BLADE-MIB :: bistSecondaryMainAppFlashImage

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADE-MIBbistSecondaryMainAppFlashImage

bistSecondaryMainAppFlashImage

Module: BLADE-MIB

OID (symbolic): BLADE-MIB::bistSecondaryMainAppFlashImage

OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.5.2.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Sp BIST Com 2test result.

What is bistSecondaryMainAppFlashImage?

Reports the pass/fail result of the BIST covering the management module's secondary (backup) application flash image. This is the fallback firmware bank, so a failure here combined with a healthy primary image is less urgent than the reverse.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.2.9
snmpwalk -v2c -c public <target> BLADE-MIB::bistSecondaryMainAppFlashImage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.2.9.1
snmpget -v2c -c public <target> BLADE-MIB::bistSecondaryMainAppFlashImage.1

Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::bistSecondaryMainAppFlashImage OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2monitorsBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.5spStatusBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.5.2mmBistAndChassisStatusBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.5.2.9bistSecondaryMainAppFlashImageBLADE-MIB