TIMETRA-SDP-MIB :: sdpBindTlsStpAdminPointToPoint

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-SDP-MIBsdpBindTlsStpAdminPointToPoint

sdpBindTlsStpAdminPointToPoint

Module: TIMETRA-SDP-MIB

OID (symbolic): TIMETRA-SDP-MIB::sdpBindTlsStpAdminPointToPoint

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value of the object xx sdpBindTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sdp. A value of 'forceTrue' indicates that this port should always be treated as if it is connected to a point-to-point link. A value of 'forceFalse' indicates that this port should be treated as having a shared media connection.

What is sdpBindTlsStpAdminPointToPoint?

This object manually controls whether a Spanning Tree Protocol (STP) port connected via a Service Distribution Point is treated as a point-to-point link or a shared-media segment. Setting this to 'forceTrue' speeds up STP convergence since point-to-point links can use rapid transitions, while 'forceFalse' applies shared-media rules. An operator uses this to optimize layer-2 topology behavior and convergence times when VLAN transparency is enabled over service tunnels.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25
snmpwalk -v2c -c public <target> TIMETRA-SDP-MIB::sdpBindTlsStpAdminPointToPoint

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25.1
snmpget -v2c -c public <target> TIMETRA-SDP-MIB::sdpBindTlsStpAdminPointToPoint.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25.1 i <value>

Start monitoring Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-SDP-MIB::sdpBindTlsStpAdminPointToPoint OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.4tmnxSdpObjsALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.6sdpBindTlsTableALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.6.1sdpBindTlsEntryALCATEL-IND1-TIMETRA-SDP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25sdpBindTlsStpAdminPointToPointTIMETRA-SDP-MIB