All MIBs › BLADE-MIB › bootSequence1
bootSequence1
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::bootSequence1
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, and 4 be configured starting from boot sequence 1. If there is any duplication of the configured boot sequence and the current configuration, the two boot sequence will be swapped. For an example: the current boot sequence is 1=HD0, 2=CD, 3=FD, 4=HD1 If the user wants to configure 1=FD which is a duplication of 3 then the new boot sequence will be: 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped)
What is bootSequence1?
This read-write field sets the first device in the blade's boot order (options include none, floppy, CD-ROM, one of four hard drives, network boot, or not available). Note that duplicating a device already used in another boot-sequence slot causes the two slots to swap rather than create a duplicate -- for example, if the current order is HD0, CD, FD, HD1 and an admin sets slot 1 to FD (already slot 3), the result becomes FD, CD, HD0, HD1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7 snmpwalk -v2c -c public <target> BLADE-MIB::bootSequence1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7.1 snmpget -v2c -c public <target> BLADE-MIB::bootSequence1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::bootSequence1 OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.3 | bladeBootSequenceTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1 | bladeBootSequenceEntry | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7 | bootSequence1 | BLADE-MIB |