CIENA-WS-PTP-MIB

All MIBs › CIENA-WS-PTP-MIB

Organization: Ciena Corporation

Last Updated: 2017-08-07

Category: Optical and WDM, Vendor: Ciena

Description: Manages IEEE 1588 PTP and coherent modem parameters on Ciena WaveServer line ports.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-WS-PTP-MIB?

CIENA-WS-PTP-MIB models the Physical Termination Points (PTPs)—the physical signal-terminating ports/interfaces—on Ciena's WaveServer optical transport platform, covering IEEE 1588 Precision Time Protocol synchronization and coherent modem line-port parameters. It exposes tables identifying each PTP, its ID/name, and its administrative and operational state. Monitoring-wise it is used to confirm the operational status of physical optical line ports and their PTP timing state—an operator checks the PTP operational state to see whether a port is up, degraded, or down, a direct hardware-status indicator for the coherent transport interface. Because PTPs are automatically provisioned by the system, this module builds on a base physical-inventory model shared across other Ciena WaveServer MIBs (alarm and notification modules reference the same PTP instances). It is deployed in carrier/metro DWDM optical transport networks running Ciena WaveServer platforms, particularly where synchronization (PTP/1588) accuracy matters for the coherent modem line. Engineers can download the CIENA-WS-PTP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-WS-PTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena WaveServer optical transport platforms

Monitoring Examples

An admin polls cwsPtpPtpStateTable/Entry (via cwsPtpPtpStateTableSnmpKey) to check cwsPtpPtpStateAdminState against cwsPtpPtpStateOperationalState for a given cwsPtpPtpsPtpIndex, cross-referencing cwsPtpPtpIdName from cwsPtpPtpIdTable to identify the physical port. An operational state that drops to down or degraded while the admin state remains "enabled" would flag a physical-layer fault on that line port—for example a failed coherent modem or fiber issue—warranting correlation with the alarm MIB.

What Can Be Monitored

physical termination point (PTP) identity/name
PTP administrative state
PTP operational state
PTP index/key mapping

Imported Objects

From CIENA-WS-MIB

cienaWsConfig

OBJECT-IDENTITY

From CIENA-WS-TYPEDEFS-MIB

ChannelsNumber
Decimal1Dig
Decimal2Dig
Decimal2DigSmall
EnabledDisabledEnum
EnabledDisabledNaEnum
NameString
PtpId
StringMaxl15
StringMaxl32
TraceMismatchFailMode
TraceMismatchMode
TraceTxOperMode
XcvrId
XcvrType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaWsPtpMIB	1.3.6.1.4.1.1271.3.4.8			Physical Termination Point. This module models the physical characteristics of the signal. This base module contains generic definitions for all PTPs. Specific characteristics of PTPs can augment this model to provide more detail. PTPs are automatically provisioned by the system.
cienaWsPtpObjects	1.3.6.1.4.1.1271.3.4.8.1
cienaWsPtpConformance	1.3.6.1.4.1.1271.3.4.8.2
cienaWsPtpGroups	1.3.6.1.4.1.1271.3.4.8.2.1
cienaWsPtpGroup	1.3.6.1.4.1.1271.3.4.8.2.1.1			Conformance Group
cienaWsPtpCompliances	1.3.6.1.4.1.1271.3.4.8.2.2
cienaWsPtpCompliance	1.3.6.1.4.1.1271.3.4.8.2.2.1			Compliance
cwsPtpPtpsTable	1.3.6.1.4.1.1271.3.4.8.3		not-accessible	None
cwsPtpPtpsEntry	1.3.6.1.4.1.1271.3.4.8.3.1		not-accessible	Entry for cwsPtpPtpsTable.
I32 cwsPtpPtpsPtpIndex	1.3.6.1.4.1.1271.3.4.8.3.1.1	Integer32	read-only	Unique, index of the PTP. Key value for the PTP list. Read-only attribute.
cwsPtpPtpIdTable	1.3.6.1.4.1.1271.3.4.8.4		not-accessible	Identification information of this PTP instance.
cwsPtpPtpIdEntry	1.3.6.1.4.1.1271.3.4.8.4.1		not-accessible	Entry for cwsPtpPtpIdTable.
I32 cwsPtpPtpIdTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.4.1.1	Integer32	not-accessible	Unique key for cwsPtpPtpId
STR cwsPtpPtpIdName	1.3.6.1.4.1.1271.3.4.8.4.1.2	NameString	read-only	Name of the ptp instance. Read only attribute.
cwsPtpPtpStateTable	1.3.6.1.4.1.1271.3.4.8.5		not-accessible	State information of this PTP instance.
cwsPtpPtpStateEntry	1.3.6.1.4.1.1271.3.4.8.5.1		not-accessible	Entry for cwsPtpPtpStateTable.
I32 cwsPtpPtpStateTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.5.1.1	Integer32	not-accessible	Unique key for cwsPtpPtpState
ENA cwsPtpPtpStateAdminState	1.3.6.1.4.1.1271.3.4.8.5.1.2	EnabledDisabledEnum	read-write	Administrative state (enabled or disabled) of the PTP. If Admin State is set to enabled, majority of the ptp fields will no longer be modifiable. When PTP Transmitter State is Disabled, PTP Admin State cannot be changed from Disabled to Enabled.
PTP cwsPtpPtpStateOperationalState	1.3.6.1.4.1.1271.3.4.8.5.1.3	PtpOpEnum	read-only	Operational state of the ptp. Read-only attribute.
ENA cwsPtpPtpStateSpliManagement	1.3.6.1.4.1.1271.3.4.8.5.1.4	EnabledDisabledEnum	read-write	SPLI enabled or disabled state on the PTP.
cwsPtpPtpPropertiesTable	1.3.6.1.4.1.1271.3.4.8.6		not-accessible	All the configurable and operational data of this PTP instance.
cwsPtpPtpPropertiesEntry	1.3.6.1.4.1.1271.3.4.8.6.1		not-accessible	Entry for cwsPtpPtpPropertiesTable.
I32 cwsPtpPtpPropertiesTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.6.1.1	Integer32	not-accessible	Unique key for cwsPtpPtpProperties
XCV cwsPtpPtpPropertiesXcvrType	1.3.6.1.4.1.1271.3.4.8.6.1.2	XcvrType	read-write	Transceiver type of the xcvr that's associated with this ptp. Type depends on what is physically plugged in. Read only attribute.
XCV cwsPtpPtpPropertiesParentIndex	1.3.6.1.4.1.1271.3.4.8.6.1.3	XcvrId	read-only	Index of the transceiver (XCVR) associated with the PTP. Read-only attribute.
INT cwsPtpPtpPropertiesRate	1.3.6.1.4.1.1271.3.4.8.6.1.4	INTEGER	read-only	The Line Rate value, based off the mode of the parent XCVR.
cwsPtpTransmitterTable	1.3.6.1.4.1.1271.3.4.8.7		not-accessible	PTP transmitter related config and operational data fields.
cwsPtpTransmitterEntry	1.3.6.1.4.1.1271.3.4.8.7.1		not-accessible	Entry for cwsPtpTransmitterTable.
I32 cwsPtpTransmitterTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.7.1.1	Integer32	not-accessible	Unique key for cwsPtpTransmitter
ENA cwsPtpTransmitterState	1.3.6.1.4.1.1271.3.4.8.7.1.2	EnabledDisabledNaEnum	read-only	Transmitter state (enabled or disabled) of the PTP. PTP Admin State cannot be changed to enabled unless transmitter-state is enabled.
cwsPtpWavelengthTable	1.3.6.1.4.1.1271.3.4.8.8		not-accessible	None
cwsPtpWavelengthEntry	1.3.6.1.4.1.1271.3.4.8.8.1		not-accessible	Entry for cwsPtpWavelengthTable.
I32 cwsPtpWavelengthTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.8.1.1	Integer32	not-accessible	Unique key for cwsPtpWavelength
DEC cwsPtpWavelengthValue	1.3.6.1.4.1.1271.3.4.8.8.1.2	Decimal2Dig	read-write	Wavelength value setting of the ptp, in nm. This is the configured wavelength value. Wavelength value cannot be modified while Admin State is set to enabled, except when changing from zero value to another value. It also cannot be modified if the PTP XCVR type is not a modem. Wavelength cannot be modified in the same operation as Frequency, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Wavelength is modified, Frequency and Channel will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. In the case of automatic wavelength assignment, if Member ID = n, Port 1 PTP Channel = (n * 2 - 1), P12 PTP Channel = (n * 2). If PTP Wavelength, Frequency, and Channel have non-zero values, automatic wavelength assignment shall be skipped. If user provisions a Member ID that exceeds the maximum wavelength allocation specified in selected Band Plan (e.g. setting Member ID to 45 with Fixed-88 plan), automatic wavelength assignment shall be skipped.
DEC cwsPtpWavelengthMinValue	1.3.6.1.4.1.1271.3.4.8.8.1.3	Decimal2DigSmall	read-only	The Wavelength Min value.
DEC cwsPtpWavelengthMaxValue	1.3.6.1.4.1.1271.3.4.8.8.1.4	Decimal2DigSmall	read-only	The Wavelength Max Value.
DEC cwsPtpWavelengthActual	1.3.6.1.4.1.1271.3.4.8.8.1.5	Decimal2Dig	read-only	The actual wavelength value of the ptp. in nm. It may or may not be equal to the configurable 'wavelength/value'.
cwsPtpChannelsTable	1.3.6.1.4.1.1271.3.4.8.9		not-accessible	PTP channels related operational data fields.
cwsPtpChannelsEntry	1.3.6.1.4.1.1271.3.4.8.9.1		not-accessible	Entry for cwsPtpChannelsTable.
I32 cwsPtpChannelsTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.9.1.1	Integer32	not-accessible	Unique key for cwsPtpChannels
CHA cwsPtpChannelsNumberOfChannels	1.3.6.1.4.1.1271.3.4.8.9.1.2	ChannelsNumber	read-only	Number of channels this PTP has.
cwsPtpChannelTable	1.3.6.1.4.1.1271.3.4.8.10		not-accessible	Operational data of a specific PTP channel.
cwsPtpChannelEntry	1.3.6.1.4.1.1271.3.4.8.10.1		not-accessible	Entry for cwsPtpChannelTable.
I32 cwsPtpChannelChannelNumber	1.3.6.1.4.1.1271.3.4.8.10.1.1	Integer32	read-only	Channel number of the channel status.
cwsPtpRxPowerTable	1.3.6.1.4.1.1271.3.4.8.11		not-accessible	None
cwsPtpRxPowerEntry	1.3.6.1.4.1.1271.3.4.8.11.1		not-accessible	Entry for cwsPtpRxPowerTable.
I32 cwsPtpRxPowerTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.11.1.1	Integer32	not-accessible	Unique key for cwsPtpRxPower
DEC cwsXcvrRxPowerActual	1.3.6.1.4.1.1271.3.4.8.11.1.2	Decimal1Dig	read-only	Actual Tx or Rx optical power in dBm.
DEC cwsXcvrRxPowerMaximum	1.3.6.1.4.1.1271.3.4.8.11.1.3	Decimal1Dig	read-only	Maximum Tx or Rx optical power in dBm.
DEC cwsXcvrRxPowerMinimum	1.3.6.1.4.1.1271.3.4.8.11.1.4	Decimal1Dig	read-only	Minimum Tx or Rx optical power in dBm.
STR cwsXcvrRxPowerMaximumRecordedTime	1.3.6.1.4.1.1271.3.4.8.11.1.5	StringMaxl32	read-only	The exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string.
STR cwsXcvrRxPowerMinimumRecordedTime	1.3.6.1.4.1.1271.3.4.8.11.1.6	StringMaxl32	read-only	The exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string.
cwsPtpRxStatusTable	1.3.6.1.4.1.1271.3.4.8.12		not-accessible	None
cwsPtpRxStatusEntry	1.3.6.1.4.1.1271.3.4.8.12.1		not-accessible	Entry for cwsPtpRxStatusTable.
I32 cwsPtpRxStatusTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.12.1.1	Integer32	not-accessible	Unique key for cwsPtpRxStatus
T/F cwsXcvrRxStatusHighAlarmStatus	1.3.6.1.4.1.1271.3.4.8.12.1.2	TruthValue	read-only	Optical power high alarm status, boolean, true if alarm is raised, false if alarm is not raised.
T/F cwsXcvrRxStatusLowAlarmStatus	1.3.6.1.4.1.1271.3.4.8.12.1.3	TruthValue	read-only	Optical power low alarm status, boolean, true if alarm is raised, false if alarm is not raised.
T/F cwsXcvrRxStatusHighWarningStatus	1.3.6.1.4.1.1271.3.4.8.12.1.4	TruthValue	read-only	Optical power high warning status, boolean, true if warning is raised, false if warning is not raised.
T/F cwsXcvrRxStatusLowWarningStatus	1.3.6.1.4.1.1271.3.4.8.12.1.5	TruthValue	read-only	Optical power low warning status, boolean, true if warning is raised, false if warning is not raised.
T/F cwsPtpRxStatusLossOfSignal	1.3.6.1.4.1.1271.3.4.8.12.1.6	TruthValue	read-only	Rx Loss of Signal.
T/F cwsPtpRxStatusLossOfLock	1.3.6.1.4.1.1271.3.4.8.12.1.7	TruthValue	read-only	Rx Loss of Lock.
cwsPtpTxPowerTable	1.3.6.1.4.1.1271.3.4.8.13		not-accessible	None
cwsPtpTxPowerEntry	1.3.6.1.4.1.1271.3.4.8.13.1		not-accessible	Entry for cwsPtpTxPowerTable.
I32 cwsPtpTxPowerTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.13.1.1	Integer32	not-accessible	Unique key for cwsPtpTxPower
DEC cwsXcvrTxPowerActual	1.3.6.1.4.1.1271.3.4.8.13.1.2	Decimal1Dig	read-only	Actual Tx or Rx optical power in dBm.
DEC cwsXcvrTxPowerMaximum	1.3.6.1.4.1.1271.3.4.8.13.1.3	Decimal1Dig	read-only	Maximum Tx or Rx optical power in dBm.
DEC cwsXcvrTxPowerMinimum	1.3.6.1.4.1.1271.3.4.8.13.1.4	Decimal1Dig	read-only	Minimum Tx or Rx optical power in dBm.
STR cwsXcvrTxPowerMaximumRecordedTime	1.3.6.1.4.1.1271.3.4.8.13.1.5	StringMaxl32	read-only	The exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string.
STR cwsXcvrTxPowerMinimumRecordedTime	1.3.6.1.4.1.1271.3.4.8.13.1.6	StringMaxl32	read-only	The exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string.
cwsPtpTxStatusTable	1.3.6.1.4.1.1271.3.4.8.14		not-accessible	None
cwsPtpTxStatusEntry	1.3.6.1.4.1.1271.3.4.8.14.1		not-accessible	Entry for cwsPtpTxStatusTable.
I32 cwsPtpTxStatusTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.14.1.1	Integer32	not-accessible	Unique key for cwsPtpTxStatus
T/F cwsXcvrTxStatusHighAlarmStatus	1.3.6.1.4.1.1271.3.4.8.14.1.2	TruthValue	read-only	Optical power high alarm status, boolean, true if alarm is raised, false if alarm is not raised.
T/F cwsXcvrTxStatusLowAlarmStatus	1.3.6.1.4.1.1271.3.4.8.14.1.3	TruthValue	read-only	Optical power low alarm status, boolean, true if alarm is raised, false if alarm is not raised.
T/F cwsXcvrTxStatusHighWarningStatus	1.3.6.1.4.1.1271.3.4.8.14.1.4	TruthValue	read-only	Optical power high warning status, boolean, true if warning is raised, false if warning is not raised.
T/F cwsXcvrTxStatusLowWarningStatus	1.3.6.1.4.1.1271.3.4.8.14.1.5	TruthValue	read-only	Optical power low warning status, boolean, true if warning is raised, false if warning is not raised.
cwsPtpDiagnosticsTable	1.3.6.1.4.1.1271.3.4.8.15		not-accessible	None
cwsPtpDiagnosticsEntry	1.3.6.1.4.1.1271.3.4.8.15.1		not-accessible	Entry for cwsPtpDiagnosticsTable.
I32 cwsPtpDiagnosticsTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.15.1.1	Integer32	not-accessible	Unique key for cwsPtpDiagnostics
CHA cwsPtpDiagnosticsNumberOfChannels	1.3.6.1.4.1.1271.3.4.8.15.1.2	ChannelsNumber	read-only	Number of channels the PTP has.
U32 cwsPtpDiagnosticsNumberOfEthernet	1.3.6.1.4.1.1271.3.4.8.15.1.3	Unsigned32	read-only	Number of Ethernet connections the PTP has.
cwsPtpPtpOpticalDiagnosticsTable	1.3.6.1.4.1.1271.3.4.8.16		not-accessible	None
cwsPtpPtpOpticalDiagnosticsEntry	1.3.6.1.4.1.1271.3.4.8.16.1		not-accessible	Entry for cwsPtpPtpOpticalDiagnosticsTable.
I32 cwsPtpPtpOpticalDiagnosticsChannelNumber	1.3.6.1.4.1.1271.3.4.8.16.1.1	Integer32	read-only	Channel number of the physical diagnostic status.
cwsPtpPtpRxOpticalDiagnosticsTable	1.3.6.1.4.1.1271.3.4.8.17		not-accessible	None
cwsPtpPtpRxOpticalDiagnosticsEntry	1.3.6.1.4.1.1271.3.4.8.17.1		not-accessible	Entry for cwsPtpPtpRxOpticalDiagnosticsTable.
I32 cwsPtpPtpRxOpticalDiagnosticsTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.17.1.1	Integer32	not-accessible	Unique key for cwsPtpPtpRxOpticalDiagnostics
T/F cwsPtpPtpRxOpticalDiagnosticsLossOfSignal	1.3.6.1.4.1.1271.3.4.8.17.1.2	TruthValue	read-only	Rx Loss of Signal.
T/F cwsPtpPtpRxOpticalDiagnosticsLossOfLock	1.3.6.1.4.1.1271.3.4.8.17.1.3	TruthValue	read-only	Rx CDR Loss of Lock.
cwsPtpPtpTxOpticalDiagnosticsTable	1.3.6.1.4.1.1271.3.4.8.18		not-accessible	None
cwsPtpPtpTxOpticalDiagnosticsEntry	1.3.6.1.4.1.1271.3.4.8.18.1		not-accessible	Entry for cwsPtpPtpTxOpticalDiagnosticsTable.
I32 cwsPtpPtpTxOpticalDiagnosticsTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.18.1.1	Integer32	not-accessible	Unique key for cwsPtpPtpTxOpticalDiagnostics
T/F cwsPtpPtpTxOpticalDiagnosticsLossOfSignal	1.3.6.1.4.1.1271.3.4.8.18.1.2	TruthValue	read-only	Tx Loss of Signal.
T/F cwsPtpPtpTxOpticalDiagnosticsLossOfLock	1.3.6.1.4.1.1271.3.4.8.18.1.3	TruthValue	read-only	Tx Loss of Lock.
cwsPtpPtpEthernetDiagnosticsTable	1.3.6.1.4.1.1271.3.4.8.19		not-accessible	None
cwsPtpPtpEthernetDiagnosticsEntry	1.3.6.1.4.1.1271.3.4.8.19.1		not-accessible	Entry for cwsPtpPtpEthernetDiagnosticsTable.
I32 cwsPtpPtpEthernetDiagnosticsEthernetId	1.3.6.1.4.1.1271.3.4.8.19.1.1	Integer32	read-only	Ethernet Connection Id.
cwsPtpPmaTable	1.3.6.1.4.1.1271.3.4.8.20		not-accessible	None
cwsPtpPmaEntry	1.3.6.1.4.1.1271.3.4.8.20.1		not-accessible	Entry for cwsPtpPmaTable.
I32 cwsPtpPmaTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.20.1.1	Integer32	not-accessible	Unique key for cwsPtpPma
T/F cwsPtpPmaSerdesOutOfLock	1.3.6.1.4.1.1271.3.4.8.20.1.2	TruthValue	read-only	Display true if the serializer/deserializer, on a given lane (1 for 10GE, 4 for 40GE and 20 for 100GE), is unable to lock to the incoming signal. Display false otherwise.
cwsPtpFecTable	1.3.6.1.4.1.1271.3.4.8.21		not-accessible	None
cwsPtpFecEntry	1.3.6.1.4.1.1271.3.4.8.21.1		not-accessible	Entry for cwsPtpFecTable.
I32 cwsPtpFecTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.21.1.1	Integer32	not-accessible	Unique key for cwsPtpFec
T/F cwsPtpFecLossOfAlignmentMarkerLock	1.3.6.1.4.1.1271.3.4.8.21.1.2	TruthValue	read-only	Loss of Alignment Marker lock.
cwsPtpPcsTable	1.3.6.1.4.1.1271.3.4.8.22		not-accessible	None
cwsPtpPcsEntry	1.3.6.1.4.1.1271.3.4.8.22.1		not-accessible	Entry for cwsPtpPcsTable.
I32 cwsPtpPcsTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.22.1.1	Integer32	not-accessible	Unique key for cwsPtpPcs
T/F cwsPtpPcsLossOfAlignmentMarker	1.3.6.1.4.1.1271.3.4.8.22.1.2	TruthValue	read-only	Loss of Alignment Marker.
T/F cwsPtpPcsLossOfBlockLock	1.3.6.1.4.1.1271.3.4.8.22.1.3	TruthValue	read-only	Loss of Block Lock.
T/F cwsPtpPcsHighBitErrorRate	1.3.6.1.4.1.1271.3.4.8.22.1.4	TruthValue	read-only	High bit error rate.
cwsPtpRsTable	1.3.6.1.4.1.1271.3.4.8.23		not-accessible	None
cwsPtpRsEntry	1.3.6.1.4.1.1271.3.4.8.23.1		not-accessible	Entry for cwsPtpRsTable.
I32 cwsPtpRsTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.23.1.1	Integer32	not-accessible	Unique key for cwsPtpRs
T/F cwsPtpRsLinkDown	1.3.6.1.4.1.1271.3.4.8.23.1.2	TruthValue	read-only	Link Down.
T/F cwsPtpRsLocalFault	1.3.6.1.4.1.1271.3.4.8.23.1.3	TruthValue	read-only	Local Fault.
T/F cwsPtpRsRemoteFault	1.3.6.1.4.1.1271.3.4.8.23.1.4	TruthValue	read-only	Remote Fault.
cwsPtpTraceTable	1.3.6.1.4.1.1271.3.4.8.24		not-accessible	None
cwsPtpTraceEntry	1.3.6.1.4.1.1271.3.4.8.24.1		not-accessible	Entry for cwsPtpTraceTable.
I32 cwsPtpTraceTableSnmpKey	1.3.6.1.4.1.1271.3.4.8.24.1.1	Integer32	not-accessible	Unique key for cwsPtpTrace
TRA cwsPtpTraceMismatchMode	1.3.6.1.4.1.1271.3.4.8.24.1.2	TraceMismatchMode	read-write	Mismatch Mode
TRA cwsPtpTraceMismatchFailMode	1.3.6.1.4.1.1271.3.4.8.24.1.3	TraceMismatchFailMode	read-write	Mismatch Failure Mode
STR cwsPtpTraceTxSapi	1.3.6.1.4.1.1271.3.4.8.24.1.4	StringMaxl15	read-write	SAPI Tx String
STR cwsPtpTraceTxDapi	1.3.6.1.4.1.1271.3.4.8.24.1.5	StringMaxl15	read-write	DAPI Tx String
STR cwsPtpTraceTxOper	1.3.6.1.4.1.1271.3.4.8.24.1.6	StringMaxl32	read-write	Operator Tx String
STR cwsPtpTraceTxOperActual	1.3.6.1.4.1.1271.3.4.8.24.1.7	StringMaxl32	read-only	Operator Tx String Actual
TRA cwsPtpTraceTxOperMode	1.3.6.1.4.1.1271.3.4.8.24.1.8	TraceTxOperMode	read-write	Operator Tx Mode
STR cwsPtpTraceRxSapi	1.3.6.1.4.1.1271.3.4.8.24.1.9	StringMaxl15	read-only	SAPI Rx String
STR cwsPtpTraceRxDapi	1.3.6.1.4.1.1271.3.4.8.24.1.10	StringMaxl15	read-only	DAPI Rx String
STR cwsPtpTraceRxOper	1.3.6.1.4.1.1271.3.4.8.24.1.11	StringMaxl32	read-only	Operator Rx String
STR cwsPtpTraceExpSapi	1.3.6.1.4.1.1271.3.4.8.24.1.12	StringMaxl15	read-write	SAPI Expected Rx String
STR cwsPtpTraceExpDapi	1.3.6.1.4.1.1271.3.4.8.24.1.13	StringMaxl15	read-write	DAPI Expected Rx String
STR cwsPtpTraceExpOper	1.3.6.1.4.1.1271.3.4.8.24.1.14	StringMaxl32	read-write	Operator Expected Rx String

RFC description

Physical Termination Point management modeling signal characteristics in optical transport systems.

Start monitoring Ciena WaveServer optical transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-WS-PTP-MIB

What Is CIENA-WS-PTP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description