All MIBs › BLADE-MIB › critVolt
critVolt
Module: BLADE-MIB
OID (symbolic): BLADE-MIB::critVolt
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Generate a alert if any of the monitored power supply sensors in the system fall outside their specified critical operational range.
Note: If a critical voltage condition is detected, the server will automatically be shut down and powered off whether this object is enabled or not.
What is critVolt?
This read-write flag, when enabled, tells the management module to generate a critical alert whenever a monitored power-supply voltage sensor falls outside its specified critical operating range. As with critTemp, the system shuts down and powers off automatically on a critical voltage condition regardless of whether this alert is enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.2.1.2 snmpwalk -v2c -c public <target> BLADE-MIB::critVolt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.2.1.2.1 snmpget -v2c -c public <target> BLADE-MIB::critVolt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.2.1.2.1 i <value>
Start monitoring IBM BladeCenter Management Module (MM) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADE-MIB::critVolt OID value, configure state conditions and alerts, and monitor any IBM BladeCenter Management Module (MM) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.2 | remoteAlerts | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.2.1 | remoteAlertsCrit | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.2 | critVolt | BLADE-MIB |