All MIBs › BLADE-MIB › snmpv1SystemAgentEnable
snmpv1SystemAgentEnable
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::snmpv1SystemAgentEnable
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Disable or enable the SNMPv1 agent.
Note: To alter any of the configuration settings for the SNMPv1 agent, the following procedure should be used: (1) This object should be set to 'disabled' (2) Make the modifications to other settings (3) This object should be set to 'enabled' (4) Restart the remote supervisor adapter if this mib is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required.
Also note that when attempting to enable this agent, the following are verifed: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname
If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled.
What is snmpv1SystemAgentEnable?
Disables or enables the management module's SNMPv1 agent. The MIB directs admins to disable it, make configuration changes, then re-enable it (and restart the module if the enabled state changed since boot); enabling also requires a valid system contact, system name, and at least one community with a valid manager address, or the agent is left disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5 snmpwalk -v2c -c public <target> BLADE-MIB::snmpv1SystemAgentEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5.1 snmpget -v2c -c public <target> BLADE-MIB::snmpv1SystemAgentEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::snmpv1SystemAgentEnable OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1 | snmpAgentConfig | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5 | snmpv1SystemAgentEnable | BLADE-MIB |