All MIBs › BLADE-MIB › minus5Volt
minus5Volt
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::minus5Volt
OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.2.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: -5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal digit or blank space for a leading zero. The string 'Not Readable!' indicates that the given monitor is not supported on this system.
What is minus5Volt?
Reports the measured output of the -5V planar power rail, expressed as a signed voltage string such as '-05.02 Volts'. Unlike the positive rails, an out-of-range reading here typically points to a fault in the negative-voltage regulation circuitry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.2.1.5 snmpwalk -v2c -c public <target> BLADE-MIB::minus5Volt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.2.1.5.1 snmpget -v2c -c public <target> BLADE-MIB::minus5Volt.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> minus5Volt.1
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::minus5Volt OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2 | monitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.2 | voltage | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.2.1 | planarVolt | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.2.1.5 | minus5Volt | BLADE-MIB |