61 modules from Brocade
Brocade's MIBs here split into two distinct lineages: native Fibre Channel SAN switches and directors (zoning, port/fabric status, MAPS alerting policies, syslog), and the FastIron/NetIron/BigIron enterprise switches and routers it inherited from its Foundry Networks acquisition (ACL, DNS/RADIUS/TACACS client config, MAC-based VLANs, IP source guard, stacking, and VSRP gateway redundancy). Recurring themes differ by lineage - SAN modules focus on fabric health and link incidents, while the FastIron modules cover AAA, access control, and Layer 2/3 redundancy on campus and data-center switches. If you're managing Brocade SAN fabric, look for the BROCADE-/BRCD-prefixed and SW-MIB modules; if you're on FastIron/NetIron switching gear, look for the FDRY-/FOUNDRY-prefixed ones instead - the two prefixes signal which product family and management model actually apply to your device.
| Module | Description |
|---|---|
| BCCUSTOM-OPR-MIB | Provides custom operator commands and chassis management for Cabletron/Enterasys network switch platforms. |
| BD-MIB | Manages Extreme Networks BlackDiamond modular chassis hardware, including line cards, fabric modules, and power supplies. |
| BRCD-DOT1X-MIB | Manages IEEE 802.1X port-based network access control configuration on Brocade network switches. |
| BRCD-FCIP-EXT-MIB | Extends FCIP (Fibre Channel over IP) tunnel management for Brocade SAN and FCIP gateway devices. |
| BROCADE-CONTEXT-MAPPING-MIB | Maps SNMP context identifiers to virtual routing instances on Brocade network devices. |
| BROCADE-ENTITY-OID-MIB | Defines entity OID registrations for Brocade hardware components and product identifiers. |
| BROCADE-FABRIC-MIB | Monitors Brocade Fibre Channel fabric topology, switch membership, and zone configuration. |
| BROCADE-MAPS-MIB | Manages MAPS (Monitoring and Alerting Policy Suite) threshold policies on Brocade SAN switches. |
| BROCADE-MCT-CLUSTER-MIB | Manages MCT (Multi-Chassis Trunking) cluster configuration and inter-chassis link status on Brocade switches. |
| BROCADE-NP-TM-STATS-MIB | Monitors network processor traffic management statistics on Brocade network forwarding hardware. |
| BROCADE-PRODUCTS-MIB | Defines product OID registration tree for the full Brocade Communications product portfolio. |
| BROCADE-QOS-MIB | Manages Quality of Service queue configuration, scheduling, and traffic statistics on Brocade switches. |
| BROCADE-ROUTEMAP-MIB | Manages route-map policy configuration and match/set clause statistics on Brocade routing devices. |
| BROCADE-SPX-MIB | Manages SPX (Simple Port eXtender) stack configuration and port extender status on Brocade switches. |
| BROCADE-SYSLOG-MIB | Manages syslog server configuration and log message severity filtering on Brocade network devices. |
| BROCADE-SYSTEM-MIB | Monitors overall system health, hardware inventory, and operational status of Brocade network devices. |
| Brocade-TC | Defines textual conventions (data types and enumerations) for use by Brocade Communications MIBs. |
| BROCADE-VCS-MIB | Manages VCS (Virtual Cluster Switching) fabric configuration and member switch status on Brocade switches. |
| FA-EXT-MIB | Allied Telesyn extended MIB providing vendor-specific management objects beyond standard MIBs for Allied Telesyn networking equipment. |
| FDRY-ACL-MIB | Foundry/Brocade FastIron MIB for Access Control List (ACL) configuration and packet filtering statistics on Foundry switches. |
| FDRY-DAI-MIB | Foundry/Brocade FastIron MIB for Dynamic ARP Inspection (DAI) configuration and trusted port settings for ARP security. |
| FDRY-DHCP-SNOOPING-MIB | Foundry/Brocade FastIron MIB for DHCP snooping configuration and binding table management for IP security on Foundry switches. |
| FDRY-DNS2-MIB | Foundry/Brocade FastIron MIB for DNS client configuration including name server addresses and domain lookup settings. |
| FDRY-IP-SOURCE-GUARD-MIB | Foundry/Brocade FastIron MIB for IP Source Guard configuration, filtering unauthorized IP traffic based on DHCP snooping bindings. |
| FDRY-IPV6-IP-MIB | Foundry/Brocade FastIron MIB for IPv6 routing configuration and statistics on FastIron switches and routers. |
| FDRY-MPLS-L2VPN-MIB | Foundry/Brocade FastIron MIB for MPLS Layer 2 VPN (L2VPN) pseudowire configuration and monitoring on Foundry routers. |
| FDRY-POE-MIB | Foundry/Brocade FastIron MIB for Power over Ethernet (PoE) port configuration and power budget monitoring on PoE-capable switches. |
| FDRY-RADIUS-MIB | Foundry/Brocade FastIron MIB for RADIUS authentication server configuration and AAA policy settings on FastIron devices. |
| FDRY-SNTP-MIB | A Foundry/Brocade FastIron MIB covering client-side configuration and synchronization status for Simple Network Time Protocol (SNTP). |
| FDRY-TACACS-MIB | Foundry/Brocade FastIron MIB for TACACS+ server configuration and access control settings on FastIron switches. |
| FDRY-TRAP-MIB | Brocade/Foundry proprietary MIB for SNMP trap receiver configuration supporting both IPv4 and IPv6 trap managers. |
| FOUNDRY-CAR-MIB | Brocade Foundry Committed Access Rate (CAR) MIB providing per-interface traffic policing configuration and statistics for rate limiting on FastIron devices. |
| FOUNDRY-IP-SOURCE-GUARD-MIB | Brocade Foundry IP source guard MIB providing per-port DHCP snooping binding and IP source validation configuration for FastIron switches. |
| FOUNDRY-LAG-MIB | Brocade Foundry Link Aggregation Group MIB providing LAG membership, LACP statistics, and trunk port management objects for FastIron switches. |
| FOUNDRY-MAC-VLAN-MIB | Brocade Foundry MAC-based VLAN MIB providing configuration objects for assigning VLAN membership based on source MAC address on FastIron switches. |
| FOUNDRY-MPLS-MIB | Brocade Foundry MPLS MIB providing label switched path configuration, LSP statistics, and MPLS forwarding table management for FastIron routers. |
| FOUNDRY-POE-MIB | Brocade Foundry Power over Ethernet MIB providing per-port PoE power budget, status, and configuration management for FastIron PoE switches. |
| FOUNDRY-SN-AGENT-MIB IPNM ✓ | Brocade/Foundry Networks agent MIB for managing and monitoring ServerIron and NetIron chassis devices, including hardware inventory, CPU/memory utilization, temperature, and system configuration. |
| FOUNDRY-SN-APPLETALK-MIB | Brocade/Foundry proprietary MIB for AppleTalk routing configuration and statistics on Foundry network devices. |
| FOUNDRY-SN-ARP-GROUP-MIB | Brocade Foundry ARP group MIB providing ARP table management, static ARP entries, and proxy ARP configuration for FastIron routing devices. |
| FOUNDRY-SN-CAM-MIB | Brocade Foundry CAM (Content Addressable Memory) MIB providing MAC address table, route table, and hardware forwarding entry management. |
| FOUNDRY-SN-IGMP-MIB | Brocade Foundry IGMP MIB providing Internet Group Management Protocol configuration, group membership, and multicast routing objects. |
| FOUNDRY-SN-IP-ACL-MIB | Brocade Foundry IP ACL MIB providing configuration and monitoring of IP access control lists for traffic filtering on FastIron switches and routers. |
| FOUNDRY-SN-IP-VRRP-MIB | Brocade Foundry IP VRRP MIB providing Virtual Router Redundancy Protocol configuration and state management for FastIron router redundancy. |
| FOUNDRY-SN-MAC-AUTHENTICATION-MIB | Brocade Foundry MAC authentication MIB providing port-based MAC address authentication configuration and session management for network access control. |
| FOUNDRY-SN-MRP-MIB | Brocade Foundry MRP (Metro Ring Protocol) MIB providing ring topology protection configuration and state objects for metro Ethernet deployments. |
| FOUNDRY-SN-NOTIFICATION-MIB | Brocade Foundry notification MIB providing SNMPv2-format trap and notification definitions for system events on FastIron network devices. |
| FOUNDRY-SN-POS-GROUP-MIB | Brocade Foundry POS (Packet over SONET) group MIB providing configuration and performance objects for SONET WAN interface modules on FastIron. |
| FOUNDRY-SN-ROOT-MIB | Root MIB for Foundry Networks (now Brocade/Ruckus) LAN switch-routers, defining top-level OIDs for products, chassis, agents, and trap registrations. |
| FOUNDRY-SN-STACKING-MIB | Brocade Foundry stacking MIB providing unit membership, stack topology, and inter-unit link management for FastIron stackable switch systems. |
| FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB | Brocade Foundry Layer 4 switch group MIB providing server load balancing, traffic distribution, and application switching management objects. |
| FOUNDRY-SN-SWITCH-GROUP-MIB | Brocade/Foundry proprietary MIB for switch group management covering VLANs, MAC tables, STP, and port configuration. |
| FOUNDRY-SN-VSRP-MIB | Brocade Foundry VSRP (Virtual Switch Redundancy Protocol) MIB providing Layer 2 and Layer 3 redundancy configuration and state management. |
| FOUNDRY-SN-WIRELESS-GROUP-MIB | Brocade Foundry wireless group MIB providing access point, SSID, and wireless client management objects for FastIron wireless LAN deployments. |
| FOUNDRY-VLAN-CAR-MIB | Brocade Foundry VLAN CAR MIB providing per-VLAN committed access rate traffic policing configuration and rate statistics on FastIron switches. |
| HA-MIB | Manages high-availability features on Brocade devices including failover state, redundancy groups, and switchover events. |
| IBM-BCCUSTOM-MIB | IBM/Brocade MIB providing custom extensions for Brocade-branded IBM SAN switch monitoring and management. |
| LINK-INCIDENT-MIB | Brocade MIB defining SNMP notifications for link-level incidents such as degraded signal, link failures, and SFP events on Brocade/Foundry equipment. |
| RESOURCE-MIB | Monitors Brocade switch resource utilization including memory, CPU, and buffer pool statistics. |
| SW-MIB | Manages Brocade Fibre Channel switch fabric, port state, zoning, and FC switch operations. |
| SYSTEM-MIB | Manages Brocade system-level objects including chassis identity, software version, and device state. |