All MIBs › BLADE-MIB › snmpv3SystemAgentEnable
snmpv3SystemAgentEnable
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::snmpv3SystemAgentEnable
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Disable or enable the SNMPv3 agent.
Note: To alter any of the configuration settings for the SNMPv3 agent, the following procedure should be used: (1) This object should be set to 'disabled' (2) Make the modifications to other settings (3) This object should be set to 'enabled' (4) Restart the remote supervisor adapter if this mib is changed with respect to the value at system bootup time. For example the SNMPv3 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required.
Also note that when attempting to enable this agent, the following are verifed: (1) Is there a valid system contact? (2) Is there a valid system name?
If this verification fails an error response will be returned and the SNMPv3 agent will be left disabled.
What is snmpv3SystemAgentEnable?
Disables or enables the management module's SNMPv3 agent, following the same disable-configure-enable procedure as the SNMPv1 agent. Enabling requires a valid system contact and system name, or the agent is left disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6 snmpwalk -v2c -c public <target> BLADE-MIB::snmpv3SystemAgentEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6.1 snmpget -v2c -c public <target> BLADE-MIB::snmpv3SystemAgentEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::snmpv3SystemAgentEnable OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1 | snmpAgentConfig | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6 | snmpv3SystemAgentEnable | BLADE-MIB |