BLADE-MIB :: warnSingleBlower

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADE-MIBwarnSingleBlower

warnSingleBlower

Module: BLADE-MIB

OID (symbolic): BLADE-MIB::warnSingleBlower

OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.2.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Generate an alert if one blower used for cooling the system fails.

What is warnSingleBlower?

This read-write flag, when enabled, tells the management module to generate a (non-critical) warning alert if just one cooling blower fails, as opposed to critMultiBlower which fires only when multiple blowers fail.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.2.2.2
snmpwalk -v2c -c public <target> BLADE-MIB::warnSingleBlower

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.2.2.2.1
snmpget -v2c -c public <target> BLADE-MIB::warnSingleBlower.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.2.2.2.1 i <value>

Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::warnSingleBlower OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4configureSPBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.2remoteAlertsBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.2.2remoteAlertsNonCritBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.2.2.2warnSingleBlowerBLADE-MIB