All MIBs › PORT-MIB
Organization: Coriolis Networks
Last Updated: 2000-07-27
Category: Optical Networking
Description: Manages Coriolis Networks optical port configuration, laser state, wavelength assignment, and optical power level monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is PORT-MIB?
PORT-MIB is a vendor-specific enterprise MIB from Coriolis Networks, an optical networking equipment vendor, covering the line cards installed in Coriolis chassis-based optical switching/transport boxes. Per its short description it exposes per-port optical configuration and status such as laser state, wavelength assignment, and optical power level. This makes it a hardware-health monitoring MIB in the classic sense: laser on/off state and optical power readings are the primary indicators used to catch a degrading transceiver or fiber path before a link actually fails. No object list was available in this batch to confirm dependencies, but MIBs of this kind typically layer port/card indexing on top of ENTITY-MIB for physical inventory. It is typically deployed in metro or DWDM optical transport networks where an NMS polls per-port optical parameters for proactive fault detection, typically after an operator obtains the PORT-MIB download from Coriolis Networks to load into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Coriolis Networks optical switch/chassis line cards
Monitoring Examples
No sample_objects were provided for this MIB in the data given, so a concrete table/object-level monitoring scenario cannot be honestly constructed here; based on the short description, an admin would typically poll per-port laser state and optical power level objects to catch a failing laser or degrading fiber path before the link drops, but the exact table/object names are not available in this batch.
What Can Be Monitored
- laser on/off state
- wavelength assignment
- optical power level
- port/card operational status
This MIB depends on
Related MIBs
Imported Objects
From CARD-MIB
| slotNo | OBJECT-TYPE |
From CORIOLIS-MIB
| coriolisMibs | OBJECT-IDENTITY |
| port | OBJECT-IDENTITY |
From EtherLike-MIB
| dot3StatsDuplexStatus | OBJECT-TYPE |
From IF-MIB
| InterfaceIndex | |
| ifAdminStatus | OBJECT-TYPE |
| ifOperStatus | OBJECT-TYPE |
| ifSpeed | OBJECT-TYPE |
From MAU-MIB
| ifMauAutoNegConfig | OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| TruthValue |
From SONET-MIB
| sonetLineCurrentStatus | OBJECT-TYPE |
| sonetPathCurrentStatus | OBJECT-TYPE |
| sonetSectionCurrentStatus | OBJECT-TYPE |
| sonetVTCurrentStatus | OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF portPhyStatusChange | 1.3.6.1.4.1.5812.0.0 | Change in the operational status of a port, 1 means the port came up, 2 means it went down | ||
| NTF portAdminStatusChange | 1.3.6.1.4.1.5812.0.1 | Change in the admin status of a port, 1 means the port came up, 2 means it went down | ||
| NTF portSpeedStatusTrap | 1.3.6.1.4.1.5812.0.20 | Change in speed of an interface e.g. 10 or 100 for a Fast Ethernet port | ||
| NTF etherPortDuplexStatusTrap | 1.3.6.1.4.1.5812.0.21 | Change in the duplex status of an ethernet port , 2 means half-duplex, 3 means full duplex | ||
| NTF etherPortAutonegStatusTrap | 1.3.6.1.4.1.5812.0.22 | Change in status of the autoneg process, 3 means it has completed | ||
| NTF sonetSectionLOSChange | 1.3.6.1.4.1.5812.0.27 | Change in the SONET LOS status. | ||
| NTF sonetSectionLOFChange | 1.3.6.1.4.1.5812.0.28 | Change in the SONET LOF status. | ||
| NTF sonetLineAISChange | 1.3.6.1.4.1.5812.0.29 | Change in the SONET Line AIS status. | ||
| NTF sonetLineRDIChange | 1.3.6.1.4.1.5812.0.30 | Change in the SONET Line RDI status. | ||
| NTF sonetPathLOPChange | 1.3.6.1.4.1.5812.0.31 | Change in the SONET Path LOP status. | ||
| NTF sonetPathAISChange | 1.3.6.1.4.1.5812.0.32 | Change in the SONET Path AIS status. | ||
| NTF sonetPathRDIChange | 1.3.6.1.4.1.5812.0.33 | Change in the SONET Path RDI status. | ||
| NTF sonetPathUNEQPChange | 1.3.6.1.4.1.5812.0.34 | Indicates whether the SONET path is equipped or not. | ||
| NTF sonetPathPSLMChange | 1.3.6.1.4.1.5812.0.35 | Indicates if there is any mismatch in the SONET signal label. | ||
| NTF sonetVTLOPChange | 1.3.6.1.4.1.5812.0.36 | Change in the SONET VT LOP status. | ||
| NTF sonetVTAISChange | 1.3.6.1.4.1.5812.0.37 | Change in the SONET VT AIS status. | ||
| NTF sonetVTRDIChange | 1.3.6.1.4.1.5812.0.38 | Change in the SONET VT RDI status. | ||
| NTF sonetVTRFIChange | 1.3.6.1.4.1.5812.0.39 | Change in the SONET VT RFI status. | ||
| NTF sonetVTUNEQPChange | 1.3.6.1.4.1.5812.0.40 | Indicates whether the SONET VT is equipped or not. | ||
| NTF sonetVTPSLMChange | 1.3.6.1.4.1.5812.0.41 | Indicates if there is any mismatch in the SONET signal label. | ||
| NTF ringPortK1K2Change | 1.3.6.1.4.1.5812.0.47 | Indicates the change in status indicated by K1,K2 bytes | ||
| NTF ringPortAISChange | 1.3.6.1.4.1.5812.0.48 | A signal indicating a change of status indicated by the AIS bytes | ||
| NTF ringPortPHYChange | 1.3.6.1.4.1.5812.0.49 | A trap indicating the change in phy status of ring port | ||
| NTF sonetPortTCAlarm | 1.3.6.1.4.1.5812.0.50 | A SONET alarm threshold has been crossed. | ||
| NTF dsxAlarm | 1.3.6.1.4.1.5812.0.55 | The status of a DSx line has changed. | ||
| portMIB | 1.3.6.1.4.1.5812.3.1 | The MIB module for cards in coriolis boxes | ||
| portTable | 1.3.6.1.4.1.5812.3.2 | not-accessible | The port table. This contains the portNo variable, which is used as an index into specific port tables | |
| portEntry | 1.3.6.1.4.1.5812.3.2.1 | not-accessible | Entry containing the portNo variable | |
| INT portNo | 1.3.6.1.4.1.5812.3.2.1.1 | INTEGER | not-accessible | The purpose of this variable is to be used as index into tables |
| NUM mib2IfIndex | 1.3.6.1.4.1.5812.3.2.1.2 | InterfaceIndex | read-only | This variable serves to identify the slot and port number. |
| etherPortTable | 1.3.6.1.4.1.5812.3.3 | not-accessible | The ethernet port table. This table contains information about the ethernet ports in this device. | |
| etherPortEntry | 1.3.6.1.4.1.5812.3.3.1 | not-accessible | Entry containing information about ethernet ports | |
| INT etherPortSpeedCfg | 1.3.6.1.4.1.5812.3.3.1.1 | INTEGER | read-write | The desired port speed if Autonegotiation is disabled. Management control of the port speed can also be accomplished through the MAU MIB via ifMauDefaultType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to configure the duplex mode of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy. |
| INT etherPortSpeedStatus | 1.3.6.1.4.1.5812.3.3.1.2 | INTEGER | read-write | The speed of the port. If autoneg is enabled, this is determined by the results of the autoneg process. If autoneg is disabled, this is the same as IfAdminSpeed. |
| INT etherPortDuplexCfg | 1.3.6.1.4.1.5812.3.3.1.3 | INTEGER | read-write | The desired duplex mode of operation of the MAC entity if Autonegotiation is disabled. Management control of the duplex mode can also be accomplished through the MAU MIB via ifMauDefaultType.Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to configure the duplex mode of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy. |
| INT etherPortLoopback | 1.3.6.1.4.1.5812.3.3.1.4 | INTEGER | read-write | Enables/disables loopback mode. |
| INT etherPortPhyReset | 1.3.6.1.4.1.5812.3.3.1.5 | INTEGER | read-write | Ethernet port phy reset |
| CTR etherPortStatsTxPkts64Octets | 1.3.6.1.4.1.5812.3.3.1.6 | Counter | read-only | Total 64 byte packets transmitted on ethernet port. |
| CTR etherPortStatsTxPkts65to127Octets | 1.3.6.1.4.1.5812.3.3.1.7 | Counter | read-only | The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| CTR etherPortStatsTxPkts128to255Octets | 1.3.6.1.4.1.5812.3.3.1.8 | Counter | read-only | The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| CTR etherPortStatsTxPkts256to511Octets | 1.3.6.1.4.1.5812.3.3.1.9 | Counter | read-only | The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| CTR etherPortStatsTxPkts512to1023Octets | 1.3.6.1.4.1.5812.3.3.1.10 | Counter | read-only | The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| CTR etherPortStatsTxPkts1024to1518Octets | 1.3.6.1.4.1.5812.3.3.1.11 | Counter | read-only | The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| CTR etherPortStatsTxPkts1519to1530Octets | 1.3.6.1.4.1.5812.3.3.1.12 | Counter | read-only | The total number of packets (including bad packets) transmitted that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets). |
| CTR etherPortStatsTxFCSErrors | 1.3.6.1.4.1.5812.3.3.1.13 | Counter | read-only | Total packets transmitted on ethernet port with FCS errors (if MAC generates the FCS, this can never be incremented). |
| CTR etherPortStatsTxOversize | 1.3.6.1.4.1.5812.3.3.1.14 | Counter | read-only | Number of frames transmitted greater than 1518 bytes. |
| CTR etherPortStatsTxUndersize | 1.3.6.1.4.1.5812.3.3.1.15 | Counter | read-only | Number of packets less than 64 bytes transmitted. |
| CTR etherPortStatsTxControlFrames | 1.3.6.1.4.1.5812.3.3.1.16 | Counter | read-only | Number of control frames transmitted. |
| CTR etherPortStatsTxBadFifoUnderrun | 1.3.6.1.4.1.5812.3.3.1.17 | Counter | read-only | Number of bad frames (due to Transmit FIFO underrun) transmitted. |
| CTR etherPortStatsTxBadFifoOverrun | 1.3.6.1.4.1.5812.3.3.1.18 | Counter | read-only | Number of bad frames (due to Transmit FIFO overrun) transmitted. |
| CTR etherPortStatsTxDropFifoOverrun | 1.3.6.1.4.1.5812.3.3.1.19 | Counter | read-only | Number of frames dropped due to Transmit FIFO underrun. |
| CTR etherPortStatsTxBadParityError | 1.3.6.1.4.1.5812.3.3.1.20 | Counter | read-only | Number of bad frames (due to parity error) transmitted. |
| CTR etherPortStatsTxDropParityError | 1.3.6.1.4.1.5812.3.3.1.21 | Counter | read-only | Number of bad frames (due to parity error) dropped. |
| CTR etherPortStatsTxBadSequenceError | 1.3.6.1.4.1.5812.3.3.1.22 | Counter | read-only | Number of bad frames (due to frame Sequence Error) transmitted. |
| CTR etherPortStatsTxDropSequenceError | 1.3.6.1.4.1.5812.3.3.1.23 | Counter | read-only | Number of bad frames (due to frame Sequence Error) dropped. |
| CTR etherPortStatsTxBadJamError | 1.3.6.1.4.1.5812.3.3.1.24 | Counter | read-only | Number of bad frames (due to Jam Bit Error) transmitted. |
| CTR etherPortStatsTxDropJamError | 1.3.6.1.4.1.5812.3.3.1.25 | Counter | read-only | Number of bad frames (due to Jam Bit Error) dropped. |
| INT etherPortSpeedTrapEnable | 1.3.6.1.4.1.5812.3.3.1.26 | INTEGER | read-write | Indicates whether portSpeedTrap traps should be generated for this interface. |
| INT etherPortDuplexTrapEnable | 1.3.6.1.4.1.5812.3.3.1.27 | INTEGER | read-write | Ethernet port duplex trap enable |
| INT etherPortAutonegTrapEnable | 1.3.6.1.4.1.5812.3.3.1.28 | INTEGER | read-write | Indicates whether autoNegCompleteTrap traps should be generated for this interface. |
| INT etherPortRowStatus | 1.3.6.1.4.1.5812.3.3.1.29 | INTEGER | read-write | This variable is used to create or delete instances of ethernet ports This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port |
| INT etherPortAutonegAdvSpeed | 1.3.6.1.4.1.5812.3.3.1.30 | INTEGER | read-write | This specifies what speed capability is advertised for autonegotiation. If 100 MBPS is set, then 10 MBPS is also advertised.This does not apply to Gig Ethernet Phys, since they do not autonegotiate speed or duplex. |
| INT etherPortAutonegAdvDuplex | 1.3.6.1.4.1.5812.3.3.1.31 | INTEGER | read-write | This specifies what duplex capability is advertised for autonegotiation. If Full Duplex is set, then Half Duplex is also adveetised.This does not apply to Gig Ethernet Phys, since they do not autonegotiate speed or duplex. |
| INT etherPortPauseStateReceived | 1.3.6.1.4.1.5812.3.3.1.32 | INTEGER | read-only | The PAUSE mode received from the remote device, as read from the Auto Negotiation Partner Ability GMII Register of the PHY.If autoNegotiation is not enabled and completed, then this is set to undefined. This is used to determine the dot3PauseOperMode for the interface. |
| INT etherPortVlanMode | 1.3.6.1.4.1.5812.3.3.1.33 | INTEGER | read-write | Specifies the VLAN mode for the port |
| INT etherPortDefaultVlanId | 1.3.6.1.4.1.5812.3.3.1.34 | INTEGER | read-write | Specifies what the default Vlan Id is for the port. This is used on ingress only if vlanMode is Enabled and a frame is received either untagged or tagged with a VID not known to the port. |
| CTR etherPortRxOverrun | 1.3.6.1.4.1.5812.3.3.1.35 | Counter | read-only | The total number of packets dropped by the GMAC due to the occurence of a receive overrun (gig only- supported by GMAC-D2 and later) |
| CTR etherPortRxSyncErrors | 1.3.6.1.4.1.5812.3.3.1.36 | Counter | read-only | The total number of packets dropped due to loss of sync during packet reception. (GIG only- supported by GMAC-D2 and later) |
| CTR etherPortRxDelSeqErrors | 1.3.6.1.4.1.5812.3.3.1.37 | Counter | read-only | The total number of packets dropped due to delimiter sequence errors as detected by the GMAC during packet reception. (GIG only- supported by GMAC-D2 and later) |
| CTR etherPortRxFifoOverrunErrors | 1.3.6.1.4.1.5812.3.3.1.38 | Counter | read-only | The total number of packets dropped by the GMAC due to the occurence of a receive FIFO overrun (gig only- supported by GMAC-D2 and later) |
| CTR etherPortRxControlFrames | 1.3.6.1.4.1.5812.3.3.1.39 | Counter | read-only | Number of control frames received by this port |
| CTR etherPortRxThreshOvrszFrames | 1.3.6.1.4.1.5812.3.3.1.40 | Counter | read-only | The total number of threshold oversized frames received by the GMAC (gig only - supported by GMAC-D2 and later) |
| CTR etherPortStatsRxPkts1519to1530Octets | 1.3.6.1.4.1.5812.3.3.1.41 | Counter | read-only | The total number of packets (including bad packets) received that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets). |
| tdmIoDS1PortTable | 1.3.6.1.4.1.5812.3.4 | not-accessible | The DS1 TDM IO Port Table | |
| tdmIoDS1PortEntry | 1.3.6.1.4.1.5812.3.4.1 | not-accessible | Entry containing information about TDM IO DS1 ports | |
| INT tdmIoDS1PortType | 1.3.6.1.4.1.5812.3.4.1.1 | INTEGER | read-write | The type of TDM IO DS1 port |
| INT tdmIoDS1PortTiming | 1.3.6.1.4.1.5812.3.4.1.2 | INTEGER | read-write | Clock source for the DS1 port 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock. |
| INT tdmIoDS1PortBuildOut | 1.3.6.1.4.1.5812.3.4.1.5 | INTEGER | read-write | Line Build Out for Signal Strength. For short haul, a distance (in feet) is chosen. For long haul, an attenuation strength is chosen in Decibels. |
| INT tdmIoDS1PortFraming | 1.3.6.1.4.1.5812.3.4.1.6 | INTEGER | read-only | Framing type implemented for this interface. |
| INT tdmIoDS1PortCoding | 1.3.6.1.4.1.5812.3.4.1.7 | INTEGER | read-write | The type of Zero Code Suppression used on this interface. B8ZS refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data. |
| INT tdmIoDS1PortLoopbackState | 1.3.6.1.4.1.5812.3.4.1.8 | INTEGER | read-only | This object indicates the state of loopback on this interface. 'Idle' indicates that there is no loopback running and 'running' indicates that this interface is in loopback mode. |
| INT tdmIoDS1PortLoopbackType | 1.3.6.1.4.1.5812.3.4.1.9 | INTEGER | read-write | This object indicates the type of loopback on this interface. noLoop - the interface is not in loopBack mode. localOn - the interface is running in internal loop. digitalOn - the interface is running in internal loop. remoteOn - the interface is looping away external data. |
| INT tdmIoDS1PortLoopbackResults | 1.3.6.1.4.1.5812.3.4.1.10 | INTEGER | read-only | Results from previous loopback on this port |
| INT tdmIoDS1PortLoopbackLLbActCode | 1.3.6.1.4.1.5812.3.4.1.11 | INTEGER | read-write | User code to enable Automatic Remote Loopback(ARL) |
| INT tdmIoDS1PortLoopbackLLbDeactCode | 1.3.6.1.4.1.5812.3.4.1.12 | INTEGER | read-write | User code to disable Automatic Remote Loopback(ARL) |
| INT tdmIoDS1PortLoopbackLlbActCodeLen | 1.3.6.1.4.1.5812.3.4.1.13 | INTEGER | read-write | Length of user code to enable Automatic Remote Loopback(ARL) |
| INT tdmIoDS1PortLoopbackLlbDeactCodeLen | 1.3.6.1.4.1.5812.3.4.1.14 | INTEGER | read-write | Length of user code to disable Automatic Remote Loopback(ARL) |
| INT tdmIoDS1PortLoopbackLlbControl | 1.3.6.1.4.1.5812.3.4.1.15 | INTEGER | read-write | LLBCODE(activate/deactivate) generation/monitoring control |
| INT tdmIoDS1PortLoopbackLlbGenPath | 1.3.6.1.4.1.5812.3.4.1.16 | INTEGER | read-write | The path (xmit/rcv) for LLBCODE generation |
| INT tdmIoDS1PortLoopbackLlbMonPath | 1.3.6.1.4.1.5812.3.4.1.17 | INTEGER | read-write | The path (xmit/rcv) for LLBCODE monitoring |
| INT tdmIoDS1PortPrbsAlgorithm | 1.3.6.1.4.1.5812.3.4.1.18 | INTEGER | read-write | The PRBS Algorithm |
| INT tdmIoDS1PortPrbsInversion | 1.3.6.1.4.1.5812.3.4.1.19 | INTEGER | read-only | Whether the PRBS stream will be inverted |
| INT tdmIoDS1PortPrbsGenPath | 1.3.6.1.4.1.5812.3.4.1.20 | INTEGER | read-write | The PRBS generator path |
| INT tdmIoDS1PortPrbsMonPath | 1.3.6.1.4.1.5812.3.4.1.21 | INTEGER | read-write | The PRBS monitor path |
| INT tdmIoDS1PortPrbsMonitor | 1.3.6.1.4.1.5812.3.4.1.22 | INTEGER | read-write | PRBS monitor - is it off or on? |
| INT tdmIoDS1PortPrbsTransmit | 1.3.6.1.4.1.5812.3.4.1.23 | INTEGER | read-write | PRBS or normal transmission on transmission line |
| CTR tdmIoDS1PortPrbsBec | 1.3.6.1.4.1.5812.3.4.1.24 | Counter | read-only | The PRBS bit error counter |
| INT tdmIoDS1PortBertState | 1.3.6.1.4.1.5812.3.4.1.25 | INTEGER | read-only | User specified BERT status |
| INT tdmIoDS1PortBertPattern | 1.3.6.1.4.1.5812.3.4.1.26 | INTEGER | read-write | User specified BERT type |
| INT tdmIoDS1PortBertDuration | 1.3.6.1.4.1.5812.3.4.1.27 | INTEGER | read-write | User specified BERT duration |
| INT tdmIoDS1PortBertResults | 1.3.6.1.4.1.5812.3.4.1.28 | INTEGER | read-only | Results from previous BERT test on this port |
| INT tdmIoDS1PortLineESS15Min | 1.3.6.1.4.1.5812.3.4.1.29 | INTEGER | read-write | The 15 minute Line Errored Seconds Threshold |
| INT tdmIoDS1PortPathESS15Min | 1.3.6.1.4.1.5812.3.4.1.30 | INTEGER | read-write | The 15 minute Path Errored Seconds Threshold |
| INT tdmIoDS1PortLineESS1Day | 1.3.6.1.4.1.5812.3.4.1.31 | INTEGER | read-write | The 1 Day Line Errored Seconds Threshold |
| INT tdmIoDS1PortPathESS1Day | 1.3.6.1.4.1.5812.3.4.1.32 | INTEGER | read-write | The 1 Day Path Errored Seconds Threshold |
| INT tdmIoDS1PortPathCVS15Min | 1.3.6.1.4.1.5812.3.4.1.33 | INTEGER | read-write | The 15 minute Path Coding Violations Threshold |
| INT tdmIoDS1PortPathCVS1Day | 1.3.6.1.4.1.5812.3.4.1.34 | INTEGER | read-write | The 1 day Path Coding Violations Threshold |
| INT tdmIoDS1PortPathSESS15Min | 1.3.6.1.4.1.5812.3.4.1.35 | INTEGER | read-write | The 15 minute Path Severely Errored Seconds Threshold |
| INT tdmIoDS1PortPathSESS1Day | 1.3.6.1.4.1.5812.3.4.1.36 | INTEGER | read-write | The 1 day Path Severely Errored Seconds Threshold |
| INT tdmIoDS1PortPathSASS15Min | 1.3.6.1.4.1.5812.3.4.1.37 | INTEGER | read-write | The 15 minute Path AIS seconds Threshold |
| INT tdmIoDS1PortPathSASS1Day | 1.3.6.1.4.1.5812.3.4.1.38 | INTEGER | read-write | The 1 day Path AIS seconds Threshold |
| INT tdmIoDS1PortPathCSS15Min | 1.3.6.1.4.1.5812.3.4.1.39 | INTEGER | read-write | The 15 minute path controlled slip seconds threshold |
| INT tdmIoDS1PortPathCSS1Day | 1.3.6.1.4.1.5812.3.4.1.40 | INTEGER | read-write | The 1 day path controlled slip seconds threshold |
| INT tdmIoDS1PortPathUASS15Min | 1.3.6.1.4.1.5812.3.4.1.41 | INTEGER | read-write | The 15 minute path unavailable seconds threshold |
| INT tdmIoDS1PortRowStatus | 1.3.6.1.4.1.5812.3.4.1.42 | INTEGER | read-write | This variable is used to create or delete instances of TDM IO DS1 ports. This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port |
| INT dsxStatus | 1.3.6.1.4.1.5812.3.4.1.43 | INTEGER | accessible-for-notify | DSx line status. |
| INT tdmIoDS1PortLCVCount | 1.3.6.1.4.1.5812.3.4.1.44 | INTEGER | read-only | Count of Line Code Violations. |
| sonetPortTable | 1.3.6.1.4.1.5812.3.5 | not-accessible | The proprietary SONET Port Table | |
| sonetPortEntry | 1.3.6.1.4.1.5812.3.5.1 | not-accessible | Entry containing information about SONET ports | |
| INT sonetPortType | 1.3.6.1.4.1.5812.3.5.1.1 | INTEGER | read-write | The type of SONET port |
| OCT sonetPortIdString | 1.3.6.1.4.1.5812.3.5.1.2 | OCTET STRING | read-write | The identifier string for the SONET port |
| INT sonetPortTiming | 1.3.6.1.4.1.5812.3.5.1.3 | INTEGER | read-write | Clock source for the port |
| INT sonetPortLoopback | 1.3.6.1.4.1.5812.3.5.1.4 | INTEGER | read-write | The types of loopback available on the SONET interface. |
| INT sonetPortScrambling | 1.3.6.1.4.1.5812.3.5.1.5 | INTEGER | read-write | Whether port scrambling is enabled or disabled |
| INT sonetPortChannelization | 1.3.6.1.4.1.5812.3.5.1.6 | INTEGER | read-write | Whether the physical port is concatenated or not |
| U32 sonetPortConfigedChans | 1.3.6.1.4.1.5812.3.5.1.7 | Unsigned32 | read-only | The channels configured on the port |
| INT sonetPortSectESS15Min | 1.3.6.1.4.1.5812.3.5.1.8 | INTEGER | read-write | 15 minute section errored seconds threshold |
| INT sonetPortLineESS15Min | 1.3.6.1.4.1.5812.3.5.1.9 | INTEGER | read-write | 15 minute line errored seconds threshold |
| INT sonetPortPathESS15Min | 1.3.6.1.4.1.5812.3.5.1.10 | INTEGER | read-write | 15 minute path errored seconds threshold |
| INT sonetPortSectESS1Day | 1.3.6.1.4.1.5812.3.5.1.11 | INTEGER | read-write | 1 day section errored seconds threshold |
| INT sonetPortLineESS1Day | 1.3.6.1.4.1.5812.3.5.1.12 | INTEGER | read-write | 1 day line errored seconds threshold |
| INT sonetPortPathESS1Day | 1.3.6.1.4.1.5812.3.5.1.13 | INTEGER | read-write | 1 day path errored seconds threshold |
| INT sonetPortSectCVS15Min | 1.3.6.1.4.1.5812.3.5.1.14 | INTEGER | read-write | 15 minute section coding violations threshold |
| INT sonetPortLineCVS15Min | 1.3.6.1.4.1.5812.3.5.1.15 | INTEGER | read-write | 15 minute line coding violations threshold |
| INT sonetPortPathCVS15Min | 1.3.6.1.4.1.5812.3.5.1.16 | INTEGER | read-write | 15 minutes path coding violations threshold |
| INT sonetPortSectCVS1Day | 1.3.6.1.4.1.5812.3.5.1.17 | INTEGER | read-write | 1 day section coding violations threshold |
| INT sonetPortLineCVS1Day | 1.3.6.1.4.1.5812.3.5.1.18 | INTEGER | read-write | 1 day line coding violations threshold |
| INT sonetPortPathCVS1Day | 1.3.6.1.4.1.5812.3.5.1.19 | INTEGER | read-write | 1 day path coding violations threshold |
| INT sonetPortSectSESS15Min | 1.3.6.1.4.1.5812.3.5.1.20 | INTEGER | read-write | 15 minutes section severely errored seconds threshold |
| INT sonetPortLineSESS15Min | 1.3.6.1.4.1.5812.3.5.1.21 | INTEGER | read-write | 15 minutes line severely errored seconds threshold |
| INT sonetPortPathSESS15Min | 1.3.6.1.4.1.5812.3.5.1.22 | INTEGER | read-write | 15 minutes path severely errored seconds threshold |
| INT sonetPortSectSESS1Day | 1.3.6.1.4.1.5812.3.5.1.23 | INTEGER | read-write | 1 day section severely errored seconds threshold |
| INT sonetPortLineSESS1Day | 1.3.6.1.4.1.5812.3.5.1.24 | INTEGER | read-write | 1 day line severely errored seconds threshold |
| INT sonetPortPathSESS1Day | 1.3.6.1.4.1.5812.3.5.1.25 | INTEGER | read-write | 1 day path severely errored seconds threshold |
| INT sonetPortLineUASS15Min | 1.3.6.1.4.1.5812.3.5.1.26 | INTEGER | read-write | 15 minutes line unavailable seconds threshold |
| INT sonetPortPathUASS15Min | 1.3.6.1.4.1.5812.3.5.1.27 | INTEGER | read-write | 15 minutes path unavailable seconds threshold |
| INT sonetPortLineUASS1Day | 1.3.6.1.4.1.5812.3.5.1.28 | INTEGER | read-write | 1 day line unavailable seconds threshold |
| INT sonetPortPathUASS1Day | 1.3.6.1.4.1.5812.3.5.1.29 | INTEGER | read-write | 1 day path unavailable seconds threshold |
| INT sonetPortRowStatus | 1.3.6.1.4.1.5812.3.5.1.30 | INTEGER | read-write | This variable is used to create or delete instances of SONET ports This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port |
| INT sonetTCAStatus | 1.3.6.1.4.1.5812.3.5.1.31 | INTEGER | accessible-for-notify | Represents the Threshold Crossing Alarm. |
| atmPortTable | 1.3.6.1.4.1.5812.3.6 | not-accessible | The ATM Port Table | |
| atmPortEntry | 1.3.6.1.4.1.5812.3.6.1 | not-accessible | Entry containing information about atm ports | |
| T/F atmPortVPTunnel | 1.3.6.1.4.1.5812.3.6.1.1 | TruthValue | read-write | Whether this port is a VP Tunnel |
| INT atmPortMaxTotalBits | 1.3.6.1.4.1.5812.3.6.1.2 | INTEGER | read-only | Max Total Bits of VPI & VCI |
| INT atmPortTiming | 1.3.6.1.4.1.5812.3.6.1.3 | INTEGER | read-write | Timing Mode |
| C32 atmPortInCells | 1.3.6.1.4.1.5812.3.6.1.4 | Counter32 | read-only | Input Cell Count |
| C32 atmPortOutCells | 1.3.6.1.4.1.5812.3.6.1.5 | Counter32 | read-only | Output Cell Count |
| INT atmPortCDVT | 1.3.6.1.4.1.5812.3.6.1.6 | INTEGER | read-write | Cell Delay Variation Tolerance (CDVT) is measured in units of seconds per cell. For OC12c ATM the link rate is approximately 1.4 million cells per second, each cell time being approximately 700 nanoseconds. Its value is initialized to 50,000 which is approximately 0.7% of the OC12c line rate. The value ranges from 5,000 to 100,000 which gives us a CDVT range of 7 to 141 cell times. |
| OCT atmPortMaxActvBits | 1.3.6.1.4.1.5812.3.6.1.7 | OCTET STRING | read-write | Maximum active VPI/VCI bits |
| C64 atmPortHCInCells | 1.3.6.1.4.1.5812.3.6.1.8 | Counter64 | read-only | 64 bit input cell count |
| C64 atmPortHCOutCells | 1.3.6.1.4.1.5812.3.6.1.9 | Counter64 | read-only | 64 bit output cell count |
| INT atmPortRowStatus | 1.3.6.1.4.1.5812.3.6.1.10 | INTEGER | read-write | This variable is used to create or delete instances of atm ports This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port |
| opticalPortTable | 1.3.6.1.4.1.5812.3.7 | not-accessible | The Optical Port Table | |
| opticalPortEntry | 1.3.6.1.4.1.5812.3.7.1 | not-accessible | This describes the attributes of optical ports in the system | |
| INT _pysmi_lambda | 1.3.6.1.4.1.5812.3.7.1.1 | INTEGER | not-accessible | The purpose of this variable is to be used as the third component of the index into the optical port table |
| INT opticalPortMode | 1.3.6.1.4.1.5812.3.7.1.2 | INTEGER | read-write | The mode of operation of the port. This is set initially by the user and can only be changed by the user. It is not a status. By default, all optical ports in the system come up as working. They have to be explicitly configured to work in a protected mode or to be turned off. |
| INT opticalPortRxSMselect | 1.3.6.1.4.1.5812.3.7.1.3 | INTEGER | not-accessible | This object selects which lambda to send over the back-plane to the different switch module. |
| INT opticalPortTxSMselect | 1.3.6.1.4.1.5812.3.7.1.4 | INTEGER | read-write | Selects between lambda feeds on the back plane wich originate in different switch module. |
| INT opticalPortRxSignalState | 1.3.6.1.4.1.5812.3.7.1.5 | INTEGER | read-only | Provides the status of the received optical signal - whether it is detected or not. |
| INT opticalPortRxFrameState | 1.3.6.1.4.1.5812.3.7.1.6 | INTEGER | read-only | Frame state of signal as detected by SW at SONET framer. This state is auto set by software. |
| INT opticalPortTxStatus | 1.3.6.1.4.1.5812.3.7.1.7 | INTEGER | read-only | Provides the status of the transmitter for the optical port. This provides the operational condition of the transmitter. The value of it could be 'Good' even though it is not transmitting any signal due to some reason. |
| INT opticalPortTxEnable | 1.3.6.1.4.1.5812.3.7.1.8 | INTEGER | read-write | Whether the transmission of data and interrupts on the optical port is enabled or disabled |
| INT opticalPortLaserPowerLevel | 1.3.6.1.4.1.5812.3.7.1.9 | INTEGER | not-accessible | The laser power level on the port - this variable is useful for tunable lasers. Currently will return a value of high(1) |
| INT opticalPortLaserWavelength | 1.3.6.1.4.1.5812.3.7.1.10 | INTEGER | read-write | Laser wavelength on the optical port. Currently will return 1 for DWDM ports, 2 for 1310 ports, 3 for 1550 ports and 4 for ports that support both 1310 and 1550 nm wavelengths. This value however will be overshadowed by a 1310 or 1550 wavelength card present in that system. The list will be expanded later to give the exact 15xx wavelength. Useful for tunable lasers to control the 15xx wavelength |
| INT opticalPortRowStatus | 1.3.6.1.4.1.5812.3.7.1.11 | INTEGER | read-write | This variable is used to create or delete instances of optical port |
| ringPortTable | 1.3.6.1.4.1.5812.3.8 | not-accessible | A table containing ring port variables. | |
| ringPortEntry | 1.3.6.1.4.1.5812.3.8.1 | not-accessible | Entry in the table for a single ring port. | |
| T/F ringPortArbiterEnabled | 1.3.6.1.4.1.5812.3.8.1.1 | TruthValue | read-write | The arbiter enabled Boolean defines whether the ring port Arbitration Logic is enabled or not. The Arbitration Logic services requests for extra data columns from an elastic bandwidth pool. |
| INT ringPortFrameMode | 1.3.6.1.4.1.5812.3.8.1.2 | INTEGER | read-write | The frame mode defines the data path mode of the ring port. The choices include AXSON and POS. AXSON frame mode means the ring encapsulates data inside AXSON frames, and POS means data is encapsulated using the Packet over SONET standard HDLC mechanism. |
| INT ringPortMaxChannels | 1.3.6.1.4.1.5812.3.8.1.3 | INTEGER | read-write | The max channels parameter sizes the number of AxSON channels supported on the ring port. This determines number of ingress and egress queues and the amount of queue memory available. |
| INT ringPortMaxSubChannels | 1.3.6.1.4.1.5812.3.8.1.4 | INTEGER | read-write | The max sub-channels parameter sizes the number of AxSON sub-channels supported in a particular AxSON channel. This determines the amount of queue memory required. |
| T/F ringPortAutoQueueSizing | 1.3.6.1.4.1.5812.3.8.1.5 | TruthValue | read-write | Defines whether Axson channel queues may be automatically resized during provisioning. |
| INT ringPortRingMode | 1.3.6.1.4.1.5812.3.8.1.6 | INTEGER | read-write | Whether the ring port is connected to the working ring or the protected ring |
| INT ringPortNodeId | 1.3.6.1.4.1.5812.3.8.1.7 | INTEGER | read-write | This defines the temporal discovery of the node in the logical ring |
| INT ringPortAdminStatus | 1.3.6.1.4.1.5812.3.8.1.8 | INTEGER | read-write | Gives the possible ringPort Administration Status . |
| INT ringPortOperStatus | 1.3.6.1.4.1.5812.3.8.1.9 | INTEGER | read-only | Gives the ringPortNodeId operational status of the AXSON interface . |
| CTR ringPortRxFrames | 1.3.6.1.4.1.5812.3.8.1.10 | Counter | read-only | This object sepcifies the number of frames received at this interface. |
| CTR ringPortRxFrameErrors | 1.3.6.1.4.1.5812.3.8.1.11 | Counter | read-only | Number of errored frames received at this interface. |
| CTR ringPortTxFrames | 1.3.6.1.4.1.5812.3.8.1.12 | Counter | read-only | This object sepcifies the number of frames transmitted from this interface. |
| INT ringPortMaxTDMChannels | 1.3.6.1.4.1.5812.3.8.1.13 | INTEGER | read-write | The maximum number of TDM channels supported on the ring |
| INT ringPortK1K2Status | 1.3.6.1.4.1.5812.3.8.1.14 | INTEGER | accessible-for-notify | The status indicated by the K1,K2 bytes in the SONET frame overhead |
| INT ringPortAISStatus | 1.3.6.1.4.1.5812.3.8.1.15 | INTEGER | accessible-for-notify | The status indicated by the AIS bytes in the SONET frame overhead |
| INT ringPortPHYStatus | 1.3.6.1.4.1.5812.3.8.1.16 | INTEGER | accessible-for-notify | The physical status of the ring port. |
| tdmIoDS3PortTable | 1.3.6.1.4.1.5812.3.9 | not-accessible | The DS3 TDM IO Port Table | |
| tdmIoDS3PortEntry | 1.3.6.1.4.1.5812.3.9.1 | not-accessible | Entry containing information about TDM IO DS3 ports | |
| INT tdmIoDS3PortPBitESS15Min | 1.3.6.1.4.1.5812.3.9.1.1 | INTEGER | read-write | 15 minute threshold for P-Bit Errored Seconds |
| INT tdmIoDS3PortPBitESS1Day | 1.3.6.1.4.1.5812.3.9.1.2 | INTEGER | read-write | 1 day threshold for P-Bit Errored Seconds |
| INT tdmIoDS3PortPBitSESS15Min | 1.3.6.1.4.1.5812.3.9.1.3 | INTEGER | read-write | 15 minute threshold for P-Bit Severely Errored Seconds |
| INT tdmIoDS3PortPBitSESS1Day | 1.3.6.1.4.1.5812.3.9.1.4 | INTEGER | read-write | 1 day threshold for P-Bit Severely Errored Seconds |
| INT tdmIoDS3PortSEFSS15Min | 1.3.6.1.4.1.5812.3.9.1.5 | INTEGER | read-write | 15 minute threshold for Severely Errored Framing Seconds |
| INT tdmIoDS3PortSEFSS1Day | 1.3.6.1.4.1.5812.3.9.1.6 | INTEGER | read-write | 1 day threshold for Severely Errored Framing Seconds |
| INT tdmIoDS3PortUASS15Min | 1.3.6.1.4.1.5812.3.9.1.7 | INTEGER | read-write | 15 minute threshold for Severely Errored Framing Seconds |
| INT tdmIoDS3PortUASS1Day | 1.3.6.1.4.1.5812.3.9.1.8 | INTEGER | read-write | 1 day threshold for Unavailable Seconds |
| INT tdmIoDS3PortLineCVS15Min | 1.3.6.1.4.1.5812.3.9.1.9 | INTEGER | read-write | 15 minute threshold for Line-Coding Violations |
| INT tdmIoDS3PortLineCVS1Day | 1.3.6.1.4.1.5812.3.9.1.10 | INTEGER | read-write | 1 day threshold for Line-Coding Violations |
| INT tdmIoDS3PortPBitCVS15Min | 1.3.6.1.4.1.5812.3.9.1.11 | INTEGER | read-write | 15 minute threshold for P-Bit Coding Violations |
| INT tdmIoDS3PortPBitCVS1Day | 1.3.6.1.4.1.5812.3.9.1.12 | INTEGER | read-write | 1 day threshold for P-Bit Coding Violations |
| INT tdmIoDS3PortLineESS15Min | 1.3.6.1.4.1.5812.3.9.1.13 | INTEGER | read-write | 15 minute threshold for Line Errored Seconds |
| INT tdmIoDS3PortLineESS1Day | 1.3.6.1.4.1.5812.3.9.1.14 | INTEGER | read-write | 1 day threshold for Line Errored Seconds |
| INT tdmIoDS3PortCBitCVS15Min | 1.3.6.1.4.1.5812.3.9.1.15 | INTEGER | read-write | 15 minute threshold for C-Bit Coding Violations |
| INT tdmIoDS3PortCBitCVS1Day | 1.3.6.1.4.1.5812.3.9.1.16 | INTEGER | read-write | 1 day threshold for C-Bit Coding Violations |
| INT tdmIoDS3PortCBitESS15Min | 1.3.6.1.4.1.5812.3.9.1.17 | INTEGER | read-write | 15 minute threshold for C-Bit Errored Seconds |
| INT tdmIoDS3PortCBitESS1Day | 1.3.6.1.4.1.5812.3.9.1.18 | INTEGER | read-write | 1 day threshold for C-Bit Errored Seconds |
| INT tdmIoDS3PortCBitSESS15Min | 1.3.6.1.4.1.5812.3.9.1.19 | INTEGER | read-write | 15 minute threshold for C-Bit Severely Errored Seconds |
| INT tdmIoDS3PortCBitSESS1Day | 1.3.6.1.4.1.5812.3.9.1.20 | INTEGER | read-write | 1 day threshold for C-Bit Severely Errored Seconds |
| INT tdmIoDS3PortRowStatus | 1.3.6.1.4.1.5812.3.9.1.21 | INTEGER | read-write | This variable is used to create or delete instances of TDM IO DS3 ports. This variable subsumes the admin state variable, and once the row is created, its value returns the admin state of the port |
| posPortTable | 1.3.6.1.4.1.5812.3.10 | not-accessible | The POS Port Table | |
| posPortEntry | 1.3.6.1.4.1.5812.3.10.1 | not-accessible | Entry containing information about POS ports | |
| C32 posPortTransportSegmentCount | 1.3.6.1.4.1.5812.3.10.1.1 | Counter32 | read-only | Number of provisioned connections on port. |
| INT posPortMode | 1.3.6.1.4.1.5812.3.10.1.2 | INTEGER | read-write | mode of operation. |
| U32 posPortDefaultVID | 1.3.6.1.4.1.5812.3.10.1.3 | Unsigned32 | read-write | Port's default VLAN ID. |
| INT posPortMinPktSize | 1.3.6.1.4.1.5812.3.10.1.4 | INTEGER | read-write | It is defined as the minimum number of bytes encapsulated in the POS frame including the FCS, but excluding byte stuffing. |
| INT posPortMaxPktSize | 1.3.6.1.4.1.5812.3.10.1.5 | INTEGER | read-write | It is defined as the maximum number of bytes encapsulated in the POS frame including the FCS, but excluding byte stuffing. |
| C32 posPortMinPktViolations | 1.3.6.1.4.1.5812.3.10.1.6 | Counter32 | read-only | This object gives the number of times the system had detected a packet of size less than the acceptable minimum. |
| C32 posPortMaxPktViolations | 1.3.6.1.4.1.5812.3.10.1.7 | Counter32 | read-only | This object gives the number of times the system had detected a packet of size greater than the acceptable minimum. |
RFC description
Generic port management MIB; standard interface for monitoring and configuring physical and logical port properties across network devices.
Start monitoring Coriolis Networks optical switch/chassis line cards (per-port optical status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.