TIMETRA-SDP-MIB

All MIBs › TIMETRA-SDP-MIB

Organization: Alcatel

Last Updated: 2007-10-01

Description: TIMETRA-SDP-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-SDP-MIB?

TIMETRA-SDP-MIB is an Alcatel-Lucent (Nokia SR OS; "Timetra" is the original vendor name) proprietary MIB for managing Service Distribution Points (SDPs) on the 7x50 Service Router (SR) family, the tunnel-like constructs used to carry VPN/VPLS service traffic between routers. It exposes SDP configuration and operational data, including delivery mechanism, far-end IP address, associated LSP list, and administrative/operational status of each SDP. Its monitoring value is chiefly around software/protocol status rather than physical hardware — an operator watches sdpAdminStatus versus operational status to confirm a service tunnel is up, and sdpLspList/sdpLabelSignaling to verify the correct MPLS transport path is in use. Engineers unfamiliar with Alcatel-Lucent's SR OS naming conventions often open the module in a TIMETRA-SDP-MIB MIB Browser session first to enumerate the sdpInfoTable columns, since the module depends on the router's MPLS/RSVP-TE or LDP subsystems for the underlying LSPs referenced by an SDP and fits within Alcatel-Lucent's broader TIMETRA-* MIB family for SR OS. It is deployed on Alcatel-Lucent/Nokia 7x50 Service Routers providing MPLS VPN and VPLS services in service-provider networks.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-SDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status)

Monitoring Examples

An operator would poll sdpInfoTable/sdpInfoEntry indexed by sdpId to check sdpAdminStatus, catching an SDP that is administratively up but operationally broken due to a failed LSP. sdpFarEndIpAddress and sdpDelivery confirm the tunnel is directed at the correct remote PE router using the intended encapsulation. sdpDescription and sdpNumEntries/sdpNextFreeId help an admin inventory how many SDPs are provisioned and identify each by its operator-assigned label.

What Can Be Monitored

SDP administrative status
SDP operational status
far-end IP address of service tunnel
associated LSP list
delivery/encapsulation mechanism

Imported Objects

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TimeStamp
TruthValue

From TIMETRA-CHASSIS-MIB

tmnxCardSlotNum	OBJECT-TYPE
tmnxChassisIndex	OBJECT-TYPE
tmnxMDASlotNum	OBJECT-TYPE

From TIMETRA-FILTER-MIB

TFilterID

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules

OBJECT-IDENTITY

From TIMETRA-SERV-MIB

BridgeId
ConfigStatus
L2RouteOrigin
L2ptProtocols
LspIdList
MvplsPruneState
PWTemplateId
SdpBFHundredthsOfPercent
SdpBindBandwidth
SdpBindVcType
SdpId
ServObjDesc
ServObjName
StpExceptionCondition
StpPortRole
StpProtocol
TStpPortState
TdmOptionsCasTrunkFraming
TdmOptionsSigPkts
TlsBpduTranslation
TlsLimitMacMove
TlsLimitMacMoveLevel
VpnId
custId	OBJECT-TYPE
svcDhcpClientLease	OBJECT-TYPE
svcDhcpCoAError	OBJECT-TYPE
svcDhcpLseStateNewChAddr	OBJECT-TYPE
svcDhcpLseStateNewCiAddr	OBJECT-TYPE
svcDhcpLseStateOldChAddr	OBJECT-TYPE
svcDhcpLseStateOldCiAddr	OBJECT-TYPE
svcDhcpLseStatePopulateError	OBJECT-TYPE
svcDhcpPacketProblem	OBJECT-TYPE
svcDhcpProxyError	OBJECT-TYPE
svcDhcpSubAuthError	OBJECT-TYPE
svcId	OBJECT-TYPE
svcTlsMacMoveMaxRate	OBJECT-TYPE
svcTlsStpDesignatedRoot	OBJECT-TYPE
svcVpnId	OBJECT-TYPE
tlsDhcpPacketProblem	OBJECT-TYPE
tmnxCustomerBridgeId	OBJECT-TYPE
tmnxCustomerRootBridgeId	OBJECT-TYPE
tmnxOldSdpBindTlsStpPortState	OBJECT-TYPE
tmnxOtherBridgeId	OBJECT-TYPE
tmnxServConformance	OBJECT-IDENTITY
tmnxServNotifications	OBJECT-IDENTITY
tmnxServObjs	OBJECT-IDENTITY
tmnxSvcObjs	OBJECT-IDENTITY
tstpTraps	OBJECT-IDENTITY

From TIMETRA-TC-MIB

SdpBindId
ServiceAdminStatus
TItemDescription
TNamedItem
TNamedItemOrEmpty
TPolicyStatementNameOrEmpty
TmnxCustId
TmnxEnabledDisabled
TmnxIgmpVersion
TmnxOperState
TmnxServId
TmnxVPNRouteDistinguisher
TmnxVRtrMplsLspID

How to Use in IPNetwork Monitor

Example using sdpNumEntries OID:

Select a Nokia/Alcatel-Lucent 7x50 Service Router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sdpNumEntries into the Find box to locate it in the OID tree, then select it and click OK. It reports the current number of Service Distribution Points (SDPs) configured on this device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate an SDP was added or removed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraServicesSdpMIBModule	1.3.6.1.4.1.6527.1.1.3.56			This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxSdpConformance	1.3.6.1.4.1.6527.3.1.1.4.4
tmnxSdpCompliances	1.3.6.1.4.1.6527.3.1.1.4.4.1
tmnxSdp77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.4.4.1.8			The compliance statement for management of services SDPs on Alcatel 7750 SR and 7710 SR series systems.
tmnxSdp7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.4.4.1.9			The compliance statement for management of services SDPs on Alcatel 7450 ESS series systems.
tmnxSdpGroups	1.3.6.1.4.1.6527.3.1.1.4.4.2
tmnxSdpV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.100			The group of objects supporting SDP base feature on Alcatel 7x50 SR series systems.
tmnxSdpBindV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.101			The group of objects supporting SDP Bind feature on Alcatel 7x50 SR series systems.
tmnxSdpBindTlsV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.102			The group of objects supporting SDP Bind TLS feature on Alcatel 7x50 SR series systems.
tmnxSdpBindMeshV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.103			The group of objects supporting mesh SDP bind feature on Alcatel 7x50 SR series systems.
tmnxSdpApipeV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.104			The group of objects supporting SDP A-Pipe feature on Alcatel 7x50 SR series systems.
tmnxSdpBindDhcpV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.105			The group of objects supporting SDP Bind DHCP feature on Alcatel 7x50 SR series systems.
tmnxSdpBindIpipeV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.106			The group of objects supporting SDP Bind I-Pipe feature on Alcatel 7x50 SR series systems.
tmnxSdpFCV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.107			The group of objects supporting SDP FC feature on Alcatel 7x50 SR series systems.
tmnxSdpBindCpipeV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.108			The group of objects supporting SDP bind C-Pipe feature on Alcatel 7x50 SR series systems.
tmnxSdpBindTlsL2ptV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.109			The group of objects supporting SDP bind L2pt feature on Alcatel 7x50 SR series systems.
tmnxSdpAutoBindV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.112			The group of objects supporting SDP auto-bind feature on Alcatel 7x50 SR series systems.
tmnxSdpBindTlsMrpV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.113			The group of objects supporting SDP MRP feature on Alcatel 7x50 SR series systems.
tmnxSdpTlsBgpV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.114			The group of objects supporting SDP BGP feature on Alcatel 7x50 SR series systems.
tmnxSdpL2V6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.115			The group of objects supporting SDP L2 Route feature on Alcatel 7x50 SR series systems.
tmnxSdpNotifyObjsV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.200			The group of objects supporting SDP notification objects on Alcatel 7x50 SR series systems.
tmnxSdpNotifyV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.400			The group of SDP notifications on Alcatel 7x50 SR series systems.
tmnxSdpObsoletedNotifyV6v0Group	1.3.6.1.4.1.6527.3.1.1.4.4.2.401			The group of obsoleted SDP objects on Alcatel 7x50 SR series systems.
TIM svcTlsBgpADPWTempBindTblLC	1.3.6.1.4.1.6527.3.1.2.4.2.32	TimeStamp	read-only	The value of svcTlsBgpADPWTempBindTblLC indicates the sysUpTime at the time of the last modification of svcTlsBgpADPWTempBindTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
svcTlsBgpADPWTempBindTable	1.3.6.1.4.1.6527.3.1.2.4.2.33		not-accessible	svcTlsBgpADPWTempBindTable contains entries for the associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service.
svcTlsBgpADPWTempBindEntry	1.3.6.1.4.1.6527.3.1.2.4.2.33.1		not-accessible	A SDP Auto-Bind Policy entry in the svcTlsBgpADPWTempBindTable.
ROW svcTlsBgpADPWTempBindRowStatus	1.3.6.1.4.1.6527.3.1.2.4.2.33.1.1	RowStatus	read-create	The value of svcTlsBgpADPWTempBindRowStatus is used for the creation and deletion of associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service.
TIM svcTlsBgpADPWTempBindLastChngd	1.3.6.1.4.1.6527.3.1.2.4.2.33.1.2	TimeStamp	read-only	The value of svcTlsBgpADPWTempBindLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TNA svcTlsBgpADPWTempBindSHG	1.3.6.1.4.1.6527.3.1.2.4.2.33.1.3	TNamedItemOrEmpty	read-create	The value of svcTlsBgpADPWTempBindSHG specifies the split-horizon group to associate with the SDP Auto-Bind policy in this BGP Auto-Discovery context in a VPLS service. When this Auto-Bind policy is used to create an SDP, this split-horizon group will be associated with the SDP. The name specified must correspond to an existing split-horizon group in the VPLS service, otherwise an 'inconsistentValue' error will be returned.
TIM svcTlsBgpADPWTempBindRTTblLC	1.3.6.1.4.1.6527.3.1.2.4.2.34	TimeStamp	read-only	The value of svcTlsBgpADPWTempBindRTTblLC indicates the sysUpTime at the time of the last modification of svcTlsBgpADPWTempBindRTTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
svcTlsBgpADPWTempBindRTTable	1.3.6.1.4.1.6527.3.1.2.4.2.35		not-accessible	svcTlsBgpADPWTempBindTable contains entries for Route Targets associated with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service.
svcTlsBgpADPWTempBindRTEntry	1.3.6.1.4.1.6527.3.1.2.4.2.35.1		not-accessible	A SDP Auto-Bind Policy Route Target entry in the svcTlsBgpADPWTempBindRTTable.
TNA svcTlsBgpADPWTempBindRT	1.3.6.1.4.1.6527.3.1.2.4.2.35.1.1	TNamedItem	not-accessible	The value of svcTlsBgpADPWTempBindRT is the Route Target associated with a PW template and a BGP Auto-Discovery context for a VPLS service. When advertisements are received with this Route Target, the PW template specified by the index, pwTemplateId, will be used to create the SDP.
ROW svcTlsBgpADPWTempBindRTRowStat	1.3.6.1.4.1.6527.3.1.2.4.2.35.1.2	RowStatus	read-create	The value of svcTlsBgpADPWTempBindRTRowStat is used for the association of Route Targets with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service.
TIM svcL2RteTableLastChanged	1.3.6.1.4.1.6527.3.1.2.4.2.38	TimeStamp	read-only	The value of svcL2RteTableLastChanged indicates the sysUpTime at the time of the last modification of svcL2RteTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
svcL2RteTable	1.3.6.1.4.1.6527.3.1.2.4.2.39		not-accessible	svcL2RteTable contains entries for L2 routes.
svcL2RteEntry	1.3.6.1.4.1.6527.3.1.2.4.2.39.1		not-accessible	An L2 route entry in the svcL2RteTable.
U32 svcL2RteVsiPrefix	1.3.6.1.4.1.6527.3.1.2.4.2.39.1.1	Unsigned32	not-accessible	The value of svcL2RteVsiPrefix is the low-order 4 bytes of the Virtual Switch Instance idendifier (VSI-id) of the remote VSI for this L2 route.
TMN svcL2RteRouteDistinguisher	1.3.6.1.4.1.6527.3.1.2.4.2.39.1.2	TmnxVPNRouteDistinguisher	not-accessible	The value of svcL2RteRouteDistinguisher is the high-order 6 bytes of the Virtual Switch Instance idendifier (VSI-id) of the remote VSI for this L2 route.
IPt svcL2RteNextHopType	1.3.6.1.4.1.6527.3.1.2.4.2.39.1.3	InetAddressType	not-accessible	The value of svcL2RteNextHopType indicates the address type of svcL2RteNextHop.
IP svcL2RteNextHop	1.3.6.1.4.1.6527.3.1.2.4.2.39.1.4	InetAddress	not-accessible	The value of svcL2RteNextHop indicates the IP next hop for this L2 route. This value is equivilant to the IP address of the Far End of this L2 route.
SDP svcL2RteSdpBindId	1.3.6.1.4.1.6527.3.1.2.4.2.39.1.5	SdpBindId	read-only	The value of svcL2RteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop.
PWT svcL2RtePwTemplateId	1.3.6.1.4.1.6527.3.1.2.4.2.39.1.6	PWTemplateId	read-only	The value of svcL2RtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop.
tmnxSdpObjs	1.3.6.1.4.1.6527.3.1.2.4.4
I32 sdpNumEntriesEx	1.3.6.1.4.1.6527.3.1.2.4.4.1	Integer32	read-only	The current number of SDPs configured in this device.
SDP sdpNextFreeId	1.3.6.1.4.1.6527.3.1.2.4.4.2	SdpId	read-only	The next available value for sdpId.
sdpInfoTable	1.3.6.1.4.1.6527.3.1.2.4.4.3		not-accessible	A table that contains SDP information.
sdpInfoEntry	1.3.6.1.4.1.6527.3.1.2.4.4.3.1		not-accessible	Information about a specific SDP.
SDP sdpId	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.1	SdpId	read-only	SDP identifier.
ROW sdpRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.2	RowStatus	read-create	This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, the corresponding SDP must be administratively down, not bound to any service, and not in use as a mirror destination.
INT sdpDelivery	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.3	INTEGER	read-create	This object specifies the type of delivery used by this SDP: e.g. GRE or MPLS. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.
IP sdpFarEndIpAddress	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.4	IpAddress	read-create	This object specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. The value of this object must be set for the row to become 'active', and can only be changed while the admin status of the SDP is 'down'.
LSP sdpLspList	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.5	LspIdList	read-create	When the SDP delivery specified by sdpDelivery is 'mpls', this object specifies the list of LSPs used to reach the far-end ESR device. All the LSPs in this list must terminate at the IP address specified by sdpFarEndIpAddress. This object is otherwise insignificant and should contain a value of 0. When this list has more than one element, the Alcatel 7x50 SR router will use all of the LSPs for load balancing purposes. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP.
SER sdpDescription	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.6	ServObjDesc	read-create	Generic information about this SDP.
INT sdpLabelSignaling	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.7	INTEGER	read-create	This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. When the value of this object is 'none' then the labels are manually assigned at the time the SDP is bound to a service. The value of this object can only be changed while the admin status of the SDP is 'down'.
SER sdpAdminStatus	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.8	ServiceAdminStatus	read-create	The desired state of this SDP.
INT sdpOperStatus	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.9	INTEGER	read-only	The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive operating status is not alive. The value 'notReady' is valid only when this SDP uses a label signaling protocol (e.g. TLDP) and it means that the signaling session with the far-end peer has not been established. The value 'invalidEgressInterface' indicates that the IOM's have detected that the egress interface towards the far-end device is not a network port.
INT sdpAdminPathMtu	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.10	INTEGER	read-create	This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel.
I32 sdpOperPathMtu	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.11	Integer32	read-only	This object specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to a given service, the value of this object must be equal to or larger than the MTU of the service, as defined by its svcMtu.
INT sdpKeepAliveAdminStatus	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.12	INTEGER	read-create	This object is used to enable or disable the keep-alive protocol used to determine the operating status of this SDP.
INT sdpKeepAliveOperStatus	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.13	INTEGER	read-only	The current status of the keep-alive protocol. The value 'alive' indicates that the far-end ESR is replying the SDP Echo Requests messages sent by this device indicating no error condition. The value 'noResponse' indicates that the number of consecutive SDP Echo Request messages unack- nowledged by the far-end ESR exceeded the limit defined by sdpKeepAliveMaxDropCount. The values 'senderIdInvalid' and 'responderIdError' are two error conditions detected by the far-end ESR. The value 'disabled' indicates that the keep-alive protocol is not enabled.
INT sdpKeepAliveHelloTime	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.14	INTEGER	read-create	This object specifies how often the SDP Echo Request messages are transmitted on this SDP.
INT sdpKeepAliveMaxDropCount	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.15	INTEGER	read-create	This object specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keep-alive protocol reports a fault.
INT sdpKeepAliveHoldDownTime	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.16	INTEGER	read-create	This object specifies the amount of time to wait before the keep-alive operating status is eligible to enter the 'alive' state.
TIM sdpLastMgmtChange	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.17	TimeStamp	read-only	The value of sysUpTime at the time of the most recent management-initiated change to this SDP.
INT sdpKeepAliveHelloMessageLength	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.18	INTEGER	read-create	This object specifies the length of the SDP Echo Request messages transmitted on this SDP. The default value of zero indicates that the message length should be equal to the SDP's operating path MTU, as specified by sdpOperPathMtu. When the default value is overridden, the message length is sdpKeepAliveHelloMessageLength.
U32 sdpKeepAliveNumHelloRequestMessages	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.19	Unsigned32	read-only	The number of SDP Echo Request messages transmitted since the keep-alive was administratively enabled or the counter was cleared.
U32 sdpKeepAliveNumHelloResponseMessages	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.20	Unsigned32	read-only	The number of SDP Echo Response messages received since the keep-alive was administratively enabled or the counter was cleared.
U32 sdpKeepAliveNumLateHelloResponseMessages	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.21	Unsigned32	read-only	The number of SDP Echo Response messages received after the corresponding Request timeout timer expired.
INT sdpKeepAliveHelloRequestTimeout	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.22	INTEGER	read-create	The number of seconds to wait for an SDP Echo Response message before declaring a timeout.
T/F sdpLdpEnabled	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.23	TruthValue	read-create	When the value of this object is 'true' the transport LSP's are signalled by LDP, as opposed to being provisioned static or RSVP-signalled LSP's. This object applies only to MPLS SDP's.
U32 sdpVlanVcEtype	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.24	Unsigned32	read-create	This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan.
T/F sdpAdvertisedVllMtuOverride	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.25	TruthValue	read-create	When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is backward compatible with pre-2.0 software.
BIT sdpOperFlags	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.26	Bits	read-only	This object specifies all the conditions that affect the operating status of this SDP.
TIM sdpLastStatusChange	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.27	TimeStamp	read-only	The value of sysUpTime at the time of the most recent operating status change to this SDP.
TMN sdpMvplsMgmtService	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.28	TmnxServId	read-only	The value of sdpMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SDP. This object is only valid if sdpMvplsMgmtService is different from 0.
SDP sdpMvplsMgmtSdpBndId	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.29	SdpBindId	read-only	The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the mVPLS instance specified in sdpMvplsMgmtService is controlling this SDP. This object is only valid if sdpMvplsMgmtService is different from 0.
T/F sdpCollectAcctStats	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.30	TruthValue	read-create	The value of the object sdpCollectAcctStats specifies whether the agent collects accounting statistics for this SDP. When the value is 'true' the agent collects accounting statistics on this SDP.
U32 sdpAccountingPolicyId	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.31	Unsigned32	read-create	The value of sdpAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP. The value zero indicates that the agent should use the default accounting policy, if one exists.
T/F sdpClassFwdingEnabled	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.32	TruthValue	read-create	The value of sdpClassFwdingEnabled specifies the admin state of class-based forwarding on this SDP. When the value is 'true', class-based forwarding is enabled.
TMN sdpClassFwdingDefaultLsp	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.33	TmnxVRtrMplsLspID	read-create	The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding.
TMN sdpClassFwdingMcLsp	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.34	TmnxVRtrMplsLspID	read-create	The value of sdpClassFwdingMcLsp specifies the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be forwarded on an LSP according to its forwarding class mapping.
U32 sdpMetric	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.35	Unsigned32	read-create	The value of sdpMetric specifies the metric to be used within the Tunnel Table Manager for decision making purposes. When multiple SDPs going to the same destination exist, this value is used as a tie-breaker by Tunnel Table Manager users like MP-BGP to select route with lower value.
T/F sdpAutoSdp	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.36	TruthValue	read-only	The value of sdpAutoSdp indicates whether this is an Auto generated SDP from RADIUS discovery or BGP auto-discovery.
T/F sdpSnmpAllowed	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.37	TruthValue	read-only	The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this SDP.
U32 sdpPBBEtype	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.38	Unsigned32	read-create	This object specifies the Ethertype used in frames sent out on this SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridging frames.
U32 sdpBandwidthBookingFactor	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.39	Unsigned32	read-create	sdpBandwidthBookingFactor is used to calculate the max SDP available bandwidth. The value of sdpBandwidthBookingFactor specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value of sdpBandwidthBookingFactor is set to zero (0), no new VLL spoke-sdp bindings with non-zero bandwidth are permitted with this SDP. Overbooking, >100% is allowed.
U32 sdpOperBandwidth	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.40	Unsigned32	read-only	The value of sdpOperBandwidth indicates the operational Bandwidth in kilo-bits per seconds (Kbps) available for this SDP. The value sdpOperBandwidth is determined by the sum of the bandwidth of all the RSVP LSPs used by the SDP.
U32 sdpAvailableBandwidth	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.41	Unsigned32	read-only	The value of sdpAvailableBandwidth indicates the Bandwidth that is still free for booking by the SDP bindings on the SDP.
U32 sdpMaxBookableBandwidth	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.42	Unsigned32	accessible-for-notify	The value of sdpMaxBookableBandwidth indicates the max Bandwidth that the SDP has for booking by the SDP bindings. The value of sdpMaxBookableBandwidth is calculated as follow: sdpMaxBookableBandwidth = sdpOperBandwidth * sdpBandwidthBookingFactor
U32 sdpBookedBandwidth	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.43	Unsigned32	accessible-for-notify	The value of sdpBookedBandwidth indicates the SDP Bandwidth that has been booked by the SDP bindings.
L2R sdpCreationOrigin	1.3.6.1.4.1.6527.3.1.2.4.4.3.1.44	L2RouteOrigin	read-only	The value of sdpCreationOrigin indicates the protocol or mechanism which created this SDP.
sdpBindTable	1.3.6.1.4.1.6527.3.1.2.4.4.4		not-accessible	A table that contains SDP binding information.
sdpBindEntry	1.3.6.1.4.1.6527.3.1.2.4.4.4.1		not-accessible	Information about a specific SDP binding.
SDP sdpBindId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.1	SdpBindId	read-only	SDP Binding identifier.
ROW sdpBindRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.2	RowStatus	read-create	This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.
U32 sdpBindAdminIngressLabel	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.3	Unsigned32	read-create	The static MPLS VC label used by the far-end device to send packets to this device in this service via this SDP. The value of sdpBindAdminIngressLabel is 1 when it is used by a mirror service. All mirror SDPs use this label to avoid the unnecessary use of additional labels.
U32 sdpBindAdminEgressLabel	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.4	Unsigned32	read-create	The static MPLS VC label used by this device to send packets to the far-end device in this service via this SDP.
U32 sdpBindOperIngressLabel	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.5	Unsigned32	read-only	The MPLS label used by the far-end device to send packets to this device in this service via this SDP. This label is either sdpBindAdminIngressLabel, if not null, or the one obtained via the SDP's signaling protocol.
U32 sdpBindOperEgressLabel	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.6	Unsigned32	read-only	The MPLS label used by this device to send packets to the far-end device in this service via this SDP. This label is either sdpBindAdminEgressLabel, if not null, or the one obtained via the SDP's signaling protocol.
SER sdpBindAdminStatus	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.7	ServiceAdminStatus	read-create	The desired state of this Service-SDP binding.
INT sdpBindOperStatus	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.8	INTEGER	read-only	The value of sdpBindOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational. 'noEgressLabel' The ingress label is available but the egress one is missing. 'noIngressLabel' The egress label is available but the ingress one is not. 'noLabels' Both the ingress and the egress labels are missing. 'down' The binding is administratively down. 'svcMtuMismatch' Both labels are available, but a service MTU mismatch was detected between the local and the far-end devices. 'sdpPathMtuTooSmall' The operating path MTU of the corresponding SDP is smaller than the service MTU. 'sdpNotReady' The SDP's signaling session is down. 'sdpDown' The SDP is not operationally up. 'sapDown' The SAP associated with the service is down.
TIM sdpBindLastMgmtChange	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.9	TimeStamp	read-only	The value of sysUpTime at the time of the most recent management-initiated change to this Service-SDP binding.
INT sdpBindType	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.10	INTEGER	read-create	This object indicates whether this Service SDP binding is a spoke or a mesh. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.
TFI sdpBindIngressMacFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.11	TFilterID	read-create	The row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.
TFI sdpBindIngressIpFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.12	TFilterID	read-create	The row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.
TFI sdpBindEgressMacFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.13	TFilterID	read-create	The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.
TFI sdpBindEgressIpFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.14	TFilterID	read-create	The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.
VPN sdpBindVpnId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.15	VpnId	read-only	The VPN ID of the associated service.
TMN sdpBindCustId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.16	TmnxCustId	read-only	The Customer ID of the associated service.
SDP sdpBindVcType	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.17	SdpBindVcType	read-create	The value of sdpBindVcType is an enumerated integer that specifies the type of virtual circuit (VC) associated with the SDP binding. The value 'vpls' is no longer supported.
U32 sdpBindVlanVcTag	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.18	Unsigned32	read-create
SER sdpBindSplitHorizonGrp	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.19	ServObjName	read-create	This value of the object sdpBindSplitHorizonGrp specifies the name of the split-horizon group where the spoke SDP Bind belongs to. This object can be set only at the time the row is created. Per default a spoke SDP Bind does not belong to any split-horizon group. The name specified must correspond to an existing split-horizon group in the TLS service where this spoke SDP Bind is defined.
BIT sdpBindOperFlags	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.20	Bits	read-only	This object specifies all the conditions that affect the operating status of this SDP Bind.
TIM sdpBindLastStatusChange	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.21	TimeStamp	read-only	The value of the object sdpBindLastStatusChange specifies the value of sysUpTime at the time of the most recent operating status change to this SDP Bind.
NUM sdpBindIesIfIndex	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.22	InterfaceIndexOrZero	read-create	When this SDP Bind is defined on an IES service and the value of sdpBindType is 'spoke', this object specifies the index of the associated IES interface. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero.
TMN sdpBindMacPinning	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.23	TmnxEnabledDisabled	read-create	The value of the object sdpBindMacPinning specifies whether or not MAC address pinning is active on this SDP bind (mesh or spoke). Setting the value to enable disables re-learning of MAC addresses on other SAPs or SDPs within the same VPLS; the MAC address will hence remain attached to the SDP Bind for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP. The value will be set by default to disabled. However for a spoke SDP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. This object applies to spoke-SDP associated with the service with svcType set to 'tls'.
TFI sdpBindIngressIpv6FilterId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.24	TFilterID	read-create	The value of the object sdpBindIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.
TFI sdpBindEgressIpv6FilterId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.25	TFilterID	read-create	The value of the object sdpBindEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.
T/F sdpBindCollectAcctStats	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.26	TruthValue	read-create	The value of the object sdpBindCollectAcctStats specifies whether the agent collects accounting statistics for this SDP bind. When the value is 'true' the agent collects accounting statistics on this SDP bind.
U32 sdpBindAccountingPolicyId	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.27	Unsigned32	read-create	The value of sdpBindAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP bind. The value zero indicates that the agent should use the default accounting policy, if one exists.
BIT sdpBindPwPeerStatusBits	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.28	Bits	read-only	sdpBindPwPeerStatusBits indicates the bits set by the LDP peer when there is a fault on its side of the pseudowire. LAC failures occur on the SAP that has been configured on the PIPE service, PSN bits are set by SDP-binding failures on the PIPE service. The pwNotForwarding bit is set when none of the above failures apply, such as an MTU mismatch failure. This value is only applicable if the peer is using the pseudowire status signalling method to indicate faults.
BIT sdpBindPeerVccvCvBits	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.29	Bits	read-only	sdpBindPeerVccvCvBits indicates the CV type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, the bits will be set to 0.
BIT sdpBindPeerVccvCcBits	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.30	Bits	read-only	sdpBindPeerVccvCcBits indicates the CC type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, the bits will all be 0.
T/F sdpBindControlWordBit	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.31	TruthValue	read-create	sdpBindControlWordBit specifies whether the use of the 'ControlWord' is preferred or not. The value of sdpBindControlWordBit is exchanged with LDP peer during pseudowire negotiation time. The default value is determined by sdpBindVcType. sdpBindVcType of atmSdu and frDlci must have default value of 'true'. Other values of sdpBindVcType must have default value of 'false'.
T/F sdpBindOperControlWord	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.32	TruthValue	read-only	sdpBindOperControlWord indicates whether the 'ControlWord' is used or not. The value of sdpBindOperControlWord is negotiated with the LDP peer. When both the local and the peer prefer the use of the 'ControlWord', sdpBindOperControlWord has the value of 'true'.
SER sdpBindEndPoint	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.33	ServObjName	read-create	sdpBindEndPoint specifies the service endpoint to which this SDP bind is attached. The svcId of the SDP bind MUST match the svcId of the service endpoint.
U32 sdpBindEndPointPrecedence	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.34	Unsigned32	read-create	sdpBindEndPointPrecedence specifies the precedence of this SDP bind when there are multiple SDP binds attached to one service endpoint. The value 0 can only be assigned to one SDP bind, making it the primary SDP bind. When an SDP bind goes down, the next highest precedence SDP bind begins forwarding traffic.
T/F sdpBindIsICB	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.35	TruthValue	read-create	sdpBindIsICB specifies whether this sdpBind is an inter-chassis backup SDP bind.
IPt sdpBindPwFaultInetAddressType	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.36	InetAddressType	read-only	The value of the object sdpBindPwFaultInetAddressType indicates the address type of sdpBindPwFaultInetAddress.
IP sdpBindPwFaultInetAddress	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.37	InetAddress	read-only	The value of sdpBindPwFaultInetAddress indicates the IP address that was included in the pseudowire status message sent by the LDP peer. This value is only applicable if the peer is using the pseudowire status signalling method to indicate faults.
TMN sdpBindClassFwdingOperState	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.38	TmnxOperState	read-only	The value of sdpBindClassFwdingOperState indicates the operational state of forwarding-class based forwarding on this sdpBind. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'false', the value of sdpBindClassFwdingOperState is 'outOfService'. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'true' and the svcType of the service this sdpBind is defined on is 'tls', 'vprn', or 'ies', the value of sdpBindClassFwdingOperState is 'inService'. If the service has svcVcSwitching set to 'true', the value of sdpBindClassFwdingOperState is 'inService' When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'true' and the svcType of the service this sdpBind is defined on is 'epipe', 'apipe', 'fpipe', or 'ipipe' with no SAP defined on the service, the value of sdpBindClassFwdingOperState is 'unknown'. If the service has a SAP with a NULL sapIngressSharedQueuePolicy, the value of sdpBindClassFwdingOperState is 'outOfService'. If the service has a SAP with a non-NULL sapIngressSharedQueuePolicy, the value of sdpBindClassFwdingOperState is 'inService'.
T/F sdpBindForceVlanVcForwarding	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.39	TruthValue	read-create	The value of sdpBindForceVlanVcForwarding specifies whether or not vc-vlan-type forwarding is forced in the data-path for the sdp which have sdpBindVcType set to 'ether'. When set to 'true' vc-vlan-type forwarding is forced. An 'inconsistentValue' error is returned when an attempt is made to set the value of sdpBindForceVlanVcForwarding to 'true' and sdpBindVcType is not set to 'ether'.
SDP sdpBindAdminBandwidth	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.40	SdpBindBandwidth	read-create	The value of the object sdpBindAdminBandwidth specifies the bandwidth that needs to be reserved for this SDP binding in kilo-bits per second. The SdpBindBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services.
SDP sdpBindOperBandwidth	1.3.6.1.4.1.6527.3.1.2.4.4.4.1.41	SdpBindBandwidth	read-only	The value of the object sdpBindOperBandwidth indicates the bandwidth that has been reserved for this SDP binding in kilo-bits per second. The value 0 indicates that SDP doesn't have bandwidth to satisfy the bandwidth requirement of this SDP binding. The sdpBindOperBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services.
sdpBindBaseStatsTable	1.3.6.1.4.1.6527.3.1.2.4.4.5		not-accessible	A table that contains basic SDP Binding statistics.
sdpBindBaseStatsEntry	1.3.6.1.4.1.6527.3.1.2.4.4.5.1		not-accessible	Basic statistics about a specific SDP Binding.
C64 sdpBindBaseStatsIngressForwardedPackets	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.1	Counter64	read-only
C64 sdpBindBaseStatsIngressDroppedPackets	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.2	Counter64	read-only
C64 sdpBindBaseStatsEgressForwardedPackets	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.3	Counter64	read-only
C64 sdpBindBaseStatsEgressForwardedOctets	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.4	Counter64	read-only
TMN sdpBindBaseStatsCustId	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.5	TmnxCustId	read-only	The Customer ID of the associated service.
C64 sdpBindBaseStatsIngFwdOctets	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.6	Counter64	read-only
C64 sdpBindBaseStatsIngDropOctets	1.3.6.1.4.1.6527.3.1.2.4.4.5.1.7	Counter64	read-only
sdpBindTlsTable	1.3.6.1.4.1.6527.3.1.2.4.4.6		not-accessible	A table that contains TLS spoke SDP Bind information.
sdpBindTlsEntry	1.3.6.1.4.1.6527.3.1.2.4.4.6.1		not-accessible	TLS specific information about an SDP Bind.
TMN sdpBindTlsStpAdminStatus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.1	TmnxEnabledDisabled	read-write	The value of the object sdpBindTlsStpAdminStatus specifies whether this SDP Bind participates in the TLS's Spanning Tree Protocol.
INT sdpBindTlsStpPriority	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.2	INTEGER	read-write	The value of the object sdpBindTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SDP Bind. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.
INT sdpBindTlsStpPortNum	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.3	INTEGER	read-write	The value of the object sdpBindTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SDP Bind. Values in the range 2048..4094 are automatically assigned by the agent when the SDP Bind is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots.
INT sdpBindTlsStpPathCost	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.4	INTEGER	read-write	The value of the object sdpBindTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.
TMN sdpBindTlsStpRapidStart	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.5	TmnxEnabledDisabled	read-write	The value of the object sdpBindTlsStpRapidStart specifies whether Rapid Start is enabled on this SDP Bind. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SDP Bind are driven by the value of the 'HelloTime', instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state.
INT sdpBindTlsStpBpduEncap	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.6	INTEGER	read-write	The value of the object sdpBindTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SDP Bind.
TST sdpBindTlsStpPortState	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.7	TStpPortState	read-only	The value of the object sdpBindTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state. All possible states are: learning, forwarding, broken, and discarding.
BRI sdpBindTlsStpDesignatedBridge	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.8	BridgeId	read-only	The value of the object sdpBindTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
I32 sdpBindTlsStpDesignatedPort	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.9	Integer32	read-only	The value of the object sdpBindTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment.
G32 sdpBindTlsStpForwardTransitions	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.10	Gauge32	read-only	The value of the object sdpBindTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state.
G32 sdpBindTlsStpInConfigBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.11	Gauge32	read-only	The value of the object sdpBindTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SDP Bind.
G32 sdpBindTlsStpInTcnBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.12	Gauge32	read-only	The value of the object sdpBindTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SDP Bind.
G32 sdpBindTlsStpInBadBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.13	Gauge32	read-only	The value of the object sdpBindTlsStpInBadBpdus indicates the number of bad BPDUs received on this SDP Bind.
G32 sdpBindTlsStpOutConfigBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.14	Gauge32	read-only	The value of the object sdpBindTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SDP Bind.
G32 sdpBindTlsStpOutTcnBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.15	Gauge32	read-only	The value of the object sdpBindTlsStpOutTcnBpdus indicates the number of Topology Change Notification BPDUs sent out this SDP Bind.
INT sdpBindTlsStpOperBpduEncap	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.16	INTEGER	read-only	The value of the object sdpBindTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SDP Bind.
VPN sdpBindTlsStpVpnId	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.17	VpnId	read-only	The value of the object sdpBindTlsStpVpnId indicates the VPN ID of the associated service.
TMN sdpBindTlsStpCustId	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.18	TmnxCustId	read-only	The value of the object sdpBindTlsStpCustId indicates the Customer ID of the associated service.
I32 sdpBindTlsMacAddressLimit	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.19	Integer32	read-write	The value of the object sdpBindTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for this SDP Bind. The value 0 means: no limit for this SDP Bind. The command is valid only for spoke SDPs. When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of sdpBindTlsMacAddressLimit is '131071'.
I32 sdpBindTlsNumMacAddresses	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.20	Integer32	read-only	The value of the object sdpBindTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SDP Bind (Both learned and static MAC addresses are counted).
I32 sdpBindTlsNumStaticMacAddresses	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.21	Integer32	read-only	The value of the object sdpBindTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SDP Bind.
TMN sdpBindTlsMacLearning	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.22	TmnxEnabledDisabled	read-write	The value of the object sdpBindTlsMacLearning specifies whether the MAC learning process is enabled for this SDP Bind. The value is ignored if MAC learning is disabled on service level.
TMN sdpBindTlsMacAgeing	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.23	TmnxEnabledDisabled	read-write	The value of the object sdpBindTlsMacAgeing specifies whether the MAC aging process is enabled for this SDP Bind. the value is ignored if MAC aging is disabled on service level.
T/F sdpBindTlsStpOperEdge	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.24	TruthValue	read-only	The value of the object sdpBindTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sdpBindTlsStpRapidStart and is set FALSE on reception of a BPDU.
INT sdpBindTlsStpAdminPointToPoint	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25	INTEGER	read-write	The value of the object xx sdpBindTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sdp. A value of 'forceTrue' indicates that this port should always be treated as if it is connected to a point-to-point link. A value of 'forceFalse' indicates that this port should be treated as having a shared media connection.
STP sdpBindTlsStpPortRole	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.26	StpPortRole	read-only	The value of the object sdpBindTlsStpPortRole indicates the current role of the sdp as defined by the Rapid Spanning Tree Protocol.
TMN sdpBindTlsStpAutoEdge	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.27	TmnxEnabledDisabled	read-write	The value of the object sdpBindTlsStpAutoEdge specifies whether this SDP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.
STP sdpBindTlsStpOperProtocol	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.28	StpProtocol	read-only	The value of the object sdpBindTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this spoke sdp. If the protocol is not enabled on this spoke-sdp the value notApplicable is returned.
G32 sdpBindTlsStpInRstBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.29	Gauge32	read-only	The value of the object sdpBindTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (Rst) BPDUs received on this SDP.
G32 sdpBindTlsStpOutRstBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.30	Gauge32	read-only	The value of the object sdpBindTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (Rstp) BPDUs sent out on this SDP.
TLS sdpBindTlsLimitMacMove	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.31	TlsLimitMacMove	read-write	When sdpBindTlsLimitMacMove value is set to blockable (1) the agent will monitor the MAC relearn rate on this SDP Bind, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SDP binding will not be blocked, and another blockable SDP binding will be blocked instead.
TMN sdpBindTlsDiscardUnknownSource	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.32	TmnxEnabledDisabled	read-write	With the object sdpBindTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SDP Bind (only for spoke SDPs). When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sdpBindTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead.
MVP sdpBindTlsMvplsPruneState	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.33	MvplsPruneState	read-only	The value of the object sdpBindTlsMvplsPruneState indicates the mVPLS prune state of the spoke SDP. The object will be set to notApplicable if the spoke SDP is not managed by a mVPLS. If the SDP is managed the state reflects whether or not it is pruned by the STP instance running in the mVPLS instance.
TMN sdpBindTlsMvplsMgmtService	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.34	TmnxServId	read-only	The value of the object sdpBindTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this spoke SDP. This object is only valid if sdpBindTlsMvplsPruneState is different from notApplicable.
SDP sdpBindTlsMvplsMgmtSdpBndId	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.35	SdpBindId	read-only	The value of the object sdpBindTlsMvplsMgmtSdpBndId indicates the SDP bind id in the mVPLS instance specified in sdpBindTlsMvplsMgmtService that is controlling this SDP. This object is only valid if sdpBindTlsMvplsPruneState is different from notApplicable.
STP sdpBindTlsStpException	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.36	StpExceptionCondition	read-only	The value of the object sdpBindTlsStpException indicates whether an STP exception condition is present on this Spoke Sdp. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link.
TMN sdpBindTlsL2ptTermination	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.37	TmnxEnabledDisabled	read-write	The value of the object sdpBindTlsL2ptTermination specifies whether received L2 Protocol Tunnel pdu's are terminated on this port or sdp
TLS sdpBindTlsBpduTranslation	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.38	TlsBpduTranslation	read-write	The value of the object sdpBindTlsBpduTranslation specifies whether received L2 Protocol Tunnel pdu's are translated before being sent out on this port or sap
T/F sdpBindTlsStpRootGuard	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.39	TruthValue	read-write	The value of the object sdpBindTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.
G32 sdpBindTlsStpInMstBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.40	Gauge32	read-only	The value of the object sdpBindTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs received on this SDP.
G32 sdpBindTlsStpOutMstBpdus	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.41	Gauge32	read-only	The value of the object sdpBindTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs sent out on this SDP.
BRI sdpBindTlsStpRxdDesigBridge	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.42	BridgeId	read-only	The value of the object sdpBindTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SDP.
U32 sdpBindTlsMacMoveNextUpTime	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.43	Unsigned32	read-only	The value of the object sdpBindTlsMacMoveNextUpTime counts down the time in seconds until a SDP bind that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sdpBindOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SDP bind will never be automatically brought up. The value is zero when sdpBindOperStatus is 'up'.
U32 sdpBindTlsMacMoveRateExcdLeft	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.44	Unsigned32	read-only	The value of the object sapTlsMacMoveRateExcdLeft counts down the number of times this SDP bind can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up.
TLS sdpBindTlsLimitMacMoveLevel	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.45	TlsLimitMacMoveLevel	read-write	The value of the object sdpBindTlsLimitMacMoveLevel specifies the hierarchy in which spoke-SDPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)
INT sdpBindTlsBpduTransOper	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.46	INTEGER	read-only	The value of the object sdpBindTlsBpduTransOper indicates the operational BPDU encapsulation used for BPDU translated frames.
L2P sdpBindTlsL2ptProtocols	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.47	L2ptProtocols	read-write	The value of the object sdpBindTlsL2ptTermination specifies which L2 Protocol Tunnel pdu's are terminated on this port or sdp
T/F sdpBindTlsIgnoreStandbySig	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48	TruthValue	read-write	The value of sdpBindTlsIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored. When set to 'true', this bit is not considered in the internal tasks. A similar object svcEndPointIgnoreStandbySig is present at the endpoint level. If this spoke-SDP is part of that explicit endpoint, this object will be set to the value of svcEndPointIgnoreStandbySig and its value will not allowed to be changed. This spoke-SDP can be made part of an explicit-endpoint only if the setting of this object is not conflicting with the setting of svcEndPointIgnoreStandbySig object.
T/F sdpBindTlsBlockOnMeshFail	1.3.6.1.4.1.6527.3.1.2.4.4.6.1.49	TruthValue	read-write	The value of sdpBindTlsBlockOnMeshFail specifies that the operational status of this spoke SDP will consider operational status of associated mesh SDPs in this service. If there are no mesh SDPs in the service, value of this object is ignored. When this object is set to 'true', then the operational status of this spoke SDP will be 'down' until the operational status of atleast one mesh SDP in this service is 'up'. When set to 'false', the operational status of this spoke SDP does not consider the operational status of any mesh SDPs in the service.
sdpBindMeshTlsTable	1.3.6.1.4.1.6527.3.1.2.4.4.7		not-accessible	A table that contains TLS Mesh SDP Bind information.
sdpBindMeshTlsEntry	1.3.6.1.4.1.6527.3.1.2.4.4.7.1		not-accessible	TLS specific information about an Mesh SDP Bind.
TST sdpBindMeshTlsPortState	1.3.6.1.4.1.6527.3.1.2.4.4.7.1.1	TStpPortState	read-only	This object indicates the actual state of the Mesh SDP. If the sdp is operationally down, the port will be in the 'disabled' state. If the sdp is operationally up, the state will be 'forwarding' unless the hold-down timer is active in which case the state will be 'discarding'.
INT sdpBindMeshTlsHoldDownTimer	1.3.6.1.4.1.6527.3.1.2.4.4.7.1.2	INTEGER	read-only	When the hold-down timer is active, all traffic coming from this mesh sdp will be blocked. This timer will be activated for any of the following cases: 1. when a mesh SDP becomes operational; 2. when a 'disputed' BPDU is received over this mesh sdp; This is typically a symptom of one way communication (the peer at the other side of the mesh sdp does not receive our BPDUs). 3. when a MSTP BPDU from outside the region is received over this mesh SDP.
INT sdpBindMeshTlsTransitionState	1.3.6.1.4.1.6527.3.1.2.4.4.7.1.3	INTEGER	read-only	This object indicates whether we already received an agreement from the peer connected via this mesh sdp. RSTP expects an agreement from every peer after sending a proposal over the VCP when it wants to transition the latter to the forwarding state. This object is only relevant when the role of the VCP is 'designated'. Not receiving an agreement is typically caused by an improperly configured sdp or by a non rstp enabled peer.
T/F sdpBindMeshTlsNotInMstRegion	1.3.6.1.4.1.6527.3.1.2.4.4.7.1.4	TruthValue	read-only	This object sdpBindMeshTlsNotInMstRegion indicates whether we received a BPDU from another MST-region on this mesh SDP. If set to 'true' then the object sdpBindMeshTlsHoldDownTimer will have the value 'active'. It is up to the operator to make sure bridges connected via mesh SDPs are in the same MST-region. If not the mesh will NOT become operational.
sdpBindApipeTable	1.3.6.1.4.1.6527.3.1.2.4.4.8		not-accessible	The sdpBindApipeTable has an entry for each apipe sdpBind configured on this system.
sdpBindApipeEntry	1.3.6.1.4.1.6527.3.1.2.4.4.8.1		not-accessible	Each row entry represents a particular sdpBind related to a particular Apipe service entry. Entries are created/deleted by the user.
I32 sdpBindApipeAdminConcatCellCount	1.3.6.1.4.1.6527.3.1.2.4.4.8.1.1	Integer32	read-write	The value of sdpBindApipeAdminConcatCellCount specifies the maximum number of ATM cells to accumulate into an MPLS packet. The remote peer will also signal the maximum number of concatenated cells it is willing to accept in an MPLS packet. When the lesser of (the configured value and the signaled value) number of cells is reached, the MPLS packet is queued for transmission onto the pseudowire.
I32 sdpBindApipeSigConcatCellCount	1.3.6.1.4.1.6527.3.1.2.4.4.8.1.2	Integer32	read-only	The value of sdpBindApipeSigConcatCellCount indicates the maximum number of concatenated ATM cells the remote peer is willing to accept. If there is no remote peer, or if the label mapping has not been received, this object will be zero (0).
I32 sdpBindApipeOperConcatCellCount	1.3.6.1.4.1.6527.3.1.2.4.4.8.1.3	Integer32	read-only	The value of sdpBindApipeOperConcatCellCount indicates the maximum number of concatenated ATM cells that will be sent on this SDP binding.
I32 sdpBindApipeConcatMaxDelay	1.3.6.1.4.1.6527.3.1.2.4.4.8.1.4	Integer32	read-write	The value of sdpBindApipeConcatMaxDelay object specifies the maximum amount of time to wait while performing ATM cell concatenation into an MPLS packet before transmitting the MPLS packet. This places an upper bound on the amount of delay introduced by the concatenation process. When this amount of time is reached from when the first ATM cell for this MPLS packet was received, the MPLS packet is queued for transmission onto the pseudowire.
T/F sdpBindApipeConcatCellClp	1.3.6.1.4.1.6527.3.1.2.4.4.8.1.5	TruthValue	read-write	The value of sdpBindApipeConcatCellClp specifies whether a CLP change should be used as an indication to complete the cell concatenation operation. When the value is 'true', CLP is used to indicate that cell concatenation should be completed.
T/F sdpBindApipeConcatCellAal5Fr	1.3.6.1.4.1.6527.3.1.2.4.4.8.1.6	TruthValue	read-write	The value of sdpBindApipeConcatCellAal5Fr specifies whether the AAL5 EOP (end of packet) should be used as an indication to complete the cell concatenation operation. When the value is 'true', EOP is used to indicate that cell concatenation should be completed.
sdpBindDhcpInfoTable	1.3.6.1.4.1.6527.3.1.2.4.4.9		not-accessible	A table that contains DHCP information related to a SDP Bind. A row will exist in this table for each spoke or mesh SDP in a Tls Service. Rows are created and deleted automatically by the system.
sdpBindDhcpInfoEntry	1.3.6.1.4.1.6527.3.1.2.4.4.9.1		not-accessible	DHCP specific information about an SDP Bind.
SER sdpBindDhcpDescription	1.3.6.1.4.1.6527.3.1.2.4.4.9.1.1	ServObjDesc	read-write	The value of the object sdpBindDhcpDescription specifies a user provided description for DHCP on this Sdp Bind.
TMN sdpBindDhcpSnoop	1.3.6.1.4.1.6527.3.1.2.4.4.9.1.2	TmnxEnabledDisabled	read-write	The value of the object sdpBindDhcpSnoop specifies whether or not DHCP snooping is enabled on the Sdp Bind.
sdpBindDhcpStatsTable	1.3.6.1.4.1.6527.3.1.2.4.4.10		not-accessible	sdpBindDhcpStatsTable contains DHCP statistics related to a TLS SDP Bind. A row will exist in this table for each spoke or mesh SDP in a Tls Service. Rows are created and deleted automatically by the system.
sdpBindDhcpStatsEntry	1.3.6.1.4.1.6527.3.1.2.4.4.10.1		not-accessible	DHCP statistics for a TLS spoke SDP or mesh SDP.
C32 sdpBindDhcpStatsClntSnoopdPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.1	Counter32	read-only	The value of the object sdpBindDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SDP bind.
C32 sdpBindDhcpStatsSrvrSnoopdPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.2	Counter32	read-only	The value of the object sdpBindDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SDP bind.
C32 sdpBindDhcpStatsClntForwdPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.3	Counter32	read-only	The value of the object sdpBindDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SDP bind.
C32 sdpBindDhcpStatsSrvrForwdPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.4	Counter32	read-only	The value of the object sdpBindDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SDP bind.
C32 sdpBindDhcpStatsClntDropdPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.5	Counter32	read-only	The value of the object sdpBindDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SDP bind.
C32 sdpBindDhcpStatsSrvrDropdPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.6	Counter32	read-only	The value of the object sdpBindDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SDP bind.
C32 sdpBindDhcpStatsClntProxRadPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.7	Counter32	read-only	The value of the object sdpBindDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on data received from a RADIUS server.
C32 sdpBindDhcpStatsClntProxLSPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.8	Counter32	read-only	The value of the object sdpBindDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
C32 sdpBindDhcpStatsGenReleasePckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.9	Counter32	read-only	The value of the object sdpBindDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SDP bind to the DHCP server.
C32 sdpBindDhcpStatsGenForceRenPckts	1.3.6.1.4.1.6527.3.1.2.4.4.10.1.10	Counter32	read-only	The value of the object sdpBindDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SDP bind to the DHCP clients.
sdpBindIpipeTable	1.3.6.1.4.1.6527.3.1.2.4.4.11		not-accessible	The sdpBindIpipeTable has an entry for each IPIPE sdpBind configured on this system.
sdpBindIpipeEntry	1.3.6.1.4.1.6527.3.1.2.4.4.11.1		not-accessible	Each row entry represents a particular sdpBind related to a particular IPIPE service entry. Entries are created/deleted by the user.
IPt sdpBindIpipeCeInetAddressType	1.3.6.1.4.1.6527.3.1.2.4.4.11.1.1	InetAddressType	read-write	The value of the object sdpBindIpipeCeInetAddressType specifies the addresstype of the IP address of the CE device reachable throught this IPIPE SDP binding.
IP sdpBindIpipeCeInetAddress	1.3.6.1.4.1.6527.3.1.2.4.4.11.1.2	InetAddress	read-write	The type of this address is determined by the value of the sdpBindIpipeCeInetAddressType object. This object specifies the IPv4 address of the CE device reachable through this SDP binding.
sdpFCMappingTable	1.3.6.1.4.1.6527.3.1.2.4.4.12		not-accessible	The sdpFCMappingTable has an entry for each FC mapping on an SDP configured on this system.
sdpFCMappingEntry	1.3.6.1.4.1.6527.3.1.2.4.4.12.1		not-accessible	Each row entry represents a particular FC to LSP ID mapping on an SDP. Entries are created/deleted by the user.
TNA sdpFCMappingFCName	1.3.6.1.4.1.6527.3.1.2.4.4.12.1.1	TNamedItem	not-accessible	The value of sdpFCMappingFCName specifies the forwarding class for which this mapping is defined, in the SDP indexed by 'sdpId'.
ROW sdpFCMappingRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.12.1.2	RowStatus	read-create	The value of sdpFCMappingRowStatus is used for the creation and deletion of forwarding class to LSP mappings.
TMN sdpFCMappingLspId	1.3.6.1.4.1.6527.3.1.2.4.4.12.1.3	TmnxVRtrMplsLspID	read-create	The value of sdpFCMappingLspId specifies the LSP ID that traffic corresponding to the class specified in sdpFCMappingFCName will be forwarded on. This object MUST be specified at row creation time.
sdpBindTlsMfibAllowedMdaTable	1.3.6.1.4.1.6527.3.1.2.4.4.13		not-accessible	The sdpBindTlsMfibAllowedMdaTable has an entry for each MFIB allowed MDA destination for an SDP Binding configured in the system.
sdpBindTlsMfibAllowedMdaEntry	1.3.6.1.4.1.6527.3.1.2.4.4.13.1		not-accessible	Each row entry represents an MFIB allowed MDA destination for an SDP Binding configured in the system. Entries can be created and deleted via SNMP SET operations on the object sdpBindTlsMfibMdaRowStatus.
ROW sdpBindTlsMfibMdaRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.13.1.1	RowStatus	read-create	The value of sdpBindTlsMfibMdaRowStatus controls the creation and deletion of rows in this table.
sdpBindCpipeTable	1.3.6.1.4.1.6527.3.1.2.4.4.15		not-accessible	The sdpBindCpipeTable has an entry for each cpipe sdpBind configured on this system.
sdpBindCpipeEntry	1.3.6.1.4.1.6527.3.1.2.4.4.15.1		not-accessible	Each row entry represents a particular sdpBind related to a particular Cpipe service entry. Entries are created/deleted by the user.
U32 sdpBindCpipeLocalPayloadSize	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.1	Unsigned32	read-only	This object indicates the local payload size (in bytes).
U32 sdpBindCpipePeerPayloadSize	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.2	Unsigned32	read-only	This object indicates the remote payload size (in bytes). If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0).
U32 sdpBindCpipeLocalBitrate	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.3	Unsigned32	read-only	This object indicates the local bit-rate in multiples of 64 Kbit/s.
U32 sdpBindCpipePeerBitrate	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.4	Unsigned32	read-only	This object indicates the remote bit-rate in multiples of 64 Kbit/s. If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0).
TDM sdpBindCpipeLocalSigPkts	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.5	TdmOptionsSigPkts	read-only	This object indicates the local CE application signalling packets mode.
TDM sdpBindCpipePeerSigPkts	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.6	TdmOptionsSigPkts	read-only	This object indicates the remote CE application signalling packets mode. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support signalling packets then this object will be zero (0).
TDM sdpBindCpipeLocalCasTrunkFraming	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.7	TdmOptionsCasTrunkFraming	read-only	This object indicates the local CAS trunk framing mode.
TDM sdpBindCpipePeerCasTrunkFraming	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.8	TdmOptionsCasTrunkFraming	read-only	This object indicates the remote CAS trunk framing mode. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support CAS trunk framing then this object will be zero (0).
T/F sdpBindCpipeLocalUseRtpHeader	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.9	TruthValue	read-only	This object indicates whether a RTP header is used when packets are transmitted to the remote peer, and the local peer expects a RTP header when packets are received from the remote peer.
T/F sdpBindCpipePeerUseRtpHeader	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.10	TruthValue	read-only	This object indicates whether a RTP header is used when packets are transmitted by the remote peer, and the remote peer expects a RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support RTP headers then this object will be 'false'.
T/F sdpBindCpipeLocalDifferential	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.11	TruthValue	read-only	This object indicates whether differential timestamp mode is used in the RTP header when packets are transmitted to the remote peer, and the local peer expects differential timestamps in the RTP header when packets are received from the remote peer.
T/F sdpBindCpipePeerDifferential	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.12	TruthValue	read-only	This object indicates whether differential timestamp mode is used in the RTP header when packets are transmitted by the remote peer, and the remote peer expects differential timestamps in the RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support differential timestamp mode then this object will be 'false'.
U32 sdpBindCpipeLocalTimestampFreq	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.13	Unsigned32	read-only	This object indicates the timestamp frequency used in the RTP header when packets are transmitted to the remote peer, and the local peer expects same timestamp frequency in the RTP header when packets are received from the remote peer. This value is in multiples of 8 KHz.
U32 sdpBindCpipePeerTimestampFreq	1.3.6.1.4.1.6527.3.1.2.4.4.15.1.14	Unsigned32	read-only	This object indicates the timestamp frequency used in the RTP header when packets are transmitted by the remote peer, and the remote peer expects the same timestamp frequency in the RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support support RTP headers then this object will be zero (0). This value is in multiples of 8 KHz.
sdpBindTlsL2ptStatsTable	1.3.6.1.4.1.6527.3.1.2.4.4.16		not-accessible	A table that contains TLS spoke SDP Bind Layer 2 Protocol Tunneling Statistics. This table complements the sdpBindTlsTable. Rows in this table are created and deleted automatically by the system.
sdpBindTlsL2ptStatsEntry	1.3.6.1.4.1.6527.3.1.2.4.4.16.1		not-accessible	TLS specific information about an SDP Bind.
TIM sdpBindTlsL2ptStatsLastClearedTime	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.1	TimeStamp	read-only	The value of sdpBindTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet.
C32 sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.2	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.3	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.4	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.5	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.6	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.7	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.8	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.9	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.10	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.11	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.12	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.13	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsStpConfigBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.14	Counter32	read-only	The value of sdpBindTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsStpConfigBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.15	Counter32	read-only	The value of sdpBindTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsStpRstBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.16	Counter32	read-only	The value of sdpBindTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsStpRstBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.17	Counter32	read-only	The value of sdpBindTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsStpTcnBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.18	Counter32	read-only	The value of sdpBindTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsStpTcnBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.19	Counter32	read-only	The value of sdpBindTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsPvstConfigBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.20	Counter32	read-only	The value of sdpBindTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsPvstConfigBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.21	Counter32	read-only	The value of sdpBindTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsPvstRstBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.22	Counter32	read-only	The value of sdpBindTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsPvstRstBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.23	Counter32	read-only	The value of sdpBindTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsPvstTcnBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.24	Counter32	read-only	The value of sdpBindTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsPvstTcnBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.25	Counter32	read-only	The value of sdpBindTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsOtherBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.26	Counter32	read-only	The value of sdpBindTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsOtherBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.27	Counter32	read-only	The value of sdpBindTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsOtherL2ptBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.28	Counter32	read-only	The value of sdpBindTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsOtherL2ptBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.29	Counter32	read-only	The value of sdpBindTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsOtherInvalidBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.30	Counter32	read-only	The value of sdpBindTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsOtherInvalidBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.31	Counter32	read-only	The value of sdpBindTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.32	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.33	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.34	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.35	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.36	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.37	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.38	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.39	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.40	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.41	Counter32	read-only	The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsCdpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.42	Counter32	read-only	The value of sdpBindTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsCdpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.43	Counter32	read-only	The value of sdpBindTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsVtpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.44	Counter32	read-only	The value of sdpBindTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsVtpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.45	Counter32	read-only	The value of sdpBindTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsDtpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.46	Counter32	read-only	The value of sdpBindTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsDtpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.47	Counter32	read-only	The value of sdpBindTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsPagpBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.48	Counter32	read-only	The value of sdpBindTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsPagpBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.49	Counter32	read-only	The value of sdpBindTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this spoke SDP.
C32 sdpBindTlsL2ptStatsUdldBpdusRx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.50	Counter32	read-only	The value of sdpBindTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this spoke SDP.
C32 sdpBindTlsL2ptStatsUdldBpdusTx	1.3.6.1.4.1.6527.3.1.2.4.4.16.1.51	Counter32	read-only	The value of sdpBindTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this spoke SDP.
TIM pwTemplateTableLastChanged	1.3.6.1.4.1.6527.3.1.2.4.4.17	TimeStamp	read-only	The value of pwTemplateTableLastChanged indicates the sysUpTime at the time of the last modification of pwTemplateTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
pwTemplateTable	1.3.6.1.4.1.6527.3.1.2.4.4.18		not-accessible	A table that contains entries for pseudowire (PW) templates specifying SDP auto-binding.
pwTemplateEntry	1.3.6.1.4.1.6527.3.1.2.4.4.18.1		not-accessible	Information about a specific PW template.
PWT pwTemplateId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.1	PWTemplateId	not-accessible	The PW template identifier.
ROW pwTemplateRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.2	RowStatus	read-create	The value of pwTemplateRowStatus is used for the creation and deletion of PW templates.
TIM pwTemplateLastChanged	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.3	TimeStamp	read-only	The value of pwTemplateLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
T/F pwTemplateUseProvisionedSdp	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.4	TruthValue	read-create	The value of pwTemplateUseProvisionedSdp specifies whether the to use an already provisioned SDP. A value of 'true' specifies that the tunnel manager will be consulted for an existing active SDP. Otherwise, a value of 'false' specifies that the default SDP template will be used to use for instantiation of the SDP.
SDP pwTemplateVcType	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.5	SdpBindVcType	read-create	The value of pwTemplateVcType specifies the type of virtual circuit (VC) associated with the SDP Bind.
U32 pwTemplateAccountingPolicyId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.6	Unsigned32	read-create	The value of pwTemplateAccountingPolicyId specifies the policy to use to collect accounting statistics on the SDP Bind. The value zero indicates that the agent should use the default accounting policy, if one exists.
T/F pwTemplateCollectAcctStats	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.7	TruthValue	read-create	The value of pwTemplateCollectAcctStats specifies whether the agent collects accounting statistics for the SDP Bind. When the value is 'true' the agent collects accounting statistics on the SDP Bind.
TMN pwTemplateMacLearning	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.8	TmnxEnabledDisabled	read-create	The value of pwTemplateMacLearning specifies whether the MAC learning process is enabled for the SDP Bind. The value is ignored if MAC learning is disabled at service level.
TMN pwTemplateMacAgeing	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.9	TmnxEnabledDisabled	read-create	The value of pwTemplateMacAgeing specifies whether the MAC aging process is enabled for the SDP Bind. The value is ignored if MAC aging is disabled at the service level.
TMN pwTemplateDiscardUnknownSource	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.10	TmnxEnabledDisabled	read-create	With the object pwTemplateMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on the SDP Bind (only for spoke SDPs). When the limit is reached, packets with unknown source MAC address are forwarded by default. By setting sdpBindTlsDiscardUnknownSource to 'enabled', packets with unknown source MAC will be dropped instead.
TLS pwTemplateLimitMacMove	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.11	TlsLimitMacMove	read-create	The value of pwTemplateLimitMacMove specifies the behavior for when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When pwTemplateLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on the SDP Bind, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' the SDP Bind will not be blocked, and another blockable SDP Bind will be blocked instead.
TMN pwTemplateMacPinning	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.12	TmnxEnabledDisabled	read-create	The value of pwTemplateMacPinning specifies whether or not MAC address pinning is active on the SDP Bind (mesh or spoke). Setting the value to 'enabled' disables re-learning of MAC addresses on other SAPs or SDPs within the same VPLS; the MAC address will hence remain attached to the SDP Bind for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP. The value will be set by default to 'disabled'. However for a spoke SDP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator.
U32 pwTemplateVlanVcTag	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.13	Unsigned32	read-create	The value of pwTemplateVlanVcTag specifies the VLAN VC tag for the SDP Bind.
U32 pwTemplateMacAddressLimit	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.14	Unsigned32	read-create	The value of pwTemplateMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for the SDP Bind. The value 0 specifies no limit for the SDP Bind. The command is valid only for spoke SDPs. When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of pwTemplateMacAddressLimit is '131071'.
TNA pwTemplateShgName	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.15	TNamedItemOrEmpty	read-create	The value of pwTemplateShgName specifies the name of the split-horizon group where the spoke SDP Bind belongs to. By default a spoke SDP Bind does not belong to any split-horizon group. The name specified must correspond to an existing split-horizon group in the TLS service where the spoke SDP Bind is defined.
TIT pwTemplateShgDescription	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.16	TItemDescription	read-create	The value of pwTemplateShgDescription specifies a user-provided description for split-horizon group on the SDP Bind.
T/F pwTemplateShgRestProtSrcMac	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.17	TruthValue	read-create	The value of pwTemplateShgRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored.
T/F pwTemplateShgRestUnprotDstMac	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.18	TruthValue	read-create	The value of pwTemplateShgRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped.
TFI pwTemplateEgressMacFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.19	TFilterID	read-create	The value of pwTemplateEgressMacFilterId specifies the tMacFilterId which indexes an egress filter entry in TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is specified.
TFI pwTemplateEgressIpFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.20	TFilterID	read-create	The value of pwTemplateEgressIpFilterId specifies the tIPFilterId which indexes an egress filter entry in TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified.
TFI pwTemplateEgressIpv6FilterId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.21	TFilterID	read-create	The value of pwTemplateEgressIpv6FilterId specifies the tIPv6FilterId which indexes an egress filter entry in TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is specified.
TFI pwTemplateIngressMacFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.22	TFilterID	read-create	The value of pwTemplateIngressMacFilterId specifies the tMacFilterId which indexes an ingress filter entry in TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is specified.
TFI pwTemplateIngressIpFilterId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.23	TFilterID	read-create	The value of pwTemplateIngressIpFilterId specifies the tIPFilterId which indexes an ingress filter entry in TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified.
TFI pwTemplateIngressIpv6FilterId	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.24	TFilterID	read-create	The value of pwTemplateIngressIpv6FilterId specifies the tIPv6FilterId which indexes an ingress filter entry in TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is specified.
TMN pwTemplateIgmpFastLeave	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.25	TmnxEnabledDisabled	read-create	The value of pwTemplateIgmpFastLeave specifies whether or not fastleave is allowed on the SDP Bind. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.
TNA pwTemplateIgmpImportPlcy	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.26	TNamedItemOrEmpty	read-create	The value of pwTemplateIgmpImportPlcy specifies a policy statement that must be applied to all incoming IGMP messages on the SDP Bind.
U32 pwTemplateIgmpLastMembIntvl	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.27	Unsigned32	read-create	The value of pwTemplateIgmpLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
U32 pwTemplateIgmpMaxNbrGrps	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.28	Unsigned32	read-create	The value of pwTemplateIgmpMaxNbrGrps specifies how many group addresses are allowed for the SDP Bind. The value 0 means that no limit is imposed.
U32 pwTemplateIgmpGenQueryIntvl	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.29	Unsigned32	read-create	The value of pwTemplateIgmpGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on the SDP. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'.
U32 pwTemplateIgmpQueryRespIntvl	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.30	Unsigned32	read-create	The value of pwTemplateIgmpQueryRespIntvl specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'.
U32 pwTemplateIgmpRobustCount	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.31	Unsigned32	read-create	The value of pwTemplateIgmpRobustCount specifies the value of the Robust count. This object allows tuning for the expected packet loss on the SDP. If an SDP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'.
TMN pwTemplateIgmpSendQueries	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.32	TmnxEnabledDisabled	read-create	The value of pwTemplateIgmpSendQueries specifies whether the system generates General Queries by itself on the SDP.
TPO pwTemplateIgmpMcacPolicyName	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.33	TPolicyStatementNameOrEmpty	read-create	The value of pwTemplateIgmpMcacPolicyName indicates the name of the multicast CAC policy.
I32 pwTemplateIgmpMcacUnconstBW	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.34	Integer32	read-create	The value of pwTemplateIgmpMcacUnconstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of pwTemplateIgmpMcacUnconstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.
I32 pwTemplateIgmpMcacPrRsvMndBW	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.35	Integer32	read-create	The value of pwTemplateIgmpMcacPrRsvMndBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of pwTemplateIgmpMcacUnconstBW is '0', no mandatory channels are allowed. If the value of pwTemplateIgmpMcacUnconstBW is '-1', then all mandatory and optional channels are allowed. If the value of pwTemplateIgmpMcacPrRsvMndBW is equal to the value of pwTemplateIgmpMcacUnconstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of pwTemplateIgmpMcacPrRsvMndBW should always be less than or equal to that of pwTemplateIgmpMcacUnconstBW. An attempt to set the value of pwTemplateIgmpMcacPrRsvMndBW greater than that of pwTemplateIgmpMcacUnconstBW will result in 'inconsistentValue' error.
TMN pwTemplateIgmpVersion	1.3.6.1.4.1.6527.3.1.2.4.4.18.1.36	TmnxIgmpVersion	read-create	The value of pwTemplateIgmpVersion specifies the version of IGMP for the PW template.
TIM pwTemplateIgmpSnpgGrpSrcTblLC	1.3.6.1.4.1.6527.3.1.2.4.4.19	TimeStamp	read-only	The value of pwTemplateIgmpSnpgGrpSrcTblLC indicates the sysUpTime at the time of the last modification of pwTemplateIgmpSnpgGrpSrcTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
pwTemplateIgmpSnpgGrpSrcTable	1.3.6.1.4.1.6527.3.1.2.4.4.20		not-accessible	A table that contains entries for static IGMP Snooping groups.
pwTemplateIgmpSnpgGrpSrcEntry	1.3.6.1.4.1.6527.3.1.2.4.4.20.1		not-accessible	Information about a specific static IGMP Snooping groups.
IPt pwTemplateIgmpSnpgGrpAddrType	1.3.6.1.4.1.6527.3.1.2.4.4.20.1.1	InetAddressType	not-accessible	The IP multicast group address type for this entry.
IP pwTemplateIgmpSnpgGrpAddr	1.3.6.1.4.1.6527.3.1.2.4.4.20.1.2	InetAddress	not-accessible	The IP multicast group address for this entry.
IPt pwTemplateIgmpSnpgSrcAddrType	1.3.6.1.4.1.6527.3.1.2.4.4.20.1.3	InetAddressType	not-accessible	The source address type for this entry.
IP pwTemplateIgmpSnpgSrcAddr	1.3.6.1.4.1.6527.3.1.2.4.4.20.1.4	InetAddress	not-accessible	The source address for this entry.
ROW pwTemplateIgmpSnpgRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.20.1.5	RowStatus	read-create	The value of pwTemplateIgmpSnpgRowStatus is used for the creation and deletion of static IGMP snooping entries.
TIM pwTemplateIgmpSnpgLastChngd	1.3.6.1.4.1.6527.3.1.2.4.4.20.1.6	TimeStamp	read-only	The value of pwTemplateIgmpSnpgLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM pwTemplateMfibAllowedMdaTblLC	1.3.6.1.4.1.6527.3.1.2.4.4.21	TimeStamp	read-only	The value of pwTemplateMfibAllowedMdaTblLC indicates the sysUpTime at the time of the last modification of pwTemplateMfibAllowedMdaTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
pwTemplateMfibAllowedMdaTable	1.3.6.1.4.1.6527.3.1.2.4.4.22		not-accessible	The pwTemplateMfibAllowedMdaTable has an entry for each MFIB allowed MDA destination for an PW template.
pwTemplateMfibAllowedMdaEntry	1.3.6.1.4.1.6527.3.1.2.4.4.22.1		not-accessible	Each row entry represents an MFIB allowed MDA destination for an PW template configured in the system. Entries can be created and deleted via SNMP SET operations on the object pwTemplateMfibMdaRowStatus.
ROW pwTemplateMfibMdaRowStatus	1.3.6.1.4.1.6527.3.1.2.4.4.22.1.1	RowStatus	read-create	The value of pwTemplateMfibMdaRowStatus controls the creation and deletion of rows in this table.
TIM sdpBindTlsMrpTableLastChanged	1.3.6.1.4.1.6527.3.1.2.4.4.23	TimeStamp	read-only	The value of sdpBindTlsMrpTableLastChanged indicates the sysUpTime at the time of the last modification of sdpBindTlsMrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
sdpBindTlsMrpTable	1.3.6.1.4.1.6527.3.1.2.4.4.24		not-accessible	The sdpBindTlsMrpTable allows the operator to modify attributes of the Multiple Registration Protocol (MRP) feature for the TLS SDP Bind. This table contains an entry for each TLS SDP Bind created by the user using either sdpBindTlsTable or sdpBindMeshTlsTable. Rows in this table are created and deleted automatically by the system.
sdpBindTlsMrpEntry	1.3.6.1.4.1.6527.3.1.2.4.4.24.1		not-accessible	Each row entry contains objects that allows the modification of the Multiple Registration Protocol feature for a specific SDP-Binding in a TLS service.
TIM sdpBindTlsMrpLastChngd	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.1	TimeStamp	read-only	The value of sdpBindTlsMrpLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 sdpBindTlsMrpJoinTime	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.2	Unsigned32	read-write	The value of sdpBindTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SDP.
U32 sdpBindTlsMrpLeaveTime	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.3	Unsigned32	read-write	The value of sdpBindTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed.
U32 sdpBindTlsMrpLeaveAllTime	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.4	Unsigned32	read-write	The value of sdpBindTlsMrpLeaveAllTime specifies a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SDP are all refreshed.
U32 sdpBindTlsMrpPeriodicTime	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.5	Unsigned32	read-write	The value of sdpBindTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of re-transmission of attribute declarations.
T/F sdpBindTlsMrpPeriodicEnabled	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.6	TruthValue	read-write	The value of sdpBindTlsMrpPeriodicEnabled specifies whether re-transmission of attribute declarations is enabled.
C32 sdpBindTlsMrpRxPdus	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.7	Counter32	read-only	The value of sdpBindTlsMrpRxPdus indicates the number of MRP packets received on this SDP Bind.
C32 sdpBindTlsMrpDroppedPdus	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.8	Counter32	read-only	The value of sdpBindTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SDP Bind.
C32 sdpBindTlsMrpTxPdus	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.9	Counter32	read-only	The value of sdpBindTlsMrpTxPdus indicates the number of MRP packets transmitted on this SDP Bind.
C32 sdpBindTlsMrpRxNewEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.10	Counter32	read-only	The value of sdpBindTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SDP Bind.
C32 sdpBindTlsMrpRxJoinInEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.11	Counter32	read-only	The value of sdpBindTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SDP Bind.
C32 sdpBindTlsMrpRxInEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.12	Counter32	read-only	The value of sdpBindTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SDP Bind.
C32 sdpBindTlsMrpRxJoinEmptyEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.13	Counter32	read-only	The value of sdpBindTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SDP Bind.
C32 sdpBindTlsMrpRxEmptyEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.14	Counter32	read-only	The value of sdpBindTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SDP Bind.
C32 sdpBindTlsMrpRxLeaveEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.15	Counter32	read-only	The value of sdpBindTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SDP Bind.
C32 sdpBindTlsMrpTxNewEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.16	Counter32	read-only	The value of sdpBindTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SDP Bind.
C32 sdpBindTlsMrpTxJoinInEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.17	Counter32	read-only	The value of sdpBindTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SDP Bind.
C32 sdpBindTlsMrpTxInEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.18	Counter32	read-only	The value of sdpBindTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SDP Bind.
C32 sdpBindTlsMrpTxJoinEmptyEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.19	Counter32	read-only	The value of sdpBindTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SDP Bind.
C32 sdpBindTlsMrpTxEmptyEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.20	Counter32	read-only	The value of sdpBindTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SDP Bind.
C32 sdpBindTlsMrpTxLeaveEvent	1.3.6.1.4.1.6527.3.1.2.4.4.24.1.21	Counter32	read-only	The value of sdpBindTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SDP Bind.
sdpBindTlsMmrpTable	1.3.6.1.4.1.6527.3.1.2.4.4.25		not-accessible	This table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SDP Bind for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP.
sdpBindTlsMmrpEntry	1.3.6.1.4.1.6527.3.1.2.4.4.25.1		not-accessible	MMRP specific information about a MAC address managed by MMRP on a SDP Bind in a TLS.
MAC sdpBindTlsMmrpMacAddr	1.3.6.1.4.1.6527.3.1.2.4.4.25.1.1	MacAddress	not-accessible	The value of sdpBindTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP.
T/F sdpBindTlsMmrpDeclared	1.3.6.1.4.1.6527.3.1.2.4.4.25.1.2	TruthValue	read-only	The value of sdpBindTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP.
T/F sdpBindTlsMmrpRegistered	1.3.6.1.4.1.6527.3.1.2.4.4.25.1.3	TruthValue	read-only	The value of sdpBindTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address.
TIM sdpAutoBindBgpInfoTableLC	1.3.6.1.4.1.6527.3.1.2.4.4.26	TimeStamp	read-only	The value of sdpAutoBindBgpInfoTableLC indicates the sysUpTime at the time of the last modification of sdpAutoBindBgpInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
sdpAutoBindBgpInfoTable	1.3.6.1.4.1.6527.3.1.2.4.4.27		not-accessible	The sdpAutoBindBgpInfoTable has an entry for each SDP Bind entry from sdpBindTable which was created as a result of BGP Auto-discovery.
sdpAutoBindBgpInfoEntry	1.3.6.1.4.1.6527.3.1.2.4.4.27.1		not-accessible	Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP Auto-discovery.
PWT sdpAutoBindBgpInfoTemplateId	1.3.6.1.4.1.6527.3.1.2.4.4.27.1.1	PWTemplateId	read-only	The value of sdpAutoBindBgpInfoTemplateId indicates the the value of the pwTemplateId object for the PW template entry used to create this SDP Bind.
TMN sdpAutoBindBgpInfoAGI	1.3.6.1.4.1.6527.3.1.2.4.4.27.1.2	TmnxVPNRouteDistinguisher	read-only	The value of sdpAutoBindBgpInfoAGI indicates the Attachment Group Indentifier (AGI) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.
U32 sdpAutoBindBgpInfoSAII	1.3.6.1.4.1.6527.3.1.2.4.4.27.1.3	Unsigned32	read-only	The value of sdpAutoBindBgpInfoSAII indicates the Source Attachment Individual Indentifier (SAII) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.
U32 sdpAutoBindBgpInfoTAII	1.3.6.1.4.1.6527.3.1.2.4.4.27.1.4	Unsigned32	read-only	The value of sdpAutoBindBgpInfoTAII indicates the Target Attachment Individual Indentifier (TAII) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.
tmnxSdpNotifyObjs	1.3.6.1.4.1.6527.3.1.2.4.4.100
SDP sdpNotifySdpId	1.3.6.1.4.1.6527.3.1.2.4.4.100.1	SdpId	accessible-for-notify	The ID of the SDP where SDP Bindings are associated. This object is used by the sdpBindSdpStateChangeProcessed notification to indicate the SDP that changed state and that resulted in having the associated sdpBindStatusChanged events suppressed for all SDP Bindings on that SDP.
CON dynamicSdpStatus	1.3.6.1.4.1.6527.3.1.2.4.4.100.2	ConfigStatus	accessible-for-notify	The value of dynamicSdpStatus indicates the status of the dynamic SDP which is used by the dynamicSdpConfigChanged and dynamicSdpBindConfigChanged notifications to indicate what state the dynamic SDP or SDP Bind has entered: 'created', 'modified', or 'deleted'.
L2R dynamicSdpOrigin	1.3.6.1.4.1.6527.3.1.2.4.4.100.3	L2RouteOrigin	accessible-for-notify	The value of dynamicSdpOrigin indicates the origin of the dynamic SDP. The origin indicates the protocol or mechanism that created the dynamic SDP.
STR dynamicSdpCreationError	1.3.6.1.4.1.6527.3.1.2.4.4.100.4	DisplayString	accessible-for-notify	The value of the object dynamicSdpCreationError indicates the reason why the system was unable to create the dynamic SDP.
STR dynamicSdpBindCreationError	1.3.6.1.4.1.6527.3.1.2.4.4.100.5	DisplayString	accessible-for-notify	The value of the object dynamicSdpBindCreationError indicates the reason why the system was unable to create the dynamic SDP Binding.
sdpTrapsPrefix	1.3.6.1.4.1.6527.3.1.3.4.4
sdpTraps	1.3.6.1.4.1.6527.3.1.3.4.4.0
NTF sdpCreated	1.3.6.1.4.1.6527.3.1.3.4.4.0.1			The sdpCreated notification is sent when a new row is created in the sdpInfoTable.
NTF sdpDeleted	1.3.6.1.4.1.6527.3.1.3.4.4.0.2			The sdpDeleted notification is sent when an existing row is deleted from the ng row is deleted from the sdpInfoTable.
NTF sdpStatusChanged	1.3.6.1.4.1.6527.3.1.3.4.4.0.3			The sdpStatusChanged notification is generated when there is a change in the administrative or operating status of an SDP.
NTF sdpBindCreated	1.3.6.1.4.1.6527.3.1.3.4.4.0.4			The sdpBindCreated notification is sent when a new row is created in the sdpBindTable.
NTF sdpBindDeleted	1.3.6.1.4.1.6527.3.1.3.4.4.0.5			The sdpBindDeleted notification is sent when an existing row is deleted from the sdpBindTable.
NTF sdpBindStatusChanged	1.3.6.1.4.1.6527.3.1.3.4.4.0.6			The sdpBindStatusChanged notification is generated when there is a change in the administrative or operating status of an SDP Binding. Notice that this trap is not generated whenever the SDP Binding operating status change is caused by an operating status change on the associated SDP.
NTF sdpTlsMacAddrLimitAlarmRaised	1.3.6.1.4.1.6527.3.1.3.4.4.0.7			The sdpTlsMacAddrLimitAlarmRaised notification is sent whenever the number of MAC addresses stored in the FDB for this spoke sdp increases to reach the watermark specified by the object svcTlsFdbTableFullHighWatermark.
NTF sdpTlsMacAddrLimitAlarmCleared	1.3.6.1.4.1.6527.3.1.3.4.4.0.8			The sdpTlsMacAddrLimitAlarmCleared notification is sent whenever the number of MAC addresses stored in the FDB for this spoke SDP drops to the watermark specified by the object svcTlsFdbTableFullLowWatermark.
NTF sdpTlsDHCPSuspiciousPcktRcvd	1.3.6.1.4.1.6527.3.1.3.4.4.0.9			The sdpTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
NTF sdpBindDHCPLeaseEntriesExceeded	1.3.6.1.4.1.6527.3.1.3.4.4.0.10			The sdpBindDHCPLeaseEntriesExceeded notification is generated when the number of DHCP lease state entries on a given IES or VRPN spoke-SDP reaches the user configurable upper limit given by TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate.
NTF sdpBindDHCPLseStateOverride	1.3.6.1.4.1.6527.3.1.3.4.4.0.11			The sdpBindDHCPLseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address. This trap is only applicable for IES and VPRN spoke-SDPs.
NTF sdpBindDHCPSuspiciousPcktRcvd	1.3.6.1.4.1.6527.3.1.3.4.4.0.12			The sdpBindDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
NTF sdpBindDHCPLseStatePopulateErr	1.3.6.1.4.1.6527.3.1.3.4.4.0.13			The sdpBindDHCPLseStatePopulateErr notification indicates that the system was unable to update the DHCP Lease State table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded. This trap is only applicable for IES and VPRN spoke-SDPs.
NTF sdpBindPwPeerStatusBitsChanged	1.3.6.1.4.1.6527.3.1.3.4.4.0.14			The sdpBindPwPeerStatusBitsChanged notification is generated when there is a change in the PW status bits received from the peer.
NTF sdpBindTlsMacMoveExceeded	1.3.6.1.4.1.6527.3.1.3.4.4.0.15			The sdpBindTlsMacMoveExceeded notification is generated when the SDP exceeds the TLS svcTlsMacMoveMaxRate.
NTF sdpBindPwPeerFaultAddrChanged	1.3.6.1.4.1.6527.3.1.3.4.4.0.16			The sdpBindPwPeerFaultAddrChanged notification is generated when there is a change in the IP address included in the PW status message sent by the peer. This notification is only generated if the IP address is the only information in the notification that changed. If the status bits changed as well, then the sdpBindPwPeerStatusBitsChanged notification will be generated instead.
NTF sdpBindDHCPProxyServerError	1.3.6.1.4.1.6527.3.1.3.4.4.0.17			The sdpBindDHCPProxyServerError notification indicates that the system was unable to proxy DHCP requests.
NTF sdpBindDHCPCoAError	1.3.6.1.4.1.6527.3.1.3.4.4.0.18			The sdpBindDHCPCoAError notification indicates that the system was unable to process a Change of Authorization (CoA) request from a Radius server.
NTF sdpBindDHCPSubAuthError	1.3.6.1.4.1.6527.3.1.3.4.4.0.19			The sdpBindDHCPSubAuthError notification indicates that the system encountered a problem while trying to authenticate a subscriber.
NTF sdpBindSdpStateChangeProcessed	1.3.6.1.4.1.6527.3.1.3.4.4.0.20			The sdpBindSdpStateChangeProcessed notification indicates that the agent has finished processing an SDP state change event, and that the operating status of all the affected SDP Bindings has been updated accordingly. The value of the sdpNotifySdpId object indicates the SDP that experienced the state change.
NTF sdpBindDHCPLseStateMobilityErr	1.3.6.1.4.1.6527.3.1.3.4.4.0.21			The sdpBindDHCPLseStateMobilityErr notification indicates that the system was unable to perform a mobility check for this lease state.
NTF sdpBandwidthOverbooked	1.3.6.1.4.1.6527.3.1.3.4.4.0.22			The sdpBandwidthOverbooked notification indicates that the bandwidth that has been allocated to the SDP bindings indicated by sdpBookedBandwidth exceeds sdpMaxBookableBandwidth.
NTF sdpBindInsufficientBandwidth	1.3.6.1.4.1.6527.3.1.3.4.4.0.23			The sdpBindInsufficientBandwidth notification indicates that the available bandwidth of the SDP is insufficient to satisfy the bandwidth requirement specified by sdpBindAdminBandwidth of this SDP binding.
NTF dynamicSdpConfigChanged	1.3.6.1.4.1.6527.3.1.3.4.4.0.24			The dynamicSdpConfigChanged notification is generated when a dynamic SDP is 'created', 'modified', or 'deleted', with the value of dynamicSdpStatus indicated which state it has entered.
NTF dynamicSdpBindConfigChanged	1.3.6.1.4.1.6527.3.1.3.4.4.0.25			The dynamicSdpBindConfigChanged notification is generated when a dynamic SDP Bind is 'created', 'modified', or 'deleted', with the value of dynamicSdpStatus indicated which state it has entered.
NTF dynamicSdpCreationFailed	1.3.6.1.4.1.6527.3.1.3.4.4.0.26			The dynamicSdpCreationFailed notification is generated when the system fails to create a dynamic SDP.
NTF dynamicSdpBindCreationFailed	1.3.6.1.4.1.6527.3.1.3.4.4.0.27			The dynamicSdpBindCreationFailed notification is generated when the system fails to create a dynamic SDP Bind.
NTF unacknowledgedTCN	1.3.6.1.4.1.6527.3.1.3.4.5.0.8			The unacknowledgedTCN notification is generated when a TCN sent towards the root bridge on the root port (SAP or SDP binding) has not been acknowledged within the allowed time. A portion of the spanning tree topology may not have been notified that a topology change has taken place. FDB tables on some devices may take significantly longer to represent the new distribution of layer-2 addresses. Examine this device and devices towards the root bridge for STP issues.
NTF tmnxSvcTopoChgSdpBindMajorState	1.3.6.1.4.1.6527.3.1.3.4.5.0.14			The tmnxSvcTopoChgSdpBindMajorState notification is generated when a SDP binding has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified. It may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
NTF tmnxSvcNewRootSdpBind	1.3.6.1.4.1.6527.3.1.3.4.5.0.15			The tmnxSvcNewRootSdpBind notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. The new root bridge creates a new spanning tree topology. It may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
NTF tmnxSvcTopoChgSdpBindState	1.3.6.1.4.1.6527.3.1.3.4.5.0.16			The tmnxSvcTopoChgSdpBindState notification is generated when a SDP binding has transitioned state to blocking or broken from learning state. This event complements what is not covered by tmnxSvcTopoChgSdpBindMajorState. The spanning tree topology has been modified. It may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
NTF tmnxSvcSdpBindRcvdTCN	1.3.6.1.4.1.6527.3.1.3.4.5.0.17			The tmnxSvcSdpBindRcvdTCN notification is generated when a SDP binding has received TCN from another bridge. This bridge will either have its configured BPDU with the topology change flag set if it is a root bridge, or it will pass TCN to its root bridge. Eventually the address aging timer for the forwarding database will be made shorter for a short period of time. No recovery is needed.
NTF tmnxSvcSdpBindRcvdHigherBriPrio	1.3.6.1.4.1.6527.3.1.3.4.5.0.18			The tmnxSvcSdpBindRcvdHigherBriPrio notification is generated when a customer's device has been configured with a bridge priority equal to zero. The SDP binding that the customer's device is connected through will be blocked. Remove the customer's device or reconfigure the customer's bridge priority with value greater than zero.
NTF tmnxSvcSdpBindEncapPVST	1.3.6.1.4.1.6527.3.1.3.4.5.0.19			The tmnxSvcSdpBindEncapPVST notification is generated when an SDP bindings STP received a BPDU that was PVST encapsulated. The SDP binding STP's BPDUs will be PVST encapsulated. No recovery is needed.
NTF tmnxSvcSdpBindEncapDot1d	1.3.6.1.4.1.6527.3.1.3.4.5.0.20			The tmnxSvcSdpBindEncapDot1d notification is generated when a SDP binding received a BPDU that was 802.1d encapsulated. The SDP binding BPDUs will also be 802.1d encapsulated. No recovery is needed.
NTF tmnxSvcSdpActiveProtocolChange	1.3.6.1.4.1.6527.3.1.3.4.5.0.31			The tmnxSvcSdpActiveProtocolChange notification is generated when the spanning tree protocol on this SDP changes from rstp to stp or vise versa. No recovery is needed.
NTF tmnxStpMeshNotInMstRegion	1.3.6.1.4.1.6527.3.1.3.4.5.0.36			The tmnxStpMeshNotInMstRegion notification is generated when a MSTP BPDU from outside the MST region is received on the indicated mesh SDP. It is up to the operator to make sure bridges connected via mesh SDPs are in the same MST-region. If not the mesh will NOT become operational.
NTF tmnxSdpBndStpExcepCondStateChng	1.3.6.1.4.1.6527.3.1.3.4.5.0.38			The tmnxSdpBndStpExcepCondStateChng notification is generated when the value of the object sdpBindTlsStpException has changed, i.e. when the exception condition changes on the indicated SDP Bind.

RFC description

Nokia SROS Service Distribution Point MIB defining managed objects for service provisioning and configuration on Nokia service routers.

Start monitoring Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-SDP-MIB