TIMETRA-SDP-MIB :: sdpBindOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-SDP-MIBsdpBindOperStatus

sdpBindOperStatus

Module: TIMETRA-SDP-MIB

OID (symbolic): TIMETRA-SDP-MIB::sdpBindOperStatus

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.4.4.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The value of sdpBindOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational.

'noEgressLabel' The ingress label is available but the egress one is missing.

'noIngressLabel' The egress label is available but the ingress one is not.

'noLabels' Both the ingress and the egress labels are missing.

'down' The binding is administratively down.

'svcMtuMismatch' Both labels are available, but a service MTU mismatch was detected between the local and the far-end devices.

'sdpPathMtuTooSmall' The operating path MTU of the corresponding SDP is smaller than the service MTU.

'sdpNotReady' The SDP's signaling session is down.

'sdpDown' The SDP is not operationally up.

'sapDown' The SAP associated with the service is down.

What is sdpBindOperStatus?

This OID indicates the current operational status of an SDP (Service Delivery Point) binding—whether the connection is up, down, or in a transitional state. It reflects real-time health of a service tunnel in the carrier network. An operator would monitor this to know when service-delivery tunnels fail and need to be restored or re-routed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.4.1.8
snmpwalk -v2c -c public <target> TIMETRA-SDP-MIB::sdpBindOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.4.1.8.1
snmpget -v2c -c public <target> TIMETRA-SDP-MIB::sdpBindOperStatus.1

Start monitoring Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-SDP-MIB::sdpBindOperStatus OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7x50 Service Router platforms, entire product line (Service Distribution Point admin/oper status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.4tmnxSdpObjsALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.4sdpBindTableALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.4.1sdpBindEntryALCATEL-IND1-TIMETRA-SDP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.4.4.1.8sdpBindOperStatusTIMETRA-SDP-MIB