All MIBs › CISCOSB-IPV6FHS-MIB › rlFirstHopSecPortPolicyVlan2049to3072
rlFirstHopSecPortPolicyVlan2049to3072
Module: CISCOSB-IPV6FHS-MIB
OID (symbolic): CISCOSB-IPV6FHS-MIB::rlFirstHopSecPortPolicyVlan2049to3072
OID (numeric): 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: A list of vlans from 2049 to 3072.
What is rlFirstHopSecPortPolicyVlan2049to3072?
This read-write OCTET STRING is one VLAN-range column (2049 to 3072) of a row in the IPv6 First-Hop Security port-policy table, where each bit marks whether the FHS policy attached to that port also applies to the matching VLAN in this range. An admin cares because it lets a trunk port run the FHS policy on only some of its VLANs instead of all of them, so IPv6 First-Hop Security enforcement can be scoped VLAN-by-VLAN on a single physical port. For example, setting the bit for VLAN 2500 in this object on port Gi1/0/3's row applies policy "fhs-uplink" to VLAN 2500 traffic on that trunk while leaving other VLANs in the 2049 to 3072 range on the same port unaffected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5 snmpwalk -v2c -c public <target> CISCOSB-IPV6FHS-MIB::rlFirstHopSecPortPolicyVlan2049to3072
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5.1 snmpget -v2c -c public <target> CISCOSB-IPV6FHS-MIB::rlFirstHopSecPortPolicyVlan2049to3072.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlFirstHopSecPortPolicyVlan2049to3072.1
Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-IPV6FHS-MIB::rlFirstHopSecPortPolicyVlan2049to3072 OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.215 | rlIpv6Fhs | CISCOSB-IPV6FHS-MIB |
| 1.3.6.1.4.1.9.6.1.101.215.1 | rlFirstHopSec | CISCOSB-IPV6FHS-MIB |
| 1.3.6.1.4.1.9.6.1.101.215.1.2 | rlFirstHopSecPortPolicyTable | CISCOSB-IPV6FHS-MIB |
| 1.3.6.1.4.1.9.6.1.101.215.1.2.1 | rlFirstHopSecPortPolicyEntry | CISCOSB-IPV6FHS-MIB |
| 1.3.6.1.4.1.9.6.1.101.215.1.2.1.5 | rlFirstHopSecPortPolicyVlan2049to3072 | CISCOSB-IPV6FHS-MIB |