All MIBs › BLADE-MIB › uplinkCheckEnabled
uplinkCheckEnabled
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::uplinkCheckEnabled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Disable or enable network uplink checking.
What is uplinkCheckEnabled?
This read-write toggle turns network uplink checking on or off for the management module. When enabled, the module actively monitors whether its network uplink is functioning so it can trigger a failover if the link goes down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1 snmpwalk -v2c -c public <target> BLADE-MIB::uplinkCheckEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1.1 snmpget -v2c -c public <target> BLADE-MIB::uplinkCheckEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::uplinkCheckEnabled OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | uplinkCheckConfig | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1 | uplinkCheckEnabled | BLADE-MIB |