BCCUSTOM-OPR-MIB

Description: Provides custom operator commands and chassis management for Cabletron/Enterasys network switch platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

This MIB module, despite its short description referencing Cabletron/Enterasys style naming, is documented in its module description as covering the T8000 Embedded switch under Brocade Communications Systems copyright, suggesting it provides custom operator commands and chassis management objects for that switch platform. With no sample objects available, its precise data model cannot be verified in detail, but by its naming and description it is expected to expose chassis-level operational controls and possibly status objects for embedded switch management functions. Given the chassis-management framing, such MIBs typically allow monitoring of overall system/chassis operational state and issuing custom operator commands, though specific hardware sensor coverage (temperature, power, fans) cannot be confirmed from available data. There is no evident dependency information from the sparse module description provided. It would be deployed on Brocade/Enterasys-lineage embedded switch platforms (T8000) in enterprise or service provider network infrastructure, where a BCCUSTOM-OPR-MIB download would be needed to load the module definitions into a MIB browser.

No sample objects were provided for this MIB, so a concrete monitoring scenario referencing real object names cannot be constructed; the module description only indicates it covers custom operator commands and chassis details for the T8000 Embedded switch. In practice, a MIB of this type would typically be polled to check chassis-level operational status and to issue or track vendor-specific operator commands, but without object names this remains a general inference rather than a grounded example. Further inspection of the actual MIB source would be needed to identify concrete monitorable objects.

Brocade T8000 embedded switch custom operations for firmware upgrades and support data collection via FTP.