TIMETRA-QOS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, MacAddress, TruthValue, StorageType, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC AtmServiceCategory, AtmTrafficDescrParamIndex, AtmVcIdentifier FROM ATM-TC-MIB InetAddress, InetAddressType, InetAddressIPv6, InetAddressPrefixLength FROM INET-ADDRESS-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM TIMETRA-GLOBAL-MIB TmnxMcMlpppClassIndex FROM TIMETRA-PORT-MIB Dot1PPriority, IpAddressPrefixLength, ServiceAccessPoint,TItemDescription, TNamedItem, TNamedItemOrEmpty, TLNamedItemOrEmpty, TDSCPValue, TDSCPName, TDSCPNameOrEmpty, TIpProtocol, TTcpUdpPort, TTcpUdpPortOperator, TFrameType, TFCName, TLspExpValue, TQueueId, TIngressQueueId, TEgressQueueId, TIngressHsmdaQueueId, TEgressHsmdaQueueId, TPortSchedulerPIR, TPortSchedulerCIR, THsmdaSchedulerPolicyGroupId, TWeight, TCIRRate, TPIRRate, THsmdaWeight, THsmdaWeightClass, THsmdaWrrWeight, THPolPIRRate, THPolCIRRate, TNonZeroWeight, TmnxEnabledDisabled, TSapIngressPolicyID, TSapEgressPolicyID, TIngressHsmdaPerPacketOffset, TEgressHsmdaPerPacketOffset, THsmdaPIRKRate, THsmdaCIRKRate, THsmdaPIRMRate, TIngressHsmdaCounterIdOrZero, TEgressHsmdaCounterIdOrZero, TMlpppQoSProfileId, TFCNameOrEmpty, TMcFrQoSProfileId, TNetworkPolicyID, TItemScope, TItemMatch, TPriority, TPriorityOrDefault, TProfile, TProfileOrDei, TDEProfile, TDEProfileOrDei, TProfileOrNone, TAdaptationRule, TRemarkType, TPrecValue, TPrecValueOrNone, TBurstSize, TBurstPercent, TBurstHundredthsOfPercent, TBurstPercentOrDefault, TRatePercent, TPIRRatePercent, TLevel, TLevelOrDefault, TQueueMode, TEntryId, TMatchCriteria, TAtmTdpDescrType, TDEValue, TPolicerWeight, TIngPolicerId, TEgrPolicerId, TEgrPolicerIdOrNone, TIngPolicerIdOrNone, TRateType, TPerPacketOffset, TBurstSizeBytes, TPlcrBurstSizeBytes, TmnxIngPolicerStatMode, TBurstLimit, TClassBurstLimit, TmnxEgrPolicerStatMode, QTagFullRange, QTagFullRangeOrNone, TMacFilterType, TBWRateType, TEgressQPerPacketOffset,TPolicerRateType, THsmdaPolicyIncludeQueues, THsmdaPolicyScheduleClass, THSMDABurstSizeBytes, THSMDAQueueBurstLimit, TProfileUseDEOrNone, TmnxSlopeMap, TAdvCfgRate, TMaxDecRate, TPortSchedulerPIRRate, THPolVirtualSchePIRRate, THPolVirtualScheCIRRate FROM TIMETRA-TC-MIB ; timetraQosMIBModule MODULE-IDENTITY LAST-UPDATED "201102010000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel-Lucent SROS systems. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "0902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-QOS-MIB." REVISION "0807010000Z" DESCRIPTION "Rev 6.1 01 Jul 2008 00:00 6.1 release of the TIMETRA-QOS-MIB." REVISION "0801010000Z" DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 6.0 release of the TIMETRA-QOS-MIB." REVISION "0701010000Z" DESCRIPTION "Rev 5.0 01 Jan 2007 00:00 5.0 release of the TIMETRA-QOS-MIB." REVISION "0602280000Z" DESCRIPTION "Rev 4.0 28 Feb 2006 00:00 4.0 release of the TIMETRA-QOS-MIB." REVISION "0508310000Z" DESCRIPTION "Rev 3.0 31 Aug 2005 00:00 3.0 release of the TIMETRA-QOS-MIB." REVISION "0501240000Z" DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 2.1 release of the TIMETRA-QOS-MIB." REVISION "0401150000Z" DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 2.0 release of the TIMETRA-QOS-MIB." REVISION "0308150000Z" DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 1.2 release of the TIMETRA-QOS-MIB." REVISION "200301200000Z" DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 1.0 Release of the TIMETRA-QOS-MIB." REVISION "200105290000Z" DESCRIPTION "Rev 0.1 29 May 2001 00:00 Initial version of the TIMETRA-QOS-MIB." ::= { timetraSRMIBModules 16 } tQosObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 16 } tQosNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 16} tQosNotifications OBJECT IDENTIFIER ::= { tQosNotifyPrefix 0} tmnxQosConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 16 } tDSCPObjects OBJECT IDENTIFIER ::= { tQosObjects 1 } tFCObjects OBJECT IDENTIFIER ::= { tQosObjects 2 } tSapIngressObjects OBJECT IDENTIFIER ::= { tQosObjects 3 } tSapEgressObjects OBJECT IDENTIFIER ::= { tQosObjects 4 } tNetworkObjects OBJECT IDENTIFIER ::= { tQosObjects 5 } tNetworkQueueObjects OBJECT IDENTIFIER ::= { tQosObjects 6 } tSharedQueueObjects OBJECT IDENTIFIER ::= { tQosObjects 7 } tSlopeObjects OBJECT IDENTIFIER ::= { tQosObjects 10 } tSchedulerObjects OBJECT IDENTIFIER ::= { tQosObjects 12 } tQosTimeStampObjects OBJECT IDENTIFIER ::= { tQosObjects 20 } tAtmTdpObjects OBJECT IDENTIFIER ::= { tQosObjects 21 } tPoolObjects OBJECT IDENTIFIER ::= { tQosObjects 22 } tMcMlpppIngressObjects OBJECT IDENTIFIER ::= { tQosObjects 23 } tMcMlpppEgressObjects OBJECT IDENTIFIER ::= { tQosObjects 24 } tMcFrIngressObjects OBJECT IDENTIFIER ::= { tQosObjects 25 } tMcFrEgressObjects OBJECT IDENTIFIER ::= { tQosObjects 26 } tQosPolicerObjects OBJECT IDENTIFIER ::= { tQosObjects 27 } tWrrObjects OBJECT IDENTIFIER ::= { tQosObjects 28 } -- -- -- mib objects -- -- -- TmnxMcFrClassIndex -- TmnxMcFrClassIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxMcFrClassIndex indicates the class of a Multiclass Fr bundle. For example, a 4-class Fr link has 4 classes with indices 0, 1, 2, and 3." SYNTAX INTEGER (0..15) -- -- DSCP Name -> DSCP value mapping table -- tDSCPNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TDSCPNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter)." ::= { tDSCPObjects 1 } tDSCPNameEntry OBJECT-TYPE SYNTAX TDSCPNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation." INDEX { tDSCPName } ::= { tDSCPNameTable 1 } TDSCPNameEntry ::= SEQUENCE { tDSCPName TDSCPName, tDSCPNameRowStatus RowStatus, tDSCPNameStorageType StorageType, tDSCPNameDscpValue TDSCPValue, tDSCPNameLastChanged TimeStamp } tDSCPName OBJECT-TYPE SYNTAX TDSCPName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name assigned to the DSCP Value." REFERENCE "" ::= { tDSCPNameEntry 1 } tDSCPNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tDSCPNameEntry 2 } tDSCPNameStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type of this row in the table." DEFVAL { nonVolatile } ::= { tDSCPNameEntry 3 } tDSCPNameDscpValue OBJECT-TYPE SYNTAX TDSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The DSCP Value." REFERENCE "" DEFVAL { 0 } ::= { tDSCPNameEntry 4 } tDSCPNameLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tDSCPNameTable." ::= { tDSCPNameEntry 5 } -- -- Forwarding Class name table -- tFCNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TFCNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue)." ::= { tFCObjects 1 } tFCNameEntry OBJECT-TYPE SYNTAX TFCNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation." INDEX { tFCName } ::= { tFCNameTable 1 } TFCNameEntry ::= SEQUENCE { tFCName TFCName, tFCRowStatus RowStatus, tFCStorageType StorageType, tFCValue Integer32, tFCNameLastChanged TimeStamp } tFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding class name." REFERENCE "" ::= { tFCNameEntry 1 } tFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tFCNameEntry 2 } tFCStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type of this row in the table." DEFVAL { nonVolatile } ::= { tFCNameEntry 3 } tFCValue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "FC Value." REFERENCE "" DEFVAL { 0 } ::= { tFCNameEntry 4 } tFCNameLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tFCNameTable." ::= { tFCNameEntry 5 } -- -- sap-ingress policy table -- tSapIngressTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tSapIngressObjects 1 } tSapIngressEntry OBJECT-TYPE SYNTAX TSapIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tSapIngressIndex } ::= { tSapIngressTable 1 } TSapIngressEntry ::= SEQUENCE { tSapIngressIndex TSapIngressPolicyID, tSapIngressRowStatus RowStatus, tSapIngressScope TItemScope, tSapIngressDescription TItemDescription, tSapIngressDefaultFC TNamedItem, tSapIngressDefaultFCPriority TPriority, tSapIngressMatchCriteria TMatchCriteria, tSapIngressLastChanged TimeStamp, tSapIngressHsmdaPacketOffset TIngressHsmdaPerPacketOffset, tSapIngressDefFCHsmdaCntrOvr TIngressHsmdaCounterIdOrZero, tSapIngressMacCritType TMacFilterType, tSapIngressPolicyName TLNamedItemOrEmpty } tSapIngressIndex OBJECT-TYPE SYNTAX TSapIngressPolicyID (1..65535|65536|65537) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the policy ID is the index to this table." ::= { tSapIngressEntry 1 } tSapIngressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable " ::= { tSapIngressEntry 2 } tSapIngressScope OBJECT-TYPE SYNTAX TItemScope MAX-ACCESS read-create STATUS current DESCRIPTION "Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'." DEFVAL { template } ::= { tSapIngressEntry 3 } tSapIngressDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "user-provided description of the policy." DEFVAL { ''H } ::= { tSapIngressEntry 4 } tSapIngressDefaultFC OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'." DEFVAL { 'be'H } ::= { tSapIngressEntry 5 } tSapIngressDefaultFCPriority OBJECT-TYPE SYNTAX TPriority MAX-ACCESS read-create STATUS current DESCRIPTION "the priority to assign to traffic ingressing as the default action queue." DEFVAL { low } ::= { tSapIngressEntry 6 } tSapIngressMatchCriteria OBJECT-TYPE SYNTAX TMatchCriteria MAX-ACCESS read-only STATUS current DESCRIPTION "indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created. " ::= { tSapIngressEntry 7 } tSapIngressLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressTable." ::= { tSapIngressEntry 8 } tSapIngressHsmdaPacketOffset OBJECT-TYPE SYNTAX TIngressHsmdaPerPacketOffset UNITS "bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressEntry 9 } tSapIngressDefFCHsmdaCntrOvr OBJECT-TYPE SYNTAX TIngressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressDefFCHsmdaCntrOvr specifies the counter to use for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressEntry 10 } tSapIngressMacCritType OBJECT-TYPE SYNTAX TMacFilterType MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressMacCritType specifies which type of entries this mac filter can contain. If tSapIngressMacCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type vid(3) or isid(2). tSapIngressMacCritType 'isid(2)' is not supported here. If tSapIngressMacCritType is set to vid(3) the only accepted match criteria for the filter entries are: - tSapIngressMacCritInnerTagValue - tSapIngressMacCritInnerTagMask - tSapIngressMacCritOuterTagValue - tSapIngressMacCritOuterTagMask tSapIngressMacCritType can only be changed if the filter has no entries. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded. " DEFVAL { normal } ::= { tSapIngressEntry 11 } tSapIngressPolicyName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressPolicyName specifies the name to associate with this policy." DEFVAL { ''H } ::= { tSapIngressEntry 12 } -- -- sap-ingress policy queue table -- tSapIngressQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all sap-ingress policies' queues." ::= { tSapIngressObjects 2 } tSapIngressQueueEntry OBJECT-TYPE SYNTAX TSapIngressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user." INDEX { tSapIngressIndex, tSapIngressQueue } ::= { tSapIngressQueueTable 1 } TSapIngressQueueEntry ::= SEQUENCE { tSapIngressQueue TIngressQueueId, tSapIngressQueueRowStatus RowStatus, tSapIngressQueueParent TNamedItemOrEmpty, tSapIngressQueueLevel TLevel, tSapIngressQueueWeight TWeight, tSapIngressQueueCIRLevel TLevelOrDefault, tSapIngressQueueCIRWeight TWeight, tSapIngressQueueMCast TruthValue, tSapIngressQueueExpedite INTEGER, tSapIngressQueueCBS TBurstSize, tSapIngressQueueMBS TBurstSize, tSapIngressQueueHiPrioOnly TBurstPercentOrDefault, tSapIngressQueuePIRAdaptation TAdaptationRule, tSapIngressQueueCIRAdaptation TAdaptationRule, tSapIngressQueueAdminPIR TPIRRate, tSapIngressQueueAdminCIR TCIRRate, tSapIngressQueueOperPIR TPIRRate, tSapIngressQueueOperCIR TCIRRate, tSapIngressQueueLastChanged TimeStamp, tSapIngressQueuePoliced TruthValue, tSapIngressQueueMode TQueueMode, tSapIngressQueuePoolName TNamedItemOrEmpty, tSapIngressQueueMBSBytes TBurstSizeBytes, tSapIngressQueueBurstLimit TBurstLimit, tSapIngressQueueAdminPIRPercent Unsigned32, tSapIngressQueueAdminCIRPercent Unsigned32, tSapIngressQueueRateType TBWRateType, tSapIngressQueueAdvCfgPolicy TNamedItemOrEmpty } tSapIngressQueue OBJECT-TYPE SYNTAX TIngressQueueId (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue ID is used as the secondary index to the table entry." ::= { tSapIngressQueueEntry 1 } tSapIngressQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tSapIngressQueueEntry 2 } tSapIngressQueueParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The scheduler to which this queue would be feeding to." DEFVAL { ''H } ::= { tSapIngressQueueEntry 3 } tSapIngressQueueLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding to the parent." DEFVAL { 1 } ::= { tSapIngressQueueEntry 4 } tSapIngressQueueWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used by the scheduler to which this queue would be feeding to." DEFVAL { 1 } ::= { tSapIngressQueueEntry 5 } tSapIngressQueueCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic." DEFVAL { 0 } ::= { tSapIngressQueueEntry 6 } tSapIngressQueueCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to." DEFVAL { 1 } ::= { tSapIngressQueueEntry 7 } tSapIngressQueueMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this is a multicast queue or not." DEFVAL { false } ::= { tSapIngressQueueEntry 8 } tSapIngressQueueExpedite OBJECT-TYPE SYNTAX INTEGER { expedited (1), auto-expedited(2), non-expedited (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter." DEFVAL { auto-expedited } ::= { tSapIngressQueueEntry 9 } tSapIngressQueueCBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of reserved buffer space (in kilo bytes) for the queue." DEFVAL { -1 } ::= { tSapIngressQueueEntry 10 } tSapIngressQueueMBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object." DEFVAL { -1 } ::= { tSapIngressQueueEntry 11 } tSapIngressQueueHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of buffer space for the queue, used exclusively by high priority packets." DEFVAL { -1 } ::= { tSapIngressQueueEntry 12 } tSapIngressQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngressQueueEntry 13 } tSapIngressQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngressQueueEntry 14 } tSapIngressQueueAdminPIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapIngressQueueEntry 15 } tSapIngressQueueAdminCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tSapIngressQueueEntry 16 } tSapIngressQueueOperPIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kbps" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The operating PIR." ::= { tSapIngressQueueEntry 17 } tSapIngressQueueOperCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kbps" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules." ::= { tSapIngressQueueEntry 18 } tSapIngressQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressQueueTable." ::= { tSapIngressQueueEntry 19 } tSapIngressQueuePoliced OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR." DEFVAL { false } ::= { tSapIngressQueueEntry 20 } tSapIngressQueueMode OBJECT-TYPE SYNTAX TQueueMode MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter." DEFVAL { priority } ::= { tSapIngressQueueEntry 21 } tSapIngressQueuePoolName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue." DEFVAL { ''H } ::= { tSapIngressQueueEntry 22 } tSapIngressQueueMBSBytes OBJECT-TYPE SYNTAX TBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum amount of buffer space (in bytes) allowed for the queue." DEFVAL { -1 } ::= { tSapIngressQueueEntry 23 } tSapIngressQueueBurstLimit OBJECT-TYPE SYNTAX TBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue." DEFVAL { -1 } ::= { tSapIngressQueueEntry 24 } tSapIngressQueueAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'." DEFVAL { 10000 } ::= { tSapIngressQueueEntry 25 } tSapIngressQueueAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'." DEFVAL { 0 } ::= { tSapIngressQueueEntry 26 } tSapIngressQueueRateType OBJECT-TYPE SYNTAX TBWRateType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueueAdminCIRPercent and tSapIngressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the ingress queue rates are specified in percentage. The objects tSapIngressQueueAdminCIR and tSapIngressQueueAdminPIR will be set to their default values." DEFVAL { kbps } ::= { tSapIngressQueueEntry 27 } tSapIngressQueueAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue." DEFVAL { ''H } ::= { tSapIngressQueueEntry 28 } -- -- sap-ingress policy dscp table -- tSapIngressDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a list of all DSCP entries for all sap-ingress policies." ::= { tSapIngressObjects 3 } tSapIngressDSCPEntry OBJECT-TYPE SYNTAX TSapIngressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP). " INDEX { tSapIngressIndex, tSapIngressDSCP } ::= { tSapIngressDSCPTable 1 } TSapIngressDSCPEntry ::= SEQUENCE { tSapIngressDSCP TDSCPName, tSapIngressDSCPRowStatus RowStatus, tSapIngressDSCPFC TNamedItemOrEmpty, tSapIngressDSCPPriority TPriorityOrDefault, tSapIngressDSCPLastChanged TimeStamp, tSapIngressDSCPHsmdaCntrOvr TIngressHsmdaCounterIdOrZero } tSapIngressDSCP OBJECT-TYPE SYNTAX TDSCPName MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tSapIngressDSCPEntry 1 } tSapIngressDSCPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows creation/deletion of rows in this table." ::= { tSapIngressDSCPEntry 2 } tSapIngressDSCPFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapIngressDSCPEntry 3 } tSapIngressDSCPPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { default } ::= { tSapIngressDSCPEntry 4 } tSapIngressDSCPLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressDSCPTable." ::= { tSapIngressDSCPEntry 5 } tSapIngressDSCPHsmdaCntrOvr OBJECT-TYPE SYNTAX TIngressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressDSCPEntry 6 } -- -- sap-ingress policy dot1p table -- tSapIngressDot1pTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressDot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a list of all dot1p entries for all sap-ingress policies." ::= { tSapIngressObjects 4 } tSapIngressDot1pEntry OBJECT-TYPE SYNTAX TSapIngressDot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tSapIngressIndex, tSapIngressDot1pValue } ::= { tSapIngressDot1pTable 1 } TSapIngressDot1pEntry ::= SEQUENCE { tSapIngressDot1pValue Dot1PPriority, tSapIngressDot1pRowStatus RowStatus, tSapIngressDot1pFC TNamedItemOrEmpty, tSapIngressDot1pPriority TPriorityOrDefault, tSapIngressDot1pLastChanged TimeStamp, tSapIngressDot1pHsmdaCntrOvr TIngressHsmdaCounterIdOrZero } tSapIngressDot1pValue OBJECT-TYPE SYNTAX Dot1PPriority (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority. " ::= { tSapIngressDot1pEntry 1 } tSapIngressDot1pRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this sap-ingress policy's dot1p entry." ::= { tSapIngressDot1pEntry 2 } tSapIngressDot1pFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapIngressDot1pEntry 3 } tSapIngressDot1pPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "priority to use for packets that match the dot1p value tSapIngressDot1pValue." DEFVAL { default } ::= { tSapIngressDot1pEntry 4 } tSapIngressDot1pLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressDot1pTable." ::= { tSapIngressDot1pEntry 5 } tSapIngressDot1pHsmdaCntrOvr OBJECT-TYPE SYNTAX TIngressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressDot1pEntry 6 } -- -- sap-ingress policy ip criteria table -- tSapIngressIPCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressIPCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all sap-ingress policies' ip-criteria entries." ::= { tSapIngressObjects 5 } tSapIngressIPCriteriaEntry OBJECT-TYPE SYNTAX TSapIngressIPCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tSapIngressIndex, tSapIngressIPCriteriaIndex } ::= { tSapIngressIPCriteriaTable 1 } TSapIngressIPCriteriaEntry ::= SEQUENCE { tSapIngressIPCriteriaIndex TEntryId, tSapIngressIPCriteriaRowStatus RowStatus, tSapIngressIPCriteriaDescription TItemDescription, tSapIngressIPCriteriaActionFC TNamedItemOrEmpty, tSapIngressIPCriteriaActionPriority TPriorityOrDefault, tSapIngressIPCriteriaSourceIpAddr IpAddress, tSapIngressIPCriteriaSourceIpMask IpAddressPrefixLength, tSapIngressIPCriteriaDestIpAddr IpAddress, tSapIngressIPCriteriaDestIpMask IpAddressPrefixLength, tSapIngressIPCriteriaProtocol TIpProtocol, tSapIngressIPCriteriaSourcePortValue1 TTcpUdpPort, tSapIngressIPCriteriaSourcePortValue2 TTcpUdpPort, tSapIngressIPCriteriaSourcePortOperator TTcpUdpPortOperator, tSapIngressIPCriteriaDestPortValue1 TTcpUdpPort, tSapIngressIPCriteriaDestPortValue2 TTcpUdpPort, tSapIngressIPCriteriaDestPortOperator TTcpUdpPortOperator, tSapIngressIPCriteriaDSCP TDSCPNameOrEmpty, tSapIngressIPCriteriaFragment TItemMatch, tSapIngressIPCriteriaLastChanged TimeStamp, tSapIngressIPCritHsmdaCntrOvr TIngressHsmdaCounterIdOrZero, tSapIngressIPCriteriaIpPrecValue Dot1PPriority, tSapIngressIPCriteriaIpPrecMask Dot1PPriority } tSapIngressIPCriteriaIndex OBJECT-TYPE SYNTAX TEntryId MAX-ACCESS not-accessible STATUS current DESCRIPTION "unique identifier separates this entry from others in this policy." ::= { tSapIngressIPCriteriaEntry 1 } tSapIngressIPCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for the IP Criteria entry." ::= { tSapIngressIPCriteriaEntry 2 } tSapIngressIPCriteriaDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "description of this IP criteria entry." DEFVAL { ''H } ::= { tSapIngressIPCriteriaEntry 3 } tSapIngressIPCriteriaActionFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapIngressIPCriteriaEntry 4 } tSapIngressIPCriteriaActionPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet." DEFVAL { default } ::= { tSapIngressIPCriteriaEntry 5 } tSapIngressIPCriteriaSourceIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address to match with source-IP of the packet." DEFVAL { '00000000'H } ::= { tSapIngressIPCriteriaEntry 6 } tSapIngressIPCriteriaSourceIpMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "the prefix is the number of bits of the source IP address to match." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 7 } tSapIngressIPCriteriaDestIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address to match with destination-IP of the packet." DEFVAL { '00000000'H } ::= { tSapIngressIPCriteriaEntry 8 } tSapIngressIPCriteriaDestIpMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "the prefix is the number of bits of the destination IP address to match." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 9 } tSapIngressIPCriteriaProtocol OBJECT-TYPE SYNTAX TIpProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "IP protocol to match. use -1 to disable matching by IP protocol." DEFVAL { -1 } ::= { tSapIngressIPCriteriaEntry 10 } tSapIngressIPCriteriaSourcePortValue1 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 11 } tSapIngressIPCriteriaSourcePortValue2 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 12 } tSapIngressIPCriteriaSourcePortOperator OBJECT-TYPE SYNTAX TTcpUdpPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator." DEFVAL { none } ::= { tSapIngressIPCriteriaEntry 13 } tSapIngressIPCriteriaDestPortValue1 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 14 } tSapIngressIPCriteriaDestPortValue2 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 15 } tSapIngressIPCriteriaDestPortOperator OBJECT-TYPE SYNTAX TTcpUdpPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator." DEFVAL { none } ::= { tSapIngressIPCriteriaEntry 16 } tSapIngressIPCriteriaDSCP OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "DSCP value to match in the packet" DEFVAL { ''H } ::= { tSapIngressIPCriteriaEntry 17 } tSapIngressIPCriteriaFragment OBJECT-TYPE SYNTAX TItemMatch MAX-ACCESS read-create STATUS current DESCRIPTION "matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off)." DEFVAL { off } ::= { tSapIngressIPCriteriaEntry 19 } tSapIngressIPCriteriaLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressIPCriteriaTable." ::= { tSapIngressIPCriteriaEntry 20 } tSapIngressIPCritHsmdaCntrOvr OBJECT-TYPE SYNTAX TIngressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 21 } tSapIngressIPCriteriaIpPrecValue OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { -1 } ::= { tSapIngressIPCriteriaEntry 31 } tSapIngressIPCriteriaIpPrecMask OBJECT-TYPE SYNTAX Dot1PPriority (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { 0 } ::= { tSapIngressIPCriteriaEntry 32 } -- -- sap-ingress policy mac criteria table -- tSapIngressMacCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressMacCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all sap-ingress policies' mac-criteria entries." ::= { tSapIngressObjects 6 } tSapIngressMacCriteriaEntry OBJECT-TYPE SYNTAX TSapIngressMacCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tSapIngressIndex, tSapIngressMacCriteriaIndex } ::= { tSapIngressMacCriteriaTable 1 } TSapIngressMacCriteriaEntry ::= SEQUENCE { tSapIngressMacCriteriaIndex TEntryId, tSapIngressMacCriteriaRowStatus RowStatus, tSapIngressMacCriteriaDescription TItemDescription, tSapIngressMacCriteriaActionFC TNamedItemOrEmpty, tSapIngressMacCriteriaActionPriority TPriorityOrDefault, tSapIngressMacCriteriaFrameType TFrameType, tSapIngressMacCriteriaSrcMacAddr MacAddress, tSapIngressMacCriteriaSrcMacMask MacAddress, tSapIngressMacCriteriaDstMacAddr MacAddress, tSapIngressMacCriteriaDstMacMask MacAddress, tSapIngressMacCriteriaDot1PValue Dot1PPriority, tSapIngressMacCriteriaDot1PMask Dot1PPriority, tSapIngressMacCriteriaEthernetType Integer32, tSapIngressMacCriteriaDSAP ServiceAccessPoint, tSapIngressMacCriteriaDSAPMask ServiceAccessPoint, tSapIngressMacCriteriaSSAP ServiceAccessPoint, tSapIngressMacCriteriaSSAPMask ServiceAccessPoint, tSapIngressMacCriteriaSnapPid Integer32, tSapIngressMacCriteriaSnapOui INTEGER, tSapIngressMacCriteriaLastChanged TimeStamp, tSapIngressMacCriteriaAtmVci AtmVcIdentifier, tSapIngressMacCritInnerTagValue QTagFullRangeOrNone, tSapIngressMacCritInnerTagMask QTagFullRange, tSapIngressMacCritOuterTagValue QTagFullRangeOrNone, tSapIngressMacCritOuterTagMask QTagFullRange } tSapIngressMacCriteriaIndex OBJECT-TYPE SYNTAX TEntryId MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tSapIngressMacCriteriaEntry 1 } tSapIngressMacCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { tSapIngressMacCriteriaEntry 2 } tSapIngressMacCriteriaDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { ''H } ::= { tSapIngressMacCriteriaEntry 3 } tSapIngressMacCriteriaActionFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes." ::= { tSapIngressMacCriteriaEntry 4 } tSapIngressMacCriteriaActionPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { default } ::= { tSapIngressMacCriteriaEntry 5 } tSapIngressMacCriteriaFrameType OBJECT-TYPE SYNTAX TFrameType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of mac frame for which we are defining this match criteria." DEFVAL { e802dot3 } ::= { tSapIngressMacCriteriaEntry 6 } tSapIngressMacCriteriaSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { '000000000000'H } ::= { tSapIngressMacCriteriaEntry 8 } tSapIngressMacCriteriaSrcMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { '000000000000'H } ::= { tSapIngressMacCriteriaEntry 9 } tSapIngressMacCriteriaDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { '000000000000'H } ::= { tSapIngressMacCriteriaEntry 10 } tSapIngressMacCriteriaDstMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { '000000000000'H } ::= { tSapIngressMacCriteriaEntry 11 } tSapIngressMacCriteriaDot1PValue OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 12 } tSapIngressMacCriteriaDot1PMask OBJECT-TYPE SYNTAX Dot1PPriority (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { 0 } ::= { tSapIngressMacCriteriaEntry 13 } tSapIngressMacCriteriaEthernetType OBJECT-TYPE SYNTAX Integer32 (-1 | 1536..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 14 } tSapIngressMacCriteriaDSAP OBJECT-TYPE SYNTAX ServiceAccessPoint MAX-ACCESS read-create STATUS current DESCRIPTION "the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 15 } tSapIngressMacCriteriaDSAPMask OBJECT-TYPE SYNTAX ServiceAccessPoint MAX-ACCESS read-create STATUS current DESCRIPTION "the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 16 } tSapIngressMacCriteriaSSAP OBJECT-TYPE SYNTAX ServiceAccessPoint MAX-ACCESS read-create STATUS current DESCRIPTION "the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 17 } tSapIngressMacCriteriaSSAPMask OBJECT-TYPE SYNTAX ServiceAccessPoint MAX-ACCESS read-create STATUS current DESCRIPTION "the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 18 } tSapIngressMacCriteriaSnapPid OBJECT-TYPE SYNTAX Integer32 (-1 | 0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 19 } tSapIngressMacCriteriaSnapOui OBJECT-TYPE SYNTAX INTEGER { off(1), zero(2), nonZero(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "whether to match snap-oui, and what to match." DEFVAL { off } ::= { tSapIngressMacCriteriaEntry 20 } tSapIngressMacCriteriaLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressMacCriteriaTable." ::= { tSapIngressMacCriteriaEntry 21 } tSapIngressMacCriteriaAtmVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tSapIngressMacCriteriaFrameType is not set to 'atm'." DEFVAL { 0 } ::= { tSapIngressMacCriteriaEntry 22 } tSapIngressMacCritInnerTagValue OBJECT-TYPE SYNTAX QTagFullRangeOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no VLAN tag matching will be performed." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 23 } tSapIngressMacCritInnerTagMask OBJECT-TYPE SYNTAX QTagFullRange (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'." DEFVAL { 4095 } -- 0xFFF : all ones mask. ::= { tSapIngressMacCriteriaEntry 24 } tSapIngressMacCritOuterTagValue OBJECT-TYPE SYNTAX QTagFullRangeOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed." DEFVAL { -1 } ::= { tSapIngressMacCriteriaEntry 25 } tSapIngressMacCritOuterTagMask OBJECT-TYPE SYNTAX QTagFullRange (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'." DEFVAL { 4095 } -- 0xFFF : all ones mask. ::= { tSapIngressMacCriteriaEntry 26 } -- -- sap-ingress policy fc table -- tSapIngressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular forwarding class traffic into the specified queue." ::= { tSapIngressObjects 7 } tSapIngressFCEntry OBJECT-TYPE SYNTAX TSapIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX { tSapIngressIndex, tSapIngressFCName } ::= { tSapIngressFCTable 1 } TSapIngressFCEntry ::= SEQUENCE { tSapIngressFCName TNamedItem, tSapIngressFCRowStatus RowStatus, tSapIngressFCQueue TIngressQueueId, tSapIngressFCMCastQueue TIngressQueueId, tSapIngressFCBCastQueue TIngressQueueId, tSapIngressFCUnknownQueue TIngressQueueId, tSapIngressFCLastChanged TimeStamp, tSapIngressFCInProfRemark TRemarkType, tSapIngressFCInProfDscp TNamedItemOrEmpty, tSapIngressFCInProfPrec TPrecValueOrNone, tSapIngressFCOutProfRemark TRemarkType, tSapIngressFCOutProfDscp TNamedItemOrEmpty, tSapIngressFCOutProfPrec TPrecValueOrNone, tSapIngressFCProfile TProfileOrNone, tSapIngressFCHsmdaQueue TIngressHsmdaQueueId, tSapIngressFCHsmdaMCastQueue TIngressHsmdaQueueId, tSapIngressFCHsmdaBCastQueue TIngressHsmdaQueueId, tSapIngressFCDE1OutOfProfile TruthValue, tSapIngressFCQGrp TNamedItemOrEmpty, tSapIngressFCQGrpMCast TNamedItemOrEmpty, tSapIngressFCQGrpBCast TNamedItemOrEmpty, tSapIngressFCQGrpUnknown TNamedItemOrEmpty, tSapIngressFCPolicer TIngPolicerIdOrNone, tSapIngressFCMCastPolicer TIngPolicerIdOrNone, tSapIngressFCBCastPolicer TIngPolicerIdOrNone, tSapIngressFCUnknownPolicer TIngPolicerIdOrNone, tSapIngressFCPlcrFPQGrp TruthValue, tSapIngressFCMCastPlcrFPQGrp TruthValue, tSapIngressFCBCastPlcrFPQGrp TruthValue, tSapIngressFCUnknownPlcrFPQGrp TruthValue } tSapIngressFCName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes." ::= { tSapIngressFCEntry 1 } tSapIngressFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this queue." ::= { tSapIngressFCEntry 2 } tSapIngressFCQueue OBJECT-TYPE SYNTAX TIngressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used." DEFVAL { 0 } ::= { tSapIngressFCEntry 3 } tSapIngressFCMCastQueue OBJECT-TYPE SYNTAX TIngressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpMCast implies that the default queues should be used." DEFVAL { 0 } ::= { tSapIngressFCEntry 4 } tSapIngressFCBCastQueue OBJECT-TYPE SYNTAX TIngressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpBCast implies that the default queues should be used." DEFVAL { 0 } ::= { tSapIngressFCEntry 5 } tSapIngressFCUnknownQueue OBJECT-TYPE SYNTAX TIngressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpUnknown implies that the default queues should be used." DEFVAL { 0 } ::= { tSapIngressFCEntry 6 } tSapIngressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified." ::= { tSapIngressFCEntry 7 } tSapIngressFCInProfRemark OBJECT-TYPE SYNTAX TRemarkType MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues." DEFVAL { none } ::= { tSapIngressFCEntry 8 } tSapIngressFCInProfDscp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'." DEFVAL { ''H } ::= { tSapIngressFCEntry 9 } tSapIngressFCInProfPrec OBJECT-TYPE SYNTAX TPrecValueOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'." DEFVAL { -1 } ::= { tSapIngressFCEntry 10 } tSapIngressFCOutProfRemark OBJECT-TYPE SYNTAX TRemarkType MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues." DEFVAL { none } ::= { tSapIngressFCEntry 11 } tSapIngressFCOutProfDscp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'." DEFVAL { ''H } ::= { tSapIngressFCEntry 12 } tSapIngressFCOutProfPrec OBJECT-TYPE SYNTAX TPrecValueOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'." DEFVAL { -1 } ::= { tSapIngressFCEntry 13 } tSapIngressFCProfile OBJECT-TYPE SYNTAX TProfileOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'." DEFVAL { none } ::= { tSapIngressFCEntry 14 } tSapIngressFCHsmdaQueue OBJECT-TYPE SYNTAX TIngressHsmdaQueueId MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressFCEntry 15 } tSapIngressFCHsmdaMCastQueue OBJECT-TYPE SYNTAX TIngressHsmdaQueueId MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressFCEntry 16 } tSapIngressFCHsmdaBCastQueue OBJECT-TYPE SYNTAX TIngressHsmdaQueueId MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressFCEntry 17 } tSapIngressFCDE1OutOfProfile OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile." DEFVAL { false } ::= { tSapIngressFCEntry 18 } tSapIngressFCQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCQGrp specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value." DEFVAL { ''H } ::= { tSapIngressFCEntry 19 } tSapIngressFCQGrpMCast OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCMCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value." DEFVAL { ''H } ::= { tSapIngressFCEntry 20 } tSapIngressFCQGrpBCast OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCBCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value." DEFVAL { ''H } ::= { tSapIngressFCEntry 21 } tSapIngressFCQGrpUnknown OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCUnknownQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value." DEFVAL { ''H } ::= { tSapIngressFCEntry 22 } tSapIngressFCPolicer OBJECT-TYPE SYNTAX TIngPolicerIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class." DEFVAL { 0 } ::= { tSapIngressFCEntry 23 } tSapIngressFCMCastPolicer OBJECT-TYPE SYNTAX TIngPolicerIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class." DEFVAL { 0 } ::= { tSapIngressFCEntry 24 } tSapIngressFCBCastPolicer OBJECT-TYPE SYNTAX TIngPolicerIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class." DEFVAL { 0 } ::= { tSapIngressFCEntry 25 } tSapIngressFCUnknownPolicer OBJECT-TYPE SYNTAX TIngPolicerIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class." DEFVAL { 0 } ::= { tSapIngressFCEntry 26 } tSapIngressFCPlcrFPQGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies the FC to use the specific policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP." DEFVAL { false } ::= { tSapIngressFCEntry 27 } tSapIngressFCMCastPlcrFPQGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific multicast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCMCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP." DEFVAL { false } ::= { tSapIngressFCEntry 28 } tSapIngressFCBCastPlcrFPQGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCBCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP." DEFVAL { false } ::= { tSapIngressFCEntry 29 } tSapIngressFCUnknownPlcrFPQGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCUnknownPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP." DEFVAL { false } ::= { tSapIngressFCEntry 30 } -- -- sap-ingress policy precedence table -- tSapIngressPrecTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular precedence value into a forwarding class" ::= { tSapIngressObjects 8 } tSapIngressPrecEntry OBJECT-TYPE SYNTAX TSapIngressPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX { tSapIngressIndex, tSapIngressPrecValue } ::= { tSapIngressPrecTable 1 } TSapIngressPrecEntry ::= SEQUENCE { tSapIngressPrecValue TPrecValue, tSapIngressPrecRowStatus RowStatus, tSapIngressPrecFC TNamedItemOrEmpty, tSapIngressPrecFCPriority TPriorityOrDefault, tSapIngressPrecLastChanged TimeStamp, tSapIngressPrecHsmdaCntrOvr TIngressHsmdaCounterIdOrZero } tSapIngressPrecValue OBJECT-TYPE SYNTAX TPrecValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "Precedence value for which the mapping is done." ::= { tSapIngressPrecEntry 1 } tSapIngressPrecRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this mapping." ::= { tSapIngressPrecEntry 2 } tSapIngressPrecFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapIngressPrecEntry 3 } tSapIngressPrecFCPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The priority to be assigned to the matching traffic." DEFVAL { default } ::= { tSapIngressPrecEntry 4 } tSapIngressPrecLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapIngressPrecTable." ::= { tSapIngressPrecEntry 5 } tSapIngressPrecHsmdaCntrOvr OBJECT-TYPE SYNTAX TIngressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressPrecEntry 6 } -- -- sap-ingress policy ipv6 criteria table -- tSapIngressIPv6CriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressIPv6CriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all sap-ingress policies' ipv6-criteria entries." ::= { tSapIngressObjects 9 } tSapIngressIPv6CriteriaEntry OBJECT-TYPE SYNTAX TSapIngressIPv6CriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tSapIngressIndex, tSapIngressIPv6CriteriaIndex } ::= { tSapIngressIPv6CriteriaTable 1 } TSapIngressIPv6CriteriaEntry ::= SEQUENCE { tSapIngressIPv6CriteriaIndex TEntryId, tSapIngressIPv6CriteriaRowStatus RowStatus, tSapIngressIPv6CriteriaDescription TItemDescription, tSapIngressIPv6CriteriaActionFC TNamedItemOrEmpty, tSapIngressIPv6CriteriaActionPriority TPriorityOrDefault, tSapIngressIPv6CriteriaSourceIpAddr InetAddressIPv6, tSapIngressIPv6CriteriaSourceIpMask InetAddressPrefixLength, tSapIngressIPv6CriteriaDestIpAddr InetAddressIPv6, tSapIngressIPv6CriteriaDestIpMask InetAddressPrefixLength, tSapIngressIPv6CriteriaNextHeader TIpProtocol, tSapIngressIPv6CriteriaSourcePortValue1 TTcpUdpPort, tSapIngressIPv6CriteriaSourcePortValue2 TTcpUdpPort, tSapIngressIPv6CriteriaSourcePortOperator TTcpUdpPortOperator, tSapIngressIPv6CriteriaDestPortValue1 TTcpUdpPort, tSapIngressIPv6CriteriaDestPortValue2 TTcpUdpPort, tSapIngressIPv6CriteriaDestPortOperator TTcpUdpPortOperator, tSapIngressIPv6CriteriaDSCP TDSCPNameOrEmpty, tSapIngressIPv6CriteriaLastChanged TimeStamp, tSapIngressIPv6CriteriaIpPrecValue Dot1PPriority, tSapIngressIPv6CriteriaIpPrecMask Dot1PPriority } tSapIngressIPv6CriteriaIndex OBJECT-TYPE SYNTAX TEntryId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy." ::= { tSapIngressIPv6CriteriaEntry 1 } tSapIngressIPv6CriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry." ::= { tSapIngressIPv6CriteriaEntry 2 } tSapIngressIPv6CriteriaDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry." DEFVAL { ''H } ::= { tSapIngressIPv6CriteriaEntry 3 } tSapIngressIPv6CriteriaActionFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapIngressIPv6CriteriaEntry 4 } tSapIngressIPv6CriteriaActionPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet." DEFVAL { default } ::= { tSapIngressIPv6CriteriaEntry 5 } tSapIngressIPv6CriteriaSourceIpAddr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet." DEFVAL { '00000000000000000000000000000000'H } ::= { tSapIngressIPv6CriteriaEntry 6 } tSapIngressIPv6CriteriaSourceIpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match." DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 7 } tSapIngressIPv6CriteriaDestIpAddr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet." DEFVAL { '00000000000000000000000000000000'H } ::= { tSapIngressIPv6CriteriaEntry 8 } tSapIngressIPv6CriteriaDestIpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match." DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 9 } tSapIngressIPv6CriteriaNextHeader OBJECT-TYPE SYNTAX TIpProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60." DEFVAL { -1 } ::= { tSapIngressIPv6CriteriaEntry 10 } tSapIngressIPv6CriteriaSourcePortValue1 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator." DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 11 } tSapIngressIPv6CriteriaSourcePortValue2 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator." DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 12 } tSapIngressIPv6CriteriaSourcePortOperator OBJECT-TYPE SYNTAX TTcpUdpPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used." DEFVAL { none } ::= { tSapIngressIPv6CriteriaEntry 13 } tSapIngressIPv6CriteriaDestPortValue1 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator." DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 14 } tSapIngressIPv6CriteriaDestPortValue2 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator." DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 15 } tSapIngressIPv6CriteriaDestPortOperator OBJECT-TYPE SYNTAX TTcpUdpPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used." DEFVAL { none } ::= { tSapIngressIPv6CriteriaEntry 16 } tSapIngressIPv6CriteriaDSCP OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet" DEFVAL { ''H } ::= { tSapIngressIPv6CriteriaEntry 17 } tSapIngressIPv6CriteriaLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable." ::= { tSapIngressIPv6CriteriaEntry 20 } tSapIngressIPv6CriteriaIpPrecValue OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { -1 } ::= { tSapIngressIPv6CriteriaEntry 31 } tSapIngressIPv6CriteriaIpPrecMask OBJECT-TYPE SYNTAX Dot1PPriority (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { 0 } ::= { tSapIngressIPv6CriteriaEntry 32 } -- -- sap-ingress hsmda queue table -- tSapIngressHsmdaQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressHsmdaQueueEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about all sap-ingress policies' HSMDA queues. This table is obsoleted in 10.0 release." ::= { tSapIngressObjects 10 } tSapIngressHsmdaQueueEntry OBJECT-TYPE SYNTAX TSapIngressHsmdaQueueEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about a particular HSMDA queue for a sap-ingress policy. Entries are created by user." INDEX { tSapIngressIndex, tSapIngressHsmdaQueue } ::= { tSapIngressHsmdaQueueTable 1} TSapIngressHsmdaQueueEntry ::= SEQUENCE { tSapIngressHsmdaQueue TIngressHsmdaQueueId, tSapIngressHsmdaQueueRowStatus RowStatus, tSapIngressHsmdaQueueLastChanged TimeStamp, tSapIngressHsmdaQueueCIRAdaptn TAdaptationRule, tSapIngressHsmdaQueuePIRAdaptn TAdaptationRule, tSapIngressHsmdaQueueAdminPIR THsmdaPIRKRate, tSapIngressHsmdaQueueAdminCIR THsmdaCIRKRate, tSapIngressHsmdaQueueSlopePolicy TNamedItem, tSapIngressHsmdaQueuePoliced TruthValue } tSapIngressHsmdaQueue OBJECT-TYPE SYNTAX TIngressHsmdaQueueId (1..8) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The HSMDA queue ID is used as the secondary index to the table entry." ::= { tSapIngressHsmdaQueueEntry 1 } tSapIngressHsmdaQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable." ::= { tSapIngressHsmdaQueueEntry 2 } tSapIngressHsmdaQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable." ::= { tSapIngressHsmdaQueueEntry 3 } tSapIngressHsmdaQueueCIRAdaptn OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngressHsmdaQueueEntry 4 } tSapIngressHsmdaQueuePIRAdaptn OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngressHsmdaQueueEntry 5 } tSapIngressHsmdaQueueAdminPIR OBJECT-TYPE SYNTAX THsmdaPIRKRate UNITS "kbps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapIngressHsmdaQueueEntry 6 } tSapIngressHsmdaQueueAdminCIR OBJECT-TYPE SYNTAX THsmdaCIRKRate UNITS "kbps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user." DEFVAL { 0 } ::= { tSapIngressHsmdaQueueEntry 7 } tSapIngressHsmdaQueueSlopePolicy OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user." DEFVAL { "default" } ::= { tSapIngressHsmdaQueueEntry 8 } tSapIngressHsmdaQueuePoliced OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. This policing function is different than the shaping function normally performed by the queues defined rate in that scheduling is not stopped for the queue when the rate is exceeded. Accordingly, tSapIngressHsmdaQueuePoliced overrides the bandwidth specified by the object tSapIngressHsmdaQueueAdminCIR." DEFVAL { false } ::= { tSapIngressHsmdaQueueEntry 9 } -- -- sap-ingress policy LspExp table -- tSapIngressLspExpTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressLspExpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mappings of an Lsp Exp Bit value into a forwarding class" ::= { tSapIngressObjects 11 } tSapIngressLspExpEntry OBJECT-TYPE SYNTAX TSapIngressLspExpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-ingress policy's Lsp Exp Bit values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX { tSapIngressIndex, tSapIngressLspExpValue } ::= { tSapIngressLspExpTable 1 } TSapIngressLspExpEntry ::= SEQUENCE { tSapIngressLspExpValue TLspExpValue, tSapIngressLspExpRowStatus RowStatus, tSapIngressLspExpLastChanged TimeStamp, tSapIngressLspExpFC TNamedItemOrEmpty, tSapIngressLspExpFCPriority TPriorityOrDefault, tSapIngressLspExpHsmdaCntrOvr TIngressHsmdaCounterIdOrZero } tSapIngressLspExpValue OBJECT-TYPE SYNTAX TLspExpValue (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done." ::= { tSapIngressLspExpEntry 1 } tSapIngressLspExpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping." ::= { tSapIngressLspExpEntry 2 } tSapIngressLspExpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable." ::= { tSapIngressLspExpEntry 3 } tSapIngressLspExpFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressLspExpFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapIngressLspExpEntry 4 } tSapIngressLspExpFCPriority OBJECT-TYPE SYNTAX TPriorityOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic." DEFVAL { default } ::= { tSapIngressLspExpEntry 5 } tSapIngressLspExpHsmdaCntrOvr OBJECT-TYPE SYNTAX TIngressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapIngressLspExpEntry 6 } -- ------------------------- -- SAP Ingress Policer table -- ------------------------- tSapIngPolicerTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngPolicerTableLastChanged indicates the timestamp of last change to the tSapIngPolicerTable." ::= { tQosTimeStampObjects 85 } tSapIngPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapIngPolicerTable defines SAP Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tSapIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable." ::= { tSapIngressObjects 12 } tSapIngPolicerEntry OBJECT-TYPE SYNTAX TSapIngPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapIngPolicerRowStatus." INDEX { tSapIngressIndex, tSapIngPolicerId } ::= { tSapIngPolicerTable 1 } TSapIngPolicerEntry ::= SEQUENCE { tSapIngPolicerId TIngPolicerId, tSapIngPolicerRowStatus RowStatus, tSapIngPolicerLastChanged TimeStamp, tSapIngPolicerDescr TItemDescription, tSapIngPolicerPIRAdaptation TAdaptationRule, tSapIngPolicerCIRAdaptation TAdaptationRule, tSapIngPolicerParent TNamedItemOrEmpty, tSapIngPolicerLevel TLevel, tSapIngPolicerWeight TPolicerWeight, tSapIngPolicerAdminPIR THPolPIRRate, tSapIngPolicerAdminCIR THPolCIRRate, tSapIngPolicerStatMode TmnxIngPolicerStatMode, tSapIngPolicerMBS TPlcrBurstSizeBytes, tSapIngPolicerHiPrioOnly TBurstPercentOrDefault, tSapIngPolicerCBS TPlcrBurstSizeBytes, tSapIngPolicerPktOffset TPerPacketOffset, tSapIngPolicerAdminPIRPercent Unsigned32, tSapIngPolicerAdminCIRPercent Unsigned32, tSapIngPolicerRateType TPolicerRateType, tSapIngPolicerSlopeStartDepth Unsigned32, tSapIngPolicerSlopeMaxDepth Unsigned32, tSapIngPolicerSlopeMaxProb Unsigned32, tSapIngPolicerSlopeMap TmnxSlopeMap, tSapIngPolicerAdvCfgPolicy TNamedItemOrEmpty, tSapIngPolicerProfileCapped TruthValue } tSapIngPolicerId OBJECT-TYPE SYNTAX TIngPolicerId MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system." ::= { tSapIngPolicerEntry 1 } tSapIngPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tSapIngPolicerEntry 2 } tSapIngPolicerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified." ::= { tSapIngPolicerEntry 3 } tSapIngPolicerDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerDescr specifies the description of the policer." DEFVAL { ''H } ::= { tSapIngPolicerEntry 4 } tSapIngPolicerPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngPolicerEntry 5 } tSapIngPolicerCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngPolicerEntry 6 } tSapIngPolicerParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerParent specifies the scheduler to which this queue would be feeding." DEFVAL { ''H } ::= { tSapIngPolicerEntry 7 } tSapIngPolicerLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tSapIngPolicerEntry 8 } tSapIngPolicerWeight OBJECT-TYPE SYNTAX TPolicerWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tSapIngPolicerEntry 9 } tSapIngPolicerAdminPIR OBJECT-TYPE SYNTAX THPolPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapIngPolicerEntry 10 } tSapIngPolicerAdminCIR OBJECT-TYPE SYNTAX THPolCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user." DEFVAL { 0 } ::= { tSapIngPolicerEntry 11 } tSapIngPolicerStatMode OBJECT-TYPE SYNTAX TmnxIngPolicerStatMode MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerStatMode specifies the mode of statistics collected by this policer." DEFVAL { minimal } ::= { tSapIngPolicerEntry 12 } tSapIngPolicerMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer." DEFVAL { -1 } ::= { tSapIngPolicerEntry 13 } tSapIngPolicerHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic." DEFVAL { -1 } ::= { tSapIngPolicerEntry 14 } tSapIngPolicerCBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer." DEFVAL { -1 } ::= { tSapIngPolicerEntry 15 } tSapIngPolicerPktOffset OBJECT-TYPE SYNTAX TPerPacketOffset MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer." DEFVAL { 0 } ::= { tSapIngPolicerEntry 16 } tSapIngPolicerAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'." DEFVAL { 10000 } ::= { tSapIngPolicerEntry 17 } tSapIngPolicerAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'." DEFVAL { 0 } ::= { tSapIngPolicerEntry 18 } tSapIngPolicerRateType OBJECT-TYPE SYNTAX TPolicerRateType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerAdminPIRPercent and tSapIngPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the ingress policer rates are specified in percentage. The objects tSapIngPolicerAdminPIR and tSapIngPolicerAdminCIR will be set to their default values." DEFVAL { kbps } ::= { tSapIngPolicerEntry 19 } tSapIngPolicerSlopeStartDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 10000 } ::= { tSapIngPolicerEntry 20 } tSapIngPolicerSlopeMaxDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 10000 } ::= { tSapIngPolicerEntry 21 } tSapIngPolicerSlopeMaxProb OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth up to the tSapIngPolicerSlopeMaxProb at the tSapIngPolicerSlopeMaxDepth." DEFVAL { 10000 } ::= { tSapIngPolicerEntry 22 } tSapIngPolicerSlopeMap OBJECT-TYPE SYNTAX TmnxSlopeMap MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer." DEFVAL { none } ::= { tSapIngPolicerEntry 23 } tSapIngPolicerAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer." DEFVAL { ''H } ::= { tSapIngPolicerEntry 24 } tSapIngPolicerProfileCapped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer." DEFVAL { false } ::= { tSapIngPolicerEntry 25 } -- ---------------------- -- tSapIngPolicyNameTable -- ---------------------- tSapIngPolicyNameTableLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapIngPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapIngPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 95 } tSapIngPolicyNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngPolicyNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP ingress policy name information. Entries are created automatically by the system when tSapIngressPolicyName object is set for the SAP ingress policy." ::= { tSapIngressObjects 13 } tSapIngPolicyNameEntry OBJECT-TYPE SYNTAX TSapIngPolicyNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic information about a specific SAP ingress policy name." INDEX { tSapIngressPolicyName } ::= { tSapIngPolicyNameTable 1 } TSapIngPolicyNameEntry ::= SEQUENCE { tSapIngPolicyNameId TSapIngressPolicyID, tSapIngPolicyNameRowStatus RowStatus, tSapIngPolicyNameLastChanged TimeStamp } tSapIngPolicyNameId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tSapIngPolicyNameId specifies the policy name associated with this SAP ingress policy." ::= { tSapIngPolicyNameEntry 1 } tSapIngPolicyNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This value of the object tSapIngPolicyNameRowStatus specifies the status of this row." ::= { tSapIngPolicyNameEntry 2 } tSapIngPolicyNameLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapIngPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tSapIngPolicyNameEntry 3 } -- -- sap-egress policy table -- tSapEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all sap-egress policies." ::= { tSapEgressObjects 1 } tSapEgressEntry OBJECT-TYPE SYNTAX TSapEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed. " INDEX { tSapEgressIndex } ::= { tSapEgressTable 1 } TSapEgressEntry ::= SEQUENCE { tSapEgressIndex TSapEgressPolicyID, tSapEgressRowStatus RowStatus, tSapEgressScope TItemScope, tSapEgressDescription TItemDescription, tSapEgressLastChanged TimeStamp, tSapEgressHsmdaPacketOffset TEgressHsmdaPerPacketOffset, tSapEgressMatchCriteria TMatchCriteria, tSapEgressHsmdaWrrPolicy TNamedItemOrEmpty, tSapEgressHsmdaLowBrstMaxCls Unsigned32, tSapEgressPolicyName TLNamedItemOrEmpty, tSapEgressEthernetCtag TruthValue } tSapEgressIndex OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS not-accessible STATUS current DESCRIPTION "the sap-egress policy ID is used as index for the table." ::= { tSapEgressEntry 1 } tSapEgressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this policy's entry." ::= { tSapEgressEntry 2 } tSapEgressScope OBJECT-TYPE SYNTAX TItemScope MAX-ACCESS read-create STATUS current DESCRIPTION "scope of the sap-egress policy." DEFVAL { template } ::= { tSapEgressEntry 3 } tSapEgressDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "user-supplied description of this sap-egress policy." DEFVAL { ''H } ::= { tSapEgressEntry 4 } tSapEgressLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapEgressTable." ::= { tSapEgressEntry 5 } tSapEgressHsmdaPacketOffset OBJECT-TYPE SYNTAX TEgressHsmdaPerPacketOffset UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting." DEFVAL { 0 } ::= { tSapEgressEntry 6 } tSapEgressMatchCriteria OBJECT-TYPE SYNTAX TMatchCriteria MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgressMatchCriteria indicates which type of match criteria the policy should use. When tSapEgressMatchCriteria has a value of 'ip', the sap-egress policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. The value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. The value of tSapEgressMatchCriteria is set to 'none' when the last criteria table entry is removed." ::= { tSapEgressEntry 7 } tSapEgressHsmdaWrrPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use." DEFVAL { "" } ::= { tSapEgressEntry 8 } tSapEgressHsmdaLowBrstMaxCls OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. All classes starting from 1, up to and including that specified by tSapEgressHsmdaLowBrstMaxCls use the low priority burst threshold. All classes greater than the value of tSapEgressHsmdaLowBrstMaxCls up to and including class 8 use the high priority burst threshold." DEFVAL { 8 } ::= { tSapEgressEntry 9 } tSapEgressPolicyName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressPolicyName specifies the name to associate with this policy." DEFVAL { ''H } ::= { tSapEgressEntry 10 } tSapEgressEthernetCtag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressEthernetCtag specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy. The value 'true' specifies that the top customer tag will be used for egress reclassification based on dot1p criteria. The value 'false' specifies that a service delimiting tag will be used for egress reclassification based on dot1p criteria." DEFVAL { false } ::= { tSapEgressEntry 11 } -- -- sap-egress policy queue table -- tSapEgressQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all sap-egress policies' queues." ::= { tSapEgressObjects 2 } tSapEgressQueueEntry OBJECT-TYPE SYNTAX TSapEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tSapEgressIndex, tSapEgressQueueIndex } ::= { tSapEgressQueueTable 1 } TSapEgressQueueEntry ::= SEQUENCE { tSapEgressQueueIndex TEgressQueueId, tSapEgressQueueRowStatus RowStatus, tSapEgressQueueParent TNamedItemOrEmpty, tSapEgressQueueLevel TLevel, tSapEgressQueueWeight TWeight, tSapEgressQueueCIRLevel TLevelOrDefault, tSapEgressQueueCIRWeight TWeight, tSapEgressQueueExpedite INTEGER, tSapEgressQueueCBS TBurstSize, tSapEgressQueueMBS TBurstSize, tSapEgressQueueHiPrioOnly TBurstPercentOrDefault, tSapEgressQueuePIRAdaptation TAdaptationRule, tSapEgressQueueCIRAdaptation TAdaptationRule, tSapEgressQueueAdminPIR TPIRRate, tSapEgressQueueAdminCIR TCIRRate, tSapEgressQueueOperPIR TPIRRate, tSapEgressQueueOperCIR TCIRRate, tSapEgressQueueLastChanged TimeStamp, tSapEgressQueueUsePortParent TruthValue, tSapEgressQueuePortLvl TLevel, tSapEgressQueuePortWght TWeight, tSapEgressQueuePortCIRLvl TLevelOrDefault, tSapEgressQueuePortCIRWght TWeight, tSapEgressQueuePortAvgOverhead Unsigned32, tSapEgressQueuePoolName TNamedItemOrEmpty, tSapEgressQueueXPWredQ TruthValue, tSapEgressQueueXPWredQSlope TNamedItem, tSapEgressQueueMBSBytes TBurstSizeBytes, tSapEgressQueueBurstLimit TBurstLimit, tSapEgressQueuePktOffset TEgressQPerPacketOffset, tSapEgressQueueAdminPIRPercent Unsigned32, tSapEgressQueueAdminCIRPercent Unsigned32, tSapEgressQueueRateType TBWRateType, tSapEgressQueueAdvCfgPolicy TNamedItemOrEmpty } tSapEgressQueueIndex OBJECT-TYPE SYNTAX TEgressQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted." ::= { tSapEgressQueueEntry 1 } tSapEgressQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tSapEgressQueueEntry 2 } tSapEgressQueueParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The scheduler to which this queue would be feeding to." DEFVAL { ''H } ::= { tSapEgressQueueEntry 3 } tSapEgressQueueLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding to the parent." DEFVAL { 1 } ::= { tSapEgressQueueEntry 4 } tSapEgressQueueWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used by the scheduler to which this queue would be feeding to." DEFVAL { 1 } ::= { tSapEgressQueueEntry 5 } tSapEgressQueueCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic." DEFVAL { 0 } ::= { tSapEgressQueueEntry 6 } tSapEgressQueueCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to." DEFVAL { 1 } ::= { tSapEgressQueueEntry 7 } tSapEgressQueueExpedite OBJECT-TYPE SYNTAX INTEGER { expedited (1), auto-expedited(2), non-expedited (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter." DEFVAL { auto-expedited } ::= { tSapEgressQueueEntry 8 } tSapEgressQueueCBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of reserved buffer space (in kilo bytes) for the queue." DEFVAL { -1 } ::= { tSapEgressQueueEntry 9 } tSapEgressQueueMBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapEgressQueueMBSBytes object." DEFVAL { -1 } ::= { tSapEgressQueueEntry 10 } tSapEgressQueueHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of buffer space for the queue, used exclusively by high priority packets." DEFVAL { -1 } ::= { tSapEgressQueueEntry 11 } tSapEgressQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapEgressQueueEntry 12 } tSapEgressQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapEgressQueueEntry 13 } tSapEgressQueueAdminPIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapEgressQueueEntry 14 } tSapEgressQueueAdminCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tSapEgressQueueEntry 15 } tSapEgressQueueOperPIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kbps" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The administrative PIR specified by the user." ::= { tSapEgressQueueEntry 16 } tSapEgressQueueOperCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kbps" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules." ::= { tSapEgressQueueEntry 17 } tSapEgressQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapEgressQueueTable." ::= { tSapEgressQueueEntry 18 } tSapEgressQueueUsePortParent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed." DEFVAL { false } ::= { tSapEgressQueueEntry 19 } tSapEgressQueuePortLvl OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tSapEgressQueueEntry 20 } tSapEgressQueuePortWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tSapEgressQueueEntry 21 } tSapEgressQueuePortCIRLvl OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tSapEgressQueueEntry 22 } tSapEgressQueuePortCIRWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tSapEgressQueueEntry 23 } tSapEgressQueuePortAvgOverhead OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "Hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa." DEFVAL { 0 } ::= { tSapEgressQueueEntry 24 } tSapEgressQueuePoolName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue." DEFVAL { ''H } ::= { tSapEgressQueueEntry 25 } tSapEgressQueueXPWredQ OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning." DEFVAL { false } ::= { tSapEgressQueueEntry 26 } tSapEgressQueueXPWredQSlope OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueueXPWredQSlope specifies the name of the slope-policy to be applied for SAP egress queue. An 'inconsistentValue' error is returned when this object is set to a non-default value when tSapEgressQueueXPWredQ is set to 'false'." DEFVAL { "default" } ::= { tSapEgressQueueEntry 27 } tSapEgressQueueMBSBytes OBJECT-TYPE SYNTAX TBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum amount of buffer space (in bytes) allowed for the queue." DEFVAL { -1 } ::= { tSapEgressQueueEntry 28 } tSapEgressQueueBurstLimit OBJECT-TYPE SYNTAX TBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue." DEFVAL { -1 } ::= { tSapEgressQueueEntry 29 } tSapEgressQueuePktOffset OBJECT-TYPE SYNTAX TEgressQPerPacketOffset UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueuePktOffset specifies the per packet byte offset for this queue." DEFVAL { 0 } ::= { tSapEgressQueueEntry 30 } tSapEgressQueueAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminPIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'." DEFVAL { 10000 } ::= { tSapEgressQueueEntry 31 } tSapEgressQueueAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminCIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'." DEFVAL { 0 } ::= { tSapEgressQueueEntry 32 } tSapEgressQueueRateType OBJECT-TYPE SYNTAX TBWRateType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueueRateType specifies the type of Egress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapEgressQueueAdminCIRPercent and tSapEgressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the egress queue rates are specified in percentage. The objects tSapEgressQueueAdminCIR and tSapEgressQueueAdminPIR will be set to their default values." DEFVAL { kbps } ::= { tSapEgressQueueEntry 33 } tSapEgressQueueAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue." DEFVAL { ''H } ::= { tSapEgressQueueEntry 34 } -- -- sap-egress policy fc table -- tSapEgressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tSapEgressObjects 3 } tSapEgressFCEntry OBJECT-TYPE SYNTAX TSapEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tSapEgressIndex, tSapEgressFCName } ::= { tSapEgressFCTable 1 } TSapEgressFCEntry ::= SEQUENCE { tSapEgressFCName TFCName, tSapEgressFCRowStatus RowStatus, tSapEgressFCQueue TEgressQueueId, tSapEgressFCDot1PValue Dot1PPriority, tSapEgressFCLastChanged TimeStamp, tSapEgressFCHsmdaQueue TEgressHsmdaQueueId, tSapEgressFCDot1PHsmdaProfile TruthValue, tSapEgressFCDot1PInProfile Dot1PPriority, tSapEgressFCDot1POutProfile Dot1PPriority, tSapEgressFCForceDEValue TDEValue, tSapEgressFCDEMark TruthValue, tSapEgressFCInProfDscp TNamedItemOrEmpty, tSapEgressFCOutProfDscp TNamedItemOrEmpty, tSapEgressFCInProfPrec TPrecValueOrNone, tSapEgressFCOutProfPrec TPrecValueOrNone, tSapEgressFCQGrp TNamedItemOrEmpty, tSapEgressFCPolicer TEgrPolicerIdOrNone, tSapEgressFCQGrpFC TFCNameOrEmpty } tSapEgressFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "forwarding class name." ::= { tSapEgressFCEntry 1 } tSapEgressFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this queue." ::= { tSapEgressFCEntry 2 } tSapEgressFCQueue OBJECT-TYPE SYNTAX TEgressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The queue to use for packets in this forwarding class. When tSapEgressFCQGrp is set to its default value, tSapEgressFCQueue represents the local queue to which traffic will be forwarded. When tSapEgressFCQGrp is set to a non-default value, tSapEgressFCQueue represents the queue within the specified queue-group to which traffic will be forwarded." DEFVAL { 0 } ::= { tSapEgressFCEntry 3 } tSapEgressFCDot1PValue OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects." DEFVAL { -1 } ::= { tSapEgressFCEntry 4 } tSapEgressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSapEgressFCTable." ::= { tSapEgressFCEntry 5 } tSapEgressFCHsmdaQueue OBJECT-TYPE SYNTAX TEgressHsmdaQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA." DEFVAL { 0 } ::= { tSapEgressFCEntry 6 } tSapEgressFCDot1PHsmdaProfile OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object tSapEgressFCDot1PHsmdaProfile specifies if the system will perform egress profiling on HSMDA queues or not. The tSapEgressFCDot1PHsmdaProfile object is obsoleted in 9.0 Release." DEFVAL { false } ::= { tSapEgressFCEntry 7 } tSapEgressFCDot1PInProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'." DEFVAL { -1 } ::= { tSapEgressFCEntry 8 } tSapEgressFCDot1POutProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'." DEFVAL { -1 } ::= { tSapEgressFCEntry 9 } tSapEgressFCForceDEValue OBJECT-TYPE SYNTAX TDEValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'." DEFVAL { -1 } ::= { tSapEgressFCEntry 10 } tSapEgressFCDEMark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'." DEFVAL { false } ::= { tSapEgressFCEntry 11 } tSapEgressFCInProfDscp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values." DEFVAL { ''H } ::= { tSapEgressFCEntry 12 } tSapEgressFCOutProfDscp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values." DEFVAL { ''H } ::= { tSapEgressFCEntry 13 } tSapEgressFCInProfPrec OBJECT-TYPE SYNTAX TPrecValueOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values." DEFVAL { -1 } ::= { tSapEgressFCEntry 14 } tSapEgressFCOutProfPrec OBJECT-TYPE SYNTAX TPrecValueOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values." DEFVAL { -1 } ::= { tSapEgressFCEntry 15 } tSapEgressFCQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCQGrp specifies the tQosEgrQGroupName. When set to a non-default value, this indicates the name of the queue-group to which traffic will be forwarded." DEFVAL { ''H } ::= { tSapEgressFCEntry 16 } tSapEgressFCPolicer OBJECT-TYPE SYNTAX TEgrPolicerIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCPolicer specifies the SAP Egress Policer identifier. If a corresponding Sap Egress Policer Id does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error will be returned. When tSapEgressFCPolicer is set to its default value, then traffic for this forwarding class will not use policers. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to default, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a system determined queue-group queue. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a queue within the given queue-group according to the appropriate tQosEgrQGroupFCEntry. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given queue within the given queue-group. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set its default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given local queue." DEFVAL { 0 } ::= { tSapEgressFCEntry 17 } tSapEgressFCQGrpFC OBJECT-TYPE SYNTAX TFCNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressFCQGrpFC, when specified, will replace the forwarding class derived from ingress as the forwarding class to use inside the egress queue group. tSapEgressFCQGrpFC is only allowed to be used in conjunction with egress policers, and is mutually exclusive with direct queue-group queue mappings. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC is set to a non-default value when tSapEgressFCPolicer is set to default." DEFVAL { ''H } ::= { tSapEgressFCEntry 18 } -- -- sap-egress hsmda queue table -- tSapEgressHsmdaQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressHsmdaQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all sap-egress policies' HSMDA queues." ::= { tSapEgressObjects 4 } tSapEgressHsmdaQueueEntry OBJECT-TYPE SYNTAX TSapEgressHsmdaQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular HSMDA queue for a sap-egress policy. Entries are created by user." INDEX { tSapEgressIndex, tSapEgressHsmdaQueue } ::= { tSapEgressHsmdaQueueTable 1} TSapEgressHsmdaQueueEntry ::= SEQUENCE { tSapEgressHsmdaQueue TEgressHsmdaQueueId, tSapEgressHsmdaQueueRowStatus RowStatus, tSapEgressHsmdaQueueCIRAdaptn TAdaptationRule, tSapEgressHsmdaQueuePIRAdaptn TAdaptationRule, tSapEgressHsmdaQueueAdminPIR THsmdaPIRKRate, tSapEgressHsmdaQueueAdminCIR THsmdaCIRKRate, tSapEgressHsmdaQueueSlopePolicy TNamedItem, tSapEgressHsmdaQueueLastChanged TimeStamp, tSapEgressHsmdaQueueWrrWeight THsmdaWrrWeight, tSapEgressHsmdaQueueMBS THSMDABurstSizeBytes, tSapEgressHsmdaQueueBurstLimit THSMDAQueueBurstLimit } tSapEgressHsmdaQueue OBJECT-TYPE SYNTAX TEgressHsmdaQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HSMDA queue ID is used as the secondary index to the table entry." ::= { tSapEgressHsmdaQueueEntry 1 } tSapEgressHsmdaQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapEgressHsmdaQueueTable." ::= { tSapEgressHsmdaQueueEntry 2 } tSapEgressHsmdaQueueCIRAdaptn OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapEgressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. This object is obsoleted in 10.0 Release." DEFVAL { closest } ::= { tSapEgressHsmdaQueueEntry 3 } tSapEgressHsmdaQueuePIRAdaptn OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapEgressHsmdaQueueEntry 4 } tSapEgressHsmdaQueueAdminPIR OBJECT-TYPE SYNTAX THsmdaPIRKRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapEgressHsmdaQueueEntry 5 } tSapEgressHsmdaQueueAdminCIR OBJECT-TYPE SYNTAX THsmdaCIRKRate UNITS "kbps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tSapEgressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 10.0 Release." DEFVAL { 0 } ::= { tSapEgressHsmdaQueueEntry 6 } tSapEgressHsmdaQueueSlopePolicy OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueSlopePolicy specifies the slope policy specified by the user." DEFVAL { "default" } ::= { tSapEgressHsmdaQueueEntry 7 } tSapEgressHsmdaQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapEgressHsmdaQueueTable." ::= { tSapEgressHsmdaQueueEntry 8 } tSapEgressHsmdaQueueWrrWeight OBJECT-TYPE SYNTAX THsmdaWrrWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class." DEFVAL { 1 } ::= { tSapEgressHsmdaQueueEntry 9 } tSapEgressHsmdaQueueMBS OBJECT-TYPE SYNTAX THSMDABurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue." DEFVAL { -1 } ::= { tSapEgressHsmdaQueueEntry 10 } tSapEgressHsmdaQueueBurstLimit OBJECT-TYPE SYNTAX THSMDAQueueBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue." DEFVAL { -1 } ::= { tSapEgressHsmdaQueueEntry 11 } -- -- sap-egress policy dscp table -- tSapEgressDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a list of all DSCP entries for all sap-egress policies." ::= { tSapEgressObjects 5 } tSapEgressDSCPEntry OBJECT-TYPE SYNTAX TSapEgressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular DSCP entry for a sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapEgressDSCP). " INDEX { tSapEgressIndex, tSapEgressDSCP } ::= { tSapEgressDSCPTable 1 } TSapEgressDSCPEntry ::= SEQUENCE { tSapEgressDSCP TDSCPName, tSapEgressDSCPRowStatus RowStatus, tSapEgressDSCPLastChanged TimeStamp, tSapEgressDSCPHsmdaCntrOverride TEgressHsmdaCounterIdOrZero, tSapEgressDSCPfc TFCNameOrEmpty, tSapEgressDSCPprofile TProfileOrNone } tSapEgressDSCP OBJECT-TYPE SYNTAX TDSCPName MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tSapEgressDSCPEntry 1 } tSapEgressDSCPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressDSCPRowStatus controls the creation/deletion of rows in this table." ::= { tSapEgressDSCPEntry 2 } tSapEgressDSCPLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tSapEgressDSCPEntry 3 } tSapEgressDSCPHsmdaCntrOverride OBJECT-TYPE SYNTAX TEgressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgressDSCPHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapEgressDSCP. A value of zero implies that the default counters should be used." DEFVAL { 0 } ::= { tSapEgressDSCPEntry 4 } tSapEgressDSCPfc OBJECT-TYPE SYNTAX TFCNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressDSCPfc, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions." DEFVAL { ''H } ::= { tSapEgressDSCPEntry 5 } tSapEgressDSCPprofile OBJECT-TYPE SYNTAX TProfileOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressDSCPprofile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior." DEFVAL { none } ::= { tSapEgressDSCPEntry 6 } -- -- sap-egress policy precedence table -- tSapEgressPrecTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular precedence value into a forwarding class" ::= { tSapEgressObjects 6 } tSapEgressPrecEntry OBJECT-TYPE SYNTAX TSapEgressPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX { tSapEgressIndex, tSapEgressPrecValue } ::= { tSapEgressPrecTable 1 } TSapEgressPrecEntry ::= SEQUENCE { tSapEgressPrecValue TPrecValue, tSapEgressPrecRowStatus RowStatus, tSapEgressPrecLastChanged TimeStamp, tSapEgressPrecHsmdaCntrOverride TEgressHsmdaCounterIdOrZero, tSapEgressPrecFC TFCNameOrEmpty, tSapEgressPrecProfile TProfileOrNone } tSapEgressPrecValue OBJECT-TYPE SYNTAX TPrecValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tSapEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tSapEgressPrecTable." ::= { tSapEgressPrecEntry 1 } tSapEgressPrecRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressPrecRowStatus controls the creation/deletion of rows in this table." ::= { tSapEgressPrecEntry 2 } tSapEgressPrecLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tSapEgressPrecEntry 3 } tSapEgressPrecHsmdaCntrOverride OBJECT-TYPE SYNTAX TEgressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressPrecHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapEgressPrecValue. A value of zero implies that the default counters should be used." DEFVAL { 0 } ::= { tSapEgressPrecEntry 4 } tSapEgressPrecFC OBJECT-TYPE SYNTAX TFCNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressPrecFC, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions." DEFVAL { ''H } ::= { tSapEgressPrecEntry 5 } tSapEgressPrecProfile OBJECT-TYPE SYNTAX TProfileOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressPrecProfile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior." DEFVAL { none } ::= { tSapEgressPrecEntry 6 } -- -- sap-egress ip-crit table -- tSapEgrIPCritTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgrIPCritEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the entries for matching criteria for IP packets on egress. In release 10.0 and higher, this table can also contain IPv6 criteria." ::= { tSapEgressObjects 7 } tSapEgrIPCritEntry OBJECT-TYPE SYNTAX TSapEgrIPCritEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular egress IP or IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX { tSapEgressIndex, tSapEgrIPCritAddrType, tSapEgrIPCritIndex } ::= { tSapEgrIPCritTable 1} TSapEgrIPCritEntry ::= SEQUENCE { tSapEgrIPCritAddrType InetAddressType, tSapEgrIPCritIndex Unsigned32, tSapEgrIPCritRowStatus RowStatus, tSapEgrIPCritLastChanged TimeStamp, tSapEgrIPCritDescription TItemDescription, tSapEgrIPCritActionHsmdaCntrOvr TEgressHsmdaCounterIdOrZero, tSapEgrIPCritSourceIpAddrType InetAddressType, tSapEgrIPCritSourceIpAddr InetAddress, tSapEgrIPCritSourceIpMask InetAddressPrefixLength, tSapEgrIPCritDestIpAddrType InetAddressType, tSapEgrIPCritDestIpAddr InetAddress, tSapEgrIPCritDestIpMask InetAddressPrefixLength, tSapEgrIPCritProtocol TIpProtocol, tSapEgrIPCritSourcePortValue1 TTcpUdpPort, tSapEgrIPCritSourcePortValue2 TTcpUdpPort, tSapEgrIPCritSourcePortOperator TTcpUdpPortOperator, tSapEgrIPCritDestPortValue1 TTcpUdpPort, tSapEgrIPCritDestPortValue2 TTcpUdpPort, tSapEgrIPCritDestPortOperator TTcpUdpPortOperator, tSapEgrIPCritDSCP TDSCPNameOrEmpty, tSapEgrIPCritFragment TItemMatch, tSapEgrIPCritActionFC TFCNameOrEmpty, tSapEgrIPCritActionProfile TProfileOrNone } tSapEgrIPCritAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tSapEgrIPCritAddrType specifies the index address type this entry should match against." DEFVAL { ipv4 } ::= { tSapEgrIPCritEntry 1 } tSapEgrIPCritIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tSapEgrIPCritIndex specifies the index for a sap-egress IP or IPv6 criteria entry." ::= { tSapEgrIPCritEntry 2 } tSapEgrIPCritRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritRowStatus is used for the creation and deletion of sap-egress IP or IPv6 criteria entries." ::= { tSapEgrIPCritEntry 3 } tSapEgrIPCritLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tSapEgrIPCritEntry 4 } tSapEgrIPCritDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDescription specifies a description of the sap-egress IP or IPv6 criteria entry." DEFVAL { "" } ::= { tSapEgrIPCritEntry 5 } tSapEgrIPCritActionHsmdaCntrOvr OBJECT-TYPE SYNTAX TEgressHsmdaCounterIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tSapEgrIPCritActionHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-egress policy specified by tSapEgressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 6 } tSapEgrIPCritSourceIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritSourceIpAddrType specifies the address type of tSapEgrIPCritSourceIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType." DEFVAL { unknown } ::= { tSapEgrIPCritEntry 7 } tSapEgrIPCritSourceIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritSourceIpAddr specifies the IP or IPv6 address to match with source-IP of the packet." DEFVAL { ''H } ::= { tSapEgrIPCritEntry 8 } tSapEgrIPCritSourceIpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritSourceIpMask specifies the number of bits of the source IP or IPv6 address to match." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 9 } tSapEgrIPCritDestIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDestIpAddrType specifies the address type of tSapEgrIPCritDestIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType." DEFVAL { unknown } ::= { tSapEgrIPCritEntry 10 } tSapEgrIPCritDestIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDestIpAddr specifies the IP or IPv6 address to match with destination-IP of the packet." DEFVAL { ''H } ::= { tSapEgrIPCritEntry 11 } tSapEgrIPCritDestIpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDestIpMask specifies the number of bits of the destination IP or IPv6 address to match." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 12 } tSapEgrIPCritProtocol OBJECT-TYPE SYNTAX TIpProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritProtocol specifies the IP protocol or IPv6 next-header to match. The value '-1' is used to disable matching by IP protocol or IPv6 next-header. When this value specifies an IPv6 next-header, since the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60." DEFVAL { -1 } ::= { tSapEgrIPCritEntry 13 } tSapEgrIPCritSourcePortValue1 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritSourcePortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 14 } tSapEgrIPCritSourcePortValue2 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritSourcePortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 15 } tSapEgrIPCritSourcePortOperator OBJECT-TYPE SYNTAX TTcpUdpPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritSourcePortOperator specifies the manner in which tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 are to be used." DEFVAL { none } ::= { tSapEgrIPCritEntry 16 } tSapEgrIPCritDestPortValue1 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDestPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 17 } tSapEgrIPCritDestPortValue2 OBJECT-TYPE SYNTAX TTcpUdpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDestPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator." DEFVAL { 0 } ::= { tSapEgrIPCritEntry 18 } tSapEgrIPCritDestPortOperator OBJECT-TYPE SYNTAX TTcpUdpPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDestPortOperator specifies the manner in which tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue2 are to be used." DEFVAL { none } ::= { tSapEgrIPCritEntry 19 } tSapEgrIPCritDSCP OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritDSCP specifies the DSCP value to match in the packet" DEFVAL { ''H } ::= { tSapEgrIPCritEntry 20 } tSapEgrIPCritFragment OBJECT-TYPE SYNTAX TItemMatch MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrIPCritFragment specifies fragmented packet matching. If the value is 'true', only fragmented packets match. If the value is 'false', only non-fragmented packets match. If the value is 'off', all packets match regardless. This field is only relevant for ipv4. An inconsistentValue error is returned when the value of tSapEgrIPCritFragment is not 'off' and the value of tSapEgrIPCritAddrType is not 'ipv4'." DEFVAL { off } ::= { tSapEgrIPCritEntry 21 } tSapEgrIPCritActionFC OBJECT-TYPE SYNTAX TFCNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP or IPv6 criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions." DEFVAL { ''H } ::= { tSapEgrIPCritEntry 22 } tSapEgrIPCritActionProfile OBJECT-TYPE SYNTAX TProfileOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrIPCritActionProfile specifies the profile of the traffic that matches the specific IP or IPv6 criteria. The value none indicates that the profile is derived from ingress classification and profiling functions." DEFVAL { none } ::= { tSapEgrIPCritEntry 23 } -- ------------------------- -- SAP Egress Policer table -- ------------------------- tSapEgrPolicerTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgrPolicerTableLastChanged indicates the timestamp of last change to the tSapEgrPolicerTable." ::= { tQosTimeStampObjects 86 } tSapEgrPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgrPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapEgrPolicerTable defines SAP Egress Policer Table for providing, via SNMP, the capability of defining the policers. tSapEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapEgressFCTable." ::= { tSapEgressObjects 8 } tSapEgrPolicerEntry OBJECT-TYPE SYNTAX TSapEgrPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapEgrPolicerEntry defines an entry in the tSapEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapEgrPolicerRowStatus." INDEX { tSapEgressIndex, tSapEgrPolicerId } ::= { tSapEgrPolicerTable 1 } TSapEgrPolicerEntry ::= SEQUENCE { tSapEgrPolicerId TEgrPolicerId, tSapEgrPolicerRowStatus RowStatus, tSapEgrPolicerLastChanged TimeStamp, tSapEgrPolicerDescr TItemDescription, tSapEgrPolicerPIRAdaptation TAdaptationRule, tSapEgrPolicerCIRAdaptation TAdaptationRule, tSapEgrPolicerParent TNamedItemOrEmpty, tSapEgrPolicerLevel TLevel, tSapEgrPolicerWeight TPolicerWeight, tSapEgrPolicerAdminPIR THPolPIRRate, tSapEgrPolicerAdminCIR THPolCIRRate, tSapEgrPolicerStatMode TmnxEgrPolicerStatMode, tSapEgrPolicerMBS TPlcrBurstSizeBytes, tSapEgrPolicerHiPrioOnly TBurstPercentOrDefault, tSapEgrPolicerCBS TPlcrBurstSizeBytes, tSapEgrPolicerPktOffset TPerPacketOffset, tSapEgrPolicerAdminPIRPercent Unsigned32, tSapEgrPolicerAdminCIRPercent Unsigned32, tSapEgrPolicerRateType TPolicerRateType, tSapEgrPolicerSlopeStartDepth Unsigned32, tSapEgrPolicerSlopeMaxDepth Unsigned32, tSapEgrPolicerSlopeMaxProb Unsigned32, tSapEgrPolicerSlopeMap TmnxSlopeMap, tSapEgrPolicerAdvCfgPolicy TNamedItemOrEmpty, tSapEgrPolicerProfileCapped TruthValue } tSapEgrPolicerId OBJECT-TYPE SYNTAX TEgrPolicerId MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSapEgrPolicerId defines the SAP Egress Policer identifier. It identifies an sap-egress policer in the managed system." ::= { tSapEgrPolicerEntry 1 } tSapEgrPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerRowStatus allows entries to be created and deleted in the tSapEgrPolicerTable." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tSapEgrPolicerEntry 2 } tSapEgrPolicerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified." ::= { tSapEgrPolicerEntry 3 } tSapEgrPolicerDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerDescr specifies the description of the policer." DEFVAL { ''H } ::= { tSapEgrPolicerEntry 4 } tSapEgrPolicerPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapEgrPolicerEntry 5 } tSapEgrPolicerCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapEgrPolicerEntry 6 } tSapEgrPolicerParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerParent specifies the scheduler to which this queue would be feeding." DEFVAL { ''H } ::= { tSapEgrPolicerEntry 7 } tSapEgrPolicerLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tSapEgrPolicerEntry 8 } tSapEgrPolicerWeight OBJECT-TYPE SYNTAX TPolicerWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tSapEgrPolicerEntry 9 } tSapEgrPolicerAdminPIR OBJECT-TYPE SYNTAX THPolPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapEgrPolicerEntry 10 } tSapEgrPolicerAdminCIR OBJECT-TYPE SYNTAX THPolCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerAdminCIR specifies the administrative CIR specified by the user." DEFVAL { 0 } ::= { tSapEgrPolicerEntry 11 } tSapEgrPolicerStatMode OBJECT-TYPE SYNTAX TmnxEgrPolicerStatMode MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerStatMode specifies the mode of statistics collected by this policer." DEFVAL { minimal } ::= { tSapEgrPolicerEntry 12 } tSapEgrPolicerMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The tSapEgrPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer." DEFVAL { -1 } ::= { tSapEgrPolicerEntry 13 } tSapEgrPolicerHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic." DEFVAL { -1 } ::= { tSapEgrPolicerEntry 14 } tSapEgrPolicerCBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer." DEFVAL { -1 } ::= { tSapEgrPolicerEntry 15 } tSapEgrPolicerPktOffset OBJECT-TYPE SYNTAX TPerPacketOffset MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer." DEFVAL { 0 } ::= { tSapEgrPolicerEntry 16 } tSapEgrPolicerAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'." DEFVAL { 10000 } ::= { tSapEgrPolicerEntry 17 } tSapEgrPolicerAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'." DEFVAL { 0 } ::= { tSapEgrPolicerEntry 18 } tSapEgrPolicerRateType OBJECT-TYPE SYNTAX TPolicerRateType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerRateType specifies the type of egress policer rate. When the value of the object is set to 'kbps', the egresss policer rates are specified in kbps. The objects tSapEgrPolicerAdminPIRPercent and tSapEgrPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the egress policer rates are specified in percentage. The objects tSapEgrPolicerAdminPIR and tSapEgrPolicerAdminCIR will be set to their default values." DEFVAL { kbps } ::= { tSapEgrPolicerEntry 19 } tSapEgrPolicerSlopeStartDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 10000 } ::= { tSapEgrPolicerEntry 20 } tSapEgrPolicerSlopeMaxDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 10000 } ::= { tSapEgrPolicerEntry 21 } tSapEgrPolicerSlopeMaxProb OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapEgrPolicerSlopeStartDepth up to the tSapEgrPolicerSlopeMaxProb at the tSapEgrPolicerSlopeMaxDepth." DEFVAL { 10000 } ::= { tSapEgrPolicerEntry 22 } tSapEgrPolicerSlopeMap OBJECT-TYPE SYNTAX TmnxSlopeMap MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerSlopeMap specifies the slope map to be used with this policer." DEFVAL { none } ::= { tSapEgrPolicerEntry 23 } tSapEgrPolicerAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer." DEFVAL { ''H } ::= { tSapEgrPolicerEntry 24 } tSapEgrPolicerProfileCapped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tSapEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer." DEFVAL { false } ::= { tSapEgrPolicerEntry 25 } -- ---------------------- -- tSapEgrPolicyNameTable -- ---------------------- tSapEgrPolicyNameTableLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgrPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapEgrPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 96 } tSapEgrPolicyNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgrPolicyNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP egress policy name information. Entries are created automatically by the system when tSapEgressPolicyName object is set for the SAP egress policy." ::= { tSapEgressObjects 9 } tSapEgrPolicyNameEntry OBJECT-TYPE SYNTAX TSapEgrPolicyNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic information about a specific SAP egress policy name." INDEX { tSapEgressPolicyName } ::= { tSapEgrPolicyNameTable 1 } TSapEgrPolicyNameEntry ::= SEQUENCE { tSapEgrPolicyNameId TSapEgressPolicyID, tSapEgrPolicyNameRowStatus RowStatus, tSapEgrPolicyNameLastChanged TimeStamp } tSapEgrPolicyNameId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tSapEgrPolicyNameId specifies the policy name associated with this SAP egress policy." ::= { tSapEgrPolicyNameEntry 1 } tSapEgrPolicyNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This value of the object tSapEgrPolicyNameRowStatus specifies the status of this row." ::= { tSapEgrPolicyNameEntry 2 } tSapEgrPolicyNameLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgrPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tSapEgrPolicyNameEntry 3 } -- -- sap-egress policy dot1p table -- tSapEgressDot1pTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgressDot1pTableLastChanged indicates the timestamp of last change to the tSapEgressDot1pTable." ::= { tQosTimeStampObjects 99 } tSapEgressDot1pTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressDot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the list of all dot1p entries for all sap-egress policies." ::= { tSapEgressObjects 10 } tSapEgressDot1pEntry OBJECT-TYPE SYNTAX TSapEgressDot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular dot1p match for a sap-egress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tSapEgressIndex, tSapEgressDot1pValue } ::= { tSapEgressDot1pTable 1 } TSapEgressDot1pEntry ::= SEQUENCE { tSapEgressDot1pValue Dot1PPriority, tSapEgressDot1pRowStatus RowStatus, tSapEgressDot1pLastChanged TimeStamp, tSapEgressDot1pFC TNamedItemOrEmpty, tSapEgressDot1pProfile TProfileUseDEOrNone } tSapEgressDot1pValue OBJECT-TYPE SYNTAX Dot1PPriority (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tSapEgressDot1pValue specifies the dotp value to match in the packet. This value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority." ::= { tSapEgressDot1pEntry 1 } tSapEgressDot1pRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgressDot1pRowStatus allows entries to be created and deleted in the tSapEgressDot1pTable." ::= { tSapEgressDot1pEntry 2 } tSapEgressDot1pLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapEgressDot1pLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { tSapEgressDot1pEntry 3 } tSapEgressDot1pFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressDot1pFC specifies the forwarding class to be used to classify all the traffic that matches the Dot1p value specified by tSapEgressDot1pValue. Unless tSapEgressDot1pFC is specified explicitly, this match will be ignored for classification purposes." DEFVAL { ''H } ::= { tSapEgressDot1pEntry 4 } tSapEgressDot1pProfile OBJECT-TYPE SYNTAX TProfileUseDEOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSapEgressDot1pProfile specifies the profile to use for packets that match the dot1p value specified by tSapEgressDot1pValue." DEFVAL { none } ::= { tSapEgressDot1pEntry 5 } -- -- network policy table -- tNetworkPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tNetworkObjects 1 } tNetworkPolicyEntry OBJECT-TYPE SYNTAX TNetworkPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus." INDEX { tNetworkPolicyIndex } ::= { tNetworkPolicyTable 1 } TNetworkPolicyEntry ::= SEQUENCE { tNetworkPolicyIndex TNetworkPolicyID, tNetworkPolicyRowStatus RowStatus, tNetworkPolicyScope TItemScope, tNetworkPolicyDescription TItemDescription, tNetworkPolicyIngressDefaultActionFC TFCName, tNetworkPolicyIngressDefaultActionProfile TProfileOrDei, tNetworkPolicyEgressRemark TruthValue, tNetworkPolicyLastChanged TimeStamp, tNetworkPolicyIngressLerUseDscp TruthValue, tNetworkPolicyEgressRemarkDscp TruthValue } tNetworkPolicyIndex OBJECT-TYPE SYNTAX TNetworkPolicyID (1..65535|65536|65537) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "" ::= { tNetworkPolicyEntry 1 } tNetworkPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { tNetworkPolicyEntry 2 } tNetworkPolicyScope OBJECT-TYPE SYNTAX TItemScope MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { template } ::= { tNetworkPolicyEntry 5 } tNetworkPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkPolicyDescription holds the description for this policy." DEFVAL { ''H } ::= { tNetworkPolicyEntry 6 } tNetworkPolicyIngressDefaultActionFC OBJECT-TYPE SYNTAX TFCName MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic." DEFVAL { 'be'H } ::= { tNetworkPolicyEntry 7 } tNetworkPolicyIngressDefaultActionProfile OBJECT-TYPE SYNTAX TProfileOrDei MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic." DEFVAL { out } ::= { tNetworkPolicyEntry 8 } tNetworkPolicyEgressRemark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not." DEFVAL { false } ::= { tNetworkPolicyEntry 9 } tNetworkPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row in tNetworkPolicyTable." ::= { tNetworkPolicyEntry 10 } tNetworkPolicyIngressLerUseDscp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits." DEFVAL { false } ::= { tNetworkPolicyEntry 11 } tNetworkPolicyEgressRemarkDscp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkPolicyEgressRemarkDscp object specifies whether DSCP bits in the internal IP header should be remarked. This object is valid only when tNetworkPolicyEgressRemark is set to 'true'." DEFVAL { false } ::= { tNetworkPolicyEntry 12 } -- -- network ingress policy dscp table -- tNetworkIngressDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tNetworkObjects 2 } tNetworkIngressDSCPEntry OBJECT-TYPE SYNTAX TNetworkIngressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tNetworkPolicyIndex, tNetworkIngressDSCP } ::= { tNetworkIngressDSCPTable 1 } TNetworkIngressDSCPEntry ::= SEQUENCE { tNetworkIngressDSCP TDSCPName, tNetworkIngressDSCPRowStatus RowStatus, tNetworkIngressDSCPFC TFCName, tNetworkIngressDSCPProfile TProfile, tNetworkIngressDSCPLastChanged TimeStamp } tNetworkIngressDSCP OBJECT-TYPE SYNTAX TDSCPName MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tNetworkIngressDSCPEntry 1 } tNetworkIngressDSCPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { tNetworkIngressDSCPEntry 2 } tNetworkIngressDSCPFC OBJECT-TYPE SYNTAX TFCName MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { ''H } ::= { tNetworkIngressDSCPEntry 3 } tNetworkIngressDSCPProfile OBJECT-TYPE SYNTAX TProfile MAX-ACCESS read-create STATUS current DESCRIPTION "there is no DEFVAL for this object. it must be deliberately set before activating the row." ::= { tNetworkIngressDSCPEntry 4 } tNetworkIngressDSCPLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tNetworkIngressDSCPTable." ::= { tNetworkIngressDSCPEntry 5 } -- -- network ingress policy dot1p table -- tNetworkIngressDot1pTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressDot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tNetworkObjects 3 } tNetworkIngressDot1pEntry OBJECT-TYPE SYNTAX TNetworkIngressDot1pEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tNetworkPolicyIndex, tNetworkIngressDot1pValue } ::= { tNetworkIngressDot1pTable 1 } TNetworkIngressDot1pEntry ::= SEQUENCE { tNetworkIngressDot1pValue Dot1PPriority, tNetworkIngressDot1pRowStatus RowStatus, tNetworkIngressDot1pFC TFCName, tNetworkIngressDot1pProfile TDEProfileOrDei, tNetworkIngressDot1pLastChanged TimeStamp } tNetworkIngressDot1pValue OBJECT-TYPE SYNTAX Dot1PPriority (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tNetworkIngressDot1pEntry 1 } tNetworkIngressDot1pRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { tNetworkIngressDot1pEntry 2 } tNetworkIngressDot1pFC OBJECT-TYPE SYNTAX TFCName MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { ''H } ::= { tNetworkIngressDot1pEntry 3 } tNetworkIngressDot1pProfile OBJECT-TYPE SYNTAX TDEProfileOrDei MAX-ACCESS read-create STATUS current DESCRIPTION "there is no DEFVAL for this object. It must be deliberately set before activating the row." ::= { tNetworkIngressDot1pEntry 4 } tNetworkIngressDot1pLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tNetworkIngressDot1pTable." ::= { tNetworkIngressDot1pEntry 5 } -- -- network ingress policy lspexp table -- tNetworkIngressLSPEXPTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressLSPEXPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tNetworkObjects 4 } tNetworkIngressLSPEXPEntry OBJECT-TYPE SYNTAX TNetworkIngressLSPEXPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tNetworkPolicyIndex, tNetworkIngressLSPEXP } ::= { tNetworkIngressLSPEXPTable 1 } TNetworkIngressLSPEXPEntry ::= SEQUENCE { tNetworkIngressLSPEXP TLspExpValue, tNetworkIngressLSPEXPRowStatus RowStatus, tNetworkIngressLSPEXPFC TFCName, tNetworkIngressLSPEXPProfile TProfile, tNetworkIngressLSPEXPLastChanged TimeStamp } tNetworkIngressLSPEXP OBJECT-TYPE SYNTAX TLspExpValue (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tNetworkIngressLSPEXPEntry 1 } tNetworkIngressLSPEXPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { tNetworkIngressLSPEXPEntry 2 } tNetworkIngressLSPEXPFC OBJECT-TYPE SYNTAX TFCName MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { ''H } ::= { tNetworkIngressLSPEXPEntry 3 } tNetworkIngressLSPEXPProfile OBJECT-TYPE SYNTAX TProfile MAX-ACCESS read-create STATUS current DESCRIPTION "there is no DEFVAL for this object. it must be deliberately set before activating the row." ::= { tNetworkIngressLSPEXPEntry 4 } tNetworkIngressLSPEXPLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tNetworkIngressLSPEXPTable." ::= { tNetworkIngressLSPEXPEntry 5 } -- -- network egress fc table -- tNetworkEgressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all network policies' egress FC traffic disposition." ::= { tNetworkObjects 7 } tNetworkEgressFCEntry OBJECT-TYPE SYNTAX TNetworkEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tNetworkPolicyIndex, tNetworkEgressFCName } ::= { tNetworkEgressFCTable 1 } TNetworkEgressFCEntry ::= SEQUENCE { tNetworkEgressFCName TFCName, tNetworkEgressFCDSCPInProfile TDSCPNameOrEmpty, tNetworkEgressFCDSCPOutProfile TDSCPNameOrEmpty, tNetworkEgressFCLspExpInProfile TLspExpValue, tNetworkEgressFCLspExpOutProfile TLspExpValue, tNetworkEgressFCDot1pInProfile Dot1PPriority, tNetworkEgressFCDot1pOutProfile Dot1PPriority, tNetworkEgressFCLastChanged TimeStamp, tNetworkEgressFCForceDEValue TDEValue, tNetworkEgressFCDEMark TruthValue, tNetworkEgressFCQGrpQueue TEgressQueueId, tNetworkEgressFCQGrpPolicer TEgrPolicerIdOrNone } tNetworkEgressFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "the name of the forwarding class (FC)." ::= { tNetworkEgressFCEntry 1 } tNetworkEgressFCDSCPInProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "the DSCP to use for in-profile traffic." ::= { tNetworkEgressFCEntry 2 } tNetworkEgressFCDSCPOutProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "the DSCP to use for out-of-profile traffic." ::= { tNetworkEgressFCEntry 3 } tNetworkEgressFCLspExpInProfile OBJECT-TYPE SYNTAX TLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "the lsp-exp value to use for in-profile traffic." ::= { tNetworkEgressFCEntry 4 } tNetworkEgressFCLspExpOutProfile OBJECT-TYPE SYNTAX TLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "the lsp-exp value to use for out-of-profile traffic." ::= { tNetworkEgressFCEntry 5 } tNetworkEgressFCDot1pInProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "the Dot1p to use for in-profile traffic." ::= { tNetworkEgressFCEntry 6 } tNetworkEgressFCDot1pOutProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "the Dot1p to use for out-of-profile traffic." ::= { tNetworkEgressFCEntry 7 } tNetworkEgressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tNetworkEgressFCTable." ::= { tNetworkEgressFCEntry 8 } tNetworkEgressFCForceDEValue OBJECT-TYPE SYNTAX TDEValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'." DEFVAL { -1 } ::= { tNetworkEgressFCEntry 9 } tNetworkEgressFCDEMark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'." DEFVAL { false } ::= { tNetworkEgressFCEntry 10 } tNetworkEgressFCQGrpQueue OBJECT-TYPE SYNTAX TEgressQueueId MAX-ACCESS read-write STATUS current DESCRIPTION "tNetworkEgressFCQGrpQueue specifies the specific queue from queue-group TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this forwarding class." DEFVAL { 0 } ::= { tNetworkEgressFCEntry 11 } tNetworkEgressFCQGrpPolicer OBJECT-TYPE SYNTAX TEgrPolicerIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgressFCQGrpPolicer specifies the policer from queue-group to be used for packets in this forwarding class." DEFVAL { 0 } ::= { tNetworkEgressFCEntry 12 } -- -- network-queue policy table -- tNetworkQueuePolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkQueuePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tNetworkQueueObjects 1 } tNetworkQueuePolicyEntry OBJECT-TYPE SYNTAX TNetworkQueuePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tNetworkQueuePolicy } ::= { tNetworkQueuePolicyTable 1 } TNetworkQueuePolicyEntry ::= SEQUENCE { tNetworkQueuePolicy TNamedItem, tNetworkQueuePolicyRowStatus RowStatus, tNetworkQueuePolicyDescription TItemDescription, tNetworkQueuePolicyLastChanged TimeStamp, tNetworkQueuePolicyEHWrrPlcy TNamedItemOrEmpty, tNetworkQueuePolicyEHPktBOffst TPerPacketOffset } tNetworkQueuePolicy OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tNetworkQueuePolicyEntry 1 } tNetworkQueuePolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { tNetworkQueuePolicyEntry 2 } tNetworkQueuePolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { ''H } ::= { tNetworkQueuePolicyEntry 3 } tNetworkQueuePolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { tNetworkQueuePolicyEntry 8 } tNetworkQueuePolicyEHWrrPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkQueuePolicyEHWrrPlcy specifies the Weighted Round Robin (WRR) policy to use on this HSMDA egress queue." DEFVAL { "" } ::= { tNetworkQueuePolicyEntry 9 } tNetworkQueuePolicyEHPktBOffst OBJECT-TYPE SYNTAX TPerPacketOffset MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkQueuePolicyEHPktBOffst specifies the packet byte offset to use for the HSMDA egress queues. This value is used for the adjustment to make to the size of each packet for HSMDA queue accounting." DEFVAL { 0 } ::= { tNetworkQueuePolicyEntry 10 } -- -- network-queue policy queue table -- tNetworkQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tNetworkQueueObjects 2 } tNetworkQueueEntry OBJECT-TYPE SYNTAX TNetworkQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tNetworkQueuePolicy, tNetworkQueue } ::= { tNetworkQueueTable 1 } TNetworkQueueEntry ::= SEQUENCE { tNetworkQueue TQueueId, tNetworkQueueRowStatus RowStatus, tNetworkQueuePoolName TNamedItemOrEmpty, tNetworkQueueParent TNamedItemOrEmpty, tNetworkQueueLevel TLevel, tNetworkQueueWeight TWeight, tNetworkQueueCIRLevel TLevelOrDefault, tNetworkQueueCIRWeight TWeight, tNetworkQueueMCast TruthValue, tNetworkQueueExpedite INTEGER, tNetworkQueueCIR TRatePercent, tNetworkQueuePIR TPIRRatePercent, tNetworkQueueCBS TBurstHundredthsOfPercent, tNetworkQueueMBS TBurstHundredthsOfPercent, tNetworkQueueHiPrioOnly TBurstPercentOrDefault, tNetworkQueueLastChanged TimeStamp, tNetworkQueueUsePortParent TruthValue, tNetworkQueuePortLvl TLevel, tNetworkQueuePortWght TWeight, tNetworkQueuePortCIRLvl TLevelOrDefault, tNetworkQueuePortCIRWght TWeight, tNetworkQueuePortAvgOverhead Unsigned32, tNetworkQueueCIRAdaptation TAdaptationRule, tNetworkQueuePIRAdaptation TAdaptationRule } tNetworkQueue OBJECT-TYPE SYNTAX TQueueId (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue ID is used as the secondary index to the table entry." ::= { tNetworkQueueEntry 1 } tNetworkQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tNetworkQueueEntry 2 } tNetworkQueuePoolName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue." DEFVAL { ''H } ::= { tNetworkQueueEntry 3 } tNetworkQueueParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The scheduler to which this queue would be feeding to." DEFVAL { ''H } ::= { tNetworkQueueEntry 4 } tNetworkQueueLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding to the parent." DEFVAL { 1 } ::= { tNetworkQueueEntry 5 } tNetworkQueueWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used by the scheduler to which this queue would be feeding to." DEFVAL { 1 } ::= { tNetworkQueueEntry 6 } tNetworkQueueCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic." DEFVAL { 0 } ::= { tNetworkQueueEntry 7 } tNetworkQueueCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to." DEFVAL { 1 } ::= { tNetworkQueueEntry 8 } tNetworkQueueMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this is a multicast queue or not." DEFVAL { false } ::= { tNetworkQueueEntry 9 } tNetworkQueueExpedite OBJECT-TYPE SYNTAX INTEGER { expedited (1), auto-expedited(2), non-expedited (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter." DEFVAL { auto-expedited } ::= { tNetworkQueueEntry 10 } tNetworkQueueCIR OBJECT-TYPE SYNTAX TRatePercent MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of max rate allowed." DEFVAL { 0 } ::= { tNetworkQueueEntry 11 } tNetworkQueuePIR OBJECT-TYPE SYNTAX TPIRRatePercent MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of max rate allowed." DEFVAL { 100 } ::= { tNetworkQueueEntry 12 } tNetworkQueueCBS OBJECT-TYPE SYNTAX TBurstHundredthsOfPercent UNITS "Hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of reserved buffer space for the queue, defined to two decimal places." DEFVAL { 100 } ::= { tNetworkQueueEntry 13 } tNetworkQueueMBS OBJECT-TYPE SYNTAX TBurstHundredthsOfPercent UNITS "Hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of reserved buffer space for the queue, defined to two decimal places." DEFVAL { 10000 } ::= { tNetworkQueueEntry 14 } tNetworkQueueHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of buffer space for the queue, used exclusively by high priority packets." DEFVAL { -1 } ::= { tNetworkQueueEntry 15 } tNetworkQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable." ::= { tNetworkQueueEntry 16 } tNetworkQueueUsePortParent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler." DEFVAL { false } ::= { tNetworkQueueEntry 17 } tNetworkQueuePortLvl OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tNetworkQueueEntry 18 } tNetworkQueuePortWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tNetworkQueueEntry 19 } tNetworkQueuePortCIRLvl OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tNetworkQueueEntry 20 } tNetworkQueuePortCIRWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tNetworkQueueEntry 21 } tNetworkQueuePortAvgOverhead OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "Hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa." DEFVAL { 0 } ::= { tNetworkQueueEntry 22 } tNetworkQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset." DEFVAL { closest } ::= { tNetworkQueueEntry 23 } tNetworkQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset." DEFVAL { closest } ::= { tNetworkQueueEntry 24 } -- -- network-queue policy fc table -- tNetworkQueueFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkQueueFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tNetworkQueueObjects 3 } tNetworkQueueFCEntry OBJECT-TYPE SYNTAX TNetworkQueueFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tNetworkQueuePolicy, tNetworkQueueFCName } ::= { tNetworkQueueFCTable 1 } TNetworkQueueFCEntry ::= SEQUENCE { tNetworkQueueFCName TFCName, tNetworkQueueFCRowStatus RowStatus, tNetworkQueueFC TQueueId, tNetworkQueueFCMCast TQueueId, tNetworkQueueFCLastChanged TimeStamp, tNetworkQueueFCEgrHsmdaQueue TQueueId } tNetworkQueueFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding class name." ::= { tNetworkQueueFCEntry 1 } tNetworkQueueFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this queue." ::= { tNetworkQueueFCEntry 2 } tNetworkQueueFC OBJECT-TYPE SYNTAX TQueueId (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The specific queue to be used for packets in this forwarding class." DEFVAL { 1 } ::= { tNetworkQueueFCEntry 3 } tNetworkQueueFCMCast OBJECT-TYPE SYNTAX TQueueId (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant." DEFVAL { 9 } ::= { tNetworkQueueFCEntry 4 } tNetworkQueueFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tNetworkQueueFCTable." ::= { tNetworkQueueFCEntry 7 } tNetworkQueueFCEgrHsmdaQueue OBJECT-TYPE SYNTAX TQueueId (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkQueueFCEgrHsmdaQueue specifies the egress hsmda queue to be used for packets in this forwarding class. This is only applicable on supported hsmda ports." ::= { tNetworkQueueFCEntry 8 } -- -- Network egress queue HSMDA table -- tNetworkEgrHsmdaQueueTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueueTblLastChgd indicates the timestamp of last change to this row in tNetworkEgrHsmdaQueueTable." ::= { tQosTimeStampObjects 94 } tNetworkEgrHsmdaQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkEgrHsmdaQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tNetworkEgrHsmdaQueueTable contains the information about all network egress policies on HSMDA queues. Entries in this table are created whenever a network queue policy is created in tNetworkQueuePolicyEntry." ::= { tNetworkQueueObjects 4 } tNetworkEgrHsmdaQueueEntry OBJECT-TYPE SYNTAX TNetworkEgrHsmdaQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in tNetworkEgrHsmdaQueueEntry represents the information about a particular HSMDA queue for a network egress policy specified by tNetworkEgrHsmdaQueue." INDEX { tNetworkQueuePolicy, tNetworkEgrHsmdaQueue } ::= { tNetworkEgrHsmdaQueueTable 1 } TNetworkEgrHsmdaQueueEntry ::= SEQUENCE { tNetworkEgrHsmdaQueue TEgressHsmdaQueueId, tNetworkEgrHsmdaQueuePIRPercent Unsigned32, tNetworkEgrHsmdaQueuePIRAdaptn TAdaptationRule, tNetworkEgrHsmdaQueueWrrWeight THsmdaWrrWeight, tNetworkEgrHsmdaQueueMBS THSMDABurstSizeBytes, tNetworkEgrHsmdaQueueSlopePolicy TNamedItem, tNetworkEgrHsmdaQueueLastChanged TimeStamp, tNetworkEgrHsmdaQueueBurstLimit THSMDAQueueBurstLimit } tNetworkEgrHsmdaQueue OBJECT-TYPE SYNTAX TEgressHsmdaQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueue indicates the HSMDA queue ID used as the secondary index to the table entry." ::= { tNetworkEgrHsmdaQueueEntry 1 } tNetworkEgrHsmdaQueuePIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueuePIRPercent specifies the queue's PIR expressed as a percentage of port line rate." DEFVAL { 10000 } ::= { tNetworkEgrHsmdaQueueEntry 2 } tNetworkEgrHsmdaQueuePIRAdaptn OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tNetworkEgrHsmdaQueueEntry 3 } tNetworkEgrHsmdaQueueWrrWeight OBJECT-TYPE SYNTAX THsmdaWrrWeight MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class." DEFVAL { 1 } ::= { tNetworkEgrHsmdaQueueEntry 4 } tNetworkEgrHsmdaQueueMBS OBJECT-TYPE SYNTAX THSMDABurstSizeBytes UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueueMBS specifies the maximum amount of buffer space, in bytes, allowed for this network egress HSMDA queue." DEFVAL { -1 } ::= { tNetworkEgrHsmdaQueueEntry 5 } tNetworkEgrHsmdaQueueSlopePolicy OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueueSlopePolicy specifies the slope policy on this network egress HSMDA queue. The slope policy defines the WRED slope behavior for this queue." DEFVAL { "default" } ::= { tNetworkEgrHsmdaQueueEntry 6 } tNetworkEgrHsmdaQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueueLastChanged indicates the sysUpTime for the last change to this row." ::= { tNetworkEgrHsmdaQueueEntry 7 } tNetworkEgrHsmdaQueueBurstLimit OBJECT-TYPE SYNTAX THSMDAQueueBurstLimit UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue." DEFVAL { -1 } ::= { tNetworkEgrHsmdaQueueEntry 8 } -- -- shared queue policy table -- tSharedQueuePolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSharedQueuePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Alcatel-Lucent SROS series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted." ::= { tSharedQueueObjects 1 } tSharedQueuePolicyEntry OBJECT-TYPE SYNTAX TSharedQueuePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus." INDEX { tSharedQueuePolicy } ::= { tSharedQueuePolicyTable 1 } TSharedQueuePolicyEntry ::= SEQUENCE { tSharedQueuePolicy TNamedItem, tSharedQueuePolicyRowStatus RowStatus, tSharedQueuePolicyLastChanged TimeStamp, tSharedQueuePolicyDescription TItemDescription } tSharedQueuePolicy OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system." ::= { tSharedQueuePolicyEntry 1 } tSharedQueuePolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tSharedQueuePolicyEntry 2 } tSharedQueuePolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified." ::= { tSharedQueuePolicyEntry 3 } tSharedQueuePolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters." DEFVAL { ''H } ::= { tSharedQueuePolicyEntry 4 } -- -- queue policy queue table -- tSharedQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TSharedQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Alcatel-Lucent SROS series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created." ::= { tSharedQueueObjects 2 } tSharedQueueEntry OBJECT-TYPE SYNTAX TSharedQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable." INDEX { tSharedQueuePolicy, tSharedQueueId } ::= { tSharedQueueTable 1 } TSharedQueueEntry ::= SEQUENCE { tSharedQueueId TQueueId, tSharedQueueRowStatus RowStatus, tSharedQueueLastChanged TimeStamp, tSharedQueuePoolName TNamedItemOrEmpty, tSharedQueueParent TNamedItemOrEmpty, tSharedQueueLevel TLevel, tSharedQueueWeight TWeight, tSharedQueueCIRLevel TLevelOrDefault, tSharedQueueCIRWeight TWeight, tSharedQueueExpedite INTEGER, tSharedQueueCIR TRatePercent, tSharedQueuePIR TPIRRatePercent, tSharedQueueCBS TBurstPercent, tSharedQueueMBS TBurstPercent, tSharedQueueHiPrioOnly TBurstPercentOrDefault, tSharedQueueIsMultipoint TruthValue } tSharedQueueId OBJECT-TYPE SYNTAX TQueueId (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system." ::= { tSharedQueueEntry 1 } tSharedQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tSharedQueueEntry 2 } tSharedQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified." ::= { tSharedQueueEntry 3 } tSharedQueuePoolName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated." DEFVAL { ''H } ::= { tSharedQueueEntry 4 } tSharedQueueParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated." DEFVAL { ''H } ::= { tSharedQueueEntry 5 } tSharedQueueLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate." DEFVAL { 1 } ::= { tSharedQueueEntry 6 } tSharedQueueWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate." DEFVAL { 1 } ::= { tSharedQueueEntry 7 } tSharedQueueCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate." DEFVAL { 0 } ::= { tSharedQueueEntry 8 } tSharedQueueCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate." DEFVAL { 1 } ::= { tSharedQueueEntry 9 } tSharedQueueExpedite OBJECT-TYPE SYNTAX INTEGER { expedited (1), auto-expedited(2), non-expedited (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue." DEFVAL { auto-expedited } ::= { tSharedQueueEntry 10 } tSharedQueueCIR OBJECT-TYPE SYNTAX TRatePercent MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue." DEFVAL { 0 } ::= { tSharedQueueEntry 11 } tSharedQueuePIR OBJECT-TYPE SYNTAX TPIRRatePercent MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue." DEFVAL { 100 } ::= { tSharedQueueEntry 12 } tSharedQueueCBS OBJECT-TYPE SYNTAX TBurstPercent MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue." DEFVAL { 0 } ::= { tSharedQueueEntry 13 } tSharedQueueMBS OBJECT-TYPE SYNTAX TBurstPercent MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue." DEFVAL { 100 } ::= { tSharedQueueEntry 14 } tSharedQueueHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue." DEFVAL { -1 } ::= { tSharedQueueEntry 15 } tSharedQueueIsMultipoint OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be modified at row creation time; any attempt to set it after creation is silently ignored." DEFVAL { false } ::= { tSharedQueueEntry 16 } -- -- queue policy fc table -- tSharedQueueFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSharedQueueFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Alcatel-Lucent SROS series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy." ::= { tSharedQueueObjects 3 } tSharedQueueFCEntry OBJECT-TYPE SYNTAX TSharedQueueFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus." INDEX { tSharedQueuePolicy, tSharedQueueFCName } ::= { tSharedQueueFCTable 1 } TSharedQueueFCEntry ::= SEQUENCE { tSharedQueueFCName TFCName, tSharedQueueFCRowStatus RowStatus, tSharedQueueFCLastChanged TimeStamp, tSharedQueueFCQueue TQueueId, tSharedQueueFCMCastQueue TQueueId, tSharedQueueFCBCastQueue TQueueId, tSharedQueueFCUnknownQueue TQueueId } tSharedQueueFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system." ::= { tSharedQueueFCEntry 1 } tSharedQueueFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tSharedQueueFCEntry 2 } tSharedQueueFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified." ::= { tSharedQueueFCEntry 3 } tSharedQueueFCQueue OBJECT-TYPE SYNTAX TQueueId (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use." DEFVAL { 1 } ::= { tSharedQueueFCEntry 4 } tSharedQueueFCMCastQueue OBJECT-TYPE SYNTAX TQueueId (9..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use." DEFVAL { 9 } ::= { tSharedQueueFCEntry 5 } tSharedQueueFCBCastQueue OBJECT-TYPE SYNTAX TQueueId (9..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use." DEFVAL { 17 } ::= { tSharedQueueFCEntry 6 } tSharedQueueFCUnknownQueue OBJECT-TYPE SYNTAX TQueueId (9..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use." DEFVAL { 25 } ::= { tSharedQueueFCEntry 7 } -- -- ingress queue group table -- tQosIngQGroupTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosIngQGroupTableLastChanged indicates the timestamp of last change to the tQosIngQGroupTable." ::= { tQosTimeStampObjects 6 } tQosIngQGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosIngQGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngQGroupTable defines Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosIngQueueTable. tQosIngQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable." ::= { tSharedQueueObjects 4 } tQosIngQGroupEntry OBJECT-TYPE SYNTAX TQosIngQGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngQGroupEntry defines an entry in the tQosIngQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosIngQGroupRowStatus." INDEX { tQosIngQGroupName } ::= { tQosIngQGroupTable 1 } TQosIngQGroupEntry ::= SEQUENCE { tQosIngQGroupName TNamedItem, tQosIngQGroupRowStatus RowStatus, tQosIngQGroupLastChanged TimeStamp, tQosIngQGroupDescr TItemDescription } tQosIngQGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system." ::= { tQosIngQGroupEntry 1 } tQosIngQGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQGroupRowStatus allows entries to be created and deleted in the tQosIngQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tQosIngQGroupEntry 2 } tQosIngQGroupLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosIngQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified." ::= { tQosIngQGroupEntry 3 } tQosIngQGroupDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQGroupDescr specifies the description of the queue-group." DEFVAL { ''H } ::= { tQosIngQGroupEntry 4 } -- -- ingress queue table -- tQosIngQTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosIngQTableLastChanged indicates the timestamp of last change to the tQosIngQueueTable." ::= { tQosTimeStampObjects 7 } tQosIngQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosIngQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngQueueTable defines all ingress queues." ::= { tSharedQueueObjects 5 } tQosIngQueueEntry OBJECT-TYPE SYNTAX TQosIngQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngQueueEntry defines a particular ingress queue. Entries are created by user by setting tQosIngQueueRowStatus." INDEX { tQosIngQGroupName, tQosIngQueue } ::= { tQosIngQueueTable 1 } TQosIngQueueEntry ::= SEQUENCE { tQosIngQueue TIngressQueueId, tQosIngQueueRowStatus RowStatus, tQosIngQueueParent TNamedItemOrEmpty, tQosIngQueueLevel TLevel, tQosIngQueueWeight TWeight, tQosIngQueueCIRLevel TLevelOrDefault, tQosIngQueueCIRWeight TWeight, tQosIngQueueMCast TruthValue, tQosIngQueueExpedite INTEGER, tQosIngQueueCBS TBurstSize, tQosIngQueueMBS TBurstSize, tQosIngQueueHiPrioOnly TBurstPercentOrDefault, tQosIngQueuePIRAdaptation TAdaptationRule, tQosIngQueueCIRAdaptation TAdaptationRule, tQosIngQueueAdminPIR TPIRRate, tQosIngQueueAdminCIR TCIRRate, tQosIngQueueLastChanged TimeStamp, tQosIngQueuePoliced TruthValue, tQosIngQueueMode TQueueMode, tQosIngQueuePoolName TNamedItemOrEmpty, tQosIngQueueMBSBytes TBurstSizeBytes, tQosIngQueueBurstLimit TBurstLimit, tQosIngQueueAdvCfgPolicy TNamedItemOrEmpty } tQosIngQueue OBJECT-TYPE SYNTAX TIngressQueueId (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngQueue specifies the queue ID which is used as the secondary index to the table entry." ::= { tQosIngQueueEntry 1 } tQosIngQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueRowStatus is the Row-Status of the entry. This allows creation/deletion of rows in this table." ::= { tQosIngQueueEntry 2 } tQosIngQueueParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueParent specifies the scheduler to which this queue would be feeding." DEFVAL { ''H } ::= { tQosIngQueueEntry 3 } tQosIngQueueLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tQosIngQueueEntry 4 } tQosIngQueueWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tQosIngQueueEntry 5 } tQosIngQueueCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic." DEFVAL { 0 } ::= { tQosIngQueueEntry 6 } tQosIngQueueCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tQosIngQueueEntry 7 } tQosIngQueueMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueMCast specifies if this is a multicast queue." DEFVAL { false } ::= { tQosIngQueueEntry 8 } tQosIngQueueExpedite OBJECT-TYPE SYNTAX INTEGER { expedited (1), bestEffort (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. This attribute is associated with the queue at the time of creation and cannot be modified thereafter." DEFVAL { bestEffort } ::= { tQosIngQueueEntry 9 } tQosIngQueueCBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilo-bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueCBS specifies the amount of reserved buffer space for the queue." DEFVAL { -1 } ::= { tQosIngQueueEntry 10 } tQosIngQueueMBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilo-bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "tQosIngQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosIngQueueMBSBytes object." DEFVAL { -1 } ::= { tQosIngQueueEntry 11 } tQosIngQueueHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets." DEFVAL { -1 } ::= { tQosIngQueueEntry 12 } tQosIngQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosIngQueueEntry 13 } tQosIngQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosIngQueueEntry 14 } tQosIngQueueAdminPIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tQosIngQueueEntry 15 } tQosIngQueueAdminCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueAdminCIR specifies the administrative CIR specified by the user." DEFVAL { 0 } ::= { tQosIngQueueEntry 16 } tQosIngQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosIngQueueLastChanged specifies the timestamp of last change to this row in tQosIngQueueTable." ::= { tQosIngQueueEntry 17 } tQosIngQueuePoliced OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tQosIngQueuePoliced overrides the bandwidth specified by the object tQosIngQueueAdminCIR." DEFVAL { false } ::= { tQosIngQueueEntry 18 } tQosIngQueueMode OBJECT-TYPE SYNTAX TQueueMode MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter." DEFVAL { priority } ::= { tQosIngQueueEntry 19 } tQosIngQueuePoolName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueuePoolName specifies the name of the pool to be applied for the ingress queue." DEFVAL { ''H } ::= { tQosIngQueueEntry 20 } tQosIngQueueMBSBytes OBJECT-TYPE SYNTAX TBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue." DEFVAL { -1 } ::= { tQosIngQueueEntry 21 } tQosIngQueueBurstLimit OBJECT-TYPE SYNTAX TBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngQueueBurstLimit specifies the explicit shaping burst size of a queue." DEFVAL { -1 } ::= { tQosIngQueueEntry 22 } tQosIngQueueAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue." DEFVAL { ''H } ::= { tQosIngQueueEntry 23 } -- -- egress queue group table -- tQosEgrQGroupTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosEgrQGroupTableLastChanged indicates the timestamp of last change to the tQosEgrQGroupTable." ::= { tQosTimeStampObjects 8 } tQosEgrQGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosEgrQGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrQGroupTable defines the Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosEgrQueueTable. tQosEgrQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable." ::= { tSharedQueueObjects 6 } tQosEgrQGroupEntry OBJECT-TYPE SYNTAX TQosEgrQGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrQGroupEntry defines an entry in the tQosEgrQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosEgrQGroupRowStatus." INDEX { tQosEgrQGroupName } ::= { tQosEgrQGroupTable 1 } TQosEgrQGroupEntry ::= SEQUENCE { tQosEgrQGroupName TNamedItem, tQosEgrQGroupRowStatus RowStatus, tQosEgrQGroupLastChanged TimeStamp, tQosEgrQGroupDescr TItemDescription } tQosEgrQGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system." ::= { tQosEgrQGroupEntry 1 } tQosEgrQGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrQGroupRowStatus allows entries to be created and deleted in the tQosEgrQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { tQosEgrQGroupEntry 2 } tQosEgrQGroupLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosEgrQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified." ::= { tQosEgrQGroupEntry 3 } tQosEgrQGroupDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrQGroupDescr specifies the description of the queue-group." DEFVAL { ''H } ::= { tQosEgrQGroupEntry 4 } -- -- qos egress policy queue table -- tQosEgrQTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosEgrQTableLastChanged indicates the timestamp of last change to the tQosEgrQueueTable." ::= { tQosTimeStampObjects 9 } tQosEgrQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosEgrQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrQueueTable defines all egress queues." ::= { tSharedQueueObjects 7 } tQosEgrQueueEntry OBJECT-TYPE SYNTAX TQosEgrQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrQueueEntry defines a particular egress queue. Entries are created and deleted by user." INDEX { tQosEgrQGroupName, tQosEgrQueue } ::= { tQosEgrQueueTable 1 } TQosEgrQueueEntry ::= SEQUENCE { tQosEgrQueue TEgressQueueId, tQosEgrQueueRowStatus RowStatus, tQosEgrQueueParent TNamedItemOrEmpty, tQosEgrQueueLevel TLevel, tQosEgrQueueWeight TWeight, tQosEgrQueueCIRLevel TLevelOrDefault, tQosEgrQueueCIRWeight TWeight, tQosEgrQueueExpedite INTEGER, tQosEgrQueueCBS TBurstSize, tQosEgrQueueMBS TBurstSize, tQosEgrQueueHiPrioOnly TBurstPercentOrDefault, tQosEgrQueuePIRAdaptation TAdaptationRule, tQosEgrQueueCIRAdaptation TAdaptationRule, tQosEgrQueueAdminPIR TPIRRate, tQosEgrQueueAdminCIR TCIRRate, tQosEgrQueueLastChanged TimeStamp, tQosEgrQueueUsePortParent TruthValue, tQosEgrQueuePortLvl TLevel, tQosEgrQueuePortWght TWeight, tQosEgrQueuePortCIRLvl TLevelOrDefault, tQosEgrQueuePortCIRWght TWeight, tQosEgrQueuePoolName TNamedItemOrEmpty, tQosEgrQueueXPWredQ TruthValue, tQosEgrQueueXPWredQSlope TNamedItem, tQosEgrQueueMBSBytes TBurstSizeBytes, tQosEgrQueueAdminPIRPercent Unsigned32, tQosEgrQueueAdminCIRPercent Unsigned32, tQosEgrQueueRateType TRateType, tQosEgrQueueBurstLimit TBurstLimit, tQosEgrQueueAdvCfgPolicy TNamedItemOrEmpty, tQosEgrQueuePktOffset TPerPacketOffset } tQosEgrQueue OBJECT-TYPE SYNTAX TEgressQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQosEgrQueue identifies the queue index which is used as the second index to the table entry. Zero is not allowed." ::= { tQosEgrQueueEntry 1 } tQosEgrQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tQosEgrQueueEntry 2 } tQosEgrQueueParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueParent specifies the scheduler to which this queue would be feeding." DEFVAL { ''H } ::= { tQosEgrQueueEntry 3 } tQosEgrQueueLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tQosEgrQueueEntry 4 } tQosEgrQueueWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tQosEgrQueueEntry 5 } tQosEgrQueueCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueCIRLevel specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic." DEFVAL { 0 } ::= { tQosEgrQueueEntry 6 } tQosEgrQueueCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tQosEgrQueueEntry 7 } tQosEgrQueueExpedite OBJECT-TYPE SYNTAX INTEGER { expedited (1), bestEffort (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers." DEFVAL { bestEffort } ::= { tQosEgrQueueEntry 8 } tQosEgrQueueCBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilo-bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueCBS specifies the amount of reserved buffer space for the queue." DEFVAL { -1 } ::= { tQosEgrQueueEntry 9 } tQosEgrQueueMBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilo-bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tQosEgrQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosEgrQueueMBSBytes object." DEFVAL { -1 } ::= { tQosEgrQueueEntry 10 } tQosEgrQueueHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets." DEFVAL { -1 } ::= { tQosEgrQueueEntry 11 } tQosEgrQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosEgrQueueEntry 12 } tQosEgrQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosEgrQueueEntry 13 } tQosEgrQueueAdminPIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueAdminPIR specifies the administrative PIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'." DEFVAL { -1 } ::= { tQosEgrQueueEntry 14 } tQosEgrQueueAdminCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueAdminCIR specifies the administrative CIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'." DEFVAL { 0 } ::= { tQosEgrQueueEntry 15 } tQosEgrQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQosEgrQueueLastChanged indicates the timestamp of last change to this row in tQosEgrQueueTable." ::= { tQosEgrQueueEntry 18 } tQosEgrQueueUsePortParent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tQosEgrQueueParent. Only one kind of parent is allowed." DEFVAL { false } ::= { tQosEgrQueueEntry 19 } tQosEgrQueuePortLvl OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tQosEgrQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tQosEgrQueueEntry 20 } tQosEgrQueuePortWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tQosEgrQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tQosEgrQueueEntry 21 } tQosEgrQueuePortCIRLvl OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tQosEgrQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tQosEgrQueueEntry 22 } tQosEgrQueuePortCIRWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tQosEgrQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tQosEgrQueueEntry 23 } tQosEgrQueuePoolName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueuePoolName specifies the name of the pool to be applied for SAP egress queue." DEFVAL { ''H } ::= { tQosEgrQueueEntry 24 } tQosEgrQueueXPWredQ OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning." DEFVAL { false } ::= { tQosEgrQueueEntry 25 } tQosEgrQueueXPWredQSlope OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueXPWredQSlope specifies the name of the slope-policy to be applied for QOS egress queue. When tQosEgrQueueXPWredQ has the value 'false', an 'inconsistentValue' error is returned if an attempt is made to set this object to a value other than 'default'." DEFVAL { "default" } ::= { tQosEgrQueueEntry 26 } tQosEgrQueueMBSBytes OBJECT-TYPE SYNTAX TBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue." DEFVAL { -1 } ::= { tQosEgrQueueEntry 27 } tQosEgrQueueAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueAdminPIRPercent specifies the administrative PIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'." DEFVAL { 10000 } ::= { tQosEgrQueueEntry 28 } tQosEgrQueueAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueAdminCIRPercent specifies the administrative CIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'." DEFVAL { 0 } ::= { tQosEgrQueueEntry 29 } tQosEgrQueueRateType OBJECT-TYPE SYNTAX TRateType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueRateType specifies the type of Egress queue rate. When the value of the object is set to 'kbps', the egresss queue rates are specified in kbps. The objects tQosEgrQueueAdminCIRPercent and tQosEgrQueueAdminPIRPercent will be set to their default values. When the value of the object is set to 'percent', the egress queue rates are specified in percentage. The objects tQosEgrQueueAdminCIR and tQosEgrQueueAdminPIR will be set to their default values." DEFVAL { kbps } ::= { tQosEgrQueueEntry 30 } tQosEgrQueueBurstLimit OBJECT-TYPE SYNTAX TBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueBurstLimit specifies the explicit shaping burst size of a queue." DEFVAL { -1 } ::= { tQosEgrQueueEntry 31 } tQosEgrQueueAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue." DEFVAL { ''H } ::= { tQosEgrQueueEntry 32 } tQosEgrQueuePktOffset OBJECT-TYPE SYNTAX TPerPacketOffset MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQueuePktOffset specifies the packet byte offset to be applied with this queue." DEFVAL { 0 } ::= { tQosEgrQueueEntry 33 } -- -- qos egress queue group FC table -- tQosEgrQGroupFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQosEgrQGroupFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQosEgrQGroupFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 90 } tQosEgrQGroupFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosEgrQGroupFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the information of forwarding classes in a egress queue group." ::= { tSharedQueueObjects 8 } tQosEgrQGroupFCEntry OBJECT-TYPE SYNTAX TQosEgrQGroupFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular queue group's forwarding class." INDEX { tQosEgrQGroupName, tQosEgrQGroupFCName } ::= { tQosEgrQGroupFCTable 1 } TQosEgrQGroupFCEntry ::= SEQUENCE { tQosEgrQGroupFCName TFCName, tQosEgrQGroupFCRowStatus RowStatus, tQosEgrQGroupFCLastChanged TimeStamp, tQosEgrQGroupFCQueue TEgressQueueId } tQosEgrQGroupFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tQosEgrQGroupFCName specifies the name of the forwarding class" ::= { tQosEgrQGroupFCEntry 1 } tQosEgrQGroupFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQGroupFCRowStatus specifies the Row Status for this entry." ::= { tQosEgrQGroupFCEntry 2 } tQosEgrQGroupFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQosEgrQGroupFCLastChanged indicates the timestamp of last change to this row in tQosEgrQGroupFCTable." ::= { tQosEgrQGroupFCEntry 3 } tQosEgrQGroupFCQueue OBJECT-TYPE SYNTAX TEgressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrQGroupFCQueue specifies the queue to be used for the packets in this forwarding class. " DEFVAL { 0 } ::= { tQosEgrQGroupFCEntry 4 } -- -- Slope policy table -- tSlopePolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic." ::= { tSlopeObjects 1 } tSlopePolicyEntry OBJECT-TYPE SYNTAX TSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Entry." INDEX { tSlopePolicy } ::= { tSlopePolicyTable 1 } TSlopePolicyEntry ::= SEQUENCE { tSlopePolicy TNamedItem, tSlopeRowStatus RowStatus, tSlopeDescription TItemDescription, tSlopeHiAdminStatus INTEGER, tSlopeHiStartAverage Unsigned32, tSlopeHiMaxAverage Unsigned32, tSlopeHiMaxProbability Unsigned32, tSlopeLoAdminStatus INTEGER, tSlopeLoStartAverage Unsigned32, tSlopeLoMaxAverage Unsigned32, tSlopeLoMaxProbability Unsigned32, tSlopeTimeAvgFactor Unsigned32, tSlopeLastChanged TimeStamp } tSlopePolicy OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tSlopePolicy maintains the name of the slope policy identifying the policy." ::= { tSlopePolicyEntry 1 } tSlopeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tSlopePolicyEntry 2 } tSlopeDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "User-provided description of the policy." DEFVAL { ''H } ::= { tSlopePolicyEntry 3 } tSlopeHiAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive." DEFVAL { down } ::= { tSlopePolicyEntry 4 } tSlopeHiStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 70 } ::= { tSlopePolicyEntry 5 } tSlopeHiMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 90 } ::= { tSlopePolicyEntry 6 } tSlopeHiMaxProbability OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage." DEFVAL { 80 } ::= { tSlopePolicyEntry 7 } tSlopeLoAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive." DEFVAL { down } ::= { tSlopePolicyEntry 8 } tSlopeLoStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 50 } ::= { tSlopePolicyEntry 9 } tSlopeLoMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 75 } ::= { tSlopePolicyEntry 10 } tSlopeLoMaxProbability OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage." DEFVAL { 80 } ::= { tSlopePolicyEntry 11 } tSlopeTimeAvgFactor OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization." DEFVAL { 7 } ::= { tSlopePolicyEntry 12 } tSlopeLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of when this entry was last changed." ::= { tSlopePolicyEntry 13 } -- -- Slope policy table -- tHsmdaSlopePolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF THsmdaSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tHsmdaSlopePolicyTable has an entry for each HSMDA slope policy configured on this system." ::= { tSlopeObjects 2 } tHsmdaSlopePolicyEntry OBJECT-TYPE SYNTAX THsmdaSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular HSMDA slope policy. Entries are created and deleted by the user." INDEX { tHsmdaSlopePolicyName } ::= { tHsmdaSlopePolicyTable 1 } THsmdaSlopePolicyEntry ::= SEQUENCE { tHsmdaSlopePolicyName TNamedItem, tHsmdaSlopePolicyRowStatus RowStatus, tHsmdaSlopeLastChanged TimeStamp, tHsmdaSlopeDescription TItemDescription, tHsmdaSlopeQueueMbs Unsigned32, tHsmdaSlopeHiAdminStatus TmnxEnabledDisabled, tHsmdaSlopeHiStartDepth Unsigned32, tHsmdaSlopeHiMaxDepth Unsigned32, tHsmdaSlopeHiMaxProbability Unsigned32, tHsmdaSlopeLoAdminStatus TmnxEnabledDisabled, tHsmdaSlopeLoStartDepth Unsigned32, tHsmdaSlopeLoMaxDepth Unsigned32, tHsmdaSlopeLoMaxProbability Unsigned32 } tHsmdaSlopePolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tHsmdaSlopePolicyName specifies the name of the HSMDA slope policy." ::= { tHsmdaSlopePolicyEntry 1 } tHsmdaSlopePolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopePolicyRowStatus is used for the creation and deletion of HSMDA slope policies." ::= { tHsmdaSlopePolicyEntry 2 } tHsmdaSlopeLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tHsmdaSlopeLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tHsmdaSlopePolicyEntry 3 } tHsmdaSlopeDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeDescription specifies the description of this HSMDA slope policy." DEFVAL { "" } ::= { tHsmdaSlopePolicyEntry 4 } tHsmdaSlopeQueueMbs OBJECT-TYPE SYNTAX Unsigned32 (0..500000) UNITS "bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tHsmdaSlopeQueueMbs specifies the maximum amount of buffer space, in bytes, allowed for any HSMDA queue associated with this HSMDA slope policy. Specifying a value of 0 effectively disables all queues associated with this slope policy causing each queue to discard all packets. This object is obsoleted in 10.0 Release." DEFVAL { 16800 } ::= { tHsmdaSlopePolicyEntry 5 } tHsmdaSlopeHiAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tHsmdaSlopeHiAdminStatus is set to 'disabled', the RED slope is inactive." DEFVAL { enabled } ::= { tHsmdaSlopePolicyEntry 6 } tHsmdaSlopeHiStartDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeHiStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 10000 } ::= { tHsmdaSlopePolicyEntry 7 } tHsmdaSlopeHiMaxDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeHiMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 10000 } ::= { tHsmdaSlopePolicyEntry 8 } tHsmdaSlopeHiMaxProbability OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeHiMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeHiMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeHiStartDepth up to the tHsmdaSlopeHiMaxProbability at the tHsmdaSlopeHiMaxDepth." DEFVAL { 10000 } ::= { tHsmdaSlopePolicyEntry 9 } tHsmdaSlopeLoAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeLoAdminStatus specifies the admin state for the low priority RED slope. If the tHsmdaSlopeLoAdminStatus is set to 'disabled', the RED slope is inactive." DEFVAL { enabled } ::= { tHsmdaSlopePolicyEntry 10 } tHsmdaSlopeLoStartDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeLoStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 9000 } ::= { tHsmdaSlopePolicyEntry 11 } tHsmdaSlopeLoMaxDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeLoMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 9000 } ::= { tHsmdaSlopePolicyEntry 12 } tHsmdaSlopeLoMaxProbability OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSlopeLoMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeLoMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeLoStartDepth up to the tHsmdaSlopeLoMaxProbability at the tHsmdaSlopeLoMaxDepth." DEFVAL { 10000 } ::= { tHsmdaSlopePolicyEntry 13 } -- -- Scheduler policy table -- tSchedulerPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSchedulerPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tSchedulerObjects 1 } tSchedulerPolicyEntry OBJECT-TYPE SYNTAX TSchedulerPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Scheduler Policy." INDEX { IMPLIED tSchedulerPolicyName } ::= { tSchedulerPolicyTable 1 } TSchedulerPolicyEntry ::= SEQUENCE { tSchedulerPolicyName TNamedItem, tSchedulerPolicyRowStatus RowStatus, tSchedulerPolicyDescription TItemDescription, tSchedulerPolicyLastChanged TimeStamp, tSchedulerPolicyFrameBasedAccnt TruthValue } tSchedulerPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the scheduler policy." ::= { tSchedulerPolicyEntry 1 } tSchedulerPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tSchedulerPolicyEntry 2 } tSchedulerPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "Description for the scheduler policy" DEFVAL { ''H } ::= { tSchedulerPolicyEntry 3 } tSchedulerPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tSchedulerPolicyTable." ::= { tSchedulerPolicyEntry 4 } tSchedulerPolicyFrameBasedAccnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used." DEFVAL { false } ::= { tSchedulerPolicyEntry 5 } -- -- Virtual Scheduler table -- tVirtualSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF TVirtualSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tSchedulerObjects 2 } tVirtualSchedulerEntry OBJECT-TYPE SYNTAX TVirtualSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Scheduler belonging to a Scheduler Policy." INDEX { tSchedulerPolicyName, tVirtualSchedulerTier, IMPLIED tVirtualSchedulerName } ::= { tVirtualSchedulerTable 1 } TVirtualSchedulerEntry ::= SEQUENCE { tVirtualSchedulerTier INTEGER, tVirtualSchedulerName TNamedItem, tVirtualSchedulerRowStatus RowStatus, tVirtualSchedulerDescription TItemDescription, tVirtualSchedulerParent TNamedItemOrEmpty, tVirtualSchedulerLevel TLevel, tVirtualSchedulerWeight TWeight, tVirtualSchedulerCIRLevel TLevelOrDefault, tVirtualSchedulerCIRWeight TWeight, tVirtualSchedulerPIR THPolVirtualSchePIRRate, tVirtualSchedulerCIR THPolVirtualScheCIRRate, tVirtualSchedulerSummedCIR TruthValue, tVirtualSchedulerLastChanged TimeStamp, tVirtualSchedulerUsePortParent TruthValue, tVirtualSchedulerPortLvl TLevel, tVirtualSchedulerPortWght TWeight, tVirtualSchedulerPortCIRLvl TLevelOrDefault, tVirtualSchedulerPortCIRWght TWeight } tVirtualSchedulerTier OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tier to which this scheduler belongs to." ::= { tVirtualSchedulerEntry 1 } tVirtualSchedulerName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the scheduler policy." ::= { tVirtualSchedulerEntry 2 } tVirtualSchedulerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tVirtualSchedulerEntry 3 } tVirtualSchedulerDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "Description for the scheduler policy" DEFVAL { ''H } ::= { tVirtualSchedulerEntry 4 } tVirtualSchedulerParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The scheduler to which this scheduler would be feeding." DEFVAL { ''H } ::= { tVirtualSchedulerEntry 5 } tVirtualSchedulerLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tVirtualSchedulerEntry 6 } tVirtualSchedulerWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tVirtualSchedulerEntry 7 } tVirtualSchedulerCIRLevel OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic." DEFVAL { 0 } ::= { tVirtualSchedulerEntry 8 } tVirtualSchedulerCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tVirtualSchedulerEntry 9 } tVirtualSchedulerPIR OBJECT-TYPE SYNTAX THPolVirtualSchePIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The rate allowed for this scheduler. A value of -1 implies maximum." DEFVAL { -1 } ::= { tVirtualSchedulerEntry 10 } tVirtualSchedulerCIR OBJECT-TYPE SYNTAX THPolVirtualScheCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The rate allowed for this scheduler. A value of -1 implies maximum." DEFVAL { 0 } ::= { tVirtualSchedulerEntry 11 } tVirtualSchedulerSummedCIR OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning." DEFVAL { true } ::= { tVirtualSchedulerEntry 12 } tVirtualSchedulerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable." ::= { tVirtualSchedulerEntry 13 } tVirtualSchedulerUsePortParent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed." DEFVAL { false } ::= { tVirtualSchedulerEntry 14 } tVirtualSchedulerPortLvl OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tVirtualSchedulerEntry 15 } tVirtualSchedulerPortWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load." DEFVAL { 1 } ::= { tVirtualSchedulerEntry 16 } tVirtualSchedulerPortCIRLvl OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tVirtualSchedulerEntry 17 } tVirtualSchedulerPortCIRWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load." DEFVAL { 0 } ::= { tVirtualSchedulerEntry 18 } -- -- Port Scheduler plcy table -- tPortSchedulerPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF TPortSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system." ::= { tSchedulerObjects 3 } tPortSchedulerPlcyEntry OBJECT-TYPE SYNTAX TPortSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular port scheduler. Entries are created and deleted by the user." INDEX { IMPLIED tPortSchedulerPlcyName } ::= { tPortSchedulerPlcyTable 1 } TPortSchedulerPlcyEntry ::= SEQUENCE { tPortSchedulerPlcyName TNamedItem, tPortSchedulerPlcyRowStatus RowStatus, tPortSchedulerPlcyDescription TItemDescription, tPortSchedulerPlcyLastChanged TimeStamp, tPortSchedulerPlcyMaxRate TPortSchedulerPIRRate, tPortSchedulerPlcyLvl1PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl1CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl2PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl2CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl3PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl3CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl4PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl4CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl5PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl5CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl6PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl6CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl7PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl7CIR TPortSchedulerCIR, tPortSchedulerPlcyLvl8PIR TPortSchedulerPIRRate, tPortSchedulerPlcyLvl8CIR TPortSchedulerCIR, tPortSchedulerPlcyOrphanLvl TLevel, tPortSchedulerPlcyOrphanWeight TWeight, tPortSchedulerPlcyOrphanCIRLvl TLevelOrDefault, tPortSchedulerPlcyOrphanCIRWght TWeight } tPortSchedulerPlcyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tPortSchedulerPlcyName specifies the name of the port scheduler." ::= { tPortSchedulerPlcyEntry 1 } tPortSchedulerPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies." ::= { tPortSchedulerPlcyEntry 2 } tPortSchedulerPlcyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler." DEFVAL { "" } ::= { tPortSchedulerPlcyEntry 3 } tPortSchedulerPlcyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row." ::= { tPortSchedulerPlcyEntry 4 } tPortSchedulerPlcyMaxRate OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 5 } tPortSchedulerPlcyLvl1PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 6 } tPortSchedulerPlcyLvl1CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 7 } tPortSchedulerPlcyLvl2PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 8 } tPortSchedulerPlcyLvl2CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 9 } tPortSchedulerPlcyLvl3PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 10 } tPortSchedulerPlcyLvl3CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 11 } tPortSchedulerPlcyLvl4PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 12 } tPortSchedulerPlcyLvl4CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 13 } tPortSchedulerPlcyLvl5PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 14 } tPortSchedulerPlcyLvl5CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 15 } tPortSchedulerPlcyLvl6PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 16 } tPortSchedulerPlcyLvl6CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 17 } tPortSchedulerPlcyLvl7PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 18 } tPortSchedulerPlcyLvl7CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 19 } tPortSchedulerPlcyLvl8PIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 20 } tPortSchedulerPlcyLvl8CIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8." DEFVAL { -1 } ::= { tPortSchedulerPlcyEntry 21 } tPortSchedulerPlcyOrphanLvl OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir." DEFVAL { 1 } ::= { tPortSchedulerPlcyEntry 22 } tPortSchedulerPlcyOrphanWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir." DEFVAL { 0 } ::= { tPortSchedulerPlcyEntry 23 } tPortSchedulerPlcyOrphanCIRLvl OBJECT-TYPE SYNTAX TLevelOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir." DEFVAL { 0 } ::= { tPortSchedulerPlcyEntry 24 } tPortSchedulerPlcyOrphanCIRWght OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir." DEFVAL { 0 } ::= { tPortSchedulerPlcyEntry 25 } -- -- Hsmda Scheduler Policy Table -- tHsmdaSchedulerPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF THsmdaSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tHsmdaSchedulerPlcyTable has an entry for each HSMDA scheduler policy configured on this system." ::= { tSchedulerObjects 4 } tHsmdaSchedulerPlcyEntry OBJECT-TYPE SYNTAX THsmdaSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular HSMDA scheduler policy. Entries are created and deleted by the user." INDEX { tHsmdaSchedulerPlcyName } ::= { tHsmdaSchedulerPlcyTable 1} THsmdaSchedulerPlcyEntry ::= SEQUENCE { tHsmdaSchedulerPlcyName TNamedItem, tHsmdaSchedulerPlcyRowStatus RowStatus, tHsmdaSchedulerPlcyDescription TItemDescription, tHsmdaSchedulerPlcyMaxRate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl1Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl1GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl1WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl2Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl2GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl2WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl3Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl3GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl3WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl4Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl4GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl4WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl5Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl5GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl5WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl6Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl6GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl6WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl7Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl7GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl7WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLvl8Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyLvl8GrpId THsmdaSchedulerPolicyGroupId, tHsmdaSchedulerPlcyLvl8WgtInGrp THsmdaWeight, tHsmdaSchedulerPlcyLastChanged TimeStamp, tHsmdaSchedulerPlcyGrp1Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyGrp2Rate THsmdaPIRMRate, tHsmdaSchedulerPlcyBrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyGrp1BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyGrp2BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl1BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl2BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl3BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl4BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl5BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl6BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl7BrstLimit TClassBurstLimit, tHsmdaSchedulerPlcyLvl8BrstLimit TClassBurstLimit } tHsmdaSchedulerPlcyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyName specifies the name of the HSMDA scheduler policy." ::= { tHsmdaSchedulerPlcyEntry 1 } tHsmdaSchedulerPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyRowStatus is used for the creation and deletion of HSMDA scheduler policies." ::= { tHsmdaSchedulerPlcyEntry 2 } tHsmdaSchedulerPlcyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyDescription specifies the description of this HSMDA scheduling policy." ::= { tHsmdaSchedulerPlcyEntry 3 } tHsmdaSchedulerPlcyMaxRate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit, in megabits per second, of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 4 } tHsmdaSchedulerPlcyLvl1Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1GrpId. Setting tHsmdaSchedulerPlcyLvl1Rate to any value (including default) while tHsmdaSchedulerPlcyLvl1GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl1GrpId being set to default, and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 5 } tHsmdaSchedulerPlcyLvl1GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl1GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1Rate. Setting tHsmdaSchedulerPlcyLvl1GrpId to non-default value while tHsmdaSchedulerPlcyLvl1Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl1Rate being set to default. Setting tHsmdaSchedulerPlcyLvl1GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 6 } tHsmdaSchedulerPlcyLvl1WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl1WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl1GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl1GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 7 } tHsmdaSchedulerPlcyLvl2Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2GrpId. Setting tHsmdaSchedulerPlcyLvl2Rate to any value (including default) while tHsmdaSchedulerPlcyLvl2GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl2GrpId being set to default, and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 8 } tHsmdaSchedulerPlcyLvl2GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl2GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2Rate. Setting tHsmdaSchedulerPlcyLvl2GrpId to non-default value while tHsmdaSchedulerPlcyLvl2Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl2Rate being set to default. Setting tHsmdaSchedulerPlcyLvl2GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 9 } tHsmdaSchedulerPlcyLvl2WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl2WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl2GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl2GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 10 } tHsmdaSchedulerPlcyLvl3Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl3Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3GrpId. Setting tHsmdaSchedulerPlcyLvl3Rate to any value (including default) while tHsmdaSchedulerPlcyLvl3GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl3GrpId being set to default, and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 11 } tHsmdaSchedulerPlcyLvl3GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl3GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3Rate. Setting tHsmdaSchedulerPlcyLvl3GrpId to non-default value while tHsmdaSchedulerPlcyLvl3Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl3Rate being set to default. Setting tHsmdaSchedulerPlcyLvl3GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 12 } tHsmdaSchedulerPlcyLvl3WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl3WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl3GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl3GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 13 } tHsmdaSchedulerPlcyLvl4Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl4Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4GrpId. Setting tHsmdaSchedulerPlcyLvl4Rate to any value (including default) while tHsmdaSchedulerPlcyLvl4GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl4GrpId being set to default, and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 14 } tHsmdaSchedulerPlcyLvl4GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl4GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4Rate. Setting tHsmdaSchedulerPlcyLvl4GrpId to non-default value while tHsmdaSchedulerPlcyLvl4Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl4Rate being set to default. Setting tHsmdaSchedulerPlcyLvl4GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 15 } tHsmdaSchedulerPlcyLvl4WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl4WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl4GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl4GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 16 } tHsmdaSchedulerPlcyLvl5Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl5Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5GrpId. Setting tHsmdaSchedulerPlcyLvl5Rate to any value (including default) while tHsmdaSchedulerPlcyLvl5GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl5GrpId being set to default, and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 17 } tHsmdaSchedulerPlcyLvl5GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl5GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5Rate. Setting tHsmdaSchedulerPlcyLvl5GrpId to non-default value while tHsmdaSchedulerPlcyLvl5Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl5Rate being set to default. Setting tHsmdaSchedulerPlcyLvl5GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 18 } tHsmdaSchedulerPlcyLvl5WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl5WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl5GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl5GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 19 } tHsmdaSchedulerPlcyLvl6Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl6Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6GrpId. Setting tHsmdaSchedulerPlcyLvl6Rate to any value (including default) while tHsmdaSchedulerPlcyLvl6GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl6GrpId being set to default, and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 20 } tHsmdaSchedulerPlcyLvl6GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl6GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6Rate. Setting tHsmdaSchedulerPlcyLvl6GrpId to non-default value while tHsmdaSchedulerPlcyLvl6Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl6Rate being set to default. Setting tHsmdaSchedulerPlcyLvl6GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 21 } tHsmdaSchedulerPlcyLvl6WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl6WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl6GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl6GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 22 } tHsmdaSchedulerPlcyLvl7Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl7Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7GrpId. Setting tHsmdaSchedulerPlcyLvl7Rate to any value (including default) while tHsmdaSchedulerPlcyLvl7GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl7GrpId being set to default, and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 23 } tHsmdaSchedulerPlcyLvl7GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl7GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7Rate. Setting tHsmdaSchedulerPlcyLvl7GrpId to non-default value while tHsmdaSchedulerPlcyLvl7Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl7Rate being set to default. Setting tHsmdaSchedulerPlcyLvl7GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 24 } tHsmdaSchedulerPlcyLvl7WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl7WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl7GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl7GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 25 } tHsmdaSchedulerPlcyLvl8Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl8Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8GrpId. Setting tHsmdaSchedulerPlcyLvl8Rate to any value (including default) while tHsmdaSchedulerPlcyLvl8GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl8GrpId being set to default, and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 26 } tHsmdaSchedulerPlcyLvl8GrpId OBJECT-TYPE SYNTAX THsmdaSchedulerPolicyGroupId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl8GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8Rate. Setting tHsmdaSchedulerPlcyLvl8GrpId to non-default value while tHsmdaSchedulerPlcyLvl8Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl8Rate being set to default. Setting tHsmdaSchedulerPlcyLvl8GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default." DEFVAL { 0 } ::= { tHsmdaSchedulerPlcyEntry 27 } tHsmdaSchedulerPlcyLvl8WgtInGrp OBJECT-TYPE SYNTAX THsmdaWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl8WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl8GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl8GrpId is non-default." DEFVAL { 1 } ::= { tHsmdaSchedulerPlcyEntry 28 } tHsmdaSchedulerPlcyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLastChanged indicates the timestamp of last change to this row in tHsmdaSchedulerPlcyTable." ::= { tHsmdaSchedulerPlcyEntry 29 } tHsmdaSchedulerPlcyGrp1Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyGrp1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 1 for this HSMDA scheduler policy group." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 30 } tHsmdaSchedulerPlcyGrp2Rate OBJECT-TYPE SYNTAX THsmdaPIRMRate UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyGrp2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 2 for this HSMDA scheduler policy group." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 31 } tHsmdaSchedulerPlcyBrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyBrstLimit specifies the explicit shaping burst size for this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 32 } tHsmdaSchedulerPlcyGrp1BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyGrp1BrstLimit specifies the explicit shaping burst size for group 1 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 33 } tHsmdaSchedulerPlcyGrp2BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyGrp2BrstLimit specifies the explicit shaping burst size for group 2 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 34 } tHsmdaSchedulerPlcyLvl1BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl1BrstLimit specifies the explicit shaping burst size for level 1 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 35 } tHsmdaSchedulerPlcyLvl2BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl2BrstLimit specifies the explicit shaping burst size for level 2 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 36 } tHsmdaSchedulerPlcyLvl3BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl3BrstLimit specifies the explicit shaping burst size for level 3 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 37 } tHsmdaSchedulerPlcyLvl4BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl4BrstLimit specifies the explicit shaping burst size for level 4 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 38 } tHsmdaSchedulerPlcyLvl5BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl5BrstLimit specifies the explicit shaping burst size for level 5 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 39 } tHsmdaSchedulerPlcyLvl6BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl6BrstLimit specifies the explicit shaping burst size for level 6 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 40 } tHsmdaSchedulerPlcyLvl7BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl7BrstLimit specifies the explicit shaping burst size for level 7 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 41 } tHsmdaSchedulerPlcyLvl8BrstLimit OBJECT-TYPE SYNTAX TClassBurstLimit UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaSchedulerPlcyLvl8BrstLimit specifies the explicit shaping burst size for level 8 of this HSMDA scheduler policy." DEFVAL { -1 } ::= { tHsmdaSchedulerPlcyEntry 42 } -- -- Qos Domain Time Stamps -- tQosDomainLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain." ::= { tQosTimeStampObjects 1 } tDSCPNameTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table." ::= { tQosTimeStampObjects 5 } tFCNameTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table." ::= { tQosTimeStampObjects 10 } tSapIngressTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table." ::= { tQosTimeStampObjects 20 } tSapIngressQueueTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table." ::= { tQosTimeStampObjects 21 } tSapIngressDSCPTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table." ::= { tQosTimeStampObjects 22 } tSapIngressDot1pTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table." ::= { tQosTimeStampObjects 23 } tSapIngressIPCriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table." ::= { tQosTimeStampObjects 24 } tSapIngressMacCriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table." ::= { tQosTimeStampObjects 25 } tSapIngressFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table." ::= { tQosTimeStampObjects 26 } tSapIngressPrecTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table." ::= { tQosTimeStampObjects 27 } tSapEgressTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table." ::= { tQosTimeStampObjects 30 } tSapEgressQueueTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table." ::= { tQosTimeStampObjects 31 } tSapEgressFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table." ::= { tQosTimeStampObjects 32 } tNetworkPolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table." ::= { tQosTimeStampObjects 40 } tNetworkIngressDSCPTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table." ::= { tQosTimeStampObjects 41 } tNetworkIngressLSPEXPTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table." ::= { tQosTimeStampObjects 42 } tNetworkEgressFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table." ::= { tQosTimeStampObjects 43 } tNetworkIngressDot1pTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table." ::= { tQosTimeStampObjects 44 } tNetworkQueuePolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table." ::= { tQosTimeStampObjects 50 } tNetworkQueueTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table." ::= { tQosTimeStampObjects 51 } tNetworkQueueFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table." ::= { tQosTimeStampObjects 52 } tSlopePolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table." ::= { tQosTimeStampObjects 55 } tSchedulerPolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table." ::= { tQosTimeStampObjects 60 } tVirtualSchedulerTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table." ::= { tQosTimeStampObjects 61 } tAtmTdpTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table." ::= { tQosTimeStampObjects 62 } tSharedQueuePolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table." ::= { tQosTimeStampObjects 63 } tSharedQueueTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table." ::= { tQosTimeStampObjects 64 } tSharedQueueFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table." ::= { tQosTimeStampObjects 65 } tSapIngressIPv6CriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table." ::= { tQosTimeStampObjects 66 } tSapIngrHsmdaQueueTblLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "tSapIngrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Ingress HSMDA Queue Table. This object is obsoleted in 10.0 Release." ::= { tQosTimeStampObjects 67 } tSapEgrHsmdaQueueTblLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tSapEgrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Egress HSMDA Queue Table." ::= { tQosTimeStampObjects 68 } tHsmdaSchedPlcyTblLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tHsmdaSchedPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Table." ::= { tQosTimeStampObjects 69 } tHsmdaSchedPlcyGrpTblLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tHsmdaSchedPlcyGrpTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Group Table." ::= { tQosTimeStampObjects 70 } tHsmdaPoolPlcyTblLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tHsmdaPoolPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Pool Policy Table." ::= { tQosTimeStampObjects 71 } tHsmdaSlopePolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tHsmdaSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Hsmda Slope Policy Table." ::= { tQosTimeStampObjects 72 } tNamedPoolPolicyTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 73 } tQ1NamedPoolTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 74 } tMcMlpppIngrProfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 75 } tMcMlpppIngrClassTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 76 } tMcMlpppEgrProfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 77 } tMcMlpppEgrClassTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 78 } tMcMlpppEgrFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppEgrFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 79 } tMcFrIngrProfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 80 } tMcFrIngrClassTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 81 } tMcFrEgrProfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 82 } tMcFrEgrClassTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 83 } tSapIngressLspExpTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tSapIngressLspExpTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tSapIngressLspExpTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tQosTimeStampObjects 84 } -- -- Atm Traffic Descriptor Table -- tAtmTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF TAtmTdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities." ::= { tAtmTdpObjects 1} tAtmTdpEntry OBJECT-TYPE SYNTAX TAtmTdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero." INDEX {tAtmTdpIndex} ::= { tAtmTdpTable 1} TAtmTdpEntry ::= SEQUENCE { tAtmTdpIndex AtmTrafficDescrParamIndex, tAtmTdpSir Unsigned32, tAtmTdpPir Unsigned32, tAtmTdpMbs Unsigned32, tAtmTdpMir Unsigned32, tAtmTdpShaping INTEGER, tAtmTdpServCat AtmServiceCategory, tAtmTdpDescription TItemDescription, tAtmTdpLastChanged TimeStamp, tAtmTdpRowStatus RowStatus, tAtmTdpDescrType TAtmTdpDescrType, tAtmTdpCdvt Unsigned32, tAtmTdpPolicing INTEGER, tAtmTdpCLPTagging INTEGER, tAtmTdpWeight Integer32 } tAtmTdpIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext." ::= { tAtmTdpEntry 1 } tAtmTdpSir OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir." ::= { tAtmTdpEntry 2 } tAtmTdpPir OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0" ::= { tAtmTdpEntry 3 } tAtmTdpMbs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32" ::= { tAtmTdpEntry 4 } tAtmTdpMir OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir." ::= { tAtmTdpEntry 5 } tAtmTdpShaping OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction." ::= { tAtmTdpEntry 6 } tAtmTdpServCat OBJECT-TYPE SYNTAX AtmServiceCategory MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpServCat determines the ATM service category." DEFVAL { ubr } ::= { tAtmTdpEntry 7 } tAtmTdpDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor." ::= { tAtmTdpEntry 8 } tAtmTdpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table." ::= { tAtmTdpEntry 9 } tAtmTdpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported" ::= { tAtmTdpEntry 10 } tAtmTdpDescrType OBJECT-TYPE SYNTAX TAtmTdpDescrType MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr" ::= { tAtmTdpEntry 11 } tAtmTdpCdvt OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250 " ::= { tAtmTdpEntry 12 } tAtmTdpPolicing OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR" ::= { tAtmTdpEntry 13 } tAtmTdpCLPTagging OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one." DEFVAL { 0 } ::= { tAtmTdpEntry 14 } tAtmTdpWeight OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAtmTdpWeight specifies the relative weight assigned to this ATM traffic descriptor with respect to ATM VP shaper scheduling. The value of tAtmTdpWeight is only relevant for MDA where the value of TIMETRA-CHASSIS-MIB::tmnxMDAAtmMode is equal to max16kVc, and is ignored otherwise. If the value of tAtmTdpWeight is not specified when the conceptual row is created, the weight is derived from the ATM service category: CBR 10 rt-VBR 7 nrt-VBR 5 UBR+ (nonzero MIR) 2 UBR (zero MIR) 1." ::= { tAtmTdpEntry 15 } -- -- Named Pool Policy Table -- tNamedPoolPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TNamedPoolPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on Named buffer pools policy." ::= { tPoolObjects 1 } tNamedPoolPolicyEntry OBJECT-TYPE SYNTAX TNamedPoolPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains Named buffer pools policy related information." INDEX {tNamedPoolPolicyName} ::= { tNamedPoolPolicyTable 1} TNamedPoolPolicyEntry ::= SEQUENCE { tNamedPoolPolicyName TNamedItem, tNamedPoolPolicyRowStatus RowStatus, tNamedPoolPolicyLastChanged TimeStamp, tNamedPoolPolicyDescription TItemDescription, tNamedPoolPolicyQ1DefaultWeight Unsigned32, tNamedPoolPolicyQ1MdaWeight Unsigned32, tNamedPoolPolicyQ1PortWeight Unsigned32 } tNamedPoolPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tNamedPoolPolicyName indicates the name of Named pool policy." ::= { tNamedPoolPolicyEntry 1 } tNamedPoolPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies." ::= { tNamedPoolPolicyEntry 2 } tNamedPoolPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified." ::= { tNamedPoolPolicyEntry 3 } tNamedPoolPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy." DEFVAL { "" } ::= { tNamedPoolPolicyEntry 4 } tNamedPoolPolicyQ1DefaultWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools." DEFVAL { 50 } ::= { tNamedPoolPolicyEntry 5 } tNamedPoolPolicyQ1MdaWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools." DEFVAL { 50 } ::= { tNamedPoolPolicyEntry 6 } tNamedPoolPolicyQ1PortWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools." DEFVAL { 50 } ::= { tNamedPoolPolicyEntry 7 } -- -- Q1 Named Pool Table -- tQ1NamedPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF TQ1NamedPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on Q1 pools policy." ::= { tPoolObjects 2 } tQ1NamedPoolEntry OBJECT-TYPE SYNTAX TQ1NamedPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains Q1 pools policy related information." INDEX {tQ1NamedPoolPolicyName, tQ1NamedPoolName} ::= { tQ1NamedPoolTable 1} TQ1NamedPoolEntry ::= SEQUENCE { tQ1NamedPoolPolicyName TNamedItem, tQ1NamedPoolName TNamedItem, tQ1NamedPoolRowStatus RowStatus, tQ1NamedPoolLastChanged TimeStamp, tQ1NamedPoolDescription TItemDescription, tQ1NamedPoolNetworkAllocWeight Unsigned32, tQ1NamedPoolAccessAllocWeight Unsigned32, tQ1NamedPoolSlopePolicy TNamedItemOrEmpty, tQ1NamedPoolReservedCbs Integer32, tQ1NamedPoolResvCbsAmbrAlrmStep Integer32, tQ1NamedPoolResvCbsAmbrAlrmMax Integer32, tQ1NamedPoolAmbrAlrmThresh Integer32, tQ1NamedPoolRedAlrmThresh Integer32 } tQ1NamedPoolPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy." ::= { tQ1NamedPoolEntry 1 } tQ1NamedPoolName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQ1NamedPoolName indicates the name of the existing pool within the policy." ::= { tQ1NamedPoolEntry 2 } tQ1NamedPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools." ::= { tQ1NamedPoolEntry 3 } tQ1NamedPoolLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified. " ::= { tQ1NamedPoolEntry 4 } tQ1NamedPoolDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool." DEFVAL { "" } ::= { tQ1NamedPoolEntry 5 } tQ1NamedPoolNetworkAllocWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools." DEFVAL { 50 } ::= { tQ1NamedPoolEntry 6 } tQ1NamedPoolAccessAllocWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools." DEFVAL { 50 } ::= { tQ1NamedPoolEntry 7 } tQ1NamedPoolSlopePolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool." DEFVAL { ''H } ::= { tQ1NamedPoolEntry 8 } tQ1NamedPoolReservedCbs OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared." DEFVAL { 30 } ::= { tQ1NamedPoolEntry 9 } tQ1NamedPoolResvCbsAmbrAlrmStep OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolResvCbsAmbrAlrmStep specifies the percentage step-size for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmStep is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmStep MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmMax. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared." DEFVAL { 0 } ::= { tQ1NamedPoolEntry 10 } tQ1NamedPoolResvCbsAmbrAlrmMax OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolResvCbsAmbrAlrmMax specifies the maximum percentage for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmMax is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmMax MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmStep. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared. Max reserved CBS must not be more than the reserved CBS." DEFVAL { 0 } ::= { tQ1NamedPoolEntry 11 } tQ1NamedPoolAmbrAlrmThresh OBJECT-TYPE SYNTAX Integer32 (0..1000) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolAmbrAlrmThresh specifies the threshold for the amber alarm on the over-subscription allowed." DEFVAL { 0 } ::= { tQ1NamedPoolEntry 12 } tQ1NamedPoolRedAlrmThresh OBJECT-TYPE SYNTAX Integer32 (0..1000) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQ1NamedPoolRedAlrmThresh specifies the threshold for the red alarm on the over-subscription allowed." DEFVAL { 0 } ::= { tQ1NamedPoolEntry 13 } -- -- The following object may be used in conjunction with -- the atmTrafficDescrParamTable for the creation of -- new table entries. -- tAtmTdpIndexNext OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { tAtmTdpObjects 2 } --- --- The following objects are to be used in --- conjunction with the tAtmTdpTable --- for information on profile limits and consumed --- profiles. --- tAtmTdpsMaxSupported OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system." ::= { tAtmTdpObjects 3 } tAtmTdpsCurrentlyConfigured OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system." ::= { tAtmTdpObjects 4 } -- -- Hsmda Pool Policy Table -- tHsmdaPoolPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF THsmdaPoolPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tHsmdaPoolPolicyTable has an entry for each HSMDA pool policy configured on this system." ::= { tPoolObjects 3 } tHsmdaPoolPolicyEntry OBJECT-TYPE SYNTAX THsmdaPoolPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular HSMDA pool policy. Entries are created and deleted by the user." INDEX { tHsmdaPoolPolicyName } ::= { tHsmdaPoolPolicyTable 1} THsmdaPoolPolicyEntry ::= SEQUENCE { tHsmdaPoolPolicyName TNamedItem, tHsmdaPoolPolicyRowStatus RowStatus, tHsmdaPoolLastChanged TimeStamp, tHsmdaPoolDescription TItemDescription, tHsmdaPoolSystemReserve Unsigned32, tHsmdaPoolRoot1AllocWeight TWeight, tHsmdaPoolRoot2AllocWeight TWeight, tHsmdaPoolRoot3AllocWeight TWeight, tHsmdaPoolRoot4AllocWeight TWeight, tHsmdaPoolRoot5AllocWeight TWeight, tHsmdaPoolRoot6AllocWeight TWeight, tHsmdaPoolRoot7AllocWeight TWeight, tHsmdaPoolRoot8AllocWeight TWeight, tHsmdaPoolClass1Parent Unsigned32, tHsmdaPoolClass1AllocPercent Unsigned32, tHsmdaPoolClass2Parent Unsigned32, tHsmdaPoolClass2AllocPercent Unsigned32, tHsmdaPoolClass3Parent Unsigned32, tHsmdaPoolClass3AllocPercent Unsigned32, tHsmdaPoolClass4Parent Unsigned32, tHsmdaPoolClass4AllocPercent Unsigned32, tHsmdaPoolClass5Parent Unsigned32, tHsmdaPoolClass5AllocPercent Unsigned32, tHsmdaPoolClass6Parent Unsigned32, tHsmdaPoolClass6AllocPercent Unsigned32, tHsmdaPoolClass7Parent Unsigned32, tHsmdaPoolClass7AllocPercent Unsigned32, tHsmdaPoolClass8Parent Unsigned32, tHsmdaPoolClass8AllocPercent Unsigned32 } tHsmdaPoolPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tHsmdaPoolPolicyName specifies the name of the HSMDA pool policy." ::= { tHsmdaPoolPolicyEntry 1 } tHsmdaPoolPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolPolicyRowStatus is used for the creation and deletion of HSMDA pool policies." ::= { tHsmdaPoolPolicyEntry 2 } tHsmdaPoolLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tHsmdaPoolLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tHsmdaPoolPolicyEntry 3 } tHsmdaPoolDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolDescription specifies the description of this HSMDA pool policy." DEFVAL { "" } ::= { tHsmdaPoolPolicyEntry 4 } tHsmdaPoolSystemReserve OBJECT-TYPE SYNTAX Unsigned32 (100..3000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolSystemReserve specifies the percentage of HSMDA buffers that will be reserved for internal system use. When this value is set, all the provisioned buffer pool allocation sizes will be re-evaluated. This includes the port class allocations specified by indirectly by tmnxPortIngPoolPercentRate and tmnxPortEgrPoolPercentRate, and class and root pools specified indirectly by tHsmdaPoolClass1AllocPercent through tHsmdaPoolClass8AllocPercent and tHsmdaPoolRoot1AllocWeight through tHsmdaPoolRoot8AllocWeight." DEFVAL { 1000 } ::= { tHsmdaPoolPolicyEntry 5 } tHsmdaPoolRoot1AllocWeight OBJECT-TYPE SYNTAX TWeight (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot1AllocWeight specifies the weight that will be applied to the first root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 75 } ::= { tHsmdaPoolPolicyEntry 6 } tHsmdaPoolRoot2AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot2AllocWeight specifies the weight that will be applied to the second root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 25 } ::= { tHsmdaPoolPolicyEntry 7 } tHsmdaPoolRoot3AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot3AllocWeight specifies the weight that will be applied to the third root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 0 } ::= { tHsmdaPoolPolicyEntry 8 } tHsmdaPoolRoot4AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot4AllocWeight specifies the weight that will be applied to the fourth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 0 } ::= { tHsmdaPoolPolicyEntry 9 } tHsmdaPoolRoot5AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot5AllocWeight specifies the weight that will be applied to the fifth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 0 } ::= { tHsmdaPoolPolicyEntry 10 } tHsmdaPoolRoot6AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot6AllocWeight specifies the weight that will be applied to the sixth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 0 } ::= { tHsmdaPoolPolicyEntry 11 } tHsmdaPoolRoot7AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot7AllocWeight specifies the weight that will be applied to the seventh root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 0 } ::= { tHsmdaPoolPolicyEntry 12 } tHsmdaPoolRoot8AllocWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolRoot8AllocWeight specifies the weight that will be applied to the eighth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor." DEFVAL { 0 } ::= { tHsmdaPoolPolicyEntry 13 } tHsmdaPoolClass1Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass1Parent specifies the root pool to which the first class pool will be associated." DEFVAL { 1 } ::= { tHsmdaPoolPolicyEntry 14 } tHsmdaPoolClass1AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass1AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass1Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 4000 } ::= { tHsmdaPoolPolicyEntry 15 } tHsmdaPoolClass2Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass2Parent specifies the root pool to which the second class pool will be associated." DEFVAL { 1 } ::= { tHsmdaPoolPolicyEntry 16 } tHsmdaPoolClass2AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass2AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass2Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 3500 } ::= { tHsmdaPoolPolicyEntry 17 } tHsmdaPoolClass3Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass3Parent specifies the root pool to which the third class pool will be associated." DEFVAL { 1 } ::= { tHsmdaPoolPolicyEntry 18 } tHsmdaPoolClass3AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass3AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass3Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 3000 } ::= { tHsmdaPoolPolicyEntry 19 } tHsmdaPoolClass4Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass4Parent specifies the root pool to which the fourth class pool will be associated." DEFVAL { 1 } ::= { tHsmdaPoolPolicyEntry 20 } tHsmdaPoolClass4AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass4AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass4Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 2500 } ::= { tHsmdaPoolPolicyEntry 21 } tHsmdaPoolClass5Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass5Parent specifies the root pool to which the fifth class pool will be associated." DEFVAL { 1 } ::= { tHsmdaPoolPolicyEntry 22 } tHsmdaPoolClass5AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass5AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass5Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 2000 } ::= { tHsmdaPoolPolicyEntry 23 } tHsmdaPoolClass6Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass6Parent specifies the root pool to which the sixth class pool will be associated." DEFVAL { 2 } ::= { tHsmdaPoolPolicyEntry 24 } tHsmdaPoolClass6AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass6AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass6Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 5000 } ::= { tHsmdaPoolPolicyEntry 25 } tHsmdaPoolClass7Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass7Parent specifies the root pool to which the seventh class pool will be associated." DEFVAL { 2 } ::= { tHsmdaPoolPolicyEntry 26 } tHsmdaPoolClass7AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass7AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass7Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 4000 } ::= { tHsmdaPoolPolicyEntry 27 } tHsmdaPoolClass8Parent OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass8Parent specifies the root pool to which the eigth class pool will be associated." DEFVAL { 2 } ::= { tHsmdaPoolPolicyEntry 28 } tHsmdaPoolClass8AllocPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaPoolClass8AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass8Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed." DEFVAL { 3000 } ::= { tHsmdaPoolPolicyEntry 29 } -- -- Multi-class mlppp Ingress profile table -- tMcMlpppIngrProfTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcMlpppIngrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcMlpppIngrProfTable has an entry for each ingress multi-class mlppp profile configured in the system." ::= { tMcMlpppIngressObjects 1 } tMcMlpppIngrProfEntry OBJECT-TYPE SYNTAX TMcMlpppIngrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains information about a particular ingress multi-class mlppp profile. Multi-class mlppp ingress profile 1 is created by the agent. It cannot be deleted. Other entries are created by the user." INDEX { tMcMlpppIngrProfIndex } ::= { tMcMlpppIngrProfTable 1 } TMcMlpppIngrProfEntry ::= SEQUENCE { tMcMlpppIngrProfIndex TMlpppQoSProfileId, tMcMlpppIngrProfDescription TItemDescription, tMcMlpppIngrProfLastChanged TimeStamp, tMcMlpppIngrProfRowStatus RowStatus } tMcMlpppIngrProfIndex OBJECT-TYPE SYNTAX TMlpppQoSProfileId (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcMlpppIngrProfIndex specifies a specific multi-class ingress profile." ::= { tMcMlpppIngrProfEntry 1 } tMcMlpppIngrProfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcMlpppIngrProfDescription holds the description for this profile." DEFVAL { ''H } ::= { tMcMlpppIngrProfEntry 2 } tMcMlpppIngrProfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppIngrProfTable indicates the sysUpTime for the last change to this row." ::= { tMcMlpppIngrProfEntry 3 } tMcMlpppIngrProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcMlpppIngrProfRowStatus controls the creation and deletion of rows in this table." ::= { tMcMlpppIngrProfEntry 4 } -- -- Multi-class mlppp ingress class table -- tMcMlpppIngrClassTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcMlpppIngrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcMlpppIngrClassTable has an entry for each multi-class mlppp ingress class per multi-class mlppp ingress profile in the system." ::= { tMcMlpppIngressObjects 2 } tMcMlpppIngrClassEntry OBJECT-TYPE SYNTAX TMcMlpppIngrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a particular mlppp ingress multi-class class per mlppp ingress profile. Entries are created/destroyed as each tMcMlpppIngrProfEntry is created/destroyed." INDEX { tMcMlpppIngrProfIndex, tMcMlpppIngrClassIndex } ::= { tMcMlpppIngrClassTable 1 } TMcMlpppIngrClassEntry ::= SEQUENCE { tMcMlpppIngrClassIndex TmnxMcMlpppClassIndex, tMcMlpppIngrClassReassemblyTmout Unsigned32, tMcMlpppIngrClassLastChanged TimeStamp } tMcMlpppIngrClassIndex OBJECT-TYPE SYNTAX TmnxMcMlpppClassIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcMlpppIngrClassIndex specifies a specific mlppp ingress class per multi-class mlppp ingress profile." ::= { tMcMlpppIngrClassEntry 1 } tMcMlpppIngrClassReassemblyTmout OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcMlpppIngrClassReassemblyTmout specifies the reassembly timeout for a specific mlppp multi-class ingress class. The default reassembly timeout value is determined by the tMcMlpppIngrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppIngrClassIndex Default Reassembly Value 0 10 1 10 2 100 3 1000" ::= { tMcMlpppIngrClassEntry 2 } tMcMlpppIngrClassLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppIngrClassLastChanged indicates the sysUpTime for the last change to this entry." ::= { tMcMlpppIngrClassEntry 3 } -- -- Multi-class mlppp egress profile table -- tMcMlpppEgrProfTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcMlpppEgrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcMlpppEgrProfTable has an entry for each egress multi-class mlppp profile configured in the system." ::= { tMcMlpppEgressObjects 1 } tMcMlpppEgrProfEntry OBJECT-TYPE SYNTAX TMcMlpppEgrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains information about a particular egress multi-class mlppp profile. Multi-class mlppp egress profiles 1,2 and 3 are created by the agent. They cannot be deleted. Other entries are created by the user." INDEX { tMcMlpppEgrProfIndex } ::= { tMcMlpppEgrProfTable 1 } TMcMlpppEgrProfEntry ::= SEQUENCE { tMcMlpppEgrProfIndex TMlpppQoSProfileId, tMcMlpppEgrProfDescription TItemDescription, tMcMlpppEgrProfLastChanged TimeStamp, tMcMlpppEgrProfRowStatus RowStatus } tMcMlpppEgrProfIndex OBJECT-TYPE SYNTAX TMlpppQoSProfileId (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcMlpppEgrProfIndex specifies a specific multi-class egress profile." ::= { tMcMlpppEgrProfEntry 1 } tMcMlpppEgrProfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcMlpppEgrProfDescription holds the description for this profile." DEFVAL { ''H } ::= { tMcMlpppEgrProfEntry 2 } tMcMlpppEgrProfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppEgrProfLastChanged indicates the sysUpTime for the last change to this row." ::= { tMcMlpppEgrProfEntry 3 } tMcMlpppEgrProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcMlpppEgrProfRowStatus controls the creation and deletion of rows in this table." ::= { tMcMlpppEgrProfEntry 4 } -- -- Multi-class mlppp egress class table -- tMcMlpppEgrClassTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcMlpppEgrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcMlpppEgrClassTable has an entry for each multiclass mlppp egress profile in the system." ::= { tMcMlpppEgressObjects 3 } tMcMlpppEgrClassEntry OBJECT-TYPE SYNTAX TMcMlpppEgrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a particular mlppp egress multi-class class per mlppp multi-class mlppp egress profile. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed." INDEX { tMcMlpppEgrProfIndex, tMcMlpppEgrClassIndex } ::= { tMcMlpppEgrClassTable 1 } TMcMlpppEgrClassEntry ::= SEQUENCE { tMcMlpppEgrClassIndex TmnxMcMlpppClassIndex, tMcMlpppEgrClassMir Unsigned32, tMcMlpppEgrClassWeight Unsigned32, tMcMlpppEgrClassMaxSize Unsigned32, tMcMlpppEgrClassLastChanged TimeStamp } tMcMlpppEgrClassIndex OBJECT-TYPE SYNTAX TmnxMcMlpppClassIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcMlpppEgrClassIndex specifies a specific mlppp egress class per multi-class mlppp egress profile." ::= { tMcMlpppEgrClassEntry 1 } tMcMlpppEgrClassMir OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcMlpppEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. The default Mir is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Mir Value 0 100 1 85 2 0 3 0" ::= { tMcMlpppEgrClassEntry 2 } tMcMlpppEgrClassWeight OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. The default Weight is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Weight Value 0 0 1 0 2 66 3 33" ::= { tMcMlpppEgrClassEntry 3 } tMcMlpppEgrClassMaxSize OBJECT-TYPE SYNTAX Unsigned32 (1..1000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcMlpppEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Max Size 0 25 1 5 2 200 3 1000" ::= { tMcMlpppEgrClassEntry 4 } tMcMlpppEgrClassLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppEgrClassLastChanged indicates the sysUpTime for the last change to this entry." ::= { tMcMlpppEgrClassEntry 5 } -- -- Multi-class mlppp egress fc table -- tMcMlpppEgrFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcMlpppEgrFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcMlpppEgrFCTable has an entry for all egress FC Mappings to multi-class mlppp classes." ::= { tMcMlpppEgressObjects 4 } tMcMlpppEgrFCEntry OBJECT-TYPE SYNTAX TMcMlpppEgrFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about all egress FC Mappings to multi-class mlppp classes. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed." INDEX { tMcMlpppEgrProfIndex, tMcMlpppEgrFCName } ::= { tMcMlpppEgrFCTable 1 } TMcMlpppEgrFCEntry ::= SEQUENCE { tMcMlpppEgrFCName TFCName, tMcMlpppEgrFCClass Unsigned32, tMcMlpppEgrFCLastChanged TimeStamp } tMcMlpppEgrFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value tMcMlpppEgrFCName specifies of the name of the forwarding class." ::= { tMcMlpppEgrFCEntry 1 } tMcMlpppEgrFCClass OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcMlpppEgrFCClass specifies the mlppp multi-class class for the per-forwarding-class specified. The default class value is determined by the Forwarding Class Name. Forwarding Class Name Mlppp Class Value be 3 l2 2 af 2 l1 2 h2 2 ef 1 h1 0 nc 0" ::= { tMcMlpppEgrFCEntry 2 } tMcMlpppEgrFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcMlpppEgrFCLastChanged indicates the sysUpTime for the last change to this entry." ::= { tMcMlpppEgrFCEntry 3 } -- -- Multi-class Frame-Relay Ingress profile table -- tMcFrIngrProfTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcFrIngrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcFrIngrProfTable has an entry for each ingress multi-class frame-relay profile configured in the system." ::= { tMcFrIngressObjects 1 } tMcFrIngrProfEntry OBJECT-TYPE SYNTAX TMcFrIngrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains information about a particular ingress multi-class frame-relay profile. Multi-class frame-relay ingress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user." INDEX { tMcFrIngrProfIndex } ::= { tMcFrIngrProfTable 1 } TMcFrIngrProfEntry ::= SEQUENCE { tMcFrIngrProfIndex TMcFrQoSProfileId, tMcFrIngrProfDescription TItemDescription, tMcFrIngrProfLastChanged TimeStamp, tMcFrIngrProfRowStatus RowStatus } tMcFrIngrProfIndex OBJECT-TYPE SYNTAX TMcFrQoSProfileId (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcFrIngrProfIndex specifies a specific multi-class ingress profile." ::= { tMcFrIngrProfEntry 1 } tMcFrIngrProfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcFrIngrProfDescription holds the description for this profile." DEFVAL { ''H } ::= { tMcFrIngrProfEntry 2 } tMcFrIngrProfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrIngrProfTable indicates the sysUpTime for the last change to this row." ::= { tMcFrIngrProfEntry 3 } tMcFrIngrProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcFrIngrProfRowStatus controls the creation and deletion of rows in this table." ::= { tMcFrIngrProfEntry 4 } -- -- Multi-class Frame-Relay ingress class table -- tMcFrIngrClassTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcFrIngrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcFrIngrClassTable has an entry for each multi-class frame-relay ingress class per multi-class frame-relay ingress profile in the system." ::= { tMcFrIngressObjects 2 } tMcFrIngrClassEntry OBJECT-TYPE SYNTAX TMcFrIngrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a particular frame-relay ingress multi-class class per frame-relay ingress profile. Entries are created/destroyed as each tMcFrIngrProfEntry is created/destroyed." INDEX { tMcFrIngrProfIndex, tMcFrIngrClassIndex } ::= { tMcFrIngrClassTable 1 } TMcFrIngrClassEntry ::= SEQUENCE { tMcFrIngrClassIndex TmnxMcFrClassIndex, tMcFrIngrClassReassemblyTmout Unsigned32, tMcFrIngrClassLastChanged TimeStamp } tMcFrIngrClassIndex OBJECT-TYPE SYNTAX TmnxMcFrClassIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcFrIngrClassIndex specifies a specific frame-relay ingress class per multi-class frame-relay ingress profile." ::= { tMcFrIngrClassEntry 1 } tMcFrIngrClassReassemblyTmout OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcFrIngrClassReassemblyTmout specifies the reassembly timeout for a specific frame-relay multi-class ingress class. Currently only four multi-class classes are supported per profile." ::= { tMcFrIngrClassEntry 2 } tMcFrIngrClassLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrIngrClassLastChanged indicates the sysUpTime for the last change to this entry." ::= { tMcFrIngrClassEntry 3 } -- -- Multi-class Frame-Relay egress profile table -- tMcFrEgrProfTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcFrEgrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcFrEgrProfTable has an entry for each egress multi-class frame-relay profile configured in the system." ::= { tMcFrEgressObjects 1 } tMcFrEgrProfEntry OBJECT-TYPE SYNTAX TMcFrEgrProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains information about a particular egress multi-class frame-relay profile. Multi-class frame-relay egress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user." INDEX { tMcFrEgrProfIndex } ::= { tMcFrEgrProfTable 1 } TMcFrEgrProfEntry ::= SEQUENCE { tMcFrEgrProfIndex TMcFrQoSProfileId, tMcFrEgrProfDescription TItemDescription, tMcFrEgrProfLastChanged TimeStamp, tMcFrEgrProfRowStatus RowStatus } tMcFrEgrProfIndex OBJECT-TYPE SYNTAX TMcFrQoSProfileId (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcFrEgrProfIndex specifies a specific multi-class egress profile." ::= { tMcFrEgrProfEntry 1 } tMcFrEgrProfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcFrEgrProfDescription holds the description for this profile." DEFVAL { ''H } ::= { tMcFrEgrProfEntry 2 } tMcFrEgrProfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrEgrProfLastChanged indicates the sysUpTime for the last change to this row." ::= { tMcFrEgrProfEntry 3 } tMcFrEgrProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tMcFrEgrProfRowStatus controls the creation and deletion of rows in this table." ::= { tMcFrEgrProfEntry 4 } -- -- Multi-class Frame-Relay egress class table -- tMcFrEgrClassTable OBJECT-TYPE SYNTAX SEQUENCE OF TMcFrEgrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMcFrEgrClassTable has an entry for each multiclass mlppp egress profile in the system." ::= { tMcFrEgressObjects 3 } tMcFrEgrClassEntry OBJECT-TYPE SYNTAX TMcFrEgrClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a particular frame-relay egress multi-class class per multi-class frame-relay egress profile. Entries are created/destroyed as each tMcFrEgrProfEntry is created/destroyed." INDEX { tMcFrEgrProfIndex, tMcFrEgrClassIndex } ::= { tMcFrEgrClassTable 1 } TMcFrEgrClassEntry ::= SEQUENCE { tMcFrEgrClassIndex TmnxMcFrClassIndex, tMcFrEgrClassMir Unsigned32, tMcFrEgrClassWeight Unsigned32, tMcFrEgrClassMaxSize Unsigned32, tMcFrEgrClassLastChanged TimeStamp } tMcFrEgrClassIndex OBJECT-TYPE SYNTAX TmnxMcFrClassIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tMcFrEgrClassIndex specifies a specific frame-relay egress class per multi-class frame-relay egress profile." ::= { tMcFrEgrClassEntry 1 } tMcFrEgrClassMir OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcFrEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile." ::= { tMcFrEgrClassEntry 2 } tMcFrEgrClassWeight OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile." ::= { tMcFrEgrClassEntry 3 } tMcFrEgrClassMaxSize OBJECT-TYPE SYNTAX Unsigned32 (1..1000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tMcFrEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcFrEgrClassIndex value. Currently only four multi-class classes are supported per profile." ::= { tMcFrEgrClassEntry 4 } tMcFrEgrClassLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tMcFrEgrClassLastChanged indicates the sysUpTime for the last change to this entry." ::= { tMcFrEgrClassEntry 5 } -- -------------------------------- -- QoS Policer Control Policy table -- -------------------------------- tQosPolicerCtrlPolTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosPolicerCtrlPolTblLastChgd indicates the timestamp of last change to the tQosPolicerCtrlPolTable." ::= { tQosTimeStampObjects 87 } tQosPolicerCtrlPolTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosPolicerCtrlPolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosPolicerCtrlPolTable defines all egress queues." ::= { tQosPolicerObjects 1 } tQosPolicerCtrlPolEntry OBJECT-TYPE SYNTAX TQosPolicerCtrlPolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosPolicerCtrlPolEntry defines a particular egress queue. Entries are created and deleted by user." INDEX { tQosPolicerCtrlPolName } ::= { tQosPolicerCtrlPolTable 1 } TQosPolicerCtrlPolEntry ::= SEQUENCE { tQosPolicerCtrlPolName TNamedItem, tQosPolicerCtrlPolRowStatus RowStatus, tQosPolicerCtrlPolLastChgd TimeStamp, tQosPolicerCtrlPolDescr TItemDescription, tQosPolicerCtrlPolRootMaxRate THPolPIRRate, tQosPolicerCtrlPolMinMBSSep TPlcrBurstSizeBytes, tQosPolicerCtrlPolProfPref TruthValue } tQosPolicerCtrlPolName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQosPolicerCtrlPolName identifies the name of the policer control policy." ::= { tQosPolicerCtrlPolEntry 1 } tQosPolicerCtrlPolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tQosPolicerCtrlPolEntry 2 } tQosPolicerCtrlPolLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQosPolicerCtrlPolLastChgd indicates the timestamp of last change to this row in tQosPolicerCtrlPolTable." ::= { tQosPolicerCtrlPolEntry 3 } tQosPolicerCtrlPolDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerCtrlPolDescr specifies the description for the policer control policy." DEFVAL { ''H } ::= { tQosPolicerCtrlPolEntry 4 } tQosPolicerCtrlPolRootMaxRate OBJECT-TYPE SYNTAX THPolPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerCtrlPolRootMaxRate specifies the maximum frame based bandwidth limit of this policer." DEFVAL { -1 } ::= { tQosPolicerCtrlPolEntry 5 } tQosPolicerCtrlPolMinMBSSep OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerCtrlPolMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer." DEFVAL { -1 } ::= { tQosPolicerCtrlPolEntry 6 } tQosPolicerCtrlPolProfPref OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerCtrlPolProfPref specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer. When the value of this object is set to 'true', preferred profile is applied to this policy. When the value is set to 'false', no preffered profile is set to this policy." DEFVAL { false } ::= { tQosPolicerCtrlPolEntry 7 } -- ---------------------------------- -- Policer Control Policy Level Table -- ---------------------------------- tQosPolicerLevelTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosPolicerLevelTblLastChgd indicates the timestamp of last change to the tQosPolicerLevelTable." ::= { tQosTimeStampObjects 88 } tQosPolicerLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosPolicerLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosPolicerLevelTable defines all levels of QoS Policer control policy defined by tQosPolicerCtrlPolTable." ::= { tQosPolicerObjects 2 } tQosPolicerLevelEntry OBJECT-TYPE SYNTAX TQosPolicerLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosPolicerLevelEntry defines a specific level of QoS policer control policy defined by tQosPolicerCtrlPolTable. Entries are created and deleted by the system when QoS policer control policy is created and deleted." INDEX { tQosPolicerCtrlPolName, tQosPolicerLevel } ::= { tQosPolicerLevelTable 1 } TQosPolicerLevelEntry ::= SEQUENCE { tQosPolicerLevel TLevel, tQosPolicerLevelLastChgd TimeStamp, tQosPolicerLevelCumMBS TPlcrBurstSizeBytes, tQosPolicerLevelFixedMBS TruthValue } tQosPolicerLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQosPolicerLevel identifies the level of the policer control policy defined by tQosPolicerCtrlPolName." ::= { tQosPolicerLevelEntry 1 } tQosPolicerLevelLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQosPolicerLevelLastChgd indicates the timestamp of last change to this row in tQosPolicerLevelTable." ::= { tQosPolicerLevelEntry 2 } tQosPolicerLevelCumMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerLevelCumMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by this policer." DEFVAL { -1 } ::= { tQosPolicerLevelEntry 3 } tQosPolicerLevelFixedMBS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerLevelFixedMBS specifies whether the cumulative buffer space is fixed for this level. When the value of this object is set to 'true', cumulative buffer space for this level is fixed. When the value is set to 'false', cumulative buffer space for this level is not fixed." DEFVAL { false } ::= { tQosPolicerLevelEntry 4 } -- -------------------------------- -- QoS Policer Arbiter table -- -------------------------------- tQosPolicerArbiterTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosPolicerArbiterTblLastChgd indicates the timestamp of last change to the tQosPolicerArbiterTable." ::= { tQosTimeStampObjects 89 } tQosPolicerArbiterTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosPolicerArbiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosPolicerArbiterTable defines policy arbiters for all policer control policies." ::= { tQosPolicerObjects 3 } tQosPolicerArbiterEntry OBJECT-TYPE SYNTAX TQosPolicerArbiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosPolicerArbiterEntry defines a particular policy arbiter for a specific QoS policer control policy on a given tier. Entries are created and deleted by user." INDEX { tQosPolicerCtrlPolName, tQosPolicerArbiterTier, tQosPolicerArbiterName } ::= { tQosPolicerArbiterTable 1 } TQosPolicerArbiterEntry ::= SEQUENCE { tQosPolicerArbiterTier INTEGER, tQosPolicerArbiterName TNamedItem, tQosPolicerArbiterRowStatus RowStatus, tQosPolicerArbiterLastChgd TimeStamp, tQosPolicerArbiterDescr TItemDescription, tQosPolicerArbiterRate THPolPIRRate, tQosPolicerArbiterParent TNamedItemOrEmpty, tQosPolicerArbiterLevel TLevel, tQosPolicerArbiterWeight TPolicerWeight } tQosPolicerArbiterTier OBJECT-TYPE SYNTAX INTEGER { tier1 (1), tier2 (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQosPolicerArbiterTier identifies the tier of the policer control policy arbiter." ::= { tQosPolicerArbiterEntry 1 } tQosPolicerArbiterName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQosPolicerArbiterName identifies the name of the policer control policy arbiter." ::= { tQosPolicerArbiterEntry 2 } tQosPolicerArbiterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tQosPolicerArbiterEntry 3 } tQosPolicerArbiterLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tQosPolicerArbiterLastChgd indicates the timestamp of last change to this row in tQosPolicerArbiterTable." ::= { tQosPolicerArbiterEntry 4 } tQosPolicerArbiterDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerArbiterDescr specifies the description for the policer control policy arbiter for the given tier." DEFVAL { ''H } ::= { tQosPolicerArbiterEntry 5 } tQosPolicerArbiterRate OBJECT-TYPE SYNTAX THPolPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosPolicerArbiterRate specifies the maximum frame based bandwidth limit of this policer control policy arbiter for the given tier." DEFVAL { -1 } ::= { tQosPolicerArbiterEntry 6 } tQosPolicerArbiterParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tQosPolicerArbiterParent specifies the scheduler to which this queue would be feeding." DEFVAL { "root" } ::= { tQosPolicerArbiterEntry 7 } tQosPolicerArbiterLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tQosPolicerArbiterLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tQosPolicerArbiterEntry 8 } tQosPolicerArbiterWeight OBJECT-TYPE SYNTAX TPolicerWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tQosPolicerArbiterWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tQosPolicerArbiterEntry 9 } -- ------------------------- -- QOS Ingress Policer table -- ------------------------- tQosIngPolicerTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosIngPolicerTableLastChanged indicates the timestamp of last change to the tQosIngPolicerTable." ::= { tQosTimeStampObjects 97 } tQosIngPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosIngPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngPolicerTable defines QOS Ingress Policer Table for providing, via SNMP, the capability of defining the policers in the ingress queue groups. tQosIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the Qos policies." ::= { tQosPolicerObjects 4 } tQosIngPolicerEntry OBJECT-TYPE SYNTAX TQosIngPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngPolicerEntry defines an entry in the tQosIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosIngPolicerRowStatus." INDEX { tQosIngQGroupName, tQosIngPolicerId } ::= { tQosIngPolicerTable 1 } TQosIngPolicerEntry ::= SEQUENCE { tQosIngPolicerId TIngPolicerId, tQosIngPolicerRowStatus RowStatus, tQosIngPolicerLastChanged TimeStamp, tQosIngPolicerDescr TItemDescription, tQosIngPolicerPIRAdaptation TAdaptationRule, tQosIngPolicerCIRAdaptation TAdaptationRule, tQosIngPolicerParent TNamedItemOrEmpty, tQosIngPolicerLevel TLevel, tQosIngPolicerWeight TPolicerWeight, tQosIngPolicerAdminPIR THPolPIRRate, tQosIngPolicerAdminCIR THPolCIRRate, tQosIngPolicerCBS TPlcrBurstSizeBytes, tQosIngPolicerMBS TPlcrBurstSizeBytes, tQosIngPolicerHiPrioOnly TBurstPercentOrDefault, tQosIngPolicerPktOffset TPerPacketOffset, tQosIngPolicerProfileCapped TruthValue, tQosIngPolicerStatMode TmnxIngPolicerStatMode, tQosIngPolicerSlopeStartDepth Unsigned32, tQosIngPolicerSlopeMaxDepth Unsigned32, tQosIngPolicerSlopeMaxProb Unsigned32, tQosIngPolicerSlopeMap TmnxSlopeMap, tQosIngPolicerAdvCfgPolicy TNamedItemOrEmpty } tQosIngPolicerId OBJECT-TYPE SYNTAX TIngPolicerId MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosIngPolicerId defines the Ingress Queue Group Policer identifier. It identifies an ingress queue group policer in the managed system." ::= { tQosIngPolicerEntry 1 } tQosIngPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerRowStatus allows entries to be created and deleted in the tQosIngPolicerTable." ::= { tQosIngPolicerEntry 2 } tQosIngPolicerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified." ::= { tQosIngPolicerEntry 3 } tQosIngPolicerDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerDescr specifies the description of the policer." DEFVAL { ''H } ::= { tQosIngPolicerEntry 4 } tQosIngPolicerPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosIngPolicerEntry 5 } tQosIngPolicerCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosIngPolicerEntry 6 } tQosIngPolicerParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerParent specifies the arbiter to which this policer would be feeding." DEFVAL { ''H } ::= { tQosIngPolicerEntry 7 } tQosIngPolicerLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tQosIngPolicerEntry 8 } tQosIngPolicerWeight OBJECT-TYPE SYNTAX TPolicerWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding" DEFVAL { 1 } ::= { tQosIngPolicerEntry 9 } tQosIngPolicerAdminPIR OBJECT-TYPE SYNTAX THPolPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tQosIngPolicerEntry 10 } tQosIngPolicerAdminCIR OBJECT-TYPE SYNTAX THPolCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerAdminCIR specifies the administrative CIR specified by the user." DEFVAL { 0 } ::= { tQosIngPolicerEntry 11 } tQosIngPolicerCBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold." DEFVAL { -1 } ::= { tQosIngPolicerEntry 12 } tQosIngPolicerMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold." DEFVAL { -1 } ::= { tQosIngPolicerEntry 13 } tQosIngPolicerHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic." DEFVAL { -1 } ::= { tQosIngPolicerEntry 14 } tQosIngPolicerPktOffset OBJECT-TYPE SYNTAX TPerPacketOffset MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer." DEFVAL { 0 } ::= { tQosIngPolicerEntry 15 } tQosIngPolicerProfileCapped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tQosIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer." DEFVAL { false } ::= { tQosIngPolicerEntry 16 } tQosIngPolicerStatMode OBJECT-TYPE SYNTAX TmnxIngPolicerStatMode MAX-ACCESS read-create STATUS current DESCRIPTION "tQosIngPolicerStatMode specifies the mode of statistics collected by this policer." DEFVAL { minimal } ::= { tQosIngPolicerEntry 17 } tQosIngPolicerSlopeStartDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 10000 } ::= { tQosIngPolicerEntry 18 } tQosIngPolicerSlopeMaxDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 10000 } ::= { tQosIngPolicerEntry 19 } tQosIngPolicerSlopeMaxProb OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosIngPolicerSlopeStartDepth up to the tQosIngPolicerSlopeMaxProb at the tQosIngPolicerSlopeMaxDepth." DEFVAL { 10000 } ::= { tQosIngPolicerEntry 20 } tQosIngPolicerSlopeMap OBJECT-TYPE SYNTAX TmnxSlopeMap MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngPolicerSlopeMap specifies the slope map to be used with this policer." DEFVAL { none } ::= { tQosIngPolicerEntry 21 } tQosIngPolicerAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer." DEFVAL { ''H } ::= { tQosIngPolicerEntry 22 } -- ------------------------- -- QOS Egress Policer table -- ------------------------- tQosEgrPolicerTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosEgrPolicerTableLastChanged indicates the timestamp of last change to the tQosEgrPolicerTable." ::= { tQosTimeStampObjects 98 } tQosEgrPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF TQosEgrPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrPolicerTable defines QOS egress Policer Table for providing, via SNMP, the capability of defining the policers in the egress queue groups. tQosEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within Qos policies." ::= { tQosPolicerObjects 5 } tQosEgrPolicerEntry OBJECT-TYPE SYNTAX TQosEgrPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrPolicerEntry defines an entry in the tQosEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosEgrPolicerRowStatus." INDEX { tQosEgrQGroupName, tQosEgrPolicerId } ::= { tQosEgrPolicerTable 1 } TQosEgrPolicerEntry ::= SEQUENCE { tQosEgrPolicerId TEgrPolicerId, tQosEgrPolicerRowStatus RowStatus, tQosEgrPolicerLastChanged TimeStamp, tQosEgrPolicerDescr TItemDescription, tQosEgrPolicerPIRAdaptation TAdaptationRule, tQosEgrPolicerCIRAdaptation TAdaptationRule, tQosEgrPolicerParent TNamedItemOrEmpty, tQosEgrPolicerLevel TLevel, tQosEgrPolicerWeight TPolicerWeight, tQosEgrPolicerAdminPIR THPolPIRRate, tQosEgrPolicerAdminCIR THPolCIRRate, tQosEgrPolicerCBS TPlcrBurstSizeBytes, tQosEgrPolicerMBS TPlcrBurstSizeBytes, tQosEgrPolicerHiPrioOnly TBurstPercentOrDefault, tQosEgrPolicerPktOffset TPerPacketOffset, tQosEgrPolicerProfileCapped TruthValue, tQosEgrPolicerStatMode TmnxEgrPolicerStatMode, tQosEgrPolicerSlopeStartDepth Unsigned32, tQosEgrPolicerSlopeMaxDepth Unsigned32, tQosEgrPolicerSlopeMaxProb Unsigned32, tQosEgrPolicerSlopeMap TmnxSlopeMap, tQosEgrPolicerAdvCfgPolicy TNamedItemOrEmpty } tQosEgrPolicerId OBJECT-TYPE SYNTAX TEgrPolicerId MAX-ACCESS not-accessible STATUS current DESCRIPTION "tQosEgrPolicerId defines the Egress Queue Group Policer identifier. It identifies an egress queue group policer in the managed system." ::= { tQosEgrPolicerEntry 1 } tQosEgrPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerRowStatus allows entries to be created and deleted in the tQosEgrPolicerTable." ::= { tQosEgrPolicerEntry 2 } tQosEgrPolicerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tQosEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified." ::= { tQosEgrPolicerEntry 3 } tQosEgrPolicerDescr OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerDescr specifies the description of the policer." DEFVAL { ''H } ::= { tQosEgrPolicerEntry 4 } tQosEgrPolicerPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosEgrPolicerEntry 5 } tQosEgrPolicerCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tQosEgrPolicerEntry 6 } tQosEgrPolicerParent OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerParent specifies the arbiter to which this policer would be feeding" DEFVAL { ''H } ::= { tQosEgrPolicerEntry 7 } tQosEgrPolicerLevel OBJECT-TYPE SYNTAX TLevel MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerLevel specifies the level of priority while feeding the parent." DEFVAL { 1 } ::= { tQosEgrPolicerEntry 8 } tQosEgrPolicerWeight OBJECT-TYPE SYNTAX TPolicerWeight MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { tQosEgrPolicerEntry 9 } tQosEgrPolicerAdminPIR OBJECT-TYPE SYNTAX THPolPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerAdminPIR specifies the administrative PIR specified by the user." DEFVAL { -1 } ::= { tQosEgrPolicerEntry 10 } tQosEgrPolicerAdminCIR OBJECT-TYPE SYNTAX THPolCIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerAdminCIR specifies the administrative CIR specified by the user." DEFVAL { 0 } ::= { tQosEgrPolicerEntry 11 } tQosEgrPolicerCBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold." DEFVAL { -1 } ::= { tQosEgrPolicerEntry 12 } tQosEgrPolicerMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold." DEFVAL { -1 } ::= { tQosEgrPolicerEntry 13 } tQosEgrPolicerHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic." DEFVAL { -1 } ::= { tQosEgrPolicerEntry 14 } tQosEgrPolicerPktOffset OBJECT-TYPE SYNTAX TPerPacketOffset MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer." DEFVAL { 0 } ::= { tQosEgrPolicerEntry 15 } tQosEgrPolicerProfileCapped OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tQosEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer." DEFVAL { false } ::= { tQosEgrPolicerEntry 16 } tQosEgrPolicerStatMode OBJECT-TYPE SYNTAX TmnxEgrPolicerStatMode MAX-ACCESS read-create STATUS current DESCRIPTION "tQosEgrPolicerStatMode specifies the mode of statistics collected by this policer." DEFVAL { minimal } ::= { tQosEgrPolicerEntry 17 } tQosEgrPolicerSlopeStartDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 10000 } ::= { tQosEgrPolicerEntry 18 } tQosEgrPolicerSlopeMaxDepth OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 10000 } ::= { tQosEgrPolicerEntry 20 } tQosEgrPolicerSlopeMaxProb OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosEgrPolicerSlopeStartDepth up to the tQosEgrPolicerSlopeMaxProb at the tQosEgrPolicerSlopeMaxDepth." DEFVAL { 10000 } ::= { tQosEgrPolicerEntry 21 } tQosEgrPolicerSlopeMap OBJECT-TYPE SYNTAX TmnxSlopeMap MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrPolicerSlopeMap specifies the slope map to be used with this policer." DEFVAL { none } ::= { tQosEgrPolicerEntry 22 } tQosEgrPolicerAdvCfgPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer." DEFVAL { ''H } ::= { tQosEgrPolicerEntry 23 } -- -- Advanced Configuration Policy Table -- tAdvCfgPolicyTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tAdvCfgPolicyTblLastChgd indicates the timestamp of last change to the tAdvCfgPolicyTable." ::= { tQosTimeStampObjects 100 } tAdvCfgPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TAdvCfgPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tAdvCfgPolicyTable has an entry for each configuration policy for queue and policer parameters configured on this system." ::= { tQosPolicerObjects 6 } tAdvCfgPolicyEntry OBJECT-TYPE SYNTAX TAdvCfgPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular configuration policy. Entries are created and deleted by the user." INDEX { tAdvCfgPolicyName } ::= { tAdvCfgPolicyTable 1} TAdvCfgPolicyEntry ::= SEQUENCE { tAdvCfgPolicyName TNamedItem, tAdvCfgPolicyRowStatus RowStatus, tAdvCfgLastChanged TimeStamp, tAdvCfgDescription TItemDescription, tAdvCfgChildAdmnPirPrcnt Unsigned32, tAdvCfgChildAdminRate TAdvCfgRate, tAdvCfgOMGranPirPrcnt Unsigned32, tAdvCfgOMGranRate TAdvCfgRate, tAdvCfgMaxDecPirPrcnt Unsigned32, tAdvCfgMaxDecRate TMaxDecRate, tAdvCfgHiRateHoldTime Unsigned32, tAdvCfgTimeAvgFactor Unsigned32, tAdvCfgSampleInterval Unsigned32, tAdvCfgFastStart TruthValue, tAdvCfgFastStop TruthValue, tAdvCfgAbvOffCapPirPrcnt Unsigned32, tAdvCfgAbvOffCapRate Integer32, tAdvCfgBWDGranPirPrcnt Unsigned32, tAdvCfgBWDGranRate TAdvCfgRate, tAdvCfgMinOnly TruthValue, tAdvCfgDecOnly TruthValue } tAdvCfgPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tAdvCfgPolicyName specifies the name of the advanced configuration policy." ::= { tAdvCfgPolicyEntry 1 } tAdvCfgPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgPolicyRowStatus is used for the creation and deletion of advanced configuration policies." ::= { tAdvCfgPolicyEntry 2 } tAdvCfgLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tAdvCfgLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tAdvCfgPolicyEntry 3 } tAdvCfgDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgDescription specifies the description of this advanced configuration policy." DEFVAL { ''H } ::= { tAdvCfgPolicyEntry 4 } tAdvCfgChildAdmnPirPrcnt OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgChildAdmnPirPrcnt specifies the percentage of the child's administrative PIR that should be added to the child's offered rate, capped by the child's PIR. When the value of tAdvCfgChildAdmnPirPrcnt is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 5 } tAdvCfgChildAdminRate OBJECT-TYPE SYNTAX TAdvCfgRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgChildAdminRate specifies the explicit number of kilobits-per-second that should be added to the child's offered rate. When the value of tAdvCfgChildAdminRate is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 6 } tAdvCfgOMGranPirPrcnt OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgOMGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the threshold sensitivity to offered rate. When the value of tAdvCfgOMGranPirPrcnt is set to '0', it restores the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 7 } tAdvCfgOMGranRate OBJECT-TYPE SYNTAX TAdvCfgRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgOMGranRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate change sensitivity value. When the value of tAdvCfgOMGranRate is set to '0', the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName are restored." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 8 } tAdvCfgMaxDecPirPrcnt OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgMaxDecPirPrcnt specifies the percentage of the child's administrative PIR that should be used as the decrement limit to offered rate change. When the value of tAdvCfgMaxDecPirPrcnt is set to '10000', any currently configured maximum decrement limit for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed." DEFVAL { 10000 } ::= { tAdvCfgPolicyEntry 9 } tAdvCfgMaxDecRate OBJECT-TYPE SYNTAX TMaxDecRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgMaxDecRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate decrement limit value." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 10 } tAdvCfgHiRateHoldTime OBJECT-TYPE SYNTAX Unsigned32 (0..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgHiRateHoldTime specifies the time period that the current offered rate should be maintained for a child policer or queue. When tAdvCfgHiRateHoldTime is set to '0', any currently configured hold time for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 11 } tAdvCfgTimeAvgFactor OBJECT-TYPE SYNTAX Unsigned32 (0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgTimeAvgFactor is used the weight the new offered rate with a portion of the pervious offered rate. When tAdvCfgTimeAvgFactor is set to '0', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 12 } tAdvCfgSampleInterval OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgSampleInterval specifies the interval for sampling the child's offered rate. A value of '1' of tAdvCfgSampleInterval represents fastest sampling rate available while a value of '8' represents slowest sampling period available. When tAdvCfgSampleInterval is set to '4', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed." DEFVAL { 1 } ::= { tAdvCfgPolicyEntry 13 } tAdvCfgFastStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgFastStart specifies the whether fast detection of initial bandwidth on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStart is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children." DEFVAL { false } ::= { tAdvCfgPolicyEntry 14 } tAdvCfgFastStop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgFastStop specifies the whether fast detection of lack of offered rate on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStop is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children." DEFVAL { false } ::= { tAdvCfgPolicyEntry 15 } tAdvCfgAbvOffCapPirPrcnt OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgAbvOffCapPirPrcnt specifies the percentage of the child's administrative PIR that should be fair share increase limit, capped by the child's PIR. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '10000', the fair share operational PIR rate increase limit from all child policers and queues associated with tAdvCfgPolicyName policy are removed." DEFVAL { 10000 } ::= { tAdvCfgPolicyEntry 16 } tAdvCfgAbvOffCapRate OBJECT-TYPE SYNTAX Integer32 (-1 | 0..100000000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgAbvOffCapRate specifies the explicit number of kilobits-per-second that should be used as the limit to the child's fair share increase to the operational PIR. When the value of tAdvCfgAbvOffCapRate is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapRate is set to '-1', it means maximum rate." DEFVAL { -1 } ::= { tAdvCfgPolicyEntry 17 } tAdvCfgBWDGranPirPrcnt OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgBWDGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the rounding step value. When the value of tAdvCfgBWDGranPirPrcnt is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 18 } tAdvCfgBWDGranRate OBJECT-TYPE SYNTAX TAdvCfgRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgBWDGranRate specifies the explicit number of kilobits-per-second that should be used as the child's rounding step value. When the value of tAdvCfgBWDGranRate is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName." DEFVAL { 0 } ::= { tAdvCfgPolicyEntry 19 } tAdvCfgMinOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgMinOnly specifies the system to interpret the increase in tAdvCfgChildAdminRate as a minimum offered rate. When the tAdvCfgFastStop is set to 'false', the system uses the specified increase in tAdvCfgChildAdmnPirPrcnt or tAdvCfgChildAdminRate as a minimum offered rate even for inactive queues or policers associated with tAdvCfgPolicyName." DEFVAL { false } ::= { tAdvCfgPolicyEntry 20 } tAdvCfgDecOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tAdvCfgDecOnly specifies the tAdvCfgTimeAvgFactor adjustment to be applied if the new offered rate is decreasing compared to the previous offered rate. If the new offered rate is greater than the previous offered rate, the adjustment is not applied. When the tAdvCfgDecOnly is set to 'false', it has no impact on tAdvCfgTimeAvgFactor adjustment." DEFVAL { false } ::= { tAdvCfgPolicyEntry 21 } -- -- Port Scheduler Policy Group table -- tPortSchPlcyGrpTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tPortSchPlcyGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyGrpTable." ::= { tQosTimeStampObjects 91 } tPortSchPlcyGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF TPortSchPlcyGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tPortSchPlcyGrpTable has an entry for each port scheduler group configured on this system." ::= { tSchedulerObjects 5 } tPortSchPlcyGrpEntry OBJECT-TYPE SYNTAX TPortSchPlcyGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular port scheduler group. Entries are created and deleted by the user." INDEX { tPortSchedulerPlcyName, tPortSchPlcyGrpName } ::= { tPortSchPlcyGrpTable 1 } TPortSchPlcyGrpEntry ::= SEQUENCE { tPortSchPlcyGrpName TNamedItem, tPortSchPlcyGrpRowStatus RowStatus, tPortSchPlcyGrpLastChanged TimeStamp, tPortSchPlcyGrpAdminPIR TPortSchedulerPIRRate, tPortSchPlcyGrpAdminCIR TPortSchedulerCIR } tPortSchPlcyGrpName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tPortSchPlcyGrpName specifies the name of the port scheduler group." ::= { tPortSchPlcyGrpEntry 1 } tPortSchPlcyGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyGrpRowStatus is used for the creation and deletion of port scheduler policies." ::= { tPortSchPlcyGrpEntry 2 } tPortSchPlcyGrpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tPortSchPlcyGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row." ::= { tPortSchPlcyGrpEntry 3 } tPortSchPlcyGrpAdminPIR OBJECT-TYPE SYNTAX TPortSchedulerPIRRate UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyGrpAdminPIR specifies the total bandwidth limit, Admin PIR of this port scheduler group." DEFVAL { -1 } ::= { tPortSchPlcyGrpEntry 4 } tPortSchPlcyGrpAdminCIR OBJECT-TYPE SYNTAX TPortSchedulerCIR UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyGrpAdminCIR specifies the within-cir bandwidth limit of this port scheduler group." DEFVAL { -1 } ::= { tPortSchPlcyGrpEntry 5 } -- -- Port Scheduler Policy level group table -- tPortSchPlcyLvlGrpTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tPortSchPlcyLvlGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyLvlGrpTable." ::= { tQosTimeStampObjects 92 } tPortSchPlcyLvlGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF TPortSchPlcyLvlGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tPortSchPlcyLvlGrpTable has an entry for each port scheduler configured on this system for priority level group objects." ::= { tSchedulerObjects 6 } tPortSchPlcyLvlGrpEntry OBJECT-TYPE SYNTAX TPortSchPlcyLvlGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular port scheduler specific priority level group information." AUGMENTS { tPortSchedulerPlcyEntry } ::= { tPortSchPlcyLvlGrpTable 1 } TPortSchPlcyLvlGrpEntry ::= SEQUENCE { tPortSchPlcyLvlGrpLastChanged TimeStamp, tPortSchPlcyLvl1GrpName TNamedItemOrEmpty, tPortSchPlcyLvl2GrpName TNamedItemOrEmpty, tPortSchPlcyLvl3GrpName TNamedItemOrEmpty, tPortSchPlcyLvl4GrpName TNamedItemOrEmpty, tPortSchPlcyLvl5GrpName TNamedItemOrEmpty, tPortSchPlcyLvl6GrpName TNamedItemOrEmpty, tPortSchPlcyLvl7GrpName TNamedItemOrEmpty, tPortSchPlcyLvl8GrpName TNamedItemOrEmpty, tPortSchPlcyLvl1GrpWeight TNonZeroWeight, tPortSchPlcyLvl2GrpWeight TNonZeroWeight, tPortSchPlcyLvl3GrpWeight TNonZeroWeight, tPortSchPlcyLvl4GrpWeight TNonZeroWeight, tPortSchPlcyLvl5GrpWeight TNonZeroWeight, tPortSchPlcyLvl6GrpWeight TNonZeroWeight, tPortSchPlcyLvl7GrpWeight TNonZeroWeight, tPortSchPlcyLvl8GrpWeight TNonZeroWeight } tPortSchPlcyLvlGrpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tPortSchPlcyLvlGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row." ::= { tPortSchPlcyLvlGrpEntry 1 } tPortSchPlcyLvl1GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl1GrpName specifies the group associated with this scheduler policy for priority level set to '1'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 2 } tPortSchPlcyLvl2GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl2GrpName specifies the group associated with this scheduler policy for priority level set to '2'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 3 } tPortSchPlcyLvl3GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl3GrpName specifies the group associated with this scheduler policy for priority level set to '3'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 4 } tPortSchPlcyLvl4GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl4GrpName specifies the group associated with this scheduler policy for priority level set to '4'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 5 } tPortSchPlcyLvl5GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl5GrpName specifies the group associated with this scheduler policy for priority level set to '5'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 6 } tPortSchPlcyLvl6GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl6GrpName specifies the group associated with this scheduler policy for priority level set to '6'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 7 } tPortSchPlcyLvl7GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl7GrpName specifies the group associated with this scheduler policy for priority level set to '7'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 8 } tPortSchPlcyLvl8GrpName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl8GrpName specifies the group associated with this scheduler policy for priority level set to '8'." DEFVAL { ''H } ::= { tPortSchPlcyLvlGrpEntry 9 } tPortSchPlcyLvl1GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl1GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl1GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 10 } tPortSchPlcyLvl2GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl2GrpWeight specifies the weight associated with the group tPortSchPlcyLvl2GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl2GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 11 } tPortSchPlcyLvl3GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl3GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl3GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 12 } tPortSchPlcyLvl4GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl4GrpWeight specifies the weight associated with the group tPortSchPlcyLvl4GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl4GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 13 } tPortSchPlcyLvl5GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl5GrpWeight specifies the weight associated with the group tPortSchPlcyLvl5GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl5GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 14 } tPortSchPlcyLvl6GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl6GrpWeight specifies the weight associated with the group tPortSchPlcyLvl6GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl6GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 15 } tPortSchPlcyLvl7GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl7GrpWeight specifies the weight associated with the group tPortSchPlcyLvl7GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl7GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 16 } tPortSchPlcyLvl8GrpWeight OBJECT-TYPE SYNTAX TNonZeroWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tPortSchPlcyLvl8GrpWeight specifies the weight associated with the group tPortSchPlcyLvl8GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl8GrpName is set to a default value." DEFVAL { 1 } ::= { tPortSchPlcyLvlGrpEntry 17 } -- -- HSMDA WRR Policy table -- tHsmdaWrrPolicyTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyTblLastChgd indicates the timestamp of last change to the tHsmdaWrrPolicyTable." ::= { tQosTimeStampObjects 93 } tHsmdaWrrPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF THsmdaWrrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tHsmdaWrrPolicyTable contains the information of the Weighted Round Robin (WRR) policies configured on HSDMA queues." ::= { tWrrObjects 1 } tHsmdaWrrPolicyEntry OBJECT-TYPE SYNTAX THsmdaWrrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row in tHsmdaWrrPolicyEntry represents a HSMDA Weighted Round Robin (WRR) policy specified by tHsmdaWrrPolicyName." INDEX { tHsmdaWrrPolicyName } ::= { tHsmdaWrrPolicyTable 1 } THsmdaWrrPolicyEntry ::= SEQUENCE { tHsmdaWrrPolicyName TNamedItem, tHsmdaWrrPolicyRowStatus RowStatus, tHsmdaWrrPolicyLastChanged TimeStamp, tHsmdaWrrPolicyDescription TItemDescription, tHsmdaWrrPolicyIncludeQueues THsmdaPolicyIncludeQueues, tHsmdaWrrPolicySchedUsingClass THsmdaPolicyScheduleClass, tHsmdaWrrPolicyAggWeightAtClass THsmdaWeightClass } tHsmdaWrrPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyName specifies the name of the Weighted Round Robin (WRR) policy associated with this HSDMA queue." ::= { tHsmdaWrrPolicyEntry 1 } tHsmdaWrrPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyRowStatus is used for the creation and deletion of entries in the tHsmdaWrrPolicyTable." ::= { tHsmdaWrrPolicyEntry 2 } tHsmdaWrrPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyLastChanged indicates the sysUpTime for the last change to this row." ::= { tHsmdaWrrPolicyEntry 3 } tHsmdaWrrPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyDescription specifies the description of the Weighted Round Robin (WRR) policy on this HSMDA queue." ::= { tHsmdaWrrPolicyEntry 4 } tHsmdaWrrPolicyIncludeQueues OBJECT-TYPE SYNTAX THsmdaPolicyIncludeQueues MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyIncludeQueues specifies the queues that can be scheduled in the same class in a Weighted Round Robin (WRR) fashion within the HSMDA scheduler." DEFVAL { q1to2 } ::= { tHsmdaWrrPolicyEntry 5 } tHsmdaWrrPolicySchedUsingClass OBJECT-TYPE SYNTAX THsmdaPolicyScheduleClass MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaWrrPolicySchedUsingClass specifies which class to schedule the queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler." DEFVAL { 1 } ::= { tHsmdaWrrPolicyEntry 6 } tHsmdaWrrPolicyAggWeightAtClass OBJECT-TYPE SYNTAX THsmdaWeightClass MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tHsmdaWrrPolicyAggWeightAtClass specifies the weight assigned to the group of queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler." DEFVAL { class1 } ::= { tHsmdaWrrPolicyEntry 7 } -- -- network ingress fc table -- tNetworkIngressFCTableLstChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkIngressFCTableLstChanged indicates the timestamp of last change to the tNetworkIngressFCTable." ::= { tQosTimeStampObjects 101 } tNetworkIngressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all network policies' ingress FC traffic disposition." ::= { tNetworkObjects 8 } tNetworkIngressFCEntry OBJECT-TYPE SYNTAX TNetworkIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular network policy's ingress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tNetworkPolicyIndex, tNetworkIngressFCName } ::= { tNetworkIngressFCTable 1 } TNetworkIngressFCEntry ::= SEQUENCE { tNetworkIngressFCName TFCName, tNetworkIngressFCLastChanged TimeStamp, tNetworkIngressFCMultiCastPlcr TIngPolicerIdOrNone, tNetworkIngressFCUniCastPlcr TIngPolicerIdOrNone } tNetworkIngressFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tNetworkIngressFCName specifies the name of the forwarding class (FC)." ::= { tNetworkIngressFCEntry 1 } tNetworkIngressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkIngressFCLastChanged indicates the sysUpTime for the last change to this entry." ::= { tNetworkIngressFCEntry 2 } tNetworkIngressFCMultiCastPlcr OBJECT-TYPE SYNTAX TIngPolicerIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkIngressFCMultiCastPlcr specifies the policer to be used for multicast traffic for this forwarding-class." DEFVAL { 0 } ::= { tNetworkIngressFCEntry 3 } tNetworkIngressFCUniCastPlcr OBJECT-TYPE SYNTAX TIngPolicerIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tNetworkIngressFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding-class." DEFVAL { 0 } ::= { tNetworkIngressFCEntry 4 } -- -- network-egress policy dscp table -- tNetworkEgrDSCPTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkEgrDSCPTableLastChanged indicates the timestamp of last change to the tNetworkEgressDSCPTable." ::= { tQosTimeStampObjects 102 } tNetworkEgressDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkEgressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tNetworkEgressDSCPTable lists all DSCP entries for all network egress policies." ::= { tNetworkObjects 9 } tNetworkEgressDSCPEntry OBJECT-TYPE SYNTAX TNetworkEgressDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tNetworkEgressDSCPEntry defines a particular DSCP entry for a network egress policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. In the event that one policy has multiple entries, and the tNetworkEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tNetworkEgressDSCP)." INDEX { tNetworkPolicyIndex, tNetworkEgressDSCP } ::= { tNetworkEgressDSCPTable 1 } TNetworkEgressDSCPEntry ::= SEQUENCE { tNetworkEgressDSCP TDSCPName, tNetworkEgressDSCPRowStatus RowStatus, tNetworkEgressDSCPLastChanged TimeStamp, tNetworkEgressDSCPFC TFCName, tNetworkEgressDSCPProfile TProfile } tNetworkEgressDSCP OBJECT-TYPE SYNTAX TDSCPName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tNetworkEgressDSCP indicates the DSCP value for which the mapping is done. It is used as a secondary index for tNetworkEgressDSCPTable." ::= { tNetworkEgressDSCPEntry 1 } tNetworkEgressDSCPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkEgressDSCPRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressDSCPProfile must be specified when row is created." ::= { tNetworkEgressDSCPEntry 2 } tNetworkEgressDSCPLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tNetworkEgressDSCPEntry 3 } tNetworkEgressDSCPFC OBJECT-TYPE SYNTAX TFCName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkEgressDSCPFC will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions." DEFVAL { ''H } ::= { tNetworkEgressDSCPEntry 4 } tNetworkEgressDSCPProfile OBJECT-TYPE SYNTAX TProfile MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkEgressDSCPProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressDSCPProfile. It must be set at the time of row creation." ::= { tNetworkEgressDSCPEntry 5 } -- -- network-egress policy precedence table -- tNetworkEgrPrecTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkEgrPrecTableLastChanged indicates the timestamp of last change to the tNetworkEgressPrecTable." ::= { tQosTimeStampObjects 103 } tNetworkEgressPrecTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkEgressPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tNetworkEgressPrecTable table maintains the mapping of a particular precedence value into a forwarding class" ::= { tNetworkObjects 10 } tNetworkEgressPrecEntry OBJECT-TYPE SYNTAX TNetworkEgressPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tNetworkEgressPrecEntry defines a particular network egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user." INDEX { tNetworkPolicyIndex, tNetworkEgressPrecValue } ::= { tNetworkEgressPrecTable 1 } TNetworkEgressPrecEntry ::= SEQUENCE { tNetworkEgressPrecValue TPrecValue, tNetworkEgressPrecRowStatus RowStatus, tNetworkEgressPrecLastChanged TimeStamp, tNetworkEgressPrecFC TFCName, tNetworkEgressPrecProfile TProfile } tNetworkEgressPrecValue OBJECT-TYPE SYNTAX TPrecValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tNetworkEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tNetworkEgressPrecTable." ::= { tNetworkEgressPrecEntry 1 } tNetworkEgressPrecRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkEgressPrecRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressPrecProfile must be specified when row is created." ::= { tNetworkEgressPrecEntry 2 } tNetworkEgressPrecLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tNetworkEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tNetworkEgressPrecEntry 3 } tNetworkEgressPrecFC OBJECT-TYPE SYNTAX TFCName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkEgressPrecFC will overwrite the forwarding class derived from egress. The new forwarding class is used for egress remarking and queue mapping decisions." DEFVAL { ''H } ::= { tNetworkEgressPrecEntry 4 } tNetworkEgressPrecProfile OBJECT-TYPE SYNTAX TProfile MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tNetworkEgressPrecProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the egress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressPrecProfile. It must be set at the time of row creation." ::= { tNetworkEgressPrecEntry 5 } -- -- Conformance Information -- tmnxQosCompliances OBJECT IDENTIFIER ::= { tmnxQosConformance 1 } tmnxQosGroups OBJECT IDENTIFIER ::= { tmnxQosConformance 2 } -- -- compliance statements -- -- tmnxQosCompliance MODULE-COMPLIANCE -- ::= { tmnxQosCompliances 1 } -- tmnxQosR2r1Compliance MODULE-COMPLIANCE -- ::= { tmnxQosCompliances 2 } -- tmnxQosV3v0Compliance MODULE-COMPLIANCE -- ::= { tmnxQosCompliances 3 } tmnxQos7450V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R4.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV4v0Group, tmnxQosSapEgressR2r1Group, tmnxQosNetworkR2r1Group, tmnxQosSlopeGroup, tmnxQosSchedulerGroup, -- tmnxQosAtmTdpV3v0Group, tmnxQosQueueV4v0Group -- tmnxQosSapIpv6FilterR4r0Group } ::= { tmnxQosCompliances 4 } tmnxQos7750V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R4.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV4v0Group, tmnxQosSapEgressR2r1Group, tmnxQosNetworkR2r1Group, tmnxQosSlopeGroup, tmnxQosSchedulerGroup, tmnxQosAtmTdpV3v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group } ::= { tmnxQosCompliances 5 } tmnxQos7450V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R5.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV4v0Group, tmnxQosSapEgressV5v0Group, tmnxQosNetworkV5v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, -- tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group -- tmnxQosSapIpv6FilterR4r0Group } ::= { tmnxQosCompliances 6 } tmnxQos7750V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R5.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV4v0Group, tmnxQosSapEgressV5v0Group, tmnxQosNetworkV5v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group } ::= { tmnxQosCompliances 7 } tmnxQos7450V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV6v0Group, tmnxQosSapEgressV6v0Group, tmnxQosNetworkV6v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, -- tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, -- tmnxQosSapIpv6FilterR4r0Group tmnxQosHsmdaV6v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group } ::= { tmnxQosCompliances 8 } tmnxQos7750V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV6v0Group, tmnxQosSapEgressV6v0Group, tmnxQosNetworkV6v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group, tmnxQosHsmdaV6v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group } ::= { tmnxQosCompliances 9 } tmnxQos7450V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV6v0Group, tmnxQosSapEgressV6v0Group, tmnxQosNetworkV6v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, -- tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, -- tmnxQosSapIpv6FilterR4r0Group tmnxQosHsmdaV6v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup } ::= { tmnxQosCompliances 10 } tmnxQos77x0V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.1." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV6v0Group, tmnxQosSapEgressV6v0Group, tmnxQosNetworkV6v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group, tmnxQosHsmdaV6v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup } ::= { tmnxQosCompliances 11 } tmnxQos7450V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV6v0Group, tmnxQosSapEgressV6v0Group, tmnxQosNetworkV7v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, -- tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, -- tmnxQosSapIpv6FilterR4r0Group tmnxQosHsmdaV7v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjGroup, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosSapEgrQWredGroup } ::= { tmnxQosCompliances 12 } tmnxQos77x0V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7750 SROS series systems release R6.1." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV6v0Group, tmnxQosSapEgressV6v0Group, tmnxQosNetworkV7v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group, tmnxQosHsmdaV7v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjGroup, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosMcFrIngrGroup, tmnxQosMcFrEgrGroup, tmnxQosSapEgrQWredGroup } ::= { tmnxQosCompliances 13 } tmnxQos7450V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R8.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV8v0Group, tmnxQosSapEgressV8v0Group, tmnxQosNetworkV7v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, -- tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, -- tmnxQosSapIpv6FilterR4r0Group tmnxQosHsmdaV7v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjV8v0Group, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosSapEgrQWredGroup, tmnxQosPolicerV8v0Group, tmnxQosPortSchPlcyGrpGroup, tmnxQosBurstLimitGroup, tQosFCQGrpFC8v0Group } ::= { tmnxQosCompliances 14 } tmnxQos77x0V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R8.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV8v0Group, tmnxQosSapEgressV8v0Group, tmnxQosNetworkV7v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group, tmnxQosHsmdaV7v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjV8v0Group, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosMcFrIngrGroup, tmnxQosMcFrEgrGroup, tmnxQosSapEgrQWredGroup, tmnxQosPolicerV8v0Group, tQosQGrpV8v0Group, tmnxQosPortSchPlcyGrpGroup, tmnxQosBurstLimitGroup, tQosFCQGrpFC8v0Group } ::= { tmnxQosCompliances 15 } tmnxQos77x0V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R9.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV8v0Group, tmnxQosSapEgressV8v0Group, tmnxQosNetworkV7v0Group, tmnxQosNetworkV9v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV8v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosAtmTdpV9v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group, tmnxQosHsmdaV7v0Group, tmnxQosHsmdaV9v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjV8v0Group, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosMcFrIngrGroup, tmnxQosMcFrEgrGroup, tmnxQosSapEgrQWredGroup, tmnxQosPolicerV8v0Group, tmnxQosPolicerV9v0Group, tQosQGrpV8v0Group, tmnxQosPortSchPlcyGrpGroup, tmnxQosBurstLimitGroup, tmnxQosMacCritVidFltrV9v0Group, tmnxQosSapEgressV9v0Group, tmnxQosSapIngressV9v0Group, tmnxQosNamedPoolV9v0Group } ::= { tmnxQosCompliances 16 } tmnxQos7450V10v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R10.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV10v0Group, tmnxQosSapEgressV8v0Group, tmnxQosNetworkV7v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV5v0Group, -- tmnxQosAtmTdpV5v0Group, tmnxQosQueueV4v0Group, -- tmnxQosSapIpv6FilterR4r0Group tmnxQosHsmdaV10v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjV8v0Group, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosSapEgrQWredGroup, tmnxQosPolicerV8v0Group, tmnxQosPortSchPlcyGrpGroup, tmnxQosBurstLimitGroup, tQosFCQGrpFC8v0Group, tmnxQosPolicyV10v0Group, tmnxQosPolicerSlopeGroup } ::= { tmnxQosCompliances 17 } tmnxQos77x0V10v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R10.0." MODULE -- this module MANDATORY-GROUPS { tmnxQosGlobalGroup, tmnxQosDSCPGroup, tmnxQosFCGroup, tmnxQosSapIngressV10v0Group, tmnxQosSapEgressV8v0Group, tmnxQosNetworkV7v0Group, tmnxQosNetworkV9v0Group, tmnxQosSlopeGroup, tmnxQosSchedulerV8v0Group, tmnxQosAtmTdpV5v0Group, tmnxQosAtmTdpV9v0Group, tmnxQosQueueV4v0Group, tmnxQosSapIpv6FilterR4r0Group, tmnxQosHsmdaV10v0Group, tmnxQosHsmdaV9v0Group, tmnxQosFrameBasedV6v0Group, tmnxQosNamedPoolPolicyV6v0Group, tmnxQosMcMlpppIngrGroup, tmnxQosMcMlpppEgrGroup, tmnxQosQueueObjV8v0Group, tQosQGrpFCGroup, tmnxQosSapAtmV7v0Group, tmnxQosMcFrIngrGroup, tmnxQosMcFrEgrGroup, tmnxQosSapEgrQWredGroup, tmnxQosPolicerV8v0Group, tmnxQosPolicerV9v0Group, tQosQGrpV8v0Group, tmnxQosPortSchPlcyGrpGroup, tmnxQosBurstLimitGroup, tmnxQosMacCritVidFltrV9v0Group, tmnxQosSapEgressV9v0Group, tmnxQosSapIngressV9v0Group, tmnxQosNamedPoolV9v0Group, tmnxQosPolicyV10v0Group, tmnxQosQueueGrpPolcrV10v0Group, tmnxQosEgrReClassifyV10v0Group, tmnxQosPolicerSlopeGroup, tmnxQosAdvConfigV10v0Group, tmnxQosHsmdaV10v0Group, tmnxQosNetworkV10v0Group } ::= { tmnxQosCompliances 18 } -- -- units of conformance -- tmnxQosGlobalGroup OBJECT-GROUP OBJECTS { tQosDomainLastChanged } STATUS current DESCRIPTION "The group of objects supporting general management of QOS features on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 1 } tmnxQosDSCPGroup OBJECT-GROUP OBJECTS { tDSCPNameRowStatus, tDSCPNameStorageType, tDSCPNameDscpValue, tDSCPNameLastChanged, tDSCPNameTableLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of Differential Services Code Points on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 2 } tmnxQosFCGroup OBJECT-GROUP OBJECTS { tFCRowStatus, tFCStorageType, tFCValue, tFCNameLastChanged, tFCNameTableLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of Forwarding Classes on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 3 } -- tmnxQosSapIngressGroup OBJECT-GROUP -- ::= { tmnxQosGroups 4 } -- tmnxQosSapEgressGroup OBJECT-GROUP -- ::= { tmnxQosGroups 5 } -- tmnxQosNetworkGroup OBJECT-GROUP -- ::= { tmnxQosGroups 6 } tmnxQosSlopeGroup OBJECT-GROUP OBJECTS { tSlopeRowStatus, tSlopeDescription, tSlopeHiAdminStatus, tSlopeHiStartAverage, tSlopeHiMaxAverage, tSlopeHiMaxProbability, tSlopeLoAdminStatus, tSlopeLoStartAverage, tSlopeLoMaxAverage, tSlopeLoMaxProbability, tSlopeTimeAvgFactor, tSlopeLastChanged, tSlopePolicyTableLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of Slope policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 7 } tmnxQosSchedulerGroup OBJECT-GROUP OBJECTS { tSchedulerPolicyRowStatus, tSchedulerPolicyDescription, tSchedulerPolicyLastChanged, tSchedulerPolicyTableLastChanged, tVirtualSchedulerRowStatus, tVirtualSchedulerDescription, tVirtualSchedulerParent, tVirtualSchedulerLevel, tVirtualSchedulerWeight, tVirtualSchedulerCIRLevel, tVirtualSchedulerCIRWeight, tVirtualSchedulerPIR, tVirtualSchedulerCIR, tVirtualSchedulerSummedCIR, tVirtualSchedulerLastChanged, tVirtualSchedulerTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 8 } -- tmnxQosAtmTdpR2r1Group OBJECT-GROUP -- ::= { tmnxQosGroups 9 } tQosObsoleteObjectsGroup OBJECT-GROUP OBJECTS { tSapIngressQueueOperPIR, tSapIngressQueueOperCIR, tSapEgressQueueOperPIR, tSapEgressQueueOperCIR } STATUS current DESCRIPTION "The group of obsolete objects in the TIMETRA-QOS-MIB." ::= { tmnxQosGroups 10 } -- tmnxQosSapIngressR2r1Group OBJECT-GROUP -- ::= { tmnxQosGroups 11 } tmnxQosSapEgressR2r1Group OBJECT-GROUP OBJECTS { tSapEgressRowStatus, tSapEgressScope, tSapEgressDescription, tSapEgressLastChanged, tSapEgressTableLastChanged, tSapEgressQueueRowStatus, tSapEgressQueueParent, tSapEgressQueueLevel, tSapEgressQueueWeight, tSapEgressQueueCIRLevel, tSapEgressQueueCIRWeight, tSapEgressQueueExpedite, tSapEgressQueueCBS, tSapEgressQueueMBS, tSapEgressQueueHiPrioOnly, tSapEgressQueueCIRAdaptation, tSapEgressQueuePIRAdaptation, tSapEgressQueueAdminPIR, tSapEgressQueueAdminCIR, tSapEgressQueueLastChanged, tSapEgressQueueTableLastChanged, tSapEgressFCRowStatus, tSapEgressFCQueue, tSapEgressFCDot1PValue, tSapEgressFCLastChanged, tSapEgressFCTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 12 } tmnxQosNetworkR2r1Group OBJECT-GROUP OBJECTS { tNetworkPolicyRowStatus, tNetworkPolicyScope, tNetworkPolicyDescription, tNetworkPolicyIngressDefaultActionFC, tNetworkPolicyIngressDefaultActionProfile, tNetworkPolicyEgressRemark, tNetworkPolicyLastChanged, tNetworkPolicyIngressLerUseDscp, tNetworkPolicyTableLastChanged, tNetworkIngressDSCPRowStatus, tNetworkIngressDSCPFC, tNetworkIngressDSCPProfile, tNetworkIngressDSCPLastChanged, tNetworkIngressDSCPTableLastChanged, tNetworkIngressDot1pRowStatus, tNetworkIngressDot1pFC, tNetworkIngressDot1pProfile, tNetworkIngressDot1pLastChanged, tNetworkIngressDot1pTableLastChanged, tNetworkIngressLSPEXPRowStatus, tNetworkIngressLSPEXPFC, tNetworkIngressLSPEXPProfile, tNetworkIngressLSPEXPLastChanged, tNetworkIngressLSPEXPTableLastChanged, tNetworkEgressFCDSCPInProfile, tNetworkEgressFCDSCPOutProfile, tNetworkEgressFCLspExpInProfile, tNetworkEgressFCLspExpOutProfile, tNetworkEgressFCDot1pInProfile, tNetworkEgressFCDot1pOutProfile, tNetworkEgressFCLastChanged, tNetworkEgressFCTableLastChanged, tNetworkQueuePolicyRowStatus, tNetworkQueuePolicyDescription, tNetworkQueuePolicyLastChanged, tNetworkQueuePolicyTableLastChanged, tNetworkQueueRowStatus, tNetworkQueuePoolName, tNetworkQueueParent, tNetworkQueueLevel, tNetworkQueueWeight, tNetworkQueueCIRLevel, tNetworkQueueCIRWeight, tNetworkQueueMCast, tNetworkQueueExpedite, tNetworkQueueCIR, tNetworkQueuePIR, tNetworkQueueCBS, tNetworkQueueMBS, tNetworkQueueHiPrioOnly, tNetworkQueueLastChanged , tNetworkQueueTableLastChanged, tNetworkQueueFCRowStatus, tNetworkQueueFC, tNetworkQueueFCMCast, tNetworkQueueFCLastChanged, tNetworkQueueFCTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 13 } -- tmnxQosQueueR2r1Group OBJECT-GROUP -- ::= { tmnxQosGroups 14 } tmnxQosAtmTdpV3v0Group OBJECT-GROUP OBJECTS { tAtmTdpSir, tAtmTdpPir, tAtmTdpMbs, tAtmTdpMir, tAtmTdpShaping, tAtmTdpServCat, tAtmTdpLastChanged, tAtmTdpDescription, tAtmTdpRowStatus, tAtmTdpDescrType, tAtmTdpCdvt, tAtmTdpPolicing, tAtmTdpIndexNext, tAtmTdpsMaxSupported, tAtmTdpsCurrentlyConfigured, tAtmTdpTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 3.0." ::= { tmnxQosGroups 15 } tmnxQosSapIpv6FilterR4r0Group OBJECT-GROUP OBJECTS { tSapIngressIPv6CriteriaRowStatus, tSapIngressIPv6CriteriaDescription, tSapIngressIPv6CriteriaActionFC, tSapIngressIPv6CriteriaActionPriority, tSapIngressIPv6CriteriaSourceIpAddr, tSapIngressIPv6CriteriaSourceIpMask, tSapIngressIPv6CriteriaDestIpAddr, tSapIngressIPv6CriteriaDestIpMask, tSapIngressIPv6CriteriaNextHeader, tSapIngressIPv6CriteriaSourcePortValue1, tSapIngressIPv6CriteriaSourcePortValue2, tSapIngressIPv6CriteriaSourcePortOperator, tSapIngressIPv6CriteriaDestPortValue1, tSapIngressIPv6CriteriaDestPortValue2, tSapIngressIPv6CriteriaDestPortOperator, tSapIngressIPv6CriteriaDSCP, tSapIngressIPv6CriteriaLastChanged, tSapIngressIPv6CriteriaTableLastChanged } STATUS current DESCRIPTION "The group of objects for Qos Policies related to IPv6 on Alcatel-Lucent SROS series systems release 4.0." ::= { tmnxQosGroups 16 } tmnxQosQueueV4v0Group OBJECT-GROUP OBJECTS { tSharedQueuePolicyRowStatus, tSharedQueuePolicyDescription, tSharedQueuePolicyLastChanged, tSharedQueuePolicyTableLastChanged, tSharedQueueRowStatus, tSharedQueuePoolName, tSharedQueueParent, tSharedQueueLevel, tSharedQueueWeight, tSharedQueueCIRLevel, tSharedQueueCIRWeight, tSharedQueueExpedite, tSharedQueueCIR, tSharedQueuePIR, tSharedQueueCBS, tSharedQueueMBS, tSharedQueueHiPrioOnly, tSharedQueueLastChanged, tSharedQueueIsMultipoint, tSharedQueueTableLastChanged, tSharedQueueFCRowStatus, tSharedQueueFCQueue, tSharedQueueFCLastChanged, tSharedQueueFCTableLastChanged, tSharedQueueFCMCastQueue, tSharedQueueFCBCastQueue, tSharedQueueFCUnknownQueue } STATUS current DESCRIPTION "The group of objects supporting management of QoS queue policies on Alcatel-Lucent SROS series systems release 4.0." ::= { tmnxQosGroups 18 } tmnxQosSapIngressV4v0Group OBJECT-GROUP OBJECTS { tSapIngressRowStatus, tSapIngressScope, tSapIngressDescription, tSapIngressDefaultFC, tSapIngressDefaultFCPriority, tSapIngressMatchCriteria, tSapIngressLastChanged, tSapIngressTableLastChanged, tSapIngressQueueRowStatus, tSapIngressQueueParent, tSapIngressQueueLevel, tSapIngressQueueWeight, tSapIngressQueueCIRLevel, tSapIngressQueueCIRWeight, tSapIngressQueueMCast, tSapIngressQueueExpedite, tSapIngressQueueCBS, tSapIngressQueueMBS, tSapIngressQueueHiPrioOnly, tSapIngressQueueCIRAdaptation, tSapIngressQueuePIRAdaptation, tSapIngressQueueAdminPIR, tSapIngressQueueAdminCIR, tSapIngressQueueLastChanged, tSapIngressQueueMode, tSapIngressQueueTableLastChanged, tSapIngressQueuePoliced, tSapIngressDSCPRowStatus, tSapIngressDSCPFC, tSapIngressDSCPPriority, tSapIngressDSCPLastChanged, tSapIngressDSCPTableLastChanged, tSapIngressDot1pRowStatus, tSapIngressDot1pFC, tSapIngressDot1pPriority, tSapIngressDot1pLastChanged, tSapIngressDot1pTableLastChanged, tSapIngressIPCriteriaRowStatus, tSapIngressIPCriteriaDescription, tSapIngressIPCriteriaActionFC, tSapIngressIPCriteriaActionPriority, tSapIngressIPCriteriaSourceIpAddr, tSapIngressIPCriteriaSourceIpMask, tSapIngressIPCriteriaDestIpAddr, tSapIngressIPCriteriaDestIpMask, tSapIngressIPCriteriaProtocol, tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2, tSapIngressIPCriteriaSourcePortOperator, tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2, tSapIngressIPCriteriaDestPortOperator, tSapIngressIPCriteriaDSCP, tSapIngressIPCriteriaFragment, tSapIngressIPCriteriaLastChanged, tSapIngressIPCriteriaTableLastChanged, tSapIngressMacCriteriaRowStatus, tSapIngressMacCriteriaDescription, tSapIngressMacCriteriaActionFC, tSapIngressMacCriteriaActionPriority, tSapIngressMacCriteriaFrameType, tSapIngressMacCriteriaSrcMacAddr, tSapIngressMacCriteriaSrcMacMask, tSapIngressMacCriteriaDstMacAddr, tSapIngressMacCriteriaDstMacMask, tSapIngressMacCriteriaDot1PValue, tSapIngressMacCriteriaDot1PMask, tSapIngressMacCriteriaEthernetType, tSapIngressMacCriteriaDSAP, tSapIngressMacCriteriaDSAPMask, tSapIngressMacCriteriaSSAP, tSapIngressMacCriteriaSSAPMask, tSapIngressMacCriteriaSnapPid, tSapIngressMacCriteriaSnapOui, tSapIngressMacCriteriaLastChanged, tSapIngressMacCriteriaTableLastChanged, tSapIngressFCRowStatus, tSapIngressFCQueue, tSapIngressFCMCastQueue, tSapIngressFCBCastQueue, tSapIngressFCUnknownQueue, tSapIngressFCLastChanged, tSapIngressFCInProfRemark, tSapIngressFCInProfDscp, tSapIngressFCInProfPrec, tSapIngressFCOutProfRemark, tSapIngressFCOutProfDscp, tSapIngressFCOutProfPrec, tSapIngressFCProfile, tSapIngressFCTableLastChanged, tSapIngressPrecRowStatus, tSapIngressPrecFC, tSapIngressPrecFCPriority, tSapIngressPrecLastChanged, tSapIngressPrecTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 4.0." ::= { tmnxQosGroups 19 } tmnxQosSchedulerV5v0Group OBJECT-GROUP OBJECTS { tSchedulerPolicyRowStatus, tSchedulerPolicyDescription, tSchedulerPolicyLastChanged, tSchedulerPolicyTableLastChanged, tVirtualSchedulerRowStatus, tVirtualSchedulerDescription, tVirtualSchedulerParent, tVirtualSchedulerLevel, tVirtualSchedulerWeight, tVirtualSchedulerCIRLevel, tVirtualSchedulerCIRWeight, tVirtualSchedulerPIR, tVirtualSchedulerCIR, tVirtualSchedulerSummedCIR, tVirtualSchedulerLastChanged, tVirtualSchedulerUsePortParent, tVirtualSchedulerPortLvl, tVirtualSchedulerPortWght, tVirtualSchedulerPortCIRLvl, tVirtualSchedulerPortCIRWght, tVirtualSchedulerTableLastChanged, tPortSchedulerPlcyRowStatus, tPortSchedulerPlcyDescription, tPortSchedulerPlcyLastChanged, tPortSchedulerPlcyMaxRate, tPortSchedulerPlcyLvl1PIR, tPortSchedulerPlcyLvl1CIR, tPortSchedulerPlcyLvl2PIR, tPortSchedulerPlcyLvl2CIR, tPortSchedulerPlcyLvl3PIR, tPortSchedulerPlcyLvl3CIR, tPortSchedulerPlcyLvl4PIR, tPortSchedulerPlcyLvl4CIR, tPortSchedulerPlcyLvl5PIR, tPortSchedulerPlcyLvl5CIR, tPortSchedulerPlcyLvl6PIR, tPortSchedulerPlcyLvl6CIR, tPortSchedulerPlcyLvl7PIR, tPortSchedulerPlcyLvl7CIR, tPortSchedulerPlcyLvl8PIR, tPortSchedulerPlcyLvl8CIR, tPortSchedulerPlcyOrphanLvl, tPortSchedulerPlcyOrphanWeight, tPortSchedulerPlcyOrphanCIRLvl, tPortSchedulerPlcyOrphanCIRWght } STATUS current DESCRIPTION "The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 20 } tmnxQosSapEgressV5v0Group OBJECT-GROUP OBJECTS { tSapEgressRowStatus, tSapEgressScope, tSapEgressDescription, tSapEgressLastChanged, tSapEgressTableLastChanged, tSapEgressQueueRowStatus, tSapEgressQueueParent, tSapEgressQueueLevel, tSapEgressQueueWeight, tSapEgressQueueCIRLevel, tSapEgressQueueCIRWeight, tSapEgressQueueExpedite, tSapEgressQueueCBS, tSapEgressQueueMBS, tSapEgressQueueHiPrioOnly, tSapEgressQueueCIRAdaptation, tSapEgressQueuePIRAdaptation, tSapEgressQueueAdminPIR, tSapEgressQueueAdminCIR, tSapEgressQueueLastChanged, tSapEgressQueueTableLastChanged, tSapEgressFCRowStatus, tSapEgressFCQueue, tSapEgressFCDot1PValue, tSapEgressFCLastChanged, tSapEgressFCTableLastChanged, tSapEgressQueueUsePortParent, tSapEgressQueuePortLvl, tSapEgressQueuePortWght, tSapEgressQueuePortCIRLvl, tSapEgressQueuePortCIRWght, tSapEgressQueuePortAvgOverhead } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 21 } tmnxQosNetworkV5v0Group OBJECT-GROUP OBJECTS { tNetworkPolicyRowStatus, tNetworkPolicyScope, tNetworkPolicyDescription, tNetworkPolicyIngressDefaultActionFC, tNetworkPolicyIngressDefaultActionProfile, tNetworkPolicyEgressRemark, tNetworkPolicyLastChanged, tNetworkPolicyIngressLerUseDscp, tNetworkPolicyTableLastChanged, tNetworkIngressDSCPRowStatus, tNetworkIngressDSCPFC, tNetworkIngressDSCPProfile, tNetworkIngressDSCPLastChanged, tNetworkIngressDSCPTableLastChanged, tNetworkIngressDot1pRowStatus, tNetworkIngressDot1pFC, tNetworkIngressDot1pProfile, tNetworkIngressDot1pLastChanged, tNetworkIngressDot1pTableLastChanged, tNetworkIngressLSPEXPRowStatus, tNetworkIngressLSPEXPFC, tNetworkIngressLSPEXPProfile, tNetworkIngressLSPEXPLastChanged, tNetworkIngressLSPEXPTableLastChanged, tNetworkEgressFCDSCPInProfile, tNetworkEgressFCDSCPOutProfile, tNetworkEgressFCLspExpInProfile, tNetworkEgressFCLspExpOutProfile, tNetworkEgressFCDot1pInProfile, tNetworkEgressFCDot1pOutProfile, tNetworkEgressFCLastChanged, tNetworkEgressFCTableLastChanged, tNetworkQueuePolicyRowStatus, tNetworkQueuePolicyDescription, tNetworkQueuePolicyLastChanged, tNetworkQueuePolicyTableLastChanged, tNetworkQueueRowStatus, tNetworkQueuePoolName, tNetworkQueueParent, tNetworkQueueLevel, tNetworkQueueWeight, tNetworkQueueCIRLevel, tNetworkQueueCIRWeight, tNetworkQueueMCast, tNetworkQueueExpedite, tNetworkQueueCIR, tNetworkQueuePIR, tNetworkQueueCBS, tNetworkQueueMBS, tNetworkQueueHiPrioOnly, tNetworkQueueLastChanged, tNetworkQueueUsePortParent, tNetworkQueuePortLvl, tNetworkQueuePortWght, tNetworkQueuePortCIRLvl, tNetworkQueuePortCIRWght, tNetworkQueuePortAvgOverhead, tNetworkQueuePIRAdaptation, tNetworkQueueCIRAdaptation, tNetworkQueueTableLastChanged, tNetworkQueueFCRowStatus, tNetworkQueueFC, tNetworkQueueFCMCast, tNetworkQueueFCLastChanged, tNetworkQueueFCTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 22 } tmnxQosHsmdaV6v0Group OBJECT-GROUP OBJECTS { tHsmdaSchedulerPlcyRowStatus, tHsmdaSchedulerPlcyDescription, tHsmdaSchedulerPlcyMaxRate, tHsmdaSchedulerPlcyLvl1Rate, tHsmdaSchedulerPlcyLvl1GrpId, tHsmdaSchedulerPlcyLvl1WgtInGrp, tHsmdaSchedulerPlcyLvl2Rate, tHsmdaSchedulerPlcyLvl2GrpId, tHsmdaSchedulerPlcyLvl2WgtInGrp, tHsmdaSchedulerPlcyLvl3Rate, tHsmdaSchedulerPlcyLvl3GrpId, tHsmdaSchedulerPlcyLvl3WgtInGrp, tHsmdaSchedulerPlcyLvl4Rate, tHsmdaSchedulerPlcyLvl4GrpId, tHsmdaSchedulerPlcyLvl4WgtInGrp, tHsmdaSchedulerPlcyLvl5Rate, tHsmdaSchedulerPlcyLvl5GrpId, tHsmdaSchedulerPlcyLvl5WgtInGrp, tHsmdaSchedulerPlcyLvl6Rate, tHsmdaSchedulerPlcyLvl6GrpId, tHsmdaSchedulerPlcyLvl6WgtInGrp, tHsmdaSchedulerPlcyLvl7Rate, tHsmdaSchedulerPlcyLvl7GrpId, tHsmdaSchedulerPlcyLvl7WgtInGrp, tHsmdaSchedulerPlcyLvl8Rate, tHsmdaSchedulerPlcyLvl8GrpId, tHsmdaSchedulerPlcyLvl8WgtInGrp, tHsmdaSchedulerPlcyLastChanged, tHsmdaSchedulerPlcyGrp1Rate, tHsmdaSchedulerPlcyGrp2Rate, tSapEgressFCHsmdaQueue, tSapEgressFCDot1PHsmdaProfile, tSapEgressHsmdaQueueRowStatus, tSapEgressHsmdaQueueCIRAdaptn, tSapEgressHsmdaQueuePIRAdaptn, tSapEgressHsmdaQueueAdminPIR, tSapEgressHsmdaQueueAdminCIR, tSapEgressHsmdaQueueSlopePolicy, tSapEgressHsmdaQueueLastChanged, tSapIngressHsmdaPacketOffset, tSapIngressDefFCHsmdaCntrOvr, tSapIngressDot1pHsmdaCntrOvr, tSapIngressDSCPHsmdaCntrOvr, tSapIngressFCHsmdaQueue, tSapIngressFCHsmdaMCastQueue, tSapIngressFCHsmdaBCastQueue, tSapIngressPrecHsmdaCntrOvr, tSapIngressHsmdaQueueRowStatus, tSapIngressHsmdaQueueLastChanged, tSapIngressHsmdaQueueCIRAdaptn, tSapIngressHsmdaQueuePIRAdaptn, tSapIngressHsmdaQueueAdminPIR, tSapIngressHsmdaQueueAdminCIR, tSapIngressHsmdaQueueSlopePolicy, tSapIngressHsmdaQueuePoliced, tHsmdaPoolPolicyRowStatus, tHsmdaPoolLastChanged, tHsmdaPoolDescription, tHsmdaPoolSystemReserve, tHsmdaPoolRoot1AllocWeight, tHsmdaPoolRoot2AllocWeight, tHsmdaPoolRoot3AllocWeight, tHsmdaPoolRoot4AllocWeight, tHsmdaPoolRoot5AllocWeight, tHsmdaPoolRoot6AllocWeight, tHsmdaPoolRoot7AllocWeight, tHsmdaPoolRoot8AllocWeight, tHsmdaPoolClass1Parent, tHsmdaPoolClass1AllocPercent, tHsmdaPoolClass2Parent, tHsmdaPoolClass2AllocPercent, tHsmdaPoolClass3Parent, tHsmdaPoolClass3AllocPercent, tHsmdaPoolClass4Parent, tHsmdaPoolClass4AllocPercent, tHsmdaPoolClass5Parent, tHsmdaPoolClass5AllocPercent, tHsmdaPoolClass6Parent, tHsmdaPoolClass6AllocPercent, tHsmdaPoolClass7Parent, tHsmdaPoolClass7AllocPercent, tHsmdaPoolClass8Parent, tHsmdaPoolClass8AllocPercent, tHsmdaSlopePolicyRowStatus, tHsmdaSlopeLastChanged, tHsmdaSlopeDescription, tHsmdaSlopeQueueMbs, tHsmdaSlopeHiAdminStatus, tHsmdaSlopeHiStartDepth, tHsmdaSlopeHiMaxDepth, tHsmdaSlopeHiMaxProbability, tHsmdaSlopeLoAdminStatus, tHsmdaSlopeLoStartDepth, tHsmdaSlopeLoMaxDepth, tHsmdaSlopeLoMaxProbability, tSapIngrHsmdaQueueTblLastChngd, tSapEgrHsmdaQueueTblLastChngd, tHsmdaSchedPlcyTblLastChngd, tHsmdaSchedPlcyGrpTblLastChngd, tHsmdaPoolPlcyTblLastChngd, tHsmdaSlopePolicyTableLastChanged, tSapIngressIPCritHsmdaCntrOvr, tSapEgressDSCPRowStatus, tSapEgressDSCPLastChanged, tSapEgressDSCPHsmdaCntrOverride, tSapEgressPrecRowStatus, tSapEgressPrecLastChanged, tSapEgressPrecHsmdaCntrOverride, tSapEgrIPCritRowStatus, tSapEgrIPCritLastChanged, tSapEgrIPCritDescription, tSapEgrIPCritActionHsmdaCntrOvr, tSapEgrIPCritSourceIpAddrType, tSapEgrIPCritSourceIpAddr, tSapEgrIPCritSourceIpMask, tSapEgrIPCritDestIpAddrType, tSapEgrIPCritDestIpAddr, tSapEgrIPCritDestIpMask, tSapEgrIPCritProtocol, tSapEgrIPCritSourcePortValue1, tSapEgrIPCritSourcePortValue2, tSapEgrIPCritSourcePortOperator, tSapEgrIPCritDestPortValue1, tSapEgrIPCritDestPortValue2, tSapEgrIPCritDestPortOperator, tSapEgrIPCritDSCP, tSapEgrIPCritFragment, tSapEgressMatchCriteria, tSapEgressHsmdaPacketOffset } STATUS obsolete DESCRIPTION "The group of objects supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 6.0." ::= { tmnxQosGroups 23 } tmnxQosAtmTdpV5v0Group OBJECT-GROUP OBJECTS { tAtmTdpSir, tAtmTdpPir, tAtmTdpMbs, tAtmTdpMir, tAtmTdpShaping, tAtmTdpServCat, tAtmTdpLastChanged, tAtmTdpDescription, tAtmTdpRowStatus, tAtmTdpDescrType, tAtmTdpCdvt, tAtmTdpPolicing, tAtmTdpCLPTagging, tAtmTdpIndexNext, tAtmTdpsMaxSupported, tAtmTdpsCurrentlyConfigured, tAtmTdpTableLastChanged } STATUS current DESCRIPTION "The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 5.0." ::= { tmnxQosGroups 24 } tmnxQosSapIngressV6v0Group OBJECT-GROUP OBJECTS { tSapIngressRowStatus, tSapIngressScope, tSapIngressDescription, tSapIngressDefaultFC, tSapIngressDefaultFCPriority, tSapIngressMatchCriteria, tSapIngressLastChanged, tSapIngressTableLastChanged, tSapIngressQueueRowStatus, tSapIngressQueueParent, tSapIngressQueueLevel, tSapIngressQueueWeight, tSapIngressQueueCIRLevel, tSapIngressQueueCIRWeight, tSapIngressQueueMCast, tSapIngressQueueExpedite, tSapIngressQueueCBS, tSapIngressQueueMBS, tSapIngressQueueHiPrioOnly, tSapIngressQueueCIRAdaptation, tSapIngressQueuePIRAdaptation, tSapIngressQueueAdminPIR, tSapIngressQueueAdminCIR, tSapIngressQueueLastChanged, tSapIngressQueueMode, tSapIngressQueuePoolName, tSapIngressQueueTableLastChanged, tSapIngressQueuePoliced, tSapIngressDSCPRowStatus, tSapIngressDSCPFC, tSapIngressDSCPPriority, tSapIngressDSCPLastChanged, tSapIngressDSCPTableLastChanged, tSapIngressDot1pRowStatus, tSapIngressDot1pFC, tSapIngressDot1pPriority, tSapIngressDot1pLastChanged, tSapIngressDot1pTableLastChanged, tSapIngressIPCriteriaRowStatus, tSapIngressIPCriteriaDescription, tSapIngressIPCriteriaActionFC, tSapIngressIPCriteriaActionPriority, tSapIngressIPCriteriaSourceIpAddr, tSapIngressIPCriteriaSourceIpMask, tSapIngressIPCriteriaDestIpAddr, tSapIngressIPCriteriaDestIpMask, tSapIngressIPCriteriaProtocol, tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2, tSapIngressIPCriteriaSourcePortOperator, tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2, tSapIngressIPCriteriaDestPortOperator, tSapIngressIPCriteriaDSCP, tSapIngressIPCriteriaFragment, tSapIngressIPCriteriaLastChanged, tSapIngressIPCriteriaTableLastChanged, tSapIngressMacCriteriaRowStatus, tSapIngressMacCriteriaDescription, tSapIngressMacCriteriaActionFC, tSapIngressMacCriteriaActionPriority, tSapIngressMacCriteriaFrameType, tSapIngressMacCriteriaSrcMacAddr, tSapIngressMacCriteriaSrcMacMask, tSapIngressMacCriteriaDstMacAddr, tSapIngressMacCriteriaDstMacMask, tSapIngressMacCriteriaDot1PValue, tSapIngressMacCriteriaDot1PMask, tSapIngressMacCriteriaEthernetType, tSapIngressMacCriteriaDSAP, tSapIngressMacCriteriaDSAPMask, tSapIngressMacCriteriaSSAP, tSapIngressMacCriteriaSSAPMask, tSapIngressMacCriteriaSnapPid, tSapIngressMacCriteriaSnapOui, tSapIngressMacCriteriaLastChanged, tSapIngressMacCriteriaTableLastChanged, tSapIngressFCRowStatus, tSapIngressFCQueue, tSapIngressFCMCastQueue, tSapIngressFCBCastQueue, tSapIngressFCUnknownQueue, tSapIngressFCLastChanged, tSapIngressFCInProfRemark, tSapIngressFCInProfDscp, tSapIngressFCInProfPrec, tSapIngressFCDE1OutOfProfile, tSapIngressFCOutProfRemark, tSapIngressFCOutProfDscp, tSapIngressFCOutProfPrec, tSapIngressFCProfile, tSapIngressFCTableLastChanged, tSapIngressPrecRowStatus, tSapIngressPrecFC, tSapIngressPrecFCPriority, tSapIngressPrecLastChanged, tSapIngressPrecTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 6.0." ::= { tmnxQosGroups 25 } tmnxQosSapEgressV6v0Group OBJECT-GROUP OBJECTS { tSapEgressRowStatus, tSapEgressScope, tSapEgressDescription, tSapEgressLastChanged, tSapEgressTableLastChanged, tSapEgressQueueRowStatus, tSapEgressQueueParent, tSapEgressQueueLevel, tSapEgressQueueWeight, tSapEgressQueueCIRLevel, tSapEgressQueueCIRWeight, tSapEgressQueueExpedite, tSapEgressQueueCBS, tSapEgressQueueMBS, tSapEgressQueueHiPrioOnly, tSapEgressQueueCIRAdaptation, tSapEgressQueuePIRAdaptation, tSapEgressQueueAdminPIR, tSapEgressQueueAdminCIR, tSapEgressQueueLastChanged, tSapEgressQueueTableLastChanged, tSapEgressFCRowStatus, tSapEgressFCQueue, tSapEgressFCLastChanged, tSapEgressFCTableLastChanged, tSapEgressFCDot1PInProfile, tSapEgressFCDot1POutProfile, tSapEgressFCForceDEValue, tSapEgressFCDEMark, tSapEgressFCInProfDscp, tSapEgressFCOutProfDscp, tSapEgressFCInProfPrec, tSapEgressFCOutProfPrec, tSapEgressQueueUsePortParent, tSapEgressQueuePortLvl, tSapEgressQueuePortWght, tSapEgressQueuePortCIRLvl, tSapEgressQueuePortCIRWght, tSapEgressQueuePortAvgOverhead, tSapEgressQueuePoolName } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 26 } tmnxQosNetworkV6v0Group OBJECT-GROUP OBJECTS { tNetworkPolicyRowStatus, tNetworkPolicyScope, tNetworkPolicyDescription, tNetworkPolicyIngressDefaultActionFC, tNetworkPolicyIngressDefaultActionProfile, tNetworkPolicyEgressRemark, tNetworkPolicyLastChanged, tNetworkPolicyIngressLerUseDscp, tNetworkPolicyTableLastChanged, tNetworkIngressDSCPRowStatus, tNetworkIngressDSCPFC, tNetworkIngressDSCPProfile, tNetworkIngressDSCPLastChanged, tNetworkIngressDSCPTableLastChanged, tNetworkIngressDot1pRowStatus, tNetworkIngressDot1pFC, tNetworkIngressDot1pProfile, tNetworkIngressDot1pLastChanged, tNetworkIngressDot1pTableLastChanged, tNetworkIngressLSPEXPRowStatus, tNetworkIngressLSPEXPFC, tNetworkIngressLSPEXPProfile, tNetworkIngressLSPEXPLastChanged, tNetworkIngressLSPEXPTableLastChanged, tNetworkEgressFCDSCPInProfile, tNetworkEgressFCDSCPOutProfile, tNetworkEgressFCLspExpInProfile, tNetworkEgressFCLspExpOutProfile, tNetworkEgressFCDot1pInProfile, tNetworkEgressFCDot1pOutProfile, tNetworkEgressFCLastChanged, tNetworkEgressFCForceDEValue, tNetworkEgressFCDEMark, tNetworkEgressFCTableLastChanged, tNetworkQueuePolicyRowStatus, tNetworkQueuePolicyDescription, tNetworkQueuePolicyLastChanged, tNetworkQueuePolicyTableLastChanged, tNetworkQueueRowStatus, tNetworkQueuePoolName, tNetworkQueueParent, tNetworkQueueLevel, tNetworkQueueWeight, tNetworkQueueCIRLevel, tNetworkQueueCIRWeight, tNetworkQueueMCast, tNetworkQueueExpedite, tNetworkQueueCIR, tNetworkQueuePIR, tNetworkQueueCBS, tNetworkQueueMBS, tNetworkQueueHiPrioOnly, tNetworkQueueLastChanged, tNetworkQueueUsePortParent, tNetworkQueuePortLvl, tNetworkQueuePortWght, tNetworkQueuePortCIRLvl, tNetworkQueuePortCIRWght, tNetworkQueuePortAvgOverhead, tNetworkQueuePIRAdaptation, tNetworkQueueCIRAdaptation, tNetworkQueueTableLastChanged, tNetworkQueueFCRowStatus, tNetworkQueueFC, tNetworkQueueFCMCast, tNetworkQueueFCLastChanged, tNetworkQueueFCTableLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 27 } tmnxQosFrameBasedV6v0Group OBJECT-GROUP OBJECTS { tSchedulerPolicyFrameBasedAccnt } STATUS current DESCRIPTION "The group of objects supporting management of frame-based queue accounting on Alcatel-Lucent SROS series systems release 6.0." ::= { tmnxQosGroups 28 } tmnxQosObsoletedV6v0Group OBJECT-GROUP OBJECTS { tSapEgressFCDot1PValue } STATUS current DESCRIPTION "The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 29 } tmnxQosNamedPoolPolicyV6v0Group OBJECT-GROUP OBJECTS { tNamedPoolPolicyTableLastChanged, tNamedPoolPolicyRowStatus, tNamedPoolPolicyLastChanged, tNamedPoolPolicyDescription, tNamedPoolPolicyQ1DefaultWeight, tNamedPoolPolicyQ1MdaWeight, tNamedPoolPolicyQ1PortWeight, tQ1NamedPoolTableLastChanged, tQ1NamedPoolRowStatus, tQ1NamedPoolLastChanged, tQ1NamedPoolDescription, tQ1NamedPoolNetworkAllocWeight, tQ1NamedPoolAccessAllocWeight, tQ1NamedPoolSlopePolicy, tQ1NamedPoolReservedCbs } STATUS current DESCRIPTION "The group of objects for the named pool policy on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 30 } tmnxQosMcMlpppIngrGroup OBJECT-GROUP OBJECTS { tMcMlpppIngrProfDescription, tMcMlpppIngrProfLastChanged, tMcMlpppIngrProfRowStatus, tMcMlpppIngrProfTableLastChanged, tMcMlpppIngrClassReassemblyTmout, tMcMlpppIngrClassLastChanged, tMcMlpppIngrClassTableLastChanged } STATUS current DESCRIPTION "The group of objects for the multi-class mlppp ingress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 31 } tmnxQosMcMlpppEgrGroup OBJECT-GROUP OBJECTS { tMcMlpppEgrProfDescription, tMcMlpppEgrProfLastChanged, tMcMlpppEgrProfRowStatus, tMcMlpppEgrProfTableLastChanged, tMcMlpppEgrClassMir, tMcMlpppEgrClassWeight, tMcMlpppEgrClassMaxSize, tMcMlpppEgrClassLastChanged, tMcMlpppEgrClassTableLastChanged, tMcMlpppEgrFCClass, tMcMlpppEgrFCLastChanged, tMcMlpppEgrFCTableLastChanged } STATUS current DESCRIPTION "The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 32 } tmnxQosQueueObjGroup OBJECT-GROUP OBJECTS { tQosEgrQGroupDescr, tQosEgrQGroupLastChanged, tQosEgrQGroupRowStatus, tQosEgrQGroupTableLastChanged, tQosEgrQTableLastChanged, tQosEgrQueueAdminCIR, tQosEgrQueueAdminPIR, tQosEgrQueueCBS, tQosEgrQueueCIRAdaptation, tQosEgrQueueCIRLevel, tQosEgrQueueCIRWeight, tQosEgrQueueExpedite, tQosEgrQueueHiPrioOnly, tQosEgrQueueLastChanged, tQosEgrQueueLevel, tQosEgrQueueMBS, tQosEgrQueuePIRAdaptation, tQosEgrQueueParent, tQosEgrQueuePoolName, tQosEgrQueuePortCIRLvl, tQosEgrQueuePortCIRWght, tQosEgrQueuePortLvl, tQosEgrQueuePortWght, tQosEgrQueueRowStatus, tQosEgrQueueUsePortParent, tQosEgrQueueWeight, tQosIngQTableLastChanged, tQosIngQGroupDescr, tQosIngQGroupLastChanged, tQosIngQGroupRowStatus, tQosIngQGroupTableLastChanged, tQosIngQueueAdminCIR, tQosIngQueueAdminPIR, tQosIngQueueCBS, tQosIngQueueCIRAdaptation, tQosIngQueueCIRLevel, tQosIngQueueCIRWeight, tQosIngQueueExpedite, tQosIngQueueHiPrioOnly, tQosIngQueueLastChanged, tQosIngQueueLevel, tQosIngQueueMBS, tQosIngQueueMCast, tQosIngQueueMode, tQosIngQueuePIRAdaptation, tQosIngQueueParent, tQosIngQueuePoliced, tQosIngQueuePoolName, tQosIngQueueRowStatus, tQosIngQueueWeight } STATUS obsolete DESCRIPTION "The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 33 } tQosQGrpFCGroup OBJECT-GROUP OBJECTS { tSapIngressFCQGrp, tSapIngressFCQGrpMCast, tSapIngressFCQGrpBCast, tSapIngressFCQGrpUnknown, tSapEgressFCQGrp, tNetworkEgressFCQGrpQueue } STATUS current DESCRIPTION "The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 34 } tmnxQosNetworkV7v0Group OBJECT-GROUP OBJECTS { tNetworkPolicyRowStatus, tNetworkPolicyScope, tNetworkPolicyDescription, tNetworkPolicyIngressDefaultActionFC, tNetworkPolicyIngressDefaultActionProfile, tNetworkPolicyEgressRemark, tNetworkPolicyLastChanged, tNetworkPolicyIngressLerUseDscp, tNetworkPolicyEgressRemarkDscp, tNetworkPolicyTableLastChanged, tNetworkIngressDSCPRowStatus, tNetworkIngressDSCPFC, tNetworkIngressDSCPProfile, tNetworkIngressDSCPLastChanged, tNetworkIngressDSCPTableLastChanged, tNetworkIngressDot1pRowStatus, tNetworkIngressDot1pFC, tNetworkIngressDot1pProfile, tNetworkIngressDot1pLastChanged, tNetworkIngressDot1pTableLastChanged, tNetworkIngressLSPEXPRowStatus, tNetworkIngressLSPEXPFC, tNetworkIngressLSPEXPProfile, tNetworkIngressLSPEXPLastChanged, tNetworkIngressLSPEXPTableLastChanged, tNetworkEgressFCDSCPInProfile, tNetworkEgressFCDSCPOutProfile, tNetworkEgressFCLspExpInProfile, tNetworkEgressFCLspExpOutProfile, tNetworkEgressFCDot1pInProfile, tNetworkEgressFCDot1pOutProfile, tNetworkEgressFCLastChanged, tNetworkEgressFCForceDEValue, tNetworkEgressFCDEMark, tNetworkEgressFCTableLastChanged, tNetworkQueuePolicyRowStatus, tNetworkQueuePolicyDescription, tNetworkQueuePolicyLastChanged, tNetworkQueuePolicyTableLastChanged, tNetworkQueueRowStatus, tNetworkQueuePoolName, tNetworkQueueParent, tNetworkQueueLevel, tNetworkQueueWeight, tNetworkQueueCIRLevel, tNetworkQueueCIRWeight, tNetworkQueueMCast, tNetworkQueueExpedite, tNetworkQueueCIR, tNetworkQueuePIR, tNetworkQueueCBS, tNetworkQueueMBS, tNetworkQueueHiPrioOnly, tNetworkQueueLastChanged, tNetworkQueueUsePortParent, tNetworkQueuePortLvl, tNetworkQueuePortWght, tNetworkQueuePortCIRLvl, tNetworkQueuePortCIRWght, tNetworkQueuePortAvgOverhead, tNetworkQueuePIRAdaptation, tNetworkQueueCIRAdaptation, tNetworkQueueTableLastChanged, tNetworkQueueFCRowStatus, tNetworkQueueFC, tNetworkQueueFCMCast, tNetworkQueueFCLastChanged, tNetworkQueueFCTableLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 35 } tmnxQosHsmdaV7v0Group OBJECT-GROUP OBJECTS { tHsmdaSchedulerPlcyRowStatus, tHsmdaSchedulerPlcyDescription, tHsmdaSchedulerPlcyMaxRate, tHsmdaSchedulerPlcyLvl1Rate, tHsmdaSchedulerPlcyLvl1GrpId, tHsmdaSchedulerPlcyLvl1WgtInGrp, tHsmdaSchedulerPlcyLvl2Rate, tHsmdaSchedulerPlcyLvl2GrpId, tHsmdaSchedulerPlcyLvl2WgtInGrp, tHsmdaSchedulerPlcyLvl3Rate, tHsmdaSchedulerPlcyLvl3GrpId, tHsmdaSchedulerPlcyLvl3WgtInGrp, tHsmdaSchedulerPlcyLvl4Rate, tHsmdaSchedulerPlcyLvl4GrpId, tHsmdaSchedulerPlcyLvl4WgtInGrp, tHsmdaSchedulerPlcyLvl5Rate, tHsmdaSchedulerPlcyLvl5GrpId, tHsmdaSchedulerPlcyLvl5WgtInGrp, tHsmdaSchedulerPlcyLvl6Rate, tHsmdaSchedulerPlcyLvl6GrpId, tHsmdaSchedulerPlcyLvl6WgtInGrp, tHsmdaSchedulerPlcyLvl7Rate, tHsmdaSchedulerPlcyLvl7GrpId, tHsmdaSchedulerPlcyLvl7WgtInGrp, tHsmdaSchedulerPlcyLvl8Rate, tHsmdaSchedulerPlcyLvl8GrpId, tHsmdaSchedulerPlcyLvl8WgtInGrp, tHsmdaSchedulerPlcyLastChanged, tHsmdaSchedulerPlcyGrp1Rate, tHsmdaSchedulerPlcyGrp2Rate, tSapEgressFCHsmdaQueue, tSapEgressHsmdaQueueRowStatus, tSapEgressHsmdaQueueCIRAdaptn, tSapEgressHsmdaQueuePIRAdaptn, tSapEgressHsmdaQueueAdminPIR, tSapEgressHsmdaQueueAdminCIR, tSapEgressHsmdaQueueSlopePolicy, tSapEgressHsmdaQueueLastChanged, tSapIngressHsmdaPacketOffset, tSapIngressDefFCHsmdaCntrOvr, tSapIngressDot1pHsmdaCntrOvr, tSapIngressDSCPHsmdaCntrOvr, tSapIngressFCHsmdaQueue, tSapIngressFCHsmdaMCastQueue, tSapIngressFCHsmdaBCastQueue, tSapIngressPrecHsmdaCntrOvr, tSapIngressHsmdaQueueRowStatus, tSapIngressHsmdaQueueLastChanged, tSapIngressHsmdaQueueCIRAdaptn, tSapIngressHsmdaQueuePIRAdaptn, tSapIngressHsmdaQueueAdminPIR, tSapIngressHsmdaQueueAdminCIR, tSapIngressHsmdaQueueSlopePolicy, tSapIngressHsmdaQueuePoliced, tHsmdaPoolPolicyRowStatus, tHsmdaPoolLastChanged, tHsmdaPoolDescription, tHsmdaPoolSystemReserve, tHsmdaPoolRoot1AllocWeight, tHsmdaPoolRoot2AllocWeight, tHsmdaPoolRoot3AllocWeight, tHsmdaPoolRoot4AllocWeight, tHsmdaPoolRoot5AllocWeight, tHsmdaPoolRoot6AllocWeight, tHsmdaPoolRoot7AllocWeight, tHsmdaPoolRoot8AllocWeight, tHsmdaPoolClass1Parent, tHsmdaPoolClass1AllocPercent, tHsmdaPoolClass2Parent, tHsmdaPoolClass2AllocPercent, tHsmdaPoolClass3Parent, tHsmdaPoolClass3AllocPercent, tHsmdaPoolClass4Parent, tHsmdaPoolClass4AllocPercent, tHsmdaPoolClass5Parent, tHsmdaPoolClass5AllocPercent, tHsmdaPoolClass6Parent, tHsmdaPoolClass6AllocPercent, tHsmdaPoolClass7Parent, tHsmdaPoolClass7AllocPercent, tHsmdaPoolClass8Parent, tHsmdaPoolClass8AllocPercent, tHsmdaSlopePolicyRowStatus, tHsmdaSlopeLastChanged, tHsmdaSlopeDescription, tHsmdaSlopeQueueMbs, tHsmdaSlopeHiAdminStatus, tHsmdaSlopeHiStartDepth, tHsmdaSlopeHiMaxDepth, tHsmdaSlopeHiMaxProbability, tHsmdaSlopeLoAdminStatus, tHsmdaSlopeLoStartDepth, tHsmdaSlopeLoMaxDepth, tHsmdaSlopeLoMaxProbability, tSapIngrHsmdaQueueTblLastChngd, tSapEgrHsmdaQueueTblLastChngd, tHsmdaSchedPlcyTblLastChngd, tHsmdaSchedPlcyGrpTblLastChngd, tHsmdaPoolPlcyTblLastChngd, tHsmdaSlopePolicyTableLastChanged, tSapIngressIPCritHsmdaCntrOvr, tSapEgressDSCPRowStatus, tSapEgressDSCPLastChanged, tSapEgressDSCPHsmdaCntrOverride, tSapEgressPrecRowStatus, tSapEgressPrecLastChanged, tSapEgressPrecHsmdaCntrOverride, tSapEgrIPCritRowStatus, tSapEgrIPCritLastChanged, tSapEgrIPCritDescription, tSapEgrIPCritActionHsmdaCntrOvr, tSapEgrIPCritSourceIpAddrType, tSapEgrIPCritSourceIpAddr, tSapEgrIPCritSourceIpMask, tSapEgrIPCritDestIpAddrType, tSapEgrIPCritDestIpAddr, tSapEgrIPCritDestIpMask, tSapEgrIPCritProtocol, tSapEgrIPCritSourcePortValue1, tSapEgrIPCritSourcePortValue2, tSapEgrIPCritSourcePortOperator, tSapEgrIPCritDestPortValue1, tSapEgrIPCritDestPortValue2, tSapEgrIPCritDestPortOperator, tSapEgrIPCritDSCP, tSapEgrIPCritFragment, tSapEgressMatchCriteria, tSapEgressHsmdaPacketOffset, tSapEgrIPCritActionFC, tSapEgrIPCritActionProfile, tSapEgressDSCPfc, tSapEgressDSCPprofile, tSapEgressPrecFC, tSapEgressPrecProfile } STATUS obsolete DESCRIPTION "The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 7.0." ::= { tmnxQosGroups 36 } tmnxQosSapAtmV7v0Group OBJECT-GROUP OBJECTS { tSapIngressMacCriteriaAtmVci } STATUS current DESCRIPTION "The group of objects supporting management of SAP ATM related QoS policies for Alcatel-Lucent SROS series systems release 7.0." ::= { tmnxQosGroups 37 } tmnxQosMcFrIngrGroup OBJECT-GROUP OBJECTS { tMcFrIngrProfDescription, tMcFrIngrProfLastChanged, tMcFrIngrProfRowStatus, tMcFrIngrProfTableLastChanged, tMcFrIngrClassReassemblyTmout, tMcFrIngrClassLastChanged, tMcFrIngrClassTableLastChanged } STATUS current DESCRIPTION "The group of objects for the multi-class Fr ingress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 38 } tmnxQosMcFrEgrGroup OBJECT-GROUP OBJECTS { tMcFrEgrProfDescription, tMcFrEgrProfLastChanged, tMcFrEgrProfRowStatus, tMcFrEgrProfTableLastChanged, tMcFrEgrClassMir, tMcFrEgrClassWeight, tMcFrEgrClassMaxSize, tMcFrEgrClassLastChanged, tMcFrEgrClassTableLastChanged } STATUS current DESCRIPTION "The group of objects for the multi-class Fr egress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 39 } tmnxQosSapEgrQWredGroup OBJECT-GROUP OBJECTS { tSapEgressQueueXPWredQ, tSapEgressQueueXPWredQSlope, tQosEgrQueueXPWredQ, tQosEgrQueueXPWredQSlope } STATUS current DESCRIPTION "The group of objects for the WRED specific SAP egress queue information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 40 } tmnxQosSapIngressV8v0Group OBJECT-GROUP OBJECTS { tSapIngressRowStatus, tSapIngressScope, tSapIngressDescription, tSapIngressDefaultFC, tSapIngressDefaultFCPriority, tSapIngressMatchCriteria, tSapIngressLastChanged, tSapIngressTableLastChanged, tSapIngressQueueRowStatus, tSapIngressQueueParent, tSapIngressQueueLevel, tSapIngressQueueWeight, tSapIngressQueueCIRLevel, tSapIngressQueueCIRWeight, tSapIngressQueueMCast, tSapIngressQueueExpedite, tSapIngressQueueCBS, tSapIngressQueueHiPrioOnly, tSapIngressQueueCIRAdaptation, tSapIngressQueuePIRAdaptation, tSapIngressQueueAdminPIR, tSapIngressQueueAdminCIR, tSapIngressQueueLastChanged, tSapIngressQueueMode, tSapIngressQueuePoolName, tSapIngressQueueTableLastChanged, tSapIngressQueuePoliced, tSapIngressDSCPRowStatus, tSapIngressDSCPFC, tSapIngressDSCPPriority, tSapIngressDSCPLastChanged, tSapIngressDSCPTableLastChanged, tSapIngressDot1pRowStatus, tSapIngressDot1pFC, tSapIngressDot1pPriority, tSapIngressDot1pLastChanged, tSapIngressDot1pTableLastChanged, tSapIngressIPCriteriaRowStatus, tSapIngressIPCriteriaDescription, tSapIngressIPCriteriaActionFC, tSapIngressIPCriteriaActionPriority, tSapIngressIPCriteriaSourceIpAddr, tSapIngressIPCriteriaSourceIpMask, tSapIngressIPCriteriaDestIpAddr, tSapIngressIPCriteriaDestIpMask, tSapIngressIPCriteriaProtocol, tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2, tSapIngressIPCriteriaSourcePortOperator, tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2, tSapIngressIPCriteriaDestPortOperator, tSapIngressIPCriteriaDSCP, tSapIngressIPCriteriaFragment, tSapIngressIPCriteriaLastChanged, tSapIngressIPCriteriaTableLastChanged, tSapIngressMacCriteriaRowStatus, tSapIngressMacCriteriaDescription, tSapIngressMacCriteriaActionFC, tSapIngressMacCriteriaActionPriority, tSapIngressMacCriteriaFrameType, tSapIngressMacCriteriaSrcMacAddr, tSapIngressMacCriteriaSrcMacMask, tSapIngressMacCriteriaDstMacAddr, tSapIngressMacCriteriaDstMacMask, tSapIngressMacCriteriaDot1PValue, tSapIngressMacCriteriaDot1PMask, tSapIngressMacCriteriaEthernetType, tSapIngressMacCriteriaDSAP, tSapIngressMacCriteriaDSAPMask, tSapIngressMacCriteriaSSAP, tSapIngressMacCriteriaSSAPMask, tSapIngressMacCriteriaSnapPid, tSapIngressMacCriteriaSnapOui, tSapIngressMacCriteriaLastChanged, tSapIngressMacCriteriaTableLastChanged, tSapIngressFCRowStatus, tSapIngressFCQueue, tSapIngressFCMCastQueue, tSapIngressFCBCastQueue, tSapIngressFCUnknownQueue, tSapIngressFCLastChanged, tSapIngressFCInProfRemark, tSapIngressFCInProfDscp, tSapIngressFCInProfPrec, tSapIngressFCDE1OutOfProfile, tSapIngressFCOutProfRemark, tSapIngressFCOutProfDscp, tSapIngressFCOutProfPrec, tSapIngressFCProfile, tSapIngressFCTableLastChanged, tSapIngressPrecRowStatus, tSapIngressPrecFC, tSapIngressPrecFCPriority, tSapIngressPrecLastChanged, tSapIngressPrecTableLastChanged, tSapIngressLspExpRowStatus, tSapIngressLspExpLastChanged, tSapIngressLspExpFC, tSapIngressLspExpFCPriority, tSapIngressLspExpHsmdaCntrOvr, tSapIngressLspExpTableLastChange } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 8.0." ::= { tmnxQosGroups 41 } tmnxQosPolicerV8v0Group OBJECT-GROUP OBJECTS { tQosPolicerCtrlPolDescr, tQosPolicerCtrlPolLastChgd, tQosPolicerCtrlPolRowStatus, tQosPolicerCtrlPolTblLastChgd, tSapIngPolicerPktOffset, tSapIngPolicerAdminCIR, tSapIngPolicerAdminPIR, tSapIngPolicerCIRAdaptation, tSapIngPolicerDescr, tSapIngPolicerHiPrioOnly, tSapIngPolicerLastChanged, tSapIngPolicerLevel, tSapIngPolicerPIRAdaptation, tSapIngPolicerParent, tSapIngPolicerRowStatus, tSapIngPolicerStatMode, tSapIngPolicerTableLastChanged, tSapIngPolicerCBS, tSapIngPolicerMBS, tSapIngPolicerWeight, tSapEgrPolicerPktOffset, tSapEgrPolicerAdminCIR, tSapEgrPolicerAdminPIR, tSapEgrPolicerCIRAdaptation, tSapEgrPolicerDescr, tSapEgrPolicerHiPrioOnly, tSapEgrPolicerLastChanged, tSapEgrPolicerLevel, tSapEgrPolicerPIRAdaptation, tSapEgrPolicerParent, tSapEgrPolicerRowStatus, tSapEgrPolicerStatMode, tSapEgrPolicerTableLastChanged, tSapEgrPolicerCBS, tSapEgrPolicerMBS, tSapEgrPolicerWeight, tSapIngressFCBCastPolicer, tSapIngressFCMCastPolicer, tSapIngressFCPolicer, tSapIngressFCUnknownPolicer, tQosPolicerArbiterDescr, tQosPolicerArbiterLastChgd, tQosPolicerArbiterLevel, tQosPolicerArbiterParent, tQosPolicerArbiterRate, tQosPolicerArbiterRowStatus, tQosPolicerArbiterTblLastChgd, tQosPolicerArbiterWeight, tQosPolicerCtrlPolMinMBSSep, tQosPolicerCtrlPolRootMaxRate, tQosPolicerLevelCumMBS, tQosPolicerLevelLastChgd, tQosPolicerLevelTblLastChgd, tSapEgressFCPolicer, tQosPolicerLevelFixedMBS } STATUS current DESCRIPTION "The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 8.0." ::= { tmnxQosGroups 42 } tQosQGrpV8v0Group OBJECT-GROUP OBJECTS { tQosEgrQGroupFCRowStatus, tQosEgrQGroupFCLastChanged, tQosEgrQGroupFCQueue, tQosEgrQGroupFCTableLastChanged, tQosIngQueueMBSBytes, tQosEgrQueueMBSBytes, tSapEgressQueueMBSBytes, tSapIngressQueueMBSBytes, tQosEgrQueueAdminPIRPercent, tQosEgrQueueAdminCIRPercent, tQosEgrQueueRateType } STATUS current DESCRIPTION "The group of objects supporting the management of QOS Queue Groups on Alcatel-Lucent SROS series systems release 8.0." ::= { tmnxQosGroups 43 } tQosFCQGrpFC8v0Group OBJECT-GROUP OBJECTS { tSapEgressFCQGrpFC } STATUS current DESCRIPTION "The group of objects for the SAP egress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 44 } tmnxQosSapEgressV8v0Group OBJECT-GROUP OBJECTS { tSapEgressRowStatus, tSapEgressScope, tSapEgressDescription, tSapEgressLastChanged, tSapEgressTableLastChanged, tSapEgressQueueRowStatus, tSapEgressQueueParent, tSapEgressQueueLevel, tSapEgressQueueWeight, tSapEgressQueueCIRLevel, tSapEgressQueueCIRWeight, tSapEgressQueueExpedite, tSapEgressQueueCBS, tSapEgressQueueHiPrioOnly, tSapEgressQueueCIRAdaptation, tSapEgressQueuePIRAdaptation, tSapEgressQueueAdminPIR, tSapEgressQueueAdminCIR, tSapEgressQueueLastChanged, tSapEgressQueueTableLastChanged, tSapEgressFCRowStatus, tSapEgressFCQueue, tSapEgressFCLastChanged, tSapEgressFCTableLastChanged, tSapEgressFCDot1PInProfile, tSapEgressFCDot1POutProfile, tSapEgressFCForceDEValue, tSapEgressFCDEMark, tSapEgressFCInProfDscp, tSapEgressFCOutProfDscp, tSapEgressFCInProfPrec, tSapEgressFCOutProfPrec, tSapEgressQueueUsePortParent, tSapEgressQueuePortLvl, tSapEgressQueuePortWght, tSapEgressQueuePortCIRLvl, tSapEgressQueuePortCIRWght, tSapEgressQueuePortAvgOverhead, tSapEgressQueuePoolName } STATUS current DESCRIPTION "The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 45 } tmnxQosQueueObjV8v0Group OBJECT-GROUP OBJECTS { tQosEgrQGroupDescr, tQosEgrQGroupLastChanged, tQosEgrQGroupRowStatus, tQosEgrQGroupTableLastChanged, tQosEgrQTableLastChanged, tQosEgrQueueAdminCIR, tQosEgrQueueAdminPIR, tQosEgrQueueCBS, tQosEgrQueueCIRAdaptation, tQosEgrQueueCIRLevel, tQosEgrQueueCIRWeight, tQosEgrQueueExpedite, tQosEgrQueueHiPrioOnly, tQosEgrQueueLastChanged, tQosEgrQueueLevel, tQosEgrQueuePIRAdaptation, tQosEgrQueueParent, tQosEgrQueuePoolName, tQosEgrQueuePortCIRLvl, tQosEgrQueuePortCIRWght, tQosEgrQueuePortLvl, tQosEgrQueuePortWght, tQosEgrQueueRowStatus, tQosEgrQueueUsePortParent, tQosEgrQueueWeight, tQosIngQTableLastChanged, tQosIngQGroupDescr, tQosIngQGroupLastChanged, tQosIngQGroupRowStatus, tQosIngQGroupTableLastChanged, tQosIngQueueAdminCIR, tQosIngQueueAdminPIR, tQosIngQueueCBS, tQosIngQueueCIRAdaptation, tQosIngQueueCIRLevel, tQosIngQueueCIRWeight, tQosIngQueueExpedite, tQosIngQueueHiPrioOnly, tQosIngQueueLastChanged, tQosIngQueueLevel, tQosIngQueueMCast, tQosIngQueueMode, tQosIngQueuePIRAdaptation, tQosIngQueueParent, tQosIngQueuePoliced, tQosIngQueuePoolName, tQosIngQueueRowStatus, tQosIngQueueWeight } STATUS current DESCRIPTION "The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 46 } tmnxQosObsoletedV8v0Group OBJECT-GROUP OBJECTS { tSapIngressQueueMBS, tSapEgressQueueMBS, tQosIngQueueMBS, tQosEgrQueueMBS } STATUS current DESCRIPTION "The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 47 } tmnxQosPortSchPlcyGrpGroup OBJECT-GROUP OBJECTS { tPortSchPlcyLvl1GrpName, tPortSchPlcyLvl1GrpWeight, tPortSchPlcyLvl2GrpName, tPortSchPlcyLvl2GrpWeight, tPortSchPlcyLvl3GrpName, tPortSchPlcyLvl3GrpWeight, tPortSchPlcyLvl4GrpName, tPortSchPlcyLvl4GrpWeight, tPortSchPlcyLvl5GrpName, tPortSchPlcyLvl5GrpWeight, tPortSchPlcyLvl6GrpName, tPortSchPlcyLvl6GrpWeight, tPortSchPlcyLvl7GrpName, tPortSchPlcyLvl7GrpWeight, tPortSchPlcyLvl8GrpName, tPortSchPlcyLvl8GrpWeight, tPortSchPlcyLvlGrpLastChanged, tPortSchPlcyLvlGrpTblLastChgd, tPortSchPlcyGrpAdminCIR, tPortSchPlcyGrpAdminPIR, tPortSchPlcyGrpLastChanged, tPortSchPlcyGrpRowStatus, tPortSchPlcyGrpTblLastChgd } STATUS current DESCRIPTION "The group of objects supporting Port Scheduler Policy Group objects for the QoS on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 48 } tmnxQosSchedulerV8v0Group OBJECT-GROUP OBJECTS { tSchedulerPolicyRowStatus, tSchedulerPolicyDescription, tSchedulerPolicyLastChanged, tSchedulerPolicyTableLastChanged, tVirtualSchedulerRowStatus, tVirtualSchedulerDescription, tVirtualSchedulerParent, tVirtualSchedulerLevel, tVirtualSchedulerWeight, tVirtualSchedulerCIRLevel, tVirtualSchedulerCIRWeight, tVirtualSchedulerPIR, tVirtualSchedulerCIR, tVirtualSchedulerSummedCIR, tVirtualSchedulerLastChanged, tVirtualSchedulerUsePortParent, tVirtualSchedulerPortLvl, tVirtualSchedulerPortWght, tVirtualSchedulerPortCIRLvl, tVirtualSchedulerPortCIRWght, tVirtualSchedulerTableLastChanged, tPortSchedulerPlcyRowStatus, tPortSchedulerPlcyDescription, tPortSchedulerPlcyLastChanged, tPortSchedulerPlcyMaxRate, tPortSchedulerPlcyOrphanLvl, tPortSchedulerPlcyOrphanWeight, tPortSchedulerPlcyOrphanCIRLvl, tPortSchedulerPlcyOrphanCIRWght } STATUS current DESCRIPTION "The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 49 } tmnxQosBurstLimitGroup OBJECT-GROUP OBJECTS { tSapIngressQueueBurstLimit, tSapEgressQueueBurstLimit, tQosIngQueueBurstLimit, tQosEgrQueueBurstLimit } STATUS current DESCRIPTION "The group of objects supporting Burst-size management objects for the QoS on Alcatel-Lucent SROS series systems." ::= { tmnxQosGroups 50 } tmnxQosMacCritVidFltrV9v0Group OBJECT-GROUP OBJECTS { tSapIngressMacCritInnerTagValue, tSapIngressMacCritInnerTagMask, tSapIngressMacCritOuterTagValue, tSapIngressMacCritOuterTagMask, tSapIngressMacCritType } STATUS current DESCRIPTION "The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release." ::= { tmnxQosGroups 51 } tmnxQosSapEgressV9v0Group OBJECT-GROUP OBJECTS { tSapEgressQueuePktOffset, tSapEgressQueueAdminPIRPercent, tSapEgressQueueAdminCIRPercent, tSapEgressQueueRateType } STATUS current DESCRIPTION "The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems 9.0 release." ::= { tmnxQosGroups 52 } tmnxQosSapIngressV9v0Group OBJECT-GROUP OBJECTS { tSapIngressQueueAdminPIRPercent, tSapIngressQueueAdminCIRPercent, tSapIngressQueueRateType } STATUS current DESCRIPTION "The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems 9.0 release." ::= { tmnxQosGroups 53 } tmnxQosPolicerV9v0Group OBJECT-GROUP OBJECTS { tSapIngPolicerAdminCIRPercent, tSapIngPolicerAdminPIRPercent, tSapIngPolicerRateType, tSapEgrPolicerAdminCIRPercent, tSapEgrPolicerAdminPIRPercent, tSapEgrPolicerRateType } STATUS current DESCRIPTION "The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 9.0." ::= { tmnxQosGroups 54 } tmnxQosAtmTdpV9v0Group OBJECT-GROUP OBJECTS { tAtmTdpWeight } STATUS current DESCRIPTION "The group of objects for ATM Traffic Descriptor Profiles added in release 9.0 of SROS." ::= { tmnxQosGroups 55 } tmnxQosHsmdaV9v0Group OBJECT-GROUP OBJECTS { tHsmdaWrrPolicyTblLastChgd, tHsmdaWrrPolicyRowStatus, tHsmdaWrrPolicyLastChanged, tHsmdaWrrPolicyDescription, tHsmdaWrrPolicyIncludeQueues, tHsmdaWrrPolicySchedUsingClass, tHsmdaWrrPolicyAggWeightAtClass, tNetworkQueuePolicyEHWrrPlcy, tNetworkQueuePolicyEHPktBOffst, tNetworkEgrHsmdaQueueTblLastChgd, tNetworkEgrHsmdaQueuePIRPercent, tNetworkEgrHsmdaQueuePIRAdaptn, tNetworkEgrHsmdaQueueWrrWeight, tNetworkEgrHsmdaQueueMBS, tNetworkEgrHsmdaQueueSlopePolicy, tNetworkEgrHsmdaQueueLastChanged, tSapEgressHsmdaLowBrstMaxCls, tSapEgressHsmdaWrrPolicy, tSapEgressHsmdaQueueWrrWeight, tSapEgressHsmdaQueueMBS, tSapEgressHsmdaQueueBurstLimit, tNetworkEgrHsmdaQueueBurstLimit } STATUS current DESCRIPTION "The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 9.0." ::= { tmnxQosGroups 56 } tmnxQosNetworkV9v0Group OBJECT-GROUP OBJECTS { tNetworkQueueFCEgrHsmdaQueue } STATUS current DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 9.0." ::= { tmnxQosGroups 57 } tmnxQosNamedPoolV9v0Group OBJECT-GROUP OBJECTS { tQ1NamedPoolResvCbsAmbrAlrmStep, tQ1NamedPoolResvCbsAmbrAlrmMax, tQ1NamedPoolAmbrAlrmThresh, tQ1NamedPoolRedAlrmThresh } STATUS current DESCRIPTION "The group of objects supporting management of Network Named Pool policies on Alcatel-Lucent SROS series systems release 9.0." ::= { tmnxQosGroups 58 } tmnxQosHsmdaObsoletedV9v0Group OBJECT-GROUP OBJECTS { tSapEgressFCDot1PHsmdaProfile } STATUS current DESCRIPTION "The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 9.0." ::= { tmnxQosGroups 59 } tmnxQosPolicyV10v0Group OBJECT-GROUP OBJECTS { tSapEgrPolicyNameId, tSapEgrPolicyNameLastChanged, tSapEgrPolicyNameRowStatus, tSapEgrPolicyNameTableLastChgd, tSapEgressPolicyName, tSapIngPolicyNameId, tSapIngPolicyNameLastChanged, tSapIngPolicyNameRowStatus, tSapIngPolicyNameTableLastChgd, tSapIngressPolicyName } STATUS current DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 60 } tmnxQosQueueGrpPolcrV10v0Group OBJECT-GROUP OBJECTS { tQosIngPolicerTableLastChanged, tQosIngPolicerRowStatus, tQosIngPolicerLastChanged, tQosIngPolicerDescr, tQosIngPolicerPIRAdaptation, tQosIngPolicerCIRAdaptation, tQosIngPolicerParent, tQosIngPolicerLevel, tQosIngPolicerWeight, tQosIngPolicerAdminPIR, tQosIngPolicerAdminCIR, tQosIngPolicerCBS, tQosIngPolicerMBS, tQosIngPolicerHiPrioOnly, tQosIngPolicerPktOffset, tQosIngPolicerProfileCapped, tQosIngPolicerStatMode, tQosEgrPolicerTableLastChanged, tQosEgrPolicerRowStatus, tQosEgrPolicerLastChanged, tQosEgrPolicerDescr, tQosEgrPolicerPIRAdaptation, tQosEgrPolicerCIRAdaptation, tQosEgrPolicerParent, tQosEgrPolicerLevel, tQosEgrPolicerWeight, tQosEgrPolicerAdminPIR, tQosEgrPolicerAdminCIR, tQosEgrPolicerCBS, tQosEgrPolicerMBS, tQosEgrPolicerHiPrioOnly, tQosEgrPolicerPktOffset, tQosEgrPolicerProfileCapped, tQosEgrPolicerStatMode, tSapIngressFCPlcrFPQGrp, tSapIngressFCMCastPlcrFPQGrp, tSapIngressFCBCastPlcrFPQGrp, tSapIngressFCUnknownPlcrFPQGrp, tNetworkEgressFCQGrpPolicer, tNetworkIngressFCTableLstChanged, tNetworkIngressFCMultiCastPlcr, tNetworkIngressFCUniCastPlcr, tNetworkIngressFCLastChanged, tQosEgrQueuePktOffset, tQosPolicerCtrlPolProfPref, tSapEgrPolicerProfileCapped, tSapIngPolicerProfileCapped } STATUS current DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 61 } tmnxQosEgrReClassifyV10v0Group OBJECT-GROUP OBJECTS { tSapEgressEthernetCtag, tSapEgressDot1pRowStatus, tSapEgressDot1pLastChanged, tSapEgressDot1pTableLastChanged, tSapEgressDot1pFC, tSapEgressDot1pProfile } STATUS current DESCRIPTION "The group of objects supporting management of QoS Egress policies on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 62 } tmnxQosPolicerSlopeGroup OBJECT-GROUP OBJECTS { tQosEgrPolicerSlopeMap, tQosEgrPolicerSlopeMaxDepth, tQosEgrPolicerSlopeMaxProb, tQosEgrPolicerSlopeStartDepth, tQosIngPolicerSlopeMap, tQosIngPolicerSlopeMaxDepth, tQosIngPolicerSlopeMaxProb, tQosIngPolicerSlopeStartDepth, tSapEgrPolicerSlopeMap, tSapEgrPolicerSlopeMaxDepth, tSapEgrPolicerSlopeMaxProb, tSapEgrPolicerSlopeStartDepth, tSapIngPolicerSlopeMap, tSapIngPolicerSlopeMaxDepth, tSapIngPolicerSlopeMaxProb, tSapIngPolicerSlopeStartDepth } STATUS current DESCRIPTION "The group of objects supporting management of QoS policer slope on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 63 } tmnxQosAdvConfigV10v0Group OBJECT-GROUP OBJECTS { tAdvCfgPolicyTblLastChgd, tAdvCfgPolicyRowStatus, tAdvCfgLastChanged, tAdvCfgDescription, tAdvCfgChildAdmnPirPrcnt, tAdvCfgChildAdminRate, tAdvCfgOMGranPirPrcnt, tAdvCfgOMGranRate, tAdvCfgMaxDecPirPrcnt, tAdvCfgMaxDecRate, tAdvCfgHiRateHoldTime, tAdvCfgTimeAvgFactor, tAdvCfgSampleInterval, tAdvCfgFastStart, tAdvCfgFastStop, tAdvCfgAbvOffCapPirPrcnt, tAdvCfgAbvOffCapRate, tAdvCfgBWDGranPirPrcnt, tAdvCfgBWDGranRate, tQosEgrPolicerAdvCfgPolicy, tQosIngPolicerAdvCfgPolicy, tQosEgrQueueAdvCfgPolicy, tQosIngQueueAdvCfgPolicy, tSapEgrPolicerAdvCfgPolicy, tSapIngPolicerAdvCfgPolicy, tSapEgressQueueAdvCfgPolicy, tSapIngressQueueAdvCfgPolicy, tAdvCfgMinOnly, tAdvCfgDecOnly } STATUS current DESCRIPTION "The group of objects supporting management of QoS policer and queue advanced configuration parameters on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 64 } tmnxQosHsmdaV10v0Group OBJECT-GROUP OBJECTS { tHsmdaSchedulerPlcyRowStatus, tHsmdaSchedulerPlcyDescription, tHsmdaSchedulerPlcyMaxRate, tHsmdaSchedulerPlcyLvl1Rate, tHsmdaSchedulerPlcyLvl1GrpId, tHsmdaSchedulerPlcyLvl1WgtInGrp, tHsmdaSchedulerPlcyLvl2Rate, tHsmdaSchedulerPlcyLvl2GrpId, tHsmdaSchedulerPlcyLvl2WgtInGrp, tHsmdaSchedulerPlcyLvl3Rate, tHsmdaSchedulerPlcyLvl3GrpId, tHsmdaSchedulerPlcyLvl3WgtInGrp, tHsmdaSchedulerPlcyLvl4Rate, tHsmdaSchedulerPlcyLvl4GrpId, tHsmdaSchedulerPlcyLvl4WgtInGrp, tHsmdaSchedulerPlcyLvl5Rate, tHsmdaSchedulerPlcyLvl5GrpId, tHsmdaSchedulerPlcyLvl5WgtInGrp, tHsmdaSchedulerPlcyLvl6Rate, tHsmdaSchedulerPlcyLvl6GrpId, tHsmdaSchedulerPlcyLvl6WgtInGrp, tHsmdaSchedulerPlcyLvl7Rate, tHsmdaSchedulerPlcyLvl7GrpId, tHsmdaSchedulerPlcyLvl7WgtInGrp, tHsmdaSchedulerPlcyLvl8Rate, tHsmdaSchedulerPlcyLvl8GrpId, tHsmdaSchedulerPlcyLvl8WgtInGrp, tHsmdaSchedulerPlcyLastChanged, tHsmdaSchedulerPlcyGrp1Rate, tHsmdaSchedulerPlcyGrp2Rate, tSapEgressFCHsmdaQueue, tSapEgressHsmdaQueueRowStatus, tSapEgressHsmdaQueuePIRAdaptn, tSapEgressHsmdaQueueAdminPIR, tSapEgressHsmdaQueueSlopePolicy, tSapEgressHsmdaQueueLastChanged, tSapIngressHsmdaQueueRowStatus, tSapIngressHsmdaQueueLastChanged, tSapIngressHsmdaQueueCIRAdaptn, tSapIngressHsmdaQueuePIRAdaptn, tSapIngressHsmdaQueueAdminPIR, tSapIngressHsmdaQueueAdminCIR, tSapIngressHsmdaQueueSlopePolicy, tSapIngressHsmdaQueuePoliced, tHsmdaPoolPolicyRowStatus, tHsmdaPoolLastChanged, tHsmdaPoolDescription, tHsmdaPoolSystemReserve, tHsmdaPoolRoot1AllocWeight, tHsmdaPoolRoot2AllocWeight, tHsmdaPoolRoot3AllocWeight, tHsmdaPoolRoot4AllocWeight, tHsmdaPoolRoot5AllocWeight, tHsmdaPoolRoot6AllocWeight, tHsmdaPoolRoot7AllocWeight, tHsmdaPoolRoot8AllocWeight, tHsmdaPoolClass1Parent, tHsmdaPoolClass1AllocPercent, tHsmdaPoolClass2Parent, tHsmdaPoolClass2AllocPercent, tHsmdaPoolClass3Parent, tHsmdaPoolClass3AllocPercent, tHsmdaPoolClass4Parent, tHsmdaPoolClass4AllocPercent, tHsmdaPoolClass5Parent, tHsmdaPoolClass5AllocPercent, tHsmdaPoolClass6Parent, tHsmdaPoolClass6AllocPercent, tHsmdaPoolClass7Parent, tHsmdaPoolClass7AllocPercent, tHsmdaPoolClass8Parent, tHsmdaPoolClass8AllocPercent, tHsmdaSlopePolicyRowStatus, tHsmdaSlopeLastChanged, tHsmdaSlopeDescription, tHsmdaSlopeHiAdminStatus, tHsmdaSlopeHiStartDepth, tHsmdaSlopeHiMaxDepth, tHsmdaSlopeHiMaxProbability, tHsmdaSlopeLoAdminStatus, tHsmdaSlopeLoStartDepth, tHsmdaSlopeLoMaxDepth, tHsmdaSlopeLoMaxProbability, tSapEgrHsmdaQueueTblLastChngd, tHsmdaSchedPlcyTblLastChngd, tHsmdaSchedPlcyGrpTblLastChngd, tHsmdaPoolPlcyTblLastChngd, tHsmdaSlopePolicyTableLastChanged, tSapEgressDSCPRowStatus, tSapEgressDSCPLastChanged, tSapEgressDSCPHsmdaCntrOverride, tSapEgressPrecRowStatus, tSapEgressPrecLastChanged, tSapEgressPrecHsmdaCntrOverride, tSapEgrIPCritRowStatus, tSapEgrIPCritLastChanged, tSapEgrIPCritDescription, tSapEgrIPCritActionHsmdaCntrOvr, tSapEgrIPCritSourceIpAddrType, tSapEgrIPCritSourceIpAddr, tSapEgrIPCritSourceIpMask, tSapEgrIPCritDestIpAddrType, tSapEgrIPCritDestIpAddr, tSapEgrIPCritDestIpMask, tSapEgrIPCritProtocol, tSapEgrIPCritSourcePortValue1, tSapEgrIPCritSourcePortValue2, tSapEgrIPCritSourcePortOperator, tSapEgrIPCritDestPortValue1, tSapEgrIPCritDestPortValue2, tSapEgrIPCritDestPortOperator, tSapEgrIPCritDSCP, tSapEgrIPCritFragment, tSapEgressMatchCriteria, tSapEgressHsmdaPacketOffset, tSapEgrIPCritActionFC, tSapEgrIPCritActionProfile, tSapEgressDSCPfc, tSapEgressDSCPprofile, tSapEgressPrecFC, tSapEgressPrecProfile, tHsmdaSchedulerPlcyBrstLimit, tHsmdaSchedulerPlcyGrp1BrstLimit, tHsmdaSchedulerPlcyGrp2BrstLimit, tHsmdaSchedulerPlcyLvl1BrstLimit, tHsmdaSchedulerPlcyLvl2BrstLimit, tHsmdaSchedulerPlcyLvl3BrstLimit, tHsmdaSchedulerPlcyLvl4BrstLimit, tHsmdaSchedulerPlcyLvl5BrstLimit, tHsmdaSchedulerPlcyLvl6BrstLimit, tHsmdaSchedulerPlcyLvl7BrstLimit, tHsmdaSchedulerPlcyLvl8BrstLimit } STATUS current DESCRIPTION "The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 65 } tmnxQosNetworkV10v0Group OBJECT-GROUP OBJECTS { tNetworkEgressDSCPRowStatus, tNetworkEgressDSCPLastChanged, tNetworkEgressDSCPFC, tNetworkEgressDSCPProfile, tNetworkEgressPrecRowStatus, tNetworkEgressPrecLastChanged, tNetworkEgressPrecFC, tNetworkEgressPrecProfile, tNetworkEgrDSCPTableLastChanged, tNetworkEgrPrecTableLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 66 } tmnxQosSapIngressV10v0Group OBJECT-GROUP OBJECTS { tSapIngressRowStatus, tSapIngressScope, tSapIngressDescription, tSapIngressDefaultFC, tSapIngressDefaultFCPriority, tSapIngressMatchCriteria, tSapIngressLastChanged, tSapIngressTableLastChanged, tSapIngressQueueRowStatus, tSapIngressQueueParent, tSapIngressQueueLevel, tSapIngressQueueWeight, tSapIngressQueueCIRLevel, tSapIngressQueueCIRWeight, tSapIngressQueueMCast, tSapIngressQueueExpedite, tSapIngressQueueCBS, tSapIngressQueueHiPrioOnly, tSapIngressQueueCIRAdaptation, tSapIngressQueuePIRAdaptation, tSapIngressQueueAdminPIR, tSapIngressQueueAdminCIR, tSapIngressQueueLastChanged, tSapIngressQueueMode, tSapIngressQueuePoolName, tSapIngressQueueTableLastChanged, tSapIngressQueuePoliced, tSapIngressDSCPRowStatus, tSapIngressDSCPFC, tSapIngressDSCPPriority, tSapIngressDSCPLastChanged, tSapIngressDSCPTableLastChanged, tSapIngressDot1pRowStatus, tSapIngressDot1pFC, tSapIngressDot1pPriority, tSapIngressDot1pLastChanged, tSapIngressDot1pTableLastChanged, tSapIngressIPCriteriaRowStatus, tSapIngressIPCriteriaDescription, tSapIngressIPCriteriaActionFC, tSapIngressIPCriteriaActionPriority, tSapIngressIPCriteriaSourceIpAddr, tSapIngressIPCriteriaSourceIpMask, tSapIngressIPCriteriaDestIpAddr, tSapIngressIPCriteriaDestIpMask, tSapIngressIPCriteriaProtocol, tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2, tSapIngressIPCriteriaSourcePortOperator, tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2, tSapIngressIPCriteriaDestPortOperator, tSapIngressIPCriteriaDSCP, tSapIngressIPCriteriaFragment, tSapIngressIPCriteriaLastChanged, tSapIngressIPCriteriaTableLastChanged, tSapIngressMacCriteriaRowStatus, tSapIngressMacCriteriaDescription, tSapIngressMacCriteriaActionFC, tSapIngressMacCriteriaActionPriority, tSapIngressMacCriteriaFrameType, tSapIngressMacCriteriaSrcMacAddr, tSapIngressMacCriteriaSrcMacMask, tSapIngressMacCriteriaDstMacAddr, tSapIngressMacCriteriaDstMacMask, tSapIngressMacCriteriaDot1PValue, tSapIngressMacCriteriaDot1PMask, tSapIngressMacCriteriaEthernetType, tSapIngressMacCriteriaDSAP, tSapIngressMacCriteriaDSAPMask, tSapIngressMacCriteriaSSAP, tSapIngressMacCriteriaSSAPMask, tSapIngressMacCriteriaSnapPid, tSapIngressMacCriteriaSnapOui, tSapIngressMacCriteriaLastChanged, tSapIngressMacCriteriaTableLastChanged, tSapIngressFCRowStatus, tSapIngressFCQueue, tSapIngressFCMCastQueue, tSapIngressFCBCastQueue, tSapIngressFCUnknownQueue, tSapIngressFCLastChanged, tSapIngressFCInProfRemark, tSapIngressFCInProfDscp, tSapIngressFCInProfPrec, tSapIngressFCDE1OutOfProfile, tSapIngressFCOutProfRemark, tSapIngressFCOutProfDscp, tSapIngressFCOutProfPrec, tSapIngressFCProfile, tSapIngressFCTableLastChanged, tSapIngressPrecRowStatus, tSapIngressPrecFC, tSapIngressPrecFCPriority, tSapIngressPrecLastChanged, tSapIngressPrecTableLastChanged, tSapIngressLspExpRowStatus, tSapIngressLspExpLastChanged, tSapIngressLspExpFC, tSapIngressLspExpFCPriority, tSapIngressLspExpTableLastChange } STATUS current DESCRIPTION "The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 68 } tmnxQosHsmdaObsoletedV10v0Group OBJECT-GROUP OBJECTS { tHsmdaSlopeQueueMbs, tSapIngressHsmdaPacketOffset, tSapIngressFCHsmdaQueue, tSapIngressFCHsmdaMCastQueue, tSapIngressFCHsmdaBCastQueue, tSapIngressDefFCHsmdaCntrOvr, tSapIngressDot1pHsmdaCntrOvr, tSapIngressPrecHsmdaCntrOvr, tSapIngressDSCPHsmdaCntrOvr, tSapIngressLspExpHsmdaCntrOvr, tSapIngressIPCritHsmdaCntrOvr, tSapEgressHsmdaQueueCIRAdaptn, tSapEgressHsmdaQueueAdminCIR, tSapIngrHsmdaQueueTblLastChngd, tSapIngressHsmdaQueueRowStatus, tSapIngressHsmdaQueueLastChanged, tSapIngressHsmdaQueueCIRAdaptn, tSapIngressHsmdaQueuePIRAdaptn, tSapIngressHsmdaQueueAdminPIR, tSapIngressHsmdaQueueAdminCIR, tSapIngressHsmdaQueueSlopePolicy, tSapIngressHsmdaQueuePoliced } STATUS current DESCRIPTION "The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxQosGroups 69 } -- -- tmnxQosNotificationsGroup NOTIFICATION-GROUP -- NOTIFICATIONS { -- xxxx -- } -- -- tmnxQosNotificationsGroup NOTIFICATION-GROUP -- NOTIFICATIONS { -- xxxx -- } -- STATUS current -- DESCRIPTION -- "the group of notifications providing for xxxx" -- ::= { tmnxQosGroups X } -- END