BTI-7000-MIB (page 1 of 2)

All MIBs › BTI-7000-MIB

Organization: BTI Systems Inc.

Last Updated: 2012-10-09

Category: Optical and WDM, Vendor: BTI Systems

Description: Manages BTI Systems BTI-7000 series optical transport network equipment configuration and alarms.

4,153 OIDs total — showing 1-3,010 (page 1 of 2)

Page 1 of 2 Next »

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BTI-7000-MIB?

BTI-7000-MIB is a BTI Systems (later part of Juniper) vendor MIB for managing the BTI-7000 series optical transport network platform, covering network element (NE) identity, software version, timing, and provisioning behavior. It exposes network element software version, numbering/site identifiers, date/time and timezone with auto-DST, gateway/secondary-gateway IP addressing, and auto-provisioning/de-provisioning timers and flags, all under objects, networkElement, and inventory branches. Its monitoring role centers on software and configuration status of the NE: confirming the running neSWVersion matches the intended release, verifying gateway reachability and failover (neActiveGateway), and tracking auto-provisioning timers that govern how quickly a newly inserted card is brought into service or removed. It is an optical-transport carrier platform MIB typically used alongside ITU/Telcordia-aligned optical performance MIBs for the underlying transport layer rather than as a standalone. Deployment context is metro/long-haul optical transport network elements managed by a carrier's NMS/EMS for provisioning and software version control. Engineers can download the BTI-7000-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BTI-7000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BTI Systems BTI-7000 series optical transport network element

Monitoring Examples

An operator would poll neSWVersion across a set of BTI-7000 NEs to confirm consistent software levels before a network-wide change, and check neActiveGateway against neGateway/neSecGateway to verify management-plane failover is working correctly. Watching neAutoProv and neAutoEnabledTimer settings helps confirm a newly inserted line card will auto-provision within the expected window rather than sitting idle. A mismatch between neDateAndTime and expected NTP-synced time, with neAutoDST misconfigured, would explain incorrect alarm timestamps.

What Can Be Monitored

software version
active/backup management gateway
auto-provisioning and de-provisioning timers
system date/time and timezone/DST config
network element and site identification

Imported Objects

From BTI-MIB

bti7000	OBJECT-IDENTITY
btiModules	OBJECT-IDENTITY

From BTI-TC-MIB

AdminStatus
AmdPortType
AmdType
AreaID
BERType
CondReportType
CondServiceAffecting
CondSeverity
CpType
DesignatedRouterPriority
DuplexModeType
EnvNotifCodeType
FiberType
FixedX10
FixedX100
HoursAndMinutes
InetAddress
InetAddressType
InitializeCmd
LldpChassisId
LldpChassisIdSubtype
LldpPortId
LldpPortIdSubtype
LoopbackType
MediaRateType
MirrorConfigType
NotifCodeType
NotifObjectType
OaType
OcnType
OdunType
OperStatQlfr
OperStatus
PMIntervalType
PMMontype
PMValidity
PassivePortType
PowerFeedModeType
ProtSwEvtType
ProtSwOpCmd
ProtectionStatusType
PvxL1PortType
PvxPortType
ShelfConfigType
ShelfType
SlotType
StmnType
StsnType
SwitchIdxType
SyncSwEvtType
TimeZone
Unsigned64
UpgradeCompleteStage
VcnType
WDMGrid
XCType
XcvrProtocolType
XcvrType

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using geSpeed OID:

Select a BTI Systems optical transport device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type geSpeed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The speed of the Gigabit Ethernet facility link. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline (in Mbps), since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
bti7000Mib	1.3.6.1.4.1.18070.1.3			The external MIB definitions for the BTI 7000 series products.
objects	1.3.6.1.4.1.18070.2.2.1
networkElement	1.3.6.1.4.1.18070.2.2.1.1
STR neSWVersion	1.3.6.1.4.1.18070.2.2.1.1.1	DisplayString	read-only	The software version that is active on the NE currently.
INT neNum	1.3.6.1.4.1.18070.2.2.1.1.2	INTEGER	read-write	This is a unique network element number used to identify the network element and to differentiate it from other NEs in the management domain.
INT neSiteNum	1.3.6.1.4.1.18070.2.2.1.1.3	INTEGER	read-write	This is a network element site number used to uniquely identify the site of the NE and to differentiate it from other NE sites in the management domain.
DAT neDateAndTime	1.3.6.1.4.1.18070.2.2.1.1.4	DateAndTime	read-write	The current system date and time, without time zone information.
TIM neTimeZone	1.3.6.1.4.1.18070.2.2.1.1.5	TimeZone	read-write	The time zone in which the local time of this system is to be reported. Typically, the time zone is the one in which the system is physically located.
INT neAutoDST	1.3.6.1.4.1.18070.2.2.1.1.6	INTEGER	read-write	A setting that indicates whether the system time should be updated automatically in accordance with the daylight savings time characteristics of the current time zone.
IP neGateway	1.3.6.1.4.1.18070.2.2.1.1.7	IpAddress	read-write	The default IP routing gateway for network management interfaces on the node. If not specified, this object returns a value of 0.0.0.0.
IP neSecGateway	1.3.6.1.4.1.18070.2.2.1.1.8	IpAddress	read-write	The secondary IP routing gateway for network management interfaces on the node. If not specified, this object returns a value of 0.0.0.0.
IP neActiveGateway	1.3.6.1.4.1.18070.2.2.1.1.9	IpAddress	read-only	The IP routing gateway that is currently active on the node. If no gateway is active, this object returns a value of 0.0.0.0.
INT neAutoProv	1.3.6.1.4.1.18070.2.2.1.1.10	INTEGER	read-write	A setting that specifies if automatic provisioning of equipment and facilities is enabled. If automatic provisioning is enabled, this object indicates the default administration status. The possible values include: - enabled: Applicable entities are auto provisioned with the initial state enabled. - disabled: Applicable entities are auto provisioned with the initial state disabled. - autoEnabled: Applicable entities are auto provisioned and placed into the auto-enabled state. - autoProvOff: Auto provisioning is disabled.
HOU neAutoDeProv	1.3.6.1.4.1.18070.2.2.1.1.11	HoursAndMinutes	read-write	The time delay after a physical shelf or circuit pack is removed from the NE before the provisioned entities that are supported by the removed equipment are automatically deprovisioned. If this object is set to a value of 000-00, auto deprovisioning is disabled.
HOU neAutoEnabledTimer	1.3.6.1.4.1.18070.2.2.1.1.12	HoursAndMinutes	read-write	The system wide default auto-enable timer value. This timer specifies a time delay after a provisioned facility in the auto-enabled state is cleared of all alarms before the state of the facility transitions to enabled. The default value can be overridden by a facility-specific value that is specified when the facility is either provisioned or edited in its respective table.
ntpClient	1.3.6.1.4.1.18070.2.2.1.1.13
HOU ntpClientPollingRate	1.3.6.1.4.1.18070.2.2.1.1.13.1	HoursAndMinutes	read-write	The polling rate for the NTP client to periodically fetch the system time from the list of NTP servers configured.
INT ntpClientAuthKey	1.3.6.1.4.1.18070.2.2.1.1.13.2	INTEGER	read-write	The NTP authentication key ID, if authentication is required.
STR ntpClientSyncState	1.3.6.1.4.1.18070.2.2.1.1.13.3	DisplayString	read-only	Status indicating if the node is in sync with one of the time servers. Either Y or N.
INT ntpClientStratum	1.3.6.1.4.1.18070.2.2.1.1.13.4	INTEGER	read-only	Specifies the stratum of the timer server the node in in sync with.
STR ntpClientRefIPAddr	1.3.6.1.4.1.18070.2.2.1.1.13.5	DisplayString	read-only	The IP address of the time server the node is in sync with.
ntpClientAssocTable	1.3.6.1.4.1.18070.2.2.1.1.13.6		not-accessible	A list of NTP servers to poll for the system time. The NTP client then decides which is best clock source.
ntpClientAssocEntry	1.3.6.1.4.1.18070.2.2.1.1.13.6.1		not-accessible	The list entry for an NTP server.
IP ntpClientAssocIdx	1.3.6.1.4.1.18070.2.2.1.1.13.6.1.1	IpAddress	not-accessible	The IP address of the NTP server.
ROW ntpClientAssocRowStatus	1.3.6.1.4.1.18070.2.2.1.1.13.6.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the NTP client association table.
DAT ntpOldTimeAndDate	1.3.6.1.4.1.18070.2.2.1.1.13.7	DateAndTime	accessible-for-notify	The date and time of the system before the NTP client updated the system clock.
DAT ntpNewTimeAndDate	1.3.6.1.4.1.18070.2.2.1.1.13.8	DateAndTime	accessible-for-notify	The new system date and time updated by the NTP client.
IP ntpRefIP	1.3.6.1.4.1.18070.2.2.1.1.13.9	IpAddress	accessible-for-notify	This the NTP server being used as the clock reference for the system.
U32 ntpRefStratum	1.3.6.1.4.1.18070.2.2.1.1.13.10	Unsigned32	accessible-for-notify	This is the stratum of the NTP server being used as the clock reference for the system.
INT neFPDetect	1.3.6.1.4.1.18070.2.2.1.1.14	INTEGER	read-write	A setting that indicates whether the system should report pack missing alarms.
INT neHTAutoShutdown	1.3.6.1.4.1.18070.2.2.1.1.15	INTEGER	read-write	A system wide setting that specifies whether the circuit pack pack high temperature automatic shutdown (HTAS) is enabled. When enabled, the circuit packs which support the HTAS feature will be automatically powered down if the shutdown temperature threshold for that circuit pack is exceeded. There will be alarms indicating that the shutdown has occurred. The default setting is enabled.
inventory	1.3.6.1.4.1.18070.2.2.1.2
shelfInvTable	1.3.6.1.4.1.18070.2.2.1.2.1		not-accessible	This table contains one row for every physically detected shelf on the NE. Each row contains a list of attributes that pertain to a physical shelf.
shelfInvEntry	1.3.6.1.4.1.18070.2.2.1.2.1.1		not-accessible	The conceptual row object of the shelf inventory table.
INT shelfInvIdx	1.3.6.1.4.1.18070.2.2.1.2.1.1.1	INTEGER	accessible-for-notify	The number of the shelf. It is set to 1 for the main shelf, otherwise the object is based on the expansion shelf port on which the shelf is detected, and the number of hops from the main shelf.
STR shelfInvExpectedNEName	1.3.6.1.4.1.18070.2.2.1.2.1.1.2	DisplayString	accessible-for-notify	The NE name expected by the main shelf to be reported by the expansion shelf as the name of the NE to which it belongs.
STR shelfInvExpectedIPAddress	1.3.6.1.4.1.18070.2.2.1.2.1.1.3	DisplayString	accessible-for-notify	The string representation of the NE NMS IP address that is expected by the main shelf to be reported by the expansion shelf as the IP address of the NE to which it belongs.
INT shelfInvExpectedShelfNum	1.3.6.1.4.1.18070.2.2.1.2.1.1.4	INTEGER	accessible-for-notify	The number of the expansion shelf that is expected by the main shelf to be reported by the attached shelf.
STR shelfInvExpectedMSISerialNum	1.3.6.1.4.1.18070.2.2.1.2.1.1.5	DisplayString	accessible-for-notify	The serial number of the Main Shelf Interface circuit pack that is expected by the main shelf to be reported by the expansion shelf as the MSI serial number of the NE main shelf to which it belongs.
STR shelfInvDiscoveredNEName	1.3.6.1.4.1.18070.2.2.1.2.1.1.6	DisplayString	accessible-for-notify	The actual NE name reported by the expansion shelf as the name of the NE to which it belongs.
STR shelfInvDiscoveredIPAddress	1.3.6.1.4.1.18070.2.2.1.2.1.1.7	DisplayString	accessible-for-notify	The string representation of the actual NE NMS IP address reported by the expansion shelf as the IP address of the NE to which it belongs.
INT shelfInvDiscoveredShelfNum	1.3.6.1.4.1.18070.2.2.1.2.1.1.8	INTEGER	accessible-for-notify	The actual number of the expansion shelf reported by the attached shelf.
STR shelfInvDiscoveredMSISerialNum	1.3.6.1.4.1.18070.2.2.1.2.1.1.9	DisplayString	accessible-for-notify	The actual serial number of the Main Shelf Interface circuit pack reported by the expansion shelf as the MSI serial number of the NE main shelf to which it belongs.
SHE shelfInvType	1.3.6.1.4.1.18070.2.2.1.2.1.1.10	ShelfType	read-only	Indicates if the shelf functions as a main shelf or an expansion shelf.
STR shelfInvShortName	1.3.6.1.4.1.18070.2.2.1.2.1.1.11	DisplayString	read-only	A concise representation of the shelf brand name.
STR shelfInvName	1.3.6.1.4.1.18070.2.2.1.2.1.1.12	DisplayString	read-only	The full representation of the shelf brand name.
STR shelfInvChassisPEC	1.3.6.1.4.1.18070.2.2.1.2.1.1.13	DisplayString	read-only	A string representation of the Product Equipment Code for the shelf chassis alone.
STR shelfInvChassisCLEI	1.3.6.1.4.1.18070.2.2.1.2.1.1.14	DisplayString	read-only	A string representation of the Telcordia Common Language Equipment Identifier for the shelf chassis alone.
STR shelfInvAssemblyPEC	1.3.6.1.4.1.18070.2.2.1.2.1.1.15	DisplayString	read-only	A string representation of the Product Equipment Code for the shelf assembly, which bundles the shelf chassis, shelf interface pack, and cooling unit.
INT shelfInvRev	1.3.6.1.4.1.18070.2.2.1.2.1.1.16	INTEGER	read-only	The shelf hardware revision number. A value of 0 indicates that the revision is unspecified.
SHE shelfInvConfig	1.3.6.1.4.1.18070.2.2.1.2.1.1.17	ShelfConfigType	read-only	The shelf configuration with respect to the number of slots for holding replaceable circuit packs. Note: This object is no longer supported as of BTI 7000 Release 8.1.0, and is maintained in the MIB for backwards- compatibility for management of pre-8.1 nodes.
STR shelfInvUSI	1.3.6.1.4.1.18070.2.2.1.2.1.1.18	DisplayString	read-only	The Unique Serial Identifier (only for FNC-branded equipment)
STR shelfInvSerialNum	1.3.6.1.4.1.18070.2.2.1.2.1.1.19	DisplayString	read-only	The serial number of the unit.
STR shelfInvMfgDate	1.3.6.1.4.1.18070.2.2.1.2.1.1.20	DisplayString	read-only	The shelf manufacture date in the format YYYY-MM-DD.
STR shelfInvMfgLoc	1.3.6.1.4.1.18070.2.2.1.2.1.1.21	DisplayString	read-only	The shelf manufacture location.
STR shelfInvTestDate	1.3.6.1.4.1.18070.2.2.1.2.1.1.22	DisplayString	read-only	The shelf test date in the format YYYY-MM-DD.
STR shelfInvTestLoc	1.3.6.1.4.1.18070.2.2.1.2.1.1.23	DisplayString	read-only	The shelf test location.
slotInvTable	1.3.6.1.4.1.18070.2.2.1.2.2		not-accessible	This table contains one row for every slot on every shelf of the NE in which a circuit pack or other replaceable unit is seated. Each row contains a list of attributes that pertain to the circuit pack within the slot.
slotInvEntry	1.3.6.1.4.1.18070.2.2.1.2.2.1		not-accessible	The conceptual row object of the slot inventory table.
INT slotInvShelfIdx	1.3.6.1.4.1.18070.2.2.1.2.2.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the slot inventory item is detected.
SLO slotInvSlotTypeIdx	1.3.6.1.4.1.18070.2.2.1.2.2.1.2	SlotType	accessible-for-notify	The type of slot that contains the inventory item.
INT slotInvSlotIdx	1.3.6.1.4.1.18070.2.2.1.2.2.1.3	INTEGER	accessible-for-notify	The number of the slot within the shelf containing the inventory item. The number is from 1 to 20 for regular circuit pack slots. For main shelf interface type slots, the number is set to 0. For 7060/7030/7020 expansion shelf interface and cooling unit type slots, the number is set to 0. For 7200 common communications module type slots, the number is 1 or 2. For 7200 cooling unit type slots, the number is from 1 to 4.
STR slotInvSWVersion	1.3.6.1.4.1.18070.2.2.1.2.2.1.4	DisplayString	accessible-for-notify	The version of the software running on the circuit pack in the given slot.
STR slotInvPackShortName	1.3.6.1.4.1.18070.2.2.1.2.2.1.5	DisplayString	read-only	A concise representation of the name of the circuit pack or unit.
STR slotInvPackName	1.3.6.1.4.1.18070.2.2.1.2.2.1.6	DisplayString	read-only	The full name of the circuit pack or unit.
STR slotInvPackPEC	1.3.6.1.4.1.18070.2.2.1.2.2.1.7	DisplayString	read-only	The Product Equipment Code for the circuit pack or unit.
STR slotInvPackCLEI	1.3.6.1.4.1.18070.2.2.1.2.2.1.8	DisplayString	read-only	The Telcordia Common Language Equipment Identifier for the circuit pack or unit.
STR slotInvPackSerialNum	1.3.6.1.4.1.18070.2.2.1.2.2.1.9	DisplayString	read-only	The serial number of the unit.
INT slotInvPackRev	1.3.6.1.4.1.18070.2.2.1.2.2.1.10	INTEGER	read-only	The circuit pack or unit hardware revision number. A value of 0 indicates that the revision is unspecified.
STR slotInvPackMfgDate	1.3.6.1.4.1.18070.2.2.1.2.2.1.11	DisplayString	read-only	The circuit pack manufacture date in the format YYYY-MM-DD.
STR slotInvPackMfgLoc	1.3.6.1.4.1.18070.2.2.1.2.2.1.12	DisplayString	read-only	The circuit pack manufacture location.
STR slotInvPackTestDate	1.3.6.1.4.1.18070.2.2.1.2.2.1.13	DisplayString	read-only	The circuit pack test date in the format YYYY-MM-DD.
STR slotInvPackTestLoc	1.3.6.1.4.1.18070.2.2.1.2.2.1.14	DisplayString	read-only	The circuit pack test location.
UPG slotInvUpgradeStage	1.3.6.1.4.1.18070.2.2.1.2.2.1.15	UpgradeCompleteStage	accessible-for-notify	The stage of the circuit pack upgrade process that has been completed.
INT slotInvUpgradeResult	1.3.6.1.4.1.18070.2.2.1.2.2.1.16	INTEGER	accessible-for-notify	Indicates if the identified stage of the circuit pack upgrade process has resulted in success or failure.
STR slotInvPackUSI	1.3.6.1.4.1.18070.2.2.1.2.2.1.17	DisplayString	read-only	The Unique Serial Identifier (only for FNC-branded equipment)
INT slotInvTempHighTh	1.3.6.1.4.1.18070.2.2.1.2.2.1.18	INTEGER	read-only	The circuit pack high temperature threshold.
INT slotInvTempShutdownTh	1.3.6.1.4.1.18070.2.2.1.2.2.1.19	INTEGER	read-only	The circuit pack shutdown temperature threshold.
pluggableInvTable	1.3.6.1.4.1.18070.2.2.1.2.3		not-accessible	This table contains one row for every SFP/XFP or other pluggable present on any circuit pack or other replaceable unit present in the NE. Each row contains a list of attributes that pertain to the detected SFP/XFP.
pluggableInvEntry	1.3.6.1.4.1.18070.2.2.1.2.3.1		not-accessible	The conceptual row object of the pluggable inventory table.
INT pluggableInvShelfIdx	1.3.6.1.4.1.18070.2.2.1.2.3.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the pluggable inventory item resides.
SLO pluggableInvSlotTypeIdx	1.3.6.1.4.1.18070.2.2.1.2.3.1.2	SlotType	accessible-for-notify	The type of slot containing the pluggable inventory item.
INT pluggableInvSlotIdx	1.3.6.1.4.1.18070.2.2.1.2.3.1.3	INTEGER	accessible-for-notify	The number of the slot that contains the pluggable inventory item.
INT pluggableInvPortIdx	1.3.6.1.4.1.18070.2.2.1.2.3.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack that contains the pluggable inventory item.
INT pluggableInvType	1.3.6.1.4.1.18070.2.2.1.2.3.1.5	INTEGER	read-only	The type of small form-factor pluggable inventory item.
STR pluggableInvPEC	1.3.6.1.4.1.18070.2.2.1.2.3.1.6	DisplayString	read-only	The Product Equipment Code for the pluggable inventory item.
STR pluggableInvCLEI	1.3.6.1.4.1.18070.2.2.1.2.3.1.7	DisplayString	read-only	The Telcordia Common Language Equipment Identifier for the pluggable inventory item.
STR pluggableInvVendorName	1.3.6.1.4.1.18070.2.2.1.2.3.1.8	DisplayString	read-only	The Vendor Name of the pluggable inventory item.
STR pluggableInvVendorOUI	1.3.6.1.4.1.18070.2.2.1.2.3.1.9	DisplayString	read-only	The Vendor IEEE Organizationally Unique Identifier.
STR pluggableInvVendorPartNum	1.3.6.1.4.1.18070.2.2.1.2.3.1.10	DisplayString	read-only	The Vendor Part Number.
STR pluggableInvVendorRev	1.3.6.1.4.1.18070.2.2.1.2.3.1.11	DisplayString	read-only	The Vendor Revision Number.
STR pluggableInvVendorSerialNum	1.3.6.1.4.1.18070.2.2.1.2.3.1.12	DisplayString	read-only	The Vendor Serial Number.
STR pluggableInvMfgDate	1.3.6.1.4.1.18070.2.2.1.2.3.1.13	DisplayString	read-only	The manufacture date in the format YYYY-MM-DD..
INT pluggableInvConnectorType	1.3.6.1.4.1.18070.2.2.1.2.3.1.14	INTEGER	read-only	The type of connector on the pluggable unit.
INT pluggableInvMinBitRate	1.3.6.1.4.1.18070.2.2.1.2.3.1.15	INTEGER	read-only	The minimum bit rate supported by the pluggable. A value of 0 means unspecified.
INT pluggableInvMaxBitRate	1.3.6.1.4.1.18070.2.2.1.2.3.1.16	INTEGER	read-only	The maximum bit rate supported by the pluggable. A value of 0 means unspecified.
INT pluggableInvNomBitRate	1.3.6.1.4.1.18070.2.2.1.2.3.1.17	INTEGER	read-only	The nominal bit rate supported by the pluggable. A value of 0 means unspecified.
STR pluggableInvEncoding	1.3.6.1.4.1.18070.2.2.1.2.3.1.18	DisplayString	read-only	A textual comma-delimited list of serial encoding mechanisms supported by the pluggable.
FIX pluggableInvWavelength	1.3.6.1.4.1.18070.2.2.1.2.3.1.19	FixedX100	read-only	The wavelength transmitted by the pluggable. A value of 0 means unspecified.
INT pluggableInvReach	1.3.6.1.4.1.18070.2.2.1.2.3.1.20	INTEGER	read-only	The reach supported by the pluggable. A value of 0 means unspecified.
T/F pluggableInvTxFaultImpl	1.3.6.1.4.1.18070.2.2.1.2.3.1.21	TruthValue	read-only	Indicates if the pluggable implements the Transmit Fault signal.
T/F pluggableInvLOSImpl	1.3.6.1.4.1.18070.2.2.1.2.3.1.22	TruthValue	read-only	Indicates if the pluggable implements the Loss of Signal signal.
T/F pluggableInvDDiagImpl	1.3.6.1.4.1.18070.2.2.1.2.3.1.23	TruthValue	read-only	Indicates if the pluggable implements support for Digital Diagnostics.
T/F pluggableInvTxDisableImpl	1.3.6.1.4.1.18070.2.2.1.2.3.1.24	TruthValue	read-only	Indicates if the pluggable implements support for disabling the transmit laser.
INT pluggableInvMedia	1.3.6.1.4.1.18070.2.2.1.2.3.1.25	INTEGER	read-only	The physical media type of the pluggable
STR pluggableInvUSI	1.3.6.1.4.1.18070.2.2.1.2.3.1.26	DisplayString	read-only	The Unique Serial Identifier (only for FNC-branded equipment)
FIX pluggableInvWavelengthMin	1.3.6.1.4.1.18070.2.2.1.2.3.1.27	FixedX100	read-only	The wavelength minimum for the tunable pluggable. A value of 0 means unspecified.
FIX pluggableInvWavelengthMax	1.3.6.1.4.1.18070.2.2.1.2.3.1.28	FixedX100	read-only	The wavelength maximum for the tunable pluggable.A value of 0 means unspecified.
INT pluggableInvWavelengthSpacing	1.3.6.1.4.1.18070.2.2.1.2.3.1.29	INTEGER	read-only	The wavelength spacing for the tunable pluggable. A value of 0 means unspecified.
slotInvDataTable	1.3.6.1.4.1.18070.2.2.1.2.4		not-accessible	This table contains a listing of any specialized data records available for the slot inventory entries on the system. Each row contains a single item of data for a specialized data record for a slot inventory entry.
slotInvDataEntry	1.3.6.1.4.1.18070.2.2.1.2.4.1		not-accessible	The conceptual row object of the slot inventory data table.
INT slotInvDataShelfIdx	1.3.6.1.4.1.18070.2.2.1.2.4.1.1	INTEGER	not-accessible	The number of the shelf on which the slot inventory item is detected.
SLO slotInvDataSlotTypeIdx	1.3.6.1.4.1.18070.2.2.1.2.4.1.2	SlotType	not-accessible	The type of slot that contains the inventory item.
INT slotInvDataSlotIdx	1.3.6.1.4.1.18070.2.2.1.2.4.1.3	INTEGER	not-accessible	The number of the slot within the shelf containing the inventory item. The number is from 1 to 20 for regular circuit pack slots. For shelfInterface and coolingUnit type slots, the number is set to 0.
U32 slotInvDataRecordIdx	1.3.6.1.4.1.18070.2.2.1.2.4.1.4	Unsigned32	not-accessible	The specialized data record index.
INT slotInvDataNameIdx	1.3.6.1.4.1.18070.2.2.1.2.4.1.5	INTEGER	not-accessible	The name of the data item.
STR slotInvDataValue	1.3.6.1.4.1.18070.2.2.1.2.4.1.6	DisplayString	read-only	The value of the data item.
equipment	1.3.6.1.4.1.18070.2.2.1.3
shelfTable	1.3.6.1.4.1.18070.2.2.1.3.1		not-accessible	This table contains one row for every provisioned shelf on the NE. Each row contains a list of attributes that pertain to a provisioned shelf.
shelfEntry	1.3.6.1.4.1.18070.2.2.1.3.1.1		not-accessible	The conceptual row object of the shelf table.
INT shelfIdx	1.3.6.1.4.1.18070.2.2.1.3.1.1.1	INTEGER	accessible-for-notify	The number of the shelf that has been provisioned. This is set to 1 for the main shelf. Otherwise, the number is based on the expansion shelf port number on which this shelf is expected to be detected and the number of hops from the main shelf.
SHE shelfProvConfig	1.3.6.1.4.1.18070.2.2.1.3.1.1.2	ShelfConfigType	read-create	The provisioned configuration for the shelf. Note: This object is no longer supported as of BTI 7000 Release 8.1.0, and is maintained in the MIB for backwards- compatibility for management of pre-8.1 nodes.
SHE shelfDiscConfig	1.3.6.1.4.1.18070.2.2.1.3.1.1.3	ShelfConfigType	accessible-for-notify	The configuration of the actual shelf discovered. Note: This object is no longer supported as of BTI 7000 Release 8.1.0, and is maintained in the MIB for backwards- compatibility for management of pre-8.1 nodes.
SHE shelfType	1.3.6.1.4.1.18070.2.2.1.3.1.1.4	ShelfType	read-create	Indicates if the provisioned shelf is a main or expansion shelf. Only expansion shelves can be created. The main shelf is automatically provisioned and can never be de-provisioned.
STR shelfPEC	1.3.6.1.4.1.18070.2.2.1.3.1.1.5	DisplayString	read-create	Indicates the provisioned shelf Product Equipment Code. This is a mandatory object when a row of the shelf table is created. The PEC can only be set at the time of row creation, and it cannot be edited later.
ADM shelfAdminStatus	1.3.6.1.4.1.18070.2.2.1.3.1.1.6	AdminStatus	read-create	The administrative status of the shelf.
OPE shelfOperStatus	1.3.6.1.4.1.18070.2.2.1.3.1.1.7	OperStatus	read-only	The reported operational status of the shelf.
OPE shelfOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.3.1.1.8	OperStatQlfr	read-only	A textual list of qualifiers of the reported operational status of the shelf.
STR shelfId	1.3.6.1.4.1.18070.2.2.1.3.1.1.9	DisplayString	read-create	Textual data recorded by the user to describe the provisioned shelf in a manner useful to the user such as the location where the shelf is installed.
STR shelfCustom1	1.3.6.1.4.1.18070.2.2.1.3.1.1.10	DisplayString	read-create	A variable length text string for operating company use.
STR shelfCustom2	1.3.6.1.4.1.18070.2.2.1.3.1.1.11	DisplayString	read-create	A variable length text string for operating company use.
STR shelfCustom3	1.3.6.1.4.1.18070.2.2.1.3.1.1.12	DisplayString	read-create	A variable length text string for operating company use.
POW shelfPowerFeedA	1.3.6.1.4.1.18070.2.2.1.3.1.1.13	PowerFeedModeType	read-create	The power feed mode for rail A.
POW shelfPowerFeedB	1.3.6.1.4.1.18070.2.2.1.3.1.1.14	PowerFeedModeType	read-create	The power feed mode for rail B.
ROW shelfRowStatus	1.3.6.1.4.1.18070.2.2.1.3.1.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the shelf table, which in turn controls provisioning and deprovisioning of shelf objects.
cpTable	1.3.6.1.4.1.18070.2.2.1.3.2		not-accessible	This table contains one row for every provisioned circuit pack on the NE. Each row contains a list of attributes that pertain to a provisioned circuit pack.
cpEntry	1.3.6.1.4.1.18070.2.2.1.3.2.1		not-accessible	The conceptual row object of the circuit pack table.
CPT cpTypeIdx	1.3.6.1.4.1.18070.2.2.1.3.2.1.1	CpType	accessible-for-notify	The specific type of circuit pack provisioned.
INT cpShelfIdx	1.3.6.1.4.1.18070.2.2.1.3.2.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the circuit pack is provisioned.
INT cpSlotIdx	1.3.6.1.4.1.18070.2.2.1.3.2.1.3	INTEGER	accessible-for-notify	The number of the slot in which the circuit pack is provisioned.
STR cpPEC	1.3.6.1.4.1.18070.2.2.1.3.2.1.4	DisplayString	read-create	Indicates the provisioned circuit pack Product Equipment Code. This is a mandatory object when a row of the circuit pack table is created. The PEC can only be set at the time of row creation, and it cannot be edited later.
ADM cpAdminStatus	1.3.6.1.4.1.18070.2.2.1.3.2.1.5	AdminStatus	read-create	The administrative status of the circuit pack.
OPE cpOperStatus	1.3.6.1.4.1.18070.2.2.1.3.2.1.6	OperStatus	read-only	The reported operational status of the circuit pack.
OPE cpOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.3.2.1.7	OperStatQlfr	read-only	A textual list of qualifiers of the reported operational status of the circuit pack.
STR cpId	1.3.6.1.4.1.18070.2.2.1.3.2.1.8	DisplayString	read-create	Textual data recorded by the user to describe the provisioned circuit pack in a manner useful to the user.
STR cpCustom1	1.3.6.1.4.1.18070.2.2.1.3.2.1.9	DisplayString	read-create	A variable length text string for operating company use.
STR cpCustom2	1.3.6.1.4.1.18070.2.2.1.3.2.1.10	DisplayString	read-create	A variable length text string for operating company use.
STR cpCustom3	1.3.6.1.4.1.18070.2.2.1.3.2.1.11	DisplayString	read-create	A variable length text string for operating company use.
UPG cpUpgradeStage	1.3.6.1.4.1.18070.2.2.1.3.2.1.12	UpgradeCompleteStage	accessible-for-notify	Used in notifications sent during the circuit pack software upgrade process. It indicates the stage of the circuit pack upgrade process that has been completed.
INT cpUpgradeResult	1.3.6.1.4.1.18070.2.2.1.3.2.1.13	INTEGER	accessible-for-notify	Indicates if the identified stage of the circuit pack upgrade process has resulted in success or failure.
ROW cpRowStatus	1.3.6.1.4.1.18070.2.2.1.3.2.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the circuit pack table, which in turn controls the provisioning and de-provisioning of circuit pack objects.
facilities	1.3.6.1.4.1.18070.2.2.1.4
oaTable	1.3.6.1.4.1.18070.2.2.1.4.1		not-accessible	This table contains one row for every provisioned optical amplifier facility on the NE. Each row contains a list of attributes that pertain to the optical amplifier.
oaEntry	1.3.6.1.4.1.18070.2.2.1.4.1.1		not-accessible	The conceptual row object of the optical amplifier table.
OAT oaTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.1.1.1	OaType	accessible-for-notify	The specific type of optical amplifier provisioned.
INT oaShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.1.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the optical amplifier facility is provisioned.
INT oaSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.1.1.3	INTEGER	accessible-for-notify	The number of the slot in which the optical amplifier facility is provisioned.
INT oaIdx	1.3.6.1.4.1.18070.2.2.1.4.1.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the optical amplifier facility is provisioned.
INT oaCaseTempMaxTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.5	INTEGER	read-create	The case temperature threshold.
INT oaCaseTempMaxShutdownTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.6	INTEGER	read-only	The case temperature shutdown threshold.
INT oaLaserTempMinShutdownTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.7	INTEGER	read-only	The laser temperature minimum shutdown threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
INT oaLaserTempMaxShutdownTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.8	INTEGER	read-only	The laser temperature maximum shutdown threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.9	FixedX10	read-create	The optical power received minimum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.10	FixedX10	read-create	The optical power received maximum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaSSIOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.11	FixedX10	read-create	The secondary stage input optical power received maximum threshold. This object is applicable only to OLAM type amplifiers.
FIX oaOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.12	FixedX10	read-create	The optical power transmitted minimum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.13	FixedX10	read-create	The optical power transmitted maximum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaBackReflectionSafetyTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.14	FixedX10	read-only	The optical back reflection safety threshold.
FIX oaMSInsertionLossMaxTh	1.3.6.1.4.1.18070.2.2.1.4.1.1.15	FixedX10	read-create	This is the mid-stage maximum insertion loss signal threshold. It applies to mid-stage access amplifiers only.
INT oaCaseTemp	1.3.6.1.4.1.18070.2.2.1.4.1.1.16	INTEGER	read-only	The optical amplifier case temperature.
INT oaLaser1Temp	1.3.6.1.4.1.18070.2.2.1.4.1.1.17	INTEGER	read-only	The temperature of the optical amplifier laser 1.
INT oaLaser2Temp	1.3.6.1.4.1.18070.2.2.1.4.1.1.18	INTEGER	read-only	The temperature of the optical amplifier laser 2.
FIX oaOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.1.1.19	FixedX10	read-only	The optical power received on the input of the amplifier.
FIX oaSSIOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.1.1.20	FixedX10	read-only	The optical power received on the second stage of the amplifier. It applies to mid-stage access amplifiers only.
FIX oaOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.1.1.21	FixedX10	read-only	The optical power transmitted at the output of the amplifier.
FIX oaMSInsertionLoss	1.3.6.1.4.1.18070.2.2.1.4.1.1.22	FixedX10	read-only	The mid-stage insertion loss. This object is only applicable to OLAM type amplifiers.
FIX oaEffectiveGain	1.3.6.1.4.1.18070.2.2.1.4.1.1.33	FixedX10	read-only	The effective gain level of the optical amplifier.
FIX oaFSOOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.1.1.34	FixedX10	read-only	The optical power transmitted at the output of the first stage of the amplifier. It applies to mid-stage access amplifiers only.
FIX oaLaser1Current	1.3.6.1.4.1.18070.2.2.1.4.1.1.35	FixedX10	read-only	The optical amplifier laser 1 current.
FIX oaLaser2Current	1.3.6.1.4.1.18070.2.2.1.4.1.1.36	FixedX10	read-only	The optical amplifier laser 2 current.
FIX oaLaser1Power	1.3.6.1.4.1.18070.2.2.1.4.1.1.37	FixedX10	read-only	The optical amplifier laser 1 power.
FIX oaLaser2Power	1.3.6.1.4.1.18070.2.2.1.4.1.1.38	FixedX10	read-only	The optical amplifier laser 2 power.
FIX oaOpticalBackReflection	1.3.6.1.4.1.18070.2.2.1.4.1.1.39	FixedX10	read-only	The optical back reflection of the amplifier.
FIX oaVariableOpticalAttenuation	1.3.6.1.4.1.18070.2.2.1.4.1.1.40	FixedX10	read-only	The variable optical attenuation of the amplifier.
ADM oaAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.1.1.41	AdminStatus	read-create	The administrative status of the optical amplifier.
OPE oaOperStatus	1.3.6.1.4.1.18070.2.2.1.4.1.1.42	OperStatus	read-only	The reported operational status of the optical amplifier.
OPE oaOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.1.1.43	OperStatQlfr	read-only	A textual list of qualifiers of the reported operational status of the optical amplifier.
HOU oaAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.1.1.44	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted optical amplifier. This value only applies if the oaAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00. The supported range of values is 000-00 to 096-00.
HOU oaActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.1.1.45	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer, if it is actively counting down. Otherwise, the value returned is 000-00.
INT oaModeSetting	1.3.6.1.4.1.18070.2.2.1.4.1.1.46	INTEGER	read-create	The desired mode of operation to which this optical amplifier is set.
FIX oaGainSetting	1.3.6.1.4.1.18070.2.2.1.4.1.1.47	FixedX10	read-create	The effective gain (excluding ASE) set point. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaPwrSetting	1.3.6.1.4.1.18070.2.2.1.4.1.1.48	FixedX10	read-create	The signal output power (excluding ASE) set point. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.
FIX oaTiltCompSetting	1.3.6.1.4.1.18070.2.2.1.4.1.1.49	FixedX10	read-create	The desired tilt compensation to which this optical amplifier is set.
INT oaStatus	1.3.6.1.4.1.18070.2.2.1.4.1.1.50	INTEGER	read-only	The specific operational status of the amplifier.
INT oaLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.1.1.51	INTEGER	read-only	The actual operational status of the optical amplifier laser.
STR oaId1	1.3.6.1.4.1.18070.2.2.1.4.1.1.52	DisplayString	read-create	Textual data recorded by the user to describe the provisioned optical amplifier in a manner useful to the user.
STR oaId2	1.3.6.1.4.1.18070.2.2.1.4.1.1.53	DisplayString	read-create	Textual data recorded by the user to describe the provisioned optical amplifier in a manner useful to the user.
FIB oaFiberType	1.3.6.1.4.1.18070.2.2.1.4.1.1.54	FiberType	read-create	An optional specification of the fiber type that interfaces with the optical amplifier.
WDM oaGrid	1.3.6.1.4.1.18070.2.2.1.4.1.1.55	WDMGrid	read-create	An optional indication of the WDM grid to which the link conforms.
INT oaNumChannels	1.3.6.1.4.1.18070.2.2.1.4.1.1.56	INTEGER	read-create	An optional indication of the number of channels that the link is carrying.
STR oaCustom1	1.3.6.1.4.1.18070.2.2.1.4.1.1.57	DisplayString	read-create	A variable length text string for operating company use.
STR oaCustom2	1.3.6.1.4.1.18070.2.2.1.4.1.1.58	DisplayString	read-create	A variable length text string for operating company use.
STR oaCustom3	1.3.6.1.4.1.18070.2.2.1.4.1.1.59	DisplayString	read-create	A variable length text string for operating company use.
FIX oaWavelength	1.3.6.1.4.1.18070.2.2.1.4.1.1.60	FixedX100	read-create	The wavelength transmitted from the OA port. This object applies only to single channel amplifiers (sba, spa).
STR oaRemoteId	1.3.6.1.4.1.18070.2.2.1.4.1.1.61	DisplayString	read-create	Identifies the remote node and port to which the optical amplifier port is connected, in the format prescribed by the PSM network management system.
ROW oaRowStatus	1.3.6.1.4.1.18070.2.2.1.4.1.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the optical amplifier table, which in turn controls provisioning and deprovisioning of optical amplifier facilities.
xcvrTable	1.3.6.1.4.1.18070.2.2.1.4.2		not-accessible	This table contains one row for every provisioned optical transceiver on a wavelength translator, regenerator or manager card. Each row contains a list of attributes that pertain to the transceiver.
xcvrEntry	1.3.6.1.4.1.18070.2.2.1.4.2.1		not-accessible	The conceptual row object of the optical transceiver table.
XCV xcvrTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.2.1.1	XcvrType	accessible-for-notify	The specific type of wavelength conversion function of the circuit pack on which the transceiver is provisioned.
INT xcvrShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.2.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the transceiver is provisioned.
INT xcvrSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.2.1.3	INTEGER	accessible-for-notify	The number of the slot within which the transceiver is provisioned.
INT xcvrIdx	1.3.6.1.4.1.18070.2.2.1.4.2.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the transceiver is provisioned.
FIX xcvrOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.2.1.5	FixedX10	read-only	This is the optical power received minimum threshold.
FIX xcvrOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.2.1.6	FixedX10	read-only	This is the optical power received maximum threshold.
FIX xcvrOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.2.1.7	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX xcvrOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.2.1.8	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX xcvrOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.2.1.9	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX xcvrOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.2.1.10	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
PRO xcvrProtSwEvtType	1.3.6.1.4.1.18070.2.2.1.4.2.1.11	ProtSwEvtType	accessible-for-notify	Indicates the type of protection switching event that has occured on an optical transceiver port.
STR xcvrPEC	1.3.6.1.4.1.18070.2.2.1.4.2.1.12	DisplayString	read-create	An optionally provisioned transceiver Product Equipment Code used to validate the physically present transceiver.
ADM xcvrAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.2.1.13	AdminStatus	read-create	The administrative status of the optical transceiver.
OPE xcvrOperStatus	1.3.6.1.4.1.18070.2.2.1.4.2.1.14	OperStatus	read-only	The reported operational status of the optical transceiver.
OPE xcvrOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.2.1.15	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the optical transceiver.
HOU xcvrAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.2.1.16	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted optical transceiver. This value only applies if the xcvrAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU xcvrActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.2.1.17	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
XCV xcvrProtocol	1.3.6.1.4.1.18070.2.2.1.4.2.1.18	XcvrProtocolType	read-create	The protocol of the service to be carried by the port. This is a mandatory object when a row of the transceiver table is created.
FIX xcvrWavelength	1.3.6.1.4.1.18070.2.2.1.4.2.1.19	FixedX100	read-create	The wavelength to be transmitted by the transceiver port. This is a mandatory object when a row of the transceiver table is created for ports that have a pluggable transceiver.
STR xcvrVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.2.1.20	DisplayString	read-create	An optionally provisioned part number used to validate the physically present transceiver.
STR xcvrVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.2.1.21	DisplayString	read-create	An optionally provisioned part number used to validate the physically present transceiver.
STR xcvrVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.2.1.22	DisplayString	read-create	An optionally provisioned part number used to validate the physically present transceiver.
INT xcvrPhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.2.1.23	INTEGER	read-create	Indicates if the port is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT xcvrFPSD	1.3.6.1.4.1.18070.2.2.1.4.2.1.24	INTEGER	read-create	Indicates if the port is configured for Fault Propagation Shut Down.
INT xcvrLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.2.1.25	INTEGER	read-only	An indication of the operational status of the transceiver laser.
STR xcvrId1	1.3.6.1.4.1.18070.2.2.1.4.2.1.26	DisplayString	read-create	Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.
STR xcvrId2	1.3.6.1.4.1.18070.2.2.1.4.2.1.27	DisplayString	read-create	Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.
FIB xcvrFiberType	1.3.6.1.4.1.18070.2.2.1.4.2.1.28	FiberType	read-create	An optional specification of the fiber type that interfaces to the optical transceiver.
WDM xcvrGrid	1.3.6.1.4.1.18070.2.2.1.4.2.1.29	WDMGrid	read-create	An optical indication of the WDM grid the link conforms.
STR xcvrCustom1	1.3.6.1.4.1.18070.2.2.1.4.2.1.30	DisplayString	read-create	A variable length text string for operating company use.
STR xcvrCustom2	1.3.6.1.4.1.18070.2.2.1.4.2.1.31	DisplayString	read-create	A variable length text string for operating company use.
STR xcvrCustom3	1.3.6.1.4.1.18070.2.2.1.4.2.1.32	DisplayString	read-create	A variable length text string for operating company use.
STR xcvrTraceLabel	1.3.6.1.4.1.18070.2.2.1.4.2.1.33	DisplayString	read-create	If specified, this attribute will describe the trace label to be used in the outgoing OTN or SONET/SDH trace.
STR xcvrExpectedTraceLabel	1.3.6.1.4.1.18070.2.2.1.4.2.1.34	DisplayString	read-create	This attribute will describe the trace label that is expected to be received in the incoming OTN or SONET/SDH trace. If specified, this expected trace label will be compared to the actual value for xcvrReceivedTraceLabel, and a trace mismatch alarm will be raised if the two trace labels do not match.
STR xcvrReceivedTraceLabel	1.3.6.1.4.1.18070.2.2.1.4.2.1.35	DisplayString	read-only	The actual received trace label on the incoming OTN or SONET/SDH trace.
BER xcvrSDBERTh	1.3.6.1.4.1.18070.2.2.1.4.2.1.36	BERType	read-create	The Bit Error Rate threshold above which the Signal Degrade condition is raised.
LOO xcvrLoopbackType	1.3.6.1.4.1.18070.2.2.1.4.2.1.37	LoopbackType	read-only	The loopback type that is currently active on the xcvr
STR xcvrRemoteId	1.3.6.1.4.1.18070.2.2.1.4.2.1.38	DisplayString	read-create	Identifies the remote node and port to which the transceiver port is connected, in the format prescribed by the PSM network management system.
ROW xcvrRowStatus	1.3.6.1.4.1.18070.2.2.1.4.2.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the Transceiver table, which in turn controls provisioning and deprovisioning of optical transceiver facilities.
amdTable	1.3.6.1.4.1.18070.2.2.1.4.3		not-accessible	This table contains one row for every provisioned active multiplexer-demultiplexer facility. AMD facilities include AMD line facilities and AMD channel facilities. Each row contains a list of attributes that pertain to one facility.
amdEntry	1.3.6.1.4.1.18070.2.2.1.4.3.1		not-accessible	The conceptual row object of the Active Mux-Demux table.
AMD amdTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.3.1.1	AmdType	accessible-for-notify	The specific type of active multiplexer-demultiplexer circuit pack on which the facility is provisioned.
INT amdShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.3.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the active multiplexer-demultiplexer facility is provisioned.
INT amdSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.3.1.3	INTEGER	accessible-for-notify	The number of the slot within which the active multiplexer-demultiplexer facility is provisioned.
INT amdLineIdx	1.3.6.1.4.1.18070.2.2.1.4.3.1.4	INTEGER	accessible-for-notify	The number of the multiplexed wavelength line on the AMD circuit pack.
AMD amdPortIdx	1.3.6.1.4.1.18070.2.2.1.4.3.1.5	AmdPortType	accessible-for-notify	Identifies a specific port on the identified line of the AMD circuit pack.
FIX amdOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.3.1.6	FixedX10	read-write	This is the optical power received minimum threshold.
FIX amdOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.3.1.7	FixedX10	read-write	This is the optical power received maximum threshold.
FIX amdOpticalPwrTransmittedTarget	1.3.6.1.4.1.18070.2.2.1.4.3.1.8	FixedX10	read-write	This is the optical power transmitted target level.
FIX amdOpticalAttenuationTarget	1.3.6.1.4.1.18070.2.2.1.4.3.1.9	FixedX10	read-write	This is the optical power attenuation target level.
FIX amdOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.3.1.10	FixedX10	accessible-for-notify	The optical input power received for the channel.
FIX amdOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.3.1.11	FixedX10	accessible-for-notify	The optical power level transmitted for the channel.
FIX amdOpticalAttentuation	1.3.6.1.4.1.18070.2.2.1.4.3.1.12	FixedX10	accessible-for-notify	The optical power attenuation for the line.
ADM amdAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.3.1.13	AdminStatus	read-write	The administrative status of the AMD port.
OPE amdOperStatus	1.3.6.1.4.1.18070.2.2.1.4.3.1.14	OperStatus	read-only	The reported operational status of the AMD port.
OPE amdOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.3.1.15	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the AMD port.
HOU amdAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.3.1.16	HoursAndMinutes	read-write	Specifies the auto-enable timer for the targeted AMD port. This value only applies if the amdAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU amdActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.3.1.17	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX amdWavelength	1.3.6.1.4.1.18070.2.2.1.4.3.1.18	FixedX100	read-only	The wavelength transmitted from the AMD port. This object applies only to channel ports.
STR amdId1	1.3.6.1.4.1.18070.2.2.1.4.3.1.19	DisplayString	read-write	Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.
STR amdId2	1.3.6.1.4.1.18070.2.2.1.4.3.1.20	DisplayString	read-write	Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.
FIB amdFiberType	1.3.6.1.4.1.18070.2.2.1.4.3.1.21	FiberType	read-write	An optional specification of the fiber type that interfaces to the AMD port.
WDM amdGrid	1.3.6.1.4.1.18070.2.2.1.4.3.1.22	WDMGrid	read-write	An optical indication of the WDM grid to which the AMD port link conforms.
STR amdCustom1	1.3.6.1.4.1.18070.2.2.1.4.3.1.23	DisplayString	read-write	A variable length text string for operating company use.
STR amdCustom2	1.3.6.1.4.1.18070.2.2.1.4.3.1.24	DisplayString	read-write	A variable length text string for operating company use.
STR amdCustom3	1.3.6.1.4.1.18070.2.2.1.4.3.1.25	DisplayString	read-write	A variable length text string for operating company use.
ROW amdRowStatus	1.3.6.1.4.1.18070.2.2.1.4.3.1.100	RowStatus	accessible-for-notify	The active multiplexer-demultiplexer table RowStatus object is not readable or writeable because all entries in the AMD table are automatically created and deleted when the AMD circuit pack is created or deleted. This AMD row status object is used only in database change notifications to indicate if the row has been created or deleted.
passivePortTable	1.3.6.1.4.1.18070.2.2.1.4.4		not-accessible	This table contains one row for each port on every provisioned passive circuit pack on the NE. Each list contains a list of attributes that pertain to the passive port.
passivePortEntry	1.3.6.1.4.1.18070.2.2.1.4.4.1		not-accessible	The conceptual row object of the passive circuit pack port table.
CPT passivePortCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.4.1.1	CpType	not-accessible	The type of circuit pack on which the passive port is found.
INT passivePortShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.4.1.2	INTEGER	not-accessible	The number of the shelf on which the passive circuit pack port is provisioned.
INT passivePortSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.4.1.3	INTEGER	not-accessible	The number of the slot within which the passive circuit pack port is provisioned.
INT passivePortLineIdx	1.3.6.1.4.1.18070.2.2.1.4.4.1.4	INTEGER	not-accessible	Identifies the multiplexed multi-channel optical facility instance associated with the targeted passive port.
PAS passivePortTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.4.1.5	PassivePortType	not-accessible	Identifies the specific passive port on the circuit pack according to function.
STR passivePortId1	1.3.6.1.4.1.18070.2.2.1.4.4.1.6	DisplayString	read-write	An optional name used to identify the passive circuit pack port facility.
STR passivePortId2	1.3.6.1.4.1.18070.2.2.1.4.4.1.7	DisplayString	read-write	An optional identifier for the passive circuit pack port circuit.
FIB passivePortFiberType	1.3.6.1.4.1.18070.2.2.1.4.4.1.8	FiberType	read-write	An optional specification of the fiber type interfacing the passive circuit pack port.
WDM passivePortGrid	1.3.6.1.4.1.18070.2.2.1.4.4.1.9	WDMGrid	read-write	An optional indication of the DWM grid that the link conforms to.
INT passivePortNumChannels	1.3.6.1.4.1.18070.2.2.1.4.4.1.10	INTEGER	read-write	An optional indication of the number of channels that the link is carrying. This field does not apply to individual channel type ports.
FIX passivePortWavelength	1.3.6.1.4.1.18070.2.2.1.4.4.1.11	FixedX100	read-only	An indication of the wavelength that the port is carrying.
STR passivePortCustom1	1.3.6.1.4.1.18070.2.2.1.4.4.1.12	DisplayString	read-write	A variable length text string for operating company use.
STR passivePortCustom2	1.3.6.1.4.1.18070.2.2.1.4.4.1.13	DisplayString	read-write	A variable length text string for operating company use.
STR passivePortCustom3	1.3.6.1.4.1.18070.2.2.1.4.4.1.14	DisplayString	read-write	A variable length text string for operating company use.
STR passivePortRemoteId	1.3.6.1.4.1.18070.2.2.1.4.4.1.15	DisplayString	read-create	Identifies the remote node and port to which the passive card port is connected, in the format prescribed by the PSM network management system.
ROW passivePortRowStatus	1.3.6.1.4.1.18070.2.2.1.4.4.1.100	RowStatus	accessible-for-notify	The passive port table RowStatus object is not readable or writeable because all entries in the passive port table are automatically created and deleted when the circuit pack is created or deleted. This passive port row status object is used only in database change notifications to indicate if the row has been created or deleted.
ocnTable	1.3.6.1.4.1.18070.2.2.1.4.5		not-accessible	This table contains one row for every provisioned SONET OC-N facility on the system. Each row contains a list of attributes that pertain to the facility.
ocnEntry	1.3.6.1.4.1.18070.2.2.1.4.5.1		not-accessible	The conceptual row object of the OC-N table.
OCN ocnTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.5.1.1	OcnType	accessible-for-notify	The specific type of OC-N signal which is provisioned.
INT ocnShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.5.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the OC-N facility is provisioned.
INT ocnSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.5.1.3	INTEGER	accessible-for-notify	The number of the slot within which the OC-N facility is provisioned.
INT ocnPortIdx	1.3.6.1.4.1.18070.2.2.1.4.5.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the OC-N facility is provisioned.
FIX ocnOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.5.1.5	FixedX10	read-only	This is the optical power received minimum threshold.
FIX ocnOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.5.1.6	FixedX10	read-only	This is the optical power received maximum threshold.
FIX ocnOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.5.1.7	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX ocnOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.5.1.8	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX ocnOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.5.1.9	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX ocnOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.5.1.10	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
BER ocnBER	1.3.6.1.4.1.18070.2.2.1.4.5.1.11	BERType	accessible-for-notify	The Bit Error Rate measured on the received signal.
BER ocnBERTh	1.3.6.1.4.1.18070.2.2.1.4.5.1.12	BERType	read-create	The Bit Error Rate threshold above which the Signal Degrade condition is raised.
STR ocnPEC	1.3.6.1.4.1.18070.2.2.1.4.5.1.13	DisplayString	read-create	An optionally provisioned Product Equipment Code used to validate the physically present optical transceiver on the OC-N port.
ADM ocnAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.5.1.14	AdminStatus	read-create	The administrative status of the OC-N facility.
OPE ocnOperStatus	1.3.6.1.4.1.18070.2.2.1.4.5.1.15	OperStatus	read-only	The reported operational status of the OC-N facility.
OPE ocnOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.5.1.16	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the OC-N facility.
HOU ocnAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.5.1.17	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted OC-N facility. This value only applies if the ocnAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU ocnActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.5.1.18	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX ocnWavelength	1.3.6.1.4.1.18070.2.2.1.4.5.1.19	FixedX100	read-create	The wavelength to be transmitted by the transceiver on the OC-N facility port. This is a mandatory object when a row of the OC-N table is created.
STR ocnVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.5.1.20	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the OC-N facility port.
STR ocnVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.5.1.21	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the OC-N facility port.
STR ocnVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.5.1.22	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the OC-N facility port.
INT ocnPhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.5.1.23	INTEGER	read-create	Indicates if the OC-N facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT ocnLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.5.1.24	INTEGER	read-only	An indication of the operational status of the transceiver laser on the OC-N facility port.
STR ocnId1	1.3.6.1.4.1.18070.2.2.1.4.5.1.25	DisplayString	read-create	Textual data recorded by the user to describe the provisioned OC-N facility in a manner useful to the user.
FIB ocnFiberType	1.3.6.1.4.1.18070.2.2.1.4.5.1.26	FiberType	read-create	An optional specification of the fiber type that interfaces to the OC-N facility port.
STR ocnCustom1	1.3.6.1.4.1.18070.2.2.1.4.5.1.27	DisplayString	read-create	A variable length text string for operating company use.
INT ocnTOHTransparency	1.3.6.1.4.1.18070.2.2.1.4.5.1.28	INTEGER	read-create	Used to configure whether the transport overhead of the the SONET OC-N facility is to be handled transparently or if it is to be terminated and regenerated. This object only applies to OC-48 client facilities on the 10G MXP circuit pack and the OC-12 and OC-3 client facilities on the 8-port 2.5G MXP circuit pack.
INT ocnLineMapping	1.3.6.1.4.1.18070.2.2.1.4.5.1.29	INTEGER	read-create	Used to configure the OTN configuration of the line port. If set to unmapped, there is no OTN digital wrapper added to the OC-192 or OC-48 facility. The odu1ToOtu2 and otu2 mapping is applicable to OC-192 line ports as follows: odu1ToOtu2 - the line port is configured as an OTN digitally wrapped OTU2 facility containing 4 ODU1 units. otu2 - the line port is configured as an OTN digitally wrapped OTU2 facility to which an OC-192 facility is directly mapped. The subOdu1ToOtu1 and otu1 mapping is applicable to OC-48 line ports as follows: subOdu1ToOtu1 - the line port is configured as an OTN digitally wrapped ODU1 facility containing 4 sub-ODU1 units. otu1 - the line port is configured as an OTN digitally wrapped OTU1 facility to which an OC-48 facility is directly mapped. This object applies only to the OC-192 line port of the 10G MXP circuit pack and the OC-48 line port of the 8-port 2.5G circuit pack.
PRO ocnProtSwEvtType	1.3.6.1.4.1.18070.2.2.1.4.5.1.30	ProtSwEvtType	accessible-for-notify	Indicates the type of protection switching event that has occured on an OC-N facility.
INT ocnDCCTransparency	1.3.6.1.4.1.18070.2.2.1.4.5.1.31	INTEGER	read-create	Used to configure whether the Data Communications Channel (DCC) is transported transparently through the circuit pack. Specifically, this refers to the D1, D2 and D3 section DCC bytes. This object only applies to OC-48 client facilities on the 10G MXP circuit pack and the OC-12 client facilities on the 8-port 2.5G MXP circuit pack.
INT ocnTransparencyChannel	1.3.6.1.4.1.18070.2.2.1.4.5.1.32	INTEGER	read-create	Used to configure the STS1 channel number on which the DCC is transported. This object only applies to OC-48 client facilities on the 10G MXP circuit pack and the OC-12 client facilities on the 8-port 2.5G MXP circuit pack.
STR ocnRemoteId	1.3.6.1.4.1.18070.2.2.1.4.5.1.33	DisplayString	read-create	Identifies the remote node and port to which the OC-n port is connected, in the format prescribed by the PSM network management system.
ROW ocnRowStatus	1.3.6.1.4.1.18070.2.2.1.4.5.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the OC-N table, which in turn controls provisioning and deprovisioning of OC-N facilities.
stsnTable	1.3.6.1.4.1.18070.2.2.1.4.6		not-accessible	This table contains one row for every created SONET STS-N facility on the system. Each row contains a list of attributes that pertain to the facility.
stsnEntry	1.3.6.1.4.1.18070.2.2.1.4.6.1		not-accessible	The conceptual row object of the STS-N table.
STS stsnTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.6.1.1	StsnType	accessible-for-notify	The specific type of STS-N signal which is created.
INT stsnShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.6.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the STS-N facility exists.
INT stsnSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.6.1.3	INTEGER	accessible-for-notify	The number of the slot within which the STS-N facility exists.
INT stsnPortIdx	1.3.6.1.4.1.18070.2.2.1.4.6.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the STS-N facility exists.
INT stsnIdx	1.3.6.1.4.1.18070.2.2.1.4.6.1.5	INTEGER	accessible-for-notify	The stsn channel number within the port in which the STS-N facility exists.
PRO stsnProtSwEvtType	1.3.6.1.4.1.18070.2.2.1.4.6.1.6	ProtSwEvtType	accessible-for-notify	Indicates the type of protection switching event that has occured on an STS-N facility.
BER stsnBER	1.3.6.1.4.1.18070.2.2.1.4.6.1.7	BERType	accessible-for-notify	The Bit Error Rate measured on the received channel.
BER stsnBERTh	1.3.6.1.4.1.18070.2.2.1.4.6.1.8	BERType	accessible-for-notify	The Bit Error Rate threshold above which the Signal Degrade condition is raised.
OPE stsnProtSwStatus	1.3.6.1.4.1.18070.2.2.1.4.6.1.9	OperStatQlfr	read-only	If the STS-N facility is configured as part of a protection grouping, this object indicates its protection status.
stmnTable	1.3.6.1.4.1.18070.2.2.1.4.7		not-accessible	This table contains one row for every provisioned SDH STM-N facility on the system. Each row contains a list of attributes that pertain to the facility.
stmnEntry	1.3.6.1.4.1.18070.2.2.1.4.7.1		not-accessible	The conceptual row object of the STM-N table.
STM stmnTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.7.1.1	StmnType	accessible-for-notify	The specific type of STM-N signal which is provisioned.
INT stmnShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.7.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the STM-N facility is provisioned.
INT stmnSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.7.1.3	INTEGER	accessible-for-notify	The number of the slot within which the STM-N facility is provisioned.
INT stmnPortIdx	1.3.6.1.4.1.18070.2.2.1.4.7.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the STM-N facility is provisioned.
FIX stmnOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.7.1.5	FixedX10	read-only	This is the optical power received minimum threshold.
FIX stmnOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.7.1.6	FixedX10	read-only	This is the optical power received maximum threshold.
FIX stmnOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.7.1.7	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX stmnOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.7.1.8	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX stmnOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.7.1.9	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX stmnOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.7.1.10	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
BER stmnBER	1.3.6.1.4.1.18070.2.2.1.4.7.1.11	BERType	accessible-for-notify	The Bit Error Rate measured on the received signal.
BER stmnBERTh	1.3.6.1.4.1.18070.2.2.1.4.7.1.12	BERType	read-create	The Bit Error Rate threshold above which the Signal Degrade condition is raised.
STR stmnPEC	1.3.6.1.4.1.18070.2.2.1.4.7.1.13	DisplayString	read-create	An optionally provisioned Product Equipment Code used to validate the physically present optical transceiver on the STM-N port.
ADM stmnAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.7.1.14	AdminStatus	read-create	The administrative status of the STM-N facility.
OPE stmnOperStatus	1.3.6.1.4.1.18070.2.2.1.4.7.1.15	OperStatus	read-only	The reported operational status of the STM-N facility.
OPE stmnOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.7.1.16	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the STM-N facility.
HOU stmnAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.7.1.17	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted STM-N facility. This value only applies if the stmnAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU stmnActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.7.1.18	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX stmnWavelength	1.3.6.1.4.1.18070.2.2.1.4.7.1.19	FixedX100	read-create	The wavelength to be transmitted by the transceiver on the STM-N facility port. This is a mandatory object when a row of the STM-N table is created.
STR stmnVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.7.1.20	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the STM-N facility port.
STR stmnVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.7.1.21	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the STM-N facility port.
STR stmnVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.7.1.22	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the STM-N facility port.
INT stmnPhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.7.1.23	INTEGER	read-create	Indicates if the STM-N facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT stmnLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.7.1.24	INTEGER	read-only	An indication of the operational status of the transceiver laser on the STM-N facility port.
STR stmnId1	1.3.6.1.4.1.18070.2.2.1.4.7.1.25	DisplayString	read-create	Textual data recorded by the user to describe the provisioned STM-N facility in a manner useful to the user.
FIB stmnFiberType	1.3.6.1.4.1.18070.2.2.1.4.7.1.26	FiberType	read-create	An optional specification of the fiber type that interfaces to the STM-N facility port.
STR stmnCustom1	1.3.6.1.4.1.18070.2.2.1.4.7.1.27	DisplayString	read-create	A variable length text string for operating company use.
INT stmnTOHTransparency	1.3.6.1.4.1.18070.2.2.1.4.7.1.28	INTEGER	read-create	Used to configure whether the transport overhead of the the SDH STM-N facility is to be handled transparently or if it is to be terminated and regenerated. This object only applies to STM-16 client facilities on the 10G MXP circuit pack and the STM-4 and STM-1 client facilities on the 8-port 2.5G MXP circuit pack.
INT stmnLineMapping	1.3.6.1.4.1.18070.2.2.1.4.7.1.29	INTEGER	read-create	Used to configure the OTN configuration of the line port. If set to unmapped, there is no OTN digital wrapper added to the STM-64 or STM-16 facility. The odu1ToOtu2 and otu2 mapping is applicable to STM-64 line ports as follows: odu1ToOtu2 - the line port is configured as an OTN digitally wrapped OTU2 facility containing 4 ODU1 units. otu2 - the line port is configured as an OTN digitally wrapped OTU2 facility to which an STM-64 facility is directly mapped. The subOdu1ToOtu1 and otu1 mapping is applicable to STM-16 line ports as follows: subOdu1ToOtu1 - the line port is configured as an OTN digitally wrapped ODU1 facility containing 4 sub-ODU1 units. otu1 - the line port is configured as an OTN digitally wrapped OTU1 facility to which an STM-16 facility is directly mapped. This object applies only to the STM-64 line port of the 10G MXP circuit pack and the STM-16 line port of the 8-port 2.5G circuit pack.
PRO stmnProtSwEvtType	1.3.6.1.4.1.18070.2.2.1.4.7.1.30	ProtSwEvtType	accessible-for-notify	Indicates the type of protection switching event that has occured on an STM-N facility.
INT stmnDCCTransparency	1.3.6.1.4.1.18070.2.2.1.4.7.1.31	INTEGER	read-create	Used to configure whether the Data Communications Channel (DCC) is transported transparently through the circuit pack. Specifically, this refers to the D1, D2 and D3 section DCC bytes. This object only applies to STM-16 client facilities on the 10G MXP circuit pack and the STM-4 client facilities on the 8-port 2.5G MXP circuit pack.
INT stmnTransparencyChannel	1.3.6.1.4.1.18070.2.2.1.4.7.1.32	INTEGER	read-create	Used to configure the VC4 channel number on which the DCC is transported. This object only applies to STM-16 client facilities on the 10G MXP circuit pack and the STM-4 client facilities on the 8-port 2.5G MXP circuit pack.
STR stmnRemoteId	1.3.6.1.4.1.18070.2.2.1.4.7.1.33	DisplayString	read-create	Identifies the remote node and port to which the STM-n port is connected, in the format prescribed by the PSM network management system.
ROW stmnRowStatus	1.3.6.1.4.1.18070.2.2.1.4.7.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the STM-N table, which in turn controls provisioning and deprovisioning of STM-N facilities.
vcnTable	1.3.6.1.4.1.18070.2.2.1.4.8		not-accessible	This table contains one row for every created SDH VC-N facility on the system. Each row contains a list of attributes that pertain to the facility.
vcnEntry	1.3.6.1.4.1.18070.2.2.1.4.8.1		not-accessible	The conceptual row object of the VC-N table.
VCN vcnTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.8.1.1	VcnType	accessible-for-notify	The specific type of VC-N signal which is created.
INT vcnShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.8.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the VC-N facility exists.
INT vcnSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.8.1.3	INTEGER	accessible-for-notify	The number of the slot within which the VC-N facility exists.
INT vcnPortIdx	1.3.6.1.4.1.18070.2.2.1.4.8.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the VC-N facility exists.
INT vcnIdx	1.3.6.1.4.1.18070.2.2.1.4.8.1.5	INTEGER	accessible-for-notify	The vcn channel number within the port in which the VC-N facility exists.
PRO vcnProtSwEvtType	1.3.6.1.4.1.18070.2.2.1.4.8.1.6	ProtSwEvtType	accessible-for-notify	Indicates the type of protection switching event that has occured on a VC-N facility.
BER vcnBER	1.3.6.1.4.1.18070.2.2.1.4.8.1.7	BERType	accessible-for-notify	The Bit Error Rate measured on the received channel.
BER vcnBERTh	1.3.6.1.4.1.18070.2.2.1.4.8.1.8	BERType	accessible-for-notify	The Bit Error Rate threshold above which the Signal Degrade condition is raised.
OPE vcnProtSwStatus	1.3.6.1.4.1.18070.2.2.1.4.8.1.9	OperStatQlfr	read-only	If the VC-N facility is configured as part of a protection grouping, this object indicates its protection status.
geTable	1.3.6.1.4.1.18070.2.2.1.4.9		not-accessible	This table contains one row for every provisioned Gigabit Ethernet (GE) facility on the system. Each row contains a list of attributes that pertain to the facility.
geEntry	1.3.6.1.4.1.18070.2.2.1.4.9.1		not-accessible	The conceptual row object of the GE table.
INT geShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.9.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the GE facility is provisioned.
INT geSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.9.1.2	INTEGER	accessible-for-notify	The number of the slot within which the GE facility is provisioned.
INT gePortIdx	1.3.6.1.4.1.18070.2.2.1.4.9.1.3	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the GE facility is provisioned.
FIX geOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.9.1.4	FixedX10	read-only	This is the optical power received minimum threshold.
FIX geOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.9.1.5	FixedX10	read-only	This is the optical power received maximum threshold.
FIX geOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.9.1.6	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX geOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.9.1.7	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX geOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.9.1.8	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX geOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.9.1.9	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
STR gePEC	1.3.6.1.4.1.18070.2.2.1.4.9.1.10	DisplayString	read-create	An optionally provisioned transceiver Product Equipment Code used to validate the physically present transceiver on the Gigabit Ethernet port.
ADM geAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.9.1.11	AdminStatus	read-create	The administrative status of the Gigabit Ethernet facility.
OPE geOperStatus	1.3.6.1.4.1.18070.2.2.1.4.9.1.12	OperStatus	read-only	The reported operational status of the Gigabit Ethernet facility.
OPE geOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.9.1.13	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the Gigabit Ethernet facility.
HOU geAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.9.1.14	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted Gigabit Ethernet facility. This value only applies if the geAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU geActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.9.1.15	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX geWavelength	1.3.6.1.4.1.18070.2.2.1.4.9.1.16	FixedX100	read-create	The wavelength to be transmitted by the transceiver on the Gigabit Ethernet facility port. This is a mandatory object when a row of the Gigabit Ethernet table is created.
STR geVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.9.1.17	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the Gigabit Ethernet facility port.
STR geVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.9.1.18	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the Gigabit Ethernet facility port.
STR geVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.9.1.19	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the Gigabit Ethernet facility port.
INT gePhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.9.1.20	INTEGER	read-create	Indicates if the Gigabit Ethernet facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT geFPSD	1.3.6.1.4.1.18070.2.2.1.4.9.1.21	INTEGER	read-create	Indicates if the Gigabit Ethernet facility is configured for Fault Propagation Shut Down.
INT geLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.9.1.22	INTEGER	read-only	An indication of the operational status of the transceiver laser on the Gigabit Ethernet facility port.
STR geId1	1.3.6.1.4.1.18070.2.2.1.4.9.1.23	DisplayString	read-create	Textual data recorded by the user to describe the provisioned Gigabit Ethernet facility in a manner useful to the user.
FIB geFiberType	1.3.6.1.4.1.18070.2.2.1.4.9.1.24	FiberType	read-create	An optional specification of the fiber type that interfaces to the Gigabit Ethernet facility port.
STR geCustom1	1.3.6.1.4.1.18070.2.2.1.4.9.1.25	DisplayString	read-create	A variable length text string for operating company use.
G32 geSpeedEx	1.3.6.1.4.1.18070.2.2.1.4.9.1.26	Gauge32	read-only	The speed of the Gigabit Ethernet facility link.
DUP geDuplex	1.3.6.1.4.1.18070.2.2.1.4.9.1.27	DuplexModeType	read-only	The duplex mode of the Gigabit Ethernet facility interface.
MED geMediaRate	1.3.6.1.4.1.18070.2.2.1.4.9.1.28	MediaRateType	read-create	The configured media rate of the Gigabit Ethernet facility interface.
I32 geMTU	1.3.6.1.4.1.18070.2.2.1.4.9.1.29	Integer32	read-only	The MTU size for the Gigabit Ethernet facility interface.
MAC geMACAddr	1.3.6.1.4.1.18070.2.2.1.4.9.1.30	MacAddress	read-only	The MAC address of the Gigabit Ethernet facility interface.
INT geGfpMode	1.3.6.1.4.1.18070.2.2.1.4.9.1.31	INTEGER	read-create	Configures the mapping of GE facility port onto the line port using either framed or transparent general framing protocol.
INT geFlowControl	1.3.6.1.4.1.18070.2.2.1.4.9.1.32	INTEGER	read-create	Configures the flow control setting of GE facility as transparent or locally enabled.
STR geRemoteId	1.3.6.1.4.1.18070.2.2.1.4.9.1.33	DisplayString	read-create	Identifies the remote node and port to which the gigabit ethernet port is connected, in the format prescribed by the PSM network management system.
ROW geRowStatus	1.3.6.1.4.1.18070.2.2.1.4.9.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the Gigabit Ethernet table, which in turn controls provisioning and deprovisioning of Gigabit Ethernet facilities.
feTable	1.3.6.1.4.1.18070.2.2.1.4.10		not-accessible	This table contains one row for every provisioned Fast Ethernet (FE) facility on the system. Each row contains a list of attributes that pertain to the facility.
feEntry	1.3.6.1.4.1.18070.2.2.1.4.10.1		not-accessible	The conceptual row object of the FE table.
INT feShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.10.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the FE facility is provisioned.
INT feSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.10.1.2	INTEGER	accessible-for-notify	The number of the slot within which the FE facility is provisioned.
INT fePortIdx	1.3.6.1.4.1.18070.2.2.1.4.10.1.3	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the FE facility is provisioned.
STR feId1	1.3.6.1.4.1.18070.2.2.1.4.10.1.4	DisplayString	read-create	Textual data recorded by the user to describe the provisioned Fast Ethernet facility in a manner useful to the user.
STR feCustom1	1.3.6.1.4.1.18070.2.2.1.4.10.1.5	DisplayString	read-create	A variable length text string for operating company use.
G32 feSpeed	1.3.6.1.4.1.18070.2.2.1.4.10.1.6	Gauge32	read-only	The speed of the Fast Ethernet facility link.
DUP feDuplex	1.3.6.1.4.1.18070.2.2.1.4.10.1.7	DuplexModeType	read-only	The duplex mode of the Fast Ethernet facility interface.
MED feMediaRate	1.3.6.1.4.1.18070.2.2.1.4.10.1.8	MediaRateType	read-only	The configured media rate of the Fast Ethernet facility interface.
I32 feMTU	1.3.6.1.4.1.18070.2.2.1.4.10.1.9	Integer32	read-only	The MTU size for the Fast Ethernet facility interface.
MAC feMACAddr	1.3.6.1.4.1.18070.2.2.1.4.10.1.10	MacAddress	read-only	The MAC address of the Fast Ethernet facility interface.
STR feRemoteId	1.3.6.1.4.1.18070.2.2.1.4.10.1.11	DisplayString	read-create	Identifies the remote node and port to which the fast ethernet port is connected, in the format prescribed by the PSM network management system.
ROW feRowStatus	1.3.6.1.4.1.18070.2.2.1.4.10.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the Fast Ethernet table, which in turn controls provisioning and deprovisioning of Fast Ethernet facilities.
vcgTable	1.3.6.1.4.1.18070.2.2.1.4.11		not-accessible	This table contains one row for every provisioned Virtual Concatenation Group (VCG) enitity on the system. Each row contains a list of attributes that pertain to the VCG.
vcgEntry	1.3.6.1.4.1.18070.2.2.1.4.11.1		not-accessible	The conceptual row object of the VCG table.
INT vcgShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.11.1.1	INTEGER	not-accessible	The number of the shelf on which the VCG entity is located.
INT vcgSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.11.1.2	INTEGER	not-accessible	The number of the slot within which the VCG entity is located.
INT vcgPortIdx	1.3.6.1.4.1.18070.2.2.1.4.11.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the VCG entity is located.
INT vcgIdx	1.3.6.1.4.1.18070.2.2.1.4.11.1.4	INTEGER	not-accessible	The number of the VCG within the identified port.
INT vcgType	1.3.6.1.4.1.18070.2.2.1.4.11.1.5	INTEGER	read-create	The format of the VCG.
STR vcgTimeSlotIndices	1.3.6.1.4.1.18070.2.2.1.4.11.1.6	DisplayString	read-create	A textual listing of the time slot indices used for the VCG. The information is formatted as a comma-separated list of of individual time slot indices or time slot index ranges. For example, a value of 'X-Y,Z' indicates that the VCG includes all time slots in the range of X to Y, plus Z, when X, Y, and Z are all integers.
ROW vcgRowStatus	1.3.6.1.4.1.18070.2.2.1.4.11.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the VCG table, which in turn controls provisioning and deprovisioning of Virtual Concatenation groups. Manual creation and deletion of VCGs is supported only on the 10G MXP, as all VCGs on the 2.5G MXP are auto-created and deleted.
fcTable	1.3.6.1.4.1.18070.2.2.1.4.12		not-accessible	This table contains one row for every provisioned fiber channel facility on the system. Each row contains a list of attributes that pertain to the facility.
fcEntry	1.3.6.1.4.1.18070.2.2.1.4.12.1		not-accessible	The conceptual row object of the fiber channel table.
INT fcShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.12.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the fiber channel facility is provisioned.
INT fcSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.12.1.2	INTEGER	accessible-for-notify	The number of the slot within which the fiber channel facility is provisioned.
INT fcPortIdx	1.3.6.1.4.1.18070.2.2.1.4.12.1.3	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the fiber channel facility is provisioned.
INT fcRate	1.3.6.1.4.1.18070.2.2.1.4.12.1.4	INTEGER	read-create	The rate of the fiber channel signal which is provisioned.
FIX fcOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.12.1.5	FixedX10	read-only	This is the optical power received minimum threshold.
FIX fcOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.12.1.6	FixedX10	read-only	This is the optical power received maximum threshold.
FIX fcOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.12.1.7	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX fcOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.12.1.8	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX fcOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.12.1.9	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX fcOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.12.1.10	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
STR fcPEC	1.3.6.1.4.1.18070.2.2.1.4.12.1.11	DisplayString	read-create	An optionally provisioned Product Equipment Code used to validate the physically present optical transceiver on the fiber channel port.
ADM fcAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.12.1.12	AdminStatus	read-create	The administrative status of the fiber channel facility.
OPE fcOperStatus	1.3.6.1.4.1.18070.2.2.1.4.12.1.13	OperStatus	read-only	The reported operational status of the fiber channel facility.
OPE fcOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.12.1.14	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the fiber channel facility.
HOU fcAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.12.1.15	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted fiber channel facility. This value only applies if the fcAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU fcActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.12.1.16	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX fcWavelength	1.3.6.1.4.1.18070.2.2.1.4.12.1.17	FixedX100	read-create	The wavelength to be transmitted by the transceiver on the fiber channel facility port. This is a mandatory object when a row of the fiber channel table is created.
STR fcVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.12.1.18	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the fiber channel facility port.
STR fcVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.12.1.19	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the fiber channel facility port.
STR fcVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.12.1.20	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the fiber channel facility port.
INT fcPhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.12.1.21	INTEGER	read-create	Indicates if the fiber channel facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT fcFPSD	1.3.6.1.4.1.18070.2.2.1.4.12.1.22	INTEGER	read-create	Indicates if the Fiber Channel facility is configured for Fault Propagation Shut Down.
INT fcLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.12.1.23	INTEGER	read-only	An indication of the operational status of the transceiver laser on the fiber channel facility port.
STR fcId1	1.3.6.1.4.1.18070.2.2.1.4.12.1.24	DisplayString	read-create	Textual data recorded by the user to describe the provisioned fiber channel facility in a manner useful to the user.
FIB fcFiberType	1.3.6.1.4.1.18070.2.2.1.4.12.1.25	FiberType	read-create	An optional specification of the fiber type that interfaces to the fiber channel facility port.
STR fcCustom1	1.3.6.1.4.1.18070.2.2.1.4.12.1.26	DisplayString	read-create	A variable length text string for operating company use.
INT fcGfpMode	1.3.6.1.4.1.18070.2.2.1.4.12.1.27	INTEGER	read-create	Configures the mapping of fiber channel facility port onto the line port using GFP. Only the transparent mapping is supported for fiber channel facilities.
STR fcRemoteId	1.3.6.1.4.1.18070.2.2.1.4.12.1.28	DisplayString	read-create	Identifies the remote node and port to which the fiber channel port is connected, in the format prescribed by the PSM network management system.
ROW fcRowStatus	1.3.6.1.4.1.18070.2.2.1.4.12.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the fiber channel table, which in turn controls provisioning and deprovisioning of fiber channel facilities.
ethIntfTable	1.3.6.1.4.1.18070.2.2.1.4.14		not-accessible	This table contains one row for every provisioned Ethernet facility on the system. Each row contains a list of attributes that pertain to the facility.
ethIntfEntry	1.3.6.1.4.1.18070.2.2.1.4.14.1		not-accessible	The conceptual row object of the ethIntfTable table.
INT ethIntfShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.14.1.1	INTEGER	accessible-for-notify	The number of the shelf in which the Ethernet facility resides.
INT ethIntfSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.14.1.2	INTEGER	accessible-for-notify	The number of the slot in which the Ethernet facility resides.
PVX ethIntfPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.14.1.3	PvxL1PortType	accessible-for-notify	The type of the port on the circuit pack.
INT ethIntfPortIdx	1.3.6.1.4.1.18070.2.2.1.4.14.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the ethernet facility is provisioned.
FIX ethIntfOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.14.1.5	FixedX10	read-only	This is the optical power received minimum threshold.
FIX ethIntfOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.14.1.6	FixedX10	read-only	This is the optical power received maximum threshold.
FIX ethIntfOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.14.1.7	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX ethIntfOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.14.1.8	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX ethIntfOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.14.1.9	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX ethIntfOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.14.1.10	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
STR ethIntfPEC	1.3.6.1.4.1.18070.2.2.1.4.14.1.11	DisplayString	read-create	An optionally provisioned transceiver Product Equipment Code used to validate the physically present transceiver on the Ethernet port.
INT ethIntfAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.14.1.12	INTEGER	read-create	The administrative status of the Ethernet facility.
OPE ethIntfOperStatus	1.3.6.1.4.1.18070.2.2.1.4.14.1.13	OperStatus	read-only	The reported operational status of the Ethernet facility.
OPE ethIntfOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.14.1.14	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the Ethernet facility.
HOU ethIntfAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.14.1.15	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted Ethernet facility. This value only applies if the AdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU ethIntfActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.14.1.16	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX ethIntfWavelength	1.3.6.1.4.1.18070.2.2.1.4.14.1.17	FixedX100	read-create	The wavelength to be transmitted by the transceiver on the Gigabit Ethernet facility port. This is a mandatory object when a row of the Ethernet table is created.
STR ethIntfVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.14.1.18	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the Ethernet facility port.
STR ethIntfVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.14.1.19	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the Ethernet facility port.
STR ethIntfVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.14.1.20	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the Ethernet facility port.
INT ethIntfPhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.14.1.21	INTEGER	read-create	Indicates if the Ethernet facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT ethIntfFPSD	1.3.6.1.4.1.18070.2.2.1.4.14.1.22	INTEGER	read-create	Indicates if the Ethernet facility is configured for Fault Propagation Shut Down.
INT ethIntfLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.14.1.23	INTEGER	read-only	An indication of the operational status of the transceiver laser on the Ethernet facility port.
STR ethIntfId1	1.3.6.1.4.1.18070.2.2.1.4.14.1.24	DisplayString	read-create	Textual data recorded by the user to describe the provisioned facility in a manner useful to the user.
FIB ethIntfFiberType	1.3.6.1.4.1.18070.2.2.1.4.14.1.25	FiberType	read-create	An optional specification of the fiber type that interfaces to the Ethernet facility port.
STR ethIntfCustom1	1.3.6.1.4.1.18070.2.2.1.4.14.1.26	DisplayString	read-create	A variable length text string for operating company use.
G32 ethIntfSpeed	1.3.6.1.4.1.18070.2.2.1.4.14.1.27	Gauge32	read-only	The speed of the Ethernet facility link. This object is mandatory to create a new facility and determines the type of interface, based on speed.
INT ethIntfDuplex	1.3.6.1.4.1.18070.2.2.1.4.14.1.28	INTEGER	read-only	The duplex mode of the Ethernet facility interface.
MED ethIntfMediaRate	1.3.6.1.4.1.18070.2.2.1.4.14.1.29	MediaRateType	read-create	The configured media rate of the Ethernet facility interface. For 10 GE interfaces, the media rate can only be autoNegotiated.
INT ethIntfMTU	1.3.6.1.4.1.18070.2.2.1.4.14.1.30	INTEGER	read-create	The MTU size for the Ethernet facility interface.
INT ethIntfLinkStatus	1.3.6.1.4.1.18070.2.2.1.4.14.1.31	INTEGER	read-only	This object provides the link status information regarding the particular interface.
INT ethIntfLagId	1.3.6.1.4.1.18070.2.2.1.4.14.1.32	INTEGER	read-only	This object provides the information regarding the LAG Id of the particular interface.
I32 ethIntfLagPortPriority	1.3.6.1.4.1.18070.2.2.1.4.14.1.33	Integer32	read-create	This object provides the information for lag port priority of the particular interface.
BER ethIntfBER	1.3.6.1.4.1.18070.2.2.1.4.14.1.37	BERType	read-create	The Signal Degrade Bit Error Ratio (SDBER) is used to configure the error rate threshold above which a Signal Degrade is declared.
MAC ethIntfMACAddr	1.3.6.1.4.1.18070.2.2.1.4.14.1.39	MacAddress	read-only	The MAC address of the interface.
INT ethIntfLineMapping	1.3.6.1.4.1.18070.2.2.1.4.14.1.40	INTEGER	read-create	For 10 GE interfaces, both 10 GE LAN PHY and OTU2 encapsulated 10GE LAN PHY will be supported. The line mapping attribute allow provisioning of either of the protocol. This attributes applies to 10 GE interfaces only. When a 10 GE interface is configured as a stacking port, this field is set to stacking. NOTE: This parameter does not apply to gigabitEthernet type interfaces, attempts to set this for gigE port types will fail. Reading this object for non-10GigE interfaces will return notApplicable.
INT ethIntfErrorCorrection	1.3.6.1.4.1.18070.2.2.1.4.14.1.41	INTEGER	read-create	For 10G in OTU2 line-mapping mode, this object specifies the error correction mode. For interfaces in tenlanphy line-mapping mode, this object must be none. Attempts to set it to any other value while in tenglanphy mode will fail. NOTE: This parameter does not apply to gigabitEthernet type interfaces, attempts to set this for gigE port types will fail.
INT ethIntfLpbkOpCmd	1.3.6.1.4.1.18070.2.2.1.4.14.1.42	INTEGER	read-write	Used to perform a loopback operation on a transceiver facility as follows: - oprLpbk: operates a loopback on the transceiver - rlsLpbk: causes a previously invoked loopback to be released When read, this object returns noOp.
STR ethIntfRemoteId	1.3.6.1.4.1.18070.2.2.1.4.14.1.43	DisplayString	read-create	Identifies the remote node and port to which the PVX ethernet port is connected, in the format prescribed by the PSM network management system.
MIR ethIntfMirrorConfig	1.3.6.1.4.1.18070.2.2.1.4.14.1.44	MirrorConfigType	read-write	Mirror configuration for the physical ethernet port
INT ethIntfLldpAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.14.1.45	INTEGER	read-write	The administratively desired status of the local LLDP agent. If the associated ethIntfLldpAdminStatus object has a value of 'enabled(1)', then the LLDP agent will transmit and receive LLDP frames on this port. If the associated ethIntfLldpAdminStatus object has a value of 'disabled(2)', then LLDP agent will not transmit or receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's ethIntfLldpAdminStatus becomes disabled, then the information will naturally age out.
LLD ethIntfLldpRemChassisIdSubtype	1.3.6.1.4.1.18070.2.2.1.4.14.1.46	LldpChassisIdSubtype	read-only	The type of encoding used to identify the chassis associated with the remote system.
LLD ethIntfLldpRemChassisId	1.3.6.1.4.1.18070.2.2.1.4.14.1.47	LldpChassisId	read-only	The string value used to identify the chassis component associated with the remote system.
LLD ethIntfLldpRemPortIdSubtype	1.3.6.1.4.1.18070.2.2.1.4.14.1.48	LldpPortIdSubtype	read-only	The type of port identifier encoding used in the associated 'ethIntfLldpRemPortId' object.
LLD ethIntfLldpRemPortId	1.3.6.1.4.1.18070.2.2.1.4.14.1.49	LldpPortId	read-only	The string value used to identify the port component associated with the remote system.
I32 ethIntfBouncingStateChangeCount	1.3.6.1.4.1.18070.2.2.1.4.14.1.50	Integer32	read-only	Count of the Ethernet facility operational state changes sinse last reboot
ROW ethIntfRowStatus	1.3.6.1.4.1.18070.2.2.1.4.14.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the Ethernet table, which in turn controls provisioning and deprovisioning of Ethernet facilities.
odunTable	1.3.6.1.4.1.18070.2.2.1.4.15		not-accessible	This table contains one row for every ODU-N facility on the system.
odunEntry	1.3.6.1.4.1.18070.2.2.1.4.15.1		not-accessible	The conceptual row object of the ODU-N table.
ODU odunTypeIdx	1.3.6.1.4.1.18070.2.2.1.4.15.1.1	OdunType	accessible-for-notify	The specific type of ODU-N which is provisioned.
INT odunShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.15.1.2	INTEGER	accessible-for-notify	The number of the shelf on which the ODU-N facility is provisioned.
INT odunSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.15.1.3	INTEGER	accessible-for-notify	The number of the slot within which the ODU-N facility is provisioned.
INT odunPortIdx	1.3.6.1.4.1.18070.2.2.1.4.15.1.4	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the ODU-N facility is provisioned.
INT odunIdx	1.3.6.1.4.1.18070.2.2.1.4.15.1.5	INTEGER	accessible-for-notify	The ODU-N channel number within the port in which the ODU-N facility exists.
briTable	1.3.6.1.4.1.18070.2.2.1.4.16		not-accessible	This table contains one row for every provisioned Bit Rate Independent (BRI) facility on the system. Each row contains a list of attributes that pertain to the facility.
briEntry	1.3.6.1.4.1.18070.2.2.1.4.16.1		not-accessible	The conceptual row object of the BRI table.
INT briShelfIdx	1.3.6.1.4.1.18070.2.2.1.4.16.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the BRI facility is provisioned.
INT briSlotIdx	1.3.6.1.4.1.18070.2.2.1.4.16.1.2	INTEGER	accessible-for-notify	The number of the slot within which the BRI facility is provisioned.
INT briPortIdx	1.3.6.1.4.1.18070.2.2.1.4.16.1.3	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the BRI facility is provisioned.
INT briProtocol	1.3.6.1.4.1.18070.2.2.1.4.16.1.4	INTEGER	read-create	The protocol of the BRI signal which is provisioned.
FIX briOpticalPwrReceivedMinTh	1.3.6.1.4.1.18070.2.2.1.4.16.1.5	FixedX10	read-only	This is the optical power received minimum threshold.
FIX briOpticalPwrReceivedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.16.1.6	FixedX10	read-only	This is the optical power received maximum threshold.
FIX briOpticalPwrTransmittedMinTh	1.3.6.1.4.1.18070.2.2.1.4.16.1.7	FixedX10	read-only	This is the optical power transmitted minimum threshold.
FIX briOpticalPwrTransmittedMaxTh	1.3.6.1.4.1.18070.2.2.1.4.16.1.8	FixedX10	read-only	This is the optical power transmitted maximum threshold.
FIX briOpticalPwrReceived	1.3.6.1.4.1.18070.2.2.1.4.16.1.9	FixedX10	accessible-for-notify	The optical power received on the input of the transceiver.
FIX briOpticalPwrTransmitted	1.3.6.1.4.1.18070.2.2.1.4.16.1.10	FixedX10	accessible-for-notify	The optical power transmitted at the output of the transceiver.
STR briPEC	1.3.6.1.4.1.18070.2.2.1.4.16.1.11	DisplayString	read-create	An optionally provisioned Product Equipment Code used to validate the physically present optical transceiver on the BRI port.
ADM briAdminStatus	1.3.6.1.4.1.18070.2.2.1.4.16.1.12	AdminStatus	read-create	The administrative status of the BRI facility.
OPE briOperStatus	1.3.6.1.4.1.18070.2.2.1.4.16.1.13	OperStatus	read-only	The reported operational status of the BRI facility.
OPE briOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.4.16.1.14	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the BRI facility.
HOU briAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.16.1.15	HoursAndMinutes	read-create	Specifies the auto-enable timer for the targeted BRI facility. This value only applies if the briAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.
HOU briActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.4.16.1.16	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
FIX briWavelength	1.3.6.1.4.1.18070.2.2.1.4.16.1.17	FixedX100	read-create	The wavelength to be transmitted by the transceiver on the BRI facility port. This is a mandatory object when a row of the fiber channel table is created.
STR briVendorPN1	1.3.6.1.4.1.18070.2.2.1.4.16.1.18	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the BRI facility port.
STR briVendorPN2	1.3.6.1.4.1.18070.2.2.1.4.16.1.19	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the BRI facility port.
STR briVendorPN3	1.3.6.1.4.1.18070.2.2.1.4.16.1.20	DisplayString	read-create	An optionally provisioned part number used to validate the optical transceiver on the BRI facility port.
INT briPhyPMMon	1.3.6.1.4.1.18070.2.2.1.4.16.1.21	INTEGER	read-create	Indicates if the BRI facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.
INT briLaserStatus	1.3.6.1.4.1.18070.2.2.1.4.16.1.22	INTEGER	read-only	An indication of the operational status of the transceiver laser on the BRI facility port.
STR briId1	1.3.6.1.4.1.18070.2.2.1.4.16.1.23	DisplayString	read-create	Textual data recorded by the user to describe the provisioned BRI facility in a manner useful to the user.
FIB briFiberType	1.3.6.1.4.1.18070.2.2.1.4.16.1.24	FiberType	read-create	An optional specification of the fiber type that interfaces to the BRI facility port.
STR briCustom1	1.3.6.1.4.1.18070.2.2.1.4.16.1.25	DisplayString	read-create	A variable length text string for operating company use.
FIX briBitRate	1.3.6.1.4.1.18070.2.2.1.4.16.1.26	FixedX100	read-only	The bit rate transmitted by the BRI facility port in Mbps.
STR briRemoteId	1.3.6.1.4.1.18070.2.2.1.4.16.1.27	DisplayString	read-create	Identifies the remote node and port to which the Bitrate Independent port is connected, in the format prescribed by the PSM network management system.
ROW briRowStatus	1.3.6.1.4.1.18070.2.2.1.4.16.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the BRI table, which in turn controls provisioning and deprovisioning of BRI facilities.
dataComms	1.3.6.1.4.1.18070.2.2.1.5
oscTable	1.3.6.1.4.1.18070.2.2.1.5.1		not-accessible	This table contains one row for every provisioned optical supervisory channel interface on the NE. Each row contains a list of attributes that pertain to the OSC.
oscEntry	1.3.6.1.4.1.18070.2.2.1.5.1.1		not-accessible	The conceptual row object of the optical supervisory channel table.
INT oscShelfIdx	1.3.6.1.4.1.18070.2.2.1.5.1.1.1	INTEGER	accessible-for-notify	The number of the shelf on which the OSC is provisioned.
INT oscSlotIdx	1.3.6.1.4.1.18070.2.2.1.5.1.1.2	INTEGER	accessible-for-notify	The number of the slot in which the OSC is provisioned.
INT oscIdx	1.3.6.1.4.1.18070.2.2.1.5.1.1.3	INTEGER	accessible-for-notify	The number of the port on the circuit pack on which the OSC is provisioned.
ADM oscAdminStatus	1.3.6.1.4.1.18070.2.2.1.5.1.1.4	AdminStatus	read-create	The administrative status of the OSC interface.
OPE oscOperStatus	1.3.6.1.4.1.18070.2.2.1.5.1.1.5	OperStatus	read-only	The reported operational status of the OSC interface.
OPE oscOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.5.1.1.6	OperStatQlfr	read-only	A textual list of qualifiers for the reported operational status of the OSC interface.
STR oscCustom1	1.3.6.1.4.1.18070.2.2.1.5.1.1.7	DisplayString	read-create	A variable length text string for operating company use.
INT oscType	1.3.6.1.4.1.18070.2.2.1.5.1.1.8	INTEGER	read-only	The type of physical communication medium attached to the OSC interface.
T/F oscUnmbrd	1.3.6.1.4.1.18070.2.2.1.5.1.1.9	TruthValue	read-only	Indicates whether or not the OSC interface is the type that requires an IP address to be assigned.
G32 oscSpeed	1.3.6.1.4.1.18070.2.2.1.5.1.1.10	Gauge32	read-only	The speed of the OSC link.
DUP oscDuplex	1.3.6.1.4.1.18070.2.2.1.5.1.1.11	DuplexModeType	read-only	The duplex mode of the OSC interface.
MED oscMediaRate	1.3.6.1.4.1.18070.2.2.1.5.1.1.12	MediaRateType	read-only	The configured media rate of the OSC interface.
I32 oscMTU	1.3.6.1.4.1.18070.2.2.1.5.1.1.13	Integer32	read-only	The MTU size for the OSC interface.
MAC oscMACAddr	1.3.6.1.4.1.18070.2.2.1.5.1.1.14	MacAddress	read-only	The MAC address of the OSC interface.
IP oscIPAddr	1.3.6.1.4.1.18070.2.2.1.5.1.1.15	IpAddress	read-create	The IP Address of the OSC interface. A value of 0.0.0.0 indicates that the interface is not assigned an IP address.
IP oscIPMask	1.3.6.1.4.1.18070.2.2.1.5.1.1.16	IpAddress	read-create	The IP Subnet Mask of the OSC interface.
IP oscIPBcast	1.3.6.1.4.1.18070.2.2.1.5.1.1.17	IpAddress	read-only	The IP broadcast address of the OSC interface.
ROW oscRowStatus	1.3.6.1.4.1.18070.2.2.1.5.1.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the OSC table, which in turn controls provisioning and deprovisioning of OSC interfaces.
netMgmtTable	1.3.6.1.4.1.18070.2.2.1.5.2		not-accessible	This table contains one row for every network management interface on the NE. Each row contains a list of attributes that pertain to the interface.
netMgmtEntry	1.3.6.1.4.1.18070.2.2.1.5.2.1		not-accessible	The conceptual row object of the network management interface table.
INT netMgmtIdx	1.3.6.1.4.1.18070.2.2.1.5.2.1.1	INTEGER	not-accessible	Identifies the specific management interface.
ADM netMgmtAdminStatus	1.3.6.1.4.1.18070.2.2.1.5.2.1.2	AdminStatus	read-write	The administrative status of the management interface.
OPE netMgmtOperStatus	1.3.6.1.4.1.18070.2.2.1.5.2.1.3	OperStatus	read-only	The reported operational status of the management interface.
OPE netMgmtOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.5.2.1.4	OperStatQlfr	read-only	A textual list of qualifiers for the reported operational status of the management interface.
IP netMgmtIPAddr	1.3.6.1.4.1.18070.2.2.1.5.2.1.5	IpAddress	read-write	The IP Address of the management interface.
IP netMgmtIPMask	1.3.6.1.4.1.18070.2.2.1.5.2.1.6	IpAddress	read-write	The IP Subnet Mask of the management interface.
IP netMgmtIPBcast	1.3.6.1.4.1.18070.2.2.1.5.2.1.7	IpAddress	read-only	The IP broadcast address of the management interface.
STR netMgmtCustom1	1.3.6.1.4.1.18070.2.2.1.5.2.1.8	DisplayString	read-write	A variable length text string for operating company use.
INT netMgmtType	1.3.6.1.4.1.18070.2.2.1.5.2.1.9	INTEGER	read-only	The type of physical communication medium attached to the management interface.
T/F netMgmtUnmbrd	1.3.6.1.4.1.18070.2.2.1.5.2.1.10	TruthValue	read-only	Indicates whether or not the management interface is the type that requires an IP address to be assigned.
G32 netMgmtSpeed	1.3.6.1.4.1.18070.2.2.1.5.2.1.11	Gauge32	read-only	The speed of the management interface link.
DUP netMgmtDuplex	1.3.6.1.4.1.18070.2.2.1.5.2.1.12	DuplexModeType	read-only	The duplex mode of the management interface.
MED netMgmtMediaRate	1.3.6.1.4.1.18070.2.2.1.5.2.1.13	MediaRateType	read-only	The configured media rate of the management interface.
I32 netMgmtMTU	1.3.6.1.4.1.18070.2.2.1.5.2.1.14	Integer32	read-only	The MTU size for this management interface.
MAC netMgmtMACAddr	1.3.6.1.4.1.18070.2.2.1.5.2.1.15	MacAddress	read-only	The MAC address of the management interface.
serialTable	1.3.6.1.4.1.18070.2.2.1.5.3		not-accessible	A table of serial communication ports on the network element. Each row contains a list of attributes that pertain to a given serial port.
serialEntry	1.3.6.1.4.1.18070.2.2.1.5.3.1		not-accessible	The conceptual row object for the serial port table.
INT serialPortIdx	1.3.6.1.4.1.18070.2.2.1.5.3.1.1	INTEGER	not-accessible	The serial port instance on the NE.
U32 serialBaudRate	1.3.6.1.4.1.18070.2.2.1.5.3.1.2	Unsigned32	read-write	The baud rate of the serial port.
INT serialDataBits	1.3.6.1.4.1.18070.2.2.1.5.3.1.3	INTEGER	read-write	The number of data bits of the serial port.
INT serialParity	1.3.6.1.4.1.18070.2.2.1.5.3.1.4	INTEGER	read-write	The parity value of the serial port.
INT serialStopBits	1.3.6.1.4.1.18070.2.2.1.5.3.1.5	INTEGER	read-write	The number of stop bits of the serial port.
gcc0ConfigTable	1.3.6.1.4.1.18070.2.2.1.5.4		not-accessible	A table of GCC0 configuration information. This table contains one row for every provisioned GCC0.
gcc0ConfigEntry	1.3.6.1.4.1.18070.2.2.1.5.4.1		not-accessible	A conceptual row that contains GCC0 configuration information of an interface. Each instance must correspond to an instance of an OTN Port capable of supporting GCC. Instances of this conceptual row persist across agent restarts.
CPT gcc0ConfigCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.5.4.1.1	CpType	not-accessible	The specific type of circuit pack provisioned.
INT gcc0ConfigShelfIdx	1.3.6.1.4.1.18070.2.2.1.5.4.1.2	INTEGER	not-accessible	The number of the shelf on which the gcc0 is provisioned.
INT gcc0ConfigSlotIdx	1.3.6.1.4.1.18070.2.2.1.5.4.1.3	INTEGER	not-accessible	The number of the slot in which the gcc0 is provisioned.
INT gcc0ConfigPortIdx	1.3.6.1.4.1.18070.2.2.1.5.4.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the gcc0 provisioned.
INT gcc0ConfigMode	1.3.6.1.4.1.18070.2.2.1.5.4.1.5	INTEGER	read-create	The desired mode to which the gcc0 is to be provisioned.
ADM gcc0ConfigAdminStatus	1.3.6.1.4.1.18070.2.2.1.5.4.1.6	AdminStatus	read-create	The administrative status of the gcc.
OPE gcc0ConfigOperStatus	1.3.6.1.4.1.18070.2.2.1.5.4.1.7	OperStatus	read-only	The reported operational status of the gcc.
OPE gcc0ConfigOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.5.4.1.8	OperStatQlfr	read-only	A textual list of qualifiers of the reported operational status of the gcc.
ROW gcc0ConfigRowStatus	1.3.6.1.4.1.18070.2.2.1.5.4.1.9	RowStatus	read-create	This columnar object is used for creating and deleting a conceptual row of the gcc0 config table.
ipExtInterfaceTable	1.3.6.1.4.1.18070.2.2.1.5.5		not-accessible
ipExtInterfaceTableEntry	1.3.6.1.4.1.18070.2.2.1.5.5.1		not-accessible
I32 pvxL2IntfSubPortNumber	1.3.6.1.4.1.18070.2.2.1.5.5.1.1	Integer32	not-accessible	A number indentifying a entity smaller than and contained in a port. At this time, this value is unused and must be zero.
OPE ipExtIntfPrimaryState	1.3.6.1.4.1.18070.2.2.1.5.5.1.2	OperStatus	read-only	The reported operational status of the IP Interface.
OPE ipExtIntfSecondaryState	1.3.6.1.4.1.18070.2.2.1.5.5.1.3	OperStatQlfr	read-only	A textual list of qualifiers for the reported operational status of the IP Interface
OPE ipExtIntfCmdPrimaryState	1.3.6.1.4.1.18070.2.2.1.5.5.1.4	OperStatus	read-only
T/F ipExtIntfNumberedStatus	1.3.6.1.4.1.18070.2.2.1.5.5.1.5	TruthValue	read-create	Set to true if this is a numbered interface and false if it is unnumbered.
IPt ipExtIntfAddressType	1.3.6.1.4.1.18070.2.2.1.5.5.1.6	InetAddressType	read-only	The type of addresses (v4/v6) used in this row of this MIB. Currently only ipv4 is allowed in this table.
IP ipExtIntfAddress	1.3.6.1.4.1.18070.2.2.1.5.5.1.7	InetAddress	read-only	The IP Address associated with the interface.
IP ipExtIntfSubnetMask	1.3.6.1.4.1.18070.2.2.1.5.5.1.8	InetAddress	read-only	The sub-net mask associated with the interface.
T/F ipExtIntfProxyARPStatus	1.3.6.1.4.1.18070.2.2.1.5.5.1.9	TruthValue	read-only	Not currently implemented.
STR ipExtIntfDescription	1.3.6.1.4.1.18070.2.2.1.5.5.1.10	DisplayString	read-only	A string describing the interface.
MAC ipExtIntfMACAddr	1.3.6.1.4.1.18070.2.2.1.5.5.1.11	MacAddress	read-only	The MAC address associated with the interface, if applicable. All zeros for a non-MAC interface.
OPE ipExtIntfOperStatus	1.3.6.1.4.1.18070.2.2.1.5.5.1.12	OperStatus	read-only
INT ipExtIntfType	1.3.6.1.4.1.18070.2.2.1.5.5.1.13	INTEGER	read-only	A value describing the type of interface.
IP ipExtIntfBroadcastAddress	1.3.6.1.4.1.18070.2.2.1.5.5.1.14	InetAddress	read-only	The broadcast address associated with the interface.
G32 ipExtIntfSpeed	1.3.6.1.4.1.18070.2.2.1.5.5.1.15	Gauge32	read-only
DUP ipExtIntfMode	1.3.6.1.4.1.18070.2.2.1.5.5.1.16	DuplexModeType	read-only	Is the interface full or half-duplex?
I32 ipExtIntfMTUSize	1.3.6.1.4.1.18070.2.2.1.5.5.1.17	Integer32	read-only	The Maximum Transmission Unit for the interface.
I32 ipExtIntfLastChange	1.3.6.1.4.1.18070.2.2.1.5.5.1.18	Integer32	read-only
IP ipExtIntfGateway	1.3.6.1.4.1.18070.2.2.1.5.5.1.19	InetAddress	read-only	The gateway IP address associated with the interface.
ROW ipExtIntfRowStatus	1.3.6.1.4.1.18070.2.2.1.5.5.1.100	RowStatus	read-only	This columnar object is used for creating and deleting a conceptual row of the ipExtIntf table.
performance	1.3.6.1.4.1.18070.2.2.1.6
oaCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.1		not-accessible	A table of current performance monitoring statistics collected for the optical amplifier facilities on the NE.
oaCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.1.1		not-accessible	The row entry object of the optical amplifier current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical amplifier.
OAT oaCrntPMOaTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.1.1.1	OaType	not-accessible	The type of the optical amplifier targeted for PM retrieval.
INT oaCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.1.1.2	INTEGER	not-accessible	The number of the shelf on which the amplifier targeted for PMs is provisioned.
INT oaCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.1.1.3	INTEGER	not-accessible	The number of the slot within which the optical amplifier targeted for PMs is provisioned.
INT oaCrntPMOaIdx	1.3.6.1.4.1.18070.2.2.1.6.1.1.4	INTEGER	not-accessible	The number of the amplifier port on which the circuit pack for PMs is targeted.
NUM oaCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.1.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT oaCrntPMCaseTempValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.6	INTEGER	read-only	The optical amplifier case temperature.
DAT oaCrntPMCaseTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.7	DateAndTime	read-only	The date and time stamp of the case temperature value.
PMV oaCrntPMCaseTempValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.8	PMValidity	read-only	Indicates the validity of the provided case temperature value.
INT oaCrntPMLaser1TempValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.9	INTEGER	read-only	The optical amplifier laser 1 temperature.
DAT oaCrntPMLaser1TempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.10	DateAndTime	read-only	The date and time stamp of the laser 1 temperature value.
PMV oaCrntPMLaser1TempValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.11	PMValidity	read-only	Indicates the validity of the provided laser 1 temperature value.
INT oaCrntPMLaser2TempValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.12	INTEGER	read-only	The optical amplifier laser 2 temperature.
DAT oaCrntPMLaser2TempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.13	DateAndTime	read-only	The date and time stamp of the laser 2 temperature value.
PMV oaCrntPMLaser2TempValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.14	PMValidity	read-only	Indicates the validity of the provided laser 2 temperature value.
FIX oaCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.15	FixedX10	read-only	The optical power received on the input of the amplifer.
DAT oaCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.16	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV oaCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.17	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX oaCrntPMSSIOPRValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.18	FixedX10	read-only	The optical power received on the input of the second stage of the amplifier.
DAT oaCrntPMSSIOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.19	DateAndTime	read-only	The date and time stamp of the second stage input optical power received value.
PMV oaCrntPMSSIOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.20	PMValidity	read-only	Indicates the validity of the provided second stage input optical power received value.
FIX oaCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.21	FixedX10	read-only	The optical power transmitted at the output of the amplifier.
DAT oaCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.22	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV oaCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.23	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
FIX oaCrntPMMSInsLossValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.24	FixedX10	read-only	The mid-stage insertion loss.
DAT oaCrntPMMSInsLossTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.25	DateAndTime	read-only	The date and time stamp of the mid-stage insertion loss value.
PMV oaCrntPMMSInsLossValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.26	PMValidity	read-only	Indicates the validity of the provided mid-stage insertion loss value.
FIX oaCrntPMEffectiveGainValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.27	FixedX10	read-only	The effective gain of the optical amplifier. This reading is compensated for amplified spontaneous emissions.
DAT oaCrntPMEffectiveGainTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.28	DateAndTime	read-only	The date and time stamp of the effective gain value.
PMV oaCrntPMEffectiveGainValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.29	PMValidity	read-only	Indicates the validity of the provided effective gain value.
FIX oaCrntPMFSOOPTValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.30	FixedX10	read-only	The optical power transmitted at the output of the first stage of the amplifier.
DAT oaCrntPMFSOOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.31	DateAndTime	read-only	The date and time stamp of the first stage output optical power transmitted value.
PMV oaCrntPMFSOOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.32	PMValidity	read-only	Indicates the validity of the provided first stage output optical power transmitted value.
FIX oaCrntPMLaser1CurrentValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.33	FixedX10	read-only	The optical amplifier laser 1 current.
DAT oaCrntPMLaser1CurrentTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.34	DateAndTime	read-only	The date and time stamp of the laser 1 current value.
PMV oaCrntPMLaser1CurrentValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.35	PMValidity	read-only	Indicates the validity of the provided laser 1 current value.
FIX oaCrntPMLaser2CurrentValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.36	FixedX10	read-only	The optical amplifier laser 2 current.
DAT oaCrntPMLaser2CurrentTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.37	DateAndTime	read-only	The date and time stamp of the laser 2 current value.
PMV oaCrntPMLaser2CurrentValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.38	PMValidity	read-only	Indicates the validity of the provided laser 2 current value.
FIX oaCrntPMLaser1PowerValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.39	FixedX10	read-only	The optical amplifier laser 1 power.
DAT oaCrntPMLaser1PowerTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.40	DateAndTime	read-only	The date and time stamp of the laser 1 power value.
PMV oaCrntPMLaser1PowerValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.41	PMValidity	read-only	Indicates the validity of the provided laser 1 power value.
FIX oaCrntPMLaser2PowerValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.42	FixedX10	read-only	The optical amplifier laser 2 power.
DAT oaCrntPMLaser2PowerTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.43	DateAndTime	read-only	The date and time stamp of the laser 2 power value.
PMV oaCrntPMLaser2PowerValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.44	PMValidity	read-only	Indicates the validity of the provided laser 2 power value.
FIX oaCrntPMOBRValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.45	FixedX10	read-only	The back reflected optical power measured at the output of the second stage of the optical amplifier.
DAT oaCrntPMOBRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.46	DateAndTime	read-only	The date and time stamp of the optical back reflection value.
PMV oaCrntPMOBRValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.47	PMValidity	read-only	Indicates the validity of the provided optical back reflection value.
FIX oaCrntPMVOAValue	1.3.6.1.4.1.18070.2.2.1.6.1.1.48	FixedX10	read-only	The variable optical attenuation of the amplifier.
DAT oaCrntPMVOATimeStamp	1.3.6.1.4.1.18070.2.2.1.6.1.1.49	DateAndTime	read-only	The date and time stamp of the variable optical attenuation value.
PMV oaCrntPMVOAValidity	1.3.6.1.4.1.18070.2.2.1.6.1.1.50	PMValidity	read-only	Indicates the validity of the provided variable optical attenuation value.
oaHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.2		not-accessible	A table of historical performance monitoring statistics collected for the optical amplifier facilities on the NE.
oaHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.2.1		not-accessible	The row entry object of the optical amplifier historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given optical amplifier.
OAT oaHistPMOaTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.2.1.1	OaType	not-accessible	The type of the optical amplifier targeted for PM retrieval.
INT oaHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.2.1.2	INTEGER	not-accessible	The number of the shelf on which the amplifier targeted for PMs is provisioned.
INT oaHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.2.1.3	INTEGER	not-accessible	The number of the slot within which the optical amplifier targeted for PMs is provisioned.
INT oaHistPMOaIdx	1.3.6.1.4.1.18070.2.2.1.6.2.1.4	INTEGER	not-accessible	The number of the amplifier port on the circuit pack targeted for PMs.
NUM oaHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.2.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT oaHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.2.1.6	INTEGER	not-accessible	The specific PM bin number. The range is 1..96 for 15-minute bins, and for 1-day historical bins, the value is 1.
INT oaHistPMCaseTempValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.7	INTEGER	read-only	The optical amplifier case temperature.
DAT oaHistPMCaseTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.8	DateAndTime	read-only	The date and time stamp of the case temperature value.
PMV oaHistPMCaseTempValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.9	PMValidity	read-only	Indicates the validity of the provided case temperature value.
INT oaHistPMLaser1TempValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.10	INTEGER	read-only	The optical amplifier laser 1 temperature.
DAT oaHistPMLaser1TempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.11	DateAndTime	read-only	The date and time stamp of the laser 1 temperature value.
PMV oaHistPMLaser1TempValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.12	PMValidity	read-only	Indicates the validity of the provided laser 1 temperature value.
INT oaHistPMLaser2TempValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.13	INTEGER	read-only	The optical amplifier laser 2 temperature.
DAT oaHistPMLaser2TempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.14	DateAndTime	read-only	The date and time stamp of the laser 2 temperature value.
PMV oaHistPMLaser2TempValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.15	PMValidity	read-only	Indicates the validity of the provided laser 2 temperature value.
FIX oaHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.16	FixedX10	read-only	The optical power received on the input of the amplifer.
DAT oaHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.17	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV oaHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.18	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX oaHistPMSSIOPRValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.19	FixedX10	read-only	The optical power received on the input of the second stage of the amplifier.
DAT oaHistPMSSIOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.20	DateAndTime	read-only	The date and time stamp of the second stage input optical power received value.
PMV oaHistPMSSIOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.21	PMValidity	read-only	Indicates the validity of the provided second stage input optical power received value.
FIX oaHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.22	FixedX10	read-only	The optical power transmitted at the output of the amplifier.
DAT oaHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.23	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV oaHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.24	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
FIX oaHistPMMSInsLossValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.25	FixedX10	read-only	The mid-stage insertion loss.
DAT oaHistPMMSInsLossTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.26	DateAndTime	read-only	The date and time stamp of the mid-stage insertion loss value.
PMV oaHistPMMSInsLossValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.27	PMValidity	read-only	Indicates the validity of the provided mid-stage insertion loss value.
FIX oaHistPMEffectiveGainValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.28	FixedX10	read-only	The effective gain of the optical amplifier. This reading is compensated for amplified spontaneous emissions.
DAT oaHistPMEffectiveGainTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.29	DateAndTime	read-only	The date and time stamp of the effective gain value.
PMV oaHistPMEffectiveGainValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.30	PMValidity	read-only	Indicates the validity of the provided effective gain value.
FIX oaHistPMFSOOPTValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.31	FixedX10	read-only	The optical power transmitted at the output of the first stage of the amplifier.
DAT oaHistPMFSOOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.32	DateAndTime	read-only	The date and time stamp of the first stage output optical power transmitted value.
PMV oaHistPMFSOOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.33	PMValidity	read-only	Indicates the validity of the provided first stage output optical power transmitted value.
FIX oaHistPMLaser1CurrentValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.34	FixedX10	read-only	The optical amplifier laser 1 current.
DAT oaHistPMLaser1CurrentTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.35	DateAndTime	read-only	The date and time stamp of the laser 1 current value.
PMV oaHistPMLaser1CurrentValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.36	PMValidity	read-only	Indicates the validity of the provided laser 1 current value.
FIX oaHistPMLaser2CurrentValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.37	FixedX10	read-only	The optical amplifier laser 2 current.
DAT oaHistPMLaser2CurrentTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.38	DateAndTime	read-only	The date and time stamp of the laser 2 current value.
PMV oaHistPMLaser2CurrentValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.39	PMValidity	read-only	Indicates the validity of the provided laser 2 current value.
FIX oaHistPMLaser1PowerValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.40	FixedX10	read-only	The optical amplifier laser 1 power.
DAT oaHistPMLaser1PowerTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.41	DateAndTime	read-only	The date and time stamp of the laser 1 power value.
PMV oaHistPMLaser1PowerValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.42	PMValidity	read-only	Indicates the validity of the provided laser 1 power value.
FIX oaHistPMLaser2PowerValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.43	FixedX10	read-only	The optical amplifier laser 2 power.
DAT oaHistPMLaser2PowerTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.44	DateAndTime	read-only	The date and time stamp of the laser 2 power value.
PMV oaHistPMLaser2PowerValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.45	PMValidity	read-only	Indicates the validity of the provided laser 2 power value.
FIX oaHistPMOBRValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.46	FixedX10	read-only	The back reflected optical power measured at the output of the second stage of the optical amplifier.
DAT oaHistPMOBRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.47	DateAndTime	read-only	The date and time stamp of the optical back reflection value.
PMV oaHistPMOBRValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.48	PMValidity	read-only	Indicates the validity of the provided optical back reflection value.
FIX oaHistPMVOAValue	1.3.6.1.4.1.18070.2.2.1.6.2.1.49	FixedX10	read-only	The variable optical attenuation of the amplifier.
DAT oaHistPMVOATimeStamp	1.3.6.1.4.1.18070.2.2.1.6.2.1.50	DateAndTime	read-only	The date and time stamp of the variable optical attenuation value.
PMV oaHistPMVOAValidity	1.3.6.1.4.1.18070.2.2.1.6.2.1.51	PMValidity	read-only	Indicates the validity of the provided variable optical attenuation value.
xcvrCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.3		not-accessible	A table of current performance monitoring statistics collected for the optical transceiver facilities on the NE.
xcvrCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.3.1		not-accessible	The row entry object of the optical transceiver current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical transceiver.
XCV xcvrCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.3.1.1	XcvrType	not-accessible	The type of the optical transceiver targeted for PMs.
INT xcvrCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.3.1.2	INTEGER	not-accessible	The shelf number on which the optical transceiver targeted for PMs is provisioned.
INT xcvrCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.3.1.3	INTEGER	not-accessible	The slot number on which the optical transceiver targeted for PMs is provisioned.
INT xcvrCrntPMIdx	1.3.6.1.4.1.18070.2.2.1.6.3.1.4	INTEGER	not-accessible	The optical transceiver port number on the circuit pack that is targeted for PMs.
NUM xcvrCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.3.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX xcvrCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.6	FixedX10	read-only	The optical power received on the input of the transceiver.
DAT xcvrCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV xcvrCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX xcvrCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.9	FixedX10	read-only	The optical power transmitted at the output of the transceiver.
DAT xcvrCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV xcvrCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT xcvrCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.12	INTEGER	read-only	The optical transceiver temperature.
DAT xcvrCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV xcvrCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX xcvrCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.15	FixedX10	read-only	The transceiver supply voltage.
DAT xcvrCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV xcvrCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT xcvrCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.18	INTEGER	read-only	The transceiver laser bias current.
DAT xcvrCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.19	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV xcvrCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.20	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 xcvrCrntPMCVSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.21	Unsigned32	read-write	The count of coding violations at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrCrntPMCVSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.22	DateAndTime	read-only	The date and time stamp of the section layer coding violations value.
PMV xcvrCrntPMCVSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.23	PMValidity	read-only	Indicates the validity of the provided section layer coding violations value.
U32 xcvrCrntPMESSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.24	Unsigned32	read-write	The count of errored seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrCrntPMESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.25	DateAndTime	read-only	The date and time stamp of the section layer errored seconds value.
PMV xcvrCrntPMESSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.26	PMValidity	read-only	Indicates the validity of the provided section layer errored seconds value.
U32 xcvrCrntPMSESSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.27	Unsigned32	read-write	The count of severely errored seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrCrntPMSESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.28	DateAndTime	read-only	The date and time stamp of the section layer severely errored seconds value.
PMV xcvrCrntPMSESSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.29	PMValidity	read-only	Indicates the validity of the provided section layer severely errored seconds value.
U32 xcvrCrntPMSEFSSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.30	Unsigned32	read-write	The count of severely errored framing seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrCrntPMSEFSSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.31	DateAndTime	read-only	The date and time stamp of the section layer severely errored framing seconds value.
PMV xcvrCrntPMSEFSSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.32	PMValidity	read-only	Indicates the validity of the provided section layer severely errored framing seconds value.
U32 xcvrCrntPMRSEBValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.33	Unsigned32	read-write	The count of regenerator section errored blocks. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrCrntPMRSEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.34	DateAndTime	read-only	The date and time stamp of the regenerator section errored blocks value.
PMV xcvrCrntPMRSEBValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.35	PMValidity	read-only	Indicates the validity of the provided regenerator section errored blocks value.
U32 xcvrCrntPMRSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.36	Unsigned32	read-write	The count of regenerator section background block errors. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrCrntPMRSBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.37	DateAndTime	read-only	The date and time stamp of the regenerator section background block errors value.
PMV xcvrCrntPMRSBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.38	PMValidity	read-only	Indicates the validity of the provided regenerator section background block errors value.
U32 xcvrCrntPMRSESValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.39	Unsigned32	read-write	The count of regenerator section errored seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrCrntPMRSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.40	DateAndTime	read-only	The date and time stamp of the regenerator section errored seconds value.
PMV xcvrCrntPMRSESValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.41	PMValidity	read-only	Indicates the validity of the provided regenerator section errored seconds value.
U32 xcvrCrntPMRSSESValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.42	Unsigned32	read-write	The count of regenerator section severely errored seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrCrntPMRSSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.43	DateAndTime	read-only	The date and time stamp of the regenerator section severely errored seconds value.
PMV xcvrCrntPMRSSESValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.44	PMValidity	read-only	Indicates the validity of the provided regenerator section severely errored seconds value.
U32 xcvrCrntPMRSOFSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.45	Unsigned32	read-write	The count of regenerator section out-of-frame seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrCrntPMRSOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.46	DateAndTime	read-only	The date and time stamp of the regenerator section out-of-frame seconds value.
PMV xcvrCrntPMRSOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.47	PMValidity	read-only	Indicates the validity of the provided regenerator section out-of-frame seconds value.
U32 xcvrCrntPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.48	Unsigned32	read-write	The count of coding violations. This object applies only to transciever ports provisioned for the gigabit ethernet protocol or a fiber channel protocol.
DAT xcvrCrntPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.49	DateAndTime	read-only	The date and time stamp of the coding violations value.
PMV xcvrCrntPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.50	PMValidity	read-only	Indicates the validity of the provided coding violations value.
U32 xcvrCrntPMESValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.51	Unsigned32	read-write	The count of errored seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
DAT xcvrCrntPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.52	DateAndTime	read-only	The date and time stamp of the errored seconds value.
PMV xcvrCrntPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.53	PMValidity	read-only	Indicates the validity of the provided errored seconds value.
U32 xcvrCrntPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.54	Unsigned32	read-write	The count of severely errored seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
DAT xcvrCrntPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.55	DateAndTime	read-only	The date and time stamp of the severely errored seconds value.
PMV xcvrCrntPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.56	PMValidity	read-only	Indicates the validity of the provided severely errored seconds value.
U32 xcvrCrntPMINVBLKValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.57	Unsigned32	read-write	The count of invalid blocks. This object applies only to transciever ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMINVBLKTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.58	DateAndTime	read-only	The date and time stamp of the invalid blocks value.
PMV xcvrCrntPMINVBLKValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.59	PMValidity	read-only	Indicates the validity of the provided invalid blocks value.
U32 xcvrCrntPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.60	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrCrntPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.61	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV xcvrCrntPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.62	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
U32 xcvrCrntPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.63	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrCrntPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.64	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV xcvrCrntPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.65	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
U32 xcvrCrntPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.66	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrCrntPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.67	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV xcvrCrntPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.68	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
UNS xcvrCrntPMTBYCRXValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.69	Unsigned64	read-only	The total number of bytes of data (including those in bad frames) received (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMTBYCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.70	DateAndTime	read-only	The date and time stamp of the received bytes count value.
PMV xcvrCrntPMTBYCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.71	PMValidity	read-only	Indicates the validity of the provided received bytes count value.
INI xcvrCrntPMTBYCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.72	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMTBYCRXValue object to 0.
UNS xcvrCrntPMTFRCRXValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.73	Unsigned64	read-only	The total number of received frames (incl. bad frames, broadcast frames, and multicast frames received). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMTFRCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.74	DateAndTime	read-only	The date and time stamp of the total received frames count value.
PMV xcvrCrntPMTFRCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.75	PMValidity	read-only	Indicates the validity of the provided received frames count value.
INI xcvrCrntPMTFRCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.76	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMTFRCRXValue object to 0.
UNS xcvrCrntPMBCSTValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.77	Unsigned64	read-only	The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMBCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.78	DateAndTime	read-only	The date and time stamp of the broadcast packets received count value.
PMV xcvrCrntPMBCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.79	PMValidity	read-only	Indicates the validity of the provided broadcast packets received count value.
INI xcvrCrntPMBCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.80	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMBCSTValue object to 0.
UNS xcvrCrntPMMCSTValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.81	Unsigned64	read-only	The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMMCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.82	DateAndTime	read-only	The date and time stamp of the multicast packets received count value.
PMV xcvrCrntPMMCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.83	PMValidity	read-only	Indicates the validity of the provided multicast packets received count value.
INI xcvrCrntPMMCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.84	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMMCSTValue object to 0.
UNS xcvrCrntPMSIZE64Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.85	Unsigned64	read-only	The total number of 64 byte frames received (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZE64TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.86	DateAndTime	read-only	The date and time stamp of the count of 64-byte packets received.
PMV xcvrCrntPMSIZE64Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.87	PMValidity	read-only	Indicates the validity of the provided count of 64-byte packets packets received.
INI xcvrCrntPMSIZE64Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.88	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZE64Value object to 0.
UNS xcvrCrntPMSIZE65To127Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.89	Unsigned64	read-only	The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZE65To127TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.90	DateAndTime	read-only	The date and time stamp of the count of packets between 65 and 127 bytes.
PMV xcvrCrntPMSIZE65To127Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.91	PMValidity	read-only	Indicates the validity of the provided count of packets between 65 and 127 bytes.
INI xcvrCrntPMSIZE65To127Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.92	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZE65To127Value object to 0.
UNS xcvrCrntPMSIZE128To255Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.93	Unsigned64	read-only	The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZE128To255TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.94	DateAndTime	read-only	The date and time stamp of the count of packets between 128 and 255 bytes.
PMV xcvrCrntPMSIZE128To255Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.95	PMValidity	read-only	Indicates the validity of the provided count of packets between 128 and 255 bytes.
INI xcvrCrntPMSIZE128To255Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.96	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZE128To255Value object to 0.
UNS xcvrCrntPMSIZE256To511Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.97	Unsigned64	read-only	The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZE256To511TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.98	DateAndTime	read-only	The date and time stamp of the count of packets between 256 and 511 bytes.
PMV xcvrCrntPMSIZE256To511Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.99	PMValidity	read-only	Indicates the validity of the provided count of packets between 256 and 511 bytes.
INI xcvrCrntPMSIZE256To511Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.100	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZE256To511Value object to 0.
UNS xcvrCrntPMSIZE512To1023Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.101	Unsigned64	read-only	The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZE512To1023TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.102	DateAndTime	read-only	The date and time stamp of the count of packets between 512 and 1023 bytes.
PMV xcvrCrntPMSIZE512To1023Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.103	PMValidity	read-only	Indicates the validity of the provided count of packets between 512 and 1023 bytes.
INI xcvrCrntPMSIZE512To1023Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.104	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZE512To1023Value object to 0.
UNS xcvrCrntPMSIZE1024To1518Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.105	Unsigned64	read-only	The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZE1024To1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.106	DateAndTime	read-only	The date and time stamp of the count of packets between 1024 and 1518 bytes.
PMV xcvrCrntPMSIZE1024To1518Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.107	PMValidity	read-only	Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
INI xcvrCrntPMSIZE1024To1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.108	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZE1024To1518Value object to 0.
UNS xcvrCrntPMSIZEOver1518Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.109	Unsigned64	read-only	The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMSIZEOver1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.110	DateAndTime	read-only	The date and time stamp of the count of packets over 1518 bytes.
PMV xcvrCrntPMSIZEOver1518Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.111	PMValidity	read-only	Indicates the validity of the provided count of packets over 1518 bytes.
INI xcvrCrntPMSIZEOver1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.112	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSIZEOver1518Value object to 0.
U32 xcvrCrntPMFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.113	Unsigned32	read-write	The count of packets that had a valid length but had either a Frame Check Sequence (FCS) or a bad FCS with a non-integral number of octets (Alignment Error) . This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMFCSETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.114	DateAndTime	read-only	The date and time stamp of the count of packets with bad FCS or alignment error.
PMV xcvrCrntPMFCSEValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.115	PMValidity	read-only	Indicates the validity of the provided count of packets with bad FCS or alignment error.
U32 xcvrCrntPMFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.116	Unsigned32	read-write	The total number of dropped frames due to lack of resources or otherwise. Note that this number is not necessarily the number of frames dropped; it is just the number of times that it could be detected. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMFRDRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.117	DateAndTime	read-only	The date and time stamp of the count of dropped packets.
PMV xcvrCrntPMFRDRValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.118	PMValidity	read-only	Indicates the validity of the provided count of dropped packets.
U32 xcvrCrntPMUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.119	Unsigned32	read-write	The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMUSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.120	DateAndTime	read-only	The date and time stamp of the count of undersized packets.
PMV xcvrCrntPMUSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.121	PMValidity	read-only	Indicates the validity of the provided count of undersized packets.
U32 xcvrCrntPMOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.122	Unsigned32	read-write	The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMOSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.123	DateAndTime	read-only	The date and time stamp of the count of oversized packets.
PMV xcvrCrntPMOSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.124	PMValidity	read-only	Indicates the validity of the provided count of oversized packets.
U32 xcvrCrntPMFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.125	Unsigned32	read-write	The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMFRGTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.126	DateAndTime	read-only	The date and time stamp of the count of received packet fragments.
PMV xcvrCrntPMFRGTValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.127	PMValidity	read-only	Indicates the validity of the provided count of received packet fragments.
U32 xcvrCrntPMJABRValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.128	Unsigned32	read-write	The total number of frames received that were longer than 14336 9600 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with non-integral number of octets (Alignment Error). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrCrntPMJABRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.129	DateAndTime	read-only	The date and time stamp of the count of received jabbers.
PMV xcvrCrntPMJABRValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.130	PMValidity	read-only	Indicates the validity of the provided count of received jabbers.
U32 xcvrCrntPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.131	Unsigned32	read-write	The count of OTN digital wrapper layer errored blocks.
DAT xcvrCrntPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.132	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer errored blocks value.
PMV xcvrCrntPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.133	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer errored blocks value.
U32 xcvrCrntPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.134	Unsigned32	read-write	The count of OTN digital wrapper layer background block errors.
DAT xcvrCrntPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.135	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer background block errors.
PMV xcvrCrntPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.136	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer background block errors value.
U32 xcvrCrntPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.137	Unsigned32	read-write	The count of errored seconds at the OTN digital wrapper layer.
DAT xcvrCrntPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.138	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer errored seconds value.
PMV xcvrCrntPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.139	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer errored seconds value.
U32 xcvrCrntPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.140	Unsigned32	read-write	The count of severely errored seconds at the OTN digital wrapper layer.
DAT xcvrCrntPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.141	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer severely errored seconds value.
PMV xcvrCrntPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.142	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer severely errored seconds value.
U32 xcvrCrntPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.143	Unsigned32	read-write	The count of Out-Of-Frame seconds at the OTN digital wrapper layer.
DAT xcvrCrntPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.144	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer Out-Of-Frame seconds value.
PMV xcvrCrntPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.145	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer Out-of-Frame seconds value.
FIX xcvrCrntPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.3.1.146	FixedX10	read-only	A second supply voltage value on the transceiver.
DAT xcvrCrntPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.147	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV xcvrCrntPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.3.1.148	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
INI xcvrCrntPMCVSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.149	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMCVSValue object to 0.
INI xcvrCrntPMESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.150	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMESSValue object to 0.
INI xcvrCrntPMSESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.151	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSESSValue object to 0.
INI xcvrCrntPMSEFSSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.152	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSEFSSValue object to 0.
INI xcvrCrntPMRSEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.153	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMRSEBValue object to 0.
INI xcvrCrntPMRSBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.154	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMRSBBEValue object to 0.
INI xcvrCrntPMRSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.155	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMRSESValue object to 0.
INI xcvrCrntPMRSSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.156	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMRSSESValue object to 0.
INI xcvrCrntPMRSOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.157	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMRSOFSValue object to 0.
INI xcvrCrntPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.158	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMCVValue object to 0.
INI xcvrCrntPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.159	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMESValue object to 0.
INI xcvrCrntPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.160	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMSESValue object to 0.
INI xcvrCrntPMINVBLKInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.161	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMINVBLKValue object to 0.
INI xcvrCrntPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.162	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMNBITCRValue object to 0.
INI xcvrCrntPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.163	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMNBYTCRValue object to 0.
INI xcvrCrntPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.164	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMUNCRCDWValue object to 0.
INI xcvrCrntPMFCSEInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.165	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMFCSEValue object to 0.
INI xcvrCrntPMFRDRInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.166	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMFRDRValue object to 0.
INI xcvrCrntPMUSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.167	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMUSIZEValue object to 0.
INI xcvrCrntPMOSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.168	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOSIZEValue object to 0.
INI xcvrCrntPMFRGTInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.169	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMFRGTValue object to 0.
INI xcvrCrntPMJABRInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.170	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMJABRValue object to 0.
INI xcvrCrntPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.171	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTUEBValue object to 0.
INI xcvrCrntPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.172	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTUBBEValue object to 0.
INI xcvrCrntPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.173	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTUESValue object to 0.
INI xcvrCrntPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.174	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTUSESValue object to 0.
INI xcvrCrntPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.175	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTUOFSValue object to 0.
U32 xcvrCrntPMUASSValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.176	Unsigned32	read-write	The count of unavailable seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrCrntPMUASSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.177	DateAndTime	read-only	The date and time stamp of the section layer unavailable seconds value.
PMV xcvrCrntPMUASSValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.178	PMValidity	read-only	Indicates the validity of the provided section layer unavailable seconds value.
INI xcvrCrntPMUASSInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.179	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMUASSValue object to 0.
U32 xcvrCrntPMRSUASValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.180	Unsigned32	read-write	The count of regenerator section unavailable seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrCrntPMRSUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.181	DateAndTime	read-only	The date and time stamp of the regenerator section unavailable seconds value.
PMV xcvrCrntPMRSUASValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.182	PMValidity	read-only	Indicates the validity of the provided regenerator section unavailable seconds value.
INI xcvrCrntPMRSUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.183	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMRSUASValue object to 0.
U32 xcvrCrntPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.184	Unsigned32	read-write	The count of unavailable seconds. This object applies only to transciever ports provisioned for the gigabit ethernet protocol or a fiber channel protocol.
DAT xcvrCrntPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.185	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV xcvrCrntPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.186	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI xcvrCrntPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.187	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMUASValue object to 0.
U32 xcvrCrntPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.188	Unsigned32	read-write	The count of unavailable seconds at the OTN digital wrapper layer.
DAT xcvrCrntPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.189	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer unavailable seconds value.
PMV xcvrCrntPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.190	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer unavailable seconds value.
INI xcvrCrntPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.191	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTUUASValue object to 0.
STR xcvrCrntPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.192	DisplayString	read-only	The instantaneous BER of transciever ports provisioned for the 10 gigabit ethernet LAN with FEC protocol.
DAT xcvrCrntPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.193	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV xcvrCrntPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.194	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI xcvrCrntPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.195	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTNBERValue object to 0.
STR xcvrCrntPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.196	DisplayString	read-only	The average/interval BER of transciever ports provisioned for the 10 gigabit ethernet LAN with FEC protocol.
DAT xcvrCrntPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.197	DateAndTime	read-only	The date and time stamp of the average/interval BER.
PMV xcvrCrntPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.198	PMValidity	read-only	Indicates the validity of the provided average/interval BER.
INI xcvrCrntPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.199	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOTNAVGBERValue object to 0.
UNS xcvrCrntPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.200	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrCrntPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.201	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV xcvrCrntPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.202	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI xcvrCrntPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.203	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMNBITCR64BitValue object to 0.
UNS xcvrCrntPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.204	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrCrntPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.205	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV xcvrCrntPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.206	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI xcvrCrntPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.207	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMNBYTCR64BitValue object to 0.
FIX xcvrCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.208	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT xcvrCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.209	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV xcvrCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.210	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI xcvrCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.211	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOPRMinValue object to 0.
FIX xcvrCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.212	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT xcvrCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.213	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV xcvrCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.214	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI xcvrCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.215	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOPRMaxValue object to 0.
FIX xcvrCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.216	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT xcvrCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.217	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV xcvrCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.218	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI xcvrCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.219	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOPRAvgValue object to 0.
FIX xcvrCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.220	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT xcvrCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.221	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV xcvrCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.222	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI xcvrCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.223	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOPTMinValue object to 0.
FIX xcvrCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.224	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT xcvrCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.225	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV xcvrCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.226	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI xcvrCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.227	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOPTMaxValue object to 0.
FIX xcvrCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.3.1.228	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT xcvrCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.3.1.229	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV xcvrCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.3.1.230	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI xcvrCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.3.1.231	InitializeCmd	read-write	Used to initialize the value of the xcvrCrntPMOPTAvgValue object to 0.
xcvrHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.4		not-accessible	A table of historical performance monitoring statistics collected for the optical transceiver facilities on the NE.
xcvrHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.4.1		not-accessible	The row entry object of the optical transceiver historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given optical transceiver.
XCV xcvrHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.4.1.1	XcvrType	not-accessible	The type of the optical transceiver targeted for PMs.
INT xcvrHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.4.1.2	INTEGER	not-accessible	The number of the shelf on which the optical transceiver targeted for PMs is provisioned.
INT xcvrHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.4.1.3	INTEGER	not-accessible	The number of the slot within which the optical transceiver targeted for PMs is provisioned.
INT xcvrHistPMIdx	1.3.6.1.4.1.18070.2.2.1.6.4.1.4	INTEGER	not-accessible	The number of the transceiver port targeted for PMs.
NUM xcvrHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.4.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT xcvrHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.4.1.6	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX xcvrHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.7	FixedX10	read-only	The optical power received on the input of the transceiver.
DAT xcvrHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.8	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV xcvrHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.9	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX xcvrHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.10	FixedX10	read-only	The optical power transmitted at the output of the transceiver.
DAT xcvrHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.11	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV xcvrHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.12	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT xcvrHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.13	INTEGER	read-only	The optical transceiver temperature.
DAT xcvrHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.14	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV xcvrHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.15	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX xcvrHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.16	FixedX10	read-only	The transceiver supply voltage.
DAT xcvrHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.17	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV xcvrHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.18	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT xcvrHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.19	INTEGER	read-only	The transceiver laser bias current.
DAT xcvrHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.20	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV xcvrHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.21	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 xcvrHistPMCVSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.22	Unsigned32	read-write	The count of coding violations at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrHistPMCVSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.23	DateAndTime	read-only	The date and time stamp of the section layer coding violations value.
PMV xcvrHistPMCVSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.24	PMValidity	read-only	Indicates the validity of the provided section layer coding violations value.
U32 xcvrHistPMESSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.25	Unsigned32	read-write	The count of errored seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrHistPMESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.26	DateAndTime	read-only	The date and time stamp of the section layer errored seconds value.
PMV xcvrHistPMESSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.27	PMValidity	read-only	Indicates the validity of the provided section layer errored seconds value.
U32 xcvrHistPMSESSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.28	Unsigned32	read-write	The count of severely errored seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrHistPMSESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.29	DateAndTime	read-only	The date and time stamp of the section layer severely errored seconds value.
PMV xcvrHistPMSESSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.30	PMValidity	read-only	Indicates the validity of the provided section layer severely errored seconds value.
U32 xcvrHistPMSEFSSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.31	Unsigned32	read-write	The count of severely errored framing seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrHistPMSEFSSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.32	DateAndTime	read-only	The date and time stamp of the section layer severely errored framing seconds value.
PMV xcvrHistPMSEFSSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.33	PMValidity	read-only	Indicates the validity of the provided section layer severely errored framing seconds value.
U32 xcvrHistPMRSEBValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.34	Unsigned32	read-write	The count of regenerator section errored blocks. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrHistPMRSEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.35	DateAndTime	read-only	The date and time stamp of the regenerator section errored blocks value.
PMV xcvrHistPMRSEBValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.36	PMValidity	read-only	Indicates the validity of the provided regenerator section errored blocks value.
U32 xcvrHistPMRSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.37	Unsigned32	read-write	The count of regenerator section background block errors. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrHistPMRSBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.38	DateAndTime	read-only	The date and time stamp of the regenerator section background block errors value.
PMV xcvrHistPMRSBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.39	PMValidity	read-only	Indicates the validity of the provided regenerator section background block errors value.
U32 xcvrHistPMRSESValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.40	Unsigned32	read-write	The count of regenerator section errored seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrHistPMRSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.41	DateAndTime	read-only	The date and time stamp of the regenerator section errored seconds value.
PMV xcvrHistPMRSESValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.42	PMValidity	read-only	Indicates the validity of the provided regenerator section errored seconds value.
U32 xcvrHistPMRSSESValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.43	Unsigned32	read-write	The count of regenerator section severely errored seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrHistPMRSSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.44	DateAndTime	read-only	The date and time stamp of the regenerator section severely errored seconds value.
PMV xcvrHistPMRSSESValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.45	PMValidity	read-only	Indicates the validity of the provided regenerator section severely errored seconds value.
U32 xcvrHistPMRSOFSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.46	Unsigned32	read-write	The count of regenerator section out-of-frame seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrHistPMRSOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.47	DateAndTime	read-only	The date and time stamp of the regenerator section out-of-frame seconds value.
PMV xcvrHistPMRSOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.48	PMValidity	read-only	Indicates the validity of the provided regenerator section out-of-frame seconds value.
U32 xcvrHistPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.49	Unsigned32	read-write	The count of coding violations. This object applies only to transciever ports provisioned for the gigabit ethernet protocol or a fiber channel protocol.
DAT xcvrHistPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.50	DateAndTime	read-only	The date and time stamp of the coding violations value.
PMV xcvrHistPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.51	PMValidity	read-only	Indicates the validity of the provided coding violations value.
U32 xcvrHistPMESValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.52	Unsigned32	read-write	The count of errored seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
DAT xcvrHistPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.53	DateAndTime	read-only	The date and time stamp of the errored seconds value.
PMV xcvrHistPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.54	PMValidity	read-only	Indicates the validity of the provided errored seconds value.
U32 xcvrHistPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.55	Unsigned32	read-write	The count of severely errored seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
DAT xcvrHistPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.56	DateAndTime	read-only	The date and time stamp of the severely errored seconds value.
PMV xcvrHistPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.57	PMValidity	read-only	Indicates the validity of the provided severely errored seconds value.
U32 xcvrHistPMINVBLKValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.58	Unsigned32	read-write	The count of invalid blocks. This object applies only to transciever ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMINVBLKTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.59	DateAndTime	read-only	The date and time stamp of the invalid blocks value.
PMV xcvrHistPMINVBLKValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.60	PMValidity	read-only	Indicates the validity of the provided invalid blocks value.
U32 xcvrHistPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.61	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrHistPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.62	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV xcvrHistPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.63	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
U32 xcvrHistPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.64	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrHistPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.65	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV xcvrHistPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.66	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
U32 xcvrHistPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.67	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrHistPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.68	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV xcvrHistPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.69	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
UNS xcvrHistPMTBYCRXValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.70	Unsigned64	read-only	The total number of bytes of data (including those in bad frames) received (excluding framing bits but including FCS bytes). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMTBYCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.71	DateAndTime	read-only	The date and time stamp of the received bytes count value.
PMV xcvrHistPMTBYCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.72	PMValidity	read-only	Indicates the validity of the provided received bytes count value.
INI xcvrHistPMTBYCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.73	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMTBYCRXValue object to 0.
UNS xcvrHistPMTFRCRXValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.74	Unsigned64	read-only	The total number of received frames (incl. bad frames, broadcast frames, and multicast frames received). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMTFRCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.75	DateAndTime	read-only	The date and time stamp of the received frames count value.
PMV xcvrHistPMTFRCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.76	PMValidity	read-only	Indicates the validity of the provided received frames count value.
INI xcvrHistPMTFRCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.77	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMTFRCRXValue object to 0.
UNS xcvrHistPMBCSTValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.78	Unsigned64	read-only	The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMBCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.79	DateAndTime	read-only	The date and time stamp of the broadcast packets received count value.
PMV xcvrHistPMBCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.80	PMValidity	read-only	Indicates the validity of the provided broadcast packets received count value.
INI xcvrHistPMBCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.81	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMBCSTValue object to 0.
UNS xcvrHistPMMCSTValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.82	Unsigned64	read-only	The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMMCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.83	DateAndTime	read-only	The date and time stamp of the multicast packets received count value.
PMV xcvrHistPMMCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.84	PMValidity	read-only	Indicates the validity of the provided multicast packets received count value.
INI xcvrHistPMMCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.85	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMMCSTValue object to 0.
UNS xcvrHistPMSIZE64Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.86	Unsigned64	read-only	The total number of 64 byte frames received (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZE64TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.87	DateAndTime	read-only	The date and time stamp of the count of 64-byte packets received.
PMV xcvrHistPMSIZE64Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.88	PMValidity	read-only	Indicates the validity of the provided count of 64-byte packets packets received.
INI xcvrHistPMSIZE64Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.89	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZE64Value object to 0.
UNS xcvrHistPMSIZE65To127Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.90	Unsigned64	read-only	The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZE65To127TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.91	DateAndTime	read-only	The date and time stamp of the count of packets between 65 and 127 bytes.
PMV xcvrHistPMSIZE65To127Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.92	PMValidity	read-only	Indicates the validity of the provided count of packets between 65 and 127 bytes.
INI xcvrHistPMSIZE65To127Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.93	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZE65To127Value object to 0.
UNS xcvrHistPMSIZE128To255Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.94	Unsigned64	read-only	The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZE128To255TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.95	DateAndTime	read-only	The date and time stamp of the count of packets between 128 and 255 bytes.
PMV xcvrHistPMSIZE128To255Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.96	PMValidity	read-only	Indicates the validity of the provided count of packets between 128 and 255 bytes.
INI xcvrHistPMSIZE128To255Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.97	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZE128To255Value object to 0.
UNS xcvrHistPMSIZE256To511Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.98	Unsigned64	read-only	The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZE256To511TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.99	DateAndTime	read-only	The date and time stamp of the count of packets between 256 and 511 bytes.
PMV xcvrHistPMSIZE256To511Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.100	PMValidity	read-only	Indicates the validity of the provided count of packets between 256 and 511 bytes.
INI xcvrHistPMSIZE256To511Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.101	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZE256To511Value object to 0.
UNS xcvrHistPMSIZE512To1023Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.102	Unsigned64	read-only	The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZE512To1023TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.103	DateAndTime	read-only	The date and time stamp of the count of packets between 512 and 1023 bytes.
PMV xcvrHistPMSIZE512To1023Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.104	PMValidity	read-only	Indicates the validity of the provided count of packets between 512 and 1023 bytes.
INI xcvrHistPMSIZE512To1023Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.105	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZE512To1023Value object to 0.
UNS xcvrHistPMSIZE1024To1518Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.106	Unsigned64	read-only	The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZE1024To1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.107	DateAndTime	read-only	The date and time stamp of the count of packets between 1024 and 1518 bytes.
PMV xcvrHistPMSIZE1024To1518Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.108	PMValidity	read-only	Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
INI xcvrHistPMSIZE1024To1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.109	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZE1024To1518Value object to 0.
UNS xcvrHistPMSIZEOver1518Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.110	Unsigned64	read-only	The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMSIZEOver1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.111	DateAndTime	read-only	The date and time stamp of the count of packets over 1518 bytes.
PMV xcvrHistPMSIZEOver1518Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.112	PMValidity	read-only	Indicates the validity of the provided count of packets over 1518 bytes.
INI xcvrHistPMSIZEOver1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.113	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSIZEOver1518Value object to 0.
U32 xcvrHistPMFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.114	Unsigned32	read-write	The count of packets that had a valid length but had either a Frame Check Sequence (FCS) or a bad FCS with a non-integral number of octets (Alignment Error) . This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMFCSETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.115	DateAndTime	read-only	The date and time stamp of the count of packets with bad FCS or alignment error.
PMV xcvrHistPMFCSEValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.116	PMValidity	read-only	Indicates the validity of the provided count of packets with bad FCS or alignment error.
U32 xcvrHistPMFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.117	Unsigned32	read-write	The total number of dropped frames due to lack of resources or otherwise. Note that this number is not necessarily the number of frames dropped; it is just the number of times that it could be detected. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMFRDRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.118	DateAndTime	read-only	The date and time stamp of the count of dropped packets.
PMV xcvrHistPMFRDRValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.119	PMValidity	read-only	Indicates the validity of the provided count of dropped packets.
U32 xcvrHistPMUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.120	Unsigned32	read-write	The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMUSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.121	DateAndTime	read-only	The date and time stamp of the count of undersized packets.
PMV xcvrHistPMUSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.122	PMValidity	read-only	Indicates the validity of the provided count of undersized packets.
U32 xcvrHistPMOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.123	Unsigned32	read-write	The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMOSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.124	DateAndTime	read-only	The date and time stamp of the count of oversized packets.
PMV xcvrHistPMOSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.125	PMValidity	read-only	Indicates the validity of the provided count of oversized packets.
U32 xcvrHistPMFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.126	Unsigned32	read-write	The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMFRGTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.127	DateAndTime	read-only	The date and time stamp of the count of received packet fragments.
PMV xcvrHistPMFRGTValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.128	PMValidity	read-only	Indicates the validity of the provided count of received packet fragments.
U32 xcvrHistPMJABRValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.129	Unsigned32	read-write	The total number of frames received that were longer than 14336 9600 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with non-integral number of octets (Alignment Error). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
DAT xcvrHistPMJABRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.130	DateAndTime	read-only	The date and time stamp of the count of received jabbers.
PMV xcvrHistPMJABRValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.131	PMValidity	read-only	Indicates the validity of the provided count of received jabbers.
U32 xcvrHistPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.132	Unsigned32	read-write	The count of OTN digital wrapper layer errored blocks.
DAT xcvrHistPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.133	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer errored blocks value.
PMV xcvrHistPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.134	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer errored blocks value.
U32 xcvrHistPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.135	Unsigned32	read-write	The count of OTN digital wrapper layer background block errors.
DAT xcvrHistPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.136	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer background block errors.
PMV xcvrHistPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.137	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer background block errors value.
U32 xcvrHistPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.138	Unsigned32	read-write	The count of errored seconds at the OTN digital wrapper layer.
DAT xcvrHistPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.139	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer errored seconds value.
PMV xcvrHistPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.140	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer errored seconds value.
U32 xcvrHistPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.141	Unsigned32	read-write	The count of severely errored seconds at the OTN digital wrapper layer.
DAT xcvrHistPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.142	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer severely errored seconds value.
PMV xcvrHistPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.143	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer severely errored seconds value.
U32 xcvrHistPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.144	Unsigned32	read-write	The count of Out-Of-Frame seconds at the OTN digital wrapper layer.
DAT xcvrHistPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.145	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer Out-Of-Frame seconds value.
PMV xcvrHistPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.146	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer Out-of-Frame seconds value.
FIX xcvrHistPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.4.1.147	FixedX10	read-only	A second supply voltage value on the transceiver.
DAT xcvrHistPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.148	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV xcvrHistPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.4.1.149	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
INI xcvrHistPMCVSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.150	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMCVSValue object to 0.
INI xcvrHistPMESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.151	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMESSValue object to 0.
INI xcvrHistPMSESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.152	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSESSValue object to 0.
INI xcvrHistPMSEFSSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.153	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSEFSSValue object to 0.
INI xcvrHistPMRSEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.154	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMRSEBValue object to 0.
INI xcvrHistPMRSBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.155	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMRSBBEValue object to 0.
INI xcvrHistPMRSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.156	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMRSESValue object to 0.
INI xcvrHistPMRSSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.157	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMRSSESValue object to 0.
INI xcvrHistPMRSOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.158	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMRSOFSValue object to 0.
INI xcvrHistPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.159	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMCVValue object to 0.
INI xcvrHistPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.160	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMESValue object to 0.
INI xcvrHistPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.161	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMSESValue object to 0.
INI xcvrHistPMINVBLKInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.162	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMINVBLKValue object to 0.
INI xcvrHistPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.163	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMNBITCRValue object to 0.
INI xcvrHistPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.164	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMNBYTCRValue object to 0.
INI xcvrHistPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.165	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMUNCRCDWValue object to 0.
INI xcvrHistPMFCSEInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.166	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMFCSEValue object to 0.
INI xcvrHistPMFRDRInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.167	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMFRDRValue object to 0.
INI xcvrHistPMUSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.168	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMUSIZEValue object to 0.
INI xcvrHistPMOSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.169	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOSIZEValue object to 0.
INI xcvrHistPMFRGTInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.170	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMFRGTValue object to 0.
INI xcvrHistPMJABRInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.171	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMJABRValue object to 0.
INI xcvrHistPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.172	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTUEBValue object to 0.
INI xcvrHistPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.173	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTUBBEValue object to 0.
INI xcvrHistPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.174	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTUESValue object to 0.
INI xcvrHistPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.175	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTUSESValue object to 0.
INI xcvrHistPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.176	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTUOFSValue object to 0.
U32 xcvrHistPMUASSValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.177	Unsigned32	read-write	The count of unavailable seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
DAT xcvrHistPMUASSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.178	DateAndTime	read-only	The date and time stamp of the section layer unavailable seconds value.
PMV xcvrHistPMUASSValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.179	PMValidity	read-only	Indicates the validity of the provided section layer unavailable seconds value.
INI xcvrHistPMUASSInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.180	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMUASSValue object to 0.
U32 xcvrHistPMRSUASValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.181	Unsigned32	read-write	The count of regenerator section unavailable seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
DAT xcvrHistPMRSUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.182	DateAndTime	read-only	The date and time stamp of the regenerator section unavailable seconds value.
PMV xcvrHistPMRSUASValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.183	PMValidity	read-only	Indicates the validity of the provided regenerator section unavailable seconds value.
INI xcvrHistPMRSUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.184	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMRSUASValue object to 0.
U32 xcvrHistPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.185	Unsigned32	read-write	The count of unavailable seconds. This object applies only to transciever ports provisioned for the gigabit ethernet protocol or a fiber channel protocol.
DAT xcvrHistPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.186	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV xcvrHistPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.187	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI xcvrHistPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.188	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMUASValue object to 0.
U32 xcvrHistPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.189	Unsigned32	read-write	The count of unavailable seconds at the OTN digital wrapper layer.
DAT xcvrHistPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.190	DateAndTime	read-only	The date and time stamp of the OTN digital wrapper layer unavailable seconds value.
PMV xcvrHistPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.191	PMValidity	read-only	Indicates the validity of the provided OTN digital wrapper layer unavailable seconds value.
INI xcvrHistPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.192	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTUUASValue object to 0.
STR xcvrHistPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.193	DisplayString	read-only	The instantaneous BER of transciever ports provisioned for the 10 gigabit ethernet LAN with FEC protocol.
DAT xcvrHistPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.194	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV xcvrHistPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.195	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI xcvrHistPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.196	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTNBERValue object to 0.
STR xcvrHistPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.197	DisplayString	read-only	The interval/average BER of transciever ports provisioned for the 10 gigabit ethernet LAN with FEC protocol.
DAT xcvrHistPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.198	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV xcvrHistPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.199	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI xcvrHistPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.200	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOTNAVGBERValue object to 0.
UNS xcvrHistPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.201	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrHistPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.202	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV xcvrHistPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.203	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI xcvrHistPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.204	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMNBITCR64BitValue object to 0.
UNS xcvrHistPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.205	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to transciever ports provisioned for a protocol that includes Forward Error Correction (FEC).
DAT xcvrHistPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.206	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV xcvrHistPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.207	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
INI xcvrHistPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.208	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMNBYTCR64BitValue object to 0.
FIX xcvrHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.209	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT xcvrHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.210	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV xcvrHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.211	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI xcvrHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.212	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOPRMinValue object to 0.
FIX xcvrHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.213	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT xcvrHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.214	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV xcvrHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.215	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI xcvrHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.216	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOPRMaxValue object to 0.
FIX xcvrHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.217	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT xcvrHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.218	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV xcvrHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.219	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI xcvrHistPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.220	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOPRAvgValue object to 0.
FIX xcvrHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.221	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT xcvrHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.222	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV xcvrHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.223	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI xcvrHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.224	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOPTMinValue object to 0.
FIX xcvrHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.225	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT xcvrHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.226	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV xcvrHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.227	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI xcvrHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.228	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOPTMaxValue object to 0.
FIX xcvrHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.4.1.229	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT xcvrHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.4.1.230	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV xcvrHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.4.1.231	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI xcvrHistPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.4.1.232	InitializeCmd	read-write	Used to initialize the value of the xcvrHistPMOPTAvgValue object to 0.
xcvrPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.5		not-accessible	A table of threshold levels for performance monitoring counter values on optical transceiver facilities, that are used in the generation of threshold crossing alerts.
xcvrPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.5.1		not-accessible	The row entry object of the optical transceiver performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual optical transceiver.
XCV xcvrPMThresholdTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.5.1.1	XcvrType	not-accessible	The type of the optical transceiver targeted for PM thresholds.
INT xcvrPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.5.1.2	INTEGER	not-accessible	The shelf number on which the optical transceiver targeted for PM thresholds is provisioned.
INT xcvrPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.5.1.3	INTEGER	not-accessible	The slot number on which the optical transceiver targeted for PM thresholds is provisioned.
INT xcvrPMThresholdIdx	1.3.6.1.4.1.18070.2.2.1.6.5.1.4	INTEGER	not-accessible	The optical transceiver port number on the circuit pack that is targeted for PM thresholds.
NUM xcvrPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.5.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 xcvrPMThresholdCVSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.6	Unsigned32	read-write	The threshold for the count of coding violations at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
U32 xcvrPMThresholdESSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.7	Unsigned32	read-write	The threshold for the count of errored seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
U32 xcvrPMThresholdSESSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.8	Unsigned32	read-write	The threshold fro the count of severely errored seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
U32 xcvrPMThresholdSEFSSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.9	Unsigned32	read-write	The threshold for the count of severely errored framing seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
U32 xcvrPMThresholdRSEBValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.10	Unsigned32	read-write	The threshold for the count of regenerator section errored blocks. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
U32 xcvrPMThresholdRSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.11	Unsigned32	read-write	The threshold for the count of regenerator section background block errors. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
U32 xcvrPMThresholdRSESValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.12	Unsigned32	read-write	The threshold for the count of regenerator section errored seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
U32 xcvrPMThresholdRSSESValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.13	Unsigned32	read-write	The threshold for the count of regenerator section severely errored seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
U32 xcvrPMThresholdRSOFSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.14	Unsigned32	read-write	The threshold for the count of regenerator section out-of-frame seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
U32 xcvrPMThresholdCVValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.15	Unsigned32	read-write	The threshold for the count of coding violations. This object applies only to transciever ports provisioned for the gigabit ethernet protocol or a fiber channel protocol.
U32 xcvrPMThresholdESValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.16	Unsigned32	read-write	The threshold for the count of errored seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
U32 xcvrPMThresholdSESValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.17	Unsigned32	read-write	The threshold for the count of severely errored seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
U32 xcvrPMThresholdINVBLKValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.18	Unsigned32	read-write	The threshold for the count of invalid blocks. This object applies only to transciever ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.21	Unsigned32	read-write	The threshold for the count of uncorrectable codewords. This object applies only to transciever ports provisioned for the 10 gigabit ethernet LAN with FEC protocol.
U32 xcvrPMThresholdFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.22	Unsigned32	read-write	The threshold for the count of FCSE packets. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.23	Unsigned32	read-write	The threshold for the count of dropped frames. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.24	Unsigned32	read-write	The threshold for the count of undersized frames. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.25	Unsigned32	read-write	The threshold for the count of oversized frames. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.26	Unsigned32	read-write	The threshold for the count of frame fragments. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdJABRValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.27	Unsigned32	read-write	The threshold for the count of jabbers. This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
U32 xcvrPMThresholdOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.28	Unsigned32	read-write	The threshold for the count of errored blocks at the OTN digital wrapper layer.
U32 xcvrPMThresholdOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.29	Unsigned32	read-write	The threshold for the count of background block errors at the OTN digital wrapper layer.
U32 xcvrPMThresholdOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.30	Unsigned32	read-write	The threshold for the count of errored seconds at the OTN digital wrapper layer.
U32 xcvrPMThresholdOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.31	Unsigned32	read-write	The threshold for the count of severely errored seconds at the OTN digital wrapper layer.
U32 xcvrPMThresholdOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.32	Unsigned32	read-write	The threshold for the count of Out-of-Frame seconds at the OTN digital wrapper layer.
U32 xcvrPMThresholdUASSValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.33	Unsigned32	read-write	The threshold for the count of unavailable seconds at the section layer. This object applies only to transciever ports provisioned for a SONET OC-N protocol.
U32 xcvrPMThresholdRSUASValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.34	Unsigned32	read-write	The threshold for the count of regenerator section unavailable seconds. This object applies only to transciever ports provisioned for a SDH STM-N protocol.
U32 xcvrPMThresholdUASValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.35	Unsigned32	read-write	The threshold for the count of unavailable seconds. This object applies only to transciever ports provisioned for an ethernet protocol or a fiber channel protocol.
U32 xcvrPMThresholdOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.5.1.36	Unsigned32	read-write	The threshold for the count of unavailable seconds at the OTN digital wrapper layer.
amdCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.6		not-accessible	A table of current performance monitoring statistics collected for the ports of active multiplexer-demultiplexer circuit packs.
amdCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.6.1		not-accessible	The row entry object of the active multiplexer-demultiplexer current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given AMD port.
AMD amdCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.6.1.1	AmdType	not-accessible	The specific type of active multiplexer-demultiplexer circuit pack on which the facility targeted for PMs is provisioned.
INT amdCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.6.1.2	INTEGER	not-accessible	The number of the shelf on which the active multiplexer-demultiplexer facility targeted for PMs is provisioned.
INT amdCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.6.1.3	INTEGER	not-accessible	The number of the slot within which the active multiplexer-demultiplexer facility targeted for PMs is provisioned.
INT amdCrntPMLineIdx	1.3.6.1.4.1.18070.2.2.1.6.6.1.4	INTEGER	not-accessible	The number of the multiplexed wavelength line on the AMD circuit pack that is targeted for PMs.
AMD amdCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.6.1.5	AmdPortType	not-accessible	Identifies a specific port on the identified line of the AMD circuit pack that is targeted for PMs.
NUM amdCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.6.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX amdCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.6.1.7	FixedX10	read-only	The optical power received on the input of the AMD port.
DAT amdCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.6.1.8	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV amdCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.6.1.9	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX amdCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.6.1.10	FixedX10	read-only	The optical power transmitted at the output of the AMD port.
DAT amdCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.6.1.11	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV amdCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.6.1.12	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
FIX amdCrntPMVOAValue	1.3.6.1.4.1.18070.2.2.1.6.6.1.13	FixedX10	read-only	The variable optical attenuation of the AMD port.
DAT amdCrntPMVOATimeStamp	1.3.6.1.4.1.18070.2.2.1.6.6.1.14	DateAndTime	read-only	The date and time stamp of the variable optical attenuation value.
PMV amdCrntPMVOAValidity	1.3.6.1.4.1.18070.2.2.1.6.6.1.15	PMValidity	read-only	Indicates the validity of the provided variable optical attenuation value.
INT amdCrntPMLitChnValue	1.3.6.1.4.1.18070.2.2.1.6.6.1.16	INTEGER	read-only	The number of muxed channels with light on the line port.
DAT amdCrntPMLitChnTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.6.1.17	DateAndTime	read-only	The date and time stamp of the number of lit channels value.
PMV amdCrntPMLitChnValidity	1.3.6.1.4.1.18070.2.2.1.6.6.1.18	PMValidity	read-only	Indicates the validity of the provided number of lit channels value.
amdHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.7		not-accessible	A table of historical performance monitoring statistics collected for the ports of active multiplexer-demultiplexer circuit packs.
amdHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.7.1		not-accessible	The row entry object of the active multiplexer-demultiplexer historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given AMD port.
AMD amdHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.1	AmdType	not-accessible	The specific type of active multiplexer-demultiplexer circuit pack on which the facility targeted for PMs is provisioned.
INT amdHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.2	INTEGER	not-accessible	The number of the shelf on which the active multiplexer-demultiplexer facility targeted for PMs is provisioned.
INT amdHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.3	INTEGER	not-accessible	The number of the slot within which the active multiplexer-demultiplexer facility targeted for PMs is provisioned.
INT amdHistPMLineIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.4	INTEGER	not-accessible	The number of the multiplexed wavelength line on the AMD circuit pack that is targeted for PMs.
AMD amdHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.5	AmdPortType	not-accessible	Identifies a specific port on the identified line of the AMD circuit pack that is targeted for PMs.
NUM amdHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT amdHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.7.1.7	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX amdHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.7.1.8	FixedX10	read-only	The optical power received on the input of the AMD port.
DAT amdHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.7.1.9	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV amdHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.7.1.10	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX amdHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.7.1.11	FixedX10	read-only	The optical power transmitted at the output of the AMD port.
DAT amdHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.7.1.12	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV amdHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.7.1.13	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
FIX amdHistPMVOAValue	1.3.6.1.4.1.18070.2.2.1.6.7.1.14	FixedX10	read-only	The variable optical attenuation of the AMD port.
DAT amdHistPMVOATimeStamp	1.3.6.1.4.1.18070.2.2.1.6.7.1.15	DateAndTime	read-only	The date and time stamp of the variable optical attenuation value.
PMV amdHistPMVOAValidity	1.3.6.1.4.1.18070.2.2.1.6.7.1.16	PMValidity	read-only	Indicates the validity of the provided variable optical attenuation valcue.
INT amdHistPMLitChnValue	1.3.6.1.4.1.18070.2.2.1.6.7.1.17	INTEGER	read-only	The number of muxed channels with light on the line port.
DAT amdHistPMLitChnTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.7.1.18	DateAndTime	read-only	The date and time stamp of the number of lit channels value.
PMV amdHistPMLitChnValidity	1.3.6.1.4.1.18070.2.2.1.6.7.1.19	PMValidity	read-only	Indicates the validity of the provided number of lit channels value.
ocnCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.8		not-accessible	A table of current performance monitoring statistics collected for the SONET OC-N facilities on the NE.
ocnCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.8.1		not-accessible	The row entry object of the SONET OC-N current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given OC-N facility.
OCN ocnCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.8.1.1	OcnType	not-accessible	The type of OC-N facility targeted for PMs.
INT ocnCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.8.1.2	INTEGER	not-accessible	The number of the shelf on which the OC-N facility targeted for PMs is provisioned.
INT ocnCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.8.1.3	INTEGER	not-accessible	The number of the slot within which the OC-N facility targeted for PMs is provisioned.
INT ocnCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.8.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the OC-N facility targeted for PMs is provisioned.
NUM ocnCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.8.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX ocnCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.6	FixedX10	read-only	The optical power received on the input of the OC-N facility port.
DAT ocnCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV ocnCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX ocnCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.9	FixedX10	read-only	The optical power transmitted at the output of the OC-N facility port.
DAT ocnCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV ocnCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT ocnCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.12	INTEGER	read-only	The temperature measured on the OC-N facility port.
DAT ocnCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV ocnCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX ocnCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.15	FixedX10	read-only	The supply voltage measured on the OC-N facility port.
DAT ocnCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV ocnCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT ocnCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.18	INTEGER	read-only	The laser bias current measured on the OC-N facility port.
DAT ocnCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.19	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV ocnCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.20	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 ocnCrntPMCVSValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.21	Unsigned32	read-write	The count of coding violations at the section layer.
DAT ocnCrntPMCVSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.22	DateAndTime	read-only	The date and time stamp of the section layer coding violations value.
PMV ocnCrntPMCVSValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.23	PMValidity	read-only	Indicates the validity of the provided section layer coding violations value.
U32 ocnCrntPMESSValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.24	Unsigned32	read-write	The count of errored seconds at the section layer.
DAT ocnCrntPMESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.25	DateAndTime	read-only	The date and time stamp of the section layer errored seconds value.
PMV ocnCrntPMESSValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.26	PMValidity	read-only	Indicates the validity of the provided section layer errored seconds value.
U32 ocnCrntPMSESSValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.27	Unsigned32	read-write	The count of severely errored seconds at the section layer.
DAT ocnCrntPMSESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.28	DateAndTime	read-only	The date and time stamp of the section layer severely errored seconds value.
PMV ocnCrntPMSESSValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.29	PMValidity	read-only	Indicates the validity of the provided section layer severely errored seconds value.
U32 ocnCrntPMSEFSSValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.30	Unsigned32	read-write	The count of severely errored framing seconds at the section layer.
DAT ocnCrntPMSEFSSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.31	DateAndTime	read-only	The date and time stamp of the section layer severely errored framing seconds value.
PMV ocnCrntPMSEFSSValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.32	PMValidity	read-only	Indicates the validity of the provided section layer severely errored framing seconds value.
FIX ocnCrntPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.8.1.33	FixedX10	read-only	The value of the second supply voltage source measured on the OC-N facility port transceiver.
DAT ocnCrntPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.34	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV ocnCrntPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.8.1.35	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
U32 ocnCrntPMCVLValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.36	Unsigned32	read-write	The count of coding violations at the line layer.
DAT ocnCrntPMCVLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.37	DateAndTime	read-only	The date and time stamp of the line layer coding violations value.
PMV ocnCrntPMCVLValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.38	PMValidity	read-only	Indicates the validity of the provided line layer coding violations value.
U32 ocnCrntPMESLValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.39	Unsigned32	read-write	The count of errored seconds at the line layer.
DAT ocnCrntPMESLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.40	DateAndTime	read-only	The date and time stamp of the line layer errored seconds value.
PMV ocnCrntPMESLValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.41	PMValidity	read-only	Indicates the validity of the provided line layer errored seconds value.
U32 ocnCrntPMSESLValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.42	Unsigned32	read-write	The count of severely errored seconds at the line layer.
DAT ocnCrntPMSESLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.43	DateAndTime	read-only	The date and time stamp of the line layer severely errored seconds value.
PMV ocnCrntPMSESLValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.44	PMValidity	read-only	Indicates the validity of the provided line layer severely errored seconds value.
U32 ocnCrntPMUASLValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.45	Unsigned32	read-write	The count of unavailable seconds at the line layer.
DAT ocnCrntPMUASLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.46	DateAndTime	read-only	The date and time stamp of the line layer unavailable seconds value.
PMV ocnCrntPMUASLValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.47	PMValidity	read-only	Indicates the validity of the provided line layer unavailable seconds value.
U32 ocnCrntPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.48	Unsigned32	read-write	The count of OTU digital wrapper layer errored blocks.
DAT ocnCrntPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.49	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored blocks value.
PMV ocnCrntPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.50	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored blocks value.
U32 ocnCrntPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.51	Unsigned32	read-write	The count of OTU digital wrapper layer background block errors.
DAT ocnCrntPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.52	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer background block errors value.
PMV ocnCrntPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.53	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer background block errors value.
U32 ocnCrntPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.54	Unsigned32	read-write	The count of OTU digital wrapper layer errored seconds.
DAT ocnCrntPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.55	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored seconds value.
PMV ocnCrntPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.56	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored seconds value.
U32 ocnCrntPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.57	Unsigned32	read-write	The count of OTU digital wrapper layer severely errored seconds.
DAT ocnCrntPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.58	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer severely errored seconds value.
PMV ocnCrntPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.59	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored seconds value.
U32 ocnCrntPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.60	Unsigned32	read-write	The count of OTU digital wrapper layer out-of-frame seconds.
DAT ocnCrntPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.61	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer out-of-frame seconds value.
PMV ocnCrntPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.62	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer out-of-frame seconds value.
U32 ocnCrntPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.63	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.64	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV ocnCrntPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.65	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
U32 ocnCrntPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.66	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.67	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV ocnCrntPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.68	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
U32 ocnCrntPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.69	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.70	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV ocnCrntPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.71	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
INI ocnCrntPMCVSInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.72	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMCVSValue object to 0.
INI ocnCrntPMESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.73	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMESSValue object to 0.
INI ocnCrntPMSESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.74	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMSESSValue object to 0.
INI ocnCrntPMSEFSSInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.75	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMSEFSSValue object to 0.
INI ocnCrntPMCVLInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.76	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMCVLValue object to 0.
INI ocnCrntPMESLInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.77	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMESLValue object to 0.
INI ocnCrntPMSESLInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.78	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMSESLValue object to 0.
INI ocnCrntPMUASLInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.79	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMUASLValue object to 0.
INI ocnCrntPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.80	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTUEBValue object to 0.
INI ocnCrntPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.81	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTUBBEValue object to 0.
INI ocnCrntPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.82	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTUESValue object to 0.
INI ocnCrntPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.83	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTUSESValue object to 0.
INI ocnCrntPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.84	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTUOFSValue object to 0.
INI ocnCrntPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.85	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMNBITCRValue object to 0.
INI ocnCrntPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.86	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMNBYTCRValue object to 0.
INI ocnCrntPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.87	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMUNCRCDWValue object to 0.
STR ocnCrntPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.88	DisplayString	read-only	The instantaneous BER of OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.89	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV ocnCrntPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.90	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI ocnCrntPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.91	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTNBERValue object to 0.
STR ocnCrntPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.92	DisplayString	read-only	The interval/average BER of OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.93	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV ocnCrntPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.94	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI ocnCrntPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.95	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTNAVGBERValue object to 0.
UNS ocnCrntPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.96	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.97	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV ocnCrntPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.98	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI ocnCrntPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.99	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMNBITCR64BitValue object to 0.
UNS ocnCrntPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.100	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.101	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV ocnCrntPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.102	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI ocnCrntPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.103	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMNBYTCR64BitValue object to 0.
U32 ocnCrntPMUASSValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.104	Unsigned32	read-write	The count of unavailable seconds at the section layer. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnCrntPMUASSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.105	DateAndTime	read-only	The date and time stamp of the unavailable seconds at the section layer
PMV ocnCrntPMUASSValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.106	PMValidity	read-only	Indicates the validity of the unavailable seconds at the section layer.
INI ocnCrntPMUASSInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.107	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMUASSValue object to 0.
U32 ocnCrntPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.108	Unsigned32	read-write	The count of OTU digital wrapper layer unavailable seconds.
DAT ocnCrntPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.109	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer unavailable seconds value.
PMV ocnCrntPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.110	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer unavailable seconds value.
INI ocnCrntPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.111	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOTUUASValue object to 0.
FIX ocnCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.112	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT ocnCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.113	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV ocnCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.114	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI ocnCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.115	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOPRMinValue object to 0.
FIX ocnCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.116	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT ocnCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.117	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV ocnCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.118	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI ocnCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.119	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOPRMaxValue object to 0.
FIX ocnCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.120	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT ocnCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.121	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV ocnCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.122	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI ocnCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.123	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOPRAvgValue object to 0.
FIX ocnCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.124	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT ocnCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.125	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV ocnCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.126	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI ocnCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.127	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOPTMinValue object to 0.
FIX ocnCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.128	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT ocnCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.129	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV ocnCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.130	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI ocnCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.131	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOPTMaxValue object to 0.
FIX ocnCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.8.1.132	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT ocnCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.8.1.133	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV ocnCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.8.1.134	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI ocnCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.8.1.135	InitializeCmd	read-write	Used to initialize the value of the ocnCrntPMOPTAvgValue object to 0.
ocnHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.9		not-accessible	A table of historical performance monitoring statistics collected for the SONET OC-N facilities on the NE.
ocnHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.9.1		not-accessible	The row entry object of the SONET OC-N historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given OC-N facility.
OCN ocnHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.9.1.1	OcnType	not-accessible	The type of the OC-N facility targeted for PMs.
INT ocnHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.9.1.2	INTEGER	not-accessible	The number of the shelf on which the OC-N facility targeted for PMs is provisioned.
INT ocnHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.9.1.3	INTEGER	not-accessible	The number of the slot within which the OC-N facility targeted for PMs is provisioned.
INT ocnHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.9.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the OC-N facility targeted for PMs is provisioned.
NUM ocnHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.9.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT ocnHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.9.1.6	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX ocnHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.7	FixedX10	read-only	The optical power received on the input of the OC-N facility.
DAT ocnHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.8	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV ocnHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.9	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX ocnHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.10	FixedX10	read-only	The optical power transmitted at the output of the OC-N facility.
DAT ocnHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.11	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV ocnHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.12	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT ocnHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.13	INTEGER	read-only	The temperature measured on the OC-N facility port.
DAT ocnHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.14	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV ocnHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.15	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX ocnHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.16	FixedX10	read-only	The supply voltage measured on the OC-N facility port.
DAT ocnHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.17	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV ocnHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.18	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT ocnHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.19	INTEGER	read-only	The laser bias current measured on the OC-N facility port.
DAT ocnHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.20	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV ocnHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.21	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 ocnHistPMCVSValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.22	Unsigned32	read-write	The count of coding violations at the section layer.
DAT ocnHistPMCVSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.23	DateAndTime	read-only	The date and time stamp of the section layer coding violations value.
PMV ocnHistPMCVSValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.24	PMValidity	read-only	Indicates the validity of the provided section layer coding violations value.
U32 ocnHistPMESSValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.25	Unsigned32	read-write	The count of errored seconds at the section layer.
DAT ocnHistPMESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.26	DateAndTime	read-only	The date and time stamp of the section layer errored seconds value.
PMV ocnHistPMESSValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.27	PMValidity	read-only	Indicates the validity of the provided section layer errored seconds value.
U32 ocnHistPMSESSValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.28	Unsigned32	read-write	The count of severely errored seconds at the section layer.
DAT ocnHistPMSESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.29	DateAndTime	read-only	The date and time stamp of the section layer severely errored seconds value.
PMV ocnHistPMSESSValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.30	PMValidity	read-only	Indicates the validity of the provided section layer severely errored seconds value.
U32 ocnHistPMSEFSSValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.31	Unsigned32	read-write	The count of severely errored framing seconds at the section layer.
DAT ocnHistPMSEFSSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.32	DateAndTime	read-only	The date and time stamp of the section layer severely errored framing seconds value.
PMV ocnHistPMSEFSSValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.33	PMValidity	read-only	Indicates the validity of the provided section layer severely errored framing seconds value.
FIX ocnHistPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.9.1.34	FixedX10	read-only	The value of the second supply voltage source measured on the OC-N facility port transceiver.
DAT ocnHistPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.35	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV ocnHistPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.9.1.36	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
U32 ocnHistPMCVLValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.37	Unsigned32	read-write	The count of coding violations at the line layer.
DAT ocnHistPMCVLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.38	DateAndTime	read-only	The date and time stamp of the line layer coding violations value.
PMV ocnHistPMCVLValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.39	PMValidity	read-only	Indicates the validity of the provided line layer coding violations value.
U32 ocnHistPMESLValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.40	Unsigned32	read-write	The count of errored seconds at the line layer.
DAT ocnHistPMESLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.41	DateAndTime	read-only	The date and time stamp of the line layer errored seconds value.
PMV ocnHistPMESLValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.42	PMValidity	read-only	Indicates the validity of the provided line layer errored seconds value.
U32 ocnHistPMSESLValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.43	Unsigned32	read-write	The count of severely errored seconds at the line layer.
DAT ocnHistPMSESLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.44	DateAndTime	read-only	The date and time stamp of the line layer severely errored seconds value.
PMV ocnHistPMSESLValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.45	PMValidity	read-only	Indicates the validity of the provided line layer severely errored seconds value.
U32 ocnHistPMUASLValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.46	Unsigned32	read-write	The count of unavailable seconds at the line layer.
DAT ocnHistPMUASLTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.47	DateAndTime	read-only	The date and time stamp of the line layer unavailable seconds value.
PMV ocnHistPMUASLValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.48	PMValidity	read-only	Indicates the validity of the provided line layer unavailable seconds value.
U32 ocnHistPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.49	Unsigned32	read-write	The count of OTU digital wrapper layer errored blocks.
DAT ocnHistPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.50	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored blocks value.
PMV ocnHistPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.51	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored blocks value.
U32 ocnHistPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.52	Unsigned32	read-write	The count of OTU digital wrapper layer background block errors.
DAT ocnHistPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.53	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer background block errors value.
PMV ocnHistPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.54	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer background block errors value.
U32 ocnHistPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.55	Unsigned32	read-write	The count of OTU digital wrapper layer errored seconds.
DAT ocnHistPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.56	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored seconds value.
PMV ocnHistPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.57	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored seconds value.
U32 ocnHistPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.58	Unsigned32	read-write	The count of OTU digital wrapper layer severely errored seconds.
DAT ocnHistPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.59	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer severely errored seconds value.
PMV ocnHistPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.60	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored seconds value.
U32 ocnHistPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.61	Unsigned32	read-write	The count of OTU digital wrapper layer out-of-frame seconds.
DAT ocnHistPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.62	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer out-of-frame seconds value.
PMV ocnHistPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.63	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer out-of-frame seconds value.
U32 ocnHistPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.64	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.65	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV ocnHistPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.66	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
U32 ocnHistPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.67	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.68	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV ocnHistPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.69	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
U32 ocnHistPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.70	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.71	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV ocnHistPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.72	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
INI ocnHistPMCVSInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.73	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMCVSValue object to 0.
INI ocnHistPMESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.74	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMESSValue object to 0.
INI ocnHistPMSESSInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.75	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMSESSValue object to 0.
INI ocnHistPMSEFSSInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.76	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMSEFSSValue object to 0.
INI ocnHistPMCVLInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.77	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMCVLValue object to 0.
INI ocnHistPMESLInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.78	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMESLValue object to 0.
INI ocnHistPMSESLInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.79	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMSESLValue object to 0.
INI ocnHistPMUASLInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.80	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMUASLValue object to 0.
INI ocnHistPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.81	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTUEBValue object to 0.
INI ocnHistPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.82	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTUBBEValue object to 0.
INI ocnHistPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.83	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTUESValue object to 0.
INI ocnHistPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.84	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTUSESValue object to 0.
INI ocnHistPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.85	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTUOFSValue object to 0.
INI ocnHistPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.86	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMNBITCRValue object to 0.
INI ocnHistPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.87	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMNBYTCRValue object to 0.
INI ocnHistPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.88	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMUNCRCDWValue object to 0.
STR ocnHistPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.89	DisplayString	read-only	The instantaneous BER of OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.90	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV ocnHistPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.91	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI ocnHistPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.92	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTNBERValue object to 0.
STR ocnHistPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.93	DisplayString	read-only	The interval/average BER of OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.94	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV ocnHistPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.95	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI ocnHistPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.96	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTNAVGBERValue object to 0.
UNS ocnHistPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.97	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.98	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV ocnHistPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.99	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI ocnHistPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.100	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMNBITCR64BitValue object to 0.
UNS ocnHistPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.101	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.102	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV ocnHistPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.103	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI ocnHistPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.104	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMNBYTCR64BitValue object to 0.
U32 ocnHistPMUASSValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.105	Unsigned32	read-write	The count of unavailable seconds at the section layer. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ocnHistPMUASSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.106	DateAndTime	read-only	The date and time stamp of the unavailable seconds at the section layer.
PMV ocnHistPMUASSValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.107	PMValidity	read-only	Indicates the validity of the unavailable seconds at the section layer.
INI ocnHistPMUASSInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.108	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMUASSValue object to 0.
U32 ocnHistPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.109	Unsigned32	read-write	The count of OTU digital wrapper layer unavailable seconds.
DAT ocnHistPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.110	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer unavailable seconds value.
PMV ocnHistPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.111	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer unavailable seconds value.
INI ocnHistPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.112	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOTUUASValue object to 0.
FIX ocnHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.113	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT ocnHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.114	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV ocnHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.115	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI ocnHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.116	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOPRMinValue object to 0.
FIX ocnHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.117	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT ocnHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.118	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV ocnHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.119	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI ocnHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.120	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOPRMaxValue object to 0.
FIX ocnHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.121	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT ocnHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.122	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV ocnHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.123	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI ocnHistPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.124	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOPRAvgValue object to 0.
FIX ocnHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.125	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT ocnHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.126	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV ocnHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.127	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI ocnHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.128	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOPTMinValue object to 0.
FIX ocnHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.129	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT ocnHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.130	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV ocnHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.131	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI ocnHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.132	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOPTMaxValue object to 0.
FIX ocnHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.9.1.133	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT ocnHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.9.1.134	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV ocnHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.9.1.135	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI ocnHistPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.9.1.136	InitializeCmd	read-write	Used to initialize the value of the ocnHistPMOPTAvgValue object to 0.
ocnPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.10		not-accessible	A table of threshold levels for performance monitoring counter values on SONET OC-N facilities, that are used in the generation of threshold crossing alerts.
ocnPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.10.1		not-accessible	The row entry object of the SONET OC-N performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual OC-N facility.
OCN ocnPMThresholdTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.10.1.1	OcnType	not-accessible	The type of the OC-N facility targeted for PM thresholds.
INT ocnPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.10.1.2	INTEGER	not-accessible	The shelf number on which the OC-N facility targeted for PM thresholds is provisioned.
INT ocnPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.10.1.3	INTEGER	not-accessible	The slot number on which the OC-N facility targeted for PM thresholds is provisioned.
INT ocnPMThresholdPortIdx	1.3.6.1.4.1.18070.2.2.1.6.10.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the OC-N facility targeted for PM thresholds is provisioned.
NUM ocnPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.10.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 ocnPMThresholdCVSValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.6	Unsigned32	read-write	The threshold for the count of coding violations at the section layer.
U32 ocnPMThresholdESSValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.7	Unsigned32	read-write	The threshold for the count of errored seconds at the section layer.
U32 ocnPMThresholdSESSValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.8	Unsigned32	read-write	The threshold fro the count of severely errored seconds at the section layer.
U32 ocnPMThresholdSEFSSValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.9	Unsigned32	read-write	The threshold for the count of severely errored framing seconds at the section layer.
U32 ocnPMThresholdCVLValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.10	Unsigned32	read-write	The threshold for the count of coding violations at the line layer.
U32 ocnPMThresholdESLValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.11	Unsigned32	read-write	The threshold for the count of errored seconds at the line layer.
U32 ocnPMThresholdSESLValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.12	Unsigned32	read-write	The threshold for the count of severely errored seconds at the line layer.
U32 ocnPMThresholdUASLValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.13	Unsigned32	read-write	The threshold for the count of unavailable seconds at the line layer.
U32 ocnPMThresholdOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.14	Unsigned32	read-write	The threshold for the count of errored blocks at the OTU digital wrapper layer.
U32 ocnPMThresholdOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.15	Unsigned32	read-write	The threshold for the count of background block errors at the OTU digital wrapper layer.
U32 ocnPMThresholdOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.16	Unsigned32	read-write	The threshold for the count of errored seconds at the OTU digital wrapper layer.
U32 ocnPMThresholdOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.17	Unsigned32	read-write	The threshold for the count of severely errored seconds at the OTU digital wrapper layer.
U32 ocnPMThresholdOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.18	Unsigned32	read-write	The threshold for the count of out-of-frame seconds at the OTU digital wrapper layer.
U32 ocnPMThresholdUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.21	Unsigned32	read-write	The threshold for the count of uncorrectable codewords.
U32 ocnPMThresholdUASSValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.22	Unsigned32	read-write	The threshold for the count of unavailable seconds at the section layer.
U32 ocnPMThresholdOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.10.1.23	Unsigned32	read-write	The threshold for the count of unavailable seconds at the OTU digital wrapper layer.
stsnCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.11		not-accessible	A table of current performance monitoring statistics collected for the SONET STS-N facilities on the NE.
stsnCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.11.1		not-accessible	The row entry object of the SONET STS-N current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given STS-N facility.
STS stsnCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.11.1.1	StsnType	not-accessible	The type of STS-N facility targeted for PMs.
INT stsnCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.11.1.2	INTEGER	not-accessible	The number of the shelf of the STS-N facility targeted for PMs.
INT stsnCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.11.1.3	INTEGER	not-accessible	The number of the slot of the STS-N facility targeted for PMs.
INT stsnCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.11.1.4	INTEGER	not-accessible	The number of the port on the circuit pack of the STS-N facility targeted for PMs.
INT stsnCrntPMIdx	1.3.6.1.4.1.18070.2.2.1.6.11.1.5	INTEGER	not-accessible	The sts index number of the STS-N facility targeted for PMs.
NUM stsnCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.11.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
U32 stsnCrntPMCVPValue	1.3.6.1.4.1.18070.2.2.1.6.11.1.7	Unsigned32	read-write	The count of coding violations at the path layer.
DAT stsnCrntPMCVPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.11.1.8	DateAndTime	read-only	The date and time stamp of the path layer coding violations value.
PMV stsnCrntPMCVPValidity	1.3.6.1.4.1.18070.2.2.1.6.11.1.9	PMValidity	read-only	Indicates the validity of the provided path layer coding violations value.
U32 stsnCrntPMESPValue	1.3.6.1.4.1.18070.2.2.1.6.11.1.10	Unsigned32	read-write	The count of errored seconds at the path layer.
DAT stsnCrntPMESPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.11.1.11	DateAndTime	read-only	The date and time stamp of the path layer errored seconds value.
PMV stsnCrntPMESPValidity	1.3.6.1.4.1.18070.2.2.1.6.11.1.12	PMValidity	read-only	Indicates the validity of the provided path layer errored seconds value.
U32 stsnCrntPMSESPValue	1.3.6.1.4.1.18070.2.2.1.6.11.1.13	Unsigned32	read-write	The count of severely errored seconds at the path layer.
DAT stsnCrntPMSESPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.11.1.14	DateAndTime	read-only	The date and time stamp of the path layer severely errored seconds value.
PMV stsnCrntPMSESPValidity	1.3.6.1.4.1.18070.2.2.1.6.11.1.15	PMValidity	read-only	Indicates the validity of the provided path layer severely errored seconds value.
U32 stsnCrntPMUASPValue	1.3.6.1.4.1.18070.2.2.1.6.11.1.16	Unsigned32	read-write	The count of unavailable seconds at the path layer.
DAT stsnCrntPMUASPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.11.1.17	DateAndTime	read-only	The date and time stamp of the path layer unavailable seconds value.
PMV stsnCrntPMUASPValidity	1.3.6.1.4.1.18070.2.2.1.6.11.1.18	PMValidity	read-only	Indicates the validity of the provided path layer unavailable seconds value.
U32 stsnCrntPMFCPValue	1.3.6.1.4.1.18070.2.2.1.6.11.1.19	Unsigned32	read-write	The failure count at the path layer.
DAT stsnCrntPMFCPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.11.1.20	DateAndTime	read-only	The date and time stamp of the path layer failure count value.
PMV stsnCrntPMFCPValidity	1.3.6.1.4.1.18070.2.2.1.6.11.1.21	PMValidity	read-only	Indicates the validity of the provided path layer failure count value.
INI stsnCrntPMCVPInitialize	1.3.6.1.4.1.18070.2.2.1.6.11.1.22	InitializeCmd	read-write	Used to initialize the value of the stsnCrntPMCVPValue object to 0.
INI stsnCrntPMESPInitialize	1.3.6.1.4.1.18070.2.2.1.6.11.1.23	InitializeCmd	read-write	Used to initialize the value of the stsnCrntPMESPValue object to 0.
INI stsnCrntPMSESPInitialize	1.3.6.1.4.1.18070.2.2.1.6.11.1.24	InitializeCmd	read-write	Used to initialize the value of the stsnCrntPMSESPValue object to 0.
INI stsnCrntPMUASPInitialize	1.3.6.1.4.1.18070.2.2.1.6.11.1.25	InitializeCmd	read-write	Used to initialize the value of the stsnCrntPMUASPValue object to 0.
INI stsnCrntPMFCPInitialize	1.3.6.1.4.1.18070.2.2.1.6.11.1.26	InitializeCmd	read-write	Used to initialize the value of the stsnCrntPMFCPValue object to 0.
stsnHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.12		not-accessible	A table of historical performance monitoring statistics collected for the SONET STS-N facilities on the NE.
stsnHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.12.1		not-accessible	The row entry object of the SONET STS-N historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given STS-N facility.
STS stsnHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.1	StsnType	not-accessible	The type of the STS-N facility targeted for PMs.
INT stsnHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.2	INTEGER	not-accessible	The number of the shelf of the STS-N facility targeted for PMs.
INT stsnHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.3	INTEGER	not-accessible	The number of the slot of the STS-N facility targeted for PMs.
INT stsnHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.4	INTEGER	not-accessible	The number of the port on the circuit pack of the STS-N facility targeted for PMs.
INT stsnHistPMIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.5	INTEGER	not-accessible	The sts index number of the STS-N facility targeted for PMs.
NUM stsnHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT stsnHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.12.1.7	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
U32 stsnHistPMCVPValue	1.3.6.1.4.1.18070.2.2.1.6.12.1.8	Unsigned32	read-write	The count of coding violations at the path layer.
DAT stsnHistPMCVPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.12.1.9	DateAndTime	read-only	The date and time stamp of the path layer coding violations value.
PMV stsnHistPMCVPValidity	1.3.6.1.4.1.18070.2.2.1.6.12.1.10	PMValidity	read-only	Indicates the validity of the provided path layer coding violations value.
U32 stsnHistPMESPValue	1.3.6.1.4.1.18070.2.2.1.6.12.1.11	Unsigned32	read-write	The count of errored seconds at the path layer.
DAT stsnHistPMESPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.12.1.12	DateAndTime	read-only	The date and time stamp of the path layer errored seconds value.
PMV stsnHistPMESPValidity	1.3.6.1.4.1.18070.2.2.1.6.12.1.13	PMValidity	read-only	Indicates the validity of the provided path layer errored seconds value.
U32 stsnHistPMSESPValue	1.3.6.1.4.1.18070.2.2.1.6.12.1.14	Unsigned32	read-write	The count of severely errored seconds at the path layer.
DAT stsnHistPMSESPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.12.1.15	DateAndTime	read-only	The date and time stamp of the path layer severely errored seconds value.
PMV stsnHistPMSESPValidity	1.3.6.1.4.1.18070.2.2.1.6.12.1.16	PMValidity	read-only	Indicates the validity of the provided path layer severely errored seconds value.
U32 stsnHistPMUASPValue	1.3.6.1.4.1.18070.2.2.1.6.12.1.17	Unsigned32	read-write	The count of unavailable seconds at the path layer.
DAT stsnHistPMUASPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.12.1.18	DateAndTime	read-only	The date and time stamp of the path layer unavailable seconds value.
PMV stsnHistPMUASPValidity	1.3.6.1.4.1.18070.2.2.1.6.12.1.19	PMValidity	read-only	Indicates the validity of the provided path layer unavailable seconds value.
U32 stsnHistPMFCPValue	1.3.6.1.4.1.18070.2.2.1.6.12.1.20	Unsigned32	read-write	The failure count at the path layer.
DAT stsnHistPMFCPTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.12.1.21	DateAndTime	read-only	The date and time stamp of the path layer failure count.
PMV stsnHistPMFCPValidity	1.3.6.1.4.1.18070.2.2.1.6.12.1.22	PMValidity	read-only	Indicates the validity of the provided path layer failure count.
INI stsnHistPMCVPInitialize	1.3.6.1.4.1.18070.2.2.1.6.12.1.23	InitializeCmd	read-write	Used to initialize the value of the stsnHistPMCVPValue object to 0.
INI stsnHistPMESPInitialize	1.3.6.1.4.1.18070.2.2.1.6.12.1.24	InitializeCmd	read-write	Used to initialize the value of the stsnHistPMESPValue object to 0.
INI stsnHistPMSESPInitialize	1.3.6.1.4.1.18070.2.2.1.6.12.1.25	InitializeCmd	read-write	Used to initialize the value of the stsnHistPMSESPValue object to 0.
INI stsnHistPMUASPInitialize	1.3.6.1.4.1.18070.2.2.1.6.12.1.26	InitializeCmd	read-write	Used to initialize the value of the stsnHistPMUASPValue object to 0.
INI stsnHistPMFCPInitialize	1.3.6.1.4.1.18070.2.2.1.6.12.1.27	InitializeCmd	read-write	Used to initialize the value of the stsnHistPMFCPValue object to 0.
stsnPMThresholdByPortTable	1.3.6.1.4.1.18070.2.2.1.6.13		not-accessible	A table of threshold levels for performance monitoring counter values on SONET STS-N facilities, that are used in the generation of threshold crossing alerts. The STS-N threshold settings will be the same for all STS channels on a given OC-N facility port.
stsnPMThresholdByPortEntry	1.3.6.1.4.1.18070.2.2.1.6.13.1		not-accessible	The row entry object of the SONET STS-N performance monitoring threshold by port table. Each row of this table contains a set of PM thresholds for a given interval type that applies to all the STS-N channels on an OC-N facility port.
STS stsnPMThresholdByPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.13.1.1	StsnType	not-accessible	The type of the STS-N facilities targeted for PM thresholds.
INT stsnPMThresholdByPortShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.13.1.2	INTEGER	not-accessible	The shelf number of the STS-N facilities targeted for PM thresholds.
INT stsnPMThresholdByPortSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.13.1.3	INTEGER	not-accessible	The slot number of the STS-N facilities targeted for PM thresholds.
INT stsnPMThresholdByPortIdx	1.3.6.1.4.1.18070.2.2.1.6.13.1.4	INTEGER	not-accessible	The number of the port on the circuit pack of the STS-N facilities targeted for PM thresholds.
NUM stsnPMThresholdByPortIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.13.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 stsnPMThresholdByPortCVPValue	1.3.6.1.4.1.18070.2.2.1.6.13.1.6	Unsigned32	read-write	The threshold for the count of coding violations at the path layer.
U32 stsnPMThresholdByPortESPValue	1.3.6.1.4.1.18070.2.2.1.6.13.1.9	Unsigned32	read-write	The threshold for the count of errored seconds at the path layer.
U32 stsnPMThresholdByPortSESPValue	1.3.6.1.4.1.18070.2.2.1.6.13.1.10	Unsigned32	read-write	The threshold for the count of severely errored seconds at the path layer.
U32 stsnPMThresholdByPortUASPValue	1.3.6.1.4.1.18070.2.2.1.6.13.1.11	Unsigned32	read-write	The threshold for the count of unavailable seconds at the path layer.
U32 stsnPMThresholdByPortFCPValue	1.3.6.1.4.1.18070.2.2.1.6.13.1.12	Unsigned32	read-write	The threshold for the failure count at the path layer.
stmnCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.14		not-accessible	A table of current performance monitoring statistics collected for the SDH STM-N facilities on the NE.
stmnCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.14.1		not-accessible	The row entry object of the SDH STM-N current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given STM-N facility.
STM stmnCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.14.1.1	StmnType	not-accessible	The type of STM-N facility targeted for PMs.
INT stmnCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.14.1.2	INTEGER	not-accessible	The number of the shelf on which the STM-N facility targeted for PMs is provisioned.
INT stmnCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.14.1.3	INTEGER	not-accessible	The number of the slot within which the STM-N facility targeted for PMs is provisioned.
INT stmnCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.14.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the STM-N facility targeted for PMs is provisioned.
NUM stmnCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.14.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX stmnCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.6	FixedX10	read-only	The optical power received on the input of the OC-N facility port.
DAT stmnCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV stmnCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX stmnCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.9	FixedX10	read-only	The optical power transmitted at the output of the STM-N facility port.
DAT stmnCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV stmnCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT stmnCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.12	INTEGER	read-only	The temperature measured on the STM-N facility port.
DAT stmnCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV stmnCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX stmnCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.15	FixedX10	read-only	The supply voltage measured on the STM-N facility port.
DAT stmnCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV stmnCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT stmnCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.18	INTEGER	read-only	The laser bias current measured on the STM-N facility port.
DAT stmnCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.19	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV stmnCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.20	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 stmnCrntPMRSEBValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.21	Unsigned32	read-write	The count of regenerator section errored blocks.
DAT stmnCrntPMRSEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.22	DateAndTime	read-only	The date and time stamp of the regenerator section errored blocks value.
PMV stmnCrntPMRSEBValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.23	PMValidity	read-only	Indicates the validity of the provided regenerator section errored blocks value.
U32 stmnCrntPMRSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.24	Unsigned32	read-write	The count of regenerator section background block errors.
DAT stmnCrntPMRSBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.25	DateAndTime	read-only	The date and time stamp of the regenerator section background block errors value.
PMV stmnCrntPMRSBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.26	PMValidity	read-only	Indicates the validity of the provided regenerator section background block errors value.
U32 stmnCrntPMRSESValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.27	Unsigned32	read-write	The count of regenerator section errored seconds.
DAT stmnCrntPMRSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.28	DateAndTime	read-only	The date and time stamp of the regenerator section errored seconds value.
PMV stmnCrntPMRSESValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.29	PMValidity	read-only	Indicates the validity of the provided regenerator section errored seconds value.
U32 stmnCrntPMRSSESValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.30	Unsigned32	read-write	The count of regenerator section severely errored seconds.
DAT stmnCrntPMRSSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.31	DateAndTime	read-only	The date and time stamp of the regenerator section severely errored seconds value.
PMV stmnCrntPMRSSESValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.32	PMValidity	read-only	Indicates the validity of the provided regenerator section severely errored seconds value.
U32 stmnCrntPMRSOFSValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.33	Unsigned32	read-write	The count of regenerator section out-of-frame seconds.
DAT stmnCrntPMRSOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.34	DateAndTime	read-only	The date and time stamp of the regenerator section out-of-frame seconds value.
PMV stmnCrntPMRSOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.35	PMValidity	read-only	Indicates the validity of the provided regenerator section out-of-frame seconds value.
FIX stmnCrntPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.14.1.36	FixedX10	read-only	The value of the second supply voltage source measured on the STM-N facility port transceiver.
DAT stmnCrntPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.37	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV stmnCrntPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.14.1.38	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
U32 stmnCrntPMMSEBValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.39	Unsigned32	read-write	The count of multiplex section errored blocks.
DAT stmnCrntPMMSEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.40	DateAndTime	read-only	The date and time stamp of the multiplex section errored blocks value.
PMV stmnCrntPMMSEBValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.41	PMValidity	read-only	Indicates the validity of the provided multiplex section errored blocks value.
U32 stmnCrntPMMSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.42	Unsigned32	read-write	The count of multiplex section background block errors.
DAT stmnCrntPMMSBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.43	DateAndTime	read-only	The date and time stamp of the multiplex section background block errors value.
PMV stmnCrntPMMSBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.44	PMValidity	read-only	Indicates the validity of the provided multiplex section background block errors value.
U32 stmnCrntPMMSESValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.45	Unsigned32	read-write	The count of multiplex section errored seconds.
DAT stmnCrntPMMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.46	DateAndTime	read-only	The date and time stamp of the multiplex section errored seconds value.
PMV stmnCrntPMMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.47	PMValidity	read-only	Indicates the validity of the provided multiplex section errored seconds value.
U32 stmnCrntPMMSSESValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.48	Unsigned32	read-write	The count of multiplex section severely errored seconds.
DAT stmnCrntPMMSSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.49	DateAndTime	read-only	The date and time stamp of the multiplex section severely errored seconds value.
PMV stmnCrntPMMSSESValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.50	PMValidity	read-only	Indicates the validity of the provided multiplex section severely errored seconds value.
U32 stmnCrntPMMSUASValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.51	Unsigned32	read-write	The count of multiplex section unavailable seconds.
DAT stmnCrntPMMSUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.52	DateAndTime	read-only	The date and time stamp of the multiplex section unavailable seconds value.
PMV stmnCrntPMMSUASValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.53	PMValidity	read-only	Indicates the validity of the provided multiplex section unavailable seconds value.
U32 stmnCrntPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.54	Unsigned32	read-write	The count of OTU digital wrapper layer errored blocks.
DAT stmnCrntPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.55	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored blocks value.
PMV stmnCrntPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.56	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored blocks value.
U32 stmnCrntPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.57	Unsigned32	read-write	The count of OTU digital wrapper layer background block errors.
DAT stmnCrntPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.58	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer background block errors value.
PMV stmnCrntPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.59	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer background block errors value.
U32 stmnCrntPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.60	Unsigned32	read-write	The count of OTU digital wrapper layer errored seconds.
DAT stmnCrntPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.61	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored seconds value.
PMV stmnCrntPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.62	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored seconds value.
U32 stmnCrntPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.63	Unsigned32	read-write	The count of OTU digital wrapper layer severely errored seconds.
DAT stmnCrntPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.64	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer severely errored seconds value.
PMV stmnCrntPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.65	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored seconds value.
U32 stmnCrntPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.66	Unsigned32	read-write	The count of OTU digital wrapper layer out-of-frame seconds.
DAT stmnCrntPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.67	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer out-of-frame seconds value.
PMV stmnCrntPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.68	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored framing seconds value.
U32 stmnCrntPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.69	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.70	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV stmnCrntPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.71	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
U32 stmnCrntPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.72	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.73	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV stmnCrntPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.74	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
U32 stmnCrntPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.75	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.76	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV stmnCrntPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.77	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
INI stmnCrntPMRSEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.78	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMRSEBValue object to 0.
INI stmnCrntPMRSBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.79	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMRSBBEValue object to 0.
INI stmnCrntPMRSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.80	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMRSESValue object to 0.
INI stmnCrntPMRSSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.81	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMRSSESValue object to 0.
INI stmnCrntPMRSOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.82	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMRSOFSValue object to 0.
INI stmnCrntPMMSEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.83	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMMSEBValue object to 0.
INI stmnCrntPMMSBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.84	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMMSBBEValue object to 0.
INI stmnCrntPMMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.85	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMMSESValue object to 0.
INI stmnCrntPMMSSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.86	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMMSSESValue object to 0.
INI stmnCrntPMMSUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.87	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMMSUASValue object to 0.
INI stmnCrntPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.88	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTUEBValue object to 0.
INI stmnCrntPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.89	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTUBBEValue object to 0.
INI stmnCrntPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.90	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTUESValue object to 0.
INI stmnCrntPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.91	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTUSESValue object to 0.
INI stmnCrntPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.92	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTUOFSValue object to 0.
INI stmnCrntPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.93	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMNBITCRValue object to 0.
INI stmnCrntPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.94	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMNBYTCRValue object to 0.
INI stmnCrntPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.95	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMUNCRCDWValue object to 0.
STR stmnCrntPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.96	DisplayString	read-only	The instantaneous BER of STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.97	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV stmnCrntPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.98	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI stmnCrntPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.99	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTNBERValue object to 0.
STR stmnCrntPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.100	DisplayString	read-only	The interval/average BER of STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.101	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV stmnCrntPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.102	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI stmnCrntPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.103	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTNAVGBERValue object to 0.
UNS stmnCrntPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.104	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.105	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV stmnCrntPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.106	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI stmnCrntPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.107	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMNBITCR64BitValue object to 0.
UNS stmnCrntPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.108	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.109	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV stmnCrntPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.110	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI stmnCrntPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.111	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMNBYTCR64BitValue object to 0.
U32 stmnCrntPMRSUASValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.112	Unsigned32	read-write	The count of regenerator section unavailable seconds. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnCrntPMRSUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.113	DateAndTime	read-only	The date and time stamp of the regenerator section unavailable seconds value.
PMV stmnCrntPMRSUASValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.114	PMValidity	read-only	Indicates the validity of the provided regenerator section unavailable seconds value.
INI stmnCrntPMRSUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.115	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMRSUASValue object to 0.
U32 stmnCrntPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.116	Unsigned32	read-write	The count of OTU digital wrapper layer unavailable seconds.
DAT stmnCrntPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.117	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer unavailable seconds value.
PMV stmnCrntPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.118	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer unavailable seconds value.
INI stmnCrntPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.119	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOTUUASValue object to 0.
FIX stmnCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.120	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT stmnCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.121	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV stmnCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.122	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI stmnCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.123	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOPRMinValue object to 0.
FIX stmnCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.124	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT stmnCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.125	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV stmnCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.126	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI stmnCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.127	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOPRMaxValue object to 0.
FIX stmnCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.128	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT stmnCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.129	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV stmnCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.130	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI stmnCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.131	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOPRAvgValue object to 0.
FIX stmnCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.132	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT stmnCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.133	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV stmnCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.134	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI stmnCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.135	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOPTMinValue object to 0.
FIX stmnCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.136	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT stmnCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.137	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV stmnCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.138	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI stmnCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.139	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOPTMaxValue object to 0.
FIX stmnCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.14.1.140	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT stmnCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.14.1.141	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV stmnCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.14.1.142	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI stmnCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.14.1.143	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMOPTAvgValue object to 0.
stmnHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.15		not-accessible	A table of historical performance monitoring statistics collected for the SDH STM-N facilities on the NE.
stmnHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.15.1		not-accessible	The row entry object of the SDH STM-N historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given STM-N facility.
STM stmnHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.15.1.1	StmnType	not-accessible	The type of the STM-N facility targeted for PMs.
INT stmnHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.15.1.2	INTEGER	not-accessible	The number of the shelf on which the STM-N facility targeted for PMs is provisioned.
INT stmnHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.15.1.3	INTEGER	not-accessible	The number of the slot within which the STM-N facility targeted for PMs is provisioned.
INT stmnHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.15.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the STM-N facility targeted for PMs is provisioned.
NUM stmnHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.15.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT stmnHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.15.1.6	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX stmnHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.7	FixedX10	read-only	The optical power received on the input of the STM-N facility.
DAT stmnHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.8	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV stmnHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.9	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX stmnHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.10	FixedX10	read-only	The optical power transmitted at the output of the STM-N facility.
DAT stmnHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.11	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV stmnHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.12	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT stmnHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.13	INTEGER	read-only	The temperature measured on the STM-N facility port.
DAT stmnHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.14	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV stmnHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.15	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX stmnHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.16	FixedX10	read-only	The supply voltage measured on the STM-N facility port.
DAT stmnHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.17	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV stmnHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.18	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT stmnHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.19	INTEGER	read-only	The laser bias current measured on the STM-N facility port.
DAT stmnHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.20	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV stmnHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.21	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 stmnHistPMRSEBValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.22	Unsigned32	read-write	The count of regenerator section errored blocks.
DAT stmnHistPMRSEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.23	DateAndTime	read-only	The date and time stamp of the regenerator section errored blocks value.
PMV stmnHistPMRSEBValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.24	PMValidity	read-only	Indicates the validity of the provided regenerator section errored blocks value.
U32 stmnHistPMRSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.25	Unsigned32	read-write	The count of regenerator section background block errors.
DAT stmnHistPMRSBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.26	DateAndTime	read-only	The date and time stamp of the regenerator section background block errors value.
PMV stmnHistPMRSBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.27	PMValidity	read-only	Indicates the validity of the provided regenerator section background block errors value.
U32 stmnHistPMRSESValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.28	Unsigned32	read-write	The count of regenerator section errored seconds.
DAT stmnHistPMRSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.29	DateAndTime	read-only	The date and time stamp of the regenerator section errored seconds value.
PMV stmnHistPMRSESValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.30	PMValidity	read-only	Indicates the validity of the provided regenerator section errored seconds value.
U32 stmnHistPMRSSESValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.31	Unsigned32	read-write	The count of regenerator section severely errored seconds.
DAT stmnHistPMRSSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.32	DateAndTime	read-only	The date and time stamp of the regenerator section severely errored seconds value.
PMV stmnHistPMRSSESValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.33	PMValidity	read-only	Indicates the validity of the provided regenerator section severely errored seconds value.
U32 stmnHistPMRSOFSValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.34	Unsigned32	read-write	The count of regenerator section out-of-frame seconds.
DAT stmnHistPMRSOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.35	DateAndTime	read-only	The date and time stamp of the regenerator section out-of-frame seconds value.
PMV stmnHistPMRSOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.36	PMValidity	read-only	Indicates the validity of the provided regenerator section out-of-frame seconds value.
FIX stmnHistPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.15.1.37	FixedX10	read-only	The value of the second supply voltage source measured on the STM-N facility port transceiver.
DAT stmnHistPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.38	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV stmnHistPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.15.1.39	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
U32 stmnHistPMMSEBValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.40	Unsigned32	read-write	The count of multiplex section errored blocks.
DAT stmnHistPMMSEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.41	DateAndTime	read-only	The date and time stamp of the multiplex section errored blocks value.
PMV stmnHistPMMSEBValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.42	PMValidity	read-only	Indicates the validity of the provided multiplex section errored blocks value.
U32 stmnHistPMMSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.43	Unsigned32	read-write	The count of multiplex section background block errors.
DAT stmnHistPMMSBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.44	DateAndTime	read-only	The date and time stamp of the multiplex section background block errors value.
PMV stmnHistPMMSBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.45	PMValidity	read-only	Indicates the validity of the provided multiplex section background block errors value.
U32 stmnHistPMMSESValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.46	Unsigned32	read-write	The count of multiplex section errored seconds.
DAT stmnHistPMMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.47	DateAndTime	read-only	The date and time stamp of the multiplex section errored seconds value.
PMV stmnHistPMMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.48	PMValidity	read-only	Indicates the validity of the provided multiplex section errored seconds value.
U32 stmnHistPMMSSESValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.49	Unsigned32	read-write	The count of multiplex section severely errored seconds.
DAT stmnHistPMMSSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.50	DateAndTime	read-only	The date and time stamp of the multiplex section severely errored seconds value.
PMV stmnHistPMMSSESValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.51	PMValidity	read-only	Indicates the validity of the provided multiplex section severely errored seconds value.
U32 stmnHistPMMSUASValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.52	Unsigned32	read-write	The count of multiplex section unavailable seconds.
DAT stmnHistPMMSUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.53	DateAndTime	read-only	The date and time stamp of the multiplex section unavailable seconds value.
PMV stmnHistPMMSUASValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.54	PMValidity	read-only	Indicates the validity of the provided multiplex section unavailable seconds value.
U32 stmnHistPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.55	Unsigned32	read-write	The count of OTU digital wrapper layer errored blocks.
DAT stmnHistPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.56	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored blocks value.
PMV stmnHistPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.57	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored blocks value.
U32 stmnHistPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.58	Unsigned32	read-write	The count of OTU digital wrapper layer background block errors.
DAT stmnHistPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.59	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer background block errors value.
PMV stmnHistPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.60	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer background block errors value.
U32 stmnHistPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.61	Unsigned32	read-write	The count of OTU digital wrapper layer errored seconds.
DAT stmnHistPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.62	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored seconds value.
PMV stmnHistPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.63	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored seconds value.
U32 stmnHistPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.64	Unsigned32	read-write	The count of OTU digital wrapper layer severely errored seconds.
DAT stmnHistPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.65	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer severely errored seconds value.
PMV stmnHistPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.66	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored seconds value.
U32 stmnHistPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.67	Unsigned32	read-write	The count of OTU digital wrapper layer out-of-frame seconds.
DAT stmnHistPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.68	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer out-of-frame seconds value.
PMV stmnHistPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.69	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored framing seconds value.
U32 stmnHistPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.70	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.71	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV stmnHistPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.72	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
U32 stmnHistPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.73	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.74	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV stmnHistPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.75	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
U32 stmnHistPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.76	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.77	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV stmnHistPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.78	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
INI stmnHistPMRSEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.79	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMRSEBValue object to 0.
INI stmnHistPMRSBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.80	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMRSBBEValue object to 0.
INI stmnHistPMRSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.81	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMRSESValue object to 0.
INI stmnHistPMRSSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.82	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMRSSESValue object to 0.
INI stmnHistPMRSOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.83	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMRSOFSValue object to 0.
INI stmnHistPMMSEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.84	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMMSEBValue object to 0.
INI stmnHistPMMSBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.85	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMMSBBEValue object to 0.
INI stmnHistPMMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.86	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMMSESValue object to 0.
INI stmnHistPMMSSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.87	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMMSSESValue object to 0.
INI stmnHistPMMSUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.88	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMMSUASValue object to 0.
INI stmnHistPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.89	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTUEBValue object to 0.
INI stmnHistPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.90	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTUBBEValue object to 0.
INI stmnHistPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.91	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTUESValue object to 0.
INI stmnHistPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.92	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTUSESValue object to 0.
INI stmnHistPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.93	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTUOFSValue object to 0.
INI stmnHistPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.94	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMNBITCRValue object to 0.
INI stmnHistPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.95	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMNBYTCRValue object to 0.
INI stmnHistPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.96	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMUNCRCDWValue object to 0.
STR stmnHistPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.97	DisplayString	read-only	The instantaneous BER of STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.98	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV stmnHistPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.99	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI stmnHistPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.100	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTNBERValue object to 0.
STR stmnHistPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.101	DisplayString	read-only	The interval/average BER of STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.102	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV stmnHistPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.103	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI stmnHistPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.104	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTNAVGBERValue object to 0.
UNS stmnHistPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.105	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.106	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV stmnHistPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.107	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI stmnHistPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.108	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMNBITCR64BitValue object to 0.
UNS stmnHistPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.109	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.110	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV stmnHistPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.111	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI stmnHistPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.112	InitializeCmd	read-write	Used to initialize the value of the stmnCrntPMNBYTCR64BitValue object to 0.
U32 stmnHistPMRSUASValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.113	Unsigned32	read-write	The count of regenerator section unavailable seconds. This object applies only to STM-64 line port provisioned for OTN line mapping.
DAT stmnHistPMRSUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.114	DateAndTime	read-only	The date and time stamp of the regenerator section unavailable seconds value.
PMV stmnHistPMRSUASValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.115	PMValidity	read-only	Indicates the validity of the provided regenerator section unavailable seconds value.
INI stmnHistPMRSUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.116	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMRSUASValue object to 0.
U32 stmnHistPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.117	Unsigned32	read-write	The count of OTU digital wrapper layer unavailable seconds.
DAT stmnHistPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.118	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer unavailable seconds value.
PMV stmnHistPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.119	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer unavailable seconds value.
INI stmnHistPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.120	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOTUUASValue object to 0.
FIX stmnHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.121	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT stmnHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.122	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV stmnHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.123	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI stmnHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.124	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOPRMinValue object to 0.
FIX stmnHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.125	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT stmnHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.126	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV stmnHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.127	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI stmnHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.128	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOPRMaxValue object to 0.
FIX stmnHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.129	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT stmnHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.130	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV stmnHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.131	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI stmnHistPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.132	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOPRAvgValue object to 0.
FIX stmnHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.133	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT stmnHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.134	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV stmnHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.135	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI stmnHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.136	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOPTMinValue object to 0.
FIX stmnHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.137	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT stmnHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.138	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV stmnHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.139	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI stmnHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.140	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOPTMaxValue object to 0.
FIX stmnHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.15.1.141	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT stmnHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.15.1.142	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV stmnHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.15.1.143	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI stmnHistPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.15.1.144	InitializeCmd	read-write	Used to initialize the value of the stmnHistPMOPTAvgValue object to 0.
stmnPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.16		not-accessible	A table of threshold levels for performance monitoring counter values on SDH STM-N facilities, that are used in the generation of threshold crossing alerts.
stmnPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.16.1		not-accessible	The row entry object of the SDH STM-N performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual STM-N facility.
STM stmnPMThresholdTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.16.1.1	StmnType	not-accessible	The type of the STM-N facility targeted for PM thresholds.
INT stmnPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.16.1.2	INTEGER	not-accessible	The shelf number on which the STM-N facility targeted for PM thresholds is provisioned.
INT stmnPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.16.1.3	INTEGER	not-accessible	The slot number on which the STM-N facility targeted for PM thresholds is provisioned.
INT stmnPMThresholdPortIdx	1.3.6.1.4.1.18070.2.2.1.6.16.1.4	INTEGER	not-accessible	The number of the port on the circuit pack on which the STM-N facility targeted for PM thresholds is provisioned.
NUM stmnPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.16.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 stmnPMThresholdRSEBValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.6	Unsigned32	read-write	The threshold for the count of regenerator section errored blocks.
U32 stmnPMThresholdRSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.7	Unsigned32	read-write	The threshold for the count of regenerator section background block errors.
U32 stmnPMThresholdRSESValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.8	Unsigned32	read-write	The threshold for the count of regenerator section errored seconds.
U32 stmnPMThresholdRSSESValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.9	Unsigned32	read-write	The threshold for the count of regenerator section severely errored seconds.
U32 stmnPMThresholdRSOFSValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.10	Unsigned32	read-write	The threshold for the count of regenerator section out-of-frame seconds.
U32 stmnPMThresholdMSEBValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.11	Unsigned32	read-write	The threshold for the count of multiplex section errored blocks.
U32 stmnPMThresholdMSBBEValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.12	Unsigned32	read-write	The threshold for the count of multiplex section background block errors.
U32 stmnPMThresholdMSESValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.13	Unsigned32	read-write	The threshold for the count of multiplex section errored seconds.
U32 stmnPMThresholdMSSESValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.14	Unsigned32	read-write	The threshold for the count of multiplex section severely errored seconds.
U32 stmnPMThresholdMSUASValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.15	Unsigned32	read-write	The threshold for the count of multiplex section unavailable seconds.
U32 stmnPMThresholdOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.16	Unsigned32	read-write	The threshold for the count of OTU digital wrapper layer errored blocks.
U32 stmnPMThresholdOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.17	Unsigned32	read-write	The threshold for the count of OTU digital wrapper layer background block errors.
U32 stmnPMThresholdOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.18	Unsigned32	read-write	The threshold for the count of OTU digital wrapper layer errored seconds.
U32 stmnPMThresholdOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.19	Unsigned32	read-write	The threshold for the count of OTU digital wrapper layer severely errored seconds.
U32 stmnPMThresholdOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.20	Unsigned32	read-write	The threshold for the count of OTU digital wrapper layer out-of-frame seconds.
U32 stmnPMThresholdUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.23	Unsigned32	read-write	The threshold for the count of uncorrectable codewords.
U32 stmnPMThresholdRSUASValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.24	Unsigned32	read-write	The threshold for the count of regenerator section unavailable seconds.
U32 stmnPMThresholdOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.16.1.25	Unsigned32	read-write	The threshold for the count of OTU digital wrapper layer unavailable seconds.
vcnCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.17		not-accessible	A table of current performance monitoring statistics collected for the SDH VC-N facilities on the NE.
vcnCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.17.1		not-accessible	The row entry object of the SDH VC-N current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given VC-N facility.
VCN vcnCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.17.1.1	VcnType	not-accessible	The type of VC-N facility targeted for PMs.
INT vcnCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.17.1.2	INTEGER	not-accessible	The number of the shelf of the VC-N facility targeted for PMs.
INT vcnCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.17.1.3	INTEGER	not-accessible	The number of the slot of the VC-N facility targeted for PMs.
INT vcnCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.17.1.4	INTEGER	not-accessible	The number of the port on the circuit pack of the VC-N facility targeted for PMs.
INT vcnCrntPMIdx	1.3.6.1.4.1.18070.2.2.1.6.17.1.5	INTEGER	not-accessible	The channel number of the VC-N facility targeted for PMs.
NUM vcnCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.17.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
U32 vcnCrntPMHPEBValue	1.3.6.1.4.1.18070.2.2.1.6.17.1.7	Unsigned32	read-write	The count of high order path errored blocks.
DAT vcnCrntPMHPEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.17.1.8	DateAndTime	read-only	The date and time stamp of the high order path errored blocks value.
PMV vcnCrntPMHPEBValidity	1.3.6.1.4.1.18070.2.2.1.6.17.1.9	PMValidity	read-only	Indicates the validity of the provided high order path errored blocks value.
U32 vcnCrntPMHPBBEValue	1.3.6.1.4.1.18070.2.2.1.6.17.1.10	Unsigned32	read-write	The count of high order path background block errors.
DAT vcnCrntPMHPBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.17.1.11	DateAndTime	read-only	The date and time stamp of the high order path background block errors value.
PMV vcnCrntPMHPBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.17.1.12	PMValidity	read-only	Indicates the validity of the provided high order path background block errors value.
U32 vcnCrntPMHPESValue	1.3.6.1.4.1.18070.2.2.1.6.17.1.13	Unsigned32	read-write	The count of high order path errored seconds.
DAT vcnCrntPMHPESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.17.1.14	DateAndTime	read-only	The date and time stamp of the high order path errored seconds value.
PMV vcnCrntPMHPESValidity	1.3.6.1.4.1.18070.2.2.1.6.17.1.15	PMValidity	read-only	Indicates the validity of the provided high order path errored seconds value.
U32 vcnCrntPMHPSESValue	1.3.6.1.4.1.18070.2.2.1.6.17.1.16	Unsigned32	read-write	The count of high order path severely errored seconds.
DAT vcnCrntPMHPSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.17.1.17	DateAndTime	read-only	The date and time stamp of the high order path severely errored seconds value.
PMV vcnCrntPMHPSESValidity	1.3.6.1.4.1.18070.2.2.1.6.17.1.18	PMValidity	read-only	Indicates the validity of the provided high order path severely errored seconds value.
U32 vcnCrntPMHPUASValue	1.3.6.1.4.1.18070.2.2.1.6.17.1.19	Unsigned32	read-write	The count of high order path unavailable seconds.
DAT vcnCrntPMHPUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.17.1.20	DateAndTime	read-only	The date and time stamp of the high order path unavailable seconds value.
PMV vcnCrntPMHPUASValidity	1.3.6.1.4.1.18070.2.2.1.6.17.1.21	PMValidity	read-only	Indicates the validity of the provided high order path unavailable seconds value.
INI vcnCrntPMHPEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.17.1.22	InitializeCmd	read-write	Used to initialize the value of the vcnCrntPMHPEBValue object to 0.
INI vcnCrntPMHPBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.17.1.23	InitializeCmd	read-write	Used to initialize the value of the vcnCrntPMHPBBEValue object to 0.
INI vcnCrntPMHPESInitialize	1.3.6.1.4.1.18070.2.2.1.6.17.1.24	InitializeCmd	read-write	Used to initialize the value of the vcnCrntPMHPESValue object to 0.
INI vcnCrntPMHPSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.17.1.25	InitializeCmd	read-write	Used to initialize the value of the vcnCrntPMHPSESValue object to 0.
INI vcnCrntPMHPUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.17.1.26	InitializeCmd	read-write	Used to initialize the value of the vcnCrntPMHPUASValue object to 0.
vcnHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.18		not-accessible	A table of historical performance monitoring statistics collected for the SDH VC-N facilities on the NE.
vcnHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.18.1		not-accessible	The row entry object of the SDH VC-N historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given VC-N facility.
VCN vcnHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.1	VcnType	not-accessible	The type of the VC-N facility targeted for PMs.
INT vcnHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.2	INTEGER	not-accessible	The number of the shelf of the VC-N facility targeted for PMs.
INT vcnHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.3	INTEGER	not-accessible	The number of the slot of the VC-N facility targeted for PMs.
INT vcnHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.4	INTEGER	not-accessible	The number of the port on the circuit pack of the VC-N facility targeted for PMs.
INT vcnHistPMIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.5	INTEGER	not-accessible	The channel number of the VC-N facility targeted for PMs.
NUM vcnHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT vcnHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.18.1.7	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
U32 vcnHistPMHPEBValue	1.3.6.1.4.1.18070.2.2.1.6.18.1.8	Unsigned32	read-write	The count of high order path errored blocks.
DAT vcnHistPMHPEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.18.1.9	DateAndTime	read-only	The date and time stamp of the high order path errored blocks value.
PMV vcnHistPMHPEBValidity	1.3.6.1.4.1.18070.2.2.1.6.18.1.10	PMValidity	read-only	Indicates the validity of the provided high order path errored blocks value.
U32 vcnHistPMHPBBEValue	1.3.6.1.4.1.18070.2.2.1.6.18.1.11	Unsigned32	read-write	The count of high order path background block errors.
DAT vcnHistPMHPBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.18.1.12	DateAndTime	read-only	The date and time stamp of the high order path background block errors value.
PMV vcnHistPMHPBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.18.1.13	PMValidity	read-only	Indicates the validity of the provided high order path background block errors value.
U32 vcnHistPMHPESValue	1.3.6.1.4.1.18070.2.2.1.6.18.1.14	Unsigned32	read-write	The count of high order path errored seconds.
DAT vcnHistPMHPESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.18.1.15	DateAndTime	read-only	The date and time stamp of the high order path errored seconds value.
PMV vcnHistPMHPESValidity	1.3.6.1.4.1.18070.2.2.1.6.18.1.16	PMValidity	read-only	Indicates the validity of the high order path errored seconds value.
U32 vcnHistPMHPSESValue	1.3.6.1.4.1.18070.2.2.1.6.18.1.17	Unsigned32	read-write	The count of high order path severely errored seconds.
DAT vcnHistPMHPSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.18.1.18	DateAndTime	read-only	The date and time stamp of the high order path severely errored seconds value.
PMV vcnHistPMHPSESValidity	1.3.6.1.4.1.18070.2.2.1.6.18.1.19	PMValidity	read-only	Indicates the validity of the provided high order path severely errored seconds value.
U32 vcnHistPMHPUASValue	1.3.6.1.4.1.18070.2.2.1.6.18.1.20	Unsigned32	read-write	The count of high order path unavailable seconds.
DAT vcnHistPMHPUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.18.1.21	DateAndTime	read-only	The date and time stamp of the high order path unavailable seconds value.
PMV vcnHistPMHPUASValidity	1.3.6.1.4.1.18070.2.2.1.6.18.1.22	PMValidity	read-only	Indicates the validity of the provided high order path unavailable seconds value.
INI vcnHistPMHPEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.18.1.23	InitializeCmd	read-write	Used to initialize the value of the vcnHistPMHPEBValue object to 0.
INI vcnHistPMHPBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.18.1.24	InitializeCmd	read-write	Used to initialize the value of the vcnHistPMHPBBEValue object to 0.
INI vcnHistPMHPESInitialize	1.3.6.1.4.1.18070.2.2.1.6.18.1.25	InitializeCmd	read-write	Used to initialize the value of the vcnHistPMHPESValue object to 0.
INI vcnHistPMHPSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.18.1.26	InitializeCmd	read-write	Used to initialize the value of the vcnHistPMHPSESValue object to 0.
INI vcnHistPMHPUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.18.1.27	InitializeCmd	read-write	Used to initialize the value of the vcnHistPMHPUASValue object to 0.
vcnPMThresholdByPortTable	1.3.6.1.4.1.18070.2.2.1.6.19		not-accessible	A table of threshold levels for performance monitoring counter values on SDH VC-N facilities, that are used in the generation of threshold crossing alerts. The VC-N threshold settings will be the same for all channels on a given STM-N facility port.
vcnPMThresholdByPortEntry	1.3.6.1.4.1.18070.2.2.1.6.19.1		not-accessible	The row entry object of the SDH STM-N performance monitoring threshold by port table. Each row of this table contains a set of PM thresholds for a given interval type that applies to all the VC-N channels on an STM-N facility port.
VCN vcnPMThresholdByPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.19.1.1	VcnType	not-accessible	The type of the VC-N facility targeted for PM thresholds.
INT vcnPMThresholdByPortShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.19.1.2	INTEGER	not-accessible	The shelf number of the VC-N facilities targeted for PM thresholds.
INT vcnPMThresholdByPortSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.19.1.3	INTEGER	not-accessible	The slot number of the VC-N facilities targeted for PM thresholds.
INT vcnPMThresholdByPortIdx	1.3.6.1.4.1.18070.2.2.1.6.19.1.4	INTEGER	not-accessible	The number of the port on the circuit pack of the VC-N facilities targeted for PM thresholds.
NUM vcnPMThresholdByPortIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.19.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 vcnPMThresholdByPortHPEBValue	1.3.6.1.4.1.18070.2.2.1.6.19.1.6	Unsigned32	read-write	The threshold for the count of high order path errored blocks.
U32 vcnPMThresholdByPortHPBBEValue	1.3.6.1.4.1.18070.2.2.1.6.19.1.7	Unsigned32	read-write	The threshold for the count of high order path background block errors.
U32 vcnPMThresholdByPortHPESValue	1.3.6.1.4.1.18070.2.2.1.6.19.1.8	Unsigned32	read-write	The threshold for the count of high order path errored seconds.
U32 vcnPMThresholdByPortHPSESValue	1.3.6.1.4.1.18070.2.2.1.6.19.1.9	Unsigned32	read-write	The threshold for the count of high order path severely errored seconds.
U32 vcnPMThresholdByPortHPUASValue	1.3.6.1.4.1.18070.2.2.1.6.19.1.10	Unsigned32	read-write	The threshold for the count of high order path unavailable seconds.
geCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.20		not-accessible	A table of current performance monitoring statistics collected for the Gigabit Ethernet facilities on the NE.
geCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.20.1		not-accessible	The row entry object of the Gigabit Ethernet current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given Gigabit Ethernet facility.
INT geCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.20.1.1	INTEGER	not-accessible	The number of the shelf on which the GE facility targeted for PMs is provisioned.
INT geCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.20.1.2	INTEGER	not-accessible	The number of the slot within which the GE facility targeted for PMs is provisioned.
INT geCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.20.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the GE facility targeted for PMs is provisioned.
NUM geCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.20.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX geCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.5	FixedX10	read-only	The optical power received on the input of the GE facility port.
DAT geCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.6	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV geCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.7	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX geCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.8	FixedX10	read-only	The optical power transmitted at the output of the GE facility port.
DAT geCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.9	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV geCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.10	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT geCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.11	INTEGER	read-only	The temperature measured on the GE facility port.
DAT geCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.12	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV geCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.13	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX geCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.14	FixedX10	read-only	The supply voltage measured on the GE facility port.
DAT geCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.15	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV geCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.16	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT geCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.17	INTEGER	read-only	The laser bias current measured on the GE facility port.
DAT geCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.18	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV geCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.19	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 geCrntPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.20	Unsigned32	read-write	The count of Gigabit Ethernet 8B/10B coding violations.
DAT geCrntPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.21	DateAndTime	read-only	The date and time stamp of the GE coding violations value.
PMV geCrntPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.22	PMValidity	read-only	Indicates the validity of the provided GE coding violations value.
U32 geCrntPMESValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.23	Unsigned32	read-write	The count of GE errored seconds.
DAT geCrntPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.24	DateAndTime	read-only	The date and time stamp of the GE errored seconds value.
PMV geCrntPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.25	PMValidity	read-only	Indicates the validity of the provided GE errored seconds value.
U32 geCrntPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.26	Unsigned32	read-write	The count of GE severely errored seconds.
DAT geCrntPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.27	DateAndTime	read-only	The date and time stamp of the GE severely errored seconds value.
PMV geCrntPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.28	PMValidity	read-only	Indicates the validity of the provided GE severely errored seconds value.
UNS geCrntPMTFRCRXValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.29	Unsigned64	read-only	The Gigabit Ethernet total received frame count.
DAT geCrntPMTFRCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.30	DateAndTime	read-only	The date and time stamp of the GE total received frame count value.
PMV geCrntPMTFRCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.31	PMValidity	read-only	Indicates the validity of the provided GE total received frame count value.
INI geCrntPMTFRCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.32	InitializeCmd	read-write	Used to initialize the value of the geCrntPMTFRCRXValue object to 0.
UNS geCrntPMTFRCTXValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.33	Unsigned64	read-only	The Gigabit Ethernet total transmitted frame count.
DAT geCrntPMTFRCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.34	DateAndTime	read-only	The date and time stamp of the GE total transmitted frame count value.
PMV geCrntPMTFRCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.35	PMValidity	read-only	Indicates the validity of the provided GE total transmitted frame count value.
INI geCrntPMTFRCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.36	InitializeCmd	read-write	Used to initialize the value of the geCrntPMTFRCTXValue object to 0.
U32 geCrntPMFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.37	Unsigned32	read-write	The count of Gigabit Ethernet discarded frames.
DAT geCrntPMFRDRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.38	DateAndTime	read-only	The date and time stamp of the GE discarded frames value.
PMV geCrntPMFRDRValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.39	PMValidity	read-only	Indicates the validity of the provided GE discarded frames value.
U32 geCrntPMFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.40	Unsigned32	read-write	The count of Gigabit Ethernet frame checksum errors.
DAT geCrntPMFCSETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.41	DateAndTime	read-only	The date and time stamp of the GE frame checksum errors value.
PMV geCrntPMFCSEValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.42	PMValidity	read-only	Indicates the validity of the provided GE frame checksum errors value.
UNS geCrntPMTBYCRXValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.43	Unsigned64	read-only	The Gigabit Ethernet total received byte count.
DAT geCrntPMTBYCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.44	DateAndTime	read-only	The date and time stamp of the GE total received byte count value.
PMV geCrntPMTBYCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.45	PMValidity	read-only	Indicates the validity of the provided GE total received byte count value.
INI geCrntPMTBYCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.46	InitializeCmd	read-write	Used to initialize the value of the geCrntPMTBYCRXValue object to 0.
UNS geCrntPMTBYCTXValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.47	Unsigned64	read-only	The Gigabit Ethernet total transmitted byte count.
DAT geCrntPMTBYCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.48	DateAndTime	read-only	The date and time stamp of the GE total transmitted byte count value.
PMV geCrntPMTBYCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.49	PMValidity	read-only	Indicates the validity of the provided GE total transmitted byte count value.
INI geCrntPMTBYCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.50	InitializeCmd	read-write	Used to initialize the value of the geCrntPMTBYCTXValue object to 0.
UNS geCrntPMBCSTValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.51	Unsigned64	read-only	The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames.
DAT geCrntPMBCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.52	DateAndTime	read-only	The date and time stamp of the broadcast packets received count value.
PMV geCrntPMBCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.53	PMValidity	read-only	Indicates the validity of the provided broadcast packets received count value.
INI geCrntPMBCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.54	InitializeCmd	read-write	Used to initialize the value of the geCrntPMBCSTValue object to 0.
UNS geCrntPMMCSTValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.55	Unsigned64	read-only	The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
DAT geCrntPMMCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.56	DateAndTime	read-only	The date and time stamp of the multicast packets received count value.
PMV geCrntPMMCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.57	PMValidity	read-only	Indicates the validity of the provided multicast packets received count value.
INI geCrntPMMCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.58	InitializeCmd	read-write	Used to initialize the value of the geCrntPMMCSTValue object to 0.
UNS geCrntPMSIZE64Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.59	Unsigned64	read-only	The total number of 64 byte frames received (excluding framing bits but including FCS octets).
DAT geCrntPMSIZE64TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.60	DateAndTime	read-only	The date and time stamp of the count of 64-byte packets received.
PMV geCrntPMSIZE64Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.61	PMValidity	read-only	Indicates the validity of the provided count of 64-byte packets packets received.
INI geCrntPMSIZE64Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.62	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZE64Value object to 0.
UNS geCrntPMSIZE65To127Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.63	Unsigned64	read-only	The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geCrntPMSIZE65To127TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.64	DateAndTime	read-only	The date and time stamp of the count of packets between 65 and 127 bytes.
PMV geCrntPMSIZE65To127Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.65	PMValidity	read-only	Indicates the validity of the provided count of packets between 65 and 127 bytes.
INI geCrntPMSIZE65To127Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.66	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZE65To127Value object to 0.
UNS geCrntPMSIZE128To255Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.67	Unsigned64	read-only	The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geCrntPMSIZE128To255TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.68	DateAndTime	read-only	The date and time stamp of the count of packets between 128 and 255 bytes.
PMV geCrntPMSIZE128To255Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.69	PMValidity	read-only	Indicates the validity of the provided count of packets between 128 and 255 bytes.
INI geCrntPMSIZE128To255Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.70	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZE128To255Value object to 0.
UNS geCrntPMSIZE256To511Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.71	Unsigned64	read-only	The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geCrntPMSIZE256To511TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.72	DateAndTime	read-only	The date and time stamp of the count of packets between 256 and 511 bytes.
PMV geCrntPMSIZE256To511Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.73	PMValidity	read-only	Indicates the validity of the provided count of packets between 256 and 511 bytes.
INI geCrntPMSIZE256To511Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.74	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZE256To511Value object to 0.
UNS geCrntPMSIZE512To1023Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.75	Unsigned64	read-only	The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geCrntPMSIZE512To1023TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.76	DateAndTime	read-only	The date and time stamp of the count of packets between 512 and 1023 bytes.
PMV geCrntPMSIZE512To1023Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.77	PMValidity	read-only	Indicates the validity of the provided count of packets between 512 and 1023 bytes.
INI geCrntPMSIZE512To1023Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.78	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZE512To1023Value object to 0.
UNS geCrntPMSIZE1024To1518Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.79	Unsigned64	read-only	The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geCrntPMSIZE1024To1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.80	DateAndTime	read-only	The date and time stamp of the count of packets between 1024 and 1518 bytes.
PMV geCrntPMSIZE1024To1518Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.81	PMValidity	read-only	Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
INI geCrntPMSIZE1024To1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.82	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZE1024To1518Value object to 0.
UNS geCrntPMSIZEOver1518Value	1.3.6.1.4.1.18070.2.2.1.6.20.1.83	Unsigned64	read-only	The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets).
DAT geCrntPMSIZEOver1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.84	DateAndTime	read-only	The date and time stamp of the count of packets over 1518 bytes.
PMV geCrntPMSIZEOver1518Validity	1.3.6.1.4.1.18070.2.2.1.6.20.1.85	PMValidity	read-only	Indicates the validity of the provided count of packets over 1518 bytes.
INI geCrntPMSIZEOver1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.86	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSIZEOver1518Value object to 0.
UNS geCrntPMTPFCRXValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.87	Unsigned64	read-only	The Gigabit Ethernet total received pause frame count.
DAT geCrntPMTPFCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.88	DateAndTime	read-only	The date and time stamp of the GE total received pause frame count value.
PMV geCrntPMTPFCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.89	PMValidity	read-only	Indicates the validity of the provided GE total received pause frame count value.
INI geCrntPMTPFCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.90	InitializeCmd	read-write	Used to initialize the value of the geCrntPMTPFCRXValue object to 0.
UNS geCrntPMTPFCTXValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.91	Unsigned64	read-only	The Gigabit Ethernet total transmitted pause frame count.
DAT geCrntPMTPFCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.92	DateAndTime	read-only	The date and time stamp of the GE total transmitted pause frame count value.
PMV geCrntPMTPFCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.93	PMValidity	read-only	Indicates the validity of the provided GE total transmitted pause frame count value.
INI geCrntPMTPFCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.94	InitializeCmd	read-write	Used to initialize the value of the geCrntPMTPFCTXValue object to 0.
U32 geCrntPMUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.95	Unsigned32	read-write	The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT geCrntPMUSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.96	DateAndTime	read-only	The date and time stamp of the count of undersized packets.
PMV geCrntPMUSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.97	PMValidity	read-only	Indicates the validity of the provided count of undersized packets.
U32 geCrntPMOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.98	Unsigned32	read-write	The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT geCrntPMOSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.99	DateAndTime	read-only	The date and time stamp of the count of oversized packets.
PMV geCrntPMOSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.100	PMValidity	read-only	Indicates the validity of the provided count of oversized packets.
U32 geCrntPMFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.101	Unsigned32	read-write	The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
DAT geCrntPMFRGTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.102	DateAndTime	read-only	The date and time stamp of the count of received packet fragments.
PMV geCrntPMFRGTValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.103	PMValidity	read-only	Indicates the validity of the provided count of received packet fragments.
U32 geCrntPMJABRValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.104	Unsigned32	read-write	The total number of frames received that were longer than 14336 9600 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with non-integral number of octets (Alignment Error).
DAT geCrntPMJABRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.105	DateAndTime	read-only	The date and time stamp of the count of received jabbers.
PMV geCrntPMJABRValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.106	PMValidity	read-only	Indicates the validity of the provided count of received jabbers.
INI geCrntPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.107	InitializeCmd	read-write	Used to initialize the value of the geCrntPMCVValue object to 0.
INI geCrntPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.108	InitializeCmd	read-write	Used to initialize the value of the geCrntPMESValue object to 0.
INI geCrntPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.109	InitializeCmd	read-write	Used to initialize the value of the geCrntPMSESValue object to 0.
INI geCrntPMFCSEInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.110	InitializeCmd	read-write	Used to initialize the value of the geCrntPMFCSEValue object to 0.
INI geCrntPMFRDRInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.111	InitializeCmd	read-write	Used to initialize the value of the geCrntPMFRDRValue object to 0.
INI geCrntPMUSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.112	InitializeCmd	read-write	Used to initialize the value of the geCrntPMUSIZEValue object to 0.
INI geCrntPMOSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.113	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOSIZEValue object to 0.
INI geCrntPMFRGTInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.114	InitializeCmd	read-write	Used to initialize the value of the geCrntPMFRGTValue object to 0.
INI geCrntPMJABRInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.115	InitializeCmd	read-write	Used to initialize the value of the geCrntPMJABRValue object to 0.
U32 geCrntPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.116	Unsigned32	read-write	The count of unavailable seconds. This object applies only to transciever ports provisioned for the gigabit ethernet protocol.
DAT geCrntPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.117	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV geCrntPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.118	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI geCrntPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.119	InitializeCmd	read-write	Used to initialize the value of the geCrntPMUASValue object to 0.
FIX geCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.120	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT geCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.121	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV geCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.122	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI geCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.123	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOPRMinValue object to 0.
FIX geCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.124	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT geCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.125	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV geCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.126	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI geCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.127	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOPRMaxValue object to 0.
FIX geCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.128	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT geCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.129	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV geCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.130	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI geCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.131	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOPRAvgValue object to 0.
FIX geCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.132	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT geCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.133	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV geCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.134	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI geCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.135	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOPTMinValue object to 0.
FIX geCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.136	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT geCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.137	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV geCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.138	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI geCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.139	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOPTMaxValue object to 0.
FIX geCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.20.1.140	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT geCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.20.1.141	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV geCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.20.1.142	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI geCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.20.1.143	InitializeCmd	read-write	Used to initialize the value of the geCrntPMOPTAvgValue object to 0.
geHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.21		not-accessible	A table of historical performance monitoring statistics collected for the Gigabit Ethernet facilities on the NE.
geHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.21.1		not-accessible	The row entry object of the Gigabit Ethernet historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given Gigabit Ethernet facility.
INT geHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.21.1.1	INTEGER	not-accessible	The number of the shelf on which the GE facility targeted for PMs is provisioned.
INT geHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.21.1.2	INTEGER	not-accessible	The number of the slot within which the GE facility targeted for PMs is provisioned.
INT geHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.21.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the GE facility targeted for PMs is provisioned.
NUM geHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.21.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT geHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.21.1.5	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX geHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.6	FixedX10	read-only	The optical power received on the input of the GE facility port.
DAT geHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV geHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX geHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.9	FixedX10	read-only	The optical power transmitted at the output of the GE facility port.
DAT geHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV geHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT geHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.12	INTEGER	read-only	The temperature measured on the GE facility port.
DAT geHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV geHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX geHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.15	FixedX10	read-only	The supply voltage measured on the GE facility port.
DAT geHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV geHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT geHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.18	INTEGER	read-only	The laser bias current measured on the GE facility port.
DAT geHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.19	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV geHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.20	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 geHistPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.21	Unsigned32	read-write	The count of Gigabit Ethernet 8B/10B coding violations.
DAT geHistPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.22	DateAndTime	read-only	The date and time stamp of the GE coding violations value.
PMV geHistPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.23	PMValidity	read-only	Indicates the validity of the provided GE coding violations value.
U32 geHistPMESValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.24	Unsigned32	read-write	The count of GE errored seconds.
DAT geHistPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.25	DateAndTime	read-only	The date and time stamp of the GE errored seconds value.
PMV geHistPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.26	PMValidity	read-only	Indicates the validity of the provided GE errored seconds value.
U32 geHistPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.27	Unsigned32	read-write	The count of GE severely errored seconds.
DAT geHistPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.28	DateAndTime	read-only	The date and time stamp of the GE severely errored seconds value.
PMV geHistPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.29	PMValidity	read-only	Indicates the validity of the provided GE severely errored seconds value.
UNS geHistPMTFRCRXValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.30	Unsigned64	read-only	The Gigabit Ethernet total received byte count.
DAT geHistPMTFRCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.31	DateAndTime	read-only	The date and time stamp of the GE total received byte count value.
PMV geHistPMTFRCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.32	PMValidity	read-only	Indicates the validity of the provided GE total received byte count value.
INI geHistPMTFRCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.33	InitializeCmd	read-write	Used to initialize the value of the geHistPMTBYCRXValue object to 0.
UNS geHistPMTFRCTXValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.34	Unsigned64	read-only	The Gigabit Ethernet total transmitted frame count.
DAT geHistPMTFRCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.35	DateAndTime	read-only	The date and time stamp of the GE total transmitted frame count value.
PMV geHistPMTFRCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.36	PMValidity	read-only	Indicates the validity of the provided GE total transmitted frame count value.
INI geHistPMTFRCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.37	InitializeCmd	read-write	Used to initialize the value of the geHistPMTFRCTXValue object to 0.
U32 geHistPMFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.38	Unsigned32	read-write	The count of Gigabit Ethernet discarded frames.
DAT geHistPMFRDRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.39	DateAndTime	read-only	The date and time stamp of the GE discarded frames value.
PMV geHistPMFRDRValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.40	PMValidity	read-only	Indicates the validity of the provided GE discarded frames value.
U32 geHistPMFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.41	Unsigned32	read-write	The count of Gigabit Ethernet frame checksum errors.
DAT geHistPMFCSETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.42	DateAndTime	read-only	The date and time stamp of the GE frame checksum errors value.
PMV geHistPMFCSEValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.43	PMValidity	read-only	Indicates the validity of the provided GE frame checksum errors value.
UNS geHistPMTBYCRXValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.44	Unsigned64	read-only	The Gigabit Ethernet total received byte count.
DAT geHistPMTBYCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.45	DateAndTime	read-only	The date and time stamp of the GE total received byte count value.
PMV geHistPMTBYCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.46	PMValidity	read-only	Indicates the validity of the provided GE total received byte count value.
INI geHistPMTBYCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.47	InitializeCmd	read-write	Used to initialize the value of the geHistPMTBYCRXValue object to 0.
UNS geHistPMTBYCTXValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.48	Unsigned64	read-only	The Gigabit Ethernet total transmitted byte count.
DAT geHistPMTBYCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.49	DateAndTime	read-only	The date and time stamp of the GE total transmitted byte count value.
PMV geHistPMTBYCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.50	PMValidity	read-only	Indicates the validity of the provided GE total transmitted byte count value.
INI geHistPMTBYCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.51	InitializeCmd	read-write	Used to initialize the value of the geHistPMTBYCTXValue object to 0.
UNS geHistPMBCSTValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.52	Unsigned64	read-only	The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames.
DAT geHistPMBCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.53	DateAndTime	read-only	The date and time stamp of the broadcast packets received count value.
PMV geHistPMBCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.54	PMValidity	read-only	Indicates the validity of the provided broadcast packets received count value.
INI geHistPMBCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.55	InitializeCmd	read-write	Used to initialize the value of the geHistPMBCSTValue object to 0.
UNS geHistPMMCSTValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.56	Unsigned64	read-only	The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
DAT geHistPMMCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.57	DateAndTime	read-only	The date and time stamp of the multicast packets received count value.
PMV geHistPMMCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.58	PMValidity	read-only	Indicates the validity of the provided multicast packets received count value.
INI geHistPMMCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.59	InitializeCmd	read-write	Used to initialize the value of the geHistPMMCSTValue object to 0.
UNS geHistPMSIZE64Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.60	Unsigned64	read-only	The total number of 64 byte frames received (excluding framing bits but including FCS octets).
DAT geHistPMSIZE64TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.61	DateAndTime	read-only	The date and time stamp of the count of 64-byte packets received.
PMV geHistPMSIZE64Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.62	PMValidity	read-only	Indicates the validity of the provided count of 64-byte packets packets received.
INI geHistPMSIZE64Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.63	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZE64Value object to 0.
UNS geHistPMSIZE65To127Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.64	Unsigned64	read-only	The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geHistPMSIZE65To127TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.65	DateAndTime	read-only	The date and time stamp of the count of packets between 65 and 127 bytes.
PMV geHistPMSIZE65To127Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.66	PMValidity	read-only	Indicates the validity of the provided count of packets between 65 and 127 bytes.
INI geHistPMSIZE65To127Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.67	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZE65To127Value object to 0.
UNS geHistPMSIZE128To255Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.68	Unsigned64	read-only	The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geHistPMSIZE128To255TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.69	DateAndTime	read-only	The date and time stamp of the count of packets between 128 and 255 bytes.
PMV geHistPMSIZE128To255Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.70	PMValidity	read-only	Indicates the validity of the provided count of packets between 128 and 255 bytes.
INI geHistPMSIZE128To255Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.71	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZE128To255Value object to 0.
UNS geHistPMSIZE256To511Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.72	Unsigned64	read-only	The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geHistPMSIZE256To511TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.73	DateAndTime	read-only	The date and time stamp of the count of packets between 256 and 511 bytes.
PMV geHistPMSIZE256To511Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.74	PMValidity	read-only	Indicates the validity of the provided count of packets between 256 and 511 bytes.
INI geHistPMSIZE256To511Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.75	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZE256To511Value object to 0.
UNS geHistPMSIZE512To1023Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.76	Unsigned64	read-only	The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geHistPMSIZE512To1023TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.77	DateAndTime	read-only	The date and time stamp of the count of packets between 512 and 1023 bytes.
PMV geHistPMSIZE512To1023Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.78	PMValidity	read-only	Indicates the validity of the provided count of packets between 512 and 1023 bytes.
INI geHistPMSIZE512To1023Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.79	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZE512To1023Value object to 0.
UNS geHistPMSIZE1024To1518Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.80	Unsigned64	read-only	The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT geHistPMSIZE1024To1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.81	DateAndTime	read-only	The date and time stamp of the count of packets between 1024 and 1518 bytes.
PMV geHistPMSIZE1024To1518Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.82	PMValidity	read-only	Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
INI geHistPMSIZE1024To1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.83	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZE1024To1518Value object to 0.
UNS geHistPMSIZEOver1518Value	1.3.6.1.4.1.18070.2.2.1.6.21.1.84	Unsigned64	read-only	The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets).
DAT geHistPMSIZEOver1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.85	DateAndTime	read-only	The date and time stamp of the count of packets over 1518 bytes.
PMV geHistPMSIZEOver1518Validity	1.3.6.1.4.1.18070.2.2.1.6.21.1.86	PMValidity	read-only	Indicates the validity of the provided count of packets over 1518 bytes.
INI geHistPMSIZEOver1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.87	InitializeCmd	read-write	Used to initialize the value of the geHistPMSIZEOver1518Value object to 0.
UNS geHistPMTPFCRXValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.88	Unsigned64	read-only	The Gigabit Ethernet total received pause frame count.
DAT geHistPMTPFCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.89	DateAndTime	read-only	The date and time stamp of the GE total received pause frame count value.
PMV geHistPMTPFCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.90	PMValidity	read-only	Indicates the validity of the provided GE total received pause frame count value.
INI geHistPMTPFCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.91	InitializeCmd	read-write	Used to initialize the value of the geHistPMTPFCRXValue object to 0.
UNS geHistPMTPFCTXValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.92	Unsigned64	read-only	The Gigabit Ethernet total transmitted pause frame count.
DAT geHistPMTPFCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.93	DateAndTime	read-only	The date and time stamp of the GE total transmitted pause frame count value.
PMV geHistPMTPFCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.94	PMValidity	read-only	Indicates the validity of the provided GE total transmitted pause frame count value.
INI geHistPMTPFCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.95	InitializeCmd	read-write	Used to initialize the value of the geHistPMTPFCTXValue object to 0.
U32 geHistPMUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.96	Unsigned32	read-write	The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT geHistPMUSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.97	DateAndTime	read-only	The date and time stamp of the count of undersized packets.
PMV geHistPMUSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.98	PMValidity	read-only	Indicates the validity of the provided count of undersized packets.
U32 geHistPMOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.99	Unsigned32	read-write	The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT geHistPMOSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.100	DateAndTime	read-only	The date and time stamp of the count of oversized packets.
PMV geHistPMOSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.101	PMValidity	read-only	Indicates the validity of the provided count of oversized packets.
U32 geHistPMFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.102	Unsigned32	read-write	The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
DAT geHistPMFRGTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.103	DateAndTime	read-only	The date and time stamp of the count of received packet fragments.
PMV geHistPMFRGTValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.104	PMValidity	read-only	Indicates the validity of the provided count of received packet fragments.
U32 geHistPMJABRValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.105	Unsigned32	read-write	The total number of frames received that were longer than 14336 9600 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with non-integral number of octets (Alignment Error).
DAT geHistPMJABRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.106	DateAndTime	read-only	The date and time stamp of the count of received jabbers.
PMV geHistPMJABRValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.107	PMValidity	read-only	Indicates the validity of the provided count of received jabbers.
INI geHistPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.108	InitializeCmd	read-write	Used to initialize the value of the geHistPMCVValue object to 0.
INI geHistPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.109	InitializeCmd	read-write	Used to initialize the value of the geHistPMESValue object to 0.
INI geHistPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.110	InitializeCmd	read-write	Used to initialize the value of the geHistPMSESValue object to 0.
INI geHistPMFCSEInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.111	InitializeCmd	read-write	Used to initialize the value of the geHistPMFCSEValue object to 0.
INI geHistPMFRDRInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.112	InitializeCmd	read-write	Used to initialize the value of the geHistPMFRDRValue object to 0.
INI geHistPMUSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.113	InitializeCmd	read-write	Used to initialize the value of the geHistPMUSIZEValue object to 0.
INI geHistPMOSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.114	InitializeCmd	read-write	Used to initialize the value of the geHistPMOSIZEValue object to 0.
INI geHistPMFRGTInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.115	InitializeCmd	read-write	Used to initialize the value of the geHistPMFRGTValue object to 0.
INI geHistPMJABRInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.116	InitializeCmd	read-write	Used to initialize the value of the geHistPMJABRValue object to 0.
U32 geHistPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.117	Unsigned32	read-write	The count of unavailable seconds. This object applies only to transciever ports provisioned for the gigabit ethernet protocol.
DAT geHistPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.118	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV geHistPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.119	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI geHistPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.120	InitializeCmd	read-write	Used to initialize the value of the geHistPMUASValue object to 0.
FIX geHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.121	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT geHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.122	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV geHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.123	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI geHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.124	InitializeCmd	read-write	Used to initialize the value of the geHistPMOPRMinValue object to 0.
FIX geHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.125	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT geHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.126	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV geHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.127	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI geHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.128	InitializeCmd	read-write	Used to initialize the value of the geHistPMOPRMaxValue object to 0.
FIX geHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.129	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT geHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.130	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV geHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.131	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI geHistPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.132	InitializeCmd	read-write	Used to initialize the value of the geHistPMOPRAvgValue object to 0.
FIX geHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.133	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT geHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.134	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV geHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.135	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI geHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.136	InitializeCmd	read-write	Used to initialize the value of the geHistPMOPTMinValue object to 0.
FIX geHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.137	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT geHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.138	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV geHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.139	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI geHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.140	InitializeCmd	read-write	Used to initialize the value of the geHistPMOPTMaxValue object to 0.
FIX geHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.21.1.141	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT geHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.21.1.142	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV geHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.21.1.143	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI geHistPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.21.1.144	InitializeCmd	read-write	Used to initialize the value of the geHistPMOPTAvgValue object to 0.
gePMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.22		not-accessible	A table of threshold levels for performance monitoring counter values on Gigabit Ethernet facilities, that are used in the generation of threshold crossing alerts.
gePMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.22.1		not-accessible	The row entry object of the Gigabit Ethernet performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual GE facility.
INT gePMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.22.1.1	INTEGER	not-accessible	The shelf number on which the Gigabit Ethernet facility targeted for PM thresholds is provisioned.
INT gePMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.22.1.2	INTEGER	not-accessible	The slot number on which the Gigabit Ethernet facility targeted for PM thresholds is provisioned.
INT gePMThresholdPortIdx	1.3.6.1.4.1.18070.2.2.1.6.22.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the Gigabit Ethernet facility targeted for PM thresholds is provisioned.
NUM gePMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.22.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 gePMThresholdCVValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.5	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet 8B/10B coding violations.
U32 gePMThresholdESValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.6	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet errored seconds.
U32 gePMThresholdSESValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.7	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet severely errored seconds.
U32 gePMThresholdFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.8	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet discarded frames.
U32 gePMThresholdFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.9	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet frame check sum errors.
U32 gePMThresholdUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.10	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet undersized frames.
U32 gePMThresholdOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.11	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet oversized frames.
U32 gePMThresholdFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.12	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet frame fragments.
U32 gePMThresholdJABRValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.13	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet jabbers.
U32 gePMThresholdUASValue	1.3.6.1.4.1.18070.2.2.1.6.22.1.14	Unsigned32	read-write	The threshold for the count of Gigabit Ethernet unavailable seconds.
fcCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.23		not-accessible	A table of current performance monitoring statistics collected for the Fiber Channel facilities on the NE.
fcCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.23.1		not-accessible	The row entry object of the Fiber Channel current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given Fiber Channel facility.
INT fcCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.23.1.1	INTEGER	not-accessible	The number of the shelf on which the FC facility targeted for PMs is provisioned.
INT fcCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.23.1.2	INTEGER	not-accessible	The number of the slot within which the FC facility targeted for PMs is provisioned.
INT fcCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.23.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the FC facility targeted for PMs is provisioned.
NUM fcCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.23.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX fcCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.5	FixedX10	read-only	The optical power received on the input of the FC facility port.
DAT fcCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.6	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV fcCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.7	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX fcCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.8	FixedX10	read-only	The optical power transmitted at the output of the FC facility port.
DAT fcCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.9	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV fcCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.10	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT fcCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.11	INTEGER	read-only	The temperature measured on the FC facility port.
DAT fcCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.12	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV fcCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.13	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX fcCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.14	FixedX10	read-only	The supply voltage measured on the FC facility port.
DAT fcCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.15	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV fcCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.16	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT fcCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.17	INTEGER	read-only	The laser bias current measured on the FC facility port.
DAT fcCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.18	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV fcCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.19	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 fcCrntPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.20	Unsigned32	read-write	The count of Fiber Channel coding violations.
DAT fcCrntPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.21	DateAndTime	read-only	The date and time stamp of the FC coding violations value.
PMV fcCrntPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.22	PMValidity	read-only	Indicates the validity of the provided FC coding violations value.
U32 fcCrntPMESValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.23	Unsigned32	read-write	The count of FC errored seconds.
DAT fcCrntPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.24	DateAndTime	read-only	The date and time stamp of the FC errored seconds value.
PMV fcCrntPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.25	PMValidity	read-only	Indicates the validity of the provided FC errored seconds value.
U32 fcCrntPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.26	Unsigned32	read-write	The count of FC severely errored seconds.
DAT fcCrntPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.27	DateAndTime	read-only	The date and time stamp of the FC severely errored seconds value.
PMV fcCrntPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.28	PMValidity	read-only	Indicates the validity of the provided FC severely errored seconds value.
INI fcCrntPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.29	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMCVValue object to 0.
INI fcCrntPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.30	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMESValue object to 0.
INI fcCrntPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.31	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMSESValue object to 0.
U32 fcCrntPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.32	Unsigned32	read-write	The count of unavailable seconds. This object applies only to transciever ports provisioned for the fiber channel protocol.
DAT fcCrntPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.33	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV fcCrntPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.34	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI fcCrntPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.35	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMUASValue object to 0.
FIX fcCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.36	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT fcCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.37	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV fcCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.38	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI fcCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.39	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMOPRMinValue object to 0.
FIX fcCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.40	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT fcCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.41	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV fcCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.42	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI fcCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.43	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMOPRMaxValue object to 0.
FIX fcCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.44	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT fcCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.45	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV fcCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.46	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI fcCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.47	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMOPRAvgValue object to 0.
FIX fcCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.48	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT fcCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.49	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV fcCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.50	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI fcCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.51	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMOPTMinValue object to 0.
FIX fcCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.52	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT fcCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.53	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV fcCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.54	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI fcCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.55	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMOPTMaxValue object to 0.
FIX fcCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.23.1.56	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT fcCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.23.1.57	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV fcCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.23.1.58	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI fcCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.23.1.59	InitializeCmd	read-write	Used to initialize the value of the fcCrntPMOPTAvgValue object to 0.
fcHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.24		not-accessible	A table of historical performance monitoring statistics collected for the Fiber Channel facilities on the NE.
fcHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.24.1		not-accessible	The row entry object of the Fiber Channel historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given Fiber Channel facility.
INT fcHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.24.1.1	INTEGER	not-accessible	The number of the shelf on which the FC facility targeted for PMs is provisioned.
INT fcHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.24.1.2	INTEGER	not-accessible	The number of the slot within which the FC facility targeted for PMs is provisioned.
INT fcHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.24.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the FC facility targeted for PMs is provisioned.
NUM fcHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.24.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT fcHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.24.1.5	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX fcHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.6	FixedX10	read-only	The optical power received on the input of the FC facility port.
DAT fcHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV fcHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX fcHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.9	FixedX10	read-only	The optical power transmitted at the output of the FC facility port.
DAT fcHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV fcHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT fcHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.12	INTEGER	read-only	The temperature measured on the FC facility port.
DAT fcHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV fcHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX fcHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.15	FixedX10	read-only	The supply voltage measured on the FC facility port.
DAT fcHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV fcHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT fcHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.18	INTEGER	read-only	The laser bias current measured on the FC facility port.
DAT fcHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.19	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV fcHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.20	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 fcHistPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.21	Unsigned32	read-write	The count of Fiber Channel coding violations.
DAT fcHistPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.22	DateAndTime	read-only	The date and time stamp of the FC coding violations value.
PMV fcHistPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.23	PMValidity	read-only	Indicates the validity of the provided FC coding violations value.
U32 fcHistPMESValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.24	Unsigned32	read-write	The count of FC errored seconds.
DAT fcHistPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.25	DateAndTime	read-only	The date and time stamp of the FC errored seconds value.
PMV fcHistPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.26	PMValidity	read-only	Indicates the validity of the provided FC errored seconds value.
U32 fcHistPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.27	Unsigned32	read-write	The count of FC severely errored seconds.
DAT fcHistPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.28	DateAndTime	read-only	The date and time stamp of the FC severely errored seconds value.
PMV fcHistPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.29	PMValidity	read-only	Indicates the validity of the provided FC severely errored seconds value.
INI fcHistPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.30	InitializeCmd	read-write	Used to initialize the value of the fcHistPMCVValue object to 0.
INI fcHistPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.31	InitializeCmd	read-write	Used to initialize the value of the fcHistPMESValue object to 0.
INI fcHistPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.32	InitializeCmd	read-write	Used to initialize the value of the fcHistPMSESValue object to 0.
U32 fcHistPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.33	Unsigned32	read-write	The count of unavailable seconds. This object applies only to transciever ports provisioned for the fiber channel protocol.
DAT fcHistPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.34	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV fcHistPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.35	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI fcHistPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.36	InitializeCmd	read-write	Used to initialize the value of the fcHistPMUASValue object to 0.
FIX fcHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.37	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT fcHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.38	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV fcHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.39	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI fcHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.40	InitializeCmd	read-write	Used to initialize the value of the fcHistPMOPRMinValue object to 0.
FIX fcHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.41	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT fcHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.42	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV fcHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.43	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI fcHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.44	InitializeCmd	read-write	Used to initialize the value of the fcHistPMOPRMaxValue object to 0.
FIX fcHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.45	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT fcHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.46	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV fcHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.47	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI fcHistPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.48	InitializeCmd	read-write	Used to initialize the value of the fcHistPMOPRAvgValue object to 0.
FIX fcHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.49	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT fcHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.50	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV fcHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.51	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI fcHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.52	InitializeCmd	read-write	Used to initialize the value of the fcHistPMOPTMinValue object to 0.
FIX fcHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.53	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT fcHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.54	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV fcHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.55	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI fcHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.56	InitializeCmd	read-write	Used to initialize the value of the fcHistPMOPTMaxValue object to 0.
FIX fcHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.24.1.57	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT fcHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.24.1.58	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV fcHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.24.1.59	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI fcHistPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.24.1.60	InitializeCmd	read-write	Used to initialize the value of the fcHistPMOPTAvgValue object to 0.
fcPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.25		not-accessible	A table of threshold levels for performance monitoring counter values on Fiber Channel facilities, that are used in the generation of threshold crossing alerts.
fcPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.25.1		not-accessible	The row entry object of the Fiber Channel performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual FC facility.
INT fcPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.25.1.1	INTEGER	not-accessible	The shelf number on which the Fiber Channel facility targeted for PM thresholds is provisioned.
INT fcPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.25.1.2	INTEGER	not-accessible	The slot number on which the Fiber Channel facility targeted for PM thresholds is provisioned.
INT fcPMThresholdPortIdx	1.3.6.1.4.1.18070.2.2.1.6.25.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the Fiber Channel facility targeted for PM thresholds is provisioned.
NUM fcPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.25.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 fcPMThresholdCVValue	1.3.6.1.4.1.18070.2.2.1.6.25.1.5	Unsigned32	read-write	The threshold for the count of Fiber Channel coding violations.
U32 fcPMThresholdESValue	1.3.6.1.4.1.18070.2.2.1.6.25.1.6	Unsigned32	read-write	The threshold for the count of Fiber Channel errored seconds.
U32 fcPMThresholdSESValue	1.3.6.1.4.1.18070.2.2.1.6.25.1.7	Unsigned32	read-write	The threshold for the count of Fiber Channel severely errored seconds.
U32 fcPMThresholdUASValue	1.3.6.1.4.1.18070.2.2.1.6.25.1.8	Unsigned32	read-write	The threshold for the count of Fiber Channel unavailable seconds.
ethL1IFCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.26		not-accessible	A table of current performance monitoring statistics collected for the Ethernet Layer 1 Interface facilities on the NE.
ethL1IFCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.26.1		not-accessible	The row entry object of the Ethernet Layer 1 Interface current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given Ethernet Layer 1 Interface facility.
INT ethL1IFCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.26.1.1	INTEGER	not-accessible	The number of the shelf on which the Ethernet Layer 1 facility targeted for PMs is provisioned.
INT ethL1IFCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.26.1.2	INTEGER	not-accessible	The number of the slot within which the Ethernet Layer 1 facility targeted for PMs is provisioned.
PVX ethL1IFCrntPMPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.26.1.3	PvxL1PortType	not-accessible	The type of Ethernet Layer 1 port targeted for PMs.
INT ethL1IFCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.26.1.4	INTEGER	not-accessible	The number of the port of the identified type targeted for PMs.
NUM ethL1IFCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.26.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
FIX ethL1IFCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.6	FixedX10	read-only	The optical power received on the input of the Ethernet Layer 1 facility port.
DAT ethL1IFCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV ethL1IFCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX ethL1IFCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.9	FixedX10	read-only	The optical power transmitted at the output of the Ethernet Layer 1 facility port.
DAT ethL1IFCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV ethL1IFCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT ethL1IFCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.12	INTEGER	read-only	The temperature measured on the Ethernet Layer 1 facility port.
DAT ethL1IFCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV ethL1IFCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX ethL1IFCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.15	FixedX10	read-only	The supply voltage measured on the Ethernet Layer 1 facility port.
DAT ethL1IFCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV ethL1IFCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
FIX ethL1IFCrntPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.26.1.18	FixedX10	read-only	A second supply voltage value measured on the Ethernet Layer 1 facility port. This object is available only for XFP-equipped Ethernet Interface ports.
DAT ethL1IFCrntPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.19	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV ethL1IFCrntPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.26.1.20	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
INT ethL1IFCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.21	INTEGER	read-only	The laser bias current measured on the Ethernet Layer 1 facility port.
DAT ethL1IFCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.22	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV ethL1IFCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.23	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 ethL1IFCrntPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.24	Unsigned32	read-write	The count of 8B/10B coding violations. This object is only available on Gigabit Ethernet ports.
DAT ethL1IFCrntPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.25	DateAndTime	read-only	The date and time stamp of the coding violations value.
PMV ethL1IFCrntPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.26	PMValidity	read-only	Indicates the validity of the provided coding violations value.
INI ethL1IFCrntPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.27	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMCVValue object to 0.
U32 ethL1IFCrntPMINVBLKValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.28	Unsigned32	read-write	The count of invalid blocks. This object is only available on 10 Gigabit Ethernet ports.
DAT ethL1IFCrntPMINVBLKTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.29	DateAndTime	read-only	The date and time stamp of the invalid blocks value.
PMV ethL1IFCrntPMINVBLKValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.30	PMValidity	read-only	Indicates the validity of the provided invalid blocks value.
INI ethL1IFCrntPMINVBLKInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.31	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMINVBLKValue object to 0.
U32 ethL1IFCrntPMESValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.32	Unsigned32	read-write	The count of Ethernet Layer 1 errored seconds.
DAT ethL1IFCrntPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.33	DateAndTime	read-only	The date and time stamp of the Ethernet Layer 1 errored seconds value.
PMV ethL1IFCrntPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.34	PMValidity	read-only	Indicates the validity of the provided Ethernet Layer 1 errored seconds value.
INI ethL1IFCrntPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.35	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMESValue object to 0.
U32 ethL1IFCrntPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.36	Unsigned32	read-write	The count of Ethernet Layer 1 severely errored seconds.
DAT ethL1IFCrntPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.37	DateAndTime	read-only	The date and time stamp of the Ethernet Layer 1 severely errored seconds value.
PMV ethL1IFCrntPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.38	PMValidity	read-only	Indicates the validity of the provided Ethernet Layer 1 severely errored seconds value.
INI ethL1IFCrntPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.39	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMSESValue object to 0.
U32 ethL1IFCrntPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.40	Unsigned32	read-write	The count of OTU digital wrapper layer errored blocks.
DAT ethL1IFCrntPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.41	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored blocks value.
PMV ethL1IFCrntPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.42	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored blocks value.
INI ethL1IFCrntPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.43	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTUEBValue object to 0.
U32 ethL1IFCrntPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.44	Unsigned32	read-write	The count of OTU digital wrapper layer background block errors.
DAT ethL1IFCrntPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.45	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer background block errors value.
PMV ethL1IFCrntPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.46	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer background block errors value.
INI ethL1IFCrntPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.47	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTUBBEValue object to 0.
U32 ethL1IFCrntPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.48	Unsigned32	read-write	The count of OTU digital wrapper layer errored seconds.
DAT ethL1IFCrntPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.49	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored seconds value.
PMV ethL1IFCrntPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.50	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored seconds value.
INI ethL1IFCrntPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.51	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTUESValue object to 0.
U32 ethL1IFCrntPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.52	Unsigned32	read-write	The count of OTU digital wrapper layer severely errored seconds.
DAT ethL1IFCrntPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.53	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer severely errored seconds value.
PMV ethL1IFCrntPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.54	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored seconds value.
INI ethL1IFCrntPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.55	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTUSESValue object to 0.
U32 ethL1IFCrntPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.56	Unsigned32	read-write	The count of OTU digital wrapper layer out-of-frame seconds.
DAT ethL1IFCrntPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.57	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer out-of-frame seconds value.
PMV ethL1IFCrntPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.58	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer out-of-frame seconds value.
INI ethL1IFCrntPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.59	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTUOFSValue object to 0.
U32 ethL1IFCrntPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.60	Unsigned32	read-write	The count of the number of bits corrected. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFCrntPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.61	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV ethL1IFCrntPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.62	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
INI ethL1IFCrntPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.63	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMNBITCRValue object to 0.
U32 ethL1IFCrntPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.64	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFCrntPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.65	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV ethL1IFCrntPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.66	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
INI ethL1IFCrntPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.67	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMNBYTCRValue object to 0.
U32 ethL1IFCrntPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.68	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFCrntPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.69	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV ethL1IFCrntPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.70	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
INI ethL1IFCrntPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.71	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMUNCRCDWValue object to 0.
STR ethL1IFCrntPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.72	DisplayString	read-only	The instantaneous BER of the line port.
DAT ethL1IFCrntPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.73	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV ethL1IFCrntPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.74	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI ethL1IFCrntPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.75	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTNBERValue object to 0.
STR ethL1IFCrntPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.76	DisplayString	read-only	The interval/average BER of the line port.
DAT ethL1IFCrntPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.77	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV ethL1IFCrntPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.78	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI ethL1IFCrntPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.79	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTNAVGBERValue object to 0.
UNS ethL1IFCrntPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.80	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFCrntPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.81	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV ethL1IFCrntPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.82	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI ethL1IFCrntPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.83	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMNBITCR64BitValue object to 0.
UNS ethL1IFCrntPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.84	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFCrntPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.85	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV ethL1IFCrntPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.86	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI ethL1IFCrntPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.87	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMNBYTCR64BitValue object to 0.
U32 ethL1IFCrntPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.88	Unsigned32	read-write	The count of unavailable seconds. This object is only available on Gigabit Ethernet ports.
DAT ethL1IFCrntPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.89	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV ethL1IFCrntPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.90	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI ethL1IFCrntPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.91	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMUASValue object to 0.
U32 ethL1IFCrntPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.92	Unsigned32	read-write	The count of OTU digital wrapper layer unavailable seconds.
DAT ethL1IFCrntPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.93	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer unavailable seconds value.
PMV ethL1IFCrntPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.94	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer unavailable seconds value.
INI ethL1IFCrntPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.95	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOTUUASValue object to 0.
FIX ethL1IFCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.96	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT ethL1IFCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.97	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV ethL1IFCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.98	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI ethL1IFCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.99	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOPRMinValue object to 0.
FIX ethL1IFCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.100	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT ethL1IFCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.101	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV ethL1IFCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.102	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI ethL1IFCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.103	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOPRMaxValue object to 0.
FIX ethL1IFCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.104	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT ethL1IFCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.105	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV ethL1IFCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.106	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI ethL1IFCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.107	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOPRAvgValue object to 0.
FIX ethL1IFCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.108	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT ethL1IFCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.109	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV ethL1IFCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.110	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI ethL1IFCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.111	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOPTMinValue object to 0.
FIX ethL1IFCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.112	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT ethL1IFCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.113	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV ethL1IFCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.114	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI ethL1IFCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.115	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOPTMaxValue object to 0.
FIX ethL1IFCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.26.1.116	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT ethL1IFCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.26.1.117	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV ethL1IFCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.26.1.118	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI ethL1IFCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.26.1.119	InitializeCmd	read-write	Used to initialize the value of the ethL1IFCrntPMOPTAvgValue object to 0.
ethL1IFHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.27		not-accessible	A table of historical performance monitoring statistics collected for the Ethernet Layer 1 Interface facilities on the NE.
ethL1IFHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.27.1		not-accessible	The row entry object of the Ethernet Layer 1 Interface historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given Ethernet Layer 1 Interface facility.
INT ethL1IFHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.27.1.1	INTEGER	not-accessible	The number of the shelf on which the Ethernet Layer 1 facility targeted for PMs is provisioned.
INT ethL1IFHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.27.1.2	INTEGER	not-accessible	The number of the slot within which the Ethernet Layer 1 facility targeted for PMs is provisioned.
PVX ethL1IFHistPMPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.27.1.3	PvxL1PortType	not-accessible	The type of Ethernet Layer 1 port targeted for PMs.
INT ethL1IFHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.27.1.4	INTEGER	not-accessible	The number of the port of the identified type targeted for PMs.
NUM ethL1IFHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.27.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT ethL1IFHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.27.1.6	INTEGER	not-accessible	The specific PM bin number. The range is 1..96 for 15-minute bins, and for 1-day historical bins, the value is 1.
FIX ethL1IFHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.7	FixedX10	read-only	The optical power received on the input of the Ethernet Layer 1 facility port.
DAT ethL1IFHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.8	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV ethL1IFHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.9	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX ethL1IFHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.10	FixedX10	read-only	The optical power transmitted at the output of the Ethernet Layer 1 facility port.
DAT ethL1IFHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.11	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV ethL1IFHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.12	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT ethL1IFHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.13	INTEGER	read-only	The temperature measured on the Ethernet Layer 1 facility port.
DAT ethL1IFHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.14	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV ethL1IFHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.15	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX ethL1IFHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.16	FixedX10	read-only	The supply voltage measured on the Ethernet Layer 1 facility port.
DAT ethL1IFHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.17	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV ethL1IFHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.18	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
FIX ethL1IFHistPMSupplyVoltage2Value	1.3.6.1.4.1.18070.2.2.1.6.27.1.19	FixedX10	read-only	A second supply voltage value measured on the Ethernet Layer 1 facility port. This object is available only for XFP-equipped Ethernet Interface ports.
DAT ethL1IFHistPMSupplyVoltage2TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.20	DateAndTime	read-only	The date and time stamp of the second supply voltage value.
PMV ethL1IFHistPMSupplyVoltage2Validity	1.3.6.1.4.1.18070.2.2.1.6.27.1.21	PMValidity	read-only	Indicates the validity of the provided second supply voltage value.
INT ethL1IFHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.22	INTEGER	read-only	The laser bias current measured on the Ethernet Layer 1 facility port.
DAT ethL1IFHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.23	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV ethL1IFHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.24	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
U32 ethL1IFHistPMCVValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.25	Unsigned32	read-write	The count of 8B/10B coding violations. This object is only available on Gigabit Ethernet ports.
DAT ethL1IFHistPMCVTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.26	DateAndTime	read-only	The date and time stamp of the coding violations value.
PMV ethL1IFHistPMCVValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.27	PMValidity	read-only	Indicates the validity of the provided coding violations value.
INI ethL1IFHistPMCVInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.28	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMCVValue object to 0.
U32 ethL1IFHistPMINVBLKValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.29	Unsigned32	read-write	The count of invalid blocks. This object is only available on 10 Gigabit Ethernet ports.
DAT ethL1IFHistPMINVBLKTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.30	DateAndTime	read-only	The date and time stamp of the invalid blocks value.
PMV ethL1IFHistPMINVBLKValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.31	PMValidity	read-only	Indicates the validity of the provided invalid blocks value.
INI ethL1IFHistPMINVBLKInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.32	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMINVBLKValue object to 0.
U32 ethL1IFHistPMESValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.33	Unsigned32	read-write	The count of Ethernet Layer 1 errored seconds.
DAT ethL1IFHistPMESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.34	DateAndTime	read-only	The date and time stamp of the Ethernet Layer 1 errored seconds value.
PMV ethL1IFHistPMESValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.35	PMValidity	read-only	Indicates the validity of the provided Ethernet Layer 1 errored seconds value.
INI ethL1IFHistPMESInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.36	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMESValue object to 0.
U32 ethL1IFHistPMSESValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.37	Unsigned32	read-write	The count of Ethernet Layer 1 severely errored seconds.
DAT ethL1IFHistPMSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.38	DateAndTime	read-only	The date and time stamp of the Ethernet Layer 1 severely errored seconds value.
PMV ethL1IFHistPMSESValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.39	PMValidity	read-only	Indicates the validity of the provided Ethernet Layer 1 severely errored seconds value.
INI ethL1IFHistPMSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.40	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMSESValue object to 0.
U32 ethL1IFHistPMOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.41	Unsigned32	read-write	The count of OTU digital wrapper layer errored blocks.
DAT ethL1IFHistPMOTUEBTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.42	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored blocks value.
PMV ethL1IFHistPMOTUEBValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.43	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored blocks value.
INI ethL1IFHistPMOTUEBInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.44	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTUEBValue object to 0.
U32 ethL1IFHistPMOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.45	Unsigned32	read-write	The count of OTU digital wrapper layer background block errors.
DAT ethL1IFHistPMOTUBBETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.46	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer background block errors value.
PMV ethL1IFHistPMOTUBBEValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.47	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer background block errors value.
INI ethL1IFHistPMOTUBBEInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.48	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTUBBEValue object to 0.
U32 ethL1IFHistPMOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.49	Unsigned32	read-write	The count of OTU digital wrapper layer errored seconds.
DAT ethL1IFHistPMOTUESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.50	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer errored seconds value.
PMV ethL1IFHistPMOTUESValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.51	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer errored seconds value.
INI ethL1IFHistPMOTUESInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.52	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTUESValue object to 0.
U32 ethL1IFHistPMOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.53	Unsigned32	read-write	The count of OTU digital wrapper layer severely errored seconds.
DAT ethL1IFHistPMOTUSESTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.54	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer severely errored seconds value.
PMV ethL1IFHistPMOTUSESValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.55	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer severely errored seconds value.
INI ethL1IFHistPMOTUSESInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.56	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTUSESValue object to 0.
U32 ethL1IFHistPMOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.57	Unsigned32	read-write	The count of OTU digital wrapper layer out-of-frame seconds.
DAT ethL1IFHistPMOTUOFSTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.58	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer out-of-frame seconds value.
PMV ethL1IFHistPMOTUOFSValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.59	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer out-of-frame seconds value.
INI ethL1IFHistPMOTUOFSInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.60	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTUOFSValue object to 0.
U32 ethL1IFHistPMNBITCRValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.61	Unsigned32	read-write	The count of the number of bits corrected.
DAT ethL1IFHistPMNBITCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.62	DateAndTime	read-only	The date and time stamp of the number of bits corrected value.
PMV ethL1IFHistPMNBITCRValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.63	PMValidity	read-only	Indicates the validity of the provided number of bits corrected value.
INI ethL1IFHistPMNBITCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.64	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMNBITCRValue object to 0.
U32 ethL1IFHistPMNBYTCRValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.65	Unsigned32	read-write	The count of the number of bytes corrected. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ethL1IFHistPMNBYTCRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.66	DateAndTime	read-only	The date and time stamp of the number of bytes corrected value.
PMV ethL1IFHistPMNBYTCRValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.67	PMValidity	read-only	Indicates the validity of the provided number of bytes corrected value.
INI ethL1IFHistPMNBYTCRInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.68	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMNBYTCRValue object to 0.
U32 ethL1IFHistPMUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.69	Unsigned32	read-write	The count of uncorrectable codewords. This object applies only to OC-192 line port provisioned for OTN line mapping.
DAT ethL1IFHistPMUNCRCDWTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.70	DateAndTime	read-only	The date and time stamp of the uncorrectable codewords value.
PMV ethL1IFHistPMUNCRCDWValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.71	PMValidity	read-only	Indicates the validity of the provided uncorrectable codewords value.
INI ethL1IFHistPMUNCRCDWInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.72	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMUNCRCDWValue object to 0.
STR ethL1IFHistPMOTNBERValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.73	DisplayString	read-only	The instantaneous BER of the line port.
DAT ethL1IFHistPMOTNBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.74	DateAndTime	read-only	The date and time stamp of the instantaneous BER.
PMV ethL1IFHistPMOTNBERValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.75	PMValidity	read-only	Indicates the validity of the provided instantaneous BER.
INI ethL1IFHistPMOTNBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.76	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTNBERValue object to 0.
STR ethL1IFHistPMOTNAVGBERValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.77	DisplayString	read-only	The interval/average BER of the line port.
DAT ethL1IFHistPMOTNAVGBERTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.78	DateAndTime	read-only	The date and time stamp of the interval/average BER.
PMV ethL1IFHistPMOTNAVGBERValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.79	PMValidity	read-only	Indicates the validity of the provided interval/average BER.
INI ethL1IFHistPMOTNAVGBERInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.80	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTNAVGBERValue object to 0.
UNS ethL1IFHistPMNBITCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.81	Unsigned64	read-only	The 64-bit count of the number of bits corrected. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFHistPMNBITCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.82	DateAndTime	read-only	The date and time stamp of the 64-bit number of bits corrected value.
PMV ethL1IFHistPMNBITCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.83	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bits corrected value.
INI ethL1IFHistPMNBITCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.84	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMNBITCR64BitValue object to 0.
UNS ethL1IFHistPMNBYTCR64BitValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.85	Unsigned64	read-only	The 64-bit count of the number of bytes corrected. This object applies only to xGigE line ports provisioned for OTN line mapping with Forward Eror Correction (FEC).
DAT ethL1IFHistPMNBYTCR64BitTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.86	DateAndTime	read-only	The date and time stamp of the 64-bit number of bytes corrected value.
PMV ethL1IFHistPMNBYTCR64BitValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.87	PMValidity	read-only	Indicates the validity of the provided 64-bit number of bytes corrected value.
INI ethL1IFHistPMNBYTCR64BitInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.88	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMNBYTCR64BitValue object to 0.
U32 ethL1IFHistPMUASValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.89	Unsigned32	read-write	The count of unavailable seconds. This object is only available on Gigabit Ethernet ports.
DAT ethL1IFHistPMUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.90	DateAndTime	read-only	The date and time stamp of the unavailable seconds value.
PMV ethL1IFHistPMUASValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.91	PMValidity	read-only	Indicates the validity of the provided unavailable seconds value.
INI ethL1IFHistPMUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.92	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMUASValue object to 0.
U32 ethL1IFHistPMOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.93	Unsigned32	read-write	The count of OTU digital wrapper layer unavailable seconds.
DAT ethL1IFHistPMOTUUASTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.94	DateAndTime	read-only	The date and time stamp of the OTU digital wrapper layer unavailable seconds value.
PMV ethL1IFHistPMOTUUASValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.95	PMValidity	read-only	Indicates the validity of the provided OTU digital wrapper layer unavailable seconds value.
INI ethL1IFHistPMOTUUASInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.96	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOTUUASValue object to 0.
FIX ethL1IFHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.97	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT ethL1IFHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.98	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV ethL1IFHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.99	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI ethL1IFHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.100	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOPRMinValue object to 0.
FIX ethL1IFHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.101	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT ethL1IFHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.102	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV ethL1IFHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.103	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI ethL1IFHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.104	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOPRMaxValue object to 0.
FIX ethL1IFHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.105	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT ethL1IFHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.106	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV ethL1IFHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.107	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI ethL1IFHistPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.108	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOPRAvgValue object to 0.
FIX ethL1IFHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.109	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT ethL1IFHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.110	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV ethL1IFHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.111	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI ethL1IFHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.112	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOPTMinValue object to 0.
FIX ethL1IFHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.113	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT ethL1IFHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.114	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV ethL1IFHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.115	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI ethL1IFHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.116	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOPTMaxValue object to 0.
FIX ethL1IFHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.27.1.117	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT ethL1IFHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.27.1.118	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV ethL1IFHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.27.1.119	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI ethL1IFHistPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.27.1.120	InitializeCmd	read-write	Used to initialize the value of the ethL1IFHistPMOPTAvgValue object to 0.
ethL1IFPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.28		not-accessible	A table of threshold levels for performance monitoring counter values on Ethernet Layer 1 facilities, that are used in the generation of threshold crossing alerts.
ethL1IFPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.28.1		not-accessible	The row entry object of the Ethernet Layer 1 performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual Ethernet Layer 1 facility.
INT ethL1IFPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.28.1.1	INTEGER	not-accessible	The shelf number on which the Ethernet Layer 1 facility targeted for PM thresholds is provisioned.
INT ethL1IFPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.28.1.2	INTEGER	not-accessible	The slot number on which the Ethernet Layer 1 facility targeted for PM thresholds is provisioned.
PVX ethL1IFPMThresholdPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.28.1.3	PvxL1PortType	not-accessible	The type of Ethernet Layer 1 port targeted for PM thresholds.
INT ethL1IFPMThresholdPortIdx	1.3.6.1.4.1.18070.2.2.1.6.28.1.4	INTEGER	not-accessible	The number of the port of the identified type targeted for PM thresholds.
NUM ethL1IFPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.28.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
U32 ethL1IFPMThresholdCVValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.6	Unsigned32	read-write	The threshold for the count of 8B/10B coding violations. This object is only available on Gigabit Ethernet ports.
U32 ethL1IFPMThresholdINVBLKValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.7	Unsigned32	read-write	The threshold for the count of invalid blocks. This object is only available on 10 Gigabit Ethernet ports.
U32 ethL1IFPMThresholdESValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.8	Unsigned32	read-write	The threshold for the count of errored seconds.
U32 ethL1IFPMThresholdSESValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.9	Unsigned32	read-write	The threshold for the count of severely errored seconds.
U32 ethL1IFPMThresholdOTUEBValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.10	Unsigned32	read-write	The threshold for the count of errored blocks at the OTU digital wrapper layer.
U32 ethL1IFPMThresholdOTUBBEValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.11	Unsigned32	read-write	The threshold for the count of background block errors at the OTU digital wrapper layer.
U32 ethL1IFPMThresholdOTUESValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.12	Unsigned32	read-write	The threshold for the count of errored seconds at the OTU digital wrapper layer.
U32 ethL1IFPMThresholdOTUSESValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.13	Unsigned32	read-write	The threshold for the count of severely errored seconds at the OTU digital wrapper layer.
U32 ethL1IFPMThresholdOTUOFSValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.14	Unsigned32	read-write	The threshold for the count of out-of-frame seconds at the OTU digital wrapper layer.
U32 ethL1IFPMThresholdUNCRCDWValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.15	Unsigned32	read-write	The threshold for the count of uncorrectable codewords.
U32 ethL1IFPMThresholdUASValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.16	Unsigned32	read-write	The threshold for the count of unavailable seconds.
U32 ethL1IFPMThresholdOTUUASValue	1.3.6.1.4.1.18070.2.2.1.6.28.1.17	Unsigned32	read-write	The threshold for the count of unavailable seconds at the OTU digital wrapper layer.
pvxL2IFCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.29		not-accessible	A table of current performance monitoring statistics collected for the PacketVX Layer2 interfaces on the NE.
pvxL2IFCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.29.1		not-accessible	The row entry object of the PacketVX Layer 2 current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given PVX Layer 2 interface facility.
INT pvxL2IFCrntPMSwitchIdx	1.3.6.1.4.1.18070.2.2.1.6.29.1.1	INTEGER	not-accessible	The identifier of the ethernet switch instance on which the Layer 2 Interface facilitiy is provisioned.
INT pvxL2IFCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.29.1.2	INTEGER	not-accessible	The number of the shelf on which the PVX Layer2 IF targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
INT pvxL2IFCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.29.1.3	INTEGER	not-accessible	The number of the slot within which the PVX Layer2 IF targeted for PMs is provisioned. For LAG entities, the slot number is 0.
PVX pvxL2IFCrntPMPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.29.1.4	PvxPortType	not-accessible	The type of PacketVX port on which the Layer 2 Interface facility is provisioned.
INT pvxL2IFCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.29.1.5	INTEGER	not-accessible	The number of the port of the identified type on which the PVX Layer 2 IF facility targeted for PMs is provisioned.
NUM pvxL2IFCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.29.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
UNS pvxL2IFCrntPMTFRCRXValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.7	Unsigned64	read-only	The total received frame count receieved on the interface.
DAT pvxL2IFCrntPMTFRCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.8	DateAndTime	read-only	The date and time stamp of the total received frame count value.
PMV pvxL2IFCrntPMTFRCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.9	PMValidity	read-only	Indicates the validity of the provided total received frame count value.
INI pvxL2IFCrntPMTFRCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.10	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMTFRCRXValue object to 0.
UNS pvxL2IFCrntPMTFRCTXValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.11	Unsigned64	read-only	The total transmitted frame count on the interface.
DAT pvxL2IFCrntPMTFRCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.12	DateAndTime	read-only	The date and time stamp of the total transmitted frame count value.
PMV pvxL2IFCrntPMTFRCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.13	PMValidity	read-only	Indicates the validity of the provided total transmitted frame count value.
INI pvxL2IFCrntPMTFRCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.14	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMTFRCTXValue object to 0.
U32 pvxL2IFCrntPMFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.15	Unsigned32	read-write	The count of discarded frames on the interface.
DAT pvxL2IFCrntPMFRDRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.16	DateAndTime	read-only	The date and time stamp of the discarded frames value.
PMV pvxL2IFCrntPMFRDRValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.17	PMValidity	read-only	Indicates the validity of the provided discarded frames value.
INI pvxL2IFCrntPMFRDRInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.18	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMFRDRValue object to 0.
U32 pvxL2IFCrntPMFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.19	Unsigned32	read-write	The count of frame checksum errors on the interface.
DAT pvxL2IFCrntPMFCSETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.20	DateAndTime	read-only	The date and time stamp of the frame checksum errors value.
PMV pvxL2IFCrntPMFCSEValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.21	PMValidity	read-only	Indicates the validity of the provided frame checksum errors value.
INI pvxL2IFCrntPMFCSEInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.22	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMFCSEValue object to 0.
UNS pvxL2IFCrntPMTBYCRXValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.23	Unsigned64	read-only	The total received byte count on the interface.
DAT pvxL2IFCrntPMTBYCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.24	DateAndTime	read-only	The date and time stamp of the total received byte count value.
PMV pvxL2IFCrntPMTBYCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.25	PMValidity	read-only	Indicates the validity of the provided total received byte count value.
INI pvxL2IFCrntPMTBYCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.26	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMTBYCRXValue object to 0.
UNS pvxL2IFCrntPMTBYCTXValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.27	Unsigned64	read-only	The total transmitted byte count on the interface.
DAT pvxL2IFCrntPMTBYCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.28	DateAndTime	read-only	The date and time stamp of the total transmitted byte count value.
PMV pvxL2IFCrntPMTBYCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.29	PMValidity	read-only	Indicates the validity of the provided Ftotal transmitted byte count value.
INI pvxL2IFCrntPMTBYCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.30	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMTBYCTXValue object to 0.
UNS pvxL2IFCrntPMBCSTValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.31	Unsigned64	read-only	The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames.
DAT pvxL2IFCrntPMBCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.32	DateAndTime	read-only	The date and time stamp of the broadcast packets received count value.
PMV pvxL2IFCrntPMBCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.33	PMValidity	read-only	Indicates the validity of the provided broadcast packets received count value.
INI pvxL2IFCrntPMBCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.34	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMBCSTValue object to 0.
UNS pvxL2IFCrntPMMCSTValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.35	Unsigned64	read-only	The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
DAT pvxL2IFCrntPMMCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.36	DateAndTime	read-only	The date and time stamp of the multicast packets received count value.
PMV pvxL2IFCrntPMMCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.37	PMValidity	read-only	Indicates the validity of the provided multicast packets received count value.
INI pvxL2IFCrntPMMCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.38	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMMCSTValue object to 0.
UNS pvxL2IFCrntPMSIZE64Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.39	Unsigned64	read-only	The total number of 64 byte frames received (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZE64TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.40	DateAndTime	read-only	The date and time stamp of the count of 64-byte packets received.
PMV pvxL2IFCrntPMSIZE64Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.41	PMValidity	read-only	Indicates the validity of the provided count of 64-byte packets packets received.
INI pvxL2IFCrntPMSIZE64Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.42	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZE64Value object to 0.
UNS pvxL2IFCrntPMSIZE65To127Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.43	Unsigned64	read-only	The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZE65To127TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.44	DateAndTime	read-only	The date and time stamp of the count of packets between 65 and 127 bytes.
PMV pvxL2IFCrntPMSIZE65To127Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.45	PMValidity	read-only	Indicates the validity of the provided count of packets between 65 and 127 bytes.
INI pvxL2IFCrntPMSIZE65To127Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.46	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZE65To127Value object to 0.
UNS pvxL2IFCrntPMSIZE128To255Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.47	Unsigned64	read-only	The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZE128To255TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.48	DateAndTime	read-only	The date and time stamp of the count of packets between 128 and 255 bytes.
PMV pvxL2IFCrntPMSIZE128To255Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.49	PMValidity	read-only	Indicates the validity of the provided count of packets between 128 and 255 bytes.
INI pvxL2IFCrntPMSIZE128To255Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.50	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZE128To255Value object to 0.
UNS pvxL2IFCrntPMSIZE256To511Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.51	Unsigned64	read-only	The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZE256To511TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.52	DateAndTime	read-only	The date and time stamp of the count of packets between 256 and 511 bytes.
PMV pvxL2IFCrntPMSIZE256To511Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.53	PMValidity	read-only	Indicates the validity of the provided count of packets between 256 and 511 bytes.
INI pvxL2IFCrntPMSIZE256To511Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.54	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZE256To511Value object to 0.
UNS pvxL2IFCrntPMSIZE512To1023Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.55	Unsigned64	read-only	The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZE512To1023TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.56	DateAndTime	read-only	The date and time stamp of the count of packets between 512 and 1023 bytes.
PMV pvxL2IFCrntPMSIZE512To1023Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.57	PMValidity	read-only	Indicates the validity of the provided count of packets between 512 and 1023 bytes.
INI pvxL2IFCrntPMSIZE512To1023Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.58	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZE512To1023Value object to 0.
UNS pvxL2IFCrntPMSIZE1024To1518Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.59	Unsigned64	read-only	The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZE1024To1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.60	DateAndTime	read-only	The date and time stamp of the count of packets between 1024 and 1518 bytes.
PMV pvxL2IFCrntPMSIZE1024To1518Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.61	PMValidity	read-only	Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
INI pvxL2IFCrntPMSIZE1024To1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.62	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZE1024To1518Value object to 0.
UNS pvxL2IFCrntPMSIZEOver1518Value	1.3.6.1.4.1.18070.2.2.1.6.29.1.63	Unsigned64	read-only	The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets).
DAT pvxL2IFCrntPMSIZEOver1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.64	DateAndTime	read-only	The date and time stamp of the count of packets over 1518 bytes.
PMV pvxL2IFCrntPMSIZEOver1518Validity	1.3.6.1.4.1.18070.2.2.1.6.29.1.65	PMValidity	read-only	Indicates the validity of the provided count of packets over 1518 bytes.
INI pvxL2IFCrntPMSIZEOver1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.66	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMSIZEOver1518Value object to 0.
UNS pvxL2IFCrntPMTPFCRXValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.67	Unsigned64	read-only	The total received pause frame count on the interface.
DAT pvxL2IFCrntPMTPFCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.68	DateAndTime	read-only	The date and time stamp of the total received pause frame count value.
PMV pvxL2IFCrntPMTPFCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.69	PMValidity	read-only	Indicates the validity of the provided total received pause frame count value.
INI pvxL2IFCrntPMTPFCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.70	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMTPFCRXValue object to 0.
UNS pvxL2IFCrntPMTPFCTXValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.71	Unsigned64	read-only	The total transmitted pause frame count on the interface.
DAT pvxL2IFCrntPMTPFCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.72	DateAndTime	read-only	The date and time stamp of the total transmitted pause frame count value.
PMV pvxL2IFCrntPMTPFCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.73	PMValidity	read-only	Indicates the validity of the provided total transmitted pause frame count value.
INI pvxL2IFCrntPMTPFCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.74	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMTPFCTXValue object to 0.
U32 pvxL2IFCrntPMUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.75	Unsigned32	read-write	The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT pvxL2IFCrntPMUSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.76	DateAndTime	read-only	The date and time stamp of the count of undersized packets.
PMV pvxL2IFCrntPMUSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.77	PMValidity	read-only	Indicates the validity of the provided count of undersized packets.
INI pvxL2IFCrntPMUSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.78	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMUSIZEValue object to 0.
U32 pvxL2IFCrntPMOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.79	Unsigned32	read-write	The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT pvxL2IFCrntPMOSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.80	DateAndTime	read-only	The date and time stamp of the count of oversized packets.
PMV pvxL2IFCrntPMOSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.81	PMValidity	read-only	Indicates the validity of the provided count of oversized packets.
INI pvxL2IFCrntPMOSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.82	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMOSIZEValue object to 0.
U32 pvxL2IFCrntPMFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.29.1.83	Unsigned32	read-write	The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
DAT pvxL2IFCrntPMFRGTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.29.1.84	DateAndTime	read-only	The date and time stamp of the count of received packet fragments.
PMV pvxL2IFCrntPMFRGTValidity	1.3.6.1.4.1.18070.2.2.1.6.29.1.85	PMValidity	read-only	Indicates the validity of the provided count of received packet fragments.
INI pvxL2IFCrntPMFRGTInitialize	1.3.6.1.4.1.18070.2.2.1.6.29.1.86	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFCrntPMFRGTValue object to 0.
pvxL2IFHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.30		not-accessible	A table of historical performance monitoring statistics collected for the PacketVX Layer2 interfaces on the NE.
pvxL2IFHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.30.1		not-accessible	The row entry object of the PacketVX Layer 2 historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given PVX Layer 2 interface facility.
INT pvxL2IFHistPMSwitchIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.1	INTEGER	not-accessible	The identifier of the ethernet switch instance on which the Layer 2 Interface facilitiy is provisioned.
INT pvxL2IFHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.2	INTEGER	not-accessible	The number of the shelf on which the PVX Layer2 IF targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
INT pvxL2IFHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.3	INTEGER	not-accessible	The number of the slot within which the PVX Layer2 IF targeted for PMs is provisioned. For LAG entities, the slot number is 0.
PVX pvxL2IFHistPMPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.4	PvxPortType	not-accessible	The type of PacketVX port on which the Layer 2 Interface facility is provisioned.
INT pvxL2IFHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.5	INTEGER	not-accessible	The number of the port of the identified type on which the PVX Layer 2 IF facility targeted for PMs is provisioned.
NUM pvxL2IFHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT pvxL2IFHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.30.1.7	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
UNS pvxL2IFHistPMTFRCRXValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.8	Unsigned64	read-only	The total received frame count receieved on the interface.
DAT pvxL2IFHistPMTFRCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.9	DateAndTime	read-only	The date and time stamp of the total received frame count value.
PMV pvxL2IFHistPMTFRCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.10	PMValidity	read-only	Indicates the validity of the provided total received frame count value.
INI pvxL2IFHistPMTFRCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.11	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMTFRCRXValue object to 0.
UNS pvxL2IFHistPMTFRCTXValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.12	Unsigned64	read-only	The total transmitted frame count on the interface.
DAT pvxL2IFHistPMTFRCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.13	DateAndTime	read-only	The date and time stamp of the total transmitted frame count value.
PMV pvxL2IFHistPMTFRCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.14	PMValidity	read-only	Indicates the validity of the provided total transmitted frame count value.
INI pvxL2IFHistPMTFRCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.15	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMTFRCTXValue object to 0.
U32 pvxL2IFHistPMFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.16	Unsigned32	read-write	The count of discarded frames on the interface.
DAT pvxL2IFHistPMFRDRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.17	DateAndTime	read-only	The date and time stamp of the discarded frames value.
PMV pvxL2IFHistPMFRDRValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.18	PMValidity	read-only	Indicates the validity of the provided discarded frames value.
INI pvxL2IFHistPMFRDRInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.19	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMFRDRValue object to 0.
U32 pvxL2IFHistPMFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.20	Unsigned32	read-write	The count of frame checksum errors on the interface.
DAT pvxL2IFHistPMFCSETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.21	DateAndTime	read-only	The date and time stamp of the frame checksum errors value.
PMV pvxL2IFHistPMFCSEValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.22	PMValidity	read-only	Indicates the validity of the provided frame checksum errors value.
INI pvxL2IFHistPMFCSEInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.23	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMFCSEValue object to 0.
UNS pvxL2IFHistPMTBYCRXValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.24	Unsigned64	read-only	The total received byte count on the interface.
DAT pvxL2IFHistPMTBYCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.25	DateAndTime	read-only	The date and time stamp of the total received byte count value.
PMV pvxL2IFHistPMTBYCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.26	PMValidity	read-only	Indicates the validity of the provided total received byte count value.
INI pvxL2IFHistPMTBYCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.27	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMTBYCRXValue object to 0.
UNS pvxL2IFHistPMTBYCTXValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.28	Unsigned64	read-only	The total transmitted byte count on the interface.
DAT pvxL2IFHistPMTBYCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.29	DateAndTime	read-only	The date and time stamp of the total transmitted byte count value.
PMV pvxL2IFHistPMTBYCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.30	PMValidity	read-only	Indicates the validity of the provided Ftotal transmitted byte count value.
INI pvxL2IFHistPMTBYCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.31	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMTBYCTXValue object to 0.
UNS pvxL2IFHistPMBCSTValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.32	Unsigned64	read-only	The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames.
DAT pvxL2IFHistPMBCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.33	DateAndTime	read-only	The date and time stamp of the broadcast packets received count value.
PMV pvxL2IFHistPMBCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.34	PMValidity	read-only	Indicates the validity of the provided broadcast packets received count value.
INI pvxL2IFHistPMBCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.35	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMBCSTValue object to 0.
UNS pvxL2IFHistPMMCSTValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.36	Unsigned64	read-only	The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
DAT pvxL2IFHistPMMCSTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.37	DateAndTime	read-only	The date and time stamp of the multicast packets received count value.
PMV pvxL2IFHistPMMCSTValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.38	PMValidity	read-only	Indicates the validity of the provided multicast packets received count value.
INI pvxL2IFHistPMMCSTInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.39	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMMCSTValue object to 0.
UNS pvxL2IFHistPMSIZE64Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.40	Unsigned64	read-only	The total number of 64 byte frames received (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZE64TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.41	DateAndTime	read-only	The date and time stamp of the count of 64-byte packets received.
PMV pvxL2IFHistPMSIZE64Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.42	PMValidity	read-only	Indicates the validity of the provided count of 64-byte packets packets received.
INI pvxL2IFHistPMSIZE64Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.43	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZE64Value object to 0.
UNS pvxL2IFHistPMSIZE65To127Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.44	Unsigned64	read-only	The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZE65To127TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.45	DateAndTime	read-only	The date and time stamp of the count of packets between 65 and 127 bytes.
PMV pvxL2IFHistPMSIZE65To127Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.46	PMValidity	read-only	Indicates the validity of the provided count of packets between 65 and 127 bytes.
INI pvxL2IFHistPMSIZE65To127Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.47	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZE65To127Value object to 0.
UNS pvxL2IFHistPMSIZE128To255Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.48	Unsigned64	read-only	The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZE128To255TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.49	DateAndTime	read-only	The date and time stamp of the count of packets between 128 and 255 bytes.
PMV pvxL2IFHistPMSIZE128To255Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.50	PMValidity	read-only	Indicates the validity of the provided count of packets between 128 and 255 bytes.
INI pvxL2IFHistPMSIZE128To255Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.51	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZE128To255Value object to 0.
UNS pvxL2IFHistPMSIZE256To511Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.52	Unsigned64	read-only	The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZE256To511TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.53	DateAndTime	read-only	The date and time stamp of the count of packets between 256 and 511 bytes.
PMV pvxL2IFHistPMSIZE256To511Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.54	PMValidity	read-only	Indicates the validity of the provided count of packets between 256 and 511 bytes.
INI pvxL2IFHistPMSIZE256To511Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.55	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZE256To511Value object to 0.
UNS pvxL2IFHistPMSIZE512To1023Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.56	Unsigned64	read-only	The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZE512To1023TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.57	DateAndTime	read-only	The date and time stamp of the count of packets between 512 and 1023 bytes.
PMV pvxL2IFHistPMSIZE512To1023Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.58	PMValidity	read-only	Indicates the validity of the provided count of packets between 512 and 1023 bytes.
INI pvxL2IFHistPMSIZE512To1023Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.59	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZE512To1023Value object to 0.
UNS pvxL2IFHistPMSIZE1024To1518Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.60	Unsigned64	read-only	The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZE1024To1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.61	DateAndTime	read-only	The date and time stamp of the count of packets between 1024 and 1518 bytes.
PMV pvxL2IFHistPMSIZE1024To1518Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.62	PMValidity	read-only	Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
INI pvxL2IFHistPMSIZE1024To1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.63	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZE1024To1518Value object to 0.
UNS pvxL2IFHistPMSIZEOver1518Value	1.3.6.1.4.1.18070.2.2.1.6.30.1.64	Unsigned64	read-only	The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets).
DAT pvxL2IFHistPMSIZEOver1518TimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.65	DateAndTime	read-only	The date and time stamp of the count of packets over 1518 bytes.
PMV pvxL2IFHistPMSIZEOver1518Validity	1.3.6.1.4.1.18070.2.2.1.6.30.1.66	PMValidity	read-only	Indicates the validity of the provided count of packets over 1518 bytes.
INI pvxL2IFHistPMSIZEOver1518Initialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.67	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMSIZEOver1518Value object to 0.
UNS pvxL2IFHistPMTPFCRXValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.68	Unsigned64	read-only	The total received pause frame count on the interface.
DAT pvxL2IFHistPMTPFCRXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.69	DateAndTime	read-only	The date and time stamp of the total received pause frame count value.
PMV pvxL2IFHistPMTPFCRXValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.70	PMValidity	read-only	Indicates the validity of the provided total received pause frame count value.
INI pvxL2IFHistPMTPFCRXInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.71	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMTPFCRXValue object to 0.
UNS pvxL2IFHistPMTPFCTXValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.72	Unsigned64	read-only	The total transmitted pause frame count on the interface.
DAT pvxL2IFHistPMTPFCTXTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.73	DateAndTime	read-only	The date and time stamp of the total transmitted pause frame count value.
PMV pvxL2IFHistPMTPFCTXValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.74	PMValidity	read-only	Indicates the validity of the provided total transmitted pause frame count value.
INI pvxL2IFHistPMTPFCTXInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.75	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMTPFCTXValue object to 0.
U32 pvxL2IFHistPMUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.76	Unsigned32	read-write	The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT pvxL2IFHistPMUSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.77	DateAndTime	read-only	The date and time stamp of the count of undersized packets.
PMV pvxL2IFHistPMUSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.78	PMValidity	read-only	Indicates the validity of the provided count of undersized packets.
INI pvxL2IFHistPMUSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.79	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMUSIZEValue object to 0.
U32 pvxL2IFHistPMOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.80	Unsigned32	read-write	The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
DAT pvxL2IFHistPMOSIZETimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.81	DateAndTime	read-only	The date and time stamp of the count of oversized packets.
PMV pvxL2IFHistPMOSIZEValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.82	PMValidity	read-only	Indicates the validity of the provided count of oversized packets.
INI pvxL2IFHistPMOSIZEInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.83	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMOSIZEValue object to 0.
U32 pvxL2IFHistPMFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.30.1.84	Unsigned32	read-write	The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
DAT pvxL2IFHistPMFRGTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.30.1.85	DateAndTime	read-only	The date and time stamp of the count of received packet fragments.
PMV pvxL2IFHistPMFRGTValidity	1.3.6.1.4.1.18070.2.2.1.6.30.1.86	PMValidity	read-only	Indicates the validity of the provided count of received packet fragments.
INI pvxL2IFHistPMFRGTInitialize	1.3.6.1.4.1.18070.2.2.1.6.30.1.87	InitializeCmd	read-write	Used to initialize the value of the pvxL2IFHistPMFRGTValue object to 0.
pvxL2IFPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.6.31		not-accessible	A table of threshold levels for performance monitoring counter values on PVX Layer 2 IF facilities, that are used in the generation of threshold crossing alerts.
pvxL2IFPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.6.31.1		not-accessible	The row entry object of the PacketVX Layer 2 Interface performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual PVX Layer 2 IF facility.
INT pvxL2IFPMThresholdSwitchIdx	1.3.6.1.4.1.18070.2.2.1.6.31.1.1	INTEGER	not-accessible	The identifier of the ethernet switch instance on which the Layer 2 Interface facilitiy is provisioned.
INT pvxL2IFPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.31.1.2	INTEGER	not-accessible	The number of the shelf on which the PVX Layer2 IF targeted for PM thresholds is provisioned. For LAG entities, the shelf number is 0.
INT pvxL2IFPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.31.1.3	INTEGER	not-accessible	The number of the slot within which the PVX Layer2 IF targeted for PM thresholds is provisioned. For LAG entities, the slot number is 0.
PVX pvxL2IFPMThresholdPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.31.1.4	PvxPortType	not-accessible	The type of PacketVX port on which the Layer 2 Interface facility is provisioned.
INT pvxL2IFPMThresholdPortIdx	1.3.6.1.4.1.18070.2.2.1.6.31.1.5	INTEGER	not-accessible	The number of the port of the identified type on which the PVX Layer 2 IF facility targeted for PM thresholds is provisioned.
NUM pvxL2IFPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.31.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
U32 pvxL2IFPMThresholdFRDRValue	1.3.6.1.4.1.18070.2.2.1.6.31.1.7	Unsigned32	read-write	The threshold for the count of discarded frames on the interface.
U32 pvxL2IFPMThresholdFCSEValue	1.3.6.1.4.1.18070.2.2.1.6.31.1.8	Unsigned32	read-write	The threshold for the count of frame checksum errors on the interface.
U32 pvxL2IFPMThresholdUSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.31.1.9	Unsigned32	read-write	The threshold for the count of undersized frames.
U32 pvxL2IFPMThresholdOSIZEValue	1.3.6.1.4.1.18070.2.2.1.6.31.1.10	Unsigned32	read-write	The threshold for the count of oversized frames.
U32 pvxL2IFPMThresholdFRGTValue	1.3.6.1.4.1.18070.2.2.1.6.31.1.11	Unsigned32	read-write	The threshold for the count of fragmented frames.
briCrntPMTable	1.3.6.1.4.1.18070.2.2.1.6.38		not-accessible	A table of current performance monitoring statistics collected for the Bit Rate Independent (BRI) facilities on the NE.
briCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.6.38.1		not-accessible	The row entry object of the BRI current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given BRI facility.
INT briCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.38.1.1	INTEGER	not-accessible	The number of the shelf on which the BRI facility targeted for PMs is provisioned.
INT briCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.38.1.2	INTEGER	not-accessible	The number of the slot within which the BRI facility targeted for PMs is provisioned.
INT briCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.38.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the BRI facility targeted for PMs is provisioned.
NUM briCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.38.1.4	PMIntervalType	not-accessible	The type of BRI bin according to interval length.
FIX briCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.5	FixedX10	read-only	The optical power received on the input of the BRI facility port.
DAT briCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.6	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV briCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.7	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX briCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.8	FixedX10	read-only	The optical power transmitted at the output of the BRI facility port.
DAT briCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.9	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV briCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.10	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT briCrntPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.11	INTEGER	read-only	The temperature measured on the BRI facility port.
DAT briCrntPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.12	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV briCrntPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.13	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX briCrntPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.14	FixedX10	read-only	The supply voltage measured on the BRI facility port.
DAT briCrntPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.15	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV briCrntPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.16	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT briCrntPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.17	INTEGER	read-only	The laser bias current measured on the BRI facility port.
DAT briCrntPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.18	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV briCrntPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.19	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
FIX briCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.20	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT briCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.21	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV briCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.22	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI briCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.38.1.23	InitializeCmd	read-write	Used to initialize the value of the briCrntPMOPRMinValue object to 0.
FIX briCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.24	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT briCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.25	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV briCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.26	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI briCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.38.1.27	InitializeCmd	read-write	Used to initialize the value of the briCrntPMOPRMaxValue object to 0.
FIX briCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.28	FixedX10	read-only	The average optical power received on the input of the transceiver.
DAT briCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.29	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV briCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.30	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
INI briCrntPMOPRAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.38.1.31	InitializeCmd	read-write	Used to initialize the value of the briCrntPMOPRAvgValue object to 0.
FIX briCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.32	FixedX10	read-only	The minimum optical power transmitted at the output of the transceiver.
DAT briCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.33	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV briCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.34	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
INI briCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.38.1.35	InitializeCmd	read-write	Used to initialize the value of the briCrntPMOPTMinValue object to 0.
FIX briCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.36	FixedX10	read-only	The maximum optical power transmitted at the output of the transceiver.
DAT briCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.37	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV briCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.38	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
INI briCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.38.1.39	InitializeCmd	read-write	Used to initialize the value of the briCrntPMOPTMaxValue object to 0.
FIX briCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.6.38.1.40	FixedX10	read-only	The average optical power transmitted at the output of the transceiver.
DAT briCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.38.1.41	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV briCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.6.38.1.42	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
INI briCrntPMOPTAvgInitialize	1.3.6.1.4.1.18070.2.2.1.6.38.1.43	InitializeCmd	read-write	Used to initialize the value of the briCrntPMOPTAvgValue object to 0.
briHistPMTable	1.3.6.1.4.1.18070.2.2.1.6.39		not-accessible	A table of historical performance monitoring statistics collected for the Bit Rate Independent (BRI) facilities on the NE.
briHistPMEntry	1.3.6.1.4.1.18070.2.2.1.6.39.1		not-accessible	The row entry object of the BRI historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given BRI facility.
INT briHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.6.39.1.1	INTEGER	not-accessible	The number of the shelf on which the BRI facility targeted for PMs is provisioned.
INT briHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.6.39.1.2	INTEGER	not-accessible	The number of the slot within which the BRI facility targeted for PMs is provisioned.
INT briHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.6.39.1.3	INTEGER	not-accessible	The number of the port on the circuit pack on which the BRI facility targeted for PMs is provisioned.
NUM briHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.6.39.1.4	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT briHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.6.39.1.5	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
FIX briHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.6	FixedX10	read-only	The optical power received on the input of the BRI facility port.
DAT briHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV briHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX briHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.9	FixedX10	read-only	The optical power transmitted at the output of the BRI facility port.
DAT briHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV briHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
INT briHistPMTempValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.12	INTEGER	read-only	The temperature measured on the BRI facility port.
DAT briHistPMTempTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.13	DateAndTime	read-only	The date and time stamp of the temperature value.
PMV briHistPMTempValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.14	PMValidity	read-only	Indicates the validity of the provided temperature value.
FIX briHistPMSupplyVoltageValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.15	FixedX10	read-only	The supply voltage measured on the BRI facility port.
DAT briHistPMSupplyVoltageTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.16	DateAndTime	read-only	The date and time stamp of the supply voltage value.
PMV briHistPMSupplyVoltageValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.17	PMValidity	read-only	Indicates the validity of the provided supply voltage value.
INT briHistPMLBCValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.18	INTEGER	read-only	The laser bias current measured on the BRI facility port.
DAT briHistPMLBCTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.19	DateAndTime	read-only	The date and time stamp of the laser bias current value.
PMV briHistPMLBCValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.20	PMValidity	read-only	Indicates the validity of the provided laser bias current value.
FIX briHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.21	FixedX10	read-only	The minimum optical power received on the input of the transceiver.
DAT briHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.22	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV briHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.23	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
INI briHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.6.39.1.24	InitializeCmd	read-write	Used to initialize the value of the briHistPMOPRMinValue object to 0.
FIX briHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.6.39.1.25	FixedX10	read-only	The maximum optical power received on the input of the transceiver.
DAT briHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.6.39.1.26	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV briHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.6.39.1.27	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
INI briHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.6.39.1.28	InitializeCmd	read-write	Used to initialize the value of the briHistPMOPRMaxValue object to 0.

RFC description

A BTI Systems MIB providing comprehensive SNMP management objects for the BTI 7000 series telecommunications equipment, including configuration, monitoring, inventory, and operational control of network elements and synchronization functions.

Start monitoring BTI Systems optical transport devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BTI-7000-MIB