NMS-EPON-ONU

All MIBs › NMS-EPON-ONU

Description: MIB for ONU identity, vendor ID, hardware and software versions, and LLID associations in NMS EPON optical access networks

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-EPON-ONU?

NMS-EPON-ONU is a MIB used to manage Optical Network Units (ONUs) in EPON (Ethernet Passive Optical Network) access deployments, covering ONU identity, vendor identification, hardware and software version, and LLID (Logical Link ID) association data. It exposes identity and inventory-style data for each ONU on a PON, including which vendor manufactured the unit and which LLID(s) it is associated with on the shared fiber. Searching for NMS-EPON-ONU MIB details typically surfaces the per-ONU vendor, hardware/software version, and LLID association objects described above. In monitoring terms its primary value is software/hardware inventory tracking - confirming an ONU's hardware revision and firmware/software version, and validating that it is correctly registered/associated to its OLT port via LLID - functioning as a lightweight asset and provisioning-status check rather than a deep performance-counter MIB. No module description or sample objects were available to confirm dependency on other standard PON MIBs, though EPON MIBs of this style typically build on IEEE 802.3ah conventions for the underlying link layer. It is deployed by access-network operators managing EPON OLT/ONU deployments for residential or business fiber broadband service.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-EPON-ONU. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NMS Communications EPON ONU (Optical Network Unit)
NMS Communications EPON OLT/access network equipment

Monitoring Examples

No specific object or table names were provided in the source data for this module; based on its description, an operator would typically poll per-ONU identity objects to confirm hardware and software/firmware version strings and LLID association match expected values, flagging a mismatch as a provisioning or firmware-upgrade issue.

What Can Be Monitored

ONU vendor identity
ONU hardware version
ONU software/firmware version
LLID association
ONU registration status

Imported Objects

From INET-ADDRESS-MIB

InetAddressIPv6

From NMS-EPON-LLID

llidIfIndex

OBJECT-TYPE

From NMS-SMI

nmsEPONGroup

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString

From SNMPv2-TC

MacAddress
PhysAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using rxPower OID:

Select an EPON ONU (Optical Network Unit) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rxPower into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the ONU's CATV module received optical power, in units of 0.1 dBm. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the received power falls below -100 (i.e. -10.0 dBm), which typically indicates a degrading fiber link or connector. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
nmsEponOnu	1.3.6.1.4.1.11606.10.101.10
nmsepononuTable	1.3.6.1.4.1.11606.10.101.10.1		not-accessible	A list of epon ONU and LLID table entries.
nmsEponOnuEntry	1.3.6.1.4.1.11606.10.101.10.1.1		not-accessible	A collection of additional objects in the epon ONU and LLID table.
STR onuVendorID	1.3.6.1.4.1.11606.10.101.10.1.1.1	DisplayString	read-only	ONU vendor id.
STR onuModuleID	1.3.6.1.4.1.11606.10.101.10.1.1.2	DisplayString	read-only	ONU module id.
PHY onuID	1.3.6.1.4.1.11606.10.101.10.1.1.3	PhysAddress	read-only	ONU id.This value is ONU MAC address.
STR onuHardwareVersion	1.3.6.1.4.1.11606.10.101.10.1.1.4	DisplayString	read-only	ONU hardware version.
STR onuSoftwareVersion	1.3.6.1.4.1.11606.10.101.10.1.1.5	DisplayString	read-only	ONU hardware version.
STR onuFirmwareVersion	1.3.6.1.4.1.11606.10.101.10.1.1.6	DisplayString	read-only	ONU firmware version.
STR onuChipVendorID	1.3.6.1.4.1.11606.10.101.10.1.1.7	DisplayString	read-only	ONU chip vendor id.
STR onuChipModuleID	1.3.6.1.4.1.11606.10.101.10.1.1.8	DisplayString	read-only	ONU chip module id.
STR onuChipRevision	1.3.6.1.4.1.11606.10.101.10.1.1.9	DisplayString	read-only	ONU chip revision.
STR onuIcVersion	1.3.6.1.4.1.11606.10.101.10.1.1.10	DisplayString	read-only	ONU chip revision.
OCT onuServiceSupported	1.3.6.1.4.1.11606.10.101.10.1.1.11	OCTET STRING	read-only	ONU service type supported.The format is bitmap.bit0=1:support 1000M ethernet interface; bit0=0:do not suport gigaethernet interface;bit1=1:support 100M ethernet interface but 1000M is not supported bit1=0:do not support 100M ethernet interface;bit2=1:support VoIP service;bit2=0:do not support VoIP service; bit3=1:support TDM CES service;bit3=0:do not support TDM CES service;bit4=1:support ADSL2+ service; bit4=0:do not support ADSL2+ service; bit5=0:support VDSL2 service;bit5=1:do not support VDSL2 service;
INT onuGePortCount	1.3.6.1.4.1.11606.10.101.10.1.1.12	INTEGER	read-only	ONU 1000M ethernet UNI port count.
OCT onuGePortDistributing	1.3.6.1.4.1.11606.10.101.10.1.1.13	OCTET STRING	read-only	ONU 1000M ethernet UNI port bitmaps.There are totaly 8 bit strings, each bit means the bandwidth of corresponding port.So 64 ports can be described.0 means 100M,1 means 1000M.
INT onuFePortCount	1.3.6.1.4.1.11606.10.101.10.1.1.14	INTEGER	read-only	ONU 100M ethernet UNI port count.
OCT onuFePortDistributing	1.3.6.1.4.1.11606.10.101.10.1.1.15	OCTET STRING	read-only	ONU 1000M ethernet UNI port bitmaps.There are totaly 8 bit strings, each bit means the bandwidth of corresponding port.So 64 ports can be described.0 means 100M,1 means 1000M.
INT onuPotsPortCount	1.3.6.1.4.1.11606.10.101.10.1.1.16	INTEGER	read-only	ONU IAD POTS port count.
INT onuE1PortCount	1.3.6.1.4.1.11606.10.101.10.1.1.17	INTEGER	read-only	ONU E1 port count.
INT onuUsQueueCount	1.3.6.1.4.1.11606.10.101.10.1.1.18	INTEGER	read-only	ONU upstream queues count.
INT onuUsQueueMaxCount	1.3.6.1.4.1.11606.10.101.10.1.1.19	INTEGER	read-only	ONU upstream queues maximum count of per port.
INT onuDsQueueCount	1.3.6.1.4.1.11606.10.101.10.1.1.20	INTEGER	read-only	ONU downstream queues count.
INT onuDsQueueMaxCount	1.3.6.1.4.1.11606.10.101.10.1.1.21	INTEGER	read-only	ONU downstream queues maximum count of per port.
INT onuIsBakupBattery	1.3.6.1.4.1.11606.10.101.10.1.1.22	INTEGER	read-only	If ONU have bakup battery or not.
INT onuADSL2PlusPortCount	1.3.6.1.4.1.11606.10.101.10.1.1.23	INTEGER	read-only	Number of ADSL2+ port.
INT onuVDSL2PortCount	1.3.6.1.4.1.11606.10.101.10.1.1.24	INTEGER	read-only	Number of VDSL2 port.
INT onuLLIDCount	1.3.6.1.4.1.11606.10.101.10.1.1.25	INTEGER	read-only	Number of LLID. ONU notify OLT whether the multi-LLID mode is supported or not.
INT onuStatus	1.3.6.1.4.1.11606.10.101.10.1.1.26	INTEGER	read-only	ONU Status. 0-authenticated, 1-registered, 2-deregistered, auto-config(3), lost(4), standby(5).
INT onuDistance	1.3.6.1.4.1.11606.10.101.10.1.1.27	INTEGER	read-only	Disatance between OLT and ONU.
INT onuBindStatus	1.3.6.1.4.1.11606.10.101.10.1.1.28	INTEGER	read-write	ONU bind status. 0-static, 1-dynamic.
INT onuReset	1.3.6.1.4.1.11606.10.101.10.1.1.29	INTEGER	write-only	ONU reset operation. 0-reset, 1-no-reset.
OCT onuUpdateImage	1.3.6.1.4.1.11606.10.101.10.1.1.30	OCTET STRING	write-only	ONU update image name.
OCT onuUpdateEepromImage	1.3.6.1.4.1.11606.10.101.10.1.1.31	OCTET STRING	write-only	ONU update eeprom image name.
T/F onuEncryptionStatus	1.3.6.1.4.1.11606.10.101.10.1.1.32	TruthValue	read-write	Global-level encryption enable or disable for an ONU..
INT onuEncryptionMode	1.3.6.1.4.1.11606.10.101.10.1.1.33	INTEGER	read-write	Global-level encryption mode for an ONU.
T/F onuIgmpSnoopingStatus	1.3.6.1.4.1.11606.10.101.10.1.1.34	TruthValue	read-write	Enables or disables ONU multicast.
INT onuMcstMode	1.3.6.1.4.1.11606.10.101.10.1.1.35	INTEGER	read-write	Config multicast mode.0-IGMP Snooping, 1-CTC dynamic controllable multicast.Only igmp-snooping is supported currently.
INT onuAFastLeaveAbility	1.3.6.1.4.1.11606.10.101.10.1.1.36	INTEGER	read-only	Definition of ONU a fast-leave ability.multicast-non-fast-leave(0),igmp-snooping-fast-leave(1), controlable-multicast-non-fast-leave(2),controlable-multicast-fast-leave(3)
INT onuAcFastLeaveAdminControl	1.3.6.1.4.1.11606.10.101.10.1.1.37	INTEGER	write-only	Activating a fast-leave ability. deactivate-Fast-Leave-Function(1), activate-Fast-Leave-Function(2)
INT onuAFastLeaveAdminState	1.3.6.1.4.1.11606.10.101.10.1.1.38	INTEGER	read-only	ONU multicast fast-leave ability. disable(1), enable(2).
T/F onuInFecStatus	1.3.6.1.4.1.11606.10.101.10.1.1.39	TruthValue	read-write	ONU receiving FEC status.
T/F onuOutFecStatus	1.3.6.1.4.1.11606.10.101.10.1.1.40	TruthValue	read-write	ONU sending FEC status.
T/F onuIfProtectedStatus	1.3.6.1.4.1.11606.10.101.10.1.1.41	TruthValue	read-write	ONU port protected status.
INT onuSehedulePolicy	1.3.6.1.4.1.11606.10.101.10.1.1.42	INTEGER	read-write	ONU schedule policy.1=sp(1), 2=wrr(2).
INT onuDynamicMacLearningStatus	1.3.6.1.4.1.11606.10.101.10.1.1.43	INTEGER	read-write	ONU dynamic MAC address learning status. 1=off, 2=on.
INT onuDynamicMacAgingTime	1.3.6.1.4.1.11606.10.101.10.1.1.44	INTEGER	read-write	ONU dynamic MAC address aging time. Range is 0 or 15-3825
MAC onuStaticMacAddress	1.3.6.1.4.1.11606.10.101.10.1.1.45	MacAddress	read-write	ONU static MAC address. Need to configure with corresponding MAC addresss port together.
OCT onuStaticMacAddressPortBitmap	1.3.6.1.4.1.11606.10.101.10.1.1.46	OCTET STRING	read-write	ONU static MAC address port bitmap value. Each bit manifests an ONU port static MAC address status. 0= no,1=yes.
ROW onuStaticMacAddressConfigRowStatus	1.3.6.1.4.1.11606.10.101.10.1.1.47	RowStatus	read-create	ONU static MAC address configuration row status.
MAC onuClearDynamicMacAddressByMac	1.3.6.1.4.1.11606.10.101.10.1.1.48	MacAddress	write-only	Clear dynamic MAC address according to MAC.
INT onuClearDynamicMacAddressByPort	1.3.6.1.4.1.11606.10.101.10.1.1.49	INTEGER	write-only	Clear dynamic MAC address according to port number.
OCT onuPriorityQueueMapping	1.3.6.1.4.1.11606.10.101.10.1.1.50	OCTET STRING	read-write	ONU priority queue mapping.Totally 8 bytes,each byte manifests priority of corresponding queue number sorted by byte count.
INT onuVlanMode	1.3.6.1.4.1.11606.10.101.10.1.1.51	INTEGER	read-write	ONU VLAN mode.(0 - transparent mode, 1 - tag mode, 2 - translation mode, 3 - stacking mode, 254 - none). Only UNI set is supported.
INT onuIpAddressMode	1.3.6.1.4.1.11606.10.101.10.1.1.52	INTEGER	read-write	ONU IP address work mode. 0-default mode, dhcp, 1-static IP address mode.
IP onuStaticIpAddress	1.3.6.1.4.1.11606.10.101.10.1.1.53	IpAddress	read-write	ONU static ip address.
IP onuStaticIpMask	1.3.6.1.4.1.11606.10.101.10.1.1.54	IpAddress	read-write	ONU static ip mask.
IP onuStaticIpGateway	1.3.6.1.4.1.11606.10.101.10.1.1.55	IpAddress	read-write	ONU static ip gateway address.
INT onuMgmtVlan	1.3.6.1.4.1.11606.10.101.10.1.1.56	INTEGER	read-write	ONU management VLAN.
ROW onuStaticIpAddressRowStatus	1.3.6.1.4.1.11606.10.101.10.1.1.57	RowStatus	read-create	ONU static ip address configuration row status. These four items: onuIpAddressMode, onuStaticIpAddress, onuStaticIpMask, onuStaticIpGateway, onuMgmtVlan, are added together.
INT onuCIR	1.3.6.1.4.1.11606.10.101.10.1.1.58	INTEGER	read-write	onu CIR.
INT onuCBS	1.3.6.1.4.1.11606.10.101.10.1.1.59	INTEGER	read-write	onu CBS.
INT onuEBS	1.3.6.1.4.1.11606.10.101.10.1.1.60	INTEGER	read-write	onu EBS.
STR onuIfMacACL	1.3.6.1.4.1.11606.10.101.10.1.1.61	DisplayString	read-write	ONU MAC address ACL.
STR onuIfIpACL	1.3.6.1.4.1.11606.10.101.10.1.1.62	DisplayString	read-write	ONU address ACL.
OCT onuVlans	1.3.6.1.4.1.11606.10.101.10.1.1.63	OCTET STRING	read-write	ONU VLAN set value. Each bit manifests a VLAN status. 0= no,1=yes.
INT onuActivePonDiid	1.3.6.1.4.1.11606.10.101.10.1.1.64	INTEGER	read-only	ONU active pon port VS OLT PON diID.
INT onuPonPortCount	1.3.6.1.4.1.11606.10.101.10.1.1.65	INTEGER	read-only	ONU pon port count. Max is 2, and min is 1.
INT onuActivePonPortIndex	1.3.6.1.4.1.11606.10.101.10.1.1.66	INTEGER	read-only	ONU active pon port VS OLT pon port index.
INT onuSerialPortWorkMode	1.3.6.1.4.1.11606.10.101.10.1.1.67	INTEGER	read-write	ONU active pon port work mode. Default value is 0-none.
INT onuSerialPortWorkPort	1.3.6.1.4.1.11606.10.101.10.1.1.68	INTEGER	read-write	ONU serial port work port.
ROW onuSerialWorkModeRowStatus	1.3.6.1.4.1.11606.10.101.10.1.1.69	RowStatus	read-create	ONU serial port setting row status. These two items: onuSerialPortWorkMode and onuSerialPortWorkPort, are added together.
INT onuRemoteServerIpAddrIndex	1.3.6.1.4.1.11606.10.101.10.1.1.70	INTEGER	read-write	ONU remote server IP address index. This value is index of NMS-EPON-ONU-REMOTE-SERVER-INFO. 0-this value is deleted. Default value is none.
IP onuPeerOLTIpAddr	1.3.6.1.4.1.11606.10.101.10.1.1.71	IpAddress	read-only	ONU peer OLT IP address.
INT onuPeerPONIndex	1.3.6.1.4.1.11606.10.101.10.1.1.72	INTEGER	read-only	ONU peer PON port index.
INT onuSerialPortCount	1.3.6.1.4.1.11606.10.101.10.1.1.73	INTEGER	read-only	ONU serial port count. If no serial port, value set to 0.
INT onuBakupPonStatus	1.3.6.1.4.1.11606.10.101.10.1.1.74	INTEGER	read-only	ONU bakup PON port status. passive(0), active(1)
INT onuCurrentPONInUse	1.3.6.1.4.1.11606.10.101.10.1.1.75	INTEGER	read-only	ONU current PON port using status. in-use(1), not-in-use(2). This node is noly use for D-PSG.
PHY onuCurrentPONMAC	1.3.6.1.4.1.11606.10.101.10.1.1.76	PhysAddress	read-only	ONU current PON MAC address. This node is noly use for D-PSG.
INT onuPeerPONDiid	1.3.6.1.4.1.11606.10.101.10.1.1.77	INTEGER	read-only	ONU peer PON DIid value. This node is noly use for D-PSG.
PHY onuPeerPONMAC	1.3.6.1.4.1.11606.10.101.10.1.1.78	PhysAddress	read-only	ONU peer PON MAC address. This node is noly use for D-PSG.
INT onuConfigurablePortDiid	1.3.6.1.4.1.11606.10.101.10.1.1.79	INTEGER	read-only	ONU configurabale PON DIid value. This node is noly use for D-PSG.
nmsepononuPonSwitchTable	1.3.6.1.4.1.11606.10.101.10.2		not-accessible	A list of epon ONU Pon Port Switch table entries. That table only uses for double PON port ONU device.
nmsEponOnuPonSwitchEntry	1.3.6.1.4.1.11606.10.101.10.2.1		not-accessible	A collection of additional objects in switch of epon ONU PON port.
INT ifIndex	1.3.6.1.4.1.11606.10.101.10.2.1.1	INTEGER	read-only	EPON port diID or ONU llid.
INT operType	1.3.6.1.4.1.11606.10.101.10.2.1.2	INTEGER	read-write	ONU PON port switch operation type. 0-switch to another PON port and never switch back, 1-switch to another PON port and switch back.
nmsepononucap2Table	1.3.6.1.4.1.11606.10.101.10.3		not-accessible	A list of epon ONU capability-2 table entries.
nmsEponOnuCap2Entry	1.3.6.1.4.1.11606.10.101.10.3.1		not-accessible	A collection of additional objects in the epon ONU capability-2 table.
INT cap2OnuType	1.3.6.1.4.1.11606.10.101.10.3.1.1	INTEGER	read-only	ONU type.
INT cap2Multillid	1.3.6.1.4.1.11606.10.101.10.3.1.2	INTEGER	read-only	If ONU support multillid or not.
INT cap2ProtectionType	1.3.6.1.4.1.11606.10.101.10.3.1.3	INTEGER	read-only	ONU protection type: not supported is 0, support c-psg is 1, support d-psg is 2.
INT cap2NumPONIf	1.3.6.1.4.1.11606.10.101.10.3.1.4	INTEGER	read-only	Number of pon ports.
INT cap2NumSlot	1.3.6.1.4.1.11606.10.101.10.3.1.5	INTEGER	read-only	Number of slots.
INT cap2NumIfType	1.3.6.1.4.1.11606.10.101.10.3.1.6	INTEGER	read-only	Number of interface types.
INT cap2NumGEPorts	1.3.6.1.4.1.11606.10.101.10.3.1.7	INTEGER	read-only	Number of GE ports.
INT cap2NumFEPorts	1.3.6.1.4.1.11606.10.101.10.3.1.8	INTEGER	read-only	Number of FE ports.
INT cap2NumVoIPPorts	1.3.6.1.4.1.11606.10.101.10.3.1.9	INTEGER	read-only	Number of VoIP ports.
INT cap2NumTDMPorts	1.3.6.1.4.1.11606.10.101.10.3.1.10	INTEGER	read-only	Number of TDM ports.
INT cap2NumADSL2Ports	1.3.6.1.4.1.11606.10.101.10.3.1.11	INTEGER	read-only	Number of ADSL2 ports.
INT cap2NumVDSL2Ports	1.3.6.1.4.1.11606.10.101.10.3.1.12	INTEGER	read-only	Number of VDSL2 ports.
INT cap2NumWLANPorts	1.3.6.1.4.1.11606.10.101.10.3.1.13	INTEGER	read-only	Number of WLAN ports.
INT cap2NumUSBPorts	1.3.6.1.4.1.11606.10.101.10.3.1.14	INTEGER	read-only	Number of USB ports.
INT cap2NumCATVRFPorts	1.3.6.1.4.1.11606.10.101.10.3.1.15	INTEGER	read-only	Number of CATV RF ports.
INT cap2NumSerialPorts	1.3.6.1.4.1.11606.10.101.10.3.1.16	INTEGER	read-only	Number of serial ports.
INT cap2BatteryBackup	1.3.6.1.4.1.11606.10.101.10.3.1.17	INTEGER	read-only	If ONU have bakup battery or not.
nmsepononusnmpTable	1.3.6.1.4.1.11606.10.101.10.4		not-accessible	A list of epon ONU capability-2 table entries.
nmsEponOnuSnmpEntry	1.3.6.1.4.1.11606.10.101.10.4.1		not-accessible	A collection of additional objects in the epon ONU capability-2 table.
PHY onuMacAddr	1.3.6.1.4.1.11606.10.101.10.4.1.1	PhysAddress	read-only	ONU MAC address .
IP onuIpAddr	1.3.6.1.4.1.11606.10.101.10.4.1.2	IpAddress	read-write	ONU IP address .
STR onuCommRo	1.3.6.1.4.1.11606.10.101.10.4.1.3	DisplayString	read-write	ONU SNMP read community .
STR onuCommRw	1.3.6.1.4.1.11606.10.101.10.4.1.4	DisplayString	read-write	ONU SNMP read & write community .
INT onuSnmpPort	1.3.6.1.4.1.11606.10.101.10.4.1.5	INTEGER	read-write	ONU SNMP get/set port number .
INT onuSnmpTrapPort	1.3.6.1.4.1.11606.10.101.10.4.1.6	INTEGER	read-write	ONU SNMP trap port number .
INT onuSnmpVersion	1.3.6.1.4.1.11606.10.101.10.4.1.7	INTEGER	read-write	ONU SNMP get/set operation package version .
INT onuSnmpTrapVersion	1.3.6.1.4.1.11606.10.101.10.4.1.8	INTEGER	read-write	ONU SNMP trap package version .
IP onuSnmpTrapHost	1.3.6.1.4.1.11606.10.101.10.4.1.9	IpAddress	read-write	ONU SNMP trap host name.
nmsepononuopticalportTable	1.3.6.1.4.1.11606.10.101.10.5		not-accessible	A list of epon ONU Optical Port table entries.
nmsEponOnuOpticalPortEntry	1.3.6.1.4.1.11606.10.101.10.5.1		not-accessible	A collection of additional objects in the epon ONU Optical Port table.
INT opIfIndex	1.3.6.1.4.1.11606.10.101.10.5.1.1	INTEGER	read-only	ONU PON port ifIndex. The same value as ifIndex in ifTable.
INT opModuleTemp	1.3.6.1.4.1.11606.10.101.10.5.1.2	INTEGER	read-only	ONU PON port optical module temperature. Unit is 1/256 Celsuis.
INT opModuleVolt	1.3.6.1.4.1.11606.10.101.10.5.1.3	INTEGER	read-only	ONU PON port optical module volt. Unit is 100uV.
INT opModuleCurrent	1.3.6.1.4.1.11606.10.101.10.5.1.4	INTEGER	read-only	ONU PON port optical module volt. Unit is 2uA.
INT opModuleRxPower	1.3.6.1.4.1.11606.10.101.10.5.1.5	INTEGER	read-only	ONU PON port optical receive power. Unit is 0.1dB.
INT opModuleTxPower	1.3.6.1.4.1.11606.10.101.10.5.1.6	INTEGER	read-only	ONU PON port optical send power. Unit is 0.1dB.
onuIPParamGetTable	1.3.6.1.4.1.11606.10.101.10.7		not-accessible	A list of epon ONU IP Parameter getting table entries.
onuIPParamGetEntry	1.3.6.1.4.1.11606.10.101.10.7.1		not-accessible	A collection of additional objects in the epon ONU IP Param getting table.
INT onuIfIndex	1.3.6.1.4.1.11606.10.101.10.7.1.1	INTEGER	read-only	Index of LLID interface.
INT ipVersion	1.3.6.1.4.1.11606.10.101.10.7.1.2	INTEGER	read-only	Onu management ip version. 1 means ipv4, 2 means ipv6.
IP ipv4Address	1.3.6.1.4.1.11606.10.101.10.7.1.3	IpAddress	read-only	Onu management ipv4 address. Valid only ipVersion is 1(ipv4).
IP ipv4Mask	1.3.6.1.4.1.11606.10.101.10.7.1.4	IpAddress	read-only	Onu management ipv4 mask. Valid only ipVersion is 1(ipv4).
IP ipv4GateWay	1.3.6.1.4.1.11606.10.101.10.7.1.5	IpAddress	read-only	Onu management ipv4 gateway. Valid only ipVersion is 1(ipv4).
ADR ipv6Address	1.3.6.1.4.1.11606.10.101.10.7.1.6	InetAddressIPv6	read-only	Onu management ipv6 address. Valid only ipVersion is 2(ipv6).
INT ipv6Prefix	1.3.6.1.4.1.11606.10.101.10.7.1.7	INTEGER	read-only	Onu management ipv6 prefix. Valid only ipVersion is 2(ipv6).
ADR ipv6GateWay	1.3.6.1.4.1.11606.10.101.10.7.1.8	InetAddressIPv6	read-only	Onu management ipv6 gateway. Valid only ipVersion is 2(ipv6).
INT cVLAN	1.3.6.1.4.1.11606.10.101.10.7.1.9	INTEGER	read-only	Onu management cvlan. If Packet has two tags, This is inner tag. The range is 1-4094.
INT sVLAN	1.3.6.1.4.1.11606.10.101.10.7.1.10	INTEGER	read-only	Onu management svlan. The range is 0-4094. 0 means packet has only one tag, vlanid is cvlan. Nonzero means packet has two tags, and vlanid of ounter tag is svlan.
INT priority	1.3.6.1.4.1.11606.10.101.10.7.1.11	INTEGER	read-only	Onu management vlan priority. The range is 0-7.
onuCTCIPParamConfigTable	1.3.6.1.4.1.11606.10.101.10.29		not-accessible	onuCTCIPParamConfigTable.
onuCTCIPParamConfigEntry	1.3.6.1.4.1.11606.10.101.10.29.1		not-accessible	Table of onuCTCIPParamConfig.
INT ctcIfIndex	1.3.6.1.4.1.11606.10.101.10.29.1.1	INTEGER	read-only	Index of LLID interface.
INT ctcIpVersion	1.3.6.1.4.1.11606.10.101.10.29.1.2	INTEGER	read-write	Onu management ip version. 1 means ipv4, 2 means ipv6.
IP ctcIpv4Address	1.3.6.1.4.1.11606.10.101.10.29.1.3	IpAddress	read-write	Onu management ipv4 address. Valid only ipVersion is 1(ipv4).
IP ctcIpv4Mask	1.3.6.1.4.1.11606.10.101.10.29.1.4	IpAddress	read-write	Onu management ipv4 mask. Valid only ipVersion is 1(ipv4).
IP ctcIpv4GateWay	1.3.6.1.4.1.11606.10.101.10.29.1.5	IpAddress	read-write	Onu management ipv4 gateway. Valid only ipVersion is 1(ipv4).
ADR ctcIpv6Address	1.3.6.1.4.1.11606.10.101.10.29.1.6	InetAddressIPv6	read-write	Onu management ipv6 address. Valid only ipVersion is 2(ipv6).
INT ctcIpv6Prefix	1.3.6.1.4.1.11606.10.101.10.29.1.7	INTEGER	read-write	Onu management ipv6 prefix. Valid only ipVersion is 2(ipv6).
ADR ctcIpv6GateWay	1.3.6.1.4.1.11606.10.101.10.29.1.8	InetAddressIPv6	read-write	Onu management ipv6 gateway. Valid only ipVersion is 2(ipv6).
INT ctcPriority	1.3.6.1.4.1.11606.10.101.10.29.1.11	INTEGER	read-write	Onu management vlan priority. The range is 0-7.
ROW onuIPConfigRowStatus	1.3.6.1.4.1.11606.10.101.10.29.1.12	RowStatus	read-write	CTC ONU ip address configuration row status. These ten items: ipVersion,ipv4Address, ipv4Mask,ipv4GateWay, ipv6Address, ipv6Prefix, ipv6GateWay, CVLAN, SVLAN, Priority, are added together.
onuCATVConfigTable	1.3.6.1.4.1.11606.10.101.10.30		not-accessible	onuCATVConfigTable.
onuCATVConfigEntry	1.3.6.1.4.1.11606.10.101.10.30.1		not-accessible	Table of onuCATVConfig.
INT ifCATVIndex	1.3.6.1.4.1.11606.10.101.10.30.1.1	INTEGER	read-only	Index of LLID interface.
INT ifCATVAdminStatus	1.3.6.1.4.1.11606.10.101.10.30.1.2	INTEGER	read-write	Onu CATV module admin status. 1 means admin up, 2 means admin down. Default is 1(admin up).
onuCATVRxPowerTable	1.3.6.1.4.1.11606.10.101.10.31		not-accessible	onuCATVRxPowerTable.
onuCATVRxPowerEntry	1.3.6.1.4.1.11606.10.101.10.31.1		not-accessible	Table of onuCATVRxPower.
INT ifCATVRxIndex	1.3.6.1.4.1.11606.10.101.10.31.1.1	INTEGER	read-only	Index of LLID interface.
INT rxPowerEx	1.3.6.1.4.1.11606.10.101.10.31.1.2	INTEGER	read-only	Onu CATV module rx power. Unit is 0.1 DBm.

RFC description

NMS EPON ONU trap MIB providing status, alarm, and module monitoring for Ethernet PON optical network units.

Start monitoring NMS Communications EPON ONU/OLT access equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-EPON-ONU