BLADE-MIB :: telcoAlarmClear

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADE-MIBtelcoAlarmClear

telcoAlarmClear

Module: BLADE-MIB

OID (symbolic): BLADE-MIB::telcoAlarmClear

OID (numeric): 1.3.6.1.4.1.2.3.51.2.5.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Clear an active alarm. An input octet string consists of the alarm key ID expressed as 'mmm:aaa:ggg:iii' where: m : Module ID value of decimal digits(1-255) or blank space(s) for leading zero(s) a : Alarm ID value of decimal digits(1-255) or blank space(s) for leading zero(s) g : Gen ID value of decimal digits(1-255) or blank space(s) for leading zero(s) i : GenInfo ID value of decimal digits(1-255) or blank space(s) for leading zero(s)

NOTE1 : Value returned for the GET command is meaningless for this MIB.

NOTE 2: This MIB is for Blade Center Telco only.

What is telcoAlarmClear?

Writing to this object clears an active alarm on Telco-variant BladeCenter hardware, using the same 'mmm:aaa:ggg:iii' alarm key ID format as telcoAlarmAck, but to dismiss the alarm entirely rather than just acknowledge it. The GET value is meaningless and it only applies to Blade Center Telco systems.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.5.1.3
snmpwalk -v2c -c public <target> BLADE-MIB::telcoAlarmClear

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.5.1.3.1
snmpget -v2c -c public <target> BLADE-MIB::telcoAlarmClear.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.5.1.3.1 s <value>

Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::telcoAlarmClear OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.5telcoManagementBLADE-MIB
1.3.6.1.4.1.2.3.51.2.5.1telcoAlarmReqBLADE-MIB
1.3.6.1.4.1.2.3.51.2.5.1.3telcoAlarmClearBLADE-MIB