All MIBs › BLADE-MIB › ldapGroupFilter
ldapGroupFilter
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::ldapGroupFilter
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This filter is used for group authentication. It specifies what group or groups that this MM belongs to. If left blank, group authentication is disabled. Otherwise, group authentication will be performed against the filter. The filter can be a specific group name (eg. RSAWest), a wildcard (*) which matches everything, or a wildcard with a prefix (eg. RSA*). The default filter is RSA*. After user authentication, group authentication will take place, whereby an attempt will be made to match the group or groups (that the user belongs to) to the group filter defined here. If there is no match, the user will not pass authentication and will be blocked. If there is a match, the login permissions for the user will be retrieved from the matched group(s), unless the user already has login permissions assigned directly from the user record retrieved from the LDAP server.
What is ldapGroupFilter?
The group name filter used for LDAP group authentication, which can be a specific group name, a wildcard '*' matching everything, or a prefix wildcard like 'RSA*' (the default). After a user authenticates, their group memberships are checked against this filter; a match determines the user's login permissions unless the user record itself already specifies them, and no match blocks the login. Leaving this blank disables group authentication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9 snmpwalk -v2c -c public <target> BLADE-MIB::ldapGroupFilter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9.1 snmpget -v2c -c public <target> BLADE-MIB::ldapGroupFilter.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9.1 s <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::ldapGroupFilter OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6 | ldapClientCfg | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9 | ldapGroupFilter | BLADE-MIB |