BLADE-MIB :: plus12Volt

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADE-MIBplus12Volt

plus12Volt

Module: BLADE-MIB

OID (symbolic): BLADE-MIB::plus12Volt

OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.2.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: +12 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system.

What is plus12Volt?

Reports the measured output of the +12V planar power rail as a signed voltage string such as '+12.05 Volts'. It is one of several rail-specific voltage sensors on the board, so a bad reading here (versus the other rails being fine) points to a problem specific to the +12V supply.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.2.1.3
snmpwalk -v2c -c public <target> BLADE-MIB::plus12Volt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.2.1.3.1
snmpget -v2c -c public <target> BLADE-MIB::plus12Volt.1

Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::plus12Volt OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2monitorsBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.2voltageBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.2.1planarVoltBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.2.1.3plus12VoltBLADE-MIB