OPTIX-SONET-PER-MIB

All MIBs › OPTIX-SONET-PER-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2006-02-25

Category: Optical Networking

Description: Collects SONET performance monitoring counters (ES, SES, CV, UAS) for Huawei OptiX transport equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OPTIX-SONET-PER-MIB?

OPTIX-SONET-PER-MIB is a Huawei proprietary MIB for the OptiX line of SONET/SDH optical transport equipment, focused on collecting SONET performance monitoring counters at the physical and line layers. It exposes performance data such as Errored Seconds (ES), Severely Errored Seconds (SES), Coding Violations (CV), and Unavailable Seconds (UAS), typically organized per interface and per monitoring interval (15-minute and 24-hour bins), consistent with standard SONET performance monitoring practice. This MIB is fundamentally about monitoring the health of optical transport hardware and links: rising ES/SES/CV/UAS counts on a given SONET interface reveal degrading optical signal quality, fiber issues, or equipment faults before they escalate to a full outage, making these counters key early-warning indicators for carrier-grade transport circuits. It closely parallels and likely extends the structure of the standard SONET/SDH MIB (RFC 3592 SONET-MIB) performance tables. It is typically deployed on Huawei OptiX SDH/SONET transport network elements in carrier backbone and metro optical networks. Engineers can download the OPTIX-SONET-PER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OPTIX-SONET-PER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei OptiX SDH/SONET optical transport network elements

Monitoring Examples

Since no sample_objects were provided for this MIB, exact table names cannot be grounded from source data, but consistent with standard SONET performance MIB structure an administrator would poll per-interface ES, SES, CV, and UAS counters over 15-minute and 24-hour intervals to detect a degrading optical line. A steadily increasing SES count on one interface while others remain at zero would reveal an intermittent fiber or transceiver problem on that specific circuit. This MIB should be interpreted in line with the standard SONET-MIB performance monitoring model it mirrors.

What Can Be Monitored

Errored Seconds (ES)
Severely Errored Seconds (SES)
Coding Violations (CV)
Unavailable Seconds (UAS)
per-interval SONET performance counters

Imported Objects

From OPTIX-OID-MIB

optixCommonSonet

OBJECT-IDENTITY

From OPTIX-SONET-TC-MIB

DirectionType
LocationType
MOD2Type
PerformanceEventType
ValidflagType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
optixSonetPerformance	1.3.6.1.4.1.2011.2.25.3.20.20			Description.
pmData	1.3.6.1.4.1.2011.2.25.3.20.20.10
per15mCurDataTable	1.3.6.1.4.1.2011.2.25.3.20.20.10.10		not-accessible	instructs an NE to send its current set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
per15mCurDataEntry	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1		not-accessible	instructs an NE to send its current set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
MOD pm15mCurDataMOD2	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.1	MOD2Type	read-only	Signal mode.
U32 pm15mCurDataSlot	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.2	Unsigned32	read-only	Slot number. This will indicate what is the slot of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm15mCurDataPort	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.3	Unsigned32	read-only	Port number. This will indicate what is the Port of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm15mCurDataPath	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.4	Unsigned32	read-only	Path number. This will indicate what is the Path of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm15mCurDataVT	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.5	Unsigned32	read-only	VT path number. This will indicate what is the VT path of the object which raised this PM data. If not relevant to the PM data, will be zero.
PER pm15mCurDataName	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.6	PerformanceEventType	read-only	Indicates the type of monitored parameter for which a value is retrieved.
LOC pm15mCurDataLocation	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.7	LocationType	read-only	Indicates the location. Only NEND(Near end)\|FEND(Far end)\|ALL will be represented here.
DIR pm15mCurDataDirection	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.8	DirectionType	read-only	specifies the direction of monitoring. Only RCV(Receive direction)\|TRMT(Transmit direction)\|ALL will be represented here.
I32 pm15mCurDataMonVal	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.9	Integer32	read-only	Measured value.
VAL pm15mCurDataVldty	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.10	ValidflagType	read-only	It indicates whether the information for the specified time period was accumulated over the entire time period or some portion of it. Only INVALID\|VALID will be represented here.
DAT pm15mCurDataStartTime	1.3.6.1.4.1.2011.2.25.3.20.20.10.10.1.11	DateAndTime	read-only	The beginning date and time of the PM period.
per15mHisDataTable	1.3.6.1.4.1.2011.2.25.3.20.20.10.20		not-accessible	instructs an NE to send its history set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
per15mHisDataEntry	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1		not-accessible	instructs an NE to send its history set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
MOD pm15mHisDataMOD2	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.1	MOD2Type	read-only	Signal mode.
U32 pm15mHisDataSlot	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.2	Unsigned32	read-only	Slot number. This will indicate what is the slot of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm15mHisDataPort	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.3	Unsigned32	read-only	Port number. This will indicate what is the Port of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm15mHisDataPath	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.4	Unsigned32	read-only	Path number. This will indicate what is the Path of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm15mHisDataVT	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.5	Unsigned32	read-only	VT path number. This will indicate what is the VT path of the object which raised this PM data. If not relevant to the PM data, will be zero.
PER pm15mHisDataName	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.6	PerformanceEventType	read-only	Indicates the type of monitored parameter for which a value is retrieved.
LOC pm15mHisDataLocation	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.7	LocationType	read-only	Indicates the location. Only NEND(Near end)\|FEND(Far end)\|ALL will be represented here.
DIR pm15mHisDataDirection	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.8	DirectionType	read-only	Specifies the direction of monitoring. Only RCV(Receive direction)\|TRMT(Transmit direction)\|ALL will be represented here.
U32 pm15mHisDataInterval	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.9	Unsigned32	read-only	The period number.
I32 pm15mHisDataMonVal	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.10	Integer32	read-only	Measured value.
VAL pm15mHisDataVldty	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.11	ValidflagType	read-only	It indicates whether the information for the specified time period was accumulated over the entire time period or some portion of it. Only INVALID\|VALID will be represented here.
DAT pm15mHisDataStartTime	1.3.6.1.4.1.2011.2.25.3.20.20.10.20.1.12	DateAndTime	read-only	The beginning date and time of the PM period.
per1dayCurDataTable	1.3.6.1.4.1.2011.2.25.3.20.20.10.30		not-accessible	instructs an NE to send its current set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
per1dayCurDataEntry	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1		not-accessible	instructs an NE to send its current set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
MOD pm1dayCurDataMOD2	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.1	MOD2Type	read-only	Signal mode.
U32 pm1dayCurDataSlot	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.2	Unsigned32	read-only	Slot number. This will indicate what is the slot of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm1dayCurDataPort	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.3	Unsigned32	read-only	Port number. This will indicate what is the Port of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm1dayCurDataPath	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.4	Unsigned32	read-only	Path number. This will indicate what is the Path of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm1dayCurDataVT	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.5	Unsigned32	read-only	VT path number. This will indicate what is the VT path of the object which raised this PM data. If not relevant to the PM data, will be zero.
PER pm1dayCurDataName	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.6	PerformanceEventType	read-only	Indicates the type of monitored parameter for which a value is retrieved.
LOC pm1dayCurDataLocation	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.7	LocationType	read-only	Indicates the location. Only NEND(Near end)\|FEND(Far end)\|ALL will be represented here.
DIR pm1dayCurDataDirection	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.8	DirectionType	read-only	Specifies the direction of monitoring. Only RCV(Receive direction)\|TRMT(Transmit direction)\|ALL will be represented here.
I32 pm1dayCurDataMonVal	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.9	Integer32	read-only	measured value.
VAL pm1dayCurDataVldty	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.10	ValidflagType	read-only	It indicates whether the information for the specified time period was accumulated over the entire time period or some portion of it. Only INVALID\|VALID will be represented here.
DAT pm1dayCurDataStartTime	1.3.6.1.4.1.2011.2.25.3.20.20.10.30.1.11	DateAndTime	read-only	The beginning date and time of the PM period.
per1dayHisDataTable	1.3.6.1.4.1.2011.2.25.3.20.20.10.40		not-accessible	instructs an NE to send its history set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
per1dayHisDataEntry	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1		not-accessible	instructs an NE to send its history set of PM data associated with one or more equipment units, facilities, links, or signaling links within the NE.
MOD pm1dayHisDataMOD2	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.1	MOD2Type	read-only	Signal mode.
U32 pm1dayHisDataSlot	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.2	Unsigned32	read-only	Slot number. This will indicate what is the slot of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm1dayHisDataPort	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.3	Unsigned32	read-only	Port number. This will indicate what is the Port of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm1dayHisDataPath	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.4	Unsigned32	read-only	Path number. This will indicate what is the Path of the object which raised this PM data. If not relevant to the PM data, will be zero.
U32 pm1dayHisDataVT	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.5	Unsigned32	read-only	VT path number. This will indicate what is the VT path of the object which raised this PM data. If not relevant to the PM data, will be zero.
PER pm1dayHisDataName	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.6	PerformanceEventType	read-only	Indicates the type of monitored parameter for which a value is retrieved.
LOC pm1dayHisDataLocation	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.7	LocationType	read-only	Indicates the location. Only NEND(Near end)\|FEND(Far end)\|ALL will be represented here.
DIR pm1dayHisDataDirection	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.8	DirectionType	read-only	Specifies the direction of monitoring. Only RCV(Receive direction)\|TRMT(Transmit direction)\|ALL will be represented here.
U32 pm1dayHisDataInterval	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.9	Unsigned32	read-only	The period number.
I32 pm1dayHisDataMonVal	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.10	Integer32	read-only	Measured value.
VAL pm1dayHisDataVldty	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.11	ValidflagType	read-only	It indicates whether the information for the specified time period was accumulated over the entire time period or some portion of it. Only INVALID\|VALID will be represented here.
DAT pm1dayHisDataStartTime	1.3.6.1.4.1.2011.2.25.3.20.20.10.40.1.12	DateAndTime	read-only	The beginning date and time of the PM period.
optixSonetPmConformance	1.3.6.1.4.1.2011.2.25.3.20.20.20
optixSonetPmGroups	1.3.6.1.4.1.2011.2.25.3.20.20.20.1
optixSonetPmObjectGroup	1.3.6.1.4.1.2011.2.25.3.20.20.20.1.1			Enter the description of the created OBJECT-GROUP.
optixSonetPmCompliances	1.3.6.1.4.1.2011.2.25.3.20.20.20.2
optixSonetPmBasicCompliance	1.3.6.1.4.1.2011.2.25.3.20.20.20.2.1			Enter the description of the created MODULE-COMPLIANCE.

RFC description

Huawei OPTIX SONET performance MIB describing performance monitoring interface for SONET transmission equipment.

Start monitoring Huawei OptiX SDH/SONET optical transport elements with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OPTIX-SONET-PER-MIB

What Is OPTIX-SONET-PER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description