TIMETRA-SDP-MIB :: sdpBindOperBandwidth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-SDP-MIBsdpBindOperBandwidth

sdpBindOperBandwidth

Module: TIMETRA-SDP-MIB

OID (symbolic): TIMETRA-SDP-MIB::sdpBindOperBandwidth

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.4.4.1.41

Node type: OBJECT-TYPE

Type: SdpBindBandwidth

Access: read-only

Description: The value of the object sdpBindOperBandwidth indicates the bandwidth that has been reserved for this SDP binding in kilo-bits per second. The value 0 indicates that SDP doesn't have bandwidth to satisfy the bandwidth requirement of this SDP binding. The sdpBindOperBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services.

What is sdpBindOperBandwidth?

This object reports the actual bandwidth in kilobits per second that has been successfully reserved for an SDP (Service Distribution Path) binding, applicable to pipe services like epipe and apipe. A value of zero indicates insufficient bandwidth available to meet the binding's requirements. Operators use this to verify that required bandwidth guarantees have been allocated and to identify congestion bottlenecks in the network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.4.1.41
snmpwalk -v2c -c public <target> TIMETRA-SDP-MIB::sdpBindOperBandwidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.4.1.41.1
snmpget -v2c -c public <target> TIMETRA-SDP-MIB::sdpBindOperBandwidth.1

Start monitoring Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-SDP-MIB::sdpBindOperBandwidth OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.4tmnxSdpObjsALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.4sdpBindTableALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.4.1sdpBindEntryALCATEL-IND1-TIMETRA-SDP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.4.4.1.41sdpBindOperBandwidthTIMETRA-SDP-MIB