All MIBs › TIMETRA-OAM-PM-MIB
Organization: Nokia
Last Updated: 2016-01-01
Category: Ethernet OAM, Nokia SR OS / Alcatel-Lucent 7750 SR
Description: Manages Nokia/Alcatel-Lucent 7750 SR OAM performance monitoring sessions and measurement data.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-OAM-PM-MIB?
TIMETRA-OAM-PM-MIB is a Nokia (SR OS) proprietary MIB implementing Service OAM Performance Monitoring — delay/loss measurement sessions (DMM/LMM/SLM per Y.1731/802.1ag) with configurable bin-based statistical aggregation. Its objects include last-changed timestamps for numerous configuration tables (bin groups, bins, sessions, Ethernet/IP sessions, delay-DMM, loss-SLM/LMM, measurement intervals, TWAMP-Light, TWAMP-Light reflector, threshold tables), and a bin-group table (ID, row status, admin status, description, forward/backward bin counts). As a configuration/performance MIB it lets an administrator confirm OAM PM session and threshold configuration for delay/loss measurement on a Nokia SR OS router. It is deployed on Nokia SR OS routers. Engineers can download the TIMETRA-OAM-PM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-OAM-PM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia SR OS routers
Monitoring Examples
An administrator checks tmnxOamPmCfgBinGroupTable and tmnxOamPmCfgThrDelayTableLastChg to confirm delay-measurement bin-group and threshold configuration on a Nokia SR OS router.
What Can Be Monitored
- Service OAM Performance Monitoring session and threshold configuration
This MIB depends on
Related MIBs
Imported Objects
From IEEE8021-CFM-MIB
| Dot1agCfmMepIdOrZero |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressPrefixLength | |
| InetAddressType | |
| InetPortNumber |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-SERV-MIB
| svcId | OBJECT-TYPE |
From TIMETRA-TC-MIB
| TFCName | |
| TItemDescription | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TProfile | |
| TmnxEnabledDisabled | |
| TmnxEnabledDisabledOrNA | |
| TmnxOperState |
How to Use in IPNetwork Monitor
Example using tmnxOamPmStsLossLmmTxFwd OID:
Select a Nokia SR OS router (Service OAM delay/loss performance-monitoring session status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxOamPmStsLossLmmTxFwd into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxOamPmStsLossLmmTxFwd indicates the number of service frames transmitted in the forward direction for the specified measurement interval data set. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in frames), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraOamPmMIBModule | 1.3.6.1.4.1.6527.1.1.3.92 | This document is the SNMP MIB module for the Nokia SROS implementation of Service OAM Performance Monitoring. Copyright 2013-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxOamPmConformance | 1.3.6.1.4.1.6527.3.1.1.92 | |||
| tmnxOamPmCompliances | 1.3.6.1.4.1.6527.3.1.1.92.1 | |||
| tmnxOamPmV12v0Compliance | 1.3.6.1.4.1.6527.3.1.1.92.1.1 | The compliance statement for management of OAM Performance Monitoring on Nokia SROS series systems, release 12.0. | ||
| tmnxOamPmV13v0Compliance | 1.3.6.1.4.1.6527.3.1.1.92.1.2 | The compliance statement for management of additional OAM Performance Monitoring objects on Nokia SROS series systems, release 13.0. | ||
| tmnxOamPmV14v0Compliance | 1.3.6.1.4.1.6527.3.1.1.92.1.3 | The compliance statement for management of additional OAM Performance Monitoring objects on Nokia SROS series systems, release 14.0. | ||
| tmnxOamPmObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.2 | |||
| tmnxOamPmV12v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.2.1 | |||
| tmnxOamPmV12v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.92.2.1.1 | The group of objects supporting the OAM Performance Monitoring functionality on Nokia SROS Release 12.0. | ||
| tmnxOamPmV13v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.2.2 | |||
| tmnxOamPmV13v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.92.2.2.1 | The group of additional objects supporting the OAM Performance Monitoring functionality on Nokia SROS Release 13.0. | ||
| tmnxOamPmV14v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.2.3 | |||
| tmnxOamPmV14v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.92.2.3.1 | The group of additional objects supporting the OAM Performance Monitoring functionality on Nokia SROS Release 14.0. | ||
| tmnxOamPmNotifGroups | 1.3.6.1.4.1.6527.3.1.1.92.3 | |||
| tmnxOamPmV12v0NotifGroups | 1.3.6.1.4.1.6527.3.1.1.92.3.1 | |||
| tmnxOamPmV13v0NotifGroups | 1.3.6.1.4.1.6527.3.1.1.92.3.2 | |||
| tmnxOamPmV13v0NotifGroup | 1.3.6.1.4.1.6527.3.1.1.92.3.2.1 | The group of OAM Performance Monitoring notifications supported by Nokia SROS Release 13.0. | ||
| tmnxOamPmNfyObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.4 | |||
| tmnxOamPmV12v0NfyObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.4.1 | |||
| tmnxOamPmV13v0NfyObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.4.2 | |||
| tmnxOamPmV13v0NotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.92.4.2.1 | The group of accessible-for-notify objects supporting the OAM Performance Monitoring functionality on Nokia SROS Release 13.0. | ||
| tmnxOamPmV14v0NfyObjGroups | 1.3.6.1.4.1.6527.3.1.1.92.4.3 | |||
| tmnxOamPmV14v0NotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.92.4.3.1 | The group of accessible-for-notify objects supporting the OAM Performance Monitoring functionality on Nokia SROS Release 14.0. | ||
| tmnxOamPmObjs | 1.3.6.1.4.1.6527.3.1.2.92 | |||
| tmnxOamPmCfgObjs | 1.3.6.1.4.1.6527.3.1.2.92.1 | |||
| tmnxOamPmCfgScalarObjs | 1.3.6.1.4.1.6527.3.1.2.92.1.1 | |||
| U32 tmnxOamPmCfgTwlRflInactTimer | 1.3.6.1.4.1.6527.3.1.2.92.1.1.1 | Unsigned32 | read-write | The value of tmnxOamPmCfgTwlRflInactTimer specifies the system inactivity timeout for TWAMP-Light reflectors. A TWAMP-Light reflector replies to TWAMP-Test PDUs. When a reflector sees a TWAMP-Test PDU for a new session (i.e. a {source IP address, source UDP port, destination IP address} triple which is not known to the reflector), the reflector allocates a record for the session. The record is used to ensure that reply PDUs sent for the session have consecutive sequence numbers. When a reflector sees tmnxOamPmCfgTwlRflInactTimer seconds pass without receiving a TWAMP-Test PDU for a particular session, an inactivity timeout has occurred, so the record allocated to the session is freed. |
| tmnxOamPmTableLastChgObjs | 1.3.6.1.4.1.6527.3.1.2.92.1.2 | |||
| TIM tmnxOamPmCfgBinGroupTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.1 | TimeStamp | read-only | The value of tmnxOamPmCfgBinGroupTableLastChg indicates the time, since system startup, when tmnxOamPmCfgBinGroupTable last changed. If tmnxOamPmCfgBinGroupTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgBinTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.2 | TimeStamp | read-only | The value of tmnxOamPmCfgBinTableLastChg indicates the time, since system startup, when tmnxOamPmCfgBinTable last changed. If tmnxOamPmCfgBinTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgSessTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.3 | TimeStamp | read-only | The value of tmnxOamPmCfgSessTableLastChg indicates the time, since system startup, when tmnxOamPmCfgSessTable last changed. If tmnxOamPmCfgSessTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgSessEthTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.4 | TimeStamp | read-only | The value of tmnxOamPmCfgSessEthTableLastChg indicates the time, since system startup, when tmnxOamPmCfgSessEthTable last changed. If tmnxOamPmCfgSessEthTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgDelayDmmTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.5 | TimeStamp | read-only | The value of tmnxOamPmCfgDelayDmmTableLastChg indicates the time, since system startup, when tmnxOamPmCfgDelayDmmTable last changed. If tmnxOamPmCfgDelayDmmTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgLossSlmTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.6 | TimeStamp | read-only | The value of tmnxOamPmCfgLossSlmTableLastChg indicates the time, since system startup, when tmnxOamPmCfgLossSlmTable last changed. If tmnxOamPmCfgLossSlmTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgMeasIntvlTableLstChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.7 | TimeStamp | read-only | The value of tmnxOamPmCfgMeasIntvlTableLstChg indicates the time, since system startup, when tmnxOamPmCfgMeasIntvlTable last changed. If tmnxOamPmCfgMeasIntvlTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgSessIpTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.8 | TimeStamp | read-only | The value of tmnxOamPmCfgSessIpTableLastChg indicates the time, since system startup, when tmnxOamPmCfgSessIpTable last changed. If tmnxOamPmCfgSessIpTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgTwampLtTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.9 | TimeStamp | read-only | The value of tmnxOamPmCfgTwampLtTableLastChg indicates the time, since system startup, when tmnxOamPmCfgTwampLtTable last changed. If tmnxOamPmCfgTwampLtTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgTwlRflTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.10 | TimeStamp | read-only | The value of tmnxOamPmCfgTwlRflTableLastChg indicates the time, since system startup, when tmnxOamPmCfgTwlRflTable last changed. If tmnxOamPmCfgTwlRflTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgTwlRflPfxTableLstChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.11 | TimeStamp | read-only | The value of tmnxOamPmCfgTwlRflPfxTableLstChg indicates the time, since system startup, when tmnxOamPmCfgTwlRflPfxTable last changed. If tmnxOamPmCfgTwlRflPfxTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgLossLmmTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.12 | TimeStamp | read-only | The value of tmnxOamPmCfgLossLmmTableLastChg indicates the time, since system startup, when tmnxOamPmCfgLossLmmTable last changed. If tmnxOamPmCfgLossLmmTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgThrLossFwBwTableLChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.13 | TimeStamp | read-only | The value of tmnxOamPmCfgThrLossFwBwTableLChg indicates the time, since system startup, when tmnxOamPmCfgThrLossFwBwTable last changed. If tmnxOamPmCfgThrLossFwBwTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgThrLossFwBwAgTableLC | 1.3.6.1.4.1.6527.3.1.2.92.1.2.14 | TimeStamp | read-only | The value of tmnxOamPmCfgThrLossFwBwAgTableLC indicates the time, since system startup, when tmnxOamPmCfgThrLossFwBwAgTable last changed. If tmnxOamPmCfgThrLossFwBwAgTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgThrDelayTableLastChg | 1.3.6.1.4.1.6527.3.1.2.92.1.2.15 | TimeStamp | read-only | The value of tmnxOamPmCfgThrDelayTableLastChg indicates the time, since system startup, when tmnxOamPmCfgThrDelayTable last changed. If tmnxOamPmCfgThrDelayTable has not changed since system startup, zero is returned. |
| TIM tmnxOamPmCfgBinGrpTypeDirTableLC | 1.3.6.1.4.1.6527.3.1.2.92.1.2.16 | TimeStamp | read-only | The value of tmnxOamPmCfgBinGrpTypeDirTableLC indicates the time, since system startup, when tmnxOamPmCfgBinGrpTypeDirTable last changed. If tmnxOamPmCfgBinGrpTypeDirTable has not changed since system startup, zero is returned. |
| tmnxOamPmCfgTableObjs | 1.3.6.1.4.1.6527.3.1.2.92.1.3 | |||
| tmnxOamPmCfgBinGroupTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1 | not-accessible | tmnxOamPmCfgBinGroupTable contains the configuration information for OAM Performance Monitoring bin groups. | |
| tmnxOamPmCfgBinGroupEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1 | not-accessible | tmnxOamPmCfgBinGroupEntry contains the configuration information for one OAM Performance Monitoring bin group. Bin group 1 is created by the system on a CPM restart. The configuration of bin group 1 is shown in the following table. Object Value -------------------------------- ------------------------------ tmnxOamPmCfgBinGroupId 1 tmnxOamPmCfgBinGroupRowStatus active(1) tmnxOamPmCfgBinGroupAdminStatus enabled(1) tmnxOamPmCfgBinGroupDescription 'OAM PM default bin group (not modifiable)' tmnxOamPmCfgBinGroupFdBinCount 3 tmnxOamPmCfgBinGroupFdrBinCount 2 tmnxOamPmCfgBinGroupIfdvBinCount 2 Bin group 1 cannot be changed or destroyed. The rest of the rows in this table are created or destroyed using tmnxOamPmCfgBinGroupRowStatus. When a row is created, the following objects must be set in the SNMP Set PDU: tmnxOamPmCfgBinGroupRowStatus tmnxOamPmCfgBinGroupFdBinCount tmnxOamPmCfgBinGroupFdrBinCount tmnxOamPmCfgBinGroupIfdvBinCount The value of the following objects cannot be changed after their row is created: tmnxOamPmCfgBinGroupFdBinCount tmnxOamPmCfgBinGroupFdrBinCount tmnxOamPmCfgBinGroupIfdvBinCount A row can be destroyed if its administrative status (tmnxOamPmCfgBinGroupAdminStatus) is disabled, and no OAM Performance Monitoring sessions refer to the bin group. | |
| TMN tmnxOamPmCfgBinGroupId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.1 | TmnxOamPmBinGroupId | not-accessible | The value of tmnxOamPmCfgBinGroupId specifies the bin group to be configured or read. |
| ROW tmnxOamPmCfgBinGroupRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.2 | RowStatus | read-create | The value of tmnxOamPmCfgBinGroupRowStatus specifies the status of the configuration row for the specified bin group. |
| TMN tmnxOamPmCfgBinGroupAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.3 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgBinGroupAdminStatus specifies whether or not the specified bin group is administratively enabled. An attempt to set this object to 'disabled(2)' will be rejected if tests referring to the specified bin group are enabled. An attempt to set this object to 'enabled(1)' will be rejected if one (or more) of the three sets of lower bounds for the specified bin group (as configured using tmnxOamPmCfgBinLowerBound) is not in strictly ascending order. For example, tmnxOamPmCfgBinGroupAdminStatus.255 cannot be set to 'enabled(1)' if the following lower bound values are configured. Object ID Value (in microseconds) ------------------------------------- ----------------------- tmnxOamPmCfgBinLowerBound.255.fd(1).1 5000 tmnxOamPmCfgBinLowerBound.255.fd(1).2 5000 tmnxOamPmCfgBinLowerBound.255.fd(1).3 5002 Setting this object to 'disabled(2)' deletes ALL the OAM-PM statistics for each test belonging to each session which refers to the specified bin group. For example, if session 'Sess1' has a DMM test and an SLM test configured, and 'Sess1' uses bin-group 255, then disabling bin-group 255 will delete all the DMM and SLM statistics for 'Sess1'. |
| TIT tmnxOamPmCfgBinGroupDescription | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.4 | TItemDescription | read-create | The value of tmnxOamPmCfgBinGroupDescription specifies the descriptive text for the specified bin group. |
| U32 tmnxOamPmCfgBinGroupFdBinCount | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.5 | Unsigned32 | read-create | The value of tmnxOamPmCfgBinGroupFdBinCount specifies the number of Frame Delay bins to be created for the specified bin group. There is no default value for this object. A value must be provided on row creation. See the DESCRIPTION clause for tmnxOamPmCfgBinGroupEntry for more information. |
| U32 tmnxOamPmCfgBinGroupFdrBinCount | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.6 | Unsigned32 | read-create | The value of tmnxOamPmCfgBinGroupFdrBinCount specifies the number of Frame Delay Range bins to be created for the specified bin group. There is no default value for this object. A value must be provided on row creation. See the DESCRIPTION clause for tmnxOamPmCfgBinGroupEntry for more information. |
| U32 tmnxOamPmCfgBinGroupIfdvBinCount | 1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.7 | Unsigned32 | read-create | The value of tmnxOamPmCfgBinGroupIfdvBinCount specifies the number of Inter-Frame Delay Variation bins to be created for the specified bin group. There is no default value for this object. A value must be provided on row creation. See the DESCRIPTION clause for tmnxOamPmCfgBinGroupEntry for more information. |
| tmnxOamPmCfgBinTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.2 | not-accessible | tmnxOamPmCfgBinTable contains the configuration information for OAM Performance Monitoring bins. | |
| tmnxOamPmCfgBinEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1 | not-accessible | tmnxOamPmCfgBinEntry contains the configuration information for one OAM Performance Monitoring bin. Rows are created in this table when one (or more) of the following objects is set: tmnxOamPmCfgBinGroupFdBinCount, tmnxOamPmCfgBinGroupFdrBinCount, or tmnxOamPmCfgBinGroupIfdvBinCount. Suppose, for example, that the following values are set for bin group 255. Object Value ------------------------------------ ----- tmnxOamPmCfgBinGroupFdBinCount.255 4 tmnxOamPmCfgBinGroupFdrBinCount.255 3 tmnxOamPmCfgBinGroupIfdvBinCount.255 2 Then, the following rows will be created in this table (where index columns are underlined with '#', column names have been abbreviated by replacing 'tmnxOamPmCfg' with '_', and the _BinLowerBound column shows the default values). _BinGroupId _BinGroupType _BinId _BinLowerBound (microsec) ########### ############# ###### ------------------------- 255 fd(1) 1 5000 255 fd(1) 2 10000 255 fd(1) 3 15000 255 fdr(2) 1 5000 255 fdr(2) 2 10000 255 ifdv(3) 1 5000 Note that tmnxOamPmCfgBinGroupFdBinCount.255 is 4, but there are only three corresponding rows in this table. The fourth bin is bin 0, which has a hard coded lower bound of 0 microseconds. Bin 0 never has a row in this table. The lower bounds for a particular {tmnxOamPmCfgBinGroupId, tmnxOamPmCfgBinType} pair must be strictly ascending. See the tmnxOamPmCfgBinGroupAdminStatus DESCRIPTION clause for more information. | |
| NUM tmnxOamPmCfgBinType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1.1 | TmnxOamPmBinType | not-accessible | The value of tmnxOamPmCfgBinType specifies the type of the bin to be configured or read. |
| TMN tmnxOamPmCfgBinNum | 1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1.2 | TmnxOamPmCfgBinNum | not-accessible | The value of tmnxOamPmCfgBinNum specifies the number of the bin to be configured or read. |
| U32 tmnxOamPmCfgBinLowerBound | 1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1.3 | Unsigned32 | read-write | The value of tmnxOamPmCfgBinLowerBound specifies the lower bound (in microseconds) for the specified bin. A lower bound can be changed if the administrative state (i.e. tmnxOamPmCfgBinGroupAdminStatus) for the parent bin group is disabled. Please see additional restrictions on setting lower bounds in the tmnxOamPmCfgBinEntry DESCRIPTION clause. The default lower bound for bin number 1 is 5000 microseconds. The default lower bound for a subsequent bin number is computed using defLowerBound(n) = defLowerBound(n-1) + (5000 microseconds). |
| tmnxOamPmCfgSessTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3 | not-accessible | tmnxOamPmCfgSessTable contains the configuration information for OAM Performance Monitoring sessions. | |
| tmnxOamPmCfgSessEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1 | not-accessible | tmnxOamPmCfgSessEntry contains the configuration information for one OAM Performance Monitoring session. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgSessRowStatus. An attempt to change the tmnxOamPmCfgSessBinGroupId value in a row (or an attempt to destroy the row) for a particular session will be rejected if an administratively enabled test (e.g. an SLM test) exists for the session. | |
| TNA tmnxOamPmCfgSessName | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.1 | TNamedItem | not-accessible | The value of tmnxOamPmCfgSessName specifies the name of the session to be configured or read. |
| ROW tmnxOamPmCfgSessRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.2 | RowStatus | read-create | The value of tmnxOamPmCfgSessRowStatus specifies the status of the configuration row for the specified session. |
| TMN tmnxOamPmCfgSessTestFamily | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.3 | TmnxOamPmTestFamily | read-create | The value of tmnxOamPmCfgSessTestFamily specifies the type of service (e.g. 'ethernet(1)') to be tested by the specified session. When a session is created, tmnxOamPmCfgSessRowStatus and tmnxOamPmCfgSessTestFamily must be specified in the same SNMP Set PDU. After a session is created, tmnxOamPmCfgSessTestFamily cannot be changed. |
| TMN tmnxOamPmCfgSessType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.4 | TmnxOamPmSessionType | read-create | The value of tmnxOamPmCfgSessType specifies the type (e.g. 'onDemand(2)') of the specified session. When a session is created, tmnxOamPmCfgSessRowStatus and tmnxOamPmCfgSessType can be specified in the same SNMP Set PDU. Or, tmnxOamPmCfgSessType can be left at its default value. After a session is created, tmnxOamPmCfgSessType cannot be changed. |
| TMN tmnxOamPmCfgSessBinGroupId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.5 | TmnxOamPmBinGroupId | read-create | The value of tmnxOamPmCfgSessBinGroupId specifies the bin group to be used by the specified session. Changing the bin group for a session deletes ALL the OAM-PM statistics for the session's tests. |
| TIT tmnxOamPmCfgSessDescription | 1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.6 | TItemDescription | read-create | The value of tmnxOamPmCfgSessDescription specifies the descriptive text for the specified session. |
| tmnxOamPmCfgSessEthTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4 | not-accessible | tmnxOamPmCfgSessEthTable contains the Ethernet endpoint configuration information for OAM Performance Monitoring sessions. | |
| tmnxOamPmCfgSessEthEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1 | not-accessible | tmnxOamPmCfgSessEthEntry contains the Ethernet endpoint configuration information for one OAM Performance Monitoring session. A row is created when a tmnxOamPmCfgSessTable row is created with tmnxOamPmCfgSessTestFamily = 'ethernet(1)'. A row is destroyed when a tmnxOamPmCfgSessTable row with tmnxOamPmCfgSessTestFamily = 'ethernet(1)' is destroyed. An attempt to change a value in a row for a particular session will be rejected if an administratively enabled test (e.g. an SLM test) exists for the session. | |
| DOT tmnxOamPmCfgSessEthSrcMepId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.1 | Dot1agCfmMepIdOrZero | read-write | The value of tmnxOamPmCfgSessEthSrcMepId specifies the source Ethernet Maintenance association End Point (MEP) identifier to be used by the specified session. Zero indicates a value has not been configured. |
| U32 tmnxOamPmCfgSessEthSrcMdIndex | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.2 | Unsigned32 | read-write | The value of tmnxOamPmCfgSessEthSrcMdIndex specifies the source Ethernet Maintenance Domain (MD) index to be used by the specified session. Zero indicates a value has not been configured. |
| U32 tmnxOamPmCfgSessEthSrcMaIndex | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.3 | Unsigned32 | read-write | The value of tmnxOamPmCfgSessEthSrcMaIndex specifies the source Ethernet Maintenance Association (MA) index to be used by the specified session. Zero indicates a value has not been configured. |
| U32 tmnxOamPmCfgSessEthPriority | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.4 | Unsigned32 | read-write | The value of tmnxOamPmCfgSessEthPriority specifies the value to be copied into the priority field when launching a test PDU for the specified session. |
| MAC tmnxOamPmCfgSessEthDestMacAddr | 1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.5 | MacAddress | read-write | The value of tmnxOamPmCfgSessEthDestMacAddr specifies the destination MAC address for the specified session. The all-zeros MAC address indicates a value has not been configured. |
| tmnxOamPmCfgDelayDmmTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5 | not-accessible | tmnxOamPmCfgDelayDmmTable contains the configuration information for OAM Performance Monitoring Delay Measurement Message (DMM) tests. | |
| tmnxOamPmCfgDelayDmmEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1 | not-accessible | tmnxOamPmCfgDelayDmmEntry contains the configuration information for one OAM Performance Monitoring Delay Measurement Message (DMM) test. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgDelayDmmRowStatus. An attempt to change any value in a row (except tmnxOamPmCfgDelayDmmAdminStatus and tmnxOamPmCfgDelayDmmOnDmndStatus) will be rejected if tmnxOamPmCfgDelayDmmAdminStatus is 'enabled(1)'. | |
| ROW tmnxOamPmCfgDelayDmmRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.1 | RowStatus | read-create | The value of tmnxOamPmCfgDelayDmmRowStatus specifies the status of the configuration row for the specified session's DMM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily other than 'ethernet(1)' will be rejected. |
| TMN tmnxOamPmCfgDelayDmmAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.2 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgDelayDmmAdminStatus specifies whether or not the specified session's DMM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tmnxOamPmCfgDelayDmmAdminStatus to 'enabled(1)'/'disabled(2)' starts/stops the test. If the session type is 'onDemand(2)', see the DESCRIPTION clause for tmnxOamPmCfgDelayDmmOnDmndStatus for information on starting/stopping the test. An attempt to set this object to 'enabled(1)' will be rejected if the tmnxOamPmCfgSessEthTable row for the specified session has incomplete endpoint information for the test (e.g. if tmnxOamPmCfgSessEthDestMacAddr is the all-zeroes MAC address). |
| TMN tmnxOamPmCfgDelayDmmOnDmndStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.3 | TmnxEnabledDisabledOrNA | read-create | The value of tmnxOamPmCfgDelayDmmOnDmndStatus specifies the status of the on-demand DMM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand DMM test. The test will start if tmnxOamPmCfgDelayDmmAdminStatus is 'enabled(1)'. 'disabled(2)' Set by an SNMP manager to stop an on-demand DMM test. Set by SROS to indicate an on-demand DMM test has stopped running because the configured period for the test (i.e. tmnxOamPmCfgDelayDmmTestDuration) has ended. Set by SROS for an on-demand DMM test when tmnxOamPmCfgDelayDmmAdminStatus is set to 'disabled(2)'. 'notApplicable(3)' This code point is the only acceptable value for a proactive DMM test. An attempt to set this code point for an on-demand DMM test will be rejected. The default value is 'disabled(2)' for an on-demand DMM test, and 'notApplicable(3)' for a proactive DMM test. |
| U32 tmnxOamPmCfgDelayDmmTestId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.4 | Unsigned32 | read-create | The value of tmnxOamPmCfgDelayDmmTestId specifies the test identifier for the specified session's DMM test. When a DMM test is created, tmnxOamPmCfgDelayDmmRowStatus and tmnxOamPmCfgDelayDmmTestId must be specified in the same SNMP Set PDU. When a Y.1731 DMM PDU is being built, the test identifier is copied into the PDU's Test ID TLV. An attempt to add a duplicate test identifier to this table will be rejected. Test identifier values larger than 2147483647 are reserved for internal use. |
| U32 tmnxOamPmCfgDelayDmmInterval | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.5 | Unsigned32 | read-create | The value of tmnxOamPmCfgDelayDmmInterval specifies the elapsed time between transmission of Y.1731 DMM PDUs for the specified session's DMM test. |
| U32 tmnxOamPmCfgDelayDmmDataTlvSize | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.6 | Unsigned32 | read-create | The value of tmnxOamPmCfgDelayDmmDataTlvSize specifies the amount of padding to be added to each launched Y.1731 DMM PDU for the specified session's DMM test. Zero specifies that a Data TLV should not be added to each launched Y.1731 DMM PDU. A value larger than zero specifies the total size (including the header) of the Data TLV added to each launched Y.1731 DMM PDU. |
| U32 tmnxOamPmCfgDelayDmmTestDuration | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.7 | Unsigned32 | read-create | The value of tmnxOamPmCfgDelayDmmTestDuration specifies the test duration for the specified session's DMM test. Zero specifies a test which runs until it is manually stopped. An attempt to set a non-zero value will be rejected if tmnxOamPmCfgSessType is 'proactive(1)'. |
| U32 tmnxOamPmCfgDelayDmmRunTimeLeft | 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.8 | Unsigned32 | read-only | The value of tmnxOamPmCfgDelayDmmRunTimeLeft indicates the run time remaining for the specified session's DMM test. For example, suppose a DMM test has the following configuration: tmnxOamPmCfgSessType tmnxOamPmCfgDelayDmmTestDuration -------------------- -------------------------------- 'onDemand(2)' 1000 (seconds) Then, when the DMM test is started (see tmnxOamPmCfgDelayDmmOnDmndStatus), tmnxOamPmCfgDelayDmmRunTimeLeft is initialized to 1000 seconds. After a minute, tmnxOamPmCfgDelayDmmRunTimeLeft is 940 seconds. If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned (because a proactive test runs until it is manually stopped). If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see tmnxOamPmCfgDelayDmmOnDmndStatus), zero is returned (because the test is not running). |
| tmnxOamPmCfgLossSlmTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6 | not-accessible | tmnxOamPmCfgLossSlmTable contains the configuration information for OAM Performance Monitoring Synthetic Loss Message (SLM) tests. | |
| tmnxOamPmCfgLossSlmEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1 | not-accessible | tmnxOamPmCfgLossSlmEntry contains the configuration information for one OAM Performance Monitoring Synthetic Loss Message (SLM) test. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgLossSlmRowStatus. An attempt to change any value in a row (except tmnxOamPmCfgLossSlmAdminStatus and tmnxOamPmCfgLossSlmOnDmndStatus) will be rejected if tmnxOamPmCfgLossSlmAdminStatus is 'enabled(1)'. The following objects must all be set together in one SNMP Set PDU: tmnxOamPmCfgLossSlmChliThreshold, tmnxOamPmCfgLossSlmConsecDeltaTs, tmnxOamPmCfgLossSlmInterval, and tmnxOamPmCfgLossSlmTxFrmsPerDelT. | |
| ROW tmnxOamPmCfgLossSlmRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.1 | RowStatus | read-create | The value of tmnxOamPmCfgLossSlmRowStatus specifies the status of the configuration row for the specified session's SLM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily other than 'ethernet(1)' will be rejected. |
| TMN tmnxOamPmCfgLossSlmAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.2 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgLossSlmAdminStatus specifies whether or not the specified session's SLM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tmnxOamPmCfgLossSlmAdminStatus to 'enabled(1)'/'disabled(2)' starts/stops the test. If the session type is 'onDemand(2)', see the DESCRIPTION clause for tmnxOamPmCfgLossSlmOnDmndStatus for information on starting/stopping the test. An attempt to set this object to 'enabled(1)' will be rejected if the tmnxOamPmCfgSessEthTable row for the specified session has incomplete endpoint information for the test (e.g. if tmnxOamPmCfgSessEthDestMacAddr is the all-zeroes MAC address). |
| TMN tmnxOamPmCfgLossSlmOnDmndStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.3 | TmnxEnabledDisabledOrNA | read-create | The value of tmnxOamPmCfgLossSlmOnDmndStatus specifies the status of the on-demand SLM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand SLM test. The test will start if tmnxOamPmCfgLossSlmAdminStatus is 'enabled(1)'. 'disabled(2)' Set by an SNMP manager to stop an on-demand SLM test. Set by SROS to indicate an on-demand SLM test has stopped running because the configured period for the test (i.e. tmnxOamPmCfgLossSlmTestDuration) has ended. Set by SROS for an on-demand SLM test when tmnxOamPmCfgLossSlmAdminStatus is set to 'disabled(2)'. 'notApplicable(3)' This code point is the only acceptable value for a proactive SLM test. An attempt to set this code point for an on-demand SLM test will be rejected. The default value is 'disabled(2)' for an on-demand SLM test, and 'notApplicable(3)' for a proactive SLM test. |
| U32 tmnxOamPmCfgLossSlmTestId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.4 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmTestId specifies the test identifier for the specified session's SLM test. When an SLM test is created, tmnxOamPmCfgLossSlmRowStatus and tmnxOamPmCfgLossSlmTestId must be specified in the same SNMP Set PDU. When a Y.1731 SLM PDU is being built, the test identifier is copied into the PDU's Test ID field. An attempt to add a duplicate test identifier to this table will be rejected. Test identifier values larger than 2147483647 are reserved for internal use. |
| U32 tmnxOamPmCfgLossSlmInterval | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.5 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmInterval specifies the elapsed time between transmission of Y.1731 SLM PDUs for the specified session's SLM test. |
| U32 tmnxOamPmCfgLossSlmDataTlvSize | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.6 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmDataTlvSize specifies the amount of padding to be added to each launched Y.1731 SLM PDU for the specified session's SLM test. Zero specifies that a Data TLV should not be added to each launched Y.1731 SLM PDU. A value larger than zero specifies the total size (including the header) of the Data TLV added to each launched Y.1731 SLM PDU. |
| U32 tmnxOamPmCfgLossSlmTxFrmsPerDelT | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.7 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmTxFrmsPerDelT specifies the number of Y.1731 SLM frames to send in one MEF-35 'delta_t' (also known as 'Small Time Interval') for the specified session's SLM test. Expressed in milliseconds, delta_t = tmnxOamPmCfgLossSlmTxFrmsPerDelT * tmnxOamPmCfgLossSlmInterval. |
| U32 tmnxOamPmCfgLossSlmConsecDeltaTs | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.8 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmConsecDeltaTs specifies the number of consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals') which constitute a MEF-35 'Availability Window' for the specified session's SLM test. The duration of an Availability Window (in milliseconds) is tmnxOamPmCfgLossSlmTxFrmsPerDelT * tmnxOamPmCfgLossSlmInterval * tmnxOamPmCfgLossSlmConsecDeltaTs. An attempt to change the duration of an Availability Window to more than 10,000 milliseconds will be rejected. An attempt to change tmnxOamPmCfgLossSlmConsecDeltaTs to a value less than or equal to tmnxOamPmCfgLossSlmChliThreshold will be rejected. |
| U32 tmnxOamPmCfgLossSlmChliThreshold | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.9 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmChliThreshold specifies the MEF-35 Consecutive High Loss Interval (CHLI) threshold for the specified session's SLM test. An attempt to change tmnxOamPmCfgLossSlmChliThreshold to a value greater than or equal to tmnxOamPmCfgLossSlmConsecDeltaTs will be rejected. |
| U32 tmnxOamPmCfgLossSlmFlrThreshold | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.10 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmFlrThreshold specifies the MEF-35 Frame Loss Ratio (FLR) threshold for the specified session's SLM test. The FLR threshold is used to decide if a MEF-35 Small Time Interval (also known as delta_t) is Available or Unavailable. |
| U32 tmnxOamPmCfgLossSlmTestDuration | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.11 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossSlmTestDuration specifies the test duration for the specified session's SLM test. Zero specifies a test which runs until it is manually stopped. An attempt to set a non-zero value will be rejected if tmnxOamPmCfgSessType is 'proactive(1)'. |
| U32 tmnxOamPmCfgLossSlmRunTimeLeft | 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12 | Unsigned32 | read-only | The value of tmnxOamPmCfgLossSlmRunTimeLeft indicates the run time remaining for the specified session's SLM test. For example, suppose an SLM test has the following configuration: tmnxOamPmCfgSessType tmnxOamPmCfgLossSlmTestDuration -------------------- -------------------------------- 'onDemand(2)' 1000 (seconds) Then, when the SLM test is started (see tmnxOamPmCfgLossSlmOnDmndStatus), tmnxOamPmCfgLossSlmRunTimeLeft is initialized to 1000 seconds. After a minute, tmnxOamPmCfgLossSlmRunTimeLeft is 940 seconds. If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned (because a proactive test runs until it is manually stopped). If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see tmnxOamPmCfgLossSlmOnDmndStatus), zero is returned (because the test is not running). |
| tmnxOamPmCfgMeasIntvlTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7 | not-accessible | tmnxOamPmCfgMeasIntvlTable contains the configuration information for OAM Performance Monitoring measurement intervals. | |
| tmnxOamPmCfgMeasIntvlEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1 | not-accessible | tmnxOamPmCfgMeasIntvlEntry contains the configuration information for the OAM Performance Monitoring measurement interval associated with the specified session and measurement interval duration. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgMeasIntvlRowStatus. | |
| NUM tmnxOamPmCfgMeasIntvlDuration | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.1 | TmnxOamPmCfgMeasIntervalDuration | not-accessible | The value of tmnxOamPmCfgMeasIntvlDuration specifies the duration of the measurement interval (e.g. 'mi15Minutes(2)') to be read or configured. |
| ROW tmnxOamPmCfgMeasIntvlRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.2 | RowStatus | read-create | The value of tmnxOamPmCfgMeasIntvlRowStatus specifies the status of the configuration row for the specified session and measurement interval duration. |
| U32 tmnxOamPmCfgMeasIntvlAccntPolicy | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.3 | Unsigned32 | read-create | The value of tmnxOamPmCfgMeasIntvlAccntPolicy specifies the accounting policy for the specified session and measurement interval duration. Zero specifies that the specified session and measurement interval duration has no associated accounting policy. |
| U32 tmnxOamPmCfgMeasIntvlsStored | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.4 | Unsigned32 | read-create | The value of tmnxOamPmCfgMeasIntvlsStored specifies the maximum number of historical measurement intervals which can be read using SNMP Get operations. For example, suppose tmnxOamPmCfgMeasIntvlsStored is 32 in the row indexed by {'mySess1', 'mi15Minutes(2)'}. Suppose 'mySess1' has a DMM test which has been running for at least 8 hours (i.e. 15 minutes/interval * 32 intervals). Then, the number of SNMP accessible 15 minute intervals for the test is shown in the following table. Test State Number of SNMP Accessible 15 Minute Intervals ---------- ----------------------------------------------------------- running 33 (i.e. 32 historical intervals, and the current interval) stopped 32 (i.e. 32 historical intervals) At the moment when a test is stopped, the current interval becomes the newest historical interval. If that makes the total number of historical intervals larger than tmnxOamPmCfgMeasIntvlsStored, the oldest historical interval is made SNMP inaccessible. In a typical configuration, older statistics are recorded in a local file (see tmnxOamPmCfgMeasIntvlAccntPolicy). Statistics in the file are not SNMP accessible. The range and default of tmnxOamPmCfgMeasIntvlsStored varies with the row's measurement interval duration index value, as follows. tmnxOamPmCfgMeasIntvlDuration Intvls Stored Range Intvls Stored Default ----------------------------- ------------------- --------------------- 'mi5Minutes(5)' 1..96 32 'mi15Minutes(2)' 1..96 32 'mi1Hour(3)' 1..24 8 'mi1Day(4)' 1..1 1 The following limit is enforced per session (where 'S' is the session name): tmnxOamPmCfgMeasIntvlsStored.S.mi5Minutes(5) + tmnxOamPmCfgMeasIntvlsStored.S.mi15Minutes(2) <= 96. |
| INT tmnxOamPmCfgMeasIntvlBoundaryTyp | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.5 | INTEGER | read-create | The value of tmnxOamPmCfgMeasIntvlBoundaryTyp specifies whether or not the start of each measurement interval is aligned to the wall clock. Values: clockAligned(1) For example, if the specified tmnxOamPmCfgMeasIntvlDuration is 'mi1Day(4)', the first measurement interval for the test will start at midnight (UTC). See the DESCRIPTION clause for tmnxOamPmCfgMeasIntvlClockOffset for additional information. testRelative(2) The first measurement interval for the test will start when the test starts. |
| U32 tmnxOamPmCfgMeasIntvlClockOffset | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.6 | Unsigned32 | read-create | The value of tmnxOamPmCfgMeasIntvlClockOffset specifies the offset (in seconds) for the start of a measurement interval. For example, the following set of values will result in each one day measurement interval for the specified session starting 6 seconds after midnight (UTC). Object Value -------------------------------- ----------------- tmnxOamPmCfgMeasIntvlDuration 'mi1Day(4)' tmnxOamPmCfgMeasIntvlBoundaryTyp 'clockAligned(1)' tmnxOamPmCfgMeasIntvlClockOffset 6 This value must be less than tmnxOamPmCfgMeasIntvlDuration (expressed in seconds). For example, if tmnxOamPmCfgMeasIntvlDuration is 'mi15Minutes(2)' (i.e. 900 seconds), this value must be in the range 0..899. An attempt to set this object to a non-zero value when tmnxOamPmCfgMeasIntvlBoundaryTyp is 'testRelative(2)' will be rejected. |
| TMN tmnxOamPmCfgMeasIntvlDelayTCAs | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.7 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgMeasIntvlDelayTCAs specifies the administrative state of delay Threshold Crossing Alerts (TCAs) for this measurement interval. Delay TCAs are administratively enabled if both tmnxOamPmCfgMeasIntvlDelayTCAs and tmnxOamPmCfgMeasIntvlTCAs are 'enabled(1)'. Delay TCAs are configured using tmnxOamPmCfgThrDelayTable. |
| TMN tmnxOamPmCfgMeasIntvlLossTCAs | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.8 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgMeasIntvlLossTCAs specifies the administrative state of loss Threshold Crossing Alerts (TCAs) for this measurement interval. Loss TCAs are administratively enabled if both tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs are 'enabled(1)'. Loss TCAs are configured using tmnxOamPmCfgThrLossFwBwTable and tmnxOamPmCfgThrLossFwBwAgTable. |
| TMN tmnxOamPmCfgMeasIntvlTCAs | 1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.9 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgMeasIntvlTCAs specifies the administrative state of Threshold Crossing Alerts (TCAs) for this measurement interval. Delay TCAs are administratively enabled if both tmnxOamPmCfgMeasIntvlDelayTCAs and tmnxOamPmCfgMeasIntvlTCAs are 'enabled(1)'. Loss TCAs are administratively enabled if both tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs are 'enabled(1)'. |
| tmnxOamPmCfgSessIpTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8 | not-accessible | tmnxOamPmCfgSessIpTable contains the IP endpoint configuration for the IP tests belonging to OAM Performance Monitoring sessions. | |
| tmnxOamPmCfgSessIpEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1 | not-accessible | tmnxOamPmCfgSessIpEntry contains the IP endpoint configuration for the IP tests belonging to one OAM Performance Monitoring session. A row is created when a tmnxOamPmCfgSessTable row is created with tmnxOamPmCfgSessTestFamily = 'ip(2)'. A row is destroyed when a tmnxOamPmCfgSessTable row with tmnxOamPmCfgSessTestFamily = 'ip(2)' is destroyed. An attempt to change a value in a row for a particular session will be rejected if an administratively enabled test (e.g. a TWAMP-Light test) exists for the session. | |
| U32 tmnxOamPmCfgSessIpServiceId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.1 | Unsigned32 | read-write | The value of tmnxOamPmCfgSessIpServiceId specifies the virtual router to be used by IP tests belonging to the specified session. Zero specifies the Base virtual router, as defined in TIMETRA-VRTR-MIB::vRtrConfTable. A value larger than zero should be the service identifier of a VPRN service (as configured by setting TIMETRA-SERV-MIB::svcType to 'vprn(4)'). Otherwise, the session's test(s) will fail. |
| IPt tmnxOamPmCfgSessIpSrcAddressType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.2 | InetAddressType | read-write | The value of tmnxOamPmCfgSessIpSrcAddressType specifies the address type of tmnxOamPmCfgSessIpSrcAddress. |
| IP tmnxOamPmCfgSessIpSrcAddress | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.3 | InetAddress | read-write | The value of tmnxOamPmCfgSessIpSrcAddress specifies the source IP address to be used by IP tests belonging to the specified session. tmnxOamPmCfgSessIpSrcAddressType and tmnxOamPmCfgSessIpSrcAddress must be set in one SNMP PDU. |
| IPt tmnxOamPmCfgSessIpDstAddressType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.4 | InetAddressType | read-write | The value of tmnxOamPmCfgSessIpDstAddressType specifies the address type of tmnxOamPmCfgSessIpDstAddress. |
| IP tmnxOamPmCfgSessIpDstAddress | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.5 | InetAddress | read-write | The value of tmnxOamPmCfgSessIpDstAddress specifies the destination IP address to be used by IP tests belonging to the specified session. tmnxOamPmCfgSessIpDstAddressType and tmnxOamPmCfgSessIpDstAddress must be set in one SNMP PDU. |
| INE tmnxOamPmCfgSessIpDstUdpPort | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.6 | InetPortNumber | read-write | The value of tmnxOamPmCfgSessIpDstUdpPort specifies the destination UDP port to be used by IP tests belonging to the specified session. Zero indicates that no destination UDP port has been configured. |
| T/F tmnxOamPmCfgSessIpBypassRouting | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.7 | TruthValue | read-write | The value of tmnxOamPmCfgSessIpBypassRouting specifies whether or not to send the ping request (for an IP test which belongs to the specified session) to a host on a directly attached network, bypassing the routing table. At most one of tmnxOamPmCfgSessIpBypassRouting, tmnxOamPmCfgSessIpEgressIfName, and tmnxOamPmCfgSessIpNhAddress can be set to a non-default value. |
| TNA tmnxOamPmCfgSessIpEgressIfName | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.8 | TNamedItemOrEmpty | read-write | The value of tmnxOamPmCfgSessIpEgressIfName specifies the name of the interface to be used to transmit a ping request (for an IP test which belongs to the specified session). At most one of tmnxOamPmCfgSessIpBypassRouting, tmnxOamPmCfgSessIpEgressIfName, and tmnxOamPmCfgSessIpNhAddress can be set to a non-default value. |
| IPt tmnxOamPmCfgSessIpNhAddressType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.9 | InetAddressType | read-write | The value of tmnxOamPmCfgSessIpNhAddressType specifies the address type of tmnxOamPmCfgSessIpNhAddress. |
| IP tmnxOamPmCfgSessIpNhAddress | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.10 | InetAddress | read-write | The value of tmnxOamPmCfgSessIpNhAddress specifies the next-hop IP address to be used by IP tests belonging to the specified session. tmnxOamPmCfgSessIpNhAddressType and tmnxOamPmCfgSessIpNhAddress must be set in one SNMP PDU. At most one of tmnxOamPmCfgSessIpBypassRouting, tmnxOamPmCfgSessIpEgressIfName, and tmnxOamPmCfgSessIpNhAddress can be set to a non-default value. |
| TFC tmnxOamPmCfgSessIpForwardClass | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.11 | TFCName | read-write | The value of tmnxOamPmCfgSessIpForwardClass specifies the forwarding class name to be used when launching a ping request for an IP test belonging to the specified session. The forwarding class name must be present in the index column of TIMETRA-QOS-MIB::tFCNameTable. |
| TPR tmnxOamPmCfgSessIpProfile | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.12 | TProfile | read-write | The value of tmnxOamPmCfgSessIpProfile specifies the profile to be used when launching a ping request for an IP test belonging to the specified session. |
| U32 tmnxOamPmCfgSessIpTtl | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.13 | Unsigned32 | read-write | The value of tmnxOamPmCfgSessIpTtl specifies the time-to-live to be used when launching a ping request for an IP test belonging to the specified session. |
| INE tmnxOamPmCfgSessIpSrcUdpPort | 1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.14 | InetPortNumber | read-write | The value of tmnxOamPmCfgSessIpSrcUdpPort specifies the source UDP port to be used by IP tests belonging to the specified session. A source UDP port is allocated when the TWAMP-Light test for the specified session has its administrative status (i.e. tmnxOamPmCfgTwampLtAdminStatus) changed to 'enabled(1)'. The port is deallocated when the TWAMP-Light test has its administrative status changed to 'disabled(2)'. When allocating a source UDP port: 1. If tmnxOamPmCfgSessIpSrcUdpPort is zero, the source UDP port is allocated from the dynamic pool of UDP ports. 2. If tmnxOamPmCfgSessIpSrcUdpPort is non-zero, the source UDP port with port number equal to tmnxOamPmCfgSessIpSrcUdpPort is allocated. The read-only object tmnxOamPmStsSessIpSrcUdpPort indicates the allocated UDP port number. |
| tmnxOamPmCfgTwampLtTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9 | not-accessible | tmnxOamPmCfgTwampLtTable contains the configuration information for OAM Performance Monitoring TWAMP-Light (Two-Way Active Measurement Protocol, Light) tests. | |
| tmnxOamPmCfgTwampLtEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1 | not-accessible | tmnxOamPmCfgTwampLtEntry contains the configuration information for the OAM Performance Monitoring TWAMP-Light test for the specified session. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgTwampLtRowStatus. An attempt to change any value in a row (except tmnxOamPmCfgTwampLtAdminStatus and tmnxOamPmCfgTwampLtOnDmndStatus) will be rejected if tmnxOamPmCfgTwampLtAdminStatus is 'enabled(1)'. | |
| ROW tmnxOamPmCfgTwampLtRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.1 | RowStatus | read-create | The value of tmnxOamPmCfgTwampLtRowStatus specifies the status of the configuration row for the specified session's TWAMP-Light test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily other than 'ip(2)' will be rejected. |
| TMN tmnxOamPmCfgTwampLtAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.2 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgTwampLtAdminStatus specifies whether or not the specified session's TWAMP-Light test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tmnxOamPmCfgTwampLtAdminStatus to 'enabled(1)'/'disabled(2)' starts/stops the test. If the session type is 'onDemand(2)', see the DESCRIPTION clause for tmnxOamPmCfgTwampLtOnDmndStatus for information on starting/stopping the test. An attempt to set this object to 'enabled(1)' will be rejected if the tmnxOamPmCfgSessIpTable row for the specified session has incomplete information for the test (e.g. if tmnxOamPmCfgSessIpSrcAddressType is 'unknown(0)'). |
| TMN tmnxOamPmCfgTwampLtOnDmndStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.3 | TmnxEnabledDisabledOrNA | read-create | The value of tmnxOamPmCfgTwampLtOnDmndStatus specifies the status of the on-demand TWAMP-Light test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand TWAMP-Light test. The test will start if tmnxOamPmCfgTwampLtAdminStatus is 'enabled(1)'. 'disabled(2)' Set by an SNMP manager to stop an on-demand TWAMP-Light test. Set by SROS to indicate an on-demand TWAMP-Light test has stopped running because the configured period for the test (i.e. tmnxOamPmCfgTwampLtTestDuration) has ended. Set by SROS for an on-demand TWAMP-Light test when tmnxOamPmCfgTwampLtAdminStatus is set to 'disabled(2)'. 'notApplicable(3)' This code point is the only acceptable value for a proactive TWAMP-Light test. An attempt to set this code point for an on-demand TWAMP-Light test will be rejected. The default value is 'disabled(2)' for an on-demand TWAMP-Light test, and 'notApplicable(3)' for a proactive TWAMP-Light test. |
| U32 tmnxOamPmCfgTwampLtTestId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.4 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtTestId specifies the test identifier for the specified session's TWAMP-Light test. When a TWAMP-Light test is created, tmnxOamPmCfgTwampLtRowStatus and tmnxOamPmCfgTwampLtTestId must be specified in the same SNMP Set PDU. An attempt to add a duplicate test identifier to this table will be rejected. Test identifier values larger than 2147483647 are reserved for internal use. |
| U32 tmnxOamPmCfgTwampLtInterval | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.5 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtInterval specifies the elapsed time between transmission of TWAMP-Test PDUs for the specified session's TWAMP-Light test. |
| U32 tmnxOamPmCfgTwampLtPadSize | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.6 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtPadSize specifies the amount of padding to be added to each launched TWAMP-Test PDU for the specified session's TWAMP-Light test. |
| U32 tmnxOamPmCfgTwampLtTestDuration | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.7 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtTestDuration specifies the test duration for the specified session's TWAMP-Light test. Zero specifies a test which runs until it is manually stopped. An attempt to set a non-zero value will be rejected if tmnxOamPmCfgSessType is 'proactive(1)'. |
| U32 tmnxOamPmCfgTwampLtRunTimeLeft | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.8 | Unsigned32 | read-only | The value of tmnxOamPmCfgTwampLtRunTimeLeft indicates the run time remaining for the specified session's TWAMP-Light test. For example, suppose a TWAMP-Light test has the following configuration: tmnxOamPmCfgSessType tmnxOamPmCfgTwampLtTestDuration -------------------- ------------------------------- 'onDemand(2)' 1000 (seconds) Then, when the TWAMP-Light test is started (see tmnxOamPmCfgTwampLtOnDmndStatus), tmnxOamPmCfgTwampLtRunTimeLeft is initialized to 1000 seconds. After a minute, tmnxOamPmCfgTwampLtRunTimeLeft is 940 seconds. If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned (because a proactive test runs until it is manually stopped). If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see tmnxOamPmCfgTwampLtOnDmndStatus), zero is returned (because the test is not running). |
| INT tmnxOamPmCfgTwampLtCollectStats | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.9 | INTEGER | read-create | The value of tmnxOamPmCfgTwampLtCollectStats specifies the type(s) of statistics to collect while the TWAMP-Light test is running. Code points: collectDelayStats(1) - collect TWAMP-Light delay statistics (readable using tmnxOamPmStsDelayTwlTable and tmnxOamPmStsDelayTwlBinTable) collectLossStats(2) - collect TWAMP-Light loss statistics (readable using tmnxOamPmStsLossTwlTable) collectDelayAndLossStats(3) - collectDelayStats(1) and collectLossStats(2), simultaneously |
| U32 tmnxOamPmCfgTwampLtTxFrmsPerDelT | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.10 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtTxFrmsPerDelT specifies the number of TWAMP-Light frames to send in one MEF-35 'delta_t' (also known as 'Small Time Interval') when computing loss statistics for the specified session's TWAMP-Light test. The loss parameters used by SROS for TWAMP-Light tests (e.g. tmnxOamPmCfgTwampLtTxFrmsPerDelT) are modelled after the MEF-35 loss parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. Expressed in milliseconds, delta_t = tmnxOamPmCfgTwampLtTxFrmsPerDelT * tmnxOamPmCfgTwampLtInterval. |
| U32 tmnxOamPmCfgTwampLtConsecDeltaTs | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.11 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtConsecDeltaTs specifies the number of consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals') which constitute a MEF-35 'Availability Window' when computing loss statistics for the specified session's TWAMP-Light test. The loss parameters used by SROS for TWAMP-Light tests (e.g. tmnxOamPmCfgTwampLtConsecDeltaTs) are modelled after the MEF-35 loss parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. The duration of an Availability Window (in milliseconds) is tmnxOamPmCfgTwampLtTxFrmsPerDelT * tmnxOamPmCfgTwampLtInterval * tmnxOamPmCfgTwampLtConsecDeltaTs. An attempt to change the duration of an Availability Window to more than 100,000 milliseconds will be rejected. An attempt to change tmnxOamPmCfgTwampLtConsecDeltaTs to a value less than or equal to tmnxOamPmCfgTwampLtChliThreshold will be rejected. |
| U32 tmnxOamPmCfgTwampLtChliThreshold | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.12 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtChliThreshold specifies the MEF-35 Consecutive High Loss Interval (CHLI) threshold for the specified session's TWAMP-Light test. The loss parameters used by SROS for TWAMP-Light tests (e.g. tmnxOamPmCfgTwampLtChliThreshold) are modelled after the MEF-35 loss parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. An attempt to change tmnxOamPmCfgTwampLtChliThreshold to a value greater than or equal to tmnxOamPmCfgTwampLtConsecDeltaTs will be rejected. |
| U32 tmnxOamPmCfgTwampLtFlrThreshold | 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.13 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwampLtFlrThreshold specifies the MEF-35 Frame Loss Ratio (FLR) threshold for the specified session's TWAMP-Light test. The FLR threshold is used to decide if a MEF-35 Small Time Interval (also known as delta_t) is Available or Unavailable. The loss parameters used by SROS for TWAMP-Light tests (e.g. tmnxOamPmCfgTwampLtFlrThreshold) are modelled after the MEF-35 loss parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. |
| tmnxOamPmCfgTwlRflTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.10 | not-accessible | tmnxOamPmCfgTwlRflTable contains the configuration information for OAM Performance Monitoring TWAMP-Light (Two-Way Active Measurement Protocol, Light) reflectors. A TWAMP-Light reflector responds to TWAMP-Test frames. | |
| tmnxOamPmCfgTwlRflEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1 | not-accessible | tmnxOamPmCfgTwlRflEntry contains the configuration information for the OAM Performance Monitoring TWAMP-Light reflector for the virtual router specified by the given service identifier. Service identifier zero specifies the Base virtual router (i.e. the virtual router with TIMETRA-VRTR-MIB::vRtrName = 'Base'). A service identifier larger than zero must be the service identifier of a VPRN service (i.e. a service with TIMETRA-SERV-MIB::svcType = 'vprn(4)'). Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgTwlRflRowStatus. A row indexed by a VPRN service identifier is destroyed when the VPRN service is destroyed. | |
| ROW tmnxOamPmCfgTwlRflRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.1 | RowStatus | read-create | The value of tmnxOamPmCfgTwlRflRowStatus specifies the status of the configuration row for the TWAMP-Light reflector for the virtual router specified by the given service identifier. When a reflector is created, tmnxOamPmCfgTwlRflRowStatus and tmnxOamPmCfgTwlRflListenUdpPort must be specified in the same SNMP Set PDU. |
| TMN tmnxOamPmCfgTwlRflAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.2 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgTwlRflAdminStatus specifies whether or not the specified TWAMP-Light reflector is administratively enabled. tmnxOamPmCfgTwlRflListenUdpPort cannot be changed while tmnxOamPmCfgTwlRflAdminStatus is 'enabled(1)'. |
| TIT tmnxOamPmCfgTwlRflDescription | 1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.3 | TItemDescription | read-create | The value of tmnxOamPmCfgTwlRflDescription specifies the descriptive text for the specified TWAMP-Light reflector. |
| U32 tmnxOamPmCfgTwlRflListenUdpPort | 1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.4 | Unsigned32 | read-create | The value of tmnxOamPmCfgTwlRflListenUdpPort specifies the UDP port on which the specified TWAMP-Light reflector listens for TWAMP PDUs. When a reflector is created, tmnxOamPmCfgTwlRflRowStatus and tmnxOamPmCfgTwlRflListenUdpPort must be specified in the same SNMP Set PDU. tmnxOamPmCfgTwlRflListenUdpPort cannot be changed while tmnxOamPmCfgTwlRflAdminStatus is 'enabled(1)'. The valid range is (64364..64373). For backwards compatibility reasons, the range has not been restricted in the MIB definition. |
| tmnxOamPmCfgTwlRflPfxTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11 | not-accessible | tmnxOamPmCfgTwlRflPfxTable contains the configuration information for OAM Performance Monitoring TWAMP-Light (Two-Way Active Measurement Protocol, Light) reflector prefixes. The set of prefixes configured for a TWAMP-Light reflector defines a set of valid source addresses for the reflector. When the reflector is validating an incoming TWAMP-Test PDU, the PDU is rejected (and counted) if its source address is invalid. | |
| tmnxOamPmCfgTwlRflPfxEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1 | not-accessible | tmnxOamPmCfgTwlRflPfxEntry contains the configuration information for the OAM Performance Monitoring TWAMP-Light reflector prefix specified by the indices. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgTwlRflPfxRowStatus. Rows are destroyed when the corresponding tmnxOamPmCfgTwlRflTable row is destroyed. | |
| IPt tmnxOamPmCfgTwlRflPfxPrefixType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.1 | InetAddressType | not-accessible | The value of tmnxOamPmCfgTwlRflPfxPrefixType specifies the prefix type of tmnxOamPmCfgTwlRflPfxPrefix. |
| IP tmnxOamPmCfgTwlRflPfxPrefix | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.2 | InetAddress | not-accessible | The value of tmnxOamPmCfgTwlRflPfxPrefix (in combination with tmnxOamPmCfgTwlRflPfxPrefixType and tmnxOamPmCfgTwlRflPfxPrefixLen) specifies a valid source prefix for the TWAMP-Light reflector specified by the given service identifier. A TWAMP-Test PDU with an invalid source address (i.e. a source address which matches none of the prefixes configured against the reflector) will be counted and dropped by the reflector. Therefore, if no prefixes are configured against a reflector, the reflector will drop and count all incoming PDUs. Configuring the prefix 0.0.0.0/0 instructs the reflector to accept the source address in each incoming IPv4 TWAMP-Test PDU. Configuring the prefix 0::0/0 instructs the reflector to accept the source address in each incoming IPv6 TWAMP-Test PDU. |
| ADR tmnxOamPmCfgTwlRflPfxPrefixLen | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.3 | InetAddressPrefixLength | not-accessible | The value of tmnxOamPmCfgTwlRflPfxPrefixLen (in combination with tmnxOamPmCfgTwlRflPfxPrefixType and tmnxOamPmCfgTwlRflPfxPrefix) specifies a valid source prefix for the TWAMP-Light reflector specified by the given service identifier. |
| ROW tmnxOamPmCfgTwlRflPfxRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.4 | RowStatus | read-create | The value of tmnxOamPmCfgTwlRflPfxRowStatus specifies the status of the configuration row for the specified TWAMP-Light reflector prefix. An attempt to create a row will be rejected if there is no row with the same svcId in tmnxOamPmCfgTwlRflTable. |
| TIT tmnxOamPmCfgTwlRflPfxDescription | 1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.5 | TItemDescription | read-create | The value of tmnxOamPmCfgTwlRflPfxDescription specifies the descriptive text for the specified TWAMP-Light reflector prefix. |
| tmnxOamPmCfgLossLmmTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12 | not-accessible | tmnxOamPmCfgLossLmmTable contains the configuration information for OAM Performance Monitoring Loss Measurement Message (LMM) tests. | |
| tmnxOamPmCfgLossLmmEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1 | not-accessible | tmnxOamPmCfgLossLmmEntry contains the configuration information for one OAM Performance Monitoring Loss Measurement Message (LMM) test. Rows are created or destroyed by SNMP Set operations on tmnxOamPmCfgLossLmmRowStatus. An attempt to change any value in a row (except tmnxOamPmCfgLossLmmAdminStatus and tmnxOamPmCfgLossLmmOnDmndStatus) will be rejected if tmnxOamPmCfgLossLmmAdminStatus is 'enabled(1)'. The following objects must all be set together in one SNMP Set PDU: tmnxOamPmCfgLossLmmChliThreshold, tmnxOamPmCfgLossLmmConsecDeltaTs, and tmnxOamPmCfgLossLmmTxFrmsPerDelT. | |
| ROW tmnxOamPmCfgLossLmmRowStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.1 | RowStatus | read-create | The value of tmnxOamPmCfgLossLmmRowStatus specifies the status of the configuration row for the specified session's LMM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily other than 'ethernet(1)' will be rejected. |
| TMN tmnxOamPmCfgLossLmmAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.2 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgLossLmmAdminStatus specifies whether or not the specified session's LMM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tmnxOamPmCfgLossLmmAdminStatus to 'enabled(1)'/'disabled(2)' starts/stops the test. If the session type is 'onDemand(2)', see the DESCRIPTION clause for tmnxOamPmCfgLossLmmOnDmndStatus for information on starting/stopping the test. An attempt to set this object to 'enabled(1)' will be rejected if the tmnxOamPmCfgSessEthTable row for the specified session has incomplete endpoint information for the test (e.g. if tmnxOamPmCfgSessEthDestMacAddr is the all-zeroes MAC address). |
| TMN tmnxOamPmCfgLossLmmOnDmndStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.3 | TmnxEnabledDisabledOrNA | read-create | The value of tmnxOamPmCfgLossLmmOnDmndStatus specifies the status of the on-demand LMM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand LMM test. The test will start if tmnxOamPmCfgLossLmmAdminStatus is 'enabled(1)'. 'disabled(2)' Set by an SNMP manager to stop an on-demand LMM test. Set by SROS to indicate an on-demand LMM test has stopped running because the configured period for the test (i.e. tmnxOamPmCfgLossLmmTestDuration) has ended. Set by SROS for an on-demand LMM test when tmnxOamPmCfgLossLmmAdminStatus is set to 'disabled(2)'. 'notApplicable(3)' This code point is the only acceptable value for a proactive LMM test. An attempt to set this code point for an on-demand LMM test will be rejected. The default value is 'disabled(2)' for an on-demand LMM test, and 'notApplicable(3)' for a proactive LMM test. |
| U32 tmnxOamPmCfgLossLmmTestId | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.4 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmTestId specifies the test identifier for the specified session's LMM test. When an LMM test is created, tmnxOamPmCfgLossLmmRowStatus and tmnxOamPmCfgLossLmmTestId must be specified in the same SNMP Set PDU. An attempt to add a duplicate test identifier to this table will be rejected. Test identifier values larger than 2147483647 are reserved for internal use. |
| U32 tmnxOamPmCfgLossLmmInterval | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.5 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmInterval specifies the elapsed time between transmission of Y.1731 LMM PDUs for the specified session's LMM test. |
| U32 tmnxOamPmCfgLossLmmTestDuration | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.6 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmTestDuration specifies the test duration for the specified session's LMM test. Zero specifies a test which runs until it is manually stopped. An attempt to set a non-zero value will be rejected if tmnxOamPmCfgSessType is 'proactive(1)'. |
| U32 tmnxOamPmCfgLossLmmRunTimeLeft | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.7 | Unsigned32 | read-only | The value of tmnxOamPmCfgLossLmmRunTimeLeft indicates the run time remaining for the specified session's LMM test. For example, suppose an LMM test has the following configuration: tmnxOamPmCfgSessType tmnxOamPmCfgLossLmmTestDuration -------------------- -------------------------------- 'onDemand(2)' 1000 (seconds) Then, when the LMM test is started (see tmnxOamPmCfgLossLmmOnDmndStatus), tmnxOamPmCfgLossLmmRunTimeLeft is initialized to 1000 seconds. After a minute, tmnxOamPmCfgLossLmmRunTimeLeft is 940 seconds. If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned (because a proactive test runs until it is manually stopped). If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see tmnxOamPmCfgLossLmmOnDmndStatus), zero is returned (because the test is not running). |
| U32 tmnxOamPmCfgLossLmmTxFrmsPerDelT | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.8 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmTxFrmsPerDelT specifies the number of LMM frames to send in one MEF-35 'delta_t' (also known as 'Small Time Interval') when computing availability statistics for the specified session's LMM test. The availability parameters used by SROS for LMM tests (e.g. tmnxOamPmCfgLossLmmTxFrmsPerDelT) are modelled after the MEF-35 availability parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. Expressed in milliseconds, delta_t = tmnxOamPmCfgLossLmmTxFrmsPerDelT * tmnxOamPmCfgLossLmmInterval. |
| U32 tmnxOamPmCfgLossLmmConsecDeltaTs | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.9 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmConsecDeltaTs specifies the number of consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals') which constitute a MEF-35 'Availability Window' when computing availability statistics for the specified session's LMM test. The availability parameters used by SROS for LMM tests (e.g. tmnxOamPmCfgLossLmmConsecDeltaTs) are modelled after the MEF-35 availability parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. The duration of an Availability Window (in milliseconds) is tmnxOamPmCfgLossLmmTxFrmsPerDelT * tmnxOamPmCfgLossLmmInterval * tmnxOamPmCfgLossLmmConsecDeltaTs. An attempt to change the duration of an Availability Window to more than 100,000 milliseconds will be rejected. An attempt to change tmnxOamPmCfgLossLmmConsecDeltaTs to a value less than or equal to tmnxOamPmCfgLossLmmChliThreshold will be rejected. |
| U32 tmnxOamPmCfgLossLmmChliThreshold | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.10 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmChliThreshold specifies the MEF-35 Consecutive High Loss Interval (CHLI) threshold for the specified session's LMM test. The availability parameters used by SROS for LMM tests (e.g. tmnxOamPmCfgLossLmmChliThreshold) are modelled after the MEF-35 availability parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. An attempt to change tmnxOamPmCfgLossLmmChliThreshold to a value greater than or equal to tmnxOamPmCfgLossLmmConsecDeltaTs will be rejected. |
| U32 tmnxOamPmCfgLossLmmFlrThreshold | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.11 | Unsigned32 | read-create | The value of tmnxOamPmCfgLossLmmFlrThreshold specifies the MEF-35 Frame Loss Ratio (FLR) threshold for the specified session's LMM test. The FLR threshold is used to decide if a MEF-35 'delta_t' (also known as 'Small Time Interval') is Available or Unavailable. The availability parameters used by SROS for LMM tests (e.g. tmnxOamPmCfgLossLmmFlrThreshold) are modelled after the MEF-35 availability parameters defined for Synthetic Loss Measurement (SLM) tests. Hence, the REFERENCE text for this object is a MEF-35 SLM section. |
| TMN tmnxOamPmCfgLossLmmAvAdminStatus | 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.12 | TmnxEnabledDisabled | read-create | The value of tmnxOamPmCfgLossLmmAvAdminStatus specifies whether or not collection of availability statistics is enabled for the specified session's LMM test. When the value of tmnxOamPmCfgLossLmmAvAdminStatus is 'disabled(2)', the following configuration objects are ignored: tmnxOamPmCfgLossLmmChliThreshold, tmnxOamPmCfgLossLmmConsecDeltaTs, tmnxOamPmCfgLossLmmFlrThreshold, and tmnxOamPmCfgLossLmmTxFrmsPerDelT. When the value of tmnxOamPmCfgLossLmmAvAdminStatus is 'disabled(2)', the value of each of the following counters is always zero: tmnxOamPmStsLossLmmAvailIndBwd, tmnxOamPmStsLossLmmAvailIndFwd, tmnxOamPmStsLossLmmChliBwd, tmnxOamPmStsLossLmmChliFwd, tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd, tmnxOamPmStsLossLmmUnavlIndBwd, tmnxOamPmStsLossLmmUnavlIndFwd, tmnxOamPmStsLossLmmUndetDelTsBwd, tmnxOamPmStsLossLmmUndetDelTsFwd, tmnxOamPmStsLossLmmUndtAvlBwd, tmnxOamPmStsLossLmmUndtAvlFwd, tmnxOamPmStsLossLmmUndtUnavlBwd, and tmnxOamPmStsLossLmmUndtUnavlFwd. When the counters listed above are stuck at zero, the corresponding TCA raise thresholds (for the specified LMM test) are never met or exceeded. The corresponding TCA raise thresholds are configured using the following objects: tmnxOamPmCfgThrLossChliRaise, tmnxOamPmCfgThrLossHliRaise, tmnxOamPmCfgThrLossUnavlIndRaise, tmnxOamPmCfgThrLossUndtAvlRaise, or tmnxOamPmCfgThrLossUndtUnavlRais. |
| tmnxOamPmCfgThrLossFwBwTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.13 | not-accessible | tmnxOamPmCfgThrLossFwBwTable contains configured thresholds for OAM Performance Monitoring loss TCAs. The subset of the loss thresholds that are only configurable in the forward and backward directions is configured using this table. | |
| tmnxOamPmCfgThrLossFwBwEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1 | not-accessible | tmnxOamPmCfgThrLossFwBwEntry contains the configured thresholds for the forward or backward direction of one OAM-PM loss test. For example, a row may contain the configurable thresholds for the forward direction for the SLM test belonging to OAM-PM session OAM_PM_Eth_session_1. SROS creates/destroys two rows (forward and backward) in this table for each OAM-PM loss test created/destroyed. A manager creates a loss test using: tmnxOamPmCfgLossLmmRowStatus, tmnxOamPmCfgLossSlmRowStatus, or tmnxOamPmCfgTwampLtRowStatus. | |
| TMN tmnxOamPmCfgTestType | 1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.1 | TmnxOamPmTestType | not-accessible | The value of tmnxOamPmCfgTestType specifies the test type index of the row. The test types supporting loss thresholds are 'slm(2)', 'twampLight(3)', and 'lmm(4)'. |
| TMN tmnxOamPmCfgForwardBackward | 1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.2 | TmnxOamPmForwardBackward | not-accessible | The value of tmnxOamPmCfgForwardBackward specifies the direction index of the row. |
| I32 tmnxOamPmCfgThrLossAvgFlrRaise | 1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.3 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossAvgFlrRaise specifies the raise threshold for the average Frame Loss Ratio (FLR). Depending on the specified indices, tmnxOamPmCfgThrLossAvgFlrRaise is the raise threshold for: tmnxOamPmStsLossSlmAvgFlrFwd, tmnxOamPmStsLossSlmAvgFlrBwd, tmnxOamPmStsLossLmmAvgFlrFwd, tmnxOamPmStsLossLmmAvgFlrBwd, tmnxOamPmStsLossTwlAvgFlrFwd, or tmnxOamPmStsLossTwlAvgFlrBwd. For example, suppose: 1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement interval of the OAM-PM session OAM_PM_Eth_session_1 (using tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs). 2. tmnxOamPmCfgThrLossAvgFlrRaise is set to 5000 (i.e. 5.000%) for the indices {OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}. 3. At the end of a 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test, the average FLR (i.e. tmnxOamPmStsLossSlmAvgFlrFwd) is 5000 (i.e. 5.000%) or more. 4. Generating an average FLR Raise TCA is allowed (e.g. the most recent average FLR TCA for the specified indices was a Clear). Then, SROS generates an average FLR Raise TCA (using tmnxOamPmThrRaise) at the end of the 15-minute interval, for the forward direction. Negative one specifies that average FLR thresholding is disabled for the specified indices (i.e. SROS will not generate a Raise TCA, or a Clear TCA). tmnxOamPmCfgThrLossAvgFlrRaise must be greater than tmnxOamPmCfgThrLossAvgFlrClear. Exception: the combination tmnxOamPmCfgThrLossAvgFlrRaise=-1 and tmnxOamPmCfgThrLossAvgFlrClear=-1 is supported. tmnxOamPmCfgThrLossAvgFlrRaise and tmnxOamPmCfgThrLossAvgFlrClear must be set in the same SNMP Set PDU. |
| I32 tmnxOamPmCfgThrLossAvgFlrClear | 1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.4 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossAvgFlrClear specifies the clear threshold for the average Frame Loss Ratio (FLR). Depending on the specified indices, tmnxOamPmCfgThrLossAvgFlrClear is the clear threshold for: tmnxOamPmStsLossSlmAvgFlrFwd, tmnxOamPmStsLossSlmAvgFlrBwd, tmnxOamPmStsLossLmmAvgFlrFwd, tmnxOamPmStsLossLmmAvgFlrBwd, tmnxOamPmStsLossTwlAvgFlrFwd, or tmnxOamPmStsLossTwlAvgFlrBwd. For example, suppose: 1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement interval of the OAM-PM session OAM_PM_Eth_session_1 (using tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs). 2. tmnxOamPmCfgThrLossAvgFlrClear is set to 4000 (i.e. 4.000%) for the indices {OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}. 3. A previous 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test generated an average FLR Raise TCA for the forward direction (see tmnxOamPmCfgThrLossAvgFlrRaise). The TCA has not been cleared. 4. The just-closed 15-minute interval has an average forward FLR for the forward direction (i.e. tmnxOamPmStsLossSlmAvgFlrFwd) of 4000 (i.e. 4.000%), or less. Then, SROS generates an average FLR Clear TCA (using tmnxOamPmThrClear) at the end of the 15-minute interval, for the forward direction. If tmnxOamPmCfgThrLossAvgFlrRaise > 0 AND tmnxOamPmCfgThrLossAvgFlrClear >= 0, average FLR Clear TCAs can be generated for the specified indices. In this case, the maximum number of average FLR TCAs that will be generated for the specified indices across (for example) two 15 minute intervals is two: Raise and Clear. If tmnxOamPmCfgThrLossAvgFlrRaise > 0 AND tmnxOamPmCfgThrLossAvgFlrClear = -1, no average FLR Clear TCAs will be generated for the specified indices. In this case, the maximum number of average FLR TCAs that will be generated for the specified indices across (for example) two 15 minute intervals is two: Raise and Raise. tmnxOamPmCfgThrLossAvgFlrRaise must be greater than tmnxOamPmCfgThrLossAvgFlrClear. Exception: the combination tmnxOamPmCfgThrLossAvgFlrRaise=-1 and tmnxOamPmCfgThrLossAvgFlrClear=-1 is supported. tmnxOamPmCfgThrLossAvgFlrClear and tmnxOamPmCfgThrLossAvgFlrClear must be set in the same SNMP Set PDU. |
| tmnxOamPmCfgThrLossFwBwAgTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14 | not-accessible | tmnxOamPmCfgThrLossFwBwAgTable contains configured thresholds for OAM Performance Monitoring loss TCAs. The subset of the loss thresholds that are configurable in the forward, backward, and aggregate directions is configured using this table. An aggregate loss threshold applies to the sum of a forward loss counter and a backward loss counter. | |
| tmnxOamPmCfgThrLossFwBwAgEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1 | not-accessible | tmnxOamPmCfgThrLossFwBwAgEntry contains the configured thresholds for the forward, backward, or aggregate direction of one OAM-PM loss test. For example, a row may contain the configurable thresholds for the forward direction for the SLM test belonging to OAM-PM session OAM_PM_Eth_session_1. SROS creates/destroys three rows (forward, backward, and aggregate) in this table for each OAM-PM LMM, SLM or TWAMP-Light test created/destroyed. A manager creates an LMM, SLM or TWAMP-Light test using: tmnxOamPmCfgLossLmmRowStatus, tmnxOamPmCfgLossSlmRowStatus, or tmnxOamPmCfgTwampLtRowStatus. | |
| TMN tmnxOamPmCfgForwardBackwardAggr | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.1 | TmnxOamPmForwardBackwardAggr | not-accessible | The value of tmnxOamPmCfgForwardBackwardAggr specifies the direction index of the row. |
| I32 tmnxOamPmCfgThrLossChliRaise | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.2 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossChliRaise specifies the raise threshold for Consecutive High Loss Intervals (CHLIs). Depending on the specified indices, tmnxOamPmCfgThrLossChliRaise is the raise threshold for: tmnxOamPmStsLossLmmChliBwd, tmnxOamPmStsLossLmmChliFwd + tmnxOamPmStsLossLmmChliBwd, tmnxOamPmStsLossLmmChliFwd, tmnxOamPmStsLossSlmChliBwd, tmnxOamPmStsLossSlmChliFwd + tmnxOamPmStsLossSlmChliBwd, tmnxOamPmStsLossSlmChliFwd, tmnxOamPmStsLossTwlChliBwd, tmnxOamPmStsLossTwlChliFwd + tmnxOamPmStsLossTwlChliBwd, or tmnxOamPmStsLossTwlChliFwd. For example, suppose: 1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement interval of the OAM-PM session OAM_PM_Eth_session_1 (using tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs). 2. tmnxOamPmCfgThrLossChliRaise is set to 7 for the indices {OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}. 3. A 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test has its forward CHLI count (i.e. tmnxOamPmStsLossSlmChliFwd) increase to 7. 4. Generating a CHLI Raise TCA is allowed (e.g. the most recent CHLI TCA for the specified indices was a Clear). Then, SROS immediately generates a CHLI Raise TCA (using tmnxOamPmThrRaise) for the 15-minute interval, for the forward direction. Negative one specifies that CHLI thresholding is disabled for the specified indices (i.e. SROS will not generate a Raise TCA, or a Clear TCA). tmnxOamPmCfgThrLossChliRaise must be greater than tmnxOamPmCfgThrLossChliClear. Exception: the combination tmnxOamPmCfgThrLossChliRaise=-1 and tmnxOamPmCfgThrLossChliClear=-1 is supported. tmnxOamPmCfgThrLossChliRaise and tmnxOamPmCfgThrLossChliClear must be set in the same SNMP Set PDU. The upper bound of this object is the maximum number of MEF-35 'delta_t' time intervals (also known as 'Small Time Intervals') which can occur in a 24 hour measurement interval. |
| I32 tmnxOamPmCfgThrLossChliClear | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.3 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossChliClear specifies the clear threshold for Consecutive High Loss Intervals (CHLIs). tmnxOamPmCfgThrLossChliClear is the clear threshold for the list of counters specified in the tmnxOamPmCfgThrLossChliRaise DESCRIPTION clause. For example, suppose: 1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement interval of the OAM-PM session OAM_PM_Eth_session_1 (using tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs). 2. tmnxOamPmCfgThrLossChliClear is set to 5 for the indices {OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}. 3. A previous 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test generated a CHLI Raise TCA for the forward direction (see tmnxOamPmCfgThrLossChliRaise). The TCA has not been cleared. 4. The just-closed 15-minute interval has an forward CHLI count for the forward direction (i.e. tmnxOamPmStsLossSlmChliFwd) of 5, or less. Then, SROS generates a CHLI Clear TCA (using tmnxOamPmThrClear) for the 15-minute interval, for the forward direction. If tmnxOamPmCfgThrLossChliRaise>0 AND tmnxOamPmCfgThrLossChliClear>=0, CHLI Clear TCAs can be generated for the specified indices. In this case, the maximum number of CHLI TCAs that will be generated for the specified indices across (for example) two 15 minute intervals is two: Raise and Clear. If tmnxOamPmCfgThrLossChliRaise>0 AND tmnxOamPmCfgThrLossChliClear=-1, no CHLI Clear TCAs will be generated for the specified indices. In this case, the maximum number of CHLI TCAs that will be generated for the specified indices across (for example) two 15 minute intervals is two: Raise and Raise. tmnxOamPmCfgThrLossChliRaise must be greater than tmnxOamPmCfgThrLossChliClear. Exception: the combination tmnxOamPmCfgThrLossChliRaise=-1 and tmnxOamPmCfgThrLossChliClear=-1 is supported. tmnxOamPmCfgThrLossChliClear and tmnxOamPmCfgThrLossChliClear must be set in the same SNMP Set PDU. |
| I32 tmnxOamPmCfgThrLossHliRaise | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossHliRaise specifies the raise threshold for High Loss Intervals (HLIs). tmnxOamPmCfgThrLossHliRaise has the same operating principles as tmnxOamPmCfgThrLossChliRaise. Depending on the specified indices, tmnxOamPmCfgThrLossHliRaise is the raise threshold for: tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd + tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd, tmnxOamPmStsLossSlmHliBwd, tmnxOamPmStsLossSlmHliFwd + tmnxOamPmStsLossSlmHliBwd, tmnxOamPmStsLossSlmHliFwd, tmnxOamPmStsLossTwlHliBwd, tmnxOamPmStsLossTwlHliFwd + tmnxOamPmStsLossTwlHliBwd, or tmnxOamPmStsLossTwlHliFwd. |
| I32 tmnxOamPmCfgThrLossHliClear | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.5 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossHliClear specifies the clear threshold for High Loss Intervals (HLIs). tmnxOamPmCfgThrLossHliClear has the same operating principles as tmnxOamPmCfgThrLossChliClear. tmnxOamPmCfgThrLossHliClear is the clear threshold for the list of counters specified in the tmnxOamPmCfgThrLossHliRaise DESCRIPTION clause. |
| I32 tmnxOamPmCfgThrLossUnavlIndRaise | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.6 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossUnavlIndRaise specifies the raise threshold for the number of availability indicators evaluated as Unavailable. tmnxOamPmCfgThrLossUnavlIndRaise has the same operating principles as tmnxOamPmCfgThrLossChliRaise. Depending on the specified indices, tmnxOamPmCfgThrLossUnavlIndRaise is the raise threshold for: tmnxOamPmStsLossLmmUnavlIndBwd, tmnxOamPmStsLossLmmUnavlIndFwd + tmnxOamPmStsLossLmmUnavlIndBwd, tmnxOamPmStsLossLmmUnavlIndFwd, tmnxOamPmStsLossSlmUnavlIndBwd, tmnxOamPmStsLossSlmUnavlIndFwd + tmnxOamPmStsLossSlmUnavlIndBwd, tmnxOamPmStsLossSlmUnavlIndFwd, tmnxOamPmStsLossTwlUnavlIndBwd, tmnxOamPmStsLossTwlUnavlIndFwd + tmnxOamPmStsLossTwlUnavlIndBwd, or tmnxOamPmStsLossTwlUnavlIndFwd. |
| I32 tmnxOamPmCfgThrLossUnavlIndClear | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.7 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossUnavlIndClear specifies the clear threshold for the number of availability indicators evaluated as Unavailable. tmnxOamPmCfgThrLossUnavlIndClear has the same operating principles as tmnxOamPmCfgThrLossChliClear. tmnxOamPmCfgThrLossUnavlIndClear is the clear threshold for the list of counters specified in the tmnxOamPmCfgThrLossUnavlIndRaise DESCRIPTION clause. |
| I32 tmnxOamPmCfgThrLossUndtAvlRaise | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.8 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossUndtAvlRaise specifies the raise threshold for the number of availability indicators evaluated as Available based on extrapolation from the previous state. tmnxOamPmCfgThrLossUndtAvlRaise has the same operating principles as tmnxOamPmCfgThrLossChliRaise. Depending on the specified indices, tmnxOamPmCfgThrLossUndtAvlRaise is the raise threshold for: tmnxOamPmStsLossLmmUndtAvlBwd, tmnxOamPmStsLossLmmUndtAvlFwd + tmnxOamPmStsLossLmmUndtAvlBwd, tmnxOamPmStsLossLmmUndtAvlFwd, tmnxOamPmStsLossSlmUndtAvlBwd, tmnxOamPmStsLossSlmUndtAvlFwd + tmnxOamPmStsLossSlmUndtAvlBwd, tmnxOamPmStsLossSlmUndtAvlFwd, tmnxOamPmStsLossTwlUndtAvlBwd, tmnxOamPmStsLossTwlUndtAvlFwd + tmnxOamPmStsLossTwlUndtAvlBwd, or tmnxOamPmStsLossTwlUndtAvlFwd. |
| I32 tmnxOamPmCfgThrLossUndtAvlClear | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.9 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossUndtAvlClear specifies the clear threshold for the number of availability indicators evaluated as Available based on extrapolation from the previous state. tmnxOamPmCfgThrLossUndtAvlClear has the same operating principles as tmnxOamPmCfgThrLossChliClear. tmnxOamPmCfgThrLossUndtAvlClear is the clear threshold for the list of counters specified in the tmnxOamPmCfgThrLossUndtAvlRaise DESCRIPTION clause. |
| I32 tmnxOamPmCfgThrLossUndtUnavlRais | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.10 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossUndtUnavlRais specifies the raise threshold for the number of availability indicators evaluated as Unavailable based on extrapolation from the previous state. tmnxOamPmCfgThrLossUndtUnavlRais has the same operating principles as tmnxOamPmCfgThrLossChliRaise. Depending on the specified indices, tmnxOamPmCfgThrLossUndtUnavlRais is the raise threshold for: tmnxOamPmStsLossLmmUndtUnavlBwd, tmnxOamPmStsLossLmmUndtUnavlFwd + tmnxOamPmStsLossLmmUndtUnavlBwd, tmnxOamPmStsLossLmmUndtUnavlFwd, tmnxOamPmStsLossSlmUndtUnavlBwd, tmnxOamPmStsLossSlmUndtUnavlFwd + tmnxOamPmStsLossSlmUndtUnavlBwd, tmnxOamPmStsLossSlmUndtUnavlFwd, tmnxOamPmStsLossTwlUndtUnavlBwd, tmnxOamPmStsLossTwlUndtUnavlFwd + tmnxOamPmStsLossTwlUndtUnavlBwd, or tmnxOamPmStsLossTwlUndtUnavlFwd. |
| I32 tmnxOamPmCfgThrLossUndtUnavlClr | 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.11 | Integer32 | read-write | The value of tmnxOamPmCfgThrLossUndtUnavlClr specifies the clear threshold for the number of availability indicators evaluated as Unavailable based on extrapolation from the previous state. tmnxOamPmCfgThrLossUndtUnavlClr has the same operating principles as tmnxOamPmCfgThrLossChliClear. tmnxOamPmCfgThrLossUndtUnavlClr is the clear threshold for the list of counters specified in the tmnxOamPmCfgThrLossUndtUnavlRais DESCRIPTION clause. |
| tmnxOamPmCfgThrDelayTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15 | not-accessible | tmnxOamPmCfgThrDelayTable contains threshold configuration for OAM Performance Monitoring delay TCAs. | |
| tmnxOamPmCfgThrDelayEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1 | not-accessible | tmnxOamPmCfgThrDelayEntry contains the threshold configuration for one OAM-PM bin group, bin type, and direction. For example, a row may contain the threshold configuration for bin group 255, bin type 'ifdv(3)', and direction 'twoWay(3)'. SROS creates/destroys nine rows (i.e. {'fd(1)', 'fdr(2)', 'ifdv(3)'} x {'forward(1)', 'backward(2)', 'twoWay(3)'}) when an OAM-PM bin group is created/destroyed. A manager creates/destroys an OAM-PM bin group using tmnxOamPmCfgBinGroupRowStatus. The objects in this table cannot be changed from the default value when the index value tmnxOamPmCfgBinGroupId is 1. | |
| TMN tmnxOamPmCfgForwardBackward2Way | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.1 | TmnxOamPmForwardBackwardTwoWay | not-accessible | The value of tmnxOamPmCfgForwardBackward2Way specifies the direction of the row to be configured or read. |
| U32 tmnxOamPmCfgThrDelayLowestBin | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.2 | Unsigned32 | read-write | The value of tmnxOamPmCfgThrDelayLowestBin specifies the lowest OAM-PM delay bin to be used when applying a configured Raise or Clear delay threshold. The usage is described in the tmnxOamPmCfgThrDelayRaise and tmnxOamPmCfgThrDelayClear DESCRIPTION clauses. |
| I32 tmnxOamPmCfgThrDelayRaise | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.3 | Integer32 | read-write | The value of tmnxOamPmCfgThrDelayRaise specifies the OAM-PM raise threshold for excessive delay. For example, suppose: 1. tmnxOamPmCfgThrDelayRaise=1000 and tmnxOamPmCfgThrDelayLowestBin=7 for the index values 255, 'ifdv(3)', 'twoWay(3)'. 2. Bin group 255 has been configured with 10 Inter-Frame Delay Variation (IFDV) bins (numbered 0..9), using tmnxOamPmCfgBinGroupIfdvBinCount. 3. The OAM-PM session 'oamPmSession1' is configured to use bin group 255 (using tmnxOamPmCfgSessBinGroupId). 4. OAM-PM delay TCAs are enabled for the measurement interval with indices 'oamPmSession1', 'mi15Minutes(2)' (using tmnxOamPmCfgMeasIntvlDelayTCAs and tmnxOamPmCfgMeasIntvlTCAs). 5. During a 15 minute interval belonging to a DMM test which belongs to 'oamPmSession1', the following inequality becomes true (where only the last two indices of the object are shown, and the last index is a bin number): tmnxOamPmStsDelayDmmBin2wyCount.ifdv(3).7 + tmnxOamPmStsDelayDmmBin2wyCount.ifdv(3).8 + tmnxOamPmStsDelayDmmBin2wyCount.ifdv(3).9 >= 1000 Then, a delay Raise TCA (using tmnxOamPmThrRaise) will be generated immediately. The TCA suppression and configuration rules for tmnxOamPmCfgThrDelayRaise and tmnxOamPmCfgThrDelayClear are the same as the rules for tmnxOamPmCfgThrLossChliRaise and tmnxOamPmCfgThrLossChliClear. The upper bound of this object is the maximum number of DMM PDUs (or TWAMP-Test PDUs) which can be sent in the longest supported (i.e. 24 hour) measurement interval. |
| I32 tmnxOamPmCfgThrDelayClear | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.4 | Integer32 | read-write | The value of tmnxOamPmCfgThrDelayClear specifies the OAM-PM clear threshold for excessive delay. For example, suppose: 1. tmnxOamPmCfgThrDelayClear=900 and tmnxOamPmCfgThrDelayLowestBin=7 for the index values 255, 'ifdv(3)', 'twoWay(3)'. 2. Bin group 255 has been configured with 10 Inter-Frame Delay Variation (IFDV) bins (numbered 0..9), using tmnxOamPmCfgBinGroupIfdvBinCount. 3. The OAM-PM session 'oamPmSession1' is configured to use bin group 255 (using tmnxOamPmCfgSessBinGroupId). 4. OAM-PM delay TCAs are enabled for the measurement interval with indices 'oamPmSession1', 'mi15Minutes(2)' (using tmnxOamPmCfgMeasIntvlDelayTCAs and tmnxOamPmCfgMeasIntvlTCAs). 5. At the end of a 15 minute interval belonging to a DMM test which belongs to 'oamPmSession1', the following inequality is true (where only the last two indices of the object are shown, and the last index is a bin number): tmnxOamPmStsDelayDmmBin2wyCount.ifdv(3).7 + tmnxOamPmStsDelayDmmBin2wyCount.ifdv(3).8 + tmnxOamPmStsDelayDmmBin2wyCount.ifdv(3).9 <= 900 6. Generating a delay Clear TCA is allowed (i.e. the most recent delay TCA for the specified indices was a Raise). Then, a delay Clear TCA (using tmnxOamPmThrClear) will be generated. The TCA suppression and configuration rules for tmnxOamPmCfgThrDelayRaise and tmnxOamPmCfgThrDelayClear are the same as the rules for tmnxOamPmCfgThrLossChliRaise and tmnxOamPmCfgThrLossChliClear. |
| TMN tmnxOamPmCfgThrDelayExclBinFrTca | 1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.5 | TmnxOamPmCfgBinNumOrNone | read-write | The value of tmnxOamPmCfgThrDelayExclBinFrTca specifies the bin number of the lowest delay bin to be excluded from the OAM-PM TCA calculations for the specified bin group, bin type, and direction. Configuring tmnxOamPmCfgThrDelayExclBinFrTca allows outlier high delay frames to be ignored when deciding to raise or clear a delay TCA. For example, suppose the following values are configured for bin group 255. Object Value ---------------------------------------------------- ----- tmnxOamPmCfgBinGroupFdBinCount.255 10 tmnxOamPmCfgThrDelayLowestBin.255.fd(1).forward(1) 6 tmnxOamPmCfgThrDelayExclBinFrTca.255.fd(1).forward(1) 8 Then, the decision to raise or clear a Frame Delay (FD) TCA for the forward direction will be made based on the packet counts in bins 6 and 7 (while ignoring the packet counts in bins 8 and 9). Configuring tmnxOamPmCfgThrDelayExclBinFrTca to the value -1 specifies that no bins are to be excluded. Configuring tmnxOamPmCfgThrDelayExclBinFrTca does not affect the value of delay bin packet counters (e.g. tmnxOamPmStsDelayDmmBinFwdCount). An attempt to change tmnxOamPmCfgThrDelayExclBinFrTca to a non-default value will be rejected if the specified bin does not exist. Bins are created using: tmnxOamPmCfgBinGroupFdBinCount, tmnxOamPmCfgBinGroupFdrBinCount, tmnxOamPmCfgBinGroupIfdvBinCount, and tmnxOamPmCfgBinGroupRowStatus. An attempt to change tmnxOamPmCfgThrDelayExclBinFrTca to a non-default value will be rejected if tmnxOamPmCfgThrDelayExclBinFrTca is less than or equal to tmnxOamPmCfgThrDelayLowestBin. An attempt to change tmnxOamPmCfgThrDelayExclBinFrTca will be rejected if the specified bin group (i.e. tmnxOamPmCfgBinGroupId) is 1. tmnxOamPmCfgThrDelayExclBinFrTca can be changed regardless of the specified bin group's administrative status (i.e. tmnxOamPmCfgBinGroupAdminStatus). |
| tmnxOamPmCfgBinGrpTypeDirTable | 1.3.6.1.4.1.6527.3.1.2.92.1.3.16 | not-accessible | tmnxOamPmCfgBinGrpTypeDirTable contains configuration information for the delay bins to be excluded from OAM Performance Monitoring average delay calculations. | |
| tmnxOamPmCfgBinGrpTypeDirEntry | 1.3.6.1.4.1.6527.3.1.2.92.1.3.16.1 | not-accessible | tmnxOamPmCfgBinGrpTypeDirEntry contains the delay bins to be excluded from OAM-PM average delay calculations for one OAM-PM bin group, bin type, and direction. | |
| TMX tmnxOamPmCfgBgTyDirExclBinsFrAvg | 1.3.6.1.4.1.6527.3.1.2.92.1.3.16.1.1 | TmxnOamPmBinNums | read-write | The value of tmnxOamPmCfgBgTyDirExclBinsFrAvg specifies the set of delay bins to be excluded from OAM-PM average delay calculations for the specified bin group, bin type, and direction. Configuring a set of delay bins using tmnxOamPmCfgBgTyDirExclBinsFrAvg allows outlier delay values to be excluded from average delay calculations. For example, suppose tmnxOamPmCfgBgTyDirExclBinsFrAvg has the value { bin0, bin9 } for bin group 255, bin type 'ifdv(3)', and the forward direction. Suppose the configured lower bounds for {bin group 255, bin type 'ifdv(3)'} are as follows. Bin Number Lower Bound (microseconds) ---------- -------------------------- 0 0 (not configurable) 1 1 2 5000 3 10000 4 15000 5 20000 6 25000 7 30000 8 35000 9 40000 Then, the average forward IFDV delay calculations for tests using bin group 255 will ignore any delay measurement that is less than 1 microsecond, or greater than or equal to 40000 microseconds. The following objects present the result of an average delay calculation: tmnxOamPmStsDelayDmmFwdAvg, tmnxOamPmStsDelayDmmBwdAvg, tmnxOamPmStsDelayDmm2wyAvg, tmnxOamPmStsDelayTwlFwdAvg, tmnxOamPmStsDelayTwlBwdAvg, and tmnxOamPmStsDelayTwl2wyAvg. Configuring tmnxOamPmCfgBgTyDirExclBinsFrAvg does not affect minimum delay or maximum delay calculations. An attempt to change tmnxOamPmCfgBgTyDirExclBinsFrAvg will be rejected if the specified bin group (i.e. tmnxOamPmCfgBinGroupId) is 1. An attempt to change tmnxOamPmCfgBgTyDirExclBinsFrAvg will be rejected if the specified bin group's administrative status (i.e. tmnxOamPmCfgBinGroupAdminStatus) is enabled. |
| tmnxOamPmStatsObjs | 1.3.6.1.4.1.6527.3.1.2.92.2 | |||
| tmnxOamPmStatsScalarObjs | 1.3.6.1.4.1.6527.3.1.2.92.2.1 | |||
| tmnxOamPmStatsTableObjs | 1.3.6.1.4.1.6527.3.1.2.92.2.2 | |||
| tmnxOamPmStsBaseTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1 | not-accessible | tmnxOamPmStsBaseTable contains the base statistics for OAM Performance Monitoring Measurement Interval Data Sets. The statistics in this table are common to all test types (e.g. DMM and SLM tests). | |
| tmnxOamPmStsBaseEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1 | not-accessible | tmnxOamPmStsBaseEntry contains the base statistics for one OAM Performance Monitoring Measurement Interval Data Set. Rows are created in this table when a test is started (e.g. using tmnxOamPmCfgDelayDmmAdminStatus and tmnxOamPmCfgDelayDmmOnDmndStatus). At that time, a row for the current interval (with the index value tmnxOamPmStsIntvlNum=1) is created for each row with a matching session name in tmnxOamPmCfgMeasIntvlTable. In addition, a row is created in this table for the test's 'miRaw(1)' interval. After that, the timed creation and destruction of rows in this table is explained using the following example. Suppose the configured number of intervals to be retained is as follows (where index columns are underlined with octothorpes, and 'tmnxOamPm' is abbreviated as '_'): _CfgSessName _CfgMeasIntvlDuration _CfgMeasIntvlsStored ############ ##################### -------------------- 'mySess1' 'mi15Minutes(2)' 3 Suppose statistics collection started at t = 0 (minutes). Suppose the following rows exist in tmnxOamPmStsBaseTable at t = 59 (minutes): _CfgSessName _StsBaseTestType _StsIntvlDuration _StsIntvlNum ############ ################ ################# ############ 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 1 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 2 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 3 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 4 The interval numbers are assigned as follows: 1 - the historical interval ended at t = 15 minutes 2 - the historical interval ended at t = 30 minutes 3 - the historical interval ended at t = 45 minutes 4 - the current interval Then, after the next 15 minute interval ends (e.g. at t = 61 minutes), the following rows will exist: _CfgSessName _StsBaseTestType _StsIntvlDuration _StsIntvlNum ############ ################ ################# ############ 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 2 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 3 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 4 'mySess1' 'dmm(1)' 'mi15Minutes(2)' 5 The interval numbers are assigned as follows: 2 - the historical interval ended at t = 30 minutes 3 - the historical interval ended at t = 45 minutes 4 - the historical interval ended at t = 60 minutes 5 - the current interval The row with interval number 1 was destroyed, because tmnxOamPmCfgMeasIntvlsStored=3 specifies that at most three historical intervals be retained. Rows are also destroyed in this table when the corresponding tmnxOamPmCfgMeasIntvlTable row is destroyed. When the index value tmnxOamPmStsMeasIntvlDuration is 'miRaw(1)', only one interval is available (i.e. tmnxOamPmStsIntvlNum = 1). When a test is running, the measurement interval data set for a test's 'miRaw(1)' measurement interval duration can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. The change to the objects in the specified row is as follows. Object Change on Clear Operation ---------------------------- -------------------------------------- tmnxOamPmStsBaseOperStatus No change tmnxOamPmStsBaseSuspect Set to 'true(1)' tmnxOamPmStsBaseStartTime Set to UTC time of the clear operation tmnxOamPmStsBaseElapsedTime Set to zero tmnxOamPmStsBaseTestFramesTx Set to zero tmnxOamPmStsBaseTestFramesRx Set to zero Measurement interval data sets for measurement interval durations other than 'miRaw(1)' cannot be cleared. | |
| TMN tmnxOamPmStsBaseTestType | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.1 | TmnxOamPmTestType | not-accessible | The value of tmnxOamPmStsBaseTestType specifies the type of test for which statistics are to be read (e.g. 'dmm(1)'). |
| NUM tmnxOamPmStsMeasIntvlDuration | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.2 | TmnxOamPmMeasIntervalDuration | not-accessible | The value of tmnxOamPmStsMeasIntvlDuration specifies the duration of the interval of the statistics to be read (e.g. 'mi15Minutes(2)'). |
| NUM tmnxOamPmStsIntvlNum | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.3 | TmnxOamPmStsIntvlNum | not-accessible | The value of tmnxOamPmStsIntvlNum specifies the interval number of the statistics to be read. The system's creation and destruction of interval numbers is described in the tmnxOamPmStsBaseEntry DESCRIPTION clause. |
| INT tmnxOamPmStsBaseOperStatus | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.4 | INTEGER | read-only | The value of tmnxOamPmStsBaseOperStatus indicates the operational status of the specified measurement interval data set. If the interval is historical and the operational status is 'inProgress(1)', the interval is closing (i.e. waiting for a response for the final test request sent). |
| T/F tmnxOamPmStsBaseSuspect | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.5 | TruthValue | read-only | The value of tmnxOamPmStsBaseSuspect indicates whether or not the specified measurement interval data set contains suspect information. |
| DAT tmnxOamPmStsBaseStartTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.6 | DateAndTime | read-only | The value of tmnxOamPmStsBaseStartTime indicates the start time (in UTC) of the specified measurement interval data set. |
| U32 tmnxOamPmStsBaseElapsedTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.7 | Unsigned32 | read-only | The value of tmnxOamPmStsBaseElapsedTime indicates the time elapsed since data collection started for the specified measurement interval data set. |
| U32 tmnxOamPmStsBaseTestFramesTx | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.8 | Unsigned32 | read-only | The value of tmnxOamPmStsBaseTestFramesTx indicates the number of test frames sent for the specified measurement interval data set. |
| U32 tmnxOamPmStsBaseTestFramesRx | 1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.9 | Unsigned32 | read-only | The value of tmnxOamPmStsBaseTestFramesRx indicates the number of test frames received for the specified measurement interval data set. |
| tmnxOamPmStsMeasIntvlIndexTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.2 | not-accessible | tmnxOamPmStsMeasIntvlIndexTable contains the interval number of the newest interval for all the active combinations of session, test type (e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)'). | |
| tmnxOamPmStsMeasIntvlIndexEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.2.1 | not-accessible | tmnxOamPmStsMeasIntvlIndexEntry contains the interval number of the newest interval for the specified combination of session, test type (e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)'). Rows are created in this table when a test is enabled (e.g. using tmnxOamPmCfgDelayDmmAdminStatus and tmnxOamPmCfgDelayDmmOnDmndStatus). A row is destroyed in this table when the corresponding tmnxOamPmCfgMeasIntvlTable row is destroyed. | |
| NUM tmnxOamPmStsMeasIntvlIndexNewest | 1.3.6.1.4.1.6527.3.1.2.92.2.2.2.1.1 | TmnxOamPmStsIntvlNum | read-only | The value of tmnxOamPmStsMeasIntvlIndexNewest indicates the interval number of the newest interval for the specified session, test type (e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)'). This value is provided as the tmnxOamPmStsIntvlNum index value when reading a row for the newest interval in an OAM-PM statistics table. For a running test, the newest interval is the current interval. For a stopped test, the newest interval is the most recent historical interval. A stopped test does not have a current interval. The interval number of the oldest interval for the specified session, test type, and interval duration can be computed from this value. For a running test, the formula is interval_number_of_the_oldest_interval = MAX(tmnxOamPmStsMeasIntvlIndexNewest-tmnxOamPmCfgMeasIntvlsStored, 1). For a stopped test, the formula is interval_number_of_the_oldest_interval = MAX(tmnxOamPmStsMeasIntvlIndexNewest-tmnxOamPmCfgMeasIntvlsStored+1,1). |
| tmnxOamPmStsLossSlmTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3 | not-accessible | tmnxOamPmStsLossSlmTable contains the frame loss statistics for OAM Performance Monitoring SLM (Synthetic Loss Measurement) tests. | |
| tmnxOamPmStsLossSlmEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1 | not-accessible | tmnxOamPmStsLossSlmEntry contains the SLM test statistics for one OAM Performance Monitoring Measurement Interval Data Set. A row is created in this table when a tmnxOamPmStsBaseTable row is created with tmnxOamPmStsBaseTestType = 'slm(2)'. A row is destroyed in this table when the corresponding tmnxOamPmStsBaseTable row is destroyed. When a test is running, the SLM statistics for a test's raw (i.e. 'miRaw(1)') measurement interval duration can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros all the raw SLM statistics for the specified session. | |
| U32 tmnxOamPmStsLossSlmTxFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.1 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmTxFwd indicates the number of SLM request frames transmitted in the forward direction for the specified measurement interval data set. A frame is counted if the SLM Availability state is Available at transmit time (as specified in MEF-35 Section 9.2.5). A simple count of the frames transmitted for the test is available in tmnxOamPmStsBaseTestFramesTx. |
| U32 tmnxOamPmStsLossSlmRxFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.2 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmRxFwd indicates the number of SLM request frames received in the forward direction for the specified measurement interval data set. A frame is counted if the SLM Availability state is Available at receive time (as specified in MEF-35 Section 9.2.5). A simple count of the frames received for the test is available in tmnxOamPmStsBaseTestFramesRx. |
| U32 tmnxOamPmStsLossSlmTxBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.3 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmTxBwd indicates the number of SLR reply frames transmitted in the backward direction for the specified measurement interval data set. A frame is counted if the SLM Availability state is Available at transmit time (as specified in MEF-35 Section 9.2.5). A simple count of the frames transmitted for the test is available in tmnxOamPmStsBaseTestFramesTx. |
| U32 tmnxOamPmStsLossSlmRxBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.4 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmRxBwd indicates the number of SLR reply frames received in the backward direction for the specified measurement interval data set. A frame is counted if the SLM Availability state is Available at receive time (as specified in MEF-35 Section 9.2.5). A simple count of the frames received for the test is available in tmnxOamPmStsBaseTestFramesRx. |
| U32 tmnxOamPmStsLossSlmAvailIndFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.5 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmAvailIndFwd indicates the number of availability indicators evaluated as Available in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmAvailIndBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.6 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmAvailIndBwd indicates the number of availability indicators evaluated as Available in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmUnavlIndFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.7 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmUnavlIndFwd indicates the number of availability indicators evaluated as Unavailable in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmUnavlIndBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.8 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmUnavlIndBwd indicates the number of availability indicators evaluated as Unavailable in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmUndtAvlFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.9 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmUndtAvlFwd indicates the number of availability indicators evaluated as Available in the forward direction based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the forward direction was Available. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| U32 tmnxOamPmStsLossSlmUndtUnavlFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.10 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmUndtUnavlFwd indicates the number of availability indicators evaluated as Unavailable in the forward direction based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the forward direction was Unavailable. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| U32 tmnxOamPmStsLossSlmUndtAvlBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.11 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmUndtAvlBwd indicates the number of availability indicators evaluated as Available in the backward direction based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the backward direction was Available. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| U32 tmnxOamPmStsLossSlmUndtUnavlBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.12 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmUndtUnavlBwd indicates the number of availability indicators evaluated as Unavailable in the backward direction based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the backward direction was Unavailable. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| U32 tmnxOamPmStsLossSlmHliFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.13 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmHliFwd indicates the number of High Loss Intervals (HLIs) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmHliBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.14 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmHliBwd indicates the number of High Loss Intervals (HLIs) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmChliFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.15 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmChliFwd indicates the number of Consecutive High Loss Intervals (CHLIs) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmChliBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.16 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmChliBwd indicates the number of Consecutive High Loss Intervals (CHLIs) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmMinFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.17 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmMinFlrFwd indicates the minimum Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmMaxFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.18 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmMaxFlrFwd indicates the maximum Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmAvgFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.19 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmAvgFlrFwd indicates the average Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmMinFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.20 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmMinFlrBwd indicates the minimum Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmMaxFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.21 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmMaxFlrBwd indicates the maximum Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossSlmAvgFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.22 | Unsigned32 | read-only | The value of tmnxOamPmStsLossSlmAvgFlrBwd indicates the average Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
| tmnxOamPmStsDelayDmmTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4 | not-accessible | tmnxOamPmStsDelayDmmTable contains the summarized DMM (Delay Measurement Message) statistics for OAM Performance Monitoring Measurement Interval Data Sets. | |
| tmnxOamPmStsDelayDmmEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1 | not-accessible | tmnxOamPmStsDelayDmmEntry contains the summarized DMM (Delay Measurement Message) statistics for one OAM Performance Monitoring Measurement Interval Data Set. When a row is created in tmnxOamPmStsBaseTable with tmnxOamPmStsBaseTestType = 'dmm(1)', three rows are created in this table. The three rows have the following values in the tmnxOamPmCfgBinType index column: 'fd(1)', 'fdr(2)', and 'ifdv(3)'. Rows are destroyed in this table when the corresponding tmnxOamPmStsBaseTable row is destroyed. When a test is running, the DMM statistics for a test's raw (i.e. 'miRaw(1)') measurement interval duration can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros all the raw DMM statistics for the specified session. | |
| U32 tmnxOamPmStsDelayDmmFwdMin | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.1 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmFwdMin indicates the minimum delay in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmmFwdMax | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.2 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmFwdMax indicates the maximum delay in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmmFwdAvg | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.3 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmFwdAvg indicates the average delay in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmmBwdMin | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.4 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmBwdMin indicates the minimum delay in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmmBwdMax | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.5 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmBwdMax indicates the maximum delay in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmmBwdAvg | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.6 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmBwdAvg indicates the average delay in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmm2wyMin | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.7 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmm2wyMin indicates the minimum two-way delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmm2wyMax | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.8 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmm2wyMax indicates the maximum two-way delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayDmm2wyAvg | 1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.9 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmm2wyAvg indicates the average two-way delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| tmnxOamPmStsDelayDmmBinTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.5 | not-accessible | tmnxOamPmStsDelayDmmBinTable contains the per-bin DMM (Delay Measurement Message) statistics for OAM Performance Monitoring Measurement Interval Data Sets. | |
| tmnxOamPmStsDelayDmmBinEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1 | not-accessible | tmnxOamPmStsDelayDmmBinEntry contains the per-bin DMM (Delay Measurement Message) statistics for one OAM Performance Monitoring Measurement Interval Data Set. Rows are created in this table when a corresponding row is created in tmnxOamPmStsDelayDmmTable. If the tmnxOamPmStsDelayDmmTable row is created with the index value tmnxOamPmCfgBinType = 'fd(1)', then the the number of rows created in this table is tmnxOamPmCfgBinGroupFdBinCount. Similarly, 'fdr(2)' and 'ifdv(3)'. Rows are destroyed in this table when the corresponding tmnxOamPmStsDelayDmmTable row is destroyed. When a test is running, the DMM statistics for a test's raw (i.e. 'miRaw(1)') measurement interval duration can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros all the raw DMM statistics for the specified session. | |
| U32 tmnxOamPmStsDelayDmmBinNum | 1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.1 | Unsigned32 | not-accessible | The value of tmnxOamPmStsDelayDmmBinNum specifies the bin number of the statistics to be read. |
| U32 tmnxOamPmStsDelayDmmBinFwdCount | 1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.2 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmBinFwdCount indicates the number of measurements in the forward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index values for this object are as follows (where the index names are abbreviated, and index columns are underlined with octothorpes). _SessName _IntvlDuration _IntvlNum _BinType _BinNum ########## ################ ######### ######## ####### 'dmmSess1' 'mi15Minutes(2)' 1 'fd(1)' 9 Then, the value of this object indicates the number of DMM measurements (in microseconds) in the forward direction in the first interval of 'dmmSess1' that fit in the highest configured delay range (as configured using tmnxOamPmCfgBinLowerBound). |
| U32 tmnxOamPmStsDelayDmmBinBwdCount | 1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.3 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmBinBwdCount indicates the number of measurements in the backward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index values for this object are as follows (where the index names are abbreviated, and index columns are underlined with octothorpes). _SessName _IntvlDuration _IntvlNum _BinType _BinNum ########## ################ ######### ######## ####### 'dmmSess1' 'mi15Minutes(2)' 1 'fd(1)' 0 Then, the value of this object indicates the number of DMM measurements (in microseconds) in the backward direction in the first interval of 'dmmSess1' that fit in the lowest configured delay range (as configured using tmnxOamPmCfgBinLowerBound). |
| U32 tmnxOamPmStsDelayDmmBin2wyCount | 1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.4 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayDmmBin2wyCount indicates the number of two-way measurements that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index values for this object are as follows (where the index names are abbreviated, and index columns are underlined with octothorpes). _SessName _IntvlDuration _IntvlNum _BinType _BinNum ########## ################ ######### ######## ####### 'dmmSess1' 'mi15Minutes(2)' 1 'fd(1)' 0 Then, the value of this object indicates the number of two-way DMM measurements (in microseconds) in the first interval of 'dmmSess1' that fit in the lowest configured delay range (as configured using tmnxOamPmCfgBinLowerBound). |
| tmnxOamPmStsTwlRflTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.6 | not-accessible | tmnxOamPmStsTwlRflTable contains the statistics for OAM Performance Monitoring TWAMP-Light reflectors. | |
| tmnxOamPmStsTwlRflEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1 | not-accessible | tmnxOamPmStsTwlRflEntry contains the statistics for the specified OAM Performance Monitoring TWAMP-Light reflector. SROS creates a row in this table when a corresponding row is created in tmnxOamPmCfgTwlRflTable. SROS destroys a row in this table when a corresponding row is destroyed in tmnxOamPmCfgTwlRflTable. The encoding of the index is explained in the DESCRIPTION clause for tmnxOamPmCfgTwlRflEntry. | |
| U32 tmnxOamPmStsTwlRflUpTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1.1 | Unsigned32 | read-only | The value of tmnxOamPmStsTwlRflUpTime indicates the time elapsed since the most recent transition of the reflector's administrative status to 'enabled(1)'. Zero is returned if the reflector's administrative status is 'disabled(2)'. |
| U32 tmnxOamPmStsTwlRflFramesRx | 1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1.2 | Unsigned32 | read-only | The value of tmnxOamPmStsTwlRflFramesRx indicates the number of TWAMP-Test frames received by the specified reflector. |
| U32 tmnxOamPmStsTwlRflFramesTx | 1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1.3 | Unsigned32 | read-only | The value of tmnxOamPmStsTwlRflFramesTx indicates the number of TWAMP-Test frames transmitted by the specified reflector. |
| tmnxOamPmStsDelayTwlTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7 | not-accessible | tmnxOamPmStsDelayTwlTable contains TWAMP-Light (Two-Way Active Measurement Protocol, Light) frame delay summary statistics. The frame delay summary statistics kept for TWAMP-Light tests are the same as the frame delay summary statistics specified for Ethernet DMM (Delay Measurement Message) tests in MEF-35 requirement R66. | |
| tmnxOamPmStsDelayTwlEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1 | not-accessible | tmnxOamPmStsDelayTwlEntry contains the TWAMP-Light frame delay summary statistics for one OAM Performance Monitoring Measurement Interval Data Set. When a row is created in tmnxOamPmStsBaseTable with tmnxOamPmStsBaseTestType = 'twampLight(3)' (provided tmnxOamPmCfgTwampLtCollectStats is 'collectDelayStats(1)' or 'collectDelayAndLossStats(3)'), three rows are created in this table. The three rows have the following values in the tmnxOamPmCfgBinType index column: 'fd(1)', 'fdr(2)', and 'ifdv(3)'. Rows are destroyed in this table when the corresponding tmnxOamPmStsBaseTable row is destroyed. When a TWAMP-Light test is running, all the test's raw statistics can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros the TWAMP-Light delay and TWAMP-Light loss raw statistics for the specified session. | |
| U32 tmnxOamPmStsDelayTwlFwdMin | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.1 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlFwdMin indicates the minimum delay in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwlFwdMax | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.2 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlFwdMax indicates the maximum delay in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwlFwdAvg | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.3 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlFwdAvg indicates the average delay in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwlBwdMin | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.4 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlBwdMin indicates the minimum delay in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwlBwdMax | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.5 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlBwdMax indicates the maximum delay in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwlBwdAvg | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.6 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlBwdAvg indicates the average delay in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwl2wyMin | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.7 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwl2wyMin indicates the minimum two-way delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwl2wyMax | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.8 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwl2wyMax indicates the maximum two-way delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| U32 tmnxOamPmStsDelayTwl2wyAvg | 1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.9 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwl2wyAvg indicates the average two-way delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
| tmnxOamPmStsDelayTwlBinTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.8 | not-accessible | tmnxOamPmStsDelayTwlBinTable contains TWAMP-Light (Two-Way Active Measurement Protocol, Light) frame delay per-bin statistics. The frame delay per-bin statistics kept for TWAMP-Light tests are the same as the frame delay per-bin statistics specified for Ethernet DMM (Delay Measurement Message) tests in MEF-35 requirement R66. | |
| tmnxOamPmStsDelayTwlBinEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1 | not-accessible | tmnxOamPmStsDelayTwlBinEntry contains the TWAMP-Light frame delay per-bin statistics for one OAM Performance Monitoring Measurement Interval Data Set. Rows are created in this table when a corresponding row is created in tmnxOamPmStsDelayTwlTable. If the tmnxOamPmStsDelayTwlTable row is created with the index value tmnxOamPmCfgBinType = 'fd(1)', then the the number of rows created in this table is tmnxOamPmCfgBinGroupFdBinCount. Similarly, 'fdr(2)' and 'ifdv(3)'. Rows are destroyed in this table when the corresponding tmnxOamPmStsDelayTwlTable row is destroyed. When a test is running, the TWAMP-Light statistics for a test's raw (i.e. 'miRaw(1)') measurement interval duration can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros the TWAMP-Light delay and TWAMP-Light loss raw statistics for the specified session.. | |
| U32 tmnxOamPmStsDelayTwlBinNum | 1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.1 | Unsigned32 | not-accessible | The value of tmnxOamPmStsDelayTwlBinNum specifies the bin number of the statistics to be read. |
| U32 tmnxOamPmStsDelayTwlBinFwdCount | 1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.2 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlBinFwdCount indicates the number of TWAMP-Light frame delay measurements in the forward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index values for this object are as follows (where the index names are abbreviated, and index columns are underlined with octothorpes). _SessName _IntvlDuration _IntvlNum _BinType _BinNum ########## ################ ######### ######## ####### 'twlSess1' 'mi15Minutes(2)' 1 'fd(1)' 9 Then, the value of this object indicates the number of TWAMP-Light frame delay measurements (in microseconds) in the forward direction in the first interval of 'twlSess1' that fit in the highest configured delay range (as configured using tmnxOamPmCfgBinLowerBound). |
| U32 tmnxOamPmStsDelayTwlBinBwdCount | 1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.3 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlBinBwdCount indicates the number of TWAMP-Light frame delay measurements in the backward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index values for this object are as follows (where the index names are abbreviated, and index columns are underlined with octothorpes). _SessName _IntvlDuration _IntvlNum _BinType _BinNum ########## ################ ######### ######## ####### 'twlSess1' 'mi15Minutes(2)' 1 'fd(1)' 0 Then, the value of this object indicates the number of TWAMP-Light frame delay measurements (in microseconds) in the backward direction in the first interval of 'twlSess1' that fit in the lowest configured delay range (as configured using tmnxOamPmCfgBinLowerBound). |
| U32 tmnxOamPmStsDelayTwlBin2wyCount | 1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.4 | Unsigned32 | read-only | The value of tmnxOamPmStsDelayTwlBin2wyCount indicates the number of TWAMP-Light two-way frame delay measurements that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index values for this object are as follows (where the index names are abbreviated, and index columns are underlined with octothorpes). _SessName _IntvlDuration _IntvlNum _BinType _BinNum ########## ################ ######### ######## ####### 'twlSess1' 'mi15Minutes(2)' 1 'fd(1)' 0 Then, the value of this object indicates the number of TWAMP-Light two-way frame delay measurements (in microseconds) in the first interval of 'twlSess1' that fit in the lowest configured delay range (as configured using tmnxOamPmCfgBinLowerBound). |
| tmnxOamPmStsLossLmmTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9 | not-accessible | tmnxOamPmStsLossLmmTable contains the frame loss statistics for OAM Performance Monitoring LMM (Loss Measurement Message) tests. | |
| tmnxOamPmStsLossLmmEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1 | not-accessible | tmnxOamPmStsLossLmmEntry contains the LMM test statistics for one OAM Performance Monitoring Measurement Interval Data Set. A row is created in this table when a tmnxOamPmStsBaseTable row is created with tmnxOamPmStsBaseTestType = 'lmm(4)'. A row is destroyed in this table when the corresponding tmnxOamPmStsBaseTable row is destroyed. The following objects are modelled after the MEF-35 loss parameters defined for Synthetic Loss Measurement (SLM) tests: tmnxOamPmStsLossLmmAvailIndBwd, tmnxOamPmStsLossLmmAvailIndFwd, tmnxOamPmStsLossLmmChliBwd, tmnxOamPmStsLossLmmChliFwd, tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd, tmnxOamPmStsLossLmmUnavlIndBwd, and tmnxOamPmStsLossLmmUnavlIndFwd. Hence, the REFERENCE text for this object is a MEF-35 SLM section. The value of tmnxOamPmCfgLossLmmAvAdminStatus controls the value of several objects in this table. See the tmnxOamPmCfgLossLmmAvAdminStatus DESCRIPTION clause for more information. When a test is running, the LMM statistics for a test's raw (i.e. 'miRaw(1)') measurement interval duration can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros all raw LMM statistics for the specified session. | |
| C64 tmnxOamPmStsLossLmmTxFwdEx | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.1 | Counter64 | read-only | The value of tmnxOamPmStsLossLmmTxFwd indicates the number of service frames transmitted in the forward direction for the specified measurement interval data set. This counter is computed using the procedures in Y.1731 Section 8.1. |
| C64 tmnxOamPmStsLossLmmRxFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.2 | Counter64 | read-only | The value of tmnxOamPmStsLossLmmRxFwd indicates the number of service frames received in the forward direction for the specified measurement interval data set. This counter is computed using the procedures in Y.1731 Section 8.1. |
| C64 tmnxOamPmStsLossLmmTxBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.3 | Counter64 | read-only | The value of tmnxOamPmStsLossLmmTxBwd indicates the number of service frames transmitted in the backward direction for the specified measurement interval data set. This counter is computed using the procedures in Y.1731 Section 8.1. |
| C64 tmnxOamPmStsLossLmmRxBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.4 | Counter64 | read-only | The value of tmnxOamPmStsLossLmmRxBwd indicates the number of service frames received in the backward direction for the specified measurement interval data set. This counter is computed using the procedures in Y.1731 Section 8.1. |
| U32 tmnxOamPmStsLossLmmMinFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.5 | Unsigned32 | read-only | The value of tmnxOamPmStsLossLmmMinFlrFwd indicates the minimum Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. This value is computed using the procedures in Y.1731 Section 8.1. |
| U32 tmnxOamPmStsLossLmmMaxFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.6 | Unsigned32 | read-only | The value of tmnxOamPmStsLossLmmMaxFlrFwd indicates the maximum Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. This value is computed using the procedures in Y.1731 Section 8.1. |
| U32 tmnxOamPmStsLossLmmAvgFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.7 | Unsigned32 | read-only | The value of tmnxOamPmStsLossLmmAvgFlrFwd indicates the average Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. This value is computed using the procedures in Y.1731 Section 8.1. |
| U32 tmnxOamPmStsLossLmmMinFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.8 | Unsigned32 | read-only | The value of tmnxOamPmStsLossLmmMinFlrBwd indicates the minimum Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. This value is computed using the procedures in Y.1731 Section 8.1. |
| U32 tmnxOamPmStsLossLmmMaxFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.9 | Unsigned32 | read-only | The value of tmnxOamPmStsLossLmmMaxFlrBwd indicates the maximum Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. This value is computed using the procedures in Y.1731 Section 8.1. |
| U32 tmnxOamPmStsLossLmmAvgFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.10 | Unsigned32 | read-only | The value of tmnxOamPmStsLossLmmAvgFlrBwd indicates the average Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. This value is computed using the procedures in Y.1731 Section 8.1. |
| C32 tmnxOamPmStsLossLmmAvailIndFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.11 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmAvailIndFwd indicates the number of availability indicators evaluated as Available in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmAvailIndBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.12 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmAvailIndBwd indicates the number of availability indicators evaluated as Available in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmUnavlIndFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.13 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUnavlIndFwd indicates the number of availability indicators evaluated as Unavailable in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmUnavlIndBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.14 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUnavlIndBwd indicates the number of availability indicators evaluated as Unavailable in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmUndtAvlFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.15 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUndtAvlFwd indicates the number of availability indicators evaluated as Undetermined Available, in the forward direction. This counter is incremented when: 1. It is time to calculate an availability indicator, and 2. No Loss Measurement Replies (LMRs) have been received within the availability window, and 3. The most recently declared availability indicator in the forward direction was Available. In that case, the availability indicator is Undetermined Available because: 1. No information is available to indicate if the problem is in the forward direction or the backward direction, and 2. We extrapolate from the previous state (i.e. Available). |
| C32 tmnxOamPmStsLossLmmUndtUnavlFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.16 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUndtUnavlFwd indicates the number of availability indicators evaluated as Undetermined Unavailable, in the forward direction. This counter is incremented when: 1. It is time to calculate an availability indicator, and 2. No Loss Measurement Replies (LMRs) have been received within the availability window, and 3. The most recently declared availability indicator in the forward direction was Unavailable. In that case, the availability indicator is Undetermined Unavailable because: 1. No information is available to indicate if the problem is in the forward direction or the backward direction, and 2. We extrapolate from the previous state (i.e. Unavailable). |
| C32 tmnxOamPmStsLossLmmUndtAvlBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.17 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUndtAvlBwd indicates the number of availability indicators evaluated as Undetermined Available, in the backward direction. This counter is incremented when: 1. It is time to calculate an availability indicator, and 2. No Loss Measurement Replies (LMRs) have been received within the availability window, and 3. The most recently declared availability indicator in the backward direction was Available. In that case, the availability indicator is Undetermined Available because: 1. No information is available to indicate if the problem is in the forward direction or the backward direction, and 2. We extrapolate from the previous state (i.e. Available). |
| C32 tmnxOamPmStsLossLmmUndtUnavlBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.18 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUndtUnavlBwd indicates the number of availability indicators evaluated as Undetermined Unavailable, in the backward direction. This counter is incremented when: 1. It is time to calculate an availability indicator, and 2. No Loss Measurement Replies (LMRs) have been received within the availability window, and 3. The most recently declared availability indicator in the backward direction was Unavailable. In that case, the availability indicator is Undetermined Unavailable because: 1. No information is available to indicate if the problem is in the forward direction or the backward direction, and 2. We extrapolate from the previous state (i.e. Unavailable). |
| C32 tmnxOamPmStsLossLmmHliFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.19 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmHliFwd indicates the number of High Loss Intervals (HLIs) in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmHliBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.20 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmHliBwd indicates the number of High Loss Intervals (HLIs) in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmChliFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.21 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmChliFwd indicates the number of Consecutive High Loss Intervals (CHLIs) in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmChliBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.22 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmChliBwd indicates the number of Consecutive High Loss Intervals (CHLIs) in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossLmmUndetDelTsFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.23 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUndetDelTsFwd indicates the number of undetermined MEF-35 'delta_t's (also known as 'Small Time Intervals') for the forward direction for the specified measurement interval data set. An undetermined delta_t occurs when no Loss Measurement Reply (LMR) PDUs are received during the time interval. This counter is incremented because of a problem with the data path, or because the MEF-35 delta_t for this test is too short. delta_t is configured using tmnxOamPmCfgLossLmmInterval and tmnxOamPmCfgLossLmmTxFrmsPerDelT. |
| C32 tmnxOamPmStsLossLmmUndetDelTsBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.24 | Counter32 | read-only | The value of tmnxOamPmStsLossLmmUndetDelTsBwd indicates the number of undetermined MEF-35 'delta_t's (also known as 'Small Time Intervals') for the backward direction for the specified measurement interval data set. An undetermined delta_t occurs when no Loss Measurement Reply (LMR) PDUs are received during the time interval. This counter is incremented because of a problem with the data path, or because the MEF-35 delta_t for this test is too short. delta_t is configured using tmnxOamPmCfgLossLmmInterval and tmnxOamPmCfgLossLmmTxFrmsPerDelT. |
| tmnxOamPmStsLossTwlTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10 | not-accessible | tmnxOamPmStsLossTwlTable contains TWAMP-Light (Two-Way Active Measurement Protocol, Light) frame loss statistics. The frame loss statistics kept for TWAMP-Light tests are the same as the frame loss statistics specified for Ethernet SLM (Synthetic Loss Measurement) tests in MEF-35 section 10.2. | |
| tmnxOamPmStsLossTwlEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1 | not-accessible | tmnxOamPmStsLossTwlEntry contains the TWAMP-Light loss test statistics for one OAM Performance Monitoring Measurement Interval Data Set. A row is created in this table when a tmnxOamPmStsBaseTable row is created with tmnxOamPmStsBaseTestType = 'twampLight(3)' (provided tmnxOamPmCfgTwampLtCollectStats is 'collectLossStats(2)' or 'collectDelayAndLossStats(3)'). A row is destroyed in this table when the corresponding tmnxOamPmStsBaseTable row is destroyed. When a TWAMP-Light test is running, all the test's raw statistics can be cleared using TIMETRA-CLEAR-MIB::tmnxClearAction and tmnxClearParams. A successful clear operation zeros the TWAMP-Light delay and TWAMP-Light loss raw statistics for the specified session. | |
| C32 tmnxOamPmStsLossTwlTxFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.1 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlTxFwd indicates the number of TWAMP-Light request frames transmitted in the forward direction for the specified measurement interval data set. A frame is counted if the TWAMP-Light Availability state is Available at transmit time (as specified in MEF-35 Section 9.2.5). A simple count of the frames transmitted for the test is available in tmnxOamPmStsBaseTestFramesTx. |
| C32 tmnxOamPmStsLossTwlRxFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.2 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlRxFwd indicates the number of TWAMP-Light request frames received in the forward direction for the specified measurement interval data set. A frame is counted if the TWAMP-Light Availability state is Available at receive time (as specified in MEF-35 Section 9.2.5). A simple count of the frames received for the test is available in tmnxOamPmStsBaseTestFramesRx. |
| C32 tmnxOamPmStsLossTwlTxBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.3 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlTxBwd indicates the number of TWAMP-Light reply frames transmitted in the backward direction for the specified measurement interval data set. A frame is counted if the TWAMP-Light Availability state is Available at transmit time (as specified in MEF-35 Section 9.2.5). A simple count of the frames transmitted for the test is available in tmnxOamPmStsBaseTestFramesTx. |
| C32 tmnxOamPmStsLossTwlRxBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.4 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlRxBwd indicates the number of TWAMP-Light reply frames received in the backward direction for the specified measurement interval data set. A frame is counted if the TWAMP-Light Availability state is Available at receive time (as specified in MEF-35 Section 9.2.5). A simple count of the frames received for the test is available in tmnxOamPmStsBaseTestFramesRx. |
| C32 tmnxOamPmStsLossTwlAvailIndFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.5 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlAvailIndFwd indicates the number of availability indicators evaluated as Available in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlAvailIndBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.6 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlAvailIndBwd indicates the number of availability indicators evaluated as Available in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlUnavlIndFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.7 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlUnavlIndFwd indicates the number of availability indicators evaluated as Unavailable in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlUnavlIndBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.8 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlUnavlIndBwd indicates the number of availability indicators evaluated as Unavailable in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlUndtAvlFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.9 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlUndtAvlFwd indicates the number of availability indicators evaluated as Available in the forward direction, based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the forward direction was Available. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| C32 tmnxOamPmStsLossTwlUndtUnavlFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.10 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlUndtUnavlFwd indicates the number of availability indicators evaluated as Unavailable in the forward direction, based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the forward direction was Unavailable. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| C32 tmnxOamPmStsLossTwlUndtAvlBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.11 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlUndtAvlBwd indicates the number of availability indicators evaluated as Available in the backward direction, based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the backward direction was Available. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| C32 tmnxOamPmStsLossTwlUndtUnavlBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.12 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlUndtUnavlBwd indicates the number of availability indicators evaluated as Unavailable in the backward direction, based on extrapolation from the previous state. For example, this counter will be incremented when: 1. It is time to calculate an availability indicator, and 2. All the probe requests used to calculate the availability indicator have timed out, and 3. The most recently declared availability indicator in the backward direction was Unavailable. In that case, the result is considered undetermined because no information is available to indicate if the problem is in the forward direction or the backward direction. |
| C32 tmnxOamPmStsLossTwlHliFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.13 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlHliFwd indicates the number of High Loss Intervals (HLIs) in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlHliBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.14 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlHliBwd indicates the number of High Loss Intervals (HLIs) in the backward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlChliFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.15 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlChliFwd indicates the number of Consecutive High Loss Intervals (CHLIs) in the forward direction for the specified measurement interval data set. |
| C32 tmnxOamPmStsLossTwlChliBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.16 | Counter32 | read-only | The value of tmnxOamPmStsLossTwlChliBwd indicates the number of Consecutive High Loss Intervals (CHLIs) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossTwlMinFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.17 | Unsigned32 | read-only | The value of tmnxOamPmStsLossTwlMinFlrFwd indicates the minimum Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossTwlMaxFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.18 | Unsigned32 | read-only | The value of tmnxOamPmStsLossTwlMaxFlrFwd indicates the maximum Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossTwlAvgFlrFwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.19 | Unsigned32 | read-only | The value of tmnxOamPmStsLossTwlAvgFlrFwd indicates the average Frame Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossTwlMinFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.20 | Unsigned32 | read-only | The value of tmnxOamPmStsLossTwlMinFlrBwd indicates the minimum Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossTwlMaxFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.21 | Unsigned32 | read-only | The value of tmnxOamPmStsLossTwlMaxFlrBwd indicates the maximum Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
| U32 tmnxOamPmStsLossTwlAvgFlrBwd | 1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.22 | Unsigned32 | read-only | The value of tmnxOamPmStsLossTwlAvgFlrBwd indicates the average Frame Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
| tmnxOamPmStsTcaDelayTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.11 | not-accessible | tmnxOamPmStsTcaDelayTable contains statistics for delay-based OAM-PM Threshold Crossing Alerts (TCAs). | |
| tmnxOamPmStsTcaDelayEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.11.1 | not-accessible | tmnxOamPmStsTcaDelayEntry contains the OAM-PM delay TCA statistics for the combination of an OAM-PM session name, test type, bin type, and direction (e.g. {'oam_pm_sess_1', 'dmm(1)', 'ifdv(3)', 'twoWay(3)'}). Nine rows are created/destroyed in this table when a delay test is created/destroyed. A delay test is created/destroyed using tmnxOamPmCfgDelayDmmRowStatus or tmnxOamPmCfgTwampLtRowStatus. The nine rows are indexed by the session name, the test type, and the nine combinations of bin type and direction. | |
| DAT tmnxOamPmStsTcaDelayLastTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.11.1.1 | DateAndTime | read-only | The value of tmnxOamPmStsTcaDelayLastTime indicates the UTC date and time at the start of the measurement interval which generated the most recent delay-based Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaDelayOperState | 1.3.6.1.4.1.6527.3.1.2.92.2.2.11.1.2 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaDelayOperState indicates the operational state of delay-based TCAs for the specified indices. |
| tmnxOamPmStsTcaLossFwBwAgTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12 | not-accessible | tmnxOamPmStsTcaLossFwBwAgTable contains statistics for loss-based OAM-PM Threshold Crossing Alerts (TCAs). The subset of the TCA loss statistics that are kept in the forward, backward, and aggregate directions is available using this table. | |
| tmnxOamPmStsTcaLossFwBwAgEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1 | not-accessible | tmnxOamPmStsTcaLossFwBwAgEntry contains the TCA statistics for the forward, backward, or aggregate direction of one OAM-PM loss test. For example, a row may contain TCA statistics for the forward direction for the SLM test belonging to OAM-PM session OAM_PM_Eth_session_1. | |
| DAT tmnxOamPmStsTcaLossChliLastTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.1 | DateAndTime | read-only | The value of tmnxOamPmStsTcaLossChliLastTime indicates the UTC date and time at the start of the measurement interval which generated the most recent Consecutive High Loss Interval (CHLI) Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no CHLI TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaLossChliOperState | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.2 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaLossChliOperState indicates the operational state of Consecutive High Loss Interval (CHLI) TCAs for the specified indices. |
| DAT tmnxOamPmStsTcaLossHliLastTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.3 | DateAndTime | read-only | The value of tmnxOamPmStsTcaLossHliLastTime indicates the UTC date and time at the start of the measurement interval which generated the most recent High Loss Interval (HLI) Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no HLI TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaLossHliOperState | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.4 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaLossHliOperState indicates the operational state of High Loss Interval (HLI) TCAs for the specified indices. |
| DAT tmnxOamPmStsTcaLossUnavlIndLTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.5 | DateAndTime | read-only | The value of tmnxOamPmStsTcaLossUnavlIndLTime indicates the UTC date and time at the start of the measurement interval which generated the most recent Unavailability Indicator Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no Unavailability Indicator TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaLossUnavlIndOprSt | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.6 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaLossUnavlIndOprSt indicates the operational state of Unavailability Indicator TCAs for the specified indices. |
| DAT tmnxOamPmStsTcaLossUndtAvlLTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.7 | DateAndTime | read-only | The value of tmnxOamPmStsTcaLossUndtAvlLTime indicates the UTC date and time at the start of the measurement interval which generated the most recent Undetermined Availability Indicator Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no Undetermined Availability Indicator TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaLossUndtAvlOperSt | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.8 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaLossUndtAvlOperSt indicates the operational state of Undetermined Availability Indicator TCAs for the specified indices. |
| DAT tmnxOamPmStsTcaLossUndtUnavlLTim | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.9 | DateAndTime | read-only | The value of tmnxOamPmStsTcaLossUndtUnavlLTim indicates the UTC date and time at the start of the measurement interval which generated the most recent Undetermined Unavailability Indicator Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no Undetermined Unavailability Indicator TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaLossUndtUnavlOpSt | 1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.10 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaLossUndtUnavlOpSt indicates the operational state of Undetermined Unavailability Indicator TCAs for the specified indices. |
| tmnxOamPmStsTcaLossFwBwTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.13 | not-accessible | tmnxOamPmStsTcaLossFwBwTable contains statistics for loss-based OAM-PM Threshold Crossing Alerts (TCAs). The subset of the TCA loss statistics that are kept in the forward and backward directions is available using this table. | |
| tmnxOamPmStsTcaLossFwBwEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.13.1 | not-accessible | tmnxOamPmStsTcaLossFwBwEntry contains TCA statistics for the forward or backward direction of one OAM-PM loss test. For example, a row may contain TCA statistics for the forward direction for the SLM test belonging to OAM-PM session OAM_PM_Eth_session_1. | |
| DAT tmnxOamPmStsTcaLossAvgFlrLstTime | 1.3.6.1.4.1.6527.3.1.2.92.2.2.13.1.1 | DateAndTime | read-only | The value of tmnxOamPmStsTcaLossAvgFlrLstTime indicates the UTC date and time at the start of the measurement interval which generated the most recent Average Frame Loss Ratio (FLR) Raise or Clear TCA for the specified indices. Measurement interval start times are reported using tmnxOamPmStsBaseStartTime. The TCAs are tmnxOamPmThrRaise and tmnxOamPmThrClear. DateAndTime.year = 0 is returned if no Average FLR TCAs have been generated for the specified indices since system start up. |
| TMN tmnxOamPmStsTcaLossAvgFlrOperSt | 1.3.6.1.4.1.6527.3.1.2.92.2.2.13.1.2 | TmnxOamPmStsTcaOperState | read-only | The value of tmnxOamPmStsTcaLossAvgFlrOperSt indicates the operational state of Average Frame Loss Ratio (FLR) TCAs for the specified indices. |
| tmnxOamPmStsSessIpTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.14 | not-accessible | tmnxOamPmStsSessIpTable contains status information for OAM-PM sessions with tmnxOamPmCfgSessTestFamily equal to 'ip(2)'. | |
| tmnxOamPmStsSessIpEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.14.1 | not-accessible | tmnxOamPmStsSessIpEntry contains status information for an OAM-PM session with tmnxOamPmCfgSessTestFamily equal to 'ip(2)'. | |
| INE tmnxOamPmStsSessIpSrcUdpPort | 1.3.6.1.4.1.6527.3.1.2.92.2.2.14.1.1 | InetPortNumber | read-only | The value of tmnxOamPmStsSessIpSrcUdpPort indicates the source UDP port allocated for the specified OAM-PM IP session. The allocation of source UDP ports is described in the DESCRIPTION clause of tmnxOamPmCfgSessIpSrcUdpPort. If the source UDP port has not been successfully allocated (or has been deallocated), tmnxOamPmStsSessIpSrcUdpPort is zero. |
| tmnxOamPmStsTestTable | 1.3.6.1.4.1.6527.3.1.2.92.2.2.15 | not-accessible | tmnxOamPmStsTestTable contains status information for OAM-PM tests. Additional test status information is available in tmnxOamPmCfgDelayDmmTable, tmnxOamPmCfgLossLmmTable, tmnxOamPmCfgLossSlmTable, and tmnxOamPmCfgTwampLtTable. | |
| tmnxOamPmStsTestEntry | 1.3.6.1.4.1.6527.3.1.2.92.2.2.15.1 | not-accessible | tmnxOamPmStsTestEntry contains status information for the OAM-PM test specified by the indices. A row is created/destroyed in this table when an OAM-PM test is created/destroyed. An OAM-PM test is created/destroyed using tmnxOamPmCfgDelayDmmRowStatus, tmnxOamPmCfgLossLmmRowStatus, tmnxOamPmCfgLossSlmRowStatus, or tmnxOamPmCfgTwampLtRowStatus. | |
| TMN tmnxOamPmStsTestDetectTxError | 1.3.6.1.4.1.6527.3.1.2.92.2.2.15.1.1 | TmnxOamPmDetectableTxError | read-only | The value of tmnxOamPmStsTestDetectTxError indicates a reason for the specified test's current inability (if any) to launch request frames. For example, 'ethParentAdminDown(4)' could be returned for an SLM test if the MEP to be tested is associated with a SAP which is administratively down. Not all request frame transmit failures are detected by this mechanism. It is possible that 'none(1)' will be returned when the test is unable to transmit frames. |
| tmnxOamPmNotificationObjs | 1.3.6.1.4.1.6527.3.1.2.92.3 | |||
| INT tmnxOamPmNotifThrType | 1.3.6.1.4.1.6527.3.1.2.92.3.1 | INTEGER | accessible-for-notify | The value of tmnxOamPmNotifThrType indicates the type of the OAM-PM threshold crossing being reported. The code points are as follows. delay (1) - a threshold (e.g.tmnxOamPmCfgThrDelayRaise) on a MEF-35 delay count has been crossed lossAvgFlr (2) - a threshold (e.g. tmnxOamPmCfgThrLossAvgFlrClear) on a MEF-35 Average Frame Loss Ratio (FLR) has been crossed lossChli (3) - a threshold (e.g. tmnxOamPmCfgThrLossChliRaise) on a MEF-35 Consecutive High Loss Interval (CHLI) count has been crossed lossHlii (4) - a threshold (e.g. tmnxOamPmCfgThrLossHliClear) on a MEF-35 High Loss Interval (HLI) count has been crossed lossUnavail (5) - a threshold (e.g. tmnxOamPmCfgThrLossUnavlIndRaise) on a MEF-35 Unavailability Indicator count has been crossed lossUndetAvail (6) - a threshold (e.g. tmnxOamPmCfgThrLossUndtAvlClear) on an Undetermined Availability Indicator count has been crossed lossUndetUnavail(7) - a threshold (e.g. tmnxOamPmCfgThrLossUndtUnavlRais) on an Undetermined Unavailability Indicator count has been crossed |
| INT tmnxOamPmNotifThrDirection | 1.3.6.1.4.1.6527.3.1.2.92.3.2 | INTEGER | accessible-for-notify | The value of tmnxOamPmNotifThrDirection indicates the traffic flow direction of the OAM-PM threshold crossing being reported. The semantics of the code points are documented in the DESCRIPTION clauses of TmnxOamPmForwardBackwardAggr and TmnxOamPmForwardBackwardTwoWay. |
| INT tmnxOamPmNotifThrDelayBinType | 1.3.6.1.4.1.6527.3.1.2.92.3.3 | INTEGER | accessible-for-notify | The value of tmnxOamPmNotifThrDelayBinType indicates the bin type of the OAM-PM delay threshold crossing being reported. 'notApplicable(0)' is used for loss tests (i.e. when tmnxOamPmNotifThrType is not 'delay(1)'). The semantics of the other code points are documented in the DESCRIPTION clause of TmnxOamPmBinType. |
| INT tmnxOamPmNotifThrStateType | 1.3.6.1.4.1.6527.3.1.2.92.3.4 | INTEGER | accessible-for-notify | The value of tmnxOamPmNotifThrStateType indicates whether or not the OAM-PM threshold crossing being reported is stateful. The code points are as follows. stateful (1) - a clearing threshold is defined for the condition. stateless(2) - a clearing threshold is not defined for the condition. The DESCRIPTION clause of tmnxOamPmCfgThrLossChliClear explains the change in behavior when a clearing threshold is defined. |
| U32 tmnxOamPmNotifThrCfgRaise | 1.3.6.1.4.1.6527.3.1.2.92.3.5 | Unsigned32 | accessible-for-notify | The value of tmnxOamPmNotifThrCfgRaise indicates the configured raise threshold for the OAM-PM Raise trap being reported. The value reported is one of the following (where the selection is made by other objects in the trap): tmnxOamPmCfgThrDelayRaise, tmnxOamPmCfgThrLossAvgFlrRaise, tmnxOamPmCfgThrLossChliRaise, tmnxOamPmCfgThrLossHliRaise, tmnxOamPmCfgThrLossUnavlIndRaise, tmnxOamPmCfgThrLossUndtAvlRaise, or tmnxOamPmCfgThrLossUndtUnavlRais. |
| U32 tmnxOamPmNotifThrCfgClear | 1.3.6.1.4.1.6527.3.1.2.92.3.6 | Unsigned32 | accessible-for-notify | The value of tmnxOamPmNotifThrCfgClear indicates the configured clear threshold for the OAM-PM Clear trap being reported. The value reported is one of the following (where the selection is made by other objects in the trap): tmnxOamPmCfgThrDelayClear, tmnxOamPmCfgThrLossAvgFlrClear, tmnxOamPmCfgThrLossChliClear, tmnxOamPmCfgThrLossHliClear, tmnxOamPmCfgThrLossUnavlIndClear, tmnxOamPmCfgThrLossUndtAvlClear, or tmnxOamPmCfgThrLossUndtUnavlClr. |
| U32 tmnxOamPmNotifThrOperRaise | 1.3.6.1.4.1.6527.3.1.2.92.3.7 | Unsigned32 | accessible-for-notify | The value of tmnxOamPmNotifThrOperRaise indicates the value of the delay or loss counter which met or exceeded tmnxOamPmNotifThrCfgRaise, resulting in the OAM-PM Raise trap being reported. The value reported is one of the following (where the selection is made by other objects in the trap): tmnxOamPmStsDelayDmmBin2wyCount, tmnxOamPmStsDelayDmmBinBwdCount, tmnxOamPmStsDelayDmmBinFwdCount, tmnxOamPmStsDelayTwlBin2wyCount, tmnxOamPmStsDelayTwlBinBwdCount, tmnxOamPmStsDelayTwlBinFwdCount, tmnxOamPmStsLossLmmAvgFlrBwd, tmnxOamPmStsLossLmmAvgFlrFwd, tmnxOamPmStsLossLmmChliBwd, tmnxOamPmStsLossLmmChliFwd + tmnxOamPmStsLossLmmChliBwd, tmnxOamPmStsLossLmmChliFwd, tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd + tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd, tmnxOamPmStsLossLmmUnavlIndBwd, tmnxOamPmStsLossLmmUnavlIndFwd + tmnxOamPmStsLossLmmUnavlIndBwd, tmnxOamPmStsLossLmmUnavlIndFwd, tmnxOamPmStsLossLmmUndtAvlBwd, tmnxOamPmStsLossLmmUndtAvlFwd + tmnxOamPmStsLossLmmUndtAvlBwd, tmnxOamPmStsLossLmmUndtAvlFwd, tmnxOamPmStsLossLmmUndtUnavlBwd, tmnxOamPmStsLossLmmUndtUnavlFwd + tmnxOamPmStsLossLmmUndtUnavlBwd, tmnxOamPmStsLossLmmUndtUnavlFwd, tmnxOamPmStsLossSlmAvgFlrBwd, tmnxOamPmStsLossSlmAvgFlrFwd, tmnxOamPmStsLossSlmChliBwd, tmnxOamPmStsLossSlmChliFwd + tmnxOamPmStsLossSlmChliBwd, tmnxOamPmStsLossSlmChliFwd, tmnxOamPmStsLossSlmHliBwd, tmnxOamPmStsLossSlmHliFwd + tmnxOamPmStsLossSlmHliBwd, tmnxOamPmStsLossSlmHliFwd, tmnxOamPmStsLossSlmUnavlIndBwd, tmnxOamPmStsLossSlmUnavlIndFwd + tmnxOamPmStsLossSlmUnavlIndBwd, tmnxOamPmStsLossSlmUnavlIndFwd, tmnxOamPmStsLossSlmUndtAvlBwd, tmnxOamPmStsLossSlmUndtAvlFwd + tmnxOamPmStsLossSlmUndtAvlBwd, tmnxOamPmStsLossSlmUndtAvlFwd, tmnxOamPmStsLossSlmUndtUnavlBwd, tmnxOamPmStsLossSlmUndtUnavlFwd + tmnxOamPmStsLossSlmUndtUnavlBwd, tmnxOamPmStsLossSlmUndtUnavlFwd, tmnxOamPmStsLossTwlAvgFlrBwd, tmnxOamPmStsLossTwlAvgFlrFwd, tmnxOamPmStsLossTwlChliBwd, tmnxOamPmStsLossTwlChliFwd + tmnxOamPmStsLossTwlChliBwd, tmnxOamPmStsLossTwlChliFwd, tmnxOamPmStsLossTwlHliBwd, tmnxOamPmStsLossTwlHliFwd + tmnxOamPmStsLossTwlHliBwd, tmnxOamPmStsLossTwlHliFwd, tmnxOamPmStsLossTwlUnavlIndBwd, tmnxOamPmStsLossTwlUnavlIndFwd + tmnxOamPmStsLossTwlUnavlIndBwd, tmnxOamPmStsLossTwlUnavlIndFwd, tmnxOamPmStsLossTwlUndtAvlBwd, tmnxOamPmStsLossTwlUndtAvlFwd + tmnxOamPmStsLossTwlUndtAvlBwd, tmnxOamPmStsLossTwlUndtAvlFwd, tmnxOamPmStsLossTwlUndtUnavlBwd, tmnxOamPmStsLossTwlUndtUnavlFwd + tmnxOamPmStsLossTwlUndtUnavlBwd, or tmnxOamPmStsLossTwlUndtUnavlFwd. One of the '2wy' values is reported when tmnxOamPmNotifThrDirection is 'twoWay(3)'. One of the summed values is reported when tmnxOamPmNotifThrDirection is 'aggregate(4)'. |
| U32 tmnxOamPmNotifThrOperClear | 1.3.6.1.4.1.6527.3.1.2.92.3.8 | Unsigned32 | accessible-for-notify | The value of tmnxOamPmNotifThrOperClear indicates the value of the delay or loss counter which met or fell below tmnxOamPmNotifThrCfgClear, resulting in the OAM-PM Clear trap being reported. The value reported is one of the values shown in the tmnxOamPmNotifThrOperRaise DESCRIPTION clause. |
| U32 tmnxOamPmNotifThrBinLowerBound | 1.3.6.1.4.1.6527.3.1.2.92.3.9 | Unsigned32 | accessible-for-notify | The value of tmnxOamPmNotifThrBinLowerBound indicates the configured lower bound (in microseconds) of the MEF-35 delay bin which is the subject of the enclosing notification. When this object is part of a tmnxOamPmThrRaise notification, the notification was raised because the number of PDUs with delay greater than or equal to tmnxOamPmNotifThrBinLowerBound (in the specified measurement interval) met or exceeded the configured threshold tmnxOamPmCfgThrDelayRaise. When this object is part of a tmnxOamPmThrClear notification, the notification was raised because the number of PDUs with delay greater than or equal to tmnxOamPmNotifThrBinLowerBound (in the specified measurement interval) was less than or equal to the configured threshold tmnxOamPmCfgThrDelayClear. For example, suppose an OAM-PM delay raise threshold is configured with tmnxOamPmCfgThrDelayRaise = 1000 and tmnxOamPmCfgThrDelayLowestBin = 6. Suppose the configured lower bound (i.e. tmnxOamPmCfgBinLowerBound) for the specified bin 6 is 30,000 microseconds. Then, if the count of PDUs with delay at or above 30,000 microseconds (e.g. tmnxOamPmStsDelayDmmBin2wyCount) is 1000, and a TCA is raised, this object will report 30,000. This value must be ignored if the enclosing notification is a loss TCA (i.e. when tmnxOamPmNotifThrType is not 'delay(1)'). |
| tmnxOamPmNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.92 | |||
| tmnxOamPmNotifications | 1.3.6.1.4.1.6527.3.1.3.92.0 | |||
| NTF tmnxOamPmThrRaise | 1.3.6.1.4.1.6527.3.1.3.92.0.1 | [CAUSE] A tmnxOamPmThrRaise trap is sent when an OAM-PM loss or delay counter meets or exceeds its configured raise threshold. If an Average Frame Loss Ratio (FLR) threshold (i.e. tmnxOamPmCfgThrLossAvgFlrRaise) is met or exceeded, the tmnxOamPmThrRaise trap is sent at the end of the measurement interval. If another type of threshold (e.g. tmnxOamPmCfgThrLossHliRaise) is met or exceeded, the tmnxOamPmThrRaise trap is sent when the problem is detected. The Average FLR threshold is a special case because the measured Average FLR can fluctuate during a measurement interval. At most one tmnxOamPmThrRaise trap is sent per threshold type during one OAM-PM measurement interval. For example, at most one tmnxOamPmThrRaise trap is sent to record an excessive High Loss Indicator (HLI) count in the forward direction seen in a particular 15 minute interval belonging to the SLM test belonging to OAM-PM session 'oamPmSession1'. OAM-PM thresholds are explained in the DESCRIPTION clauses of tmnxOamPmCfgThrDelayTable, tmnxOamPmCfgThrLossFwBwAgTable, and tmnxOamPmCfgThrLossFwBwTable. OAM-PM counters are explained in the DESCRIPTION clauses of the tmnxOamPmStatsTableObjs tables. [EFFECT] For an LMM test, the loss of live traffic has met or exceeded a configured threshold. For the other test types, the loss or delay of OAM-PM test probes has met or exceeded a configured threshold, indicating possible excessive loss or excessive delay of live traffic. [RECOVERY] Fix the cause of the excessive loss or excessive delay. | ||
| NTF tmnxOamPmThrClear | 1.3.6.1.4.1.6527.3.1.3.92.0.2 | [CAUSE] A tmnxOamPmThrClear trap is sent at the end of an OAM-PM measurement interval when a loss or delay counter meets or falls below its configured clear threshold. At most one tmnxOamPmThrClear trap is sent per tmnxOamPmThrRaise trap. OAM-PM thresholds are explained in the DESCRIPTION clauses of tmnxOamPmCfgThrDelayTable, tmnxOamPmCfgThrLossFwBwAgTable, and tmnxOamPmCfgThrLossFwBwTable. OAM-PM counters are explained in the DESCRIPTION clauses of the tmnxOamPmStatsTableObjs tables. [EFFECT] For an LMM test, the loss of live traffic has met or fallen below a configured threshold. For other test types, the loss or delay of OAM-PM test probes has met or fallen below a configured threshold, indicating a possible improvement in the loss or delay of live traffic. [RECOVERY] No recovery is required for this trap. |
RFC description
Nokia SROS implementation of Service OAM Performance Monitoring with detailed statistics and metrics.
Start monitoring Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.