FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB

All MIBs › FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB

Organization: Brocade Communications Systems, Inc.

Last Updated: 2010-06-02

Category: Vendor: Foundry/Brocade

Description: Brocade Foundry Layer 4 switch group MIB providing server load balancing, traffic distribution, and application switching management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB?

FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB is a Brocade (formerly Foundry Networks) enterprise MIB that manages the Layer 4 server-load-balancing (SLB) and application-switching functions on Foundry/Brocade switching platforms. It exposes global SLB configuration limits such as snL4MaxSessionLimit and snL4TcpSynLimit, along with live session/traffic counters in objects like snL4slbTotalConnections, snL4slbForwardTraffic, snL4slbReverseTraffic, snL4slbDrops, snL4slbAged, and snL4slbFinished, plus virtual-server/real-server grouping objects (snL4VirtualServer, snL4RealServer). Its principal use is software/service-level load monitoring: tracking total and dropped connections, aged (timed-out) sessions, and forward/reverse traffic volume reveals whether the load balancer is healthy and whether backend real servers are handling traffic properly, while snL4slbLimitExceeds and snL4slbDisableCount flag capacity or health-check failures affecting specific virtual/real servers. It complements standard IF-MIB interface counters by adding L4/application-layer session semantics specific to Foundry's SLB feature set. It is deployed on Brocade/Foundry ServerIron-class switches used for server load balancing in data centers, and a FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB download from Brocade is normally required to compile these SLB session and traffic objects into a monitoring platform.

IPNetwork Monitor allows you to monitor SNMP objects defined in FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Brocade/Foundry ServerIron-class Layer 4-7 switch

Monitoring Examples

An administrator would poll snL4slbTotalConnections, snL4slbForwardTraffic, and snL4slbReverseTraffic to gauge overall load-balancer traffic, while watching snL4slbDrops, snL4slbDangling, and snL4slbDisableCount per snL4RealServer entry. A rising snL4slbDrops count together with an increasing snL4slbDisableCount would indicate that one or more real servers behind a snL4VirtualServer are failing health checks or exceeding snL4MaxSessionLimit, degrading the load-balanced application's availability.

What Can Be Monitored

total SLB connections
forward/reverse traffic volume
dropped/aged/finished sessions
real server disable/health-check failures
session limit exceed events
virtual/real server configuration

Imported Objects

From FOUNDRY-SN-AGENT-MIB

DisplayString

From FOUNDRY-SN-ROOT-MIB

switch

OBJECT-IDENTITY

From FOUNDRY-SN-SWITCH-GROUP-MIB

PhysAddress

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using snL4slbTotalConnections OID:

Select a Brocade/Foundry ServerIron-class Layer 4-7 switch (server load balancing) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type snL4slbTotalConnections into the Find box to locate it in the OID tree, then select it and click OK. It reports the total connections in this device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
snL4	1.3.6.1.4.1.1991.1.1.4			Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
snL4Gen	1.3.6.1.4.1.1991.1.1.4.1
INT snL4MaxSessionLimit	1.3.6.1.4.1.1991.1.1.4.1.1	INTEGER	read-write	numbers of maximum session (L4 cache) entries
INT snL4TcpSynLimit	1.3.6.1.4.1.1991.1.1.4.1.2	INTEGER	read-write	Numbers of connection per second
INT snL4slbGlobalSDAType	1.3.6.1.4.1.1991.1.1.4.1.3	INTEGER	read-write	Global Session Distribution Algorithm(SDA)
C32 snL4slbTotalConnectionsEx	1.3.6.1.4.1.1991.1.1.4.1.4	Counter32	read-only	Total connections in this device
I32 snL4slbLimitExceeds	1.3.6.1.4.1.1991.1.1.4.1.5	Integer32	read-only	exceeds snL4TCPSynLimit (numbers of connection per second)
C32 snL4slbForwardTraffic	1.3.6.1.4.1.1991.1.1.4.1.6	Counter32	read-only	Client->Server
C32 snL4slbReverseTraffic	1.3.6.1.4.1.1991.1.1.4.1.7	Counter32	read-only	Server->Client
I32 snL4slbDrops	1.3.6.1.4.1.1991.1.1.4.1.8	Integer32	read-only
I32 snL4slbDangling	1.3.6.1.4.1.1991.1.1.4.1.9	Integer32	read-only
I32 snL4slbDisableCount	1.3.6.1.4.1.1991.1.1.4.1.10	Integer32	read-only
I32 snL4slbAged	1.3.6.1.4.1.1991.1.1.4.1.11	Integer32	read-only
I32 snL4slbFinished	1.3.6.1.4.1.1991.1.1.4.1.12	Integer32	read-only	FIN_or_RST
I32 snL4FreeSessionCount	1.3.6.1.4.1.1991.1.1.4.1.13	Integer32	read-only	Maximum sessions - used sessions
INT snL4BackupInterface	1.3.6.1.4.1.1991.1.1.4.1.14	INTEGER	read-write	backup monitoring port
PHY snL4BackupMacAddr	1.3.6.1.4.1.1991.1.1.4.1.15	PhysAddress	read-write	Associated MAC address for backup monitoring port
L4F snL4Active	1.3.6.1.4.1.1991.1.1.4.1.16	L4Flag	read-only
I32 snL4Redundancy	1.3.6.1.4.1.1991.1.1.4.1.17	Integer32	read-only
L4F snL4Backup	1.3.6.1.4.1.1991.1.1.4.1.18	L4Flag	read-only	true->StandBy,false->active
I32 snL4BecomeActive	1.3.6.1.4.1.1991.1.1.4.1.19	Integer32	read-only	How many times this device become active
I32 snL4BecomeStandBy	1.3.6.1.4.1.1991.1.1.4.1.20	Integer32	read-only	How many times this device become standby
INT snL4BackupState	1.3.6.1.4.1.1991.1.1.4.1.21	INTEGER	read-only	Backup state
I32 snL4NoPDUSent	1.3.6.1.4.1.1991.1.1.4.1.22	Integer32	read-only
I32 snL4NoPDUCount	1.3.6.1.4.1.1991.1.1.4.1.23	Integer32	read-only
I32 snL4NoPortMap	1.3.6.1.4.1.1991.1.1.4.1.24	Integer32	read-only
I32 snL4unsuccessfulConn	1.3.6.1.4.1.1991.1.1.4.1.25	Integer32	read-only	Unsuccessfull connection
INT snL4PingInterval	1.3.6.1.4.1.1991.1.1.4.1.26	INTEGER	read-write	Ping retries interval
INT snL4PingRetry	1.3.6.1.4.1.1991.1.1.4.1.27	INTEGER	read-write	Ping retries attempts
INT snL4TcpAge	1.3.6.1.4.1.1991.1.1.4.1.28	INTEGER	read-write	TCP reset age
INT snL4UdpAge	1.3.6.1.4.1.1991.1.1.4.1.29	INTEGER	read-write	UDP reset age
INT snL4EnableMaxSessionLimitReachedTrap	1.3.6.1.4.1.1991.1.1.4.1.30	INTEGER	read-write	Enable/disable maximum number of connections reached trap.
INT snL4EnableTcpSynLimitReachedTrap	1.3.6.1.4.1.1991.1.1.4.1.31	INTEGER	read-write	Enable/disable the number of TCP SYN limits reached trap.
INT snL4EnableRealServerUpTrap	1.3.6.1.4.1.1991.1.1.4.1.32	INTEGER	read-write	Enable/disable the real server up trap.
INT snL4EnableRealServerDownTrap	1.3.6.1.4.1.1991.1.1.4.1.33	INTEGER	read-write	Enable/disable the real server down trap.
INT snL4EnableRealServerPortUpTrap	1.3.6.1.4.1.1991.1.1.4.1.34	INTEGER	read-write	Enable/disable the real server TCP port up trap.
INT snL4EnableRealServerPortDownTrap	1.3.6.1.4.1.1991.1.1.4.1.35	INTEGER	read-write	Enable/disable the real server TCP port down trap.
INT snL4EnableRealServerMaxConnLimitReachedTrap	1.3.6.1.4.1.1991.1.1.4.1.36	INTEGER	read-write	Enable/disable the real server maximum number of connections reached trap.
INT snL4EnableBecomeStandbyTrap	1.3.6.1.4.1.1991.1.1.4.1.37	INTEGER	read-write	Enable/disable trap of the server load balancing switch changes state from active to standby.
INT snL4EnableBecomeActiveTrap	1.3.6.1.4.1.1991.1.1.4.1.38	INTEGER	read-write	Enable/disable trap of the server load balancing switch changes state from standby to active.
I32 snL4slbRouterInterfacePortMask	1.3.6.1.4.1.1991.1.1.4.1.39	Integer32	read-write	Router interface port mask. (It was obsoleted after release 07100, replaced by snL4slbRouterInterfacePortList)
I32 snL4MaxNumWebCacheGroup	1.3.6.1.4.1.1991.1.1.4.1.40	Integer32	read-only	The maximum number of server cache groups
I32 snL4MaxNumWebCachePerGroup	1.3.6.1.4.1.1991.1.1.4.1.41	Integer32	read-only	The maximum number of WEB Cache servers in each of web cache group
L4S snL4WebCacheStateful	1.3.6.1.4.1.1991.1.1.4.1.42	L4Status	read-write	The WEB Cache servers cache-stateful
INT snL4EnableGslbHealthCheckIpUpTrap	1.3.6.1.4.1.1991.1.1.4.1.43	INTEGER	read-write	Health check IP up.
INT snL4EnableGslbHealthCheckIpDownTrap	1.3.6.1.4.1.1991.1.1.4.1.44	INTEGER	read-write	Health check IP down.
INT snL4EnableGslbHealthCheckIpPortUpTrap	1.3.6.1.4.1.1991.1.1.4.1.45	INTEGER	read-write	Health check IP port up.
INT snL4EnableGslbHealthCheckIpPortDownTrap	1.3.6.1.4.1.1991.1.1.4.1.46	INTEGER	read-write	Health check IP port down.
INT snL4EnableGslbRemoteGslbSiDownTrap	1.3.6.1.4.1.1991.1.1.4.1.47	INTEGER	read-write	Connection to GSLB ServerIron is down.
INT snL4EnableGslbRemoteGslbSiUpTrap	1.3.6.1.4.1.1991.1.1.4.1.48	INTEGER	read-write	Connection to GSLB ServerIron is up.
INT snL4EnableGslbRemoteSiDownTrap	1.3.6.1.4.1.1991.1.1.4.1.49	INTEGER	read-write	GSLB connection to remote ServerIron is down.
INT snL4EnableGslbRemoteSiUpTrap	1.3.6.1.4.1.1991.1.1.4.1.50	INTEGER	read-write	GSLB connection to remote ServerIron is up.
OCT snL4slbRouterInterfacePortList	1.3.6.1.4.1.1991.1.1.4.1.51	OCTET STRING	read-write	Router interface port list. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
snL4VirtualServer	1.3.6.1.4.1.1991.1.1.4.2
snL4VirtualServerTable	1.3.6.1.4.1.1991.1.1.4.2.1		not-accessible	Virtual Server table.
snL4VirtualServerEntry	1.3.6.1.4.1.1991.1.1.4.2.1.1		not-accessible	An entry in L4 Virtual Server table.
INT snL4VirtualServerIndex	1.3.6.1.4.1.1991.1.1.4.2.1.1.1	INTEGER	read-only	The table index for a Virtual Server entry.
L4S snL4VirtualServerName	1.3.6.1.4.1.1991.1.1.4.2.1.1.2	L4ServerName	read-write	Virtual server name.
IP snL4VirtualServerVirtualIP	1.3.6.1.4.1.1991.1.1.4.2.1.1.3	IpAddress	read-write	Virtual Server IP Address.
L4S snL4VirtualServerAdminStatus	1.3.6.1.4.1.1991.1.1.4.2.1.1.4	L4Status	read-write	Virtual Server status is ether disabled(0) or enabled(1).
INT snL4VirtualServerSDAType	1.3.6.1.4.1.1991.1.1.4.2.1.1.5	INTEGER	read-write	TCP/UDP Sessions Distribution Algorithms Type.
L4R snL4VirtualServerRowStatus	1.3.6.1.4.1.1991.1.1.4.2.1.1.6	L4RowSts	read-write	To create or delete a virtual server entry.
L4D snL4VirtualServerDeleteState	1.3.6.1.4.1.1991.1.1.4.2.1.1.7	L4DeleteState	read-only	Delete operation state.
snL4RealServer	1.3.6.1.4.1.1991.1.1.4.3
snL4RealServerTable	1.3.6.1.4.1.1991.1.1.4.3.1		not-accessible	Real Server table.
snL4RealServerEntry	1.3.6.1.4.1.1991.1.1.4.3.1.1		not-accessible	An entry in the Real Server table.
INT snL4RealServerIndex	1.3.6.1.4.1.1991.1.1.4.3.1.1.1	INTEGER	read-only	The table index for a Real Server entry.
L4S snL4RealServerName	1.3.6.1.4.1.1991.1.1.4.3.1.1.2	L4ServerName	read-write	Real server name.
IP snL4RealServerIP	1.3.6.1.4.1.1991.1.1.4.3.1.1.3	IpAddress	read-write	Real Server IP Address.
L4S snL4RealServerAdminStatus	1.3.6.1.4.1.1991.1.1.4.3.1.1.4	L4Status	read-write	Real Server status is ether disabled(0) or enabled(1).
INT snL4RealServerMaxConnections	1.3.6.1.4.1.1991.1.1.4.3.1.1.5	INTEGER	read-write	Real Server Maximum Connection allowed.
INT snL4RealServerWeight	1.3.6.1.4.1.1991.1.1.4.3.1.1.6	INTEGER	read-write	Real Server weight
L4R snL4RealServerRowStatus	1.3.6.1.4.1.1991.1.1.4.3.1.1.7	L4RowSts	read-write	To create or delete a real server entry.
L4D snL4RealServerDeleteState	1.3.6.1.4.1.1991.1.1.4.3.1.1.8	L4DeleteState	read-only	Delete operation state.
snL4VirtualServerPort	1.3.6.1.4.1.1991.1.1.4.4
snL4VirtualServerPortTable	1.3.6.1.4.1.1991.1.1.4.4.1		not-accessible	Virtual Server Port table.
snL4VirtualServerPortEntry	1.3.6.1.4.1.1991.1.1.4.4.1.1		not-accessible	An entry in the Virtual Server Port table.
INT snL4VirtualServerPortIndex	1.3.6.1.4.1.1991.1.1.4.4.1.1.1	INTEGER	read-only	The index for Virtual Server Port entry.
L4S snL4VirtualServerPortServerName	1.3.6.1.4.1.1991.1.1.4.4.1.1.2	L4ServerName	read-write
INT snL4VirtualServerPortPort	1.3.6.1.4.1.1991.1.1.4.4.1.1.3	INTEGER	read-write
L4S snL4VirtualServerPortAdminStatus	1.3.6.1.4.1.1991.1.1.4.4.1.1.4	L4Status	read-write
INT snL4VirtualServerPortSticky	1.3.6.1.4.1.1991.1.1.4.4.1.1.5	INTEGER	read-write
INT snL4VirtualServerPortConcurrent	1.3.6.1.4.1.1991.1.1.4.4.1.1.6	INTEGER	read-write
L4R snL4VirtualServerPortRowStatus	1.3.6.1.4.1.1991.1.1.4.4.1.1.7	L4RowSts	read-write	To create or delete a virtual server port entry.
L4D snL4VirtualServerPortDeleteState	1.3.6.1.4.1.1991.1.1.4.4.1.1.8	L4DeleteState	read-only	Delete operation state.
snL4RealServerPort	1.3.6.1.4.1.1991.1.1.4.5
snL4RealServerPortTable	1.3.6.1.4.1.1991.1.1.4.5.1		not-accessible	Real Server Port table.
snL4RealServerPortEntry	1.3.6.1.4.1.1991.1.1.4.5.1.1		not-accessible	An entry in the Real Server Port table.
INT snL4RealServerPortIndex	1.3.6.1.4.1.1991.1.1.4.5.1.1.1	INTEGER	read-only	The index for Real Server Port entry.
L4S snL4RealServerPortServerName	1.3.6.1.4.1.1991.1.1.4.5.1.1.2	L4ServerName	read-write
INT snL4RealServerPortPort	1.3.6.1.4.1.1991.1.1.4.5.1.1.3	INTEGER	read-write
L4S snL4RealServerPortAdminStatus	1.3.6.1.4.1.1991.1.1.4.5.1.1.4	L4Status	read-write
L4R snL4RealServerPortRowStatus	1.3.6.1.4.1.1991.1.1.4.5.1.1.5	L4RowSts	read-write	To create or delete a Real server port entry.
L4D snL4RealServerPortDeleteState	1.3.6.1.4.1.1991.1.1.4.5.1.1.6	L4DeleteState	read-only	Delete operation state.
snL4Bind	1.3.6.1.4.1.1991.1.1.4.6
snL4BindTable	1.3.6.1.4.1.1991.1.1.4.6.1		not-accessible	Bind table.
snL4BindEntry	1.3.6.1.4.1.1991.1.1.4.6.1.1		not-accessible	An entry in the Bind table.
INT snL4BindIndex	1.3.6.1.4.1.1991.1.1.4.6.1.1.1	INTEGER	read-only	The index for Bind entry.
L4S snL4BindVirtualServerName	1.3.6.1.4.1.1991.1.1.4.6.1.1.2	L4ServerName	read-write
INT snL4BindVirtualPortNumber	1.3.6.1.4.1.1991.1.1.4.6.1.1.3	INTEGER	read-write
L4S snL4BindRealServerName	1.3.6.1.4.1.1991.1.1.4.6.1.1.4	L4ServerName	read-write
INT snL4BindRealPortNumber	1.3.6.1.4.1.1991.1.1.4.6.1.1.5	INTEGER	read-write
INT snL4BindRowStatus	1.3.6.1.4.1.1991.1.1.4.6.1.1.6	INTEGER	read-write	To create or delete bind entry.
snL4VirtualServerStatus	1.3.6.1.4.1.1991.1.1.4.7
snL4VirtualServerStatusTable	1.3.6.1.4.1.1991.1.1.4.7.1		not-accessible	Virtual Server Status table.
snL4VirtualServerStatusEntry	1.3.6.1.4.1.1991.1.1.4.7.1.1		not-accessible	An entry in L4 Virtual Server Status table.
INT snL4VirtualServerStatusIndex	1.3.6.1.4.1.1991.1.1.4.7.1.1.1	INTEGER	read-only	The table index for a Virtual Server Status entry.
L4S snL4VirtualServerStatusName	1.3.6.1.4.1.1991.1.1.4.7.1.1.2	L4ServerName	read-only	Virtual server name.
C32 snL4VirtualServerStatusReceivePkts	1.3.6.1.4.1.1991.1.1.4.7.1.1.3	Counter32	read-only
C32 snL4VirtualServerStatusTransmitPkts	1.3.6.1.4.1.1991.1.1.4.7.1.1.4	Counter32	read-only
C32 snL4VirtualServerStatusTotalConnections	1.3.6.1.4.1.1991.1.1.4.7.1.1.5	Counter32	read-only
snL4RealServerStatus	1.3.6.1.4.1.1991.1.1.4.8
snL4RealServerStatusTable	1.3.6.1.4.1.1991.1.1.4.8.1		not-accessible	Real Server Status table.
snL4RealServerStatusEntry	1.3.6.1.4.1.1991.1.1.4.8.1.1		not-accessible	An entry in the Real Server Status table.
INT snL4RealServerStatusIndex	1.3.6.1.4.1.1991.1.1.4.8.1.1.1	INTEGER	read-only	The table index for a Real Server Status entry.
L4S snL4RealServerStatusName	1.3.6.1.4.1.1991.1.1.4.8.1.1.2	L4ServerName	read-only
IP snL4RealServerStatusRealIP	1.3.6.1.4.1.1991.1.1.4.8.1.1.3	IpAddress	read-only
C32 snL4RealServerStatusReceivePkts	1.3.6.1.4.1.1991.1.1.4.8.1.1.4	Counter32	read-only
C32 snL4RealServerStatusTransmitPkts	1.3.6.1.4.1.1991.1.1.4.8.1.1.5	Counter32	read-only
I32 snL4RealServerStatusCurConnections	1.3.6.1.4.1.1991.1.1.4.8.1.1.6	Integer32	read-only
C32 snL4RealServerStatusTotalConnections	1.3.6.1.4.1.1991.1.1.4.8.1.1.7	Counter32	read-only
I32 snL4RealServerStatusAge	1.3.6.1.4.1.1991.1.1.4.8.1.1.8	Integer32	read-only
INT snL4RealServerStatusState	1.3.6.1.4.1.1991.1.1.4.8.1.1.9	INTEGER	read-only
I32 snL4RealServerStatusReassignments	1.3.6.1.4.1.1991.1.1.4.8.1.1.10	Integer32	read-only
I32 snL4RealServerStatusReassignmentLimit	1.3.6.1.4.1.1991.1.1.4.8.1.1.11	Integer32	read-only
I32 snL4RealServerStatusFailedPortExists	1.3.6.1.4.1.1991.1.1.4.8.1.1.12	Integer32	read-only
I32 snL4RealServerStatusFailTime	1.3.6.1.4.1.1991.1.1.4.8.1.1.13	Integer32	read-only
I32 snL4RealServerStatusPeakConnections	1.3.6.1.4.1.1991.1.1.4.8.1.1.14	Integer32	read-only
snL4VirtualServerPortStatus	1.3.6.1.4.1.1991.1.1.4.9
snL4VirtualServerPortStatusTable	1.3.6.1.4.1.1991.1.1.4.9.1		not-accessible	Virtual Server Port Status table.
snL4VirtualServerPortStatusEntry	1.3.6.1.4.1.1991.1.1.4.9.1.1		not-accessible	An entry in the Virtual Server Port Status table.
I32 snL4VirtualServerPortStatusIndex	1.3.6.1.4.1.1991.1.1.4.9.1.1.1	Integer32	read-only	The index for Virtual Server Port Status entry.
INT snL4VirtualServerPortStatusPort	1.3.6.1.4.1.1991.1.1.4.9.1.1.2	INTEGER	read-only
L4S snL4VirtualServerPortStatusServerName	1.3.6.1.4.1.1991.1.1.4.9.1.1.3	L4ServerName	read-only
I32 snL4VirtualServerPortStatusCurrentConnection	1.3.6.1.4.1.1991.1.1.4.9.1.1.4	Integer32	read-only
C32 snL4VirtualServerPortStatusTotalConnection	1.3.6.1.4.1.1991.1.1.4.9.1.1.5	Counter32	read-only
I32 snL4VirtualServerPortStatusPeakConnection	1.3.6.1.4.1.1991.1.1.4.9.1.1.6	Integer32	read-only
snL4RealServerPortStatus	1.3.6.1.4.1.1991.1.1.4.10
snL4RealServerPortStatusTable	1.3.6.1.4.1.1991.1.1.4.10.1		not-accessible	Real Server Port Status table.
snL4RealServerPortStatusEntry	1.3.6.1.4.1.1991.1.1.4.10.1.1		not-accessible	An entry in the Real Server Port Status table.
INT snL4RealServerPortStatusIndex	1.3.6.1.4.1.1991.1.1.4.10.1.1.1	INTEGER	read-only	The index for Real Server Port Status entry.
I32 snL4RealServerPortStatusPort	1.3.6.1.4.1.1991.1.1.4.10.1.1.2	Integer32	read-only
L4S snL4RealServerPortStatusServerName	1.3.6.1.4.1.1991.1.1.4.10.1.1.3	L4ServerName	read-only
I32 snL4RealServerPortStatusReassignCount	1.3.6.1.4.1.1991.1.1.4.10.1.1.4	Integer32	read-only
INT snL4RealServerPortStatusState	1.3.6.1.4.1.1991.1.1.4.10.1.1.5	INTEGER	read-only	Real server port state
I32 snL4RealServerPortStatusFailTime	1.3.6.1.4.1.1991.1.1.4.10.1.1.6	Integer32	read-only	Only useful, if real server port state is failed. Indicating how seconds has been elapsed from the last retry.
I32 snL4RealServerPortStatusCurrentConnection	1.3.6.1.4.1.1991.1.1.4.10.1.1.7	Integer32	read-only	Real server port current connection
C32 snL4RealServerPortStatusTotalConnection	1.3.6.1.4.1.1991.1.1.4.10.1.1.8	Counter32	read-only	Real server port total connection
C32 snL4RealServerPortStatusRxPkts	1.3.6.1.4.1.1991.1.1.4.10.1.1.9	Counter32	read-only	Real server port receive packets.
C32 snL4RealServerPortStatusTxPkts	1.3.6.1.4.1.1991.1.1.4.10.1.1.10	Counter32	read-only	Real server port transmit packets.
C32 snL4RealServerPortStatusRxBytes	1.3.6.1.4.1.1991.1.1.4.10.1.1.11	Counter32	read-only	Real server port receive bytes.
C32 snL4RealServerPortStatusTxBytes	1.3.6.1.4.1.1991.1.1.4.10.1.1.12	Counter32	read-only	Real server port transmit bytes.
I32 snL4RealServerPortStatusPeakConnection	1.3.6.1.4.1.1991.1.1.4.10.1.1.13	Integer32	read-only	peak connection for real server port.
snL4Policy	1.3.6.1.4.1.1991.1.1.4.11
snL4PolicyTable	1.3.6.1.4.1.1991.1.1.4.11.1		not-accessible	L4 policy table.
snL4PolicyEntry	1.3.6.1.4.1.1991.1.1.4.11.1.1		not-accessible	An entry of the L4 policy table.
INT snL4PolicyId	1.3.6.1.4.1.1991.1.1.4.11.1.1.1	INTEGER	read-only	The ID to identify a entry.
INT snL4PolicyPriority	1.3.6.1.4.1.1991.1.1.4.11.1.1.2	INTEGER	read-write	The Stand alone stackable switch L4 Policy Priority values are: normal(0) -- normal prority high(1) -- high prority cache(2) -- prority for cache transparent(3) -- prority for transparent The BigIron switch L4 Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
INT snL4PolicyScope	1.3.6.1.4.1.1991.1.1.4.11.1.1.3	INTEGER	read-write	Scope of the local or global. Global automatic apply to all port. Local apply to a port.
INT snL4PolicyProtocol	1.3.6.1.4.1.1991.1.1.4.11.1.1.4	INTEGER	read-write
INT snL4PolicyPort	1.3.6.1.4.1.1991.1.1.4.11.1.1.5	INTEGER	read-write
INT snL4PolicyRowStatus	1.3.6.1.4.1.1991.1.1.4.11.1.1.6	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid
snL4PolicyPortAccess	1.3.6.1.4.1.1991.1.1.4.12
snL4PolicyPortAccessTable	1.3.6.1.4.1.1991.1.1.4.12.1		not-accessible	ip interface L4 policy access table.
snL4PolicyPortAccessEntry	1.3.6.1.4.1.1991.1.1.4.12.1.1		not-accessible	An entry of the ip interface L4 policy access table.
I32 snL4PolicyPortAccessPort	1.3.6.1.4.1.1991.1.1.4.12.1.1.1	Integer32	read-only	The ip interface to which the L4 policy applies.
OCT snL4PolicyPortAccessList	1.3.6.1.4.1.1991.1.1.4.12.1.1.2	OCTET STRING	read-write	An ip L4 policy list, of which each octet contains a ID number that forms a group of s. A valid entry in the snL4PolicyTable with the corresponding ID number (i.e. snL4PolicyId) must have been created before a list is initialized.
INT snL4PolicyPortAccessRowStatus	1.3.6.1.4.1.1991.1.1.4.12.1.1.3	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid
snL4Trap	1.3.6.1.4.1.1991.1.1.4.13
IP snL4TrapRealServerIP	1.3.6.1.4.1.1991.1.1.4.13.1	IpAddress	read-only	Real server IP address.
L4S snL4TrapRealServerName	1.3.6.1.4.1.1991.1.1.4.13.2	L4ServerName	read-only	Real server name.
I32 snL4TrapRealServerPort	1.3.6.1.4.1.1991.1.1.4.13.3	Integer32	read-only	Transport protocol port number of the real server.
I32 snL4TrapRealServerCurConnections	1.3.6.1.4.1.1991.1.1.4.13.4	Integer32	read-only	Real Server current connections.
L4S snL4TrapLinkName	1.3.6.1.4.1.1991.1.1.4.13.5	L4ServerName	read-only	Link name.
I32 snL4LinkVirtualInterface	1.3.6.1.4.1.1991.1.1.4.13.6	Integer32	read-only	Link virtual interface.
snL4WebCache	1.3.6.1.4.1.1991.1.1.4.14
snL4WebCacheTable	1.3.6.1.4.1.1991.1.1.4.14.1		not-accessible	Real Server table.
snL4WebCacheEntry	1.3.6.1.4.1.1991.1.1.4.14.1.1		not-accessible	An entry in the Real Server table.
IP snL4WebCacheIP	1.3.6.1.4.1.1991.1.1.4.14.1.1.1	IpAddress	read-only	Real Server IP Address.
L4S snL4WebCacheName	1.3.6.1.4.1.1991.1.1.4.14.1.1.2	L4ServerName	read-write	Real server name.
L4S snL4WebCacheAdminStatus	1.3.6.1.4.1.1991.1.1.4.14.1.1.3	L4Status	read-write	Real Server status is ether disabled(0) or enabled(1).
INT snL4WebCacheMaxConnections	1.3.6.1.4.1.1991.1.1.4.14.1.1.4	INTEGER	read-write	Real Server Maximum Connection allowed.
INT snL4WebCacheWeight	1.3.6.1.4.1.1991.1.1.4.14.1.1.5	INTEGER	read-write	Real Server weight
L4R snL4WebCacheRowStatus	1.3.6.1.4.1.1991.1.1.4.14.1.1.6	L4RowSts	read-write	To create or delete a real server entry.
L4D snL4WebCacheDeleteState	1.3.6.1.4.1.1991.1.1.4.14.1.1.7	L4DeleteState	read-only	Delete operation state.
snL4WebCacheGroup	1.3.6.1.4.1.1991.1.1.4.15
snL4WebCacheGroupTable	1.3.6.1.4.1.1991.1.1.4.15.1		not-accessible	Web Cache Group table.
snL4WebCacheGroupEntry	1.3.6.1.4.1.1991.1.1.4.15.1.1		not-accessible	An entry in the Web Cache Group table.
I32 snL4WebCacheGroupId	1.3.6.1.4.1.1991.1.1.4.15.1.1.1	Integer32	read-only	The identification for a Web Cache Group entry. The limit is from 1 to snL4MaxNumWebCacheGroup.
L4S snL4WebCacheGroupName	1.3.6.1.4.1.1991.1.1.4.15.1.1.2	L4ServerName	read-write	Web Cache Group name.
OCT snL4WebCacheGroupWebCacheIpList	1.3.6.1.4.1.1991.1.1.4.15.1.1.3	OCTET STRING	read-write	A list of the Server Cache Group Real Server IP Address. The number of IP Address is from 1 (4 OCTETs) to the snL4MaxNumServersPerWebCacheGroup, maximum number of server IP Address allowed in the list.
IP snL4WebCacheGroupDestMask	1.3.6.1.4.1.1991.1.1.4.15.1.1.4	IpAddress	read-write	Cache Server Group Destination Mask.
IP snL4WebCacheGroupSrcMask	1.3.6.1.4.1.1991.1.1.4.15.1.1.5	IpAddress	read-write	Cache Server Group Source Mask.
INT snL4WebCacheGroupAdminStatus	1.3.6.1.4.1.1991.1.1.4.15.1.1.6	INTEGER	read-write	The WEB Cache Group is set either enabled(1)...........activated. disabled(0)..........disabled.
L4R snL4WebCacheGroupRowStatus	1.3.6.1.4.1.1991.1.1.4.15.1.1.7	L4RowSts	read-write	To create or delete a Web Cache Group entry.
snL4WebCacheTrafficStats	1.3.6.1.4.1.1991.1.1.4.16
snL4WebCacheTrafficStatsTable	1.3.6.1.4.1.1991.1.1.4.16.1		not-accessible	Web Cache Traffic Statistics table.
snL4WebCacheTrafficStatsEntry	1.3.6.1.4.1.1991.1.1.4.16.1.1		not-accessible	An entry in the Web Cache Traffic Statistics table.
IP snL4WebCacheTrafficIp	1.3.6.1.4.1.1991.1.1.4.16.1.1.1	IpAddress	read-only	Cache Server IP Address.
INT snL4WebCacheTrafficPort	1.3.6.1.4.1.1991.1.1.4.16.1.1.2	INTEGER	read-only	The WEB Cache port is one of the protocol port such as UDP, TCP etc.
I32 snL4WebCacheCurrConnections	1.3.6.1.4.1.1991.1.1.4.16.1.1.3	Integer32	read-only	Number of the current connections in WEB Cache group.
I32 snL4WebCacheTotalConnections	1.3.6.1.4.1.1991.1.1.4.16.1.1.4	Integer32	read-only	The total connections in WEB Cache group.
C32 snL4WebCacheTxPkts	1.3.6.1.4.1.1991.1.1.4.16.1.1.5	Counter32	read-only	Number of the Packets sending from Client/Web-Server to Cache Server
C32 snL4WebCacheRxPkts	1.3.6.1.4.1.1991.1.1.4.16.1.1.6	Counter32	read-only	Number of the Packets sending from Cache Server to Client/Web-Server
C32 snL4WebCacheTxOctets	1.3.6.1.4.1.1991.1.1.4.16.1.1.7	Counter32	read-only	Number of the Octets sending from Client/Web-Server to Cache Server
C32 snL4WebCacheRxOctets	1.3.6.1.4.1.1991.1.1.4.16.1.1.8	Counter32	read-only	Number of the Octets sending from Cache Server to Client/Web-Server
WEB snL4WebCachePortState	1.3.6.1.4.1.1991.1.1.4.16.1.1.9	WebCacheState	read-only	Web Cache Port state.
snL4WebUncachedTrafficStats	1.3.6.1.4.1.1991.1.1.4.17
snL4WebUncachedTrafficStatsTable	1.3.6.1.4.1.1991.1.1.4.17.1		not-accessible	Web Uncached Traffic Statistics table.
snL4WebUncachedTrafficStatsEntry	1.3.6.1.4.1.1991.1.1.4.17.1.1		not-accessible	An entry in the Web Uncached Traffic Statistics table.
I32 snL4WebServerPort	1.3.6.1.4.1.1991.1.1.4.17.1.1.1	Integer32	read-only	Web Server Port.
I32 snL4WebClientPort	1.3.6.1.4.1.1991.1.1.4.17.1.1.2	Integer32	read-only	Web Client Port.
C32 snL4WebUncachedTxPkts	1.3.6.1.4.1.1991.1.1.4.17.1.1.3	Counter32	read-only	Number of the Packets sending from Client port to Web Server port
C32 snL4WebUncachedRxPkts	1.3.6.1.4.1.1991.1.1.4.17.1.1.4	Counter32	read-only	Number of the Packets sending from Web Server port to Client port
C32 snL4WebUncachedTxOctets	1.3.6.1.4.1.1991.1.1.4.17.1.1.5	Counter32	read-only	Number of the Octets sending from Client port to Web Server port
C32 snL4WebUncachedRxOctets	1.3.6.1.4.1.1991.1.1.4.17.1.1.6	Counter32	read-only	Number of the Octets sending from Web Server port to Client port
STR snL4WebServerPortName	1.3.6.1.4.1.1991.1.1.4.17.1.1.7	DisplayString	read-only	Web Server Port Name string.
STR snL4WebClientPortName	1.3.6.1.4.1.1991.1.1.4.17.1.1.8	DisplayString	read-only	Web Client Port Name string.
snL4WebCachePort	1.3.6.1.4.1.1991.1.1.4.18
snL4WebCachePortTable	1.3.6.1.4.1.1991.1.1.4.18.1		not-accessible	Real Server Port table.
snL4WebCachePortEntry	1.3.6.1.4.1.1991.1.1.4.18.1.1		not-accessible	An entry in the Real Server Port table.
IP snL4WebCachePortServerIp	1.3.6.1.4.1.1991.1.1.4.18.1.1.1	IpAddress	read-only	Cache Server IP Address.
INT snL4WebCachePortPort	1.3.6.1.4.1.1991.1.1.4.18.1.1.2	INTEGER	read-only	The WEB Cache port is one of the protocol port such as UDP, TCP etc.
L4S snL4WebCachePortAdminStatus	1.3.6.1.4.1.1991.1.1.4.18.1.1.3	L4Status	read-write
L4R snL4WebCachePortRowStatus	1.3.6.1.4.1.1991.1.1.4.18.1.1.4	L4RowSts	read-write	To create or delete a Real server port entry.
L4D snL4WebCachePortDeleteState	1.3.6.1.4.1.1991.1.1.4.18.1.1.5	L4DeleteState	read-only	Delete operation state.
snL4RealServerCfg	1.3.6.1.4.1.1991.1.1.4.19
snL4RealServerCfgTable	1.3.6.1.4.1.1991.1.1.4.19.1		not-accessible	Real Server table.
snL4RealServerCfgEntry	1.3.6.1.4.1.1991.1.1.4.19.1.1		not-accessible	An entry in the Real Server table.
IP snL4RealServerCfgIP	1.3.6.1.4.1.1991.1.1.4.19.1.1.1	IpAddress	read-only	Real Server IP Address.
L4S snL4RealServerCfgName	1.3.6.1.4.1.1991.1.1.4.19.1.1.2	L4ServerName	read-write	Real server name.
L4S snL4RealServerCfgAdminStatus	1.3.6.1.4.1.1991.1.1.4.19.1.1.3	L4Status	read-write	Real Server status is ether disabled(0) or enabled(1).
I32 snL4RealServerCfgMaxConnections	1.3.6.1.4.1.1991.1.1.4.19.1.1.4	Integer32	read-write	Real Server Maximum Connection allowed.
I32 snL4RealServerCfgWeight	1.3.6.1.4.1.1991.1.1.4.19.1.1.5	Integer32	read-write	Real Server weight
L4R snL4RealServerCfgRowStatus	1.3.6.1.4.1.1991.1.1.4.19.1.1.6	L4RowSts	read-write	To create or delete a real server entry.
L4D snL4RealServerCfgDeleteState	1.3.6.1.4.1.1991.1.1.4.19.1.1.7	L4DeleteState	read-only	Delete operation state.
snL4RealServerPortCfg	1.3.6.1.4.1.1991.1.1.4.20
snL4RealServerPortCfgTable	1.3.6.1.4.1.1991.1.1.4.20.1		not-accessible	Real Server Port table.
snL4RealServerPortCfgEntry	1.3.6.1.4.1.1991.1.1.4.20.1.1		not-accessible	An entry in the Real Server Port table.
IP snL4RealServerPortCfgIP	1.3.6.1.4.1.1991.1.1.4.20.1.1.1	IpAddress	read-only	The IP address for the Real Server .
L4S snL4RealServerPortCfgServerName	1.3.6.1.4.1.1991.1.1.4.20.1.1.2	L4ServerName	read-only
I32 snL4RealServerPortCfgPort	1.3.6.1.4.1.1991.1.1.4.20.1.1.3	Integer32	read-only
L4S snL4RealServerPortCfgAdminStatus	1.3.6.1.4.1.1991.1.1.4.20.1.1.4	L4Status	read-write
L4R snL4RealServerPortCfgRowStatus	1.3.6.1.4.1.1991.1.1.4.20.1.1.5	L4RowSts	read-write	To create or delete a Real server port entry.
L4D snL4RealServerPortCfgDeleteState	1.3.6.1.4.1.1991.1.1.4.20.1.1.6	L4DeleteState	read-only	Delete operation state.
snL4VirtualServerCfg	1.3.6.1.4.1.1991.1.1.4.21
snL4VirtualServerCfgTable	1.3.6.1.4.1.1991.1.1.4.21.1		not-accessible	Virtual Server table.
snL4VirtualServerCfgEntry	1.3.6.1.4.1.1991.1.1.4.21.1.1		not-accessible	An entry in L4 Virtual Server table.
IP snL4VirtualServerCfgVirtualIP	1.3.6.1.4.1.1991.1.1.4.21.1.1.1	IpAddress	read-only	Virtual Server IP Address.
L4S snL4VirtualServerCfgName	1.3.6.1.4.1.1991.1.1.4.21.1.1.2	L4ServerName	read-write	Virtual server name.
L4S snL4VirtualServerCfgAdminStatus	1.3.6.1.4.1.1991.1.1.4.21.1.1.3	L4Status	read-write	Virtual Server status is ether disabled(0) or enabled(1).
INT snL4VirtualServerCfgSDAType	1.3.6.1.4.1.1991.1.1.4.21.1.1.4	INTEGER	read-write	TCP/UDP Sessions Distribution Algorithms Type.
L4R snL4VirtualServerCfgRowStatus	1.3.6.1.4.1.1991.1.1.4.21.1.1.5	L4RowSts	read-write	To create or delete a virtual server entry.
L4D snL4VirtualServerCfgDeleteState	1.3.6.1.4.1.1991.1.1.4.21.1.1.6	L4DeleteState	read-only	Delete operation state.
snL4VirtualServerPortCfg	1.3.6.1.4.1.1991.1.1.4.22
snL4VirtualServerPortCfgTable	1.3.6.1.4.1.1991.1.1.4.22.1		not-accessible	Virtual Server Port table.
snL4VirtualServerPortCfgEntry	1.3.6.1.4.1.1991.1.1.4.22.1.1		not-accessible	An entry in the Virtual Server Port table.
IP snL4VirtualServerPortCfgIP	1.3.6.1.4.1.1991.1.1.4.22.1.1.1	IpAddress	read-only	Virtual Server IP Address.
I32 snL4VirtualServerPortCfgPort	1.3.6.1.4.1.1991.1.1.4.22.1.1.2	Integer32	read-only
L4S snL4VirtualServerPortCfgServerName	1.3.6.1.4.1.1991.1.1.4.22.1.1.3	L4ServerName	read-only
L4S snL4VirtualServerPortCfgAdminStatus	1.3.6.1.4.1.1991.1.1.4.22.1.1.4	L4Status	read-write
INT snL4VirtualServerPortCfgSticky	1.3.6.1.4.1.1991.1.1.4.22.1.1.5	INTEGER	read-write
INT snL4VirtualServerPortCfgConcurrent	1.3.6.1.4.1.1991.1.1.4.22.1.1.6	INTEGER	read-write
L4R snL4VirtualServerPortCfgRowStatus	1.3.6.1.4.1.1991.1.1.4.22.1.1.7	L4RowSts	read-write	To create or delete a virtual server port entry.
L4D snL4VirtualServerPortCfgDeleteState	1.3.6.1.4.1.1991.1.1.4.22.1.1.8	L4DeleteState	read-only	Delete operation state.
snL4RealServerStatistic	1.3.6.1.4.1.1991.1.1.4.23
snL4RealServerStatisticTable	1.3.6.1.4.1.1991.1.1.4.23.1		not-accessible	Real Server Statistic table.
snL4RealServerStatisticEntry	1.3.6.1.4.1.1991.1.1.4.23.1.1		not-accessible	An entry in the Real Server Statistic table.
IP snL4RealServerStatisticRealIP	1.3.6.1.4.1.1991.1.1.4.23.1.1.1	IpAddress	read-only
L4S snL4RealServerStatisticName	1.3.6.1.4.1.1991.1.1.4.23.1.1.2	L4ServerName	read-only
C32 snL4RealServerStatisticReceivePkts	1.3.6.1.4.1.1991.1.1.4.23.1.1.3	Counter32	read-only
C32 snL4RealServerStatisticTransmitPkts	1.3.6.1.4.1.1991.1.1.4.23.1.1.4	Counter32	read-only
I32 snL4RealServerStatisticCurConnections	1.3.6.1.4.1.1991.1.1.4.23.1.1.5	Integer32	read-only
C32 snL4RealServerStatisticTotalConnections	1.3.6.1.4.1.1991.1.1.4.23.1.1.6	Counter32	read-only
I32 snL4RealServerStatisticAge	1.3.6.1.4.1.1991.1.1.4.23.1.1.7	Integer32	read-only
INT snL4RealServerStatisticState	1.3.6.1.4.1.1991.1.1.4.23.1.1.8	INTEGER	read-only
I32 snL4RealServerStatisticReassignments	1.3.6.1.4.1.1991.1.1.4.23.1.1.9	Integer32	read-only
I32 snL4RealServerStatisticReassignmentLimit	1.3.6.1.4.1.1991.1.1.4.23.1.1.10	Integer32	read-only
I32 snL4RealServerStatisticFailedPortExists	1.3.6.1.4.1.1991.1.1.4.23.1.1.11	Integer32	read-only
I32 snL4RealServerStatisticFailTime	1.3.6.1.4.1.1991.1.1.4.23.1.1.12	Integer32	read-only
I32 snL4RealServerStatisticPeakConnections	1.3.6.1.4.1.1991.1.1.4.23.1.1.13	Integer32	read-only
snL4RealServerPortStatistic	1.3.6.1.4.1.1991.1.1.4.24
snL4RealServerPortStatisticTable	1.3.6.1.4.1.1991.1.1.4.24.1		not-accessible	Real Server Port Statistic table.
snL4RealServerPortStatisticEntry	1.3.6.1.4.1.1991.1.1.4.24.1.1		not-accessible	An entry in the Real Server Port Statistic table.
IP snL4RealServerPortStatisticIP	1.3.6.1.4.1.1991.1.1.4.24.1.1.1	IpAddress	read-only	The index for Real Server Port Statistic entry.
I32 snL4RealServerPortStatisticPort	1.3.6.1.4.1.1991.1.1.4.24.1.1.2	Integer32	read-only
L4S snL4RealServerPortStatisticServerName	1.3.6.1.4.1.1991.1.1.4.24.1.1.3	L4ServerName	read-only
I32 snL4RealServerPortStatisticReassignCount	1.3.6.1.4.1.1991.1.1.4.24.1.1.4	Integer32	read-only
INT snL4RealServerPortStatisticState	1.3.6.1.4.1.1991.1.1.4.24.1.1.5	INTEGER	read-only	Real server port state
I32 snL4RealServerPortStatisticFailTime	1.3.6.1.4.1.1991.1.1.4.24.1.1.6	Integer32	read-only	Only useful, if real server port state is failed. Indicating how seconds has been elapsed from the last retry.
I32 snL4RealServerPortStatisticCurrentConnection	1.3.6.1.4.1.1991.1.1.4.24.1.1.7	Integer32	read-only	Real server port current connection
C32 snL4RealServerPortStatisticTotalConnection	1.3.6.1.4.1.1991.1.1.4.24.1.1.8	Counter32	read-only	Real server port total connection
C32 snL4RealServerPortStatisticRxPkts	1.3.6.1.4.1.1991.1.1.4.24.1.1.9	Counter32	read-only	Real server port receive packets.
C32 snL4RealServerPortStatisticTxPkts	1.3.6.1.4.1.1991.1.1.4.24.1.1.10	Counter32	read-only	Real server port transmit packets.
C32 snL4RealServerPortStatisticRxBytes	1.3.6.1.4.1.1991.1.1.4.24.1.1.11	Counter32	read-only	Real server port receive bytes.
C32 snL4RealServerPortStatisticTxBytes	1.3.6.1.4.1.1991.1.1.4.24.1.1.12	Counter32	read-only	Real server port transmit bytes.
I32 snL4RealServerPortStatisticPeakConnection	1.3.6.1.4.1.1991.1.1.4.24.1.1.13	Integer32	read-only	peak connection for real server port.
snL4VirtualServerStatistic	1.3.6.1.4.1.1991.1.1.4.25
snL4VirtualServerStatisticTable	1.3.6.1.4.1.1991.1.1.4.25.1		not-accessible	Virtual Server Statistic table.
snL4VirtualServerStatisticEntry	1.3.6.1.4.1.1991.1.1.4.25.1.1		not-accessible	An entry in L4 Virtual Server Statistic table.
IP snL4VirtualServerStatisticIP	1.3.6.1.4.1.1991.1.1.4.25.1.1.1	IpAddress	read-only	The table index for a Virtual Server Statistic entry.
L4S snL4VirtualServerStatisticName	1.3.6.1.4.1.1991.1.1.4.25.1.1.2	L4ServerName	read-only	Virtual server name.
C32 snL4VirtualServerStatisticReceivePkts	1.3.6.1.4.1.1991.1.1.4.25.1.1.3	Counter32	read-only
C32 snL4VirtualServerStatisticTransmitPkts	1.3.6.1.4.1.1991.1.1.4.25.1.1.4	Counter32	read-only
C32 snL4VirtualServerStatisticTotalConnections	1.3.6.1.4.1.1991.1.1.4.25.1.1.5	Counter32	read-only
C64 snL4VirtualServerStatisticReceiveBytes	1.3.6.1.4.1.1991.1.1.4.25.1.1.6	Counter64	read-only
C64 snL4VirtualServerStatisticTransmitBytes	1.3.6.1.4.1.1991.1.1.4.25.1.1.7	Counter64	read-only
I32 snL4VirtualServerStatisticSymmetricState	1.3.6.1.4.1.1991.1.1.4.25.1.1.8	Integer32	read-only
I32 snL4VirtualServerStatisticSymmetricPriority	1.3.6.1.4.1.1991.1.1.4.25.1.1.9	Integer32	read-only
I32 snL4VirtualServerStatisticSymmetricKeep	1.3.6.1.4.1.1991.1.1.4.25.1.1.10	Integer32	read-only
C32 snL4VirtualServerStatisticSymmetricActivates	1.3.6.1.4.1.1991.1.1.4.25.1.1.11	Counter32	read-only
C32 snL4VirtualServerStatisticSymmetricInactives	1.3.6.1.4.1.1991.1.1.4.25.1.1.12	Counter32	read-only
PHY snL4VirtualServerStatisticSymmetricBestStandbyMacAddr	1.3.6.1.4.1.1991.1.1.4.25.1.1.13	PhysAddress	read-only
PHY snL4VirtualServerStatisticSymmetricActiveMacAddr	1.3.6.1.4.1.1991.1.1.4.25.1.1.14	PhysAddress	read-only
snL4VirtualServerPortStatistic	1.3.6.1.4.1.1991.1.1.4.26
snL4VirtualServerPortStatisticTable	1.3.6.1.4.1.1991.1.1.4.26.1		not-accessible	Virtual Server Port Statistic table.
snL4VirtualServerPortStatisticEntry	1.3.6.1.4.1.1991.1.1.4.26.1.1		not-accessible	An entry in the Virtual Server Port Statistic table.
IP snL4VirtualServerPortStatisticIP	1.3.6.1.4.1.1991.1.1.4.26.1.1.1	IpAddress	read-only	The index for Virtual Server Port Statistic entry.
INT snL4VirtualServerPortStatisticPort	1.3.6.1.4.1.1991.1.1.4.26.1.1.2	INTEGER	read-only
L4S snL4VirtualServerPortStatisticServerName	1.3.6.1.4.1.1991.1.1.4.26.1.1.3	L4ServerName	read-only
I32 snL4VirtualServerPortStatisticCurrentConnection	1.3.6.1.4.1.1991.1.1.4.26.1.1.4	Integer32	read-only
C32 snL4VirtualServerPortStatisticTotalConnection	1.3.6.1.4.1.1991.1.1.4.26.1.1.5	Counter32	read-only
I32 snL4VirtualServerPortStatisticPeakConnection	1.3.6.1.4.1.1991.1.1.4.26.1.1.6	Integer32	read-only
snL4GslbSiteRemoteServerIrons	1.3.6.1.4.1.1991.1.1.4.27
snL4GslbSiteRemoteServerIronTable	1.3.6.1.4.1.1991.1.1.4.27.1		not-accessible	GSLB remote ServerIron configuration table.
snL4GslbSiteRemoteServerIronEntry	1.3.6.1.4.1.1991.1.1.4.27.1.1		not-accessible	An entry of a GSLB remote ServerIron configuration.
IP snL4GslbSiteRemoteServerIronIP	1.3.6.1.4.1.1991.1.1.4.27.1.1.1	IpAddress	read-only	The index for each remote ServerIron in a site.
INT snL4GslbSiteRemoteServerIronPreference	1.3.6.1.4.1.1991.1.1.4.27.1.1.2	INTEGER	read-write	The preference of a remote ServerIron. The default value is 128.
snL4History	1.3.6.1.4.1.1991.1.1.4.28
snL4RealServerHistoryControlTable	1.3.6.1.4.1.1991.1.1.4.28.1		not-accessible	A list of history control entries.
snL4RealServerHistoryControlEntry	1.3.6.1.4.1.1991.1.1.4.28.1.1		not-accessible	A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerHistoryControlInterval object might be named snL4RealServerHistoryControlInterval.2
INT snL4RealServerHistoryControlIndex	1.3.6.1.4.1.1991.1.1.4.28.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the snL4RealServerHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device.
OID snL4RealServerHistoryControlDataSource	1.3.6.1.4.1.1991.1.1.4.28.1.1.2	OBJECT IDENTIFIER	read-write	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1).
INT snL4RealServerHistoryControlBucketsRequested	1.3.6.1.4.1.1991.1.1.4.28.1.1.3	INTEGER	read-write	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. When this object is created or modified, the probe should set snL4RealServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
INT snL4RealServerHistoryControlBucketsGranted	1.3.6.1.4.1.1991.1.1.4.28.1.1.4	INTEGER	read-only	The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. When the associated snL4RealServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4RealServerHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4RealServerHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
INT snL4RealServerHistoryControlInterval	1.3.6.1.4.1.1991.1.1.4.28.1.1.5	INTEGER	read-write	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4RealServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1).
STR snL4RealServerHistoryControlOwner	1.3.6.1.4.1.1991.1.1.4.28.1.1.6	DisplayString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
INT snL4RealServerHistoryControlStatus	1.3.6.1.4.1.1991.1.1.4.28.1.1.7	INTEGER	read-write	The status of this snL4RealServerHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerHistoryControlEntry will be deleted by the agent if this snL4RealServerHistoryControlEntry is not equal to valid(1).
snL4RealServerHistoryTable	1.3.6.1.4.1.1991.1.1.4.28.2		not-accessible	A list of Ethernet snL4History entries.
snL4RealServerHistoryEntry	1.3.6.1.4.1.1991.1.1.4.28.2.1		not-accessible	An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4RealServerHistoryControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the snL4RealServerHistoryReceivePkts object might be named snL4RealServerHistoryReceivePkts.2.89
INT snL4RealServerHistoryIndex	1.3.6.1.4.1.1991.1.1.4.28.2.1.1	INTEGER	read-only	The snL4RealServerHistory of which this entry is a part.The snL4RealServerHistory identified by a particular value of this index is the same snL4RealServerHistory as identified by the same value of snL4RealServerHistoryControlIndex.
INT snL4RealServerHistorySampleIndex	1.3.6.1.4.1.1991.1.1.4.28.2.1.2	INTEGER	read-only	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4RealServerHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
TIK snL4RealServerHistoryIntervalStart	1.3.6.1.4.1.1991.1.1.4.28.2.1.3	TimeTicks	read-only	The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first sample of the snL4RealServerHistory at a time such that when the next hour of the day begins, a sample is started at that instant.Note that following this rule may require the probe to delay collecting the first sample of the snL4RealServerHistory, as each sample must be of the same interval.Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
C32 snL4RealServerHistoryReceivePkts	1.3.6.1.4.1.1991.1.1.4.28.2.1.4	Counter32	read-only
C32 snL4RealServerHistoryTransmitPkts	1.3.6.1.4.1.1991.1.1.4.28.2.1.5	Counter32	read-only
C32 snL4RealServerHistoryTotalConnections	1.3.6.1.4.1.1991.1.1.4.28.2.1.6	Counter32	read-only
I32 snL4RealServerHistoryCurConnections	1.3.6.1.4.1.1991.1.1.4.28.2.1.7	Integer32	read-only
I32 snL4RealServerHistoryPeakConnections	1.3.6.1.4.1.1991.1.1.4.28.2.1.8	Integer32	read-only
I32 snL4RealServerHistoryReassignments	1.3.6.1.4.1.1991.1.1.4.28.2.1.9	Integer32	read-only
snL4RealServerPortHistoryControlTable	1.3.6.1.4.1.1991.1.1.4.28.3		not-accessible	A list of history control entries.
snL4RealServerPortHistoryControlEntry	1.3.6.1.4.1.1991.1.1.4.28.3.1		not-accessible	A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerPortHistoryControlInterval object might be named snL4RealServerPortHistoryControlInterval.2
INT snL4RealServerPortHistoryControlIndex	1.3.6.1.4.1.1991.1.1.4.28.3.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the snL4RealServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device.
OID snL4RealServerPortHistoryControlDataSource	1.3.6.1.4.1.1991.1.1.4.28.3.1.2	OBJECT IDENTIFIER	read-write	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerPortHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1).
INT snL4RealServerPortHistoryControlBucketsRequested	1.3.6.1.4.1.1991.1.1.4.28.3.1.3	INTEGER	read-write	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. When this object is created or modified, the probe should set snL4RealServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
INT snL4RealServerPortHistoryControlBucketsGranted	1.3.6.1.4.1.1991.1.1.4.28.3.1.4	INTEGER	read-only	The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. When the associated snL4RealServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4RealServerPortHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4RealServerPortHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
INT snL4RealServerPortHistoryControlInterval	1.3.6.1.4.1.1991.1.1.4.28.3.1.5	INTEGER	read-write	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4RealServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1).
STR snL4RealServerPortHistoryControlOwner	1.3.6.1.4.1.1991.1.1.4.28.3.1.6	DisplayString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
INT snL4RealServerPortHistoryControlStatus	1.3.6.1.4.1.1991.1.1.4.28.3.1.7	INTEGER	read-write	The status of this snL4RealServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerPortHistoryControlEntry will be deleted by the agent if this snL4RealServerPortHistoryControlEntry is not equal to valid(1).
snL4RealServerPortHistoryTable	1.3.6.1.4.1.1991.1.1.4.28.4		not-accessible	A list of Ethernet snL4History entries.
snL4RealServerPortHistoryEntry	1.3.6.1.4.1.1991.1.1.4.28.4.1		not-accessible	An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4RealServerPortHistoryControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the snL4RealServerPortHistoryReceivePkts object might be named snL4RealServerPortHistoryReceivePkts.2.89
INT snL4RealServerPortHistoryIndex	1.3.6.1.4.1.1991.1.1.4.28.4.1.1	INTEGER	read-only	The snL4RealServerPortHistory of which this entry is a part.The snL4RealServerPortHistory identified by a particular value of this index is the same snL4RealServerPortHistory as identified by the same value of snL4RealServerPortHistoryControlIndex.
INT snL4RealServerPortHistorySampleIndex	1.3.6.1.4.1.1991.1.1.4.28.4.1.2	INTEGER	read-only	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4RealServerPortHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
TIK snL4RealServerPortHistoryIntervalStart	1.3.6.1.4.1.1991.1.1.4.28.4.1.3	TimeTicks	read-only	The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first sample of the snL4RealServerPortHistory at a time such that when the next hour of the day begins, a sample is started at that instant.Note that following this rule may require the probe to delay collecting the first sample of the snL4RealServerPortHistory, as each sample must be of the same interval.Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
C32 snL4RealServerPortHistoryReceivePkts	1.3.6.1.4.1.1991.1.1.4.28.4.1.4	Counter32	read-only
C32 snL4RealServerPortHistoryTransmitPkts	1.3.6.1.4.1.1991.1.1.4.28.4.1.5	Counter32	read-only
C32 snL4RealServerPortHistoryTotalConnections	1.3.6.1.4.1.1991.1.1.4.28.4.1.6	Counter32	read-only
I32 snL4RealServerPortHistoryCurConnections	1.3.6.1.4.1.1991.1.1.4.28.4.1.7	Integer32	read-only
I32 snL4RealServerPortHistoryPeakConnections	1.3.6.1.4.1.1991.1.1.4.28.4.1.8	Integer32	read-only
I32 snL4RealServerPortHistoryResponseTime	1.3.6.1.4.1.1991.1.1.4.28.4.1.9	Integer32	read-only
snL4VirtualServerHistoryControlTable	1.3.6.1.4.1.1991.1.1.4.28.5		not-accessible	A list of history control entries.
snL4VirtualServerHistoryControlEntry	1.3.6.1.4.1.1991.1.1.4.28.5.1		not-accessible	A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerHistoryControlInterval object might be named snL4VirtualServerHistoryControlInterval.2
INT snL4VirtualServerHistoryControlIndex	1.3.6.1.4.1.1991.1.1.4.28.5.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the snL4VirtualServerHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device.
OID snL4VirtualServerHistoryControlDataSource	1.3.6.1.4.1.1991.1.1.4.28.5.1.2	OBJECT IDENTIFIER	read-write	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1).
INT snL4VirtualServerHistoryControlBucketsRequested	1.3.6.1.4.1.1991.1.1.4.28.5.1.3	INTEGER	read-write	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. When this object is created or modified, the probe should set snL4VirtualServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
INT snL4VirtualServerHistoryControlBucketsGranted	1.3.6.1.4.1.1991.1.1.4.28.5.1.4	INTEGER	read-only	The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. When the associated snL4VirtualServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4VirtualServerHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4VirtualServerHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
INT snL4VirtualServerHistoryControlInterval	1.3.6.1.4.1.1991.1.1.4.28.5.1.5	INTEGER	read-write	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4VirtualServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1).
STR snL4VirtualServerHistoryControlOwner	1.3.6.1.4.1.1991.1.1.4.28.5.1.6	DisplayString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
INT snL4VirtualServerHistoryControlStatus	1.3.6.1.4.1.1991.1.1.4.28.5.1.7	INTEGER	read-write	The status of this snL4VirtualServerHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerHistoryControlEntry will be deleted by the agent if this snL4VirtualServerHistoryControlEntry is not equal to valid(1).
snL4VirtualServerHistoryTable	1.3.6.1.4.1.1991.1.1.4.28.6		not-accessible	A list of Ethernet snL4History entries.
snL4VirtualServerHistoryEntry	1.3.6.1.4.1.1991.1.1.4.28.6.1		not-accessible	An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4VirtualServerHistoryControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the snL4VirtualServerHistoryReceivePkts object might be named snL4VirtualServerHistoryReceivePkts.2.89
INT snL4VirtualServerHistoryIndex	1.3.6.1.4.1.1991.1.1.4.28.6.1.1	INTEGER	read-only	The snL4VirtualServerHistory of which this entry is a part.The snL4VirtualServerHistory identified by a particular value of this index is the same snL4VirtualServerHistory as identified by the same value of snL4VirtualServerHistoryControlIndex.
INT snL4VirtualServerHistorySampleIndex	1.3.6.1.4.1.1991.1.1.4.28.6.1.2	INTEGER	read-only	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4VirtualServerHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
TIK snL4VirtualServerHistoryIntervalStart	1.3.6.1.4.1.1991.1.1.4.28.6.1.3	TimeTicks	read-only	The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first sample of the snL4VirtualServerHistory at a time such that when the next hour of the day begins, a sample is started at that instant.Note that following this rule may require the probe to delay collecting the first sample of the snL4VirtualServerHistory, as each sample must be of the same interval.Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
C32 snL4VirtualServerHistoryReceivePkts	1.3.6.1.4.1.1991.1.1.4.28.6.1.4	Counter32	read-only
C32 snL4VirtualServerHistoryTransmitPkts	1.3.6.1.4.1.1991.1.1.4.28.6.1.5	Counter32	read-only
C32 snL4VirtualServerHistoryTotalConnections	1.3.6.1.4.1.1991.1.1.4.28.6.1.6	Counter32	read-only
I32 snL4VirtualServerHistoryCurConnections	1.3.6.1.4.1.1991.1.1.4.28.6.1.7	Integer32	read-only
I32 snL4VirtualServerHistoryPeakConnections	1.3.6.1.4.1.1991.1.1.4.28.6.1.8	Integer32	read-only
snL4VirtualServerPortHistoryControlTable	1.3.6.1.4.1.1991.1.1.4.28.7		not-accessible	A list of history control entries.
snL4VirtualServerPortHistoryControlEntry	1.3.6.1.4.1.1991.1.1.4.28.7.1		not-accessible	A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerPortHistoryControlInterval object might be named snL4VirtualServerPortHistoryControlInterval.2
INT snL4VirtualServerPortHistoryControlIndex	1.3.6.1.4.1.1991.1.1.4.28.7.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the snL4VirtualServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device.
OID snL4VirtualServerPortHistoryControlDataSource	1.3.6.1.4.1.1991.1.1.4.28.7.1.2	OBJECT IDENTIFIER	read-write	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerPortHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1).
INT snL4VirtualServerPortHistoryControlBucketsRequested	1.3.6.1.4.1.1991.1.1.4.28.7.1.3	INTEGER	read-write	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. When this object is created or modified, the probe should set snL4VirtualServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
INT snL4VirtualServerPortHistoryControlBucketsGranted	1.3.6.1.4.1.1991.1.1.4.28.7.1.4	INTEGER	read-only	The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. When the associated snL4VirtualServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4VirtualServerPortHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
INT snL4VirtualServerPortHistoryControlInterval	1.3.6.1.4.1.1991.1.1.4.28.7.1.5	INTEGER	read-write	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4VirtualServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1).
STR snL4VirtualServerPortHistoryControlOwner	1.3.6.1.4.1.1991.1.1.4.28.7.1.6	DisplayString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
INT snL4VirtualServerPortHistoryControlStatus	1.3.6.1.4.1.1991.1.1.4.28.7.1.7	INTEGER	read-write	The status of this snL4VirtualServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry will be deleted by the agent if this snL4VirtualServerPortHistoryControlEntry is not equal to valid(1).
snL4VirtualServerPortHistoryTable	1.3.6.1.4.1.1991.1.1.4.28.8		not-accessible	A list of Ethernet snL4History entries.
snL4VirtualServerPortHistoryEntry	1.3.6.1.4.1.1991.1.1.4.28.8.1		not-accessible	An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4VirtualServerPortHistoryControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the snL4VirtualServerPortHistoryReceivePkts object might be named snL4VirtualServerPortHistoryReceivePkts.2.89
INT snL4VirtualServerPortHistoryIndex	1.3.6.1.4.1.1991.1.1.4.28.8.1.1	INTEGER	read-only	The snL4VirtualServerPortHistory of which this entry is a part.The snL4VirtualServerPortHistory identified by a particular value of this index is the same snL4VirtualServerPortHistory as identified by the same value of snL4VirtualServerPortHistoryControlIndex.
INT snL4VirtualServerPortHistorySampleIndex	1.3.6.1.4.1.1991.1.1.4.28.8.1.2	INTEGER	read-only	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4VirtualServerPortHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
TIK snL4VirtualServerPortHistoryIntervalStart	1.3.6.1.4.1.1991.1.1.4.28.8.1.3	TimeTicks	read-only	The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first sample of the snL4VirtualServerPortHistory at a time such that when the next hour of the day begins, a sample is started at that instant.Note that following this rule may require the probe to delay collecting the first sample of the snL4VirtualServerPortHistory, as each sample must be of the same interval.Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
C32 snL4VirtualServerPortHistoryReceivePkts	1.3.6.1.4.1.1991.1.1.4.28.8.1.4	Counter32	read-only
C32 snL4VirtualServerPortHistoryTransmitPkts	1.3.6.1.4.1.1991.1.1.4.28.8.1.5	Counter32	read-only
C32 snL4VirtualServerPortHistoryTotalConnections	1.3.6.1.4.1.1991.1.1.4.28.8.1.6	Counter32	read-only
I32 snL4VirtualServerPortHistoryCurConnections	1.3.6.1.4.1.1991.1.1.4.28.8.1.7	Integer32	read-only
I32 snL4VirtualServerPortHistoryPeakConnections	1.3.6.1.4.1.1991.1.1.4.28.8.1.8	Integer32	read-only

RFC description

Layer 4 load balancing and switching configuration for Brocade/Foundry network switches.

Start monitoring Brocade/Foundry ServerIron-class Layer 4-7 switch (server load balancing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB