All MIBs › BLADE-MIB › resetSPConfigAndRestart
resetSPConfigAndRestart
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::resetSPConfigAndRestart
OID (numeric): 1.3.6.1.4.1.2.3.51.2.7.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Will cause all the ASM information to be reset to it's initial factory defaults (all previous configuration information is lost) and the ASM will be re-started.
NOTE: Value returned for the GET command is meaningless for this MIB.
What is resetSPConfigAndRestart?
Setting this object to 'execute' resets all ASM (management module) configuration back to factory defaults -- discarding any prior configuration -- and then restarts the module. This is a destructive action an admin would use only when they want a clean-slate reconfiguration; the GET value is meaningless.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.7.20 snmpwalk -v2c -c public <target> BLADE-MIB::resetSPConfigAndRestart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.7.20.1 snmpget -v2c -c public <target> BLADE-MIB::resetSPConfigAndRestart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.7.20.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::resetSPConfigAndRestart OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.7 | restartReset | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.7.20 | resetSPConfigAndRestart | BLADE-MIB |