayString | not-accessible | The ND inspection policy name |
| rlNdInspectionPolicyPortEntry | 1.3.6.1.4.1.9.6.1.101.215.2.3.1 | not-accessible | The row definition for this table. | |
| NUM rlNdInspectionPolicyPortIfIndex | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.2 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlNdInspectionPolicyPortName | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.1 | DisplayString | not-accessible | The ND inspection policy name |
| rlNdInspectionPolicyPortTable | 1.3.6.1.4.1.9.6.1.101.215.2.3 | not-accessible | The table specifies ND inspection policy attachment for ports. | |
| OCT rlNdInspectionPolicyPortVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.4 | OCTET STRING | read-only | A list of vlans from 1025 to 2048. |
| OCT rlNdInspectionPolicyPortVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.3 | OCTET STRING | read-only | A list of vlans from 1 to 1024. |
| OCT rlNdInspectionPolicyPortVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.5 | OCTET STRING | read-only | A list of vlans from 2049 to 3072. |
| OCT rlNdInspectionPolicyPortVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.2.3.1.6 | OCTET STRING | read-only | A list of vlans from 3073 to 4094. |
| ROW rlNdInspectionPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.6 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| I32 rlNdInspectionPolicySecLevelMin | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.4 | Integer32 | read-write | The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value of -1 indicates unspecified value. The value of -2 indicates verification of security level is disabled. |
| rlNdInspectionPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.2.1 | not-accessible | The table specifies ND inspection per policy configurations. | |
| RLI rlNdInspectionPolicyValidateSrcMac | 1.3.6.1.4.1.9.6.1.101.215.2.1.1.5 | RlIpv6FhsSettingStatusType | read-write | Enable/disable validating of the source media access control (MAC) address against the link-layer address. |
| OCT rlNdInspectionPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlNdInspectionPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlNdInspectionPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlNdInspectionPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlNdInspectionPolicyVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.2.5.1 | not-accessible | The row definition for this table. | |
| STR rlNdInspectionPolicyVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.2.5.1.1 | DisplayString | not-accessible | The ND inspection policy name |
| rlNdInspectionPolicyVlanTable | 1.3.6.1.4.1.9.6.1.101.215.2.5 | not-accessible | The table specifies ND inspection policy attachment for vlans. | |
| rlNdInspectionPortPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.2.2.1 | not-accessible | The row definition for this table. | |
| NUM rlNdInspectionPortPolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlNdInspectionPortPolicyName | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.2 | DisplayString | not-accessible | The ND inspection policy name |
| ROW rlNdInspectionPortPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlNdInspectionPortPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.2.2 | not-accessible | The table specifies ND inspection policy attachment for ports. | |
| OCT rlNdInspectionPortPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.4 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlNdInspectionPortPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.3 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlNdInspectionPortPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.5 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlNdInspectionPortPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.2.2.1.6 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| I32 rlNdInspectionSecLevelMin | 1.3.6.1.4.1.9.6.1.101.215.2.10 | Integer32 | read-write | The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value -2 indicates verification of security level is disabled. |
| INT rlNdInspectionValidateSrcMac | 1.3.6.1.4.1.9.6.1.101.215.2.8 | INTEGER | read-write | Enable/disable validating of the source media access control (MAC) address against the link-layer address. |
| rlNdInspectionVlanPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.2.4.1 | not-accessible | The row definition for this table. | |
| STR rlNdInspectionVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.2.4.1.2 | DisplayString | read-write | The ND inspection policy name |
| ROW rlNdInspectionVlanPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.2.4.1.3 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlNdInspectionVlanPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.2.4 | not-accessible | The table specifies ND inspection policy attachment for vlans. | |
| VLA rlNdInspectionVlanPolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.2.4.1.1 | VlanId | not-accessible | The VLAN identifier. |
| rlRaGuard | 1.3.6.1.4.1.9.6.1.101.215.3 | |||
| INT rlRaGuardActivePolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.5 | INTEGER | read-only | Specify the role of the device attached. |
| RLI rlRaGuardActivePolicyDeviceRoleType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.6 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyDeviceRole setting type. |
| rlRaGuardActivePolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.3.7.1 | not-accessible | The row definition for this table. | |
| I32 rlRaGuardActivePolicyHopLimitMax | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.9 | Integer32 | read-only | Maximum hop-count limit. A value of 0 indicates validation is disabled. |
| RLI rlRaGuardActivePolicyHopLimitMaxType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.10 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyHopLimitMax setting type. |
| I32 rlRaGuardActivePolicyHopLimitMin | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.7 | Integer32 | read-only | Minimum hop-count limit. A value of 0 indicates validation is disabled. |
| RLI rlRaGuardActivePolicyHopLimitMinType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.8 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyHopLimitMin setting type. |
| NUM rlRaGuardActivePolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| INT rlRaGuardActivePolicyManagedConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.11 | INTEGER | read-only | Configuration of -Managed address configuration- flag verification. |
| RLI rlRaGuardActivePolicyManagedConfigFlagType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.12 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyManagedConfigFlag setting type. |
| STR rlRaGuardActivePolicyMatchRaAddr | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.13 | DisplayString | read-only | The IPv6 prefix list to be matched for router's source IPv6 address. The empty string means this validation is disabled. |
| RLI rlRaGuardActivePolicyMatchRaAddrType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.14 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyMatchRaAddr setting type. |
| STR rlRaGuardActivePolicyMatchRaPrefixes | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.15 | DisplayString | read-only | The IPv6 prefix list to be matched for advertised prefixes. The empty string means this validation is disabled. |
| RLI rlRaGuardActivePolicyMatchRaPrefixesType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.16 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyMatchRaPrefixes setting type. |
| STR rlRaGuardActivePolicyNamePort | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.3 | DisplayString | read-only | The RA Guard policy name attached to given interface. |
| STR rlRaGuardActivePolicyNameVlan | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.4 | DisplayString | read-only | The RA Guard policy name attached to given vlan. |
| INT rlRaGuardActivePolicyOtherConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.17 | INTEGER | read-only | Configuration of -Other configuration- flag verification. |
| RLI rlRaGuardActivePolicyOtherConfigFlagType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.18 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyOtherConfigFlag setting type. |
| INT rlRaGuardActivePolicyRouterPrefMax | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.21 | INTEGER | read-only | Maximum advertised preference limit. |
| RLI rlRaGuardActivePolicyRouterPrefMaxType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.22 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyRouterPrefMax setting type. |
| INT rlRaGuardActivePolicyRouterPrefMin | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.19 | INTEGER | read-only | Minimum advertised preference limit. |
| RLI rlRaGuardActivePolicyRouterPrefMinType | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.20 | RlIpv6FhsSettingType | read-only | rlRaGuardActivePolicyRouterPrefMin setting type. |
| rlRaGuardActivePolicyTable | 1.3.6.1.4.1.9.6.1.101.215.3.7 | not-accessible | The table specifies RA Guard per policy configurations. | |
| VLA rlRaGuardActivePolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.3.7.1.2 | VlanId | not-accessible | The VLAN identifier. |
| OCT rlRaGuardEnableVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlRaGuardEnableVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlRaGuardEnableVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlRaGuardEnableVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlRaGuardEnableVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.3.6.1 | not-accessible | Statically created by local or network management vlan list | |
| INT rlRaGuardEnableVlanIndex | 1.3.6.1.4.1.9.6.1.101.215.3.6.1.1 | INTEGER | not-accessible | The table contains only one static entry. |
| rlRaGuardEnableVlanTable | 1.3.6.1.4.1.9.6.1.101.215.3.6 | not-accessible | A table contains only one entry of a static vlan list. | |
| I32 rlRaGuardHopLimitMax | 1.3.6.1.4.1.9.6.1.101.215.3.9 | Integer32 | read-write | Maximum hop-count limit. A value of zero indicates that hop-count limit is not verified. |
| I32 rlRaGuardHopLimitMin | 1.3.6.1.4.1.9.6.1.101.215.3.8 | Integer32 | read-write | Minimum hop-count limit. A value of zero indicates that hop-count limit is not verified. |
| INT rlRaGuardManagedConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.3.10 | INTEGER | read-write | Global configuration of -Managed address configuration- flag verification. |
| NTF rlRaGuardMessageDropTrap | 1.3.6.1.4.1.9.6.1.101.0.229 | Warning trap indicating that IPv6 Ra Guard has dropped a message. | ||
| INT rlRaGuardOtherConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.3.11 | INTEGER | read-write | Global configuration of -Other configuration- flag verification. |
| INT rlRaGuardPolicyDeviceRole | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.2 | INTEGER | read-write | Specify the role of the device attached. |
| rlRaGuardPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.3.1.1 | not-accessible | The row definition for this table. | |
| I32 rlRaGuardPolicyHopLimitMax | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.4 | Integer32 | read-write | Maximum hop-count limit. A value of -1 indicates unspecified value. A value of 0 indicates validation is disabled. |
| I32 rlRaGuardPolicyHopLimitMin | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.3 | Integer32 | read-write | Minimum hop-count limit. A value of -1 indicates unspecified value. A value of 0 indicates validation is disabled. |
| INT rlRaGuardPolicyManagedConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.5 | INTEGER | read-write | Configuration of -Managed address configuration- flag verification. |
| STR rlRaGuardPolicyMatchRaAddr | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.7 | DisplayString | read-write | The IPv6 prefix list to be matched for router's source IPv6 address. Relevant only when rlRaGuardPolicyMatchRaAddrSpecified is true. The empty string means this validation is disabled. |
| T/F rlRaGuardPolicyMatchRaAddrSpecified | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.6 | TruthValue | read-write | Indicates whether the rlRaGuardPolicyMatchRaAddr is specified |
| STR rlRaGuardPolicyMatchRaPrefixes | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.9 | DisplayString | read-write | The IPv6 prefix list to be matched for advertised prefixes. Relevant only when rlRaGuardPolicyMatchRaPrefixesSpecified is true. The empty string means this validation is disabled. |
| T/F rlRaGuardPolicyMatchRaPrefixesSpecified | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.8 | TruthValue | read-write | Indicates whether the rlRaGuardPolicyMatchRaPrefixes is specified |
| STR rlRaGuardPolicyName | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.1 | DisplayString | not-accessible | The RA Guard policy name. |
| INT rlRaGuardPolicyOtherConfigFlag | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.10 | INTEGER | read-write | Configuration of -Other configuration- flag verification. |
| rlRaGuardPolicyPortEntry | 1.3.6.1.4.1.9.6.1.101.215.3.3.1 | not-accessible | The row definition for this table. | |
| NUM rlRaGuardPolicyPortIfIndex | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.2 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlRaGuardPolicyPortName | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.1 | DisplayString | not-accessible | The RA Guard policy name |
| rlRaGuardPolicyPortTable | 1.3.6.1.4.1.9.6.1.101.215.3.3 | not-accessible | The table specifies RA guard policy attachment for ports. | |
| OCT rlRaGuardPolicyPortVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.4 | OCTET STRING | read-only | A list of vlans from 1025 to 2048. |
| OCT rlRaGuardPolicyPortVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.3 | OCTET STRING | read-only | A list of vlans from 1 to 1024. |
| OCT rlRaGuardPolicyPortVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.5 | OCTET STRING | read-only | A list of vlans from 2049 to 3072. |
| OCT rlRaGuardPolicyPortVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.3.3.1.6 | OCTET STRING | read-only | A list of vlans from 3073 to 4094. |
| INT rlRaGuardPolicyRouterPrefMax | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.12 | INTEGER | read-write | Maximum advertised preference limit. |
| INT rlRaGuardPolicyRouterPrefMin | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.11 | INTEGER | read-write | Minimum advertised preference limit. |
| ROW rlRaGuardPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.3.1.1.13 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlRaGuardPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.3.1 | not-accessible | The table specifies RA guard per policy configurations. | |
| OCT rlRaGuardPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.3 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlRaGuardPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.2 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlRaGuardPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.4 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlRaGuardPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.5 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| rlRaGuardPolicyVlanEntry | 1.3.6.1.4.1.9.6.1.101.215.3.5.1 | not-accessible | The row definition for this table. | |
| STR rlRaGuardPolicyVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.3.5.1.1 | DisplayString | not-accessible | The RA Guard policy name |
| rlRaGuardPolicyVlanTable | 1.3.6.1.4.1.9.6.1.101.215.3.5 | not-accessible | The table specifies RA guard policy attachment for vlans. | |
| rlRaGuardPortPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.3.2.1 | not-accessible | The row definition for this table. | |
| NUM rlRaGuardPortPolicyIfIndex | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.1 | InterfaceIndex | not-accessible | The port's interface index. |
| STR rlRaGuardPortPolicyName | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.2 | DisplayString | not-accessible | The RA Guard policy name. |
| ROW rlRaGuardPortPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.7 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlRaGuardPortPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.3.2 | not-accessible | The table specifies RA guard policy attachment for ports. | |
| OCT rlRaGuardPortPolicyVlan1025to2048 | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.4 | OCTET STRING | read-write | A list of vlans from 1025 to 2048. |
| OCT rlRaGuardPortPolicyVlan1to1024 | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.3 | OCTET STRING | read-write | A list of vlans from 1 to 1024. |
| OCT rlRaGuardPortPolicyVlan2049to3072 | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.5 | OCTET STRING | read-write | A list of vlans from 2049 to 3072. |
| OCT rlRaGuardPortPolicyVlan3073to4094 | 1.3.6.1.4.1.9.6.1.101.215.3.2.1.6 | OCTET STRING | read-write | A list of vlans from 3073 to 4094. |
| INT rlRaGuardRouterPrefMax | 1.3.6.1.4.1.9.6.1.101.215.3.13 | INTEGER | read-write | Maximum advertised preference limit. |
| INT rlRaGuardRouterPrefMin | 1.3.6.1.4.1.9.6.1.101.215.3.12 | INTEGER | read-write | Minimum advertised preference limit. |
| rlRaGuardVlanPolicyEntry | 1.3.6.1.4.1.9.6.1.101.215.3.4.1 | not-accessible | The row definition for this table. | |
| STR rlRaGuardVlanPolicyName | 1.3.6.1.4.1.9.6.1.101.215.3.4.1.2 | DisplayString | read-write | The RA Guard policy name. |
| ROW rlRaGuardVlanPolicyRowStatus | 1.3.6.1.4.1.9.6.1.101.215.3.4.1.3 | RowStatus | read-create | The row status variable, used according to row installation and removal conventions. |
| rlRaGuardVlanPolicyTable | 1.3.6.1.4.1.9.6.1.101.215.3.4 | not-accessible | The table specifies RA guard policy attachment for vlans. | |
| VLA rlRaGuardVlanPolicyVlanTag | 1.3.6.1.4.1.9.6.1.101.215.3.4.1.1 | VlanId | not-accessible | The VLAN identifier. |
| NTF rlSrcGuardMessageDropTrap | 1.3.6.1.4.1.9.6.1.101.0.237 | Warning trap indicating that IPv6 Source Guard has dropped a message. |
RFC description
Configures IPv6 First Hop Security features on Cisco Small Business switches, including ND inspection and VLAN-based security settings.
Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.