HPN-ICF-NAT-MIB

All MIBs › HPN-ICF-NAT-MIB

Last Updated: 2005--0-1-

Category: IP and Core Protocols, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Network Address Translation (NAT) address pools, static/dynamic mappings, and session statistics on HP/Comware.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-NAT-MIB?

HPN-ICF-NAT-MIB is a private HP/H3C (Comware ICF, Intelligent Configuration Framework) MIB module that manages Network Address Translation (NAT) features on HP/H3C/HPE networking switches and routers. It exposes configuration and operational data covering NAT address pools, static and dynamic address/port mapping entries, and per-session translation statistics. Although mostly a configuration MIB, it supports operational monitoring of NAT resource usage, such as how many pool addresses or ports are currently allocated and how many active translation sessions exist, which are useful software-level health indicators showing whether NAT capacity is nearing exhaustion. It depends on standard SNMPv2-SMI/TC conventions and sits within HP's broader ICF private-enterprise MIB family used across Comware feature modules rather than any special external standard. It's typically deployed on HP/H3C/HPE Comware-based switches and routers that perform NAT at a network edge, branch office, or campus aggregation point. Engineers can download the HPN-ICF-NAT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-NAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C/HPE Comware switch
HP/H3C/HPE Comware router

Monitoring Examples

The module description notes there are 'no constraints' on the MIB, and this excerpt does not include specific object or table names, but based on its stated purpose an administrator would typically poll NAT pool utilization and dynamic mapping/session tables to see how many translations are active and whether a pool is close to exhaustion. A sudden spike in session count or a pool reaching its address/port limit would signal that new outbound connections are being dropped due to NAT resource exhaustion.

What Can Be Monitored

NAT address pool utilization
static NAT mapping entries
dynamic NAT mapping entries
active NAT session count
NAT port allocation

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus

How to Use in IPNetwork Monitor

Example using hpnicfNATStatActiveTblCount OID:

Select an HP/H3C/HPE Comware switch or router (Network Address Translation) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfNATStatActiveTblCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the active PAT session count In software. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfNat	1.3.6.1.4.1.11.2.14.11.15.2.18			This MIB contains objects to manage configuration of NAT. There are no constraints on this MIB.
INT hpnicfNATBLConnectHighRate	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.3	INTEGER	read-write	The maximal connection rate(in second). If the connection rate exceed the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection rate is less than the minimal connection rate.
INT hpnicfNATBLConnectHighValue	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.1	INTEGER	read-write	The maximal connection amount. If the connection amount exceeds the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection amount is less than the minimal connection amount.
hpnicfNATBLConnectLimitPara	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2
INT hpnicfNATBLConnectLowRate	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.4	INTEGER	read-write	The minimal connection rate(in second).
INT hpnicfNATBLConnectLowValue	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.2	INTEGER	read-write	The minimal connection amount.
INT hpnicfNATBLConnectRateEnable	1.3.6.1.4.1.11.2.14.11.15.2.18.1.3.2	INTEGER	read-write	Enable or disable the connection rate control.
INT hpnicfNATBLConnectSumEnable	1.3.6.1.4.1.11.2.14.11.15.2.18.1.3.1	INTEGER	read-write	Enable or disable the connection amount control.
INT hpnicfNATBLConSpd	1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4	INTEGER	read-only	The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
I32 hpnicfNATBLConSum	1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.3	Integer32	read-only	The connection amount.
hpnicfNATBLCtrlEnable	1.3.6.1.4.1.11.2.14.11.15.2.18.1.3
INT hpnicfNATBLEnable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1.2	INTEGER	read-write	Start or stop of function of balcklist.
hpnicfNATBLEnableEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1		not-accessible	The entry of NAT blacklist Enable Table.
I32 hpnicfNATBLEnableSlotNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1.1	Integer32	not-accessible	The number of NAT board. When the function of blacklist can't be set for a NAT board, the value is 255.
hpnicfNATBLEnableTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.5		not-accessible	NAT blacklist function Enable Table. In this table, administrator can decide whether to start the function of blacklist in the NAT board. When the function of blacklist can't be set for a NAT board, the number of NAT board is 256.
IP hpnicfNATBLIpAdress	1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.1	IpAddress	not-accessible	The IP address of entry of blacklist.
INT hpnicfNATBLIPConnectHighValue	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.2	INTEGER	read-create	The maximal connection amount. It must be more than the minimal connection amount.
hpnicfNATBLIPConnectLimitParaEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1		not-accessible	The entry of the table of connection control of special IP address.
IP hpnicfNATBLIPConnectLimitParaIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.1	IpAddress	not-accessible	The special IP address. The IP is private IP address.
hpnicfNATBLIPConnectLimitParaTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6		not-accessible	The table of connection control of special IP address. In this table, administrator can decide to adopt which manner to control the connection which IP address is the special IP address.
ROW hpnicfNATBLIPConnectLimitRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.5	RowStatus	read-create	Only support 'destroy' and 'createAndGo'. If hpnicfNATBLIPConnectHighValue, hpnicfNATBLIPConnectLowValue and hpnicfNATBLIPUseSpecialConnectRate were provided correctly, its value is changed 'active'.
INT hpnicfNATBLIPConnectLowValue	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.3	INTEGER	read-create	The minimal connection amount. It must be less than the maximal connection amount.
INT hpnicfNATBLIPUseSpecialConnectRate	1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.4	INTEGER	read-create	Whether to use the special connection rate control.
hpnicfNATBLManagerEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1		not-accessible	The entry of management table of blacklist.
hpnicfNATBLManagerTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.7		not-accessible	The management table of blacklist. The table doesn't support 'getnext' operation.
INT hpnicfNATBLSlotNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.2	INTEGER	not-accessible	The number of NAT board.
INT hpnicfNATBLSpecialConnectHighRate	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.5	INTEGER	read-write	The maximal special connection rate(in second). When administrator wants to control the speed of connection, he can selects the connection speed rate or special connection rate.
INT hpnicfNATBLSpecialConnectLowRate	1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.6	INTEGER	read-write	The minimal special connection rate(in second).
hpnicfNATClearSession	1.3.6.1.4.1.11.2.14.11.15.2.18.1.1
INT hpnicfNATClearSessionSlotNo	1.3.6.1.4.1.11.2.14.11.15.2.18.1.1.1	INTEGER	read-write	The number of NAT board in which administrator wants to clear data of the session. In router, the value is 255 because no NAT board in it. This node only supports 'set' operation. The return value of 'get' operation is meaningless.
STR hpnicfNATDnsMapDomainName	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.1	DisplayString	not-accessible	Domain name.
hpnicfNATDnsMapEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1		not-accessible	The entry of hpnicfNATDnsMapTable.
IP hpnicfNATDnsMapGlobalIp	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.2	IpAddress	read-create	Global IP address.
I32 hpnicfNATDnsMapGlobalPort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.3	Integer32	read-create	Global port number.
TIK hpnicfNATDnsMapLastUseTime	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.5	TimeTicks	read-create	Its value is the time that the device uses from startup to last use 'Dns Map'record. If the value is 0,the device never use this record.
INT hpnicfNATDnsMapProtocolType	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.4	INTEGER	read-create	TCP Transmission Control Protocol. UDP User Datagram Protocol.
ROW hpnicfNATDnsMapRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.6	RowStatus	read-create	Only support 'destroy' and 'createAndGo'. If hpnicfNATDnsMapDomainName, hpnicfNATDnsMapGlobalIp and hpnicfNATDnsMapGlobalPortor hpnicfNATDnsMapDomainName, hpnicfNATDnsMapGlobalIp, hpnicfNATDnsMapGlobalPort and hpnicfNATDnsMapProtocolType were provided correctly, its value is changed 'active'.
hpnicfNATDnsMapTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.12		not-accessible	This table is used to set mapping of DNS.
I32 hpnicfNATFragmentSessionCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.11	Integer32	read-only	Active fragment packet session count.
hpnicfNATGlobalVars	1.3.6.1.4.1.11.2.14.11.15.2.18.1
I32 hpnicfNATLogCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.13	Integer32	read-only	Buffered Nat LOG table count.
hpnicfNATMibObjects	1.3.6.1.4.1.11.2.14.11.15.2.18.2
INT hpnicfNATNPAgingTime	1.3.6.1.4.1.11.2.14.11.15.2.18.1.4.1	INTEGER	read-write	There are two kinds of aging time in NP. One is fast and the other is slow. Administrator can select one or other. The defalult is fast.
hpnicfNATNPTimer	1.3.6.1.4.1.11.2.14.11.15.2.18.1.4
INT hpnicfNATOutboundAclNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.1	INTEGER	not-accessible	The number of ACL(Access Control List). When the packet accords with the rule in the ACL, its source IP address will be translated to IP address in Address pool.
hpnicfNATOutboundEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1		not-accessible	The entry of NAT out bound table.
INT hpnicfNATOutboundIsNoPat	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.3	INTEGER	read-create	Whether to use no pat manner. The translation of no pat is that the translation doesn't use the port information of packet.
INT hpnicfNATOutboundPoolIdx	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.2	INTEGER	read-create	The index of address pool in hpnicfNATPoolInfoTable. when administrator doesn't use the address pool and use the IP address of the interface as the address of global network, the value is 2147483647.
ROW hpnicfNATOutboundRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.5	RowStatus	read-create	Only support 'destroy' and 'createAndGo'. If hpnicfNATOutboundAclNo or hpnicfNATOutboundAclNo and hpnicfNATOutboundPoolIdx were provided correctly, its value is changed 'active'.
I32 hpnicfNATOutboundSlotNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.4	Integer32	read-create	The number of NAT board. In router, the value is 255 because no NAT board in it.
hpnicfNATOutboundTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.2		not-accessible	NAT out bound table: through associating ACL number, address pool with NAT board, administrator can designate which inside IP address can be translated to global IP address in the pool and the translation is processed by which NAT board.
IP hpnicfNATPoolEndIpAddr	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.3	IpAddress	read-create	The end IP address of address pool: It must be more than or equal to the start IP address.
I32 hpnicfNATPoolIdx	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.1	Integer32	not-accessible	Index of the address pool: The index uniquely indicates the address pool in the system, and its range is from 1 to 320.
hpnicfNATPoolInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1		not-accessible	The entry of NAT address pool table.
hpnicfNATPoolInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1		not-accessible	NAT address pool table : The address in the pool is the IP address in the global network. The pool can span 255 IP addresses.All address pools configured by administrator are recorded in this table.
I32 hpnicfNATPoolRefCounter	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.5	Integer32	read-create	The counter of reference. A address pool can be associated with more than one ACL and the counter of reference is recorded in this field. When the address pool is not associated with ACL, the value is 0.
ROW hpnicfNATPoolRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.6	RowStatus	read-create	Only support 'destroy' and 'createAndGo'. If hpnicfNATPoolIdx, hpnicfNATPoolStartIpAddr and hpnicfNATPoolEndIpAddr were provided correctly, its value is changed 'active'.
INT hpnicfNATPoolSlotNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.4	INTEGER	read-create	The number of NAT board to which the address pool is bound. The address translation is processed by this NAT board . The relation between address pool and slotNo is n:1. When the address pool is not bound to the NAT board,the value is 255.
IP hpnicfNATPoolStartIpAddr	1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.2	IpAddress	read-create	The start IP address of address pool: It must be less than or equal to the end IP address.
I32 hpnicfNATSequenceSessionCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.12	Integer32	read-only	Active session table count hash by private IP.
I32 hpnicfNATServerAclNumber	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.11	Integer32	read-create	Number of basic or advanced acl.
INT hpnicfNATServerEndGlobalPort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.4	INTEGER	read-create	The end global port of Inside Server. When administrator doesn't configure a series of inside server, the value is 0. If the value is not zero, the value of (GlobalPort2-GlobalPort) must be equal to (InsideIP2 - InsideIP).
IP hpnicfNATServerEndInsideIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.6	IpAddress	read-create	The end private IP address of Inside Server. When administrator doesn't configure a series of inside server, the value is 0.0.0.0.
hpnicfNATServerEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1		not-accessible	The entry of NAT inside server table.
IP hpnicfNATServerGlobalIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.2	IpAddress	not-accessible	The global IP address of Inside Server.
INT hpnicfNATServerInsidePort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.7	INTEGER	read-create	The private port of Inside Server.
INT hpnicfNATServerProType	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.1	INTEGER	not-accessible	The type of protocol: icmp(1), tcp(6), udp(17) and others.
ROW hpnicfNATServerRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.12	RowStatus	read-create	Only support 'destroy' and 'createAndGo'. If hpnicfNATServerProType, hpnicfNATServerGlobalIP, hpnicfNATServerGlobalPort and hpnicfNATServerInsideIP were provided correctly, its value is changed 'active'.
I32 hpnicfNATServerSlotNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.8	Integer32	read-create	The number of NAT board. In router, the value is 255 because no NAT board in it.
INT hpnicfNATServerStartGlobalPort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.3	INTEGER	not-accessible	The start global port of Inside Server. When the port need not be configured, the value is 0.
IP hpnicfNATServerStartInsideIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.5	IpAddress	read-create	The start private IP address of Inside Server.
hpnicfNATServerTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3		not-accessible	NAT inside Server Table. Administrator can configure server in the private network which can provide service for people in the public network. The translation map is : (InsideIP , InsidePort--> GlobalIP, GlobalPort ) (InsideIP + 1 , InsidePort--> GlobalIP, GlobalPort + 1) (InsideIP + 2 , InsidePort--> GlobalIP, GlobalPort + 2) ... ... ... (InsideIP+n(=InsideIP2),InsidePort--> GlobalIP,GlobalPort+n(=GlobalPort2))
I32 hpnicfNATServerVpnIndex	1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.10	Integer32	not-accessible	The VPN index of server.
hpnicfNATSessionEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1		not-accessible	The entry of session information table.
IP hpnicfNATSessionGlobalIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.3	IpAddress	read-only	The global IP of session.
I32 hpnicfNATSessionGlobalPort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.4	Integer32	read-only	The global port of session.
I32 hpnicfNATSessionHashNumber	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.1	Integer32	not-accessible	The row number of the hash table.
IP hpnicfNATSessionInsideIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.5	IpAddress	not-accessible	The Inside IP of session.
I32 hpnicfNATSessionInsidePort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.6	Integer32	not-accessible	The Inside port of session.
TIK hpnicfNATSessionLeftTime	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.12	TimeTicks	read-only	The Left time of session.
IP hpnicfNATSessionPeerIP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.7	IpAddress	not-accessible	The peer IP of session.
I32 hpnicfNATSessionPeerPort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.8	Integer32	not-accessible	The peer port of session.
INT hpnicfNATSessionProtocol	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.2	INTEGER	not-accessible	The protocol type of session.
I32 hpnicfNATSessionStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.11	Integer32	read-only	The status of session.
hpnicfNATSessionTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9		not-accessible	The nat session information table. There is the address translation information in the table. The sketch map of connection is pc1(private Net)------------------>NAT Device ------------------>Server(public Net) InsideIP, InsidePort---->translating to GlobalIP, GlobalPort------>PeerIP, PeerPort.
I32 hpnicfNATSessionTTL	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.10	Integer32	read-only	The TTL of session.
I32 hpnicfNATSessionVpnIndex	1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.9	Integer32	not-accessible	The VPN index of session.
C32 hpnicfNATStatActiveNatTblCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.4	Counter32	read-only	Active NO-PAT session count.
C32 hpnicfNATStatActivePoolTblCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.6	Counter32	read-only	Active address pool session count.
C32 hpnicfNATStatActiveSvrTblCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.5	Counter32	read-only	Active SERVER session count.
C32 hpnicfNATStatActiveTblCountEx	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.2	Counter32	read-only	Active PAT session count In software.
C32 hpnicfNATStatActiveTblCountInNP	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.3	Counter32	read-only	Active PAT session count In NP.
hpnicfNATStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1		not-accessible	The entry of statistics information table of NAT module.
hpnicfNATStaticConfEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1		not-accessible	Configure static Nat.
hpnicfNATStaticConfTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.10		not-accessible	Static Nat configuration table.
INT hpnicfNATStaticEnable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.11.1.2	INTEGER	read-write	Enable/disable the static Nat on the interface(hpnicfNatStaticEnableIfIndex). disable (0) enable (1)
hpnicfNATStaticEnableEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.11.1		not-accessible	Active the static Nat on interface.
hpnicfNATStaticEnableTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.11		not-accessible	Active the static Nat on interface.
IP hpnicfNATStaticGlobalIp	1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.2	IpAddress	read-create	Global Ip address.
IP hpnicfNATStaticInsideIp	1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.1	IpAddress	not-accessible	Inside ip address.
ROW hpnicfNATStaticRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.3	RowStatus	read-create	Only support 'destroy' and 'createAndGo'. If hpnicfNATStaticInsideIp and hpnicfNATStaticGlobalIp were provided correctly, its value is changed 'active'.
I32 hpnicfNATStaticSessionCount	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.10	Integer32	read-only	Active STATIC session count.
I32 hpnicfNATStatNATBoardNo	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.1	Integer32	not-accessible	The number of NAT board. In router, the value is 255 because no NAT board in it.
C32 hpnicfNATStatNumOfBadPkt	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.9	Counter32	read-only	The number of bad packet in NP.
C32 hpnicfNATStatNumOfGoodPkt	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.8	Counter32	read-only	The number of good packet in NP.
C32 hpnicfNATStatNumOfUsedPort	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.7	Counter32	read-only	The number of used port in NP.
hpnicfNATStatTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.8		not-accessible	The statistics information table of NAT module.
hpnicfNATTimeOutEntry	1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1		not-accessible	The entry of NAT Time out Table.
INT hpnicfNATTimeOutProtocol	1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1.1	INTEGER	not-accessible	The type of protocol.
hpnicfNATTimeOutTable	1.3.6.1.4.1.11.2.14.11.15.2.18.2.4		not-accessible	NAT Time out Table. When a connection is established, if there are not any actives in this connection between the time, it will be disconnected.
INT hpnicfNATTimeOutTimeValue	1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1.2	INTEGER	read-write	The time of time out.

RFC description

Manages Network Address Translation (NAT) configuration including NAT pools, outbound rules, server definitions, and NAT statistics on HP/Hewlett-Packard devices.

Start monitoring HP/H3C/HPE Comware switch or router (Network Address Translation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-NAT-MIB