All MIBs › BLADE-MIB
Category: Vendor: HP/HPE
Description: Provides base management objects for HP BladeSystem server blade chassis and blade modules.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BLADE-MIB?
BLADE-MIB is HP's foundational proprietary MIB for the BladeSystem architecture, covering the base management model shared across blade server chassis (enclosures) and the individual blade modules they hold. It defines the general object structure for chassis and blade identity, presence, and basic administrative/operational indicators, acting as a base layer beneath more detailed HP blade MIBs. It is used to monitor fundamental hardware presence and status — for example whether a given blade slot is occupied and in what basic operating state — serving as groundwork for hardware-health monitoring (power, thermal, fault) that HP implements in companion, more granular BladeSystem MIBs. It commonly underpins or is referenced by other HP BladeSystem management MIBs that build detailed power, thermal, and interconnect monitoring atop this base OID structure. It is deployed in HP BladeSystem c-Class and p-Class enclosures within enterprise data centers, typically managed through HP Systems Insight Manager or generic SNMP tooling.
IPNetwork Monitor allows you to monitor SNMP objects defined in BLADE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- IBM BladeCenter Management Module (MM) chassis and blade hardware (legacy)
Monitoring Examples
No sample objects were supplied for this module, so a concrete OID-level example cannot be honestly constructed. Conceptually, an administrator would use this MIB's base objects to enumerate populated blade slots and their basic status within a chassis, flagging a slot that reports missing or in a non-normal state as needing physical inspection. Detailed hardware telemetry (temperature, fan speed, power draw) would typically come from a companion HP blade MIB rather than this base module.
What Can Be Monitored
- blade slot presence
- chassis identity
- basic blade/chassis administrative status
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT acousticMode | 1.3.6.1.4.1.2.3.51.2.22.1.7.2.3 | INTEGER | read-write | Acoustic mode setting for thermal conditions |
| INT allowModemLogin | 1.3.6.1.4.1.2.3.51.2.4.1.1.8 | INTEGER | read-write | Allow the user login through modem connection |
| ambientTemp | 1.3.6.1.4.1.2.3.51.2.2.1.5 | |||
| INT attachmentsToEmailAlerts | 1.3.6.1.4.1.2.3.51.2.4.9.3.3.2 | INTEGER | read-write | Indicates if the event log should be attached to an email alert. |
| OCT bistBladesCommunicating | 1.3.6.1.4.1.2.3.51.2.2.5.2.49 | OCTET STRING | read-only | The blades that are communicating on the chassis. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blades supported. If a blade installed in a bay is communicating, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if blades are communicating in bays 1, 5, and 13, and 14 blades are supported, the string would look like '10001000000010'. |
| OCT bistBladesInstalled | 1.3.6.1.4.1.2.3.51.2.2.5.2.33 | OCTET STRING | read-only | The blades that are installed on the chassis. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blades supported. If a blade is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if blades are installed in bays 1, 5, and 13, and 14 blades are supported, the string would look like '10001000000010'. |
| OCT bistBlowersFunctional | 1.3.6.1.4.1.2.3.51.2.2.5.2.73 | OCTET STRING | read-only | The blowers installed on the chassis that are functional. The blowers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blowers supported. If a blower is installed and functional in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if a blower is installed and functional only in bay 1, and 2 blowers are supported, the string would look like '10'. |
| OCT bistBlowersInstalled | 1.3.6.1.4.1.2.3.51.2.2.5.2.65 | OCTET STRING | read-only | The blowers that are installed on the chassis. The blowers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blowers supported. If a blower is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if a blower is installed in bay 1, and 2 blowers are supported, the string would look like '10'. |
| INT bistBootRomFlashImage | 1.3.6.1.4.1.2.3.51.2.2.5.2.10 | INTEGER | read-only | Sp BIST Com 2test result. |
| INT bistEthernetPort1 | 1.3.6.1.4.1.2.3.51.2.2.5.2.11 | INTEGER | read-only | Sp BIST external ethernet - internal wrap test result. |
| INT bistEthernetPort2 | 1.3.6.1.4.1.2.3.51.2.2.5.2.12 | INTEGER | read-only | Sp BIST external ethernet - external wrap test result. |
| INT bistExternalI2CDevices | 1.3.6.1.4.1.2.3.51.2.2.5.2.14 | INTEGER | read-only | Sp BIST I2C controller test result. |
| INT bistInternalEthernetSwitch | 1.3.6.1.4.1.2.3.51.2.2.5.2.18 | INTEGER | read-only | Sp BIST I2C controller test result. |
| INT bistInternalPCIBus | 1.3.6.1.4.1.2.3.51.2.2.5.2.13 | INTEGER | read-only | Sp BIST I2C controller test result. |
| INT bistLocalI2CBus | 1.3.6.1.4.1.2.3.51.2.2.5.2.7 | INTEGER | read-only | Sp BIST I2C controller test result. |
| INT bistMediaTrayCommunicating | 1.3.6.1.4.1.2.3.51.2.2.5.2.75 | INTEGER | read-only | Indicates whether a media tray is communicating. |
| INT bistMediaTrayInstalled | 1.3.6.1.4.1.2.3.51.2.2.5.2.74 | INTEGER | read-only | Indicates whether a media tray is installed on the chassis. |
| INT bistNvram | 1.3.6.1.4.1.2.3.51.2.2.5.2.4 | INTEGER | read-only | Sp BIST NVRAM test result. |
| OCT bistPowerModulesFunctional | 1.3.6.1.4.1.2.3.51.2.2.5.2.89 | OCTET STRING | read-only | The power modules that are functional on the chassis. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of power modules supported. If a power module is installed and functioning in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if power modules are installed and functioning in bays 1 and 3, and 4 power modules are supported, the string would look like '1010'. |
| OCT bistPowerModulesInstalled | 1.3.6.1.4.1.2.3.51.2.2.5.2.81 | OCTET STRING | read-only | The power modules that are installed on the chassis. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of power modules supported. If a power module is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if power modules are installed in bays 1 and 3, and 4 power modules are supported, the string would look like '1010'. |
| INT bistPrimaryBus | 1.3.6.1.4.1.2.3.51.2.2.5.2.17 | INTEGER | read-only | Sp BIST I2C controller test result. |
| INT bistPrimaryMainAppFlashImage | 1.3.6.1.4.1.2.3.51.2.2.5.2.8 | INTEGER | read-only | Sp BIST Com 2test result. |
| INT bistRs485Port1 | 1.3.6.1.4.1.2.3.51.2.2.5.2.2 | INTEGER | read-only | Sp BIST RS 485 legacy test result. |
| INT bistRs485Port2 | 1.3.6.1.4.1.2.3.51.2.2.5.2.3 | INTEGER | read-only | Sp BIST RS 485 local bus test result. |
| INT bistRtc | 1.3.6.1.4.1.2.3.51.2.2.5.2.6 | INTEGER | read-only | Sp BIST RTC test result. |
| INT bistSdram | 1.3.6.1.4.1.2.3.51.2.2.5.2.1 | INTEGER | read-only | Sp BIST DRAM test result. |
| INT bistSecondaryMainAppFlashImage | 1.3.6.1.4.1.2.3.51.2.2.5.2.9 | INTEGER | read-only | Sp BIST Com 2test result. |
| OCT bistSwitchModulesCommunicating | 1.3.6.1.4.1.2.3.51.2.2.5.2.113 | OCTET STRING | read-only | The switch modules that are communicating on the chassis. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of switch modules supported. If a switch module is installed and functioning in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if switch modules are installed and functioning in bays 1 and 3, and 4 switch modules are supported, the string would look like '1010'. |
| OCT bistSwitchModulesInstalled | 1.3.6.1.4.1.2.3.51.2.2.5.2.97 | OCTET STRING | read-only | The switch modules that are installed on the chassis. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of switch modules supported. If a switch module is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if switch modules are installed in bays 1 and 3, and 4 switch modules are supported, the string would look like '1010'. |
| INT bistUSBController | 1.3.6.1.4.1.2.3.51.2.2.5.2.15 | INTEGER | read-only | Sp BIST I2C controller test result. |
| INT bistVideoCompressorBoard | 1.3.6.1.4.1.2.3.51.2.2.5.2.16 | INTEGER | read-only | Sp BIST I2C controller test result. |
| OCT bladeBiosVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.6 | OCTET STRING | read-only | The build ID for the blade firmware. |
| OCT bladeBiosVpdDate | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.8 | OCTET STRING | read-only | The date of the blade firmware. |
| bladeBiosVPDEntry | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1 | not-accessible | Blade firmware VPD table entry | |
| INT bladeBiosVpdExists | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT bladeBiosVpdId | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| INT bladeBiosVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.1 | INTEGER | read-only | Blade firmware VPD table index. |
| OCT bladeBiosVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.5 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT bladeBiosVpdPowerState | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| OCT bladeBiosVpdRevision | 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.7 | OCTET STRING | read-only | The revision of the blade firmware. |
| bladeBiosVPDTable | 1.3.6.1.4.1.2.3.51.2.2.21.5.1 | not-accessible | Table of blade firmware vital product data (VPD) information. | |
| bladeBootCountPowerOnTime | 1.3.6.1.4.1.2.3.51.2.22.1.10 | |||
| bladeBootCountPowerOnTimeEntry | 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1 | not-accessible | The number of boots for the blade and the number of seconds the blade has been powered on. | |
| bladeBootCountPowerOnTimeTable | 1.3.6.1.4.1.2.3.51.2.22.1.10.1 | not-accessible | Table per blade of the number of boots for the blade and the number of seconds the blade has been powered on. | |
| bladeBootSequenceEntry | 1.3.6.1.4.1.2.3.51.2.22.1.3.1 | not-accessible | Boot sequence entry | |
| bladeBootSequenceTable | 1.3.6.1.4.1.2.3.51.2.22.1.3 | not-accessible | Table of blade boot sequence information. Contains the boot sequence information for each blade. | |
| bladeCapacityOnDemand | 1.3.6.1.4.1.2.3.51.2.22.1.9 | |||
| OCT bladeCapacityOnDemandBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1.2 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| bladeCapacityOnDemandEntry | 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1 | not-accessible | Blade COD table entry | |
| INT bladeCapacityOnDemandIndex | 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1.1 | INTEGER | read-only | Blade configuration table index. |
| INT bladeCapacityOnDemandState | 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1.3 | INTEGER | read-write | The state of COD. |
| bladeCapacityOnDemandTable | 1.3.6.1.4.1.2.3.51.2.22.1.9.1 | not-accessible | Table of COD blade. | |
| bladeCenter | 1.3.6.1.4.1.2.3.51.2.22 | |||
| OCT bladeCenterFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.7 | OCTET STRING | read-only | Machine chassis FRU number. |
| OCT bladeCenterFruSerial | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.10 | OCTET STRING | read-only | Machine chassis FRU serial. |
| INT bladeCenterHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.6 | INTEGER | read-only | Machine chassis hardware revision. |
| OCT bladeCenterManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.5 | OCTET STRING | read-only | Machine chassis manufacturing ID. |
| OCT bladeCenterManufDate | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.8 | OCTET STRING | read-only | Machine chassis manufature date. |
| OCT bladeCenterPartNumber | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.9 | OCTET STRING | read-only | Machine chassis part number. |
| OCT bladeCenterSerialNumber | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.3 | OCTET STRING | read-only | Machine serial number VPD information (from System BIOS). |
| bladeCenterSnmpMIB | 1.3.6.1.4.1.2.3.51.2 | |||
| OCT bladeCenterUUID | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.4 | OCTET STRING | read-only | Machine UUID (Universal Unique ID information) (from System BIOS). |
| bladeCenterVpd | 1.3.6.1.4.1.2.3.51.2.2.21.1.1 | |||
| OCT bladeCenterVpdMachineModel | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.2 | OCTET STRING | read-only | Machine model VPD information (from System BIOS). |
| OCT bladeCenterVpdMachineType | 1.3.6.1.4.1.2.3.51.2.2.21.1.1.1 | OCTET STRING | read-only | Machine type VPD information (from System BIOS). |
| bladeConfiguration | 1.3.6.1.4.1.2.3.51.2.22.1.7 | |||
| bladeConfigurationEntry | 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1 | not-accessible | Blade configuration table entry | |
| bladeConfigurationTable | 1.3.6.1.4.1.2.3.51.2.22.1.7.1 | not-accessible | Table of blade remote power control information. Contains power on/off enablement status for each blade. | |
| INT bladeConnectionType | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.10 | INTEGER | read-only | Connection type for the blade server. 0 = none, 1 = ethernet, 2 = fiber |
| OCT bladeDaughterCard1MACAddress1Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.10 | OCTET STRING | read-only | Blade server Daughter Card 1 MAC address 1. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard1MACAddress2Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.11 | OCTET STRING | read-only | Blade server Daughter Card 1 MAC address 2. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard1MACAddress3Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.12 | OCTET STRING | read-only | Blade server daughter card 1 MAC address 3. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard1MACAddress4Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.13 | OCTET STRING | read-only | Blade server daughter card 1 MAC address 4. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard2MACAddress1Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.18 | OCTET STRING | read-only | Blade server daughter card 2 MAC address 1. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard2MACAddress2Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.19 | OCTET STRING | read-only | Blade server daughter card 2 MAC address 2. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard2MACAddress3Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.20 | OCTET STRING | read-only | Blade server daughter card 2 MAC address 3. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterCard2MACAddress4Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.21 | OCTET STRING | read-only | Blade server daughter card 2 MAC address 4. For consistent results, view as a table and not as individual entries. |
| INT bladeDaughterVpdCardType | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.20 | INTEGER | read-only | Blade daughter card VPD Type Code. Describes what the blade or module is. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.22 | OCTET STRING | read-only | Blade daughter card VPD FRU number. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdFruSerial | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.29 | OCTET STRING | read-only | Blade daughter VPD FRU Serial. For consistent results, view as a table and not as individual entries. |
| INT bladeDaughterVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.23 | INTEGER | read-only | Blade daughter card VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdMachineType | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.25 | OCTET STRING | read-only | Blade daughter card VPD Machine type. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.21 | OCTET STRING | read-only | Blade daughter card VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdManufDate | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.27 | OCTET STRING | read-only | Blade daughter VPD Manufacture date. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdPartNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.28 | OCTET STRING | read-only | Blade daughter VPD Part number. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdSerialNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.24 | OCTET STRING | read-only | Blade daughter card VPD Serial number. For consistent results, view as a table and not as individual entries. |
| OCT bladeDaughterVpdUuid | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.26 | OCTET STRING | read-only | Blade daughter VPD UUID. For consistent results, view as a table and not as individual entries. |
| OCT bladeDiagsVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.6 | OCTET STRING | read-only | The build ID for the blade firmware. |
| OCT bladeDiagsVpdDate | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.8 | OCTET STRING | read-only | The date of the blade firmware. |
| bladeDiagsVPDEntry | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1 | not-accessible | Blade firmware VPD table entry | |
| INT bladeDiagsVpdExists | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT bladeDiagsVpdId | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.2 | INTEGER | read-only | The numeric blade ID. |
| INT bladeDiagsVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.1 | INTEGER | read-only | Blade firmware VPD table index. |
| OCT bladeDiagsVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.5 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT bladeDiagsVpdPowerState | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| OCT bladeDiagsVpdRevision | 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.7 | OCTET STRING | read-only | The revision of the blade firmware. |
| bladeDiagsVPDTable | 1.3.6.1.4.1.2.3.51.2.2.21.5.2 | not-accessible | Table of blade firmware vital product data (VPD) information. | |
| INT bladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| bladeFirmwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.5 | |||
| bladeHardwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.4 | |||
| OCT bladeHardwareVpdBayNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.2 | OCTET STRING | read-only | Blade hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| bladeHardwareVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1 | not-accessible | Blade server hardware VPD entry. For consistent results, view as a table and not as individual entries. | |
| OCT bladeHardwareVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.4 | OCTET STRING | read-only | Blade hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| OCT bladeHardwareVpdFruSerial | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.11 | OCTET STRING | read-only | Blade hardware VPD FRU serial. For consistent results, view as a table and not as individual entries. |
| INT bladeHardwareVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.5 | INTEGER | read-only | Blade hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| INT bladeHardwareVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.1 | INTEGER | read-only | Blade hardware VPD index. For consistent results, view as a table and not as individual entries. |
| OCT bladeHardwareVpdMachineType | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.7 | OCTET STRING | read-only | Blade hardware VPD machine type. For consistent results, view as a table and not as individual entries. |
| OCT bladeHardwareVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.3 | OCTET STRING | read-only | Blade hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT bladeHardwareVpdManufDate | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.9 | OCTET STRING | read-only | Blade hardware VPD Manufature Date. For consistent results, view as a table and not as individual entries. |
| OCT bladeHardwareVpdPartNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.10 | OCTET STRING | read-only | Blade hardware VPD Part number. For consistent results, view as a table and not as individual entries. |
| OCT bladeHardwareVpdSerialNumber | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.6 | OCTET STRING | read-only | Blade hardware VPD serial number. For consistent results, view as a table and not as individual entries. |
| bladeHardwareVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.4.1 | not-accessible | Table of VPD information for the blade server hardware components. For consistent results, view as a table and not as individual entries. | |
| OCT bladeHardwareVpdUuid | 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.8 | OCTET STRING | read-only | Blade hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| INT bladeHealthState | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.5 | INTEGER | read-only | The system health state for the blade server. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| INT bladeHealthSummaryBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT bladeHealthSummaryDescription | 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.4 | OCTET STRING | read-only | System health summary description. |
| bladeHealthSummaryEntry | 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1 | not-accessible | Blade health summary entry | |
| INT bladeHealthSummaryIndex | 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.1 | INTEGER | read-only | Blade health summary index. |
| OCT bladeHealthSummarySeverity | 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.3 | OCTET STRING | read-only | System health summary severity. |
| bladeHealthSummaryTable | 1.3.6.1.4.1.2.3.51.2.22.1.5.2 | not-accessible | Table of blade health summary information. Contains information about the overall blade health status. | |
| INT bladeId | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| IP bladeIPAddrRangeStart | 1.3.6.1.4.1.2.3.51.2.22.1.8 | IpAddress | read-write | Configure IP address range for all the blades. Example: the start IP address range of value 10.1.1.1 will make blade 1 to have IP address 10.1.1.1, blade 2 to have 10.1.1.2 and so on. |
| INT bladeKVMBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.2 | INTEGER | read-write | Allocate the keyboard, video, and mouse ports (KVM) to a blade of a blade runner system. On a get command, a blade ID of 0x00 means that no blade is currently using the devices. A set command cannot allocate the KVM to the management module. |
| bladeLEDs | 1.3.6.1.4.1.2.3.51.2.2.8.2 | |||
| bladeLEDsEntry | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1 | not-accessible | Blade system status entry | |
| bladeLEDsTable | 1.3.6.1.4.1.2.3.51.2.2.8.2.1 | not-accessible | Table of blade status information. | |
| OCT bladeMACAddress1Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.2 | OCTET STRING | read-only | Blade server MAC address 1. For consistent results, view as a table and not as individual entries. |
| OCT bladeMACAddress2Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.3 | OCTET STRING | read-only | Blade server MAC address 2. For consistent results, view as a table and not as individual entries. |
| OCT bladeMACAddress3Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.4 | OCTET STRING | read-only | Blade server MAC address 3. For consistent results, view as a table and not as individual entries. |
| OCT bladeMACAddress4Vpd | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.5 | OCTET STRING | read-only | Blade server MAC address 4. For consistent results, view as a table and not as individual entries. |
| bladeMACAddressVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1 | not-accessible | Blade server MAC address entry. For consistent results, view as a table and not as individual entries. | |
| INT bladeMACAddressVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.1 | INTEGER | read-only | Blade server index. For consistent results, view as a table and not as individual entries. |
| bladeMACAddressVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.4.2 | not-accessible | Table of MAC addresses of the blade server and its daughter cards. For consistent results, view as a table and not as individual entries. | |
| INT bladeMediaTrayBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.1 | INTEGER | read-write | Allocate the media tray to a blade of a BladeCenter system. On a get command, a blade ID of 0x00 means that no blade is currently using the device. A set command cannot allocate the media tray to the management module. |
| bladeMonitors | 1.3.6.1.4.1.2.3.51.2.22.1.5 | |||
| OCT bladeName | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.6 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT bladeOwnsKVM | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.11 | INTEGER | read-only | Indicates whether the MM owns the KVM. 0 = false, 1 = true. Note that some types of blades don't support KVM |
| INT bladeOwnsMediaTray | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.12 | INTEGER | read-only | Indicates whether the blade owns the Media Tray. 0 = false, 1 = true. |
| OCT bladePlus12Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.8 | OCTET STRING | read-only | +12 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus12VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.10 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus12VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.11 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus1pt25Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.12 | OCTET STRING | read-only | +1.25 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus1pt25VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.18 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus1pt25VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.19 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus1pt5Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.11 | OCTET STRING | read-only | +1.5 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus1pt5VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.16 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus1pt5VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.17 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus2pt5Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.10 | OCTET STRING | read-only | +2.5 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus2pt5VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.14 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus2pt5VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.15 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus3pt3Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.7 | OCTET STRING | read-only | +3.3 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus3pt3VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.8 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus3pt3VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.9 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus5Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.6 | OCTET STRING | read-only | +5 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus5VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.6 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladePlus5VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.7 | OCTET STRING | read-only | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| bladePolicy | 1.3.6.1.4.1.2.3.51.2.22.1.4.2 | |||
| INT bladePolicyKVMControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.2.3 | INTEGER | read-write | Blade KVM enablement status policy. Note that some types of blades don't support KVM. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT bladePolicyMediaTrayControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.2.2 | INTEGER | read-write | Blade media tray enablement status policy. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT bladePolicyPowerControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.2.1 | INTEGER | read-write | Blade remote power control enablement status policy. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT bladePolicyWakeOnLanControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.2.4 | INTEGER | read-write | Blade Wake On Lan enablement status policy. NOTE: Value returned for the GET command is meaningless for this MIB. |
| bladePowerManagementPolicy | 1.3.6.1.4.1.2.3.51.2.22.1.7.2 | |||
| bladePowerRestart | 1.3.6.1.4.1.2.3.51.2.22.1.6 | |||
| bladePowerRestartEntry | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1 | not-accessible | Blade power restart table entry | |
| bladePowerRestartTable | 1.3.6.1.4.1.2.3.51.2.22.1.6.1 | not-accessible | Table of blade remote power control information. Contains power on/off enablement status for each blade. | |
| INT bladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| bladeRemoteControl | 1.3.6.1.4.1.2.3.51.2.22.1.4 | |||
| bladeRemoteControlEntry | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1 | not-accessible | Remote power control entry | |
| bladeRemoteControlTable | 1.3.6.1.4.1.2.3.51.2.22.1.4.1 | not-accessible | Table of blade remote power control information. Contains power on/off enablement status for each blade. | |
| INT bladeRemoteKVMEnable | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.9 | INTEGER | read-only | Remote keyboard/video/monitor state for the blade server. 0x01 indicates enabled. Note that some types of blades don't support KVM |
| INT bladeRemoteMediaTrayEnable | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.8 | INTEGER | read-only | Remote Media Tray state for the blade server. 0x01 indicates enabled. |
| INT bladeRemotePowerEnable | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.7 | INTEGER | read-only | Remote power state for the blade server. 0x01 indicates enabled. |
| INT bladeRemoteWakeOnLanEnable | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.13 | INTEGER | read-only | Remote wake on LAN state for the blade server. 0x01 indicates enabled. |
| OCT bladeSensor10Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.24 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor10VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.41 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor10VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.42 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor11Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.25 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor11VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.43 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor11VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.44 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor12Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.26 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor12VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.45 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor12VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.46 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor13Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.27 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor13VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.47 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor13VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.48 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor14Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.28 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor14VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.49 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor14VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.50 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor15Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.29 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor15VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.51 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor15VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.52 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor16Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.30 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor16VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.53 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor16VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.54 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor17Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.31 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor17VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.55 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor17VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.56 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor18Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.32 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor18VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.57 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor18VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.58 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor19Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.33 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor19VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.59 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor19VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.60 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor1Temp | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.12 | OCTET STRING | read-only | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor1Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.15 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor1VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.23 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor1VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.24 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor20Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.34 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor20VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.61 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor20VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.62 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor21Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.35 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor21VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.63 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor21VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.64 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor22Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.36 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor22VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.65 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor22VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.66 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor23Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.37 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor23VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.67 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor23VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.68 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor24Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.38 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor24VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.69 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor24VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.70 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor25Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.39 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor25VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.71 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor25VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.72 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor26Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.40 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor26VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.73 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor26VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.74 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor27Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.41 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor27VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.75 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor27VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.76 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor28Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.42 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor28VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.77 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor28VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.78 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor29Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.43 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor29VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.79 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor29VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.80 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor2Temp | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.13 | OCTET STRING | read-only | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor2Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.16 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor2VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.25 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor2VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.26 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor30Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.44 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor30VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.81 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor30VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.82 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor3Temp | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.14 | OCTET STRING | read-only | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor3Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.17 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor3VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.27 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor3VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.28 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor4Temp | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.15 | OCTET STRING | read-only | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor4Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.18 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor4VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.29 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor4VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.30 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor5Temp | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.16 | OCTET STRING | read-only | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor5Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.19 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor5VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.31 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor5VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.32 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor6Temp | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.17 | OCTET STRING | read-only | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor6Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.20 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor6VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.33 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor6VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.34 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor7Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.21 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor7VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.35 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor7VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.36 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor8Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.22 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor8VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.37 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor8VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.38 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor9Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.23 | OCTET STRING | read-only | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor9VoltHighWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.39 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| OCT bladeSensor9VoltLowWarning | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.40 | OCTET STRING | read-only | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| INT bladeSensorTempCapability | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.11 | INTEGER | read-only | Indicates whether the server blade is IPMI capable or not. |
| INT bladeSensorVoltCapability | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.14 | INTEGER | read-only | Indicates whether the server blade is IPMI capable or not. |
| INT bladeServerExpansion | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.14 | INTEGER | read-only | This shows whether this blade server has a blade server expansion attached. A yes column indicates that a blade storage expansion is installed for this blade server. |
| INT bladeStatusIndex | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.1 | INTEGER | read-only | Blade system status index. |
| INT bladeSupportCapacityOnDemand | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.16 | INTEGER | read-only | This shows whether this blade server support Capacity On Demand. |
| OCT bladeSysMgmtProcVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.6 | OCTET STRING | read-only | The build ID for the blade firmware. |
| bladeSysMgmtProcVPDEntry | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1 | not-accessible | Blade firmware VPD table entry | |
| INT bladeSysMgmtProcVpdExists | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT bladeSysMgmtProcVpdId | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.2 | INTEGER | read-only | The numeric blade ID. |
| INT bladeSysMgmtProcVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.1 | INTEGER | read-only | Blade firmware VPD table index. |
| OCT bladeSysMgmtProcVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.5 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT bladeSysMgmtProcVpdPowerState | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| OCT bladeSysMgmtProcVpdRevision | 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.7 | OCTET STRING | read-only | The revision of the blade firmware. |
| bladeSysMgmtProcVPDTable | 1.3.6.1.4.1.2.3.51.2.2.21.5.3 | not-accessible | Table of blade firmware vital product data (VPD) information. | |
| bladeSystemStatusEntry | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1 | not-accessible | Blade system status entry | |
| bladeSystemStatusTable | 1.3.6.1.4.1.2.3.51.2.22.1.5.1 | not-accessible | Table of blade status information. | |
| bladeTemperaturesEntry | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1 | not-accessible | Blade temperatures table entry | |
| bladeTemperaturesTable | 1.3.6.1.4.1.2.3.51.2.22.1.5.3 | not-accessible | Table of blade temperatures information. | |
| bladeTemperatureThresholdsEntry | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | not-accessible | Blade temperature thresholds table entry | |
| bladeTemperatureThresholdsTable | 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | not-accessible | Table of blade temperature thresholds information. | |
| INT bladeTempThresholdSensorCapability | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.21 | INTEGER | read-only | Indicates whether the server blade is IPMI capable or not. |
| bladeVoltagesEntry | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1 | not-accessible | Blade voltages table entry | |
| bladeVoltagesTable | 1.3.6.1.4.1.2.3.51.2.22.1.5.5 | not-accessible | Table of blade voltages information. | |
| bladeVoltageThresholdsEntry | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1 | not-accessible | Blade voltage thresholds table entry | |
| bladeVoltageThresholdsTable | 1.3.6.1.4.1.2.3.51.2.22.1.5.6 | not-accessible | Table of blade VoltageThresholds information. | |
| INT bladeVoltThresholdSensorCapability | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.22 | INTEGER | read-only | Indicates whether the server blade is IPMI capable or not. |
| OCT bladeVRM1Volt | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.13 | OCTET STRING | read-only | VRM 1 voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Voltage' indicates that the given monitor does not exist on this system or is powered off. |
| INT bladeWidth | 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.15 | INTEGER | read-only | The width of the blade including any supplement blade attached to it |
| OCT blower1speed | 1.3.6.1.4.1.2.3.51.2.2.3.1 | OCTET STRING | read-only | Blower 1 speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading zero. If the blower is determined not to be running or the blower speed cannot be determined, the string will indicate 'Offline'. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| INT blower1State | 1.3.6.1.4.1.2.3.51.2.2.3.10 | INTEGER | read-only | The health state for blower 1. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| OCT blower2speed | 1.3.6.1.4.1.2.3.51.2.2.3.2 | OCTET STRING | read-only | Blower 2 speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading zero. If the blower is determined not to be running or the blower speed cannot be determined, the string will indicate 'Offline'. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| INT blower2State | 1.3.6.1.4.1.2.3.51.2.2.3.11 | INTEGER | read-only | The health state for blower 2. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| blowers | 1.3.6.1.4.1.2.3.51.2.2.3 | |||
| INT bootCountPowerOnTimeBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| INT bootCountPowerOnTimeBladeIndex | 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.1 | INTEGER | read-only | Blade boot count/Power On Time table index. |
| INT bootCountPowerOnTimeBoots | 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.3 | INTEGER | read-write | Blade Boot Count. If there is no blade in the given slot then this value is undefined. Writing this value resets the Boot Count to zero. |
| INT bootCountPowerOnTimeSecs | 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.4 | INTEGER | read-write | Blade Power On Time in seconds. If there is no blade in the given slot then this value is undefined. Writing this value resets the Power On Time to zero. |
| INT bootSequence1 | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7 | INTEGER | read-write | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, and 4 be configured starting from boot sequence 1. If there is any duplication of the configured boot sequence and the current configuration, the two boot sequence will be swapped. For an example: the current boot sequence is 1=HD0, 2=CD, 3=FD, 4=HD1 If the user wants to configure 1=FD which is a duplication of 3 then the new boot sequence will be: 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped) |
| INT bootSequence2 | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.8 | INTEGER | read-write | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, and 4 be configured starting from boot sequence 1. If there is any duplication of the configured boot sequence and the current configuration, the two boot sequence will be swapped. For an example: the current boot sequence is 1=HD0, 2=CD, 3=FD, 4=HD1 If the user wants to configure 1=FD which is a duplication of 3 then the new boot sequence will be: 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped) |
| INT bootSequence3 | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.9 | INTEGER | read-write | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, and 4 be configured starting from boot sequence 1. If there is any duplication of the configured boot sequence and the current configuration, the two boot sequence will be swapped. For an example: the current boot sequence is 1=HD0, 2=CD, 3=FD, 4=HD1 If the user wants to configure 1=FD which is a duplication of 3 then the new boot sequence will be: 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped) |
| INT bootSequence4 | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.10 | INTEGER | read-write | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, and 4 be configured starting from boot sequence 1. If there is any duplication of the configured boot sequence and the current configuration, the two boot sequence will be swapped. For an example: the current boot sequence is 1=HD0, 2=CD, 3=FD, 4=HD1 If the user wants to configure 1=FD which is a duplication of 3 then the new boot sequence will be: 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped) |
| INT bootSequenceBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT bootSequenceBladeHealthState | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.5 | INTEGER | read-only | The system health state for the blade server. 1 = good, 2 = warning, 3 = bad. |
| INT bootSequenceBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT bootSequenceBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.6 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT bootSequenceBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| INT bootSequenceIndex | 1.3.6.1.4.1.2.3.51.2.22.1.3.1.1 | INTEGER | read-only | Blade boot sequence index. |
| INT chassisActiveMM | 1.3.6.1.4.1.2.3.51.2.22.4.34 | INTEGER | read-only | The active management module (MM). |
| OCT chassisBlowersInstalled | 1.3.6.1.4.1.2.3.51.2.22.4.33 | OCTET STRING | read-only | The blowers that are installed on the chassis. The blowers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blowers supported. If a blower is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if a blower is installed in bay 1, and 2 blowers are supported, the string would look like '10'. |
| INT chassisFlags | 1.3.6.1.4.1.2.3.51.2.22.4.2 | INTEGER | read-only | Chassis flags. 1 = a server blade chassis, 0 = a rack or standalone chassis. |
| INT chassisKVMOwner | 1.3.6.1.4.1.2.3.51.2.22.4.35 | INTEGER | read-only | The blade that currently owns the keyboard/video/monitor (KVM). 0 = the KVM devices are owned by the management module. |
| INT chassisMediaTrayOwner | 1.3.6.1.4.1.2.3.51.2.22.4.36 | INTEGER | read-only | The blade that currently owns the media tray. 0 = the media tray is owned by the management module. |
| OCT chassisMMsInstalled | 1.3.6.1.4.1.2.3.51.2.22.4.30 | OCTET STRING | read-only | The management modules that are installed on the chassis. The management modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of management modules supported. If a management module is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if a management module is installed in bay 1, and 2 management modules are supported, the string would look like '10'. |
| INT chassisMTInstalled | 1.3.6.1.4.1.2.3.51.2.22.4.32 | INTEGER | read-only | Indicates whether a media tray (MT) is installed. |
| OCT chassisName | 1.3.6.1.4.1.2.3.51.2.22.4.3 | OCTET STRING | read-only | The name of the chassis as a null terminated string. |
| INT chassisNoOfBlowersSupported | 1.3.6.1.4.1.2.3.51.2.22.4.24 | INTEGER | read-only | Number of blowers supported. |
| INT chassisNoOfMMsSupported | 1.3.6.1.4.1.2.3.51.2.22.4.21 | INTEGER | read-only | Number of management modules (MMs) supported. |
| INT chassisNoOfMTsSupported | 1.3.6.1.4.1.2.3.51.2.22.4.23 | INTEGER | read-only | Number of media trays (MTs) supported. |
| INT chassisNoOfPBsSupported | 1.3.6.1.4.1.2.3.51.2.22.4.19 | INTEGER | read-only | Number of processor blades (PBs) supported. |
| INT chassisNoOfPMsSupported | 1.3.6.1.4.1.2.3.51.2.22.4.22 | INTEGER | read-only | Number of processor modules (PMs) supported. |
| INT chassisNoOfSMsSupported | 1.3.6.1.4.1.2.3.51.2.22.4.20 | INTEGER | read-only | Number of switch modules (SMs) supported. |
| OCT chassisPBsInstalled | 1.3.6.1.4.1.2.3.51.2.22.4.25 | OCTET STRING | read-only | The blades that are installed on the chassis. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blades supported. If a blade is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if blades are installed in bays 1, 5, and 13, and 14 blades are supported, the string would look like '10001000000010'. |
| OCT chassisPMsInstalled | 1.3.6.1.4.1.2.3.51.2.22.4.31 | OCTET STRING | read-only | The power modules that are installed on the chassis. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of power modules supported. If a power module is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if power modules are installed in bays 1 and 3, and 4 power modules are supported, the string would look like '1010'. |
| INT chassisResponseVersion | 1.3.6.1.4.1.2.3.51.2.22.4.1 | INTEGER | read-only | Chassis response version. |
| OCT chassisSMsInstalled | 1.3.6.1.4.1.2.3.51.2.22.4.29 | OCTET STRING | read-only | The switch modules that are installed on the chassis. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of switch modules supported. If a switch module is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if switch modules are installed in bays 1 and 3, and 4 switch modules are supported, the string would look like '1010'. |
| chassisTopology | 1.3.6.1.4.1.2.3.51.2.22.4 | |||
| chassisVpd | 1.3.6.1.4.1.2.3.51.2.2.21.1 | |||
| INT clearEventLog | 1.3.6.1.4.1.2.3.51.2.3.4.3 | INTEGER | read-write | Clear the event log. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT commandModeEnable | 1.3.6.1.4.1.2.3.51.2.4.9.3.4.4 | INTEGER | read-write | Disable/Enable TCP Command Mode. |
| INT commandModeInactivityTimeout | 1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 | INTEGER | read-write | Default is zero means no timeout. Max value is any positive 4 bytes value. |
| OCT componentLevelActivityVpdAction | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.9 | OCTET STRING | read-only | System component level VPD activity log action (added/removed). For consistent results, view as a table and not as individual entries. |
| OCT componentLevelActivityVpdBayNumber | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.5 | OCTET STRING | read-only | System component level VPD activity log Bay number. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelActivityVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.2 | OCTET STRING | read-only | System component level VPD activity log FRU number. For consistent results, view as a table and not as individual entries. |
| INT componentLevelActivityVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.1 | INTEGER | read-only | System component level VPD activity log index. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelActivityVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.4 | OCTET STRING | read-only | System component level VPD activity log manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelActivityVpdSerialNumber | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.3 | OCTET STRING | read-only | System component level VPD activity log serial number. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelActivityVpdTimestamp | 1.3.6.1.4.1.2.3.51.2.2.21.22.1.10 | OCTET STRING | read-only | System component level VPD activity log timestamp. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelVpdBayNumber | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.5 | OCTET STRING | read-only | System component level VPD Bay number. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.2 | OCTET STRING | read-only | System component level VPD FRU number. For consistent results, view as a table and not as individual entries. |
| INT componentLevelVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.8 | INTEGER | read-only | System component level VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| INT componentLevelVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1 | INTEGER | read-only | System component level VPD index. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelVpdMachineType | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.7 | OCTET STRING | read-only | System component level VPD machine type. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.4 | OCTET STRING | read-only | System component level VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT componentLevelVpdSerialNumber | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.3 | OCTET STRING | read-only | System component level VPD serial number. For consistent results, view as a table and not as individual entries. |
| INT componentLevelVpdTypeCode | 1.3.6.1.4.1.2.3.51.2.2.21.21.1.6 | INTEGER | read-only | System component level VPD Type Code. Describes what the blade or module is. For consistent results, view as a table and not as individual entries. |
| INT configurationBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT configurationBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT configurationBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.5 | OCTET STRING | read-write | The name of the blade as a null terminated string. |
| INT configurationBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| INT configurationIndex | 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.1 | INTEGER | read-only | Blade configuration table index. |
| configureSP | 1.3.6.1.4.1.2.3.51.2.4 | |||
| cpuXTemp | 1.3.6.1.4.1.2.3.51.2.2.1.2 | |||
| INT critHardDrive | 1.3.6.1.4.1.2.3.51.2.4.2.1.6 | INTEGER | read-write | Generate an alert if any of hard disk drives fail. |
| INT criticalityAssertionMode | 1.3.6.1.4.1.2.3.51.2.2.8.3.6 | INTEGER | read-write | Indicates whether the Telco Criticality Assertion Mode is enable or disable. NOTE: This MIB is for Blade Center Telco only. |
| INT criticalLED | 1.3.6.1.4.1.2.3.51.2.2.8.3.1 | INTEGER | read-only | Indicates whether the Telco Panel CRT (Critical) LED is on or off. NOTE: This MIB is for Blade Center Telco only. |
| INT critInvalidConfig | 1.3.6.1.4.1.2.3.51.2.4.2.1.9 | INTEGER | read-write | Generate an alert if the hardware configuration is incompatible. |
| INT critMultiBlower | 1.3.6.1.4.1.2.3.51.2.4.2.1.4 | INTEGER | read-write | Generate an alert if multiple blowers used for cooling the system fail. |
| INT critMultipleSwitchModule | 1.3.6.1.4.1.2.3.51.2.4.2.1.8 | INTEGER | read-write | Generate an alert if all switch modules fail or are removed. |
| INT critPower | 1.3.6.1.4.1.2.3.51.2.4.2.1.5 | INTEGER | read-write | Generate an alert if any of the system power supplies fail. |
| INT critTemp | 1.3.6.1.4.1.2.3.51.2.4.2.1.1 | INTEGER | read-write | Generate an alert if any of the monitored temperature sensors in the system exceed their critical threshold. Note: If a critical Temperature condition is detected, the server will automatically be shut down and powered off whether this object is enabled or not. |
| INT critVolt | 1.3.6.1.4.1.2.3.51.2.4.2.1.2 | INTEGER | read-write | Generate a alert if any of the monitored power supply sensors in the system fall outside their specified critical operational range. Note: If a critical voltage condition is detected, the server will automatically be shut down and powered off whether this object is enabled or not. |
| INT critVRM | 1.3.6.1.4.1.2.3.51.2.4.2.1.7 | INTEGER | read-write | Generate an alert if any of VRM (voltage regulator modules) fail. |
| IP dhcpDHCPServer | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.6 | IpAddress | read-only | Contains the DHCP server IP address used to acquire the DHCP settings. |
| OCT dhcpDomainName | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.5 | OCTET STRING | read-only | Contains the 64 byte null terminated Domain Name for this interface, assigned by the DHCP server. |
| dhcpEthernetInterface | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16 | |||
| IP dhcpGatewayIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.3 | IpAddress | read-only | Contains the IP address of the gateway/router for the ethernet interface, assigned by the DHCP server. |
| OCT dhcpHostName | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.1 | OCTET STRING | read-only | Contains the 64 byte null terminated DNS host name for this interface, assigned by the DHCP server. |
| IP dhcpIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.2 | IpAddress | read-only | Contains the IP address for the ethernet interface, assigned by the DHCP server. |
| IP dhcpPrimaryDNSServer | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.7 | IpAddress | read-only | Contains the Primary DNS server, assigned by the DHCP server. |
| IP dhcpSecondaryDNSServer | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.8 | IpAddress | read-only | Contains the Secondary DNS server, assigned by the DHCP server. |
| IP dhcpSubnetMask | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.4 | IpAddress | read-only | Contains the Subnet Mask for the ethernet interface, assigned by the DHCP server. |
| IP dhcpTertiaryDNSServer | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.9 | IpAddress | read-only | Contains the tertiary DNS server, assigned by the DHCP server. |
| dnsConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.2 | |||
| INT dnsEnabled | 1.3.6.1.4.1.2.3.51.2.4.9.3.2.1 | INTEGER | read-write | Disable or enable the DNS agent. Note: To alter any of the configuration settings for the DNS agent, the following procedure should be used: (1) This object should be set to 'disabled' (2) Make the modifications to other settings (3) This object should be set to 'enabled' (4) Restart the remote supervisor adapter Also note that when attempting to enable this agent, it is verified that there is at least one valid DNS server IP address. If this verification fails, an error response will be returned and the DNS agent will be left disabled. |
| IP dnsServerIPAddress1 | 1.3.6.1.4.1.2.3.51.2.4.9.3.2.2 | IpAddress | read-write | Contains the primary DNS server IP address. |
| IP dnsServerIPAddress2 | 1.3.6.1.4.1.2.3.51.2.4.9.3.2.3 | IpAddress | read-write | Contains the secondary DNS server IP address. |
| IP dnsServerIPAddress3 | 1.3.6.1.4.1.2.3.51.2.4.9.3.2.4 | IpAddress | read-write | Contains the tertiary DNS server IP address. |
| errorLogs | 1.3.6.1.4.1.2.3.51.2.3 | |||
| eventLog | 1.3.6.1.4.1.2.3.51.2.3.4 | |||
| extEthernetInterface | 1.3.6.1.4.1.2.3.51.2.4.9.1.1 | |||
| OCT extEthernetInterfaceBIA | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.10 | OCTET STRING | read-only | Specifies the burned-in MAC (BIA) address. |
| INT extEthernetInterfaceDataRate | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.5 | INTEGER | read-write | Specifies the data transfer rate to be used over the ethernet interface: 10Mb, 100Mb, or Auto. |
| INT extEthernetInterfaceDhcpEnabled | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.8 | INTEGER | read-write | Disable or enable DHCP on this interface. |
| INT extEthernetInterfaceDuplexSetting | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.6 | INTEGER | read-write | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. |
| IP extEthernetInterfaceGatewayIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.9 | IpAddress | read-write | Contains the IP address of the gateway/router for the ethernet interface. |
| OCT extEthernetInterfaceHostName | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.3 | OCTET STRING | read-write | Contains the 64 byte null terminated DNS host name for this interface. |
| IP extEthernetInterfaceIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.4 | IpAddress | read-write | Contains the IP address for the ethernet interface. |
| OCT extEthernetInterfaceLAA | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.7 | OCTET STRING | read-write | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and A - F. This ASM subsystem does not allow use of a multicast address. A multicast address has the least significant bit of the first byte set to a 1. The first byte must, therefore, be an even number. |
| INT extEthernetInterfaceMTU | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.13 | INTEGER | read-write | Contains the Maximum Transmission Unit(MTU) for the ethernet interface |
| IP extEthernetInterfaceSubnetMask | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.14 | IpAddress | read-write | Contains the subnet mask for the ethernet interface |
| OCT extEthernetInterfaceType | 1.3.6.1.4.1.2.3.51.2.4.9.1.1.1 | OCTET STRING | read-only | The type of interface. Indicates 'Ethernet-1'. |
| firmwareUpdate | 1.3.6.1.4.1.2.3.51.2.22.9 | |||
| OCT firmwareUpdateFileName | 1.3.6.1.4.1.2.3.51.2.22.9.3 | OCTET STRING | read-write | File name of the firmware file. |
| INT firmwareUpdateStart | 1.3.6.1.4.1.2.3.51.2.22.9.4 | INTEGER | read-write | Start updating the firmware of the specified target module. Note 1: Depending on the target, it might take up to several minutes for the flash update to complete. Do not reset the target until the control has been returned. At this point, the results will be displayed. Note 2 : Use firmwareUpdateStatus to confirm the status of the last firmware update initiated by SNMP method. The Management Module must be restarted for the new firmware to take affect. NOTE: Value returned for the GET command is meaningless for this MIB. |
| OCT firmwareUpdateStatus | 1.3.6.1.4.1.2.3.51.2.22.9.5 | OCTET STRING | read-only | Get the status of the last firmware update which was initiated through SNMP method. |
| INT firmwareUpdateTarget | 1.3.6.1.4.1.2.3.51.2.22.9.1 | INTEGER | read-write | Target module whose firmware will be updated. Note: Some switch modules do not allow firmware update. When firmware update is attempted on those switch modules, the agent will report an error. |
| OCT firmwareUpdateTftpServer | 1.3.6.1.4.1.2.3.51.2.22.9.2 | OCTET STRING | read-write | IP address of the TFTP server where the firmware file resides. The address must be entered in a dotted decimal IP string (eg. 9.37.44.2). |
| frontPanelLEDs | 1.3.6.1.4.1.2.3.51.2.2.8.1 | |||
| OCT frontPanelTemp | 1.3.6.1.4.1.2.3.51.2.2.1.5.1 | OCTET STRING | read-only | The front panel temperature in degrees centigrade(C). This is surrounding temperature where the system is installed. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| fuelGauge | 1.3.6.1.4.1.2.3.51.2.2.10 | |||
| fuelGaugeEntry | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1 | not-accessible | Fuel Gauge entry | |
| OCT fuelGaugeFirstPowerModule | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.4 | OCTET STRING | read-only | Fuel Gauge Table First Power Module capacity in Watts in the power domain. Note: First power module in power domain 1 and 2 is in bay 1 and 3 respectively. |
| INT fuelGaugeIndex | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.1 | INTEGER | read-only | Fuel Gauge Table Index. |
| fuelGaugeInformation | 1.3.6.1.4.1.2.3.51.2.2.10.1 | |||
| INT fuelGaugePowerDomainNumber | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.2 | INTEGER | read-only | Fuel Gauge Table Power Domain Number. |
| OCT fuelGaugePowerInUsed | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.10 | OCTET STRING | read-only | This field displays the total power being used in each power domain. |
| INT fuelGaugePowerManagementPolicySetting | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.6 | INTEGER | read-only | Fuel Gauge Table for the Power Management Policy Setting for each power domain. |
| OCT fuelGaugeRemainingPower | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.9 | OCTET STRING | read-only | This field displays the remaining power available in each domain. Remaining Power = Total Power minus Power In Use |
| OCT fuelGaugeReservedPower | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.8 | OCTET STRING | read-only | This field displays the power that has been reserved in each power domain. Note: 1) Power is always reserved in domain 1 for two management modules and two I/O modules. 2) Power is reserved for I/O modules installed in bay 3 and 4 (Powered on or standby). 3) Power is reserved for each installed Blade. Blades in a standby state (not powered on) will reserve a certain amount power. |
| OCT fuelGaugeSecondPowerModule | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.5 | OCTET STRING | read-only | Fuel Gauge Table Second Power Module capacity in Watts in the power domain. Note: Second power module in power domain 1 and 2 is in bay 2 and 4 respectively. |
| OCT fuelGaugeStatus | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.3 | OCTET STRING | read-only | Fuel Gauge Table Status for the power domain. The response will start out with a numeric value (0 = unknown, 1 = good, 2 = waring, and 3: bad), followed by a text message. |
| fuelGaugeTable | 1.3.6.1.4.1.2.3.51.2.2.10.1.1 | not-accessible | Table of Fuel Gauge information. | |
| OCT fuelGaugeTotalPower | 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.7 | OCTET STRING | read-only | This field displays the total available power for each power domain based on installed power modules and the current Power Management Policy Setting. |
| generalRemoteCfg | 1.3.6.1.4.1.2.3.51.2.4.1.1 | |||
| INT generateTestAlert | 1.3.6.1.4.1.2.3.51.2.4.1.3.30 | INTEGER | read-write | Generate a Test Alert. This will send a test alert to all configured and enabled remote alert receipients. The text portion of the alert will contain 'Application Posted Alert to ASM'. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT httpPortAssignment | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.2 | INTEGER | read-write | HTTP port number. Default value is 80. Once changed, the url's have to include :port at the end. SP has to be reset for change to take effect. |
| INT httpsPortAssignment | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.3 | INTEGER | read-write | SSL port number. Default value is 443. Once changed, the url's have to include :port at the end. SP has to be reset for change to take effect. |
| ibm | 1.3.6.1.4.1.2 | |||
| ibmAgents | 1.3.6.1.4.1.2.3 | |||
| INT identityLED | 1.3.6.1.4.1.2.3.51.2.2.8.1.4 | INTEGER | read-write | Indicates whether the front panel identity LED is on or off. NOTE: This MIB is for Blade Center Enterprise only. |
| INT informationLED | 1.3.6.1.4.1.2.3.51.2.2.8.1.2 | INTEGER | read-write | Indicates whether the front panel system information LED is on or off. For Write access, the LED can be powered off only NOTE: This MIB is for Blade Center Enterprise only. |
| intEthernetInterface | 1.3.6.1.4.1.2.3.51.2.4.9.1.2 | |||
| OCT intEthernetInterfaceBIA | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.10 | OCTET STRING | read-only | Specifies the burned-in MAC (BIA) address. |
| INT intEthernetInterfaceDataRate | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.5 | INTEGER | read-only | Specifies the data transfer rate to be used over the ethernet interface: 10Mb, 100Mb, or Auto. |
| INT intEthernetInterfaceDuplexSetting | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.6 | INTEGER | read-only | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. |
| INT intEthernetInterfaceEnabled | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2 | INTEGER | read-write | Disable or enable the internal ethernet interface. Note: To alter any of the configuration settings for the ethernet interface, the following procedure should be used: (1) This object should be set to 'interfaceDisabled' (2) Make the modifications to other settings (3) This object should be set to 'interfaceEnabled' (4) Restart the remote supervisor adapter Also note that when attempting to enable this interface, the remote IP address is verified to be nonzero. If this verification fails, an error response will be returned and the internal ethernet interface will be left disabled. |
| IP intEthernetInterfaceGatewayIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.9 | IpAddress | read-write | Contains the IP address of the gateway/router for the ethernet interface. |
| OCT intEthernetInterfaceLAA | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.7 | OCTET STRING | read-write | Specifies the locally administered MAC address. |
| IP intEthernetInterfaceLocalIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.4 | IpAddress | read-write | Contains the IP address for the ASM side of the internal ethernet link. |
| INT intEthernetInterfaceMTU | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.13 | INTEGER | read-only | Contains the Maximum Transmission Unit(MTU) for the ethernet interface |
| IP intEthernetInterfaceSubnetMask | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.14 | IpAddress | read-write | Contains the subnet mask for the ethernet interface. |
| OCT intEthernetInterfaceType | 1.3.6.1.4.1.2.3.51.2.4.9.1.2.1 | OCTET STRING | read-only | The type of interface. Indicates 'PPP-1'. |
| inventoryManagementActivityVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.22.1 | not-accessible | System component hardware VPD activity log entry. For consistent results, view as a table and not as individual entries. | |
| inventoryManagementActivityVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.22 | not-accessible | Table of system component hardware VPD activity log. For consistent results, view as a table and not as individual entries. | |
| inventoryManagementVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.21.1 | not-accessible | System component hardware VPD entry. For consistent results, view as a table and not as individual entries. | |
| inventoryManagementVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.21 | not-accessible | Table of the hardware components, (modules or blades) for which the system provides VPD information. For consistent results, view as a table and not as individual entries. | |
| INT ipmiEnabled | 1.3.6.1.4.1.2.3.51.2.22.20.1 | INTEGER | read-write | Disable/enable IPMI feature and read the status through SNMP method. |
| ipmiManagement | 1.3.6.1.4.1.2.3.51.2.22.20 | |||
| INT ldapBindingMethod | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.10 | INTEGER | read-write | On initial binds to the LDAP server during user authentication, there are three options: Anonymous authentication: Bind attempt is made without a client DN or password. If the bind is successful, a search will be requested in order to find an entry on the LDAP server for the user attempting to login. If an entry is found, a second attempt to bind will be attempted, this time with the user's DN and password. If this succeeds, the user is deemed to have passed the user authentication phase. Group authentication is then attempted if it is enabled. Client authentication: Bind attempt is made with client DN and password specified by this configuration parameter. If the bind is successful, we proceed as above. User Principal Name (UPN): Bind attempt is made directly with the credentials used during the login process. If this succeeds, the user is deemed to have passed the user authentication phase. Note that for Active Directory servers, the userid can have the form someuser@somedomain or simply someuser. Strict UPN: This is the same as UPN above, except that the userid must have the form someuser@somedomain. The string entered by the user will be parsed for the @ symbol. |
| OCT ldapClientAuthenticationDN | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.11 | OCTET STRING | read-write | The initial bind to the LDAP server during user authentication can be performed with anonymous authentication, client based authentication, or UPN. The client based option requires a client DN and password as parameters to the bind request. These parameters are configured here. Note that the password can be left blank. |
| OCT ldapClientAuthenticationPassword | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.12 | OCTET STRING | read-write | The client authentication password |
| ldapClientCfg | 1.3.6.1.4.1.2.3.51.2.4.9.3.6 | |||
| INT ldapDomainSource | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.17 | INTEGER | read-write | The DNS SRV request sent to the DNS server must specify a domain name. The LDAP client will determine where to get this domain name based on one of the following three options: - extractSearchDomainFromLoginID: With this option, the LDAP client will use the domain name in the login id. For example, if the login id is joesmith@mycompany.com, the domain name equals mycompany.com. If the domain name cannot be extracted, the DNS SRV will fail, causing the user authentication to fail automatically. - useOnlyConfiguredSearchDomainBelow: With this option, the LDAP client will use the domain name configured in the Search Domain parameter. - tryLoginFirstThenConfiguredValue: With this option, the LDAP client will first attempt to extract the domain name from the login id. If this succeeds, this domain name will be used in the DNS SRV request. If there is no domain name present in the login id, the LDAP client will instead use the configured Search Domain parameter as the domain name in the DNS SRV request. If nothing is configured, user authentication will fail immediately. |
| OCT ldapGroupFilter | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9 | OCTET STRING | read-write | This filter is used for group authentication. It specifies what group or groups that this MM belongs to. If left blank, group authentication is disabled. Otherwise, group authentication will be performed against the filter. The filter can be a specific group name (eg. RSAWest), a wildcard (*) which matches everything, or a wildcard with a prefix (eg. RSA*). The default filter is RSA*. After user authentication, group authentication will take place, whereby an attempt will be made to match the group or groups (that the user belongs to) to the group filter defined here. If there is no match, the user will not pass authentication and will be blocked. If there is a match, the login permissions for the user will be retrieved from the matched group(s), unless the user already has login permissions assigned directly from the user record retrieved from the LDAP server. |
| OCT ldapGroupSearchAttribute | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.14 | OCTET STRING | read-write | When the MM Group Filter name is configured, it is necessary to retrieve from the LDAP server the list of groups that a particular user belongs to. This is required to do group authentication. In order to retrieve this list, the search filter sent to the server must specify the attribute name associated with groups. This field specifies this attribute name. If this field is left blank, the attribute name in the filter will default to memberOf. |
| OCT ldapLoginPermissionAttribute | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.15 | OCTET STRING | read-write | When a user successfully authenticates via a LDAP server, it is necessary to retrieve the login permissions for this user. In order to retrieve these permissions, the search filter sent to the server must specify the attribute name associated with login permissions. This field specifies this attribute name. |
| OCT ldapRootDN | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.7 | OCTET STRING | read-write | Distinguished Name for root entry of directory tree. An example might look like dn=foobar,dn=com. |
| OCT ldapSearchDomain | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.18 | OCTET STRING | read-write | This parameter may be used as the domain name in the DNS SRV request, depending on how the Domain Source parameter is configured. |
| OCT ldapServer1NameOrIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.1 | OCTET STRING | read-write | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| INT ldapServer1PortNumber | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.2 | INTEGER | read-write | LDAP server port number. |
| OCT ldapServer2NameOrIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.3 | OCTET STRING | read-write | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| INT ldapServer2PortNumber | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.4 | INTEGER | read-write | LDAP server port number. |
| OCT ldapServer3NameOrIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.5 | OCTET STRING | read-write | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| INT ldapServer3PortNumber | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.6 | INTEGER | read-write | LDAP server port number. |
| OCT ldapServiceName | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.19 | OCTET STRING | read-write | The DNS SRV request sent to the DNS server must also specify a service name. The configured value will be used for this purpose. If left blank, the default value used is 'ldap'. Note that the DNS SRV request must also specify a protocol name. This defaults to 'tcp' and is not configurable. |
| OCT ldapUIDsearchAttribute | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.13 | OCTET STRING | read-write | When the binding method selected is Anonymous authentication or Client authentication, the initial bind to the LDAP server is followed by a search request aimed at retrieving specific information about the user, including the user's DN, login permissions, and group ownerships. In order to retrieve this information, the search request must specify the attribute name used to represent userids on that server. Specifically, this name is used as a search filter against the login id entered by the user. This attribute name is configured here. If this field is left blank, a default of uid is used during user authentication. For example, on Active Directory servers, the attribute name used for userids is often sAMAccoutName. When the binding method selected is UPN or Strict UPN, this field defaults automatically to userPrincipalName during user authentication if the userid entered has the form userid@somedomain. |
| INT ldapUseDNSOrPreConfiguredServers | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.16 | INTEGER | read-write | The MM contains a Version 2.0 LDAP Client that may be configured to provide user authentication through one or more LDAP servers. The LDAP server(s) to be used for authentication can be discovered dynamically or manually pre-configured. If the usePreConfiguredLDAPServers option is selected, up to 3 LDAP servers can be configured. Simply enter the server's IP address or hostname (assuming DNS is enabled). The port number for each server is optional. If left blank, the default value of 389 is used for non-secured LDAP connections. For secured connections, the default is 636. At least one server must be configured. If the useDNSToFindLDAPServers is selected, the mechanisms described by RFC2782 (A DNS RR for specifying the location of services) are applied to find the server(s). This is known as DNS SRV. |
| OCT ldapUserSearchBaseDN | 1.3.6.1.4.1.2.3.51.2.4.9.3.6.8 | OCTET STRING | read-write | As part of the user authentication process, it is necessary to search the LDAP server for one or more attributes associated with a particular user. Any search request must specify the base DN for the actual search. This field specifies the base DN which should be used to search the User directory. An example might look like cn=users,dn=foobar,dn=com. If this field is left blank, the Root DN will be used as the search base instead. As mentioned, user searches are part of the authentication process. They are carried out to retrieve information about the user such as login permissions, callback number, and group memberships. For Version 2.0 LDAP clients, it is strongly encouraged that this parameter be configured, otherwise a search using the root DN may not succeed (as seen on Active Directory servers). |
| INT ledBladeExists | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT ledBladeHealthState | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.5 | INTEGER | read-only | The system health state for the blade server. 1 = good, 2 = warning, 3 = bad. |
| INT ledBladeId | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| INT ledBladeIdentity | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.11 | INTEGER | read-write | Indicates whether the blade identify LED is on, off, or blinking. |
| INT ledBladeIndex | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.1 | INTEGER | read-only | Blade LED table index. |
| INT ledBladeInformation | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.8 | INTEGER | read-write | Indicates whether the blade information LED is on or off. For Write access, the LED can be powered off only. |
| INT ledBladeKVM | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.9 | INTEGER | read-only | Indicates whether the blade KVM LED is on, off, or blinking. |
| INT ledBladeMediaTray | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.10 | INTEGER | read-only | Indicates whether the blade media tray LED is on, off, or blinking. |
| OCT ledBladeName | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.6 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT ledBladePowerState | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| INT ledBladeSystemError | 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.7 | INTEGER | read-only | Indicates whether the blade system error LED is on or off. |
| leds | 1.3.6.1.4.1.2.3.51.2.2.8 | |||
| INT ledSMIndex | 1.3.6.1.4.1.2.3.51.2.2.8.4.1.1.1 | INTEGER | read-only | Switch module LEDs table index. |
| OCT ledSMLEDs | 1.3.6.1.4.1.2.3.51.2.2.8.4.1.1.2 | OCTET STRING | read-only | A bitmap of LEDs information on the selected switch module. The bitmap is a string containing a list of 1's and 0's. The first 16 nibles represent the status of the external LEDs while the last 16 nibles represent the status of the internal port connections from the switch module to blades. Each nible of data is presented in the bitmap format (0b0000) and is encoded as followed - 0b0000: LED is not present - 0b0001: LED is off - 0b0010: LED is on Note: The data is read from left to right, starting out with switch module 1 and so on. |
| INT majorLED | 1.3.6.1.4.1.2.3.51.2.2.8.3.2 | INTEGER | read-only | Indicates whether the Telco Panel MJR (Major) LED is on or off. NOTE: This MIB is for Blade Center Telco only. |
| managementModule | 1.3.6.1.4.1.2.3.51.2.22.5 | |||
| INT minorLED | 1.3.6.1.4.1.2.3.51.2.2.8.3.3 | INTEGER | read-only | Indicates whether the Telco Panel MNR (Minor) LED is on or off. NOTE: This MIB is for Blade Center Telco only. |
| OCT minus5Volt | 1.3.6.1.4.1.2.3.51.2.2.2.1.5 | OCTET STRING | read-only | -5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| mmBistAndChassisStatus | 1.3.6.1.4.1.2.3.51.2.2.5.2 | |||
| OCT mmBootROMVpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.6 | OCTET STRING | read-only | Firmware VPD build date. |
| OCT mmBootROMVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.3 | OCTET STRING | read-only | Firmware VPD build identification. |
| mmBootROMVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1 | not-accessible | SP Firmware VPD entry. | |
| OCT mmBootROMVpdFilename | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.5 | OCTET STRING | read-only | Firmware VPD file name. |
| INT mmBootROMVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.1 | INTEGER | read-only | Firmware VPD index. |
| OCT mmBootROMVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.2 | OCTET STRING | read-only | Firmware VPD name description. |
| OCT mmBootROMVpdRevisonNumber | 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.4 | OCTET STRING | read-only | Firmware VPD revision number. |
| mmBootROMVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.3.2 | not-accessible | Table of SP Firmware VPD. | |
| IP mmExtIpAddress | 1.3.6.1.4.1.2.3.51.2.22.5.1.1.3 | IpAddress | read-only | Management module external IP address. |
| mmFirmwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.3 | |||
| mmHardwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.2 | |||
| OCT mmHardwareVpdBayNumber | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.2 | OCTET STRING | read-only | Management module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| mmHardwareVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1 | not-accessible | Management module hardware VPD entry. For consistent results, view as a table and not as individual entries. | |
| OCT mmHardwareVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.4 | OCTET STRING | read-only | Management module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| OCT mmHardwareVpdFruSerial | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.9 | OCTET STRING | read-only | Management module hardware VPD FRU serial. For consistent results, view as a table and not as individual entries. |
| INT mmHardwareVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.5 | INTEGER | read-only | Management module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| INT mmHardwareVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.1 | INTEGER | read-only | Management module hardware VPD index. For consistent results, view as a table and not as individual entries. |
| OCT mmHardwareVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.3 | OCTET STRING | read-only | Management module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT mmHardwareVpdManufDate | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.7 | OCTET STRING | read-only | Management module hardware VPD manufacture date. For consistent results, view as a table and not as individual entries. |
| OCT mmHardwareVpdPartNumber | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.8 | OCTET STRING | read-only | Management module hardware VPD Part number. For consistent results, view as a table and not as individual entries. |
| mmHardwareVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.2.1 | not-accessible | Table of the management module hardware components. For consistent results, view as a table and not as individual entries. | |
| OCT mmHardwareVpdUuid | 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.6 | OCTET STRING | read-only | Management module hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| OCT mmMainApplVpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.6 | OCTET STRING | read-only | Firmware VPD build date. |
| OCT mmMainApplVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.3 | OCTET STRING | read-only | Firmware VPD build identification. |
| mmMainApplVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1 | not-accessible | SP Firmware VPD entry. | |
| OCT mmMainApplVpdFilename | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.5 | OCTET STRING | read-only | Firmware VPD file name. |
| INT mmMainApplVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.1 | INTEGER | read-only | Firmware VPD index. |
| OCT mmMainApplVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.2 | OCTET STRING | read-only | Firmware VPD name description. |
| OCT mmMainApplVpdRevisonNumber | 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.4 | OCTET STRING | read-only | Firmware VPD revision number. |
| mmMainApplVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.3.1 | not-accessible | Table of SP Firmware VPD. | |
| INT mmPresent | 1.3.6.1.4.1.2.3.51.2.22.5.1.1.2 | INTEGER | read-only | Management module current status. |
| INT mmPrimary | 1.3.6.1.4.1.2.3.51.2.22.5.1.1.4 | INTEGER | read-only | Indicate if this Management module is a primary or not. |
| OCT mmPS2toUSBConvVpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.6 | OCTET STRING | read-only | Firmware VPD build date. |
| OCT mmPS2toUSBConvVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.3 | OCTET STRING | read-only | Firmware VPD build identification. |
| mmPS2toUSBConvVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1 | not-accessible | SP Firmware VPD entry. | |
| OCT mmPS2toUSBConvVpdFilename | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.5 | OCTET STRING | read-only | Firmware VPD file name. |
| INT mmPS2toUSBConvVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.1 | INTEGER | read-only | Firmware VPD index. |
| OCT mmPS2toUSBConvVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.2 | OCTET STRING | read-only | Firmware VPD name description. |
| OCT mmPS2toUSBConvVpdRevisonNumber | 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.4 | OCTET STRING | read-only | Firmware VPD revision number. |
| mmPS2toUSBConvVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.3.4 | not-accessible | Table of SP Firmware VPD. | |
| OCT mmRemoteControlVpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.6 | OCTET STRING | read-only | Firmware VPD build date. |
| OCT mmRemoteControlVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.3 | OCTET STRING | read-only | Firmware VPD build identification. |
| mmRemoteControlVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1 | not-accessible | SP Firmware VPD entry. | |
| OCT mmRemoteControlVpdFilename | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.5 | OCTET STRING | read-only | Firmware VPD file name. |
| INT mmRemoteControlVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.1 | INTEGER | read-only | Firmware VPD index. |
| OCT mmRemoteControlVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.2 | OCTET STRING | read-only | Firmware VPD name description. |
| OCT mmRemoteControlVpdRevisonNumber | 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.4 | OCTET STRING | read-only | Firmware VPD revision number. |
| mmRemoteControlVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.3.3 | not-accessible | Table of SP Firmware VPD. | |
| mmStatusEntry | 1.3.6.1.4.1.2.3.51.2.22.5.1.1 | not-accessible | Management module status entry. For consistent results, view as a table and not as individual entries. | |
| INT mmStatusIndex | 1.3.6.1.4.1.2.3.51.2.22.5.1.1.1 | INTEGER | read-only | Management module status index. |
| mmStatusTable | 1.3.6.1.4.1.2.3.51.2.22.5.1 | not-accessible | Table of the management module status. For consistent results, view as a table and not as individual entries. | |
| OCT mmTemp | 1.3.6.1.4.1.2.3.51.2.2.1.1.2 | OCTET STRING | read-only | Management module temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT mmToUSBIntfVpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.6 | OCTET STRING | read-only | Firmware VPD build date. |
| OCT mmToUSBIntfVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.3 | OCTET STRING | read-only | Firmware VPD build identification. |
| mmToUSBIntfVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1 | not-accessible | SP Firmware VPD entry. | |
| OCT mmToUSBIntfVpdFilename | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.5 | OCTET STRING | read-only | Firmware VPD file name. |
| INT mmToUSBIntfVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.1 | INTEGER | read-only | Firmware VPD index. |
| OCT mmToUSBIntfVpdName | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.2 | OCTET STRING | read-only | Firmware VPD name description. |
| OCT mmToUSBIntfVpdRevisonNumber | 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.4 | OCTET STRING | read-only | Firmware VPD revision number. |
| mmToUSBIntfVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.3.5 | not-accessible | Table of SP Firmware VPD. | |
| INT monitorLogStateEvents | 1.3.6.1.4.1.2.3.51.2.3.4.4 | INTEGER | read-write | If disabled, it means the info LED will not turn on when the log gets full and no alerts will be sent out. If enabled, the LED will turn on when the log gets full and alerts will be sent out. |
| monitors | 1.3.6.1.4.1.2.3.51.2.2 | |||
| monitorThresholds | 1.3.6.1.4.1.2.3.51.2.2.20 | |||
| mtHardwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.9 | |||
| OCT mtHardwareVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.9.4 | OCTET STRING | read-only | Media tray hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| INT mtHardwareVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.9.5 | INTEGER | read-only | Media tray hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| OCT mtHardwareVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.9.3 | OCTET STRING | read-only | Media tray hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT mtHardwareVpdUuid | 1.3.6.1.4.1.2.3.51.2.2.21.9.8 | OCTET STRING | read-only | Media tray hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| netfinitySupportProcessorAgent | 1.3.6.1.4.1.2.3.51 | |||
| INT networkChangeNotification | 1.3.6.1.4.1.2.3.51.2.4.2.3.12 | INTEGER | read-write | Generate an alert if the SP has restarted and the internal network has initialized successfully, or if an IP address change via a source other than the management module. |
| networkConfiguration | 1.3.6.1.4.1.2.3.51.2.4.9 | |||
| networkInterfaces | 1.3.6.1.4.1.2.3.51.2.4.9.1 | |||
| OCT pd1BayNumber | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.2 | OCTET STRING | read-only | Power Domain 1 Table Bay Number. The following Bay Number IDs are used in the BladeCenter Enterprise : notApplicable(1), notApplicable(2), blowerBay1(3), blowerBay2(4), managementModuleBay1(5), managementModuleBay2(6), switchModuelBay1(7), switchModuleBay2(8), switchModuleBay3(9), switchModuleBay4(10), serverBladeBay1(11), serverBladeBay2(12), serverBladeBay3(13), serverBladeBay4(14), serverBladeBay5(15), serverBladeBay6(16), notApplicable(17) The following Bay Number IDs are used in the BladeCenter T: notApplicable(1), notApplicable(2), blowerBay1(3), blowerBay2(4), blowerBay3(5) (if Power Domain 2 is not available), blowerBay4(6) (if Power Domain 2 is not available), managementModuleBay1(7), managementModuleBay2(8), switchModuelBay1(9), switchModuleBay2(10), switchModuleBay3(11), switchModuleBay4(12), serverBladeBay1(13), serverBladeBay2(14), serverBladeBay3(15), serverBladeBay4(16), notApplicable(17) |
| INT pd1BladePrimarySlot | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.3 | INTEGER | read-only | Power Domain 1 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is installed in slot 3 and 4. 3 is primary slot while 4 is not. |
| INT pd1Index | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.1 | INTEGER | read-only | Power Domain 1 Table Index. |
| OCT pd1ModuleAllocatedPowerCurrent | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7 | OCTET STRING | read-only | Power Domain 1 Table Allocated Power Current indicates the current power allocation for the module in Watts. Note: When a server blade spans multiple slots (e.g. double wide or triple wide), the current power allocation for the module is equally divided among the slots. |
| OCT pd1ModuleAllocatedPowerMax | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.8 | OCTET STRING | read-only | Power Domain 1 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amout of power the module will consume in the domain when it is fully popolated with memory chips, daughter cards, etc. Note: When a server blade spans multiple slots (e.g. double wide or triple wide), the maximum power allocation for the module is equally divided among the slots. |
| OCT pd1ModuleAllocatedPowerMin | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.9 | OCTET STRING | read-only | Power Domain 1 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of the component in the domain based on its maximum throttle limit. Note: When a server blade spans multiple slots (e.g. double wide or triple wide), the minimum power allocation for the module is equally divided among the slots. |
| OCT pd1ModuleCPUDutyCycles | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.10 | OCTET STRING | read-only | Power Domain 1 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that some blades do not report the CPU duty cycles. In this case, 'notApplicable' will be displayed. Note: The CPU duty cycles are reported only on a primary slot when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is installed in slot 3 and 4. 3 is primary slot while 4 is not. The CPU duty cycles are reported on slot 3 while 'notApplicable' is displayed for slot 4. |
| OCT pd1ModuleName | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.5 | OCTET STRING | read-only | Power Domain 1 Table Module Name. |
| INT pd1ModuleState | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.6 | INTEGER | read-only | Power Domain 1 Table Module State. |
| INT pd1ModuleStatus | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.4 | INTEGER | read-only | Power Domain 1 Table Module Throttle Status. |
| INT pd1ModuleThrottle | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.11 | INTEGER | read-only | Power Domain 1 Table Module Throttle indicates whether the server blade may be allowed to throttle or not. |
| OCT pd2BayNumber | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.2 | OCTET STRING | read-only | Power Domain 2 Table Bay Number. The following Bay Number IDs are used in the BladeCenter Enterprise : serverBladeBay7(1), serverBladeBay8(2), serverBladeBay9(3), serverBladeBay10(4), serverBladeBay11(5), serverBladeBay12(6), serverBladeBay13(7), serverBladeBay14(8), notApplicable(9) The following Bay Number IDs are used in the BladeCenter T: blowerBay3(1), blowerBay4(2), serverBladeBay5(3), serverBladeBay6(4), serverBladeBay7(5), serverBladeBay8(6), notApplicable(7), notApplicable(8), notApplicable(9) |
| INT pd2BladePrimarySlot | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.3 | INTEGER | read-only | Power Domain 2 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is installed in slot 3 and 4. 3 is primary slot while 4 is not. |
| INT pd2Index | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.1 | INTEGER | read-only | Power Domain 2 Table Index. |
| OCT pd2ModuleAllocatedPowerCurrent | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.7 | OCTET STRING | read-only | Power Domain 2 Table Allocated Power Current indicates the current power allocation for the module. Note: When a server blade spans multiple slots (e.g. double wide or triple wide), the current power allocation for the module is equally divided among the slots. |
| OCT pd2ModuleAllocatedPowerMax | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.8 | OCTET STRING | read-only | Power Domain 2 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amount of power the module will consume in the domain when it is fully popolated with memory chips, daughter cards, etc. Note: When a server blade spans multiple slots (e.g. double wide or triple wide), the maximum power allocation for the module is equally divided among the slots. |
| OCT pd2ModuleAllocatedPowerMin | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.9 | OCTET STRING | read-only | Power Domain 2 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of the component in the domain based on its maximum throttle limit. Note: When a server blade spans multiple slots (e.g. double wide or triple wide), the minimum power allocation for the module is equally divided among the slots. |
| OCT pd2ModuleCPUDutyCycles | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.10 | OCTET STRING | read-only | Power Domain 2 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that some blades do not report the CPU duty cycles. In this case, 'notApplicable' will be displayed. Note: The CPU duty cycles are reported only on a primary slot when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is installed in slot 3 and 4. 3 is primary slot while 4 is not. The CPU duty cycles are reported on slot 3 while 'notApplicable' is displayed for slot 4. |
| OCT pd2ModuleName | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.5 | OCTET STRING | read-only | Power Domain 2 Table Module Name. |
| INT pd2ModuleState | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.6 | INTEGER | read-only | Power Domain 2 Table Power State. |
| INT pd2ModuleStatus | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.4 | INTEGER | read-only | Power Domain 2 Table Module throttle status. |
| INT pd2ModuleThrottle | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.11 | INTEGER | read-only | Power Domain 2 Table Module Throttle indicates whether the server blade may be allowed to throttle or not. |
| planarTemp | 1.3.6.1.4.1.2.3.51.2.2.1.1 | |||
| planarVolt | 1.3.6.1.4.1.2.3.51.2.2.2.1 | |||
| OCT plus12Volt | 1.3.6.1.4.1.2.3.51.2.2.2.1.3 | OCTET STRING | read-only | +12 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT plus1Pt8Volt | 1.3.6.1.4.1.2.3.51.2.2.2.1.8 | OCTET STRING | read-only | +1.8 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT plus2Pt5Volt | 1.3.6.1.4.1.2.3.51.2.2.2.1.6 | OCTET STRING | read-only | +2.5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT plus3Pt3Volt | 1.3.6.1.4.1.2.3.51.2.2.2.1.2 | OCTET STRING | read-only | +3.3 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT plus5Volt | 1.3.6.1.4.1.2.3.51.2.2.2.1.1 | OCTET STRING | read-only | +5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| pmHardwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.8 | |||
| OCT pmHardwareVpdBayNumber | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.2 | OCTET STRING | read-only | Power module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| pmHardwareVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1 | not-accessible | Power module hardware VPD entry. For consistent results, view as a table and not as individual entries. | |
| OCT pmHardwareVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.4 | OCTET STRING | read-only | Power module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| OCT pmHardwareVpdFruSerial | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.11 | OCTET STRING | read-only | Power module hardware VPD FRU Serial. For consistent results, view as a table and not as individual entries. |
| INT pmHardwareVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.5 | INTEGER | read-only | Power module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| INT pmHardwareVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.1 | INTEGER | read-only | Power module hardware VPD index. For consistent results, view as a table and not as individual entries. |
| OCT pmHardwareVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.3 | OCTET STRING | read-only | Power module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT pmHardwareVpdManufDate | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.9 | OCTET STRING | read-only | Power module hardware VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| OCT pmHardwareVpdPartNumber | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.10 | OCTET STRING | read-only | Power module hardware VPD PartNumber. For consistent results, view as a table and not as individual entries. |
| pmHardwareVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.8.1 | not-accessible | Table of the power module hardware components. For consistent results, view as a table and not as individual entries. | |
| OCT pmHardwareVpdUuid | 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.8 | OCTET STRING | read-only | Power module hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| powerDomain1 | 1.3.6.1.4.1.2.3.51.2.2.10.2 | |||
| powerDomain1Entry | 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1 | not-accessible | Fuel Gauge entry | |
| INT powerdomain1Oversubscription | 1.3.6.1.4.1.2.3.51.2.22.1.7.2.1 | INTEGER | read-write | Power Management Policy settings for power domain 1. |
| powerDomain1Table | 1.3.6.1.4.1.2.3.51.2.2.10.2.1 | not-accessible | Table of Power Domain 1. | |
| powerDomain2 | 1.3.6.1.4.1.2.3.51.2.2.10.3 | |||
| powerDomain2Entry | 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1 | not-accessible | Fuel Gauge entry | |
| INT powerdomain2Oversubscription | 1.3.6.1.4.1.2.3.51.2.22.1.7.2.2 | INTEGER | read-write | Power Management Policy settings for power domain 2. |
| powerDomain2Table | 1.3.6.1.4.1.2.3.51.2.2.10.3.1 | not-accessible | Table of Power Domain 2. | |
| OCT powerModuleDetails | 1.3.6.1.4.1.2.3.51.2.2.4.1.1.4 | OCTET STRING | read-only | The details for this power module. |
| INT powerModuleExists | 1.3.6.1.4.1.2.3.51.2.2.4.1.1.2 | INTEGER | read-only | Indicates whether the power module specified exists or not. |
| powerModuleHealth | 1.3.6.1.4.1.2.3.51.2.2.4 | |||
| powerModuleHealthEntry | 1.3.6.1.4.1.2.3.51.2.2.4.1.1 | not-accessible | Power Module health entry | |
| powerModuleHealthTable | 1.3.6.1.4.1.2.3.51.2.2.4.1 | not-accessible | Table of power module health information. Contains the power health information for each power module. | |
| INT powerModuleIndex | 1.3.6.1.4.1.2.3.51.2.2.4.1.1.1 | INTEGER | read-only | Power module sequence index. |
| INT powerModuleState | 1.3.6.1.4.1.2.3.51.2.2.4.1.1.3 | INTEGER | read-only | The health state for the power module. 0 = unknown, 1 = good, 2 = warning, 3 = not available. |
| INT powerOnOffBlade | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.7 | INTEGER | read-write | Power on or off a specific blade. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT powerRestartBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT powerRestartBladeHealthState | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.5 | INTEGER | read-only | The system health state for the blade server. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| INT powerRestartBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT powerRestartBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.6 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT powerRestartBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| INT powerRestartIndex | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.1 | INTEGER | read-only | Blade power restart table index. |
| processorBlade | 1.3.6.1.4.1.2.3.51.2.22.1 | |||
| INT rbsBlade1 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.4 | INTEGER | read-write | User has access to the blade in slot 1. |
| INT rbsBlade10 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.13 | INTEGER | read-write | User has access to the blade in slot 10. |
| INT rbsBlade11 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.14 | INTEGER | read-write | User has access to the blade in slot 11. |
| INT rbsBlade12 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.15 | INTEGER | read-write | User has access to the blade in slot 12. |
| INT rbsBlade13 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.16 | INTEGER | read-write | User has access to the blade in slot 13. |
| INT rbsBlade14 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.17 | INTEGER | read-write | User has access to the blade in slot 14. |
| INT rbsBlade2 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.5 | INTEGER | read-write | User has access to the blade in slot 2. |
| INT rbsBlade3 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.6 | INTEGER | read-write | User has access to the blade in slot 3. |
| INT rbsBlade4 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.7 | INTEGER | read-write | User has access to the blade in slot 4. |
| INT rbsBlade5 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.8 | INTEGER | read-write | User has access to the blade in slot 5. |
| INT rbsBlade6 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.9 | INTEGER | read-write | User has access to the blade in slot 6. |
| INT rbsBlade7 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.10 | INTEGER | read-write | User has access to the blade in slot 7. |
| INT rbsBlade8 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.11 | INTEGER | read-write | User has access to the blade in slot 8. |
| INT rbsBlade9 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.12 | INTEGER | read-write | User has access to the blade in slot 9. |
| INT rbsBladeAdministration | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.13 | INTEGER | read-write | User can power on/off and restart blades, activate standby blade servers, do firmware updates. |
| INT rbsBladeConfiguration | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.12 | INTEGER | read-write | User can modify and save any blade configuration parameter. |
| INT rbsBladeOperator | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.10 | INTEGER | read-write | User has ability to browse status and properties of blades. |
| INT rbsBladeRemotePresence | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.11 | INTEGER | read-write | User has ability to access the Remote Control web panel and the functions provided on the panel: remote console (KVM) and remote disk. The ability to issue the CLI console command to start an SOL session to a blade will also require this authority. |
| INT rbsChassis | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.3 | INTEGER | read-write | User has access to the MM and chassis functions. |
| INT rbsChassisAccountManagement | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.6 | INTEGER | read-write | User can add/modify/delete users and change the global login settings. |
| INT rbsChassisAdministration | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.9 | INTEGER | read-write | User has ability to backup or restore MM configuration, do MM firmware updates, restore MM factory defaults configuration, or restart the MM.) |
| INT rbsChassisConfiguration | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.8 | INTEGER | read-write | User can modify and save any chassis configuration parameter (except user profiles and event log settings.) |
| INT rbsChassisLogManagement | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.7 | INTEGER | read-write | User has ability to clear the MM event log and to change log policy settings. |
| INT rbsChassisOperator | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.5 | INTEGER | read-write | User has ability to browse status and properties of chassis components (MM, blowers, midplane, power modules, media tray. |
| INT rbsOperator | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.4 | INTEGER | read-write | User has only operator access, and cannot perform any save, modify, clear, or state affecting operations (eg. restart ASM, restore defaults, upgrade the firmware, etc.). |
| INT rbsSupervisor | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.3 | INTEGER | read-write | User has no restrictions. |
| INT rbsSwitch1 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.18 | INTEGER | read-write | User has access to switch module 1. |
| INT rbsSwitch2 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.19 | INTEGER | read-write | User has access to switch module 2. |
| INT rbsSwitch3 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.20 | INTEGER | read-write | User has access to switch module 3. |
| INT rbsSwitch4 | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.21 | INTEGER | read-write | User has access to switch module 4. |
| INT rbsSwitchModuleAdministration | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.16 | INTEGER | read-write | User can power on/off and restart the switch modules, and update switch module firmware. |
| INT rbsSwitchModuleConfiguration | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.15 | INTEGER | read-write | User can modify the switch module configuration parameters on the Switch Management. |
| INT rbsSwitchModuleOperator | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.14 | INTEGER | read-write | User has ability to browse status and properties of I/O modules. |
| readEventLogEntry | 1.3.6.1.4.1.2.3.51.2.3.4.2.1 | not-accessible | Event log entry table entry | |
| INT readEventLogIndex | 1.3.6.1.4.1.2.3.51.2.3.4.2.1.1 | INTEGER | read-only | The event log index number. For consistent results, view as a table and not as individual entries. |
| OCT readEventLogString | 1.3.6.1.4.1.2.3.51.2.3.4.2.1.2 | OCTET STRING | read-only | A string of data detailing an event. For consistent results, view as a table and not as individual entries. |
| readEventLogTable | 1.3.6.1.4.1.2.3.51.2.3.4.2 | not-accessible | Table of event log entry information. | |
| remoteAccessConfig | 1.3.6.1.4.1.2.3.51.2.4.1 | |||
| OCT remoteAccessIdEntryEncodedLoginPw | 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.7 | OCTET STRING | read-write | Used only for configuration save/restore. A null terminated string containing an encoded concatenation of the login ID and password separated by an ':'. |
| INT remoteAccessIdEntryIndex | 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.1 | INTEGER | read-only | Index for Remote access entry. |
| OCT remoteAccessIdEntryPassword | 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.3 | OCTET STRING | read-write | Remote access password. The password must contain at least one alphabetic and one non-alphabetic character and be at least 5 characters long, or you can leave the password field blank to set an empty password. NOTE: Value returned by the GET command is meaningless for this MIB object. |
| OCT remoteAccessIdEntryUserId | 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.2 | OCTET STRING | read-write | Remote access entry null terminated string that contains the user-id. It must not be a duplicate of any previously configured ones. |
| remoteAccessIds | 1.3.6.1.4.1.2.3.51.2.4.1.4 | |||
| remoteAccessIdsEntry | 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1 | not-accessible | Remote access entries. | |
| remoteAccessIdsTable | 1.3.6.1.4.1.2.3.51.2.4.1.4.1 | not-accessible | Table of remote access profiles. This table lets you to configure all login profiles. You can define up to 12 unique profiles. Note: By default, the remote supervisor adapter comes configured with one login profile that allows remote access using a login ID of 'USERID' and a password of 'PASSW0RD' (the 0 is a zero). To avoid a potential security exposure, we strongly recommend that you change this default Login Profile to values of your choice. | |
| remoteAccessRBSroleEntry | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1 | not-accessible | User Role entries. | |
| remoteAccessRBSroleTable | 1.3.6.1.4.1.2.3.51.2.4.1.4.3 | not-accessible | Table of RBS User Role profiles. | |
| remoteAccessRBSscopeEntry | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1 | not-accessible | User Scope entries. | |
| remoteAccessRBSscopeTable | 1.3.6.1.4.1.2.3.51.2.4.1.4.4 | not-accessible | Table of RBS User Scope profiles. | |
| INT remoteAccessTamperDelay | 1.3.6.1.4.1.2.3.51.2.4.1.1.6 | INTEGER | read-write | Number in minutes to prohibit a remote login attempt after more than 5 sequential login attempts have failed. |
| remoteAccessUserAuthorityLevelEntry | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1 | not-accessible | User authority level entries. | |
| remoteAccessUserAuthorityLevelTable | 1.3.6.1.4.1.2.3.51.2.4.1.4.2 | not-accessible | Table of user authority level profiles. | |
| OCT remoteAlertIdEmailAddr | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.9 | OCTET STRING | read-write | A null terminated string that contains an E-Mail Address. For example, 'jeb@us.ibm.com'. Used only for an E-mail over Lan or E-Mail over PPP notification type. |
| INT remoteAlertIdEntryIndex | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.1 | INTEGER | read-only | Index for remote alert entry. |
| OCT remoteAlertIdEntryIpOrHostAddress | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.3 | OCTET STRING | read-write | A null terminated string that either contains an IP address of the form '1.2.3.4' or a host name (if DNS is enabled) for the alert entry. |
| INT remoteAlertIdEntryNotificationType | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.5 | INTEGER | read-write | Remote alert entry notification method. Types include unknown when the type can't be determined (read-only), ibmDirectorOverLAN for a LAN alert sent over ethernet to IBM director, snmpOverLan for an SNMP alert over ethernet, and emailOverLan for a E-Mail alert over ethernet. |
| INT remoteAlertIdEntrySelectiveAlert | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.13 | INTEGER | read-write | Remote alert entry selective alert setting. A value of critOnlyAlerts will only send critical alerts to this remote alert receipient, a value of allAlerts will send all alerts to this remote alert recepient. |
| INT remoteAlertIdEntryStatus | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.2 | INTEGER | read-write | Remote alert entry status, invalid means entry not defined yet, disabledAndValid means entry defined but not enabled to send an alert, enabledAndValid means entry defined and enabled to send an alert. |
| OCT remoteAlertIdEntryTextDescription | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.4 | OCTET STRING | read-write | A null terminated string that contains a text description of this entry. |
| remoteAlertIds | 1.3.6.1.4.1.2.3.51.2.4.1.3 | |||
| remoteAlertIdsEntry | 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1 | not-accessible | Remote alert entries. | |
| remoteAlertIdsTable | 1.3.6.1.4.1.2.3.51.2.4.1.3.1 | not-accessible | Table of remote alert entries. This table lets you configure remote alert recipients. You can define up to 12 unique recipients. Note: All selected alert events will be sent to all enabled alert recipients. | |
| INT remoteAlertRetryCount | 1.3.6.1.4.1.2.3.51.2.4.1.1.4 | INTEGER | read-write | Number of additional times a remote alert will be retried if not succesfully sent. A value of zero indicates no retries will be attempted. |
| INT remoteAlertRetryDelay | 1.3.6.1.4.1.2.3.51.2.4.1.1.5 | INTEGER | read-write | Number in seconds to delay between retries if sending a remote alert is unsuccessful. |
| remoteAlerts | 1.3.6.1.4.1.2.3.51.2.4.2 | |||
| remoteAlertsCrit | 1.3.6.1.4.1.2.3.51.2.4.2.1 | |||
| remoteAlertsNonCrit | 1.3.6.1.4.1.2.3.51.2.4.2.2 | |||
| remoteAlertsSystem | 1.3.6.1.4.1.2.3.51.2.4.2.3 | |||
| INT remoteControlBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT remoteControlBladeHealthState | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.5 | INTEGER | read-only | The system health state for the blade server. 0 = unknown, 1 = good, 2 = warning, 3 = bad, 4 = kernel mode, 5 = discovering |
| INT remoteControlBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT remoteControlBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.6 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT remoteControlBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.4 | INTEGER | read-only | The power state for blade server. 0 = off, 1 = on, 255 = unknown. |
| INT remoteControlIndex | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.1 | INTEGER | read-only | Blade remote power control index. |
| INT remoteKVMControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.9 | INTEGER | read-write | Blade KVM enablement status. Note that some types of blades don't support KVM |
| INT remoteMediaTrayControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.8 | INTEGER | read-write | Blade media tray enablement status. |
| INT remotePowerControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.7 | INTEGER | read-write | Blade remote power control enablement status. |
| INT remoteWakeOnLanControlEnable | 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.10 | INTEGER | read-write | Blade Wake On Lan enablement status. |
| INT resetSPConfigAndRestart | 1.3.6.1.4.1.2.3.51.2.7.20 | INTEGER | read-write | Will cause all the ASM information to be reset to it's initial factory defaults (all previous configuration information is lost) and the ASM will be re-started. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT restartBlade | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.8 | INTEGER | read-write | Restart a blade. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT restartBladeClearNVRAM | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.11 | INTEGER | read-write | Restart a blade and set NVRAM to default values. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT restartBladeInvokeDiags | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.12 | INTEGER | read-write | Restart a blade and boot into diagnostic mode. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT restartBladeInvokeDiagsFromDefaultBootList | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.13 | INTEGER | read-write | Restart a blade and boot into diagnostic mode from Default Boot List as defined on the blade. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT restartBladeNMI | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.10 | INTEGER | read-write | Soft reset and initiate a dump on a blade. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT restartBladeSMP | 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.9 | INTEGER | read-write | Restart a blade's system management processor. NOTE: Value returned for the GET command is meaningless for this MIB. |
| restartReset | 1.3.6.1.4.1.2.3.51.2.7 | |||
| INT restartSPImmediately | 1.3.6.1.4.1.2.3.51.2.7.4 | INTEGER | read-write | Restart the ASM immediately. NOTE: Value returned for the GET command is meaningless for this MIB. |
| OCT roleId | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.2 | OCTET STRING | read-only | User ID |
| INT roleIndex | 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.1 | INTEGER | read-only | Index for RBS User Role entry. |
| OCT scopeId | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.2 | OCTET STRING | read-only | User ID |
| INT scopeIndex | 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.1 | INTEGER | read-only | Index for RBS User Scope Entry. |
| INT slpAddrType | 1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 | INTEGER | read-write | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadast value then the multicast address set in in slpMulticastAddt will be ignored. |
| IP slpMulticastAddr | 1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 | IpAddress | read-write | Service Locator Protocol Multicast address |
| OCT smBootRomVpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.6 | OCTET STRING | read-only | Switch module firmware build date. |
| OCT smBootRomVpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.5 | OCTET STRING | read-only | Switch module firmware build ID. |
| smBootRomVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1 | not-accessible | Switch module boot ROM VPD table entry | |
| INT smBootRomVpdExists | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.3 | INTEGER | read-only | Indicates whether the switch module specified exists or not. |
| INT smBootRomVpdId | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.2 | INTEGER | read-only | The switch module numeric identifier. |
| INT smBootRomVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.1 | INTEGER | read-only | Switch module boot ROM VPD entry index. |
| OCT smBootRomVpdRevisionNumber | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.7 | OCTET STRING | read-only | Switch module firmware revision number. |
| INT smBootRomVpdSwitchType | 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.4 | INTEGER | read-only | Indicates the type of switch module installed. |
| smBootRomVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.7.2 | not-accessible | Switch module boot ROM VPD information table. | |
| INT smCfgCtrlEnableDisable | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.6 | INTEGER | read-write | Switch module configuration control enabled or disabled. |
| INT smCfgCtrlOnResetEnableDisable | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.9 | INTEGER | read-write | Switch module configuration control enabled or disabled on resets (default and unsolicited). |
| smControlEntry | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1 | not-accessible | Switch module control table entry | |
| INT smControlIndex | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.1 | INTEGER | read-only | Switch module control table index. |
| smControlTable | 1.3.6.1.4.1.2.3.51.2.22.3.1.1 | not-accessible | Switch module control table. | |
| IP smCurrentGateway | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.8 | IpAddress | read-only | The switch module current IP gateway. |
| IP smCurrentIPAddr | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.6 | IpAddress | read-only | The switch module current IP address. |
| INT smCurrentIPConfigMethod | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.9 | INTEGER | read-only | The switch module current IP configuration method. |
| smCurrentIPInfoEntry | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1 | not-accessible | Switch module current IP table entry | |
| INT smCurrentIPInfoExists | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.3 | INTEGER | read-only | Indicates whether the switch module specified exists or not. |
| INT smCurrentIPInfoId | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.2 | INTEGER | read-only | The switch module numeric identifier. |
| INT smCurrentIPInfoIndex | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.1 | INTEGER | read-only | Switch module current IP info index. |
| INT smCurrentIPInfoPowerState | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.4 | INTEGER | read-only | Indicates whether the switch module specified is powered on or not. |
| smCurrentIPInfoTable | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1 | not-accessible | Switch module current IP information. | |
| IP smCurrentSubnetMask | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.7 | IpAddress | read-only | The switch module current subnet mask. |
| INT smExtEthPortsEnableDisable | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.7 | INTEGER | read-write | Switch module external ethernet ports enabled or disabled. |
| smFirmwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.7 | |||
| smHardwareVpd | 1.3.6.1.4.1.2.3.51.2.2.21.6 | |||
| OCT smHardwareVpdBayNumber | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.2 | OCTET STRING | read-only | Switch module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| smHardwareVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1 | not-accessible | Switch module hardware VPD entry. For consistent results, view as a table and not as individual entries. | |
| OCT smHardwareVpdFruNumber | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.4 | OCTET STRING | read-only | Switch module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| OCT smHardwareVpdFruSerial | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.11 | OCTET STRING | read-only | Switch module hardware VPD FRU Serial. For consistent results, view as a table and not as individual entries. |
| INT smHardwareVpdHardwareRevision | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.5 | INTEGER | read-only | Switch module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. |
| INT smHardwareVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.1 | INTEGER | read-only | Switch module hardware VPD index. For consistent results, view as a table and not as individual entries. |
| OCT smHardwareVpdManufacturingId | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.3 | OCTET STRING | read-only | Switch module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| OCT smHardwareVpdManufDate | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.9 | OCTET STRING | read-only | Switch module hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. |
| OCT smHardwareVpdPartNumber | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.10 | OCTET STRING | read-only | Switch module hardware VPD Part Number. For consistent results, view as a table and not as individual entries. |
| smHardwareVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.6.1 | not-accessible | Table of the switch module hardware components. For consistent results, view as a table and not as individual entries. | |
| OCT smHardwareVpdUuid | 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.8 | OCTET STRING | read-only | Switch module hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| INT smHealthState | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.15 | INTEGER | read-write | The health state for the switch module. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| IP smIPAddress | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.6 | IpAddress | read-only | The switch module current IP address. |
| smLEDs | 1.3.6.1.4.1.2.3.51.2.2.8.4 | |||
| smLEDsEntry | 1.3.6.1.4.1.2.3.51.2.2.8.4.1.1 | not-accessible | Switch module LEDs information entry | |
| smLEDsTable | 1.3.6.1.4.1.2.3.51.2.2.8.4.1 | not-accessible | Table of switch module LEDs information. | |
| OCT smMACAddress | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.5 | OCTET STRING | read-only | Switch module MAC address. |
| OCT smMainApp1VpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.6 | OCTET STRING | read-only | Switch module firmware build date. |
| OCT smMainApp1VpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.5 | OCTET STRING | read-only | Switch module firmware build id. |
| OCT smMainApp1VpdRevisionNumber | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.7 | OCTET STRING | read-only | Switch module firmware revision number. |
| OCT smMainApp2VpdBuildDate | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.9 | OCTET STRING | read-only | Switch module firmware build date. |
| OCT smMainApp2VpdBuildId | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.8 | OCTET STRING | read-only | Switch module firmware build id. |
| OCT smMainApp2VpdRevisionNumber | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.10 | OCTET STRING | read-only | Switch module firmware revision number. |
| smMainAppVpdEntry | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1 | not-accessible | Switch module main application VPD table entry | |
| INT smMainAppVpdExists | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.3 | INTEGER | read-only | Indicates whether the switch module specified exists or not. |
| INT smMainAppVpdId | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.2 | INTEGER | read-only | The switch module numeric identifier. |
| INT smMainAppVpdIndex | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.1 | INTEGER | read-only | Switch module main application VPD entry index. |
| INT smMainAppVpdSwitchType | 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.4 | INTEGER | read-only | Indicates the type of switch module installed. |
| smMainAppVpdTable | 1.3.6.1.4.1.2.3.51.2.2.21.7.1 | not-accessible | Switch module main application VPD information table. | |
| IP smNewGateway | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.8 | IpAddress | read-write | The switch module new IP gateway. |
| IP smNewIPAddr | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.6 | IpAddress | read-write | The switch module new IP address. |
| INT smNewIPConfigEnableDisable | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.10 | INTEGER | read-write | A set command enables a new IP configuration that has been previously defined. A get command indicates whether the new IP configuration information has been enabled. |
| INT smNewIPConfigMethod | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.9 | INTEGER | read-write | The switch module new IP configuration method. |
| smNewIPInfoEntry | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1 | not-accessible | Switch module new IP configuration information table entry | |
| INT smNewIPInfoExists | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.3 | INTEGER | read-only | Indicates whether the switch module specified exists or not. |
| INT smNewIPInfoId | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.2 | INTEGER | read-only | The switch module numeric identifier. |
| INT smNewIPInfoIndex | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.1 | INTEGER | read-only | Switch module new IP info index. |
| INT smNewIPInfoPowerState | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.4 | INTEGER | read-only | Indicates whether the switch module specified is powered on or not. |
| smNewIPInfoTable | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1 | not-accessible | Switch module new IP information. | |
| IP smNewSubnetMask | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.7 | IpAddress | read-write | The switch module new subnet mask. |
| INT smPostResultsAvailable | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.3 | INTEGER | read-only | Describes whether the switch module POST diagnostic result value contained in the smPostResultsValue is valid. |
| OCT smPostResultsValue | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.4 | OCTET STRING | read-only | The range of values and meanings are as follows: 0x00 - 0x7F ( 0 - 127) Base internal functions 0x80 - 0x9F (128 - 159) Internal interface failures 0xA0 - 0xAF (160 - 175) External interface failures 0xB0 - 0xFE (176 - 254) Reserved 0xFF (255) Switch completed POST successfully |
| smPowerRestartEntry | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1 | not-accessible | Switch module power restart table entry | |
| INT smPowerRestartId | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.2 | INTEGER | read-only | The switch module numeric identifier. |
| INT smPowerRestartIndex | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.1 | INTEGER | read-only | Switch module power restart index. |
| smPowerRestartTable | 1.3.6.1.4.1.2.3.51.2.22.3.1.7 | not-accessible | Switch module power restart table. | |
| INT smReset | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.8 | INTEGER | read-write | For the case where the switch module is currently powered on, this command will effectively power off and then power on the switch module indicated and cause it to run its POST test. For the case where the switch module is currently powered off, the command will just power on the switch module. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT smResetToDefault | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.9 | INTEGER | read-write | For the case where the switch module is currently powered on, this command will effectively power off and then power on the switch module indicated and cause it to run its POST test. For the case where the switch module is currently powered off, the command will just power on the switch module. In both cases, the switch module will reset the configuration to the default values. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT smRestartAndRunExtDiag | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.11 | INTEGER | read-write | To power cycle the selected module(s) and then run the extended diagnostic test package. This option is not supported on all I/O modules. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT smRestartAndRunFullDiag | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.12 | INTEGER | read-write | To power cycle the selected module(s) and then run the full diagnostic test package. The full diagnostic test package may take over 5 minutes to run. This option is not supported on all I/O modules. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT smRestartAndRunStdDiag | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.10 | INTEGER | read-write | To power cycle the selected module(s) and then run the standard diagnostic test package. NOTE: Value returned for the GET commnad is meaningless for this MIB. |
| INT smSwitchExists | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.3 | INTEGER | read-only | Indicates whether the switch module specified exists or not. |
| INT smSwitchType | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.4 | INTEGER | read-only | Switch module type. |
| smtpConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.3 | |||
| OCT smtpServerNameOrIPAddress | 1.3.6.1.4.1.2.3.51.2.4.9.3.3.1 | OCTET STRING | read-write | A NULL terminated 64 byte string that contains the SMTP server host name or IP address (a.b.c.d). |
| snmpAgentCommunityConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4 | |||
| snmpAgentConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.1 | |||
| INT snmpAgentPortAssignment | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.6 | INTEGER | read-write | SNMP Agent port number. Default value is 161. SP has to be reset for change to take effect. |
| snmpAgentUserProfileConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9 | |||
| snmpCommunityEntry | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1 | not-accessible | SNMP community entries | |
| OCT snmpCommunityEntryCommunityIpAddress1 | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.3 | OCTET STRING | read-write | SNMP Community IP address or host name. Can either be a dotted decimal IP string (eg. 9.37.44.2) or if DNS is enabled a host name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| OCT snmpCommunityEntryCommunityIpAddress2 | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.4 | OCTET STRING | read-write | SNMP Community IP address or host name. Can either be a dotted decimal IP string (eg. 9.37.44.2) or if DNS is enabled a host name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| OCT snmpCommunityEntryCommunityIpAddress3 | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.5 | OCTET STRING | read-write | SNMP Community IP address or host name. Can either be a dotted decimal IP string (eg. 9.37.44.2) or if DNS is enabled a host name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| OCT snmpCommunityEntryCommunityName | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.2 | OCTET STRING | read-write | SNMP Community entry name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| INT snmpCommunityEntryCommunityViewType | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.6 | INTEGER | read-write | Access Level of the SNMPv1 managers. Note this parameter is set for each community. Therefore all three managers in the same community have the same access level. |
| INT snmpCommunityEntryIndex | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.1 | INTEGER | read-only | Index for SNMP Agent Community entry. |
| snmpCommunityTable | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1 | not-accessible | Table of SNMP Community entries | |
| INT snmpSystemAgentTrapsDisable | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.3 | INTEGER | read-write | Disable or enable SNMP traps. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| OCT snmpSystemContact | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.1 | OCTET STRING | read-write | A NULL terminated 48 byte string that contains the SNMP agent contact name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| OCT snmpSystemLocation | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.2 | OCTET STRING | read-write | A NULL terminated 48 byte string that contains the SNMP agent location name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| INT snmpTrapsPortAssignment | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.7 | INTEGER | read-write | SNMP Traps port number. Default value is 162. SP has to be reset for change to take effect. |
| snmpUserProfileEntry | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1 | not-accessible | SNMP User Profile entries | |
| INT snmpUserProfileEntryAuthProt | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.4 | INTEGER | read-write | SNMPv3 User Profile entry - Authentication Protocol supported by the user. |
| OCT snmpUserProfileEntryContextName | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.3 | OCTET STRING | read-write | SNMPv3 User Profile entry - Context name for the user to access MIB objects. |
| INT snmpUserProfileEntryIndex | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.1 | INTEGER | read-only | Index for SNMPv3 Agent User Profile entry. |
| OCT snmpUserProfileEntryIpAddress | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.9 | OCTET STRING | read-write | SNMPv3 User Profile entry - IP address or host name. Can either be a dotted decimal IP string (eg. 9.37.44.2) or if DNS is enabled a host name. |
| OCT snmpUserProfileEntryPrivPassword | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.7 | OCTET STRING | read-write | SNMPv3 User Profile entry - Privacy password for the user. NOTE: Value returned for the GET command is meaningless for this MIB for security reason. |
| INT snmpUserProfileEntryPrivProt | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.6 | INTEGER | read-write | SNMPv3 User Profile entry - Privacy Protocol supported by the user. |
| INT snmpUserProfileEntryViewType | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.8 | INTEGER | read-write | SNMPv3 User Profile entry - Access level (Get, Set, and Traps) of the user. |
| snmpUserProfileTable | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1 | not-accessible | Table of SNMPv3 User Profile entries | |
| INT snmpv1SystemAgentEnable | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5 | INTEGER | read-write | Disable or enable the SNMPv1 agent. Note: To alter any of the configuration settings for the SNMPv1 agent, the following procedure should be used: (1) This object should be set to 'disabled' (2) Make the modifications to other settings (3) This object should be set to 'enabled' (4) Restart the remote supervisor adapter if this mib is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required. Also note that when attempting to enable this agent, the following are verifed: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled. |
| INT snmpv3SystemAgentEnable | 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6 | INTEGER | read-write | Disable or enable the SNMPv3 agent. Note: To alter any of the configuration settings for the SNMPv3 agent, the following procedure should be used: (1) This object should be set to 'disabled' (2) Make the modifications to other settings (3) This object should be set to 'enabled' (4) Restart the remote supervisor adapter if this mib is changed with respect to the value at system bootup time. For example the SNMPv3 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required. Also note that when attempting to enable this agent, the following are verifed: (1) Is there a valid system contact? (2) Is there a valid system name? If this verification fails an error response will be returned and the SNMPv3 agent will be left disabled. |
| INT solAccumulateTimeout | 1.3.6.1.4.1.2.3.51.2.4.10.1.3 | INTEGER | read-write | This value specifies how much time in milisecond SOL to buffer data before sending the next SOL packet since the last SOL packet was transmitted. Valid value from 5 ms to 1275 ms. The value is in 5 ms increment. Value is not in 5 ms increment will be truncated to a nearest 5s. Default value is 5 ms. |
| INT solBladeCapability | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.6 | INTEGER | read-only | display whether or not the blade support SOL feature. |
| solBladeConfig | 1.3.6.1.4.1.2.3.51.2.4.10.2 | |||
| INT solBladeEnable | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.3 | INTEGER | read-write | Disable or enable a SOL on a blade. |
| solBladeEntry | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1 | not-accessible | SOL Blade table entry | |
| INT solBladeIndex | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.1 | INTEGER | read-only | SOL Blade table index. |
| IP solBladeIpAddr | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.4 | IpAddress | read-only | IP address of the Blade. |
| OCT solBladeName | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.2 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT solBladeSessionStatus | 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.5 | INTEGER | read-only | Status of a blade SOL session: solSessionNotReady: no SOL session connected to the blade. solSessionReady: there is an SOL session to the blade. solSessionActive: there is an SOL session to the blade and there is a client using the SOL session. |
| solBladeTable | 1.3.6.1.4.1.2.3.51.2.4.10.2.1 | not-accessible | SOL Blade configuration table. | |
| INT solCharSendThreshold | 1.3.6.1.4.1.2.3.51.2.4.10.1.4 | INTEGER | read-write | This value specifies how many characters SOL to buffer before sending the next SOL packet since the last SOL packet was transmitted. Valid value is from 1 to 255 |
| solConfiguration | 1.3.6.1.4.1.2.3.51.2.4.10 | |||
| INT solEnable | 1.3.6.1.4.1.2.3.51.2.4.10.1.1 | INTEGER | read-write | Disable/Enable SOL dynamically. |
| OCT solExitToCliKeySeq | 1.3.6.1.4.1.2.3.51.2.4.10.1.7 | OCTET STRING | read-write | This is the keystroke sequence used to escape out of SOL session and back to CLI console. This sequence must have at least one character. The caret symbol (^) has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage return). All ocurrences of ^ will be interpreted as part of a Ctrl sequence. Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences. The default value for this field is '^[(' i.e. ESC followed by (. |
| solGlobalConfig | 1.3.6.1.4.1.2.3.51.2.4.10.1 | |||
| OCT solResetBladeKeySeq | 1.3.6.1.4.1.2.3.51.2.4.10.1.8 | OCTET STRING | read-write | This is the keystroke sequence used to reset the blade while in SOL session console. This sequence must have at least one character. The caret symbol (^) has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage return). All ocurrences of ^ will be interpreted as part of a Ctrl sequence. Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences. The default value for this field is '^[R^[r^[R' i.e. ESC R ESC r ESC R. |
| INT solRetry | 1.3.6.1.4.1.2.3.51.2.4.10.1.5 | INTEGER | read-write | Retry count. Valid value from 0-7. 0 means no retries after packet is transmitted. Packet will be dropped if no ACK/NACK received by the time retries expired. |
| INT solRetryInterval | 1.3.6.1.4.1.2.3.51.2.4.10.1.6 | INTEGER | read-write | Retry Interval in 10 ms increment. Sets the time that the SOL will wait before the first retry and the time between retries when sending SOL packets to the remote blade. Value range is from 0 to 2550 ms in 10 ms increment. 0 means retries will be sent back-to-back. |
| INT solVlanId | 1.3.6.1.4.1.2.3.51.2.4.10.1.2 | INTEGER | read-write | SOL VLAN Id number. Valid number is from 1 to 4095. |
| spClock | 1.3.6.1.4.1.2.3.51.2.4.4 | |||
| OCT spClockDateAndTimeSetting | 1.3.6.1.4.1.2.3.51.2.4.4.1 | OCTET STRING | read-write | ASM clock date and time setting. A date-time specification for the local time of day. For example to set the date and time to March 4, 2001 at 06:00:00AM, set the value to:'03/04/2001,06:00:00'. field contents range _____ ________ _____ 1 month 01..12 2 separator '/' 3 day 01..31 4 separator '/' 5 year 2000..2089 6 separator ',' 7 hour 00..23 8 separator ':' 9 minutes 00..59 10 separator ':' 11 seconds 00..59 |
| OCT spClockTimezoneSetting | 1.3.6.1.4.1.2.3.51.2.4.4.2 | OCTET STRING | read-write | ASM clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST) settings. The following table lists GMT offsets and associated DST information. DST is not observed in time zones where the 'Observe DST' value does not contain 'yes' in the table. Also, note that in some cases additional information is required to determine the clock adjustment when DST is observed. The additional information is required when the GMT offset being written is +2:00 or +10:00. Examples -to set the GMT offset to +3:30, set the value to:'+3:30,no' -for Eastern Standard Time and observing DST, set the value to:'-5:00,yes' -for Egypt and observing DST, set the value to:'+2:00,yes,6' GMT Observe Additional Offset DST? DST value ______ _______ __________ +0:00 yes|no +1:00 yes|no +2:00 yes|no When 'Observe DST?' value is 'yes': 5 (for E.Europe) 4 (for GTB) 6 (for Egypt) 7 (for FLE) +3:00 yes|no +3:30 yes|no +4:00 no +4:30 no +5:00 yes|no +5:30 no +6:00 no +7:00 no +8:00 no +9:00 yes|no +9:30 yes|no +10:00 yes|no When 'Observe DST?' value is 'yes': 9 (for AUS Eastern) 10 (for Tasmania) 4 (for Vladivostok) +11:00 no +12:00 yes|no -12:00 no -11:00 no -10:00 no -9:00 yes|no -8:00 yes|no -7:00 yes|no -6:00 yes|no -5:00 yes|no -4:00 yes|no -3:30 yes|no -3:00 yes|no -2:00 yes|no -1:00 yes|no |
| spIdentification | 1.3.6.1.4.1.2.3.51.2.4.5 | |||
| spStatus | 1.3.6.1.4.1.2.3.51.2.2.5 | |||
| OCT spTxtId | 1.3.6.1.4.1.2.3.51.2.4.5.1 | OCTET STRING | read-write | ASM text ID. Note: Do not put any 'space characters' at end of the ID. |
| INT sshPortAssignment | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.5 | INTEGER | read-write | SSH port number. Default value is 22. SP has to be reset for change to take effect. |
| switchCurrentNwCfg | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1 | |||
| switchMgmtNetworkCfg | 1.3.6.1.4.1.2.3.51.2.22.3.2.1 | |||
| switchModule | 1.3.6.1.4.1.2.3.51.2.22.3 | |||
| switchModuleConfig | 1.3.6.1.4.1.2.3.51.2.22.3.2 | |||
| switchModuleControl | 1.3.6.1.4.1.2.3.51.2.22.3.1 | |||
| INT switchModuleControlId | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.2 | INTEGER | read-only | The switch module numeric identifier. |
| INT switchModuleMemDiagEnableDisable | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.5 | INTEGER | read-write | Switch module memory diagnostics enabled or disabled. |
| INT switchModulePowerOnOff | 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.7 | INTEGER | read-write | Switch module power on or power off. If powering on a currently powered off switch module, then the switch module will execute a POST. The results of this POST will need to be retrieved using the 'Post Results' command. Note: When powering off a currently powered on switch module, a minimum of 1 second is needed to allow the switch to power off before powering back on the switch. |
| switchNewNwCfg | 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2 | |||
| INT switchOverRedundantMM | 1.3.6.1.4.1.2.3.51.2.7.7 | INTEGER | read-write | Switch over to the redundant Management Module. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT switchPingRequest | 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.8 | INTEGER | read-write | Sends a ping to a switch module's current IP address. NOTE: Value returned for the GET command is meaningless for this MIB. |
| INT systemBladeThrottling | 1.3.6.1.4.1.2.3.51.2.4.2.3.13 | INTEGER | read-write | Generate an alert if any of the server blades are throttling. |
| INT systemErrorLED | 1.3.6.1.4.1.2.3.51.2.2.8.1.1 | INTEGER | read-only | Indicates whether the front panel system error LED is on or off. NOTE: This MIB is for Blade Center Enterprise only. |
| systemHealth | 1.3.6.1.4.1.2.3.51.2.2.7 | |||
| INT systemHealthStat | 1.3.6.1.4.1.2.3.51.2.2.7.1 | INTEGER | read-only | Indicates status of system health for the system in which the ASM resides. Value of 'critical' indicates a severe error has occurred and the system may not be functioning. A value of 'nonCritical' indicates that a error has occurred but the system is currently functioning properly.A value of 'systemLevel' indicates that a condition has occurred that may change the state of the system in the future but currently the system is working properly. A value of 'normal' indicates that the system is operating normally. |
| OCT systemHealthSummaryDescription | 1.3.6.1.4.1.2.3.51.2.2.7.2.1.3 | OCTET STRING | read-only | System health summary description. NOTE: This MIB is for Blade Center Enterprise only. |
| systemHealthSummaryEntry | 1.3.6.1.4.1.2.3.51.2.2.7.2.1 | not-accessible | System Health Summary entry NOTE: This MIB is for Blade Center Enterprise only. | |
| INT systemHealthSummaryIndex | 1.3.6.1.4.1.2.3.51.2.2.7.2.1.1 | INTEGER | read-only | System health summary index. NOTE: This MIB is for Blade Center Enterprise only. |
| OCT systemHealthSummarySeverity | 1.3.6.1.4.1.2.3.51.2.2.7.2.1.2 | OCTET STRING | read-only | System health summary severity. NOTE: This MIB is for Blade Center Enterprise only. |
| systemHealthSummaryTable | 1.3.6.1.4.1.2.3.51.2.2.7.2 | not-accessible | Table of System Health summary. Contains more detailed information about the reasons for the overall system health status. NOTE: This MIB is for Blade Center Enterprise only. | |
| INT systemInventory | 1.3.6.1.4.1.2.3.51.2.4.2.3.10 | INTEGER | read-write | Generate an alert if the a processor blade or media tray is added or removed. |
| INT systemLog75PctFull | 1.3.6.1.4.1.2.3.51.2.4.2.3.11 | INTEGER | read-write | Generate an alert if the system log reaches 75% full. |
| INT systemPFA | 1.3.6.1.4.1.2.3.51.2.4.2.3.8 | INTEGER | read-write | Generate a alert if the system hardware detects a Predictive Failure Analysis(PFA) on PFA enabled hardware. |
| INT systemPowerManagement | 1.3.6.1.4.1.2.3.51.2.4.2.3.14 | INTEGER | read-write | Generate an alert if the system detects a power oversubscription condition or power supply mismatch in a power domain. |
| INT systemPowerOff | 1.3.6.1.4.1.2.3.51.2.4.2.3.4 | INTEGER | read-write | Generate an alert if the system is powered off. |
| INT systemPowerOn | 1.3.6.1.4.1.2.3.51.2.4.2.3.5 | INTEGER | read-write | Generate a alert if the system is powered on. |
| tcpApplicationConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.4 | |||
| tcpPortAssignmentCfg | 1.3.6.1.4.1.2.3.51.2.4.9.3.5 | |||
| INT tcpPortsRestoreDefault | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.1 | INTEGER | read-write | HTTP port number. Default value is 80. Once changed, the url's have to include :port at the end. SP has to be reset for change to take effect. NOTE: Value returned for the GET command is meaningless for this MIB. |
| tcpProtocols | 1.3.6.1.4.1.2.3.51.2.4.9.3 | |||
| OCT telcoAlarmAck | 1.3.6.1.4.1.2.3.51.2.5.1.2 | OCTET STRING | read-write | Acknowledge an alarm. An input octet string consists of the alarm key ID expressed as 'mmm:aaa:ggg:iii' where: m : Module ID value of decimal digits(1-255) or blank space(s) for leading zero(s) a : Alarm ID value of decimal digits(1-255) or blank space(s) for leading zero(s) g : Gen ID value of decimal digits(1-255) or blank space(s) for leading zero(s) i : GenInfo ID value of decimal digits(1-255) or blank space(s) for leading zero(s) NOTE 1: Value returned for the GET command is meaningless for this MIB. NOTE 2: This MIB is for Blade Center Telco only. |
| OCT telcoAlarmClear | 1.3.6.1.4.1.2.3.51.2.5.1.3 | OCTET STRING | read-write | Clear an active alarm. An input octet string consists of the alarm key ID expressed as 'mmm:aaa:ggg:iii' where: m : Module ID value of decimal digits(1-255) or blank space(s) for leading zero(s) a : Alarm ID value of decimal digits(1-255) or blank space(s) for leading zero(s) g : Gen ID value of decimal digits(1-255) or blank space(s) for leading zero(s) i : GenInfo ID value of decimal digits(1-255) or blank space(s) for leading zero(s) NOTE1 : Value returned for the GET command is meaningless for this MIB. NOTE 2: This MIB is for Blade Center Telco only. |
| telcoAlarmReq | 1.3.6.1.4.1.2.3.51.2.5.1 | |||
| OCT telcoAlarmSet | 1.3.6.1.4.1.2.3.51.2.5.1.1 | OCTET STRING | read-write | Create a software alarm. An input octet string consists of the alarm severity level and the alarm description (40 bytes max). The following severity levels are valid : CRT Critical MJR Major MNR Minor NOTE 1: Value returned for the GET command is meaningless for this MIB. NOTE 2: This MIB is for Blade Center Telco only. |
| INT telcoColorSel | 1.3.6.1.4.1.2.3.51.2.2.8.3.5 | INTEGER | read-write | Indicates whether the Telco Critical and Major LEDs are displayed in amber or red color. NOTE: This MIB is for Blade Center Telco only. |
| INT telcoIdentityLED | 1.3.6.1.4.1.2.3.51.2.2.8.3.4 | INTEGER | read-write | Indicates whether the Telco Panel identity LED is on or off. NOTE: This MIB is for Blade Center Telco only. |
| telcoManagement | 1.3.6.1.4.1.2.3.51.2.5 | |||
| telcoOEM | 1.3.6.1.4.1.2.3.51.2.5.127 | |||
| OCT telcoOEMs | 1.3.6.1.4.1.2.3.51.2.5.127.1 | OCTET STRING | read-only | A bitmap of information about the contents of this subtree. The bitmap is a variable length string containing a list of 1's and 0's. Every bit that is set to 1 has a corresponding subtree entry that is supported in firmware, while a 0 means that the subtree entry is unavailable. |
| telcoPanelLEDs | 1.3.6.1.4.1.2.3.51.2.2.8.3 | |||
| telcoSystemHealth | 1.3.6.1.4.1.2.3.51.2.2.9 | |||
| INT telcoSystemHealthStat | 1.3.6.1.4.1.2.3.51.2.2.9.1 | INTEGER | read-only | Indicates status of system health for the system in which the ASM resides. Value of 'critical' indicates a non-recoverable service affecting condition has occurred that requires an immediate action. A value of 'major' indicates a critical service affecting condition has occurred that requires an urgent action. A value of 'minor' indicates a non-service affecting condition has occurred. Corrective action should be taken in order to prevent a more serious fault. A value of 'normal' indicates that the system is operating normally. Severity level with '-power' indicates the failure relates to the power resource. NOTE: This MIB is for Blade Center Telco only. |
| INT telcoSystemHealthSummaryAcknowledge | 1.3.6.1.4.1.2.3.51.2.2.9.2.1.6 | INTEGER | read-only | Telco System Health Summary Acknowledge. Indicates whether the alarm event is acknowledged or unacknowledged. NOTE: This MIB is for Blade Center Telco only. |
| OCT telcoSystemHealthSummaryDescription | 1.3.6.1.4.1.2.3.51.2.2.9.2.1.3 | OCTET STRING | read-only | Telco System Health Summary Description. NOTE: This MIB is for Blade Center Telco only. |
| telcoSystemHealthSummaryEntry | 1.3.6.1.4.1.2.3.51.2.2.9.2.1 | not-accessible | Telco System Health Summary entry. NOTE: This MIB is for Blade Center Telco only. | |
| OCT telcoSystemHealthSummaryEventKeyID | 1.3.6.1.4.1.2.3.51.2.2.9.2.1.5 | OCTET STRING | read-only | Telco System Health Summary Event Key ID. An octet string expressed as 'mmm:aaa:ggg:iii' where: m : Module ID value of decimal digits(1-255) or blank space(s) for leading zero(s) a : Alarm ID value of decimal digits(1-255) or blank space(s) for leading zero(s) g : Gen ID value of decimal digits(1-255) or blank space(s) for leading zero(s) i : GenInfo ID value of decimal digits(1-255) or blank space(s) for leading zero(s) NOTE: This MIB is for Blade Center Telco only. |
| INT telcoSystemHealthSummaryEventName | 1.3.6.1.4.1.2.3.51.2.2.9.2.1.4 | INTEGER | read-only | Telco System Health Summary Event Name. NOTE: This MIB is for Blade Center Telco only. |
| INT telcoSystemHealthSummaryIndex | 1.3.6.1.4.1.2.3.51.2.2.9.2.1.1 | INTEGER | read-only | Telco System Health Summary Index. NOTE: This MIB is for Blade Center Telco only. |
| OCT telcoSystemHealthSummarySeverity | 1.3.6.1.4.1.2.3.51.2.2.9.2.1.2 | OCTET STRING | read-only | Telco System Health Summary Severity. The values and meanings are as follows: 0x06 Critical-Power 0x05 Critical 0x04 Major-Power 0x03 Major 0x02 Minor-Power 0x01 Minor 0xFF Normal NOTE: This MIB is for Blade Center Telco only. |
| telcoSystemHealthSummaryTable | 1.3.6.1.4.1.2.3.51.2.2.9.2 | not-accessible | Table of System Health summary. Contains more detailed information about the reasons for the overall system health status. NOTE: This MIB is for Blade Center Telco only. | |
| INT telnetInactivityTimeout | 1.3.6.1.4.1.2.3.51.2.4.9.3.4.1 | INTEGER | read-write | Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. |
| INT telnetPortAssignment | 1.3.6.1.4.1.2.3.51.2.4.9.3.5.4 | INTEGER | read-write | telnet port number. Default value is 23. SP has to be reset for change to take effect. |
| temperature | 1.3.6.1.4.1.2.3.51.2.2.1 | |||
| INT temperatureBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT temperatureBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT temperatureBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.5 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT temperatureBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| OCT temperatureCPU1 | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.6 | OCTET STRING | read-only | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU1HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.6 | OCTET STRING | read-only | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediately. If enabled, a critical alert/event will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU1Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.7 | OCTET STRING | read-only | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU1WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.8 | OCTET STRING | read-only | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been created then the alert/event will be reset. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU2 | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.7 | OCTET STRING | read-only | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU2HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.9 | OCTET STRING | read-only | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediately. If enabled, a critical alert/event will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU2Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.10 | OCTET STRING | read-only | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU2WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.11 | OCTET STRING | read-only | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been created then the alert/event will be reset. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU3 | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.8 | OCTET STRING | read-only | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU3HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.12 | OCTET STRING | read-only | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediately. If enabled, a critical alert/event will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU3Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.13 | OCTET STRING | read-only | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU3WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.14 | OCTET STRING | read-only | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been created then the alert/event will be reset. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU4 | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.9 | OCTET STRING | read-only | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU4HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.15 | OCTET STRING | read-only | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediately. If enabled, a critical alert/event will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU4Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.16 | OCTET STRING | read-only | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureCPU4WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.17 | OCTET STRING | read-only | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been created then the alert/event will be reset. An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureDASD1 | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.10 | OCTET STRING | read-only | The blade DASD temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureDASD1HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.18 | OCTET STRING | read-only | The blade DASD hard shutdown temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureDASD1Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.19 | OCTET STRING | read-only | The blade DASD warning temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureDASD1WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.20 | OCTET STRING | read-only | The blade DASD warning reset temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| INT temperatureIndex | 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.1 | INTEGER | read-only | Blade temperatures table index. |
| INT temperatureLED | 1.3.6.1.4.1.2.3.51.2.2.8.1.3 | INTEGER | read-only | Indicates whether the front panel temperature LED is on or off. NOTE: This MIB is for Blade Center Enterprise only. |
| OCT temperatureSensor1HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.22 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor1Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.23 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor1WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.24 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor2HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.25 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor2Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.26 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor2WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.27 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor3HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.28 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor3Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.29 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor3WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.30 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor4HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.31 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor4Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.32 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor4WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.33 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor5HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.34 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor5Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.35 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor5WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.36 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor6HardShutdown | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.37 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor6Warning | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.38 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| OCT temperatureSensor6WarningReset | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.39 | OCTET STRING | read-only | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off. |
| INT temperatureThresholdBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT temperatureThresholdBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT temperatureThresholdBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.5 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT temperatureThresholdBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| INT temperatureThresholdIndex | 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.1 | INTEGER | read-only | Blade temperature threshold table index. |
| INT ualAccountManagement | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.5 | INTEGER | read-write | User can add/modify/delete users and change the global login settings in the Login Profiles panel. |
| INT ualAdapterAdvancedConfig | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.12 | INTEGER | read-write | User has no restrictions when configuring the adapter. In addition, the user is said to have administrative access to the RSA, meaning that the user can also perform the following advanced functions: firmware upgrades, PXE network boot, restore adapter factory defaults, modify and restore adapter configuration from a configuration file, and restart/reset the adapter. |
| INT ualAdapterBasicConfig | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.10 | INTEGER | read-write | User can modify configuration parameters in the System Settings and Alerts panels. |
| INT ualAdapterNetworkAndSecurityConfig | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.11 | INTEGER | read-write | User can modify configuration parameters in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels. |
| INT ualAllowClearLog | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.9 | INTEGER | read-write | User can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs. |
| INT ualConsoleAccess | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.6 | INTEGER | read-write | User can access the remote console. |
| INT ualConsoleAndVirtualMediaAccess | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.7 | INTEGER | read-write | User can access both the remote console and the virtual media feature. |
| OCT ualId | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.2 | OCTET STRING | read-only | User ID |
| INT ualIndex | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.1 | INTEGER | read-only | Index for User Authority Level entry. |
| INT ualReadOnly | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.4 | INTEGER | read-write | User has only read-only access, and cannot perform any save, modify, clear, or state affecting operations (eg. restart ASM, restore defaults, upgrade the firmware, etc.). |
| INT ualServerPowerAccess | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.8 | INTEGER | read-write | User can access the power on and restart functions for the remote server. These functions are available via the Power/Restart panel. |
| INT ualSupervisor | 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.3 | INTEGER | read-write | User has no restrictions. |
| uplinkCheckConfig | 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | |||
| INT uplinkCheckDelay | 1.3.6.1.4.1.2.3.51.2.4.9.3.7.2 | INTEGER | read-write | Delay, in minutes, between discovery of a failed network uplink and the subsequent MM failover. |
| INT uplinkCheckEnabled | 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1 | INTEGER | read-write | Disable or enable network uplink checking. |
| INT userAuthenticationMethod | 1.3.6.1.4.1.2.3.51.2.4.1.1.7 | INTEGER | read-write | Use this field to specify how users attempting to login should be authenticated. There are two methods: Local authentication. Userid and password are verified by searching the list of users locally configured under Local Login Profiles. LDAP based authentication. Users are authenticated via a remote LDAP server. One or both authentication methods can be selected. If both methods should be used, the order must be specified. |
| voltage | 1.3.6.1.4.1.2.3.51.2.2.2 | |||
| INT voltageBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT voltageBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT voltageBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.5 | OCTET STRING | read-only | The name of the blade as a null terminated string. |
| INT voltageBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| INT voltageIndex | 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.1 | INTEGER | read-only | Blade voltages table index. |
| INT voltageThresholdBladeExists | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.3 | INTEGER | read-only | Indicates whether the server blade specified exists or not. |
| INT voltageThresholdBladeId | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.2 | INTEGER | read-only | The numeric blade ID. |
| OCT voltageThresholdBladeName | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.5 | OCTET STRING | read-write | The name of the blade as a null terminated string. |
| INT voltageThresholdBladePowerState | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.4 | INTEGER | read-only | Indicates whether the server blade specified is powered on or not. |
| OCT voltageThresholdEntryCurrentValue | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.3 | OCTET STRING | read-only | Voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| INT voltageThresholdEntryIndex | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.1 | INTEGER | read-only | Index for voltage threshold entry. |
| OCT voltageThresholdEntryName | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.2 | OCTET STRING | read-only | Voltage threshold entry null terminated string that contains the power supply's name, for example '+5V'. |
| OCT voltageThresholdEntryWarningHighValue | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.6 | OCTET STRING | read-only | Voltage threshold reading expressed in Volts(V). If the voltage rises above this value, a warning alert/event, if enabled, will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT voltageThresholdEntryWarningLowValue | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.10 | OCTET STRING | read-only | Voltage threshold reading expressed in Volts(V). If the voltage drops below this value, a warning alert/event, if enabled, will be generated. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT voltageThresholdEntryWarningResetHighValue | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.7 | OCTET STRING | read-only | Voltage threshold reading expressed in Volts(V). If the voltage rises above this value and if a warning alert/event had previously been created, then the alert/event will be reset. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| OCT voltageThresholdEntryWarningResetLowValue | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.11 | OCTET STRING | read-only | Voltage threshold reading expressed in Volts(V). If the voltage drops below this value and if a warning alert/event had previously been created, then the alert/event will be reset. An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system. |
| INT voltageThresholdIndex | 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.1 | INTEGER | read-only | Blade voltage thresholds table index. |
| voltageThresholds | 1.3.6.1.4.1.2.3.51.2.2.20.2 | |||
| voltageThresholdsEntry | 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1 | not-accessible | Voltage threshold entries. NOTE: This MIB is for Blade Center Enterprise only. | |
| voltageThresholdsTable | 1.3.6.1.4.1.2.3.51.2.2.20.2.1 | not-accessible | Table of voltage threshold entries. NOTE: This MIB is for Blade Center Enterprise only. | |
| vpdInformation | 1.3.6.1.4.1.2.3.51.2.2.21 | |||
| INT warnMediaTrayKVMSwitch | 1.3.6.1.4.1.2.3.51.2.4.2.2.7 | INTEGER | read-write | Generate an alert if the system detects a Media Tray or KVM switching failure. |
| INT warnRedundantModule | 1.3.6.1.4.1.2.3.51.2.4.2.2.6 | INTEGER | read-write | Generate an alert if any of the switch modules or management modules is failing or removed. |
| INT warnSingleBlower | 1.3.6.1.4.1.2.3.51.2.4.2.2.2 | INTEGER | read-write | Generate an alert if one blower used for cooling the system fails. |
| INT warnTemp | 1.3.6.1.4.1.2.3.51.2.4.2.2.3 | INTEGER | read-write | Generate an alert if any of the monitored temperature sensors in the system exceed their warning threshold. |
| INT warnVoltage | 1.3.6.1.4.1.2.3.51.2.4.2.2.4 | INTEGER | read-write | Generate an alert if any of the monitored power supply sensors in the system fall outside their specified warning operational range. |
RFC description
IBM BladeCenter Management Module MIB for configuration and monitoring of blade servers.
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.