All MIBs › BLADE-MIB › intEthernetInterfaceEnabled
intEthernetInterfaceEnabled
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::intEthernetInterfaceEnabled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Disable or enable the internal ethernet interface. Note: To alter any of the configuration settings for the ethernet interface, the following procedure should be used: (1) This object should be set to 'interfaceDisabled' (2) Make the modifications to other settings (3) This object should be set to 'interfaceEnabled' (4) Restart the remote supervisor adapter
Also note that when attempting to enable this interface, the remote IP address is verified to be nonzero. If this verification fails, an error response will be returned and the internal ethernet interface will be left disabled.
What is intEthernetInterfaceEnabled?
Disables or enables the management module's internal network interface. The MIB directs admins to disable it, make any other configuration changes to that interface, then re-enable it and restart the management module; enabling also requires that a nonzero remote IP address is already configured, or the interface is left disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2 snmpwalk -v2c -c public <target> BLADE-MIB::intEthernetInterfaceEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2.1 snmpget -v2c -c public <target> BLADE-MIB::intEthernetInterfaceEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::intEthernetInterfaceEnabled OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2 | intEthernetInterface | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2 | intEthernetInterfaceEnabled | BLADE-MIB |